1 /* SPDX-License-Identifier: GPL-2.0-or-later */
5 * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
9 * Copyright 2008 Wolfson Microelectronics PLC.
11 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 * Copyright (c) 2009 Nokia Corporation
14 * Roger Quadros <ext-roger.quadros@nokia.com>
17 #ifndef __REGULATOR_GPIO_H
18 #define __REGULATOR_GPIO_H
20 #include <linux/gpio/consumer.h>
22 struct regulator_init_data;
27 * struct gpio_regulator_state - state description
28 * @value: microvolts or microamps
29 * @gpios: bitfield of gpio target-states for the value
31 * This structure describes a supported setting of the regulator
32 * and the necessary gpio-state to achieve it.
34 * The n-th bit in the bitfield describes the state of the n-th GPIO
35 * from the gpios-array defined in gpio_regulator_config below.
37 struct gpio_regulator_state {
43 * struct gpio_regulator_config - config structure
44 * @supply_name: Name of the regulator supply
45 * @enabled_at_boot: Whether regulator has been enabled at
46 * boot or not. 1 = Yes, 0 = No
47 * This is used to keep the regulator at
49 * @startup_delay: Start-up time in microseconds
50 * @gflags: Array of GPIO configuration flags for initial
52 * @ngpios: Number of GPIOs and configurations available
53 * @states: Array of gpio_regulator_state entries describing
54 * the gpio state for specific voltages
55 * @nr_states: Number of states available
56 * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
57 * @init_data: regulator_init_data
59 * This structure contains gpio-voltage regulator configuration
60 * information that must be passed by platform code to the
61 * gpio-voltage regulator driver.
63 struct gpio_regulator_config {
64 const char *supply_name;
66 unsigned enabled_at_boot:1;
67 unsigned startup_delay;
69 enum gpiod_flags *gflags;
72 struct gpio_regulator_state *states;
75 enum regulator_type type;
76 struct regulator_init_data *init_data;