Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
[linux-2.6-microblaze.git] / include / scsi / scsi_device.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blkdev.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11
12 struct device;
13 struct request_queue;
14 struct scsi_cmnd;
15 struct scsi_lun;
16 struct scsi_sense_hdr;
17
18 struct scsi_mode_data {
19         __u32   length;
20         __u16   block_descriptor_length;
21         __u8    medium_type;
22         __u8    device_specific;
23         __u8    header_length;
24         __u8    longlba:1;
25 };
26
27 /*
28  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
29  * (for the ascii descriptions) and the state model enforcer:
30  * scsi_lib:scsi_device_set_state().
31  */
32 enum scsi_device_state {
33         SDEV_CREATED = 1,       /* device created but not added to sysfs
34                                  * Only internal commands allowed (for inq) */
35         SDEV_RUNNING,           /* device properly configured
36                                  * All commands allowed */
37         SDEV_CANCEL,            /* beginning to delete device
38                                  * Only error handler commands allowed */
39         SDEV_DEL,               /* device deleted 
40                                  * no commands allowed */
41         SDEV_QUIESCE,           /* Device quiescent.  No block commands
42                                  * will be accepted, only specials (which
43                                  * originate in the mid-layer) */
44         SDEV_OFFLINE,           /* Device offlined (by error handling or
45                                  * user request */
46         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
47         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
48                                  * scsi commands from user or midlayer
49                                  * should be issued to the scsi
50                                  * lld. */
51         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
52 };
53
54 enum scsi_scan_mode {
55         SCSI_SCAN_INITIAL = 0,
56         SCSI_SCAN_RESCAN,
57         SCSI_SCAN_MANUAL,
58 };
59
60 enum scsi_device_event {
61         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
62         SDEV_EVT_INQUIRY_CHANGE_REPORTED,               /* 3F 03  UA reported */
63         SDEV_EVT_CAPACITY_CHANGE_REPORTED,              /* 2A 09  UA reported */
64         SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,       /* 38 07  UA reported */
65         SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,        /* 2A 01  UA reported */
66         SDEV_EVT_LUN_CHANGE_REPORTED,                   /* 3F 0E  UA reported */
67         SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,            /* 2A 06  UA reported */
68         SDEV_EVT_POWER_ON_RESET_OCCURRED,               /* 29 00  UA reported */
69
70         SDEV_EVT_FIRST          = SDEV_EVT_MEDIA_CHANGE,
71         SDEV_EVT_LAST           = SDEV_EVT_POWER_ON_RESET_OCCURRED,
72
73         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
74 };
75
76 struct scsi_event {
77         enum scsi_device_event  evt_type;
78         struct list_head        node;
79
80         /* put union of data structures, for non-simple event types,
81          * here
82          */
83 };
84
85 /**
86  * struct scsi_vpd - SCSI Vital Product Data
87  * @rcu: For kfree_rcu().
88  * @len: Length in bytes of @data.
89  * @data: VPD data as defined in various T10 SCSI standard documents.
90  */
91 struct scsi_vpd {
92         struct rcu_head rcu;
93         int             len;
94         unsigned char   data[];
95 };
96
97 struct scsi_device {
98         struct Scsi_Host *host;
99         struct request_queue *request_queue;
100
101         /* the next two are protected by the host->host_lock */
102         struct list_head    siblings;   /* list of all devices on this host */
103         struct list_head    same_target_siblings; /* just the devices sharing same target id */
104
105         atomic_t device_busy;           /* commands actually active on LLDD */
106         atomic_t device_blocked;        /* Device returned QUEUE_FULL. */
107
108         spinlock_t list_lock;
109         struct list_head cmd_list;      /* queue of in use SCSI Command structures */
110         struct list_head starved_entry;
111         unsigned short queue_depth;     /* How deep of a queue we want */
112         unsigned short max_queue_depth; /* max queue depth */
113         unsigned short last_queue_full_depth; /* These two are used by */
114         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
115         unsigned long last_queue_full_time;     /* last queue full time */
116         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
117 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
118
119         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
120
121         unsigned int id, channel;
122         u64 lun;
123         unsigned int manufacturer;      /* Manufacturer of device, for using 
124                                          * vendor-specific cmd's */
125         unsigned sector_size;   /* size in bytes */
126
127         void *hostdata;         /* available to low-level driver */
128         unsigned char type;
129         char scsi_level;
130         char inq_periph_qual;   /* PQ from INQUIRY data */      
131         struct mutex inquiry_mutex;
132         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
133         unsigned char * inquiry;        /* INQUIRY response data */
134         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
135         const char * model;             /* ... after scan; point to static string */
136         const char * rev;               /* ... "nullnullnullnull" before scan */
137
138 #define SCSI_VPD_PG_LEN                255
139         struct scsi_vpd __rcu *vpd_pg83;
140         struct scsi_vpd __rcu *vpd_pg80;
141         unsigned char current_tag;      /* current tag */
142         struct scsi_target      *sdev_target;   /* used only for single_lun */
143
144         unsigned int    sdev_bflags; /* black/white flags as also found in
145                                  * scsi_devinfo.[hc]. For now used only to
146                                  * pass settings from slave_alloc to scsi
147                                  * core. */
148         unsigned int eh_timeout; /* Error handling timeout */
149         unsigned removable:1;
150         unsigned changed:1;     /* Data invalid due to media change */
151         unsigned busy:1;        /* Used to prevent races */
152         unsigned lockable:1;    /* Able to prevent media removal */
153         unsigned locked:1;      /* Media removal disabled */
154         unsigned borken:1;      /* Tell the Seagate driver to be 
155                                  * painfully slow on this device */
156         unsigned disconnect:1;  /* can disconnect */
157         unsigned soft_reset:1;  /* Uses soft reset option */
158         unsigned sdtr:1;        /* Device supports SDTR messages */
159         unsigned wdtr:1;        /* Device supports WDTR messages */
160         unsigned ppr:1;         /* Device supports PPR messages */
161         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
162         unsigned simple_tags:1; /* simple queue tag messages are enabled */
163         unsigned was_reset:1;   /* There was a bus reset on the bus for 
164                                  * this device */
165         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
166                                      * because we did a bus reset. */
167         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
168         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
169         unsigned no_report_opcodes:1;   /* no REPORT SUPPORTED OPERATION CODES */
170         unsigned no_write_same:1;       /* no WRITE SAME command */
171         unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
172         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
173         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
174         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
175         unsigned try_vpd_pages:1;       /* attempt to read VPD pages */
176         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
177         unsigned no_start_on_add:1;     /* do not issue start on add */
178         unsigned allow_restart:1; /* issue START_UNIT in error handler */
179         unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
180         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
181         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
182         unsigned select_no_atn:1;
183         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
184         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
185         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
186         unsigned last_sector_bug:1;     /* do not use multisector accesses on
187                                            SD_LAST_BUGGY_SECTORS */
188         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
189         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
190         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
191         unsigned security_supported:1;  /* Supports Security Protocols */
192         unsigned is_visible:1;  /* is the device visible in sysfs */
193         unsigned wce_default_on:1;      /* Cache is ON by default */
194         unsigned no_dif:1;      /* T10 PI (DIF) should be disabled */
195         unsigned broken_fua:1;          /* Don't set FUA bit */
196         unsigned lun_in_cdb:1;          /* Store LUN bits in CDB[1] */
197         unsigned unmap_limit_for_ws:1;  /* Use the UNMAP limit for WRITE SAME */
198
199         atomic_t disk_events_disable_depth; /* disable depth for disk events */
200
201         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
202         DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
203         struct list_head event_list;    /* asserted events */
204         struct work_struct event_work;
205
206         unsigned int max_device_blocked; /* what device_blocked counts down from  */
207 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
208
209         atomic_t iorequest_cnt;
210         atomic_t iodone_cnt;
211         atomic_t ioerr_cnt;
212
213         struct device           sdev_gendev,
214                                 sdev_dev;
215
216         struct execute_work     ew; /* used to get process context on put */
217         struct work_struct      requeue_work;
218
219         struct scsi_device_handler *handler;
220         void                    *handler_data;
221
222         unsigned char           access_state;
223         struct mutex            state_mutex;
224         enum scsi_device_state sdev_state;
225         struct task_struct      *quiesced_by;
226         unsigned long           sdev_data[0];
227 } __attribute__((aligned(sizeof(unsigned long))));
228
229 #define to_scsi_device(d)       \
230         container_of(d, struct scsi_device, sdev_gendev)
231 #define class_to_sdev(d)        \
232         container_of(d, struct scsi_device, sdev_dev)
233 #define transport_class_to_sdev(class_dev) \
234         to_scsi_device(class_dev->parent)
235
236 #define sdev_dbg(sdev, fmt, a...) \
237         dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
238
239 /*
240  * like scmd_printk, but the device name is passed in
241  * as a string pointer
242  */
243 __printf(4, 5) void
244 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
245                 const char *, ...);
246
247 #define sdev_printk(l, sdev, fmt, a...)                         \
248         sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
249
250 __printf(3, 4) void
251 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
252
253 #define scmd_dbg(scmd, fmt, a...)                                          \
254         do {                                                               \
255                 if ((scmd)->request->rq_disk)                              \
256                         sdev_dbg((scmd)->device, "[%s] " fmt,              \
257                                  (scmd)->request->rq_disk->disk_name, ##a);\
258                 else                                                       \
259                         sdev_dbg((scmd)->device, fmt, ##a);                \
260         } while (0)
261
262 enum scsi_target_state {
263         STARGET_CREATED = 1,
264         STARGET_RUNNING,
265         STARGET_REMOVE,
266         STARGET_CREATED_REMOVE,
267         STARGET_DEL,
268 };
269
270 /*
271  * scsi_target: representation of a scsi target, for now, this is only
272  * used for single_lun devices. If no one has active IO to the target,
273  * starget_sdev_user is NULL, else it points to the active sdev.
274  */
275 struct scsi_target {
276         struct scsi_device      *starget_sdev_user;
277         struct list_head        siblings;
278         struct list_head        devices;
279         struct device           dev;
280         struct kref             reap_ref; /* last put renders target invisible */
281         unsigned int            channel;
282         unsigned int            id; /* target id ... replace
283                                      * scsi_device.id eventually */
284         unsigned int            create:1; /* signal that it needs to be added */
285         unsigned int            single_lun:1;   /* Indicates we should only
286                                                  * allow I/O to one of the luns
287                                                  * for the device at a time. */
288         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
289                                                  * means no lun present. */
290         unsigned int            no_report_luns:1;       /* Don't use
291                                                  * REPORT LUNS for scanning. */
292         unsigned int            expecting_lun_change:1; /* A device has reported
293                                                  * a 3F/0E UA, other devices on
294                                                  * the same target will also. */
295         /* commands actually active on LLD. */
296         atomic_t                target_busy;
297         atomic_t                target_blocked;
298
299         /*
300          * LLDs should set this in the slave_alloc host template callout.
301          * If set to zero then there is not limit.
302          */
303         unsigned int            can_queue;
304         unsigned int            max_target_blocked;
305 #define SCSI_DEFAULT_TARGET_BLOCKED     3
306
307         char                    scsi_level;
308         enum scsi_target_state  state;
309         void                    *hostdata; /* available to low-level driver */
310         unsigned long           starget_data[0]; /* for the transport */
311         /* starget_data must be the last element!!!! */
312 } __attribute__((aligned(sizeof(unsigned long))));
313
314 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
315 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
316 {
317         return to_scsi_target(sdev->sdev_gendev.parent);
318 }
319 #define transport_class_to_starget(class_dev) \
320         to_scsi_target(class_dev->parent)
321
322 #define starget_printk(prefix, starget, fmt, a...)      \
323         dev_printk(prefix, &(starget)->dev, fmt, ##a)
324
325 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
326                 uint, uint, u64, void *hostdata);
327 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
328                            uint target, u64 lun);
329 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
330 extern void scsi_remove_device(struct scsi_device *);
331 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
332 void scsi_attach_vpd(struct scsi_device *sdev);
333
334 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
335 extern int __must_check scsi_device_get(struct scsi_device *);
336 extern void scsi_device_put(struct scsi_device *);
337 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
338                                               uint, uint, u64);
339 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
340                                                 uint, uint, u64);
341 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
342                                                         u64);
343 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
344                                                           u64);
345 extern void starget_for_each_device(struct scsi_target *, void *,
346                      void (*fn)(struct scsi_device *, void *));
347 extern void __starget_for_each_device(struct scsi_target *, void *,
348                                       void (*fn)(struct scsi_device *,
349                                                  void *));
350
351 /* only exposed to implement shost_for_each_device */
352 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
353                                                   struct scsi_device *);
354
355 /**
356  * shost_for_each_device - iterate over all devices of a host
357  * @sdev: the &struct scsi_device to use as a cursor
358  * @shost: the &struct scsi_host to iterate over
359  *
360  * Iterator that returns each device attached to @shost.  This loop
361  * takes a reference on each device and releases it at the end.  If
362  * you break out of the loop, you must call scsi_device_put(sdev).
363  */
364 #define shost_for_each_device(sdev, shost) \
365         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
366              (sdev); \
367              (sdev) = __scsi_iterate_devices((shost), (sdev)))
368
369 /**
370  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
371  * @sdev: the &struct scsi_device to use as a cursor
372  * @shost: the &struct scsi_host to iterate over
373  *
374  * Iterator that returns each device attached to @shost.  It does _not_
375  * take a reference on the scsi_device, so the whole loop must be
376  * protected by shost->host_lock.
377  *
378  * Note: The only reason to use this is because you need to access the
379  * device list in interrupt context.  Otherwise you really want to use
380  * shost_for_each_device instead.
381  */
382 #define __shost_for_each_device(sdev, shost) \
383         list_for_each_entry((sdev), &((shost)->__devices), siblings)
384
385 extern int scsi_change_queue_depth(struct scsi_device *, int);
386 extern int scsi_track_queue_full(struct scsi_device *, int);
387
388 extern int scsi_set_medium_removal(struct scsi_device *, char);
389
390 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
391                            unsigned char *buffer, int len, int timeout,
392                            int retries, struct scsi_mode_data *data,
393                            struct scsi_sense_hdr *);
394 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
395                             int modepage, unsigned char *buffer, int len,
396                             int timeout, int retries,
397                             struct scsi_mode_data *data,
398                             struct scsi_sense_hdr *);
399 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
400                                 int retries, struct scsi_sense_hdr *sshdr);
401 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
402                              int buf_len);
403 extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
404                               unsigned int len, unsigned char opcode);
405 extern int scsi_device_set_state(struct scsi_device *sdev,
406                                  enum scsi_device_state state);
407 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
408                                           gfp_t gfpflags);
409 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
410 extern void sdev_evt_send_simple(struct scsi_device *sdev,
411                           enum scsi_device_event evt_type, gfp_t gfpflags);
412 extern int scsi_device_quiesce(struct scsi_device *sdev);
413 extern void scsi_device_resume(struct scsi_device *sdev);
414 extern void scsi_target_quiesce(struct scsi_target *);
415 extern void scsi_target_resume(struct scsi_target *);
416 extern void scsi_scan_target(struct device *parent, unsigned int channel,
417                              unsigned int id, u64 lun,
418                              enum scsi_scan_mode rescan);
419 extern void scsi_target_reap(struct scsi_target *);
420 extern void scsi_target_block(struct device *);
421 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
422 extern void scsi_remove_target(struct device *);
423 extern const char *scsi_device_state_name(enum scsi_device_state);
424 extern int scsi_is_sdev_device(const struct device *);
425 extern int scsi_is_target_device(const struct device *);
426 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
427 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
428                         int data_direction, void *buffer, unsigned bufflen,
429                         unsigned char *sense, struct scsi_sense_hdr *sshdr,
430                         int timeout, int retries, u64 flags,
431                         req_flags_t rq_flags, int *resid);
432 static inline int scsi_execute_req(struct scsi_device *sdev,
433         const unsigned char *cmd, int data_direction, void *buffer,
434         unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
435         int retries, int *resid)
436 {
437         return scsi_execute(sdev, cmd, data_direction, buffer,
438                 bufflen, NULL, sshdr, timeout, retries,  0, 0, resid);
439 }
440 extern void sdev_disable_disk_events(struct scsi_device *sdev);
441 extern void sdev_enable_disk_events(struct scsi_device *sdev);
442 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
443 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
444
445 #ifdef CONFIG_PM
446 extern int scsi_autopm_get_device(struct scsi_device *);
447 extern void scsi_autopm_put_device(struct scsi_device *);
448 #else
449 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
450 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
451 #endif /* CONFIG_PM */
452
453 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
454 {
455         return device_reprobe(&sdev->sdev_gendev);
456 }
457
458 static inline unsigned int sdev_channel(struct scsi_device *sdev)
459 {
460         return sdev->channel;
461 }
462
463 static inline unsigned int sdev_id(struct scsi_device *sdev)
464 {
465         return sdev->id;
466 }
467
468 #define scmd_id(scmd) sdev_id((scmd)->device)
469 #define scmd_channel(scmd) sdev_channel((scmd)->device)
470
471 /*
472  * checks for positions of the SCSI state machine
473  */
474 static inline int scsi_device_online(struct scsi_device *sdev)
475 {
476         return (sdev->sdev_state != SDEV_OFFLINE &&
477                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
478                 sdev->sdev_state != SDEV_DEL);
479 }
480 static inline int scsi_device_blocked(struct scsi_device *sdev)
481 {
482         return sdev->sdev_state == SDEV_BLOCK ||
483                 sdev->sdev_state == SDEV_CREATED_BLOCK;
484 }
485 static inline int scsi_device_created(struct scsi_device *sdev)
486 {
487         return sdev->sdev_state == SDEV_CREATED ||
488                 sdev->sdev_state == SDEV_CREATED_BLOCK;
489 }
490
491 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
492 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
493                                         enum scsi_device_state new_state);
494
495 /* accessor functions for the SCSI parameters */
496 static inline int scsi_device_sync(struct scsi_device *sdev)
497 {
498         return sdev->sdtr;
499 }
500 static inline int scsi_device_wide(struct scsi_device *sdev)
501 {
502         return sdev->wdtr;
503 }
504 static inline int scsi_device_dt(struct scsi_device *sdev)
505 {
506         return sdev->ppr;
507 }
508 static inline int scsi_device_dt_only(struct scsi_device *sdev)
509 {
510         if (sdev->inquiry_len < 57)
511                 return 0;
512         return (sdev->inquiry[56] & 0x0c) == 0x04;
513 }
514 static inline int scsi_device_ius(struct scsi_device *sdev)
515 {
516         if (sdev->inquiry_len < 57)
517                 return 0;
518         return sdev->inquiry[56] & 0x01;
519 }
520 static inline int scsi_device_qas(struct scsi_device *sdev)
521 {
522         if (sdev->inquiry_len < 57)
523                 return 0;
524         return sdev->inquiry[56] & 0x02;
525 }
526 static inline int scsi_device_enclosure(struct scsi_device *sdev)
527 {
528         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
529 }
530
531 static inline int scsi_device_protection(struct scsi_device *sdev)
532 {
533         if (sdev->no_dif)
534                 return 0;
535
536         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
537 }
538
539 static inline int scsi_device_tpgs(struct scsi_device *sdev)
540 {
541         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
542 }
543
544 /**
545  * scsi_device_supports_vpd - test if a device supports VPD pages
546  * @sdev: the &struct scsi_device to test
547  *
548  * If the 'try_vpd_pages' flag is set it takes precedence.
549  * Otherwise we will assume VPD pages are supported if the
550  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
551  */
552 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
553 {
554         /* Attempt VPD inquiry if the device blacklist explicitly calls
555          * for it.
556          */
557         if (sdev->try_vpd_pages)
558                 return 1;
559         /*
560          * Although VPD inquiries can go to SCSI-2 type devices,
561          * some USB ones crash on receiving them, and the pages
562          * we currently ask for are mandatory for SPC-2 and beyond
563          */
564         if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
565                 return 1;
566         return 0;
567 }
568
569 #define MODULE_ALIAS_SCSI_DEVICE(type) \
570         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
571 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
572
573 #endif /* _SCSI_SCSI_DEVICE_H */