4 * copyright (c) 2011 Samsung Electronics Co., Ltd
5 * http://www.samsung.com
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
14 #ifndef __LINUX_MFD_SEC_CORE_H
15 #define __LINUX_MFD_SEC_CORE_H
17 enum sec_device_type {
27 * struct sec_pmic_dev - s5m87xx master device for sub-drivers
28 * @dev: master device of the chip (can be used to access platform data)
29 * @pdata: pointer to private data used to pass platform data to child
30 * @i2c: i2c client private data for regulator
31 * @rtc: i2c client private data for rtc
32 * @iolock: mutex for serializing io access
33 * @irqlock: mutex for buslock
34 * @irq_base: base IRQ number for sec-pmic, required for IRQs
35 * @irq: generic IRQ number for s5m87xx
36 * @ono: power onoff IRQ number for s5m87xx
37 * @irq_masks_cur: currently active value
38 * @irq_masks_cache: cached hardware value
39 * @type: indicate which s5m87xx "variant" is used
43 struct sec_platform_data *pdata;
44 struct regmap *regmap_pmic;
45 struct regmap *regmap_rtc;
46 struct i2c_client *i2c;
47 struct i2c_client *rtc;
52 struct regmap_irq_chip_data *irq_data;
60 int sec_irq_init(struct sec_pmic_dev *sec_pmic);
61 void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
62 int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
64 struct sec_platform_data {
65 struct sec_regulator_data *regulators;
66 struct sec_opmode_data *opmode;
71 int (*cfg_pmic_irq)(void);
75 bool buck_voltage_lock;
79 unsigned int buck2_voltage[8];
81 unsigned int buck3_voltage[8];
83 unsigned int buck4_voltage[8];
93 int buck2_default_idx;
94 int buck3_default_idx;
95 int buck4_default_idx;
100 int buck34_ramp_delay;
101 int buck5_ramp_delay;
102 int buck16_ramp_delay;
103 int buck7810_ramp_delay;
104 int buck9_ramp_delay;
105 int buck24_ramp_delay;
106 int buck3_ramp_delay;
107 int buck7_ramp_delay;
108 int buck8910_ramp_delay;
110 bool buck1_ramp_enable;
111 bool buck2_ramp_enable;
112 bool buck3_ramp_enable;
113 bool buck4_ramp_enable;
114 bool buck6_ramp_enable;
122 * sec_regulator_data - regulator data
124 * @initdata: regulator init data (contraints, supplies, ...)
126 struct sec_regulator_data {
128 struct regulator_init_data *initdata;
129 struct device_node *reg_node;
130 int ext_control_gpio;
134 * sec_opmode_data - regulator operation mode data
136 * @mode: regulator operation mode
138 struct sec_opmode_data {
144 * samsung regulator operation mode
145 * SEC_OPMODE_OFF Regulator always OFF
146 * SEC_OPMODE_ON Regulator always ON
147 * SEC_OPMODE_LOWPOWER Regulator is on in low-power mode
148 * SEC_OPMODE_SUSPEND Regulator is changed by PWREN pin
149 * If PWREN is high, regulator is on
150 * If PWREN is low, regulator is off
160 #endif /* __LINUX_MFD_SEC_CORE_H */