powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
[linux-2.6-microblaze.git] / sound / soc / intel / catpt / dsp.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 //
3 // Copyright(c) 2020 Intel Corporation. All rights reserved.
4 //
5 // Author: Cezary Rojewski <cezary.rojewski@intel.com>
6 //
7
8 #include <linux/devcoredump.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/firmware.h>
11 #include <linux/pci.h>
12 #include <linux/pxa2xx_ssp.h>
13 #include "core.h"
14 #include "messages.h"
15 #include "registers.h"
16
17 static bool catpt_dma_filter(struct dma_chan *chan, void *param)
18 {
19         return param == chan->device->dev;
20 }
21
22 /*
23  * Either engine 0 or 1 can be used for image loading.
24  * Align with Windows driver equivalent and stick to engine 1.
25  */
26 #define CATPT_DMA_DEVID         1
27 #define CATPT_DMA_DSP_ADDR_MASK GENMASK(31, 20)
28
29 struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev)
30 {
31         struct dma_slave_config config;
32         struct dma_chan *chan;
33         dma_cap_mask_t mask;
34         int ret;
35
36         dma_cap_zero(mask);
37         dma_cap_set(DMA_MEMCPY, mask);
38
39         chan = dma_request_channel(mask, catpt_dma_filter, cdev->dev);
40         if (!chan) {
41                 dev_err(cdev->dev, "request channel failed\n");
42                 return ERR_PTR(-ENODEV);
43         }
44
45         memset(&config, 0, sizeof(config));
46         config.direction = DMA_MEM_TO_DEV;
47         config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
48         config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
49         config.src_maxburst = 16;
50         config.dst_maxburst = 16;
51
52         ret = dmaengine_slave_config(chan, &config);
53         if (ret) {
54                 dev_err(cdev->dev, "slave config failed: %d\n", ret);
55                 dma_release_channel(chan);
56                 return ERR_PTR(ret);
57         }
58
59         return chan;
60 }
61
62 static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
63                             dma_addr_t dst_addr, dma_addr_t src_addr,
64                             size_t size)
65 {
66         struct dma_async_tx_descriptor *desc;
67         enum dma_status status;
68
69         desc = dmaengine_prep_dma_memcpy(chan, dst_addr, src_addr, size,
70                                          DMA_CTRL_ACK);
71         if (!desc) {
72                 dev_err(cdev->dev, "prep dma memcpy failed\n");
73                 return -EIO;
74         }
75
76         /* enable demand mode for dma channel */
77         catpt_updatel_shim(cdev, HMDC,
78                            CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id),
79                            CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id));
80         dmaengine_submit(desc);
81         status = dma_wait_for_async_tx(desc);
82         /* regardless of status, disable access to HOST memory in demand mode */
83         catpt_updatel_shim(cdev, HMDC,
84                            CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), 0);
85
86         return (status == DMA_COMPLETE) ? 0 : -EPROTO;
87 }
88
89 int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan,
90                            dma_addr_t dst_addr, dma_addr_t src_addr,
91                            size_t size)
92 {
93         return catpt_dma_memcpy(cdev, chan, dst_addr | CATPT_DMA_DSP_ADDR_MASK,
94                                 src_addr, size);
95 }
96
97 int catpt_dma_memcpy_fromdsp(struct catpt_dev *cdev, struct dma_chan *chan,
98                              dma_addr_t dst_addr, dma_addr_t src_addr,
99                              size_t size)
100 {
101         return catpt_dma_memcpy(cdev, chan, dst_addr,
102                                 src_addr | CATPT_DMA_DSP_ADDR_MASK, size);
103 }
104
105 int catpt_dmac_probe(struct catpt_dev *cdev)
106 {
107         struct dw_dma_chip *dmac;
108         int ret;
109
110         dmac = devm_kzalloc(cdev->dev, sizeof(*dmac), GFP_KERNEL);
111         if (!dmac)
112                 return -ENOMEM;
113
114         dmac->regs = cdev->lpe_ba + cdev->spec->host_dma_offset[CATPT_DMA_DEVID];
115         dmac->dev = cdev->dev;
116         dmac->irq = cdev->irq;
117
118         ret = dma_coerce_mask_and_coherent(cdev->dev, DMA_BIT_MASK(31));
119         if (ret)
120                 return ret;
121         /*
122          * Caller is responsible for putting device in D0 to allow
123          * for I/O and memory access before probing DW.
124          */
125         ret = dw_dma_probe(dmac);
126         if (ret)
127                 return ret;
128
129         cdev->dmac = dmac;
130         return 0;
131 }
132
133 void catpt_dmac_remove(struct catpt_dev *cdev)
134 {
135         /*
136          * As do_dma_remove() juggles with pm_runtime_get_xxx() and
137          * pm_runtime_put_xxx() while both ADSP and DW 'devices' are part of
138          * the same module, caller makes sure pm_runtime_disable() is invoked
139          * before removing DW to prevent postmortem resume and suspend.
140          */
141         dw_dma_remove(cdev->dmac);
142 }
143
144 static void catpt_dsp_set_srampge(struct catpt_dev *cdev, struct resource *sram,
145                                   unsigned long mask, unsigned long new)
146 {
147         unsigned long old;
148         u32 off = sram->start;
149         u32 b = __ffs(mask);
150
151         old = catpt_readl_pci(cdev, VDRTCTL0) & mask;
152         dev_dbg(cdev->dev, "SRAMPGE [0x%08lx] 0x%08lx -> 0x%08lx",
153                 mask, old, new);
154
155         if (old == new)
156                 return;
157
158         catpt_updatel_pci(cdev, VDRTCTL0, mask, new);
159         /* wait for SRAM power gating to propagate */
160         udelay(60);
161
162         /*
163          * Dummy read as the very first access after block enable
164          * to prevent byte loss in future operations.
165          */
166         for_each_clear_bit_from(b, &new, fls_long(mask)) {
167                 u8 buf[4];
168
169                 /* newly enabled: new bit=0 while old bit=1 */
170                 if (test_bit(b, &old)) {
171                         dev_dbg(cdev->dev, "sanitize block %ld: off 0x%08x\n",
172                                 b - __ffs(mask), off);
173                         memcpy_fromio(buf, cdev->lpe_ba + off, sizeof(buf));
174                 }
175                 off += CATPT_MEMBLOCK_SIZE;
176         }
177 }
178
179 void catpt_dsp_update_srampge(struct catpt_dev *cdev, struct resource *sram,
180                               unsigned long mask)
181 {
182         struct resource *res;
183         unsigned long new = 0;
184
185         /* flag all busy blocks */
186         for (res = sram->child; res; res = res->sibling) {
187                 u32 h, l;
188
189                 h = (res->end - sram->start) / CATPT_MEMBLOCK_SIZE;
190                 l = (res->start - sram->start) / CATPT_MEMBLOCK_SIZE;
191                 new |= GENMASK(h, l);
192         }
193
194         /* offset value given mask's start and invert it as ON=b0 */
195         new = ~(new << __ffs(mask)) & mask;
196
197         /* disable core clock gating */
198         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0);
199
200         catpt_dsp_set_srampge(cdev, sram, mask, new);
201
202         /* enable core clock gating */
203         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE,
204                           CATPT_VDRTCTL2_DCLCGE);
205 }
206
207 int catpt_dsp_stall(struct catpt_dev *cdev, bool stall)
208 {
209         u32 reg, val;
210
211         val = stall ? CATPT_CS_STALL : 0;
212         catpt_updatel_shim(cdev, CS1, CATPT_CS_STALL, val);
213
214         return catpt_readl_poll_shim(cdev, CS1,
215                                      reg, (reg & CATPT_CS_STALL) == val,
216                                      500, 10000);
217 }
218
219 static int catpt_dsp_reset(struct catpt_dev *cdev, bool reset)
220 {
221         u32 reg, val;
222
223         val = reset ? CATPT_CS_RST : 0;
224         catpt_updatel_shim(cdev, CS1, CATPT_CS_RST, val);
225
226         return catpt_readl_poll_shim(cdev, CS1,
227                                      reg, (reg & CATPT_CS_RST) == val,
228                                      500, 10000);
229 }
230
231 void lpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable)
232 {
233         u32 val;
234
235         val = enable ? LPT_VDRTCTL0_APLLSE : 0;
236         catpt_updatel_pci(cdev, VDRTCTL0, LPT_VDRTCTL0_APLLSE, val);
237 }
238
239 void wpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable)
240 {
241         u32 val;
242
243         val = enable ? WPT_VDRTCTL2_APLLSE : 0;
244         catpt_updatel_pci(cdev, VDRTCTL2, WPT_VDRTCTL2_APLLSE, val);
245 }
246
247 static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)
248 {
249         u32 mask, reg, val;
250         int ret;
251
252         mutex_lock(&cdev->clk_mutex);
253
254         val = lp ? CATPT_CS_LPCS : 0;
255         reg = catpt_readl_shim(cdev, CS1) & CATPT_CS_LPCS;
256         dev_dbg(cdev->dev, "LPCS [0x%08lx] 0x%08x -> 0x%08x",
257                 CATPT_CS_LPCS, reg, val);
258
259         if (reg == val) {
260                 mutex_unlock(&cdev->clk_mutex);
261                 return 0;
262         }
263
264         if (waiti) {
265                 /* wait for DSP to signal WAIT state */
266                 ret = catpt_readl_poll_shim(cdev, ISD,
267                                             reg, (reg & CATPT_ISD_DCPWM),
268                                             500, 10000);
269                 if (ret) {
270                         dev_err(cdev->dev, "await WAITI timeout\n");
271                         mutex_unlock(&cdev->clk_mutex);
272                         return ret;
273                 }
274         }
275
276         ret = catpt_readl_poll_shim(cdev, CLKCTL,
277                                     reg, !(reg & CATPT_CLKCTL_CFCIP),
278                                     500, 10000);
279         if (ret)
280                 dev_warn(cdev->dev, "clock change still in progress\n");
281
282         /* default to DSP core & audio fabric high clock */
283         val |= CATPT_CS_DCS_HIGH;
284         mask = CATPT_CS_LPCS | CATPT_CS_DCS;
285         catpt_updatel_shim(cdev, CS1, mask, val);
286
287         ret = catpt_readl_poll_shim(cdev, CLKCTL,
288                                     reg, !(reg & CATPT_CLKCTL_CFCIP),
289                                     500, 10000);
290         if (ret)
291                 dev_warn(cdev->dev, "clock change still in progress\n");
292
293         /* update PLL accordingly */
294         cdev->spec->pll_shutdown(cdev, lp);
295
296         mutex_unlock(&cdev->clk_mutex);
297         return 0;
298 }
299
300 int catpt_dsp_update_lpclock(struct catpt_dev *cdev)
301 {
302         struct catpt_stream_runtime *stream;
303
304         list_for_each_entry(stream, &cdev->stream_list, node)
305                 if (stream->prepared)
306                         return catpt_dsp_select_lpclock(cdev, false, true);
307
308         return catpt_dsp_select_lpclock(cdev, true, true);
309 }
310
311 /* bring registers to their defaults as HW won't reset itself */
312 static void catpt_dsp_set_regs_defaults(struct catpt_dev *cdev)
313 {
314         int i;
315
316         catpt_writel_shim(cdev, CS1, CATPT_CS_DEFAULT);
317         catpt_writel_shim(cdev, ISC, CATPT_ISC_DEFAULT);
318         catpt_writel_shim(cdev, ISD, CATPT_ISD_DEFAULT);
319         catpt_writel_shim(cdev, IMC, CATPT_IMC_DEFAULT);
320         catpt_writel_shim(cdev, IMD, CATPT_IMD_DEFAULT);
321         catpt_writel_shim(cdev, IPCC, CATPT_IPCC_DEFAULT);
322         catpt_writel_shim(cdev, IPCD, CATPT_IPCD_DEFAULT);
323         catpt_writel_shim(cdev, CLKCTL, CATPT_CLKCTL_DEFAULT);
324         catpt_writel_shim(cdev, CS2, CATPT_CS2_DEFAULT);
325         catpt_writel_shim(cdev, LTRC, CATPT_LTRC_DEFAULT);
326         catpt_writel_shim(cdev, HMDC, CATPT_HMDC_DEFAULT);
327
328         for (i = 0; i < CATPT_SSP_COUNT; i++) {
329                 catpt_writel_ssp(cdev, i, SSCR0, CATPT_SSC0_DEFAULT);
330                 catpt_writel_ssp(cdev, i, SSCR1, CATPT_SSC1_DEFAULT);
331                 catpt_writel_ssp(cdev, i, SSSR, CATPT_SSS_DEFAULT);
332                 catpt_writel_ssp(cdev, i, SSITR, CATPT_SSIT_DEFAULT);
333                 catpt_writel_ssp(cdev, i, SSDR, CATPT_SSD_DEFAULT);
334                 catpt_writel_ssp(cdev, i, SSTO, CATPT_SSTO_DEFAULT);
335                 catpt_writel_ssp(cdev, i, SSPSP, CATPT_SSPSP_DEFAULT);
336                 catpt_writel_ssp(cdev, i, SSTSA, CATPT_SSTSA_DEFAULT);
337                 catpt_writel_ssp(cdev, i, SSRSA, CATPT_SSRSA_DEFAULT);
338                 catpt_writel_ssp(cdev, i, SSTSS, CATPT_SSTSS_DEFAULT);
339                 catpt_writel_ssp(cdev, i, SSCR2, CATPT_SSCR2_DEFAULT);
340                 catpt_writel_ssp(cdev, i, SSPSP2, CATPT_SSPSP2_DEFAULT);
341         }
342 }
343
344 int lpt_dsp_power_down(struct catpt_dev *cdev)
345 {
346         catpt_dsp_reset(cdev, true);
347
348         /* set 24Mhz clock for both SSPs */
349         catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1),
350                            CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1));
351         catpt_dsp_select_lpclock(cdev, true, false);
352
353         /* DRAM power gating all */
354         catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask,
355                               cdev->spec->dram_mask);
356         catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask,
357                               cdev->spec->iram_mask);
358
359         catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot);
360         /* give hw time to drop off */
361         udelay(50);
362
363         return 0;
364 }
365
366 int lpt_dsp_power_up(struct catpt_dev *cdev)
367 {
368         /* SRAM power gating none */
369         catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0);
370         catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0);
371
372         catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0);
373         /* give hw time to wake up */
374         udelay(100);
375
376         catpt_dsp_select_lpclock(cdev, false, false);
377         catpt_updatel_shim(cdev, CS1,
378                            CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1),
379                            CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1));
380         /* stagger DSP reset after clock selection */
381         udelay(50);
382
383         catpt_dsp_reset(cdev, false);
384         /* generate int deassert msg to fix inversed int logic */
385         catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0);
386
387         return 0;
388 }
389
390 int wpt_dsp_power_down(struct catpt_dev *cdev)
391 {
392         u32 mask, val;
393
394         /* disable core clock gating */
395         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0);
396
397         catpt_dsp_reset(cdev, true);
398         /* set 24Mhz clock for both SSPs */
399         catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1),
400                            CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1));
401         catpt_dsp_select_lpclock(cdev, true, false);
402         /* disable MCLK */
403         catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, 0);
404
405         catpt_dsp_set_regs_defaults(cdev);
406
407         /* switch clock gating */
408         mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE);
409         val = mask & (~CATPT_VDRTCTL2_DTCGE);
410         catpt_updatel_pci(cdev, VDRTCTL2, mask, val);
411         /* enable DTCGE separatelly */
412         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DTCGE,
413                           CATPT_VDRTCTL2_DTCGE);
414
415         /* SRAM power gating all */
416         catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask,
417                               cdev->spec->dram_mask);
418         catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask,
419                               cdev->spec->iram_mask);
420         mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD;
421         catpt_updatel_pci(cdev, VDRTCTL0, mask, WPT_VDRTCTL0_D3PGD);
422
423         catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot);
424         /* give hw time to drop off */
425         udelay(50);
426
427         /* enable core clock gating */
428         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE,
429                           CATPT_VDRTCTL2_DCLCGE);
430         udelay(50);
431
432         return 0;
433 }
434
435 int wpt_dsp_power_up(struct catpt_dev *cdev)
436 {
437         u32 mask, val;
438
439         /* disable core clock gating */
440         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0);
441
442         /* switch clock gating */
443         mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE);
444         val = mask & (~CATPT_VDRTCTL2_DTCGE);
445         catpt_updatel_pci(cdev, VDRTCTL2, mask, val);
446
447         catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0);
448
449         /* SRAM power gating none */
450         mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD;
451         catpt_updatel_pci(cdev, VDRTCTL0, mask, mask);
452         catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0);
453         catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0);
454
455         catpt_dsp_set_regs_defaults(cdev);
456
457         /* restore MCLK */
458         catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, CATPT_CLKCTL_SMOS);
459         catpt_dsp_select_lpclock(cdev, false, false);
460         /* set 24Mhz clock for both SSPs */
461         catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1),
462                            CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1));
463         catpt_dsp_reset(cdev, false);
464
465         /* enable core clock gating */
466         catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE,
467                           CATPT_VDRTCTL2_DCLCGE);
468
469         /* generate int deassert msg to fix inversed int logic */
470         catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0);
471
472         return 0;
473 }
474
475 #define CATPT_DUMP_MAGIC                0xcd42
476 #define CATPT_DUMP_SECTION_ID_FILE      0x00
477 #define CATPT_DUMP_SECTION_ID_IRAM      0x01
478 #define CATPT_DUMP_SECTION_ID_DRAM      0x02
479 #define CATPT_DUMP_SECTION_ID_REGS      0x03
480 #define CATPT_DUMP_HASH_SIZE            20
481
482 struct catpt_dump_section_hdr {
483         u16 magic;
484         u8 core_id;
485         u8 section_id;
486         u32 size;
487 };
488
489 int catpt_coredump(struct catpt_dev *cdev)
490 {
491         struct catpt_dump_section_hdr *hdr;
492         size_t dump_size, regs_size;
493         u8 *dump, *pos;
494         const char *eof;
495         char *info;
496         int i;
497
498         regs_size = CATPT_SHIM_REGS_SIZE;
499         regs_size += CATPT_DMA_COUNT * CATPT_DMA_REGS_SIZE;
500         regs_size += CATPT_SSP_COUNT * CATPT_SSP_REGS_SIZE;
501         dump_size = resource_size(&cdev->dram);
502         dump_size += resource_size(&cdev->iram);
503         dump_size += regs_size;
504         /* account for header of each section and hash chunk */
505         dump_size += 4 * sizeof(*hdr) + CATPT_DUMP_HASH_SIZE;
506
507         dump = vzalloc(dump_size);
508         if (!dump)
509                 return -ENOMEM;
510
511         pos = dump;
512
513         hdr = (struct catpt_dump_section_hdr *)pos;
514         hdr->magic = CATPT_DUMP_MAGIC;
515         hdr->core_id = cdev->spec->core_id;
516         hdr->section_id = CATPT_DUMP_SECTION_ID_FILE;
517         hdr->size = dump_size - sizeof(*hdr);
518         pos += sizeof(*hdr);
519
520         info = cdev->ipc.config.fw_info;
521         eof = info + FW_INFO_SIZE_MAX;
522         /* navigate to fifth info segment (fw hash) */
523         for (i = 0; i < 4 && info < eof; i++, info++) {
524                 /* info segments are separated by space each */
525                 info = strnchr(info, eof - info, ' ');
526                 if (!info)
527                         break;
528         }
529
530         if (i == 4 && info)
531                 memcpy(pos, info, min_t(u32, eof - info, CATPT_DUMP_HASH_SIZE));
532         pos += CATPT_DUMP_HASH_SIZE;
533
534         hdr = (struct catpt_dump_section_hdr *)pos;
535         hdr->magic = CATPT_DUMP_MAGIC;
536         hdr->core_id = cdev->spec->core_id;
537         hdr->section_id = CATPT_DUMP_SECTION_ID_IRAM;
538         hdr->size = resource_size(&cdev->iram);
539         pos += sizeof(*hdr);
540
541         memcpy_fromio(pos, cdev->lpe_ba + cdev->iram.start, hdr->size);
542         pos += hdr->size;
543
544         hdr = (struct catpt_dump_section_hdr *)pos;
545         hdr->magic = CATPT_DUMP_MAGIC;
546         hdr->core_id = cdev->spec->core_id;
547         hdr->section_id = CATPT_DUMP_SECTION_ID_DRAM;
548         hdr->size = resource_size(&cdev->dram);
549         pos += sizeof(*hdr);
550
551         memcpy_fromio(pos, cdev->lpe_ba + cdev->dram.start, hdr->size);
552         pos += hdr->size;
553
554         hdr = (struct catpt_dump_section_hdr *)pos;
555         hdr->magic = CATPT_DUMP_MAGIC;
556         hdr->core_id = cdev->spec->core_id;
557         hdr->section_id = CATPT_DUMP_SECTION_ID_REGS;
558         hdr->size = regs_size;
559         pos += sizeof(*hdr);
560
561         memcpy_fromio(pos, catpt_shim_addr(cdev), CATPT_SHIM_REGS_SIZE);
562         pos += CATPT_SHIM_REGS_SIZE;
563
564         for (i = 0; i < CATPT_SSP_COUNT; i++) {
565                 memcpy_fromio(pos, catpt_ssp_addr(cdev, i),
566                               CATPT_SSP_REGS_SIZE);
567                 pos += CATPT_SSP_REGS_SIZE;
568         }
569         for (i = 0; i < CATPT_DMA_COUNT; i++) {
570                 memcpy_fromio(pos, catpt_dma_addr(cdev, i),
571                               CATPT_DMA_REGS_SIZE);
572                 pos += CATPT_DMA_REGS_SIZE;
573         }
574
575         dev_coredumpv(cdev->dev, dump, dump_size, GFP_KERNEL);
576
577         return 0;
578 }