1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _LINUX_JIFFIES_H
3 #define _LINUX_JIFFIES_H
5 #include <linux/cache.h>
6 #include <linux/limits.h>
7 #include <linux/math64.h>
8 #include <linux/minmax.h>
9 #include <linux/types.h>
10 #include <linux/time.h>
11 #include <linux/timex.h>
12 #include <vdso/jiffies.h>
13 #include <asm/param.h> /* for HZ */
14 #include <generated/timeconst.h>
17 * The following defines establish the engineering parameters of the PLL
18 * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
19 * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
20 * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
21 * nearest power of two in order to avoid hardware multiply operations.
23 #if HZ >= 12 && HZ < 24
25 #elif HZ >= 24 && HZ < 48
27 #elif HZ >= 48 && HZ < 96
29 #elif HZ >= 96 && HZ < 192
31 #elif HZ >= 192 && HZ < 384
33 #elif HZ >= 384 && HZ < 768
35 #elif HZ >= 768 && HZ < 1536
37 #elif HZ >= 1536 && HZ < 3072
39 #elif HZ >= 3072 && HZ < 6144
41 #elif HZ >= 6144 && HZ < 12288
44 # error Invalid value of HZ.
47 /* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
48 * improve accuracy by shifting LSH bits, hence calculating:
50 * This however means trouble for large NOM, because (NOM << LSH) may no
51 * longer fit in 32 bits. The following way of calculating this gives us
52 * some slack, under the following conditions:
53 * - (NOM / DEN) fits in (32 - LSH) bits.
54 * - (NOM % DEN) fits in (32 - LSH) bits.
56 #define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \
57 + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
59 /* LATCH is used in the interval timer and ftape setup. */
60 #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
62 extern int register_refined_jiffies(long clock_tick_rate);
64 /* TICK_USEC is the time between ticks in usec assuming SHIFTED_HZ */
65 #define TICK_USEC ((USEC_PER_SEC + HZ/2) / HZ)
67 /* USER_TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
68 #define USER_TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
70 #ifndef __jiffy_arch_data
71 #define __jiffy_arch_data
75 * The 64-bit value is not atomic on 32-bit systems - you MUST NOT read it
76 * without sampling the sequence number in jiffies_lock.
77 * get_jiffies_64() will do this for you as appropriate.
79 * jiffies and jiffies_64 are at the same address for little-endian systems
80 * and for 64-bit big-endian systems.
81 * On 32-bit big-endian systems, jiffies is the lower 32 bits of jiffies_64
82 * (i.e., at address @jiffies_64 + 4).
83 * See arch/ARCH/kernel/vmlinux.lds.S
85 extern u64 __cacheline_aligned_in_smp jiffies_64;
86 extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
88 #if (BITS_PER_LONG < 64)
89 u64 get_jiffies_64(void);
92 * get_jiffies_64 - read the 64-bit non-atomic jiffies_64 value
94 * When BITS_PER_LONG < 64, this uses sequence number sampling using
95 * jiffies_lock to protect the 64-bit read.
97 * Return: current 64-bit jiffies value
99 static inline u64 get_jiffies_64(void)
106 * These inlines deal with timer wrapping correctly. You are
107 * strongly encouraged to use them:
108 * 1. Because people otherwise forget
109 * 2. Because if the timer wrap changes in future you won't have to
110 * alter your driver code.
114 * time_after - returns true if the time a is after time b.
115 * @a: first comparable as unsigned long
116 * @b: second comparable as unsigned long
118 * Do this with "<0" and ">=0" to only test the sign of the result. A
119 * good compiler would generate better code (and a really good compiler
120 * wouldn't care). Gcc is currently neither.
122 * Return: %true is time a is after time b, otherwise %false.
124 #define time_after(a,b) \
125 (typecheck(unsigned long, a) && \
126 typecheck(unsigned long, b) && \
127 ((long)((b) - (a)) < 0))
129 * time_before - returns true if the time a is before time b.
130 * @a: first comparable as unsigned long
131 * @b: second comparable as unsigned long
133 * Return: %true is time a is before time b, otherwise %false.
135 #define time_before(a,b) time_after(b,a)
138 * time_after_eq - returns true if the time a is after or the same as time b.
139 * @a: first comparable as unsigned long
140 * @b: second comparable as unsigned long
142 * Return: %true is time a is after or the same as time b, otherwise %false.
144 #define time_after_eq(a,b) \
145 (typecheck(unsigned long, a) && \
146 typecheck(unsigned long, b) && \
147 ((long)((a) - (b)) >= 0))
149 * time_before_eq - returns true if the time a is before or the same as time b.
150 * @a: first comparable as unsigned long
151 * @b: second comparable as unsigned long
153 * Return: %true is time a is before or the same as time b, otherwise %false.
155 #define time_before_eq(a,b) time_after_eq(b,a)
158 * time_in_range - Calculate whether a is in the range of [b, c].
160 * @b: beginning of the range
161 * @c: end of the range
163 * Return: %true is time a is in the range [b, c], otherwise %false.
165 #define time_in_range(a,b,c) \
166 (time_after_eq(a,b) && \
170 * time_in_range_open - Calculate whether a is in the range of [b, c).
172 * @b: beginning of the range
173 * @c: end of the range
175 * Return: %true is time a is in the range [b, c), otherwise %false.
177 #define time_in_range_open(a,b,c) \
178 (time_after_eq(a,b) && \
181 /* Same as above, but does so with platform independent 64bit types.
182 * These must be used when utilizing jiffies_64 (i.e. return value of
183 * get_jiffies_64()). */
186 * time_after64 - returns true if the time a is after time b.
187 * @a: first comparable as __u64
188 * @b: second comparable as __u64
190 * This must be used when utilizing jiffies_64 (i.e. return value of
193 * Return: %true is time a is after time b, otherwise %false.
195 #define time_after64(a,b) \
196 (typecheck(__u64, a) && \
197 typecheck(__u64, b) && \
198 ((__s64)((b) - (a)) < 0))
200 * time_before64 - returns true if the time a is before time b.
201 * @a: first comparable as __u64
202 * @b: second comparable as __u64
204 * This must be used when utilizing jiffies_64 (i.e. return value of
207 * Return: %true is time a is before time b, otherwise %false.
209 #define time_before64(a,b) time_after64(b,a)
212 * time_after_eq64 - returns true if the time a is after or the same as time b.
213 * @a: first comparable as __u64
214 * @b: second comparable as __u64
216 * This must be used when utilizing jiffies_64 (i.e. return value of
219 * Return: %true is time a is after or the same as time b, otherwise %false.
221 #define time_after_eq64(a,b) \
222 (typecheck(__u64, a) && \
223 typecheck(__u64, b) && \
224 ((__s64)((a) - (b)) >= 0))
226 * time_before_eq64 - returns true if the time a is before or the same as time b.
227 * @a: first comparable as __u64
228 * @b: second comparable as __u64
230 * This must be used when utilizing jiffies_64 (i.e. return value of
233 * Return: %true is time a is before or the same as time b, otherwise %false.
235 #define time_before_eq64(a,b) time_after_eq64(b,a)
238 * time_in_range64 - Calculate whether a is in the range of [b, c].
240 * @b: beginning of the range
241 * @c: end of the range
243 * Return: %true is time a is in the range [b, c], otherwise %false.
245 #define time_in_range64(a, b, c) \
246 (time_after_eq64(a, b) && \
247 time_before_eq64(a, c))
250 * These eight macros compare jiffies[_64] and 'a' for convenience.
254 * time_is_before_jiffies - return true if a is before jiffies
255 * @a: time (unsigned long) to compare to jiffies
257 * Return: %true is time a is before jiffies, otherwise %false.
259 #define time_is_before_jiffies(a) time_after(jiffies, a)
261 * time_is_before_jiffies64 - return true if a is before jiffies_64
262 * @a: time (__u64) to compare to jiffies_64
264 * Return: %true is time a is before jiffies_64, otherwise %false.
266 #define time_is_before_jiffies64(a) time_after64(get_jiffies_64(), a)
269 * time_is_after_jiffies - return true if a is after jiffies
270 * @a: time (unsigned long) to compare to jiffies
272 * Return: %true is time a is after jiffies, otherwise %false.
274 #define time_is_after_jiffies(a) time_before(jiffies, a)
276 * time_is_after_jiffies64 - return true if a is after jiffies_64
277 * @a: time (__u64) to compare to jiffies_64
279 * Return: %true is time a is after jiffies_64, otherwise %false.
281 #define time_is_after_jiffies64(a) time_before64(get_jiffies_64(), a)
284 * time_is_before_eq_jiffies - return true if a is before or equal to jiffies
285 * @a: time (unsigned long) to compare to jiffies
287 * Return: %true is time a is before or the same as jiffies, otherwise %false.
289 #define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
291 * time_is_before_eq_jiffies64 - return true if a is before or equal to jiffies_64
292 * @a: time (__u64) to compare to jiffies_64
294 * Return: %true is time a is before or the same jiffies_64, otherwise %false.
296 #define time_is_before_eq_jiffies64(a) time_after_eq64(get_jiffies_64(), a)
299 * time_is_after_eq_jiffies - return true if a is after or equal to jiffies
300 * @a: time (unsigned long) to compare to jiffies
302 * Return: %true is time a is after or the same as jiffies, otherwise %false.
304 #define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
306 * time_is_after_eq_jiffies64 - return true if a is after or equal to jiffies_64
307 * @a: time (__u64) to compare to jiffies_64
309 * Return: %true is time a is after or the same as jiffies_64, otherwise %false.
311 #define time_is_after_eq_jiffies64(a) time_before_eq64(get_jiffies_64(), a)
314 * Have the 32-bit jiffies value wrap 5 minutes after boot
315 * so jiffies wrap bugs show up earlier.
317 #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
320 * Change timeval to jiffies, trying to avoid the
321 * most obvious overflows..
323 * And some not so obvious.
325 * Note that we don't want to return LONG_MAX, because
326 * for various timeout reasons we often end up having
327 * to wait "jiffies+1" in order to guarantee that we wait
328 * at _least_ "jiffies" - so "jiffies+1" had better still
331 #define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
333 extern unsigned long preset_lpj;
336 * We want to do realistic conversions of time so we need to use the same
337 * values the update wall clock code uses as the jiffies size. This value
338 * is: TICK_NSEC (which is defined in timex.h). This
339 * is a constant and is in nanoseconds. We will use scaled math
340 * with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
341 * NSEC_JIFFIE_SC. Note that these defines contain nothing but
342 * constants and so are computed at compile time. SHIFT_HZ (computed in
343 * timex.h) adjusts the scaling for different HZ values.
345 * Scaled math??? What is that?
347 * Scaled math is a way to do integer math on values that would,
348 * otherwise, either overflow, underflow, or cause undesired div
349 * instructions to appear in the execution path. In short, we "scale"
350 * up the operands so they take more bits (more precision, less
351 * underflow), do the desired operation and then "scale" the result back
352 * by the same amount. If we do the scaling by shifting we avoid the
353 * costly mpy and the dastardly div instructions.
355 * Suppose, for example, we want to convert from seconds to jiffies
356 * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE. The
357 * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
358 * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
359 * might calculate at compile time, however, the result will only have
360 * about 3-4 bits of precision (less for smaller values of HZ).
362 * So, we scale as follows:
363 * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
364 * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
365 * Then we make SCALE a power of two so:
366 * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
368 * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
369 * jiff = (sec * SEC_CONV) >> SCALE;
371 * Often the math we use will expand beyond 32-bits so we tell C how to
372 * do this and pass the 64-bit result of the mpy through the ">> SCALE"
373 * which should take the result back to 32-bits. We want this expansion
374 * to capture as much precision as possible. At the same time we don't
375 * want to overflow so we pick the SCALE to avoid this. In this file,
376 * that means using a different scale for each range of HZ values (as
377 * defined in timex.h).
379 * For those who want to know, gcc will give a 64-bit result from a "*"
380 * operator if the result is a long long AND at least one of the
381 * operands is cast to long long (usually just prior to the "*" so as
382 * not to confuse it into thinking it really has a 64-bit operand,
383 * which, buy the way, it can do, but it takes more code and at least 2
386 * We also need to be aware that one second in nanoseconds is only a
387 * couple of bits away from overflowing a 32-bit word, so we MUST use
388 * 64-bits to get the full range time in nanoseconds.
393 * Here are the scales we will use. One for seconds, nanoseconds and
396 * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
397 * check if the sign bit is set. If not, we bump the shift count by 1.
398 * (Gets an extra bit of precision where we can use it.)
399 * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
400 * Haven't tested others.
402 * Limits of cpp (for #if expressions) only long (no long long), but
403 * then we only need the most signicant bit.
406 #define SEC_JIFFIE_SC (31 - SHIFT_HZ)
407 #if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
409 #define SEC_JIFFIE_SC (32 - SHIFT_HZ)
411 #define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
412 #define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
413 TICK_NSEC -1) / (u64)TICK_NSEC))
415 #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
416 TICK_NSEC -1) / (u64)TICK_NSEC))
418 * The maximum jiffie value is (MAX_INT >> 1). Here we translate that
419 * into seconds. The 64-bit case will overflow if we are not careful,
420 * so use the messy SH_DIV macro to do it. Still all constants.
422 #if BITS_PER_LONG < 64
423 # define MAX_SEC_IN_JIFFIES \
424 (long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
425 #else /* take care of overflow on 64-bit machines */
426 # define MAX_SEC_IN_JIFFIES \
427 (SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
432 * Convert various time units to each other:
434 extern unsigned int jiffies_to_msecs(const unsigned long j);
435 extern unsigned int jiffies_to_usecs(const unsigned long j);
438 * jiffies_to_nsecs - Convert jiffies to nanoseconds
441 * Return: nanoseconds value
443 static inline u64 jiffies_to_nsecs(const unsigned long j)
445 return (u64)jiffies_to_usecs(j) * NSEC_PER_USEC;
448 extern u64 jiffies64_to_nsecs(u64 j);
449 extern u64 jiffies64_to_msecs(u64 j);
451 extern unsigned long __msecs_to_jiffies(const unsigned int m);
452 #if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
454 * HZ is equal to or smaller than 1000, and 1000 is a nice round
455 * multiple of HZ, divide with the factor between them, but round
458 static inline unsigned long _msecs_to_jiffies(const unsigned int m)
460 return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
462 #elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
464 * HZ is larger than 1000, and HZ is a nice round multiple of 1000 -
465 * simply multiply with the factor between them.
467 * But first make sure the multiplication result cannot overflow:
469 static inline unsigned long _msecs_to_jiffies(const unsigned int m)
471 if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
472 return MAX_JIFFY_OFFSET;
473 return m * (HZ / MSEC_PER_SEC);
477 * Generic case - multiply, round and divide. But first check that if
478 * we are doing a net multiplication, that we wouldn't overflow:
480 static inline unsigned long _msecs_to_jiffies(const unsigned int m)
482 if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
483 return MAX_JIFFY_OFFSET;
485 return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32) >> MSEC_TO_HZ_SHR32;
489 * msecs_to_jiffies: - convert milliseconds to jiffies
490 * @m: time in milliseconds
492 * conversion is done as follows:
494 * - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)
496 * - 'too large' values [that would result in larger than
497 * MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
499 * - all other values are converted to jiffies by either multiplying
500 * the input value by a factor or dividing it with a factor and
501 * handling any 32-bit overflows.
502 * for the details see __msecs_to_jiffies()
504 * msecs_to_jiffies() checks for the passed in value being a constant
505 * via __builtin_constant_p() allowing gcc to eliminate most of the
506 * code. __msecs_to_jiffies() is called if the value passed does not
507 * allow constant folding and the actual conversion must be done at
509 * The HZ range specific helpers _msecs_to_jiffies() are called both
510 * directly here and from __msecs_to_jiffies() in the case where
511 * constant folding is not possible.
513 * Return: jiffies value
515 static __always_inline unsigned long msecs_to_jiffies(const unsigned int m)
517 if (__builtin_constant_p(m)) {
519 return MAX_JIFFY_OFFSET;
520 return _msecs_to_jiffies(m);
522 return __msecs_to_jiffies(m);
526 extern unsigned long __usecs_to_jiffies(const unsigned int u);
527 #if !(USEC_PER_SEC % HZ)
528 static inline unsigned long _usecs_to_jiffies(const unsigned int u)
530 return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
533 static inline unsigned long _usecs_to_jiffies(const unsigned int u)
535 return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
541 * usecs_to_jiffies: - convert microseconds to jiffies
542 * @u: time in microseconds
544 * conversion is done as follows:
546 * - 'too large' values [that would result in larger than
547 * MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
549 * - all other values are converted to jiffies by either multiplying
550 * the input value by a factor or dividing it with a factor and
551 * handling any 32-bit overflows as for msecs_to_jiffies.
553 * usecs_to_jiffies() checks for the passed in value being a constant
554 * via __builtin_constant_p() allowing gcc to eliminate most of the
555 * code. __usecs_to_jiffies() is called if the value passed does not
556 * allow constant folding and the actual conversion must be done at
558 * The HZ range specific helpers _usecs_to_jiffies() are called both
559 * directly here and from __msecs_to_jiffies() in the case where
560 * constant folding is not possible.
562 * Return: jiffies value
564 static __always_inline unsigned long usecs_to_jiffies(const unsigned int u)
566 if (__builtin_constant_p(u)) {
567 if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
568 return MAX_JIFFY_OFFSET;
569 return _usecs_to_jiffies(u);
571 return __usecs_to_jiffies(u);
575 extern unsigned long timespec64_to_jiffies(const struct timespec64 *value);
576 extern void jiffies_to_timespec64(const unsigned long jiffies,
577 struct timespec64 *value);
578 extern clock_t jiffies_to_clock_t(unsigned long x);
580 static inline clock_t jiffies_delta_to_clock_t(long delta)
582 return jiffies_to_clock_t(max(0L, delta));
585 static inline unsigned int jiffies_delta_to_msecs(long delta)
587 return jiffies_to_msecs(max(0L, delta));
590 extern unsigned long clock_t_to_jiffies(unsigned long x);
591 extern u64 jiffies_64_to_clock_t(u64 x);
592 extern u64 nsec_to_clock_t(u64 x);
593 extern u64 nsecs_to_jiffies64(u64 n);
594 extern unsigned long nsecs_to_jiffies(u64 n);
596 #define TIMESTAMP_SIZE 30