Merge tag 'kconfig-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy...
[linux-2.6-microblaze.git] / include / asm-generic / tlb.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /* include/asm-generic/tlb.h
3  *
4  *      Generic TLB shootdown code
5  *
6  * Copyright 2001 Red Hat, Inc.
7  * Based on code from mm/memory.c Copyright Linus Torvalds and others.
8  *
9  * Copyright 2011 Red Hat, Inc., Peter Zijlstra
10  */
11 #ifndef _ASM_GENERIC__TLB_H
12 #define _ASM_GENERIC__TLB_H
13
14 #include <linux/mmu_notifier.h>
15 #include <linux/swap.h>
16 #include <linux/hugetlb_inline.h>
17 #include <asm/tlbflush.h>
18 #include <asm/cacheflush.h>
19
20 /*
21  * Blindly accessing user memory from NMI context can be dangerous
22  * if we're in the middle of switching the current user task or switching
23  * the loaded mm.
24  */
25 #ifndef nmi_uaccess_okay
26 # define nmi_uaccess_okay() true
27 #endif
28
29 #ifdef CONFIG_MMU
30
31 /*
32  * Generic MMU-gather implementation.
33  *
34  * The mmu_gather data structure is used by the mm code to implement the
35  * correct and efficient ordering of freeing pages and TLB invalidations.
36  *
37  * This correct ordering is:
38  *
39  *  1) unhook page
40  *  2) TLB invalidate page
41  *  3) free page
42  *
43  * That is, we must never free a page before we have ensured there are no live
44  * translations left to it. Otherwise it might be possible to observe (or
45  * worse, change) the page content after it has been reused.
46  *
47  * The mmu_gather API consists of:
48  *
49  *  - tlb_gather_mmu() / tlb_finish_mmu(); start and finish a mmu_gather
50  *
51  *    Finish in particular will issue a (final) TLB invalidate and free
52  *    all (remaining) queued pages.
53  *
54  *  - tlb_start_vma() / tlb_end_vma(); marks the start / end of a VMA
55  *
56  *    Defaults to flushing at tlb_end_vma() to reset the range; helps when
57  *    there's large holes between the VMAs.
58  *
59  *  - tlb_remove_table()
60  *
61  *    tlb_remove_table() is the basic primitive to free page-table directories
62  *    (__p*_free_tlb()).  In it's most primitive form it is an alias for
63  *    tlb_remove_page() below, for when page directories are pages and have no
64  *    additional constraints.
65  *
66  *    See also MMU_GATHER_TABLE_FREE and MMU_GATHER_RCU_TABLE_FREE.
67  *
68  *  - tlb_remove_page() / __tlb_remove_page()
69  *  - tlb_remove_page_size() / __tlb_remove_page_size()
70  *
71  *    __tlb_remove_page_size() is the basic primitive that queues a page for
72  *    freeing. __tlb_remove_page() assumes PAGE_SIZE. Both will return a
73  *    boolean indicating if the queue is (now) full and a call to
74  *    tlb_flush_mmu() is required.
75  *
76  *    tlb_remove_page() and tlb_remove_page_size() imply the call to
77  *    tlb_flush_mmu() when required and has no return value.
78  *
79  *  - tlb_change_page_size()
80  *
81  *    call before __tlb_remove_page*() to set the current page-size; implies a
82  *    possible tlb_flush_mmu() call.
83  *
84  *  - tlb_flush_mmu() / tlb_flush_mmu_tlbonly()
85  *
86  *    tlb_flush_mmu_tlbonly() - does the TLB invalidate (and resets
87  *                              related state, like the range)
88  *
89  *    tlb_flush_mmu() - in addition to the above TLB invalidate, also frees
90  *                      whatever pages are still batched.
91  *
92  *  - mmu_gather::fullmm
93  *
94  *    A flag set by tlb_gather_mmu() to indicate we're going to free
95  *    the entire mm; this allows a number of optimizations.
96  *
97  *    - We can ignore tlb_{start,end}_vma(); because we don't
98  *      care about ranges. Everything will be shot down.
99  *
100  *    - (RISC) architectures that use ASIDs can cycle to a new ASID
101  *      and delay the invalidation until ASID space runs out.
102  *
103  *  - mmu_gather::need_flush_all
104  *
105  *    A flag that can be set by the arch code if it wants to force
106  *    flush the entire TLB irrespective of the range. For instance
107  *    x86-PAE needs this when changing top-level entries.
108  *
109  * And allows the architecture to provide and implement tlb_flush():
110  *
111  * tlb_flush() may, in addition to the above mentioned mmu_gather fields, make
112  * use of:
113  *
114  *  - mmu_gather::start / mmu_gather::end
115  *
116  *    which provides the range that needs to be flushed to cover the pages to
117  *    be freed.
118  *
119  *  - mmu_gather::freed_tables
120  *
121  *    set when we freed page table pages
122  *
123  *  - tlb_get_unmap_shift() / tlb_get_unmap_size()
124  *
125  *    returns the smallest TLB entry size unmapped in this range.
126  *
127  * If an architecture does not provide tlb_flush() a default implementation
128  * based on flush_tlb_range() will be used, unless MMU_GATHER_NO_RANGE is
129  * specified, in which case we'll default to flush_tlb_mm().
130  *
131  * Additionally there are a few opt-in features:
132  *
133  *  MMU_GATHER_PAGE_SIZE
134  *
135  *  This ensures we call tlb_flush() every time tlb_change_page_size() actually
136  *  changes the size and provides mmu_gather::page_size to tlb_flush().
137  *
138  *  This might be useful if your architecture has size specific TLB
139  *  invalidation instructions.
140  *
141  *  MMU_GATHER_TABLE_FREE
142  *
143  *  This provides tlb_remove_table(), to be used instead of tlb_remove_page()
144  *  for page directores (__p*_free_tlb()).
145  *
146  *  Useful if your architecture has non-page page directories.
147  *
148  *  When used, an architecture is expected to provide __tlb_remove_table()
149  *  which does the actual freeing of these pages.
150  *
151  *  MMU_GATHER_RCU_TABLE_FREE
152  *
153  *  Like MMU_GATHER_TABLE_FREE, and adds semi-RCU semantics to the free (see
154  *  comment below).
155  *
156  *  Useful if your architecture doesn't use IPIs for remote TLB invalidates
157  *  and therefore doesn't naturally serialize with software page-table walkers.
158  *
159  *  MMU_GATHER_NO_RANGE
160  *
161  *  Use this if your architecture lacks an efficient flush_tlb_range().
162  *
163  *  MMU_GATHER_NO_GATHER
164  *
165  *  If the option is set the mmu_gather will not track individual pages for
166  *  delayed page free anymore. A platform that enables the option needs to
167  *  provide its own implementation of the __tlb_remove_page_size() function to
168  *  free pages.
169  *
170  *  This is useful if your architecture already flushes TLB entries in the
171  *  various ptep_get_and_clear() functions.
172  */
173
174 #ifdef CONFIG_MMU_GATHER_TABLE_FREE
175
176 struct mmu_table_batch {
177 #ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
178         struct rcu_head         rcu;
179 #endif
180         unsigned int            nr;
181         void                    *tables[0];
182 };
183
184 #define MAX_TABLE_BATCH         \
185         ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
186
187 extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
188
189 #else /* !CONFIG_MMU_GATHER_HAVE_TABLE_FREE */
190
191 /*
192  * Without MMU_GATHER_TABLE_FREE the architecture is assumed to have page based
193  * page directories and we can use the normal page batching to free them.
194  */
195 #define tlb_remove_table(tlb, page) tlb_remove_page((tlb), (page))
196
197 #endif /* CONFIG_MMU_GATHER_TABLE_FREE */
198
199 #ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
200 /*
201  * This allows an architecture that does not use the linux page-tables for
202  * hardware to skip the TLBI when freeing page tables.
203  */
204 #ifndef tlb_needs_table_invalidate
205 #define tlb_needs_table_invalidate() (true)
206 #endif
207
208 #else
209
210 #ifdef tlb_needs_table_invalidate
211 #error tlb_needs_table_invalidate() requires MMU_GATHER_RCU_TABLE_FREE
212 #endif
213
214 #endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
215
216
217 #ifndef CONFIG_MMU_GATHER_NO_GATHER
218 /*
219  * If we can't allocate a page to make a big batch of page pointers
220  * to work on, then just handle a few from the on-stack structure.
221  */
222 #define MMU_GATHER_BUNDLE       8
223
224 struct mmu_gather_batch {
225         struct mmu_gather_batch *next;
226         unsigned int            nr;
227         unsigned int            max;
228         struct page             *pages[0];
229 };
230
231 #define MAX_GATHER_BATCH        \
232         ((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *))
233
234 /*
235  * Limit the maximum number of mmu_gather batches to reduce a risk of soft
236  * lockups for non-preemptible kernels on huge machines when a lot of memory
237  * is zapped during unmapping.
238  * 10K pages freed at once should be safe even without a preemption point.
239  */
240 #define MAX_GATHER_BATCH_COUNT  (10000UL/MAX_GATHER_BATCH)
241
242 extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
243                                    int page_size);
244 #endif
245
246 /*
247  * struct mmu_gather is an opaque type used by the mm code for passing around
248  * any data needed by arch specific code for tlb_remove_page.
249  */
250 struct mmu_gather {
251         struct mm_struct        *mm;
252
253 #ifdef CONFIG_MMU_GATHER_TABLE_FREE
254         struct mmu_table_batch  *batch;
255 #endif
256
257         unsigned long           start;
258         unsigned long           end;
259         /*
260          * we are in the middle of an operation to clear
261          * a full mm and can make some optimizations
262          */
263         unsigned int            fullmm : 1;
264
265         /*
266          * we have performed an operation which
267          * requires a complete flush of the tlb
268          */
269         unsigned int            need_flush_all : 1;
270
271         /*
272          * we have removed page directories
273          */
274         unsigned int            freed_tables : 1;
275
276         /*
277          * at which levels have we cleared entries?
278          */
279         unsigned int            cleared_ptes : 1;
280         unsigned int            cleared_pmds : 1;
281         unsigned int            cleared_puds : 1;
282         unsigned int            cleared_p4ds : 1;
283
284         /*
285          * tracks VM_EXEC | VM_HUGETLB in tlb_start_vma
286          */
287         unsigned int            vma_exec : 1;
288         unsigned int            vma_huge : 1;
289
290         unsigned int            batch_count;
291
292 #ifndef CONFIG_MMU_GATHER_NO_GATHER
293         struct mmu_gather_batch *active;
294         struct mmu_gather_batch local;
295         struct page             *__pages[MMU_GATHER_BUNDLE];
296
297 #ifdef CONFIG_MMU_GATHER_PAGE_SIZE
298         unsigned int page_size;
299 #endif
300 #endif
301 };
302
303 void tlb_flush_mmu(struct mmu_gather *tlb);
304
305 static inline void __tlb_adjust_range(struct mmu_gather *tlb,
306                                       unsigned long address,
307                                       unsigned int range_size)
308 {
309         tlb->start = min(tlb->start, address);
310         tlb->end = max(tlb->end, address + range_size);
311 }
312
313 static inline void __tlb_reset_range(struct mmu_gather *tlb)
314 {
315         if (tlb->fullmm) {
316                 tlb->start = tlb->end = ~0;
317         } else {
318                 tlb->start = TASK_SIZE;
319                 tlb->end = 0;
320         }
321         tlb->freed_tables = 0;
322         tlb->cleared_ptes = 0;
323         tlb->cleared_pmds = 0;
324         tlb->cleared_puds = 0;
325         tlb->cleared_p4ds = 0;
326         /*
327          * Do not reset mmu_gather::vma_* fields here, we do not
328          * call into tlb_start_vma() again to set them if there is an
329          * intermediate flush.
330          */
331 }
332
333 #ifdef CONFIG_MMU_GATHER_NO_RANGE
334
335 #if defined(tlb_flush) || defined(tlb_start_vma) || defined(tlb_end_vma)
336 #error MMU_GATHER_NO_RANGE relies on default tlb_flush(), tlb_start_vma() and tlb_end_vma()
337 #endif
338
339 /*
340  * When an architecture does not have efficient means of range flushing TLBs
341  * there is no point in doing intermediate flushes on tlb_end_vma() to keep the
342  * range small. We equally don't have to worry about page granularity or other
343  * things.
344  *
345  * All we need to do is issue a full flush for any !0 range.
346  */
347 static inline void tlb_flush(struct mmu_gather *tlb)
348 {
349         if (tlb->end)
350                 flush_tlb_mm(tlb->mm);
351 }
352
353 static inline void
354 tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
355
356 #define tlb_end_vma tlb_end_vma
357 static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
358
359 #else /* CONFIG_MMU_GATHER_NO_RANGE */
360
361 #ifndef tlb_flush
362
363 #if defined(tlb_start_vma) || defined(tlb_end_vma)
364 #error Default tlb_flush() relies on default tlb_start_vma() and tlb_end_vma()
365 #endif
366
367 /*
368  * When an architecture does not provide its own tlb_flush() implementation
369  * but does have a reasonably efficient flush_vma_range() implementation
370  * use that.
371  */
372 static inline void tlb_flush(struct mmu_gather *tlb)
373 {
374         if (tlb->fullmm || tlb->need_flush_all) {
375                 flush_tlb_mm(tlb->mm);
376         } else if (tlb->end) {
377                 struct vm_area_struct vma = {
378                         .vm_mm = tlb->mm,
379                         .vm_flags = (tlb->vma_exec ? VM_EXEC    : 0) |
380                                     (tlb->vma_huge ? VM_HUGETLB : 0),
381                 };
382
383                 flush_tlb_range(&vma, tlb->start, tlb->end);
384         }
385 }
386
387 static inline void
388 tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
389 {
390         /*
391          * flush_tlb_range() implementations that look at VM_HUGETLB (tile,
392          * mips-4k) flush only large pages.
393          *
394          * flush_tlb_range() implementations that flush I-TLB also flush D-TLB
395          * (tile, xtensa, arm), so it's ok to just add VM_EXEC to an existing
396          * range.
397          *
398          * We rely on tlb_end_vma() to issue a flush, such that when we reset
399          * these values the batch is empty.
400          */
401         tlb->vma_huge = is_vm_hugetlb_page(vma);
402         tlb->vma_exec = !!(vma->vm_flags & VM_EXEC);
403 }
404
405 #else
406
407 static inline void
408 tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
409
410 #endif
411
412 #endif /* CONFIG_MMU_GATHER_NO_RANGE */
413
414 static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
415 {
416         /*
417          * Anything calling __tlb_adjust_range() also sets at least one of
418          * these bits.
419          */
420         if (!(tlb->freed_tables || tlb->cleared_ptes || tlb->cleared_pmds ||
421               tlb->cleared_puds || tlb->cleared_p4ds))
422                 return;
423
424         tlb_flush(tlb);
425         mmu_notifier_invalidate_range(tlb->mm, tlb->start, tlb->end);
426         __tlb_reset_range(tlb);
427 }
428
429 static inline void tlb_remove_page_size(struct mmu_gather *tlb,
430                                         struct page *page, int page_size)
431 {
432         if (__tlb_remove_page_size(tlb, page, page_size))
433                 tlb_flush_mmu(tlb);
434 }
435
436 static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
437 {
438         return __tlb_remove_page_size(tlb, page, PAGE_SIZE);
439 }
440
441 /* tlb_remove_page
442  *      Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when
443  *      required.
444  */
445 static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
446 {
447         return tlb_remove_page_size(tlb, page, PAGE_SIZE);
448 }
449
450 static inline void tlb_change_page_size(struct mmu_gather *tlb,
451                                                      unsigned int page_size)
452 {
453 #ifdef CONFIG_MMU_GATHER_PAGE_SIZE
454         if (tlb->page_size && tlb->page_size != page_size) {
455                 if (!tlb->fullmm && !tlb->need_flush_all)
456                         tlb_flush_mmu(tlb);
457         }
458
459         tlb->page_size = page_size;
460 #endif
461 }
462
463 static inline unsigned long tlb_get_unmap_shift(struct mmu_gather *tlb)
464 {
465         if (tlb->cleared_ptes)
466                 return PAGE_SHIFT;
467         if (tlb->cleared_pmds)
468                 return PMD_SHIFT;
469         if (tlb->cleared_puds)
470                 return PUD_SHIFT;
471         if (tlb->cleared_p4ds)
472                 return P4D_SHIFT;
473
474         return PAGE_SHIFT;
475 }
476
477 static inline unsigned long tlb_get_unmap_size(struct mmu_gather *tlb)
478 {
479         return 1UL << tlb_get_unmap_shift(tlb);
480 }
481
482 /*
483  * In the case of tlb vma handling, we can optimise these away in the
484  * case where we're doing a full MM flush.  When we're doing a munmap,
485  * the vmas are adjusted to only cover the region to be torn down.
486  */
487 #ifndef tlb_start_vma
488 static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
489 {
490         if (tlb->fullmm)
491                 return;
492
493         tlb_update_vma_flags(tlb, vma);
494         flush_cache_range(vma, vma->vm_start, vma->vm_end);
495 }
496 #endif
497
498 #ifndef tlb_end_vma
499 static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
500 {
501         if (tlb->fullmm)
502                 return;
503
504         /*
505          * Do a TLB flush and reset the range at VMA boundaries; this avoids
506          * the ranges growing with the unused space between consecutive VMAs,
507          * but also the mmu_gather::vma_* flags from tlb_start_vma() rely on
508          * this.
509          */
510         tlb_flush_mmu_tlbonly(tlb);
511 }
512 #endif
513
514 /*
515  * tlb_flush_{pte|pmd|pud|p4d}_range() adjust the tlb->start and tlb->end,
516  * and set corresponding cleared_*.
517  */
518 static inline void tlb_flush_pte_range(struct mmu_gather *tlb,
519                                      unsigned long address, unsigned long size)
520 {
521         __tlb_adjust_range(tlb, address, size);
522         tlb->cleared_ptes = 1;
523 }
524
525 static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
526                                      unsigned long address, unsigned long size)
527 {
528         __tlb_adjust_range(tlb, address, size);
529         tlb->cleared_pmds = 1;
530 }
531
532 static inline void tlb_flush_pud_range(struct mmu_gather *tlb,
533                                      unsigned long address, unsigned long size)
534 {
535         __tlb_adjust_range(tlb, address, size);
536         tlb->cleared_puds = 1;
537 }
538
539 static inline void tlb_flush_p4d_range(struct mmu_gather *tlb,
540                                      unsigned long address, unsigned long size)
541 {
542         __tlb_adjust_range(tlb, address, size);
543         tlb->cleared_p4ds = 1;
544 }
545
546 #ifndef __tlb_remove_tlb_entry
547 #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
548 #endif
549
550 /**
551  * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
552  *
553  * Record the fact that pte's were really unmapped by updating the range,
554  * so we can later optimise away the tlb invalidate.   This helps when
555  * userspace is unmapping already-unmapped pages, which happens quite a lot.
556  */
557 #define tlb_remove_tlb_entry(tlb, ptep, address)                \
558         do {                                                    \
559                 tlb_flush_pte_range(tlb, address, PAGE_SIZE);   \
560                 __tlb_remove_tlb_entry(tlb, ptep, address);     \
561         } while (0)
562
563 #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address)        \
564         do {                                                    \
565                 unsigned long _sz = huge_page_size(h);          \
566                 if (_sz == PMD_SIZE)                            \
567                         tlb_flush_pmd_range(tlb, address, _sz); \
568                 else if (_sz == PUD_SIZE)                       \
569                         tlb_flush_pud_range(tlb, address, _sz); \
570                 __tlb_remove_tlb_entry(tlb, ptep, address);     \
571         } while (0)
572
573 /**
574  * tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation
575  * This is a nop so far, because only x86 needs it.
576  */
577 #ifndef __tlb_remove_pmd_tlb_entry
578 #define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
579 #endif
580
581 #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address)                    \
582         do {                                                            \
583                 tlb_flush_pmd_range(tlb, address, HPAGE_PMD_SIZE);      \
584                 __tlb_remove_pmd_tlb_entry(tlb, pmdp, address);         \
585         } while (0)
586
587 /**
588  * tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb
589  * invalidation. This is a nop so far, because only x86 needs it.
590  */
591 #ifndef __tlb_remove_pud_tlb_entry
592 #define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0)
593 #endif
594
595 #define tlb_remove_pud_tlb_entry(tlb, pudp, address)                    \
596         do {                                                            \
597                 tlb_flush_pud_range(tlb, address, HPAGE_PUD_SIZE);      \
598                 __tlb_remove_pud_tlb_entry(tlb, pudp, address);         \
599         } while (0)
600
601 /*
602  * For things like page tables caches (ie caching addresses "inside" the
603  * page tables, like x86 does), for legacy reasons, flushing an
604  * individual page had better flush the page table caches behind it. This
605  * is definitely how x86 works, for example. And if you have an
606  * architected non-legacy page table cache (which I'm not aware of
607  * anybody actually doing), you're going to have some architecturally
608  * explicit flushing for that, likely *separate* from a regular TLB entry
609  * flush, and thus you'd need more than just some range expansion..
610  *
611  * So if we ever find an architecture
612  * that would want something that odd, I think it is up to that
613  * architecture to do its own odd thing, not cause pain for others
614  * http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com
615  *
616  * For now w.r.t page table cache, mark the range_size as PAGE_SIZE
617  */
618
619 #ifndef pte_free_tlb
620 #define pte_free_tlb(tlb, ptep, address)                        \
621         do {                                                    \
622                 tlb_flush_pmd_range(tlb, address, PAGE_SIZE);   \
623                 tlb->freed_tables = 1;                          \
624                 __pte_free_tlb(tlb, ptep, address);             \
625         } while (0)
626 #endif
627
628 #ifndef pmd_free_tlb
629 #define pmd_free_tlb(tlb, pmdp, address)                        \
630         do {                                                    \
631                 tlb_flush_pud_range(tlb, address, PAGE_SIZE);   \
632                 tlb->freed_tables = 1;                          \
633                 __pmd_free_tlb(tlb, pmdp, address);             \
634         } while (0)
635 #endif
636
637 #ifndef pud_free_tlb
638 #define pud_free_tlb(tlb, pudp, address)                        \
639         do {                                                    \
640                 tlb_flush_p4d_range(tlb, address, PAGE_SIZE);   \
641                 tlb->freed_tables = 1;                          \
642                 __pud_free_tlb(tlb, pudp, address);             \
643         } while (0)
644 #endif
645
646 #ifndef p4d_free_tlb
647 #define p4d_free_tlb(tlb, pudp, address)                        \
648         do {                                                    \
649                 __tlb_adjust_range(tlb, address, PAGE_SIZE);    \
650                 tlb->freed_tables = 1;                          \
651                 __p4d_free_tlb(tlb, pudp, address);             \
652         } while (0)
653 #endif
654
655 #endif /* CONFIG_MMU */
656
657 #endif /* _ASM_GENERIC__TLB_H */