mtd: remove the ixp2000 map driver

[linux-2.6-microblaze.git] / drivers / mtd / maps / Kconfig

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 62ba82c..4b70976 100644 (file)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -249,22 +249,6 @@ config MTD_LANTIQ
        help
          Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
 
        help
          Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
 

-config MTD_DILNETPC
-       tristate "CFI Flash device mapped on DIL/Net PC"
-       depends on X86 && MTD_CFI_INTELEXT && BROKEN
-       help
-         MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
-         For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
-         and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
-
-config MTD_DILNETPC_BOOTSIZE
-       hex "Size of DIL/Net PC flash boot partition"
-       depends on MTD_DILNETPC
-       default "0x80000"
-       help
-         The amount of space taken up by the kernel or Etherboot
-         on the DIL/Net PC flash chips.
-

 config MTD_L440GX
        tristate "BIOS flash chip on Intel L440GX boards"
        depends on X86 && MTD_JEDECPROBE
 config MTD_L440GX
        tristate "BIOS flash chip on Intel L440GX boards"
        depends on X86 && MTD_JEDECPROBE


@@ -274,42 +258,6 @@ config MTD_L440GX
 
          BE VERY CAREFUL.
 
 
          BE VERY CAREFUL.
 

-config MTD_TQM8XXL
-       tristate "CFI Flash device mapped on TQM8XXL"
-       depends on MTD_CFI && TQM8xxL
-       help
-         The TQM8xxL PowerPC board has up to two banks of CFI-compliant
-         chips, currently uses AMD one. This 'mapping' driver supports
-         that arrangement, allowing the CFI probe and command set driver
-         code to communicate with the chips on the TQM8xxL board. More at
-         <http://www.denx.de/wiki/PPCEmbedded/>.
-
-config MTD_RPXLITE
-       tristate "CFI Flash device mapped on RPX Lite or CLLF"
-       depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
-       help
-         The RPXLite PowerPC board has CFI-compliant chips mapped in
-         a strange sparse mapping. This 'mapping' driver supports that
-         arrangement, allowing the CFI probe and command set driver code
-         to communicate with the chips on the RPXLite board. More at
-         <http://www.embeddedplanet.com/>.
-
-config MTD_MBX860
-       tristate "System flash on MBX860 board"
-       depends on MTD_CFI && MBX
-       help
-         This enables access routines for the flash chips on the Motorola
-         MBX860 board. If you have one of these boards and would like
-         to use the flash chips on it, say 'Y'.
-
-config MTD_DBOX2
-       tristate "CFI Flash device mapped on D-Box2"
-       depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
-       help
-         This enables access routines for the flash chips on the Nokia/Sagem
-         D-Box 2 board. If you have one of these boards and would like to use
-         the flash chips on it, say 'Y'.
-

 config MTD_CFI_FLAGADM
        tristate "CFI Flash device mapping on FlagaDM"
        depends on 8xx && MTD_CFI
 config MTD_CFI_FLAGADM
        tristate "CFI Flash device mapping on FlagaDM"
        depends on 8xx && MTD_CFI


@@ -349,15 +297,6 @@ config MTD_IXP4XX
          IXDP425 and Coyote. If you have an IXP4xx based board and
          would like to use the flash chips on it, say 'Y'.
 
          IXDP425 and Coyote. If you have an IXP4xx based board and
          would like to use the flash chips on it, say 'Y'.
 

-config MTD_IXP2000
-       tristate "CFI Flash device mapped on Intel IXP2000 based systems"
-       depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
-       help
-         This enables MTD access to flash devices on platforms based
-         on Intel's IXP2000 family of network processors. If you have an
-         IXP2000 based board and would like to use the flash chips on it,
-         say 'Y'.
-

 config MTD_AUTCPU12
        bool "NV-RAM mapping AUTCPU12 board"
        depends on ARCH_AUTCPU12
 config MTD_AUTCPU12
        bool "NV-RAM mapping AUTCPU12 board"
        depends on ARCH_AUTCPU12


@@ -429,19 +368,10 @@ config MTD_GPIO_ADDR
 
 config MTD_UCLINUX
        bool "Generic uClinux RAM/ROM filesystem support"
 
 config MTD_UCLINUX
        bool "Generic uClinux RAM/ROM filesystem support"

-       depends on MTD_RAM=y && (!MMU || COLDFIRE)
+       depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)

        help
          Map driver to support image based filesystems for uClinux.
 
        help
          Map driver to support image based filesystems for uClinux.
 

-config MTD_DMV182
-        tristate "Map driver for Dy-4 SVME/DMV-182 board."
-        depends on DMV182
-       select MTD_MAP_BANK_WIDTH_32
-       select MTD_CFI_I8
-       select MTD_CFI_AMDSTD
-        help
-          Map driver for Dy-4 SVME/DMV-182 board.
-

 config MTD_INTEL_VR_NOR
        tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
        depends on PCI
 config MTD_INTEL_VR_NOR
        tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
        depends on PCI