net: dsa: tag_mtk: use the generic flow dissector procedure
[linux-2.6-microblaze.git] / net / dsa / tag_mtk.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Mediatek DSA Tag support
4  * Copyright (C) 2017 Landen Chao <landen.chao@mediatek.com>
5  *                    Sean Wang <sean.wang@mediatek.com>
6  */
7
8 #include <linux/etherdevice.h>
9 #include <linux/if_vlan.h>
10
11 #include "dsa_priv.h"
12
13 #define MTK_HDR_LEN             4
14 #define MTK_HDR_XMIT_UNTAGGED           0
15 #define MTK_HDR_XMIT_TAGGED_TPID_8100   1
16 #define MTK_HDR_RECV_SOURCE_PORT_MASK   GENMASK(2, 0)
17 #define MTK_HDR_XMIT_DP_BIT_MASK        GENMASK(5, 0)
18 #define MTK_HDR_XMIT_SA_DIS             BIT(6)
19
20 static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
21                                     struct net_device *dev)
22 {
23         struct dsa_port *dp = dsa_slave_to_port(dev);
24         u8 *mtk_tag;
25         bool is_vlan_skb = true;
26         unsigned char *dest = eth_hdr(skb)->h_dest;
27         bool is_multicast_skb = is_multicast_ether_addr(dest) &&
28                                 !is_broadcast_ether_addr(dest);
29
30         /* Build the special tag after the MAC Source Address. If VLAN header
31          * is present, it's required that VLAN header and special tag is
32          * being combined. Only in this way we can allow the switch can parse
33          * the both special and VLAN tag at the same time and then look up VLAN
34          * table with VID.
35          */
36         if (!skb_vlan_tagged(skb)) {
37                 if (skb_cow_head(skb, MTK_HDR_LEN) < 0)
38                         return NULL;
39
40                 skb_push(skb, MTK_HDR_LEN);
41                 memmove(skb->data, skb->data + MTK_HDR_LEN, 2 * ETH_ALEN);
42                 is_vlan_skb = false;
43         }
44
45         mtk_tag = skb->data + 2 * ETH_ALEN;
46
47         /* Mark tag attribute on special tag insertion to notify hardware
48          * whether that's a combined special tag with 802.1Q header.
49          */
50         mtk_tag[0] = is_vlan_skb ? MTK_HDR_XMIT_TAGGED_TPID_8100 :
51                      MTK_HDR_XMIT_UNTAGGED;
52         mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
53
54         /* Disable SA learning for multicast frames */
55         if (unlikely(is_multicast_skb))
56                 mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS;
57
58         /* Tag control information is kept for 802.1Q */
59         if (!is_vlan_skb) {
60                 mtk_tag[2] = 0;
61                 mtk_tag[3] = 0;
62         }
63
64         return skb;
65 }
66
67 static struct sk_buff *mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev,
68                                    struct packet_type *pt)
69 {
70         u16 hdr;
71         int port;
72         __be16 *phdr;
73         unsigned char *dest = eth_hdr(skb)->h_dest;
74         bool is_multicast_skb = is_multicast_ether_addr(dest) &&
75                                 !is_broadcast_ether_addr(dest);
76
77         if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
78                 return NULL;
79
80         /* The MTK header is added by the switch between src addr
81          * and ethertype at this point, skb->data points to 2 bytes
82          * after src addr so header should be 2 bytes right before.
83          */
84         phdr = (__be16 *)(skb->data - 2);
85         hdr = ntohs(*phdr);
86
87         /* Remove MTK tag and recalculate checksum. */
88         skb_pull_rcsum(skb, MTK_HDR_LEN);
89
90         memmove(skb->data - ETH_HLEN,
91                 skb->data - ETH_HLEN - MTK_HDR_LEN,
92                 2 * ETH_ALEN);
93
94         /* Get source port information */
95         port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
96
97         skb->dev = dsa_master_find_slave(dev, 0, port);
98         if (!skb->dev)
99                 return NULL;
100
101         /* Only unicast or broadcast frames are offloaded */
102         if (likely(!is_multicast_skb))
103                 skb->offload_fwd_mark = 1;
104
105         return skb;
106 }
107
108 static const struct dsa_device_ops mtk_netdev_ops = {
109         .name           = "mtk",
110         .proto          = DSA_TAG_PROTO_MTK,
111         .xmit           = mtk_tag_xmit,
112         .rcv            = mtk_tag_rcv,
113         .overhead       = MTK_HDR_LEN,
114 };
115
116 MODULE_LICENSE("GPL");
117 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_MTK);
118
119 module_dsa_tag_driver(mtk_netdev_ops);