1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright 2015-2017 Google, Inc
6 #ifndef __LINUX_USB_PD_VDO_H
7 #define __LINUX_USB_PD_VDO_H
12 * VDO : Vendor Defined Message Object
13 * VDM object is minimum of VDM header + 6 additional data objects.
16 #define VDO_MAX_OBJECTS 6
17 #define VDO_MAX_SIZE (VDO_MAX_OBJECTS + 1)
23 * <15> :: VDM type ( 1b == structured, 0b == unstructured )
24 * <14:13> :: Structured VDM version
26 * <10:8> :: object position (1-7 valid ... used for enter/exit mode only)
27 * <7:6> :: command type (SVDM only?)
28 * <5> :: reserved (SVDM), command type (UVDM)
31 #define VDO(vid, type, ver, custom) \
37 #define VDO_SVDM_TYPE (1 << 15)
38 #define VDO_SVDM_VERS(x) ((x) << 13)
39 #define VDO_OPOS(x) ((x) << 8)
40 #define VDO_CMDT(x) ((x) << 6)
41 #define VDO_SVDM_VERS_MASK VDO_SVDM_VERS(0x3)
42 #define VDO_OPOS_MASK VDO_OPOS(0x7)
43 #define VDO_CMDT_MASK VDO_CMDT(0x3)
46 #define CMDT_RSP_ACK 1
47 #define CMDT_RSP_NAK 2
48 #define CMDT_RSP_BUSY 3
50 /* reserved for SVDM ... for Google UVDM */
51 #define VDO_SRC_INITIATOR (0 << 5)
52 #define VDO_SRC_RESPONDER (1 << 5)
54 #define CMD_DISCOVER_IDENT 1
55 #define CMD_DISCOVER_SVID 2
56 #define CMD_DISCOVER_MODES 3
57 #define CMD_ENTER_MODE 4
58 #define CMD_EXIT_MODE 5
59 #define CMD_ATTENTION 6
61 #define VDO_CMD_VENDOR(x) (((0x10 + (x)) & 0x1f))
63 /* ChromeOS specific commands */
64 #define VDO_CMD_VERSION VDO_CMD_VENDOR(0)
65 #define VDO_CMD_SEND_INFO VDO_CMD_VENDOR(1)
66 #define VDO_CMD_READ_INFO VDO_CMD_VENDOR(2)
67 #define VDO_CMD_REBOOT VDO_CMD_VENDOR(5)
68 #define VDO_CMD_FLASH_ERASE VDO_CMD_VENDOR(6)
69 #define VDO_CMD_FLASH_WRITE VDO_CMD_VENDOR(7)
70 #define VDO_CMD_ERASE_SIG VDO_CMD_VENDOR(8)
71 #define VDO_CMD_PING_ENABLE VDO_CMD_VENDOR(10)
72 #define VDO_CMD_CURRENT VDO_CMD_VENDOR(11)
73 #define VDO_CMD_FLIP VDO_CMD_VENDOR(12)
74 #define VDO_CMD_GET_LOG VDO_CMD_VENDOR(13)
75 #define VDO_CMD_CCD_EN VDO_CMD_VENDOR(14)
77 #define PD_VDO_VID(vdo) ((vdo) >> 16)
78 #define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1)
79 #define PD_VDO_SVDM_VER(vdo) (((vdo) >> 13) & 0x3)
80 #define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7)
81 #define PD_VDO_CMD(vdo) ((vdo) & 0x1f)
82 #define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3)
85 * SVDM Identity request -> response
87 * Request is simply properly formatted SVDM header
89 * Response is 4 data objects:
91 * [1] :: Identitiy header
92 * [2] :: Cert Stat VDO
93 * [3] :: (Product | Cable) VDO
97 #define VDO_INDEX_HDR 0
98 #define VDO_INDEX_IDH 1
99 #define VDO_INDEX_CSTAT 2
100 #define VDO_INDEX_CABLE 3
101 #define VDO_INDEX_PRODUCT 3
102 #define VDO_INDEX_AMA 4
105 * SVDM Identity Header
106 * --------------------
107 * <31> :: data capable as a USB host
108 * <30> :: data capable as a USB device
109 * <29:27> :: product type (UFP / Cable / VPD)
110 * <26> :: modal operation supported (1b == yes)
111 * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0)
112 * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0)
113 * <20:16> :: Reserved, Shall be set to zero
114 * <15:0> :: USB-IF assigned VID for this cable vendor
117 /* PD Rev2.0 definition */
118 #define IDH_PTYPE_UNDEF 0
120 /* SOP Product Type (UFP) */
121 #define IDH_PTYPE_NOT_UFP 0
122 #define IDH_PTYPE_HUB 1
123 #define IDH_PTYPE_PERIPH 2
124 #define IDH_PTYPE_PSD 3
125 #define IDH_PTYPE_AMA 5
127 /* SOP' Product Type (Cable Plug / VPD) */
128 #define IDH_PTYPE_NOT_CABLE 0
129 #define IDH_PTYPE_PCABLE 3
130 #define IDH_PTYPE_ACABLE 4
131 #define IDH_PTYPE_VPD 6
133 /* SOP Product Type (DFP) */
134 #define IDH_PTYPE_NOT_DFP 0
135 #define IDH_PTYPE_DFP_HUB 1
136 #define IDH_PTYPE_DFP_HOST 2
137 #define IDH_PTYPE_DFP_PB 3
140 #define IDH_DFP_MASK GENMASK(25, 23)
141 #define IDH_CONN_MASK GENMASK(22, 21)
143 #define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \
144 ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \
145 | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21 \
148 #define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7)
149 #define PD_IDH_VID(vdo) ((vdo) & 0xffff)
150 #define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26))
151 #define PD_IDH_DFP_PTYPE(vdo) (((vdo) >> 23) & 0x7)
152 #define PD_IDH_CONN_TYPE(vdo) (((vdo) >> 21) & 0x3)
157 * <31:0> : USB-IF assigned XID for this cable
159 #define PD_CSTAT_XID(vdo) (vdo)
160 #define VDO_CERT(xid) ((xid) & 0xffffffff)
165 * <31:16> : USB Product ID
166 * <15:0> : USB bcdDevice
168 #define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
169 #define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff)
172 * UFP VDO (PD Revision 3.0+ only)
174 * <31:29> :: UFP VDO version
176 * <27:24> :: Device capability
177 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
178 * <21:11> :: Reserved
179 * <10:8> :: Vconn power (AMA only)
180 * <7> :: Vconn required (AMA only, 0b == no, 1b == yes)
181 * <6> :: Vbus required (AMA only, 0b == yes, 1b == no)
182 * <5:3> :: Alternate modes
183 * <2:0> :: USB highest speed
185 #define PD_VDO_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24)
187 /* UFP VDO Version */
188 #define UFP_VDO_VER1_2 2
190 /* Device Capability */
191 #define DEV_USB2_CAPABLE BIT(0)
192 #define DEV_USB2_BILLBOARD BIT(1)
193 #define DEV_USB3_CAPABLE BIT(2)
194 #define DEV_USB4_CAPABLE BIT(3)
197 #define UFP_RECEPTACLE 2
198 #define UFP_CAPTIVE 3
200 /* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */
201 #define AMA_VCONN_PWR_1W 0
202 #define AMA_VCONN_PWR_1W5 1
203 #define AMA_VCONN_PWR_2W 2
204 #define AMA_VCONN_PWR_3W 3
205 #define AMA_VCONN_PWR_4W 4
206 #define AMA_VCONN_PWR_5W 5
207 #define AMA_VCONN_PWR_6W 6
209 /* Vconn Required (AMA only) */
210 #define AMA_VCONN_NOT_REQ 0
211 #define AMA_VCONN_REQ 1
213 /* Vbus Required (AMA only) */
214 #define AMA_VBUS_REQ 0
215 #define AMA_VBUS_NOT_REQ 1
217 /* Alternate Modes */
218 #define UFP_ALTMODE_NOT_SUPP 0
219 #define UFP_ALTMODE_TBT3 BIT(0)
220 #define UFP_ALTMODE_RECFG BIT(1)
221 #define UFP_ALTMODE_NO_RECFG BIT(2)
223 /* USB Highest Speed */
224 #define UFP_USB2_ONLY 0
225 #define UFP_USB32_GEN1 1
226 #define UFP_USB32_4_GEN2 2
227 #define UFP_USB4_GEN3 3
229 #define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \
230 (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22 \
231 | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \
235 * DFP VDO (PD Revision 3.0+ only)
237 * <31:29> :: DFP VDO version
238 * <28:27> :: Reserved
239 * <26:24> :: Host capability
240 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
242 * <4:0> :: Port number
244 #define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24)
246 #define DFP_VDO_VER1_1 1
247 #define HOST_USB2_CAPABLE BIT(0)
248 #define HOST_USB3_CAPABLE BIT(1)
249 #define HOST_USB4_CAPABLE BIT(2)
250 #define DFP_RECEPTACLE 2
251 #define DFP_CAPTIVE 3
253 #define VDO_DFP(ver, cap, conn, pnum) \
254 (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22 \
258 * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0)
260 * <31:28> :: Cable HW version
261 * <27:24> :: Cable FW version
262 * <23:20> :: Reserved, Shall be set to zero
263 * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
264 * <17> :: Reserved, Shall be set to zero
265 * <16:13> :: cable latency (0001 == <10ns(~1m length))
266 * <12:11> :: cable termination type (11b == both ends active VCONN req)
267 * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
268 * <9> :: SSTX2 Directionality support
269 * <8> :: SSRX1 Directionality support
270 * <7> :: SSRX2 Directionality support
271 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
272 * <4> :: Vbus through cable (0b == no, 1b == yes)
273 * <3> :: SOP" controller present? (0b == no, 1b == yes)
274 * <2:0> :: USB SS Signaling support
276 * Passive Cable VDO (PD Rev3.0+)
278 * <31:28> :: Cable HW version
279 * <27:24> :: Cable FW version
280 * <23:21> :: VDO version
281 * <20> :: Reserved, Shall be set to zero
282 * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
283 * <17> :: Reserved, Shall be set to zero
284 * <16:13> :: cable latency (0001 == <10ns(~1m length))
285 * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
286 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
287 * <8:7> :: Reserved, Shall be set to zero
288 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
289 * <4:3> :: Reserved, Shall be set to zero
290 * <2:0> :: USB highest speed
292 * Active Cable VDO 1 (PD Rev3.0+)
294 * <31:28> :: Cable HW version
295 * <27:24> :: Cable FW version
296 * <23:21> :: VDO version
297 * <20> :: Reserved, Shall be set to zero
298 * <19:18> :: Connector type (10b == C, 11b == Captive)
299 * <17> :: Reserved, Shall be set to zero
300 * <16:13> :: cable latency (0001 == <10ns(~1m length))
301 * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
302 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
303 * <8> :: SBU supported (0b == supported, 1b == not supported)
304 * <7> :: SBU type (0b == passive, 1b == active)
305 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
306 * <4> :: Vbus through cable (0b == no, 1b == yes)
307 * <3> :: SOP" controller present? (0b == no, 1b == yes)
308 * <2:0> :: USB highest speed
310 /* Cable VDO Version */
311 #define CABLE_VDO_VER1_0 0
312 #define CABLE_VDO_VER1_3 3
314 /* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */
315 #define CABLE_ATYPE 0
316 #define CABLE_BTYPE 1
317 #define CABLE_CTYPE 2
318 #define CABLE_CAPTIVE 3
321 #define CABLE_LATENCY_1M 1
322 #define CABLE_LATENCY_2M 2
323 #define CABLE_LATENCY_3M 3
324 #define CABLE_LATENCY_4M 4
325 #define CABLE_LATENCY_5M 5
326 #define CABLE_LATENCY_6M 6
327 #define CABLE_LATENCY_7M 7
328 #define CABLE_LATENCY_7M_PLUS 8
330 /* Cable Termination Type */
331 #define PCABLE_VCONN_NOT_REQ 0
332 #define PCABLE_VCONN_REQ 1
333 #define ACABLE_ONE_END 2
334 #define ACABLE_BOTH_END 3
336 /* Maximum Vbus Voltage */
337 #define CABLE_MAX_VBUS_20V 0
338 #define CABLE_MAX_VBUS_30V 1
339 #define CABLE_MAX_VBUS_40V 2
340 #define CABLE_MAX_VBUS_50V 3
342 /* Active Cable SBU Supported/Type */
343 #define ACABLE_SBU_SUPP 0
344 #define ACABLE_SBU_NOT_SUPP 1
345 #define ACABLE_SBU_PASSIVE 0
346 #define ACABLE_SBU_ACTIVE 1
348 /* Vbus Current Handling Capability */
349 #define CABLE_CURR_DEF 0
350 #define CABLE_CURR_3A 1
351 #define CABLE_CURR_5A 2
353 /* USB SuperSpeed Signaling Support (PD Rev2.0) */
354 #define CABLE_USBSS_U2_ONLY 0
355 #define CABLE_USBSS_U31_GEN1 1
356 #define CABLE_USBSS_U31_GEN2 2
358 /* USB Highest Speed */
359 #define CABLE_USB2_ONLY 0
360 #define CABLE_USB32_GEN1 1
361 #define CABLE_USB32_4_GEN2 2
362 #define CABLE_USB4_GEN3 3
364 #define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \
365 (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \
366 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \
367 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \
368 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
369 #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \
370 (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \
371 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \
372 | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7))
373 #define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \
374 (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \
375 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \
376 | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \
377 | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7))
379 #define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3)
384 * <31:24> :: Maximum operating temperature
385 * <23:16> :: Shutdown temperature
386 * <15> :: Reserved, Shall be set to zero
387 * <14:12> :: U3/CLd power
388 * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
389 * <10> :: Physical connection (0b == copper, 1b == optical)
390 * <9> :: Active element (0b == redriver, 1b == retimer)
391 * <8> :: USB4 supported (0b == yes, 1b == no)
392 * <7:6> :: USB2 hub hops consumed
393 * <5> :: USB2 supported (0b == yes, 1b == no)
394 * <4> :: USB3.2 supported (0b == yes, 1b == no)
395 * <3> :: USB lanes supported (0b == one lane, 1b == two lanes)
396 * <2> :: Optically isolated active cable (0b == no, 1b == yes)
397 * <1> :: Reserved, Shall be set to zero
398 * <0> :: USB gen (0b == gen1, 1b == gen2+)
401 #define ACAB2_U3_CLD_10MW_PLUS 0
402 #define ACAB2_U3_CLD_10MW 1
403 #define ACAB2_U3_CLD_5MW 2
404 #define ACAB2_U3_CLD_1MW 3
405 #define ACAB2_U3_CLD_500UW 4
406 #define ACAB2_U3_CLD_200UW 5
407 #define ACAB2_U3_CLD_50UW 6
409 /* Other Active Cable VDO 2 Fields */
410 #define ACAB2_U3U0_DIRECT 0
411 #define ACAB2_U3U0_U3S 1
412 #define ACAB2_PHY_COPPER 0
413 #define ACAB2_PHY_OPTICAL 1
414 #define ACAB2_REDRIVER 0
415 #define ACAB2_RETIMER 1
416 #define ACAB2_USB4_SUPP 0
417 #define ACAB2_USB4_NOT_SUPP 1
418 #define ACAB2_USB2_SUPP 0
419 #define ACAB2_USB2_NOT_SUPP 1
420 #define ACAB2_USB32_SUPP 0
421 #define ACAB2_USB32_NOT_SUPP 1
422 #define ACAB2_LANES_ONE 0
423 #define ACAB2_LANES_TWO 1
424 #define ACAB2_OPT_ISO_NO 0
425 #define ACAB2_OPT_ISO_YES 1
426 #define ACAB2_GEN_1 0
427 #define ACAB2_GEN_2_PLUS 1
429 #define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \
430 (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12 \
431 | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \
432 | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \
433 | (iso) << 2 | (gen))
436 * AMA VDO (PD Rev2.0)
438 * <31:28> :: Cable HW version
439 * <27:24> :: Cable FW version
440 * <23:12> :: Reserved, Shall be set to zero
441 * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
442 * <10> :: SSTX2 Directionality support
443 * <9> :: SSRX1 Directionality support
444 * <8> :: SSRX2 Directionality support
445 * <7:5> :: Vconn power
446 * <4> :: Vconn power required
447 * <3> :: Vbus power required
448 * <2:0> :: USB SS Signaling support
450 #define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
451 (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \
452 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \
453 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \
456 #define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1)
457 #define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1)
459 #define AMA_USBSS_U2_ONLY 0
460 #define AMA_USBSS_U31_GEN1 1
461 #define AMA_USBSS_U31_GEN2 2
462 #define AMA_USBSS_BBONLY 3
467 * <31:28> :: HW version
468 * <27:24> :: FW version
469 * <23:21> :: VDO version
470 * <20:17> :: Reserved, Shall be set to zero
471 * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
472 * <14> :: Charge through current support (0b == 3A, 1b == 5A)
473 * <13> :: Reserved, Shall be set to zero
474 * <12:7> :: Vbus impedance
475 * <6:1> :: Ground impedance
476 * <0> :: Charge through support (0b == no, 1b == yes)
478 #define VPD_VDO_VER1_0 0
479 #define VPD_MAX_VBUS_20V 0
480 #define VPD_MAX_VBUS_30V 1
481 #define VPD_MAX_VBUS_40V 2
482 #define VPD_MAX_VBUS_50V 3
483 #define VPDCT_CURR_3A 0
484 #define VPDCT_CURR_5A 1
485 #define VPDCT_NOT_SUPP 0
488 #define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \
489 (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \
490 | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \
491 | ((gi) & 0x3f) << 1 | (ct))
494 * SVDM Discover SVIDs request -> response
496 * Request is properly formatted VDM Header with discover SVIDs command.
497 * Response is a set of SVIDs of all supported SVIDs with all zero's to
498 * mark the end of SVIDs. If more than 12 SVIDs are supported command SHOULD be
501 #define VDO_SVID(svid0, svid1) (((svid0) & 0xffff) << 16 | ((svid1) & 0xffff))
502 #define PD_VDO_SVID_SVID0(vdo) ((vdo) >> 16)
503 #define PD_VDO_SVID_SVID1(vdo) ((vdo) & 0xffff)
506 #define USB_SID_PD 0xff00 /* power delivery */
507 #define USB_SID_DISPLAYPORT 0xff01
508 #define USB_SID_MHL 0xff02 /* Mobile High-Definition Link */
510 /* VDM command timeouts (in ms) */
512 #define PD_T_VDM_UNSTRUCTURED 500
513 #define PD_T_VDM_BUSY 100
514 #define PD_T_VDM_WAIT_MODE_E 100
515 #define PD_T_VDM_SNDR_RSP 30
516 #define PD_T_VDM_E_MODE 25
517 #define PD_T_VDM_RCVR_RSP 15
519 #endif /* __LINUX_USB_PD_VDO_H */