1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
8 #include <linux/delay.h>
9 #include <linux/moduleparam.h>
10 #include <linux/module.h>
12 #include "w1_internal.h"
14 static int w1_delay_parm = 1;
15 module_param_named(delay_coef, w1_delay_parm, int, 0);
17 static int w1_disable_irqs = 0;
18 module_param_named(disable_irqs, w1_disable_irqs, int, 0);
20 static u8 w1_crc8_table[] = {
21 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
22 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
23 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98,
24 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255,
25 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7,
26 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154,
27 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36,
28 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185,
29 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205,
30 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80,
31 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238,
32 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115,
33 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139,
34 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22,
35 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168,
36 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53
39 static void w1_delay(unsigned long tm)
41 udelay(tm * w1_delay_parm);
44 static void w1_write_bit(struct w1_master *dev, int bit);
45 static u8 w1_read_bit(struct w1_master *dev);
48 * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level.
49 * @dev: the master device
50 * @bit: 0 - write a 0, 1 - write a 0 read the level
52 u8 w1_touch_bit(struct w1_master *dev, int bit)
54 if (dev->bus_master->touch_bit)
55 return dev->bus_master->touch_bit(dev->bus_master->data, bit);
57 return w1_read_bit(dev);
63 EXPORT_SYMBOL_GPL(w1_touch_bit);
66 * w1_write_bit() - Generates a write-0 or write-1 cycle.
67 * @dev: the master device
70 * Only call if dev->bus_master->touch_bit is NULL
72 static void w1_write_bit(struct w1_master *dev, int bit)
74 unsigned long flags = 0;
76 if(w1_disable_irqs) local_irq_save(flags);
79 dev->bus_master->write_bit(dev->bus_master->data, 0);
81 dev->bus_master->write_bit(dev->bus_master->data, 1);
84 dev->bus_master->write_bit(dev->bus_master->data, 0);
86 dev->bus_master->write_bit(dev->bus_master->data, 1);
90 if(w1_disable_irqs) local_irq_restore(flags);
94 * w1_pre_write() - pre-write operations
95 * @dev: the master device
97 * Pre-write operation, currently only supporting strong pullups.
98 * Program the hardware for a strong pullup, if one has been requested and
99 * the hardware supports it.
101 static void w1_pre_write(struct w1_master *dev)
103 if (dev->pullup_duration &&
104 dev->enable_pullup && dev->bus_master->set_pullup) {
105 dev->bus_master->set_pullup(dev->bus_master->data,
106 dev->pullup_duration);
111 * w1_post_write() - post-write options
112 * @dev: the master device
114 * Post-write operation, currently only supporting strong pullups.
115 * If a strong pullup was requested, clear it if the hardware supports
116 * them, or execute the delay otherwise, in either case clear the request.
118 static void w1_post_write(struct w1_master *dev)
120 if (dev->pullup_duration) {
121 if (dev->enable_pullup && dev->bus_master->set_pullup)
122 dev->bus_master->set_pullup(dev->bus_master->data, 0);
124 msleep(dev->pullup_duration);
125 dev->pullup_duration = 0;
130 * w1_write_8() - Writes 8 bits.
131 * @dev: the master device
132 * @byte: the byte to write
134 void w1_write_8(struct w1_master *dev, u8 byte)
138 if (dev->bus_master->write_byte) {
140 dev->bus_master->write_byte(dev->bus_master->data, byte);
143 for (i = 0; i < 8; ++i) {
146 w1_touch_bit(dev, (byte >> i) & 0x1);
150 EXPORT_SYMBOL_GPL(w1_write_8);
154 * w1_read_bit() - Generates a write-1 cycle and samples the level.
155 * @dev: the master device
157 * Only call if dev->bus_master->touch_bit is NULL
159 static u8 w1_read_bit(struct w1_master *dev)
162 unsigned long flags = 0;
164 /* sample timing is critical here */
165 local_irq_save(flags);
166 dev->bus_master->write_bit(dev->bus_master->data, 0);
168 dev->bus_master->write_bit(dev->bus_master->data, 1);
171 result = dev->bus_master->read_bit(dev->bus_master->data);
172 local_irq_restore(flags);
180 * w1_triplet() - * Does a triplet - used for searching ROM addresses.
181 * @dev: the master device
182 * @bdir: the bit to write if both id_bit and comp_bit are 0
189 * If both bits 0 & 1 are set, the search should be restarted.
191 * Return: bit fields - see above
193 u8 w1_triplet(struct w1_master *dev, int bdir)
195 if (dev->bus_master->triplet)
196 return dev->bus_master->triplet(dev->bus_master->data, bdir);
198 u8 id_bit = w1_touch_bit(dev, 1);
199 u8 comp_bit = w1_touch_bit(dev, 1);
202 if (id_bit && comp_bit)
203 return 0x03; /* error */
205 if (!id_bit && !comp_bit) {
206 /* Both bits are valid, take the direction given */
207 retval = bdir ? 0x04 : 0;
209 /* Only one bit is valid, take that direction */
211 retval = id_bit ? 0x05 : 0x02;
214 if (dev->bus_master->touch_bit)
215 w1_touch_bit(dev, bdir);
217 w1_write_bit(dev, bdir);
221 EXPORT_SYMBOL_GPL(w1_triplet);
224 * w1_read_8() - Reads 8 bits.
225 * @dev: the master device
227 * Return: the byte read
229 u8 w1_read_8(struct w1_master *dev)
234 if (dev->bus_master->read_byte)
235 res = dev->bus_master->read_byte(dev->bus_master->data);
237 for (i = 0; i < 8; ++i)
238 res |= (w1_touch_bit(dev,1) << i);
242 EXPORT_SYMBOL_GPL(w1_read_8);
245 * w1_write_block() - Writes a series of bytes.
246 * @dev: the master device
247 * @buf: pointer to the data to write
248 * @len: the number of bytes to write
250 void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
254 if (dev->bus_master->write_block) {
256 dev->bus_master->write_block(dev->bus_master->data, buf, len);
259 for (i = 0; i < len; ++i)
260 w1_write_8(dev, buf[i]); /* calls w1_pre_write */
263 EXPORT_SYMBOL_GPL(w1_write_block);
266 * w1_touch_block() - Touches a series of bytes.
267 * @dev: the master device
268 * @buf: pointer to the data to write
269 * @len: the number of bytes to write
271 void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
276 for (i = 0; i < len; ++i) {
278 for (j = 0; j < 8; ++j) {
281 tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j;
287 EXPORT_SYMBOL_GPL(w1_touch_block);
290 * w1_read_block() - Reads a series of bytes.
291 * @dev: the master device
292 * @buf: pointer to the buffer to fill
293 * @len: the number of bytes to read
294 * Return: the number of bytes read
296 u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
301 if (dev->bus_master->read_block)
302 ret = dev->bus_master->read_block(dev->bus_master->data, buf, len);
304 for (i = 0; i < len; ++i)
305 buf[i] = w1_read_8(dev);
311 EXPORT_SYMBOL_GPL(w1_read_block);
314 * w1_reset_bus() - Issues a reset bus sequence.
315 * @dev: the master device
316 * Return: 0=Device present, 1=No device present or error
318 int w1_reset_bus(struct w1_master *dev)
321 unsigned long flags = 0;
323 if(w1_disable_irqs) local_irq_save(flags);
325 if (dev->bus_master->reset_bus)
326 result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
328 dev->bus_master->write_bit(dev->bus_master->data, 0);
329 /* minimum 480, max ? us
330 * be nice and sleep, except 18b20 spec lists 960us maximum,
331 * so until we can sleep with microsecond accuracy, spin.
332 * Feel free to come up with some other way to give up the
333 * cpu for such a short amount of time AND get it back in
334 * the maximum amount of time.
337 dev->bus_master->write_bit(dev->bus_master->data, 1);
340 result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
341 /* minimum 70 (above) + 430 = 500 us
342 * There aren't any timing requirements between a reset and
343 * the following transactions. Sleeping is safe here.
345 /* w1_delay(430); min required time */
349 if(w1_disable_irqs) local_irq_restore(flags);
353 EXPORT_SYMBOL_GPL(w1_reset_bus);
355 u8 w1_calc_crc8(u8 * data, int len)
360 crc = w1_crc8_table[crc ^ *data++];
364 EXPORT_SYMBOL_GPL(w1_calc_crc8);
366 void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
369 if (dev->bus_master->search)
370 dev->bus_master->search(dev->bus_master->data, dev,
373 w1_search(dev, search_type, cb);
377 * w1_reset_select_slave() - reset and select a slave
378 * @sl: the slave to select
380 * Resets the bus and then selects the slave by sending either a skip rom
381 * or a rom match. A skip rom is issued if there is only one device
382 * registered on the bus.
383 * The w1 master lock must be held.
385 * Return: 0=success, anything else=error
387 int w1_reset_select_slave(struct w1_slave *sl)
389 if (w1_reset_bus(sl->master))
392 if (sl->master->slave_count == 1)
393 w1_write_8(sl->master, W1_SKIP_ROM);
395 u8 match[9] = {W1_MATCH_ROM, };
396 u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
398 memcpy(&match[1], &rn, 8);
399 w1_write_block(sl->master, match, 9);
403 EXPORT_SYMBOL_GPL(w1_reset_select_slave);
406 * w1_reset_resume_command() - resume instead of another match ROM
407 * @dev: the master device
409 * When the workflow with a slave amongst many requires several
410 * successive commands a reset between each, this function is similar
411 * to doing a reset then a match ROM for the last matched ROM. The
412 * advantage being that the matched ROM step is skipped in favor of the
413 * resume command. The slave must support the command of course.
415 * If the bus has only one slave, traditionnaly the match ROM is skipped
416 * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this
417 * doesn't work of course, but the resume command is the next best thing.
419 * The w1 master lock must be held.
421 int w1_reset_resume_command(struct w1_master *dev)
423 if (w1_reset_bus(dev))
426 w1_write_8(dev, dev->slave_count > 1 ? W1_RESUME_CMD : W1_SKIP_ROM);
429 EXPORT_SYMBOL_GPL(w1_reset_resume_command);
432 * w1_next_pullup() - register for a strong pullup
433 * @dev: the master device
434 * @delay: time in milliseconds
436 * Put out a strong pull-up of the specified duration after the next write
437 * operation. Not all hardware supports strong pullups. Hardware that
438 * doesn't support strong pullups will sleep for the given time after the
439 * write operation without a strong pullup. This is a one shot request for
440 * the next write, specifying zero will clear a previous request.
441 * The w1 master lock must be held.
443 * Return: 0=success, anything else=error
445 void w1_next_pullup(struct w1_master *dev, int delay)
447 dev->pullup_duration = delay;
449 EXPORT_SYMBOL_GPL(w1_next_pullup);