tools, bpftool: Remove two unused variables.
[linux-2.6-microblaze.git] / include / linux / ethtool.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * ethtool.h: Defines for Linux ethtool.
4  *
5  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6  * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7  * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9  *                                christopher.leech@intel.com,
10  *                                scott.feldman@intel.com)
11  * Portions Copyright (C) Sun Microsystems 2008
12  */
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
15
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
19
20 #ifdef CONFIG_COMPAT
21
22 struct compat_ethtool_rx_flow_spec {
23         u32             flow_type;
24         union ethtool_flow_union h_u;
25         struct ethtool_flow_ext h_ext;
26         union ethtool_flow_union m_u;
27         struct ethtool_flow_ext m_ext;
28         compat_u64      ring_cookie;
29         u32             location;
30 };
31
32 struct compat_ethtool_rxnfc {
33         u32                             cmd;
34         u32                             flow_type;
35         compat_u64                      data;
36         struct compat_ethtool_rx_flow_spec fs;
37         u32                             rule_cnt;
38         u32                             rule_locs[];
39 };
40
41 #endif /* CONFIG_COMPAT */
42
43 #include <linux/rculist.h>
44
45 /**
46  * enum ethtool_phys_id_state - indicator state for physical identification
47  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
50  *      is not supported)
51  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
52  *      is not supported)
53  */
54 enum ethtool_phys_id_state {
55         ETHTOOL_ID_INACTIVE,
56         ETHTOOL_ID_ACTIVE,
57         ETHTOOL_ID_ON,
58         ETHTOOL_ID_OFF
59 };
60
61 enum {
62         ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
63         ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
64         ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
65
66         /*
67          * Add your fresh new hash function bits above and remember to update
68          * rss_hash_func_strings[] in ethtool.c
69          */
70         ETH_RSS_HASH_FUNCS_COUNT
71 };
72
73 #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
74 #define __ETH_RSS_HASH(name)    __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
75
76 #define ETH_RSS_HASH_TOP        __ETH_RSS_HASH(TOP)
77 #define ETH_RSS_HASH_XOR        __ETH_RSS_HASH(XOR)
78 #define ETH_RSS_HASH_CRC32      __ETH_RSS_HASH(CRC32)
79
80 #define ETH_RSS_HASH_UNKNOWN    0
81 #define ETH_RSS_HASH_NO_CHANGE  0
82
83 struct net_device;
84
85 /* Some generic methods drivers may use in their ethtool_ops */
86 u32 ethtool_op_get_link(struct net_device *dev);
87 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
88
89
90 /**
91  * struct ethtool_link_ext_state_info - link extended state and substate.
92  */
93 struct ethtool_link_ext_state_info {
94         enum ethtool_link_ext_state link_ext_state;
95         union {
96                 enum ethtool_link_ext_substate_autoneg autoneg;
97                 enum ethtool_link_ext_substate_link_training link_training;
98                 enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch;
99                 enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity;
100                 enum ethtool_link_ext_substate_cable_issue cable_issue;
101                 u8 __link_ext_substate;
102         };
103 };
104
105 /**
106  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
107  * @index: Index in RX flow hash indirection table
108  * @n_rx_rings: Number of RX rings to use
109  *
110  * This function provides the default policy for RX flow hash indirection.
111  */
112 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
113 {
114         return index % n_rx_rings;
115 }
116
117 /* declare a link mode bitmap */
118 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)          \
119         DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
120
121 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
122  * fields, but they are allowed to overwrite them (will be ignored).
123  */
124 struct ethtool_link_ksettings {
125         struct ethtool_link_settings base;
126         struct {
127                 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
128                 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
129                 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
130         } link_modes;
131 };
132
133 /**
134  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
135  *   @ptr : pointer to struct ethtool_link_ksettings
136  *   @name : one of supported/advertising/lp_advertising
137  */
138 #define ethtool_link_ksettings_zero_link_mode(ptr, name)                \
139         bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
140
141 /**
142  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
143  * link mode mask
144  *   @ptr : pointer to struct ethtool_link_ksettings
145  *   @name : one of supported/advertising/lp_advertising
146  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
147  * (not atomic, no bound checking)
148  */
149 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)           \
150         __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
151
152 /**
153  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
154  * link mode mask
155  *   @ptr : pointer to struct ethtool_link_ksettings
156  *   @name : one of supported/advertising/lp_advertising
157  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
158  * (not atomic, no bound checking)
159  */
160 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)           \
161         __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
162
163 /**
164  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
165  *   @ptr : pointer to struct ethtool_link_ksettings
166  *   @name : one of supported/advertising/lp_advertising
167  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
168  * (not atomic, no bound checking)
169  *
170  * Returns true/false.
171  */
172 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)          \
173         test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
174
175 extern int
176 __ethtool_get_link_ksettings(struct net_device *dev,
177                              struct ethtool_link_ksettings *link_ksettings);
178
179 /**
180  * ethtool_intersect_link_masks - Given two link masks, AND them together
181  * @dst: first mask and where result is stored
182  * @src: second mask to intersect with
183  *
184  * Given two link mode masks, AND them together and save the result in dst.
185  */
186 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
187                                   struct ethtool_link_ksettings *src);
188
189 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
190                                              u32 legacy_u32);
191
192 /* return false if src had higher bits set. lower bits always updated. */
193 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
194                                      const unsigned long *src);
195
196 #define ETHTOOL_COALESCE_RX_USECS               BIT(0)
197 #define ETHTOOL_COALESCE_RX_MAX_FRAMES          BIT(1)
198 #define ETHTOOL_COALESCE_RX_USECS_IRQ           BIT(2)
199 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ      BIT(3)
200 #define ETHTOOL_COALESCE_TX_USECS               BIT(4)
201 #define ETHTOOL_COALESCE_TX_MAX_FRAMES          BIT(5)
202 #define ETHTOOL_COALESCE_TX_USECS_IRQ           BIT(6)
203 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ      BIT(7)
204 #define ETHTOOL_COALESCE_STATS_BLOCK_USECS      BIT(8)
205 #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX        BIT(9)
206 #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX        BIT(10)
207 #define ETHTOOL_COALESCE_PKT_RATE_LOW           BIT(11)
208 #define ETHTOOL_COALESCE_RX_USECS_LOW           BIT(12)
209 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW      BIT(13)
210 #define ETHTOOL_COALESCE_TX_USECS_LOW           BIT(14)
211 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW      BIT(15)
212 #define ETHTOOL_COALESCE_PKT_RATE_HIGH          BIT(16)
213 #define ETHTOOL_COALESCE_RX_USECS_HIGH          BIT(17)
214 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH     BIT(18)
215 #define ETHTOOL_COALESCE_TX_USECS_HIGH          BIT(19)
216 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH     BIT(20)
217 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL   BIT(21)
218
219 #define ETHTOOL_COALESCE_USECS                                          \
220         (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
221 #define ETHTOOL_COALESCE_MAX_FRAMES                                     \
222         (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
223 #define ETHTOOL_COALESCE_USECS_IRQ                                      \
224         (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
225 #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ         \
226         (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |   \
227          ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
228 #define ETHTOOL_COALESCE_USE_ADAPTIVE                                   \
229         (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
230 #define ETHTOOL_COALESCE_USECS_LOW_HIGH                                 \
231         (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
232          ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
233 #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH    \
234         (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW |   \
235          ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW |   \
236          ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH |  \
237          ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
238 #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS                              \
239         (ETHTOOL_COALESCE_USE_ADAPTIVE_RX |                             \
240          ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
241          ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
242          ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
243
244 #define ETHTOOL_STAT_NOT_SET    (~0ULL)
245
246 /**
247  * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames
248  * @tx_pause_frames: transmitted pause frame count. Reported to user space
249  *      as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES.
250  *
251  *      Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted`
252  *      from the standard.
253  *
254  * @rx_pause_frames: received pause frame count. Reported to user space
255  *      as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to:
256  *
257  *      Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived`
258  *      from the standard.
259  */
260 struct ethtool_pause_stats {
261         u64 tx_pause_frames;
262         u64 rx_pause_frames;
263 };
264
265 /**
266  * struct ethtool_ops - optional netdev operations
267  * @supported_coalesce_params: supported types of interrupt coalescing.
268  * @get_drvinfo: Report driver/device information.  Should only set the
269  *      @driver, @version, @fw_version and @bus_info fields.  If not
270  *      implemented, the @driver and @bus_info fields will be filled in
271  *      according to the netdev's parent device.
272  * @get_regs_len: Get buffer length required for @get_regs
273  * @get_regs: Get device registers
274  * @get_wol: Report whether Wake-on-Lan is enabled
275  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
276  *      or zero.
277  * @get_msglevel: Report driver message level.  This should be the value
278  *      of the @msg_enable field used by netif logging functions.
279  * @set_msglevel: Set driver message level
280  * @nway_reset: Restart autonegotiation.  Returns a negative error code
281  *      or zero.
282  * @get_link: Report whether physical link is up.  Will only be called if
283  *      the netdev is up.  Should usually be set to ethtool_op_get_link(),
284  *      which uses netif_carrier_ok().
285  * @get_link_ext_state: Report link extended state. Should set link_ext_state and
286  *      link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
287  *      do not attach ext_substate attribute to netlink message). If link_ext_state
288  *      and link_ext_substate are unknown, return -ENODATA. If not implemented,
289  *      link_ext_state and link_ext_substate will not be sent to userspace.
290  * @get_eeprom: Read data from the device EEPROM.
291  *      Should fill in the magic field.  Don't need to check len for zero
292  *      or wraparound.  Fill in the data argument with the eeprom values
293  *      from offset to offset + len.  Update len to the amount read.
294  *      Returns an error or zero.
295  * @set_eeprom: Write data to the device EEPROM.
296  *      Should validate the magic field.  Don't need to check len for zero
297  *      or wraparound.  Update len to the amount written.  Returns an error
298  *      or zero.
299  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
300  *      error code or zero.
301  * @set_coalesce: Set interrupt coalescing parameters.  Supported coalescing
302  *      types should be set in @supported_coalesce_params.
303  *      Returns a negative error code or zero.
304  * @get_ringparam: Report ring sizes
305  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
306  * @get_pause_stats: Report pause frame statistics. Drivers must not zero
307  *      statistics which they don't report. The stats structure is initialized
308  *      to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics.
309  * @get_pauseparam: Report pause parameters
310  * @set_pauseparam: Set pause parameters.  Returns a negative error code
311  *      or zero.
312  * @self_test: Run specified self-tests
313  * @get_strings: Return a set of strings that describe the requested objects
314  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
315  *      attached to it.  The implementation may update the indicator
316  *      asynchronously or synchronously, but in either case it must return
317  *      quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
318  *      and must either activate asynchronous updates and return zero, return
319  *      a negative error or return a positive frequency for synchronous
320  *      indication (e.g. 1 for one on/off cycle per second).  If it returns
321  *      a frequency then it will be called again at intervals with the
322  *      argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
323  *      the indicator accordingly.  Finally, it is called with the argument
324  *      %ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
325  *      negative error code or zero.
326  * @get_ethtool_stats: Return extended statistics about the device.
327  *      This is only useful if the device maintains statistics not
328  *      included in &struct rtnl_link_stats64.
329  * @begin: Function to be called before any other operation.  Returns a
330  *      negative error code or zero.
331  * @complete: Function to be called after any other operation except
332  *      @begin.  Will be called even if the other operation failed.
333  * @get_priv_flags: Report driver-specific feature flags.
334  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
335  *      error code or zero.
336  * @get_sset_count: Get number of strings that @get_strings will write.
337  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
338  *      error code or zero.
339  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
340  *      error code or zero.
341  * @flash_device: Write a firmware image to device's flash memory.
342  *      Returns a negative error code or zero.
343  * @reset: Reset (part of) the device, as specified by a bitmask of
344  *      flags from &enum ethtool_reset_flags.  Returns a negative
345  *      error code or zero.
346  * @get_rxfh_key_size: Get the size of the RX flow hash key.
347  *      Returns zero if not supported for this specific device.
348  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
349  *      Returns zero if not supported for this specific device.
350  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
351  *      and/or hash function.
352  *      Returns a negative error code or zero.
353  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
354  *      key, and/or hash function.  Arguments which are set to %NULL or zero
355  *      will remain unchanged.
356  *      Returns a negative error code or zero. An error code must be returned
357  *      if at least one unsupported change was requested.
358  * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
359  *      hash key, and/or hash function assiciated to the given rss context.
360  *      Returns a negative error code or zero.
361  * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
362  *      the contents of the RX flow hash indirection table, hash key, and/or
363  *      hash function associated to the given context. Arguments which are set
364  *      to %NULL or zero will remain unchanged.
365  *      Returns a negative error code or zero. An error code must be returned
366  *      if at least one unsupported change was requested.
367  * @get_channels: Get number of channels.
368  * @set_channels: Set number of channels.  Returns a negative error code or
369  *      zero.
370  * @get_dump_flag: Get dump flag indicating current dump length, version,
371  *                 and flag of the device.
372  * @get_dump_data: Get dump data.
373  * @set_dump: Set dump specific flags to the device.
374  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
375  *      Drivers supporting transmit time stamps in software should set this to
376  *      ethtool_op_get_ts_info().
377  * @get_module_info: Get the size and type of the eeprom contained within
378  *      a plug-in module.
379  * @get_module_eeprom: Get the eeprom information from the plug-in module
380  * @get_eee: Get Energy-Efficient (EEE) supported and status.
381  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
382  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
383  *      It must check that the given queue number is valid. If neither a RX nor
384  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
385  *      queue has this number, set the inapplicable fields to ~0 and return 0.
386  *      Returns a negative error code or zero.
387  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
388  *      It must check that the given queue number is valid. If neither a RX nor
389  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
390  *      queue has this number, ignore the inapplicable fields. Supported
391  *      coalescing types should be set in @supported_coalesce_params.
392  *      Returns a negative error code or zero.
393  * @get_link_ksettings: Get various device settings including Ethernet link
394  *      settings. The %cmd and %link_mode_masks_nwords fields should be
395  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
396  *      any change to them will be overwritten by kernel. Returns a negative
397  *      error code or zero.
398  * @set_link_ksettings: Set various device settings including Ethernet link
399  *      settings. The %cmd and %link_mode_masks_nwords fields should be
400  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
401  *      any change to them will be overwritten by kernel. Returns a negative
402  *      error code or zero.
403  * @get_fecparam: Get the network device Forward Error Correction parameters.
404  * @set_fecparam: Set the network device Forward Error Correction parameters.
405  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
406  *      This is only useful if the device maintains PHY statistics and
407  *      cannot use the standard PHY library helpers.
408  *
409  * All operations are optional (i.e. the function pointer may be set
410  * to %NULL) and callers must take this into account.  Callers must
411  * hold the RTNL lock.
412  *
413  * See the structures used by these operations for further documentation.
414  * Note that for all operations using a structure ending with a zero-
415  * length array, the array is allocated separately in the kernel and
416  * is passed to the driver as an additional parameter.
417  *
418  * See &struct net_device and &struct net_device_ops for documentation
419  * of the generic netdev features interface.
420  */
421 struct ethtool_ops {
422         u32     supported_coalesce_params;
423         void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
424         int     (*get_regs_len)(struct net_device *);
425         void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
426         void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
427         int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
428         u32     (*get_msglevel)(struct net_device *);
429         void    (*set_msglevel)(struct net_device *, u32);
430         int     (*nway_reset)(struct net_device *);
431         u32     (*get_link)(struct net_device *);
432         int     (*get_link_ext_state)(struct net_device *,
433                                       struct ethtool_link_ext_state_info *);
434         int     (*get_eeprom_len)(struct net_device *);
435         int     (*get_eeprom)(struct net_device *,
436                               struct ethtool_eeprom *, u8 *);
437         int     (*set_eeprom)(struct net_device *,
438                               struct ethtool_eeprom *, u8 *);
439         int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
440         int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
441         void    (*get_ringparam)(struct net_device *,
442                                  struct ethtool_ringparam *);
443         int     (*set_ringparam)(struct net_device *,
444                                  struct ethtool_ringparam *);
445         void    (*get_pause_stats)(struct net_device *dev,
446                                    struct ethtool_pause_stats *pause_stats);
447         void    (*get_pauseparam)(struct net_device *,
448                                   struct ethtool_pauseparam*);
449         int     (*set_pauseparam)(struct net_device *,
450                                   struct ethtool_pauseparam*);
451         void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
452         void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
453         int     (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
454         void    (*get_ethtool_stats)(struct net_device *,
455                                      struct ethtool_stats *, u64 *);
456         int     (*begin)(struct net_device *);
457         void    (*complete)(struct net_device *);
458         u32     (*get_priv_flags)(struct net_device *);
459         int     (*set_priv_flags)(struct net_device *, u32);
460         int     (*get_sset_count)(struct net_device *, int);
461         int     (*get_rxnfc)(struct net_device *,
462                              struct ethtool_rxnfc *, u32 *rule_locs);
463         int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
464         int     (*flash_device)(struct net_device *, struct ethtool_flash *);
465         int     (*reset)(struct net_device *, u32 *);
466         u32     (*get_rxfh_key_size)(struct net_device *);
467         u32     (*get_rxfh_indir_size)(struct net_device *);
468         int     (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
469                             u8 *hfunc);
470         int     (*set_rxfh)(struct net_device *, const u32 *indir,
471                             const u8 *key, const u8 hfunc);
472         int     (*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
473                                     u8 *hfunc, u32 rss_context);
474         int     (*set_rxfh_context)(struct net_device *, const u32 *indir,
475                                     const u8 *key, const u8 hfunc,
476                                     u32 *rss_context, bool delete);
477         void    (*get_channels)(struct net_device *, struct ethtool_channels *);
478         int     (*set_channels)(struct net_device *, struct ethtool_channels *);
479         int     (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
480         int     (*get_dump_data)(struct net_device *,
481                                  struct ethtool_dump *, void *);
482         int     (*set_dump)(struct net_device *, struct ethtool_dump *);
483         int     (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
484         int     (*get_module_info)(struct net_device *,
485                                    struct ethtool_modinfo *);
486         int     (*get_module_eeprom)(struct net_device *,
487                                      struct ethtool_eeprom *, u8 *);
488         int     (*get_eee)(struct net_device *, struct ethtool_eee *);
489         int     (*set_eee)(struct net_device *, struct ethtool_eee *);
490         int     (*get_tunable)(struct net_device *,
491                                const struct ethtool_tunable *, void *);
492         int     (*set_tunable)(struct net_device *,
493                                const struct ethtool_tunable *, const void *);
494         int     (*get_per_queue_coalesce)(struct net_device *, u32,
495                                           struct ethtool_coalesce *);
496         int     (*set_per_queue_coalesce)(struct net_device *, u32,
497                                           struct ethtool_coalesce *);
498         int     (*get_link_ksettings)(struct net_device *,
499                                       struct ethtool_link_ksettings *);
500         int     (*set_link_ksettings)(struct net_device *,
501                                       const struct ethtool_link_ksettings *);
502         int     (*get_fecparam)(struct net_device *,
503                                       struct ethtool_fecparam *);
504         int     (*set_fecparam)(struct net_device *,
505                                       struct ethtool_fecparam *);
506         void    (*get_ethtool_phy_stats)(struct net_device *,
507                                          struct ethtool_stats *, u64 *);
508         int     (*get_phy_tunable)(struct net_device *,
509                                    const struct ethtool_tunable *, void *);
510         int     (*set_phy_tunable)(struct net_device *,
511                                    const struct ethtool_tunable *, const void *);
512 };
513
514 int ethtool_check_ops(const struct ethtool_ops *ops);
515
516 struct ethtool_rx_flow_rule {
517         struct flow_rule        *rule;
518         unsigned long           priv[];
519 };
520
521 struct ethtool_rx_flow_spec_input {
522         const struct ethtool_rx_flow_spec       *fs;
523         u32                                     rss_ctx;
524 };
525
526 struct ethtool_rx_flow_rule *
527 ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
528 void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
529
530 bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd);
531 int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
532                                        const struct ethtool_link_ksettings *cmd,
533                                        u32 *dev_speed, u8 *dev_duplex);
534
535 struct netlink_ext_ack;
536 struct phy_device;
537 struct phy_tdr_config;
538
539 /**
540  * struct ethtool_phy_ops - Optional PHY device options
541  * @get_sset_count: Get number of strings that @get_strings will write.
542  * @get_strings: Return a set of strings that describe the requested objects
543  * @get_stats: Return extended statistics about the PHY device.
544  * @start_cable_test - Start a cable test
545  * @start_cable_test_tdr - Start a Time Domain Reflectometry cable test
546  *
547  * All operations are optional (i.e. the function pointer may be set to %NULL)
548  * and callers must take this into account. Callers must hold the RTNL lock.
549  */
550 struct ethtool_phy_ops {
551         int (*get_sset_count)(struct phy_device *dev);
552         int (*get_strings)(struct phy_device *dev, u8 *data);
553         int (*get_stats)(struct phy_device *dev,
554                          struct ethtool_stats *stats, u64 *data);
555         int (*start_cable_test)(struct phy_device *phydev,
556                                 struct netlink_ext_ack *extack);
557         int (*start_cable_test_tdr)(struct phy_device *phydev,
558                                     struct netlink_ext_ack *extack,
559                                     const struct phy_tdr_config *config);
560 };
561
562 /**
563  * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton
564  * @ops: Ethtool PHY operations to set
565  */
566 void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops);
567
568 #endif /* _LINUX_ETHTOOL_H */