Merge tag 'sound-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
[linux-2.6-microblaze.git] / drivers / usb / cdns3 / cdnsp-gadget.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Cadence CDNSP DRD Driver.
4  *
5  * Copyright (C) 2020 Cadence.
6  *
7  * Author: Pawel Laszczak <pawell@cadence.com>
8  *
9  * Code based on Linux XHCI driver.
10  * Origin: Copyright (C) 2008 Intel Corp.
11  */
12 #ifndef __LINUX_CDNSP_GADGET_H
13 #define __LINUX_CDNSP_GADGET_H
14
15 #include <linux/io-64-nonatomic-lo-hi.h>
16 #include <linux/usb/gadget.h>
17 #include <linux/irq.h>
18
19 /* Max number slots - only 1 is allowed. */
20 #define CDNSP_DEV_MAX_SLOTS     1
21
22 #define CDNSP_EP0_SETUP_SIZE    512
23
24 /* One control and 15 for in and 15 for out endpoints. */
25 #define CDNSP_ENDPOINTS_NUM     31
26
27 /* Best Effort Service Latency. */
28 #define CDNSP_DEFAULT_BESL      0
29
30 /* Device Controller command default timeout value in us */
31 #define CDNSP_CMD_TIMEOUT       (15 * 1000)
32
33 /* Up to 16 ms to halt an device controller */
34 #define CDNSP_MAX_HALT_USEC     (16 * 1000)
35
36 #define CDNSP_CTX_SIZE  2112
37
38 /*
39  * Controller register interface.
40  */
41
42 /**
43  * struct cdnsp_cap_regs - CDNSP Registers.
44  * @hc_capbase: Length of the capabilities register and controller
45  *              version number
46  * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
47  * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
48  * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
49  * @hcc_params: HCCPARAMS - Capability Parameters
50  * @db_off: DBOFF - Doorbell array offset
51  * @run_regs_off: RTSOFF - Runtime register space offset
52  * @hcc_params2: HCCPARAMS2 Capability Parameters 2,
53  */
54 struct cdnsp_cap_regs {
55         __le32 hc_capbase;
56         __le32 hcs_params1;
57         __le32 hcs_params2;
58         __le32 hcs_params3;
59         __le32 hcc_params;
60         __le32 db_off;
61         __le32 run_regs_off;
62         __le32 hcc_params2;
63         /* Reserved up to (CAPLENGTH - 0x1C) */
64 };
65
66 /* hc_capbase bitmasks. */
67 /* bits 7:0 - how long is the Capabilities register. */
68 #define HC_LENGTH(p)            (((p) >> 00) & GENMASK(7, 0))
69 /* bits 31:16   */
70 #define HC_VERSION(p)           (((p) >> 16) & GENMASK(15, 1))
71
72 /* HCSPARAMS1 - hcs_params1 - bitmasks */
73 /* bits 0:7, Max Device Endpoints */
74 #define HCS_ENDPOINTS_MASK      GENMASK(7, 0)
75 #define HCS_ENDPOINTS(p)        (((p) & HCS_ENDPOINTS_MASK) >> 0)
76
77 /* HCCPARAMS offset from PCI base address */
78 #define HCC_PARAMS_OFFSET       0x10
79
80 /* HCCPARAMS - hcc_params - bitmasks */
81 /* 1: device controller can use 64-bit address pointers. */
82 #define HCC_64BIT_ADDR(p)       ((p) & BIT(0))
83 /* 1: device controller uses 64-byte Device Context structures. */
84 #define HCC_64BYTE_CONTEXT(p)   ((p) & BIT(2))
85 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */
86 #define HCC_MAX_PSA(p)          ((((p) >> 12) & 0xf) + 1)
87 /* Extended Capabilities pointer from PCI base. */
88 #define HCC_EXT_CAPS(p)         (((p) & GENMASK(31, 16)) >> 16)
89
90 #define CTX_SIZE(_hcc)          (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
91
92 /* db_off bitmask - bits 0:1 reserved. */
93 #define DBOFF_MASK      GENMASK(31, 2)
94
95 /* run_regs_off bitmask - bits 0:4 reserved. */
96 #define RTSOFF_MASK     GENMASK(31, 5)
97
98 /**
99  * struct cdnsp_op_regs - Device Controller Operational Registers.
100  * @command: USBCMD - Controller command register.
101  * @status: USBSTS - Controller status register.
102  * @page_size: This indicates the page size that the device controller supports.
103  *             If bit n is set, the controller supports a page size of 2^(n+12),
104  *             up to a 128MB page size. 4K is the minimum page size.
105  * @dnctrl: DNCTRL - Device notification control register.
106  * @cmd_ring: CRP - 64-bit Command Ring Pointer.
107  * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer.
108  * @config_reg: CONFIG - Configure Register
109  * @port_reg_base: PORTSCn - base address for Port Status and Control
110  *                 Each port has a Port Status and Control register,
111  *                 followed by a Port Power Management Status and Control
112  *                 register, a Port Link Info register, and a reserved
113  *                 register.
114  */
115 struct cdnsp_op_regs {
116         __le32 command;
117         __le32 status;
118         __le32 page_size;
119         __le32 reserved1;
120         __le32 reserved2;
121         __le32 dnctrl;
122         __le64 cmd_ring;
123         /* rsvd: offset 0x20-2F. */
124         __le32 reserved3[4];
125         __le64 dcbaa_ptr;
126         __le32 config_reg;
127         /* rsvd: offset 0x3C-3FF. */
128         __le32 reserved4[241];
129         /* port 1 registers, which serve as a base address for other ports. */
130         __le32 port_reg_base;
131 };
132
133 /* Number of registers per port. */
134 #define NUM_PORT_REGS   4
135
136 /**
137  * struct cdnsp_port_regs - Port Registers.
138  * @portsc: PORTSC - Port Status and Control Register.
139  * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register.
140  * @portli: PORTLI - Port Link Info register.
141  */
142 struct cdnsp_port_regs {
143         __le32 portsc;
144         __le32 portpmsc;
145         __le32 portli;
146         __le32 reserved;
147 };
148
149 /*
150  * These bits are Read Only (RO) and should be saved and written to the
151  * registers: 0 (connect status) and  10:13 (port speed).
152  * These bits are also sticky - meaning they're in the AUX well and they aren't
153  * changed by a hot and warm.
154  */
155 #define CDNSP_PORT_RO   (PORT_CONNECT | DEV_SPEED_MASK)
156
157 /*
158  * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
159  * bits 5:8 (link state), 25:26  ("wake on" enable state)
160  */
161 #define CDNSP_PORT_RWS  (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E)
162
163 /*
164  * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
165  * bits 1 (port enable/disable), 17  ( connect changed),
166  * 21 (port reset changed) , 22 (Port Link State Change),
167  */
168 #define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC)
169
170 /* USBCMD - USB command - bitmasks. */
171 /* Run/Stop, controller execution - do not write unless controller is halted.*/
172 #define CMD_R_S         BIT(0)
173 /*
174  * Reset device controller - resets internal controller state machine and all
175  * registers (except PCI config regs).
176  */
177 #define CMD_RESET       BIT(1)
178 /* Event Interrupt Enable - a '1' allows interrupts from the controller. */
179 #define CMD_INTE        BIT(2)
180 /*
181  * Device System Error Interrupt Enable - get out-of-band signal for
182  * controller errors.
183  */
184 #define CMD_DSEIE       BIT(3)
185 /* device controller save/restore state. */
186 #define CMD_CSS         BIT(8)
187 #define CMD_CRS         BIT(9)
188 /*
189  * Enable Wrap Event - '1' means device controller generates an event
190  * when MFINDEX wraps.
191  */
192 #define CMD_EWE         BIT(10)
193 /* 1: device enabled */
194 #define CMD_DEVEN       BIT(17)
195 /* bits 18:31 are reserved (and should be preserved on writes). */
196
197 /* Command register values to disable interrupts. */
198 #define CDNSP_IRQS      (CMD_INTE | CMD_DSEIE | CMD_EWE)
199
200 /* USBSTS - USB status - bitmasks */
201 /* controller not running - set to 1 when run/stop bit is cleared. */
202 #define STS_HALT        BIT(0)
203 /*
204  * serious error, e.g. PCI parity error. The controller will clear
205  * the run/stop bit.
206  */
207 #define STS_FATAL       BIT(2)
208 /* event interrupt - clear this prior to clearing any IP flags in IR set.*/
209 #define STS_EINT        BIT(3)
210 /* port change detect */
211 #define STS_PCD         BIT(4)
212 /* save state status - '1' means device controller is saving state. */
213 #define STS_SSS         BIT(8)
214 /* restore state status - '1' means controllers is restoring state. */
215 #define STS_RSS         BIT(9)
216 /* 1: save or restore error */
217 #define STS_SRE         BIT(10)
218 /* 1: device Not Ready to accept doorbell or op reg writes after reset. */
219 #define STS_CNR         BIT(11)
220 /* 1: internal Device Controller Error.*/
221 #define STS_HCE         BIT(12)
222
223 /* CRCR - Command Ring Control Register - cmd_ring bitmasks. */
224 /* bit 0 is the command ring cycle state. */
225 #define CMD_RING_CS             BIT(0)
226 /* stop ring immediately - abort the currently executing command. */
227 #define CMD_RING_ABORT          BIT(2)
228 /*
229  * Command Ring Busy.
230  * Set when Doorbell register is written with DB for command and cleared when
231  * the controller reached end of CR.
232  */
233 #define CMD_RING_BUSY(p)        ((p) & BIT(4))
234 /* 1: command ring is running */
235 #define CMD_RING_RUNNING        BIT(3)
236 /* Command Ring pointer - bit mask for the lower 32 bits. */
237 #define CMD_RING_RSVD_BITS      GENMASK(5, 0)
238
239 /* CONFIG - Configure Register - config_reg bitmasks. */
240 /* bits 0:7 - maximum number of device slots enabled. */
241 #define MAX_DEVS                GENMASK(7, 0)
242 /* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */
243 #define CONFIG_U3E              BIT(8)
244
245 /* PORTSC - Port Status and Control Register - port_reg_base bitmasks */
246 /* 1: device connected. */
247 #define PORT_CONNECT            BIT(0)
248 /* 1: port enabled. */
249 #define PORT_PED                BIT(1)
250 /* 1: port reset signaling asserted. */
251 #define PORT_RESET              BIT(4)
252 /*
253  * Port Link State - bits 5:8
254  * A read gives the current link PM state of the port,
255  * a write with Link State Write Strobe sets the link state.
256  */
257 #define PORT_PLS_MASK           GENMASK(8, 5)
258 #define XDEV_U0                 (0x0 << 5)
259 #define XDEV_U1                 (0x1 << 5)
260 #define XDEV_U2                 (0x2 << 5)
261 #define XDEV_U3                 (0x3 << 5)
262 #define XDEV_DISABLED           (0x4 << 5)
263 #define XDEV_RXDETECT           (0x5 << 5)
264 #define XDEV_INACTIVE           (0x6 << 5)
265 #define XDEV_POLLING            (0x7 << 5)
266 #define XDEV_RECOVERY           (0x8 << 5)
267 #define XDEV_HOT_RESET          (0x9 << 5)
268 #define XDEV_COMP_MODE          (0xa << 5)
269 #define XDEV_TEST_MODE          (0xb << 5)
270 #define XDEV_RESUME             (0xf << 5)
271 /* 1: port has power. */
272 #define PORT_POWER              BIT(9)
273 /*
274  * bits 10:13 indicate device speed:
275  * 0 - undefined speed - port hasn't be initialized by a reset yet
276  * 1 - full speed
277  * 2 - Reserved (Low Speed not supported
278  * 3 - high speed
279  * 4 - super speed
280  * 5 - super speed
281  * 6-15 reserved
282  */
283 #define DEV_SPEED_MASK          GENMASK(13, 10)
284 #define XDEV_FS                 (0x1 << 10)
285 #define XDEV_HS                 (0x3 << 10)
286 #define XDEV_SS                 (0x4 << 10)
287 #define XDEV_SSP                (0x5 << 10)
288 #define DEV_UNDEFSPEED(p)       (((p) & DEV_SPEED_MASK) == (0x0 << 10))
289 #define DEV_FULLSPEED(p)        (((p) & DEV_SPEED_MASK) == XDEV_FS)
290 #define DEV_HIGHSPEED(p)        (((p) & DEV_SPEED_MASK) == XDEV_HS)
291 #define DEV_SUPERSPEED(p)       (((p) & DEV_SPEED_MASK) == XDEV_SS)
292 #define DEV_SUPERSPEEDPLUS(p)   (((p) & DEV_SPEED_MASK) == XDEV_SSP)
293 #define DEV_SUPERSPEED_ANY(p)   (((p) & DEV_SPEED_MASK) >= XDEV_SS)
294 #define DEV_PORT_SPEED(p)       (((p) >> 10) & 0x0f)
295 /* Port Link State Write Strobe - set this when changing link state */
296 #define PORT_LINK_STROBE        BIT(16)
297 /* 1: connect status change */
298 #define PORT_CSC                BIT(17)
299 /* 1: warm reset for a USB 3.0 device is done. */
300 #define PORT_WRC                BIT(19)
301 /* 1: reset change - 1 to 0 transition of PORT_RESET */
302 #define PORT_RC                 BIT(21)
303 /*
304  * port link status change - set on some port link state transitions:
305  * Transition                   Reason
306  * ----------------------------------------------------------------------------
307  * - U3 to Resume               Wakeup signaling from a device
308  * - Resume to Recovery to U0   USB 3.0 device resume
309  * - Resume to U0               USB 2.0 device resume
310  * - U3 to Recovery to U0       Software resume of USB 3.0 device complete
311  * - U3 to U0                   Software resume of USB 2.0 device complete
312  * - U2 to U0                   L1 resume of USB 2.1 device complete
313  * - U0 to U0                   L1 entry rejection by USB 2.1 device
314  * - U0 to disabled             L1 entry error with USB 2.1 device
315  * - Any state to inactive      Error on USB 3.0 port
316  */
317 #define PORT_PLC                BIT(22)
318 /* Port configure error change - port failed to configure its link partner. */
319 #define PORT_CEC                BIT(23)
320 /* Wake on connect (enable). */
321 #define PORT_WKCONN_E           BIT(25)
322 /* Wake on disconnect (enable). */
323 #define PORT_WKDISC_E           BIT(26)
324 /* Indicates if Warm Reset is being received. */
325 #define PORT_WR                 BIT(31)
326
327 #define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC)
328
329 /* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */
330 /*  Enables U1 entry. */
331 #define PORT_U1_TIMEOUT_MASK    GENMASK(7, 0)
332 #define PORT_U1_TIMEOUT(p)      ((p) & PORT_U1_TIMEOUT_MASK)
333 /* Enables U2 entry .*/
334 #define PORT_U2_TIMEOUT_MASK    GENMASK(14, 8)
335 #define PORT_U2_TIMEOUT(p)      (((p) << 8) & PORT_U2_TIMEOUT_MASK)
336
337 /* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */
338 #define PORT_L1S_MASK           GENMASK(2, 0)
339 #define PORT_L1S(p)             ((p) & PORT_L1S_MASK)
340 #define PORT_L1S_ACK            PORT_L1S(1)
341 #define PORT_L1S_NYET           PORT_L1S(2)
342 #define PORT_L1S_STALL          PORT_L1S(3)
343 #define PORT_L1S_TIMEOUT        PORT_L1S(4)
344 /* Remote Wake Enable. */
345 #define PORT_RWE                BIT(3)
346 /* Best Effort Service Latency (BESL). */
347 #define PORT_BESL(p)            (((p) << 4) & GENMASK(7, 4))
348 /* Hardware LPM Enable (HLE). */
349 #define PORT_HLE                BIT(16)
350 /* Received Best Effort Service Latency (BESL). */
351 #define PORT_RRBESL(p)          (((p) & GENMASK(20, 17)) >> 17)
352 /* Port Test Control. */
353 #define PORT_TEST_MODE_MASK     GENMASK(31, 28)
354 #define PORT_TEST_MODE(p)       (((p) << 28) & PORT_TEST_MODE_MASK)
355
356 /**
357  * struct cdnsp_intr_reg - Interrupt Register Set.
358  * @irq_pending: IMAN - Interrupt Management Register. Used to enable
359  *               interrupts and check for pending interrupts.
360  * @irq_control: IMOD - Interrupt Moderation Register.
361  *               Used to throttle interrupts.
362  * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
363  * @erst_base: ERST base address.
364  * @erst_dequeue: Event ring dequeue pointer.
365  *
366  * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
367  * Ring Segment Table (ERST) associated with it. The event ring is comprised of
368  * multiple segments of the same size. The controller places events on the ring
369  * and "updates the Cycle bit in the TRBs to indicate to software the current
370  * position of the Enqueue Pointer." The driver processes those events and
371  * updates the dequeue pointer.
372  */
373 struct cdnsp_intr_reg {
374         __le32 irq_pending;
375         __le32 irq_control;
376         __le32 erst_size;
377         __le32 rsvd;
378         __le64 erst_base;
379         __le64 erst_dequeue;
380 };
381
382 /* IMAN - Interrupt Management Register - irq_pending bitmasks l. */
383 #define IMAN_IE                 BIT(1)
384 #define IMAN_IP                 BIT(0)
385 /* bits 2:31 need to be preserved */
386 #define IMAN_IE_SET(p)          (((p) & IMAN_IE) | 0x2)
387 #define IMAN_IE_CLEAR(p)        (((p) & IMAN_IE) & ~(0x2))
388
389 /* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
390 /*
391  * Minimum interval between interrupts (in 250ns intervals). The interval
392  * between interrupts will be longer if there are no events on the event ring.
393  * Default is 4000 (1 ms).
394  */
395 #define IMOD_INTERVAL_MASK      GENMASK(15, 0)
396 /* Counter used to count down the time to the next interrupt - HW use only */
397 #define IMOD_COUNTER_MASK       GENMASK(31, 16)
398 #define IMOD_DEFAULT_INTERVAL   0
399
400 /* erst_size bitmasks. */
401 /* Preserve bits 16:31 of erst_size. */
402 #define ERST_SIZE_MASK          GENMASK(31, 16)
403
404 /* erst_dequeue bitmasks. */
405 /*
406  * Dequeue ERST Segment Index (DESI) - Segment number (or alias)
407  * where the current dequeue pointer lies. This is an optional HW hint.
408  */
409 #define ERST_DESI_MASK          GENMASK(2, 0)
410 /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */
411 #define ERST_EHB                BIT(3)
412 #define ERST_PTR_MASK           GENMASK(3, 0)
413
414 /**
415  * struct cdnsp_run_regs
416  * @microframe_index: MFINDEX - current microframe number.
417  * @ir_set: Array of Interrupter registers.
418  *
419  * Device Controller Runtime Registers:
420  * "Software should read and write these registers using only Dword (32 bit)
421  * or larger accesses"
422  */
423 struct cdnsp_run_regs {
424         __le32 microframe_index;
425         __le32 rsvd[7];
426         struct cdnsp_intr_reg ir_set[128];
427 };
428
429 /**
430  * USB2.0 Port Peripheral Configuration Registers.
431  * @ext_cap: Header register for Extended Capability.
432  * @port_reg1: Timer Configuration Register.
433  * @port_reg2: Timer Configuration Register.
434  * @port_reg3: Timer Configuration Register.
435  * @port_reg4: Timer Configuration Register.
436  * @port_reg5: Timer Configuration Register.
437  * @port_reg6: Chicken bits for USB20PPP.
438  */
439 struct cdnsp_20port_cap {
440         __le32 ext_cap;
441         __le32 port_reg1;
442         __le32 port_reg2;
443         __le32 port_reg3;
444         __le32 port_reg4;
445         __le32 port_reg5;
446         __le32 port_reg6;
447 };
448
449 /* Extended capability register fields */
450 #define EXT_CAPS_ID(p)                  (((p) >> 0) & GENMASK(7, 0))
451 #define EXT_CAPS_NEXT(p)                (((p) >> 8) & GENMASK(7, 0))
452 /* Extended capability IDs - ID 0 reserved */
453 #define EXT_CAPS_PROTOCOL               2
454
455 /* USB 2.0 Port Peripheral Configuration Extended Capability */
456 #define EXT_CAP_CFG_DEV_20PORT_CAP_ID   0xC1
457 /*
458  * Setting this bit to '1' enables automatic wakeup from L1 state on transfer
459  * TRB prepared when USBSSP operates in USB2.0 mode.
460  */
461 #define PORT_REG6_L1_L0_HW_EN           BIT(1)
462 /*
463  * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0
464  * mode (disables High Speed).
465  */
466 #define PORT_REG6_FORCE_FS              BIT(0)
467
468 /**
469  * USB3.x Port Peripheral Configuration Registers.
470  * @ext_cap: Header register for Extended Capability.
471  * @mode_addr: Miscellaneous 3xPORT operation mode configuration register.
472  * @mode_2: 3x Port Control Register 2.
473  */
474 struct cdnsp_3xport_cap {
475         __le32 ext_cap;
476         __le32 mode_addr;
477         __le32 reserved[52];
478         __le32 mode_2;
479 };
480
481 /* Extended Capability Header for 3XPort Configuration Registers. */
482 #define D_XEC_CFG_3XPORT_CAP            0xC0
483 #define CFG_3XPORT_SSP_SUPPORT          BIT(31)
484 #define CFG_3XPORT_U1_PIPE_CLK_GATE_EN  BIT(0)
485
486 /* Revision Extended Capability ID */
487 #define RTL_REV_CAP                     0xC4
488 #define RTL_REV_CAP_RX_BUFF_CMD_SIZE    BITMASK(31, 24)
489 #define RTL_REV_CAP_RX_BUFF_SIZE        BITMASK(15, 0)
490 #define RTL_REV_CAP_TX_BUFF_CMD_SIZE    BITMASK(31, 24)
491 #define RTL_REV_CAP_TX_BUFF_SIZE        BITMASK(15, 0)
492
493 #define CDNSP_VER_1 0x00000000
494 #define CDNSP_VER_2 0x10000000
495
496 #define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \
497                          (readl(&(pdev)->rev_cap->ep_supported) & \
498                          (BIT(ep_num) << ((dir) ? 0 : 16)))
499
500 /**
501  * struct cdnsp_rev_cap - controller capabilities.
502  * @ext_cap: Header for RTL Revision Extended Capability.
503  * @rtl_revision: RTL revision.
504  * @rx_buff_size: Rx buffer sizes.
505  * @tx_buff_size: Tx buffer sizes.
506  * @ep_supported: Supported endpoints.
507  * @ctrl_revision: Controller revision ID.
508  */
509 struct cdnsp_rev_cap {
510         __le32 ext_cap;
511         __le32 rtl_revision;
512         __le32 rx_buff_size;
513         __le32 tx_buff_size;
514         __le32 ep_supported;
515         __le32 ctrl_revision;
516 };
517
518 /* USB2.0 Port Peripheral Configuration Registers. */
519 #define D_XEC_PRE_REGS_CAP              0xC8
520 #define REG_CHICKEN_BITS_2_OFFSET       0x48
521 #define CHICKEN_XDMA_2_TP_CACHE_DIS     BIT(28)
522
523 /* XBUF Extended Capability ID. */
524 #define XBUF_CAP_ID                     0xCB
525 #define XBUF_RX_TAG_MASK_0_OFFSET       0x1C
526 #define XBUF_RX_TAG_MASK_1_OFFSET       0x24
527 #define XBUF_TX_CMD_OFFSET              0x2C
528
529 /**
530  * struct cdnsp_doorbell_array.
531  * @cmd_db: Command ring doorbell register.
532  * @ep_db: Endpoint ring doorbell register.
533  *         Bits 0 - 7: Endpoint target.
534  *         Bits 8 - 15: RsvdZ.
535  *         Bits 16 - 31: Stream ID.
536  */
537 struct cdnsp_doorbell_array {
538         __le32 cmd_db;
539         __le32 ep_db;
540 };
541
542 #define DB_VALUE(ep, stream)            ((((ep) + 1) & 0xff) | ((stream) << 16))
543 #define DB_VALUE_EP0_OUT(ep, stream)    ((ep) & 0xff)
544 #define DB_VALUE_CMD                    0x00000000
545
546 /**
547  * struct cdnsp_container_ctx.
548  * @type: Type of context. Used to calculated offsets to contained contexts.
549  * @size: Size of the context data.
550  * @ctx_size: context data structure size - 64 or 32 bits.
551  * @dma: dma address of the bytes.
552  * @bytes: The raw context data given to HW.
553  *
554  * Represents either a Device or Input context. Holds a pointer to the raw
555  * memory used for the context (bytes) and dma address of it (dma).
556  */
557 struct cdnsp_container_ctx {
558         unsigned int type;
559 #define CDNSP_CTX_TYPE_DEVICE   0x1
560 #define CDNSP_CTX_TYPE_INPUT    0x2
561         int size;
562         int ctx_size;
563         dma_addr_t dma;
564         u8 *bytes;
565 };
566
567 /**
568  * struct cdnsp_slot_ctx
569  * @dev_info: Device speed, and last valid endpoint.
570  * @dev_port: Device port number that is needed to access the USB device.
571  * @int_target: Interrupter target number.
572  * @dev_state: Slot state and device address.
573  *
574  * Slot Context - This assumes the controller uses 32-byte context
575  * structures. If the controller uses 64-byte contexts, there is an additional
576  * 32 bytes reserved at the end of the slot context for controller internal use.
577  */
578 struct cdnsp_slot_ctx {
579         __le32 dev_info;
580         __le32 dev_port;
581         __le32 int_target;
582         __le32 dev_state;
583         /* offset 0x10 to 0x1f reserved for controller internal use. */
584         __le32 reserved[4];
585 };
586
587 /* Bits 20:23 in the Slot Context are the speed for the device. */
588 #define SLOT_SPEED_FS           (XDEV_FS << 10)
589 #define SLOT_SPEED_HS           (XDEV_HS << 10)
590 #define SLOT_SPEED_SS           (XDEV_SS << 10)
591 #define SLOT_SPEED_SSP          (XDEV_SSP << 10)
592
593 /* dev_info bitmasks. */
594 /* Device speed - values defined by PORTSC Device Speed field - 20:23. */
595 #define DEV_SPEED               GENMASK(23, 20)
596 #define GET_DEV_SPEED(n)        (((n) & DEV_SPEED) >> 20)
597 /* Index of the last valid endpoint context in this device context - 27:31. */
598 #define LAST_CTX_MASK           ((unsigned int)GENMASK(31, 27))
599 #define LAST_CTX(p)             ((p) << 27)
600 #define LAST_CTX_TO_EP_NUM(p)   (((p) >> 27) - 1)
601 #define SLOT_FLAG               BIT(0)
602 #define EP0_FLAG                BIT(1)
603
604 /* dev_port bitmasks */
605 /* Device port number that is needed to access the USB device. */
606 #define DEV_PORT(p)             (((p) & 0xff) << 16)
607
608 /* dev_state bitmasks */
609 /* USB device address - assigned by the controller. */
610 #define DEV_ADDR_MASK           GENMASK(7, 0)
611 /* Slot state */
612 #define SLOT_STATE              GENMASK(31, 27)
613 #define GET_SLOT_STATE(p)       (((p) & SLOT_STATE) >> 27)
614
615 #define SLOT_STATE_DISABLED     0
616 #define SLOT_STATE_ENABLED      SLOT_STATE_DISABLED
617 #define SLOT_STATE_DEFAULT      1
618 #define SLOT_STATE_ADDRESSED    2
619 #define SLOT_STATE_CONFIGURED   3
620
621 /**
622  * struct cdnsp_ep_ctx.
623  * @ep_info: Endpoint state, streams, mult, and interval information.
624  * @ep_info2: Information on endpoint type, max packet size, max burst size,
625  *            error count, and whether the controller will force an event for
626  *            all transactions.
627  * @deq: 64-bit ring dequeue pointer address. If the endpoint only
628  *       defines one stream, this points to the endpoint transfer ring.
629  *       Otherwise, it points to a stream context array, which has a
630  *       ring pointer for each flow.
631  * @tx_info: Average TRB lengths for the endpoint ring and
632  *           max payload within an Endpoint Service Interval Time (ESIT).
633  *
634  * Endpoint Context - This assumes the controller uses 32-byte context
635  * structures. If the controller uses 64-byte contexts, there is an additional
636  * 32 bytes reserved at the end of the endpoint context for controller internal
637  * use.
638  */
639 struct cdnsp_ep_ctx {
640         __le32 ep_info;
641         __le32 ep_info2;
642         __le64 deq;
643         __le32 tx_info;
644         /* offset 0x14 - 0x1f reserved for controller internal use. */
645         __le32 reserved[3];
646 };
647
648 /* ep_info bitmasks. */
649 /*
650  * Endpoint State - bits 0:2:
651  * 0 - disabled
652  * 1 - running
653  * 2 - halted due to halt condition
654  * 3 - stopped
655  * 4 - TRB error
656  * 5-7 - reserved
657  */
658 #define EP_STATE_MASK           GENMASK(3, 0)
659 #define EP_STATE_DISABLED       0
660 #define EP_STATE_RUNNING        1
661 #define EP_STATE_HALTED         2
662 #define EP_STATE_STOPPED        3
663 #define EP_STATE_ERROR          4
664 #define GET_EP_CTX_STATE(ctx)   (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
665
666 /* Mult - Max number of burst within an interval, in EP companion desc. */
667 #define EP_MULT(p)                      (((p) << 8) & GENMASK(9, 8))
668 #define CTX_TO_EP_MULT(p)               (((p) & GENMASK(9, 8)) >> 8)
669 /* bits 10:14 are Max Primary Streams. */
670 /* bit 15 is Linear Stream Array. */
671 /* Interval - period between requests to an endpoint - 125u increments. */
672 #define EP_INTERVAL(p)                  (((p) << 16) & GENMASK(23, 16))
673 #define EP_INTERVAL_TO_UFRAMES(p)       (1 << (((p) & GENMASK(23, 16)) >> 16))
674 #define CTX_TO_EP_INTERVAL(p)           (((p) & GENMASK(23, 16)) >> 16)
675 #define EP_MAXPSTREAMS_MASK             GENMASK(14, 10)
676 #define EP_MAXPSTREAMS(p)               (((p) << 10) & EP_MAXPSTREAMS_MASK)
677 #define CTX_TO_EP_MAXPSTREAMS(p)        (((p) & EP_MAXPSTREAMS_MASK) >> 10)
678 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
679 #define EP_HAS_LSA                      BIT(15)
680
681 /* ep_info2 bitmasks */
682 #define ERROR_COUNT(p)          (((p) & 0x3) << 1)
683 #define CTX_TO_EP_TYPE(p)       (((p) >> 3) & 0x7)
684 #define EP_TYPE(p)              ((p) << 3)
685 #define ISOC_OUT_EP             1
686 #define BULK_OUT_EP             2
687 #define INT_OUT_EP              3
688 #define CTRL_EP                 4
689 #define ISOC_IN_EP              5
690 #define BULK_IN_EP              6
691 #define INT_IN_EP               7
692 /* bit 6 reserved. */
693 /* bit 7 is Device Initiate Disable - for disabling stream selection. */
694 #define MAX_BURST(p)            (((p) << 8) & GENMASK(15, 8))
695 #define CTX_TO_MAX_BURST(p)     (((p) & GENMASK(15, 8)) >> 8)
696 #define MAX_PACKET(p)           (((p) << 16) & GENMASK(31, 16))
697 #define MAX_PACKET_MASK         GENMASK(31, 16)
698 #define MAX_PACKET_DECODED(p)   (((p) & GENMASK(31, 16)) >> 16)
699
700 /* tx_info bitmasks. */
701 #define EP_AVG_TRB_LENGTH(p)            ((p) & GENMASK(15, 0))
702 #define EP_MAX_ESIT_PAYLOAD_LO(p)       (((p) << 16) & GENMASK(31, 16))
703 #define EP_MAX_ESIT_PAYLOAD_HI(p)       ((((p) & GENMASK(23, 16)) >> 16) << 24)
704 #define CTX_TO_MAX_ESIT_PAYLOAD_LO(p)   (((p) & GENMASK(31, 16)) >> 16)
705 #define CTX_TO_MAX_ESIT_PAYLOAD_HI(p)   (((p) & GENMASK(31, 24)) >> 24)
706
707 /* deq bitmasks. */
708 #define EP_CTX_CYCLE_MASK               BIT(0)
709 #define CTX_DEQ_MASK                    (~0xfL)
710
711 /**
712  * struct cdnsp_input_control_context
713  * Input control context;
714  *
715  * @drop_context: Set the bit of the endpoint context you want to disable.
716  * @add_context: Set the bit of the endpoint context you want to enable.
717  */
718 struct cdnsp_input_control_ctx {
719         __le32 drop_flags;
720         __le32 add_flags;
721         __le32 rsvd2[6];
722 };
723
724 /**
725  * Represents everything that is needed to issue a command on the command ring.
726  *
727  * @in_ctx: Pointer to input context structure.
728  * @status: Command Completion Code for last command.
729  * @command_trb: Pointer to command TRB.
730  */
731 struct cdnsp_command {
732         /* Input context for changing device state. */
733         struct cdnsp_container_ctx *in_ctx;
734         u32 status;
735         union cdnsp_trb *command_trb;
736 };
737
738 /**
739  * Stream context structure.
740  *
741  * @stream_ring: 64-bit stream ring address, cycle state, and stream type.
742  * @reserved: offset 0x14 - 0x1f reserved for controller internal use.
743  */
744 struct cdnsp_stream_ctx {
745         __le64 stream_ring;
746         __le32 reserved[2];
747 };
748
749 /* Stream Context Types - bits 3:1 of stream ctx deq ptr. */
750 #define SCT_FOR_CTX(p)          (((p) << 1) & GENMASK(3, 1))
751 /* Secondary stream array type, dequeue pointer is to a transfer ring. */
752 #define SCT_SEC_TR              0
753 /* Primary stream array type, dequeue pointer is to a transfer ring. */
754 #define SCT_PRI_TR              1
755
756 /**
757  *  struct cdnsp_stream_info: Representing everything that is needed to
758  *                            supports stream capable endpoints.
759  *  @stream_rings: Array of pointers containing Transfer rings for all
760  *                 supported streams.
761  *  @num_streams: Number of streams, including stream 0.
762  *  @stream_ctx_array: The stream context array may be bigger than the number
763  *                     of streams the driver asked for.
764  *  @num_stream_ctxs: Number of streams.
765  *  @ctx_array_dma: Dma address of Context Stream Array.
766  *  @trb_address_map: For mapping physical TRB addresses to segments in
767  *                    stream rings.
768  *  @td_count: Number of TDs associated with endpoint.
769  *  @first_prime_det: First PRIME packet detected.
770  *  @drbls_count: Number of allowed doorbells.
771  */
772 struct cdnsp_stream_info {
773         struct cdnsp_ring **stream_rings;
774         unsigned int num_streams;
775         struct cdnsp_stream_ctx *stream_ctx_array;
776         unsigned int num_stream_ctxs;
777         dma_addr_t ctx_array_dma;
778         struct radix_tree_root trb_address_map;
779         int td_count;
780         u8 first_prime_det;
781 #define STREAM_DRBL_FIFO_DEPTH 2
782         u8 drbls_count;
783 };
784
785 #define STREAM_LOG_STREAMS 4
786 #define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS)
787
788 #if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1
789 #error "Not suupported stream value"
790 #endif
791
792 /**
793  * struct cdnsp_ep - extended device side representation of USB endpoint.
794  * @endpoint: usb endpoint
795  * @pending_req_list: List of requests queuing on transfer ring.
796  * @pdev: Device associated with this endpoint.
797  * @number: Endpoint number (1 - 15).
798  * idx: The device context index (DCI).
799  * interval: Interval between packets used for ISOC endpoint.
800  * @name: A human readable name e.g. ep1out.
801  * @direction: Endpoint direction.
802  * @buffering: Number of on-chip buffers related to endpoint.
803  * @buffering_period; Number of on-chip buffers related to periodic endpoint.
804  * @in_ctx: Pointer to input endpoint context structure.
805  * @out_ctx: Pointer to output endpoint context structure.
806  * @ring: Pointer to transfer ring.
807  * @stream_info: Hold stream information.
808  * @ep_state: Current state of endpoint.
809  * @skip: Sometimes the controller can not process isochronous endpoint ring
810  *        quickly enough, and it will miss some isoc tds on the ring and
811  *        generate Missed Service Error Event.
812  *        Set skip flag when receive a Missed Service Error Event and
813  *        process the missed tds on the endpoint ring.
814  */
815 struct cdnsp_ep {
816         struct usb_ep endpoint;
817         struct list_head pending_list;
818         struct cdnsp_device *pdev;
819         u8 number;
820         u8 idx;
821         u32 interval;
822         char name[20];
823         u8 direction;
824         u8 buffering;
825         u8 buffering_period;
826         struct cdnsp_ep_ctx *in_ctx;
827         struct cdnsp_ep_ctx *out_ctx;
828         struct cdnsp_ring *ring;
829         struct cdnsp_stream_info stream_info;
830         unsigned int ep_state;
831 #define EP_ENABLED              BIT(0)
832 #define EP_DIS_IN_RROGRESS      BIT(1)
833 #define EP_HALTED               BIT(2)
834 #define EP_STOPPED              BIT(3)
835 #define EP_WEDGE                BIT(4)
836 #define EP0_HALTED_STATUS       BIT(5)
837 #define EP_HAS_STREAMS          BIT(6)
838 #define EP_UNCONFIGURED         BIT(7)
839
840         bool skip;
841 };
842
843 /**
844  * struct cdnsp_device_context_array
845  * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts.
846  * @dma: DMA address for device contexts structure.
847  */
848 struct cdnsp_device_context_array {
849         __le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1];
850         dma_addr_t dma;
851 };
852
853 /**
854  * struct cdnsp_transfer_event.
855  * @buffer: 64-bit buffer address, or immediate data.
856  * @transfer_len: Data length transferred.
857  * @flags: Field is interpreted differently based on the type of TRB.
858  */
859 struct cdnsp_transfer_event {
860         __le64 buffer;
861         __le32 transfer_len;
862         __le32 flags;
863 };
864
865 /* Invalidate event after disabling endpoint. */
866 #define TRB_EVENT_INVALIDATE 8
867
868 /* Transfer event TRB length bit mask. */
869 /* bits 0:23 */
870 #define EVENT_TRB_LEN(p)                        ((p) & GENMASK(23, 0))
871 /* Completion Code - only applicable for some types of TRBs */
872 #define COMP_CODE_MASK                          (0xff << 24)
873 #define GET_COMP_CODE(p)                        (((p) & COMP_CODE_MASK) >> 24)
874 #define COMP_INVALID                            0
875 #define COMP_SUCCESS                            1
876 #define COMP_DATA_BUFFER_ERROR                  2
877 #define COMP_BABBLE_DETECTED_ERROR              3
878 #define COMP_TRB_ERROR                          5
879 #define COMP_RESOURCE_ERROR                     7
880 #define COMP_NO_SLOTS_AVAILABLE_ERROR           9
881 #define COMP_INVALID_STREAM_TYPE_ERROR          10
882 #define COMP_SLOT_NOT_ENABLED_ERROR             11
883 #define COMP_ENDPOINT_NOT_ENABLED_ERROR         12
884 #define COMP_SHORT_PACKET                       13
885 #define COMP_RING_UNDERRUN                      14
886 #define COMP_RING_OVERRUN                       15
887 #define COMP_VF_EVENT_RING_FULL_ERROR           16
888 #define COMP_PARAMETER_ERROR                    17
889 #define COMP_CONTEXT_STATE_ERROR                19
890 #define COMP_EVENT_RING_FULL_ERROR              21
891 #define COMP_INCOMPATIBLE_DEVICE_ERROR          22
892 #define COMP_MISSED_SERVICE_ERROR               23
893 #define COMP_COMMAND_RING_STOPPED               24
894 #define COMP_COMMAND_ABORTED                    25
895 #define COMP_STOPPED                            26
896 #define COMP_STOPPED_LENGTH_INVALID             27
897 #define COMP_STOPPED_SHORT_PACKET               28
898 #define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR   29
899 #define COMP_ISOCH_BUFFER_OVERRUN               31
900 #define COMP_EVENT_LOST_ERROR                   32
901 #define COMP_UNDEFINED_ERROR                    33
902 #define COMP_INVALID_STREAM_ID_ERROR            34
903
904 /*Transfer Event NRDY bit fields */
905 #define TRB_TO_DEV_STREAM(p)                    ((p) & GENMASK(16, 0))
906 #define TRB_TO_HOST_STREAM(p)                   ((p) & GENMASK(16, 0))
907 #define STREAM_PRIME_ACK                        0xFFFE
908 #define STREAM_REJECTED                         0xFFFF
909
910 /** Transfer Event bit fields **/
911 #define TRB_TO_EP_ID(p)                         (((p) & GENMASK(20, 16)) >> 16)
912
913 /**
914  * struct cdnsp_link_trb
915  * @segment_ptr: 64-bit segment pointer.
916  * @intr_target: Interrupter target.
917  * @control: Flags.
918  */
919 struct cdnsp_link_trb {
920         __le64 segment_ptr;
921         __le32 intr_target;
922         __le32 control;
923 };
924
925 /* control bitfields */
926 #define LINK_TOGGLE     BIT(1)
927
928 /**
929  * struct cdnsp_event_cmd - Command completion event TRB.
930  * cmd_trb: Pointer to command TRB, or the value passed by the event data trb
931  * status: Command completion parameters and error code.
932  * flags: Flags.
933  */
934 struct cdnsp_event_cmd {
935         __le64 cmd_trb;
936         __le32 status;
937         __le32 flags;
938 };
939
940 /* flags bitmasks */
941
942 /* Address device - disable SetAddress. */
943 #define TRB_BSR         BIT(9)
944
945 /* Configure Endpoint - Deconfigure. */
946 #define TRB_DC          BIT(9)
947
948 /* Force Header */
949 #define TRB_FH_TO_PACKET_TYPE(p)        ((p) & GENMASK(4, 0))
950 #define TRB_FH_TR_PACKET                0x4
951 #define TRB_FH_TO_DEVICE_ADDRESS(p)     (((p) << 25) & GENMASK(31, 25))
952 #define TRB_FH_TR_PACKET_DEV_NOT        0x6
953 #define TRB_FH_TO_NOT_TYPE(p)           (((p) << 4) & GENMASK(7, 4))
954 #define TRB_FH_TR_PACKET_FUNCTION_WAKE  0x1
955 #define TRB_FH_TO_INTERFACE(p)          (((p) << 8) & GENMASK(15, 8))
956
957 enum cdnsp_setup_dev {
958         SETUP_CONTEXT_ONLY,
959         SETUP_CONTEXT_ADDRESS,
960 };
961
962 /* bits 24:31 are the slot ID. */
963 #define TRB_TO_SLOT_ID(p)               (((p) & GENMASK(31, 24)) >> 24)
964 #define SLOT_ID_FOR_TRB(p)              (((p) << 24) & GENMASK(31, 24))
965
966 /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */
967 #define TRB_TO_EP_INDEX(p)              (((p) >> 16) & 0x1f)
968
969 #define EP_ID_FOR_TRB(p)                ((((p) + 1) << 16) & GENMASK(20, 16))
970
971 #define SUSPEND_PORT_FOR_TRB(p)         (((p) & 1) << 23)
972 #define TRB_TO_SUSPEND_PORT(p)          (((p) >> 23) & 0x1)
973 #define LAST_EP_INDEX                   30
974
975 /* Set TR Dequeue Pointer command TRB fields. */
976 #define TRB_TO_STREAM_ID(p)             ((((p) & GENMASK(31, 16)) >> 16))
977 #define STREAM_ID_FOR_TRB(p)            ((((p)) << 16) & GENMASK(31, 16))
978 #define SCT_FOR_TRB(p)                  (((p) << 1) & 0x7)
979
980 /* Link TRB specific fields. */
981 #define TRB_TC                          BIT(1)
982
983 /* Port Status Change Event TRB fields. */
984 /* Port ID - bits 31:24. */
985 #define GET_PORT_ID(p)                  (((p) & GENMASK(31, 24)) >> 24)
986 #define SET_PORT_ID(p)                  (((p) << 24) & GENMASK(31, 24))
987 #define EVENT_DATA                      BIT(2)
988
989 /* Normal TRB fields. */
990 /* transfer_len bitmasks - bits 0:16. */
991 #define TRB_LEN(p)                      ((p) & GENMASK(16, 0))
992 /* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */
993 #define TRB_TD_SIZE(p)                  (min((p), (u32)31) << 17)
994 #define GET_TD_SIZE(p)                  (((p) & GENMASK(21, 17)) >> 17)
995 /*
996  * Controller uses the TD_SIZE field for TBC if Extended TBC
997  * is enabled (ETE).
998  */
999 #define TRB_TD_SIZE_TBC(p)              (min((p), (u32)31) << 17)
1000 /* Interrupter Target - which MSI-X vector to target the completion event at. */
1001 #define TRB_INTR_TARGET(p)              (((p) << 22) & GENMASK(31, 22))
1002 #define GET_INTR_TARGET(p)              (((p) & GENMASK(31, 22)) >> 22)
1003 /*
1004  * Total burst count field, Rsvdz on controller with Extended TBC
1005  * enabled (ETE).
1006  */
1007 #define TRB_TBC(p)                      (((p) & 0x3) << 7)
1008 #define TRB_TLBPC(p)                    (((p) & 0xf) << 16)
1009
1010 /* Cycle bit - indicates TRB ownership by driver or driver.*/
1011 #define TRB_CYCLE                       BIT(0)
1012 /*
1013  * Force next event data TRB to be evaluated before task switch.
1014  * Used to pass OS data back after a TD completes.
1015  */
1016 #define TRB_ENT                         BIT(1)
1017 /* Interrupt on short packet. */
1018 #define TRB_ISP                         BIT(2)
1019 /* Set PCIe no snoop attribute. */
1020 #define TRB_NO_SNOOP                    BIT(3)
1021 /* Chain multiple TRBs into a TD. */
1022 #define TRB_CHAIN                       BIT(4)
1023 /* Interrupt on completion. */
1024 #define TRB_IOC                         BIT(5)
1025 /* The buffer pointer contains immediate data. */
1026 #define TRB_IDT                         BIT(6)
1027 /* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */
1028 #define TRB_STAT                        BIT(7)
1029 /* Block Event Interrupt. */
1030 #define TRB_BEI                         BIT(9)
1031
1032 /* Control transfer TRB specific fields. */
1033 #define TRB_DIR_IN                      BIT(16)
1034
1035 /* TRB bit mask in Data Stage TRB */
1036 #define TRB_SETUPID_BITMASK             GENMASK(9, 8)
1037 #define TRB_SETUPID(p)                  ((p) << 8)
1038 #define TRB_SETUPID_TO_TYPE(p)          (((p) & TRB_SETUPID_BITMASK) >> 8)
1039
1040 #define TRB_SETUP_SPEEDID_USB3          0x1
1041 #define TRB_SETUP_SPEEDID_USB2          0x0
1042 #define TRB_SETUP_SPEEDID(p)            ((p) & (1 << 7))
1043
1044 #define TRB_SETUPSTAT_ACK               0x1
1045 #define TRB_SETUPSTAT_STALL             0x0
1046 #define TRB_SETUPSTAT(p)                ((p) << 6)
1047
1048 /* Isochronous TRB specific fields */
1049 #define TRB_SIA                         BIT(31)
1050 #define TRB_FRAME_ID(p)                 (((p) << 20) & GENMASK(30, 20))
1051
1052 struct cdnsp_generic_trb {
1053         __le32 field[4];
1054 };
1055
1056 union cdnsp_trb {
1057         struct cdnsp_link_trb link;
1058         struct cdnsp_transfer_event trans_event;
1059         struct cdnsp_event_cmd event_cmd;
1060         struct cdnsp_generic_trb generic;
1061 };
1062
1063 /* TRB bit mask. */
1064 #define TRB_TYPE_BITMASK        GENMASK(15, 10)
1065 #define TRB_TYPE(p)             ((p) << 10)
1066 #define TRB_FIELD_TO_TYPE(p)    (((p) & TRB_TYPE_BITMASK) >> 10)
1067
1068 /* TRB type IDs. */
1069 /* bulk, interrupt, isoc scatter/gather, and control data stage. */
1070 #define TRB_NORMAL              1
1071 /* Setup Stage for control transfers. */
1072 #define TRB_SETUP               2
1073 /* Data Stage for control transfers. */
1074 #define TRB_DATA                3
1075 /* Status Stage for control transfers. */
1076 #define TRB_STATUS              4
1077 /* ISOC transfers. */
1078 #define TRB_ISOC                5
1079 /* TRB for linking ring segments. */
1080 #define TRB_LINK                6
1081 #define TRB_EVENT_DATA          7
1082 /* Transfer Ring No-op (not for the command ring). */
1083 #define TRB_TR_NOOP             8
1084
1085 /* Command TRBs */
1086 /* Enable Slot Command. */
1087 #define TRB_ENABLE_SLOT         9
1088 /* Disable Slot Command. */
1089 #define TRB_DISABLE_SLOT        10
1090 /* Address Device Command. */
1091 #define TRB_ADDR_DEV            11
1092 /* Configure Endpoint Command. */
1093 #define TRB_CONFIG_EP           12
1094 /* Evaluate Context Command. */
1095 #define TRB_EVAL_CONTEXT        13
1096 /* Reset Endpoint Command. */
1097 #define TRB_RESET_EP            14
1098 /* Stop Transfer Ring Command. */
1099 #define TRB_STOP_RING           15
1100 /* Set Transfer Ring Dequeue Pointer Command. */
1101 #define TRB_SET_DEQ             16
1102 /* Reset Device Command. */
1103 #define TRB_RESET_DEV           17
1104 /* Force Event Command (opt). */
1105 #define TRB_FORCE_EVENT         18
1106 /* Force Header Command - generate a transaction or link management packet. */
1107 #define TRB_FORCE_HEADER        22
1108 /* No-op Command - not for transfer rings. */
1109 #define TRB_CMD_NOOP            23
1110 /* TRB IDs 24-31 reserved. */
1111
1112 /* Event TRBS. */
1113 /* Transfer Event. */
1114 #define TRB_TRANSFER            32
1115 /* Command Completion Event. */
1116 #define TRB_COMPLETION          33
1117 /* Port Status Change Event. */
1118 #define TRB_PORT_STATUS         34
1119 /* Device Controller Event. */
1120 #define TRB_HC_EVENT            37
1121 /* MFINDEX Wrap Event - microframe counter wrapped. */
1122 #define TRB_MFINDEX_WRAP        39
1123 /* TRB IDs 40-47 reserved. */
1124 /* Endpoint Not Ready Event. */
1125 #define TRB_ENDPOINT_NRDY       48
1126 /* TRB IDs 49-53 reserved. */
1127 /* Halt Endpoint Command. */
1128 #define TRB_HALT_ENDPOINT       54
1129 /* Doorbell Overflow Event. */
1130 #define TRB_DRB_OVERFLOW        57
1131 /* Flush Endpoint Command. */
1132 #define TRB_FLUSH_ENDPOINT      58
1133
1134 #define TRB_TYPE_LINK(x)        (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1135 #define TRB_TYPE_LINK_LE32(x)   (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1136                                         cpu_to_le32(TRB_TYPE(TRB_LINK)))
1137 #define TRB_TYPE_NOOP_LE32(x)   (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1138                                         cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1139
1140 /*
1141  * TRBS_PER_SEGMENT must be a multiple of 4.
1142  * The command ring is 64-byte aligned, so it must also be greater than 16.
1143  */
1144 #define TRBS_PER_SEGMENT                256
1145 #define TRBS_PER_EVENT_SEGMENT          256
1146 #define TRBS_PER_EV_DEQ_UPDATE          100
1147 #define TRB_SEGMENT_SIZE                (TRBS_PER_SEGMENT * 16)
1148 #define TRB_SEGMENT_SHIFT               (ilog2(TRB_SEGMENT_SIZE))
1149 /* TRB buffer pointers can't cross 64KB boundaries. */
1150 #define TRB_MAX_BUFF_SHIFT              16
1151 #define TRB_MAX_BUFF_SIZE               BIT(TRB_MAX_BUFF_SHIFT)
1152 /* How much data is left before the 64KB boundary? */
1153 #define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
1154                                         ((addr) & (TRB_MAX_BUFF_SIZE - 1)))
1155
1156 /**
1157  * struct cdnsp_segment - segment related data.
1158  * @trbs: Array of Transfer Request Blocks.
1159  * @next: Pointer to the next segment.
1160  * @dma: DMA address of current segment.
1161  * @bounce_dma: Bounce  buffer DMA address .
1162  * @bounce_buf: Bounce buffer virtual address.
1163  * bounce_offs: Bounce buffer offset.
1164  * bounce_len: Bounce buffer length.
1165  */
1166 struct cdnsp_segment {
1167         union cdnsp_trb *trbs;
1168         struct cdnsp_segment *next;
1169         dma_addr_t dma;
1170         /* Max packet sized bounce buffer for td-fragmant alignment */
1171         dma_addr_t bounce_dma;
1172         void *bounce_buf;
1173         unsigned int bounce_offs;
1174         unsigned int bounce_len;
1175 };
1176
1177 /**
1178  * struct cdnsp_td - Transfer Descriptor object.
1179  * @td_list: Used for binding TD with ep_ring->td_list.
1180  * @preq: Request associated with this TD
1181  * @start_seg: Segment containing the first_trb in TD.
1182  * @first_trb: First TRB for this TD.
1183  * @last_trb: Last TRB related with TD.
1184  * @bounce_seg: Bounce segment for this TD.
1185  * @request_length_set: actual_length of the request has already been set.
1186  * @drbl - TD has been added to HW scheduler - only for stream capable
1187  *         endpoints.
1188  */
1189 struct cdnsp_td {
1190         struct list_head td_list;
1191         struct cdnsp_request *preq;
1192         struct cdnsp_segment *start_seg;
1193         union cdnsp_trb *first_trb;
1194         union cdnsp_trb *last_trb;
1195         struct cdnsp_segment *bounce_seg;
1196         bool request_length_set;
1197         bool drbl;
1198 };
1199
1200 /**
1201  * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring.
1202  * @new_deq_seg: New dequeue segment.
1203  * @new_deq_ptr: New dequeue pointer.
1204  * @new_cycle_state: New cycle state.
1205  * @stream_id: stream id for which new dequeue pointer has been selected.
1206  */
1207 struct cdnsp_dequeue_state {
1208         struct cdnsp_segment *new_deq_seg;
1209         union cdnsp_trb *new_deq_ptr;
1210         int new_cycle_state;
1211         unsigned int stream_id;
1212 };
1213
1214 enum cdnsp_ring_type {
1215         TYPE_CTRL = 0,
1216         TYPE_ISOC,
1217         TYPE_BULK,
1218         TYPE_INTR,
1219         TYPE_STREAM,
1220         TYPE_COMMAND,
1221         TYPE_EVENT,
1222 };
1223
1224 /**
1225  * struct cdnsp_ring - information describing transfer, command or event ring.
1226  * @first_seg: First segment on transfer ring.
1227  * @last_seg: Last segment on transfer ring.
1228  * @enqueue: SW enqueue pointer address.
1229  * @enq_seg: SW enqueue segment address.
1230  * @dequeue: SW dequeue pointer address.
1231  * @deq_seg: SW dequeue segment address.
1232  * @td_list: transfer descriptor list associated with this ring.
1233  * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle
1234  *               field to give ownership of the TRB to the device controller
1235  *               (if we are the producer) or to check if we own the TRB
1236  *               (if we are the consumer).
1237  * @stream_id: Stream id
1238  * @stream_active: Stream is active - PRIME packet has been detected.
1239  * @stream_rejected: This ring has been rejected by host.
1240  * @num_tds: Number of TDs associated with ring.
1241  * @num_segs: Number of segments.
1242  * @num_trbs_free: Number of free TRBs on the ring.
1243  * @bounce_buf_len: Length of bounce buffer.
1244  * @type: Ring type - event, transfer, or command ring.
1245  * @last_td_was_short - TD is short TD.
1246  * @trb_address_map: For mapping physical TRB addresses to segments in
1247  *                   stream rings.
1248  */
1249 struct cdnsp_ring {
1250         struct cdnsp_segment *first_seg;
1251         struct cdnsp_segment *last_seg;
1252         union cdnsp_trb  *enqueue;
1253         struct cdnsp_segment *enq_seg;
1254         union cdnsp_trb  *dequeue;
1255         struct cdnsp_segment *deq_seg;
1256         struct list_head td_list;
1257         u32 cycle_state;
1258         unsigned int stream_id;
1259         unsigned int stream_active;
1260         unsigned int stream_rejected;
1261         int num_tds;
1262         unsigned int num_segs;
1263         unsigned int num_trbs_free;
1264         unsigned int bounce_buf_len;
1265         enum cdnsp_ring_type type;
1266         bool last_td_was_short;
1267         struct radix_tree_root *trb_address_map;
1268 };
1269
1270 /**
1271  * struct cdnsp_erst_entry - even ring segment table entry object.
1272  * @seg_addr: 64-bit event ring segment address.
1273  * seg_size: Number of TRBs in segment.;
1274  */
1275 struct cdnsp_erst_entry {
1276         __le64 seg_addr;
1277         __le32 seg_size;
1278         /* Set to zero */
1279         __le32 rsvd;
1280 };
1281
1282 /**
1283  * struct cdnsp_erst - even ring segment table for event ring.
1284  * @entries: Array of event ring segments
1285  * @num_entries: Number of segments in entries array.
1286  * @erst_dma_addr: DMA address for entries array.
1287  */
1288 struct cdnsp_erst {
1289         struct cdnsp_erst_entry *entries;
1290         unsigned int num_entries;
1291         dma_addr_t erst_dma_addr;
1292 };
1293
1294 /**
1295  * struct cdnsp_request - extended device side representation of usb_request
1296  *                        object .
1297  * @td: Transfer descriptor associated with this request.
1298  * @request: Generic usb_request object describing single I/O request.
1299  * @list: Used to adding request to endpoint pending_list.
1300  * @pep: Extended representation of usb_ep object
1301  * @epnum: Endpoint number associated with usb request.
1302  * @direction: Endpoint direction for usb request.
1303  */
1304 struct cdnsp_request {
1305         struct  cdnsp_td td;
1306         struct usb_request request;
1307         struct list_head list;
1308         struct cdnsp_ep  *pep;
1309         u8 epnum;
1310         unsigned direction:1;
1311 };
1312
1313 #define ERST_NUM_SEGS   1
1314
1315 /* Stages used during enumeration process.*/
1316 enum cdnsp_ep0_stage {
1317         CDNSP_SETUP_STAGE,
1318         CDNSP_DATA_STAGE,
1319         CDNSP_STATUS_STAGE,
1320 };
1321
1322 /**
1323  * struct cdnsp_port - holds information about detected ports.
1324  * @port_num: Port number.
1325  * @exist: Indicate if port exist.
1326  * maj_rev: Major revision.
1327  * min_rev: Minor revision.
1328  */
1329 struct cdnsp_port {
1330         struct cdnsp_port_regs __iomem *regs;
1331         u8 port_num;
1332         u8 exist;
1333         u8 maj_rev;
1334         u8 min_rev;
1335 };
1336
1337 #define CDNSP_EXT_PORT_MAJOR(x)         (((x) >> 24) & 0xff)
1338 #define CDNSP_EXT_PORT_MINOR(x)         (((x) >> 16) & 0xff)
1339 #define CDNSP_EXT_PORT_OFF(x)           ((x) & 0xff)
1340 #define CDNSP_EXT_PORT_COUNT(x)         (((x) >> 8) & 0xff)
1341
1342 /**
1343  * struct cdnsp_device - represent USB device.
1344  * @dev: Pointer to device structure associated whit this controller.
1345  * @gadget: Device side representation of the peripheral controller.
1346  * @gadget_driver: Pointer to the gadget driver.
1347  * @irq: IRQ line number used by device side.
1348  * @regs:IO device memory.
1349  * @cap_regs: Capability registers.
1350  * @op_regs: Operational registers.
1351  * @run_regs: Runtime registers.
1352  * @dba: Device base address register.
1353  * @ir_set: Current interrupter register set.
1354  * @port20_regs: Port 2.0 Peripheral Configuration Registers.
1355  * @port3x_regs: USB3.x Port Peripheral Configuration Registers.
1356  * @rev_cap: Controller Capabilities Registers.
1357  * @hcs_params1: Cached register copies of read-only HCSPARAMS1
1358  * @hcc_params: Cached register copies of read-only HCCPARAMS1
1359  * @setup: Temporary buffer for setup packet.
1360  * @ep0_preq: Internal allocated request used during enumeration.
1361  * @ep0_stage: ep0 stage during enumeration process.
1362  * @three_stage_setup: Three state or two state setup.
1363  * @ep0_expect_in: Data IN expected for control transfer.
1364  * @setup_id: Setup identifier.
1365  * @setup_speed - Speed detected for current SETUP packet.
1366  * @setup_buf: Buffer for SETUP packet.
1367  * @device_address: Current device address.
1368  * @may_wakeup: remote wakeup enabled/disabled.
1369  * @lock: Lock used in interrupt thread context.
1370  * @hci_version: device controller version.
1371  * @dcbaa: Device context base address array.
1372  * @cmd_ring: Command ring.
1373  * @cmd: Represent all what is needed to issue command on Command Ring.
1374  * @event_ring: Event ring.
1375  * @erst: Event Ring Segment table
1376  * @slot_id: Current Slot ID. Should be 0 or 1.
1377  * @out_ctx: Output context.
1378  * @in_ctx: Input context.
1379  * @eps: array of endpoints object associated with device.
1380  * @usb2_hw_lpm_capable: hardware lpm is enabled;
1381  * @u1_allowed: Allow device transition to U1 state.
1382  * @u2_allowed: Allow device transition to U2 state
1383  * @device_pool: DMA pool for allocating input and output context.
1384  * @segment_pool: DMA pool for allocating new segments.
1385  * @cdnsp_state: Current state of controller.
1386  * @link_state: Current link state.
1387  * @usb2_port - Port USB 2.0.
1388  * @usb3_port - Port USB 3.0.
1389  * @active_port - Current selected Port.
1390  * @test_mode: selected Test Mode.
1391  */
1392 struct cdnsp_device {
1393         struct device *dev;
1394         struct usb_gadget gadget;
1395         struct usb_gadget_driver *gadget_driver;
1396         unsigned int irq;
1397         void __iomem *regs;
1398
1399         /* Registers map */
1400         struct cdnsp_cap_regs __iomem *cap_regs;
1401         struct cdnsp_op_regs __iomem *op_regs;
1402         struct cdnsp_run_regs __iomem *run_regs;
1403         struct cdnsp_doorbell_array __iomem *dba;
1404         struct  cdnsp_intr_reg __iomem *ir_set;
1405         struct cdnsp_20port_cap __iomem *port20_regs;
1406         struct cdnsp_3xport_cap __iomem *port3x_regs;
1407         struct cdnsp_rev_cap __iomem *rev_cap;
1408
1409         /* Cached register copies of read-only CDNSP data */
1410         __u32 hcs_params1;
1411         __u32 hcs_params3;
1412         __u32 hcc_params;
1413         /* Lock used in interrupt thread context. */
1414         spinlock_t lock;
1415         struct usb_ctrlrequest setup;
1416         struct cdnsp_request ep0_preq;
1417         enum cdnsp_ep0_stage ep0_stage;
1418         u8 three_stage_setup;
1419         u8 ep0_expect_in;
1420         u8 setup_id;
1421         u8 setup_speed;
1422         void *setup_buf;
1423         u8 device_address;
1424         int may_wakeup;
1425         u16 hci_version;
1426
1427         /* data structures */
1428         struct cdnsp_device_context_array *dcbaa;
1429         struct cdnsp_ring *cmd_ring;
1430         struct cdnsp_command cmd;
1431         struct cdnsp_ring *event_ring;
1432         struct cdnsp_erst erst;
1433         int slot_id;
1434
1435         /*
1436          * Commands to the hardware are passed an "input context" that
1437          * tells the hardware what to change in its data structures.
1438          * The hardware will return changes in an "output context" that
1439          * software must allocate for the hardware. .
1440          */
1441         struct cdnsp_container_ctx out_ctx;
1442         struct cdnsp_container_ctx in_ctx;
1443         struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM];
1444         u8 usb2_hw_lpm_capable:1;
1445         u8 u1_allowed:1;
1446         u8 u2_allowed:1;
1447
1448         /* DMA pools */
1449         struct dma_pool *device_pool;
1450         struct dma_pool *segment_pool;
1451
1452 #define CDNSP_STATE_HALTED              BIT(1)
1453 #define CDNSP_STATE_DYING               BIT(2)
1454 #define CDNSP_STATE_DISCONNECT_PENDING  BIT(3)
1455 #define CDNSP_WAKEUP_PENDING            BIT(4)
1456         unsigned int cdnsp_state;
1457         unsigned int link_state;
1458
1459         struct cdnsp_port usb2_port;
1460         struct cdnsp_port usb3_port;
1461         struct cdnsp_port *active_port;
1462         u16 test_mode;
1463 };
1464
1465 /*
1466  * Registers should always be accessed with double word or quad word accesses.
1467  *
1468  * Registers with 64-bit address pointers should be written to with
1469  * dword accesses by writing the low dword first (ptr[0]), then the high dword
1470  * (ptr[1]) second. controller implementations that do not support 64-bit
1471  * address pointers will ignore the high dword, and write order is irrelevant.
1472  */
1473 static inline u64 cdnsp_read_64(__le64 __iomem *regs)
1474 {
1475         return lo_hi_readq(regs);
1476 }
1477
1478 static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs)
1479 {
1480         lo_hi_writeq(val, regs);
1481 }
1482
1483 /* CDNSP memory management functions. */
1484 void cdnsp_mem_cleanup(struct cdnsp_device *pdev);
1485 int cdnsp_mem_init(struct cdnsp_device *pdev);
1486 int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev);
1487 void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev);
1488 void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep);
1489 int cdnsp_endpoint_init(struct cdnsp_device *pdev,
1490                         struct cdnsp_ep *pep,
1491                         gfp_t mem_flags);
1492 int cdnsp_ring_expansion(struct cdnsp_device *pdev,
1493                          struct cdnsp_ring *ring,
1494                          unsigned int num_trbs, gfp_t flags);
1495 struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address);
1496 int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
1497                             struct cdnsp_ep *pep,
1498                             unsigned int num_stream_ctxs,
1499                             unsigned int num_streams);
1500 int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
1501 void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
1502
1503 /* Device controller glue. */
1504 int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id);
1505 int cdnsp_halt(struct cdnsp_device *pdev);
1506 void cdnsp_died(struct cdnsp_device *pdev);
1507 int cdnsp_reset(struct cdnsp_device *pdev);
1508 irqreturn_t cdnsp_irq_handler(int irq, void *priv);
1509 int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup);
1510 void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data,
1511                                  struct usb_request *req, int enable);
1512 irqreturn_t cdnsp_thread_irq_handler(int irq, void *data);
1513
1514 /* Ring, segment, TRB, and TD functions. */
1515 dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
1516                                  union cdnsp_trb *trb);
1517 bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb);
1518 bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
1519                             struct cdnsp_segment *seg,
1520                             union cdnsp_trb *trb);
1521 int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev);
1522 void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
1523                                union cdnsp_trb *event_ring_deq,
1524                                u8 clear_ehb);
1525 void cdnsp_initialize_ring_info(struct cdnsp_ring *ring);
1526 void cdnsp_ring_cmd_db(struct cdnsp_device *pdev);
1527 void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type);
1528 void cdnsp_queue_address_device(struct cdnsp_device *pdev,
1529                                 dma_addr_t in_ctx_ptr,
1530                                 enum cdnsp_setup_dev setup);
1531 void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev,
1532                                unsigned int ep_index);
1533 int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
1534 int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
1535 int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev,
1536                                 struct cdnsp_request *preq);
1537 void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
1538                                     dma_addr_t in_ctx_ptr);
1539 void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index);
1540 void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev,
1541                                unsigned int ep_index);
1542 void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev,
1543                                 unsigned int ep_index);
1544 void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num);
1545 void cdnsp_queue_reset_device(struct cdnsp_device *pdev);
1546 void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
1547                                    struct cdnsp_ep *pep,
1548                                    struct cdnsp_dequeue_state *deq_state);
1549 void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
1550                                           struct cdnsp_ep *pep);
1551 void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring);
1552 void cdnsp_set_link_state(struct cdnsp_device *pdev,
1553                           __le32 __iomem *port_regs, u32 link_state);
1554 u32 cdnsp_port_state_to_neutral(u32 state);
1555
1556 /* CDNSP device controller contexts. */
1557 int cdnsp_enable_slot(struct cdnsp_device *pdev);
1558 int cdnsp_disable_slot(struct cdnsp_device *pdev);
1559 struct cdnsp_input_control_ctx
1560         *cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx);
1561 struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx);
1562 struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
1563                                       unsigned int ep_index);
1564 /* CDNSP gadget interface. */
1565 void cdnsp_suspend_gadget(struct cdnsp_device *pdev);
1566 void cdnsp_resume_gadget(struct cdnsp_device *pdev);
1567 void cdnsp_disconnect_gadget(struct cdnsp_device *pdev);
1568 void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq,
1569                            int status);
1570 int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
1571 int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
1572 unsigned int cdnsp_port_speed(unsigned int port_status);
1573 void cdnsp_irq_reset(struct cdnsp_device *pdev);
1574 int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
1575                         struct cdnsp_ep *pep, int value);
1576 int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
1577 int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
1578 void cdnsp_setup_analyze(struct cdnsp_device *pdev);
1579 int cdnsp_status_stage(struct cdnsp_device *pdev);
1580 int cdnsp_reset_device(struct cdnsp_device *pdev);
1581
1582 /**
1583  * next_request - gets the next request on the given list
1584  * @list: the request list to operate on
1585  *
1586  * Caller should take care of locking. This function return NULL or the first
1587  * request available on list.
1588  */
1589 static inline struct cdnsp_request *next_request(struct list_head *list)
1590 {
1591         return list_first_entry_or_null(list, struct cdnsp_request, list);
1592 }
1593
1594 #define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint))
1595 #define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget))
1596 #define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \
1597                                      request))
1598 #define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request))
1599 int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq,
1600                          struct cdnsp_ep *pep);
1601
1602 #endif /* __LINUX_CDNSP_GADGET_H */