# SPDX-License-Identifier: GPL-2.0-only config STMMAC_ETH tristate "STMicroelectronics Multi-Gigabit Ethernet driver" depends on HAS_IOMEM && HAS_DMA depends on PTP_1588_CLOCK_OPTIONAL select MII select PCS_XPCS select PAGE_POOL select PHYLINK select CRC32 select RESET_CONTROLLER help This is the driver for the Ethernet IPs built around a Synopsys IP Core. if STMMAC_ETH config STMMAC_SELFTESTS bool "Support for STMMAC Selftests" depends on INET depends on STMMAC_ETH default n help This adds support for STMMAC Selftests using ethtool. Enable this feature if you are facing problems with your HW and submit the test results to the netdev Mailing List. config STMMAC_PLATFORM tristate "STMMAC Platform bus support" depends on STMMAC_ETH select MFD_SYSCON default y help This selects the platform specific bus support for the stmmac driver. This is the driver used on several SoCs: STi, Allwinner, Amlogic Meson, Altera SOCFPGA. If you have a controller with this interface, say Y or M here. If unsure, say N. if STMMAC_PLATFORM config DWMAC_DWC_QOS_ETH tristate "Support for snps,dwc-qos-ethernet.txt DT binding." select CRC32 select MII depends on OF && HAS_DMA help Support for chips using the snps,dwc-qos-ethernet.txt DT binding. config DWMAC_GENERIC tristate "Generic driver for DWMAC" default STMMAC_PLATFORM help Generic DWMAC driver for platforms that don't require any platform specific code to function or is using platform data for setup. config DWMAC_ANARION tristate "Adaptrum Anarion GMAC support" default ARC depends on OF && (ARC || COMPILE_TEST) help Support for Adaptrum Anarion GMAC Ethernet controller. This selects the Anarion SoC glue layer support for the stmmac driver. config DWMAC_INGENIC tristate "Ingenic MAC support" default MACH_INGENIC depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on Ingenic SoCs. This selects Ingenic SoCs glue layer support for the stmmac device driver. This driver is used on for the Ingenic SoCs MAC ethernet controller. config DWMAC_IPQ806X tristate "QCA IPQ806x DWMAC support" default ARCH_QCOM depends on OF && (ARCH_QCOM || COMPILE_TEST) select MFD_SYSCON help Support for QCA IPQ806X DWMAC Ethernet. This selects the IPQ806x SoC glue layer support for the stmmac device driver. This driver does not use any of the hardware acceleration features available on this SoC. Network devices will behave like standard non-accelerated ethernet interfaces. Select the QCOM_SOCINFO config flag to enable specific dwmac fixup based on the ipq806x SoC revision. config DWMAC_LPC18XX tristate "NXP LPC18xx/43xx DWMAC support" default ARCH_LPC18XX depends on OF && (ARCH_LPC18XX || COMPILE_TEST) select MFD_SYSCON help Support for NXP LPC18xx/43xx DWMAC Ethernet. config DWMAC_MEDIATEK tristate "MediaTek MT27xx GMAC support" depends on OF && (ARCH_MEDIATEK || COMPILE_TEST) help Support for MediaTek GMAC Ethernet controller. This selects the MT2712 SoC support for the stmmac driver. config DWMAC_MESON tristate "Amlogic Meson dwmac support" default ARCH_MESON depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) help Support for Ethernet controller on Amlogic Meson SoCs. This selects the Amlogic Meson SoC glue layer support for the stmmac device driver. This driver is used for Meson6, Meson8, Meson8b and GXBB SoCs. config DWMAC_QCOM_ETHQOS tristate "Qualcomm ETHQOS support" default ARCH_QCOM depends on OF && (ARCH_QCOM || COMPILE_TEST) help Support for the Qualcomm ETHQOS core. This selects the Qualcomm ETHQOS glue layer support for the stmmac device driver. config DWMAC_ROCKCHIP tristate "Rockchip dwmac support" default ARCH_ROCKCHIP depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) select MFD_SYSCON help Support for Ethernet controller on Rockchip RK3288 SoC. This selects the Rockchip RK3288 SoC glue layer support for the stmmac device driver. config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_INTEL_SOCFPGA depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) select MFD_SYSCON select MDIO_REGMAP select REGMAP_MMIO select PCS_LYNX help Support for ethernet controller on Altera SOCFPGA This selects the Altera SOCFPGA SoC glue layer support for the stmmac device driver. This driver is used for arria5 and cyclone5 FPGA SoCs. config DWMAC_STARFIVE tristate "StarFive dwmac support" depends on OF && (ARCH_STARFIVE || COMPILE_TEST) select MFD_SYSCON default m if ARCH_STARFIVE help Support for ethernet controllers on StarFive RISC-V SoCs This selects the StarFive platform specific glue layer support for the stmmac device driver. This driver is used for the StarFive JH7100 and JH7110 ethernet controllers. config DWMAC_STI tristate "STi GMAC support" default ARCH_STI depends on OF && (ARCH_STI || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on STi SOCs. This selects STi SoC glue layer support for the stmmac device driver. This driver is used on for the STi series SOCs GMAC ethernet controller. config DWMAC_STM32 tristate "STM32 DWMAC support" default ARCH_STM32 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on STM32 SOCs. This selects STM32 SoC glue layer support for the stmmac device driver. This driver is used on for the STM32 series SOCs GMAC ethernet controller. config DWMAC_SUNXI tristate "Allwinner GMAC support" default ARCH_SUNXI depends on OF && (ARCH_SUNXI || COMPILE_TEST) help Support for Allwinner A20/A31 GMAC ethernet controllers. This selects Allwinner SoC glue layer support for the stmmac device driver. This driver is used for A20/A31 GMAC ethernet controller. config DWMAC_SUN8I tristate "Allwinner sun8i GMAC support" default ARCH_SUNXI depends on OF && (ARCH_SUNXI || COMPILE_TEST) select MDIO_BUS_MUX help Support for Allwinner H3 A83T A64 EMAC ethernet controllers. This selects Allwinner SoC glue layer support for the stmmac device driver. This driver is used for H3/A83T/A64 EMAC ethernet controller. config DWMAC_IMX8 tristate "NXP IMX8 DWMAC support" default ARCH_MXC depends on OF && (ARCH_MXC || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on NXP i.MX8 SOCs. This selects NXP SoC glue layer support for the stmmac device driver. This driver is used for i.MX8 series like iMX8MP/iMX8DXL GMAC ethernet controller. config DWMAC_INTEL_PLAT tristate "Intel dwmac support" depends on OF && COMMON_CLK depends on STMMAC_ETH help Support for ethernet controllers on Intel SoCs This selects the Intel platform specific glue layer support for the stmmac device driver. This driver is used for the Intel Keem Bay SoC. config DWMAC_LOONGSON1 tristate "Loongson1 GMAC support" default MACH_LOONGSON32 depends on OF && (MACH_LOONGSON32 || COMPILE_TEST) help Support for ethernet controller on Loongson1 SoC. This selects Loongson1 SoC glue layer support for the stmmac device driver. This driver is used for Loongson1-based boards like Loongson LS1B/LS1C. config DWMAC_TEGRA tristate "NVIDIA Tegra MGBE support" depends on ARCH_TEGRA || COMPILE_TEST help This selects the Multi-GigaBit Ethernet (MGBE) Controller that is found on the NVIDIA Tegra SoC devices. This driver provides the glue layer on top of the stmmac driver required for these NVIDIA Tegra SoC devices. config DWMAC_VISCONTI tristate "Toshiba Visconti DWMAC support" default ARCH_VISCONTI depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) help Support for ethernet controller on Visconti SoCs. endif config DWMAC_INTEL tristate "Intel GMAC support" default X86 depends on X86 && STMMAC_ETH && PCI depends on COMMON_CLK help This selects the Intel platform specific bus support for the stmmac driver. This driver is used for Intel Quark/EHL/TGL. config DWMAC_LOONGSON tristate "Loongson PCI DWMAC support" default MACH_LOONGSON64 depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI depends on COMMON_CLK help This selects the LOONGSON PCI bus support for the stmmac driver, Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. config STMMAC_PCI tristate "STMMAC PCI bus support" depends on STMMAC_ETH && PCI depends on COMMON_CLK help This selects the platform specific bus support for the stmmac driver. This driver was tested on XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. If you have a controller with this interface, say Y or M here. If unsure, say N. endif