1 // SPDX-License-Identifier: GPL-1.0+
3 * Device driver for Microgate SyncLink GT serial adapters.
5 * written by Paul Fulghum for Microgate Corporation
8 * Microgate and SyncLink are trademarks of Microgate Corporation
10 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
11 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
12 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
13 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
14 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
15 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
16 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
18 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
19 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
20 * OF THE POSSIBILITY OF SUCH DAMAGE.
24 * DEBUG OUTPUT DEFINITIONS
26 * uncomment lines below to enable specific types of debug output
28 * DBGINFO information - most verbose output
29 * DBGERR serious errors
30 * DBGBH bottom half service routine debugging
31 * DBGISR interrupt service routine debugging
32 * DBGDATA output receive and transmit data
33 * DBGTBUF output transmit DMA buffers and registers
34 * DBGRBUF output receive DMA buffers and registers
37 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
38 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
39 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
40 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
41 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
42 /*#define DBGTBUF(info) dump_tbufs(info)*/
43 /*#define DBGRBUF(info) dump_rbufs(info)*/
46 #include <linux/module.h>
47 #include <linux/errno.h>
48 #include <linux/signal.h>
49 #include <linux/sched.h>
50 #include <linux/timer.h>
51 #include <linux/interrupt.h>
52 #include <linux/pci.h>
53 #include <linux/tty.h>
54 #include <linux/tty_flip.h>
55 #include <linux/serial.h>
56 #include <linux/major.h>
57 #include <linux/string.h>
58 #include <linux/fcntl.h>
59 #include <linux/ptrace.h>
60 #include <linux/ioport.h>
62 #include <linux/seq_file.h>
63 #include <linux/slab.h>
64 #include <linux/netdevice.h>
65 #include <linux/vmalloc.h>
66 #include <linux/init.h>
67 #include <linux/delay.h>
68 #include <linux/ioctl.h>
69 #include <linux/termios.h>
70 #include <linux/bitops.h>
71 #include <linux/workqueue.h>
72 #include <linux/hdlc.h>
73 #include <linux/synclink.h>
78 #include <asm/types.h>
79 #include <linux/uaccess.h>
81 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
82 #define SYNCLINK_GENERIC_HDLC 1
84 #define SYNCLINK_GENERIC_HDLC 0
88 * module identification
90 static char *driver_name = "SyncLink GT";
91 static char *slgt_driver_name = "synclink_gt";
92 static char *tty_dev_prefix = "ttySLG";
93 MODULE_LICENSE("GPL");
94 #define MGSL_MAGIC 0x5401
95 #define MAX_DEVICES 32
97 static const struct pci_device_id pci_table[] = {
98 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
99 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
100 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
101 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
102 {0,}, /* terminate list */
104 MODULE_DEVICE_TABLE(pci, pci_table);
106 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
107 static void remove_one(struct pci_dev *dev);
108 static struct pci_driver pci_driver = {
109 .name = "synclink_gt",
110 .id_table = pci_table,
112 .remove = remove_one,
115 static bool pci_registered;
118 * module configuration and status
120 static struct slgt_info *slgt_device_list;
121 static int slgt_device_count;
124 static int debug_level;
125 static int maxframe[MAX_DEVICES];
127 module_param(ttymajor, int, 0);
128 module_param(debug_level, int, 0);
129 module_param_array(maxframe, int, NULL, 0);
131 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
132 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
133 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
136 * tty support and callbacks
138 static struct tty_driver *serial_driver;
140 static int open(struct tty_struct *tty, struct file * filp);
141 static void close(struct tty_struct *tty, struct file * filp);
142 static void hangup(struct tty_struct *tty);
143 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
145 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
146 static int put_char(struct tty_struct *tty, unsigned char ch);
147 static void send_xchar(struct tty_struct *tty, char ch);
148 static void wait_until_sent(struct tty_struct *tty, int timeout);
149 static int write_room(struct tty_struct *tty);
150 static void flush_chars(struct tty_struct *tty);
151 static void flush_buffer(struct tty_struct *tty);
152 static void tx_hold(struct tty_struct *tty);
153 static void tx_release(struct tty_struct *tty);
155 static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
156 static int chars_in_buffer(struct tty_struct *tty);
157 static void throttle(struct tty_struct * tty);
158 static void unthrottle(struct tty_struct * tty);
159 static int set_break(struct tty_struct *tty, int break_state);
162 * generic HDLC support and callbacks
164 #if SYNCLINK_GENERIC_HDLC
165 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
166 static void hdlcdev_tx_done(struct slgt_info *info);
167 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
168 static int hdlcdev_init(struct slgt_info *info);
169 static void hdlcdev_exit(struct slgt_info *info);
174 * device specific structures, macros and functions
177 #define SLGT_MAX_PORTS 4
178 #define SLGT_REG_SIZE 256
181 * conditional wait facility
184 struct cond_wait *next;
186 wait_queue_entry_t wait;
189 static void init_cond_wait(struct cond_wait *w, unsigned int data);
190 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
191 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
192 static void flush_cond_wait(struct cond_wait **head);
195 * DMA buffer descriptor and access macros
201 __le32 pbuf; /* physical address of data buffer */
202 __le32 next; /* physical address of next descriptor */
204 /* driver book keeping */
205 char *buf; /* virtual address of data buffer */
206 unsigned int pdesc; /* physical address of this descriptor */
207 dma_addr_t buf_dma_addr;
208 unsigned short buf_count;
211 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
212 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
213 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
214 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
215 #define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
216 #define desc_count(a) (le16_to_cpu((a).count))
217 #define desc_status(a) (le16_to_cpu((a).status))
218 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
219 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
220 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
221 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
222 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
224 struct _input_signal_events {
236 * device instance data structure
239 void *if_ptr; /* General purpose pointer (used by SPPP) */
240 struct tty_port port;
242 struct slgt_info *next_device; /* device list link */
246 char device_name[25];
247 struct pci_dev *pdev;
249 int port_count; /* count of ports on adapter */
250 int adapter_num; /* adapter instance number */
251 int port_num; /* port instance number */
253 /* array of pointers to port contexts on this adapter */
254 struct slgt_info *port_array[SLGT_MAX_PORTS];
256 int line; /* tty line instance number */
258 struct mgsl_icount icount;
261 int x_char; /* xon/xoff character */
262 unsigned int read_status_mask;
263 unsigned int ignore_status_mask;
265 wait_queue_head_t status_event_wait_q;
266 wait_queue_head_t event_wait_q;
267 struct timer_list tx_timer;
268 struct timer_list rx_timer;
270 unsigned int gpio_present;
271 struct cond_wait *gpio_wait_q;
273 spinlock_t lock; /* spinlock for synchronizing with ISR */
275 struct work_struct task;
281 bool irq_requested; /* true if IRQ requested */
282 bool irq_occurred; /* for diagnostics use */
284 /* device configuration */
286 unsigned int bus_type;
287 unsigned int irq_level;
288 unsigned long irq_flags;
290 unsigned char __iomem * reg_addr; /* memory mapped registers address */
292 bool reg_addr_requested;
294 MGSL_PARAMS params; /* communications parameters */
296 u32 max_frame_size; /* as set by device config */
298 unsigned int rbuf_fill_level;
300 unsigned int if_mode;
301 unsigned int base_clock;
313 unsigned char signals; /* serial signal states */
314 int init_error; /* initialization error */
316 unsigned char *tx_buf;
320 bool drop_rts_on_tx_done;
321 struct _input_signal_events input_signal_events;
323 int dcd_chkcount; /* check counts to prevent */
324 int cts_chkcount; /* too many IRQs if a signal */
325 int dsr_chkcount; /* is floating */
328 char *bufs; /* virtual address of DMA buffer lists */
329 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
331 unsigned int rbuf_count;
332 struct slgt_desc *rbufs;
333 unsigned int rbuf_current;
334 unsigned int rbuf_index;
335 unsigned int rbuf_fill_index;
336 unsigned short rbuf_fill_count;
338 unsigned int tbuf_count;
339 struct slgt_desc *tbufs;
340 unsigned int tbuf_current;
341 unsigned int tbuf_start;
343 unsigned char *tmp_rbuf;
344 unsigned int tmp_rbuf_count;
346 /* SPPP/Cisco HDLC device parts */
350 #if SYNCLINK_GENERIC_HDLC
351 struct net_device *netdev;
356 static MGSL_PARAMS default_params = {
357 .mode = MGSL_MODE_HDLC,
359 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
360 .encoding = HDLC_ENCODING_NRZI_SPACE,
363 .crc_type = HDLC_CRC_16_CCITT,
364 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
365 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
369 .parity = ASYNC_PARITY_NONE
374 #define BH_TRANSMIT 2
376 #define IO_PIN_SHUTDOWN_LIMIT 100
378 #define DMABUFSIZE 256
379 #define DESC_LIST_SIZE 4096
381 #define MASK_PARITY BIT1
382 #define MASK_FRAMING BIT0
383 #define MASK_BREAK BIT14
384 #define MASK_OVERRUN BIT4
386 #define GSR 0x00 /* global status */
387 #define JCR 0x04 /* JTAG control */
388 #define IODR 0x08 /* GPIO direction */
389 #define IOER 0x0c /* GPIO interrupt enable */
390 #define IOVR 0x10 /* GPIO value */
391 #define IOSR 0x14 /* GPIO interrupt status */
392 #define TDR 0x80 /* tx data */
393 #define RDR 0x80 /* rx data */
394 #define TCR 0x82 /* tx control */
395 #define TIR 0x84 /* tx idle */
396 #define TPR 0x85 /* tx preamble */
397 #define RCR 0x86 /* rx control */
398 #define VCR 0x88 /* V.24 control */
399 #define CCR 0x89 /* clock control */
400 #define BDR 0x8a /* baud divisor */
401 #define SCR 0x8c /* serial control */
402 #define SSR 0x8e /* serial status */
403 #define RDCSR 0x90 /* rx DMA control/status */
404 #define TDCSR 0x94 /* tx DMA control/status */
405 #define RDDAR 0x98 /* rx DMA descriptor address */
406 #define TDDAR 0x9c /* tx DMA descriptor address */
407 #define XSR 0x40 /* extended sync pattern */
408 #define XCR 0x44 /* extended control */
411 #define RXBREAK BIT14
412 #define IRQ_TXDATA BIT13
413 #define IRQ_TXIDLE BIT12
414 #define IRQ_TXUNDER BIT11 /* HDLC */
415 #define IRQ_RXDATA BIT10
416 #define IRQ_RXIDLE BIT9 /* HDLC */
417 #define IRQ_RXBREAK BIT9 /* async */
418 #define IRQ_RXOVER BIT8
423 #define IRQ_ALL 0x3ff0
424 #define IRQ_MASTER BIT0
426 #define slgt_irq_on(info, mask) \
427 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
428 #define slgt_irq_off(info, mask) \
429 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
431 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
432 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
433 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
434 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
435 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
436 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
438 static void msc_set_vcr(struct slgt_info *info);
440 static int startup(struct slgt_info *info);
441 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
442 static void shutdown(struct slgt_info *info);
443 static void program_hw(struct slgt_info *info);
444 static void change_params(struct slgt_info *info);
446 static int register_test(struct slgt_info *info);
447 static int irq_test(struct slgt_info *info);
448 static int loopback_test(struct slgt_info *info);
449 static int adapter_test(struct slgt_info *info);
451 static void reset_adapter(struct slgt_info *info);
452 static void reset_port(struct slgt_info *info);
453 static void async_mode(struct slgt_info *info);
454 static void sync_mode(struct slgt_info *info);
456 static void rx_stop(struct slgt_info *info);
457 static void rx_start(struct slgt_info *info);
458 static void reset_rbufs(struct slgt_info *info);
459 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
460 static void rdma_reset(struct slgt_info *info);
461 static bool rx_get_frame(struct slgt_info *info);
462 static bool rx_get_buf(struct slgt_info *info);
464 static void tx_start(struct slgt_info *info);
465 static void tx_stop(struct slgt_info *info);
466 static void tx_set_idle(struct slgt_info *info);
467 static unsigned int free_tbuf_count(struct slgt_info *info);
468 static unsigned int tbuf_bytes(struct slgt_info *info);
469 static void reset_tbufs(struct slgt_info *info);
470 static void tdma_reset(struct slgt_info *info);
471 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
473 static void get_signals(struct slgt_info *info);
474 static void set_signals(struct slgt_info *info);
475 static void enable_loopback(struct slgt_info *info);
476 static void set_rate(struct slgt_info *info, u32 data_rate);
478 static int bh_action(struct slgt_info *info);
479 static void bh_handler(struct work_struct *work);
480 static void bh_transmit(struct slgt_info *info);
481 static void isr_serial(struct slgt_info *info);
482 static void isr_rdma(struct slgt_info *info);
483 static void isr_txeom(struct slgt_info *info, unsigned short status);
484 static void isr_tdma(struct slgt_info *info);
486 static int alloc_dma_bufs(struct slgt_info *info);
487 static void free_dma_bufs(struct slgt_info *info);
488 static int alloc_desc(struct slgt_info *info);
489 static void free_desc(struct slgt_info *info);
490 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
491 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
493 static int alloc_tmp_rbuf(struct slgt_info *info);
494 static void free_tmp_rbuf(struct slgt_info *info);
496 static void tx_timeout(struct timer_list *t);
497 static void rx_timeout(struct timer_list *t);
502 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
503 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
504 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
505 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
506 static int set_txidle(struct slgt_info *info, int idle_mode);
507 static int tx_enable(struct slgt_info *info, int enable);
508 static int tx_abort(struct slgt_info *info);
509 static int rx_enable(struct slgt_info *info, int enable);
510 static int modem_input_wait(struct slgt_info *info,int arg);
511 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
512 static int tiocmget(struct tty_struct *tty);
513 static int tiocmset(struct tty_struct *tty,
514 unsigned int set, unsigned int clear);
515 static int set_break(struct tty_struct *tty, int break_state);
516 static int get_interface(struct slgt_info *info, int __user *if_mode);
517 static int set_interface(struct slgt_info *info, int if_mode);
518 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
519 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
520 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
521 static int get_xsync(struct slgt_info *info, int __user *if_mode);
522 static int set_xsync(struct slgt_info *info, int if_mode);
523 static int get_xctrl(struct slgt_info *info, int __user *if_mode);
524 static int set_xctrl(struct slgt_info *info, int if_mode);
529 static void add_device(struct slgt_info *info);
530 static void device_init(int adapter_num, struct pci_dev *pdev);
531 static int claim_resources(struct slgt_info *info);
532 static void release_resources(struct slgt_info *info);
551 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
555 printk("%s %s data:\n",info->device_name, label);
557 linecount = (count > 16) ? 16 : count;
558 for(i=0; i < linecount; i++)
559 printk("%02X ",(unsigned char)data[i]);
562 for(i=0;i<linecount;i++) {
563 if (data[i]>=040 && data[i]<=0176)
564 printk("%c",data[i]);
574 #define DBGDATA(info, buf, size, label)
578 static void dump_tbufs(struct slgt_info *info)
581 printk("tbuf_current=%d\n", info->tbuf_current);
582 for (i=0 ; i < info->tbuf_count ; i++) {
583 printk("%d: count=%04X status=%04X\n",
584 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
588 #define DBGTBUF(info)
592 static void dump_rbufs(struct slgt_info *info)
595 printk("rbuf_current=%d\n", info->rbuf_current);
596 for (i=0 ; i < info->rbuf_count ; i++) {
597 printk("%d: count=%04X status=%04X\n",
598 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
602 #define DBGRBUF(info)
605 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
609 printk("null struct slgt_info for (%s) in %s\n", devname, name);
612 if (info->magic != MGSL_MAGIC) {
613 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
624 * line discipline callback wrappers
626 * The wrappers maintain line discipline references
627 * while calling into the line discipline.
629 * ldisc_receive_buf - pass receive data to line discipline
631 static void ldisc_receive_buf(struct tty_struct *tty,
632 const __u8 *data, char *flags, int count)
634 struct tty_ldisc *ld;
637 ld = tty_ldisc_ref(tty);
639 if (ld->ops->receive_buf)
640 ld->ops->receive_buf(tty, data, flags, count);
647 static int open(struct tty_struct *tty, struct file *filp)
649 struct slgt_info *info;
654 if (line >= slgt_device_count) {
655 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
659 info = slgt_device_list;
660 while(info && info->line != line)
661 info = info->next_device;
662 if (sanity_check(info, tty->name, "open"))
664 if (info->init_error) {
665 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
669 tty->driver_data = info;
670 info->port.tty = tty;
672 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
674 mutex_lock(&info->port.mutex);
675 info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
677 spin_lock_irqsave(&info->netlock, flags);
678 if (info->netcount) {
680 spin_unlock_irqrestore(&info->netlock, flags);
681 mutex_unlock(&info->port.mutex);
685 spin_unlock_irqrestore(&info->netlock, flags);
687 if (info->port.count == 1) {
688 /* 1st open on this device, init hardware */
689 retval = startup(info);
691 mutex_unlock(&info->port.mutex);
695 mutex_unlock(&info->port.mutex);
696 retval = block_til_ready(tty, filp, info);
698 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
707 info->port.tty = NULL; /* tty layer will release tty struct */
712 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
716 static void close(struct tty_struct *tty, struct file *filp)
718 struct slgt_info *info = tty->driver_data;
720 if (sanity_check(info, tty->name, "close"))
722 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
724 if (tty_port_close_start(&info->port, tty, filp) == 0)
727 mutex_lock(&info->port.mutex);
728 if (tty_port_initialized(&info->port))
729 wait_until_sent(tty, info->timeout);
731 tty_ldisc_flush(tty);
734 mutex_unlock(&info->port.mutex);
736 tty_port_close_end(&info->port, tty);
737 info->port.tty = NULL;
739 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
742 static void hangup(struct tty_struct *tty)
744 struct slgt_info *info = tty->driver_data;
747 if (sanity_check(info, tty->name, "hangup"))
749 DBGINFO(("%s hangup\n", info->device_name));
753 mutex_lock(&info->port.mutex);
756 spin_lock_irqsave(&info->port.lock, flags);
757 info->port.count = 0;
758 info->port.tty = NULL;
759 spin_unlock_irqrestore(&info->port.lock, flags);
760 tty_port_set_active(&info->port, 0);
761 mutex_unlock(&info->port.mutex);
763 wake_up_interruptible(&info->port.open_wait);
766 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
768 struct slgt_info *info = tty->driver_data;
771 DBGINFO(("%s set_termios\n", tty->driver->name));
775 /* Handle transition to B0 status */
776 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
777 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
778 spin_lock_irqsave(&info->lock,flags);
780 spin_unlock_irqrestore(&info->lock,flags);
783 /* Handle transition away from B0 status */
784 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
785 info->signals |= SerialSignal_DTR;
786 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
787 info->signals |= SerialSignal_RTS;
788 spin_lock_irqsave(&info->lock,flags);
790 spin_unlock_irqrestore(&info->lock,flags);
793 /* Handle turning off CRTSCTS */
794 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
800 static void update_tx_timer(struct slgt_info *info)
803 * use worst case speed of 1200bps to calculate transmit timeout
804 * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
806 if (info->params.mode == MGSL_MODE_HDLC) {
807 int timeout = (tbuf_bytes(info) * 7) + 1000;
808 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
812 static int write(struct tty_struct *tty,
813 const unsigned char *buf, int count)
816 struct slgt_info *info = tty->driver_data;
819 if (sanity_check(info, tty->name, "write"))
822 DBGINFO(("%s write count=%d\n", info->device_name, count));
824 if (!info->tx_buf || (count > info->max_frame_size))
827 if (!count || tty->stopped || tty->hw_stopped)
830 spin_lock_irqsave(&info->lock, flags);
832 if (info->tx_count) {
833 /* send accumulated data from send_char() */
834 if (!tx_load(info, info->tx_buf, info->tx_count))
839 if (tx_load(info, buf, count))
843 spin_unlock_irqrestore(&info->lock, flags);
844 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
848 static int put_char(struct tty_struct *tty, unsigned char ch)
850 struct slgt_info *info = tty->driver_data;
854 if (sanity_check(info, tty->name, "put_char"))
856 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
859 spin_lock_irqsave(&info->lock,flags);
860 if (info->tx_count < info->max_frame_size) {
861 info->tx_buf[info->tx_count++] = ch;
864 spin_unlock_irqrestore(&info->lock,flags);
868 static void send_xchar(struct tty_struct *tty, char ch)
870 struct slgt_info *info = tty->driver_data;
873 if (sanity_check(info, tty->name, "send_xchar"))
875 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
878 spin_lock_irqsave(&info->lock,flags);
879 if (!info->tx_enabled)
881 spin_unlock_irqrestore(&info->lock,flags);
885 static void wait_until_sent(struct tty_struct *tty, int timeout)
887 struct slgt_info *info = tty->driver_data;
888 unsigned long orig_jiffies, char_time;
892 if (sanity_check(info, tty->name, "wait_until_sent"))
894 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
895 if (!tty_port_initialized(&info->port))
898 orig_jiffies = jiffies;
900 /* Set check interval to 1/5 of estimated time to
901 * send a character, and make it at least 1. The check
902 * interval should also be less than the timeout.
903 * Note: use tight timings here to satisfy the NIST-PCTS.
906 if (info->params.data_rate) {
907 char_time = info->timeout/(32 * 5);
914 char_time = min_t(unsigned long, char_time, timeout);
916 while (info->tx_active) {
917 msleep_interruptible(jiffies_to_msecs(char_time));
918 if (signal_pending(current))
920 if (timeout && time_after(jiffies, orig_jiffies + timeout))
924 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
927 static int write_room(struct tty_struct *tty)
929 struct slgt_info *info = tty->driver_data;
932 if (sanity_check(info, tty->name, "write_room"))
934 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
935 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
939 static void flush_chars(struct tty_struct *tty)
941 struct slgt_info *info = tty->driver_data;
944 if (sanity_check(info, tty->name, "flush_chars"))
946 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
948 if (info->tx_count <= 0 || tty->stopped ||
949 tty->hw_stopped || !info->tx_buf)
952 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
954 spin_lock_irqsave(&info->lock,flags);
955 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
957 spin_unlock_irqrestore(&info->lock,flags);
960 static void flush_buffer(struct tty_struct *tty)
962 struct slgt_info *info = tty->driver_data;
965 if (sanity_check(info, tty->name, "flush_buffer"))
967 DBGINFO(("%s flush_buffer\n", info->device_name));
969 spin_lock_irqsave(&info->lock, flags);
971 spin_unlock_irqrestore(&info->lock, flags);
977 * throttle (stop) transmitter
979 static void tx_hold(struct tty_struct *tty)
981 struct slgt_info *info = tty->driver_data;
984 if (sanity_check(info, tty->name, "tx_hold"))
986 DBGINFO(("%s tx_hold\n", info->device_name));
987 spin_lock_irqsave(&info->lock,flags);
988 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
990 spin_unlock_irqrestore(&info->lock,flags);
994 * release (start) transmitter
996 static void tx_release(struct tty_struct *tty)
998 struct slgt_info *info = tty->driver_data;
1001 if (sanity_check(info, tty->name, "tx_release"))
1003 DBGINFO(("%s tx_release\n", info->device_name));
1004 spin_lock_irqsave(&info->lock, flags);
1005 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
1007 spin_unlock_irqrestore(&info->lock, flags);
1011 * Service an IOCTL request
1015 * tty pointer to tty instance data
1016 * cmd IOCTL command code
1017 * arg command argument/context
1019 * Return 0 if success, otherwise error code
1021 static int ioctl(struct tty_struct *tty,
1022 unsigned int cmd, unsigned long arg)
1024 struct slgt_info *info = tty->driver_data;
1025 void __user *argp = (void __user *)arg;
1028 if (sanity_check(info, tty->name, "ioctl"))
1030 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1032 if (cmd != TIOCMIWAIT) {
1033 if (tty_io_error(tty))
1038 case MGSL_IOCWAITEVENT:
1039 return wait_mgsl_event(info, argp);
1041 return modem_input_wait(info,(int)arg);
1043 return set_gpio(info, argp);
1045 return get_gpio(info, argp);
1046 case MGSL_IOCWAITGPIO:
1047 return wait_gpio(info, argp);
1048 case MGSL_IOCGXSYNC:
1049 return get_xsync(info, argp);
1050 case MGSL_IOCSXSYNC:
1051 return set_xsync(info, (int)arg);
1052 case MGSL_IOCGXCTRL:
1053 return get_xctrl(info, argp);
1054 case MGSL_IOCSXCTRL:
1055 return set_xctrl(info, (int)arg);
1057 mutex_lock(&info->port.mutex);
1059 case MGSL_IOCGPARAMS:
1060 ret = get_params(info, argp);
1062 case MGSL_IOCSPARAMS:
1063 ret = set_params(info, argp);
1065 case MGSL_IOCGTXIDLE:
1066 ret = get_txidle(info, argp);
1068 case MGSL_IOCSTXIDLE:
1069 ret = set_txidle(info, (int)arg);
1071 case MGSL_IOCTXENABLE:
1072 ret = tx_enable(info, (int)arg);
1074 case MGSL_IOCRXENABLE:
1075 ret = rx_enable(info, (int)arg);
1077 case MGSL_IOCTXABORT:
1078 ret = tx_abort(info);
1080 case MGSL_IOCGSTATS:
1081 ret = get_stats(info, argp);
1084 ret = get_interface(info, argp);
1087 ret = set_interface(info,(int)arg);
1092 mutex_unlock(&info->port.mutex);
1096 static int get_icount(struct tty_struct *tty,
1097 struct serial_icounter_struct *icount)
1100 struct slgt_info *info = tty->driver_data;
1101 struct mgsl_icount cnow; /* kernel counter temps */
1102 unsigned long flags;
1104 spin_lock_irqsave(&info->lock,flags);
1105 cnow = info->icount;
1106 spin_unlock_irqrestore(&info->lock,flags);
1108 icount->cts = cnow.cts;
1109 icount->dsr = cnow.dsr;
1110 icount->rng = cnow.rng;
1111 icount->dcd = cnow.dcd;
1112 icount->rx = cnow.rx;
1113 icount->tx = cnow.tx;
1114 icount->frame = cnow.frame;
1115 icount->overrun = cnow.overrun;
1116 icount->parity = cnow.parity;
1117 icount->brk = cnow.brk;
1118 icount->buf_overrun = cnow.buf_overrun;
1124 * support for 32 bit ioctl calls on 64 bit systems
1126 #ifdef CONFIG_COMPAT
1127 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1129 struct MGSL_PARAMS32 tmp_params;
1131 DBGINFO(("%s get_params32\n", info->device_name));
1132 memset(&tmp_params, 0, sizeof(tmp_params));
1133 tmp_params.mode = (compat_ulong_t)info->params.mode;
1134 tmp_params.loopback = info->params.loopback;
1135 tmp_params.flags = info->params.flags;
1136 tmp_params.encoding = info->params.encoding;
1137 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1138 tmp_params.addr_filter = info->params.addr_filter;
1139 tmp_params.crc_type = info->params.crc_type;
1140 tmp_params.preamble_length = info->params.preamble_length;
1141 tmp_params.preamble = info->params.preamble;
1142 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1143 tmp_params.data_bits = info->params.data_bits;
1144 tmp_params.stop_bits = info->params.stop_bits;
1145 tmp_params.parity = info->params.parity;
1146 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1151 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1153 struct MGSL_PARAMS32 tmp_params;
1155 DBGINFO(("%s set_params32\n", info->device_name));
1156 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1159 spin_lock(&info->lock);
1160 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
1161 info->base_clock = tmp_params.clock_speed;
1163 info->params.mode = tmp_params.mode;
1164 info->params.loopback = tmp_params.loopback;
1165 info->params.flags = tmp_params.flags;
1166 info->params.encoding = tmp_params.encoding;
1167 info->params.clock_speed = tmp_params.clock_speed;
1168 info->params.addr_filter = tmp_params.addr_filter;
1169 info->params.crc_type = tmp_params.crc_type;
1170 info->params.preamble_length = tmp_params.preamble_length;
1171 info->params.preamble = tmp_params.preamble;
1172 info->params.data_rate = tmp_params.data_rate;
1173 info->params.data_bits = tmp_params.data_bits;
1174 info->params.stop_bits = tmp_params.stop_bits;
1175 info->params.parity = tmp_params.parity;
1177 spin_unlock(&info->lock);
1184 static long slgt_compat_ioctl(struct tty_struct *tty,
1185 unsigned int cmd, unsigned long arg)
1187 struct slgt_info *info = tty->driver_data;
1190 if (sanity_check(info, tty->name, "compat_ioctl"))
1192 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1195 case MGSL_IOCSPARAMS32:
1196 rc = set_params32(info, compat_ptr(arg));
1199 case MGSL_IOCGPARAMS32:
1200 rc = get_params32(info, compat_ptr(arg));
1203 case MGSL_IOCGPARAMS:
1204 case MGSL_IOCSPARAMS:
1205 case MGSL_IOCGTXIDLE:
1206 case MGSL_IOCGSTATS:
1207 case MGSL_IOCWAITEVENT:
1211 case MGSL_IOCWAITGPIO:
1212 case MGSL_IOCGXSYNC:
1213 case MGSL_IOCGXCTRL:
1214 rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg));
1217 rc = ioctl(tty, cmd, arg);
1219 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1223 #define slgt_compat_ioctl NULL
1224 #endif /* ifdef CONFIG_COMPAT */
1229 static inline void line_info(struct seq_file *m, struct slgt_info *info)
1232 unsigned long flags;
1234 seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1235 info->device_name, info->phys_reg_addr,
1236 info->irq_level, info->max_frame_size);
1238 /* output current serial signal states */
1239 spin_lock_irqsave(&info->lock,flags);
1241 spin_unlock_irqrestore(&info->lock,flags);
1245 if (info->signals & SerialSignal_RTS)
1246 strcat(stat_buf, "|RTS");
1247 if (info->signals & SerialSignal_CTS)
1248 strcat(stat_buf, "|CTS");
1249 if (info->signals & SerialSignal_DTR)
1250 strcat(stat_buf, "|DTR");
1251 if (info->signals & SerialSignal_DSR)
1252 strcat(stat_buf, "|DSR");
1253 if (info->signals & SerialSignal_DCD)
1254 strcat(stat_buf, "|CD");
1255 if (info->signals & SerialSignal_RI)
1256 strcat(stat_buf, "|RI");
1258 if (info->params.mode != MGSL_MODE_ASYNC) {
1259 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1260 info->icount.txok, info->icount.rxok);
1261 if (info->icount.txunder)
1262 seq_printf(m, " txunder:%d", info->icount.txunder);
1263 if (info->icount.txabort)
1264 seq_printf(m, " txabort:%d", info->icount.txabort);
1265 if (info->icount.rxshort)
1266 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1267 if (info->icount.rxlong)
1268 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1269 if (info->icount.rxover)
1270 seq_printf(m, " rxover:%d", info->icount.rxover);
1271 if (info->icount.rxcrc)
1272 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
1274 seq_printf(m, "\tASYNC tx:%d rx:%d",
1275 info->icount.tx, info->icount.rx);
1276 if (info->icount.frame)
1277 seq_printf(m, " fe:%d", info->icount.frame);
1278 if (info->icount.parity)
1279 seq_printf(m, " pe:%d", info->icount.parity);
1280 if (info->icount.brk)
1281 seq_printf(m, " brk:%d", info->icount.brk);
1282 if (info->icount.overrun)
1283 seq_printf(m, " oe:%d", info->icount.overrun);
1286 /* Append serial signal status to end */
1287 seq_printf(m, " %s\n", stat_buf+1);
1289 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1290 info->tx_active,info->bh_requested,info->bh_running,
1294 /* Called to print information about devices
1296 static int synclink_gt_proc_show(struct seq_file *m, void *v)
1298 struct slgt_info *info;
1300 seq_puts(m, "synclink_gt driver\n");
1302 info = slgt_device_list;
1305 info = info->next_device;
1311 * return count of bytes in transmit buffer
1313 static int chars_in_buffer(struct tty_struct *tty)
1315 struct slgt_info *info = tty->driver_data;
1317 if (sanity_check(info, tty->name, "chars_in_buffer"))
1319 count = tbuf_bytes(info);
1320 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1325 * signal remote device to throttle send data (our receive data)
1327 static void throttle(struct tty_struct * tty)
1329 struct slgt_info *info = tty->driver_data;
1330 unsigned long flags;
1332 if (sanity_check(info, tty->name, "throttle"))
1334 DBGINFO(("%s throttle\n", info->device_name));
1336 send_xchar(tty, STOP_CHAR(tty));
1337 if (C_CRTSCTS(tty)) {
1338 spin_lock_irqsave(&info->lock,flags);
1339 info->signals &= ~SerialSignal_RTS;
1341 spin_unlock_irqrestore(&info->lock,flags);
1346 * signal remote device to stop throttling send data (our receive data)
1348 static void unthrottle(struct tty_struct * tty)
1350 struct slgt_info *info = tty->driver_data;
1351 unsigned long flags;
1353 if (sanity_check(info, tty->name, "unthrottle"))
1355 DBGINFO(("%s unthrottle\n", info->device_name));
1360 send_xchar(tty, START_CHAR(tty));
1362 if (C_CRTSCTS(tty)) {
1363 spin_lock_irqsave(&info->lock,flags);
1364 info->signals |= SerialSignal_RTS;
1366 spin_unlock_irqrestore(&info->lock,flags);
1371 * set or clear transmit break condition
1372 * break_state -1=set break condition, 0=clear
1374 static int set_break(struct tty_struct *tty, int break_state)
1376 struct slgt_info *info = tty->driver_data;
1377 unsigned short value;
1378 unsigned long flags;
1380 if (sanity_check(info, tty->name, "set_break"))
1382 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1384 spin_lock_irqsave(&info->lock,flags);
1385 value = rd_reg16(info, TCR);
1386 if (break_state == -1)
1390 wr_reg16(info, TCR, value);
1391 spin_unlock_irqrestore(&info->lock,flags);
1395 #if SYNCLINK_GENERIC_HDLC
1398 * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1399 * @dev: pointer to network device structure
1400 * @encoding: serial encoding setting
1401 * @parity: FCS setting
1403 * Set encoding and frame check sequence (FCS) options.
1405 * Return: 0 if success, otherwise error code
1407 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1408 unsigned short parity)
1410 struct slgt_info *info = dev_to_port(dev);
1411 unsigned char new_encoding;
1412 unsigned short new_crctype;
1414 /* return error if TTY interface open */
1415 if (info->port.count)
1418 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1422 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1423 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1424 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1425 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1426 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1427 default: return -EINVAL;
1432 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1433 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1434 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1435 default: return -EINVAL;
1438 info->params.encoding = new_encoding;
1439 info->params.crc_type = new_crctype;
1441 /* if network interface up, reprogram hardware */
1449 * hdlcdev_xmit - called by generic HDLC layer to send a frame
1450 * @skb: socket buffer containing HDLC frame
1451 * @dev: pointer to network device structure
1453 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1454 struct net_device *dev)
1456 struct slgt_info *info = dev_to_port(dev);
1457 unsigned long flags;
1459 DBGINFO(("%s hdlc_xmit\n", dev->name));
1462 return NETDEV_TX_OK;
1464 /* stop sending until this frame completes */
1465 netif_stop_queue(dev);
1467 /* update network statistics */
1468 dev->stats.tx_packets++;
1469 dev->stats.tx_bytes += skb->len;
1471 /* save start time for transmit timeout detection */
1472 netif_trans_update(dev);
1474 spin_lock_irqsave(&info->lock, flags);
1475 tx_load(info, skb->data, skb->len);
1476 spin_unlock_irqrestore(&info->lock, flags);
1478 /* done with socket buffer, so free it */
1481 return NETDEV_TX_OK;
1485 * hdlcdev_open - called by network layer when interface enabled
1486 * @dev: pointer to network device structure
1488 * Claim resources and initialize hardware.
1490 * Return: 0 if success, otherwise error code
1492 static int hdlcdev_open(struct net_device *dev)
1494 struct slgt_info *info = dev_to_port(dev);
1496 unsigned long flags;
1498 if (!try_module_get(THIS_MODULE))
1501 DBGINFO(("%s hdlcdev_open\n", dev->name));
1503 /* generic HDLC layer open processing */
1504 rc = hdlc_open(dev);
1508 /* arbitrate between network and tty opens */
1509 spin_lock_irqsave(&info->netlock, flags);
1510 if (info->port.count != 0 || info->netcount != 0) {
1511 DBGINFO(("%s hdlc_open busy\n", dev->name));
1512 spin_unlock_irqrestore(&info->netlock, flags);
1516 spin_unlock_irqrestore(&info->netlock, flags);
1518 /* claim resources and init adapter */
1519 if ((rc = startup(info)) != 0) {
1520 spin_lock_irqsave(&info->netlock, flags);
1522 spin_unlock_irqrestore(&info->netlock, flags);
1526 /* assert RTS and DTR, apply hardware settings */
1527 info->signals |= SerialSignal_RTS | SerialSignal_DTR;
1530 /* enable network layer transmit */
1531 netif_trans_update(dev);
1532 netif_start_queue(dev);
1534 /* inform generic HDLC layer of current DCD status */
1535 spin_lock_irqsave(&info->lock, flags);
1537 spin_unlock_irqrestore(&info->lock, flags);
1538 if (info->signals & SerialSignal_DCD)
1539 netif_carrier_on(dev);
1541 netif_carrier_off(dev);
1546 * hdlcdev_close - called by network layer when interface is disabled
1547 * @dev: pointer to network device structure
1549 * Shutdown hardware and release resources.
1551 * Return: 0 if success, otherwise error code
1553 static int hdlcdev_close(struct net_device *dev)
1555 struct slgt_info *info = dev_to_port(dev);
1556 unsigned long flags;
1558 DBGINFO(("%s hdlcdev_close\n", dev->name));
1560 netif_stop_queue(dev);
1562 /* shutdown adapter and release resources */
1567 spin_lock_irqsave(&info->netlock, flags);
1569 spin_unlock_irqrestore(&info->netlock, flags);
1571 module_put(THIS_MODULE);
1576 * hdlcdev_ioctl - called by network layer to process IOCTL call to network device
1577 * @dev: pointer to network device structure
1578 * @ifr: pointer to network interface request structure
1579 * @cmd: IOCTL command code
1581 * Return: 0 if success, otherwise error code
1583 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1585 const size_t size = sizeof(sync_serial_settings);
1586 sync_serial_settings new_line;
1587 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1588 struct slgt_info *info = dev_to_port(dev);
1591 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1593 /* return error if TTY interface open */
1594 if (info->port.count)
1597 if (cmd != SIOCWANDEV)
1598 return hdlc_ioctl(dev, ifr, cmd);
1600 memset(&new_line, 0, sizeof(new_line));
1602 switch(ifr->ifr_settings.type) {
1603 case IF_GET_IFACE: /* return current sync_serial_settings */
1605 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1606 if (ifr->ifr_settings.size < size) {
1607 ifr->ifr_settings.size = size; /* data size wanted */
1611 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1612 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1613 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1614 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1617 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1618 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1619 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1620 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1621 default: new_line.clock_type = CLOCK_DEFAULT;
1624 new_line.clock_rate = info->params.clock_speed;
1625 new_line.loopback = info->params.loopback ? 1:0;
1627 if (copy_to_user(line, &new_line, size))
1631 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1633 if(!capable(CAP_NET_ADMIN))
1635 if (copy_from_user(&new_line, line, size))
1638 switch (new_line.clock_type)
1640 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1641 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1642 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1643 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1644 case CLOCK_DEFAULT: flags = info->params.flags &
1645 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1646 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1647 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1648 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1649 default: return -EINVAL;
1652 if (new_line.loopback != 0 && new_line.loopback != 1)
1655 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1656 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1657 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1658 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1659 info->params.flags |= flags;
1661 info->params.loopback = new_line.loopback;
1663 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1664 info->params.clock_speed = new_line.clock_rate;
1666 info->params.clock_speed = 0;
1668 /* if network interface up, reprogram hardware */
1674 return hdlc_ioctl(dev, ifr, cmd);
1679 * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected
1680 * @dev: pointer to network device structure
1682 static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
1684 struct slgt_info *info = dev_to_port(dev);
1685 unsigned long flags;
1687 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1689 dev->stats.tx_errors++;
1690 dev->stats.tx_aborted_errors++;
1692 spin_lock_irqsave(&info->lock,flags);
1694 spin_unlock_irqrestore(&info->lock,flags);
1696 netif_wake_queue(dev);
1700 * hdlcdev_tx_done - called by device driver when transmit completes
1701 * @info: pointer to device instance information
1703 * Reenable network layer transmit if stopped.
1705 static void hdlcdev_tx_done(struct slgt_info *info)
1707 if (netif_queue_stopped(info->netdev))
1708 netif_wake_queue(info->netdev);
1712 * hdlcdev_rx - called by device driver when frame received
1713 * @info: pointer to device instance information
1714 * @buf: pointer to buffer contianing frame data
1715 * @size: count of data bytes in buf
1717 * Pass frame to network layer.
1719 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1721 struct sk_buff *skb = dev_alloc_skb(size);
1722 struct net_device *dev = info->netdev;
1724 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1727 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1728 dev->stats.rx_dropped++;
1732 skb_put_data(skb, buf, size);
1734 skb->protocol = hdlc_type_trans(skb, dev);
1736 dev->stats.rx_packets++;
1737 dev->stats.rx_bytes += size;
1742 static const struct net_device_ops hdlcdev_ops = {
1743 .ndo_open = hdlcdev_open,
1744 .ndo_stop = hdlcdev_close,
1745 .ndo_start_xmit = hdlc_start_xmit,
1746 .ndo_do_ioctl = hdlcdev_ioctl,
1747 .ndo_tx_timeout = hdlcdev_tx_timeout,
1751 * hdlcdev_init - called by device driver when adding device instance
1752 * @info: pointer to device instance information
1754 * Do generic HDLC initialization.
1756 * Return: 0 if success, otherwise error code
1758 static int hdlcdev_init(struct slgt_info *info)
1761 struct net_device *dev;
1764 /* allocate and initialize network and HDLC layer objects */
1766 dev = alloc_hdlcdev(info);
1768 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1772 /* for network layer reporting purposes only */
1773 dev->mem_start = info->phys_reg_addr;
1774 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1775 dev->irq = info->irq_level;
1777 /* network layer callbacks and settings */
1778 dev->netdev_ops = &hdlcdev_ops;
1779 dev->watchdog_timeo = 10 * HZ;
1780 dev->tx_queue_len = 50;
1782 /* generic HDLC layer callbacks and settings */
1783 hdlc = dev_to_hdlc(dev);
1784 hdlc->attach = hdlcdev_attach;
1785 hdlc->xmit = hdlcdev_xmit;
1787 /* register objects with HDLC layer */
1788 rc = register_hdlc_device(dev);
1790 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1800 * hdlcdev_exit - called by device driver when removing device instance
1801 * @info: pointer to device instance information
1803 * Do generic HDLC cleanup.
1805 static void hdlcdev_exit(struct slgt_info *info)
1807 unregister_hdlc_device(info->netdev);
1808 free_netdev(info->netdev);
1809 info->netdev = NULL;
1812 #endif /* ifdef CONFIG_HDLC */
1815 * get async data from rx DMA buffers
1817 static void rx_async(struct slgt_info *info)
1819 struct mgsl_icount *icount = &info->icount;
1820 unsigned int start, end;
1822 unsigned char status;
1823 struct slgt_desc *bufs = info->rbufs;
1829 start = end = info->rbuf_current;
1831 while(desc_complete(bufs[end])) {
1832 count = desc_count(bufs[end]) - info->rbuf_index;
1833 p = bufs[end].buf + info->rbuf_index;
1835 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1836 DBGDATA(info, p, count, "rx");
1838 for(i=0 ; i < count; i+=2, p+=2) {
1844 status = *(p + 1) & (BIT1 + BIT0);
1848 else if (status & BIT0)
1850 /* discard char if tty control flags say so */
1851 if (status & info->ignore_status_mask)
1855 else if (status & BIT0)
1858 tty_insert_flip_char(&info->port, ch, stat);
1863 /* receive buffer not completed */
1864 info->rbuf_index += i;
1865 mod_timer(&info->rx_timer, jiffies + 1);
1869 info->rbuf_index = 0;
1870 free_rbufs(info, end, end);
1872 if (++end == info->rbuf_count)
1875 /* if entire list searched then no frame available */
1881 tty_flip_buffer_push(&info->port);
1885 * return next bottom half action to perform
1887 static int bh_action(struct slgt_info *info)
1889 unsigned long flags;
1892 spin_lock_irqsave(&info->lock,flags);
1894 if (info->pending_bh & BH_RECEIVE) {
1895 info->pending_bh &= ~BH_RECEIVE;
1897 } else if (info->pending_bh & BH_TRANSMIT) {
1898 info->pending_bh &= ~BH_TRANSMIT;
1900 } else if (info->pending_bh & BH_STATUS) {
1901 info->pending_bh &= ~BH_STATUS;
1904 /* Mark BH routine as complete */
1905 info->bh_running = false;
1906 info->bh_requested = false;
1910 spin_unlock_irqrestore(&info->lock,flags);
1916 * perform bottom half processing
1918 static void bh_handler(struct work_struct *work)
1920 struct slgt_info *info = container_of(work, struct slgt_info, task);
1923 info->bh_running = true;
1925 while((action = bh_action(info))) {
1928 DBGBH(("%s bh receive\n", info->device_name));
1929 switch(info->params.mode) {
1930 case MGSL_MODE_ASYNC:
1933 case MGSL_MODE_HDLC:
1934 while(rx_get_frame(info));
1937 case MGSL_MODE_MONOSYNC:
1938 case MGSL_MODE_BISYNC:
1939 case MGSL_MODE_XSYNC:
1940 while(rx_get_buf(info));
1943 /* restart receiver if rx DMA buffers exhausted */
1944 if (info->rx_restart)
1951 DBGBH(("%s bh status\n", info->device_name));
1952 info->ri_chkcount = 0;
1953 info->dsr_chkcount = 0;
1954 info->dcd_chkcount = 0;
1955 info->cts_chkcount = 0;
1958 DBGBH(("%s unknown action\n", info->device_name));
1962 DBGBH(("%s bh_handler exit\n", info->device_name));
1965 static void bh_transmit(struct slgt_info *info)
1967 struct tty_struct *tty = info->port.tty;
1969 DBGBH(("%s bh_transmit\n", info->device_name));
1974 static void dsr_change(struct slgt_info *info, unsigned short status)
1976 if (status & BIT3) {
1977 info->signals |= SerialSignal_DSR;
1978 info->input_signal_events.dsr_up++;
1980 info->signals &= ~SerialSignal_DSR;
1981 info->input_signal_events.dsr_down++;
1983 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
1984 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
1985 slgt_irq_off(info, IRQ_DSR);
1989 wake_up_interruptible(&info->status_event_wait_q);
1990 wake_up_interruptible(&info->event_wait_q);
1991 info->pending_bh |= BH_STATUS;
1994 static void cts_change(struct slgt_info *info, unsigned short status)
1996 if (status & BIT2) {
1997 info->signals |= SerialSignal_CTS;
1998 info->input_signal_events.cts_up++;
2000 info->signals &= ~SerialSignal_CTS;
2001 info->input_signal_events.cts_down++;
2003 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2004 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2005 slgt_irq_off(info, IRQ_CTS);
2009 wake_up_interruptible(&info->status_event_wait_q);
2010 wake_up_interruptible(&info->event_wait_q);
2011 info->pending_bh |= BH_STATUS;
2013 if (tty_port_cts_enabled(&info->port)) {
2014 if (info->port.tty) {
2015 if (info->port.tty->hw_stopped) {
2016 if (info->signals & SerialSignal_CTS) {
2017 info->port.tty->hw_stopped = 0;
2018 info->pending_bh |= BH_TRANSMIT;
2022 if (!(info->signals & SerialSignal_CTS))
2023 info->port.tty->hw_stopped = 1;
2029 static void dcd_change(struct slgt_info *info, unsigned short status)
2031 if (status & BIT1) {
2032 info->signals |= SerialSignal_DCD;
2033 info->input_signal_events.dcd_up++;
2035 info->signals &= ~SerialSignal_DCD;
2036 info->input_signal_events.dcd_down++;
2038 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2039 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2040 slgt_irq_off(info, IRQ_DCD);
2044 #if SYNCLINK_GENERIC_HDLC
2045 if (info->netcount) {
2046 if (info->signals & SerialSignal_DCD)
2047 netif_carrier_on(info->netdev);
2049 netif_carrier_off(info->netdev);
2052 wake_up_interruptible(&info->status_event_wait_q);
2053 wake_up_interruptible(&info->event_wait_q);
2054 info->pending_bh |= BH_STATUS;
2056 if (tty_port_check_carrier(&info->port)) {
2057 if (info->signals & SerialSignal_DCD)
2058 wake_up_interruptible(&info->port.open_wait);
2061 tty_hangup(info->port.tty);
2066 static void ri_change(struct slgt_info *info, unsigned short status)
2068 if (status & BIT0) {
2069 info->signals |= SerialSignal_RI;
2070 info->input_signal_events.ri_up++;
2072 info->signals &= ~SerialSignal_RI;
2073 info->input_signal_events.ri_down++;
2075 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2076 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2077 slgt_irq_off(info, IRQ_RI);
2081 wake_up_interruptible(&info->status_event_wait_q);
2082 wake_up_interruptible(&info->event_wait_q);
2083 info->pending_bh |= BH_STATUS;
2086 static void isr_rxdata(struct slgt_info *info)
2088 unsigned int count = info->rbuf_fill_count;
2089 unsigned int i = info->rbuf_fill_index;
2092 while (rd_reg16(info, SSR) & IRQ_RXDATA) {
2093 reg = rd_reg16(info, RDR);
2094 DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
2095 if (desc_complete(info->rbufs[i])) {
2096 /* all buffers full */
2098 info->rx_restart = true;
2101 info->rbufs[i].buf[count++] = (unsigned char)reg;
2102 /* async mode saves status byte to buffer for each data byte */
2103 if (info->params.mode == MGSL_MODE_ASYNC)
2104 info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
2105 if (count == info->rbuf_fill_level || (reg & BIT10)) {
2106 /* buffer full or end of frame */
2107 set_desc_count(info->rbufs[i], count);
2108 set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
2109 info->rbuf_fill_count = count = 0;
2110 if (++i == info->rbuf_count)
2112 info->pending_bh |= BH_RECEIVE;
2116 info->rbuf_fill_index = i;
2117 info->rbuf_fill_count = count;
2120 static void isr_serial(struct slgt_info *info)
2122 unsigned short status = rd_reg16(info, SSR);
2124 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2126 wr_reg16(info, SSR, status); /* clear pending */
2128 info->irq_occurred = true;
2130 if (info->params.mode == MGSL_MODE_ASYNC) {
2131 if (status & IRQ_TXIDLE) {
2132 if (info->tx_active)
2133 isr_txeom(info, status);
2135 if (info->rx_pio && (status & IRQ_RXDATA))
2137 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2139 /* process break detection if tty control allows */
2140 if (info->port.tty) {
2141 if (!(status & info->ignore_status_mask)) {
2142 if (info->read_status_mask & MASK_BREAK) {
2143 tty_insert_flip_char(&info->port, 0, TTY_BREAK);
2144 if (info->port.flags & ASYNC_SAK)
2145 do_SAK(info->port.tty);
2151 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2152 isr_txeom(info, status);
2153 if (info->rx_pio && (status & IRQ_RXDATA))
2155 if (status & IRQ_RXIDLE) {
2156 if (status & RXIDLE)
2157 info->icount.rxidle++;
2159 info->icount.exithunt++;
2160 wake_up_interruptible(&info->event_wait_q);
2163 if (status & IRQ_RXOVER)
2167 if (status & IRQ_DSR)
2168 dsr_change(info, status);
2169 if (status & IRQ_CTS)
2170 cts_change(info, status);
2171 if (status & IRQ_DCD)
2172 dcd_change(info, status);
2173 if (status & IRQ_RI)
2174 ri_change(info, status);
2177 static void isr_rdma(struct slgt_info *info)
2179 unsigned int status = rd_reg32(info, RDCSR);
2181 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2183 /* RDCSR (rx DMA control/status)
2186 * 06 save status byte to DMA buffer
2188 * 04 eol (end of list)
2189 * 03 eob (end of buffer)
2194 wr_reg32(info, RDCSR, status); /* clear pending */
2196 if (status & (BIT5 + BIT4)) {
2197 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2198 info->rx_restart = true;
2200 info->pending_bh |= BH_RECEIVE;
2203 static void isr_tdma(struct slgt_info *info)
2205 unsigned int status = rd_reg32(info, TDCSR);
2207 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2209 /* TDCSR (tx DMA control/status)
2213 * 04 eol (end of list)
2214 * 03 eob (end of buffer)
2219 wr_reg32(info, TDCSR, status); /* clear pending */
2221 if (status & (BIT5 + BIT4 + BIT3)) {
2222 // another transmit buffer has completed
2223 // run bottom half to get more send data from user
2224 info->pending_bh |= BH_TRANSMIT;
2229 * return true if there are unsent tx DMA buffers, otherwise false
2231 * if there are unsent buffers then info->tbuf_start
2232 * is set to index of first unsent buffer
2234 static bool unsent_tbufs(struct slgt_info *info)
2236 unsigned int i = info->tbuf_current;
2240 * search backwards from last loaded buffer (precedes tbuf_current)
2241 * for first unsent buffer (desc_count > 0)
2248 i = info->tbuf_count - 1;
2249 if (!desc_count(info->tbufs[i]))
2251 info->tbuf_start = i;
2253 } while (i != info->tbuf_current);
2258 static void isr_txeom(struct slgt_info *info, unsigned short status)
2260 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2262 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2264 if (status & IRQ_TXUNDER) {
2265 unsigned short val = rd_reg16(info, TCR);
2266 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2267 wr_reg16(info, TCR, val); /* clear reset bit */
2270 if (info->tx_active) {
2271 if (info->params.mode != MGSL_MODE_ASYNC) {
2272 if (status & IRQ_TXUNDER)
2273 info->icount.txunder++;
2274 else if (status & IRQ_TXIDLE)
2275 info->icount.txok++;
2278 if (unsent_tbufs(info)) {
2280 update_tx_timer(info);
2283 info->tx_active = false;
2285 del_timer(&info->tx_timer);
2287 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2288 info->signals &= ~SerialSignal_RTS;
2289 info->drop_rts_on_tx_done = false;
2293 #if SYNCLINK_GENERIC_HDLC
2295 hdlcdev_tx_done(info);
2299 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2303 info->pending_bh |= BH_TRANSMIT;
2308 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2310 struct cond_wait *w, *prev;
2312 /* wake processes waiting for specific transitions */
2313 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2314 if (w->data & changed) {
2316 wake_up_interruptible(&w->q);
2318 prev->next = w->next;
2320 info->gpio_wait_q = w->next;
2326 /* interrupt service routine
2328 * irq interrupt number
2329 * dev_id device ID supplied during interrupt registration
2331 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2333 struct slgt_info *info = dev_id;
2337 DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2339 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2340 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2341 info->irq_occurred = true;
2342 for(i=0; i < info->port_count ; i++) {
2343 if (info->port_array[i] == NULL)
2345 spin_lock(&info->port_array[i]->lock);
2346 if (gsr & (BIT8 << i))
2347 isr_serial(info->port_array[i]);
2348 if (gsr & (BIT16 << (i*2)))
2349 isr_rdma(info->port_array[i]);
2350 if (gsr & (BIT17 << (i*2)))
2351 isr_tdma(info->port_array[i]);
2352 spin_unlock(&info->port_array[i]->lock);
2356 if (info->gpio_present) {
2358 unsigned int changed;
2359 spin_lock(&info->lock);
2360 while ((changed = rd_reg32(info, IOSR)) != 0) {
2361 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2362 /* read latched state of GPIO signals */
2363 state = rd_reg32(info, IOVR);
2364 /* clear pending GPIO interrupt bits */
2365 wr_reg32(info, IOSR, changed);
2366 for (i=0 ; i < info->port_count ; i++) {
2367 if (info->port_array[i] != NULL)
2368 isr_gpio(info->port_array[i], changed, state);
2371 spin_unlock(&info->lock);
2374 for(i=0; i < info->port_count ; i++) {
2375 struct slgt_info *port = info->port_array[i];
2378 spin_lock(&port->lock);
2379 if ((port->port.count || port->netcount) &&
2380 port->pending_bh && !port->bh_running &&
2381 !port->bh_requested) {
2382 DBGISR(("%s bh queued\n", port->device_name));
2383 schedule_work(&port->task);
2384 port->bh_requested = true;
2386 spin_unlock(&port->lock);
2389 DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2393 static int startup(struct slgt_info *info)
2395 DBGINFO(("%s startup\n", info->device_name));
2397 if (tty_port_initialized(&info->port))
2400 if (!info->tx_buf) {
2401 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2402 if (!info->tx_buf) {
2403 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2408 info->pending_bh = 0;
2410 memset(&info->icount, 0, sizeof(info->icount));
2412 /* program hardware for current parameters */
2413 change_params(info);
2416 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2418 tty_port_set_initialized(&info->port, 1);
2424 * called by close() and hangup() to shutdown hardware
2426 static void shutdown(struct slgt_info *info)
2428 unsigned long flags;
2430 if (!tty_port_initialized(&info->port))
2433 DBGINFO(("%s shutdown\n", info->device_name));
2435 /* clear status wait queue because status changes */
2436 /* can't happen after shutting down the hardware */
2437 wake_up_interruptible(&info->status_event_wait_q);
2438 wake_up_interruptible(&info->event_wait_q);
2440 del_timer_sync(&info->tx_timer);
2441 del_timer_sync(&info->rx_timer);
2443 kfree(info->tx_buf);
2444 info->tx_buf = NULL;
2446 spin_lock_irqsave(&info->lock,flags);
2451 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2453 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
2454 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2458 flush_cond_wait(&info->gpio_wait_q);
2460 spin_unlock_irqrestore(&info->lock,flags);
2463 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2465 tty_port_set_initialized(&info->port, 0);
2468 static void program_hw(struct slgt_info *info)
2470 unsigned long flags;
2472 spin_lock_irqsave(&info->lock,flags);
2477 if (info->params.mode != MGSL_MODE_ASYNC ||
2485 info->dcd_chkcount = 0;
2486 info->cts_chkcount = 0;
2487 info->ri_chkcount = 0;
2488 info->dsr_chkcount = 0;
2490 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2493 if (info->netcount ||
2494 (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
2497 spin_unlock_irqrestore(&info->lock,flags);
2501 * reconfigure adapter based on new parameters
2503 static void change_params(struct slgt_info *info)
2508 if (!info->port.tty)
2510 DBGINFO(("%s change_params\n", info->device_name));
2512 cflag = info->port.tty->termios.c_cflag;
2514 /* if B0 rate (hangup) specified then negate RTS and DTR */
2515 /* otherwise assert RTS and DTR */
2517 info->signals |= SerialSignal_RTS | SerialSignal_DTR;
2519 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2521 /* byte size and parity */
2523 switch (cflag & CSIZE) {
2524 case CS5: info->params.data_bits = 5; break;
2525 case CS6: info->params.data_bits = 6; break;
2526 case CS7: info->params.data_bits = 7; break;
2527 case CS8: info->params.data_bits = 8; break;
2528 default: info->params.data_bits = 7; break;
2531 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2534 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2536 info->params.parity = ASYNC_PARITY_NONE;
2538 /* calculate number of jiffies to transmit a full
2539 * FIFO (32 bytes) at specified data rate
2541 bits_per_char = info->params.data_bits +
2542 info->params.stop_bits + 1;
2544 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2546 if (info->params.data_rate) {
2547 info->timeout = (32*HZ*bits_per_char) /
2548 info->params.data_rate;
2550 info->timeout += HZ/50; /* Add .02 seconds of slop */
2552 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
2553 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
2555 /* process tty input control flags */
2557 info->read_status_mask = IRQ_RXOVER;
2558 if (I_INPCK(info->port.tty))
2559 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2560 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2561 info->read_status_mask |= MASK_BREAK;
2562 if (I_IGNPAR(info->port.tty))
2563 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2564 if (I_IGNBRK(info->port.tty)) {
2565 info->ignore_status_mask |= MASK_BREAK;
2566 /* If ignoring parity and break indicators, ignore
2567 * overruns too. (For real raw support).
2569 if (I_IGNPAR(info->port.tty))
2570 info->ignore_status_mask |= MASK_OVERRUN;
2576 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2578 DBGINFO(("%s get_stats\n", info->device_name));
2580 memset(&info->icount, 0, sizeof(info->icount));
2582 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2588 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2590 DBGINFO(("%s get_params\n", info->device_name));
2591 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2596 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2598 unsigned long flags;
2599 MGSL_PARAMS tmp_params;
2601 DBGINFO(("%s set_params\n", info->device_name));
2602 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2605 spin_lock_irqsave(&info->lock, flags);
2606 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
2607 info->base_clock = tmp_params.clock_speed;
2609 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2610 spin_unlock_irqrestore(&info->lock, flags);
2617 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2619 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2620 if (put_user(info->idle_mode, idle_mode))
2625 static int set_txidle(struct slgt_info *info, int idle_mode)
2627 unsigned long flags;
2628 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2629 spin_lock_irqsave(&info->lock,flags);
2630 info->idle_mode = idle_mode;
2631 if (info->params.mode != MGSL_MODE_ASYNC)
2633 spin_unlock_irqrestore(&info->lock,flags);
2637 static int tx_enable(struct slgt_info *info, int enable)
2639 unsigned long flags;
2640 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2641 spin_lock_irqsave(&info->lock,flags);
2643 if (!info->tx_enabled)
2646 if (info->tx_enabled)
2649 spin_unlock_irqrestore(&info->lock,flags);
2654 * abort transmit HDLC frame
2656 static int tx_abort(struct slgt_info *info)
2658 unsigned long flags;
2659 DBGINFO(("%s tx_abort\n", info->device_name));
2660 spin_lock_irqsave(&info->lock,flags);
2662 spin_unlock_irqrestore(&info->lock,flags);
2666 static int rx_enable(struct slgt_info *info, int enable)
2668 unsigned long flags;
2669 unsigned int rbuf_fill_level;
2670 DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2671 spin_lock_irqsave(&info->lock,flags);
2673 * enable[31..16] = receive DMA buffer fill level
2674 * 0 = noop (leave fill level unchanged)
2675 * fill level must be multiple of 4 and <= buffer size
2677 rbuf_fill_level = ((unsigned int)enable) >> 16;
2678 if (rbuf_fill_level) {
2679 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2680 spin_unlock_irqrestore(&info->lock, flags);
2683 info->rbuf_fill_level = rbuf_fill_level;
2684 if (rbuf_fill_level < 128)
2685 info->rx_pio = 1; /* PIO mode */
2687 info->rx_pio = 0; /* DMA mode */
2688 rx_stop(info); /* restart receiver to use new fill level */
2692 * enable[1..0] = receiver enable command
2695 * 2 = enable or force hunt mode if already enabled
2699 if (!info->rx_enabled)
2701 else if (enable == 2) {
2702 /* force hunt mode (write 1 to RCR[3]) */
2703 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2706 if (info->rx_enabled)
2709 spin_unlock_irqrestore(&info->lock,flags);
2714 * wait for specified event to occur
2716 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2718 unsigned long flags;
2721 struct mgsl_icount cprev, cnow;
2724 struct _input_signal_events oldsigs, newsigs;
2725 DECLARE_WAITQUEUE(wait, current);
2727 if (get_user(mask, mask_ptr))
2730 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2732 spin_lock_irqsave(&info->lock,flags);
2734 /* return immediately if state matches requested events */
2739 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2740 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2741 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2742 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2744 spin_unlock_irqrestore(&info->lock,flags);
2748 /* save current irq counts */
2749 cprev = info->icount;
2750 oldsigs = info->input_signal_events;
2752 /* enable hunt and idle irqs if needed */
2753 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2754 unsigned short val = rd_reg16(info, SCR);
2755 if (!(val & IRQ_RXIDLE))
2756 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2759 set_current_state(TASK_INTERRUPTIBLE);
2760 add_wait_queue(&info->event_wait_q, &wait);
2762 spin_unlock_irqrestore(&info->lock,flags);
2766 if (signal_pending(current)) {
2771 /* get current irq counts */
2772 spin_lock_irqsave(&info->lock,flags);
2773 cnow = info->icount;
2774 newsigs = info->input_signal_events;
2775 set_current_state(TASK_INTERRUPTIBLE);
2776 spin_unlock_irqrestore(&info->lock,flags);
2778 /* if no change, wait aborted for some reason */
2779 if (newsigs.dsr_up == oldsigs.dsr_up &&
2780 newsigs.dsr_down == oldsigs.dsr_down &&
2781 newsigs.dcd_up == oldsigs.dcd_up &&
2782 newsigs.dcd_down == oldsigs.dcd_down &&
2783 newsigs.cts_up == oldsigs.cts_up &&
2784 newsigs.cts_down == oldsigs.cts_down &&
2785 newsigs.ri_up == oldsigs.ri_up &&
2786 newsigs.ri_down == oldsigs.ri_down &&
2787 cnow.exithunt == cprev.exithunt &&
2788 cnow.rxidle == cprev.rxidle) {
2794 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2795 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2796 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2797 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2798 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2799 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2800 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2801 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2802 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2803 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2811 remove_wait_queue(&info->event_wait_q, &wait);
2812 set_current_state(TASK_RUNNING);
2815 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2816 spin_lock_irqsave(&info->lock,flags);
2817 if (!waitqueue_active(&info->event_wait_q)) {
2818 /* disable enable exit hunt mode/idle rcvd IRQs */
2820 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2822 spin_unlock_irqrestore(&info->lock,flags);
2826 rc = put_user(events, mask_ptr);
2830 static int get_interface(struct slgt_info *info, int __user *if_mode)
2832 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2833 if (put_user(info->if_mode, if_mode))
2838 static int set_interface(struct slgt_info *info, int if_mode)
2840 unsigned long flags;
2843 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2844 spin_lock_irqsave(&info->lock,flags);
2845 info->if_mode = if_mode;
2849 /* TCR (tx control) 07 1=RTS driver control */
2850 val = rd_reg16(info, TCR);
2851 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2855 wr_reg16(info, TCR, val);
2857 spin_unlock_irqrestore(&info->lock,flags);
2861 static int get_xsync(struct slgt_info *info, int __user *xsync)
2863 DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync));
2864 if (put_user(info->xsync, xsync))
2870 * set extended sync pattern (1 to 4 bytes) for extended sync mode
2872 * sync pattern is contained in least significant bytes of value
2873 * most significant byte of sync pattern is oldest (1st sent/detected)
2875 static int set_xsync(struct slgt_info *info, int xsync)
2877 unsigned long flags;
2879 DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync));
2880 spin_lock_irqsave(&info->lock, flags);
2881 info->xsync = xsync;
2882 wr_reg32(info, XSR, xsync);
2883 spin_unlock_irqrestore(&info->lock, flags);
2887 static int get_xctrl(struct slgt_info *info, int __user *xctrl)
2889 DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl));
2890 if (put_user(info->xctrl, xctrl))
2896 * set extended control options
2898 * xctrl[31:19] reserved, must be zero
2899 * xctrl[18:17] extended sync pattern length in bytes
2900 * 00 = 1 byte in xsr[7:0]
2901 * 01 = 2 bytes in xsr[15:0]
2902 * 10 = 3 bytes in xsr[23:0]
2903 * 11 = 4 bytes in xsr[31:0]
2904 * xctrl[16] 1 = enable terminal count, 0=disabled
2905 * xctrl[15:0] receive terminal count for fixed length packets
2906 * value is count minus one (0 = 1 byte packet)
2907 * when terminal count is reached, receiver
2908 * automatically returns to hunt mode and receive
2909 * FIFO contents are flushed to DMA buffers with
2910 * end of frame (EOF) status
2912 static int set_xctrl(struct slgt_info *info, int xctrl)
2914 unsigned long flags;
2916 DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl));
2917 spin_lock_irqsave(&info->lock, flags);
2918 info->xctrl = xctrl;
2919 wr_reg32(info, XCR, xctrl);
2920 spin_unlock_irqrestore(&info->lock, flags);
2925 * set general purpose IO pin state and direction
2928 * state each bit indicates a pin state
2929 * smask set bit indicates pin state to set
2930 * dir each bit indicates a pin direction (0=input, 1=output)
2931 * dmask set bit indicates pin direction to set
2933 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2935 unsigned long flags;
2936 struct gpio_desc gpio;
2939 if (!info->gpio_present)
2941 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2943 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2944 info->device_name, gpio.state, gpio.smask,
2945 gpio.dir, gpio.dmask));
2947 spin_lock_irqsave(&info->port_array[0]->lock, flags);
2949 data = rd_reg32(info, IODR);
2950 data |= gpio.dmask & gpio.dir;
2951 data &= ~(gpio.dmask & ~gpio.dir);
2952 wr_reg32(info, IODR, data);
2955 data = rd_reg32(info, IOVR);
2956 data |= gpio.smask & gpio.state;
2957 data &= ~(gpio.smask & ~gpio.state);
2958 wr_reg32(info, IOVR, data);
2960 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
2966 * get general purpose IO pin state and direction
2968 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2970 struct gpio_desc gpio;
2971 if (!info->gpio_present)
2973 gpio.state = rd_reg32(info, IOVR);
2974 gpio.smask = 0xffffffff;
2975 gpio.dir = rd_reg32(info, IODR);
2976 gpio.dmask = 0xffffffff;
2977 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2979 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2980 info->device_name, gpio.state, gpio.dir));
2985 * conditional wait facility
2987 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2989 init_waitqueue_head(&w->q);
2990 init_waitqueue_entry(&w->wait, current);
2994 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2996 set_current_state(TASK_INTERRUPTIBLE);
2997 add_wait_queue(&w->q, &w->wait);
3002 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
3004 struct cond_wait *w, *prev;
3005 remove_wait_queue(&cw->q, &cw->wait);
3006 set_current_state(TASK_RUNNING);
3007 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
3010 prev->next = w->next;
3018 static void flush_cond_wait(struct cond_wait **head)
3020 while (*head != NULL) {
3021 wake_up_interruptible(&(*head)->q);
3022 *head = (*head)->next;
3027 * wait for general purpose I/O pin(s) to enter specified state
3030 * state - bit indicates target pin state
3031 * smask - set bit indicates watched pin
3033 * The wait ends when at least one watched pin enters the specified
3034 * state. When 0 (no error) is returned, user_gpio->state is set to the
3035 * state of all GPIO pins when the wait ends.
3037 * Note: Each pin may be a dedicated input, dedicated output, or
3038 * configurable input/output. The number and configuration of pins
3039 * varies with the specific adapter model. Only input pins (dedicated
3040 * or configured) can be monitored with this function.
3042 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
3044 unsigned long flags;
3046 struct gpio_desc gpio;
3047 struct cond_wait wait;
3050 if (!info->gpio_present)
3052 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
3054 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
3055 info->device_name, gpio.state, gpio.smask));
3056 /* ignore output pins identified by set IODR bit */
3057 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
3059 init_cond_wait(&wait, gpio.smask);
3061 spin_lock_irqsave(&info->port_array[0]->lock, flags);
3062 /* enable interrupts for watched pins */
3063 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
3064 /* get current pin states */
3065 state = rd_reg32(info, IOVR);
3067 if (gpio.smask & ~(state ^ gpio.state)) {
3068 /* already in target state */
3071 /* wait for target state */
3072 add_cond_wait(&info->gpio_wait_q, &wait);
3073 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3075 if (signal_pending(current))
3078 gpio.state = wait.data;
3079 spin_lock_irqsave(&info->port_array[0]->lock, flags);
3080 remove_cond_wait(&info->gpio_wait_q, &wait);
3083 /* disable all GPIO interrupts if no waiting processes */
3084 if (info->gpio_wait_q == NULL)
3085 wr_reg32(info, IOER, 0);
3086 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3088 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3093 static int modem_input_wait(struct slgt_info *info,int arg)
3095 unsigned long flags;
3097 struct mgsl_icount cprev, cnow;
3098 DECLARE_WAITQUEUE(wait, current);
3100 /* save current irq counts */
3101 spin_lock_irqsave(&info->lock,flags);
3102 cprev = info->icount;
3103 add_wait_queue(&info->status_event_wait_q, &wait);
3104 set_current_state(TASK_INTERRUPTIBLE);
3105 spin_unlock_irqrestore(&info->lock,flags);
3109 if (signal_pending(current)) {
3114 /* get new irq counts */
3115 spin_lock_irqsave(&info->lock,flags);
3116 cnow = info->icount;
3117 set_current_state(TASK_INTERRUPTIBLE);
3118 spin_unlock_irqrestore(&info->lock,flags);
3120 /* if no change, wait aborted for some reason */
3121 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3122 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3127 /* check for change in caller specified modem input */
3128 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3129 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3130 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3131 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3138 remove_wait_queue(&info->status_event_wait_q, &wait);
3139 set_current_state(TASK_RUNNING);
3144 * return state of serial control and status signals
3146 static int tiocmget(struct tty_struct *tty)
3148 struct slgt_info *info = tty->driver_data;
3149 unsigned int result;
3150 unsigned long flags;
3152 spin_lock_irqsave(&info->lock,flags);
3154 spin_unlock_irqrestore(&info->lock,flags);
3156 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3157 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3158 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3159 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3160 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3161 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3163 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3168 * set modem control signals (DTR/RTS)
3170 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3171 * TIOCMSET = set/clear signal values
3172 * value bit mask for command
3174 static int tiocmset(struct tty_struct *tty,
3175 unsigned int set, unsigned int clear)
3177 struct slgt_info *info = tty->driver_data;
3178 unsigned long flags;
3180 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3182 if (set & TIOCM_RTS)
3183 info->signals |= SerialSignal_RTS;
3184 if (set & TIOCM_DTR)
3185 info->signals |= SerialSignal_DTR;
3186 if (clear & TIOCM_RTS)
3187 info->signals &= ~SerialSignal_RTS;
3188 if (clear & TIOCM_DTR)
3189 info->signals &= ~SerialSignal_DTR;
3191 spin_lock_irqsave(&info->lock,flags);
3193 spin_unlock_irqrestore(&info->lock,flags);
3197 static int carrier_raised(struct tty_port *port)
3199 unsigned long flags;
3200 struct slgt_info *info = container_of(port, struct slgt_info, port);
3202 spin_lock_irqsave(&info->lock,flags);
3204 spin_unlock_irqrestore(&info->lock,flags);
3205 return (info->signals & SerialSignal_DCD) ? 1 : 0;
3208 static void dtr_rts(struct tty_port *port, int on)
3210 unsigned long flags;
3211 struct slgt_info *info = container_of(port, struct slgt_info, port);
3213 spin_lock_irqsave(&info->lock,flags);
3215 info->signals |= SerialSignal_RTS | SerialSignal_DTR;
3217 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3219 spin_unlock_irqrestore(&info->lock,flags);
3224 * block current process until the device is ready to open
3226 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3227 struct slgt_info *info)
3229 DECLARE_WAITQUEUE(wait, current);
3231 bool do_clocal = false;
3232 unsigned long flags;
3234 struct tty_port *port = &info->port;
3236 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3238 if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
3239 /* nonblock mode is set or port is not enabled */
3240 tty_port_set_active(port, 1);
3247 /* Wait for carrier detect and the line to become
3248 * free (i.e., not in use by the callout). While we are in
3249 * this loop, port->count is dropped by one, so that
3250 * close() knows when to free things. We restore it upon
3251 * exit, either normal or abnormal.
3255 add_wait_queue(&port->open_wait, &wait);
3257 spin_lock_irqsave(&info->lock, flags);
3259 spin_unlock_irqrestore(&info->lock, flags);
3260 port->blocked_open++;
3263 if (C_BAUD(tty) && tty_port_initialized(port))
3264 tty_port_raise_dtr_rts(port);
3266 set_current_state(TASK_INTERRUPTIBLE);
3268 if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
3269 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3270 -EAGAIN : -ERESTARTSYS;
3274 cd = tty_port_carrier_raised(port);
3275 if (do_clocal || cd)
3278 if (signal_pending(current)) {
3279 retval = -ERESTARTSYS;
3283 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3289 set_current_state(TASK_RUNNING);
3290 remove_wait_queue(&port->open_wait, &wait);
3292 if (!tty_hung_up_p(filp))
3294 port->blocked_open--;
3297 tty_port_set_active(port, 1);
3299 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3304 * allocate buffers used for calling line discipline receive_buf
3305 * directly in synchronous mode
3306 * note: add 5 bytes to max frame size to allow appending
3307 * 32-bit CRC and status byte when configured to do so
3309 static int alloc_tmp_rbuf(struct slgt_info *info)
3311 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3312 if (info->tmp_rbuf == NULL)
3314 /* unused flag buffer to satisfy receive_buf calling interface */
3315 info->flag_buf = kzalloc(info->max_frame_size + 5, GFP_KERNEL);
3316 if (!info->flag_buf) {
3317 kfree(info->tmp_rbuf);
3318 info->tmp_rbuf = NULL;
3324 static void free_tmp_rbuf(struct slgt_info *info)
3326 kfree(info->tmp_rbuf);
3327 info->tmp_rbuf = NULL;
3328 kfree(info->flag_buf);
3329 info->flag_buf = NULL;
3333 * allocate DMA descriptor lists.
3335 static int alloc_desc(struct slgt_info *info)
3340 /* allocate memory to hold descriptor lists */
3341 info->bufs = dma_alloc_coherent(&info->pdev->dev, DESC_LIST_SIZE,
3342 &info->bufs_dma_addr, GFP_KERNEL);
3343 if (info->bufs == NULL)
3346 info->rbufs = (struct slgt_desc*)info->bufs;
3347 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3349 pbufs = (unsigned int)info->bufs_dma_addr;
3352 * Build circular lists of descriptors
3355 for (i=0; i < info->rbuf_count; i++) {
3356 /* physical address of this descriptor */
3357 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3359 /* physical address of next descriptor */
3360 if (i == info->rbuf_count - 1)
3361 info->rbufs[i].next = cpu_to_le32(pbufs);
3363 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3364 set_desc_count(info->rbufs[i], DMABUFSIZE);
3367 for (i=0; i < info->tbuf_count; i++) {
3368 /* physical address of this descriptor */
3369 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3371 /* physical address of next descriptor */
3372 if (i == info->tbuf_count - 1)
3373 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3375 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3381 static void free_desc(struct slgt_info *info)
3383 if (info->bufs != NULL) {
3384 dma_free_coherent(&info->pdev->dev, DESC_LIST_SIZE,
3385 info->bufs, info->bufs_dma_addr);
3392 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3395 for (i=0; i < count; i++) {
3396 bufs[i].buf = dma_alloc_coherent(&info->pdev->dev, DMABUFSIZE,
3397 &bufs[i].buf_dma_addr, GFP_KERNEL);
3400 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3405 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3408 for (i=0; i < count; i++) {
3409 if (bufs[i].buf == NULL)
3411 dma_free_coherent(&info->pdev->dev, DMABUFSIZE, bufs[i].buf,
3412 bufs[i].buf_dma_addr);
3417 static int alloc_dma_bufs(struct slgt_info *info)
3419 info->rbuf_count = 32;
3420 info->tbuf_count = 32;
3422 if (alloc_desc(info) < 0 ||
3423 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3424 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3425 alloc_tmp_rbuf(info) < 0) {
3426 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3433 static void free_dma_bufs(struct slgt_info *info)
3436 free_bufs(info, info->rbufs, info->rbuf_count);
3437 free_bufs(info, info->tbufs, info->tbuf_count);
3440 free_tmp_rbuf(info);
3443 static int claim_resources(struct slgt_info *info)
3445 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3446 DBGERR(("%s reg addr conflict, addr=%08X\n",
3447 info->device_name, info->phys_reg_addr));
3448 info->init_error = DiagStatus_AddressConflict;
3452 info->reg_addr_requested = true;
3454 info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
3455 if (!info->reg_addr) {
3456 DBGERR(("%s can't map device registers, addr=%08X\n",
3457 info->device_name, info->phys_reg_addr));
3458 info->init_error = DiagStatus_CantAssignPciResources;
3464 release_resources(info);
3468 static void release_resources(struct slgt_info *info)
3470 if (info->irq_requested) {
3471 free_irq(info->irq_level, info);
3472 info->irq_requested = false;
3475 if (info->reg_addr_requested) {
3476 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3477 info->reg_addr_requested = false;
3480 if (info->reg_addr) {
3481 iounmap(info->reg_addr);
3482 info->reg_addr = NULL;
3486 /* Add the specified device instance data structure to the
3487 * global linked list of devices and increment the device count.
3489 static void add_device(struct slgt_info *info)
3493 info->next_device = NULL;
3494 info->line = slgt_device_count;
3495 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3497 if (info->line < MAX_DEVICES) {
3498 if (maxframe[info->line])
3499 info->max_frame_size = maxframe[info->line];
3502 slgt_device_count++;
3504 if (!slgt_device_list)
3505 slgt_device_list = info;
3507 struct slgt_info *current_dev = slgt_device_list;
3508 while(current_dev->next_device)
3509 current_dev = current_dev->next_device;
3510 current_dev->next_device = info;
3513 if (info->max_frame_size < 4096)
3514 info->max_frame_size = 4096;
3515 else if (info->max_frame_size > 65535)
3516 info->max_frame_size = 65535;
3518 switch(info->pdev->device) {
3519 case SYNCLINK_GT_DEVICE_ID:
3522 case SYNCLINK_GT2_DEVICE_ID:
3525 case SYNCLINK_GT4_DEVICE_ID:
3528 case SYNCLINK_AC_DEVICE_ID:
3530 info->params.mode = MGSL_MODE_ASYNC;
3533 devstr = "(unknown model)";
3535 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3536 devstr, info->device_name, info->phys_reg_addr,
3537 info->irq_level, info->max_frame_size);
3539 #if SYNCLINK_GENERIC_HDLC
3544 static const struct tty_port_operations slgt_port_ops = {
3545 .carrier_raised = carrier_raised,
3550 * allocate device instance structure, return NULL on failure
3552 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3554 struct slgt_info *info;
3556 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3559 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3560 driver_name, adapter_num, port_num));
3562 tty_port_init(&info->port);
3563 info->port.ops = &slgt_port_ops;
3564 info->magic = MGSL_MAGIC;
3565 INIT_WORK(&info->task, bh_handler);
3566 info->max_frame_size = 4096;
3567 info->base_clock = 14745600;
3568 info->rbuf_fill_level = DMABUFSIZE;
3569 info->port.close_delay = 5*HZ/10;
3570 info->port.closing_wait = 30*HZ;
3571 init_waitqueue_head(&info->status_event_wait_q);
3572 init_waitqueue_head(&info->event_wait_q);
3573 spin_lock_init(&info->netlock);
3574 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3575 info->idle_mode = HDLC_TXIDLE_FLAGS;
3576 info->adapter_num = adapter_num;
3577 info->port_num = port_num;
3579 timer_setup(&info->tx_timer, tx_timeout, 0);
3580 timer_setup(&info->rx_timer, rx_timeout, 0);
3582 /* Copy configuration info to device instance data */
3584 info->irq_level = pdev->irq;
3585 info->phys_reg_addr = pci_resource_start(pdev,0);
3587 info->bus_type = MGSL_BUS_TYPE_PCI;
3588 info->irq_flags = IRQF_SHARED;
3590 info->init_error = -1; /* assume error, set to 0 on successful init */
3596 static void device_init(int adapter_num, struct pci_dev *pdev)
3598 struct slgt_info *port_array[SLGT_MAX_PORTS];
3602 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3604 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3607 /* allocate device instances for all ports */
3608 for (i=0; i < port_count; ++i) {
3609 port_array[i] = alloc_dev(adapter_num, i, pdev);
3610 if (port_array[i] == NULL) {
3611 for (--i; i >= 0; --i) {
3612 tty_port_destroy(&port_array[i]->port);
3613 kfree(port_array[i]);
3619 /* give copy of port_array to all ports and add to device list */
3620 for (i=0; i < port_count; ++i) {
3621 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3622 add_device(port_array[i]);
3623 port_array[i]->port_count = port_count;
3624 spin_lock_init(&port_array[i]->lock);
3627 /* Allocate and claim adapter resources */
3628 if (!claim_resources(port_array[0])) {
3630 alloc_dma_bufs(port_array[0]);
3632 /* copy resource information from first port to others */
3633 for (i = 1; i < port_count; ++i) {
3634 port_array[i]->irq_level = port_array[0]->irq_level;
3635 port_array[i]->reg_addr = port_array[0]->reg_addr;
3636 alloc_dma_bufs(port_array[i]);
3639 if (request_irq(port_array[0]->irq_level,
3641 port_array[0]->irq_flags,
3642 port_array[0]->device_name,
3643 port_array[0]) < 0) {
3644 DBGERR(("%s request_irq failed IRQ=%d\n",
3645 port_array[0]->device_name,
3646 port_array[0]->irq_level));
3648 port_array[0]->irq_requested = true;
3649 adapter_test(port_array[0]);
3650 for (i=1 ; i < port_count ; i++) {
3651 port_array[i]->init_error = port_array[0]->init_error;
3652 port_array[i]->gpio_present = port_array[0]->gpio_present;
3657 for (i = 0; i < port_count; ++i) {
3658 struct slgt_info *info = port_array[i];
3659 tty_port_register_device(&info->port, serial_driver, info->line,
3664 static int init_one(struct pci_dev *dev,
3665 const struct pci_device_id *ent)
3667 if (pci_enable_device(dev)) {
3668 printk("error enabling pci device %p\n", dev);
3671 pci_set_master(dev);
3672 device_init(slgt_device_count, dev);
3676 static void remove_one(struct pci_dev *dev)
3680 static const struct tty_operations ops = {
3684 .put_char = put_char,
3685 .flush_chars = flush_chars,
3686 .write_room = write_room,
3687 .chars_in_buffer = chars_in_buffer,
3688 .flush_buffer = flush_buffer,
3690 .compat_ioctl = slgt_compat_ioctl,
3691 .throttle = throttle,
3692 .unthrottle = unthrottle,
3693 .send_xchar = send_xchar,
3694 .break_ctl = set_break,
3695 .wait_until_sent = wait_until_sent,
3696 .set_termios = set_termios,
3698 .start = tx_release,
3700 .tiocmget = tiocmget,
3701 .tiocmset = tiocmset,
3702 .get_icount = get_icount,
3703 .proc_show = synclink_gt_proc_show,
3706 static void slgt_cleanup(void)
3709 struct slgt_info *info;
3710 struct slgt_info *tmp;
3712 printk(KERN_INFO "unload %s\n", driver_name);
3714 if (serial_driver) {
3715 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3716 tty_unregister_device(serial_driver, info->line);
3717 rc = tty_unregister_driver(serial_driver);
3719 DBGERR(("tty_unregister_driver error=%d\n", rc));
3720 put_tty_driver(serial_driver);
3724 info = slgt_device_list;
3727 info = info->next_device;
3730 /* release devices */
3731 info = slgt_device_list;
3733 #if SYNCLINK_GENERIC_HDLC
3736 free_dma_bufs(info);
3737 free_tmp_rbuf(info);
3738 if (info->port_num == 0)
3739 release_resources(info);
3741 info = info->next_device;
3742 tty_port_destroy(&tmp->port);
3747 pci_unregister_driver(&pci_driver);
3751 * Driver initialization entry point.
3753 static int __init slgt_init(void)
3757 printk(KERN_INFO "%s\n", driver_name);
3759 serial_driver = alloc_tty_driver(MAX_DEVICES);
3760 if (!serial_driver) {
3761 printk("%s can't allocate tty driver\n", driver_name);
3765 /* Initialize the tty_driver structure */
3767 serial_driver->driver_name = slgt_driver_name;
3768 serial_driver->name = tty_dev_prefix;
3769 serial_driver->major = ttymajor;
3770 serial_driver->minor_start = 64;
3771 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3772 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3773 serial_driver->init_termios = tty_std_termios;
3774 serial_driver->init_termios.c_cflag =
3775 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3776 serial_driver->init_termios.c_ispeed = 9600;
3777 serial_driver->init_termios.c_ospeed = 9600;
3778 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3779 tty_set_operations(serial_driver, &ops);
3780 if ((rc = tty_register_driver(serial_driver)) < 0) {
3781 DBGERR(("%s can't register serial driver\n", driver_name));
3782 put_tty_driver(serial_driver);
3783 serial_driver = NULL;
3787 printk(KERN_INFO "%s, tty major#%d\n",
3788 driver_name, serial_driver->major);
3790 slgt_device_count = 0;
3791 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3792 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3795 pci_registered = true;
3797 if (!slgt_device_list)
3798 printk("%s no devices found\n",driver_name);
3807 static void __exit slgt_exit(void)
3812 module_init(slgt_init);
3813 module_exit(slgt_exit);
3816 * register access routines
3819 #define CALC_REGADDR() \
3820 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3822 reg_addr += (info->port_num) * 32; \
3823 else if (addr >= 0x40) \
3824 reg_addr += (info->port_num) * 16;
3826 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3829 return readb((void __iomem *)reg_addr);
3832 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3835 writeb(value, (void __iomem *)reg_addr);
3838 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3841 return readw((void __iomem *)reg_addr);
3844 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3847 writew(value, (void __iomem *)reg_addr);
3850 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3853 return readl((void __iomem *)reg_addr);
3856 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3859 writel(value, (void __iomem *)reg_addr);
3862 static void rdma_reset(struct slgt_info *info)
3867 wr_reg32(info, RDCSR, BIT1);
3869 /* wait for enable bit cleared */
3870 for(i=0 ; i < 1000 ; i++)
3871 if (!(rd_reg32(info, RDCSR) & BIT0))
3875 static void tdma_reset(struct slgt_info *info)
3880 wr_reg32(info, TDCSR, BIT1);
3882 /* wait for enable bit cleared */
3883 for(i=0 ; i < 1000 ; i++)
3884 if (!(rd_reg32(info, TDCSR) & BIT0))
3889 * enable internal loopback
3890 * TxCLK and RxCLK are generated from BRG
3891 * and TxD is looped back to RxD internally.
3893 static void enable_loopback(struct slgt_info *info)
3895 /* SCR (serial control) BIT2=loopback enable */
3896 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3898 if (info->params.mode != MGSL_MODE_ASYNC) {
3899 /* CCR (clock control)
3900 * 07..05 tx clock source (010 = BRG)
3901 * 04..02 rx clock source (010 = BRG)
3902 * 01 auxclk enable (0 = disable)
3903 * 00 BRG enable (1 = enable)
3907 wr_reg8(info, CCR, 0x49);
3909 /* set speed if available, otherwise use default */
3910 if (info->params.clock_speed)
3911 set_rate(info, info->params.clock_speed);
3913 set_rate(info, 3686400);
3918 * set baud rate generator to specified rate
3920 static void set_rate(struct slgt_info *info, u32 rate)
3923 unsigned int osc = info->base_clock;
3925 /* div = osc/rate - 1
3927 * Round div up if osc/rate is not integer to
3928 * force to next slowest rate.
3933 if (!(osc % rate) && div)
3935 wr_reg16(info, BDR, (unsigned short)div);
3939 static void rx_stop(struct slgt_info *info)
3943 /* disable and reset receiver */
3944 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3945 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3946 wr_reg16(info, RCR, val); /* clear reset bit */
3948 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3950 /* clear pending rx interrupts */
3951 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3955 info->rx_enabled = false;
3956 info->rx_restart = false;
3959 static void rx_start(struct slgt_info *info)
3963 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3965 /* clear pending rx overrun IRQ */
3966 wr_reg16(info, SSR, IRQ_RXOVER);
3968 /* reset and disable receiver */
3969 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3970 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3971 wr_reg16(info, RCR, val); /* clear reset bit */
3977 /* rx request when rx FIFO not empty */
3978 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
3979 slgt_irq_on(info, IRQ_RXDATA);
3980 if (info->params.mode == MGSL_MODE_ASYNC) {
3981 /* enable saving of rx status */
3982 wr_reg32(info, RDCSR, BIT6);
3985 /* rx request when rx FIFO half full */
3986 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
3987 /* set 1st descriptor address */
3988 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3990 if (info->params.mode != MGSL_MODE_ASYNC) {
3991 /* enable rx DMA and DMA interrupt */
3992 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3994 /* enable saving of rx status, rx DMA and DMA interrupt */
3995 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3999 slgt_irq_on(info, IRQ_RXOVER);
4001 /* enable receiver */
4002 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
4004 info->rx_restart = false;
4005 info->rx_enabled = true;
4008 static void tx_start(struct slgt_info *info)
4010 if (!info->tx_enabled) {
4012 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
4013 info->tx_enabled = true;
4016 if (desc_count(info->tbufs[info->tbuf_start])) {
4017 info->drop_rts_on_tx_done = false;
4019 if (info->params.mode != MGSL_MODE_ASYNC) {
4020 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
4022 if (!(info->signals & SerialSignal_RTS)) {
4023 info->signals |= SerialSignal_RTS;
4025 info->drop_rts_on_tx_done = true;
4029 slgt_irq_off(info, IRQ_TXDATA);
4030 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
4031 /* clear tx idle and underrun status bits */
4032 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4034 slgt_irq_off(info, IRQ_TXDATA);
4035 slgt_irq_on(info, IRQ_TXIDLE);
4036 /* clear tx idle status bit */
4037 wr_reg16(info, SSR, IRQ_TXIDLE);
4039 /* set 1st descriptor address and start DMA */
4040 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
4041 wr_reg32(info, TDCSR, BIT2 + BIT0);
4042 info->tx_active = true;
4046 static void tx_stop(struct slgt_info *info)
4050 del_timer(&info->tx_timer);
4054 /* reset and disable transmitter */
4055 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
4056 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
4058 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
4060 /* clear tx idle and underrun status bit */
4061 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4065 info->tx_enabled = false;
4066 info->tx_active = false;
4069 static void reset_port(struct slgt_info *info)
4071 if (!info->reg_addr)
4077 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
4080 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4083 static void reset_adapter(struct slgt_info *info)
4086 for (i=0; i < info->port_count; ++i) {
4087 if (info->port_array[i])
4088 reset_port(info->port_array[i]);
4092 static void async_mode(struct slgt_info *info)
4096 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4102 * 15..13 mode, 010=async
4103 * 12..10 encoding, 000=NRZ
4105 * 08 1=odd parity, 0=even parity
4106 * 07 1=RTS driver control
4108 * 05..04 character length
4113 * 03 0=1 stop bit, 1=2 stop bits
4116 * 00 auto-CTS enable
4120 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4123 if (info->params.parity != ASYNC_PARITY_NONE) {
4125 if (info->params.parity == ASYNC_PARITY_ODD)
4129 switch (info->params.data_bits)
4131 case 6: val |= BIT4; break;
4132 case 7: val |= BIT5; break;
4133 case 8: val |= BIT5 + BIT4; break;
4136 if (info->params.stop_bits != 1)
4139 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4142 wr_reg16(info, TCR, val);
4146 * 15..13 mode, 010=async
4147 * 12..10 encoding, 000=NRZ
4149 * 08 1=odd parity, 0=even parity
4150 * 07..06 reserved, must be 0
4151 * 05..04 character length
4156 * 03 reserved, must be zero
4159 * 00 auto-DCD enable
4163 if (info->params.parity != ASYNC_PARITY_NONE) {
4165 if (info->params.parity == ASYNC_PARITY_ODD)
4169 switch (info->params.data_bits)
4171 case 6: val |= BIT4; break;
4172 case 7: val |= BIT5; break;
4173 case 8: val |= BIT5 + BIT4; break;
4176 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4179 wr_reg16(info, RCR, val);
4181 /* CCR (clock control)
4183 * 07..05 011 = tx clock source is BRG/16
4184 * 04..02 010 = rx clock source is BRG
4185 * 01 0 = auxclk disabled
4186 * 00 1 = BRG enabled
4190 wr_reg8(info, CCR, 0x69);
4194 /* SCR (serial control)
4196 * 15 1=tx req on FIFO half empty
4197 * 14 1=rx req on FIFO half full
4198 * 13 tx data IRQ enable
4199 * 12 tx idle IRQ enable
4200 * 11 rx break on IRQ enable
4201 * 10 rx data IRQ enable
4202 * 09 rx break off IRQ enable
4203 * 08 overrun IRQ enable
4208 * 03 0=16x sampling, 1=8x sampling
4209 * 02 1=txd->rxd internal loopback enable
4210 * 01 reserved, must be zero
4211 * 00 1=master IRQ enable
4213 val = BIT15 + BIT14 + BIT0;
4214 /* JCR[8] : 1 = x8 async mode feature available */
4215 if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
4216 ((info->base_clock < (info->params.data_rate * 16)) ||
4217 (info->base_clock % (info->params.data_rate * 16)))) {
4218 /* use 8x sampling */
4220 set_rate(info, info->params.data_rate * 8);
4222 /* use 16x sampling */
4223 set_rate(info, info->params.data_rate * 16);
4225 wr_reg16(info, SCR, val);
4227 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4229 if (info->params.loopback)
4230 enable_loopback(info);
4233 static void sync_mode(struct slgt_info *info)
4237 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4245 * 001=raw bit synchronous
4246 * 010=asynchronous/isochronous
4247 * 011=monosync byte synchronous
4248 * 100=bisync byte synchronous
4249 * 101=xsync byte synchronous
4253 * 07 1=RTS driver control
4254 * 06 preamble enable
4255 * 05..04 preamble length
4256 * 03 share open/close flag
4259 * 00 auto-CTS enable
4263 switch(info->params.mode) {
4264 case MGSL_MODE_XSYNC:
4265 val |= BIT15 + BIT13;
4267 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4268 case MGSL_MODE_BISYNC: val |= BIT15; break;
4269 case MGSL_MODE_RAW: val |= BIT13; break;
4271 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4274 switch(info->params.encoding)
4276 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4277 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4278 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4279 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4280 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4281 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4282 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4285 switch (info->params.crc_type & HDLC_CRC_MASK)
4287 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4288 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4291 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4294 switch (info->params.preamble_length)
4296 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4297 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4298 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4301 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4304 wr_reg16(info, TCR, val);
4306 /* TPR (transmit preamble) */
4308 switch (info->params.preamble)
4310 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4311 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4312 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4313 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4314 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4315 default: val = 0x7e; break;
4317 wr_reg8(info, TPR, (unsigned char)val);
4323 * 001=raw bit synchronous
4324 * 010=asynchronous/isochronous
4325 * 011=monosync byte synchronous
4326 * 100=bisync byte synchronous
4327 * 101=xsync byte synchronous
4331 * 07..03 reserved, must be 0
4334 * 00 auto-DCD enable
4338 switch(info->params.mode) {
4339 case MGSL_MODE_XSYNC:
4340 val |= BIT15 + BIT13;
4342 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4343 case MGSL_MODE_BISYNC: val |= BIT15; break;
4344 case MGSL_MODE_RAW: val |= BIT13; break;
4347 switch(info->params.encoding)
4349 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4350 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4351 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4352 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4353 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4354 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4355 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4358 switch (info->params.crc_type & HDLC_CRC_MASK)
4360 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4361 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4364 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4367 wr_reg16(info, RCR, val);
4369 /* CCR (clock control)
4371 * 07..05 tx clock source
4372 * 04..02 rx clock source
4378 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4380 // when RxC source is DPLL, BRG generates 16X DPLL
4381 // reference clock, so take TxC from BRG/16 to get
4382 // transmit clock at actual data rate
4383 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4384 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4386 val |= BIT6; /* 010, txclk = BRG */
4388 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4389 val |= BIT7; /* 100, txclk = DPLL Input */
4390 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4391 val |= BIT5; /* 001, txclk = RXC Input */
4393 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4394 val |= BIT3; /* 010, rxclk = BRG */
4395 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4396 val |= BIT4; /* 100, rxclk = DPLL */
4397 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4398 val |= BIT2; /* 001, rxclk = TXC Input */
4400 if (info->params.clock_speed)
4403 wr_reg8(info, CCR, (unsigned char)val);
4405 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4407 // program DPLL mode
4408 switch(info->params.encoding)
4410 case HDLC_ENCODING_BIPHASE_MARK:
4411 case HDLC_ENCODING_BIPHASE_SPACE:
4413 case HDLC_ENCODING_BIPHASE_LEVEL:
4414 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4415 val = BIT7 + BIT6; break;
4416 default: val = BIT6; // NRZ encodings
4418 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4420 // DPLL requires a 16X reference clock from BRG
4421 set_rate(info, info->params.clock_speed * 16);
4424 set_rate(info, info->params.clock_speed);
4430 /* SCR (serial control)
4432 * 15 1=tx req on FIFO half empty
4433 * 14 1=rx req on FIFO half full
4434 * 13 tx data IRQ enable
4435 * 12 tx idle IRQ enable
4436 * 11 underrun IRQ enable
4437 * 10 rx data IRQ enable
4438 * 09 rx idle IRQ enable
4439 * 08 overrun IRQ enable
4444 * 03 reserved, must be zero
4445 * 02 1=txd->rxd internal loopback enable
4446 * 01 reserved, must be zero
4447 * 00 1=master IRQ enable
4449 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4451 if (info->params.loopback)
4452 enable_loopback(info);
4456 * set transmit idle mode
4458 static void tx_set_idle(struct slgt_info *info)
4463 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4464 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4466 tcr = rd_reg16(info, TCR);
4467 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4468 /* disable preamble, set idle size to 16 bits */
4469 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4470 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4471 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4472 } else if (!(tcr & BIT6)) {
4473 /* preamble is disabled, set idle size to 8 bits */
4474 tcr &= ~(BIT5 + BIT4);
4476 wr_reg16(info, TCR, tcr);
4478 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4479 /* LSB of custom tx idle specified in tx idle register */
4480 val = (unsigned char)(info->idle_mode & 0xff);
4482 /* standard 8 bit idle patterns */
4483 switch(info->idle_mode)
4485 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4486 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4487 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4488 case HDLC_TXIDLE_ZEROS:
4489 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4490 default: val = 0xff;
4494 wr_reg8(info, TIR, val);
4498 * get state of V24 status (input) signals
4500 static void get_signals(struct slgt_info *info)
4502 unsigned short status = rd_reg16(info, SSR);
4504 /* clear all serial signals except RTS and DTR */
4505 info->signals &= SerialSignal_RTS | SerialSignal_DTR;
4508 info->signals |= SerialSignal_DSR;
4510 info->signals |= SerialSignal_CTS;
4512 info->signals |= SerialSignal_DCD;
4514 info->signals |= SerialSignal_RI;
4518 * set V.24 Control Register based on current configuration
4520 static void msc_set_vcr(struct slgt_info *info)
4522 unsigned char val = 0;
4524 /* VCR (V.24 control)
4526 * 07..04 serial IF select
4533 switch(info->if_mode & MGSL_INTERFACE_MASK)
4535 case MGSL_INTERFACE_RS232:
4536 val |= BIT5; /* 0010 */
4538 case MGSL_INTERFACE_V35:
4539 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4541 case MGSL_INTERFACE_RS422:
4542 val |= BIT6; /* 0100 */
4546 if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4548 if (info->signals & SerialSignal_DTR)
4550 if (info->signals & SerialSignal_RTS)
4552 if (info->if_mode & MGSL_INTERFACE_LL)
4554 if (info->if_mode & MGSL_INTERFACE_RL)
4556 wr_reg8(info, VCR, val);
4560 * set state of V24 control (output) signals
4562 static void set_signals(struct slgt_info *info)
4564 unsigned char val = rd_reg8(info, VCR);
4565 if (info->signals & SerialSignal_DTR)
4569 if (info->signals & SerialSignal_RTS)
4573 wr_reg8(info, VCR, val);
4577 * free range of receive DMA buffers (i to last)
4579 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4584 /* reset current buffer for reuse */
4585 info->rbufs[i].status = 0;
4586 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4589 if (++i == info->rbuf_count)
4592 info->rbuf_current = i;
4596 * mark all receive DMA buffers as free
4598 static void reset_rbufs(struct slgt_info *info)
4600 free_rbufs(info, 0, info->rbuf_count - 1);
4601 info->rbuf_fill_index = 0;
4602 info->rbuf_fill_count = 0;
4606 * pass receive HDLC frame to upper layer
4608 * return true if frame available, otherwise false
4610 static bool rx_get_frame(struct slgt_info *info)
4612 unsigned int start, end;
4613 unsigned short status;
4614 unsigned int framesize = 0;
4615 unsigned long flags;
4616 struct tty_struct *tty = info->port.tty;
4617 unsigned char addr_field = 0xff;
4618 unsigned int crc_size = 0;
4620 switch (info->params.crc_type & HDLC_CRC_MASK) {
4621 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4622 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4629 start = end = info->rbuf_current;
4632 if (!desc_complete(info->rbufs[end]))
4635 if (framesize == 0 && info->params.addr_filter != 0xff)
4636 addr_field = info->rbufs[end].buf[0];
4638 framesize += desc_count(info->rbufs[end]);
4640 if (desc_eof(info->rbufs[end]))
4643 if (++end == info->rbuf_count)
4646 if (end == info->rbuf_current) {
4647 if (info->rx_enabled){
4648 spin_lock_irqsave(&info->lock,flags);
4650 spin_unlock_irqrestore(&info->lock,flags);
4658 * 15 buffer complete
4661 * 02 eof (end of frame)
4665 status = desc_status(info->rbufs[end]);
4667 /* ignore CRC bit if not using CRC (bit is undefined) */
4668 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4671 if (framesize == 0 ||
4672 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4673 free_rbufs(info, start, end);
4677 if (framesize < (2 + crc_size) || status & BIT0) {
4678 info->icount.rxshort++;
4680 } else if (status & BIT1) {
4681 info->icount.rxcrc++;
4682 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4686 #if SYNCLINK_GENERIC_HDLC
4687 if (framesize == 0) {
4688 info->netdev->stats.rx_errors++;
4689 info->netdev->stats.rx_frame_errors++;
4693 DBGBH(("%s rx frame status=%04X size=%d\n",
4694 info->device_name, status, framesize));
4695 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4698 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4699 framesize -= crc_size;
4703 if (framesize > info->max_frame_size + crc_size)
4704 info->icount.rxlong++;
4706 /* copy dma buffer(s) to contiguous temp buffer */
4707 int copy_count = framesize;
4709 unsigned char *p = info->tmp_rbuf;
4710 info->tmp_rbuf_count = framesize;
4712 info->icount.rxok++;
4715 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4716 memcpy(p, info->rbufs[i].buf, partial_count);
4718 copy_count -= partial_count;
4719 if (++i == info->rbuf_count)
4723 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4724 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4728 #if SYNCLINK_GENERIC_HDLC
4730 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4733 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4736 free_rbufs(info, start, end);
4744 * pass receive buffer (RAW synchronous mode) to tty layer
4745 * return true if buffer available, otherwise false
4747 static bool rx_get_buf(struct slgt_info *info)
4749 unsigned int i = info->rbuf_current;
4752 if (!desc_complete(info->rbufs[i]))
4754 count = desc_count(info->rbufs[i]);
4755 switch(info->params.mode) {
4756 case MGSL_MODE_MONOSYNC:
4757 case MGSL_MODE_BISYNC:
4758 case MGSL_MODE_XSYNC:
4759 /* ignore residue in byte synchronous modes */
4760 if (desc_residue(info->rbufs[i]))
4764 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4765 DBGINFO(("rx_get_buf size=%d\n", count));
4767 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4768 info->flag_buf, count);
4769 free_rbufs(info, i, i);
4773 static void reset_tbufs(struct slgt_info *info)
4776 info->tbuf_current = 0;
4777 for (i=0 ; i < info->tbuf_count ; i++) {
4778 info->tbufs[i].status = 0;
4779 info->tbufs[i].count = 0;
4784 * return number of free transmit DMA buffers
4786 static unsigned int free_tbuf_count(struct slgt_info *info)
4788 unsigned int count = 0;
4789 unsigned int i = info->tbuf_current;
4793 if (desc_count(info->tbufs[i]))
4794 break; /* buffer in use */
4796 if (++i == info->tbuf_count)
4798 } while (i != info->tbuf_current);
4800 /* if tx DMA active, last zero count buffer is in use */
4801 if (count && (rd_reg32(info, TDCSR) & BIT0))
4808 * return number of bytes in unsent transmit DMA buffers
4809 * and the serial controller tx FIFO
4811 static unsigned int tbuf_bytes(struct slgt_info *info)
4813 unsigned int total_count = 0;
4814 unsigned int i = info->tbuf_current;
4815 unsigned int reg_value;
4817 unsigned int active_buf_count = 0;
4820 * Add descriptor counts for all tx DMA buffers.
4821 * If count is zero (cleared by DMA controller after read),
4822 * the buffer is complete or is actively being read from.
4824 * Record buf_count of last buffer with zero count starting
4825 * from current ring position. buf_count is mirror
4826 * copy of count and is not cleared by serial controller.
4827 * If DMA controller is active, that buffer is actively
4828 * being read so add to total.
4831 count = desc_count(info->tbufs[i]);
4833 total_count += count;
4834 else if (!total_count)
4835 active_buf_count = info->tbufs[i].buf_count;
4836 if (++i == info->tbuf_count)
4838 } while (i != info->tbuf_current);
4840 /* read tx DMA status register */
4841 reg_value = rd_reg32(info, TDCSR);
4843 /* if tx DMA active, last zero count buffer is in use */
4844 if (reg_value & BIT0)
4845 total_count += active_buf_count;
4847 /* add tx FIFO count = reg_value[15..8] */
4848 total_count += (reg_value >> 8) & 0xff;
4850 /* if transmitter active add one byte for shift register */
4851 if (info->tx_active)
4858 * load data into transmit DMA buffer ring and start transmitter if needed
4859 * return true if data accepted, otherwise false (buffers full)
4861 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4863 unsigned short count;
4865 struct slgt_desc *d;
4867 /* check required buffer space */
4868 if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
4871 DBGDATA(info, buf, size, "tx");
4874 * copy data to one or more DMA buffers in circular ring
4875 * tbuf_start = first buffer for this data
4876 * tbuf_current = next free buffer
4878 * Copy all data before making data visible to DMA controller by
4879 * setting descriptor count of the first buffer.
4880 * This prevents an active DMA controller from reading the first DMA
4881 * buffers of a frame and stopping before the final buffers are filled.
4884 info->tbuf_start = i = info->tbuf_current;
4887 d = &info->tbufs[i];
4889 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4890 memcpy(d->buf, buf, count);
4896 * set EOF bit for last buffer of HDLC frame or
4897 * for every buffer in raw mode
4899 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4900 info->params.mode == MGSL_MODE_RAW)
4901 set_desc_eof(*d, 1);
4903 set_desc_eof(*d, 0);
4905 /* set descriptor count for all but first buffer */
4906 if (i != info->tbuf_start)
4907 set_desc_count(*d, count);
4908 d->buf_count = count;
4910 if (++i == info->tbuf_count)
4914 info->tbuf_current = i;
4916 /* set first buffer count to make new data visible to DMA controller */
4917 d = &info->tbufs[info->tbuf_start];
4918 set_desc_count(*d, d->buf_count);
4920 /* start transmitter if needed and update transmit timeout */
4921 if (!info->tx_active)
4923 update_tx_timer(info);
4928 static int register_test(struct slgt_info *info)
4930 static unsigned short patterns[] =
4931 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4932 static unsigned int count = ARRAY_SIZE(patterns);
4936 for (i=0 ; i < count ; i++) {
4937 wr_reg16(info, TIR, patterns[i]);
4938 wr_reg16(info, BDR, patterns[(i+1)%count]);
4939 if ((rd_reg16(info, TIR) != patterns[i]) ||
4940 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4945 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4946 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4950 static int irq_test(struct slgt_info *info)
4952 unsigned long timeout;
4953 unsigned long flags;
4954 struct tty_struct *oldtty = info->port.tty;
4955 u32 speed = info->params.data_rate;
4957 info->params.data_rate = 921600;
4958 info->port.tty = NULL;
4960 spin_lock_irqsave(&info->lock, flags);
4962 slgt_irq_on(info, IRQ_TXIDLE);
4964 /* enable transmitter */
4966 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4968 /* write one byte and wait for tx idle */
4969 wr_reg16(info, TDR, 0);
4971 /* assume failure */
4972 info->init_error = DiagStatus_IrqFailure;
4973 info->irq_occurred = false;
4975 spin_unlock_irqrestore(&info->lock, flags);
4978 while(timeout-- && !info->irq_occurred)
4979 msleep_interruptible(10);
4981 spin_lock_irqsave(&info->lock,flags);
4983 spin_unlock_irqrestore(&info->lock,flags);
4985 info->params.data_rate = speed;
4986 info->port.tty = oldtty;
4988 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4989 return info->irq_occurred ? 0 : -ENODEV;
4992 static int loopback_test_rx(struct slgt_info *info)
4994 unsigned char *src, *dest;
4997 if (desc_complete(info->rbufs[0])) {
4998 count = desc_count(info->rbufs[0]);
4999 src = info->rbufs[0].buf;
5000 dest = info->tmp_rbuf;
5002 for( ; count ; count-=2, src+=2) {
5003 /* src=data byte (src+1)=status byte */
5004 if (!(*(src+1) & (BIT9 + BIT8))) {
5007 info->tmp_rbuf_count++;
5010 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
5016 static int loopback_test(struct slgt_info *info)
5018 #define TESTFRAMESIZE 20
5020 unsigned long timeout;
5021 u16 count = TESTFRAMESIZE;
5022 unsigned char buf[TESTFRAMESIZE];
5024 unsigned long flags;
5026 struct tty_struct *oldtty = info->port.tty;
5029 memcpy(¶ms, &info->params, sizeof(params));
5031 info->params.mode = MGSL_MODE_ASYNC;
5032 info->params.data_rate = 921600;
5033 info->params.loopback = 1;
5034 info->port.tty = NULL;
5036 /* build and send transmit frame */
5037 for (count = 0; count < TESTFRAMESIZE; ++count)
5038 buf[count] = (unsigned char)count;
5040 info->tmp_rbuf_count = 0;
5041 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
5043 /* program hardware for HDLC and enabled receiver */
5044 spin_lock_irqsave(&info->lock,flags);
5047 tx_load(info, buf, count);
5048 spin_unlock_irqrestore(&info->lock, flags);
5050 /* wait for receive complete */
5051 for (timeout = 100; timeout; --timeout) {
5052 msleep_interruptible(10);
5053 if (loopback_test_rx(info)) {
5059 /* verify received frame length and contents */
5060 if (!rc && (info->tmp_rbuf_count != count ||
5061 memcmp(buf, info->tmp_rbuf, count))) {
5065 spin_lock_irqsave(&info->lock,flags);
5066 reset_adapter(info);
5067 spin_unlock_irqrestore(&info->lock,flags);
5069 memcpy(&info->params, ¶ms, sizeof(info->params));
5070 info->port.tty = oldtty;
5072 info->init_error = rc ? DiagStatus_DmaFailure : 0;
5076 static int adapter_test(struct slgt_info *info)
5078 DBGINFO(("testing %s\n", info->device_name));
5079 if (register_test(info) < 0) {
5080 printk("register test failure %s addr=%08X\n",
5081 info->device_name, info->phys_reg_addr);
5082 } else if (irq_test(info) < 0) {
5083 printk("IRQ test failure %s IRQ=%d\n",
5084 info->device_name, info->irq_level);
5085 } else if (loopback_test(info) < 0) {
5086 printk("loopback test failure %s\n", info->device_name);
5088 return info->init_error;
5092 * transmit timeout handler
5094 static void tx_timeout(struct timer_list *t)
5096 struct slgt_info *info = from_timer(info, t, tx_timer);
5097 unsigned long flags;
5099 DBGINFO(("%s tx_timeout\n", info->device_name));
5100 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5101 info->icount.txtimeout++;
5103 spin_lock_irqsave(&info->lock,flags);
5105 spin_unlock_irqrestore(&info->lock,flags);
5107 #if SYNCLINK_GENERIC_HDLC
5109 hdlcdev_tx_done(info);
5116 * receive buffer polling timer
5118 static void rx_timeout(struct timer_list *t)
5120 struct slgt_info *info = from_timer(info, t, rx_timer);
5121 unsigned long flags;
5123 DBGINFO(("%s rx_timeout\n", info->device_name));
5124 spin_lock_irqsave(&info->lock, flags);
5125 info->pending_bh |= BH_RECEIVE;
5126 spin_unlock_irqrestore(&info->lock, flags);
5127 bh_handler(&info->task);