drivers/usb/serial/spcp8x5.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * spcp8x5 USB to serial adaptor driver
   4  *
   5  * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
   6  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
   7  * Copyright (C) 2006 S1 Corp.
   8  *
   9  * Original driver for 2.6.10 pl2303 driver by
  10  *   Greg Kroah-Hartman (greg@kroah.com)
  11  * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
  12  */
  13 #include <linux/kernel.h>
  14 #include <linux/errno.h>
  15 #include <linux/slab.h>
  16 #include <linux/tty.h>
  17 #include <linux/tty_driver.h>
  18 #include <linux/tty_flip.h>
  19 #include <linux/module.h>
  20 #include <linux/spinlock.h>
  21 #include <linux/usb.h>
  22 #include <linux/usb/serial.h>
  23
  24 #define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
  25
  26 #define SPCP825_QUIRK_NO_UART_STATUS    0x01
  27 #define SPCP825_QUIRK_NO_WORK_MODE      0x02
  28
  29 #define SPCP8x5_007_VID         0x04FC
  30 #define SPCP8x5_007_PID         0x0201
  31 #define SPCP8x5_008_VID         0x04fc
  32 #define SPCP8x5_008_PID         0x0235
  33 #define SPCP8x5_PHILIPS_VID     0x0471
  34 #define SPCP8x5_PHILIPS_PID     0x081e
  35 #define SPCP8x5_INTERMATIC_VID  0x04FC
  36 #define SPCP8x5_INTERMATIC_PID  0x0204
  37 #define SPCP8x5_835_VID         0x04fc
  38 #define SPCP8x5_835_PID         0x0231
  39
  40 static const struct usb_device_id id_table[] = {
  41         { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
  42         { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
  43         { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
  44         { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
  45         { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
  46           .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
  47                                 SPCP825_QUIRK_NO_WORK_MODE },
  48         { }                                     /* Terminating entry */
  49 };
  50 MODULE_DEVICE_TABLE(usb, id_table);
  51
  52 struct spcp8x5_usb_ctrl_arg {
  53         u8      type;
  54         u8      cmd;
  55         u8      cmd_type;
  56         u16     value;
  57         u16     index;
  58         u16     length;
  59 };
  60
  61
  62 /* spcp8x5 spec register define */
  63 #define MCR_CONTROL_LINE_RTS            0x02
  64 #define MCR_CONTROL_LINE_DTR            0x01
  65 #define MCR_DTR                         0x01
  66 #define MCR_RTS                         0x02
  67
  68 #define MSR_STATUS_LINE_DCD             0x80
  69 #define MSR_STATUS_LINE_RI              0x40
  70 #define MSR_STATUS_LINE_DSR             0x20
  71 #define MSR_STATUS_LINE_CTS             0x10
  72
  73 /* verdor command here , we should define myself */
  74 #define SET_DEFAULT                     0x40
  75 #define SET_DEFAULT_TYPE                0x20
  76
  77 #define SET_UART_FORMAT                 0x40
  78 #define SET_UART_FORMAT_TYPE            0x21
  79 #define SET_UART_FORMAT_SIZE_5          0x00
  80 #define SET_UART_FORMAT_SIZE_6          0x01
  81 #define SET_UART_FORMAT_SIZE_7          0x02
  82 #define SET_UART_FORMAT_SIZE_8          0x03
  83 #define SET_UART_FORMAT_STOP_1          0x00
  84 #define SET_UART_FORMAT_STOP_2          0x04
  85 #define SET_UART_FORMAT_PAR_NONE        0x00
  86 #define SET_UART_FORMAT_PAR_ODD         0x10
  87 #define SET_UART_FORMAT_PAR_EVEN        0x30
  88 #define SET_UART_FORMAT_PAR_MASK        0xD0
  89 #define SET_UART_FORMAT_PAR_SPACE       0x90
  90
  91 #define GET_UART_STATUS_TYPE            0xc0
  92 #define GET_UART_STATUS                 0x22
  93 #define GET_UART_STATUS_MSR             0x06
  94
  95 #define SET_UART_STATUS                 0x40
  96 #define SET_UART_STATUS_TYPE            0x23
  97 #define SET_UART_STATUS_MCR             0x0004
  98 #define SET_UART_STATUS_MCR_DTR         0x01
  99 #define SET_UART_STATUS_MCR_RTS         0x02
 100 #define SET_UART_STATUS_MCR_LOOP        0x10
 101
 102 #define SET_WORKING_MODE                0x40
 103 #define SET_WORKING_MODE_TYPE           0x24
 104 #define SET_WORKING_MODE_U2C            0x00
 105 #define SET_WORKING_MODE_RS485          0x01
 106 #define SET_WORKING_MODE_PDMA           0x02
 107 #define SET_WORKING_MODE_SPP            0x03
 108
 109 #define SET_FLOWCTL_CHAR                0x40
 110 #define SET_FLOWCTL_CHAR_TYPE           0x25
 111
 112 #define GET_VERSION                     0xc0
 113 #define GET_VERSION_TYPE                0x26
 114
 115 #define SET_REGISTER                    0x40
 116 #define SET_REGISTER_TYPE               0x27
 117
 118 #define GET_REGISTER                    0xc0
 119 #define GET_REGISTER_TYPE               0x28
 120
 121 #define SET_RAM                         0x40
 122 #define SET_RAM_TYPE                    0x31
 123
 124 #define GET_RAM                         0xc0
 125 #define GET_RAM_TYPE                    0x32
 126
 127 /* how come ??? */
 128 #define UART_STATE                      0x08
 129 #define UART_STATE_TRANSIENT_MASK       0x75
 130 #define UART_DCD                        0x01
 131 #define UART_DSR                        0x02
 132 #define UART_BREAK_ERROR                0x04
 133 #define UART_RING                       0x08
 134 #define UART_FRAME_ERROR                0x10
 135 #define UART_PARITY_ERROR               0x20
 136 #define UART_OVERRUN_ERROR              0x40
 137 #define UART_CTS                        0x80
 138
 139 struct spcp8x5_private {
 140         unsigned                quirks;
 141         spinlock_t              lock;
 142         u8                      line_control;
 143 };
 144
 145 static int spcp8x5_probe(struct usb_serial *serial,
 146                                                 const struct usb_device_id *id)
 147 {
 148         usb_set_serial_data(serial, (void *)id);
 149
 150         return 0;
 151 }
 152
 153 static int spcp8x5_port_probe(struct usb_serial_port *port)
 154 {
 155         const struct usb_device_id *id = usb_get_serial_data(port->serial);
 156         struct spcp8x5_private *priv;
 157
 158         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 159         if (!priv)
 160                 return -ENOMEM;
 161
 162         spin_lock_init(&priv->lock);
 163         priv->quirks = id->driver_info;
 164
 165         usb_set_serial_port_data(port, priv);
 166
 167         port->port.drain_delay = 256;
 168
 169         return 0;
 170 }
 171
 172 static void spcp8x5_port_remove(struct usb_serial_port *port)
 173 {
 174         struct spcp8x5_private *priv;
 175
 176         priv = usb_get_serial_port_data(port);
 177         kfree(priv);
 178 }
 179
 180 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
 181 {
 182         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 183         struct usb_device *dev = port->serial->dev;
 184         int retval;
 185
 186         if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 187                 return -EPERM;
 188
 189         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 190                                  SET_UART_STATUS_TYPE, SET_UART_STATUS,
 191                                  mcr, 0x04, NULL, 0, 100);
 192         if (retval != 0) {
 193                 dev_err(&port->dev, "failed to set control lines: %d\n",
 194                                                                 retval);
 195         }
 196         return retval;
 197 }
 198
 199 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 200 {
 201         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 202         struct usb_device *dev = port->serial->dev;
 203         u8 *buf;
 204         int ret;
 205
 206         if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 207                 return -EPERM;
 208
 209         buf = kzalloc(1, GFP_KERNEL);
 210         if (!buf)
 211                 return -ENOMEM;
 212
 213         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 214                               GET_UART_STATUS, GET_UART_STATUS_TYPE,
 215                               0, GET_UART_STATUS_MSR, buf, 1, 100);
 216         if (ret < 1) {
 217                 dev_err(&port->dev, "failed to get modem status: %d\n", ret);
 218                 if (ret >= 0)
 219                         ret = -EIO;
 220                 goto out;
 221         }
 222
 223         dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 224         *status = *buf;
 225         ret = 0;
 226 out:
 227         kfree(buf);
 228
 229         return ret;
 230 }
 231
 232 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
 233                                                                  u16 index)
 234 {
 235         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 236         struct usb_device *dev = port->serial->dev;
 237         int ret;
 238
 239         if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
 240                 return;
 241
 242         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 243                               SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
 244                               value, index, NULL, 0, 100);
 245         dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
 246         if (ret < 0)
 247                 dev_err(&port->dev, "failed to set work mode: %d\n", ret);
 248 }
 249
 250 static int spcp8x5_carrier_raised(struct usb_serial_port *port)
 251 {
 252         u8 msr;
 253         int ret;
 254
 255         ret = spcp8x5_get_msr(port, &msr);
 256         if (ret || msr & MSR_STATUS_LINE_DCD)
 257                 return 1;
 258
 259         return 0;
 260 }
 261
 262 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 263 {
 264         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 265         unsigned long flags;
 266         u8 control;
 267
 268         spin_lock_irqsave(&priv->lock, flags);
 269         if (on)
 270                 priv->line_control = MCR_CONTROL_LINE_DTR
 271                                                 | MCR_CONTROL_LINE_RTS;
 272         else
 273                 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
 274                                                 | MCR_CONTROL_LINE_RTS);
 275         control = priv->line_control;
 276         spin_unlock_irqrestore(&priv->lock, flags);
 277         spcp8x5_set_ctrl_line(port, control);
 278 }
 279
 280 static void spcp8x5_init_termios(struct tty_struct *tty)
 281 {
 282         tty_encode_baud_rate(tty, 115200, 115200);
 283 }
 284
 285 static void spcp8x5_set_termios(struct tty_struct *tty,
 286                 struct usb_serial_port *port, struct ktermios *old_termios)
 287 {
 288         struct usb_serial *serial = port->serial;
 289         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 290         unsigned long flags;
 291         unsigned int cflag = tty->termios.c_cflag;
 292         unsigned short uartdata;
 293         unsigned char buf[2] = {0, 0};
 294         int baud;
 295         int i;
 296         u8 control;
 297
 298         /* check that they really want us to change something */
 299         if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
 300                 return;
 301
 302         /* set DTR/RTS active */
 303         spin_lock_irqsave(&priv->lock, flags);
 304         control = priv->line_control;
 305         if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
 306                 priv->line_control |= MCR_DTR;
 307                 if (!(old_termios->c_cflag & CRTSCTS))
 308                         priv->line_control |= MCR_RTS;
 309         }
 310         if (control != priv->line_control) {
 311                 control = priv->line_control;
 312                 spin_unlock_irqrestore(&priv->lock, flags);
 313                 spcp8x5_set_ctrl_line(port, control);
 314         } else {
 315                 spin_unlock_irqrestore(&priv->lock, flags);
 316         }
 317
 318         /* Set Baud Rate */
 319         baud = tty_get_baud_rate(tty);
 320         switch (baud) {
 321         case 300:       buf[0] = 0x00;  break;
 322         case 600:       buf[0] = 0x01;  break;
 323         case 1200:      buf[0] = 0x02;  break;
 324         case 2400:      buf[0] = 0x03;  break;
 325         case 4800:      buf[0] = 0x04;  break;
 326         case 9600:      buf[0] = 0x05;  break;
 327         case 19200:     buf[0] = 0x07;  break;
 328         case 38400:     buf[0] = 0x09;  break;
 329         case 57600:     buf[0] = 0x0a;  break;
 330         case 115200:    buf[0] = 0x0b;  break;
 331         case 230400:    buf[0] = 0x0c;  break;
 332         case 460800:    buf[0] = 0x0d;  break;
 333         case 921600:    buf[0] = 0x0e;  break;
 334 /*      case 1200000:   buf[0] = 0x0f;  break; */
 335 /*      case 2400000:   buf[0] = 0x10;  break; */
 336         case 3000000:   buf[0] = 0x11;  break;
 337 /*      case 6000000:   buf[0] = 0x12;  break; */
 338         case 0:
 339         case 1000000:
 340                         buf[0] = 0x0b;  break;
 341         default:
 342                 dev_err(&port->dev, "unsupported baudrate, using 9600\n");
 343         }
 344
 345         /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
 346         switch (cflag & CSIZE) {
 347         case CS5:
 348                 buf[1] |= SET_UART_FORMAT_SIZE_5;
 349                 break;
 350         case CS6:
 351                 buf[1] |= SET_UART_FORMAT_SIZE_6;
 352                 break;
 353         case CS7:
 354                 buf[1] |= SET_UART_FORMAT_SIZE_7;
 355                 break;
 356         default:
 357         case CS8:
 358                 buf[1] |= SET_UART_FORMAT_SIZE_8;
 359                 break;
 360         }
 361
 362         /* Set Stop bit2 : 0:1bit 1:2bit */
 363         buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
 364                                      SET_UART_FORMAT_STOP_1;
 365
 366         /* Set Parity bit3-4 01:Odd 11:Even */
 367         if (cflag & PARENB) {
 368                 buf[1] |= (cflag & PARODD) ?
 369                 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
 370         } else {
 371                 buf[1] |= SET_UART_FORMAT_PAR_NONE;
 372         }
 373         uartdata = buf[0] | buf[1]<<8;
 374
 375         i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 376                             SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
 377                             uartdata, 0, NULL, 0, 100);
 378         if (i < 0)
 379                 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 380                         uartdata, i);
 381         dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
 382
 383         if (cflag & CRTSCTS) {
 384                 /* enable hardware flow control */
 385                 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
 386         }
 387 }
 388
 389 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 390 {
 391         struct usb_serial *serial = port->serial;
 392         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 393         int ret;
 394
 395         usb_clear_halt(serial->dev, port->write_urb->pipe);
 396         usb_clear_halt(serial->dev, port->read_urb->pipe);
 397
 398         ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 399                               0x09, 0x00,
 400                               0x01, 0x00, NULL, 0x00, 100);
 401         if (ret)
 402                 return ret;
 403
 404         spcp8x5_set_ctrl_line(port, priv->line_control);
 405
 406         if (tty)
 407                 spcp8x5_set_termios(tty, port, NULL);
 408
 409         return usb_serial_generic_open(tty, port);
 410 }
 411
 412 static int spcp8x5_tiocmset(struct tty_struct *tty,
 413                             unsigned int set, unsigned int clear)
 414 {
 415         struct usb_serial_port *port = tty->driver_data;
 416         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 417         unsigned long flags;
 418         u8 control;
 419
 420         spin_lock_irqsave(&priv->lock, flags);
 421         if (set & TIOCM_RTS)
 422                 priv->line_control |= MCR_RTS;
 423         if (set & TIOCM_DTR)
 424                 priv->line_control |= MCR_DTR;
 425         if (clear & TIOCM_RTS)
 426                 priv->line_control &= ~MCR_RTS;
 427         if (clear & TIOCM_DTR)
 428                 priv->line_control &= ~MCR_DTR;
 429         control = priv->line_control;
 430         spin_unlock_irqrestore(&priv->lock, flags);
 431
 432         return spcp8x5_set_ctrl_line(port, control);
 433 }
 434
 435 static int spcp8x5_tiocmget(struct tty_struct *tty)
 436 {
 437         struct usb_serial_port *port = tty->driver_data;
 438         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 439         unsigned long flags;
 440         unsigned int mcr;
 441         u8 status;
 442         unsigned int result;
 443
 444         result = spcp8x5_get_msr(port, &status);
 445         if (result)
 446                 return result;
 447
 448         spin_lock_irqsave(&priv->lock, flags);
 449         mcr = priv->line_control;
 450         spin_unlock_irqrestore(&priv->lock, flags);
 451
 452         result = ((mcr & MCR_DTR)                       ? TIOCM_DTR : 0)
 453                   | ((mcr & MCR_RTS)                    ? TIOCM_RTS : 0)
 454                   | ((status & MSR_STATUS_LINE_CTS)     ? TIOCM_CTS : 0)
 455                   | ((status & MSR_STATUS_LINE_DSR)     ? TIOCM_DSR : 0)
 456                   | ((status & MSR_STATUS_LINE_RI)      ? TIOCM_RI  : 0)
 457                   | ((status & MSR_STATUS_LINE_DCD)     ? TIOCM_CD  : 0);
 458
 459         return result;
 460 }
 461
 462 static struct usb_serial_driver spcp8x5_device = {
 463         .driver = {
 464                 .owner =        THIS_MODULE,
 465                 .name =         "SPCP8x5",
 466         },
 467         .id_table               = id_table,
 468         .num_ports              = 1,
 469         .num_bulk_in            = 1,
 470         .num_bulk_out           = 1,
 471         .open                   = spcp8x5_open,
 472         .dtr_rts                = spcp8x5_dtr_rts,
 473         .carrier_raised         = spcp8x5_carrier_raised,
 474         .set_termios            = spcp8x5_set_termios,
 475         .init_termios           = spcp8x5_init_termios,
 476         .tiocmget               = spcp8x5_tiocmget,
 477         .tiocmset               = spcp8x5_tiocmset,
 478         .probe                  = spcp8x5_probe,
 479         .port_probe             = spcp8x5_port_probe,
 480         .port_remove            = spcp8x5_port_remove,
 481 };
 482
 483 static struct usb_serial_driver * const serial_drivers[] = {
 484         &spcp8x5_device, NULL
 485 };
 486
 487 module_usb_serial_driver(serial_drivers, id_table);
 488
 489 MODULE_DESCRIPTION(DRIVER_DESC);
 490 MODULE_LICENSE("GPL");