1 // SPDX-License-Identifier: GPL-2.0+
3 * TI 3410/5052 USB Serial Driver
5 * Copyright (C) 2004 Texas Instruments
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
11 * For questions or problems with this driver, contact Texas Instruments
12 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
13 * Peter Berger <pberger@brimson.com>.
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/firmware.h>
19 #include <linux/slab.h>
20 #include <linux/tty.h>
21 #include <linux/tty_driver.h>
22 #include <linux/tty_flip.h>
23 #include <linux/module.h>
24 #include <linux/spinlock.h>
25 #include <linux/ioctl.h>
26 #include <linux/serial.h>
27 #include <linux/kfifo.h>
28 #include <linux/mutex.h>
29 #include <linux/uaccess.h>
30 #include <linux/usb.h>
31 #include <linux/usb/serial.h>
33 /* Configuration ids */
34 #define TI_BOOT_CONFIG 1
35 #define TI_ACTIVE_CONFIG 2
37 /* Vendor and product ids */
38 #define TI_VENDOR_ID 0x0451
39 #define IBM_VENDOR_ID 0x04b3
40 #define TI_3410_PRODUCT_ID 0x3410
41 #define IBM_4543_PRODUCT_ID 0x4543
42 #define IBM_454B_PRODUCT_ID 0x454b
43 #define IBM_454C_PRODUCT_ID 0x454c
44 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
45 #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
46 #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
47 #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
48 #define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
49 #define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */
51 /* Multi-Tech vendor and product ids */
52 #define MTS_VENDOR_ID 0x06E0
53 #define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
54 #define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
55 #define MTS_CDMA_PRODUCT_ID 0xF110
56 #define MTS_GSM_PRODUCT_ID 0xF111
57 #define MTS_EDGE_PRODUCT_ID 0xF112
58 #define MTS_MT9234MU_PRODUCT_ID 0xF114
59 #define MTS_MT9234ZBA_PRODUCT_ID 0xF115
60 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
62 /* Abbott Diabetics vendor and product ids */
63 #define ABBOTT_VENDOR_ID 0x1a61
64 #define ABBOTT_STEREO_PLUG_ID 0x3410
65 #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
66 #define ABBOTT_STRIP_PORT_ID 0x3420
68 /* Honeywell vendor and product IDs */
69 #define HONEYWELL_VENDOR_ID 0x10ac
70 #define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
72 /* Moxa UPORT 11x0 vendor and product IDs */
73 #define MXU1_VENDOR_ID 0x110a
74 #define MXU1_1110_PRODUCT_ID 0x1110
75 #define MXU1_1130_PRODUCT_ID 0x1130
76 #define MXU1_1150_PRODUCT_ID 0x1150
77 #define MXU1_1151_PRODUCT_ID 0x1151
78 #define MXU1_1131_PRODUCT_ID 0x1131
81 #define TI_GET_VERSION 0x01
82 #define TI_GET_PORT_STATUS 0x02
83 #define TI_GET_PORT_DEV_INFO 0x03
84 #define TI_GET_CONFIG 0x04
85 #define TI_SET_CONFIG 0x05
86 #define TI_OPEN_PORT 0x06
87 #define TI_CLOSE_PORT 0x07
88 #define TI_START_PORT 0x08
89 #define TI_STOP_PORT 0x09
90 #define TI_TEST_PORT 0x0A
91 #define TI_PURGE_PORT 0x0B
92 #define TI_RESET_EXT_DEVICE 0x0C
93 #define TI_WRITE_DATA 0x80
94 #define TI_READ_DATA 0x81
95 #define TI_REQ_TYPE_CLASS 0x82
97 /* Module identifiers */
98 #define TI_I2C_PORT 0x01
99 #define TI_IEEE1284_PORT 0x02
100 #define TI_UART1_PORT 0x03
101 #define TI_UART2_PORT 0x04
102 #define TI_RAM_PORT 0x05
105 #define TI_MSR_DELTA_CTS 0x01
106 #define TI_MSR_DELTA_DSR 0x02
107 #define TI_MSR_DELTA_RI 0x04
108 #define TI_MSR_DELTA_CD 0x08
109 #define TI_MSR_CTS 0x10
110 #define TI_MSR_DSR 0x20
111 #define TI_MSR_RI 0x40
112 #define TI_MSR_CD 0x80
113 #define TI_MSR_DELTA_MASK 0x0F
114 #define TI_MSR_MASK 0xF0
117 #define TI_LSR_OVERRUN_ERROR 0x01
118 #define TI_LSR_PARITY_ERROR 0x02
119 #define TI_LSR_FRAMING_ERROR 0x04
120 #define TI_LSR_BREAK 0x08
121 #define TI_LSR_ERROR 0x0F
122 #define TI_LSR_RX_FULL 0x10
123 #define TI_LSR_TX_EMPTY 0x20
124 #define TI_LSR_TX_EMPTY_BOTH 0x40
127 #define TI_LCR_BREAK 0x40
130 #define TI_MCR_LOOP 0x04
131 #define TI_MCR_DTR 0x10
132 #define TI_MCR_RTS 0x20
135 #define TI_UART_ENABLE_RTS_IN 0x0001
136 #define TI_UART_DISABLE_RTS 0x0002
137 #define TI_UART_ENABLE_PARITY_CHECKING 0x0008
138 #define TI_UART_ENABLE_DSR_OUT 0x0010
139 #define TI_UART_ENABLE_CTS_OUT 0x0020
140 #define TI_UART_ENABLE_X_OUT 0x0040
141 #define TI_UART_ENABLE_XA_OUT 0x0080
142 #define TI_UART_ENABLE_X_IN 0x0100
143 #define TI_UART_ENABLE_DTR_IN 0x0800
144 #define TI_UART_DISABLE_DTR 0x1000
145 #define TI_UART_ENABLE_MS_INTS 0x2000
146 #define TI_UART_ENABLE_AUTO_START_DMA 0x4000
149 #define TI_UART_NO_PARITY 0x00
150 #define TI_UART_ODD_PARITY 0x01
151 #define TI_UART_EVEN_PARITY 0x02
152 #define TI_UART_MARK_PARITY 0x03
153 #define TI_UART_SPACE_PARITY 0x04
156 #define TI_UART_1_STOP_BITS 0x00
157 #define TI_UART_1_5_STOP_BITS 0x01
158 #define TI_UART_2_STOP_BITS 0x02
160 /* Bits per character */
161 #define TI_UART_5_DATA_BITS 0x00
162 #define TI_UART_6_DATA_BITS 0x01
163 #define TI_UART_7_DATA_BITS 0x02
164 #define TI_UART_8_DATA_BITS 0x03
167 #define TI_UART_232 0x00
168 #define TI_UART_485_RECEIVER_DISABLED 0x01
169 #define TI_UART_485_RECEIVER_ENABLED 0x02
171 /* Pipe transfer mode and timeout */
172 #define TI_PIPE_MODE_CONTINUOUS 0x01
173 #define TI_PIPE_MODE_MASK 0x03
174 #define TI_PIPE_TIMEOUT_MASK 0x7C
175 #define TI_PIPE_TIMEOUT_ENABLE 0x80
178 struct ti_uart_config {
189 /* Get port status */
190 struct ti_port_status {
199 #define TI_PURGE_OUTPUT 0x00
200 #define TI_PURGE_INPUT 0x80
202 /* Read/Write data */
203 #define TI_RW_DATA_ADDR_SFR 0x10
204 #define TI_RW_DATA_ADDR_IDATA 0x20
205 #define TI_RW_DATA_ADDR_XDATA 0x30
206 #define TI_RW_DATA_ADDR_CODE 0x40
207 #define TI_RW_DATA_ADDR_GPIO 0x50
208 #define TI_RW_DATA_ADDR_I2C 0x60
209 #define TI_RW_DATA_ADDR_FLASH 0x70
210 #define TI_RW_DATA_ADDR_DSP 0x80
212 #define TI_RW_DATA_UNSPECIFIED 0x00
213 #define TI_RW_DATA_BYTE 0x01
214 #define TI_RW_DATA_WORD 0x02
215 #define TI_RW_DATA_DOUBLE_WORD 0x04
217 struct ti_write_data_bytes {
226 struct ti_read_data_request {
234 struct ti_read_data_bytes {
241 /* Interrupt struct */
242 struct ti_interrupt {
247 /* Interrupt codes */
248 #define TI_CODE_HARDWARE_ERROR 0xFF
249 #define TI_CODE_DATA_ERROR 0x03
250 #define TI_CODE_MODEM_STATUS 0x04
252 /* Download firmware max packet size */
253 #define TI_DOWNLOAD_MAX_PACKET_SIZE 64
255 /* Firmware image header */
256 struct ti_firmware_header {
262 #define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
263 #define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
264 #define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
265 #define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
267 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
268 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
270 #define TI_FIRMWARE_BUF_SIZE 16284
272 #define TI_TRANSFER_TIMEOUT 2
274 /* read urb states */
275 #define TI_READ_URB_RUNNING 0
276 #define TI_READ_URB_STOPPING 1
277 #define TI_READ_URB_STOPPED 2
279 #define TI_EXTRA_VID_PID_COUNT 5
285 u8 tp_uart_mode; /* 232 or 485 modes */
286 unsigned int tp_uart_base_addr;
287 struct ti_device *tp_tdev;
288 struct usb_serial_port *tp_port;
290 int tp_read_urb_state;
291 int tp_write_urb_in_use;
295 struct mutex td_open_close_lock;
296 int td_open_port_count;
297 struct usb_serial *td_serial;
302 static int ti_startup(struct usb_serial *serial);
303 static void ti_release(struct usb_serial *serial);
304 static int ti_port_probe(struct usb_serial_port *port);
305 static void ti_port_remove(struct usb_serial_port *port);
306 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
307 static void ti_close(struct usb_serial_port *port);
308 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
309 const unsigned char *data, int count);
310 static int ti_write_room(struct tty_struct *tty);
311 static int ti_chars_in_buffer(struct tty_struct *tty);
312 static bool ti_tx_empty(struct usb_serial_port *port);
313 static void ti_throttle(struct tty_struct *tty);
314 static void ti_unthrottle(struct tty_struct *tty);
315 static void ti_set_termios(struct tty_struct *tty,
316 struct usb_serial_port *port, struct ktermios *old_termios);
317 static int ti_tiocmget(struct tty_struct *tty);
318 static int ti_tiocmset(struct tty_struct *tty,
319 unsigned int set, unsigned int clear);
320 static void ti_break(struct tty_struct *tty, int break_state);
321 static void ti_interrupt_callback(struct urb *urb);
322 static void ti_bulk_in_callback(struct urb *urb);
323 static void ti_bulk_out_callback(struct urb *urb);
325 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
327 static void ti_send(struct ti_port *tport);
328 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
329 static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
330 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
331 static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
333 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
334 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
336 static int ti_command_out_sync(struct usb_device *udev, u8 command,
337 u16 moduleid, u16 value, void *data, int size);
338 static int ti_command_in_sync(struct usb_device *udev, u8 command,
339 u16 moduleid, u16 value, void *data, int size);
340 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
341 u16 value, void *data, int size);
342 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
343 u16 value, void *data, int size);
345 static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
346 unsigned long addr, u8 mask, u8 byte);
348 static int ti_download_firmware(struct ti_device *tdev);
350 static const struct usb_device_id ti_id_table_3410[] = {
351 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
352 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
353 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
354 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
355 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
356 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
357 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
358 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
359 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
360 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
361 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
362 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
363 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
364 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
365 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
366 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
367 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
368 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
369 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
370 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
371 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
372 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
376 static const struct usb_device_id ti_id_table_5052[] = {
377 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
378 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
379 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
380 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
384 static const struct usb_device_id ti_id_table_combined[] = {
385 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
386 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
387 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
388 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
389 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
390 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
391 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
392 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
393 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
394 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
395 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
396 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
397 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
398 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
399 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
400 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
401 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
402 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
403 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
404 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
405 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
406 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
407 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
408 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
409 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
410 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
414 static struct usb_serial_driver ti_1port_device = {
416 .owner = THIS_MODULE,
417 .name = "ti_usb_3410_5052_1",
419 .description = "TI USB 3410 1 port adapter",
420 .id_table = ti_id_table_3410,
423 .attach = ti_startup,
424 .release = ti_release,
425 .port_probe = ti_port_probe,
426 .port_remove = ti_port_remove,
430 .write_room = ti_write_room,
431 .chars_in_buffer = ti_chars_in_buffer,
432 .tx_empty = ti_tx_empty,
433 .throttle = ti_throttle,
434 .unthrottle = ti_unthrottle,
435 .get_serial = ti_get_serial_info,
436 .set_termios = ti_set_termios,
437 .tiocmget = ti_tiocmget,
438 .tiocmset = ti_tiocmset,
439 .tiocmiwait = usb_serial_generic_tiocmiwait,
440 .get_icount = usb_serial_generic_get_icount,
441 .break_ctl = ti_break,
442 .read_int_callback = ti_interrupt_callback,
443 .read_bulk_callback = ti_bulk_in_callback,
444 .write_bulk_callback = ti_bulk_out_callback,
447 static struct usb_serial_driver ti_2port_device = {
449 .owner = THIS_MODULE,
450 .name = "ti_usb_3410_5052_2",
452 .description = "TI USB 5052 2 port adapter",
453 .id_table = ti_id_table_5052,
456 .attach = ti_startup,
457 .release = ti_release,
458 .port_probe = ti_port_probe,
459 .port_remove = ti_port_remove,
463 .write_room = ti_write_room,
464 .chars_in_buffer = ti_chars_in_buffer,
465 .tx_empty = ti_tx_empty,
466 .throttle = ti_throttle,
467 .unthrottle = ti_unthrottle,
468 .get_serial = ti_get_serial_info,
469 .set_termios = ti_set_termios,
470 .tiocmget = ti_tiocmget,
471 .tiocmset = ti_tiocmset,
472 .tiocmiwait = usb_serial_generic_tiocmiwait,
473 .get_icount = usb_serial_generic_get_icount,
474 .break_ctl = ti_break,
475 .read_int_callback = ti_interrupt_callback,
476 .read_bulk_callback = ti_bulk_in_callback,
477 .write_bulk_callback = ti_bulk_out_callback,
480 static struct usb_serial_driver * const serial_drivers[] = {
481 &ti_1port_device, &ti_2port_device, NULL
484 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
485 MODULE_DESCRIPTION(TI_DRIVER_DESC);
486 MODULE_LICENSE("GPL");
488 MODULE_FIRMWARE("ti_3410.fw");
489 MODULE_FIRMWARE("ti_5052.fw");
490 MODULE_FIRMWARE("mts_cdma.fw");
491 MODULE_FIRMWARE("mts_gsm.fw");
492 MODULE_FIRMWARE("mts_edge.fw");
493 MODULE_FIRMWARE("mts_mt9234mu.fw");
494 MODULE_FIRMWARE("mts_mt9234zba.fw");
495 MODULE_FIRMWARE("moxa/moxa-1110.fw");
496 MODULE_FIRMWARE("moxa/moxa-1130.fw");
497 MODULE_FIRMWARE("moxa/moxa-1131.fw");
498 MODULE_FIRMWARE("moxa/moxa-1150.fw");
499 MODULE_FIRMWARE("moxa/moxa-1151.fw");
501 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
503 module_usb_serial_driver(serial_drivers, ti_id_table_combined);
505 static int ti_startup(struct usb_serial *serial)
507 struct ti_device *tdev;
508 struct usb_device *dev = serial->dev;
509 struct usb_host_interface *cur_altsetting;
515 "%s - product 0x%4X, num configurations %d, configuration value %d\n",
516 __func__, le16_to_cpu(dev->descriptor.idProduct),
517 dev->descriptor.bNumConfigurations,
518 dev->actconfig->desc.bConfigurationValue);
520 tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
524 mutex_init(&tdev->td_open_close_lock);
525 tdev->td_serial = serial;
526 usb_set_serial_data(serial, tdev);
528 /* determine device type */
529 if (serial->type == &ti_1port_device)
530 tdev->td_is_3410 = 1;
531 dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
532 tdev->td_is_3410 ? "3410" : "5052");
534 vid = le16_to_cpu(dev->descriptor.idVendor);
535 pid = le16_to_cpu(dev->descriptor.idProduct);
536 if (vid == MXU1_VENDOR_ID) {
538 case MXU1_1130_PRODUCT_ID:
539 case MXU1_1131_PRODUCT_ID:
540 tdev->td_rs485_only = true;
545 cur_altsetting = serial->interface->cur_altsetting;
546 num_endpoints = cur_altsetting->desc.bNumEndpoints;
548 /* if we have only 1 configuration and 1 endpoint, download firmware */
549 if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
550 status = ti_download_firmware(tdev);
555 /* 3410 must be reset, 5052 resets itself */
556 if (tdev->td_is_3410) {
557 msleep_interruptible(100);
558 usb_reset_device(dev);
565 /* the second configuration must be set */
566 if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
567 status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
568 status = status ? status : -ENODEV;
572 if (serial->num_bulk_in < serial->num_ports ||
573 serial->num_bulk_out < serial->num_ports) {
574 dev_err(&serial->interface->dev, "missing endpoints\n");
583 usb_set_serial_data(serial, NULL);
588 static void ti_release(struct usb_serial *serial)
590 struct ti_device *tdev = usb_get_serial_data(serial);
595 static int ti_port_probe(struct usb_serial_port *port)
597 struct ti_port *tport;
599 tport = kzalloc(sizeof(*tport), GFP_KERNEL);
603 spin_lock_init(&tport->tp_lock);
604 if (port == port->serial->port[0])
605 tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
607 tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
608 tport->tp_port = port;
609 tport->tp_tdev = usb_get_serial_data(port->serial);
611 if (tport->tp_tdev->td_rs485_only)
612 tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
614 tport->tp_uart_mode = TI_UART_232;
616 usb_set_serial_port_data(port, tport);
619 * The TUSB5052 LSR does not tell when the transmitter shift register
620 * has emptied so add a one-character drain delay.
622 if (!tport->tp_tdev->td_is_3410)
623 port->port.drain_delay = 1;
628 static void ti_port_remove(struct usb_serial_port *port)
630 struct ti_port *tport;
632 tport = usb_get_serial_port_data(port);
636 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
638 struct ti_port *tport = usb_get_serial_port_data(port);
639 struct ti_device *tdev;
640 struct usb_device *dev;
645 open_settings = (TI_PIPE_MODE_CONTINUOUS |
646 TI_PIPE_TIMEOUT_ENABLE |
647 (TI_TRANSFER_TIMEOUT << 2));
649 dev = port->serial->dev;
650 tdev = tport->tp_tdev;
652 /* only one open on any port on a device at a time */
653 if (mutex_lock_interruptible(&tdev->td_open_close_lock))
657 tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
659 /* start interrupt urb the first time a port is opened on this device */
660 if (tdev->td_open_port_count == 0) {
661 dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
662 urb = tdev->td_serial->port[0]->interrupt_in_urb;
664 dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
669 status = usb_submit_urb(urb, GFP_KERNEL);
671 dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
677 ti_set_termios(tty, port, &tty->termios);
679 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
681 dev_err(&port->dev, "%s - cannot send open command, %d\n",
686 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
688 dev_err(&port->dev, "%s - cannot send start command, %d\n",
693 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0);
695 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
699 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0);
701 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
706 /* reset the data toggle on the bulk endpoints to work around bug in
707 * host controllers where things get out of sync some times */
708 usb_clear_halt(dev, port->write_urb->pipe);
709 usb_clear_halt(dev, port->read_urb->pipe);
712 ti_set_termios(tty, port, &tty->termios);
714 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
716 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
721 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
723 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
729 urb = port->read_urb;
731 dev_err(&port->dev, "%s - no read urb\n", __func__);
735 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
736 urb->context = tport;
737 status = usb_submit_urb(urb, GFP_KERNEL);
739 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
744 tport->tp_is_open = 1;
745 ++tdev->td_open_port_count;
750 if (tdev->td_open_port_count == 0)
751 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
753 mutex_unlock(&tdev->td_open_close_lock);
758 static void ti_close(struct usb_serial_port *port)
760 struct ti_device *tdev;
761 struct ti_port *tport;
765 tdev = usb_get_serial_data(port->serial);
766 tport = usb_get_serial_port_data(port);
768 tport->tp_is_open = 0;
770 usb_kill_urb(port->read_urb);
771 usb_kill_urb(port->write_urb);
772 tport->tp_write_urb_in_use = 0;
773 spin_lock_irqsave(&tport->tp_lock, flags);
774 kfifo_reset_out(&port->write_fifo);
775 spin_unlock_irqrestore(&tport->tp_lock, flags);
777 status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0);
780 "%s - cannot send close port command, %d\n"
783 mutex_lock(&tdev->td_open_close_lock);
784 --tdev->td_open_port_count;
785 if (tdev->td_open_port_count == 0) {
786 /* last port is closed, shut down interrupt urb */
787 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
789 mutex_unlock(&tdev->td_open_close_lock);
793 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
794 const unsigned char *data, int count)
796 struct ti_port *tport = usb_get_serial_port_data(port);
802 if (!tport->tp_is_open)
805 count = kfifo_in_locked(&port->write_fifo, data, count,
813 static int ti_write_room(struct tty_struct *tty)
815 struct usb_serial_port *port = tty->driver_data;
816 struct ti_port *tport = usb_get_serial_port_data(port);
820 spin_lock_irqsave(&tport->tp_lock, flags);
821 room = kfifo_avail(&port->write_fifo);
822 spin_unlock_irqrestore(&tport->tp_lock, flags);
824 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
829 static int ti_chars_in_buffer(struct tty_struct *tty)
831 struct usb_serial_port *port = tty->driver_data;
832 struct ti_port *tport = usb_get_serial_port_data(port);
836 spin_lock_irqsave(&tport->tp_lock, flags);
837 chars = kfifo_len(&port->write_fifo);
838 spin_unlock_irqrestore(&tport->tp_lock, flags);
840 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
844 static bool ti_tx_empty(struct usb_serial_port *port)
846 struct ti_port *tport = usb_get_serial_port_data(port);
851 * TUSB5052 does not have the TEMT bit to tell if the shift register
854 if (tport->tp_tdev->td_is_3410)
855 mask = TI_LSR_TX_EMPTY_BOTH;
857 mask = TI_LSR_TX_EMPTY;
859 ret = ti_get_lsr(tport, &lsr);
860 if (!ret && !(lsr & mask))
866 static void ti_throttle(struct tty_struct *tty)
868 struct usb_serial_port *port = tty->driver_data;
869 struct ti_port *tport = usb_get_serial_port_data(port);
871 if (I_IXOFF(tty) || C_CRTSCTS(tty))
872 ti_stop_read(tport, tty);
877 static void ti_unthrottle(struct tty_struct *tty)
879 struct usb_serial_port *port = tty->driver_data;
880 struct ti_port *tport = usb_get_serial_port_data(port);
883 if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
884 status = ti_restart_read(tport, tty);
886 dev_err(&port->dev, "%s - cannot restart read, %d\n",
891 static void ti_set_termios(struct tty_struct *tty,
892 struct usb_serial_port *port, struct ktermios *old_termios)
894 struct ti_port *tport = usb_get_serial_port_data(port);
895 struct ti_uart_config *config;
902 config = kmalloc(sizeof(*config), GFP_KERNEL);
906 /* these flags must be set */
907 wflags |= TI_UART_ENABLE_MS_INTS;
908 wflags |= TI_UART_ENABLE_AUTO_START_DMA;
909 config->bUartMode = tport->tp_uart_mode;
911 switch (C_CSIZE(tty)) {
913 config->bDataBits = TI_UART_5_DATA_BITS;
916 config->bDataBits = TI_UART_6_DATA_BITS;
919 config->bDataBits = TI_UART_7_DATA_BITS;
923 config->bDataBits = TI_UART_8_DATA_BITS;
927 /* CMSPAR isn't supported by this driver */
928 tty->termios.c_cflag &= ~CMSPAR;
932 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
933 config->bParity = TI_UART_ODD_PARITY;
935 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
936 config->bParity = TI_UART_EVEN_PARITY;
939 wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
940 config->bParity = TI_UART_NO_PARITY;
944 config->bStopBits = TI_UART_2_STOP_BITS;
946 config->bStopBits = TI_UART_1_STOP_BITS;
948 if (C_CRTSCTS(tty)) {
949 /* RTS flow control must be off to drop RTS for baud rate B0 */
950 if ((C_BAUD(tty)) != B0)
951 wflags |= TI_UART_ENABLE_RTS_IN;
952 wflags |= TI_UART_ENABLE_CTS_OUT;
954 ti_restart_read(tport, tty);
957 if (I_IXOFF(tty) || I_IXON(tty)) {
958 config->cXon = START_CHAR(tty);
959 config->cXoff = STOP_CHAR(tty);
962 wflags |= TI_UART_ENABLE_X_IN;
964 ti_restart_read(tport, tty);
967 wflags |= TI_UART_ENABLE_X_OUT;
970 baud = tty_get_baud_rate(tty);
973 if (tport->tp_tdev->td_is_3410)
974 wbaudrate = (923077 + baud/2) / baud;
976 wbaudrate = (461538 + baud/2) / baud;
978 /* FIXME: Should calculate resulting baud here and report it back */
979 if ((C_BAUD(tty)) != B0)
980 tty_encode_baud_rate(tty, baud, baud);
983 "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
984 __func__, baud, wbaudrate, wflags,
985 config->bDataBits, config->bParity, config->bStopBits,
986 config->cXon, config->cXoff, config->bUartMode);
988 config->wBaudRate = cpu_to_be16(wbaudrate);
989 config->wFlags = cpu_to_be16(wflags);
991 status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config,
994 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
995 __func__, port->port_number, status);
997 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
998 mcr = tport->tp_shadow_mcr;
999 /* if baud rate is B0, clear RTS and DTR */
1000 if (C_BAUD(tty) == B0)
1001 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1002 status = ti_set_mcr(tport, mcr);
1004 dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n",
1005 __func__, port->port_number, status);
1011 static int ti_tiocmget(struct tty_struct *tty)
1013 struct usb_serial_port *port = tty->driver_data;
1014 struct ti_port *tport = usb_get_serial_port_data(port);
1015 unsigned int result;
1018 unsigned long flags;
1020 spin_lock_irqsave(&tport->tp_lock, flags);
1021 msr = tport->tp_msr;
1022 mcr = tport->tp_shadow_mcr;
1023 spin_unlock_irqrestore(&tport->tp_lock, flags);
1025 result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1026 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1027 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1028 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1029 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1030 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1031 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1033 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1039 static int ti_tiocmset(struct tty_struct *tty,
1040 unsigned int set, unsigned int clear)
1042 struct usb_serial_port *port = tty->driver_data;
1043 struct ti_port *tport = usb_get_serial_port_data(port);
1045 unsigned long flags;
1047 spin_lock_irqsave(&tport->tp_lock, flags);
1048 mcr = tport->tp_shadow_mcr;
1050 if (set & TIOCM_RTS)
1052 if (set & TIOCM_DTR)
1054 if (set & TIOCM_LOOP)
1057 if (clear & TIOCM_RTS)
1059 if (clear & TIOCM_DTR)
1061 if (clear & TIOCM_LOOP)
1062 mcr &= ~TI_MCR_LOOP;
1063 spin_unlock_irqrestore(&tport->tp_lock, flags);
1065 return ti_set_mcr(tport, mcr);
1069 static void ti_break(struct tty_struct *tty, int break_state)
1071 struct usb_serial_port *port = tty->driver_data;
1072 struct ti_port *tport = usb_get_serial_port_data(port);
1075 dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
1077 status = ti_write_byte(port, tport->tp_tdev,
1078 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1079 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1082 dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
1085 static int ti_get_port_from_code(unsigned char code)
1087 return (code >> 6) & 0x01;
1090 static int ti_get_func_from_code(unsigned char code)
1095 static void ti_interrupt_callback(struct urb *urb)
1097 struct ti_device *tdev = urb->context;
1098 struct usb_serial_port *port;
1099 struct usb_serial *serial = tdev->td_serial;
1100 struct ti_port *tport;
1101 struct device *dev = &urb->dev->dev;
1102 unsigned char *data = urb->transfer_buffer;
1103 int length = urb->actual_length;
1106 int status = urb->status;
1116 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1119 dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
1124 dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
1128 if (data[0] == TI_CODE_HARDWARE_ERROR) {
1129 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1133 port_number = ti_get_port_from_code(data[0]);
1134 function = ti_get_func_from_code(data[0]);
1136 dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
1137 __func__, port_number, function, data[1]);
1139 if (port_number >= serial->num_ports) {
1140 dev_err(dev, "%s - bad port number, %d\n",
1141 __func__, port_number);
1145 port = serial->port[port_number];
1147 tport = usb_get_serial_port_data(port);
1152 case TI_CODE_DATA_ERROR:
1153 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1154 __func__, port_number, data[1]);
1157 case TI_CODE_MODEM_STATUS:
1159 dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
1160 ti_handle_new_msr(tport, msr);
1164 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1170 retval = usb_submit_urb(urb, GFP_ATOMIC);
1172 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1177 static void ti_bulk_in_callback(struct urb *urb)
1179 struct ti_port *tport = urb->context;
1180 struct usb_serial_port *port = tport->tp_port;
1181 struct device *dev = &urb->dev->dev;
1182 int status = urb->status;
1183 unsigned long flags;
1192 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1195 dev_err(dev, "%s - nonzero urb status, %d\n",
1199 if (status == -EPIPE)
1203 dev_err(dev, "%s - stopping read!\n", __func__);
1207 if (urb->actual_length) {
1208 usb_serial_debug_data(dev, __func__, urb->actual_length,
1209 urb->transfer_buffer);
1211 if (!tport->tp_is_open)
1212 dev_dbg(dev, "%s - port closed, dropping data\n",
1215 ti_recv(port, urb->transfer_buffer, urb->actual_length);
1216 spin_lock_irqsave(&tport->tp_lock, flags);
1217 port->icount.rx += urb->actual_length;
1218 spin_unlock_irqrestore(&tport->tp_lock, flags);
1222 /* continue to read unless stopping */
1223 spin_lock_irqsave(&tport->tp_lock, flags);
1224 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1225 retval = usb_submit_urb(urb, GFP_ATOMIC);
1226 else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
1227 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1229 spin_unlock_irqrestore(&tport->tp_lock, flags);
1231 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1236 static void ti_bulk_out_callback(struct urb *urb)
1238 struct ti_port *tport = urb->context;
1239 struct usb_serial_port *port = tport->tp_port;
1240 int status = urb->status;
1242 tport->tp_write_urb_in_use = 0;
1250 dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
1253 dev_err_console(port, "%s - nonzero urb status, %d\n",
1257 /* send any buffered data */
1262 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
1268 cnt = tty_insert_flip_string(&port->port, data, length);
1270 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1271 __func__, length - cnt);
1275 tty_flip_buffer_push(&port->port);
1278 } while (length > 0);
1282 static void ti_send(struct ti_port *tport)
1285 struct usb_serial_port *port = tport->tp_port;
1286 unsigned long flags;
1288 spin_lock_irqsave(&tport->tp_lock, flags);
1290 if (tport->tp_write_urb_in_use)
1293 count = kfifo_out(&port->write_fifo,
1294 port->write_urb->transfer_buffer,
1295 port->bulk_out_size);
1300 tport->tp_write_urb_in_use = 1;
1302 spin_unlock_irqrestore(&tport->tp_lock, flags);
1304 usb_serial_debug_data(&port->dev, __func__, count,
1305 port->write_urb->transfer_buffer);
1307 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1308 usb_sndbulkpipe(port->serial->dev,
1309 port->bulk_out_endpointAddress),
1310 port->write_urb->transfer_buffer, count,
1311 ti_bulk_out_callback, tport);
1313 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1315 dev_err_console(port, "%s - submit write urb failed, %d\n",
1317 tport->tp_write_urb_in_use = 0;
1318 /* TODO: reschedule ti_send */
1320 spin_lock_irqsave(&tport->tp_lock, flags);
1321 port->icount.tx += count;
1322 spin_unlock_irqrestore(&tport->tp_lock, flags);
1325 /* more room in the buffer for new writes, wakeup */
1326 tty_port_tty_wakeup(&port->port);
1330 spin_unlock_irqrestore(&tport->tp_lock, flags);
1335 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1337 unsigned long flags;
1340 status = ti_write_byte(tport->tp_port, tport->tp_tdev,
1341 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1342 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1344 spin_lock_irqsave(&tport->tp_lock, flags);
1346 tport->tp_shadow_mcr = mcr;
1347 spin_unlock_irqrestore(&tport->tp_lock, flags);
1353 static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
1356 struct usb_serial_port *port = tport->tp_port;
1357 struct ti_port_status *data;
1359 size = sizeof(struct ti_port_status);
1360 data = kmalloc(size, GFP_KERNEL);
1364 status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size);
1367 "%s - get port status command failed, %d\n",
1372 dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
1382 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
1384 struct usb_serial_port *port = tty->driver_data;
1385 struct ti_port *tport = usb_get_serial_port_data(port);
1387 ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1391 static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
1393 struct async_icount *icount;
1394 struct tty_struct *tty;
1395 unsigned long flags;
1397 dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
1399 if (msr & TI_MSR_DELTA_MASK) {
1400 spin_lock_irqsave(&tport->tp_lock, flags);
1401 icount = &tport->tp_port->icount;
1402 if (msr & TI_MSR_DELTA_CTS)
1404 if (msr & TI_MSR_DELTA_DSR)
1406 if (msr & TI_MSR_DELTA_CD)
1408 if (msr & TI_MSR_DELTA_RI)
1410 wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
1411 spin_unlock_irqrestore(&tport->tp_lock, flags);
1414 tport->tp_msr = msr & TI_MSR_MASK;
1416 /* handle CTS flow control */
1417 tty = tty_port_tty_get(&tport->tp_port->port);
1418 if (tty && C_CRTSCTS(tty)) {
1419 if (msr & TI_MSR_CTS)
1426 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1428 unsigned long flags;
1430 spin_lock_irqsave(&tport->tp_lock, flags);
1432 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1433 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1435 spin_unlock_irqrestore(&tport->tp_lock, flags);
1439 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1443 unsigned long flags;
1445 spin_lock_irqsave(&tport->tp_lock, flags);
1447 if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1448 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1449 urb = tport->tp_port->read_urb;
1450 spin_unlock_irqrestore(&tport->tp_lock, flags);
1451 urb->context = tport;
1452 status = usb_submit_urb(urb, GFP_KERNEL);
1454 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1455 spin_unlock_irqrestore(&tport->tp_lock, flags);
1461 static int ti_command_out_sync(struct usb_device *udev, u8 command,
1462 u16 moduleid, u16 value, void *data, int size)
1466 status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command,
1467 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
1468 value, moduleid, data, size, 1000);
1475 static int ti_command_in_sync(struct usb_device *udev, u8 command,
1476 u16 moduleid, u16 value, void *data, int size)
1480 status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command,
1481 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
1482 value, moduleid, data, size, 1000);
1485 else if (status >= 0)
1491 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
1492 u16 value, void *data, int size)
1494 return ti_command_out_sync(port->serial->dev, command,
1495 TI_UART1_PORT + port->port_number,
1499 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
1500 u16 value, void *data, int size)
1502 return ti_command_in_sync(port->serial->dev, command,
1503 TI_UART1_PORT + port->port_number,
1507 static int ti_write_byte(struct usb_serial_port *port,
1508 struct ti_device *tdev, unsigned long addr,
1513 struct ti_write_data_bytes *data;
1515 dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
1518 size = sizeof(struct ti_write_data_bytes) + 2;
1519 data = kmalloc(size, GFP_KERNEL);
1523 data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1524 data->bDataType = TI_RW_DATA_BYTE;
1525 data->bDataCounter = 1;
1526 data->wBaseAddrHi = cpu_to_be16(addr>>16);
1527 data->wBaseAddrLo = cpu_to_be16(addr);
1528 data->bData[0] = mask;
1529 data->bData[1] = byte;
1531 status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA,
1532 TI_RAM_PORT, 0, data, size);
1534 dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
1541 static int ti_do_download(struct usb_device *dev, int pipe,
1542 u8 *buffer, int size)
1547 struct ti_firmware_header *header;
1551 for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1552 cs = (u8)(cs + buffer[pos]);
1554 header = (struct ti_firmware_header *)buffer;
1555 header->wLength = cpu_to_le16(size - sizeof(*header));
1556 header->bCheckSum = cs;
1558 dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
1559 for (pos = 0; pos < size; pos += done) {
1560 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1561 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1569 static int ti_download_firmware(struct ti_device *tdev)
1574 struct usb_device *dev = tdev->td_serial->dev;
1575 unsigned int pipe = usb_sndbulkpipe(dev,
1576 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1577 const struct firmware *fw_p;
1580 if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
1583 "moxa/moxa-%04x.fw",
1584 le16_to_cpu(dev->descriptor.idProduct));
1586 status = request_firmware(&fw_p, buf, &dev->dev);
1587 goto check_firmware;
1590 /* try ID specific firmware first, then try generic firmware */
1591 sprintf(buf, "ti_usb-v%04x-p%04x.fw",
1592 le16_to_cpu(dev->descriptor.idVendor),
1593 le16_to_cpu(dev->descriptor.idProduct));
1594 status = request_firmware(&fw_p, buf, &dev->dev);
1598 if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
1599 switch (le16_to_cpu(dev->descriptor.idProduct)) {
1600 case MTS_CDMA_PRODUCT_ID:
1601 strcpy(buf, "mts_cdma.fw");
1603 case MTS_GSM_PRODUCT_ID:
1604 strcpy(buf, "mts_gsm.fw");
1606 case MTS_EDGE_PRODUCT_ID:
1607 strcpy(buf, "mts_edge.fw");
1609 case MTS_MT9234MU_PRODUCT_ID:
1610 strcpy(buf, "mts_mt9234mu.fw");
1612 case MTS_MT9234ZBA_PRODUCT_ID:
1613 strcpy(buf, "mts_mt9234zba.fw");
1615 case MTS_MT9234ZBAOLD_PRODUCT_ID:
1616 strcpy(buf, "mts_mt9234zba.fw");
1619 if (buf[0] == '\0') {
1620 if (tdev->td_is_3410)
1621 strcpy(buf, "ti_3410.fw");
1623 strcpy(buf, "ti_5052.fw");
1625 status = request_firmware(&fw_p, buf, &dev->dev);
1630 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1633 if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1634 dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1635 release_firmware(fw_p);
1639 buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1640 buffer = kmalloc(buffer_size, GFP_KERNEL);
1642 memcpy(buffer, fw_p->data, fw_p->size);
1643 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1644 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1649 release_firmware(fw_p);
1651 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1656 dev_dbg(&dev->dev, "%s - download successful\n", __func__);