Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...

[linux-2.6-microblaze.git] / kernel / rcu / update.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Read-Copy Update mechanism for mutual exclusion
 *
 * Copyright IBM Corporation, 2001
 *
 * Authors: Dipankar Sarma <dipankar@in.ibm.com>
 *          Manfred Spraul <manfred@colorfullife.com>
 *
 * Based on the original work by Paul McKenney <paulmck@linux.ibm.com>
 * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
 * Papers:
 * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
 * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
 *
 * For detailed explanation of Read-Copy Update mechanism see -
 *              http://lse.sourceforge.net/locking/rcupdate.html
 *
 */
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/sched/signal.h>
#include <linux/sched/debug.h>
#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/export.h>
#include <linux/hardirq.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/kthread.h>
#include <linux/tick.h>
#include <linux/rcupdate_wait.h>
#include <linux/sched/isolation.h>
#include <linux/kprobes.h>
#include <linux/slab.h>

#define CREATE_TRACE_POINTS

#include "rcu.h"

#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
#define MODULE_PARAM_PREFIX "rcupdate."

#ifndef CONFIG_TINY_RCU
module_param(rcu_expedited, int, 0);
module_param(rcu_normal, int, 0);
static int rcu_normal_after_boot;
module_param(rcu_normal_after_boot, int, 0);
#endif /* #ifndef CONFIG_TINY_RCU */

#ifdef CONFIG_DEBUG_LOCK_ALLOC
/**
 * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
 * @ret:        Best guess answer if lockdep cannot be relied on
 *
 * Returns true if lockdep must be ignored, in which case *ret contains
 * the best guess described below.  Otherwise returns false, in which
 * case *ret tells the caller nothing and the caller should instead
 * consult lockdep.
 *
 * If CONFIG_DEBUG_LOCK_ALLOC is selected, set *ret to nonzero iff in an
 * RCU-sched read-side critical section.  In absence of
 * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
 * critical section unless it can prove otherwise.  Note that disabling
 * of preemption (including disabling irqs) counts as an RCU-sched
 * read-side critical section.  This is useful for debug checks in functions
 * that required that they be called within an RCU-sched read-side
 * critical section.
 *
 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
 * and while lockdep is disabled.
 *
 * Note that if the CPU is in the idle loop from an RCU point of view (ie:
 * that we are in the section between rcu_idle_enter() and rcu_idle_exit())
 * then rcu_read_lock_held() sets *ret to false even if the CPU did an
 * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
 * in such a section, considering these as in extended quiescent state,
 * so such a CPU is effectively never in an RCU read-side critical section
 * regardless of what RCU primitives it invokes.  This state of affairs is
 * required --- we need to keep an RCU-free window in idle where the CPU may
 * possibly enter into low power mode. This way we can notice an extended
 * quiescent state to other CPUs that started a grace period. Otherwise
 * we would delay any grace period as long as we run in the idle task.
 *
 * Similarly, we avoid claiming an RCU read lock held if the current
 * CPU is offline.
 */
static bool rcu_read_lock_held_common(bool *ret)
{
        if (!debug_lockdep_rcu_enabled()) {
                *ret = 1;
                return true;
        }
        if (!rcu_is_watching()) {
                *ret = 0;
                return true;
        }
        if (!rcu_lockdep_current_cpu_online()) {
                *ret = 0;
                return true;
        }
        return false;
}

int rcu_read_lock_sched_held(void)
{
        bool ret;

        if (rcu_read_lock_held_common(&ret))
                return ret;
        return lock_is_held(&rcu_sched_lock_map) || !preemptible();
}
EXPORT_SYMBOL(rcu_read_lock_sched_held);
#endif

#ifndef CONFIG_TINY_RCU

/*
 * Should expedited grace-period primitives always fall back to their
 * non-expedited counterparts?  Intended for use within RCU.  Note
 * that if the user specifies both rcu_expedited and rcu_normal, then
 * rcu_normal wins.  (Except during the time period during boot from
 * when the first task is spawned until the rcu_set_runtime_mode()
 * core_initcall() is invoked, at which point everything is expedited.)
 */
bool rcu_gp_is_normal(void)
{
        return READ_ONCE(rcu_normal) &&
               rcu_scheduler_active != RCU_SCHEDULER_INIT;
}
EXPORT_SYMBOL_GPL(rcu_gp_is_normal);

static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);

/*
 * Should normal grace-period primitives be expedited?  Intended for
 * use within RCU.  Note that this function takes the rcu_expedited
 * sysfs/boot variable and rcu_scheduler_active into account as well
 * as the rcu_expedite_gp() nesting.  So looping on rcu_unexpedite_gp()
 * until rcu_gp_is_expedited() returns false is a -really- bad idea.
 */
bool rcu_gp_is_expedited(void)
{
        return rcu_expedited || atomic_read(&rcu_expedited_nesting);
}
EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);

/**
 * rcu_expedite_gp - Expedite future RCU grace periods
 *
 * After a call to this function, future calls to synchronize_rcu() and
 * friends act as the corresponding synchronize_rcu_expedited() function
 * had instead been called.
 */
void rcu_expedite_gp(void)
{
        atomic_inc(&rcu_expedited_nesting);
}
EXPORT_SYMBOL_GPL(rcu_expedite_gp);

/**
 * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation
 *
 * Undo a prior call to rcu_expedite_gp().  If all prior calls to
 * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(),
 * and if the rcu_expedited sysfs/boot parameter is not set, then all
 * subsequent calls to synchronize_rcu() and friends will return to
 * their normal non-expedited behavior.
 */
void rcu_unexpedite_gp(void)
{
        atomic_dec(&rcu_expedited_nesting);
}
EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);

static bool rcu_boot_ended __read_mostly;

/*
 * Inform RCU of the end of the in-kernel boot sequence.
 */
void rcu_end_inkernel_boot(void)
{
        rcu_unexpedite_gp();
        if (rcu_normal_after_boot)
                WRITE_ONCE(rcu_normal, 1);
        rcu_boot_ended = 1;
}

/*
 * Let rcutorture know when it is OK to turn it up to eleven.
 */
bool rcu_inkernel_boot_has_ended(void)
{
        return rcu_boot_ended;
}
EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended);

#endif /* #ifndef CONFIG_TINY_RCU */

/*
 * Test each non-SRCU synchronous grace-period wait API.  This is
 * useful just after a change in mode for these primitives, and
 * during early boot.
 */
void rcu_test_sync_prims(void)
{
        if (!IS_ENABLED(CONFIG_PROVE_RCU))
                return;
        synchronize_rcu();
        synchronize_rcu_expedited();
}

#if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU)

/*
 * Switch to run-time mode once RCU has fully initialized.
 */
static int __init rcu_set_runtime_mode(void)
{
        rcu_test_sync_prims();
        rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
        kfree_rcu_scheduler_running();
        rcu_test_sync_prims();
        return 0;
}
core_initcall(rcu_set_runtime_mode);

#endif /* #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) */

#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key rcu_lock_key;
struct lockdep_map rcu_lock_map = {
        .name = "rcu_read_lock",
        .key = &rcu_lock_key,
        .wait_type_outer = LD_WAIT_FREE,
        .wait_type_inner = LD_WAIT_CONFIG, /* XXX PREEMPT_RCU ? */
};
EXPORT_SYMBOL_GPL(rcu_lock_map);

static struct lock_class_key rcu_bh_lock_key;
struct lockdep_map rcu_bh_lock_map = {
        .name = "rcu_read_lock_bh",
        .key = &rcu_bh_lock_key,
        .wait_type_outer = LD_WAIT_FREE,
        .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_LOCK also makes BH preemptible */
};
EXPORT_SYMBOL_GPL(rcu_bh_lock_map);

static struct lock_class_key rcu_sched_lock_key;
struct lockdep_map rcu_sched_lock_map = {
        .name = "rcu_read_lock_sched",
        .key = &rcu_sched_lock_key,
        .wait_type_outer = LD_WAIT_FREE,
        .wait_type_inner = LD_WAIT_SPIN,
};
EXPORT_SYMBOL_GPL(rcu_sched_lock_map);

static struct lock_class_key rcu_callback_key;
struct lockdep_map rcu_callback_map =
        STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key);
EXPORT_SYMBOL_GPL(rcu_callback_map);

int notrace debug_lockdep_rcu_enabled(void)
{
        return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks &&
               current->lockdep_recursion == 0;
}
EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
NOKPROBE_SYMBOL(debug_lockdep_rcu_enabled);

/**
 * rcu_read_lock_held() - might we be in RCU read-side critical section?
 *
 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
 * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
 * this assumes we are in an RCU read-side critical section unless it can
 * prove otherwise.  This is useful for debug checks in functions that
 * require that they be called within an RCU read-side critical section.
 *
 * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
 * and while lockdep is disabled.
 *
 * Note that rcu_read_lock() and the matching rcu_read_unlock() must
 * occur in the same context, for example, it is illegal to invoke
 * rcu_read_unlock() in process context if the matching rcu_read_lock()
 * was invoked from within an irq handler.
 *
 * Note that rcu_read_lock() is disallowed if the CPU is either idle or
 * offline from an RCU perspective, so check for those as well.
 */
int rcu_read_lock_held(void)
{
        bool ret;

        if (rcu_read_lock_held_common(&ret))
                return ret;
        return lock_is_held(&rcu_lock_map);
}
EXPORT_SYMBOL_GPL(rcu_read_lock_held);

/**
 * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
 *
 * Check for bottom half being disabled, which covers both the
 * CONFIG_PROVE_RCU and not cases.  Note that if someone uses
 * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
 * will show the situation.  This is useful for debug checks in functions
 * that require that they be called within an RCU read-side critical
 * section.
 *
 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
 *
 * Note that rcu_read_lock_bh() is disallowed if the CPU is either idle or
 * offline from an RCU perspective, so check for those as well.
 */
int rcu_read_lock_bh_held(void)
{
        bool ret;

        if (rcu_read_lock_held_common(&ret))
                return ret;
        return in_softirq() || irqs_disabled();
}
EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);

int rcu_read_lock_any_held(void)
{
        bool ret;

        if (rcu_read_lock_held_common(&ret))
                return ret;
        if (lock_is_held(&rcu_lock_map) ||
            lock_is_held(&rcu_bh_lock_map) ||
            lock_is_held(&rcu_sched_lock_map))
                return 1;
        return !preemptible();
}
EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);

#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */

/**
 * wakeme_after_rcu() - Callback function to awaken a task after grace period
 * @head: Pointer to rcu_head member within rcu_synchronize structure
 *
 * Awaken the corresponding task now that a grace period has elapsed.
 */
void wakeme_after_rcu(struct rcu_head *head)
{
        struct rcu_synchronize *rcu;

        rcu = container_of(head, struct rcu_synchronize, head);
        complete(&rcu->completion);
}
EXPORT_SYMBOL_GPL(wakeme_after_rcu);

void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
                   struct rcu_synchronize *rs_array)
{
        int i;
        int j;

        /* Initialize and register callbacks for each crcu_array element. */
        for (i = 0; i < n; i++) {
                if (checktiny &&
                    (crcu_array[i] == call_rcu)) {
                        might_sleep();
                        continue;
                }
                init_rcu_head_on_stack(&rs_array[i].head);
                init_completion(&rs_array[i].completion);
                for (j = 0; j < i; j++)
                        if (crcu_array[j] == crcu_array[i])
                                break;
                if (j == i)
                        (crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
        }

        /* Wait for all callbacks to be invoked. */
        for (i = 0; i < n; i++) {
                if (checktiny &&
                    (crcu_array[i] == call_rcu))
                        continue;
                for (j = 0; j < i; j++)
                        if (crcu_array[j] == crcu_array[i])
                                break;
                if (j == i)
                        wait_for_completion(&rs_array[i].completion);
                destroy_rcu_head_on_stack(&rs_array[i].head);
        }
}
EXPORT_SYMBOL_GPL(__wait_rcu_gp);

#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
void init_rcu_head(struct rcu_head *head)
{
        debug_object_init(head, &rcuhead_debug_descr);
}
EXPORT_SYMBOL_GPL(init_rcu_head);

void destroy_rcu_head(struct rcu_head *head)
{
        debug_object_free(head, &rcuhead_debug_descr);
}
EXPORT_SYMBOL_GPL(destroy_rcu_head);

static bool rcuhead_is_static_object(void *addr)
{
        return true;
}

/**
 * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
 * @head: pointer to rcu_head structure to be initialized
 *
 * This function informs debugobjects of a new rcu_head structure that
 * has been allocated as an auto variable on the stack.  This function
 * is not required for rcu_head structures that are statically defined or
 * that are dynamically allocated on the heap.  This function has no
 * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
 */
void init_rcu_head_on_stack(struct rcu_head *head)
{
        debug_object_init_on_stack(head, &rcuhead_debug_descr);
}
EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);

/**
 * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
 * @head: pointer to rcu_head structure to be initialized
 *
 * This function informs debugobjects that an on-stack rcu_head structure
 * is about to go out of scope.  As with init_rcu_head_on_stack(), this
 * function is not required for rcu_head structures that are statically
 * defined or that are dynamically allocated on the heap.  Also as with
 * init_rcu_head_on_stack(), this function has no effect for
 * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
 */
void destroy_rcu_head_on_stack(struct rcu_head *head)
{
        debug_object_free(head, &rcuhead_debug_descr);
}
EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);

struct debug_obj_descr rcuhead_debug_descr = {
        .name = "rcu_head",
        .is_static_object = rcuhead_is_static_object,
};
EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */

#if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE)
void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
                               unsigned long secs,
                               unsigned long c_old, unsigned long c)
{
        trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
}
EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
#else
#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
        do { } while (0)
#endif

#if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST)
/* Get rcutorture access to sched_setaffinity(). */
long rcutorture_sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
{
        int ret;

        ret = sched_setaffinity(pid, in_mask);
        WARN_ONCE(ret, "%s: sched_setaffinity() returned %d\n", __func__, ret);
        return ret;
}
EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity);
#endif

#ifdef CONFIG_RCU_STALL_COMMON
int rcu_cpu_stall_ftrace_dump __read_mostly;
module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings.
EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
module_param(rcu_cpu_stall_suppress, int, 0644);
int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
module_param(rcu_cpu_stall_timeout, int, 0644);
#endif /* #ifdef CONFIG_RCU_STALL_COMMON */

// Suppress boot-time RCU CPU stall warnings and rcutorture writer stall
// warnings.  Also used by rcutorture even if stall warnings are excluded.
int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls.
EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot);
module_param(rcu_cpu_stall_suppress_at_boot, int, 0444);

#ifdef CONFIG_TASKS_RCU

/*
 * Simple variant of RCU whose quiescent states are voluntary context
 * switch, cond_resched_rcu_qs(), user-space execution, and idle.
 * As such, grace periods can take one good long time.  There are no
 * read-side primitives similar to rcu_read_lock() and rcu_read_unlock()
 * because this implementation is intended to get the system into a safe
 * state for some of the manipulations involved in tracing and the like.
 * Finally, this implementation does not support high call_rcu_tasks()
 * rates from multiple CPUs.  If this is required, per-CPU callback lists
 * will be needed.
 */

/* Global list of callbacks and associated lock. */
static struct rcu_head *rcu_tasks_cbs_head;
static struct rcu_head **rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq);
static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);

/* Track exiting tasks in order to allow them to be waited for. */
DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu);

/* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
#define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
module_param(rcu_task_stall_timeout, int, 0644);

static struct task_struct *rcu_tasks_kthread_ptr;

/**
 * call_rcu_tasks() - Queue an RCU for invocation task-based grace period
 * @rhp: structure to be used for queueing the RCU updates.
 * @func: actual callback function to be invoked after the grace period
 *
 * The callback function will be invoked some time after a full grace
 * period elapses, in other words after all currently executing RCU
 * read-side critical sections have completed. call_rcu_tasks() assumes
 * that the read-side critical sections end at a voluntary context
 * switch (not a preemption!), cond_resched_rcu_qs(), entry into idle,
 * or transition to usermode execution.  As such, there are no read-side
 * primitives analogous to rcu_read_lock() and rcu_read_unlock() because
 * this primitive is intended to determine that all tasks have passed
 * through a safe state, not so much for data-strcuture synchronization.
 *
 * See the description of call_rcu() for more detailed information on
 * memory ordering guarantees.
 */
void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func)
{
        unsigned long flags;
        bool needwake;

        rhp->next = NULL;
        rhp->func = func;
        raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
        needwake = !rcu_tasks_cbs_head;
        WRITE_ONCE(*rcu_tasks_cbs_tail, rhp);
        rcu_tasks_cbs_tail = &rhp->next;
        raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
        /* We can't create the thread unless interrupts are enabled. */
        if (needwake && READ_ONCE(rcu_tasks_kthread_ptr))
                wake_up(&rcu_tasks_cbs_wq);
}
EXPORT_SYMBOL_GPL(call_rcu_tasks);

/**
 * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed.
 *
 * Control will return to the caller some time after a full rcu-tasks
 * grace period has elapsed, in other words after all currently
 * executing rcu-tasks read-side critical sections have elapsed.  These
 * read-side critical sections are delimited by calls to schedule(),
 * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls
 * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched().
 *
 * This is a very specialized primitive, intended only for a few uses in
 * tracing and other situations requiring manipulation of function
 * preambles and profiling hooks.  The synchronize_rcu_tasks() function
 * is not (yet) intended for heavy use from multiple CPUs.
 *
 * Note that this guarantee implies further memory-ordering guarantees.
 * On systems with more than one CPU, when synchronize_rcu_tasks() returns,
 * each CPU is guaranteed to have executed a full memory barrier since the
 * end of its last RCU-tasks read-side critical section whose beginning
 * preceded the call to synchronize_rcu_tasks().  In addition, each CPU
 * having an RCU-tasks read-side critical section that extends beyond
 * the return from synchronize_rcu_tasks() is guaranteed to have executed
 * a full memory barrier after the beginning of synchronize_rcu_tasks()
 * and before the beginning of that RCU-tasks read-side critical section.
 * Note that these guarantees include CPUs that are offline, idle, or
 * executing in user mode, as well as CPUs that are executing in the kernel.
 *
 * Furthermore, if CPU A invoked synchronize_rcu_tasks(), which returned
 * to its caller on CPU B, then both CPU A and CPU B are guaranteed
 * to have executed a full memory barrier during the execution of
 * synchronize_rcu_tasks() -- even if CPU A and CPU B are the same CPU
 * (but again only if the system has more than one CPU).
 */
void synchronize_rcu_tasks(void)
{
        /* Complain if the scheduler has not started.  */
        RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
                         "synchronize_rcu_tasks called too soon");

        /* Wait for the grace period. */
        wait_rcu_gp(call_rcu_tasks);
}
EXPORT_SYMBOL_GPL(synchronize_rcu_tasks);

/**
 * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks.
 *
 * Although the current implementation is guaranteed to wait, it is not
 * obligated to, for example, if there are no pending callbacks.
 */
void rcu_barrier_tasks(void)
{
        /* There is only one callback queue, so this is easy.  ;-) */
        synchronize_rcu_tasks();
}
EXPORT_SYMBOL_GPL(rcu_barrier_tasks);

/* See if tasks are still holding out, complain if so. */
static void check_holdout_task(struct task_struct *t,
                               bool needreport, bool *firstreport)
{
        int cpu;

        if (!READ_ONCE(t->rcu_tasks_holdout) ||
            t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) ||
            !READ_ONCE(t->on_rq) ||
            (IS_ENABLED(CONFIG_NO_HZ_FULL) &&
             !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) {
                WRITE_ONCE(t->rcu_tasks_holdout, false);
                list_del_init(&t->rcu_tasks_holdout_list);
                put_task_struct(t);
                return;
        }
        rcu_request_urgent_qs_task(t);
        if (!needreport)
                return;
        if (*firstreport) {
                pr_err("INFO: rcu_tasks detected stalls on tasks:\n");
                *firstreport = false;
        }
        cpu = task_cpu(t);
        pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n",
                 t, ".I"[is_idle_task(t)],
                 "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)],
                 t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout,
                 t->rcu_tasks_idle_cpu, cpu);
        sched_show_task(t);
}

/* RCU-tasks kthread that detects grace periods and invokes callbacks. */
static int __noreturn rcu_tasks_kthread(void *arg)
{
        unsigned long flags;
        struct task_struct *g, *t;
        unsigned long lastreport;
        struct rcu_head *list;
        struct rcu_head *next;
        LIST_HEAD(rcu_tasks_holdouts);
        int fract;

        /* Run on housekeeping CPUs by default.  Sysadm can move if desired. */
        housekeeping_affine(current, HK_FLAG_RCU);

        /*
         * Each pass through the following loop makes one check for
         * newly arrived callbacks, and, if there are some, waits for
         * one RCU-tasks grace period and then invokes the callbacks.
         * This loop is terminated by the system going down.  ;-)
         */
        for (;;) {

                /* Pick up any new callbacks. */
                raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
                list = rcu_tasks_cbs_head;
                rcu_tasks_cbs_head = NULL;
                rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
                raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);

                /* If there were none, wait a bit and start over. */
                if (!list) {
                        wait_event_interruptible(rcu_tasks_cbs_wq,
                                                 READ_ONCE(rcu_tasks_cbs_head));
                        if (!rcu_tasks_cbs_head) {
                                WARN_ON(signal_pending(current));
                                schedule_timeout_interruptible(HZ/10);
                        }
                        continue;
                }

                /*
                 * Wait for all pre-existing t->on_rq and t->nvcsw
                 * transitions to complete.  Invoking synchronize_rcu()
                 * suffices because all these transitions occur with
                 * interrupts disabled.  Without this synchronize_rcu(),
                 * a read-side critical section that started before the
                 * grace period might be incorrectly seen as having started
                 * after the grace period.
                 *
                 * This synchronize_rcu() also dispenses with the
                 * need for a memory barrier on the first store to
                 * ->rcu_tasks_holdout, as it forces the store to happen
                 * after the beginning of the grace period.
                 */
                synchronize_rcu();

                /*
                 * There were callbacks, so we need to wait for an
                 * RCU-tasks grace period.  Start off by scanning
                 * the task list for tasks that are not already
                 * voluntarily blocked.  Mark these tasks and make
                 * a list of them in rcu_tasks_holdouts.
                 */
                rcu_read_lock();
                for_each_process_thread(g, t) {
                        if (t != current && READ_ONCE(t->on_rq) &&
                            !is_idle_task(t)) {
                                get_task_struct(t);
                                t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw);
                                WRITE_ONCE(t->rcu_tasks_holdout, true);
                                list_add(&t->rcu_tasks_holdout_list,
                                         &rcu_tasks_holdouts);
                        }
                }
                rcu_read_unlock();

                /*
                 * Wait for tasks that are in the process of exiting.
                 * This does only part of the job, ensuring that all
                 * tasks that were previously exiting reach the point
                 * where they have disabled preemption, allowing the
                 * later synchronize_rcu() to finish the job.
                 */
                synchronize_srcu(&tasks_rcu_exit_srcu);

                /*
                 * Each pass through the following loop scans the list
                 * of holdout tasks, removing any that are no longer
                 * holdouts.  When the list is empty, we are done.
                 */
                lastreport = jiffies;

                /* Start off with HZ/10 wait and slowly back off to 1 HZ wait*/
                fract = 10;

                for (;;) {
                        bool firstreport;
                        bool needreport;
                        int rtst;
                        struct task_struct *t1;

                        if (list_empty(&rcu_tasks_holdouts))
                                break;

                        /* Slowly back off waiting for holdouts */
                        schedule_timeout_interruptible(HZ/fract);

                        if (fract > 1)
                                fract--;

                        rtst = READ_ONCE(rcu_task_stall_timeout);
                        needreport = rtst > 0 &&
                                     time_after(jiffies, lastreport + rtst);
                        if (needreport)
                                lastreport = jiffies;
                        firstreport = true;
                        WARN_ON(signal_pending(current));
                        list_for_each_entry_safe(t, t1, &rcu_tasks_holdouts,
                                                rcu_tasks_holdout_list) {
                                check_holdout_task(t, needreport, &firstreport);
                                cond_resched();
                        }
                }

                /*
                 * Because ->on_rq and ->nvcsw are not guaranteed
                 * to have a full memory barriers prior to them in the
                 * schedule() path, memory reordering on other CPUs could
                 * cause their RCU-tasks read-side critical sections to
                 * extend past the end of the grace period.  However,
                 * because these ->nvcsw updates are carried out with
                 * interrupts disabled, we can use synchronize_rcu()
                 * to force the needed ordering on all such CPUs.
                 *
                 * This synchronize_rcu() also confines all
                 * ->rcu_tasks_holdout accesses to be within the grace
                 * period, avoiding the need for memory barriers for
                 * ->rcu_tasks_holdout accesses.
                 *
                 * In addition, this synchronize_rcu() waits for exiting
                 * tasks to complete their final preempt_disable() region
                 * of execution, cleaning up after the synchronize_srcu()
                 * above.
                 */
                synchronize_rcu();

                /* Invoke the callbacks. */
                while (list) {
                        next = list->next;
                        local_bh_disable();
                        list->func(list);
                        local_bh_enable();
                        list = next;
                        cond_resched();
                }
                /* Paranoid sleep to keep this from entering a tight loop */
                schedule_timeout_uninterruptible(HZ/10);
        }
}

/* Spawn rcu_tasks_kthread() at core_initcall() time. */
static int __init rcu_spawn_tasks_kthread(void)
{
        struct task_struct *t;

        t = kthread_run(rcu_tasks_kthread, NULL, "rcu_tasks_kthread");
        if (WARN_ONCE(IS_ERR(t), "%s: Could not start Tasks-RCU grace-period kthread, OOM is now expected behavior\n", __func__))
                return 0;
        smp_mb(); /* Ensure others see full kthread. */
        WRITE_ONCE(rcu_tasks_kthread_ptr, t);
        return 0;
}
core_initcall(rcu_spawn_tasks_kthread);

/* Do the srcu_read_lock() for the above synchronize_srcu().  */
void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
{
        preempt_disable();
        current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
        preempt_enable();
}

/* Do the srcu_read_unlock() for the above synchronize_srcu().  */
void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
{
        preempt_disable();
        __srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx);
        preempt_enable();
}

#endif /* #ifdef CONFIG_TASKS_RCU */

#ifndef CONFIG_TINY_RCU

/*
 * Print any non-default Tasks RCU settings.
 */
static void __init rcu_tasks_bootup_oddness(void)
{
#ifdef CONFIG_TASKS_RCU
        if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT)
                pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout);
        else
                pr_info("\tTasks RCU enabled.\n");
#endif /* #ifdef CONFIG_TASKS_RCU */
}

#endif /* #ifndef CONFIG_TINY_RCU */

#ifdef CONFIG_PROVE_RCU

/*
 * Early boot self test parameters.
 */
static bool rcu_self_test;
module_param(rcu_self_test, bool, 0444);

static int rcu_self_test_counter;

static void test_callback(struct rcu_head *r)
{
        rcu_self_test_counter++;
        pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
}

DEFINE_STATIC_SRCU(early_srcu);

struct early_boot_kfree_rcu {
        struct rcu_head rh;
};

static void early_boot_test_call_rcu(void)
{
        static struct rcu_head head;
        static struct rcu_head shead;
        struct early_boot_kfree_rcu *rhp;

        call_rcu(&head, test_callback);
        if (IS_ENABLED(CONFIG_SRCU))
                call_srcu(&early_srcu, &shead, test_callback);
        rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
        if (!WARN_ON_ONCE(!rhp))
                kfree_rcu(rhp, rh);
}

void rcu_early_boot_tests(void)
{
        pr_info("Running RCU self tests\n");

        if (rcu_self_test)
                early_boot_test_call_rcu();
        rcu_test_sync_prims();
}

static int rcu_verify_early_boot_tests(void)
{
        int ret = 0;
        int early_boot_test_counter = 0;

        if (rcu_self_test) {
                early_boot_test_counter++;
                rcu_barrier();
                if (IS_ENABLED(CONFIG_SRCU)) {
                        early_boot_test_counter++;
                        srcu_barrier(&early_srcu);
                }
        }
        if (rcu_self_test_counter != early_boot_test_counter) {
                WARN_ON(1);
                ret = -1;
        }

        return ret;
}
late_initcall(rcu_verify_early_boot_tests);
#else
void rcu_early_boot_tests(void) {}
#endif /* CONFIG_PROVE_RCU */

#ifndef CONFIG_TINY_RCU

/*
 * Print any significant non-default boot-time settings.
 */
void __init rcupdate_announce_bootup_oddness(void)
{
        if (rcu_normal)
                pr_info("\tNo expedited grace period (rcu_normal).\n");
        else if (rcu_normal_after_boot)
                pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n");
        else if (rcu_expedited)
                pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
        if (rcu_cpu_stall_suppress)
                pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
        if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
                pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
        rcu_tasks_bootup_oddness();
}

#endif /* #ifndef CONFIG_TINY_RCU */