scripts/package/Makefile

   1 # Makefile for the different targets used to generate full packages of a kernel
   2 # It uses the generic clean infrastructure of kbuild
   3
   4 # RPM target
   5 # ---------------------------------------------------------------------------
   6 # The rpm target generates two rpm files:
   7 # /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm
   8 # /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm
   9 # The src.rpm files includes all source for the kernel being built
  10 # The <arch>.rpm includes kernel configuration, modules etc.
  11 #
  12 # Process to create the rpm files
  13 # a) clean the kernel
  14 # b) Generate .spec file
  15 # c) Build a tar ball, using symlink to make kernel version
  16 #    first entry in the path
  17 # d) and pack the result to a tar.gz file
  18 # e) generate the rpm files, based on kernel.spec
  19 # - Use /. to avoid tar packing just the symlink
  20
  21 # Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
  22 # but the binrpm-pkg target can; for some reason O= gets ignored.
  23
  24 # Do we have rpmbuild, otherwise fall back to the older rpm
  25 RPM := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
  26                    else echo rpm; fi)
  27
  28 # Remove hyphens since they have special meaning in RPM filenames
  29 KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
  30 # Include only those top-level files that are needed by make, plus the GPL copy
  31 TAR_CONTENT := $(KBUILD_ALLDIRS) kernel.spec .config .scmversion Makefile \
  32                Kbuild Kconfig COPYING $(wildcard localversion*)
  33 TAR_CONTENT := $(addprefix $(KERNELPATH)/,$(TAR_CONTENT))
  34 MKSPEC     := $(srctree)/scripts/package/mkspec
  35
  36 # rpm-pkg
  37 # ---------------------------------------------------------------------------
  38 rpm-pkg rpm: FORCE
  39         @if test "$(objtree)" != "$(srctree)"; then \
  40                 echo "Building source + binary RPM is not possible outside the"; \
  41                 echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
  42                 echo "binrpm-pkg target instead."; \
  43                 false; \
  44         fi
  45         $(MAKE) clean
  46         ln -sf $(srctree) $(KERNELPATH)
  47         $(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec
  48         $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
  49         tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(TAR_CONTENT)
  50         rm $(KERNELPATH)
  51         rm -f $(objtree)/.scmversion
  52         $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
  53         mv -f $(objtree)/.tmp_version $(objtree)/.version
  54         $(RPM) $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz
  55         rm $(KERNELPATH).tar.gz kernel.spec
  56
  57 # binrpm-pkg
  58 # ---------------------------------------------------------------------------
  59 binrpm-pkg: FORCE
  60         $(MAKE) KBUILD_SRC=
  61         $(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec
  62         $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
  63         mv -f $(objtree)/.tmp_version $(objtree)/.version
  64
  65         $(RPM) $(RPMOPTS) --define "_builddir $(objtree)" --target \
  66                 $(UTS_MACHINE) -bb $(objtree)/binkernel.spec
  67         rm binkernel.spec
  68
  69 # Deb target
  70 # ---------------------------------------------------------------------------
  71 quiet_cmd_builddeb = BUILDDEB
  72       cmd_builddeb = set -e; \
  73         test `id -u` = 0 || \
  74         test -n "$(KBUILD_PKG_ROOTCMD)" || { \
  75                 which fakeroot >/dev/null 2>&1 && \
  76                 KBUILD_PKG_ROOTCMD="fakeroot -u"; \
  77         } || { \
  78                 echo; \
  79                 echo "builddeb must be run as root (or using fakeroot)."; \
  80                 echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \
  81                 echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \
  82                 echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \
  83                 false; \
  84         } && \
  85         \
  86         $$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \
  87                 $(srctree)/scripts/package/builddeb
  88
  89 deb-pkg: FORCE
  90         $(MAKE) KBUILD_SRC=
  91         $(call cmd,builddeb)
  92
  93 clean-dirs += $(objtree)/debian/
  94
  95
  96 # tarball targets
  97 # ---------------------------------------------------------------------------
  98 tar%pkg: FORCE
  99         $(MAKE) KBUILD_SRC=
 100         $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
 101
 102 clean-dirs += $(objtree)/tar-install/
 103
 104
 105 # perf-pkg - generate a source tarball with perf source
 106 # ---------------------------------------------------------------------------
 107
 108 perf-tar=perf-$(KERNELVERSION)
 109
 110 quiet_cmd_perf_tar = TAR
 111       cmd_perf_tar = \
 112 git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/         \
 113         HEAD^{tree} $$(cd $(srctree);                               \
 114                        echo $$(cat $(srctree)/tools/perf/MANIFEST)) \
 115         -o $(perf-tar).tar;                                         \
 116 mkdir -p $(perf-tar);                                               \
 117 git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD;    \
 118 (cd $(srctree)/tools/perf;                                          \
 119 util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null);              \
 120 tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
 121 rm -r $(perf-tar);                                                  \
 122 $(if $(findstring tar-src,$@),,                                     \
 123 $(if $(findstring bz2,$@),bzip2,                                    \
 124 $(if $(findstring gz,$@),gzip,                                      \
 125 $(if $(findstring xz,$@),xz,                                        \
 126 $(error unknown target $@))))                                       \
 127         -f -9 $(perf-tar).tar)
 128
 129 perf-%pkg: FORCE
 130         $(call cmd,perf_tar)
 131
 132 # Help text displayed when executing 'make help'
 133 # ---------------------------------------------------------------------------
 134 help: FORCE
 135         @echo '  rpm-pkg             - Build both source and binary RPM kernel packages'
 136         @echo '  binrpm-pkg          - Build only the binary kernel package'
 137         @echo '  deb-pkg             - Build the kernel as a deb package'
 138         @echo '  tar-pkg             - Build the kernel as an uncompressed tarball'
 139         @echo '  targz-pkg           - Build the kernel as a gzip compressed tarball'
 140         @echo '  tarbz2-pkg          - Build the kernel as a bzip2 compressed tarball'
 141         @echo '  tarxz-pkg           - Build the kernel as a xz compressed tarball'
 142         @echo '  perf-tar-src-pkg    - Build $(perf-tar).tar source tarball'
 143         @echo '  perf-targz-src-pkg  - Build $(perf-tar).tar.gz source tarball'
 144         @echo '  perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
 145         @echo '  perf-tarxz-src-pkg  - Build $(perf-tar).tar.xz source tarball'
 146