drivers/staging/slicoss/slicoss.c

   1 /**************************************************************************
   2  *
   3  * Copyright  2000-2006 Alacritech, Inc.  All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  *
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above
  12  *    copyright notice, this list of conditions and the following
  13  *    disclaimer in the documentation and/or other materials provided
  14  *    with the distribution.
  15  *
  16  * Alternatively, this software may be distributed under the terms of the
  17  * GNU General Public License ("GPL") version 2 as published by the Free
  18  * Software Foundation.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
  21  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
  24  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  27  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  28  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  30  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  31  * SUCH DAMAGE.
  32  *
  33  * The views and conclusions contained in the software and documentation
  34  * are those of the authors and should not be interpreted as representing
  35  * official policies, either expressed or implied, of Alacritech, Inc.
  36  *
  37  **************************************************************************/
  38
  39 /*
  40  * FILENAME: slicoss.c
  41  *
  42  * The SLICOSS driver for Alacritech's IS-NIC products.
  43  *
  44  * This driver is supposed to support:
  45  *
  46  *      Mojave cards (single port PCI Gigabit) both copper and fiber
  47  *      Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
  48  *      Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
  49  *
  50  * The driver was actually tested on Oasis and Kalahari cards.
  51  *
  52  *
  53  * NOTE: This is the standard, non-accelerated version of Alacritech's
  54  *       IS-NIC driver.
  55  */
  56
  57 #define KLUDGE_FOR_4GB_BOUNDARY         1
  58 #define DEBUG_MICROCODE                 1
  59 #define DBG                             1
  60 #define SLIC_INTERRUPT_PROCESS_LIMIT    1
  61 #define SLIC_OFFLOAD_IP_CHECKSUM        1
  62 #define STATS_TIMER_INTERVAL            2
  63 #define PING_TIMER_INTERVAL             1
  64 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  65
  66 #include <linux/kernel.h>
  67 #include <linux/string.h>
  68 #include <linux/errno.h>
  69 #include <linux/ioport.h>
  70 #include <linux/slab.h>
  71 #include <linux/interrupt.h>
  72 #include <linux/timer.h>
  73 #include <linux/pci.h>
  74 #include <linux/spinlock.h>
  75 #include <linux/init.h>
  76 #include <linux/bitops.h>
  77 #include <linux/io.h>
  78 #include <linux/netdevice.h>
  79 #include <linux/crc32.h>
  80 #include <linux/etherdevice.h>
  81 #include <linux/skbuff.h>
  82 #include <linux/delay.h>
  83 #include <linux/seq_file.h>
  84 #include <linux/kthread.h>
  85 #include <linux/module.h>
  86
  87 #include <linux/firmware.h>
  88 #include <linux/types.h>
  89 #include <linux/dma-mapping.h>
  90 #include <linux/mii.h>
  91 #include <linux/if_vlan.h>
  92 #include <asm/unaligned.h>
  93
  94 #include <linux/ethtool.h>
  95 #include <linux/uaccess.h>
  96 #include "slichw.h"
  97 #include "slic.h"
  98
  99 static uint slic_first_init = 1;
 100 static char *slic_banner = "Alacritech SLIC Technology(tm) Server and Storage Accelerator (Non-Accelerated)";
 101
 102 static char *slic_proc_version = "2.0.351  2006/07/14 12:26:00";
 103
 104 static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
 105 #define DEFAULT_INTAGG_DELAY 100
 106 static unsigned int rcv_count;
 107
 108 #define DRV_NAME          "slicoss"
 109 #define DRV_VERSION       "2.0.1"
 110 #define DRV_AUTHOR        "Alacritech, Inc. Engineering"
 111 #define DRV_DESCRIPTION   "Alacritech SLIC Techonology(tm) "\
 112                 "Non-Accelerated Driver"
 113 #define DRV_COPYRIGHT     "Copyright  2000-2006 Alacritech, Inc. "\
 114                 "All rights reserved."
 115 #define PFX                DRV_NAME " "
 116
 117 MODULE_AUTHOR(DRV_AUTHOR);
 118 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 119 MODULE_LICENSE("Dual BSD/GPL");
 120
 121 static const struct pci_device_id slic_pci_tbl[] = {
 122         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_1GB_DEVICE_ID) },
 123         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_2GB_DEVICE_ID) },
 124         { 0 }
 125 };
 126
 127 static struct ethtool_ops slic_ethtool_ops;
 128
 129 MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
 130
 131 static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
 132 {
 133         writel(value, reg);
 134         if (flush)
 135                 mb();
 136 }
 137
 138 static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
 139                                     u32 value, void __iomem *regh, u32 paddrh,
 140                                     bool flush)
 141 {
 142         unsigned long flags;
 143
 144         spin_lock_irqsave(&adapter->bit64reglock, flags);
 145         writel(paddrh, regh);
 146         writel(value, reg);
 147         if (flush)
 148                 mb();
 149         spin_unlock_irqrestore(&adapter->bit64reglock, flags);
 150 }
 151
 152 static void slic_mcast_set_bit(struct adapter *adapter, char *address)
 153 {
 154         unsigned char crcpoly;
 155
 156         /* Get the CRC polynomial for the mac address */
 157         /*
 158          * we use bits 1-8 (lsb), bitwise reversed,
 159          * msb (= lsb bit 0 before bitrev) is automatically discarded
 160          */
 161         crcpoly = ether_crc(ETH_ALEN, address) >> 23;
 162
 163         /*
 164          * We only have space on the SLIC for 64 entries.  Lop
 165          * off the top two bits. (2^6 = 64)
 166          */
 167         crcpoly &= 0x3F;
 168
 169         /* OR in the new bit into our 64 bit mask. */
 170         adapter->mcastmask |= (u64)1 << crcpoly;
 171 }
 172
 173 static void slic_mcast_set_mask(struct adapter *adapter)
 174 {
 175         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 176
 177         if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
 178                 /*
 179                  * Turn on all multicast addresses. We have to do this for
 180                  * promiscuous mode as well as ALLMCAST mode.  It saves the
 181                  * Microcode from having to keep state about the MAC
 182                  * configuration.
 183                  */
 184                 slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
 185                 slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
 186                                  FLUSH);
 187         } else {
 188                 /*
 189                  * Commit our multicast mast to the SLIC by writing to the
 190                  * multicast address mask registers
 191                  */
 192                 slic_reg32_write(&slic_regs->slic_mcastlow,
 193                         (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
 194                 slic_reg32_write(&slic_regs->slic_mcasthigh,
 195                         (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
 196         }
 197 }
 198
 199 static void slic_timer_ping(ulong dev)
 200 {
 201         struct adapter *adapter;
 202         struct sliccard *card;
 203
 204         adapter = netdev_priv((struct net_device *)dev);
 205         card = adapter->card;
 206
 207         adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
 208         add_timer(&adapter->pingtimer);
 209 }
 210
 211 static void slic_unmap_mmio_space(struct adapter *adapter)
 212 {
 213         if (adapter->slic_regs)
 214                 iounmap(adapter->slic_regs);
 215         adapter->slic_regs = NULL;
 216 }
 217
 218 /*
 219  *  slic_link_config
 220  *
 221  *  Write phy control to configure link duplex/speed
 222  *
 223  */
 224 static void slic_link_config(struct adapter *adapter,
 225                       u32 linkspeed, u32 linkduplex)
 226 {
 227         u32 __iomem *wphy;
 228         u32 speed;
 229         u32 duplex;
 230         u32 phy_config;
 231         u32 phy_advreg;
 232         u32 phy_gctlreg;
 233
 234         if (adapter->state != ADAPT_UP)
 235                 return;
 236
 237         if (linkspeed > LINK_1000MB)
 238                 linkspeed = LINK_AUTOSPEED;
 239         if (linkduplex > LINK_AUTOD)
 240                 linkduplex = LINK_AUTOD;
 241
 242         wphy = &adapter->slic_regs->slic_wphy;
 243
 244         if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
 245                 if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
 246                         /*
 247                          * We've got a fiber gigabit interface, and register
 248                          *  4 is different in fiber mode than in copper mode
 249                          */
 250
 251                         /* advertise FD only @1000 Mb */
 252                         phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
 253                         /* enable PAUSE frames        */
 254                         phy_advreg |= PAR_ASYMPAUSE_FIBER;
 255                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 256
 257                         if (linkspeed == LINK_AUTOSPEED) {
 258                                 /* reset phy, enable auto-neg  */
 259                                 phy_config =
 260                                     (MIICR_REG_PCR |
 261                                      (PCR_RESET | PCR_AUTONEG |
 262                                       PCR_AUTONEG_RST));
 263                                 slic_reg32_write(wphy, phy_config, FLUSH);
 264                         } else {        /* forced 1000 Mb FD*/
 265                                 /*
 266                                  * power down phy to break link
 267                                  * this may not work)
 268                                  */
 269                                 phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
 270                                 slic_reg32_write(wphy, phy_config, FLUSH);
 271                                 /*
 272                                  * wait, Marvell says 1 sec,
 273                                  * try to get away with 10 ms
 274                                  */
 275                                 mdelay(10);
 276
 277                                 /*
 278                                  * disable auto-neg, set speed/duplex,
 279                                  * soft reset phy, powerup
 280                                  */
 281                                 phy_config =
 282                                     (MIICR_REG_PCR |
 283                                      (PCR_RESET | PCR_SPEED_1000 |
 284                                       PCR_DUPLEX_FULL));
 285                                 slic_reg32_write(wphy, phy_config, FLUSH);
 286                         }
 287                 } else {        /* copper gigabit */
 288
 289                         /*
 290                          * Auto-Negotiate or 1000 Mb must be auto negotiated
 291                          * We've got a copper gigabit interface, and
 292                          * register 4 is different in copper mode than
 293                          * in fiber mode
 294                          */
 295                         if (linkspeed == LINK_AUTOSPEED) {
 296                                 /* advertise 10/100 Mb modes   */
 297                                 phy_advreg =
 298                                     (MIICR_REG_4 |
 299                                      (PAR_ADV100FD | PAR_ADV100HD | PAR_ADV10FD
 300                                       | PAR_ADV10HD));
 301                         } else {
 302                         /*
 303                          * linkspeed == LINK_1000MB -
 304                          * don't advertise 10/100 Mb modes
 305                          */
 306                                 phy_advreg = MIICR_REG_4;
 307                         }
 308                         /* enable PAUSE frames  */
 309                         phy_advreg |= PAR_ASYMPAUSE;
 310                         /* required by the Cicada PHY  */
 311                         phy_advreg |= PAR_802_3;
 312                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 313                         /* advertise FD only @1000 Mb  */
 314                         phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
 315                         slic_reg32_write(wphy, phy_gctlreg, FLUSH);
 316
 317                         if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 318                                 /*
 319                                  * if a Marvell PHY
 320                                  * enable auto crossover
 321                                  */
 322                                 phy_config =
 323                                     (MIICR_REG_16 | (MRV_REG16_XOVERON));
 324                                 slic_reg32_write(wphy, phy_config, FLUSH);
 325
 326                                 /* reset phy, enable auto-neg  */
 327                                 phy_config =
 328                                     (MIICR_REG_PCR |
 329                                      (PCR_RESET | PCR_AUTONEG |
 330                                       PCR_AUTONEG_RST));
 331                                 slic_reg32_write(wphy, phy_config, FLUSH);
 332                         } else {        /* it's a Cicada PHY  */
 333                                 /* enable and restart auto-neg (don't reset)  */
 334                                 phy_config =
 335                                     (MIICR_REG_PCR |
 336                                      (PCR_AUTONEG | PCR_AUTONEG_RST));
 337                                 slic_reg32_write(wphy, phy_config, FLUSH);
 338                         }
 339                 }
 340         } else {
 341                 /* Forced 10/100  */
 342                 if (linkspeed == LINK_10MB)
 343                         speed = 0;
 344                 else
 345                         speed = PCR_SPEED_100;
 346                 if (linkduplex == LINK_HALFD)
 347                         duplex = 0;
 348                 else
 349                         duplex = PCR_DUPLEX_FULL;
 350
 351                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 352                         /*
 353                          * if a Marvell PHY
 354                          * disable auto crossover
 355                          */
 356                         phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
 357                         slic_reg32_write(wphy, phy_config, FLUSH);
 358                 }
 359
 360                 /* power down phy to break link (this may not work)  */
 361                 phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
 362                 slic_reg32_write(wphy, phy_config, FLUSH);
 363
 364                 /* wait, Marvell says 1 sec, try to get away with 10 ms */
 365                 mdelay(10);
 366
 367                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 368                         /*
 369                          * if a Marvell PHY
 370                          * disable auto-neg, set speed,
 371                          * soft reset phy, powerup
 372                          */
 373                         phy_config =
 374                             (MIICR_REG_PCR | (PCR_RESET | speed | duplex));
 375                         slic_reg32_write(wphy, phy_config, FLUSH);
 376                 } else {        /* it's a Cicada PHY  */
 377                         /* disable auto-neg, set speed, powerup  */
 378                         phy_config = (MIICR_REG_PCR | (speed | duplex));
 379                         slic_reg32_write(wphy, phy_config, FLUSH);
 380                 }
 381         }
 382 }
 383
 384 static int slic_card_download_gbrcv(struct adapter *adapter)
 385 {
 386         const struct firmware *fw;
 387         const char *file = "";
 388         int ret;
 389         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 390         u32 codeaddr;
 391         u32 instruction;
 392         int index = 0;
 393         u32 rcvucodelen = 0;
 394
 395         switch (adapter->devid) {
 396         case SLIC_2GB_DEVICE_ID:
 397                 file = "slicoss/oasisrcvucode.sys";
 398                 break;
 399         case SLIC_1GB_DEVICE_ID:
 400                 file = "slicoss/gbrcvucode.sys";
 401                 break;
 402         default:
 403                 return -ENOENT;
 404         }
 405
 406         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 407         if (ret) {
 408                 dev_err(&adapter->pcidev->dev,
 409                         "Failed to load firmware %s\n", file);
 410                 return ret;
 411         }
 412
 413         rcvucodelen = *(u32 *)(fw->data + index);
 414         index += 4;
 415         switch (adapter->devid) {
 416         case SLIC_2GB_DEVICE_ID:
 417                 if (rcvucodelen != OasisRcvUCodeLen) {
 418                         release_firmware(fw);
 419                         return -EINVAL;
 420                 }
 421                 break;
 422         case SLIC_1GB_DEVICE_ID:
 423                 if (rcvucodelen != GBRcvUCodeLen) {
 424                         release_firmware(fw);
 425                         return -EINVAL;
 426                 }
 427                 break;
 428         }
 429         /* start download */
 430         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
 431         /* download the rcv sequencer ucode */
 432         for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
 433                 /* write out instruction address */
 434                 slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
 435
 436                 instruction = *(u32 *)(fw->data + index);
 437                 index += 4;
 438                 /* write out the instruction data low addr */
 439                 slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
 440
 441                 instruction = *(u8 *)(fw->data + index);
 442                 index++;
 443                 /* write out the instruction data high addr */
 444                 slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
 445                                  FLUSH);
 446         }
 447
 448         /* download finished */
 449         release_firmware(fw);
 450         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
 451         return 0;
 452 }
 453
 454 MODULE_FIRMWARE("slicoss/oasisrcvucode.sys");
 455 MODULE_FIRMWARE("slicoss/gbrcvucode.sys");
 456
 457 static int slic_card_download(struct adapter *adapter)
 458 {
 459         const struct firmware *fw;
 460         const char *file = "";
 461         int ret;
 462         u32 section;
 463         int thissectionsize;
 464         int codeaddr;
 465         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 466         u32 instruction;
 467         u32 baseaddress;
 468         u32 i;
 469         u32 numsects = 0;
 470         u32 sectsize[3];
 471         u32 sectstart[3];
 472         int ucode_start, index = 0;
 473
 474         switch (adapter->devid) {
 475         case SLIC_2GB_DEVICE_ID:
 476                 file = "slicoss/oasisdownload.sys";
 477                 break;
 478         case SLIC_1GB_DEVICE_ID:
 479                 file = "slicoss/gbdownload.sys";
 480                 break;
 481         default:
 482                 return -ENOENT;
 483         }
 484         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 485         if (ret) {
 486                 dev_err(&adapter->pcidev->dev,
 487                         "Failed to load firmware %s\n", file);
 488                 return ret;
 489         }
 490         numsects = *(u32 *)(fw->data + index);
 491         index += 4;
 492         for (i = 0; i < numsects; i++) {
 493                 sectsize[i] = *(u32 *)(fw->data + index);
 494                 index += 4;
 495         }
 496         for (i = 0; i < numsects; i++) {
 497                 sectstart[i] = *(u32 *)(fw->data + index);
 498                 index += 4;
 499         }
 500         ucode_start = index;
 501         instruction = *(u32 *)(fw->data + index);
 502         index += 4;
 503         for (section = 0; section < numsects; section++) {
 504                 baseaddress = sectstart[section];
 505                 thissectionsize = sectsize[section] >> 3;
 506
 507                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 508                         /* Write out instruction address */
 509                         slic_reg32_write(&slic_regs->slic_wcs,
 510                                          baseaddress + codeaddr, FLUSH);
 511                         /* Write out instruction to low addr */
 512                         slic_reg32_write(&slic_regs->slic_wcs,
 513                                         instruction, FLUSH);
 514                         instruction = *(u32 *)(fw->data + index);
 515                         index += 4;
 516
 517                         /* Write out instruction to high addr */
 518                         slic_reg32_write(&slic_regs->slic_wcs,
 519                                         instruction, FLUSH);
 520                         instruction = *(u32 *)(fw->data + index);
 521                         index += 4;
 522                 }
 523         }
 524         index = ucode_start;
 525         for (section = 0; section < numsects; section++) {
 526                 instruction = *(u32 *)(fw->data + index);
 527                 baseaddress = sectstart[section];
 528                 if (baseaddress < 0x8000)
 529                         continue;
 530                 thissectionsize = sectsize[section] >> 3;
 531
 532                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 533                         /* Write out instruction address */
 534                         slic_reg32_write(&slic_regs->slic_wcs,
 535                                 SLIC_WCS_COMPARE | (baseaddress + codeaddr),
 536                                 FLUSH);
 537                         /* Write out instruction to low addr */
 538                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 539                                          FLUSH);
 540                         instruction = *(u32 *)(fw->data + index);
 541                         index += 4;
 542                         /* Write out instruction to high addr */
 543                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 544                                          FLUSH);
 545                         instruction = *(u32 *)(fw->data + index);
 546                         index += 4;
 547
 548                 }
 549         }
 550         release_firmware(fw);
 551         /* Everything OK, kick off the card */
 552         mdelay(10);
 553         slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
 554
 555         /*
 556          * stall for 20 ms, long enough for ucode to init card
 557          * and reach mainloop
 558          */
 559         mdelay(20);
 560
 561         return 0;
 562 }
 563
 564 MODULE_FIRMWARE("slicoss/oasisdownload.sys");
 565 MODULE_FIRMWARE("slicoss/gbdownload.sys");
 566
 567 static void slic_adapter_set_hwaddr(struct adapter *adapter)
 568 {
 569         struct sliccard *card = adapter->card;
 570
 571         if ((adapter->card) && (card->config_set)) {
 572                 memcpy(adapter->macaddr,
 573                        card->config.MacInfo[adapter->functionnumber].macaddrA,
 574                        sizeof(struct slic_config_mac));
 575                 if (is_zero_ether_addr(adapter->currmacaddr))
 576                         memcpy(adapter->currmacaddr, adapter->macaddr,
 577                                ETH_ALEN);
 578                 if (adapter->netdev)
 579                         memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
 580                                ETH_ALEN);
 581         }
 582 }
 583
 584 static void slic_intagg_set(struct adapter *adapter, u32 value)
 585 {
 586         slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
 587         adapter->card->loadlevel_current = value;
 588 }
 589
 590 static void slic_soft_reset(struct adapter *adapter)
 591 {
 592         if (adapter->card->state == CARD_UP) {
 593                 slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
 594                 mdelay(1);
 595         }
 596
 597         slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
 598                          FLUSH);
 599         mdelay(1);
 600 }
 601
 602 static void slic_mac_address_config(struct adapter *adapter)
 603 {
 604         u32 value;
 605         u32 value2;
 606         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 607
 608         value = ntohl(*(__be32 *)&adapter->currmacaddr[2]);
 609         slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
 610         slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
 611
 612         value2 = (u32)((adapter->currmacaddr[0] << 8 |
 613                              adapter->currmacaddr[1]) & 0xFFFF);
 614
 615         slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
 616         slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
 617
 618         /*
 619          * Write our multicast mask out to the card.  This is done
 620          * here in addition to the slic_mcast_addr_set routine
 621          * because ALL_MCAST may have been enabled or disabled
 622          */
 623         slic_mcast_set_mask(adapter);
 624 }
 625
 626 static void slic_mac_config(struct adapter *adapter)
 627 {
 628         u32 value;
 629         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 630
 631         /* Setup GMAC gaps */
 632         if (adapter->linkspeed == LINK_1000MB) {
 633                 value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
 634                          (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
 635                          (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
 636         } else {
 637                 value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
 638                          (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
 639                          (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
 640         }
 641
 642         /* enable GMII */
 643         if (adapter->linkspeed == LINK_1000MB)
 644                 value |= GMCR_GBIT;
 645
 646         /* enable fullduplex */
 647         if ((adapter->linkduplex == LINK_FULLD)
 648             || (adapter->macopts & MAC_LOOPBACK)) {
 649                 value |= GMCR_FULLD;
 650         }
 651
 652         /* write mac config */
 653         slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
 654
 655         /* setup mac addresses */
 656         slic_mac_address_config(adapter);
 657 }
 658
 659 static void slic_config_set(struct adapter *adapter, bool linkchange)
 660 {
 661         u32 value;
 662         u32 RcrReset;
 663         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 664
 665         if (linkchange) {
 666                 /* Setup MAC */
 667                 slic_mac_config(adapter);
 668                 RcrReset = GRCR_RESET;
 669         } else {
 670                 slic_mac_address_config(adapter);
 671                 RcrReset = 0;
 672         }
 673
 674         if (adapter->linkduplex == LINK_FULLD) {
 675                 /* setup xmtcfg */
 676                 value = (GXCR_RESET |   /* Always reset     */
 677                          GXCR_XMTEN |   /* Enable transmit  */
 678                          GXCR_PAUSEEN); /* Enable pause     */
 679
 680                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 681
 682                 /* Setup rcvcfg last */
 683                 value = (RcrReset |     /* Reset, if linkchange */
 684                          GRCR_CTLEN |   /* Enable CTL frames    */
 685                          GRCR_ADDRAEN | /* Address A enable     */
 686                          GRCR_RCVBAD |  /* Rcv bad frames       */
 687                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 688         } else {
 689                 /* setup xmtcfg */
 690                 value = (GXCR_RESET |   /* Always reset     */
 691                          GXCR_XMTEN);   /* Enable transmit  */
 692
 693                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 694
 695                 /* Setup rcvcfg last */
 696                 value = (RcrReset |     /* Reset, if linkchange */
 697                          GRCR_ADDRAEN | /* Address A enable     */
 698                          GRCR_RCVBAD |  /* Rcv bad frames       */
 699                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 700         }
 701
 702         if (adapter->state != ADAPT_DOWN) {
 703                 /* Only enable receive if we are restarting or running */
 704                 value |= GRCR_RCVEN;
 705         }
 706
 707         if (adapter->macopts & MAC_PROMISC)
 708                 value |= GRCR_RCVALL;
 709
 710         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 711 }
 712
 713 /*
 714  *  Turn off RCV and XMT, power down PHY
 715  */
 716 static void slic_config_clear(struct adapter *adapter)
 717 {
 718         u32 value;
 719         u32 phy_config;
 720         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 721
 722         /* Setup xmtcfg */
 723         value = (GXCR_RESET |   /* Always reset */
 724                  GXCR_PAUSEEN); /* Enable pause */
 725
 726         slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 727
 728         value = (GRCR_RESET |   /* Always reset      */
 729                  GRCR_CTLEN |   /* Enable CTL frames */
 730                  GRCR_ADDRAEN | /* Address A enable  */
 731                  (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 732
 733         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 734
 735         /* power down phy */
 736         phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
 737         slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
 738 }
 739
 740 static bool slic_mac_filter(struct adapter *adapter,
 741                         struct ether_header *ether_frame)
 742 {
 743         struct net_device *netdev = adapter->netdev;
 744         u32 opts = adapter->macopts;
 745
 746         if (opts & MAC_PROMISC)
 747                 return true;
 748
 749         if (is_broadcast_ether_addr(ether_frame->ether_dhost)) {
 750                 if (opts & MAC_BCAST) {
 751                         adapter->rcv_broadcasts++;
 752                         return true;
 753                 }
 754
 755                 return false;
 756         }
 757
 758         if (is_multicast_ether_addr(ether_frame->ether_dhost)) {
 759                 if (opts & MAC_ALLMCAST) {
 760                         adapter->rcv_multicasts++;
 761                         netdev->stats.multicast++;
 762                         return true;
 763                 }
 764                 if (opts & MAC_MCAST) {
 765                         struct mcast_address *mcaddr = adapter->mcastaddrs;
 766
 767                         while (mcaddr) {
 768                                 if (ether_addr_equal(mcaddr->address,
 769                                                      ether_frame->ether_dhost)) {
 770                                         adapter->rcv_multicasts++;
 771                                         netdev->stats.multicast++;
 772                                         return true;
 773                                 }
 774                                 mcaddr = mcaddr->next;
 775                         }
 776
 777                         return false;
 778                 }
 779
 780                 return false;
 781         }
 782         if (opts & MAC_DIRECTED) {
 783                 adapter->rcv_unicasts++;
 784                 return true;
 785         }
 786         return false;
 787 }
 788
 789 static int slic_mac_set_address(struct net_device *dev, void *ptr)
 790 {
 791         struct adapter *adapter = netdev_priv(dev);
 792         struct sockaddr *addr = ptr;
 793
 794         if (netif_running(dev))
 795                 return -EBUSY;
 796         if (!adapter)
 797                 return -EBUSY;
 798
 799         if (!is_valid_ether_addr(addr->sa_data))
 800                 return -EINVAL;
 801
 802         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 803         memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
 804
 805         slic_config_set(adapter, true);
 806         return 0;
 807 }
 808
 809 static void slic_timer_load_check(ulong cardaddr)
 810 {
 811         struct sliccard *card = (struct sliccard *)cardaddr;
 812         struct adapter *adapter = card->master;
 813         u32 __iomem *intagg;
 814         u32 load = card->events;
 815         u32 level = 0;
 816
 817         if ((adapter) && (adapter->state == ADAPT_UP) &&
 818             (card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
 819                 intagg = &adapter->slic_regs->slic_intagg;
 820                 if (adapter->devid == SLIC_1GB_DEVICE_ID) {
 821                         if (adapter->linkspeed == LINK_1000MB)
 822                                 level = 100;
 823                         else {
 824                                 if (load > SLIC_LOAD_5)
 825                                         level = SLIC_INTAGG_5;
 826                                 else if (load > SLIC_LOAD_4)
 827                                         level = SLIC_INTAGG_4;
 828                                 else if (load > SLIC_LOAD_3)
 829                                         level = SLIC_INTAGG_3;
 830                                 else if (load > SLIC_LOAD_2)
 831                                         level = SLIC_INTAGG_2;
 832                                 else if (load > SLIC_LOAD_1)
 833                                         level = SLIC_INTAGG_1;
 834                                 else
 835                                         level = SLIC_INTAGG_0;
 836                         }
 837                         if (card->loadlevel_current != level) {
 838                                 card->loadlevel_current = level;
 839                                 slic_reg32_write(intagg, level, FLUSH);
 840                         }
 841                 } else {
 842                         if (load > SLIC_LOAD_5)
 843                                 level = SLIC_INTAGG_5;
 844                         else if (load > SLIC_LOAD_4)
 845                                 level = SLIC_INTAGG_4;
 846                         else if (load > SLIC_LOAD_3)
 847                                 level = SLIC_INTAGG_3;
 848                         else if (load > SLIC_LOAD_2)
 849                                 level = SLIC_INTAGG_2;
 850                         else if (load > SLIC_LOAD_1)
 851                                 level = SLIC_INTAGG_1;
 852                         else
 853                                 level = SLIC_INTAGG_0;
 854                         if (card->loadlevel_current != level) {
 855                                 card->loadlevel_current = level;
 856                                 slic_reg32_write(intagg, level, FLUSH);
 857                         }
 858                 }
 859         }
 860         card->events = 0;
 861         card->loadtimer.expires = jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
 862         add_timer(&card->loadtimer);
 863 }
 864
 865 static int slic_upr_queue_request(struct adapter *adapter,
 866                            u32 upr_request,
 867                            u32 upr_data,
 868                            u32 upr_data_h,
 869                            u32 upr_buffer, u32 upr_buffer_h)
 870 {
 871         struct slic_upr *upr;
 872         struct slic_upr *uprqueue;
 873
 874         upr = kmalloc(sizeof(*upr), GFP_ATOMIC);
 875         if (!upr)
 876                 return -ENOMEM;
 877
 878         upr->adapter = adapter->port;
 879         upr->upr_request = upr_request;
 880         upr->upr_data = upr_data;
 881         upr->upr_buffer = upr_buffer;
 882         upr->upr_data_h = upr_data_h;
 883         upr->upr_buffer_h = upr_buffer_h;
 884         upr->next = NULL;
 885         if (adapter->upr_list) {
 886                 uprqueue = adapter->upr_list;
 887
 888                 while (uprqueue->next)
 889                         uprqueue = uprqueue->next;
 890                 uprqueue->next = upr;
 891         } else {
 892                 adapter->upr_list = upr;
 893         }
 894         return 0;
 895 }
 896
 897 static void slic_upr_start(struct adapter *adapter)
 898 {
 899         struct slic_upr *upr;
 900         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 901
 902         upr = adapter->upr_list;
 903         if (!upr)
 904                 return;
 905         if (adapter->upr_busy)
 906                 return;
 907         adapter->upr_busy = 1;
 908
 909         switch (upr->upr_request) {
 910         case SLIC_UPR_STATS:
 911                 if (upr->upr_data_h == 0) {
 912                         slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
 913                                          FLUSH);
 914                 } else {
 915                         slic_reg64_write(adapter, &slic_regs->slic_stats64,
 916                                          upr->upr_data,
 917                                          &slic_regs->slic_addr_upper,
 918                                          upr->upr_data_h, FLUSH);
 919                 }
 920                 break;
 921
 922         case SLIC_UPR_RLSR:
 923                 slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
 924                                  &slic_regs->slic_addr_upper, upr->upr_data_h,
 925                                  FLUSH);
 926                 break;
 927
 928         case SLIC_UPR_RCONFIG:
 929                 slic_reg64_write(adapter, &slic_regs->slic_rconfig,
 930                                  upr->upr_data, &slic_regs->slic_addr_upper,
 931                                  upr->upr_data_h, FLUSH);
 932                 break;
 933         case SLIC_UPR_PING:
 934                 slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
 935                 break;
 936         }
 937 }
 938
 939 static int slic_upr_request(struct adapter *adapter,
 940                      u32 upr_request,
 941                      u32 upr_data,
 942                      u32 upr_data_h,
 943                      u32 upr_buffer, u32 upr_buffer_h)
 944 {
 945         unsigned long flags;
 946         int rc;
 947
 948         spin_lock_irqsave(&adapter->upr_lock, flags);
 949         rc = slic_upr_queue_request(adapter,
 950                                         upr_request,
 951                                         upr_data,
 952                                         upr_data_h, upr_buffer, upr_buffer_h);
 953         if (rc)
 954                 goto err_unlock_irq;
 955
 956         slic_upr_start(adapter);
 957 err_unlock_irq:
 958         spin_unlock_irqrestore(&adapter->upr_lock, flags);
 959         return rc;
 960 }
 961
 962 static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
 963 {
 964         u32 linkstatus = adapter->pshmem->linkstatus;
 965         uint linkup;
 966         unsigned char linkspeed;
 967         unsigned char linkduplex;
 968
 969         if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
 970                 struct slic_shmem *pshmem;
 971
 972                 pshmem = (struct slic_shmem *)(unsigned long)
 973                          adapter->phys_shmem;
 974 #if BITS_PER_LONG == 64
 975                 slic_upr_queue_request(adapter,
 976                                        SLIC_UPR_RLSR,
 977                                        SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
 978                                        SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
 979                                        0, 0);
 980 #else
 981                 slic_upr_queue_request(adapter,
 982                                        SLIC_UPR_RLSR,
 983                                        (u32)&pshmem->linkstatus,
 984                                        SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
 985 #endif
 986                 return;
 987         }
 988         if (adapter->state != ADAPT_UP)
 989                 return;
 990
 991         linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
 992         if (linkstatus & GIG_SPEED_1000)
 993                 linkspeed = LINK_1000MB;
 994         else if (linkstatus & GIG_SPEED_100)
 995                 linkspeed = LINK_100MB;
 996         else
 997                 linkspeed = LINK_10MB;
 998
 999         if (linkstatus & GIG_FULLDUPLEX)
1000                 linkduplex = LINK_FULLD;
1001         else
1002                 linkduplex = LINK_HALFD;
1003
1004         if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
1005                 return;
1006
1007         /* link up event, but nothing has changed */
1008         if ((adapter->linkstate == LINK_UP) &&
1009             (linkup == LINK_UP) &&
1010             (adapter->linkspeed == linkspeed) &&
1011             (adapter->linkduplex == linkduplex))
1012                 return;
1013
1014         /* link has changed at this point */
1015
1016         /* link has gone from up to down */
1017         if (linkup == LINK_DOWN) {
1018                 adapter->linkstate = LINK_DOWN;
1019                 return;
1020         }
1021
1022         /* link has gone from down to up */
1023         adapter->linkspeed = linkspeed;
1024         adapter->linkduplex = linkduplex;
1025
1026         if (adapter->linkstate != LINK_UP) {
1027                 /* setup the mac */
1028                 slic_config_set(adapter, true);
1029                 adapter->linkstate = LINK_UP;
1030                 netif_start_queue(adapter->netdev);
1031         }
1032 }
1033
1034 static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
1035 {
1036         struct sliccard *card = adapter->card;
1037         struct slic_upr *upr;
1038         unsigned long flags;
1039
1040         spin_lock_irqsave(&adapter->upr_lock, flags);
1041         upr = adapter->upr_list;
1042         if (!upr) {
1043                 spin_unlock_irqrestore(&adapter->upr_lock, flags);
1044                 return;
1045         }
1046         adapter->upr_list = upr->next;
1047         upr->next = NULL;
1048         adapter->upr_busy = 0;
1049         switch (upr->upr_request) {
1050         case SLIC_UPR_STATS:
1051                 {
1052                         struct slic_stats *slicstats =
1053                             (struct slic_stats *)&adapter->pshmem->inicstats;
1054                         struct slic_stats *newstats = slicstats;
1055                         struct slic_stats  *old = &adapter->inicstats_prev;
1056                         struct slicnet_stats *stst = &adapter->slic_stats;
1057
1058                         if (isr & ISR_UPCERR) {
1059                                 dev_err(&adapter->netdev->dev,
1060                                         "SLIC_UPR_STATS command failed isr[%x]\n",
1061                                         isr);
1062
1063                                 break;
1064                         }
1065                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs,
1066                                         newstats->xmit_tcp_segs_gb,
1067                                         old->xmit_tcp_segs_gb);
1068
1069                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes,
1070                                         newstats->xmit_tcp_bytes_gb,
1071                                         old->xmit_tcp_bytes_gb);
1072
1073                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs,
1074                                         newstats->rcv_tcp_segs_gb,
1075                                         old->rcv_tcp_segs_gb);
1076
1077                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes,
1078                                         newstats->rcv_tcp_bytes_gb,
1079                                         old->rcv_tcp_bytes_gb);
1080
1081                         UPDATE_STATS_GB(stst->iface.xmt_bytes,
1082                                         newstats->xmit_bytes_gb,
1083                                         old->xmit_bytes_gb);
1084
1085                         UPDATE_STATS_GB(stst->iface.xmt_ucast,
1086                                         newstats->xmit_unicasts_gb,
1087                                         old->xmit_unicasts_gb);
1088
1089                         UPDATE_STATS_GB(stst->iface.rcv_bytes,
1090                                         newstats->rcv_bytes_gb,
1091                                         old->rcv_bytes_gb);
1092
1093                         UPDATE_STATS_GB(stst->iface.rcv_ucast,
1094                                         newstats->rcv_unicasts_gb,
1095                                         old->rcv_unicasts_gb);
1096
1097                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1098                                         newstats->xmit_collisions_gb,
1099                                         old->xmit_collisions_gb);
1100
1101                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1102                                         newstats->xmit_excess_collisions_gb,
1103                                         old->xmit_excess_collisions_gb);
1104
1105                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1106                                         newstats->xmit_other_error_gb,
1107                                         old->xmit_other_error_gb);
1108
1109                         UPDATE_STATS_GB(stst->iface.rcv_errors,
1110                                         newstats->rcv_other_error_gb,
1111                                         old->rcv_other_error_gb);
1112
1113                         UPDATE_STATS_GB(stst->iface.rcv_discards,
1114                                         newstats->rcv_drops_gb,
1115                                         old->rcv_drops_gb);
1116
1117                         if (newstats->rcv_drops_gb > old->rcv_drops_gb) {
1118                                 adapter->rcv_drops +=
1119                                     (newstats->rcv_drops_gb -
1120                                      old->rcv_drops_gb);
1121                         }
1122                         memcpy(old, newstats, sizeof(struct slic_stats));
1123                         break;
1124                 }
1125         case SLIC_UPR_RLSR:
1126                 slic_link_upr_complete(adapter, isr);
1127                 break;
1128         case SLIC_UPR_RCONFIG:
1129                 break;
1130         case SLIC_UPR_PING:
1131                 card->pingstatus |= (isr & ISR_PINGDSMASK);
1132                 break;
1133         }
1134         kfree(upr);
1135         slic_upr_start(adapter);
1136         spin_unlock_irqrestore(&adapter->upr_lock, flags);
1137 }
1138
1139 static int slic_config_get(struct adapter *adapter, u32 config, u32 config_h)
1140 {
1141         return slic_upr_request(adapter, SLIC_UPR_RCONFIG, config, config_h,
1142                                 0, 0);
1143 }
1144
1145 /*
1146  * Compute a checksum of the EEPROM according to RFC 1071.
1147  */
1148 static u16 slic_eeprom_cksum(void *eeprom, unsigned int len)
1149 {
1150         u16 *wp = eeprom;
1151         u32 checksum = 0;
1152
1153         while (len > 1) {
1154                 checksum += *(wp++);
1155                 len -= 2;
1156         }
1157
1158         if (len > 0)
1159                 checksum += *(u8 *)wp;
1160
1161         while (checksum >> 16)
1162                 checksum = (checksum & 0xFFFF) + ((checksum >> 16) & 0xFFFF);
1163
1164         return ~checksum;
1165 }
1166
1167 static void slic_rspqueue_free(struct adapter *adapter)
1168 {
1169         int i;
1170         struct slic_rspqueue *rspq = &adapter->rspqueue;
1171
1172         for (i = 0; i < rspq->num_pages; i++) {
1173                 if (rspq->vaddr[i]) {
1174                         pci_free_consistent(adapter->pcidev, PAGE_SIZE,
1175                                             rspq->vaddr[i], rspq->paddr[i]);
1176                 }
1177                 rspq->vaddr[i] = NULL;
1178                 rspq->paddr[i] = 0;
1179         }
1180         rspq->offset = 0;
1181         rspq->pageindex = 0;
1182         rspq->rspbuf = NULL;
1183 }
1184
1185 static int slic_rspqueue_init(struct adapter *adapter)
1186 {
1187         int i;
1188         struct slic_rspqueue *rspq = &adapter->rspqueue;
1189         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
1190         u32 paddrh = 0;
1191
1192         memset(rspq, 0, sizeof(struct slic_rspqueue));
1193
1194         rspq->num_pages = SLIC_RSPQ_PAGES_GB;
1195
1196         for (i = 0; i < rspq->num_pages; i++) {
1197                 rspq->vaddr[i] = pci_zalloc_consistent(adapter->pcidev,
1198                                                        PAGE_SIZE,
1199                                                        &rspq->paddr[i]);
1200                 if (!rspq->vaddr[i]) {
1201                         dev_err(&adapter->pcidev->dev,
1202                                 "pci_alloc_consistent failed\n");
1203                         slic_rspqueue_free(adapter);
1204                         return -ENOMEM;
1205                 }
1206
1207                 if (paddrh == 0) {
1208                         slic_reg32_write(&slic_regs->slic_rbar,
1209                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1210                                 DONT_FLUSH);
1211                 } else {
1212                         slic_reg64_write(adapter, &slic_regs->slic_rbar64,
1213                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1214                                 &slic_regs->slic_addr_upper,
1215                                 paddrh, DONT_FLUSH);
1216                 }
1217         }
1218         rspq->offset = 0;
1219         rspq->pageindex = 0;
1220         rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
1221         return 0;
1222 }
1223
1224 static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
1225 {
1226         struct slic_rspqueue *rspq = &adapter->rspqueue;
1227         struct slic_rspbuf *buf;
1228
1229         if (!(rspq->rspbuf->status))
1230                 return NULL;
1231
1232         buf = rspq->rspbuf;
1233         if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
1234                 rspq->rspbuf++;
1235         } else {
1236                 slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
1237                         (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
1238                         &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
1239                 rspq->pageindex = (rspq->pageindex + 1) % rspq->num_pages;
1240                 rspq->offset = 0;
1241                 rspq->rspbuf = (struct slic_rspbuf *)
1242                                                 rspq->vaddr[rspq->pageindex];
1243         }
1244
1245         return buf;
1246 }
1247
1248 static void slic_cmdqmem_free(struct adapter *adapter)
1249 {
1250         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1251         int i;
1252
1253         for (i = 0; i < SLIC_CMDQ_MAXPAGES; i++) {
1254                 if (cmdqmem->pages[i]) {
1255                         pci_free_consistent(adapter->pcidev,
1256                                             PAGE_SIZE,
1257                                             (void *)cmdqmem->pages[i],
1258                                             cmdqmem->dma_pages[i]);
1259                 }
1260         }
1261         memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
1262 }
1263
1264 static u32 *slic_cmdqmem_addpage(struct adapter *adapter)
1265 {
1266         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1267         u32 *pageaddr;
1268
1269         if (cmdqmem->pagecnt >= SLIC_CMDQ_MAXPAGES)
1270                 return NULL;
1271         pageaddr = pci_alloc_consistent(adapter->pcidev,
1272                                         PAGE_SIZE,
1273                                         &cmdqmem->dma_pages[cmdqmem->pagecnt]);
1274         if (!pageaddr)
1275                 return NULL;
1276
1277         cmdqmem->pages[cmdqmem->pagecnt] = pageaddr;
1278         cmdqmem->pagecnt++;
1279         return pageaddr;
1280 }
1281
1282 static void slic_cmdq_free(struct adapter *adapter)
1283 {
1284         struct slic_hostcmd *cmd;
1285
1286         cmd = adapter->cmdq_all.head;
1287         while (cmd) {
1288                 if (cmd->busy) {
1289                         struct sk_buff *tempskb;
1290
1291                         tempskb = cmd->skb;
1292                         if (tempskb) {
1293                                 cmd->skb = NULL;
1294                                 dev_kfree_skb_irq(tempskb);
1295                         }
1296                 }
1297                 cmd = cmd->next_all;
1298         }
1299         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1300         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1301         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1302         slic_cmdqmem_free(adapter);
1303 }
1304
1305 static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
1306 {
1307         struct slic_hostcmd *cmd;
1308         struct slic_hostcmd *prev;
1309         struct slic_hostcmd *tail;
1310         struct slic_cmdqueue *cmdq;
1311         int cmdcnt;
1312         void *cmdaddr;
1313         ulong phys_addr;
1314         u32 phys_addrl;
1315         u32 phys_addrh;
1316         struct slic_handle *pslic_handle;
1317         unsigned long flags;
1318
1319         cmdaddr = page;
1320         cmd = cmdaddr;
1321         cmdcnt = 0;
1322
1323         phys_addr = virt_to_bus((void *)page);
1324         phys_addrl = SLIC_GET_ADDR_LOW(phys_addr);
1325         phys_addrh = SLIC_GET_ADDR_HIGH(phys_addr);
1326
1327         prev = NULL;
1328         tail = cmd;
1329         while ((cmdcnt < SLIC_CMDQ_CMDSINPAGE) &&
1330                (adapter->slic_handle_ix < 256)) {
1331                 /* Allocate and initialize a SLIC_HANDLE for this command */
1332                 spin_lock_irqsave(&adapter->handle_lock, flags);
1333                 pslic_handle  =  adapter->pfree_slic_handles;
1334                 adapter->pfree_slic_handles = pslic_handle->next;
1335                 spin_unlock_irqrestore(&adapter->handle_lock, flags);
1336                 pslic_handle->type = SLIC_HANDLE_CMD;
1337                 pslic_handle->address = (void *)cmd;
1338                 pslic_handle->offset = (ushort)adapter->slic_handle_ix++;
1339                 pslic_handle->other_handle = NULL;
1340                 pslic_handle->next = NULL;
1341
1342                 cmd->pslic_handle = pslic_handle;
1343                 cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
1344                 cmd->busy = false;
1345                 cmd->paddrl = phys_addrl;
1346                 cmd->paddrh = phys_addrh;
1347                 cmd->next_all = prev;
1348                 cmd->next = prev;
1349                 prev = cmd;
1350                 phys_addrl += SLIC_HOSTCMD_SIZE;
1351                 cmdaddr += SLIC_HOSTCMD_SIZE;
1352
1353                 cmd = cmdaddr;
1354                 cmdcnt++;
1355         }
1356
1357         cmdq = &adapter->cmdq_all;
1358         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1359         tail->next_all = cmdq->head;
1360         cmdq->head = prev;
1361         cmdq = &adapter->cmdq_free;
1362         spin_lock_irqsave(&cmdq->lock, flags);
1363         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1364         tail->next = cmdq->head;
1365         cmdq->head = prev;
1366         spin_unlock_irqrestore(&cmdq->lock, flags);
1367 }
1368
1369 static int slic_cmdq_init(struct adapter *adapter)
1370 {
1371         int i;
1372         u32 *pageaddr;
1373
1374         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1375         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1376         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1377         spin_lock_init(&adapter->cmdq_all.lock);
1378         spin_lock_init(&adapter->cmdq_free.lock);
1379         spin_lock_init(&adapter->cmdq_done.lock);
1380         memset(&adapter->cmdqmem, 0, sizeof(struct slic_cmdqmem));
1381         adapter->slic_handle_ix = 1;
1382         for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
1383                 pageaddr = slic_cmdqmem_addpage(adapter);
1384                 if (!pageaddr) {
1385                         slic_cmdq_free(adapter);
1386                         return -ENOMEM;
1387                 }
1388                 slic_cmdq_addcmdpage(adapter, pageaddr);
1389         }
1390         adapter->slic_handle_ix = 1;
1391
1392         return 0;
1393 }
1394
1395 static void slic_cmdq_reset(struct adapter *adapter)
1396 {
1397         struct slic_hostcmd *hcmd;
1398         struct sk_buff *skb;
1399         u32 outstanding;
1400         unsigned long flags;
1401
1402         spin_lock_irqsave(&adapter->cmdq_free.lock, flags);
1403         spin_lock(&adapter->cmdq_done.lock);
1404         outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
1405         outstanding -= adapter->cmdq_free.count;
1406         hcmd = adapter->cmdq_all.head;
1407         while (hcmd) {
1408                 if (hcmd->busy) {
1409                         skb = hcmd->skb;
1410                         hcmd->busy = 0;
1411                         hcmd->skb = NULL;
1412                         dev_kfree_skb_irq(skb);
1413                 }
1414                 hcmd = hcmd->next_all;
1415         }
1416         adapter->cmdq_free.count = 0;
1417         adapter->cmdq_free.head = NULL;
1418         adapter->cmdq_free.tail = NULL;
1419         adapter->cmdq_done.count = 0;
1420         adapter->cmdq_done.head = NULL;
1421         adapter->cmdq_done.tail = NULL;
1422         adapter->cmdq_free.head = adapter->cmdq_all.head;
1423         hcmd = adapter->cmdq_all.head;
1424         while (hcmd) {
1425                 adapter->cmdq_free.count++;
1426                 hcmd->next = hcmd->next_all;
1427                 hcmd = hcmd->next_all;
1428         }
1429         if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
1430                 dev_err(&adapter->netdev->dev,
1431                         "free_count %d != all count %d\n",
1432                         adapter->cmdq_free.count, adapter->cmdq_all.count);
1433         }
1434         spin_unlock(&adapter->cmdq_done.lock);
1435         spin_unlock_irqrestore(&adapter->cmdq_free.lock, flags);
1436 }
1437
1438 static void slic_cmdq_getdone(struct adapter *adapter)
1439 {
1440         struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
1441         struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
1442         unsigned long flags;
1443
1444         spin_lock_irqsave(&done_cmdq->lock, flags);
1445
1446         free_cmdq->head = done_cmdq->head;
1447         free_cmdq->count = done_cmdq->count;
1448         done_cmdq->head = NULL;
1449         done_cmdq->tail = NULL;
1450         done_cmdq->count = 0;
1451         spin_unlock_irqrestore(&done_cmdq->lock, flags);
1452 }
1453
1454 static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter)
1455 {
1456         struct slic_cmdqueue *cmdq = &adapter->cmdq_free;
1457         struct slic_hostcmd *cmd = NULL;
1458         unsigned long flags;
1459
1460 lock_and_retry:
1461         spin_lock_irqsave(&cmdq->lock, flags);
1462 retry:
1463         cmd = cmdq->head;
1464         if (cmd) {
1465                 cmdq->head = cmd->next;
1466                 cmdq->count--;
1467                 spin_unlock_irqrestore(&cmdq->lock, flags);
1468         } else {
1469                 slic_cmdq_getdone(adapter);
1470                 cmd = cmdq->head;
1471                 if (cmd) {
1472                         goto retry;
1473                 } else {
1474                         u32 *pageaddr;
1475
1476                         spin_unlock_irqrestore(&cmdq->lock, flags);
1477                         pageaddr = slic_cmdqmem_addpage(adapter);
1478                         if (pageaddr) {
1479                                 slic_cmdq_addcmdpage(adapter, pageaddr);
1480                                 goto lock_and_retry;
1481                         }
1482                 }
1483         }
1484         return cmd;
1485 }
1486
1487 static void slic_cmdq_putdone_irq(struct adapter *adapter,
1488                                 struct slic_hostcmd *cmd)
1489 {
1490         struct slic_cmdqueue *cmdq = &adapter->cmdq_done;
1491
1492         spin_lock(&cmdq->lock);
1493         cmd->busy = 0;
1494         cmd->next = cmdq->head;
1495         cmdq->head = cmd;
1496         cmdq->count++;
1497         if ((adapter->xmitq_full) && (cmdq->count > 10))
1498                 netif_wake_queue(adapter->netdev);
1499         spin_unlock(&cmdq->lock);
1500 }
1501
1502 static int slic_rcvqueue_fill(struct adapter *adapter)
1503 {
1504         void *paddr;
1505         u32 paddrl;
1506         u32 paddrh;
1507         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1508         int i = 0;
1509         struct device *dev = &adapter->netdev->dev;
1510
1511         while (i < SLIC_RCVQ_FILLENTRIES) {
1512                 struct slic_rcvbuf *rcvbuf;
1513                 struct sk_buff *skb;
1514 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1515 retry_rcvqfill:
1516 #endif
1517                 skb = alloc_skb(SLIC_RCVQ_RCVBUFSIZE, GFP_ATOMIC);
1518                 if (skb) {
1519                         paddr = (void *)(unsigned long)
1520                                 pci_map_single(adapter->pcidev,
1521                                                skb->data,
1522                                                SLIC_RCVQ_RCVBUFSIZE,
1523                                                PCI_DMA_FROMDEVICE);
1524                         paddrl = SLIC_GET_ADDR_LOW(paddr);
1525                         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1526
1527                         skb->len = SLIC_RCVBUF_HEADSIZE;
1528                         rcvbuf = (struct slic_rcvbuf *)skb->head;
1529                         rcvbuf->status = 0;
1530                         skb->next = NULL;
1531 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1532                         if (paddrl == 0) {
1533                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1534                                         __func__);
1535                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1536                                 dev_err(dev, "         skbdata[%p]\n",
1537                                                 skb->data);
1538                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1539                                 dev_err(dev, "         paddr[%p]\n", paddr);
1540                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1541                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1542                                 dev_err(dev, "         rcvq->head[%p]\n",
1543                                                 rcvq->head);
1544                                 dev_err(dev, "         rcvq->tail[%p]\n",
1545                                                 rcvq->tail);
1546                                 dev_err(dev, "         rcvq->count[%x]\n",
1547                                                 rcvq->count);
1548                                 dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
1549                                 goto retry_rcvqfill;
1550                         }
1551 #else
1552                         if (paddrl == 0) {
1553                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1554                                         __func__);
1555                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1556                                 dev_err(dev, "         skbdata[%p]\n",
1557                                                 skb->data);
1558                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1559                                 dev_err(dev, "         paddr[%p]\n", paddr);
1560                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1561                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1562                                 dev_err(dev, "         rcvq->head[%p]\n",
1563                                                 rcvq->head);
1564                                 dev_err(dev, "         rcvq->tail[%p]\n",
1565                                                 rcvq->tail);
1566                                 dev_err(dev, "         rcvq->count[%x]\n",
1567                                                 rcvq->count);
1568                                 dev_err(dev, "GIVE TO CARD ANYWAY\n");
1569                         }
1570 #endif
1571                         if (paddrh == 0) {
1572                                 slic_reg32_write(&adapter->slic_regs->slic_hbar,
1573                                                  (u32)paddrl, DONT_FLUSH);
1574                         } else {
1575                                 slic_reg64_write(adapter,
1576                                         &adapter->slic_regs->slic_hbar64,
1577                                         paddrl,
1578                                         &adapter->slic_regs->slic_addr_upper,
1579                                         paddrh, DONT_FLUSH);
1580                         }
1581                         if (rcvq->head)
1582                                 rcvq->tail->next = skb;
1583                         else
1584                                 rcvq->head = skb;
1585                         rcvq->tail = skb;
1586                         rcvq->count++;
1587                         i++;
1588                 } else {
1589                         dev_err(&adapter->netdev->dev,
1590                                 "slic_rcvqueue_fill could only get [%d] skbuffs\n",
1591                                 i);
1592                         break;
1593                 }
1594         }
1595         return i;
1596 }
1597
1598 static void slic_rcvqueue_free(struct adapter *adapter)
1599 {
1600         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1601         struct sk_buff *skb;
1602
1603         while (rcvq->head) {
1604                 skb = rcvq->head;
1605                 rcvq->head = rcvq->head->next;
1606                 dev_kfree_skb(skb);
1607         }
1608         rcvq->tail = NULL;
1609         rcvq->head = NULL;
1610         rcvq->count = 0;
1611 }
1612
1613 static int slic_rcvqueue_init(struct adapter *adapter)
1614 {
1615         int i, count;
1616         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1617
1618         rcvq->tail = NULL;
1619         rcvq->head = NULL;
1620         rcvq->size = SLIC_RCVQ_ENTRIES;
1621         rcvq->errors = 0;
1622         rcvq->count = 0;
1623         i = SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES;
1624         count = 0;
1625         while (i) {
1626                 count += slic_rcvqueue_fill(adapter);
1627                 i--;
1628         }
1629         if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
1630                 slic_rcvqueue_free(adapter);
1631                 return -ENOMEM;
1632         }
1633         return 0;
1634 }
1635
1636 static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
1637 {
1638         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1639         struct sk_buff *skb;
1640         struct slic_rcvbuf *rcvbuf;
1641         int count;
1642
1643         if (rcvq->count) {
1644                 skb = rcvq->head;
1645                 rcvbuf = (struct slic_rcvbuf *)skb->head;
1646
1647                 if (rcvbuf->status & IRHDDR_SVALID) {
1648                         rcvq->head = rcvq->head->next;
1649                         skb->next = NULL;
1650                         rcvq->count--;
1651                 } else {
1652                         skb = NULL;
1653                 }
1654         } else {
1655                 dev_err(&adapter->netdev->dev,
1656                         "RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
1657                 skb = NULL;
1658         }
1659         while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
1660                 count = slic_rcvqueue_fill(adapter);
1661                 if (!count)
1662                         break;
1663         }
1664         if (skb)
1665                 rcvq->errors = 0;
1666         return skb;
1667 }
1668
1669 static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
1670 {
1671         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1672         void *paddr;
1673         u32 paddrl;
1674         u32 paddrh;
1675         struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
1676         struct device *dev;
1677
1678         paddr = (void *)(unsigned long)
1679                 pci_map_single(adapter->pcidev, skb->head,
1680                                SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
1681         rcvbuf->status = 0;
1682         skb->next = NULL;
1683
1684         paddrl = SLIC_GET_ADDR_LOW(paddr);
1685         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1686
1687         if (paddrl == 0) {
1688                 dev = &adapter->netdev->dev;
1689                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1690                         __func__);
1691                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1692                 dev_err(dev, "         skbdata[%p]\n", skb->data);
1693                 dev_err(dev, "         skblen[%x]\n", skb->len);
1694                 dev_err(dev, "         paddr[%p]\n", paddr);
1695                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1696                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1697                 dev_err(dev, "         rcvq->head[%p]\n", rcvq->head);
1698                 dev_err(dev, "         rcvq->tail[%p]\n", rcvq->tail);
1699                 dev_err(dev, "         rcvq->count[%x]\n", rcvq->count);
1700         }
1701         if (paddrh == 0) {
1702                 slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
1703                                  DONT_FLUSH);
1704         } else {
1705                 slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
1706                                  paddrl, &adapter->slic_regs->slic_addr_upper,
1707                                  paddrh, DONT_FLUSH);
1708         }
1709         if (rcvq->head)
1710                 rcvq->tail->next = skb;
1711         else
1712                 rcvq->head = skb;
1713         rcvq->tail = skb;
1714         rcvq->count++;
1715         return rcvq->count;
1716 }
1717
1718 /*
1719  * slic_link_event_handler -
1720  *
1721  * Initiate a link configuration sequence.  The link configuration begins
1722  * by issuing a READ_LINK_STATUS command to the Utility Processor on the
1723  * SLIC.  Since the command finishes asynchronously, the slic_upr_comlete
1724  * routine will follow it up witha UP configuration write command, which
1725  * will also complete asynchronously.
1726  *
1727  */
1728 static int slic_link_event_handler(struct adapter *adapter)
1729 {
1730         int status;
1731         struct slic_shmem *pshmem;
1732
1733         if (adapter->state != ADAPT_UP) {
1734                 /* Adapter is not operational.  Ignore.  */
1735                 return -ENODEV;
1736         }
1737
1738         pshmem = (struct slic_shmem *)(unsigned long)adapter->phys_shmem;
1739
1740 #if BITS_PER_LONG == 64
1741         status = slic_upr_request(adapter,
1742                                   SLIC_UPR_RLSR,
1743                                   SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
1744                                   SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
1745                                   0, 0);
1746 #else
1747         status = slic_upr_request(adapter, SLIC_UPR_RLSR,
1748                 (u32)&pshmem->linkstatus,       /* no 4GB wrap guaranteed */
1749                                   0, 0, 0);
1750 #endif
1751         return status;
1752 }
1753
1754 static void slic_init_cleanup(struct adapter *adapter)
1755 {
1756         if (adapter->intrregistered) {
1757                 adapter->intrregistered = 0;
1758                 free_irq(adapter->netdev->irq, adapter->netdev);
1759         }
1760         if (adapter->pshmem) {
1761                 pci_free_consistent(adapter->pcidev,
1762                                     sizeof(struct slic_shmem),
1763                                     adapter->pshmem, adapter->phys_shmem);
1764                 adapter->pshmem = NULL;
1765                 adapter->phys_shmem = (dma_addr_t)(unsigned long)NULL;
1766         }
1767
1768         if (adapter->pingtimerset) {
1769                 adapter->pingtimerset = 0;
1770                 del_timer(&adapter->pingtimer);
1771         }
1772
1773         slic_rspqueue_free(adapter);
1774         slic_cmdq_free(adapter);
1775         slic_rcvqueue_free(adapter);
1776 }
1777
1778 /*
1779  *  Allocate a mcast_address structure to hold the multicast address.
1780  *  Link it in.
1781  */
1782 static int slic_mcast_add_list(struct adapter *adapter, char *address)
1783 {
1784         struct mcast_address *mcaddr, *mlist;
1785
1786         /* Check to see if it already exists */
1787         mlist = adapter->mcastaddrs;
1788         while (mlist) {
1789                 if (ether_addr_equal(mlist->address, address))
1790                         return 0;
1791                 mlist = mlist->next;
1792         }
1793
1794         /* Doesn't already exist.  Allocate a structure to hold it */
1795         mcaddr = kmalloc(sizeof(*mcaddr), GFP_ATOMIC);
1796         if (!mcaddr)
1797                 return 1;
1798
1799         ether_addr_copy(mcaddr->address, address);
1800
1801         mcaddr->next = adapter->mcastaddrs;
1802         adapter->mcastaddrs = mcaddr;
1803
1804         return 0;
1805 }
1806
1807 static void slic_mcast_set_list(struct net_device *dev)
1808 {
1809         struct adapter *adapter = netdev_priv(dev);
1810         int status = 0;
1811         char *addresses;
1812         struct netdev_hw_addr *ha;
1813
1814         netdev_for_each_mc_addr(ha, dev) {
1815                 addresses = (char *)&ha->addr;
1816                 status = slic_mcast_add_list(adapter, addresses);
1817                 if (status != 0)
1818                         break;
1819                 slic_mcast_set_bit(adapter, addresses);
1820         }
1821
1822         if (adapter->devflags_prev != dev->flags) {
1823                 adapter->macopts = MAC_DIRECTED;
1824                 if (dev->flags) {
1825                         if (dev->flags & IFF_BROADCAST)
1826                                 adapter->macopts |= MAC_BCAST;
1827                         if (dev->flags & IFF_PROMISC)
1828                                 adapter->macopts |= MAC_PROMISC;
1829                         if (dev->flags & IFF_ALLMULTI)
1830                                 adapter->macopts |= MAC_ALLMCAST;
1831                         if (dev->flags & IFF_MULTICAST)
1832                                 adapter->macopts |= MAC_MCAST;
1833                 }
1834                 adapter->devflags_prev = dev->flags;
1835                 slic_config_set(adapter, true);
1836         } else {
1837                 if (status == 0)
1838                         slic_mcast_set_mask(adapter);
1839         }
1840 }
1841
1842 #define  XMIT_FAIL_LINK_STATE               1
1843 #define  XMIT_FAIL_ZERO_LENGTH              2
1844 #define  XMIT_FAIL_HOSTCMD_FAIL             3
1845
1846 static void slic_xmit_build_request(struct adapter *adapter,
1847                              struct slic_hostcmd *hcmd, struct sk_buff *skb)
1848 {
1849         struct slic_host64_cmd *ihcmd;
1850         ulong phys_addr;
1851
1852         ihcmd = &hcmd->cmd64;
1853
1854         ihcmd->flags = adapter->port << IHFLG_IFSHFT;
1855         ihcmd->command = IHCMD_XMT_REQ;
1856         ihcmd->u.slic_buffers.totlen = skb->len;
1857         phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
1858                         PCI_DMA_TODEVICE);
1859         if (pci_dma_mapping_error(adapter->pcidev, phys_addr)) {
1860                 kfree_skb(skb);
1861                 dev_err(&adapter->pcidev->dev, "DMA mapping error\n");
1862                 return;
1863         }
1864         ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
1865         ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
1866         ihcmd->u.slic_buffers.bufs[0].length = skb->len;
1867 #if BITS_PER_LONG == 64
1868         hcmd->cmdsize = (u32)((((u64)&ihcmd->u.slic_buffers.bufs[1] -
1869                                      (u64)hcmd) + 31) >> 5);
1870 #else
1871         hcmd->cmdsize = (((u32)&ihcmd->u.slic_buffers.bufs[1] -
1872                                        (u32)hcmd) + 31) >> 5;
1873 #endif
1874 }
1875
1876 static void slic_xmit_fail(struct adapter *adapter,
1877                     struct sk_buff *skb,
1878                     void *cmd, u32 skbtype, u32 status)
1879 {
1880         if (adapter->xmitq_full)
1881                 netif_stop_queue(adapter->netdev);
1882         if ((!cmd) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
1883                 switch (status) {
1884                 case XMIT_FAIL_LINK_STATE:
1885                         dev_err(&adapter->netdev->dev,
1886                                 "reject xmit skb[%p: %x] linkstate[%s] adapter[%s:%d] card[%s:%d]\n",
1887                                 skb, skb->pkt_type,
1888                                 SLIC_LINKSTATE(adapter->linkstate),
1889                                 SLIC_ADAPTER_STATE(adapter->state),
1890                                 adapter->state,
1891                                 SLIC_CARD_STATE(adapter->card->state),
1892                                 adapter->card->state);
1893                         break;
1894                 case XMIT_FAIL_ZERO_LENGTH:
1895                         dev_err(&adapter->netdev->dev,
1896                                 "xmit_start skb->len == 0 skb[%p] type[%x]\n",
1897                                 skb, skb->pkt_type);
1898                         break;
1899                 case XMIT_FAIL_HOSTCMD_FAIL:
1900                         dev_err(&adapter->netdev->dev,
1901                                 "xmit_start skb[%p] type[%x] No host commands available\n",
1902                                 skb, skb->pkt_type);
1903                         break;
1904                 }
1905         }
1906         dev_kfree_skb(skb);
1907         adapter->netdev->stats.tx_dropped++;
1908 }
1909
1910 static void slic_rcv_handle_error(struct adapter *adapter,
1911                                         struct slic_rcvbuf *rcvbuf)
1912 {
1913         struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
1914         struct net_device *netdev = adapter->netdev;
1915
1916         if (adapter->devid != SLIC_1GB_DEVICE_ID) {
1917                 if (hdr->frame_status14 & VRHSTAT_802OE)
1918                         adapter->if_events.oflow802++;
1919                 if (hdr->frame_status14 & VRHSTAT_TPOFLO)
1920                         adapter->if_events.Tprtoflow++;
1921                 if (hdr->frame_status_b14 & VRHSTATB_802UE)
1922                         adapter->if_events.uflow802++;
1923                 if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
1924                         adapter->if_events.rcvearly++;
1925                         netdev->stats.rx_fifo_errors++;
1926                 }
1927                 if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
1928                         adapter->if_events.Bufov++;
1929                         netdev->stats.rx_over_errors++;
1930                 }
1931                 if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
1932                         adapter->if_events.Carre++;
1933                         netdev->stats.tx_carrier_errors++;
1934                 }
1935                 if (hdr->frame_status_b14 & VRHSTATB_LONGE)
1936                         adapter->if_events.Longe++;
1937                 if (hdr->frame_status_b14 & VRHSTATB_PREA)
1938                         adapter->if_events.Invp++;
1939                 if (hdr->frame_status_b14 & VRHSTATB_CRC) {
1940                         adapter->if_events.Crc++;
1941                         netdev->stats.rx_crc_errors++;
1942                 }
1943                 if (hdr->frame_status_b14 & VRHSTATB_DRBL)
1944                         adapter->if_events.Drbl++;
1945                 if (hdr->frame_status_b14 & VRHSTATB_CODE)
1946                         adapter->if_events.Code++;
1947                 if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
1948                         adapter->if_events.TpCsum++;
1949                 if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
1950                         adapter->if_events.TpHlen++;
1951                 if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
1952                         adapter->if_events.IpCsum++;
1953                 if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
1954                         adapter->if_events.IpLen++;
1955                 if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
1956                         adapter->if_events.IpHlen++;
1957         } else {
1958                 if (hdr->frame_statusGB & VGBSTAT_XPERR) {
1959                         u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
1960
1961                         if (xerr == VGBSTAT_XCSERR)
1962                                 adapter->if_events.TpCsum++;
1963                         if (xerr == VGBSTAT_XUFLOW)
1964                                 adapter->if_events.Tprtoflow++;
1965                         if (xerr == VGBSTAT_XHLEN)
1966                                 adapter->if_events.TpHlen++;
1967                 }
1968                 if (hdr->frame_statusGB & VGBSTAT_NETERR) {
1969                         u32 nerr =
1970                             (hdr->
1971                              frame_statusGB >> VGBSTAT_NERRSHFT) &
1972                             VGBSTAT_NERRMSK;
1973                         if (nerr == VGBSTAT_NCSERR)
1974                                 adapter->if_events.IpCsum++;
1975                         if (nerr == VGBSTAT_NUFLOW)
1976                                 adapter->if_events.IpLen++;
1977                         if (nerr == VGBSTAT_NHLEN)
1978                                 adapter->if_events.IpHlen++;
1979                 }
1980                 if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
1981                         u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
1982
1983                         if (lerr == VGBSTAT_LDEARLY)
1984                                 adapter->if_events.rcvearly++;
1985                         if (lerr == VGBSTAT_LBOFLO)
1986                                 adapter->if_events.Bufov++;
1987                         if (lerr == VGBSTAT_LCODERR)
1988                                 adapter->if_events.Code++;
1989                         if (lerr == VGBSTAT_LDBLNBL)
1990                                 adapter->if_events.Drbl++;
1991                         if (lerr == VGBSTAT_LCRCERR)
1992                                 adapter->if_events.Crc++;
1993                         if (lerr == VGBSTAT_LOFLO)
1994                                 adapter->if_events.oflow802++;
1995                         if (lerr == VGBSTAT_LUFLO)
1996                                 adapter->if_events.uflow802++;
1997                 }
1998         }
1999 }
2000
2001 #define TCP_OFFLOAD_FRAME_PUSHFLAG  0x10000000
2002 #define M_FAST_PATH                 0x0040
2003
2004 static void slic_rcv_handler(struct adapter *adapter)
2005 {
2006         struct net_device *netdev = adapter->netdev;
2007         struct sk_buff *skb;
2008         struct slic_rcvbuf *rcvbuf;
2009         u32 frames = 0;
2010
2011         while ((skb = slic_rcvqueue_getnext(adapter))) {
2012                 u32 rx_bytes;
2013
2014                 rcvbuf = (struct slic_rcvbuf *)skb->head;
2015                 adapter->card->events++;
2016                 if (rcvbuf->status & IRHDDR_ERR) {
2017                         adapter->rx_errors++;
2018                         slic_rcv_handle_error(adapter, rcvbuf);
2019                         slic_rcvqueue_reinsert(adapter, skb);
2020                         continue;
2021                 }
2022
2023                 if (!slic_mac_filter(adapter, (struct ether_header *)
2024                                         rcvbuf->data)) {
2025                         slic_rcvqueue_reinsert(adapter, skb);
2026                         continue;
2027                 }
2028                 skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
2029                 rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
2030                 skb_put(skb, rx_bytes);
2031                 netdev->stats.rx_packets++;
2032                 netdev->stats.rx_bytes += rx_bytes;
2033 #if SLIC_OFFLOAD_IP_CHECKSUM
2034                 skb->ip_summed = CHECKSUM_UNNECESSARY;
2035 #endif
2036
2037                 skb->dev = adapter->netdev;
2038                 skb->protocol = eth_type_trans(skb, skb->dev);
2039                 netif_rx(skb);
2040
2041                 ++frames;
2042 #if SLIC_INTERRUPT_PROCESS_LIMIT
2043                 if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
2044                         adapter->rcv_interrupt_yields++;
2045                         break;
2046                 }
2047 #endif
2048         }
2049         adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
2050 }
2051
2052 static void slic_xmit_complete(struct adapter *adapter)
2053 {
2054         struct slic_hostcmd *hcmd;
2055         struct slic_rspbuf *rspbuf;
2056         u32 frames = 0;
2057         struct slic_handle_word slic_handle_word;
2058
2059         do {
2060                 rspbuf = slic_rspqueue_getnext(adapter);
2061                 if (!rspbuf)
2062                         break;
2063                 adapter->xmit_completes++;
2064                 adapter->card->events++;
2065                 /*
2066                  * Get the complete host command buffer
2067                  */
2068                 slic_handle_word.handle_token = rspbuf->hosthandle;
2069                 hcmd =
2070                         adapter->slic_handles[slic_handle_word.handle_index].
2071                                                                         address;
2072 /*      hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
2073                 if (hcmd->type == SLIC_CMD_DUMB) {
2074                         if (hcmd->skb)
2075                                 dev_kfree_skb_irq(hcmd->skb);
2076                         slic_cmdq_putdone_irq(adapter, hcmd);
2077                 }
2078                 rspbuf->status = 0;
2079                 rspbuf->hosthandle = 0;
2080                 frames++;
2081         } while (1);
2082         adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
2083 }
2084
2085 static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
2086                         struct net_device *dev)
2087 {
2088         if (isr & ~ISR_IO) {
2089                 if (isr & ISR_ERR) {
2090                         adapter->error_interrupts++;
2091                         if (isr & ISR_RMISS) {
2092                                 int count;
2093                                 int pre_count;
2094                                 int errors;
2095
2096                                 struct slic_rcvqueue *rcvq =
2097                                         &adapter->rcvqueue;
2098
2099                                 adapter->error_rmiss_interrupts++;
2100
2101                                 if (!rcvq->errors)
2102                                         rcv_count = rcvq->count;
2103                                 pre_count = rcvq->count;
2104                                 errors = rcvq->errors;
2105
2106                                 while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
2107                                         count = slic_rcvqueue_fill(adapter);
2108                                         if (!count)
2109                                                 break;
2110                                 }
2111                         } else if (isr & ISR_XDROP) {
2112                                 dev_err(&dev->dev,
2113                                                 "isr & ISR_ERR [%x] ISR_XDROP\n",
2114                                                 isr);
2115                         } else {
2116                                 dev_err(&dev->dev,
2117                                                 "isr & ISR_ERR [%x]\n",
2118                                                 isr);
2119                         }
2120                 }
2121
2122                 if (isr & ISR_LEVENT) {
2123                         adapter->linkevent_interrupts++;
2124                         if (slic_link_event_handler(adapter))
2125                                 adapter->linkevent_interrupts--;
2126                 }
2127
2128                 if ((isr & ISR_UPC) || (isr & ISR_UPCERR) ||
2129                     (isr & ISR_UPCBSY)) {
2130                         adapter->upr_interrupts++;
2131                         slic_upr_request_complete(adapter, isr);
2132                 }
2133         }
2134
2135         if (isr & ISR_RCV) {
2136                 adapter->rcv_interrupts++;
2137                 slic_rcv_handler(adapter);
2138         }
2139
2140         if (isr & ISR_CMD) {
2141                 adapter->xmit_interrupts++;
2142                 slic_xmit_complete(adapter);
2143         }
2144 }
2145
2146 static irqreturn_t slic_interrupt(int irq, void *dev_id)
2147 {
2148         struct net_device *dev = dev_id;
2149         struct adapter *adapter = netdev_priv(dev);
2150         u32 isr;
2151
2152         if ((adapter->pshmem) && (adapter->pshmem->isr)) {
2153                 slic_reg32_write(&adapter->slic_regs->slic_icr,
2154                                  ICR_INT_MASK, FLUSH);
2155                 isr = adapter->isrcopy = adapter->pshmem->isr;
2156                 adapter->pshmem->isr = 0;
2157                 adapter->num_isrs++;
2158                 switch (adapter->card->state) {
2159                 case CARD_UP:
2160                         slic_interrupt_card_up(isr, adapter, dev);
2161                         break;
2162
2163                 case CARD_DOWN:
2164                         if ((isr & ISR_UPC) ||
2165                             (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
2166                                 adapter->upr_interrupts++;
2167                                 slic_upr_request_complete(adapter, isr);
2168                         }
2169                         break;
2170                 }
2171
2172                 adapter->isrcopy = 0;
2173                 adapter->all_reg_writes += 2;
2174                 adapter->isr_reg_writes++;
2175                 slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
2176         } else {
2177                 adapter->false_interrupts++;
2178         }
2179         return IRQ_HANDLED;
2180 }
2181
2182 #define NORMAL_ETHFRAME     0
2183
2184 static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
2185 {
2186         struct sliccard *card;
2187         struct adapter *adapter = netdev_priv(dev);
2188         struct slic_hostcmd *hcmd = NULL;
2189         u32 status = 0;
2190         void *offloadcmd = NULL;
2191
2192         card = adapter->card;
2193         if ((adapter->linkstate != LINK_UP) ||
2194             (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
2195                 status = XMIT_FAIL_LINK_STATE;
2196                 goto xmit_fail;
2197
2198         } else if (skb->len == 0) {
2199                 status = XMIT_FAIL_ZERO_LENGTH;
2200                 goto xmit_fail;
2201         }
2202
2203         hcmd = slic_cmdq_getfree(adapter);
2204         if (!hcmd) {
2205                 adapter->xmitq_full = 1;
2206                 status = XMIT_FAIL_HOSTCMD_FAIL;
2207                 goto xmit_fail;
2208         }
2209         hcmd->skb = skb;
2210         hcmd->busy = 1;
2211         hcmd->type = SLIC_CMD_DUMB;
2212         slic_xmit_build_request(adapter, hcmd, skb);
2213         dev->stats.tx_packets++;
2214         dev->stats.tx_bytes += skb->len;
2215
2216 #ifdef DEBUG_DUMP
2217         if (adapter->kill_card) {
2218                 struct slic_host64_cmd ihcmd;
2219
2220                 ihcmd = &hcmd->cmd64;
2221
2222                 ihcmd->flags |= 0x40;
2223                 adapter->kill_card = 0; /* only do this once */
2224         }
2225 #endif
2226         if (hcmd->paddrh == 0) {
2227                 slic_reg32_write(&adapter->slic_regs->slic_cbar,
2228                                  (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
2229         } else {
2230                 slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
2231                                  (hcmd->paddrl | hcmd->cmdsize),
2232                                  &adapter->slic_regs->slic_addr_upper,
2233                                  hcmd->paddrh, DONT_FLUSH);
2234         }
2235 xmit_done:
2236         return NETDEV_TX_OK;
2237 xmit_fail:
2238         slic_xmit_fail(adapter, skb, offloadcmd, NORMAL_ETHFRAME, status);
2239         goto xmit_done;
2240 }
2241
2242 static void slic_adapter_freeresources(struct adapter *adapter)
2243 {
2244         slic_init_cleanup(adapter);
2245         adapter->error_interrupts = 0;
2246         adapter->rcv_interrupts = 0;
2247         adapter->xmit_interrupts = 0;
2248         adapter->linkevent_interrupts = 0;
2249         adapter->upr_interrupts = 0;
2250         adapter->num_isrs = 0;
2251         adapter->xmit_completes = 0;
2252         adapter->rcv_broadcasts = 0;
2253         adapter->rcv_multicasts = 0;
2254         adapter->rcv_unicasts = 0;
2255 }
2256
2257 static int slic_adapter_allocresources(struct adapter *adapter,
2258                                        unsigned long *flags)
2259 {
2260         if (!adapter->intrregistered) {
2261                 int retval;
2262
2263                 spin_unlock_irqrestore(&slic_global.driver_lock, *flags);
2264
2265                 retval = request_irq(adapter->netdev->irq,
2266                                      &slic_interrupt,
2267                                      IRQF_SHARED,
2268                                      adapter->netdev->name, adapter->netdev);
2269
2270                 spin_lock_irqsave(&slic_global.driver_lock, *flags);
2271
2272                 if (retval) {
2273                         dev_err(&adapter->netdev->dev,
2274                                 "request_irq (%s) FAILED [%x]\n",
2275                                 adapter->netdev->name, retval);
2276                         return retval;
2277                 }
2278                 adapter->intrregistered = 1;
2279         }
2280         return 0;
2281 }
2282
2283 /*
2284  *  slic_if_init
2285  *
2286  *  Perform initialization of our slic interface.
2287  *
2288  */
2289 static int slic_if_init(struct adapter *adapter, unsigned long *flags)
2290 {
2291         struct sliccard *card = adapter->card;
2292         struct net_device *dev = adapter->netdev;
2293         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2294         struct slic_shmem *pshmem;
2295         int rc;
2296
2297         /* adapter should be down at this point */
2298         if (adapter->state != ADAPT_DOWN) {
2299                 dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
2300                         __func__);
2301                 rc = -EIO;
2302                 goto err;
2303         }
2304
2305         adapter->devflags_prev = dev->flags;
2306         adapter->macopts = MAC_DIRECTED;
2307         if (dev->flags) {
2308                 if (dev->flags & IFF_BROADCAST)
2309                         adapter->macopts |= MAC_BCAST;
2310                 if (dev->flags & IFF_PROMISC)
2311                         adapter->macopts |= MAC_PROMISC;
2312                 if (dev->flags & IFF_ALLMULTI)
2313                         adapter->macopts |= MAC_ALLMCAST;
2314                 if (dev->flags & IFF_MULTICAST)
2315                         adapter->macopts |= MAC_MCAST;
2316         }
2317         rc = slic_adapter_allocresources(adapter, flags);
2318         if (rc) {
2319                 dev_err(&dev->dev, "slic_adapter_allocresources FAILED %x\n",
2320                         rc);
2321                 slic_adapter_freeresources(adapter);
2322                 goto err;
2323         }
2324
2325         if (!adapter->queues_initialized) {
2326                 rc = slic_rspqueue_init(adapter);
2327                 if (rc)
2328                         goto err;
2329                 rc = slic_cmdq_init(adapter);
2330                 if (rc)
2331                         goto err;
2332                 rc = slic_rcvqueue_init(adapter);
2333                 if (rc)
2334                         goto err;
2335                 adapter->queues_initialized = 1;
2336         }
2337
2338         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2339         mdelay(1);
2340
2341         if (!adapter->isp_initialized) {
2342                 unsigned long flags;
2343
2344                 pshmem = (struct slic_shmem *)(unsigned long)
2345                          adapter->phys_shmem;
2346
2347                 spin_lock_irqsave(&adapter->bit64reglock, flags);
2348
2349 #if BITS_PER_LONG == 64
2350                 slic_reg32_write(&slic_regs->slic_addr_upper,
2351                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2352                 slic_reg32_write(&slic_regs->slic_isp,
2353                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2354 #else
2355                 slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
2356                 slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr,
2357                                 FLUSH);
2358 #endif
2359                 spin_unlock_irqrestore(&adapter->bit64reglock, flags);
2360                 adapter->isp_initialized = 1;
2361         }
2362
2363         adapter->state = ADAPT_UP;
2364         if (!card->loadtimerset) {
2365                 setup_timer(&card->loadtimer, &slic_timer_load_check,
2366                             (ulong)card);
2367                 card->loadtimer.expires =
2368                     jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
2369                 add_timer(&card->loadtimer);
2370
2371                 card->loadtimerset = 1;
2372         }
2373
2374         if (!adapter->pingtimerset) {
2375                 setup_timer(&adapter->pingtimer, &slic_timer_ping, (ulong)dev);
2376                 adapter->pingtimer.expires =
2377                     jiffies + (PING_TIMER_INTERVAL * HZ);
2378                 add_timer(&adapter->pingtimer);
2379                 adapter->pingtimerset = 1;
2380                 adapter->card->pingstatus = ISR_PINGMASK;
2381         }
2382
2383         /*
2384          *    clear any pending events, then enable interrupts
2385          */
2386         adapter->isrcopy = 0;
2387         adapter->pshmem->isr = 0;
2388         slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
2389         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
2390
2391         slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
2392         rc = slic_link_event_handler(adapter);
2393         if (rc) {
2394                 /* disable interrupts then clear pending events */
2395                 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2396                 slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
2397                 if (adapter->pingtimerset) {
2398                         del_timer(&adapter->pingtimer);
2399                         adapter->pingtimerset = 0;
2400                 }
2401                 if (card->loadtimerset) {
2402                         del_timer(&card->loadtimer);
2403                         card->loadtimerset = 0;
2404                 }
2405                 adapter->state = ADAPT_DOWN;
2406                 slic_adapter_freeresources(adapter);
2407         }
2408
2409 err:
2410         return rc;
2411 }
2412
2413 static int slic_entry_open(struct net_device *dev)
2414 {
2415         struct adapter *adapter = netdev_priv(dev);
2416         struct sliccard *card = adapter->card;
2417         unsigned long flags;
2418         int status;
2419
2420         netif_stop_queue(adapter->netdev);
2421
2422         spin_lock_irqsave(&slic_global.driver_lock, flags);
2423         if (!adapter->activated) {
2424                 card->adapters_activated++;
2425                 slic_global.num_slic_ports_active++;
2426                 adapter->activated = 1;
2427         }
2428         status = slic_if_init(adapter, &flags);
2429
2430         if (status != 0) {
2431                 if (adapter->activated) {
2432                         card->adapters_activated--;
2433                         slic_global.num_slic_ports_active--;
2434                         adapter->activated = 0;
2435                 }
2436                 goto spin_unlock;
2437         }
2438         if (!card->master)
2439                 card->master = adapter;
2440
2441 spin_unlock:
2442         spin_unlock_irqrestore(&slic_global.driver_lock, flags);
2443         return status;
2444 }
2445
2446 static void slic_card_cleanup(struct sliccard *card)
2447 {
2448         if (card->loadtimerset) {
2449                 card->loadtimerset = 0;
2450                 del_timer_sync(&card->loadtimer);
2451         }
2452
2453         kfree(card);
2454 }
2455
2456 static void slic_entry_remove(struct pci_dev *pcidev)
2457 {
2458         struct net_device *dev = pci_get_drvdata(pcidev);
2459         struct adapter *adapter = netdev_priv(dev);
2460         struct sliccard *card;
2461         struct mcast_address *mcaddr, *mlist;
2462
2463         unregister_netdev(dev);
2464
2465         slic_adapter_freeresources(adapter);
2466         slic_unmap_mmio_space(adapter);
2467
2468         /* free multicast addresses */
2469         mlist = adapter->mcastaddrs;
2470         while (mlist) {
2471                 mcaddr = mlist;
2472                 mlist = mlist->next;
2473                 kfree(mcaddr);
2474         }
2475         card = adapter->card;
2476         card->adapters_allocated--;
2477         adapter->allocated = 0;
2478         if (!card->adapters_allocated) {
2479                 struct sliccard *curr_card = slic_global.slic_card;
2480
2481                 if (curr_card == card) {
2482                         slic_global.slic_card = card->next;
2483                 } else {
2484                         while (curr_card->next != card)
2485                                 curr_card = curr_card->next;
2486                         curr_card->next = card->next;
2487                 }
2488                 slic_global.num_slic_cards--;
2489                 slic_card_cleanup(card);
2490         }
2491         free_netdev(dev);
2492         pci_release_regions(pcidev);
2493         pci_disable_device(pcidev);
2494 }
2495
2496 static int slic_entry_halt(struct net_device *dev)
2497 {
2498         struct adapter *adapter = netdev_priv(dev);
2499         struct sliccard *card = adapter->card;
2500         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2501         unsigned long flags;
2502
2503         spin_lock_irqsave(&slic_global.driver_lock, flags);
2504         netif_stop_queue(adapter->netdev);
2505         adapter->state = ADAPT_DOWN;
2506         adapter->linkstate = LINK_DOWN;
2507         adapter->upr_list = NULL;
2508         adapter->upr_busy = 0;
2509         adapter->devflags_prev = 0;
2510         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2511         adapter->all_reg_writes++;
2512         adapter->icr_reg_writes++;
2513         slic_config_clear(adapter);
2514         if (adapter->activated) {
2515                 card->adapters_activated--;
2516                 slic_global.num_slic_ports_active--;
2517                 adapter->activated = 0;
2518         }
2519 #ifdef AUTOMATIC_RESET
2520         slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
2521 #endif
2522         /*
2523          *  Reset the adapter's cmd queues
2524          */
2525         slic_cmdq_reset(adapter);
2526
2527 #ifdef AUTOMATIC_RESET
2528         if (!card->adapters_activated)
2529                 slic_card_init(card, adapter);
2530 #endif
2531
2532         spin_unlock_irqrestore(&slic_global.driver_lock, flags);
2533         return 0;
2534 }
2535
2536 static struct net_device_stats *slic_get_stats(struct net_device *dev)
2537 {
2538         struct adapter *adapter = netdev_priv(dev);
2539
2540         dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
2541         dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
2542         dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
2543         dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
2544         dev->stats.tx_heartbeat_errors = 0;
2545         dev->stats.tx_aborted_errors = 0;
2546         dev->stats.tx_window_errors = 0;
2547         dev->stats.tx_fifo_errors = 0;
2548         dev->stats.rx_frame_errors = 0;
2549         dev->stats.rx_length_errors = 0;
2550
2551         return &dev->stats;
2552 }
2553
2554 static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2555 {
2556         struct adapter *adapter = netdev_priv(dev);
2557         struct ethtool_cmd edata;
2558         struct ethtool_cmd ecmd;
2559         u32 data[7];
2560         u32 intagg;
2561
2562         switch (cmd) {
2563         case SIOCSLICSETINTAGG:
2564                 if (copy_from_user(data, rq->ifr_data, 28))
2565                         return -EFAULT;
2566                 intagg = data[0];
2567                 dev_err(&dev->dev, "set interrupt aggregation to %d\n",
2568                         intagg);
2569                 slic_intagg_set(adapter, intagg);
2570                 return 0;
2571
2572         case SIOCETHTOOL:
2573                 if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
2574                         return -EFAULT;
2575
2576                 if (ecmd.cmd == ETHTOOL_GSET) {
2577                         memset(&edata, 0, sizeof(edata));
2578                         edata.supported = (SUPPORTED_10baseT_Half |
2579                                            SUPPORTED_10baseT_Full |
2580                                            SUPPORTED_100baseT_Half |
2581                                            SUPPORTED_100baseT_Full |
2582                                            SUPPORTED_Autoneg | SUPPORTED_MII);
2583                         edata.port = PORT_MII;
2584                         edata.transceiver = XCVR_INTERNAL;
2585                         edata.phy_address = 0;
2586                         if (adapter->linkspeed == LINK_100MB)
2587                                 edata.speed = SPEED_100;
2588                         else if (adapter->linkspeed == LINK_10MB)
2589                                 edata.speed = SPEED_10;
2590                         else
2591                                 edata.speed = 0;
2592
2593                         if (adapter->linkduplex == LINK_FULLD)
2594                                 edata.duplex = DUPLEX_FULL;
2595                         else
2596                                 edata.duplex = DUPLEX_HALF;
2597
2598                         edata.autoneg = AUTONEG_ENABLE;
2599                         edata.maxtxpkt = 1;
2600                         edata.maxrxpkt = 1;
2601                         if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
2602                                 return -EFAULT;
2603
2604                 } else if (ecmd.cmd == ETHTOOL_SSET) {
2605                         if (!capable(CAP_NET_ADMIN))
2606                                 return -EPERM;
2607
2608                         if (adapter->linkspeed == LINK_100MB)
2609                                 edata.speed = SPEED_100;
2610                         else if (adapter->linkspeed == LINK_10MB)
2611                                 edata.speed = SPEED_10;
2612                         else
2613                                 edata.speed = 0;
2614
2615                         if (adapter->linkduplex == LINK_FULLD)
2616                                 edata.duplex = DUPLEX_FULL;
2617                         else
2618                                 edata.duplex = DUPLEX_HALF;
2619
2620                         edata.autoneg = AUTONEG_ENABLE;
2621                         edata.maxtxpkt = 1;
2622                         edata.maxrxpkt = 1;
2623                         if ((ecmd.speed != edata.speed) ||
2624                             (ecmd.duplex != edata.duplex)) {
2625                                 u32 speed;
2626                                 u32 duplex;
2627
2628                                 if (ecmd.speed == SPEED_10)
2629                                         speed = 0;
2630                                 else
2631                                         speed = PCR_SPEED_100;
2632                                 if (ecmd.duplex == DUPLEX_FULL)
2633                                         duplex = PCR_DUPLEX_FULL;
2634                                 else
2635                                         duplex = 0;
2636                                 slic_link_config(adapter, speed, duplex);
2637                                 if (slic_link_event_handler(adapter))
2638                                         return -EFAULT;
2639                         }
2640                 }
2641                 return 0;
2642         default:
2643                 return -EOPNOTSUPP;
2644         }
2645 }
2646
2647 static void slic_config_pci(struct pci_dev *pcidev)
2648 {
2649         u16 pci_command;
2650         u16 new_command;
2651
2652         pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
2653
2654         new_command = pci_command | PCI_COMMAND_MASTER
2655             | PCI_COMMAND_MEMORY
2656             | PCI_COMMAND_INVALIDATE
2657             | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
2658         if (pci_command != new_command)
2659                 pci_write_config_word(pcidev, PCI_COMMAND, new_command);
2660 }
2661
2662 static int slic_card_init(struct sliccard *card, struct adapter *adapter)
2663 {
2664         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2665         struct slic_eeprom *peeprom;
2666         struct oslic_eeprom *pOeeprom;
2667         dma_addr_t phys_config;
2668         u32 phys_configh;
2669         u32 phys_configl;
2670         u32 i = 0;
2671         struct slic_shmem *pshmem;
2672         int status;
2673         uint macaddrs = card->card_size;
2674         ushort eecodesize;
2675         ushort dramsize;
2676         ushort ee_chksum;
2677         ushort calc_chksum;
2678         struct slic_config_mac *pmac;
2679         unsigned char fruformat;
2680         unsigned char oemfruformat;
2681         struct atk_fru *patkfru;
2682         union oemfru *poemfru;
2683         unsigned long flags;
2684
2685         /* Reset everything except PCI configuration space */
2686         slic_soft_reset(adapter);
2687
2688         /* Download the microcode */
2689         status = slic_card_download(adapter);
2690         if (status)
2691                 return status;
2692
2693         if (!card->config_set) {
2694                 peeprom = pci_alloc_consistent(adapter->pcidev,
2695                                                sizeof(struct slic_eeprom),
2696                                                &phys_config);
2697
2698                 phys_configl = SLIC_GET_ADDR_LOW(phys_config);
2699                 phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
2700
2701                 if (!peeprom) {
2702                         dev_err(&adapter->pcidev->dev,
2703                                 "Failed to allocate DMA memory for EEPROM.\n");
2704                         return -ENOMEM;
2705                 }
2706
2707                 memset(peeprom, 0, sizeof(struct slic_eeprom));
2708
2709                 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2710                 mdelay(1);
2711                 pshmem = (struct slic_shmem *)(unsigned long)
2712                          adapter->phys_shmem;
2713
2714                 spin_lock_irqsave(&adapter->bit64reglock, flags);
2715                 slic_reg32_write(&slic_regs->slic_addr_upper,
2716                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2717                 slic_reg32_write(&slic_regs->slic_isp,
2718                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2719                 spin_unlock_irqrestore(&adapter->bit64reglock, flags);
2720
2721                 status = slic_config_get(adapter, phys_configl, phys_configh);
2722                 if (status) {
2723                         dev_err(&adapter->pcidev->dev,
2724                                 "Failed to fetch config data from device.\n");
2725                         goto card_init_err;
2726                 }
2727
2728                 for (;;) {
2729                         if (adapter->pshmem->isr) {
2730                                 if (adapter->pshmem->isr & ISR_UPC) {
2731                                         adapter->pshmem->isr = 0;
2732                                         slic_reg64_write(adapter,
2733                                                 &slic_regs->slic_isp, 0,
2734                                                 &slic_regs->slic_addr_upper,
2735                                                 0, FLUSH);
2736                                         slic_reg32_write(&slic_regs->slic_isr,
2737                                                          0, FLUSH);
2738
2739                                         slic_upr_request_complete(adapter, 0);
2740                                         break;
2741                                 }
2742
2743                                 adapter->pshmem->isr = 0;
2744                                 slic_reg32_write(&slic_regs->slic_isr,
2745                                                  0, FLUSH);
2746                         } else {
2747                                 mdelay(1);
2748                                 i++;
2749                                 if (i > 5000) {
2750                                         dev_err(&adapter->pcidev->dev,
2751                                                 "Fetch of config data timed out.\n");
2752                                         slic_reg64_write(adapter,
2753                                                 &slic_regs->slic_isp, 0,
2754                                                 &slic_regs->slic_addr_upper,
2755                                                 0, FLUSH);
2756                                         status = -EINVAL;
2757                                         goto card_init_err;
2758                                 }
2759                         }
2760                 }
2761
2762                 switch (adapter->devid) {
2763                 /* Oasis card */
2764                 case SLIC_2GB_DEVICE_ID:
2765                         /* extract EEPROM data and pointers to EEPROM data */
2766                         pOeeprom = (struct oslic_eeprom *)peeprom;
2767                         eecodesize = pOeeprom->EecodeSize;
2768                         dramsize = pOeeprom->DramSize;
2769                         pmac = pOeeprom->MacInfo;
2770                         fruformat = pOeeprom->FruFormat;
2771                         patkfru = &pOeeprom->AtkFru;
2772                         oemfruformat = pOeeprom->OemFruFormat;
2773                         poemfru = &pOeeprom->OemFru;
2774                         macaddrs = 2;
2775                         /*
2776                          * Minor kludge for Oasis card
2777                          * get 2 MAC addresses from the
2778                          * EEPROM to ensure that function 1
2779                          * gets the Port 1 MAC address
2780                          */
2781                         break;
2782                 default:
2783                         /* extract EEPROM data and pointers to EEPROM data */
2784                         eecodesize = peeprom->EecodeSize;
2785                         dramsize = peeprom->DramSize;
2786                         pmac = peeprom->u2.mac.MacInfo;
2787                         fruformat = peeprom->FruFormat;
2788                         patkfru = &peeprom->AtkFru;
2789                         oemfruformat = peeprom->OemFruFormat;
2790                         poemfru = &peeprom->OemFru;
2791                         break;
2792                 }
2793
2794                 card->config.EepromValid = false;
2795
2796                 /*  see if the EEPROM is valid by checking it's checksum */
2797                 if ((eecodesize <= MAX_EECODE_SIZE) &&
2798                     (eecodesize >= MIN_EECODE_SIZE)) {
2799
2800                         ee_chksum =
2801                             *(u16 *)((char *)peeprom + (eecodesize - 2));
2802                         /*
2803                          *  calculate the EEPROM checksum
2804                          */
2805                         calc_chksum = slic_eeprom_cksum(peeprom,
2806                                                         eecodesize - 2);
2807                         /*
2808                          *  if the ucdoe chksum flag bit worked,
2809                          *  we wouldn't need this
2810                          */
2811                         if (ee_chksum == calc_chksum)
2812                                 card->config.EepromValid = true;
2813                 }
2814                 /*  copy in the DRAM size */
2815                 card->config.DramSize = dramsize;
2816
2817                 /*  copy in the MAC address(es) */
2818                 for (i = 0; i < macaddrs; i++) {
2819                         memcpy(&card->config.MacInfo[i],
2820                                &pmac[i], sizeof(struct slic_config_mac));
2821                 }
2822
2823                 /*  copy the Alacritech FRU information */
2824                 card->config.FruFormat = fruformat;
2825                 memcpy(&card->config.AtkFru, patkfru,
2826                                                 sizeof(struct atk_fru));
2827
2828                 pci_free_consistent(adapter->pcidev,
2829                                     sizeof(struct slic_eeprom),
2830                                     peeprom, phys_config);
2831
2832                 if (!card->config.EepromValid) {
2833                         slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
2834                                          &slic_regs->slic_addr_upper,
2835                                          0, FLUSH);
2836                         dev_err(&adapter->pcidev->dev, "EEPROM invalid.\n");
2837                         return -EINVAL;
2838                 }
2839
2840                 card->config_set = 1;
2841         }
2842
2843         status = slic_card_download_gbrcv(adapter);
2844         if (status)
2845                 return status;
2846
2847         if (slic_global.dynamic_intagg)
2848                 slic_intagg_set(adapter, 0);
2849         else
2850                 slic_intagg_set(adapter, adapter->intagg_delay);
2851
2852         /*
2853          *  Initialize ping status to "ok"
2854          */
2855         card->pingstatus = ISR_PINGMASK;
2856
2857         /*
2858          * Lastly, mark our card state as up and return success
2859          */
2860         card->state = CARD_UP;
2861         card->reset_in_progress = 0;
2862
2863         return 0;
2864
2865 card_init_err:
2866         pci_free_consistent(adapter->pcidev, sizeof(struct slic_eeprom),
2867                             peeprom, phys_config);
2868         return status;
2869 }
2870
2871 static int slic_get_coalesce(struct net_device *dev,
2872                              struct ethtool_coalesce *coalesce)
2873 {
2874         struct adapter *adapter = netdev_priv(dev);
2875
2876         adapter->intagg_delay = coalesce->rx_coalesce_usecs;
2877         adapter->dynamic_intagg = coalesce->use_adaptive_rx_coalesce;
2878         return 0;
2879 }
2880
2881 static int slic_set_coalesce(struct net_device *dev,
2882                              struct ethtool_coalesce *coalesce)
2883 {
2884         struct adapter *adapter = netdev_priv(dev);
2885
2886         coalesce->rx_coalesce_usecs = adapter->intagg_delay;
2887         coalesce->use_adaptive_rx_coalesce = adapter->dynamic_intagg;
2888         return 0;
2889 }
2890
2891 static void slic_init_driver(void)
2892 {
2893         if (slic_first_init) {
2894                 slic_first_init = 0;
2895                 spin_lock_init(&slic_global.driver_lock);
2896         }
2897 }
2898
2899 static void slic_init_adapter(struct net_device *netdev,
2900                               struct pci_dev *pcidev,
2901                               const struct pci_device_id *pci_tbl_entry,
2902                               void __iomem *memaddr, int chip_idx)
2903 {
2904         ushort index;
2905         struct slic_handle *pslic_handle;
2906         struct adapter *adapter = netdev_priv(netdev);
2907
2908 /*      adapter->pcidev = pcidev;*/
2909         adapter->vendid = pci_tbl_entry->vendor;
2910         adapter->devid = pci_tbl_entry->device;
2911         adapter->subsysid = pci_tbl_entry->subdevice;
2912         adapter->busnumber = pcidev->bus->number;
2913         adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
2914         adapter->functionnumber = (pcidev->devfn & 0x7);
2915         adapter->slic_regs = memaddr;
2916         adapter->irq = pcidev->irq;
2917         adapter->chipid = chip_idx;
2918         adapter->port = 0;
2919         adapter->cardindex = adapter->port;
2920         spin_lock_init(&adapter->upr_lock);
2921         spin_lock_init(&adapter->bit64reglock);
2922         spin_lock_init(&adapter->adapter_lock);
2923         spin_lock_init(&adapter->reset_lock);
2924         spin_lock_init(&adapter->handle_lock);
2925
2926         adapter->card_size = 1;
2927         /*
2928          * Initialize slic_handle array
2929          */
2930         /*
2931          * Start with 1.  0 is an invalid host handle.
2932          */
2933         for (index = 1, pslic_handle = &adapter->slic_handles[1];
2934              index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
2935
2936                 pslic_handle->token.handle_index = index;
2937                 pslic_handle->type = SLIC_HANDLE_FREE;
2938                 pslic_handle->next = adapter->pfree_slic_handles;
2939                 adapter->pfree_slic_handles = pslic_handle;
2940         }
2941         adapter->pshmem = (struct slic_shmem *)
2942                                         pci_alloc_consistent(adapter->pcidev,
2943                                         sizeof(struct slic_shmem),
2944                                         &adapter->
2945                                         phys_shmem);
2946         if (adapter->pshmem)
2947                 memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
2948 }
2949
2950 static const struct net_device_ops slic_netdev_ops = {
2951         .ndo_open               = slic_entry_open,
2952         .ndo_stop               = slic_entry_halt,
2953         .ndo_start_xmit         = slic_xmit_start,
2954         .ndo_do_ioctl           = slic_ioctl,
2955         .ndo_set_mac_address    = slic_mac_set_address,
2956         .ndo_get_stats          = slic_get_stats,
2957         .ndo_set_rx_mode        = slic_mcast_set_list,
2958         .ndo_validate_addr      = eth_validate_addr,
2959         .ndo_change_mtu         = eth_change_mtu,
2960 };
2961
2962 static u32 slic_card_locate(struct adapter *adapter)
2963 {
2964         struct sliccard *card = slic_global.slic_card;
2965         struct physcard *physcard = slic_global.phys_card;
2966         ushort card_hostid;
2967         u16 __iomem *hostid_reg;
2968         uint i;
2969         uint rdhostid_offset = 0;
2970
2971         switch (adapter->devid) {
2972         case SLIC_2GB_DEVICE_ID:
2973                 rdhostid_offset = SLIC_RDHOSTID_2GB;
2974                 break;
2975         case SLIC_1GB_DEVICE_ID:
2976                 rdhostid_offset = SLIC_RDHOSTID_1GB;
2977                 break;
2978         default:
2979                 return -ENODEV;
2980         }
2981
2982         hostid_reg =
2983             (u16 __iomem *)(((u8 __iomem *)(adapter->slic_regs)) +
2984             rdhostid_offset);
2985
2986         /* read the 16 bit hostid from SRAM */
2987         card_hostid = (ushort)readw(hostid_reg);
2988
2989         /* Initialize a new card structure if need be */
2990         if (card_hostid == SLIC_HOSTID_DEFAULT) {
2991                 card = kzalloc(sizeof(*card), GFP_KERNEL);
2992                 if (!card)
2993                         return -ENOMEM;
2994
2995                 card->next = slic_global.slic_card;
2996                 slic_global.slic_card = card;
2997                 card->busnumber = adapter->busnumber;
2998                 card->slotnumber = adapter->slotnumber;
2999
3000                 /* Find an available cardnum */
3001                 for (i = 0; i < SLIC_MAX_CARDS; i++) {
3002                         if (slic_global.cardnuminuse[i] == 0) {
3003                                 slic_global.cardnuminuse[i] = 1;
3004                                 card->cardnum = i;
3005                                 break;
3006                         }
3007                 }
3008                 slic_global.num_slic_cards++;
3009         } else {
3010                 /* Card exists, find the card this adapter belongs to */
3011                 while (card) {
3012                         if (card->cardnum == card_hostid)
3013                                 break;
3014                         card = card->next;
3015                 }
3016         }
3017
3018         if (!card)
3019                 return -ENXIO;
3020         /* Put the adapter in the card's adapter list */
3021         if (!card->adapter[adapter->port]) {
3022                 card->adapter[adapter->port] = adapter;
3023                 adapter->card = card;
3024         }
3025
3026         card->card_size = 1;    /* one port per *logical* card */
3027
3028         while (physcard) {
3029                 for (i = 0; i < SLIC_MAX_PORTS; i++) {
3030                         if (physcard->adapter[i])
3031                                 break;
3032                 }
3033                 if (i == SLIC_MAX_PORTS)
3034                         break;
3035
3036                 if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
3037                         break;
3038                 physcard = physcard->next;
3039         }
3040         if (!physcard) {
3041                 /* no structure allocated for this physical card yet */
3042                 physcard = kzalloc(sizeof(*physcard), GFP_ATOMIC);
3043                 if (!physcard) {
3044                         if (card_hostid == SLIC_HOSTID_DEFAULT)
3045                                 kfree(card);
3046                         return -ENOMEM;
3047                 }
3048
3049                 physcard->next = slic_global.phys_card;
3050                 slic_global.phys_card = physcard;
3051                 physcard->adapters_allocd = 1;
3052         } else {
3053                 physcard->adapters_allocd++;
3054         }
3055         /* Note - this is ZERO relative */
3056         adapter->physport = physcard->adapters_allocd - 1;
3057
3058         physcard->adapter[adapter->physport] = adapter;
3059         adapter->physcard = physcard;
3060
3061         return 0;
3062 }
3063
3064 static int slic_entry_probe(struct pci_dev *pcidev,
3065                                const struct pci_device_id *pci_tbl_entry)
3066 {
3067         static int cards_found;
3068         static int did_version;
3069         int err = -ENODEV;
3070         struct net_device *netdev;
3071         struct adapter *adapter;
3072         void __iomem *memmapped_ioaddr = NULL;
3073         ulong mmio_start = 0;
3074         ulong mmio_len = 0;
3075         struct sliccard *card = NULL;
3076         int pci_using_dac = 0;
3077
3078         err = pci_enable_device(pcidev);
3079
3080         if (err)
3081                 return err;
3082
3083         if (did_version++ == 0) {
3084                 dev_info(&pcidev->dev, "%s\n", slic_banner);
3085                 dev_info(&pcidev->dev, "%s\n", slic_proc_version);
3086         }
3087
3088         if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
3089                 pci_using_dac = 1;
3090                 err = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64));
3091                 if (err) {
3092                         dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for consistent allocations\n");
3093                         goto err_out_disable_pci;
3094                 }
3095         } else {
3096                 err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
3097                 if (err) {
3098                         dev_err(&pcidev->dev, "no usable DMA configuration\n");
3099                         goto err_out_disable_pci;
3100                 }
3101                 pci_using_dac = 0;
3102                 pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
3103         }
3104
3105         err = pci_request_regions(pcidev, DRV_NAME);
3106         if (err) {
3107                 dev_err(&pcidev->dev, "can't obtain PCI resources\n");
3108                 goto err_out_disable_pci;
3109         }
3110
3111         pci_set_master(pcidev);
3112
3113         netdev = alloc_etherdev(sizeof(struct adapter));
3114         if (!netdev) {
3115                 err = -ENOMEM;
3116                 goto err_out_exit_slic_probe;
3117         }
3118
3119         netdev->ethtool_ops = &slic_ethtool_ops;
3120         SET_NETDEV_DEV(netdev, &pcidev->dev);
3121
3122         pci_set_drvdata(pcidev, netdev);
3123         adapter = netdev_priv(netdev);
3124         adapter->netdev = netdev;
3125         adapter->pcidev = pcidev;
3126         slic_global.dynamic_intagg = adapter->dynamic_intagg;
3127         if (pci_using_dac)
3128                 netdev->features |= NETIF_F_HIGHDMA;
3129
3130         mmio_start = pci_resource_start(pcidev, 0);
3131         mmio_len = pci_resource_len(pcidev, 0);
3132
3133         memmapped_ioaddr = ioremap(mmio_start, mmio_len);
3134         if (!memmapped_ioaddr) {
3135                 dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
3136                         mmio_len, mmio_start);
3137                 err = -ENOMEM;
3138                 goto err_out_free_netdev;
3139         }
3140
3141         slic_config_pci(pcidev);
3142
3143         slic_init_driver();
3144
3145         slic_init_adapter(netdev,
3146                           pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
3147
3148         err = slic_card_locate(adapter);
3149         if (err) {
3150                 dev_err(&pcidev->dev, "cannot locate card\n");
3151                 goto err_out_unmap;
3152         }
3153
3154         card = adapter->card;
3155
3156         if (!adapter->allocated) {
3157                 card->adapters_allocated++;
3158                 adapter->allocated = 1;
3159         }
3160
3161         err = slic_card_init(card, adapter);
3162         if (err)
3163                 goto err_out_unmap;
3164
3165         slic_adapter_set_hwaddr(adapter);
3166
3167         netdev->base_addr = (unsigned long)memmapped_ioaddr;
3168         netdev->irq = adapter->irq;
3169         netdev->netdev_ops = &slic_netdev_ops;
3170
3171         strcpy(netdev->name, "eth%d");
3172         err = register_netdev(netdev);
3173         if (err) {
3174                 dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
3175                 goto err_out_unmap;
3176         }
3177
3178         cards_found++;
3179
3180         return 0;
3181
3182 err_out_unmap:
3183         iounmap(memmapped_ioaddr);
3184 err_out_free_netdev:
3185         free_netdev(netdev);
3186 err_out_exit_slic_probe:
3187         pci_release_regions(pcidev);
3188 err_out_disable_pci:
3189         pci_disable_device(pcidev);
3190         return err;
3191 }
3192
3193 static struct pci_driver slic_driver = {
3194         .name = DRV_NAME,
3195         .id_table = slic_pci_tbl,
3196         .probe = slic_entry_probe,
3197         .remove = slic_entry_remove,
3198 };
3199
3200 static int __init slic_module_init(void)
3201 {
3202         slic_init_driver();
3203
3204         return pci_register_driver(&slic_driver);
3205 }
3206
3207 static void __exit slic_module_cleanup(void)
3208 {
3209         pci_unregister_driver(&slic_driver);
3210 }
3211
3212 static struct ethtool_ops slic_ethtool_ops = {
3213         .get_coalesce = slic_get_coalesce,
3214         .set_coalesce = slic_set_coalesce
3215 };
3216
3217 module_init(slic_module_init);
3218 module_exit(slic_module_cleanup);