Merge tag 'sound-fix-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
[linux-2.6-microblaze.git] / include / linux / scatterlist.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _LINUX_SCATTERLIST_H
3 #define _LINUX_SCATTERLIST_H
4
5 #include <linux/string.h>
6 #include <linux/types.h>
7 #include <linux/bug.h>
8 #include <linux/mm.h>
9 #include <asm/io.h>
10
11 struct scatterlist {
12         unsigned long   page_link;
13         unsigned int    offset;
14         unsigned int    length;
15         dma_addr_t      dma_address;
16 #ifdef CONFIG_NEED_SG_DMA_LENGTH
17         unsigned int    dma_length;
18 #endif
19 };
20
21 /*
22  * Since the above length field is an unsigned int, below we define the maximum
23  * length in bytes that can be stored in one scatterlist entry.
24  */
25 #define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK)
26
27 /*
28  * These macros should be used after a dma_map_sg call has been done
29  * to get bus addresses of each of the SG entries and their lengths.
30  * You should only work with the number of sg entries dma_map_sg
31  * returns, or alternatively stop on the first sg_dma_len(sg) which
32  * is 0.
33  */
34 #define sg_dma_address(sg)      ((sg)->dma_address)
35
36 #ifdef CONFIG_NEED_SG_DMA_LENGTH
37 #define sg_dma_len(sg)          ((sg)->dma_length)
38 #else
39 #define sg_dma_len(sg)          ((sg)->length)
40 #endif
41
42 struct sg_table {
43         struct scatterlist *sgl;        /* the list */
44         unsigned int nents;             /* number of mapped entries */
45         unsigned int orig_nents;        /* original size of list */
46 };
47
48 /*
49  * Notes on SG table design.
50  *
51  * We use the unsigned long page_link field in the scatterlist struct to place
52  * the page pointer AND encode information about the sg table as well. The two
53  * lower bits are reserved for this information.
54  *
55  * If bit 0 is set, then the page_link contains a pointer to the next sg
56  * table list. Otherwise the next entry is at sg + 1.
57  *
58  * If bit 1 is set, then this sg entry is the last element in a list.
59  *
60  * See sg_next().
61  *
62  */
63
64 #define SG_CHAIN        0x01UL
65 #define SG_END          0x02UL
66
67 /*
68  * We overload the LSB of the page pointer to indicate whether it's
69  * a valid sg entry, or whether it points to the start of a new scatterlist.
70  * Those low bits are there for everyone! (thanks mason :-)
71  */
72 #define sg_is_chain(sg)         ((sg)->page_link & SG_CHAIN)
73 #define sg_is_last(sg)          ((sg)->page_link & SG_END)
74 #define sg_chain_ptr(sg)        \
75         ((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END)))
76
77 /**
78  * sg_assign_page - Assign a given page to an SG entry
79  * @sg:             SG entry
80  * @page:           The page
81  *
82  * Description:
83  *   Assign page to sg entry. Also see sg_set_page(), the most commonly used
84  *   variant.
85  *
86  **/
87 static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
88 {
89         unsigned long page_link = sg->page_link & (SG_CHAIN | SG_END);
90
91         /*
92          * In order for the low bit stealing approach to work, pages
93          * must be aligned at a 32-bit boundary as a minimum.
94          */
95         BUG_ON((unsigned long) page & (SG_CHAIN | SG_END));
96 #ifdef CONFIG_DEBUG_SG
97         BUG_ON(sg_is_chain(sg));
98 #endif
99         sg->page_link = page_link | (unsigned long) page;
100 }
101
102 /**
103  * sg_set_page - Set sg entry to point at given page
104  * @sg:          SG entry
105  * @page:        The page
106  * @len:         Length of data
107  * @offset:      Offset into page
108  *
109  * Description:
110  *   Use this function to set an sg entry pointing at a page, never assign
111  *   the page directly. We encode sg table information in the lower bits
112  *   of the page pointer. See sg_page() for looking up the page belonging
113  *   to an sg entry.
114  *
115  **/
116 static inline void sg_set_page(struct scatterlist *sg, struct page *page,
117                                unsigned int len, unsigned int offset)
118 {
119         sg_assign_page(sg, page);
120         sg->offset = offset;
121         sg->length = len;
122 }
123
124 static inline struct page *sg_page(struct scatterlist *sg)
125 {
126 #ifdef CONFIG_DEBUG_SG
127         BUG_ON(sg_is_chain(sg));
128 #endif
129         return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END));
130 }
131
132 /**
133  * sg_set_buf - Set sg entry to point at given data
134  * @sg:          SG entry
135  * @buf:         Data
136  * @buflen:      Data length
137  *
138  **/
139 static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
140                               unsigned int buflen)
141 {
142 #ifdef CONFIG_DEBUG_SG
143         BUG_ON(!virt_addr_valid(buf));
144 #endif
145         sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
146 }
147
148 /*
149  * Loop over each sg element, following the pointer to a new list if necessary
150  */
151 #define for_each_sg(sglist, sg, nr, __i)        \
152         for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg))
153
154 /*
155  * Loop over each sg element in the given sg_table object.
156  */
157 #define for_each_sgtable_sg(sgt, sg, i)         \
158         for_each_sg((sgt)->sgl, sg, (sgt)->orig_nents, i)
159
160 /*
161  * Loop over each sg element in the given *DMA mapped* sg_table object.
162  * Please use sg_dma_address(sg) and sg_dma_len(sg) to extract DMA addresses
163  * of the each element.
164  */
165 #define for_each_sgtable_dma_sg(sgt, sg, i)     \
166         for_each_sg((sgt)->sgl, sg, (sgt)->nents, i)
167
168 /**
169  * sg_chain - Chain two sglists together
170  * @prv:        First scatterlist
171  * @prv_nents:  Number of entries in prv
172  * @sgl:        Second scatterlist
173  *
174  * Description:
175  *   Links @prv@ and @sgl@ together, to form a longer scatterlist.
176  *
177  **/
178 static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents,
179                             struct scatterlist *sgl)
180 {
181         /*
182          * offset and length are unused for chain entry.  Clear them.
183          */
184         prv[prv_nents - 1].offset = 0;
185         prv[prv_nents - 1].length = 0;
186
187         /*
188          * Set lowest bit to indicate a link pointer, and make sure to clear
189          * the termination bit if it happens to be set.
190          */
191         prv[prv_nents - 1].page_link = ((unsigned long) sgl | SG_CHAIN)
192                                         & ~SG_END;
193 }
194
195 /**
196  * sg_mark_end - Mark the end of the scatterlist
197  * @sg:          SG entryScatterlist
198  *
199  * Description:
200  *   Marks the passed in sg entry as the termination point for the sg
201  *   table. A call to sg_next() on this entry will return NULL.
202  *
203  **/
204 static inline void sg_mark_end(struct scatterlist *sg)
205 {
206         /*
207          * Set termination bit, clear potential chain bit
208          */
209         sg->page_link |= SG_END;
210         sg->page_link &= ~SG_CHAIN;
211 }
212
213 /**
214  * sg_unmark_end - Undo setting the end of the scatterlist
215  * @sg:          SG entryScatterlist
216  *
217  * Description:
218  *   Removes the termination marker from the given entry of the scatterlist.
219  *
220  **/
221 static inline void sg_unmark_end(struct scatterlist *sg)
222 {
223         sg->page_link &= ~SG_END;
224 }
225
226 /**
227  * sg_phys - Return physical address of an sg entry
228  * @sg:      SG entry
229  *
230  * Description:
231  *   This calls page_to_phys() on the page in this sg entry, and adds the
232  *   sg offset. The caller must know that it is legal to call page_to_phys()
233  *   on the sg page.
234  *
235  **/
236 static inline dma_addr_t sg_phys(struct scatterlist *sg)
237 {
238         return page_to_phys(sg_page(sg)) + sg->offset;
239 }
240
241 /**
242  * sg_virt - Return virtual address of an sg entry
243  * @sg:      SG entry
244  *
245  * Description:
246  *   This calls page_address() on the page in this sg entry, and adds the
247  *   sg offset. The caller must know that the sg page has a valid virtual
248  *   mapping.
249  *
250  **/
251 static inline void *sg_virt(struct scatterlist *sg)
252 {
253         return page_address(sg_page(sg)) + sg->offset;
254 }
255
256 /**
257  * sg_init_marker - Initialize markers in sg table
258  * @sgl:           The SG table
259  * @nents:         Number of entries in table
260  *
261  **/
262 static inline void sg_init_marker(struct scatterlist *sgl,
263                                   unsigned int nents)
264 {
265         sg_mark_end(&sgl[nents - 1]);
266 }
267
268 int sg_nents(struct scatterlist *sg);
269 int sg_nents_for_len(struct scatterlist *sg, u64 len);
270 struct scatterlist *sg_next(struct scatterlist *);
271 struct scatterlist *sg_last(struct scatterlist *s, unsigned int);
272 void sg_init_table(struct scatterlist *, unsigned int);
273 void sg_init_one(struct scatterlist *, const void *, unsigned int);
274 int sg_split(struct scatterlist *in, const int in_mapped_nents,
275              const off_t skip, const int nb_splits,
276              const size_t *split_sizes,
277              struct scatterlist **out, int *out_mapped_nents,
278              gfp_t gfp_mask);
279
280 typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t);
281 typedef void (sg_free_fn)(struct scatterlist *, unsigned int);
282
283 void __sg_free_table(struct sg_table *, unsigned int, unsigned int,
284                      sg_free_fn *);
285 void sg_free_table(struct sg_table *);
286 int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int,
287                      struct scatterlist *, unsigned int, gfp_t, sg_alloc_fn *);
288 int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);
289 int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
290                                 unsigned int n_pages, unsigned int offset,
291                                 unsigned long size, unsigned int max_segment,
292                                 gfp_t gfp_mask);
293 int sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
294                               unsigned int n_pages, unsigned int offset,
295                               unsigned long size, gfp_t gfp_mask);
296
297 #ifdef CONFIG_SGL_ALLOC
298 struct scatterlist *sgl_alloc_order(unsigned long long length,
299                                     unsigned int order, bool chainable,
300                                     gfp_t gfp, unsigned int *nent_p);
301 struct scatterlist *sgl_alloc(unsigned long long length, gfp_t gfp,
302                               unsigned int *nent_p);
303 void sgl_free_n_order(struct scatterlist *sgl, int nents, int order);
304 void sgl_free_order(struct scatterlist *sgl, int order);
305 void sgl_free(struct scatterlist *sgl);
306 #endif /* CONFIG_SGL_ALLOC */
307
308 size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
309                       size_t buflen, off_t skip, bool to_buffer);
310
311 size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
312                            const void *buf, size_t buflen);
313 size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
314                          void *buf, size_t buflen);
315
316 size_t sg_pcopy_from_buffer(struct scatterlist *sgl, unsigned int nents,
317                             const void *buf, size_t buflen, off_t skip);
318 size_t sg_pcopy_to_buffer(struct scatterlist *sgl, unsigned int nents,
319                           void *buf, size_t buflen, off_t skip);
320 size_t sg_zero_buffer(struct scatterlist *sgl, unsigned int nents,
321                        size_t buflen, off_t skip);
322
323 /*
324  * Maximum number of entries that will be allocated in one piece, if
325  * a list larger than this is required then chaining will be utilized.
326  */
327 #define SG_MAX_SINGLE_ALLOC             (PAGE_SIZE / sizeof(struct scatterlist))
328
329 /*
330  * The maximum number of SG segments that we will put inside a
331  * scatterlist (unless chaining is used). Should ideally fit inside a
332  * single page, to avoid a higher order allocation.  We could define this
333  * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
334  * minimum value is 32
335  */
336 #define SG_CHUNK_SIZE   128
337
338 /*
339  * Like SG_CHUNK_SIZE, but for archs that have sg chaining. This limit
340  * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
341  */
342 #ifdef CONFIG_ARCH_NO_SG_CHAIN
343 #define SG_MAX_SEGMENTS SG_CHUNK_SIZE
344 #else
345 #define SG_MAX_SEGMENTS 2048
346 #endif
347
348 #ifdef CONFIG_SG_POOL
349 void sg_free_table_chained(struct sg_table *table,
350                            unsigned nents_first_chunk);
351 int sg_alloc_table_chained(struct sg_table *table, int nents,
352                            struct scatterlist *first_chunk,
353                            unsigned nents_first_chunk);
354 #endif
355
356 /*
357  * sg page iterator
358  *
359  * Iterates over sg entries page-by-page.  On each successful iteration, you
360  * can call sg_page_iter_page(@piter) to get the current page.
361  * @piter->sg will point to the sg holding this page and @piter->sg_pgoffset to
362  * the page's page offset within the sg. The iteration will stop either when a
363  * maximum number of sg entries was reached or a terminating sg
364  * (sg_last(sg) == true) was reached.
365  */
366 struct sg_page_iter {
367         struct scatterlist      *sg;            /* sg holding the page */
368         unsigned int            sg_pgoffset;    /* page offset within the sg */
369
370         /* these are internal states, keep away */
371         unsigned int            __nents;        /* remaining sg entries */
372         int                     __pg_advance;   /* nr pages to advance at the
373                                                  * next step */
374 };
375
376 /*
377  * sg page iterator for DMA addresses
378  *
379  * This is the same as sg_page_iter however you can call
380  * sg_page_iter_dma_address(@dma_iter) to get the page's DMA
381  * address. sg_page_iter_page() cannot be called on this iterator.
382  */
383 struct sg_dma_page_iter {
384         struct sg_page_iter base;
385 };
386
387 bool __sg_page_iter_next(struct sg_page_iter *piter);
388 bool __sg_page_iter_dma_next(struct sg_dma_page_iter *dma_iter);
389 void __sg_page_iter_start(struct sg_page_iter *piter,
390                           struct scatterlist *sglist, unsigned int nents,
391                           unsigned long pgoffset);
392 /**
393  * sg_page_iter_page - get the current page held by the page iterator
394  * @piter:      page iterator holding the page
395  */
396 static inline struct page *sg_page_iter_page(struct sg_page_iter *piter)
397 {
398         return nth_page(sg_page(piter->sg), piter->sg_pgoffset);
399 }
400
401 /**
402  * sg_page_iter_dma_address - get the dma address of the current page held by
403  * the page iterator.
404  * @dma_iter:   page iterator holding the page
405  */
406 static inline dma_addr_t
407 sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
408 {
409         return sg_dma_address(dma_iter->base.sg) +
410                (dma_iter->base.sg_pgoffset << PAGE_SHIFT);
411 }
412
413 /**
414  * for_each_sg_page - iterate over the pages of the given sg list
415  * @sglist:     sglist to iterate over
416  * @piter:      page iterator to hold current page, sg, sg_pgoffset
417  * @nents:      maximum number of sg entries to iterate over
418  * @pgoffset:   starting page offset (in pages)
419  *
420  * Callers may use sg_page_iter_page() to get each page pointer.
421  * In each loop it operates on PAGE_SIZE unit.
422  */
423 #define for_each_sg_page(sglist, piter, nents, pgoffset)                   \
424         for (__sg_page_iter_start((piter), (sglist), (nents), (pgoffset)); \
425              __sg_page_iter_next(piter);)
426
427 /**
428  * for_each_sg_dma_page - iterate over the pages of the given sg list
429  * @sglist:     sglist to iterate over
430  * @dma_iter:   DMA page iterator to hold current page
431  * @dma_nents:  maximum number of sg entries to iterate over, this is the value
432  *              returned from dma_map_sg
433  * @pgoffset:   starting page offset (in pages)
434  *
435  * Callers may use sg_page_iter_dma_address() to get each page's DMA address.
436  * In each loop it operates on PAGE_SIZE unit.
437  */
438 #define for_each_sg_dma_page(sglist, dma_iter, dma_nents, pgoffset)            \
439         for (__sg_page_iter_start(&(dma_iter)->base, sglist, dma_nents,        \
440                                   pgoffset);                                   \
441              __sg_page_iter_dma_next(dma_iter);)
442
443 /**
444  * for_each_sgtable_page - iterate over all pages in the sg_table object
445  * @sgt:        sg_table object to iterate over
446  * @piter:      page iterator to hold current page
447  * @pgoffset:   starting page offset (in pages)
448  *
449  * Iterates over the all memory pages in the buffer described by
450  * a scatterlist stored in the given sg_table object.
451  * See also for_each_sg_page(). In each loop it operates on PAGE_SIZE unit.
452  */
453 #define for_each_sgtable_page(sgt, piter, pgoffset)     \
454         for_each_sg_page((sgt)->sgl, piter, (sgt)->orig_nents, pgoffset)
455
456 /**
457  * for_each_sgtable_dma_page - iterate over the DMA mapped sg_table object
458  * @sgt:        sg_table object to iterate over
459  * @dma_iter:   DMA page iterator to hold current page
460  * @pgoffset:   starting page offset (in pages)
461  *
462  * Iterates over the all DMA mapped pages in the buffer described by
463  * a scatterlist stored in the given sg_table object.
464  * See also for_each_sg_dma_page(). In each loop it operates on PAGE_SIZE
465  * unit.
466  */
467 #define for_each_sgtable_dma_page(sgt, dma_iter, pgoffset)      \
468         for_each_sg_dma_page((sgt)->sgl, dma_iter, (sgt)->nents, pgoffset)
469
470
471 /*
472  * Mapping sg iterator
473  *
474  * Iterates over sg entries mapping page-by-page.  On each successful
475  * iteration, @miter->page points to the mapped page and
476  * @miter->length bytes of data can be accessed at @miter->addr.  As
477  * long as an interation is enclosed between start and stop, the user
478  * is free to choose control structure and when to stop.
479  *
480  * @miter->consumed is set to @miter->length on each iteration.  It
481  * can be adjusted if the user can't consume all the bytes in one go.
482  * Also, a stopped iteration can be resumed by calling next on it.
483  * This is useful when iteration needs to release all resources and
484  * continue later (e.g. at the next interrupt).
485  */
486
487 #define SG_MITER_ATOMIC         (1 << 0)         /* use kmap_atomic */
488 #define SG_MITER_TO_SG          (1 << 1)        /* flush back to phys on unmap */
489 #define SG_MITER_FROM_SG        (1 << 2)        /* nop */
490
491 struct sg_mapping_iter {
492         /* the following three fields can be accessed directly */
493         struct page             *page;          /* currently mapped page */
494         void                    *addr;          /* pointer to the mapped area */
495         size_t                  length;         /* length of the mapped area */
496         size_t                  consumed;       /* number of consumed bytes */
497         struct sg_page_iter     piter;          /* page iterator */
498
499         /* these are internal states, keep away */
500         unsigned int            __offset;       /* offset within page */
501         unsigned int            __remaining;    /* remaining bytes on page */
502         unsigned int            __flags;
503 };
504
505 void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
506                     unsigned int nents, unsigned int flags);
507 bool sg_miter_skip(struct sg_mapping_iter *miter, off_t offset);
508 bool sg_miter_next(struct sg_mapping_iter *miter);
509 void sg_miter_stop(struct sg_mapping_iter *miter);
510
511 #endif /* _LINUX_SCATTERLIST_H */