2 * Helper macros to support writing architecture specific
5 * A minimal linker scripts has following content:
6 * [This is a sample, architectures may have special requiriements]
16 * INIT_TEXT_SECTION(PAGE_SIZE)
17 * INIT_DATA_SECTION(...)
18 * PERCPU_SECTION(CACHELINE_SIZE)
26 * RO_DATA_SECTION(PAGE_SIZE)
27 * RW_DATA_SECTION(...)
30 * EXCEPTION_TABLE(...)
33 * BSS_SECTION(0, 0, 0)
39 * DISCARDS // must be the last
42 * [__init_begin, __init_end] is the init section that may be freed after init
43 * // __init_begin and __init_end should be page aligned, so that we can
44 * // free the whole .init memory
45 * [_stext, _etext] is the text section
46 * [_sdata, _edata] is the data section
48 * Some of the included output section have their own set of constants.
49 * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
50 * [__nosave_begin, __nosave_end] for the nosave data
57 /* Align . to a 8 byte boundary equals to maximum function alignment. */
58 #define ALIGN_FUNCTION() . = ALIGN(8)
61 * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which
62 * generates .data.identifier sections, which need to be pulled in with
63 * .data. We don't want to pull in .data..other sections, which Linux
64 * has defined. Same for text and bss.
66 * RODATA_MAIN is not used because existing code already defines .rodata.x
67 * sections to be brought in with rodata.
69 #ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
70 #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
71 #define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*
72 #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
73 #define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*
74 #define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*
75 #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
77 #define TEXT_MAIN .text
78 #define DATA_MAIN .data
79 #define SDATA_MAIN .sdata
80 #define RODATA_MAIN .rodata
82 #define SBSS_MAIN .sbss
86 * Align to a 32 byte boundary equal to the
87 * alignment gcc 4.5 uses for a struct
89 #define STRUCT_ALIGNMENT 32
90 #define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
92 /* The actual configuration determine if the init/exit sections
93 * are handled as text/data or they can be discarded (which
94 * often happens at runtime)
96 #ifdef CONFIG_HOTPLUG_CPU
97 #define CPU_KEEP(sec) *(.cpu##sec)
98 #define CPU_DISCARD(sec)
100 #define CPU_KEEP(sec)
101 #define CPU_DISCARD(sec) *(.cpu##sec)
104 #if defined(CONFIG_MEMORY_HOTPLUG)
105 #define MEM_KEEP(sec) *(.mem##sec)
106 #define MEM_DISCARD(sec)
108 #define MEM_KEEP(sec)
109 #define MEM_DISCARD(sec) *(.mem##sec)
112 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
113 #define MCOUNT_REC() . = ALIGN(8); \
114 __start_mcount_loc = .; \
115 KEEP(*(__mcount_loc)) \
116 __stop_mcount_loc = .;
121 #ifdef CONFIG_TRACE_BRANCH_PROFILING
122 #define LIKELY_PROFILE() __start_annotated_branch_profile = .; \
123 KEEP(*(_ftrace_annotated_branch)) \
124 __stop_annotated_branch_profile = .;
126 #define LIKELY_PROFILE()
129 #ifdef CONFIG_PROFILE_ALL_BRANCHES
130 #define BRANCH_PROFILE() __start_branch_profile = .; \
131 KEEP(*(_ftrace_branch)) \
132 __stop_branch_profile = .;
134 #define BRANCH_PROFILE()
137 #ifdef CONFIG_KPROBES
138 #define KPROBE_BLACKLIST() . = ALIGN(8); \
139 __start_kprobe_blacklist = .; \
140 KEEP(*(_kprobe_blacklist)) \
141 __stop_kprobe_blacklist = .;
143 #define KPROBE_BLACKLIST()
146 #ifdef CONFIG_FUNCTION_ERROR_INJECTION
147 #define ERROR_INJECT_WHITELIST() STRUCT_ALIGN(); \
148 __start_error_injection_whitelist = .; \
149 KEEP(*(_error_injection_whitelist)) \
150 __stop_error_injection_whitelist = .;
152 #define ERROR_INJECT_WHITELIST()
155 #ifdef CONFIG_EVENT_TRACING
156 #define FTRACE_EVENTS() . = ALIGN(8); \
157 __start_ftrace_events = .; \
158 KEEP(*(_ftrace_events)) \
159 __stop_ftrace_events = .; \
160 __start_ftrace_eval_maps = .; \
161 KEEP(*(_ftrace_eval_map)) \
162 __stop_ftrace_eval_maps = .;
164 #define FTRACE_EVENTS()
167 #ifdef CONFIG_TRACING
168 #define TRACE_PRINTKS() __start___trace_bprintk_fmt = .; \
169 KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
170 __stop___trace_bprintk_fmt = .;
171 #define TRACEPOINT_STR() __start___tracepoint_str = .; \
172 KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \
173 __stop___tracepoint_str = .;
175 #define TRACE_PRINTKS()
176 #define TRACEPOINT_STR()
179 #ifdef CONFIG_FTRACE_SYSCALLS
180 #define TRACE_SYSCALLS() . = ALIGN(8); \
181 __start_syscalls_metadata = .; \
182 KEEP(*(__syscalls_metadata)) \
183 __stop_syscalls_metadata = .;
185 #define TRACE_SYSCALLS()
188 #ifdef CONFIG_BPF_EVENTS
189 #define BPF_RAW_TP() STRUCT_ALIGN(); \
190 __start__bpf_raw_tp = .; \
191 KEEP(*(__bpf_raw_tp_map)) \
192 __stop__bpf_raw_tp = .;
197 #ifdef CONFIG_SERIAL_EARLYCON
198 #define EARLYCON_TABLE() . = ALIGN(8); \
199 __earlycon_table = .; \
200 KEEP(*(__earlycon_table)) \
201 __earlycon_table_end = .;
203 #define EARLYCON_TABLE()
206 #ifdef CONFIG_SECURITY
207 #define LSM_TABLE() . = ALIGN(8); \
208 __start_lsm_info = .; \
209 KEEP(*(.lsm_info.init)) \
215 #define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name)
216 #define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name)
217 #define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name)
218 #define _OF_TABLE_0(name)
219 #define _OF_TABLE_1(name) \
221 __##name##_of_table = .; \
222 KEEP(*(__##name##_of_table)) \
223 KEEP(*(__##name##_of_table_end))
225 #define TIMER_OF_TABLES() OF_TABLE(CONFIG_TIMER_OF, timer)
226 #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
227 #define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk)
228 #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
229 #define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method)
230 #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
233 #define ACPI_PROBE_TABLE(name) \
235 __##name##_acpi_probe_table = .; \
236 KEEP(*(__##name##_acpi_probe_table)) \
237 __##name##_acpi_probe_table_end = .;
239 #define ACPI_PROBE_TABLE(name)
242 #define KERNEL_DTB() \
245 KEEP(*(.dtb.init.rodata)) \
255 *(.data..shared_aligned) /* percpu related */ \
256 MEM_KEEP(init.data*) \
257 MEM_KEEP(exit.data*) \
264 /* implement dynamic printk debug */ \
266 __start___verbose = .; \
268 __stop___verbose = .; \
276 * Data section helpers
278 #define NOSAVE_DATA \
279 . = ALIGN(PAGE_SIZE); \
280 __nosave_begin = .; \
282 . = ALIGN(PAGE_SIZE); \
285 #define PAGE_ALIGNED_DATA(page_align) \
286 . = ALIGN(page_align); \
287 *(.data..page_aligned)
289 #define READ_MOSTLY_DATA(align) \
291 *(.data..read_mostly) \
294 #define CACHELINE_ALIGNED_DATA(align) \
296 *(.data..cacheline_aligned)
298 #define INIT_TASK_DATA(align) \
300 __start_init_task = .; \
301 init_thread_union = .; \
303 KEEP(*(.data..init_task)) \
304 KEEP(*(.data..init_thread_info)) \
305 . = __start_init_task + THREAD_SIZE; \
308 #define JUMP_TABLE_DATA \
310 __start___jump_table = .; \
311 KEEP(*(__jump_table)) \
312 __stop___jump_table = .;
315 * Allow architectures to handle ro_after_init data on their
316 * own by defining an empty RO_AFTER_INIT_DATA.
318 #ifndef RO_AFTER_INIT_DATA
319 #define RO_AFTER_INIT_DATA \
320 __start_ro_after_init = .; \
321 *(.data..ro_after_init) \
323 __end_ro_after_init = .;
329 #define RO_DATA_SECTION(align) \
330 . = ALIGN((align)); \
331 .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
332 __start_rodata = .; \
333 *(.rodata) *(.rodata.*) \
334 RO_AFTER_INIT_DATA /* Read only after init */ \
335 KEEP(*(__vermagic)) /* Kernel version magic */ \
337 __start___tracepoints_ptrs = .; \
338 KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
339 __stop___tracepoints_ptrs = .; \
340 *(__tracepoints_strings)/* Tracepoints: strings */ \
343 .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
348 .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
349 __start_pci_fixups_early = .; \
350 KEEP(*(.pci_fixup_early)) \
351 __end_pci_fixups_early = .; \
352 __start_pci_fixups_header = .; \
353 KEEP(*(.pci_fixup_header)) \
354 __end_pci_fixups_header = .; \
355 __start_pci_fixups_final = .; \
356 KEEP(*(.pci_fixup_final)) \
357 __end_pci_fixups_final = .; \
358 __start_pci_fixups_enable = .; \
359 KEEP(*(.pci_fixup_enable)) \
360 __end_pci_fixups_enable = .; \
361 __start_pci_fixups_resume = .; \
362 KEEP(*(.pci_fixup_resume)) \
363 __end_pci_fixups_resume = .; \
364 __start_pci_fixups_resume_early = .; \
365 KEEP(*(.pci_fixup_resume_early)) \
366 __end_pci_fixups_resume_early = .; \
367 __start_pci_fixups_suspend = .; \
368 KEEP(*(.pci_fixup_suspend)) \
369 __end_pci_fixups_suspend = .; \
370 __start_pci_fixups_suspend_late = .; \
371 KEEP(*(.pci_fixup_suspend_late)) \
372 __end_pci_fixups_suspend_late = .; \
375 /* Built-in firmware blobs */ \
376 .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
377 __start_builtin_fw = .; \
378 KEEP(*(.builtin_fw)) \
379 __end_builtin_fw = .; \
384 /* Kernel symbol table: Normal symbols */ \
385 __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
386 __start___ksymtab = .; \
387 KEEP(*(SORT(___ksymtab+*))) \
388 __stop___ksymtab = .; \
391 /* Kernel symbol table: GPL-only symbols */ \
392 __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
393 __start___ksymtab_gpl = .; \
394 KEEP(*(SORT(___ksymtab_gpl+*))) \
395 __stop___ksymtab_gpl = .; \
398 /* Kernel symbol table: Normal unused symbols */ \
399 __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
400 __start___ksymtab_unused = .; \
401 KEEP(*(SORT(___ksymtab_unused+*))) \
402 __stop___ksymtab_unused = .; \
405 /* Kernel symbol table: GPL-only unused symbols */ \
406 __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
407 __start___ksymtab_unused_gpl = .; \
408 KEEP(*(SORT(___ksymtab_unused_gpl+*))) \
409 __stop___ksymtab_unused_gpl = .; \
412 /* Kernel symbol table: GPL-future-only symbols */ \
413 __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
414 __start___ksymtab_gpl_future = .; \
415 KEEP(*(SORT(___ksymtab_gpl_future+*))) \
416 __stop___ksymtab_gpl_future = .; \
419 /* Kernel symbol table: Normal symbols */ \
420 __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
421 __start___kcrctab = .; \
422 KEEP(*(SORT(___kcrctab+*))) \
423 __stop___kcrctab = .; \
426 /* Kernel symbol table: GPL-only symbols */ \
427 __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
428 __start___kcrctab_gpl = .; \
429 KEEP(*(SORT(___kcrctab_gpl+*))) \
430 __stop___kcrctab_gpl = .; \
433 /* Kernel symbol table: Normal unused symbols */ \
434 __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
435 __start___kcrctab_unused = .; \
436 KEEP(*(SORT(___kcrctab_unused+*))) \
437 __stop___kcrctab_unused = .; \
440 /* Kernel symbol table: GPL-only unused symbols */ \
441 __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
442 __start___kcrctab_unused_gpl = .; \
443 KEEP(*(SORT(___kcrctab_unused_gpl+*))) \
444 __stop___kcrctab_unused_gpl = .; \
447 /* Kernel symbol table: GPL-future-only symbols */ \
448 __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
449 __start___kcrctab_gpl_future = .; \
450 KEEP(*(SORT(___kcrctab_gpl_future+*))) \
451 __stop___kcrctab_gpl_future = .; \
454 /* Kernel symbol table: strings */ \
455 __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
456 *(__ksymtab_strings) \
459 /* __*init sections */ \
460 __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
462 MEM_KEEP(init.rodata) \
463 MEM_KEEP(exit.rodata) \
466 /* Built-in module parameters. */ \
467 __param : AT(ADDR(__param) - LOAD_OFFSET) { \
468 __start___param = .; \
470 __stop___param = .; \
473 /* Built-in module versions. */ \
474 __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \
475 __start___modver = .; \
477 __stop___modver = .; \
478 . = ALIGN((align)); \
483 /* RODATA & RO_DATA provided for backward compatibility.
484 * All archs are supposed to use RO_DATA() */
485 #define RODATA RO_DATA_SECTION(4096)
486 #define RO_DATA(align) RO_DATA_SECTION(align)
489 * .text section. Map to function alignment to avoid address changes
490 * during second ld run in second ld pass when generating System.map
492 * TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
493 * code elimination is enabled, so these sections should be converted
498 *(.text.hot TEXT_MAIN .text.fixup .text.unlikely) \
501 MEM_KEEP(init.text*) \
502 MEM_KEEP(exit.text*) \
505 /* sched.text is aling to function alignment to secure we have same
506 * address even at second ld pass when generating System.map */
509 __sched_text_start = .; \
511 __sched_text_end = .;
513 /* spinlock.text is aling to function alignment to secure we have same
514 * address even at second ld pass when generating System.map */
517 __lock_text_start = .; \
521 #define CPUIDLE_TEXT \
523 __cpuidle_text_start = .; \
525 __cpuidle_text_end = .;
527 #define KPROBES_TEXT \
529 __kprobes_text_start = .; \
531 __kprobes_text_end = .;
535 __entry_text_start = .; \
537 __entry_text_end = .;
539 #define IRQENTRY_TEXT \
541 __irqentry_text_start = .; \
543 __irqentry_text_end = .;
545 #define SOFTIRQENTRY_TEXT \
547 __softirqentry_text_start = .; \
548 *(.softirqentry.text) \
549 __softirqentry_text_end = .;
551 /* Section used for early init (in .S files) */
552 #define HEAD_TEXT KEEP(*(.head.text))
554 #define HEAD_TEXT_SECTION \
555 .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \
562 #define EXCEPTION_TABLE(align) \
564 __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
565 __start___ex_table = .; \
566 KEEP(*(__ex_table)) \
567 __stop___ex_table = .; \
573 #define INIT_TASK_DATA_SECTION(align) \
575 .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
576 INIT_TASK_DATA(align) \
579 #ifdef CONFIG_CONSTRUCTORS
580 #define KERNEL_CTORS() . = ALIGN(8); \
583 KEEP(*(SORT(.init_array.*))) \
584 KEEP(*(.init_array)) \
587 #define KERNEL_CTORS()
590 /* init and exit section handling */
592 KEEP(*(SORT(___kentry+*))) \
593 *(.init.data init.data.*) \
594 MEM_DISCARD(init.data*) \
597 *(.init.rodata .init.rodata.*) \
601 ERROR_INJECT_WHITELIST() \
602 MEM_DISCARD(init.rodata) \
604 RESERVEDMEM_OF_TABLES() \
606 CPU_METHOD_OF_TABLES() \
607 CPUIDLE_METHOD_OF_TABLES() \
609 IRQCHIP_OF_MATCH_TABLE() \
610 ACPI_PROBE_TABLE(irqchip) \
611 ACPI_PROBE_TABLE(timer) \
616 *(.init.text .init.text.*) \
618 MEM_DISCARD(init.text*)
621 *(.exit.data .exit.data.*) \
622 *(.fini_array .fini_array.*) \
624 MEM_DISCARD(exit.data*) \
625 MEM_DISCARD(exit.rodata*)
630 MEM_DISCARD(exit.text)
636 * bss (Block Started by Symbol) - uninitialized data
637 * zeroed during startup
639 #define SBSS(sbss_align) \
640 . = ALIGN(sbss_align); \
641 .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
648 * Allow archectures to redefine BSS_FIRST_SECTIONS to add extra
649 * sections to the front of bss.
651 #ifndef BSS_FIRST_SECTIONS
652 #define BSS_FIRST_SECTIONS
655 #define BSS(bss_align) \
656 . = ALIGN(bss_align); \
657 .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
659 *(.bss..page_aligned) \
666 * DWARF debug sections.
667 * Symbols in the DWARF debugging sections are relative to
668 * the beginning of the section so we begin them at 0.
670 #define DWARF_DEBUG \
672 .debug 0 : { *(.debug) } \
673 .line 0 : { *(.line) } \
674 /* GNU DWARF 1 extensions */ \
675 .debug_srcinfo 0 : { *(.debug_srcinfo) } \
676 .debug_sfnames 0 : { *(.debug_sfnames) } \
677 /* DWARF 1.1 and DWARF 2 */ \
678 .debug_aranges 0 : { *(.debug_aranges) } \
679 .debug_pubnames 0 : { *(.debug_pubnames) } \
681 .debug_info 0 : { *(.debug_info \
682 .gnu.linkonce.wi.*) } \
683 .debug_abbrev 0 : { *(.debug_abbrev) } \
684 .debug_line 0 : { *(.debug_line) } \
685 .debug_frame 0 : { *(.debug_frame) } \
686 .debug_str 0 : { *(.debug_str) } \
687 .debug_loc 0 : { *(.debug_loc) } \
688 .debug_macinfo 0 : { *(.debug_macinfo) } \
689 .debug_pubtypes 0 : { *(.debug_pubtypes) } \
691 .debug_ranges 0 : { *(.debug_ranges) } \
692 /* SGI/MIPS DWARF 2 extensions */ \
693 .debug_weaknames 0 : { *(.debug_weaknames) } \
694 .debug_funcnames 0 : { *(.debug_funcnames) } \
695 .debug_typenames 0 : { *(.debug_typenames) } \
696 .debug_varnames 0 : { *(.debug_varnames) } \
697 /* GNU DWARF 2 extensions */ \
698 .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) } \
699 .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) } \
701 .debug_types 0 : { *(.debug_types) } \
703 .debug_macro 0 : { *(.debug_macro) } \
704 .debug_addr 0 : { *(.debug_addr) }
706 /* Stabs debugging sections. */
707 #define STABS_DEBUG \
708 .stab 0 : { *(.stab) } \
709 .stabstr 0 : { *(.stabstr) } \
710 .stab.excl 0 : { *(.stab.excl) } \
711 .stab.exclstr 0 : { *(.stab.exclstr) } \
712 .stab.index 0 : { *(.stab.index) } \
713 .stab.indexstr 0 : { *(.stab.indexstr) } \
714 .comment 0 : { *(.comment) }
716 #ifdef CONFIG_GENERIC_BUG
719 __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
720 __start___bug_table = .; \
721 KEEP(*(__bug_table)) \
722 __stop___bug_table = .; \
728 #ifdef CONFIG_UNWINDER_ORC
729 #define ORC_UNWIND_TABLE \
731 .orc_unwind_ip : AT(ADDR(.orc_unwind_ip) - LOAD_OFFSET) { \
732 __start_orc_unwind_ip = .; \
733 KEEP(*(.orc_unwind_ip)) \
734 __stop_orc_unwind_ip = .; \
737 .orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) { \
738 __start_orc_unwind = .; \
739 KEEP(*(.orc_unwind)) \
740 __stop_orc_unwind = .; \
743 .orc_lookup : AT(ADDR(.orc_lookup) - LOAD_OFFSET) { \
745 . += (((SIZEOF(.text) + LOOKUP_BLOCK_SIZE - 1) / \
746 LOOKUP_BLOCK_SIZE) + 1) * 4; \
747 orc_lookup_end = .; \
750 #define ORC_UNWIND_TABLE
753 #ifdef CONFIG_PM_TRACE
756 .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
757 __tracedata_start = .; \
758 KEEP(*(.tracedata)) \
759 __tracedata_end = .; \
766 .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
772 #define INIT_SETUP(initsetup_align) \
773 . = ALIGN(initsetup_align); \
775 KEEP(*(.init.setup)) \
778 #define INIT_CALLS_LEVEL(level) \
779 __initcall##level##_start = .; \
780 KEEP(*(.initcall##level##.init)) \
781 KEEP(*(.initcall##level##s.init)) \
784 __initcall_start = .; \
785 KEEP(*(.initcallearly.init)) \
786 INIT_CALLS_LEVEL(0) \
787 INIT_CALLS_LEVEL(1) \
788 INIT_CALLS_LEVEL(2) \
789 INIT_CALLS_LEVEL(3) \
790 INIT_CALLS_LEVEL(4) \
791 INIT_CALLS_LEVEL(5) \
792 INIT_CALLS_LEVEL(rootfs) \
793 INIT_CALLS_LEVEL(6) \
794 INIT_CALLS_LEVEL(7) \
797 #define CON_INITCALL \
798 __con_initcall_start = .; \
799 KEEP(*(.con_initcall.init)) \
800 __con_initcall_end = .;
802 #ifdef CONFIG_BLK_DEV_INITRD
803 #define INIT_RAM_FS \
805 __initramfs_start = .; \
806 KEEP(*(.init.ramfs)) \
808 KEEP(*(.init.ramfs.info))
814 * Memory encryption operates on a page basis. Since we need to clear
815 * the memory encryption mask for this section, it needs to be aligned
816 * on a page boundary and be a page-size multiple in length.
818 * Note: We use a separate section so that only this section gets
819 * decrypted to avoid exposing more than we wish.
821 #ifdef CONFIG_AMD_MEM_ENCRYPT
822 #define PERCPU_DECRYPTED_SECTION \
823 . = ALIGN(PAGE_SIZE); \
824 *(.data..percpu..decrypted) \
825 . = ALIGN(PAGE_SIZE);
827 #define PERCPU_DECRYPTED_SECTION
832 * Default discarded sections.
834 * Some archs want to discard exit text/data at runtime rather than
835 * link time due to cross-section references such as alt instructions,
836 * bug table, eh_frame, etc. DISCARDS must be the last of output
837 * section definitions so that such archs put those in earlier section
850 * PERCPU_INPUT - the percpu input sections
851 * @cacheline: cacheline size
853 * The core percpu section names and core symbols which do not rely
854 * directly upon load addresses.
856 * @cacheline is used to align subsections to avoid false cacheline
857 * sharing between subsections for different purposes.
859 #define PERCPU_INPUT(cacheline) \
860 __per_cpu_start = .; \
861 *(.data..percpu..first) \
862 . = ALIGN(PAGE_SIZE); \
863 *(.data..percpu..page_aligned) \
864 . = ALIGN(cacheline); \
865 *(.data..percpu..read_mostly) \
866 . = ALIGN(cacheline); \
868 *(.data..percpu..shared_aligned) \
869 PERCPU_DECRYPTED_SECTION \
873 * PERCPU_VADDR - define output section for percpu area
874 * @cacheline: cacheline size
875 * @vaddr: explicit base address (optional)
876 * @phdr: destination PHDR (optional)
878 * Macro which expands to output section for percpu area.
880 * @cacheline is used to align subsections to avoid false cacheline
881 * sharing between subsections for different purposes.
883 * If @vaddr is not blank, it specifies explicit base address and all
884 * percpu symbols will be offset from the given address. If blank,
885 * @vaddr always equals @laddr + LOAD_OFFSET.
887 * @phdr defines the output PHDR to use if not blank. Be warned that
888 * output PHDR is sticky. If @phdr is specified, the next output
889 * section in the linker script will go there too. @phdr should have
892 * Note that this macros defines __per_cpu_load as an absolute symbol.
893 * If there is no need to put the percpu section at a predetermined
894 * address, use PERCPU_SECTION.
896 #define PERCPU_VADDR(cacheline, vaddr, phdr) \
897 __per_cpu_load = .; \
898 .data..percpu vaddr : AT(__per_cpu_load - LOAD_OFFSET) { \
899 PERCPU_INPUT(cacheline) \
901 . = __per_cpu_load + SIZEOF(.data..percpu);
904 * PERCPU_SECTION - define output section for percpu area, simple version
905 * @cacheline: cacheline size
907 * Align to PAGE_SIZE and outputs output section for percpu area. This
908 * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
909 * __per_cpu_start will be identical.
911 * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
912 * except that __per_cpu_load is defined as a relative symbol against
913 * .data..percpu which is required for relocatable x86_32 configuration.
915 #define PERCPU_SECTION(cacheline) \
916 . = ALIGN(PAGE_SIZE); \
917 .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \
918 __per_cpu_load = .; \
919 PERCPU_INPUT(cacheline) \
924 * Definition of the high level *_SECTION macros
925 * They will fit only a subset of the architectures
931 * All sections are combined in a single .data section.
932 * The sections following CONSTRUCTORS are arranged so their
933 * typical alignment matches.
934 * A cacheline is typical/always less than a PAGE_SIZE so
935 * the sections that has this restriction (or similar)
936 * is located before the ones requiring PAGE_SIZE alignment.
937 * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
938 * matches the requirement of PAGE_ALIGNED_DATA.
940 * use 0 as page_align if page_aligned data is not used */
941 #define RW_DATA_SECTION(cacheline, pagealigned, inittask) \
942 . = ALIGN(PAGE_SIZE); \
943 .data : AT(ADDR(.data) - LOAD_OFFSET) { \
944 INIT_TASK_DATA(inittask) \
946 PAGE_ALIGNED_DATA(pagealigned) \
947 CACHELINE_ALIGNED_DATA(cacheline) \
948 READ_MOSTLY_DATA(cacheline) \
954 #define INIT_TEXT_SECTION(inittext_align) \
955 . = ALIGN(inittext_align); \
956 .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \
962 #define INIT_DATA_SECTION(initsetup_align) \
963 .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \
965 INIT_SETUP(initsetup_align) \
971 #define BSS_SECTION(sbss_align, bss_align, stop_align) \
972 . = ALIGN(sbss_align); \
976 . = ALIGN(stop_align); \