LoongArch: Parse MADT to get multi-processor information
[linux-2.6-microblaze.git] / drivers / watchdog / acquirewdt.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *      Acquire Single Board Computer Watchdog Timer driver
4  *
5  *      Based on wdt.c. Original copyright messages:
6  *
7  *      (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
8  *                                              All Rights Reserved.
9  *
10  *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
11  *      warranty for any of this software. This material is provided
12  *      "AS-IS" and at no charge.
13  *
14  *      (c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
15  *
16  *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
17  *          Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
18  *          Can't add timeout - driver doesn't allow changing value
19  */
20
21 /*
22  *      Theory of Operation:
23  *              The Watch-Dog Timer is provided to ensure that standalone
24  *              Systems can always recover from catastrophic conditions that
25  *              caused the CPU to crash. This condition may have occurred by
26  *              external EMI or a software bug. When the CPU stops working
27  *              correctly, hardware on the board will either perform a hardware
28  *              reset (cold boot) or a non-maskable interrupt (NMI) to bring the
29  *              system back to a known state.
30  *
31  *              The Watch-Dog Timer is controlled by two I/O Ports.
32  *                443 hex       - Read  - Enable or refresh the Watch-Dog Timer
33  *                043 hex       - Read  - Disable the Watch-Dog Timer
34  *
35  *              To enable the Watch-Dog Timer, a read from I/O port 443h must
36  *              be performed. This will enable and activate the countdown timer
37  *              which will eventually time out and either reset the CPU or cause
38  *              an NMI depending on the setting of a jumper. To ensure that this
39  *              reset condition does not occur, the Watch-Dog Timer must be
40  *              periodically refreshed by reading the same I/O port 443h.
41  *              The Watch-Dog Timer is disabled by reading I/O port 043h.
42  *
43  *              The Watch-Dog Timer Time-Out Period is set via jumpers.
44  *              It can be 1, 2, 10, 20, 110 or 220 seconds.
45  */
46
47 /*
48  *      Includes, defines, variables, module parameters, ...
49  */
50
51 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
52
53 /* Includes */
54 #include <linux/module.h>               /* For module specific items */
55 #include <linux/moduleparam.h>          /* For new moduleparam's */
56 #include <linux/types.h>                /* For standard types (like size_t) */
57 #include <linux/errno.h>                /* For the -ENODEV/... values */
58 #include <linux/kernel.h>               /* For printk/panic/... */
59 #include <linux/miscdevice.h>           /* For struct miscdevice */
60 #include <linux/watchdog.h>             /* For the watchdog specific items */
61 #include <linux/fs.h>                   /* For file operations */
62 #include <linux/ioport.h>               /* For io-port access */
63 #include <linux/platform_device.h>      /* For platform_driver framework */
64 #include <linux/init.h>                 /* For __init/__exit/... */
65 #include <linux/uaccess.h>              /* For copy_to_user/put_user/... */
66 #include <linux/io.h>                   /* For inb/outb/... */
67
68 /* Module information */
69 #define DRV_NAME "acquirewdt"
70 #define WATCHDOG_NAME "Acquire WDT"
71 /* There is no way to see what the correct time-out period is */
72 #define WATCHDOG_HEARTBEAT 0
73
74 /* internal variables */
75 /* the watchdog platform device */
76 static struct platform_device *acq_platform_device;
77 static unsigned long acq_is_open;
78 static char expect_close;
79
80 /* module parameters */
81 /* You must set this - there is no sane way to probe for this board. */
82 static int wdt_stop = 0x43;
83 module_param(wdt_stop, int, 0);
84 MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)");
85
86 /* You must set this - there is no sane way to probe for this board. */
87 static int wdt_start = 0x443;
88 module_param(wdt_start, int, 0);
89 MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)");
90
91 static bool nowayout = WATCHDOG_NOWAYOUT;
92 module_param(nowayout, bool, 0);
93 MODULE_PARM_DESC(nowayout,
94         "Watchdog cannot be stopped once started (default="
95         __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
96
97 /*
98  *      Watchdog Operations
99  */
100
101 static void acq_keepalive(void)
102 {
103         /* Write a watchdog value */
104         inb_p(wdt_start);
105 }
106
107 static void acq_stop(void)
108 {
109         /* Turn the card off */
110         inb_p(wdt_stop);
111 }
112
113 /*
114  *      /dev/watchdog handling
115  */
116
117 static ssize_t acq_write(struct file *file, const char __user *buf,
118                                                 size_t count, loff_t *ppos)
119 {
120         /* See if we got the magic character 'V' and reload the timer */
121         if (count) {
122                 if (!nowayout) {
123                         size_t i;
124                         /* note: just in case someone wrote the magic character
125                            five months ago... */
126                         expect_close = 0;
127                         /* scan to see whether or not we got the
128                            magic character */
129                         for (i = 0; i != count; i++) {
130                                 char c;
131                                 if (get_user(c, buf + i))
132                                         return -EFAULT;
133                                 if (c == 'V')
134                                         expect_close = 42;
135                         }
136                 }
137                 /* Well, anyhow someone wrote to us, we should
138                                 return that favour */
139                 acq_keepalive();
140         }
141         return count;
142 }
143
144 static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
145 {
146         int options, retval = -EINVAL;
147         void __user *argp = (void __user *)arg;
148         int __user *p = argp;
149         static const struct watchdog_info ident = {
150                 .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
151                 .firmware_version = 1,
152                 .identity = WATCHDOG_NAME,
153         };
154
155         switch (cmd) {
156         case WDIOC_GETSUPPORT:
157                 return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
158
159         case WDIOC_GETSTATUS:
160         case WDIOC_GETBOOTSTATUS:
161                 return put_user(0, p);
162
163         case WDIOC_SETOPTIONS:
164         {
165                 if (get_user(options, p))
166                         return -EFAULT;
167                 if (options & WDIOS_DISABLECARD) {
168                         acq_stop();
169                         retval = 0;
170                 }
171                 if (options & WDIOS_ENABLECARD) {
172                         acq_keepalive();
173                         retval = 0;
174                 }
175                 return retval;
176         }
177         case WDIOC_KEEPALIVE:
178                 acq_keepalive();
179                 return 0;
180
181         case WDIOC_GETTIMEOUT:
182                 return put_user(WATCHDOG_HEARTBEAT, p);
183
184         default:
185                 return -ENOTTY;
186         }
187 }
188
189 static int acq_open(struct inode *inode, struct file *file)
190 {
191         if (test_and_set_bit(0, &acq_is_open))
192                 return -EBUSY;
193
194         if (nowayout)
195                 __module_get(THIS_MODULE);
196
197         /* Activate */
198         acq_keepalive();
199         return stream_open(inode, file);
200 }
201
202 static int acq_close(struct inode *inode, struct file *file)
203 {
204         if (expect_close == 42) {
205                 acq_stop();
206         } else {
207                 pr_crit("Unexpected close, not stopping watchdog!\n");
208                 acq_keepalive();
209         }
210         clear_bit(0, &acq_is_open);
211         expect_close = 0;
212         return 0;
213 }
214
215 /*
216  *      Kernel Interfaces
217  */
218
219 static const struct file_operations acq_fops = {
220         .owner          = THIS_MODULE,
221         .llseek         = no_llseek,
222         .write          = acq_write,
223         .unlocked_ioctl = acq_ioctl,
224         .compat_ioctl   = compat_ptr_ioctl,
225         .open           = acq_open,
226         .release        = acq_close,
227 };
228
229 static struct miscdevice acq_miscdev = {
230         .minor  = WATCHDOG_MINOR,
231         .name   = "watchdog",
232         .fops   = &acq_fops,
233 };
234
235 /*
236  *      Init & exit routines
237  */
238
239 static int __init acq_probe(struct platform_device *dev)
240 {
241         int ret;
242
243         if (wdt_stop != wdt_start) {
244                 if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
245                         pr_err("I/O address 0x%04x already in use\n", wdt_stop);
246                         ret = -EIO;
247                         goto out;
248                 }
249         }
250
251         if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
252                 pr_err("I/O address 0x%04x already in use\n", wdt_start);
253                 ret = -EIO;
254                 goto unreg_stop;
255         }
256         ret = misc_register(&acq_miscdev);
257         if (ret != 0) {
258                 pr_err("cannot register miscdev on minor=%d (err=%d)\n",
259                        WATCHDOG_MINOR, ret);
260                 goto unreg_regions;
261         }
262         pr_info("initialized. (nowayout=%d)\n", nowayout);
263
264         return 0;
265 unreg_regions:
266         release_region(wdt_start, 1);
267 unreg_stop:
268         if (wdt_stop != wdt_start)
269                 release_region(wdt_stop, 1);
270 out:
271         return ret;
272 }
273
274 static int acq_remove(struct platform_device *dev)
275 {
276         misc_deregister(&acq_miscdev);
277         release_region(wdt_start, 1);
278         if (wdt_stop != wdt_start)
279                 release_region(wdt_stop, 1);
280
281         return 0;
282 }
283
284 static void acq_shutdown(struct platform_device *dev)
285 {
286         /* Turn the WDT off if we have a soft shutdown */
287         acq_stop();
288 }
289
290 static struct platform_driver acquirewdt_driver = {
291         .remove         = acq_remove,
292         .shutdown       = acq_shutdown,
293         .driver         = {
294                 .name   = DRV_NAME,
295         },
296 };
297
298 static int __init acq_init(void)
299 {
300         int err;
301
302         pr_info("WDT driver for Acquire single board computer initialising\n");
303
304         acq_platform_device = platform_device_register_simple(DRV_NAME,
305                                                                 -1, NULL, 0);
306         if (IS_ERR(acq_platform_device))
307                 return PTR_ERR(acq_platform_device);
308
309         err = platform_driver_probe(&acquirewdt_driver, acq_probe);
310         if (err)
311                 goto unreg_platform_device;
312         return 0;
313
314 unreg_platform_device:
315         platform_device_unregister(acq_platform_device);
316         return err;
317 }
318
319 static void __exit acq_exit(void)
320 {
321         platform_device_unregister(acq_platform_device);
322         platform_driver_unregister(&acquirewdt_driver);
323         pr_info("Watchdog Module Unloaded\n");
324 }
325
326 module_init(acq_init);
327 module_exit(acq_exit);
328
329 MODULE_AUTHOR("David Woodhouse");
330 MODULE_DESCRIPTION("Acquire Inc. Single Board Computer Watchdog Timer driver");
331 MODULE_LICENSE("GPL");