drivers/tty/serial/msm_serial.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Driver for msm7k serial device and console
   4  *
   5  * Copyright (C) 2007 Google, Inc.
   6  * Author: Robert Love <rlove@google.com>
   7  * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/atomic.h>
  12 #include <linux/dma-mapping.h>
  13 #include <linux/dmaengine.h>
  14 #include <linux/module.h>
  15 #include <linux/io.h>
  16 #include <linux/ioport.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/init.h>
  19 #include <linux/console.h>
  20 #include <linux/tty.h>
  21 #include <linux/tty_flip.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/slab.h>
  24 #include <linux/clk.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/delay.h>
  27 #include <linux/of.h>
  28 #include <linux/of_device.h>
  29 #include <linux/wait.h>
  30
  31 #define UART_MR1                        0x0000
  32
  33 #define UART_MR1_AUTO_RFR_LEVEL0        0x3F
  34 #define UART_MR1_AUTO_RFR_LEVEL1        0x3FF00
  35 #define UART_DM_MR1_AUTO_RFR_LEVEL1     0xFFFFFF00
  36 #define UART_MR1_RX_RDY_CTL             BIT(7)
  37 #define UART_MR1_CTS_CTL                BIT(6)
  38
  39 #define UART_MR2                        0x0004
  40 #define UART_MR2_ERROR_MODE             BIT(6)
  41 #define UART_MR2_BITS_PER_CHAR          0x30
  42 #define UART_MR2_BITS_PER_CHAR_5        (0x0 << 4)
  43 #define UART_MR2_BITS_PER_CHAR_6        (0x1 << 4)
  44 #define UART_MR2_BITS_PER_CHAR_7        (0x2 << 4)
  45 #define UART_MR2_BITS_PER_CHAR_8        (0x3 << 4)
  46 #define UART_MR2_STOP_BIT_LEN_ONE       (0x1 << 2)
  47 #define UART_MR2_STOP_BIT_LEN_TWO       (0x3 << 2)
  48 #define UART_MR2_PARITY_MODE_NONE       0x0
  49 #define UART_MR2_PARITY_MODE_ODD        0x1
  50 #define UART_MR2_PARITY_MODE_EVEN       0x2
  51 #define UART_MR2_PARITY_MODE_SPACE      0x3
  52 #define UART_MR2_PARITY_MODE            0x3
  53
  54 #define UART_CSR                        0x0008
  55
  56 #define UART_TF                         0x000C
  57 #define UARTDM_TF                       0x0070
  58
  59 #define UART_CR                         0x0010
  60 #define UART_CR_CMD_NULL                (0 << 4)
  61 #define UART_CR_CMD_RESET_RX            (1 << 4)
  62 #define UART_CR_CMD_RESET_TX            (2 << 4)
  63 #define UART_CR_CMD_RESET_ERR           (3 << 4)
  64 #define UART_CR_CMD_RESET_BREAK_INT     (4 << 4)
  65 #define UART_CR_CMD_START_BREAK         (5 << 4)
  66 #define UART_CR_CMD_STOP_BREAK          (6 << 4)
  67 #define UART_CR_CMD_RESET_CTS           (7 << 4)
  68 #define UART_CR_CMD_RESET_STALE_INT     (8 << 4)
  69 #define UART_CR_CMD_PACKET_MODE         (9 << 4)
  70 #define UART_CR_CMD_MODE_RESET          (12 << 4)
  71 #define UART_CR_CMD_SET_RFR             (13 << 4)
  72 #define UART_CR_CMD_RESET_RFR           (14 << 4)
  73 #define UART_CR_CMD_PROTECTION_EN       (16 << 4)
  74 #define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
  75 #define UART_CR_CMD_STALE_EVENT_ENABLE  (80 << 4)
  76 #define UART_CR_CMD_FORCE_STALE         (4 << 8)
  77 #define UART_CR_CMD_RESET_TX_READY      (3 << 8)
  78 #define UART_CR_TX_DISABLE              BIT(3)
  79 #define UART_CR_TX_ENABLE               BIT(2)
  80 #define UART_CR_RX_DISABLE              BIT(1)
  81 #define UART_CR_RX_ENABLE               BIT(0)
  82 #define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
  83
  84 #define UART_IMR                        0x0014
  85 #define UART_IMR_TXLEV                  BIT(0)
  86 #define UART_IMR_RXSTALE                BIT(3)
  87 #define UART_IMR_RXLEV                  BIT(4)
  88 #define UART_IMR_DELTA_CTS              BIT(5)
  89 #define UART_IMR_CURRENT_CTS            BIT(6)
  90 #define UART_IMR_RXBREAK_START          BIT(10)
  91
  92 #define UART_IPR_RXSTALE_LAST           0x20
  93 #define UART_IPR_STALE_LSB              0x1F
  94 #define UART_IPR_STALE_TIMEOUT_MSB      0x3FF80
  95 #define UART_DM_IPR_STALE_TIMEOUT_MSB   0xFFFFFF80
  96
  97 #define UART_IPR                        0x0018
  98 #define UART_TFWR                       0x001C
  99 #define UART_RFWR                       0x0020
 100 #define UART_HCR                        0x0024
 101
 102 #define UART_MREG                       0x0028
 103 #define UART_NREG                       0x002C
 104 #define UART_DREG                       0x0030
 105 #define UART_MNDREG                     0x0034
 106 #define UART_IRDA                       0x0038
 107 #define UART_MISR_MODE                  0x0040
 108 #define UART_MISR_RESET                 0x0044
 109 #define UART_MISR_EXPORT                0x0048
 110 #define UART_MISR_VAL                   0x004C
 111 #define UART_TEST_CTRL                  0x0050
 112
 113 #define UART_SR                         0x0008
 114 #define UART_SR_HUNT_CHAR               BIT(7)
 115 #define UART_SR_RX_BREAK                BIT(6)
 116 #define UART_SR_PAR_FRAME_ERR           BIT(5)
 117 #define UART_SR_OVERRUN                 BIT(4)
 118 #define UART_SR_TX_EMPTY                BIT(3)
 119 #define UART_SR_TX_READY                BIT(2)
 120 #define UART_SR_RX_FULL                 BIT(1)
 121 #define UART_SR_RX_READY                BIT(0)
 122
 123 #define UART_RF                         0x000C
 124 #define UARTDM_RF                       0x0070
 125 #define UART_MISR                       0x0010
 126 #define UART_ISR                        0x0014
 127 #define UART_ISR_TX_READY               BIT(7)
 128
 129 #define UARTDM_RXFS                     0x50
 130 #define UARTDM_RXFS_BUF_SHIFT           0x7
 131 #define UARTDM_RXFS_BUF_MASK            0x7
 132
 133 #define UARTDM_DMEN                     0x3C
 134 #define UARTDM_DMEN_RX_SC_ENABLE        BIT(5)
 135 #define UARTDM_DMEN_TX_SC_ENABLE        BIT(4)
 136
 137 #define UARTDM_DMEN_TX_BAM_ENABLE       BIT(2)  /* UARTDM_1P4 */
 138 #define UARTDM_DMEN_TX_DM_ENABLE        BIT(0)  /* < UARTDM_1P4 */
 139
 140 #define UARTDM_DMEN_RX_BAM_ENABLE       BIT(3)  /* UARTDM_1P4 */
 141 #define UARTDM_DMEN_RX_DM_ENABLE        BIT(1)  /* < UARTDM_1P4 */
 142
 143 #define UARTDM_DMRX                     0x34
 144 #define UARTDM_NCF_TX                   0x40
 145 #define UARTDM_RX_TOTAL_SNAP            0x38
 146
 147 #define UARTDM_BURST_SIZE               16   /* in bytes */
 148 #define UARTDM_TX_AIGN(x)               ((x) & ~0x3) /* valid for > 1p3 */
 149 #define UARTDM_TX_MAX                   256   /* in bytes, valid for <= 1p3 */
 150 #define UARTDM_RX_SIZE                  (UART_XMIT_SIZE / 4)
 151
 152 enum {
 153         UARTDM_1P1 = 1,
 154         UARTDM_1P2,
 155         UARTDM_1P3,
 156         UARTDM_1P4,
 157 };
 158
 159 struct msm_dma {
 160         struct dma_chan         *chan;
 161         enum dma_data_direction dir;
 162         dma_addr_t              phys;
 163         unsigned char           *virt;
 164         dma_cookie_t            cookie;
 165         u32                     enable_bit;
 166         unsigned int            count;
 167         struct dma_async_tx_descriptor  *desc;
 168 };
 169
 170 struct msm_port {
 171         struct uart_port        uart;
 172         char                    name[16];
 173         struct clk              *clk;
 174         struct clk              *pclk;
 175         unsigned int            imr;
 176         int                     is_uartdm;
 177         unsigned int            old_snap_state;
 178         bool                    break_detected;
 179         struct msm_dma          tx_dma;
 180         struct msm_dma          rx_dma;
 181 };
 182
 183 #define UART_TO_MSM(uart_port)  container_of(uart_port, struct msm_port, uart)
 184
 185 static
 186 void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
 187 {
 188         writel_relaxed(val, port->membase + off);
 189 }
 190
 191 static
 192 unsigned int msm_read(struct uart_port *port, unsigned int off)
 193 {
 194         return readl_relaxed(port->membase + off);
 195 }
 196
 197 /*
 198  * Setup the MND registers to use the TCXO clock.
 199  */
 200 static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
 201 {
 202         msm_write(port, 0x06, UART_MREG);
 203         msm_write(port, 0xF1, UART_NREG);
 204         msm_write(port, 0x0F, UART_DREG);
 205         msm_write(port, 0x1A, UART_MNDREG);
 206         port->uartclk = 1843200;
 207 }
 208
 209 /*
 210  * Setup the MND registers to use the TCXO clock divided by 4.
 211  */
 212 static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
 213 {
 214         msm_write(port, 0x18, UART_MREG);
 215         msm_write(port, 0xF6, UART_NREG);
 216         msm_write(port, 0x0F, UART_DREG);
 217         msm_write(port, 0x0A, UART_MNDREG);
 218         port->uartclk = 1843200;
 219 }
 220
 221 static void msm_serial_set_mnd_regs(struct uart_port *port)
 222 {
 223         struct msm_port *msm_port = UART_TO_MSM(port);
 224
 225         /*
 226          * These registers don't exist so we change the clk input rate
 227          * on uartdm hardware instead
 228          */
 229         if (msm_port->is_uartdm)
 230                 return;
 231
 232         if (port->uartclk == 19200000)
 233                 msm_serial_set_mnd_regs_tcxo(port);
 234         else if (port->uartclk == 4800000)
 235                 msm_serial_set_mnd_regs_tcxoby4(port);
 236 }
 237
 238 static void msm_handle_tx(struct uart_port *port);
 239 static void msm_start_rx_dma(struct msm_port *msm_port);
 240
 241 static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
 242 {
 243         struct device *dev = port->dev;
 244         unsigned int mapped;
 245         u32 val;
 246
 247         mapped = dma->count;
 248         dma->count = 0;
 249
 250         dmaengine_terminate_all(dma->chan);
 251
 252         /*
 253          * DMA Stall happens if enqueue and flush command happens concurrently.
 254          * For example before changing the baud rate/protocol configuration and
 255          * sending flush command to ADM, disable the channel of UARTDM.
 256          * Note: should not reset the receiver here immediately as it is not
 257          * suggested to do disable/reset or reset/disable at the same time.
 258          */
 259         val = msm_read(port, UARTDM_DMEN);
 260         val &= ~dma->enable_bit;
 261         msm_write(port, val, UARTDM_DMEN);
 262
 263         if (mapped)
 264                 dma_unmap_single(dev, dma->phys, mapped, dma->dir);
 265 }
 266
 267 static void msm_release_dma(struct msm_port *msm_port)
 268 {
 269         struct msm_dma *dma;
 270
 271         dma = &msm_port->tx_dma;
 272         if (dma->chan) {
 273                 msm_stop_dma(&msm_port->uart, dma);
 274                 dma_release_channel(dma->chan);
 275         }
 276
 277         memset(dma, 0, sizeof(*dma));
 278
 279         dma = &msm_port->rx_dma;
 280         if (dma->chan) {
 281                 msm_stop_dma(&msm_port->uart, dma);
 282                 dma_release_channel(dma->chan);
 283                 kfree(dma->virt);
 284         }
 285
 286         memset(dma, 0, sizeof(*dma));
 287 }
 288
 289 static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
 290 {
 291         struct device *dev = msm_port->uart.dev;
 292         struct dma_slave_config conf;
 293         struct msm_dma *dma;
 294         u32 crci = 0;
 295         int ret;
 296
 297         dma = &msm_port->tx_dma;
 298
 299         /* allocate DMA resources, if available */
 300         dma->chan = dma_request_chan(dev, "tx");
 301         if (IS_ERR(dma->chan))
 302                 goto no_tx;
 303
 304         of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
 305
 306         memset(&conf, 0, sizeof(conf));
 307         conf.direction = DMA_MEM_TO_DEV;
 308         conf.device_fc = true;
 309         conf.dst_addr = base + UARTDM_TF;
 310         conf.dst_maxburst = UARTDM_BURST_SIZE;
 311         conf.slave_id = crci;
 312
 313         ret = dmaengine_slave_config(dma->chan, &conf);
 314         if (ret)
 315                 goto rel_tx;
 316
 317         dma->dir = DMA_TO_DEVICE;
 318
 319         if (msm_port->is_uartdm < UARTDM_1P4)
 320                 dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
 321         else
 322                 dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
 323
 324         return;
 325
 326 rel_tx:
 327         dma_release_channel(dma->chan);
 328 no_tx:
 329         memset(dma, 0, sizeof(*dma));
 330 }
 331
 332 static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 333 {
 334         struct device *dev = msm_port->uart.dev;
 335         struct dma_slave_config conf;
 336         struct msm_dma *dma;
 337         u32 crci = 0;
 338         int ret;
 339
 340         dma = &msm_port->rx_dma;
 341
 342         /* allocate DMA resources, if available */
 343         dma->chan = dma_request_chan(dev, "rx");
 344         if (IS_ERR(dma->chan))
 345                 goto no_rx;
 346
 347         of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
 348
 349         dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
 350         if (!dma->virt)
 351                 goto rel_rx;
 352
 353         memset(&conf, 0, sizeof(conf));
 354         conf.direction = DMA_DEV_TO_MEM;
 355         conf.device_fc = true;
 356         conf.src_addr = base + UARTDM_RF;
 357         conf.src_maxburst = UARTDM_BURST_SIZE;
 358         conf.slave_id = crci;
 359
 360         ret = dmaengine_slave_config(dma->chan, &conf);
 361         if (ret)
 362                 goto err;
 363
 364         dma->dir = DMA_FROM_DEVICE;
 365
 366         if (msm_port->is_uartdm < UARTDM_1P4)
 367                 dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
 368         else
 369                 dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
 370
 371         return;
 372 err:
 373         kfree(dma->virt);
 374 rel_rx:
 375         dma_release_channel(dma->chan);
 376 no_rx:
 377         memset(dma, 0, sizeof(*dma));
 378 }
 379
 380 static inline void msm_wait_for_xmitr(struct uart_port *port)
 381 {
 382         unsigned int timeout = 500000;
 383
 384         while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 385                 if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 386                         break;
 387                 udelay(1);
 388                 if (!timeout--)
 389                         break;
 390         }
 391         msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 392 }
 393
 394 static void msm_stop_tx(struct uart_port *port)
 395 {
 396         struct msm_port *msm_port = UART_TO_MSM(port);
 397
 398         msm_port->imr &= ~UART_IMR_TXLEV;
 399         msm_write(port, msm_port->imr, UART_IMR);
 400 }
 401
 402 static void msm_start_tx(struct uart_port *port)
 403 {
 404         struct msm_port *msm_port = UART_TO_MSM(port);
 405         struct msm_dma *dma = &msm_port->tx_dma;
 406
 407         /* Already started in DMA mode */
 408         if (dma->count)
 409                 return;
 410
 411         msm_port->imr |= UART_IMR_TXLEV;
 412         msm_write(port, msm_port->imr, UART_IMR);
 413 }
 414
 415 static void msm_reset_dm_count(struct uart_port *port, int count)
 416 {
 417         msm_wait_for_xmitr(port);
 418         msm_write(port, count, UARTDM_NCF_TX);
 419         msm_read(port, UARTDM_NCF_TX);
 420 }
 421
 422 static void msm_complete_tx_dma(void *args)
 423 {
 424         struct msm_port *msm_port = args;
 425         struct uart_port *port = &msm_port->uart;
 426         struct circ_buf *xmit = &port->state->xmit;
 427         struct msm_dma *dma = &msm_port->tx_dma;
 428         struct dma_tx_state state;
 429         unsigned long flags;
 430         unsigned int count;
 431         u32 val;
 432
 433         spin_lock_irqsave(&port->lock, flags);
 434
 435         /* Already stopped */
 436         if (!dma->count)
 437                 goto done;
 438
 439         dmaengine_tx_status(dma->chan, dma->cookie, &state);
 440
 441         dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
 442
 443         val = msm_read(port, UARTDM_DMEN);
 444         val &= ~dma->enable_bit;
 445         msm_write(port, val, UARTDM_DMEN);
 446
 447         if (msm_port->is_uartdm > UARTDM_1P3) {
 448                 msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
 449                 msm_write(port, UART_CR_TX_ENABLE, UART_CR);
 450         }
 451
 452         count = dma->count - state.residue;
 453         port->icount.tx += count;
 454         dma->count = 0;
 455
 456         xmit->tail += count;
 457         xmit->tail &= UART_XMIT_SIZE - 1;
 458
 459         /* Restore "Tx FIFO below watermark" interrupt */
 460         msm_port->imr |= UART_IMR_TXLEV;
 461         msm_write(port, msm_port->imr, UART_IMR);
 462
 463         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 464                 uart_write_wakeup(port);
 465
 466         msm_handle_tx(port);
 467 done:
 468         spin_unlock_irqrestore(&port->lock, flags);
 469 }
 470
 471 static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
 472 {
 473         struct circ_buf *xmit = &msm_port->uart.state->xmit;
 474         struct uart_port *port = &msm_port->uart;
 475         struct msm_dma *dma = &msm_port->tx_dma;
 476         void *cpu_addr;
 477         int ret;
 478         u32 val;
 479
 480         cpu_addr = &xmit->buf[xmit->tail];
 481
 482         dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
 483         ret = dma_mapping_error(port->dev, dma->phys);
 484         if (ret)
 485                 return ret;
 486
 487         dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
 488                                                 count, DMA_MEM_TO_DEV,
 489                                                 DMA_PREP_INTERRUPT |
 490                                                 DMA_PREP_FENCE);
 491         if (!dma->desc) {
 492                 ret = -EIO;
 493                 goto unmap;
 494         }
 495
 496         dma->desc->callback = msm_complete_tx_dma;
 497         dma->desc->callback_param = msm_port;
 498
 499         dma->cookie = dmaengine_submit(dma->desc);
 500         ret = dma_submit_error(dma->cookie);
 501         if (ret)
 502                 goto unmap;
 503
 504         /*
 505          * Using DMA complete for Tx FIFO reload, no need for
 506          * "Tx FIFO below watermark" one, disable it
 507          */
 508         msm_port->imr &= ~UART_IMR_TXLEV;
 509         msm_write(port, msm_port->imr, UART_IMR);
 510
 511         dma->count = count;
 512
 513         val = msm_read(port, UARTDM_DMEN);
 514         val |= dma->enable_bit;
 515
 516         if (msm_port->is_uartdm < UARTDM_1P4)
 517                 msm_write(port, val, UARTDM_DMEN);
 518
 519         msm_reset_dm_count(port, count);
 520
 521         if (msm_port->is_uartdm > UARTDM_1P3)
 522                 msm_write(port, val, UARTDM_DMEN);
 523
 524         dma_async_issue_pending(dma->chan);
 525         return 0;
 526 unmap:
 527         dma_unmap_single(port->dev, dma->phys, count, dma->dir);
 528         return ret;
 529 }
 530
 531 static void msm_complete_rx_dma(void *args)
 532 {
 533         struct msm_port *msm_port = args;
 534         struct uart_port *port = &msm_port->uart;
 535         struct tty_port *tport = &port->state->port;
 536         struct msm_dma *dma = &msm_port->rx_dma;
 537         int count = 0, i, sysrq;
 538         unsigned long flags;
 539         u32 val;
 540
 541         spin_lock_irqsave(&port->lock, flags);
 542
 543         /* Already stopped */
 544         if (!dma->count)
 545                 goto done;
 546
 547         val = msm_read(port, UARTDM_DMEN);
 548         val &= ~dma->enable_bit;
 549         msm_write(port, val, UARTDM_DMEN);
 550
 551         if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
 552                 port->icount.overrun++;
 553                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 554                 msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
 555         }
 556
 557         count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
 558
 559         port->icount.rx += count;
 560
 561         dma->count = 0;
 562
 563         dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
 564
 565         for (i = 0; i < count; i++) {
 566                 char flag = TTY_NORMAL;
 567
 568                 if (msm_port->break_detected && dma->virt[i] == 0) {
 569                         port->icount.brk++;
 570                         flag = TTY_BREAK;
 571                         msm_port->break_detected = false;
 572                         if (uart_handle_break(port))
 573                                 continue;
 574                 }
 575
 576                 if (!(port->read_status_mask & UART_SR_RX_BREAK))
 577                         flag = TTY_NORMAL;
 578
 579                 spin_unlock_irqrestore(&port->lock, flags);
 580                 sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
 581                 spin_lock_irqsave(&port->lock, flags);
 582                 if (!sysrq)
 583                         tty_insert_flip_char(tport, dma->virt[i], flag);
 584         }
 585
 586         msm_start_rx_dma(msm_port);
 587 done:
 588         spin_unlock_irqrestore(&port->lock, flags);
 589
 590         if (count)
 591                 tty_flip_buffer_push(tport);
 592 }
 593
 594 static void msm_start_rx_dma(struct msm_port *msm_port)
 595 {
 596         struct msm_dma *dma = &msm_port->rx_dma;
 597         struct uart_port *uart = &msm_port->uart;
 598         u32 val;
 599         int ret;
 600
 601         if (!dma->chan)
 602                 return;
 603
 604         dma->phys = dma_map_single(uart->dev, dma->virt,
 605                                    UARTDM_RX_SIZE, dma->dir);
 606         ret = dma_mapping_error(uart->dev, dma->phys);
 607         if (ret)
 608                 goto sw_mode;
 609
 610         dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
 611                                                 UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
 612                                                 DMA_PREP_INTERRUPT);
 613         if (!dma->desc)
 614                 goto unmap;
 615
 616         dma->desc->callback = msm_complete_rx_dma;
 617         dma->desc->callback_param = msm_port;
 618
 619         dma->cookie = dmaengine_submit(dma->desc);
 620         ret = dma_submit_error(dma->cookie);
 621         if (ret)
 622                 goto unmap;
 623         /*
 624          * Using DMA for FIFO off-load, no need for "Rx FIFO over
 625          * watermark" or "stale" interrupts, disable them
 626          */
 627         msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
 628
 629         /*
 630          * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
 631          * we need RXSTALE to flush input DMA fifo to memory
 632          */
 633         if (msm_port->is_uartdm < UARTDM_1P4)
 634                 msm_port->imr |= UART_IMR_RXSTALE;
 635
 636         msm_write(uart, msm_port->imr, UART_IMR);
 637
 638         dma->count = UARTDM_RX_SIZE;
 639
 640         dma_async_issue_pending(dma->chan);
 641
 642         msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
 643         msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
 644
 645         val = msm_read(uart, UARTDM_DMEN);
 646         val |= dma->enable_bit;
 647
 648         if (msm_port->is_uartdm < UARTDM_1P4)
 649                 msm_write(uart, val, UARTDM_DMEN);
 650
 651         msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
 652
 653         if (msm_port->is_uartdm > UARTDM_1P3)
 654                 msm_write(uart, val, UARTDM_DMEN);
 655
 656         return;
 657 unmap:
 658         dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
 659
 660 sw_mode:
 661         /*
 662          * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
 663          * receiver must be reset.
 664          */
 665         msm_write(uart, UART_CR_CMD_RESET_RX, UART_CR);
 666         msm_write(uart, UART_CR_RX_ENABLE, UART_CR);
 667
 668         msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
 669         msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
 670         msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
 671
 672         /* Re-enable RX interrupts */
 673         msm_port->imr |= (UART_IMR_RXLEV | UART_IMR_RXSTALE);
 674         msm_write(uart, msm_port->imr, UART_IMR);
 675 }
 676
 677 static void msm_stop_rx(struct uart_port *port)
 678 {
 679         struct msm_port *msm_port = UART_TO_MSM(port);
 680         struct msm_dma *dma = &msm_port->rx_dma;
 681
 682         msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
 683         msm_write(port, msm_port->imr, UART_IMR);
 684
 685         if (dma->chan)
 686                 msm_stop_dma(port, dma);
 687 }
 688
 689 static void msm_enable_ms(struct uart_port *port)
 690 {
 691         struct msm_port *msm_port = UART_TO_MSM(port);
 692
 693         msm_port->imr |= UART_IMR_DELTA_CTS;
 694         msm_write(port, msm_port->imr, UART_IMR);
 695 }
 696
 697 static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 698         __must_hold(&port->lock)
 699 {
 700         struct tty_port *tport = &port->state->port;
 701         unsigned int sr;
 702         int count = 0;
 703         struct msm_port *msm_port = UART_TO_MSM(port);
 704
 705         if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
 706                 port->icount.overrun++;
 707                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 708                 msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
 709         }
 710
 711         if (misr & UART_IMR_RXSTALE) {
 712                 count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
 713                         msm_port->old_snap_state;
 714                 msm_port->old_snap_state = 0;
 715         } else {
 716                 count = 4 * (msm_read(port, UART_RFWR));
 717                 msm_port->old_snap_state += count;
 718         }
 719
 720         /* TODO: Precise error reporting */
 721
 722         port->icount.rx += count;
 723
 724         while (count > 0) {
 725                 unsigned char buf[4];
 726                 int sysrq, r_count, i;
 727
 728                 sr = msm_read(port, UART_SR);
 729                 if ((sr & UART_SR_RX_READY) == 0) {
 730                         msm_port->old_snap_state -= count;
 731                         break;
 732                 }
 733
 734                 ioread32_rep(port->membase + UARTDM_RF, buf, 1);
 735                 r_count = min_t(int, count, sizeof(buf));
 736
 737                 for (i = 0; i < r_count; i++) {
 738                         char flag = TTY_NORMAL;
 739
 740                         if (msm_port->break_detected && buf[i] == 0) {
 741                                 port->icount.brk++;
 742                                 flag = TTY_BREAK;
 743                                 msm_port->break_detected = false;
 744                                 if (uart_handle_break(port))
 745                                         continue;
 746                         }
 747
 748                         if (!(port->read_status_mask & UART_SR_RX_BREAK))
 749                                 flag = TTY_NORMAL;
 750
 751                         spin_unlock(&port->lock);
 752                         sysrq = uart_handle_sysrq_char(port, buf[i]);
 753                         spin_lock(&port->lock);
 754                         if (!sysrq)
 755                                 tty_insert_flip_char(tport, buf[i], flag);
 756                 }
 757                 count -= r_count;
 758         }
 759
 760         tty_flip_buffer_push(tport);
 761
 762         if (misr & (UART_IMR_RXSTALE))
 763                 msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
 764         msm_write(port, 0xFFFFFF, UARTDM_DMRX);
 765         msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
 766
 767         /* Try to use DMA */
 768         msm_start_rx_dma(msm_port);
 769 }
 770
 771 static void msm_handle_rx(struct uart_port *port)
 772         __must_hold(&port->lock)
 773 {
 774         struct tty_port *tport = &port->state->port;
 775         unsigned int sr;
 776
 777         /*
 778          * Handle overrun. My understanding of the hardware is that overrun
 779          * is not tied to the RX buffer, so we handle the case out of band.
 780          */
 781         if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
 782                 port->icount.overrun++;
 783                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 784                 msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
 785         }
 786
 787         /* and now the main RX loop */
 788         while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
 789                 unsigned int c;
 790                 char flag = TTY_NORMAL;
 791                 int sysrq;
 792
 793                 c = msm_read(port, UART_RF);
 794
 795                 if (sr & UART_SR_RX_BREAK) {
 796                         port->icount.brk++;
 797                         if (uart_handle_break(port))
 798                                 continue;
 799                 } else if (sr & UART_SR_PAR_FRAME_ERR) {
 800                         port->icount.frame++;
 801                 } else {
 802                         port->icount.rx++;
 803                 }
 804
 805                 /* Mask conditions we're ignorning. */
 806                 sr &= port->read_status_mask;
 807
 808                 if (sr & UART_SR_RX_BREAK)
 809                         flag = TTY_BREAK;
 810                 else if (sr & UART_SR_PAR_FRAME_ERR)
 811                         flag = TTY_FRAME;
 812
 813                 spin_unlock(&port->lock);
 814                 sysrq = uart_handle_sysrq_char(port, c);
 815                 spin_lock(&port->lock);
 816                 if (!sysrq)
 817                         tty_insert_flip_char(tport, c, flag);
 818         }
 819
 820         tty_flip_buffer_push(tport);
 821 }
 822
 823 static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 824 {
 825         struct circ_buf *xmit = &port->state->xmit;
 826         struct msm_port *msm_port = UART_TO_MSM(port);
 827         unsigned int num_chars;
 828         unsigned int tf_pointer = 0;
 829         void __iomem *tf;
 830
 831         if (msm_port->is_uartdm)
 832                 tf = port->membase + UARTDM_TF;
 833         else
 834                 tf = port->membase + UART_TF;
 835
 836         if (tx_count && msm_port->is_uartdm)
 837                 msm_reset_dm_count(port, tx_count);
 838
 839         while (tf_pointer < tx_count) {
 840                 int i;
 841                 char buf[4] = { 0 };
 842
 843                 if (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
 844                         break;
 845
 846                 if (msm_port->is_uartdm)
 847                         num_chars = min(tx_count - tf_pointer,
 848                                         (unsigned int)sizeof(buf));
 849                 else
 850                         num_chars = 1;
 851
 852                 for (i = 0; i < num_chars; i++) {
 853                         buf[i] = xmit->buf[xmit->tail + i];
 854                         port->icount.tx++;
 855                 }
 856
 857                 iowrite32_rep(tf, buf, 1);
 858                 xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1);
 859                 tf_pointer += num_chars;
 860         }
 861
 862         /* disable tx interrupts if nothing more to send */
 863         if (uart_circ_empty(xmit))
 864                 msm_stop_tx(port);
 865
 866         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 867                 uart_write_wakeup(port);
 868 }
 869
 870 static void msm_handle_tx(struct uart_port *port)
 871 {
 872         struct msm_port *msm_port = UART_TO_MSM(port);
 873         struct circ_buf *xmit = &msm_port->uart.state->xmit;
 874         struct msm_dma *dma = &msm_port->tx_dma;
 875         unsigned int pio_count, dma_count, dma_min;
 876         char buf[4] = { 0 };
 877         void __iomem *tf;
 878         int err = 0;
 879
 880         if (port->x_char) {
 881                 if (msm_port->is_uartdm)
 882                         tf = port->membase + UARTDM_TF;
 883                 else
 884                         tf = port->membase + UART_TF;
 885
 886                 buf[0] = port->x_char;
 887
 888                 if (msm_port->is_uartdm)
 889                         msm_reset_dm_count(port, 1);
 890
 891                 iowrite32_rep(tf, buf, 1);
 892                 port->icount.tx++;
 893                 port->x_char = 0;
 894                 return;
 895         }
 896
 897         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 898                 msm_stop_tx(port);
 899                 return;
 900         }
 901
 902         pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 903         dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 904
 905         dma_min = 1;    /* Always DMA */
 906         if (msm_port->is_uartdm > UARTDM_1P3) {
 907                 dma_count = UARTDM_TX_AIGN(dma_count);
 908                 dma_min = UARTDM_BURST_SIZE;
 909         } else {
 910                 if (dma_count > UARTDM_TX_MAX)
 911                         dma_count = UARTDM_TX_MAX;
 912         }
 913
 914         if (pio_count > port->fifosize)
 915                 pio_count = port->fifosize;
 916
 917         if (!dma->chan || dma_count < dma_min)
 918                 msm_handle_tx_pio(port, pio_count);
 919         else
 920                 err = msm_handle_tx_dma(msm_port, dma_count);
 921
 922         if (err)        /* fall back to PIO mode */
 923                 msm_handle_tx_pio(port, pio_count);
 924 }
 925
 926 static void msm_handle_delta_cts(struct uart_port *port)
 927 {
 928         msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 929         port->icount.cts++;
 930         wake_up_interruptible(&port->state->port.delta_msr_wait);
 931 }
 932
 933 static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 934 {
 935         struct uart_port *port = dev_id;
 936         struct msm_port *msm_port = UART_TO_MSM(port);
 937         struct msm_dma *dma = &msm_port->rx_dma;
 938         unsigned long flags;
 939         unsigned int misr;
 940         u32 val;
 941
 942         spin_lock_irqsave(&port->lock, flags);
 943         misr = msm_read(port, UART_MISR);
 944         msm_write(port, 0, UART_IMR); /* disable interrupt */
 945
 946         if (misr & UART_IMR_RXBREAK_START) {
 947                 msm_port->break_detected = true;
 948                 msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR);
 949         }
 950
 951         if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
 952                 if (dma->count) {
 953                         val = UART_CR_CMD_STALE_EVENT_DISABLE;
 954                         msm_write(port, val, UART_CR);
 955                         val = UART_CR_CMD_RESET_STALE_INT;
 956                         msm_write(port, val, UART_CR);
 957                         /*
 958                          * Flush DMA input fifo to memory, this will also
 959                          * trigger DMA RX completion
 960                          */
 961                         dmaengine_terminate_all(dma->chan);
 962                 } else if (msm_port->is_uartdm) {
 963                         msm_handle_rx_dm(port, misr);
 964                 } else {
 965                         msm_handle_rx(port);
 966                 }
 967         }
 968         if (misr & UART_IMR_TXLEV)
 969                 msm_handle_tx(port);
 970         if (misr & UART_IMR_DELTA_CTS)
 971                 msm_handle_delta_cts(port);
 972
 973         msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
 974         spin_unlock_irqrestore(&port->lock, flags);
 975
 976         return IRQ_HANDLED;
 977 }
 978
 979 static unsigned int msm_tx_empty(struct uart_port *port)
 980 {
 981         return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
 982 }
 983
 984 static unsigned int msm_get_mctrl(struct uart_port *port)
 985 {
 986         return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
 987 }
 988
 989 static void msm_reset(struct uart_port *port)
 990 {
 991         struct msm_port *msm_port = UART_TO_MSM(port);
 992         unsigned int mr;
 993
 994         /* reset everything */
 995         msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
 996         msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
 997         msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
 998         msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
 999         msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
1000         msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
1001         mr = msm_read(port, UART_MR1);
1002         mr &= ~UART_MR1_RX_RDY_CTL;
1003         msm_write(port, mr, UART_MR1);
1004
1005         /* Disable DM modes */
1006         if (msm_port->is_uartdm)
1007                 msm_write(port, 0, UARTDM_DMEN);
1008 }
1009
1010 static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
1011 {
1012         unsigned int mr;
1013
1014         mr = msm_read(port, UART_MR1);
1015
1016         if (!(mctrl & TIOCM_RTS)) {
1017                 mr &= ~UART_MR1_RX_RDY_CTL;
1018                 msm_write(port, mr, UART_MR1);
1019                 msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
1020         } else {
1021                 mr |= UART_MR1_RX_RDY_CTL;
1022                 msm_write(port, mr, UART_MR1);
1023         }
1024 }
1025
1026 static void msm_break_ctl(struct uart_port *port, int break_ctl)
1027 {
1028         if (break_ctl)
1029                 msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
1030         else
1031                 msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
1032 }
1033
1034 struct msm_baud_map {
1035         u16     divisor;
1036         u8      code;
1037         u8      rxstale;
1038 };
1039
1040 static const struct msm_baud_map *
1041 msm_find_best_baud(struct uart_port *port, unsigned int baud,
1042                    unsigned long *rate)
1043 {
1044         struct msm_port *msm_port = UART_TO_MSM(port);
1045         unsigned int divisor, result;
1046         unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
1047         const struct msm_baud_map *entry, *end, *best;
1048         static const struct msm_baud_map table[] = {
1049                 {    1, 0xff, 31 },
1050                 {    2, 0xee, 16 },
1051                 {    3, 0xdd,  8 },
1052                 {    4, 0xcc,  6 },
1053                 {    6, 0xbb,  6 },
1054                 {    8, 0xaa,  6 },
1055                 {   12, 0x99,  6 },
1056                 {   16, 0x88,  1 },
1057                 {   24, 0x77,  1 },
1058                 {   32, 0x66,  1 },
1059                 {   48, 0x55,  1 },
1060                 {   96, 0x44,  1 },
1061                 {  192, 0x33,  1 },
1062                 {  384, 0x22,  1 },
1063                 {  768, 0x11,  1 },
1064                 { 1536, 0x00,  1 },
1065         };
1066
1067         best = table; /* Default to smallest divider */
1068         target = clk_round_rate(msm_port->clk, 16 * baud);
1069         divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1070
1071         end = table + ARRAY_SIZE(table);
1072         entry = table;
1073         while (entry < end) {
1074                 if (entry->divisor <= divisor) {
1075                         result = target / entry->divisor / 16;
1076                         diff = abs(result - baud);
1077
1078                         /* Keep track of best entry */
1079                         if (diff < best_diff) {
1080                                 best_diff = diff;
1081                                 best = entry;
1082                                 best_rate = target;
1083                         }
1084
1085                         if (result == baud)
1086                                 break;
1087                 } else if (entry->divisor > divisor) {
1088                         old = target;
1089                         target = clk_round_rate(msm_port->clk, old + 1);
1090                         /*
1091                          * The rate didn't get any faster so we can't do
1092                          * better at dividing it down
1093                          */
1094                         if (target == old)
1095                                 break;
1096
1097                         /* Start the divisor search over at this new rate */
1098                         entry = table;
1099                         divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1100                         continue;
1101                 }
1102                 entry++;
1103         }
1104
1105         *rate = best_rate;
1106         return best;
1107 }
1108
1109 static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
1110                              unsigned long *saved_flags)
1111 {
1112         unsigned int rxstale, watermark, mask;
1113         struct msm_port *msm_port = UART_TO_MSM(port);
1114         const struct msm_baud_map *entry;
1115         unsigned long flags, rate;
1116
1117         flags = *saved_flags;
1118         spin_unlock_irqrestore(&port->lock, flags);
1119
1120         entry = msm_find_best_baud(port, baud, &rate);
1121         clk_set_rate(msm_port->clk, rate);
1122         baud = rate / 16 / entry->divisor;
1123
1124         spin_lock_irqsave(&port->lock, flags);
1125         *saved_flags = flags;
1126         port->uartclk = rate;
1127
1128         msm_write(port, entry->code, UART_CSR);
1129
1130         /* RX stale watermark */
1131         rxstale = entry->rxstale;
1132         watermark = UART_IPR_STALE_LSB & rxstale;
1133         if (msm_port->is_uartdm) {
1134                 mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
1135         } else {
1136                 watermark |= UART_IPR_RXSTALE_LAST;
1137                 mask = UART_IPR_STALE_TIMEOUT_MSB;
1138         }
1139
1140         watermark |= mask & (rxstale << 2);
1141
1142         msm_write(port, watermark, UART_IPR);
1143
1144         /* set RX watermark */
1145         watermark = (port->fifosize * 3) / 4;
1146         msm_write(port, watermark, UART_RFWR);
1147
1148         /* set TX watermark */
1149         msm_write(port, 10, UART_TFWR);
1150
1151         msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
1152         msm_reset(port);
1153
1154         /* Enable RX and TX */
1155         msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR);
1156
1157         /* turn on RX and CTS interrupts */
1158         msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
1159                         UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START;
1160
1161         msm_write(port, msm_port->imr, UART_IMR);
1162
1163         if (msm_port->is_uartdm) {
1164                 msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
1165                 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1166                 msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
1167         }
1168
1169         return baud;
1170 }
1171
1172 static void msm_init_clock(struct uart_port *port)
1173 {
1174         struct msm_port *msm_port = UART_TO_MSM(port);
1175
1176         clk_prepare_enable(msm_port->clk);
1177         clk_prepare_enable(msm_port->pclk);
1178         msm_serial_set_mnd_regs(port);
1179 }
1180
1181 static int msm_startup(struct uart_port *port)
1182 {
1183         struct msm_port *msm_port = UART_TO_MSM(port);
1184         unsigned int data, rfr_level, mask;
1185         int ret;
1186
1187         snprintf(msm_port->name, sizeof(msm_port->name),
1188                  "msm_serial%d", port->line);
1189
1190         msm_init_clock(port);
1191
1192         if (likely(port->fifosize > 12))
1193                 rfr_level = port->fifosize - 12;
1194         else
1195                 rfr_level = port->fifosize;
1196
1197         /* set automatic RFR level */
1198         data = msm_read(port, UART_MR1);
1199
1200         if (msm_port->is_uartdm)
1201                 mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
1202         else
1203                 mask = UART_MR1_AUTO_RFR_LEVEL1;
1204
1205         data &= ~mask;
1206         data &= ~UART_MR1_AUTO_RFR_LEVEL0;
1207         data |= mask & (rfr_level << 2);
1208         data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
1209         msm_write(port, data, UART_MR1);
1210
1211         if (msm_port->is_uartdm) {
1212                 msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
1213                 msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
1214         }
1215
1216         ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
1217                           msm_port->name, port);
1218         if (unlikely(ret))
1219                 goto err_irq;
1220
1221         return 0;
1222
1223 err_irq:
1224         if (msm_port->is_uartdm)
1225                 msm_release_dma(msm_port);
1226
1227         clk_disable_unprepare(msm_port->pclk);
1228         clk_disable_unprepare(msm_port->clk);
1229
1230         return ret;
1231 }
1232
1233 static void msm_shutdown(struct uart_port *port)
1234 {
1235         struct msm_port *msm_port = UART_TO_MSM(port);
1236
1237         msm_port->imr = 0;
1238         msm_write(port, 0, UART_IMR); /* disable interrupts */
1239
1240         if (msm_port->is_uartdm)
1241                 msm_release_dma(msm_port);
1242
1243         clk_disable_unprepare(msm_port->clk);
1244
1245         free_irq(port->irq, port);
1246 }
1247
1248 static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
1249                             struct ktermios *old)
1250 {
1251         struct msm_port *msm_port = UART_TO_MSM(port);
1252         struct msm_dma *dma = &msm_port->rx_dma;
1253         unsigned long flags;
1254         unsigned int baud, mr;
1255
1256         spin_lock_irqsave(&port->lock, flags);
1257
1258         if (dma->chan) /* Terminate if any */
1259                 msm_stop_dma(port, dma);
1260
1261         /* calculate and set baud rate */
1262         baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
1263         baud = msm_set_baud_rate(port, baud, &flags);
1264         if (tty_termios_baud_rate(termios))
1265                 tty_termios_encode_baud_rate(termios, baud, baud);
1266
1267         /* calculate parity */
1268         mr = msm_read(port, UART_MR2);
1269         mr &= ~UART_MR2_PARITY_MODE;
1270         if (termios->c_cflag & PARENB) {
1271                 if (termios->c_cflag & PARODD)
1272                         mr |= UART_MR2_PARITY_MODE_ODD;
1273                 else if (termios->c_cflag & CMSPAR)
1274                         mr |= UART_MR2_PARITY_MODE_SPACE;
1275                 else
1276                         mr |= UART_MR2_PARITY_MODE_EVEN;
1277         }
1278
1279         /* calculate bits per char */
1280         mr &= ~UART_MR2_BITS_PER_CHAR;
1281         switch (termios->c_cflag & CSIZE) {
1282         case CS5:
1283                 mr |= UART_MR2_BITS_PER_CHAR_5;
1284                 break;
1285         case CS6:
1286                 mr |= UART_MR2_BITS_PER_CHAR_6;
1287                 break;
1288         case CS7:
1289                 mr |= UART_MR2_BITS_PER_CHAR_7;
1290                 break;
1291         case CS8:
1292         default:
1293                 mr |= UART_MR2_BITS_PER_CHAR_8;
1294                 break;
1295         }
1296
1297         /* calculate stop bits */
1298         mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
1299         if (termios->c_cflag & CSTOPB)
1300                 mr |= UART_MR2_STOP_BIT_LEN_TWO;
1301         else
1302                 mr |= UART_MR2_STOP_BIT_LEN_ONE;
1303
1304         /* set parity, bits per char, and stop bit */
1305         msm_write(port, mr, UART_MR2);
1306
1307         /* calculate and set hardware flow control */
1308         mr = msm_read(port, UART_MR1);
1309         mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
1310         if (termios->c_cflag & CRTSCTS) {
1311                 mr |= UART_MR1_CTS_CTL;
1312                 mr |= UART_MR1_RX_RDY_CTL;
1313         }
1314         msm_write(port, mr, UART_MR1);
1315
1316         /* Configure status bits to ignore based on termio flags. */
1317         port->read_status_mask = 0;
1318         if (termios->c_iflag & INPCK)
1319                 port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
1320         if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
1321                 port->read_status_mask |= UART_SR_RX_BREAK;
1322
1323         uart_update_timeout(port, termios->c_cflag, baud);
1324
1325         /* Try to use DMA */
1326         msm_start_rx_dma(msm_port);
1327
1328         spin_unlock_irqrestore(&port->lock, flags);
1329 }
1330
1331 static const char *msm_type(struct uart_port *port)
1332 {
1333         return "MSM";
1334 }
1335
1336 static void msm_release_port(struct uart_port *port)
1337 {
1338         struct platform_device *pdev = to_platform_device(port->dev);
1339         struct resource *uart_resource;
1340         resource_size_t size;
1341
1342         uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1343         if (unlikely(!uart_resource))
1344                 return;
1345         size = resource_size(uart_resource);
1346
1347         release_mem_region(port->mapbase, size);
1348         iounmap(port->membase);
1349         port->membase = NULL;
1350 }
1351
1352 static int msm_request_port(struct uart_port *port)
1353 {
1354         struct platform_device *pdev = to_platform_device(port->dev);
1355         struct resource *uart_resource;
1356         resource_size_t size;
1357         int ret;
1358
1359         uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1360         if (unlikely(!uart_resource))
1361                 return -ENXIO;
1362
1363         size = resource_size(uart_resource);
1364
1365         if (!request_mem_region(port->mapbase, size, "msm_serial"))
1366                 return -EBUSY;
1367
1368         port->membase = ioremap(port->mapbase, size);
1369         if (!port->membase) {
1370                 ret = -EBUSY;
1371                 goto fail_release_port;
1372         }
1373
1374         return 0;
1375
1376 fail_release_port:
1377         release_mem_region(port->mapbase, size);
1378         return ret;
1379 }
1380
1381 static void msm_config_port(struct uart_port *port, int flags)
1382 {
1383         int ret;
1384
1385         if (flags & UART_CONFIG_TYPE) {
1386                 port->type = PORT_MSM;
1387                 ret = msm_request_port(port);
1388                 if (ret)
1389                         return;
1390         }
1391 }
1392
1393 static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
1394 {
1395         if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
1396                 return -EINVAL;
1397         if (unlikely(port->irq != ser->irq))
1398                 return -EINVAL;
1399         return 0;
1400 }
1401
1402 static void msm_power(struct uart_port *port, unsigned int state,
1403                       unsigned int oldstate)
1404 {
1405         struct msm_port *msm_port = UART_TO_MSM(port);
1406
1407         switch (state) {
1408         case 0:
1409                 clk_prepare_enable(msm_port->clk);
1410                 clk_prepare_enable(msm_port->pclk);
1411                 break;
1412         case 3:
1413                 clk_disable_unprepare(msm_port->clk);
1414                 clk_disable_unprepare(msm_port->pclk);
1415                 break;
1416         default:
1417                 pr_err("msm_serial: Unknown PM state %d\n", state);
1418         }
1419 }
1420
1421 #ifdef CONFIG_CONSOLE_POLL
1422 static int msm_poll_get_char_single(struct uart_port *port)
1423 {
1424         struct msm_port *msm_port = UART_TO_MSM(port);
1425         unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
1426
1427         if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
1428                 return NO_POLL_CHAR;
1429
1430         return msm_read(port, rf_reg) & 0xff;
1431 }
1432
1433 static int msm_poll_get_char_dm(struct uart_port *port)
1434 {
1435         int c;
1436         static u32 slop;
1437         static int count;
1438         unsigned char *sp = (unsigned char *)&slop;
1439
1440         /* Check if a previous read had more than one char */
1441         if (count) {
1442                 c = sp[sizeof(slop) - count];
1443                 count--;
1444         /* Or if FIFO is empty */
1445         } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
1446                 /*
1447                  * If RX packing buffer has less than a word, force stale to
1448                  * push contents into RX FIFO
1449                  */
1450                 count = msm_read(port, UARTDM_RXFS);
1451                 count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
1452                 if (count) {
1453                         msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
1454                         slop = msm_read(port, UARTDM_RF);
1455                         c = sp[0];
1456                         count--;
1457                         msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
1458                         msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1459                         msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE,
1460                                   UART_CR);
1461                 } else {
1462                         c = NO_POLL_CHAR;
1463                 }
1464         /* FIFO has a word */
1465         } else {
1466                 slop = msm_read(port, UARTDM_RF);
1467                 c = sp[0];
1468                 count = sizeof(slop) - 1;
1469         }
1470
1471         return c;
1472 }
1473
1474 static int msm_poll_get_char(struct uart_port *port)
1475 {
1476         u32 imr;
1477         int c;
1478         struct msm_port *msm_port = UART_TO_MSM(port);
1479
1480         /* Disable all interrupts */
1481         imr = msm_read(port, UART_IMR);
1482         msm_write(port, 0, UART_IMR);
1483
1484         if (msm_port->is_uartdm)
1485                 c = msm_poll_get_char_dm(port);
1486         else
1487                 c = msm_poll_get_char_single(port);
1488
1489         /* Enable interrupts */
1490         msm_write(port, imr, UART_IMR);
1491
1492         return c;
1493 }
1494
1495 static void msm_poll_put_char(struct uart_port *port, unsigned char c)
1496 {
1497         u32 imr;
1498         struct msm_port *msm_port = UART_TO_MSM(port);
1499
1500         /* Disable all interrupts */
1501         imr = msm_read(port, UART_IMR);
1502         msm_write(port, 0, UART_IMR);
1503
1504         if (msm_port->is_uartdm)
1505                 msm_reset_dm_count(port, 1);
1506
1507         /* Wait until FIFO is empty */
1508         while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
1509                 cpu_relax();
1510
1511         /* Write a character */
1512         msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
1513
1514         /* Wait until FIFO is empty */
1515         while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
1516                 cpu_relax();
1517
1518         /* Enable interrupts */
1519         msm_write(port, imr, UART_IMR);
1520 }
1521 #endif
1522
1523 static const struct uart_ops msm_uart_pops = {
1524         .tx_empty = msm_tx_empty,
1525         .set_mctrl = msm_set_mctrl,
1526         .get_mctrl = msm_get_mctrl,
1527         .stop_tx = msm_stop_tx,
1528         .start_tx = msm_start_tx,
1529         .stop_rx = msm_stop_rx,
1530         .enable_ms = msm_enable_ms,
1531         .break_ctl = msm_break_ctl,
1532         .startup = msm_startup,
1533         .shutdown = msm_shutdown,
1534         .set_termios = msm_set_termios,
1535         .type = msm_type,
1536         .release_port = msm_release_port,
1537         .request_port = msm_request_port,
1538         .config_port = msm_config_port,
1539         .verify_port = msm_verify_port,
1540         .pm = msm_power,
1541 #ifdef CONFIG_CONSOLE_POLL
1542         .poll_get_char  = msm_poll_get_char,
1543         .poll_put_char  = msm_poll_put_char,
1544 #endif
1545 };
1546
1547 static struct msm_port msm_uart_ports[] = {
1548         {
1549                 .uart = {
1550                         .iotype = UPIO_MEM,
1551                         .ops = &msm_uart_pops,
1552                         .flags = UPF_BOOT_AUTOCONF,
1553                         .fifosize = 64,
1554                         .line = 0,
1555                 },
1556         },
1557         {
1558                 .uart = {
1559                         .iotype = UPIO_MEM,
1560                         .ops = &msm_uart_pops,
1561                         .flags = UPF_BOOT_AUTOCONF,
1562                         .fifosize = 64,
1563                         .line = 1,
1564                 },
1565         },
1566         {
1567                 .uart = {
1568                         .iotype = UPIO_MEM,
1569                         .ops = &msm_uart_pops,
1570                         .flags = UPF_BOOT_AUTOCONF,
1571                         .fifosize = 64,
1572                         .line = 2,
1573                 },
1574         },
1575 };
1576
1577 #define UART_NR ARRAY_SIZE(msm_uart_ports)
1578
1579 static inline struct uart_port *msm_get_port_from_line(unsigned int line)
1580 {
1581         return &msm_uart_ports[line].uart;
1582 }
1583
1584 #ifdef CONFIG_SERIAL_MSM_CONSOLE
1585 static void __msm_console_write(struct uart_port *port, const char *s,
1586                                 unsigned int count, bool is_uartdm)
1587 {
1588         int i;
1589         int num_newlines = 0;
1590         bool replaced = false;
1591         void __iomem *tf;
1592         int locked = 1;
1593
1594         if (is_uartdm)
1595                 tf = port->membase + UARTDM_TF;
1596         else
1597                 tf = port->membase + UART_TF;
1598
1599         /* Account for newlines that will get a carriage return added */
1600         for (i = 0; i < count; i++)
1601                 if (s[i] == '\n')
1602                         num_newlines++;
1603         count += num_newlines;
1604
1605         if (port->sysrq)
1606                 locked = 0;
1607         else if (oops_in_progress)
1608                 locked = spin_trylock(&port->lock);
1609         else
1610                 spin_lock(&port->lock);
1611
1612         if (is_uartdm)
1613                 msm_reset_dm_count(port, count);
1614
1615         i = 0;
1616         while (i < count) {
1617                 int j;
1618                 unsigned int num_chars;
1619                 char buf[4] = { 0 };
1620
1621                 if (is_uartdm)
1622                         num_chars = min(count - i, (unsigned int)sizeof(buf));
1623                 else
1624                         num_chars = 1;
1625
1626                 for (j = 0; j < num_chars; j++) {
1627                         char c = *s;
1628
1629                         if (c == '\n' && !replaced) {
1630                                 buf[j] = '\r';
1631                                 j++;
1632                                 replaced = true;
1633                         }
1634                         if (j < num_chars) {
1635                                 buf[j] = c;
1636                                 s++;
1637                                 replaced = false;
1638                         }
1639                 }
1640
1641                 while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
1642                         cpu_relax();
1643
1644                 iowrite32_rep(tf, buf, 1);
1645                 i += num_chars;
1646         }
1647
1648         if (locked)
1649                 spin_unlock(&port->lock);
1650 }
1651
1652 static void msm_console_write(struct console *co, const char *s,
1653                               unsigned int count)
1654 {
1655         struct uart_port *port;
1656         struct msm_port *msm_port;
1657
1658         BUG_ON(co->index < 0 || co->index >= UART_NR);
1659
1660         port = msm_get_port_from_line(co->index);
1661         msm_port = UART_TO_MSM(port);
1662
1663         __msm_console_write(port, s, count, msm_port->is_uartdm);
1664 }
1665
1666 static int msm_console_setup(struct console *co, char *options)
1667 {
1668         struct uart_port *port;
1669         int baud = 115200;
1670         int bits = 8;
1671         int parity = 'n';
1672         int flow = 'n';
1673
1674         if (unlikely(co->index >= UART_NR || co->index < 0))
1675                 return -ENXIO;
1676
1677         port = msm_get_port_from_line(co->index);
1678
1679         if (unlikely(!port->membase))
1680                 return -ENXIO;
1681
1682         msm_init_clock(port);
1683
1684         if (options)
1685                 uart_parse_options(options, &baud, &parity, &bits, &flow);
1686
1687         pr_info("msm_serial: console setup on port #%d\n", port->line);
1688
1689         return uart_set_options(port, co, baud, parity, bits, flow);
1690 }
1691
1692 static void
1693 msm_serial_early_write(struct console *con, const char *s, unsigned n)
1694 {
1695         struct earlycon_device *dev = con->data;
1696
1697         __msm_console_write(&dev->port, s, n, false);
1698 }
1699
1700 static int __init
1701 msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
1702 {
1703         if (!device->port.membase)
1704                 return -ENODEV;
1705
1706         device->con->write = msm_serial_early_write;
1707         return 0;
1708 }
1709 OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
1710                     msm_serial_early_console_setup);
1711
1712 static void
1713 msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
1714 {
1715         struct earlycon_device *dev = con->data;
1716
1717         __msm_console_write(&dev->port, s, n, true);
1718 }
1719
1720 static int __init
1721 msm_serial_early_console_setup_dm(struct earlycon_device *device,
1722                                   const char *opt)
1723 {
1724         if (!device->port.membase)
1725                 return -ENODEV;
1726
1727         device->con->write = msm_serial_early_write_dm;
1728         return 0;
1729 }
1730 OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
1731                     msm_serial_early_console_setup_dm);
1732
1733 static struct uart_driver msm_uart_driver;
1734
1735 static struct console msm_console = {
1736         .name = "ttyMSM",
1737         .write = msm_console_write,
1738         .device = uart_console_device,
1739         .setup = msm_console_setup,
1740         .flags = CON_PRINTBUFFER,
1741         .index = -1,
1742         .data = &msm_uart_driver,
1743 };
1744
1745 #define MSM_CONSOLE     (&msm_console)
1746
1747 #else
1748 #define MSM_CONSOLE     NULL
1749 #endif
1750
1751 static struct uart_driver msm_uart_driver = {
1752         .owner = THIS_MODULE,
1753         .driver_name = "msm_serial",
1754         .dev_name = "ttyMSM",
1755         .nr = UART_NR,
1756         .cons = MSM_CONSOLE,
1757 };
1758
1759 static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
1760
1761 static const struct of_device_id msm_uartdm_table[] = {
1762         { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
1763         { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
1764         { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
1765         { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
1766         { }
1767 };
1768
1769 static int msm_serial_probe(struct platform_device *pdev)
1770 {
1771         struct msm_port *msm_port;
1772         struct resource *resource;
1773         struct uart_port *port;
1774         const struct of_device_id *id;
1775         int irq, line;
1776
1777         if (pdev->dev.of_node)
1778                 line = of_alias_get_id(pdev->dev.of_node, "serial");
1779         else
1780                 line = pdev->id;
1781
1782         if (line < 0)
1783                 line = atomic_inc_return(&msm_uart_next_id) - 1;
1784
1785         if (unlikely(line < 0 || line >= UART_NR))
1786                 return -ENXIO;
1787
1788         dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
1789
1790         port = msm_get_port_from_line(line);
1791         port->dev = &pdev->dev;
1792         msm_port = UART_TO_MSM(port);
1793
1794         id = of_match_device(msm_uartdm_table, &pdev->dev);
1795         if (id)
1796                 msm_port->is_uartdm = (unsigned long)id->data;
1797         else
1798                 msm_port->is_uartdm = 0;
1799
1800         msm_port->clk = devm_clk_get(&pdev->dev, "core");
1801         if (IS_ERR(msm_port->clk))
1802                 return PTR_ERR(msm_port->clk);
1803
1804         if (msm_port->is_uartdm) {
1805                 msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
1806                 if (IS_ERR(msm_port->pclk))
1807                         return PTR_ERR(msm_port->pclk);
1808         }
1809
1810         port->uartclk = clk_get_rate(msm_port->clk);
1811         dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
1812
1813         resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1814         if (unlikely(!resource))
1815                 return -ENXIO;
1816         port->mapbase = resource->start;
1817
1818         irq = platform_get_irq(pdev, 0);
1819         if (unlikely(irq < 0))
1820                 return -ENXIO;
1821         port->irq = irq;
1822         port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE);
1823
1824         platform_set_drvdata(pdev, port);
1825
1826         return uart_add_one_port(&msm_uart_driver, port);
1827 }
1828
1829 static int msm_serial_remove(struct platform_device *pdev)
1830 {
1831         struct uart_port *port = platform_get_drvdata(pdev);
1832
1833         uart_remove_one_port(&msm_uart_driver, port);
1834
1835         return 0;
1836 }
1837
1838 static const struct of_device_id msm_match_table[] = {
1839         { .compatible = "qcom,msm-uart" },
1840         { .compatible = "qcom,msm-uartdm" },
1841         {}
1842 };
1843 MODULE_DEVICE_TABLE(of, msm_match_table);
1844
1845 static int __maybe_unused msm_serial_suspend(struct device *dev)
1846 {
1847         struct msm_port *port = dev_get_drvdata(dev);
1848
1849         uart_suspend_port(&msm_uart_driver, &port->uart);
1850
1851         return 0;
1852 }
1853
1854 static int __maybe_unused msm_serial_resume(struct device *dev)
1855 {
1856         struct msm_port *port = dev_get_drvdata(dev);
1857
1858         uart_resume_port(&msm_uart_driver, &port->uart);
1859
1860         return 0;
1861 }
1862
1863 static const struct dev_pm_ops msm_serial_dev_pm_ops = {
1864         SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
1865 };
1866
1867 static struct platform_driver msm_platform_driver = {
1868         .remove = msm_serial_remove,
1869         .probe = msm_serial_probe,
1870         .driver = {
1871                 .name = "msm_serial",
1872                 .pm = &msm_serial_dev_pm_ops,
1873                 .of_match_table = msm_match_table,
1874         },
1875 };
1876
1877 static int __init msm_serial_init(void)
1878 {
1879         int ret;
1880
1881         ret = uart_register_driver(&msm_uart_driver);
1882         if (unlikely(ret))
1883                 return ret;
1884
1885         ret = platform_driver_register(&msm_platform_driver);
1886         if (unlikely(ret))
1887                 uart_unregister_driver(&msm_uart_driver);
1888
1889         pr_info("msm_serial: driver initialized\n");
1890
1891         return ret;
1892 }
1893
1894 static void __exit msm_serial_exit(void)
1895 {
1896         platform_driver_unregister(&msm_platform_driver);
1897         uart_unregister_driver(&msm_uart_driver);
1898 }
1899
1900 module_init(msm_serial_init);
1901 module_exit(msm_serial_exit);
1902
1903 MODULE_AUTHOR("Robert Love <rlove@google.com>");
1904 MODULE_DESCRIPTION("Driver for msm7x serial device");
1905 MODULE_LICENSE("GPL");