Merge tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
[linux-2.6-microblaze.git] / drivers / uio / uio_dmem_genirq.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/uio/uio_dmem_genirq.c
4  *
5  * Userspace I/O platform driver with generic IRQ handling code.
6  *
7  * Copyright (C) 2012 Damian Hobson-Garcia
8  *
9  * Based on uio_pdrv_genirq.c by Magnus Damm
10  */
11
12 #include <linux/platform_device.h>
13 #include <linux/uio_driver.h>
14 #include <linux/spinlock.h>
15 #include <linux/bitops.h>
16 #include <linux/module.h>
17 #include <linux/interrupt.h>
18 #include <linux/platform_data/uio_dmem_genirq.h>
19 #include <linux/stringify.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/slab.h>
23 #include <linux/irq.h>
24
25 #include <linux/of.h>
26 #include <linux/of_platform.h>
27 #include <linux/of_address.h>
28
29 #define DRIVER_NAME "uio_dmem_genirq"
30 #define DMEM_MAP_ERROR (~0)
31
32 struct uio_dmem_genirq_platdata {
33         struct uio_info *uioinfo;
34         spinlock_t lock;
35         unsigned long flags;
36         struct platform_device *pdev;
37         unsigned int dmem_region_start;
38         unsigned int num_dmem_regions;
39         void *dmem_region_vaddr[MAX_UIO_MAPS];
40         struct mutex alloc_lock;
41         unsigned int refcnt;
42 };
43
44 static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode)
45 {
46         struct uio_dmem_genirq_platdata *priv = info->priv;
47         struct uio_mem *uiomem;
48         int dmem_region = priv->dmem_region_start;
49
50         uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
51
52         mutex_lock(&priv->alloc_lock);
53         while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
54                 void *addr;
55                 if (!uiomem->size)
56                         break;
57
58                 addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size,
59                                 (dma_addr_t *)&uiomem->addr, GFP_KERNEL);
60                 if (!addr) {
61                         uiomem->addr = DMEM_MAP_ERROR;
62                 }
63                 priv->dmem_region_vaddr[dmem_region++] = addr;
64                 ++uiomem;
65         }
66         priv->refcnt++;
67
68         mutex_unlock(&priv->alloc_lock);
69         /* Wait until the Runtime PM code has woken up the device */
70         pm_runtime_get_sync(&priv->pdev->dev);
71         return 0;
72 }
73
74 static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode)
75 {
76         struct uio_dmem_genirq_platdata *priv = info->priv;
77         struct uio_mem *uiomem;
78         int dmem_region = priv->dmem_region_start;
79
80         /* Tell the Runtime PM code that the device has become idle */
81         pm_runtime_put_sync(&priv->pdev->dev);
82
83         uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
84
85         mutex_lock(&priv->alloc_lock);
86
87         priv->refcnt--;
88         while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
89                 if (!uiomem->size)
90                         break;
91                 if (priv->dmem_region_vaddr[dmem_region]) {
92                         dma_free_coherent(&priv->pdev->dev, uiomem->size,
93                                         priv->dmem_region_vaddr[dmem_region],
94                                         uiomem->addr);
95                 }
96                 uiomem->addr = DMEM_MAP_ERROR;
97                 ++dmem_region;
98                 ++uiomem;
99         }
100
101         mutex_unlock(&priv->alloc_lock);
102         return 0;
103 }
104
105 static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
106 {
107         struct uio_dmem_genirq_platdata *priv = dev_info->priv;
108
109         /* Just disable the interrupt in the interrupt controller, and
110          * remember the state so we can allow user space to enable it later.
111          */
112
113         if (!test_and_set_bit(0, &priv->flags))
114                 disable_irq_nosync(irq);
115
116         return IRQ_HANDLED;
117 }
118
119 static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
120 {
121         struct uio_dmem_genirq_platdata *priv = dev_info->priv;
122         unsigned long flags;
123
124         /* Allow user space to enable and disable the interrupt
125          * in the interrupt controller, but keep track of the
126          * state to prevent per-irq depth damage.
127          *
128          * Serialize this operation to support multiple tasks.
129          */
130
131         spin_lock_irqsave(&priv->lock, flags);
132         if (irq_on) {
133                 if (test_and_clear_bit(0, &priv->flags))
134                         enable_irq(dev_info->irq);
135                 spin_unlock_irqrestore(&priv->lock, flags);
136         } else {
137                 if (!test_and_set_bit(0, &priv->flags)) {
138                         spin_unlock_irqrestore(&priv->lock, flags);
139                         disable_irq(dev_info->irq);
140                 }
141         }
142
143         return 0;
144 }
145
146 static int uio_dmem_genirq_probe(struct platform_device *pdev)
147 {
148         struct uio_dmem_genirq_pdata *pdata = dev_get_platdata(&pdev->dev);
149         struct uio_info *uioinfo = &pdata->uioinfo;
150         struct uio_dmem_genirq_platdata *priv;
151         struct uio_mem *uiomem;
152         int ret = -EINVAL;
153         int i;
154
155         if (pdev->dev.of_node) {
156                 /* alloc uioinfo for one device */
157                 uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
158                 if (!uioinfo) {
159                         ret = -ENOMEM;
160                         dev_err(&pdev->dev, "unable to kmalloc\n");
161                         goto bad2;
162                 }
163                 uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
164                                                pdev->dev.of_node);
165                 uioinfo->version = "devicetree";
166         }
167
168         if (!uioinfo || !uioinfo->name || !uioinfo->version) {
169                 dev_err(&pdev->dev, "missing platform_data\n");
170                 goto bad0;
171         }
172
173         if (uioinfo->handler || uioinfo->irqcontrol ||
174             uioinfo->irq_flags & IRQF_SHARED) {
175                 dev_err(&pdev->dev, "interrupt configuration error\n");
176                 goto bad0;
177         }
178
179         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
180         if (!priv) {
181                 ret = -ENOMEM;
182                 dev_err(&pdev->dev, "unable to kmalloc\n");
183                 goto bad0;
184         }
185
186         dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
187
188         priv->uioinfo = uioinfo;
189         spin_lock_init(&priv->lock);
190         priv->flags = 0; /* interrupt is enabled to begin with */
191         priv->pdev = pdev;
192         mutex_init(&priv->alloc_lock);
193
194         if (!uioinfo->irq) {
195                 /* Multiple IRQs are not supported */
196                 ret = platform_get_irq(pdev, 0);
197                 if (ret == -ENXIO && pdev->dev.of_node)
198                         ret = UIO_IRQ_NONE;
199                 else if (ret < 0)
200                         goto bad1;
201                 uioinfo->irq = ret;
202         }
203
204         if (uioinfo->irq) {
205                 struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
206
207                 /*
208                  * If a level interrupt, dont do lazy disable. Otherwise the
209                  * irq will fire again since clearing of the actual cause, on
210                  * device level, is done in userspace
211                  * irqd_is_level_type() isn't used since isn't valid until
212                  * irq is configured.
213                  */
214                 if (irq_data &&
215                     irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
216                         dev_dbg(&pdev->dev, "disable lazy unmask\n");
217                         irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
218                 }
219         }
220
221         uiomem = &uioinfo->mem[0];
222
223         for (i = 0; i < pdev->num_resources; ++i) {
224                 struct resource *r = &pdev->resource[i];
225
226                 if (r->flags != IORESOURCE_MEM)
227                         continue;
228
229                 if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
230                         dev_warn(&pdev->dev, "device has more than "
231                                         __stringify(MAX_UIO_MAPS)
232                                         " I/O memory resources.\n");
233                         break;
234                 }
235
236                 uiomem->memtype = UIO_MEM_PHYS;
237                 uiomem->addr = r->start;
238                 uiomem->size = resource_size(r);
239                 ++uiomem;
240         }
241
242         priv->dmem_region_start = uiomem - &uioinfo->mem[0];
243         priv->num_dmem_regions = pdata->num_dynamic_regions;
244
245         for (i = 0; i < pdata->num_dynamic_regions; ++i) {
246                 if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
247                         dev_warn(&pdev->dev, "device has more than "
248                                         __stringify(MAX_UIO_MAPS)
249                                         " dynamic and fixed memory regions.\n");
250                         break;
251                 }
252                 uiomem->memtype = UIO_MEM_PHYS;
253                 uiomem->addr = DMEM_MAP_ERROR;
254                 uiomem->size = pdata->dynamic_region_sizes[i];
255                 ++uiomem;
256         }
257
258         while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
259                 uiomem->size = 0;
260                 ++uiomem;
261         }
262
263         /* This driver requires no hardware specific kernel code to handle
264          * interrupts. Instead, the interrupt handler simply disables the
265          * interrupt in the interrupt controller. User space is responsible
266          * for performing hardware specific acknowledge and re-enabling of
267          * the interrupt in the interrupt controller.
268          *
269          * Interrupt sharing is not supported.
270          */
271
272         uioinfo->handler = uio_dmem_genirq_handler;
273         uioinfo->irqcontrol = uio_dmem_genirq_irqcontrol;
274         uioinfo->open = uio_dmem_genirq_open;
275         uioinfo->release = uio_dmem_genirq_release;
276         uioinfo->priv = priv;
277
278         /* Enable Runtime PM for this device:
279          * The device starts in suspended state to allow the hardware to be
280          * turned off by default. The Runtime PM bus code should power on the
281          * hardware and enable clocks at open().
282          */
283         pm_runtime_enable(&pdev->dev);
284
285         ret = uio_register_device(&pdev->dev, priv->uioinfo);
286         if (ret) {
287                 dev_err(&pdev->dev, "unable to register uio device\n");
288                 pm_runtime_disable(&pdev->dev);
289                 goto bad1;
290         }
291
292         platform_set_drvdata(pdev, priv);
293         return 0;
294  bad1:
295         kfree(priv);
296  bad0:
297         /* kfree uioinfo for OF */
298         if (pdev->dev.of_node)
299                 kfree(uioinfo);
300  bad2:
301         return ret;
302 }
303
304 static int uio_dmem_genirq_remove(struct platform_device *pdev)
305 {
306         struct uio_dmem_genirq_platdata *priv = platform_get_drvdata(pdev);
307
308         uio_unregister_device(priv->uioinfo);
309         pm_runtime_disable(&pdev->dev);
310
311         priv->uioinfo->handler = NULL;
312         priv->uioinfo->irqcontrol = NULL;
313
314         /* kfree uioinfo for OF */
315         if (pdev->dev.of_node)
316                 kfree(priv->uioinfo);
317
318         kfree(priv);
319         return 0;
320 }
321
322 static int uio_dmem_genirq_runtime_nop(struct device *dev)
323 {
324         /* Runtime PM callback shared between ->runtime_suspend()
325          * and ->runtime_resume(). Simply returns success.
326          *
327          * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
328          * are used at open() and release() time. This allows the
329          * Runtime PM code to turn off power to the device while the
330          * device is unused, ie before open() and after release().
331          *
332          * This Runtime PM callback does not need to save or restore
333          * any registers since user space is responsbile for hardware
334          * register reinitialization after open().
335          */
336         return 0;
337 }
338
339 static const struct dev_pm_ops uio_dmem_genirq_dev_pm_ops = {
340         .runtime_suspend = uio_dmem_genirq_runtime_nop,
341         .runtime_resume = uio_dmem_genirq_runtime_nop,
342 };
343
344 #ifdef CONFIG_OF
345 static const struct of_device_id uio_of_genirq_match[] = {
346         { /* empty for now */ },
347 };
348 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
349 #endif
350
351 static struct platform_driver uio_dmem_genirq = {
352         .probe = uio_dmem_genirq_probe,
353         .remove = uio_dmem_genirq_remove,
354         .driver = {
355                 .name = DRIVER_NAME,
356                 .pm = &uio_dmem_genirq_dev_pm_ops,
357                 .of_match_table = of_match_ptr(uio_of_genirq_match),
358         },
359 };
360
361 module_platform_driver(uio_dmem_genirq);
362
363 MODULE_AUTHOR("Damian Hobson-Garcia");
364 MODULE_DESCRIPTION("Userspace I/O platform driver with dynamic memory.");
365 MODULE_LICENSE("GPL v2");
366 MODULE_ALIAS("platform:" DRIVER_NAME);