3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
5 * Copyright © 2005 Agere Systems Inc.
9 * Copyright (c) 2011 Mark Einon <mark.einon@gmail.com>
11 *------------------------------------------------------------------------------
15 * This software is provided subject to the following terms and conditions,
16 * which you should read carefully before using the software. Using this
17 * software indicates your acceptance of these terms and conditions. If you do
18 * not agree with these terms and conditions, do not use the software.
20 * Copyright © 2005 Agere Systems Inc.
21 * All rights reserved.
23 * Redistribution and use in source or binary forms, with or without
24 * modifications, are permitted provided that the following conditions are met:
26 * . Redistributions of source code must retain the above copyright notice, this
27 * list of conditions and the following Disclaimer as comments in the code as
28 * well as in the documentation and/or other materials provided with the
31 * . Redistributions in binary form must reproduce the above copyright notice,
32 * this list of conditions and the following Disclaimer in the documentation
33 * and/or other materials provided with the distribution.
35 * . Neither the name of Agere Systems Inc. nor the names of the contributors
36 * may be used to endorse or promote products derived from this software
37 * without specific prior written permission.
41 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
42 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
43 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
44 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
45 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
46 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
47 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
48 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
49 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
50 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
51 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
56 #include <linux/pci.h>
57 #include <linux/init.h>
58 #include <linux/module.h>
59 #include <linux/types.h>
60 #include <linux/kernel.h>
62 #include <linux/sched.h>
63 #include <linux/ptrace.h>
64 #include <linux/slab.h>
65 #include <linux/ctype.h>
66 #include <linux/string.h>
67 #include <linux/timer.h>
68 #include <linux/interrupt.h>
70 #include <linux/delay.h>
71 #include <linux/bitops.h>
74 #include <linux/netdevice.h>
75 #include <linux/etherdevice.h>
76 #include <linux/skbuff.h>
77 #include <linux/if_arp.h>
78 #include <linux/ioport.h>
79 #include <linux/crc32.h>
80 #include <linux/random.h>
81 #include <linux/phy.h>
85 MODULE_AUTHOR("Victor Soriano <vjsoriano@agere.com>");
86 MODULE_AUTHOR("Mark Einon <mark.einon@gmail.com>");
87 MODULE_LICENSE("Dual BSD/GPL");
88 MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere Systems");
91 #define MAX_NUM_REGISTER_POLLS 1000
92 #define MAX_NUM_WRITE_RETRIES 2
95 #define COUNTER_WRAP_16_BIT 0x10000
96 #define COUNTER_WRAP_12_BIT 0x1000
99 #define INTERNAL_MEM_SIZE 0x400 /* 1024 of internal memory */
100 #define INTERNAL_MEM_RX_OFFSET 0x1FF /* 50% Tx, 50% Rx */
104 * For interrupts, normal running is:
105 * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt,
106 * watchdog_interrupt & txdma_xfer_done
108 * In both cases, when flow control is enabled for either Tx or bi-direction,
109 * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the
110 * buffer rings are running low.
112 #define INT_MASK_DISABLE 0xffffffff
114 /* NOTE: Masking out MAC_STAT Interrupt for now...
115 * #define INT_MASK_ENABLE 0xfff6bf17
116 * #define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7
118 #define INT_MASK_ENABLE 0xfffebf17
119 #define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7
121 /* General defines */
122 /* Packet and header sizes */
123 #define NIC_MIN_PACKET_SIZE 60
125 /* Multicast list size */
126 #define NIC_MAX_MCAST_LIST 128
128 /* Supported Filters */
129 #define ET131X_PACKET_TYPE_DIRECTED 0x0001
130 #define ET131X_PACKET_TYPE_MULTICAST 0x0002
131 #define ET131X_PACKET_TYPE_BROADCAST 0x0004
132 #define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008
133 #define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010
136 #define ET131X_TX_TIMEOUT (1 * HZ)
137 #define NIC_SEND_HANG_THRESHOLD 0
140 #define fMP_DEST_MULTI 0x00000001
141 #define fMP_DEST_BROAD 0x00000002
143 /* MP_ADAPTER flags */
144 #define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
145 #define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
147 /* MP_SHARED flags */
148 #define fMP_ADAPTER_LOWER_POWER 0x00200000
150 #define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
151 #define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
153 #define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
155 /* Some offsets in PCI config space that are actually used. */
156 #define ET1310_PCI_MAC_ADDRESS 0xA4
157 #define ET1310_PCI_EEPROM_STATUS 0xB2
158 #define ET1310_PCI_ACK_NACK 0xC0
159 #define ET1310_PCI_REPLAY 0xC2
160 #define ET1310_PCI_L0L1LATENCY 0xCF
162 /* PCI Product IDs */
163 #define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */
164 #define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */
166 /* Define order of magnitude converter */
167 #define NANO_IN_A_MICRO 1000
169 #define PARM_RX_NUM_BUFS_DEF 4
170 #define PARM_RX_TIME_INT_DEF 10
171 #define PARM_RX_MEM_END_DEF 0x2bc
172 #define PARM_TX_TIME_INT_DEF 40
173 #define PARM_TX_NUM_BUFS_DEF 4
174 #define PARM_DMA_CACHE_DEF 0
178 #define FBR_CHUNKS 32
179 #define MAX_DESC_PER_RING_RX 1024
181 /* number of RFDs - default and min */
183 #define RFD_LOW_WATER_MARK 40
184 #define NIC_DEFAULT_NUM_RFD 1024
187 #define RFD_LOW_WATER_MARK 20
188 #define NIC_DEFAULT_NUM_RFD 256
192 #define NIC_MIN_NUM_RFD 64
193 #define NUM_PACKETS_HANDLED 256
195 #define ALCATEL_MULTICAST_PKT 0x01000000
196 #define ALCATEL_BROADCAST_PKT 0x02000000
198 /* typedefs for Free Buffer Descriptors */
202 u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */
205 /* Packet Status Ring Descriptors
209 * top 16 bits are from the Alcatel Status Word as enumerated in
210 * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2)
213 * 1: ipa IP checksum assist
214 * 2: ipp IP checksum pass
215 * 3: tcpa TCP checksum assist
216 * 4: tcpp TCP checksum pass
218 * 6: rxmac_error RXMAC Error Indicator
219 * 7: drop Drop packet
220 * 8: ft Frame Truncated
224 * 16: asw_prev_pkt_dropped e.g. IFG too small on previous
225 * 17: asw_RX_DV_event short receive event detected
226 * 18: asw_false_carrier_event bad carrier since last good packet
227 * 19: asw_code_err one or more nibbles signalled as errors
228 * 20: asw_CRC_err CRC error
229 * 21: asw_len_chk_err frame length field incorrect
230 * 22: asw_too_long frame length > 1518 bytes
231 * 23: asw_OK valid CRC + no code error
232 * 24: asw_multicast has a multicast address
233 * 25: asw_broadcast has a broadcast address
234 * 26: asw_dribble_nibble spurious bits after EOP
235 * 27: asw_control_frame is a control frame
236 * 28: asw_pause_frame is a pause frame
237 * 29: asw_unsupported_op unsupported OP code
238 * 30: asw_VLAN_tag VLAN tag detected
239 * 31: asw_long_evt Rx long event
242 * 0-15: length length in bytes
243 * 16-25: bi Buffer Index
244 * 26-27: ri Ring Index
248 struct pkt_stat_desc {
253 /* Typedefs for the RX DMA status word */
256 * rx status word 0 holds part of the status bits of the Rx DMA engine
257 * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word
258 * which contains the Free Buffer ring 0 and 1 available offset.
260 * bit 0-9 FBR1 offset
261 * bit 10 Wrap flag for FBR1
262 * bit 16-25 FBR0 offset
263 * bit 26 Wrap flag for FBR0
267 * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine
268 * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word
269 * which contains the Packet Status Ring available offset.
272 * bit 16-27 PSRoffset
278 * struct rx_status_block is a structure representing the status of the Rx
279 * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020
281 struct rx_status_block {
287 * Structure for look-up table holding free buffer ring pointers, addresses
291 void *virt[MAX_DESC_PER_RING_RX];
292 void *buffer1[MAX_DESC_PER_RING_RX];
293 void *buffer2[MAX_DESC_PER_RING_RX];
294 u32 bus_high[MAX_DESC_PER_RING_RX];
295 u32 bus_low[MAX_DESC_PER_RING_RX];
297 dma_addr_t ring_physaddr;
298 void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
299 dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
308 * struct rx_ring is the sructure representing the adaptor's local
309 * reference(s) to the rings
311 ******************************************************************************
312 * IMPORTANT NOTE :- fbr_lookup *fbr[NUM_FBRS] uses index 0 to refer to FBR1
313 * and index 1 to refer to FRB0
314 ******************************************************************************
317 struct fbr_lookup *fbr[NUM_FBRS];
318 void *ps_ring_virtaddr;
319 dma_addr_t ps_ring_physaddr;
323 struct rx_status_block *rx_status_block;
324 dma_addr_t rx_status_bus;
327 struct list_head recv_list;
332 bool unfinished_receives;
334 /* lookaside lists */
335 struct kmem_cache *recv_lookaside;
340 * word 2 of the control bits in the Tx Descriptor ring for the ET-1310
342 * 0-15: length of packet
345 * 29-31: VLAN priority
347 * word 3 of the control bits in the Tx Descriptor ring for the ET-1310
349 * 0: last packet in the sequence
350 * 1: first packet in the sequence
351 * 2: interrupt the processor when this pkt sent
352 * 3: Control word - no packet data
353 * 4: Issue half-duplex backpressure : XON/XOFF
354 * 5: send pause frame
355 * 6: Tx frame has error
359 * 10: Packet is a Huge packet
360 * 11: append VLAN tag
361 * 12: IP checksum assist
362 * 13: TCP checksum assist
363 * 14: UDP checksum assist
366 /* struct tx_desc represents each descriptor on the ring */
370 u32 len_vlan; /* control words how to xmit the */
371 u32 flags; /* data (detailed above) */
375 * The status of the Tx DMA engine it sits in free memory, and is pointed to
376 * by 0x101c / 0x1020. This is a DMA10 type
379 /* TCB (Transmit Control Block: Host Side) */
381 struct tcb *next; /* Next entry in ring */
382 u32 flags; /* Our flags for the packet */
383 u32 count; /* Used to spot stuck/lost packets */
384 u32 stale; /* Used to spot stuck/lost packets */
385 struct sk_buff *skb; /* Network skb we are tied to */
386 u32 index; /* Ring indexes */
390 /* Structure representing our local reference(s) to the ring */
392 /* TCB (Transmit Control Block) memory and lists */
393 struct tcb *tcb_ring;
395 /* List of TCBs that are ready to be used */
396 struct tcb *tcb_qhead;
397 struct tcb *tcb_qtail;
399 /* list of TCBs that are currently being sent. NOTE that access to all
400 * three of these (including used) are controlled via the
401 * TCBSendQLock. This lock should be secured prior to incementing /
402 * decrementing used, or any queue manipulation on send_head /
405 struct tcb *send_head;
406 struct tcb *send_tail;
409 /* The actual descriptor ring */
410 struct tx_desc *tx_desc_ring;
411 dma_addr_t tx_desc_ring_pa;
413 /* send_idx indicates where we last wrote to in the descriptor ring. */
416 /* The location of the write-back status block */
418 dma_addr_t tx_status_pa;
420 /* Packets since the last IRQ: used for interrupt coalescing */
425 * Do not change these values: if changed, then change also in respective
426 * TXdma and Rxdma engines
428 #define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */
432 * These values are all superseded by registry entries to facilitate tuning.
433 * Once the desired performance has been achieved, the optimal registry values
434 * should be re-populated to these #defines:
436 #define TX_ERROR_PERIOD 1000
438 #define LO_MARK_PERCENT_FOR_PSR 15
439 #define LO_MARK_PERCENT_FOR_RX 15
441 /* RFD (Receive Frame Descriptor) */
443 struct list_head list_node;
445 u32 len; /* total size of receive frame */
452 #define FLOW_TXONLY 1
453 #define FLOW_RXONLY 2
456 /* Struct to define some device statistics */
460 * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
461 * MUST have 32, then we'll need another way to perform atomic
464 u32 unicast_pkts_rcvd;
465 atomic_t unicast_pkts_xmtd;
466 u32 multicast_pkts_rcvd;
467 atomic_t multicast_pkts_xmtd;
468 u32 broadcast_pkts_rcvd;
469 atomic_t broadcast_pkts_xmtd;
470 u32 rcvd_pkts_dropped;
476 u32 tx_excessive_collisions;
477 u32 tx_first_collisions;
478 u32 tx_late_collisions;
488 u32 rx_code_violations;
491 u32 synchronous_iterations;
492 u32 interrupt_status;
495 /* The private adapter structure */
496 struct et131x_adapter {
497 struct net_device *netdev;
498 struct pci_dev *pdev;
499 struct mii_bus *mii_bus;
500 struct phy_device *phydev;
501 struct work_struct task;
503 /* Flags that indicate current state of the adapter */
506 /* local link state, to determine if a state change has occurred */
510 u8 rom_addr[ETH_ALEN];
518 spinlock_t tcb_send_qlock;
519 spinlock_t tcb_ready_qlock;
520 spinlock_t send_hw_lock;
523 spinlock_t rcv_pend_lock;
528 /* Packet Filter and look ahead size */
532 u32 multicast_addr_count;
533 u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN];
535 /* Pointer to the device's PCI register space */
536 struct address_map __iomem *regs;
538 /* Registry parameters */
539 u8 wanted_flow; /* Flow we want for 802.3x flow control */
540 u32 registry_jumbo_packet; /* Max supported ethernet packet size */
542 /* Derived from the registry: */
543 u8 flowcontrol; /* flow control validated by the far-end */
545 /* Minimize init-time */
546 struct timer_list error_timer;
548 /* variable putting the phy into coma mode when boot up with no cable
549 * plugged in after 5 seconds
553 /* Next two used to save power information at power down. This
554 * information will be used during power up to set up parts of Power
555 * Management in JAGCore
560 /* Tx Memory Variables */
561 struct tx_ring tx_ring;
563 /* Rx Memory Variables */
564 struct rx_ring rx_ring;
567 struct ce_stats stats;
569 struct net_device_stats net_stats;
572 static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status)
578 * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
579 * bits 7,1:0 both equal to 1, at least once after reset.
580 * Subsequent operations need only to check that bits 1:0 are equal
581 * to 1 prior to starting a single byte read/write
584 for (i = 0; i < MAX_NUM_REGISTER_POLLS; i++) {
585 /* Read registers grouped in DWORD1 */
586 if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP, ®))
589 /* I2C idle and Phy Queue Avail both true */
590 if ((reg & 0x3000) == 0x3000) {
601 * eeprom_write - Write a byte to the ET1310's EEPROM
602 * @adapter: pointer to our private adapter structure
603 * @addr: the address to write
604 * @data: the value to write
606 * Returns 1 for a successful write.
608 static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data)
610 struct pci_dev *pdev = adapter->pdev;
620 * For an EEPROM, an I2C single byte write is defined as a START
621 * condition followed by the device address, EEPROM address, one byte
622 * of data and a STOP condition. The STOP condition will trigger the
623 * EEPROM's internally timed write cycle to the nonvolatile memory.
624 * All inputs are disabled during this write cycle and the EEPROM will
625 * not respond to any access until the internal write is complete.
628 err = eeprom_wait_ready(pdev, NULL);
633 * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0,
634 * and bits 1:0 both =0. Bit 5 should be set according to the
635 * type of EEPROM being accessed (1=two byte addressing, 0=one
638 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
639 LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE))
644 /* Prepare EEPROM address for Step 3 */
646 for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) {
647 /* Write the address to the LBCIF Address Register */
648 if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr))
651 * Write the data to the LBCIF Data Register (the I2C write
654 if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER, data))
657 * Monitor bit 1:0 of the LBCIF Status Register. When bits
658 * 1:0 are both equal to 1, the I2C write has completed and the
659 * internal write cycle of the EEPROM is about to start.
660 * (bits 1:0 = 01 is a legal state while waiting from both
661 * equal to 1, but bits 1:0 = 10 is invalid and implies that
662 * something is broken).
664 err = eeprom_wait_ready(pdev, &status);
669 * Check bit 3 of the LBCIF Status Register. If equal to 1,
670 * an error has occurred.Don't break here if we are revision
671 * 1, this is so we do a blind write for load bug.
673 if ((status & LBCIF_STATUS_GENERAL_ERROR)
674 && adapter->pdev->revision == 0)
678 * Check bit 2 of the LBCIF Status Register. If equal to 1 an
679 * ACK error has occurred on the address phase of the write.
680 * This could be due to an actual hardware failure or the
681 * EEPROM may still be in its internal write cycle from a
682 * previous write. This write operation was ignored and must be
685 if (status & LBCIF_STATUS_ACK_ERROR) {
687 * This could be due to an actual hardware failure
688 * or the EEPROM may still be in its internal write
689 * cycle from a previous write. This write operation
690 * was ignored and must be repeated later.
701 * Set bit 6 of the LBCIF Control Register = 0.
706 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
707 LBCIF_CONTROL_LBCIF_ENABLE))
710 /* Do read until internal ACK_ERROR goes away meaning write
714 pci_write_config_dword(pdev,
715 LBCIF_ADDRESS_REGISTER,
718 pci_read_config_dword(pdev,
719 LBCIF_DATA_REGISTER, &val);
720 } while ((val & 0x00010000) == 0);
721 } while (val & 0x00040000);
723 if ((val & 0xFF00) != 0xC000 || index == 10000)
727 return writeok ? 0 : -EIO;
731 * eeprom_read - Read a byte from the ET1310's EEPROM
732 * @adapter: pointer to our private adapter structure
733 * @addr: the address from which to read
734 * @pdata: a pointer to a byte in which to store the value of the read
735 * @eeprom_id: the ID of the EEPROM
736 * @addrmode: how the EEPROM is to be accessed
738 * Returns 1 for a successful read
740 static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata)
742 struct pci_dev *pdev = adapter->pdev;
747 * A single byte read is similar to the single byte write, with the
748 * exception of the data flow:
751 err = eeprom_wait_ready(pdev, NULL);
755 * Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0,
756 * and bits 1:0 both =0. Bit 5 should be set according to the type
757 * of EEPROM being accessed (1=two byte addressing, 0=one byte
760 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
761 LBCIF_CONTROL_LBCIF_ENABLE))
764 * Write the address to the LBCIF Address Register (I2C read will
767 if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr))
770 * Monitor bit 0 of the LBCIF Status Register. When = 1, I2C read
771 * is complete. (if bit 1 =1 and bit 0 stays = 0, a hardware failure
774 err = eeprom_wait_ready(pdev, &status);
778 * Regardless of error status, read data byte from LBCIF Data
783 * Check bit 2 of the LBCIF Status Register. If = 1,
784 * then an error has occurred.
786 return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0;
789 static int et131x_init_eeprom(struct et131x_adapter *adapter)
791 struct pci_dev *pdev = adapter->pdev;
794 /* We first need to check the EEPROM Status code located at offset
795 * 0xB2 of config space
797 pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
800 /* THIS IS A WORKAROUND:
801 * I need to call this function twice to get my card in a
802 * LG M1 Express Dual running. I tried also a msleep before this
803 * function, because I thought there could be some time condidions
804 * but it didn't work. Call the whole function twice also work.
806 if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) {
808 "Could not read PCI config space for EEPROM Status\n");
812 /* Determine if the error(s) we care about are present. If they are
813 * present we need to fail.
815 if (eestatus & 0x4C) {
816 int write_failed = 0;
817 if (pdev->revision == 0x01) {
819 static const u8 eedata[4] = { 0xFE, 0x13, 0x10, 0xFF };
821 /* Re-write the first 4 bytes if we have an eeprom
822 * present and the revision id is 1, this fixes the
823 * corruption seen with 1310 B Silicon
825 for (i = 0; i < 3; i++)
826 if (eeprom_write(adapter, i, eedata[i]) < 0)
829 if (pdev->revision != 0x01 || write_failed) {
831 "Fatal EEPROM Status Error - 0x%04x\n", eestatus);
833 /* This error could mean that there was an error
834 * reading the eeprom or that the eeprom doesn't exist.
835 * We will treat each case the same and not try to
836 * gather additional information that normally would
837 * come from the eeprom, like MAC Address
839 adapter->has_eeprom = 0;
843 adapter->has_eeprom = 1;
845 /* Read the EEPROM for information regarding LED behavior. Refer to
846 * ET1310_phy.c, et131x_xcvr_init(), for its use.
848 eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]);
849 eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]);
851 if (adapter->eeprom_data[0] != 0xcd)
852 /* Disable all optional features */
853 adapter->eeprom_data[1] = 0x00;
859 * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310.
860 * @adapter: pointer to our adapter structure
862 static void et131x_rx_dma_enable(struct et131x_adapter *adapter)
864 /* Setup the receive dma configuration register for normal operation */
865 u32 csr = 0x2000; /* FBR1 enable */
867 if (adapter->rx_ring.fbr[0]->buffsize == 4096)
869 else if (adapter->rx_ring.fbr[0]->buffsize == 8192)
871 else if (adapter->rx_ring.fbr[0]->buffsize == 16384)
874 csr |= 0x0400; /* FBR0 enable */
875 if (adapter->rx_ring.fbr[1]->buffsize == 256)
877 else if (adapter->rx_ring.fbr[1]->buffsize == 512)
879 else if (adapter->rx_ring.fbr[1]->buffsize == 1024)
882 writel(csr, &adapter->regs->rxdma.csr);
884 csr = readl(&adapter->regs->rxdma.csr);
885 if ((csr & 0x00020000) != 0) {
887 csr = readl(&adapter->regs->rxdma.csr);
888 if ((csr & 0x00020000) != 0) {
889 dev_err(&adapter->pdev->dev,
890 "RX Dma failed to exit halt state. CSR 0x%08x\n",
897 * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
898 * @adapter: pointer to our adapter structure
900 static void et131x_rx_dma_disable(struct et131x_adapter *adapter)
903 /* Setup the receive dma configuration register */
904 writel(0x00002001, &adapter->regs->rxdma.csr);
905 csr = readl(&adapter->regs->rxdma.csr);
906 if ((csr & 0x00020000) == 0) { /* Check halt status (bit 17) */
908 csr = readl(&adapter->regs->rxdma.csr);
909 if ((csr & 0x00020000) == 0)
910 dev_err(&adapter->pdev->dev,
911 "RX Dma failed to enter halt state. CSR 0x%08x\n",
917 * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
918 * @adapter: pointer to our adapter structure
920 * Mainly used after a return to the D0 (full-power) state from a lower state.
922 static void et131x_tx_dma_enable(struct et131x_adapter *adapter)
924 /* Setup the transmit dma configuration register for normal
927 writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
928 &adapter->regs->txdma.csr);
931 static inline void add_10bit(u32 *v, int n)
933 *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
936 static inline void add_12bit(u32 *v, int n)
938 *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
942 * et1310_config_mac_regs1 - Initialize the first part of MAC regs
943 * @adapter: pointer to our adapter structure
945 static void et1310_config_mac_regs1(struct et131x_adapter *adapter)
947 struct mac_regs __iomem *macregs = &adapter->regs->mac;
952 /* First we need to reset everything. Write to MAC configuration
953 * register 1 to perform reset.
955 writel(0xC00F0000, ¯egs->cfg1);
957 /* Next lets configure the MAC Inter-packet gap register */
958 ipg = 0x38005860; /* IPG1 0x38 IPG2 0x58 B2B 0x60 */
959 ipg |= 0x50 << 8; /* ifg enforce 0x50 */
960 writel(ipg, ¯egs->ipg);
962 /* Next lets configure the MAC Half Duplex register */
963 /* BEB trunc 0xA, Ex Defer, Rexmit 0xF Coll 0x37 */
964 writel(0x00A1F037, ¯egs->hfdp);
966 /* Next lets configure the MAC Interface Control register */
967 writel(0, ¯egs->if_ctrl);
969 /* Let's move on to setting up the mii management configuration */
970 writel(0x07, ¯egs->mii_mgmt_cfg); /* Clock reset 0x7 */
972 /* Next lets configure the MAC Station Address register. These
973 * values are read from the EEPROM during initialization and stored
974 * in the adapter structure. We write what is stored in the adapter
975 * structure to the MAC Station Address registers high and low. This
976 * station address is used for generating and checking pause control
979 station2 = (adapter->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) |
980 (adapter->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT);
981 station1 = (adapter->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) |
982 (adapter->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) |
983 (adapter->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) |
985 writel(station1, ¯egs->station_addr_1);
986 writel(station2, ¯egs->station_addr_2);
988 /* Max ethernet packet in bytes that will be passed by the mac without
989 * being truncated. Allow the MAC to pass 4 more than our max packet
990 * size. This is 4 for the Ethernet CRC.
992 * Packets larger than (registry_jumbo_packet) that do not contain a
993 * VLAN ID will be dropped by the Rx function.
995 writel(adapter->registry_jumbo_packet + 4, ¯egs->max_fm_len);
997 /* clear out MAC config reset */
998 writel(0, ¯egs->cfg1);
1002 * et1310_config_mac_regs2 - Initialize the second part of MAC regs
1003 * @adapter: pointer to our adapter structure
1005 static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
1008 struct mac_regs __iomem *mac = &adapter->regs->mac;
1009 struct phy_device *phydev = adapter->phydev;
1015 ctl = readl(&adapter->regs->txmac.ctl);
1016 cfg1 = readl(&mac->cfg1);
1017 cfg2 = readl(&mac->cfg2);
1018 ifctrl = readl(&mac->if_ctrl);
1020 /* Set up the if mode bits */
1022 if (phydev && phydev->speed == SPEED_1000) {
1025 ifctrl &= ~(1 << 24);
1028 ifctrl |= (1 << 24);
1031 /* We need to enable Rx/Tx */
1032 cfg1 |= CFG1_RX_ENABLE | CFG1_TX_ENABLE | CFG1_TX_FLOW;
1033 /* Initialize loop back to off */
1034 cfg1 &= ~(CFG1_LOOPBACK | CFG1_RX_FLOW);
1035 if (adapter->flowcontrol == FLOW_RXONLY ||
1036 adapter->flowcontrol == FLOW_BOTH)
1037 cfg1 |= CFG1_RX_FLOW;
1038 writel(cfg1, &mac->cfg1);
1040 /* Now we need to initialize the MAC Configuration 2 register */
1041 /* preamble 7, check length, huge frame off, pad crc, crc enable
1046 /* Turn on duplex if needed */
1047 if (phydev && phydev->duplex == DUPLEX_FULL)
1050 ifctrl &= ~(1 << 26);
1051 if (phydev && phydev->duplex == DUPLEX_HALF)
1052 ifctrl |= (1<<26); /* Enable ghd */
1054 writel(ifctrl, &mac->if_ctrl);
1055 writel(cfg2, &mac->cfg2);
1060 cfg1 = readl(&mac->cfg1);
1061 } while ((cfg1 & CFG1_WAIT) != CFG1_WAIT && delay < 100);
1064 dev_warn(&adapter->pdev->dev,
1065 "Syncd bits did not respond correctly cfg1 word 0x%08x\n",
1070 ctl |= 0x09; /* TX mac enable, FC disable */
1071 writel(ctl, &adapter->regs->txmac.ctl);
1073 /* Ready to start the RXDMA/TXDMA engine */
1074 if (adapter->flags & fMP_ADAPTER_LOWER_POWER) {
1075 et131x_rx_dma_enable(adapter);
1076 et131x_tx_dma_enable(adapter);
1081 * et1310_in_phy_coma - check if the device is in phy coma
1082 * @adapter: pointer to our adapter structure
1084 * Returns 0 if the device is not in phy coma, 1 if it is in phy coma
1086 static int et1310_in_phy_coma(struct et131x_adapter *adapter)
1090 pmcsr = readl(&adapter->regs->global.pm_csr);
1092 return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0;
1095 static void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
1097 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1104 /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
1105 * the multi-cast LIST. If it is NOT specified, (and "ALL" is not
1106 * specified) then we should pass NO multi-cast addresses to the
1109 if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) {
1112 /* Loop through our multicast array and set up the device */
1113 for (i = 0; i < adapter->multicast_addr_count; i++) {
1116 result = ether_crc(6, adapter->multicast_list[i]);
1118 result = (result & 0x3F800000) >> 23;
1121 hash1 |= (1 << result);
1122 } else if ((31 < result) && (result < 64)) {
1124 hash2 |= (1 << result);
1125 } else if ((63 < result) && (result < 96)) {
1127 hash3 |= (1 << result);
1130 hash4 |= (1 << result);
1135 /* Write out the new hash to the device */
1136 pm_csr = readl(&adapter->regs->global.pm_csr);
1137 if (!et1310_in_phy_coma(adapter)) {
1138 writel(hash1, &rxmac->multi_hash1);
1139 writel(hash2, &rxmac->multi_hash2);
1140 writel(hash3, &rxmac->multi_hash3);
1141 writel(hash4, &rxmac->multi_hash4);
1145 static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter)
1147 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1153 /* Set up unicast packet filter reg 3 to be the first two octets of
1154 * the MAC address for both address
1156 * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
1157 * MAC address for second address
1159 * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
1160 * MAC address for first address
1162 uni_pf3 = (adapter->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) |
1163 (adapter->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) |
1164 (adapter->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) |
1167 uni_pf2 = (adapter->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) |
1168 (adapter->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) |
1169 (adapter->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) |
1172 uni_pf1 = (adapter->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) |
1173 (adapter->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) |
1174 (adapter->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) |
1177 pm_csr = readl(&adapter->regs->global.pm_csr);
1178 if (!et1310_in_phy_coma(adapter)) {
1179 writel(uni_pf1, &rxmac->uni_pf_addr1);
1180 writel(uni_pf2, &rxmac->uni_pf_addr2);
1181 writel(uni_pf3, &rxmac->uni_pf_addr3);
1185 static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
1187 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1188 struct phy_device *phydev = adapter->phydev;
1193 /* Disable the MAC while it is being configured (also disable WOL) */
1194 writel(0x8, &rxmac->ctrl);
1196 /* Initialize WOL to disabled. */
1197 writel(0, &rxmac->crc0);
1198 writel(0, &rxmac->crc12);
1199 writel(0, &rxmac->crc34);
1201 /* We need to set the WOL mask0 - mask4 next. We initialize it to
1202 * its default Values of 0x00000000 because there are not WOL masks
1205 writel(0, &rxmac->mask0_word0);
1206 writel(0, &rxmac->mask0_word1);
1207 writel(0, &rxmac->mask0_word2);
1208 writel(0, &rxmac->mask0_word3);
1210 writel(0, &rxmac->mask1_word0);
1211 writel(0, &rxmac->mask1_word1);
1212 writel(0, &rxmac->mask1_word2);
1213 writel(0, &rxmac->mask1_word3);
1215 writel(0, &rxmac->mask2_word0);
1216 writel(0, &rxmac->mask2_word1);
1217 writel(0, &rxmac->mask2_word2);
1218 writel(0, &rxmac->mask2_word3);
1220 writel(0, &rxmac->mask3_word0);
1221 writel(0, &rxmac->mask3_word1);
1222 writel(0, &rxmac->mask3_word2);
1223 writel(0, &rxmac->mask3_word3);
1225 writel(0, &rxmac->mask4_word0);
1226 writel(0, &rxmac->mask4_word1);
1227 writel(0, &rxmac->mask4_word2);
1228 writel(0, &rxmac->mask4_word3);
1230 /* Lets setup the WOL Source Address */
1231 sa_lo = (adapter->addr[2] << ET_WOL_LO_SA3_SHIFT) |
1232 (adapter->addr[3] << ET_WOL_LO_SA4_SHIFT) |
1233 (adapter->addr[4] << ET_WOL_LO_SA5_SHIFT) |
1235 writel(sa_lo, &rxmac->sa_lo);
1237 sa_hi = (u32) (adapter->addr[0] << ET_WOL_HI_SA1_SHIFT) |
1239 writel(sa_hi, &rxmac->sa_hi);
1241 /* Disable all Packet Filtering */
1242 writel(0, &rxmac->pf_ctrl);
1244 /* Let's initialize the Unicast Packet filtering address */
1245 if (adapter->packet_filter & ET131X_PACKET_TYPE_DIRECTED) {
1246 et1310_setup_device_for_unicast(adapter);
1247 pf_ctrl |= 4; /* Unicast filter */
1249 writel(0, &rxmac->uni_pf_addr1);
1250 writel(0, &rxmac->uni_pf_addr2);
1251 writel(0, &rxmac->uni_pf_addr3);
1254 /* Let's initialize the Multicast hash */
1255 if (!(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
1256 pf_ctrl |= 2; /* Multicast filter */
1257 et1310_setup_device_for_multicast(adapter);
1260 /* Runt packet filtering. Didn't work in version A silicon. */
1261 pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << 16;
1262 pf_ctrl |= 8; /* Fragment filter */
1264 if (adapter->registry_jumbo_packet > 8192)
1265 /* In order to transmit jumbo packets greater than 8k, the
1266 * FIFO between RxMAC and RxDMA needs to be reduced in size
1267 * to (16k - Jumbo packet size). In order to implement this,
1268 * we must use "cut through" mode in the RxMAC, which chops
1269 * packets down into segments which are (max_size * 16). In
1270 * this case we selected 256 bytes, since this is the size of
1271 * the PCI-Express TLP's that the 1310 uses.
1273 * seg_en on, fc_en off, size 0x10
1275 writel(0x41, &rxmac->mcif_ctrl_max_seg);
1277 writel(0, &rxmac->mcif_ctrl_max_seg);
1279 /* Initialize the MCIF water marks */
1280 writel(0, &rxmac->mcif_water_mark);
1282 /* Initialize the MIF control */
1283 writel(0, &rxmac->mif_ctrl);
1285 /* Initialize the Space Available Register */
1286 writel(0, &rxmac->space_avail);
1288 /* Initialize the the mif_ctrl register
1289 * bit 3: Receive code error. One or more nibbles were signaled as
1290 * errors during the reception of the packet. Clear this
1291 * bit in Gigabit, set it in 100Mbit. This was derived
1292 * experimentally at UNH.
1293 * bit 4: Receive CRC error. The packet's CRC did not match the
1294 * internally generated CRC.
1295 * bit 5: Receive length check error. Indicates that frame length
1296 * field value in the packet does not match the actual data
1297 * byte length and is not a type field.
1298 * bit 16: Receive frame truncated.
1299 * bit 17: Drop packet enable
1301 if (phydev && phydev->speed == SPEED_100)
1302 writel(0x30038, &rxmac->mif_ctrl);
1304 writel(0x30030, &rxmac->mif_ctrl);
1306 /* Finally we initialize RxMac to be enabled & WOL disabled. Packet
1307 * filter is always enabled since it is where the runt packets are
1308 * supposed to be dropped. For version A silicon, runt packet
1309 * dropping doesn't work, so it is disabled in the pf_ctrl register,
1310 * but we still leave the packet filter on.
1312 writel(pf_ctrl, &rxmac->pf_ctrl);
1313 writel(0x9, &rxmac->ctrl);
1316 static void et1310_config_txmac_regs(struct et131x_adapter *adapter)
1318 struct txmac_regs __iomem *txmac = &adapter->regs->txmac;
1320 /* We need to update the Control Frame Parameters
1321 * cfpt - control frame pause timer set to 64 (0x40)
1322 * cfep - control frame extended pause timer set to 0x0
1324 if (adapter->flowcontrol == FLOW_NONE)
1325 writel(0, &txmac->cf_param);
1327 writel(0x40, &txmac->cf_param);
1330 static void et1310_config_macstat_regs(struct et131x_adapter *adapter)
1332 struct macstat_regs __iomem *macstat =
1333 &adapter->regs->macstat;
1335 /* Next we need to initialize all the macstat registers to zero on
1338 writel(0, &macstat->txrx_0_64_byte_frames);
1339 writel(0, &macstat->txrx_65_127_byte_frames);
1340 writel(0, &macstat->txrx_128_255_byte_frames);
1341 writel(0, &macstat->txrx_256_511_byte_frames);
1342 writel(0, &macstat->txrx_512_1023_byte_frames);
1343 writel(0, &macstat->txrx_1024_1518_byte_frames);
1344 writel(0, &macstat->txrx_1519_1522_gvln_frames);
1346 writel(0, &macstat->rx_bytes);
1347 writel(0, &macstat->rx_packets);
1348 writel(0, &macstat->rx_fcs_errs);
1349 writel(0, &macstat->rx_multicast_packets);
1350 writel(0, &macstat->rx_broadcast_packets);
1351 writel(0, &macstat->rx_control_frames);
1352 writel(0, &macstat->rx_pause_frames);
1353 writel(0, &macstat->rx_unknown_opcodes);
1354 writel(0, &macstat->rx_align_errs);
1355 writel(0, &macstat->rx_frame_len_errs);
1356 writel(0, &macstat->rx_code_errs);
1357 writel(0, &macstat->rx_carrier_sense_errs);
1358 writel(0, &macstat->rx_undersize_packets);
1359 writel(0, &macstat->rx_oversize_packets);
1360 writel(0, &macstat->rx_fragment_packets);
1361 writel(0, &macstat->rx_jabbers);
1362 writel(0, &macstat->rx_drops);
1364 writel(0, &macstat->tx_bytes);
1365 writel(0, &macstat->tx_packets);
1366 writel(0, &macstat->tx_multicast_packets);
1367 writel(0, &macstat->tx_broadcast_packets);
1368 writel(0, &macstat->tx_pause_frames);
1369 writel(0, &macstat->tx_deferred);
1370 writel(0, &macstat->tx_excessive_deferred);
1371 writel(0, &macstat->tx_single_collisions);
1372 writel(0, &macstat->tx_multiple_collisions);
1373 writel(0, &macstat->tx_late_collisions);
1374 writel(0, &macstat->tx_excessive_collisions);
1375 writel(0, &macstat->tx_total_collisions);
1376 writel(0, &macstat->tx_pause_honored_frames);
1377 writel(0, &macstat->tx_drops);
1378 writel(0, &macstat->tx_jabbers);
1379 writel(0, &macstat->tx_fcs_errs);
1380 writel(0, &macstat->tx_control_frames);
1381 writel(0, &macstat->tx_oversize_frames);
1382 writel(0, &macstat->tx_undersize_frames);
1383 writel(0, &macstat->tx_fragments);
1384 writel(0, &macstat->carry_reg1);
1385 writel(0, &macstat->carry_reg2);
1387 /* Unmask any counters that we want to track the overflow of.
1388 * Initially this will be all counters. It may become clear later
1389 * that we do not need to track all counters.
1391 writel(0xFFFFBE32, &macstat->carry_reg1_mask);
1392 writel(0xFFFE7E8B, &macstat->carry_reg2_mask);
1396 * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
1397 * @adapter: pointer to our private adapter structure
1398 * @addr: the address of the transceiver
1399 * @reg: the register to read
1400 * @value: pointer to a 16-bit value in which the value will be stored
1402 * Returns 0 on success, errno on failure (as defined in errno.h)
1404 static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
1407 struct mac_regs __iomem *mac = &adapter->regs->mac;
1414 /* Save a local copy of the registers we are dealing with so we can
1417 mii_addr = readl(&mac->mii_mgmt_addr);
1418 mii_cmd = readl(&mac->mii_mgmt_cmd);
1420 /* Stop the current operation */
1421 writel(0, &mac->mii_mgmt_cmd);
1423 /* Set up the register we need to read from on the correct PHY */
1424 writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
1426 writel(0x1, &mac->mii_mgmt_cmd);
1431 mii_indicator = readl(&mac->mii_mgmt_indicator);
1432 } while ((mii_indicator & MGMT_WAIT) && delay < 50);
1434 /* If we hit the max delay, we could not read the register */
1436 dev_warn(&adapter->pdev->dev,
1437 "reg 0x%08x could not be read\n", reg);
1438 dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
1444 /* If we hit here we were able to read the register and we need to
1445 * return the value to the caller */
1446 *value = readl(&mac->mii_mgmt_stat) & 0xFFFF;
1448 /* Stop the read operation */
1449 writel(0, &mac->mii_mgmt_cmd);
1451 /* set the registers we touched back to the state at which we entered
1454 writel(mii_addr, &mac->mii_mgmt_addr);
1455 writel(mii_cmd, &mac->mii_mgmt_cmd);
1460 static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
1462 struct phy_device *phydev = adapter->phydev;
1467 return et131x_phy_mii_read(adapter, phydev->addr, reg, value);
1471 * et131x_mii_write - Write to a PHY register through the MII interface of the MAC
1472 * @adapter: pointer to our private adapter structure
1473 * @reg: the register to read
1474 * @value: 16-bit value to write
1476 * FIXME: one caller in netdev still
1478 * Return 0 on success, errno on failure (as defined in errno.h)
1480 static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
1482 struct mac_regs __iomem *mac = &adapter->regs->mac;
1483 struct phy_device *phydev = adapter->phydev;
1494 addr = phydev->addr;
1496 /* Save a local copy of the registers we are dealing with so we can
1499 mii_addr = readl(&mac->mii_mgmt_addr);
1500 mii_cmd = readl(&mac->mii_mgmt_cmd);
1502 /* Stop the current operation */
1503 writel(0, &mac->mii_mgmt_cmd);
1505 /* Set up the register we need to write to on the correct PHY */
1506 writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
1508 /* Add the value to write to the registers to the mac */
1509 writel(value, &mac->mii_mgmt_ctrl);
1514 mii_indicator = readl(&mac->mii_mgmt_indicator);
1515 } while ((mii_indicator & MGMT_BUSY) && delay < 100);
1517 /* If we hit the max delay, we could not write the register */
1521 dev_warn(&adapter->pdev->dev,
1522 "reg 0x%08x could not be written", reg);
1523 dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
1525 dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
1526 readl(&mac->mii_mgmt_cmd));
1528 et131x_mii_read(adapter, reg, &tmp);
1532 /* Stop the write operation */
1533 writel(0, &mac->mii_mgmt_cmd);
1536 * set the registers we touched back to the state at which we entered
1539 writel(mii_addr, &mac->mii_mgmt_addr);
1540 writel(mii_cmd, &mac->mii_mgmt_cmd);
1545 /* Still used from _mac for BIT_READ */
1546 static void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
1547 u16 action, u16 regnum, u16 bitnum,
1551 u16 mask = 0x0001 << bitnum;
1553 /* Read the requested register */
1554 et131x_mii_read(adapter, regnum, ®);
1557 case TRUEPHY_BIT_READ:
1558 *value = (reg & mask) >> bitnum;
1561 case TRUEPHY_BIT_SET:
1562 et131x_mii_write(adapter, regnum, reg | mask);
1565 case TRUEPHY_BIT_CLEAR:
1566 et131x_mii_write(adapter, regnum, reg & ~mask);
1574 static void et1310_config_flow_control(struct et131x_adapter *adapter)
1576 struct phy_device *phydev = adapter->phydev;
1578 if (phydev->duplex == DUPLEX_HALF) {
1579 adapter->flowcontrol = FLOW_NONE;
1581 char remote_pause, remote_async_pause;
1583 et1310_phy_access_mii_bit(adapter,
1584 TRUEPHY_BIT_READ, 5, 10, &remote_pause);
1585 et1310_phy_access_mii_bit(adapter,
1586 TRUEPHY_BIT_READ, 5, 11,
1587 &remote_async_pause);
1589 if ((remote_pause == TRUEPHY_BIT_SET) &&
1590 (remote_async_pause == TRUEPHY_BIT_SET)) {
1591 adapter->flowcontrol = adapter->wanted_flow;
1592 } else if ((remote_pause == TRUEPHY_BIT_SET) &&
1593 (remote_async_pause == TRUEPHY_BIT_CLEAR)) {
1594 if (adapter->wanted_flow == FLOW_BOTH)
1595 adapter->flowcontrol = FLOW_BOTH;
1597 adapter->flowcontrol = FLOW_NONE;
1598 } else if ((remote_pause == TRUEPHY_BIT_CLEAR) &&
1599 (remote_async_pause == TRUEPHY_BIT_CLEAR)) {
1600 adapter->flowcontrol = FLOW_NONE;
1601 } else {/* if (remote_pause == TRUEPHY_CLEAR_BIT &&
1602 remote_async_pause == TRUEPHY_SET_BIT) */
1603 if (adapter->wanted_flow == FLOW_BOTH)
1604 adapter->flowcontrol = FLOW_RXONLY;
1606 adapter->flowcontrol = FLOW_NONE;
1612 * et1310_update_macstat_host_counters - Update the local copy of the statistics
1613 * @adapter: pointer to the adapter structure
1615 static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter)
1617 struct ce_stats *stats = &adapter->stats;
1618 struct macstat_regs __iomem *macstat =
1619 &adapter->regs->macstat;
1621 stats->tx_collisions += readl(&macstat->tx_total_collisions);
1622 stats->tx_first_collisions += readl(&macstat->tx_single_collisions);
1623 stats->tx_deferred += readl(&macstat->tx_deferred);
1624 stats->tx_excessive_collisions +=
1625 readl(&macstat->tx_multiple_collisions);
1626 stats->tx_late_collisions += readl(&macstat->tx_late_collisions);
1627 stats->tx_underflows += readl(&macstat->tx_undersize_frames);
1628 stats->tx_max_pkt_errs += readl(&macstat->tx_oversize_frames);
1630 stats->rx_align_errs += readl(&macstat->rx_align_errs);
1631 stats->rx_crc_errs += readl(&macstat->rx_code_errs);
1632 stats->rcvd_pkts_dropped += readl(&macstat->rx_drops);
1633 stats->rx_overflows += readl(&macstat->rx_oversize_packets);
1634 stats->rx_code_violations += readl(&macstat->rx_fcs_errs);
1635 stats->rx_length_errs += readl(&macstat->rx_frame_len_errs);
1636 stats->rx_other_errs += readl(&macstat->rx_fragment_packets);
1640 * et1310_handle_macstat_interrupt
1641 * @adapter: pointer to the adapter structure
1643 * One of the MACSTAT counters has wrapped. Update the local copy of
1644 * the statistics held in the adapter structure, checking the "wrap"
1645 * bit for each counter.
1647 static void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter)
1652 /* Read the interrupt bits from the register(s). These are Clear On
1655 carry_reg1 = readl(&adapter->regs->macstat.carry_reg1);
1656 carry_reg2 = readl(&adapter->regs->macstat.carry_reg2);
1658 writel(carry_reg1, &adapter->regs->macstat.carry_reg1);
1659 writel(carry_reg2, &adapter->regs->macstat.carry_reg2);
1661 /* We need to do update the host copy of all the MAC_STAT counters.
1662 * For each counter, check it's overflow bit. If the overflow bit is
1663 * set, then increment the host version of the count by one complete
1664 * revolution of the counter. This routine is called when the counter
1665 * block indicates that one of the counters has wrapped.
1667 if (carry_reg1 & (1 << 14))
1668 adapter->stats.rx_code_violations += COUNTER_WRAP_16_BIT;
1669 if (carry_reg1 & (1 << 8))
1670 adapter->stats.rx_align_errs += COUNTER_WRAP_12_BIT;
1671 if (carry_reg1 & (1 << 7))
1672 adapter->stats.rx_length_errs += COUNTER_WRAP_16_BIT;
1673 if (carry_reg1 & (1 << 2))
1674 adapter->stats.rx_other_errs += COUNTER_WRAP_16_BIT;
1675 if (carry_reg1 & (1 << 6))
1676 adapter->stats.rx_crc_errs += COUNTER_WRAP_16_BIT;
1677 if (carry_reg1 & (1 << 3))
1678 adapter->stats.rx_overflows += COUNTER_WRAP_16_BIT;
1679 if (carry_reg1 & (1 << 0))
1680 adapter->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT;
1681 if (carry_reg2 & (1 << 16))
1682 adapter->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT;
1683 if (carry_reg2 & (1 << 15))
1684 adapter->stats.tx_underflows += COUNTER_WRAP_12_BIT;
1685 if (carry_reg2 & (1 << 6))
1686 adapter->stats.tx_first_collisions += COUNTER_WRAP_12_BIT;
1687 if (carry_reg2 & (1 << 8))
1688 adapter->stats.tx_deferred += COUNTER_WRAP_12_BIT;
1689 if (carry_reg2 & (1 << 5))
1690 adapter->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT;
1691 if (carry_reg2 & (1 << 4))
1692 adapter->stats.tx_late_collisions += COUNTER_WRAP_12_BIT;
1693 if (carry_reg2 & (1 << 2))
1694 adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT;
1697 static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
1699 struct net_device *netdev = bus->priv;
1700 struct et131x_adapter *adapter = netdev_priv(netdev);
1704 ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value);
1712 static int et131x_mdio_write(struct mii_bus *bus, int phy_addr,
1715 struct net_device *netdev = bus->priv;
1716 struct et131x_adapter *adapter = netdev_priv(netdev);
1718 return et131x_mii_write(adapter, reg, value);
1721 static int et131x_mdio_reset(struct mii_bus *bus)
1723 struct net_device *netdev = bus->priv;
1724 struct et131x_adapter *adapter = netdev_priv(netdev);
1726 et131x_mii_write(adapter, MII_BMCR, BMCR_RESET);
1732 * et1310_phy_power_down - PHY power control
1733 * @adapter: device to control
1734 * @down: true for off/false for back on
1736 * one hundred, ten, one thousand megs
1737 * How would you like to have your LAN accessed
1738 * Can't you see that this code processed
1739 * Phy power, phy power..
1741 static void et1310_phy_power_down(struct et131x_adapter *adapter, bool down)
1745 et131x_mii_read(adapter, MII_BMCR, &data);
1746 data &= ~BMCR_PDOWN;
1749 et131x_mii_write(adapter, MII_BMCR, data);
1753 * et131x_xcvr_init - Init the phy if we are setting it into force mode
1754 * @adapter: pointer to our private adapter structure
1757 static void et131x_xcvr_init(struct et131x_adapter *adapter)
1763 et131x_mii_read(adapter, PHY_INTERRUPT_STATUS, &isr);
1764 et131x_mii_read(adapter, PHY_INTERRUPT_MASK, &imr);
1766 /* Set the link status interrupt only. Bad behavior when link status
1767 * and auto neg are set, we run into a nested interrupt problem
1769 imr |= (ET_PHY_INT_MASK_AUTONEGSTAT |
1770 ET_PHY_INT_MASK_LINKSTAT |
1771 ET_PHY_INT_MASK_ENABLE);
1773 et131x_mii_write(adapter, PHY_INTERRUPT_MASK, imr);
1775 /* Set the LED behavior such that LED 1 indicates speed (off =
1776 * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
1777 * link and activity (on for link, blink off for activity).
1779 * NOTE: Some customizations have been added here for specific
1780 * vendors; The LED behavior is now determined by vendor data in the
1781 * EEPROM. However, the above description is the default.
1783 if ((adapter->eeprom_data[1] & 0x4) == 0) {
1784 et131x_mii_read(adapter, PHY_LED_2, &lcr2);
1786 lcr2 &= (ET_LED2_LED_100TX | ET_LED2_LED_1000T);
1787 lcr2 |= (LED_VAL_LINKON_ACTIVE << LED_LINK_SHIFT);
1789 if ((adapter->eeprom_data[1] & 0x8) == 0)
1790 lcr2 |= (LED_VAL_1000BT_100BTX << LED_TXRX_SHIFT);
1792 lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT);
1794 et131x_mii_write(adapter, PHY_LED_2, lcr2);
1799 * et131x_configure_global_regs - configure JAGCore global regs
1800 * @adapter: pointer to our adapter structure
1802 * Used to configure the global registers on the JAGCore
1804 static void et131x_configure_global_regs(struct et131x_adapter *adapter)
1806 struct global_regs __iomem *regs = &adapter->regs->global;
1808 writel(0, ®s->rxq_start_addr);
1809 writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr);
1811 if (adapter->registry_jumbo_packet < 2048) {
1812 /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
1813 * block of RAM that the driver can split between Tx
1814 * and Rx as it desires. Our default is to split it
1817 writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr);
1818 writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr);
1819 } else if (adapter->registry_jumbo_packet < 8192) {
1820 /* For jumbo packets > 2k but < 8k, split 50-50. */
1821 writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr);
1822 writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr);
1824 /* 9216 is the only packet size greater than 8k that
1825 * is available. The Tx buffer has to be big enough
1826 * for one whole packet on the Tx side. We'll make
1827 * the Tx 9408, and give the rest to Rx
1829 writel(0x01b3, ®s->rxq_end_addr);
1830 writel(0x01b4, ®s->txq_start_addr);
1833 /* Initialize the loopback register. Disable all loopbacks. */
1834 writel(0, ®s->loopback);
1837 writel(0, ®s->msi_config);
1839 /* By default, disable the watchdog timer. It will be enabled when
1840 * a packet is queued.
1842 writel(0, ®s->watchdog_timer);
1846 * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
1847 * @adapter: pointer to our adapter structure
1849 static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
1851 struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
1852 struct rx_ring *rx_local = &adapter->rx_ring;
1853 struct fbr_desc *fbr_entry;
1856 unsigned long flags;
1858 /* Halt RXDMA to perform the reconfigure. */
1859 et131x_rx_dma_disable(adapter);
1861 /* Load the completion writeback physical address
1863 * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
1864 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
1865 * are ever returned, make sure the high part is retrieved here
1866 * before storing the adjusted address.
1868 writel((u32) ((u64)rx_local->rx_status_bus >> 32),
1869 &rx_dma->dma_wb_base_hi);
1870 writel((u32) rx_local->rx_status_bus, &rx_dma->dma_wb_base_lo);
1872 memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block));
1874 /* Set the address and parameters of the packet status ring into the
1877 writel((u32) ((u64)rx_local->ps_ring_physaddr >> 32),
1878 &rx_dma->psr_base_hi);
1879 writel((u32) rx_local->ps_ring_physaddr, &rx_dma->psr_base_lo);
1880 writel(rx_local->psr_num_entries - 1, &rx_dma->psr_num_des);
1881 writel(0, &rx_dma->psr_full_offset);
1883 psr_num_des = readl(&rx_dma->psr_num_des) & 0xFFF;
1884 writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100,
1885 &rx_dma->psr_min_des);
1887 spin_lock_irqsave(&adapter->rcv_lock, flags);
1889 /* These local variables track the PSR in the adapter structure */
1890 rx_local->local_psr_full = 0;
1892 /* Now's the best time to initialize FBR1 contents */
1893 fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr;
1894 for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) {
1895 fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry];
1896 fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry];
1897 fbr_entry->word2 = entry;
1901 /* Set the address and parameters of Free buffer ring 1 (and 0 if
1902 * required) into the 1310's registers
1904 writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
1905 &rx_dma->fbr1_base_hi);
1906 writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
1907 writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
1908 writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
1910 /* This variable tracks the free buffer ring 1 full position, so it
1911 * has to match the above.
1913 rx_local->fbr[0]->local_full = ET_DMA10_WRAP;
1915 ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
1916 &rx_dma->fbr1_min_des);
1919 /* Now's the best time to initialize FBR0 contents */
1920 fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
1921 for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
1922 fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry];
1923 fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry];
1924 fbr_entry->word2 = entry;
1928 writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
1929 &rx_dma->fbr0_base_hi);
1930 writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
1931 writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
1932 writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
1934 /* This variable tracks the free buffer ring 0 full position, so it
1935 * has to match the above.
1937 rx_local->fbr[1]->local_full = ET_DMA10_WRAP;
1939 ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
1940 &rx_dma->fbr0_min_des);
1943 /* Program the number of packets we will receive before generating an
1945 * For version B silicon, this value gets updated once autoneg is
1948 writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done);
1950 /* The "time_done" is not working correctly to coalesce interrupts
1951 * after a given time period, but rather is giving us an interrupt
1952 * regardless of whether we have received packets.
1953 * This value gets updated once autoneg is complete.
1955 writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time);
1957 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
1961 * et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore.
1962 * @adapter: pointer to our private adapter structure
1964 * Configure the transmit engine with the ring buffers we have created
1965 * and prepare it for use.
1967 static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter)
1969 struct txdma_regs __iomem *txdma = &adapter->regs->txdma;
1971 /* Load the hardware with the start of the transmit descriptor ring. */
1972 writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32),
1973 &txdma->pr_base_hi);
1974 writel((u32) adapter->tx_ring.tx_desc_ring_pa,
1975 &txdma->pr_base_lo);
1977 /* Initialise the transmit DMA engine */
1978 writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des);
1980 /* Load the completion writeback physical address */
1981 writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32),
1982 &txdma->dma_wb_base_hi);
1983 writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo);
1985 *adapter->tx_ring.tx_status = 0;
1987 writel(0, &txdma->service_request);
1988 adapter->tx_ring.send_idx = 0;
1992 * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
1993 * @adapter: pointer to our private adapter structure
1995 * Returns 0 on success, errno on failure (as defined in errno.h)
1997 static void et131x_adapter_setup(struct et131x_adapter *adapter)
1999 /* Configure the JAGCore */
2000 et131x_configure_global_regs(adapter);
2002 et1310_config_mac_regs1(adapter);
2004 /* Configure the MMC registers */
2005 /* All we need to do is initialize the Memory Control Register */
2006 writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl);
2008 et1310_config_rxmac_regs(adapter);
2009 et1310_config_txmac_regs(adapter);
2011 et131x_config_rx_dma_regs(adapter);
2012 et131x_config_tx_dma_regs(adapter);
2014 et1310_config_macstat_regs(adapter);
2016 et1310_phy_power_down(adapter, 0);
2017 et131x_xcvr_init(adapter);
2021 * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
2022 * @adapter: pointer to our private adapter structure
2024 static void et131x_soft_reset(struct et131x_adapter *adapter)
2026 /* Disable MAC Core */
2027 writel(0xc00f0000, &adapter->regs->mac.cfg1);
2029 /* Set everything to a reset value */
2030 writel(0x7F, &adapter->regs->global.sw_reset);
2031 writel(0x000f0000, &adapter->regs->mac.cfg1);
2032 writel(0x00000000, &adapter->regs->mac.cfg1);
2036 * et131x_enable_interrupts - enable interrupt
2037 * @adapter: et131x device
2039 * Enable the appropriate interrupts on the ET131x according to our
2042 static void et131x_enable_interrupts(struct et131x_adapter *adapter)
2046 /* Enable all global interrupts */
2047 if (adapter->flowcontrol == FLOW_TXONLY ||
2048 adapter->flowcontrol == FLOW_BOTH)
2049 mask = INT_MASK_ENABLE;
2051 mask = INT_MASK_ENABLE_NO_FLOW;
2053 writel(mask, &adapter->regs->global.int_mask);
2057 * et131x_disable_interrupts - interrupt disable
2058 * @adapter: et131x device
2060 * Block all interrupts from the et131x device at the device itself
2062 static void et131x_disable_interrupts(struct et131x_adapter *adapter)
2064 /* Disable all global interrupts */
2065 writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask);
2069 * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
2070 * @adapter: pointer to our adapter structure
2072 static void et131x_tx_dma_disable(struct et131x_adapter *adapter)
2074 /* Setup the tramsmit dma configuration register */
2075 writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT,
2076 &adapter->regs->txdma.csr);
2080 * et131x_enable_txrx - Enable tx/rx queues
2081 * @netdev: device to be enabled
2083 static void et131x_enable_txrx(struct net_device *netdev)
2085 struct et131x_adapter *adapter = netdev_priv(netdev);
2087 /* Enable the Tx and Rx DMA engines (if not already enabled) */
2088 et131x_rx_dma_enable(adapter);
2089 et131x_tx_dma_enable(adapter);
2091 /* Enable device interrupts */
2092 if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)
2093 et131x_enable_interrupts(adapter);
2095 /* We're ready to move some data, so start the queue */
2096 netif_start_queue(netdev);
2100 * et131x_disable_txrx - Disable tx/rx queues
2101 * @netdev: device to be disabled
2103 static void et131x_disable_txrx(struct net_device *netdev)
2105 struct et131x_adapter *adapter = netdev_priv(netdev);
2107 /* First thing is to stop the queue */
2108 netif_stop_queue(netdev);
2110 /* Stop the Tx and Rx DMA engines */
2111 et131x_rx_dma_disable(adapter);
2112 et131x_tx_dma_disable(adapter);
2114 /* Disable device interrupts */
2115 et131x_disable_interrupts(adapter);
2119 * et131x_init_send - Initialize send data structures
2120 * @adapter: pointer to our private adapter structure
2122 static void et131x_init_send(struct et131x_adapter *adapter)
2126 struct tx_ring *tx_ring;
2128 /* Setup some convenience pointers */
2129 tx_ring = &adapter->tx_ring;
2130 tcb = adapter->tx_ring.tcb_ring;
2132 tx_ring->tcb_qhead = tcb;
2134 memset(tcb, 0, sizeof(struct tcb) * NUM_TCB);
2136 /* Go through and set up each TCB */
2137 for (ct = 0; ct++ < NUM_TCB; tcb++)
2138 /* Set the link pointer in HW TCB to the next TCB in the
2141 tcb->next = tcb + 1;
2143 /* Set the tail pointer */
2145 tx_ring->tcb_qtail = tcb;
2147 /* Curr send queue should now be empty */
2148 tx_ring->send_head = NULL;
2149 tx_ring->send_tail = NULL;
2153 * et1310_enable_phy_coma - called when network cable is unplugged
2154 * @adapter: pointer to our adapter structure
2156 * driver receive an phy status change interrupt while in D0 and check that
2157 * phy_status is down.
2159 * -- gate off JAGCore;
2160 * -- set gigE PHY in Coma mode
2161 * -- wake on phy_interrupt; Perform software reset JAGCore,
2162 * re-initialize jagcore and gigE PHY
2164 * Add D0-ASPM-PhyLinkDown Support:
2165 * -- while in D0, when there is a phy_interrupt indicating phy link
2166 * down status, call the MPSetPhyComa routine to enter this active
2167 * state power saving mode
2168 * -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt
2169 * indicating linkup status, call the MPDisablePhyComa routine to
2170 * restore JAGCore and gigE PHY
2172 static void et1310_enable_phy_coma(struct et131x_adapter *adapter)
2174 unsigned long flags;
2177 pmcsr = readl(&adapter->regs->global.pm_csr);
2179 /* Save the GbE PHY speed and duplex modes. Need to restore this
2180 * when cable is plugged back in
2183 * TODO - when PM is re-enabled, check if we need to
2184 * perform a similar task as this -
2185 * adapter->pdown_speed = adapter->ai_force_speed;
2186 * adapter->pdown_duplex = adapter->ai_force_duplex;
2189 /* Stop sending packets. */
2190 spin_lock_irqsave(&adapter->send_hw_lock, flags);
2191 adapter->flags |= fMP_ADAPTER_LOWER_POWER;
2192 spin_unlock_irqrestore(&adapter->send_hw_lock, flags);
2194 /* Wait for outstanding Receive packets */
2196 et131x_disable_txrx(adapter->netdev);
2198 /* Gate off JAGCore 3 clock domains */
2199 pmcsr &= ~ET_PMCSR_INIT;
2200 writel(pmcsr, &adapter->regs->global.pm_csr);
2202 /* Program gigE PHY in to Coma mode */
2203 pmcsr |= ET_PM_PHY_SW_COMA;
2204 writel(pmcsr, &adapter->regs->global.pm_csr);
2208 * et1310_disable_phy_coma - Disable the Phy Coma Mode
2209 * @adapter: pointer to our adapter structure
2211 static void et1310_disable_phy_coma(struct et131x_adapter *adapter)
2215 pmcsr = readl(&adapter->regs->global.pm_csr);
2217 /* Disable phy_sw_coma register and re-enable JAGCore clocks */
2218 pmcsr |= ET_PMCSR_INIT;
2219 pmcsr &= ~ET_PM_PHY_SW_COMA;
2220 writel(pmcsr, &adapter->regs->global.pm_csr);
2222 /* Restore the GbE PHY speed and duplex modes;
2223 * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
2225 /* TODO - when PM is re-enabled, check if we need to
2226 * perform a similar task as this -
2227 * adapter->ai_force_speed = adapter->pdown_speed;
2228 * adapter->ai_force_duplex = adapter->pdown_duplex;
2231 /* Re-initialize the send structures */
2232 et131x_init_send(adapter);
2234 /* Bring the device back to the state it was during init prior to
2235 * autonegotiation being complete. This way, when we get the auto-neg
2236 * complete interrupt, we can complete init by calling ConfigMacREGS2.
2238 et131x_soft_reset(adapter);
2240 /* setup et1310 as per the documentation ?? */
2241 et131x_adapter_setup(adapter);
2243 /* Allow Tx to restart */
2244 adapter->flags &= ~fMP_ADAPTER_LOWER_POWER;
2246 et131x_enable_txrx(adapter->netdev);
2249 static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit)
2251 u32 tmp_free_buff_ring = *free_buff_ring;
2252 tmp_free_buff_ring++;
2253 /* This works for all cases where limit < 1024. The 1023 case
2254 works because 1023++ is 1024 which means the if condition is not
2255 taken but the carry of the bit into the wrap bit toggles the wrap
2257 if ((tmp_free_buff_ring & ET_DMA10_MASK) > limit) {
2258 tmp_free_buff_ring &= ~ET_DMA10_MASK;
2259 tmp_free_buff_ring ^= ET_DMA10_WRAP;
2261 /* For the 1023 case */
2262 tmp_free_buff_ring &= (ET_DMA10_MASK|ET_DMA10_WRAP);
2263 *free_buff_ring = tmp_free_buff_ring;
2264 return tmp_free_buff_ring;
2268 * et131x_align_allocated_memory - Align allocated memory on a given boundary
2269 * @adapter: pointer to our adapter structure
2270 * @phys_addr: pointer to Physical address
2271 * @offset: pointer to the offset variable
2272 * @mask: correct mask
2274 static void et131x_align_allocated_memory(struct et131x_adapter *adapter,
2275 u64 *phys_addr, u64 *offset,
2278 u64 new_addr = *phys_addr & ~mask;
2282 if (new_addr != *phys_addr) {
2283 /* Move to next aligned block */
2284 new_addr += mask + 1;
2285 /* Return offset for adjusting virt addr */
2286 *offset = new_addr - *phys_addr;
2287 /* Return new physical address */
2288 *phys_addr = new_addr;
2293 * et131x_rx_dma_memory_alloc
2294 * @adapter: pointer to our private adapter structure
2296 * Returns 0 on success and errno on failure (as defined in errno.h)
2298 * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required,
2299 * and the Packet Status Ring.
2301 static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
2305 u32 pktstat_ringsize, fbr_chunksize;
2306 struct rx_ring *rx_ring;
2308 /* Setup some convenience pointers */
2309 rx_ring = &adapter->rx_ring;
2311 /* Alloc memory for the lookup table */
2313 rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
2315 rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
2317 /* The first thing we will do is configure the sizes of the buffer
2318 * rings. These will change based on jumbo packet support. Larger
2319 * jumbo packets increases the size of each entry in FBR0, and the
2320 * number of entries in FBR0, while at the same time decreasing the
2321 * number of entries in FBR1.
2323 * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1
2324 * entries are huge in order to accommodate a "jumbo" frame, then it
2325 * will have less entries. Conversely, FBR1 will now be relied upon
2326 * to carry more "normal" frames, thus it's entry size also increases
2327 * and the number of entries goes up too (since it now carries
2328 * "small" + "regular" packets.
2330 * In this scheme, we try to maintain 512 entries between the two
2331 * rings. Also, FBR1 remains a constant size - when it's size doubles
2332 * the number of entries halves. FBR0 increases in size, however.
2335 if (adapter->registry_jumbo_packet < 2048) {
2337 rx_ring->fbr[1]->buffsize = 256;
2338 rx_ring->fbr[1]->num_entries = 512;
2340 rx_ring->fbr[0]->buffsize = 2048;
2341 rx_ring->fbr[0]->num_entries = 512;
2342 } else if (adapter->registry_jumbo_packet < 4096) {
2344 rx_ring->fbr[1]->buffsize = 512;
2345 rx_ring->fbr[1]->num_entries = 1024;
2347 rx_ring->fbr[0]->buffsize = 4096;
2348 rx_ring->fbr[0]->num_entries = 512;
2351 rx_ring->fbr[1]->buffsize = 1024;
2352 rx_ring->fbr[1]->num_entries = 768;
2354 rx_ring->fbr[0]->buffsize = 16384;
2355 rx_ring->fbr[0]->num_entries = 128;
2359 adapter->rx_ring.psr_num_entries =
2360 adapter->rx_ring.fbr[1]->num_entries +
2361 adapter->rx_ring.fbr[0]->num_entries;
2363 adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[0]->num_entries;
2366 /* Allocate an area of memory for Free Buffer Ring 1 */
2367 bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
2369 rx_ring->fbr[0]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2371 &rx_ring->fbr[0]->ring_physaddr,
2373 if (!rx_ring->fbr[0]->ring_virtaddr) {
2374 dev_err(&adapter->pdev->dev,
2375 "Cannot alloc memory for Free Buffer Ring 1\n");
2379 /* Save physical address
2381 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
2382 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2383 * are ever returned, make sure the high part is retrieved here
2384 * before storing the adjusted address.
2386 rx_ring->fbr[0]->real_physaddr = rx_ring->fbr[0]->ring_physaddr;
2388 /* Align Free Buffer Ring 1 on a 4K boundary */
2389 et131x_align_allocated_memory(adapter,
2390 &rx_ring->fbr[0]->real_physaddr,
2391 &rx_ring->fbr[0]->offset, 0x0FFF);
2393 rx_ring->fbr[0]->ring_virtaddr =
2394 (void *)((u8 *) rx_ring->fbr[0]->ring_virtaddr +
2395 rx_ring->fbr[0]->offset);
2398 /* Allocate an area of memory for Free Buffer Ring 0 */
2399 bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
2401 rx_ring->fbr[1]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2403 &rx_ring->fbr[1]->ring_physaddr,
2405 if (!rx_ring->fbr[1]->ring_virtaddr) {
2406 dev_err(&adapter->pdev->dev,
2407 "Cannot alloc memory for Free Buffer Ring 0\n");
2411 /* Save physical address
2413 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
2414 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2415 * are ever returned, make sure the high part is retrieved here before
2416 * storing the adjusted address.
2418 rx_ring->fbr[1]->real_physaddr = rx_ring->fbr[1]->ring_physaddr;
2420 /* Align Free Buffer Ring 0 on a 4K boundary */
2421 et131x_align_allocated_memory(adapter,
2422 &rx_ring->fbr[1]->real_physaddr,
2423 &rx_ring->fbr[1]->offset, 0x0FFF);
2425 rx_ring->fbr[1]->ring_virtaddr =
2426 (void *)((u8 *) rx_ring->fbr[1]->ring_virtaddr +
2427 rx_ring->fbr[1]->offset);
2429 for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) {
2430 u64 fbr1_tmp_physaddr;
2434 /* This code allocates an area of memory big enough for N
2435 * free buffers + (buffer_size - 1) so that the buffers can
2436 * be aligned on 4k boundaries. If each buffer were aligned
2437 * to a buffer_size boundary, the effect would be to double
2438 * the size of FBR0. By allocating N buffers at once, we
2439 * reduce this overhead.
2441 if (rx_ring->fbr[0]->buffsize > 4096)
2444 fbr1_align = rx_ring->fbr[0]->buffsize;
2447 (FBR_CHUNKS * rx_ring->fbr[0]->buffsize) + fbr1_align - 1;
2448 rx_ring->fbr[0]->mem_virtaddrs[i] =
2449 dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
2450 &rx_ring->fbr[0]->mem_physaddrs[i],
2453 if (!rx_ring->fbr[0]->mem_virtaddrs[i]) {
2454 dev_err(&adapter->pdev->dev,
2455 "Could not alloc memory\n");
2459 /* See NOTE in "Save Physical Address" comment above */
2460 fbr1_tmp_physaddr = rx_ring->fbr[0]->mem_physaddrs[i];
2462 et131x_align_allocated_memory(adapter,
2464 &fbr1_offset, (fbr1_align - 1));
2466 for (j = 0; j < FBR_CHUNKS; j++) {
2467 u32 index = (i * FBR_CHUNKS) + j;
2469 /* Save the Virtual address of this index for quick
2472 rx_ring->fbr[0]->virt[index] =
2473 (u8 *) rx_ring->fbr[0]->mem_virtaddrs[i] +
2474 (j * rx_ring->fbr[0]->buffsize) + fbr1_offset;
2476 /* now store the physical address in the descriptor
2477 * so the device can access it
2479 rx_ring->fbr[0]->bus_high[index] =
2480 (u32) (fbr1_tmp_physaddr >> 32);
2481 rx_ring->fbr[0]->bus_low[index] =
2482 (u32) fbr1_tmp_physaddr;
2484 fbr1_tmp_physaddr += rx_ring->fbr[0]->buffsize;
2486 rx_ring->fbr[0]->buffer1[index] =
2487 rx_ring->fbr[0]->virt[index];
2488 rx_ring->fbr[0]->buffer2[index] =
2489 rx_ring->fbr[0]->virt[index] - 4;
2494 /* Same for FBR0 (if in use) */
2495 for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) {
2496 u64 fbr0_tmp_physaddr;
2500 ((FBR_CHUNKS + 1) * rx_ring->fbr[1]->buffsize) - 1;
2501 rx_ring->fbr[1]->mem_virtaddrs[i] =
2502 dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
2503 &rx_ring->fbr[1]->mem_physaddrs[i],
2506 if (!rx_ring->fbr[1]->mem_virtaddrs[i]) {
2507 dev_err(&adapter->pdev->dev,
2508 "Could not alloc memory\n");
2512 /* See NOTE in "Save Physical Address" comment above */
2513 fbr0_tmp_physaddr = rx_ring->fbr[1]->mem_physaddrs[i];
2515 et131x_align_allocated_memory(adapter,
2518 rx_ring->fbr[1]->buffsize - 1);
2520 for (j = 0; j < FBR_CHUNKS; j++) {
2521 u32 index = (i * FBR_CHUNKS) + j;
2523 rx_ring->fbr[1]->virt[index] =
2524 (u8 *) rx_ring->fbr[1]->mem_virtaddrs[i] +
2525 (j * rx_ring->fbr[1]->buffsize) + fbr0_offset;
2527 rx_ring->fbr[1]->bus_high[index] =
2528 (u32) (fbr0_tmp_physaddr >> 32);
2529 rx_ring->fbr[1]->bus_low[index] =
2530 (u32) fbr0_tmp_physaddr;
2532 fbr0_tmp_physaddr += rx_ring->fbr[1]->buffsize;
2534 rx_ring->fbr[1]->buffer1[index] =
2535 rx_ring->fbr[1]->virt[index];
2536 rx_ring->fbr[1]->buffer2[index] =
2537 rx_ring->fbr[1]->virt[index] - 4;
2542 /* Allocate an area of memory for FIFO of Packet Status ring entries */
2544 sizeof(struct pkt_stat_desc) * adapter->rx_ring.psr_num_entries;
2546 rx_ring->ps_ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2548 &rx_ring->ps_ring_physaddr,
2551 if (!rx_ring->ps_ring_virtaddr) {
2552 dev_err(&adapter->pdev->dev,
2553 "Cannot alloc memory for Packet Status Ring\n");
2556 printk(KERN_INFO "Packet Status Ring %lx\n",
2557 (unsigned long) rx_ring->ps_ring_physaddr);
2560 * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
2561 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2562 * are ever returned, make sure the high part is retrieved here before
2563 * storing the adjusted address.
2566 /* Allocate an area of memory for writeback of status information */
2567 rx_ring->rx_status_block = dma_alloc_coherent(&adapter->pdev->dev,
2568 sizeof(struct rx_status_block),
2569 &rx_ring->rx_status_bus,
2571 if (!rx_ring->rx_status_block) {
2572 dev_err(&adapter->pdev->dev,
2573 "Cannot alloc memory for Status Block\n");
2576 rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD;
2577 printk(KERN_INFO "PRS %lx\n", (unsigned long)rx_ring->rx_status_bus);
2580 * kmem_cache_create initializes a lookaside list. After successful
2581 * creation, nonpaged fixed-size blocks can be allocated from and
2582 * freed to the lookaside list.
2583 * RFDs will be allocated from this pool.
2585 rx_ring->recv_lookaside = kmem_cache_create(adapter->netdev->name,
2592 adapter->flags |= fMP_ADAPTER_RECV_LOOKASIDE;
2594 /* The RFDs are going to be put on lists later on, so initialize the
2597 INIT_LIST_HEAD(&rx_ring->recv_list);
2602 * et131x_rx_dma_memory_free - Free all memory allocated within this module.
2603 * @adapter: pointer to our private adapter structure
2605 static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
2609 u32 pktstat_ringsize;
2611 struct rx_ring *rx_ring;
2613 /* Setup some convenience pointers */
2614 rx_ring = &adapter->rx_ring;
2616 /* Free RFDs and associated packet descriptors */
2617 WARN_ON(rx_ring->num_ready_recv != rx_ring->num_rfd);
2619 while (!list_empty(&rx_ring->recv_list)) {
2620 rfd = (struct rfd *) list_entry(rx_ring->recv_list.next,
2621 struct rfd, list_node);
2623 list_del(&rfd->list_node);
2625 kmem_cache_free(adapter->rx_ring.recv_lookaside, rfd);
2628 /* Free Free Buffer Ring 1 */
2629 if (rx_ring->fbr[0]->ring_virtaddr) {
2630 /* First the packet memory */
2631 for (index = 0; index <
2632 (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); index++) {
2633 if (rx_ring->fbr[0]->mem_virtaddrs[index]) {
2636 if (rx_ring->fbr[0]->buffsize > 4096)
2639 fbr1_align = rx_ring->fbr[0]->buffsize;
2642 (rx_ring->fbr[0]->buffsize * FBR_CHUNKS) +
2645 dma_free_coherent(&adapter->pdev->dev,
2647 rx_ring->fbr[0]->mem_virtaddrs[index],
2648 rx_ring->fbr[0]->mem_physaddrs[index]);
2650 rx_ring->fbr[0]->mem_virtaddrs[index] = NULL;
2654 /* Now the FIFO itself */
2655 rx_ring->fbr[0]->ring_virtaddr = (void *)((u8 *)
2656 rx_ring->fbr[0]->ring_virtaddr - rx_ring->fbr[0]->offset);
2659 (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
2662 dma_free_coherent(&adapter->pdev->dev, bufsize,
2663 rx_ring->fbr[0]->ring_virtaddr,
2664 rx_ring->fbr[0]->ring_physaddr);
2666 rx_ring->fbr[0]->ring_virtaddr = NULL;
2670 /* Now the same for Free Buffer Ring 0 */
2671 if (rx_ring->fbr[1]->ring_virtaddr) {
2672 /* First the packet memory */
2673 for (index = 0; index <
2674 (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); index++) {
2675 if (rx_ring->fbr[1]->mem_virtaddrs[index]) {
2677 (rx_ring->fbr[1]->buffsize *
2678 (FBR_CHUNKS + 1)) - 1;
2680 dma_free_coherent(&adapter->pdev->dev,
2682 rx_ring->fbr[1]->mem_virtaddrs[index],
2683 rx_ring->fbr[1]->mem_physaddrs[index]);
2685 rx_ring->fbr[1]->mem_virtaddrs[index] = NULL;
2689 /* Now the FIFO itself */
2690 rx_ring->fbr[1]->ring_virtaddr = (void *)((u8 *)
2691 rx_ring->fbr[1]->ring_virtaddr - rx_ring->fbr[1]->offset);
2694 (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
2697 dma_free_coherent(&adapter->pdev->dev,
2699 rx_ring->fbr[1]->ring_virtaddr,
2700 rx_ring->fbr[1]->ring_physaddr);
2702 rx_ring->fbr[1]->ring_virtaddr = NULL;
2706 /* Free Packet Status Ring */
2707 if (rx_ring->ps_ring_virtaddr) {
2709 sizeof(struct pkt_stat_desc) *
2710 adapter->rx_ring.psr_num_entries;
2712 dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize,
2713 rx_ring->ps_ring_virtaddr,
2714 rx_ring->ps_ring_physaddr);
2716 rx_ring->ps_ring_virtaddr = NULL;
2719 /* Free area of memory for the writeback of status information */
2720 if (rx_ring->rx_status_block) {
2721 dma_free_coherent(&adapter->pdev->dev,
2722 sizeof(struct rx_status_block),
2723 rx_ring->rx_status_block, rx_ring->rx_status_bus);
2724 rx_ring->rx_status_block = NULL;
2727 /* Destroy the lookaside (RFD) pool */
2728 if (adapter->flags & fMP_ADAPTER_RECV_LOOKASIDE) {
2729 kmem_cache_destroy(rx_ring->recv_lookaside);
2730 adapter->flags &= ~fMP_ADAPTER_RECV_LOOKASIDE;
2733 /* Free the FBR Lookup Table */
2735 kfree(rx_ring->fbr[1]);
2738 kfree(rx_ring->fbr[0]);
2740 /* Reset Counters */
2741 rx_ring->num_ready_recv = 0;
2745 * et131x_init_recv - Initialize receive data structures.
2746 * @adapter: pointer to our private adapter structure
2748 * Returns 0 on success and errno on failure (as defined in errno.h)
2750 static int et131x_init_recv(struct et131x_adapter *adapter)
2752 int status = -ENOMEM;
2753 struct rfd *rfd = NULL;
2756 struct rx_ring *rx_ring;
2758 /* Setup some convenience pointers */
2759 rx_ring = &adapter->rx_ring;
2761 /* Setup each RFD */
2762 for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) {
2763 rfd = kmem_cache_alloc(rx_ring->recv_lookaside,
2764 GFP_ATOMIC | GFP_DMA);
2767 dev_err(&adapter->pdev->dev,
2768 "Couldn't alloc RFD out of kmem_cache\n");
2775 /* Add this RFD to the recv_list */
2776 list_add_tail(&rfd->list_node, &rx_ring->recv_list);
2778 /* Increment both the available RFD's, and the total RFD's. */
2779 rx_ring->num_ready_recv++;
2783 if (numrfd > NIC_MIN_NUM_RFD)
2786 rx_ring->num_rfd = numrfd;
2789 kmem_cache_free(rx_ring->recv_lookaside, rfd);
2790 dev_err(&adapter->pdev->dev,
2791 "Allocation problems in et131x_init_recv\n");
2797 * et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate.
2798 * @adapter: pointer to our adapter structure
2800 static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter)
2802 struct phy_device *phydev = adapter->phydev;
2807 /* For version B silicon, we do not use the RxDMA timer for 10 and 100
2808 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
2810 if ((phydev->speed == SPEED_100) || (phydev->speed == SPEED_10)) {
2811 writel(0, &adapter->regs->rxdma.max_pkt_time);
2812 writel(1, &adapter->regs->rxdma.num_pkt_done);
2817 * NICReturnRFD - Recycle a RFD and put it back onto the receive list
2818 * @adapter: pointer to our adapter
2819 * @rfd: pointer to the RFD
2821 static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
2823 struct rx_ring *rx_local = &adapter->rx_ring;
2824 struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
2825 u16 buff_index = rfd->bufferindex;
2826 u8 ring_index = rfd->ringindex;
2827 unsigned long flags;
2829 /* We don't use any of the OOB data besides status. Otherwise, we
2830 * need to clean up OOB data
2834 (ring_index == 0 && buff_index < rx_local->fbr[1]->num_entries) ||
2836 (ring_index == 1 && buff_index < rx_local->fbr[0]->num_entries)) {
2837 spin_lock_irqsave(&adapter->fbr_lock, flags);
2839 if (ring_index == 1) {
2840 struct fbr_desc *next = (struct fbr_desc *)
2841 (rx_local->fbr[0]->ring_virtaddr) +
2842 INDEX10(rx_local->fbr[0]->local_full);
2844 /* Handle the Free Buffer Ring advancement here. Write
2845 * the PA / Buffer Index for the returned buffer into
2846 * the oldest (next to be freed)FBR entry
2848 next->addr_hi = rx_local->fbr[0]->bus_high[buff_index];
2849 next->addr_lo = rx_local->fbr[0]->bus_low[buff_index];
2850 next->word2 = buff_index;
2852 writel(bump_free_buff_ring(
2853 &rx_local->fbr[0]->local_full,
2854 rx_local->fbr[0]->num_entries - 1),
2855 &rx_dma->fbr1_full_offset);
2859 struct fbr_desc *next = (struct fbr_desc *)
2860 rx_local->fbr[1]->ring_virtaddr +
2861 INDEX10(rx_local->fbr[1]->local_full);
2863 /* Handle the Free Buffer Ring advancement here. Write
2864 * the PA / Buffer Index for the returned buffer into
2865 * the oldest (next to be freed) FBR entry
2867 next->addr_hi = rx_local->fbr[1]->bus_high[buff_index];
2868 next->addr_lo = rx_local->fbr[1]->bus_low[buff_index];
2869 next->word2 = buff_index;
2871 writel(bump_free_buff_ring(
2872 &rx_local->fbr[1]->local_full,
2873 rx_local->fbr[1]->num_entries - 1),
2874 &rx_dma->fbr0_full_offset);
2877 spin_unlock_irqrestore(&adapter->fbr_lock, flags);
2879 dev_err(&adapter->pdev->dev,
2880 "%s illegal Buffer Index returned\n", __func__);
2883 /* The processing on this RFD is done, so put it back on the tail of
2886 spin_lock_irqsave(&adapter->rcv_lock, flags);
2887 list_add_tail(&rfd->list_node, &rx_local->recv_list);
2888 rx_local->num_ready_recv++;
2889 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
2891 WARN_ON(rx_local->num_ready_recv > rx_local->num_rfd);
2895 * nic_rx_pkts - Checks the hardware for available packets
2896 * @adapter: pointer to our adapter
2898 * Returns rfd, a pointer to our MPRFD.
2900 * Checks the hardware for available packets, using completion ring
2901 * If packets are available, it gets an RFD from the recv_list, attaches
2902 * the packet to it, puts the RFD in the RecvPendList, and also returns
2903 * the pointer to the RFD.
2905 static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter)
2907 struct rx_ring *rx_local = &adapter->rx_ring;
2908 struct rx_status_block *status;
2909 struct pkt_stat_desc *psr;
2913 unsigned long flags;
2914 struct list_head *element;
2921 /* RX Status block is written by the DMA engine prior to every
2922 * interrupt. It contains the next to be used entry in the Packet
2923 * Status Ring, and also the two Free Buffer rings.
2925 status = rx_local->rx_status_block;
2926 word1 = status->word1 >> 16; /* Get the useful bits */
2928 /* Check the PSR and wrap bits do not match */
2929 if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF))
2930 /* Looks like this ring is not updated yet */
2933 /* The packet status ring indicates that data is available. */
2934 psr = (struct pkt_stat_desc *) (rx_local->ps_ring_virtaddr) +
2935 (rx_local->local_psr_full & 0xFFF);
2937 /* Grab any information that is required once the PSR is
2938 * advanced, since we can no longer rely on the memory being
2941 len = psr->word1 & 0xFFFF;
2942 ring_index = (psr->word1 >> 26) & 0x03;
2943 buff_index = (psr->word1 >> 16) & 0x3FF;
2946 /* Indicate that we have used this PSR entry. */
2948 add_12bit(&rx_local->local_psr_full, 1);
2950 (rx_local->local_psr_full & 0xFFF) > rx_local->psr_num_entries - 1) {
2951 /* Clear psr full and toggle the wrap bit */
2952 rx_local->local_psr_full &= ~0xFFF;
2953 rx_local->local_psr_full ^= 0x1000;
2956 writel(rx_local->local_psr_full,
2957 &adapter->regs->rxdma.psr_full_offset);
2960 if (ring_index != 1)
2965 if (ring_index > 1 ||
2967 buff_index > rx_local->fbr[1]->num_entries - 1) ||
2969 buff_index > rx_local->fbr[0]->num_entries - 1)) {
2971 if (ring_index != 1 || buff_index > rx_local->fbr[0]->num_entries - 1) {
2973 /* Illegal buffer or ring index cannot be used by S/W*/
2974 dev_err(&adapter->pdev->dev,
2975 "NICRxPkts PSR Entry %d indicates "
2976 "length of %d and/or bad bi(%d)\n",
2977 rx_local->local_psr_full & 0xFFF,
2982 /* Get and fill the RFD. */
2983 spin_lock_irqsave(&adapter->rcv_lock, flags);
2986 element = rx_local->recv_list.next;
2987 rfd = (struct rfd *) list_entry(element, struct rfd, list_node);
2990 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
2994 list_del(&rfd->list_node);
2995 rx_local->num_ready_recv--;
2997 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
2999 rfd->bufferindex = buff_index;
3000 rfd->ringindex = ring_index;
3002 /* In V1 silicon, there is a bug which screws up filtering of
3003 * runt packets. Therefore runt packet filtering is disabled
3004 * in the MAC and the packets are dropped here. They are
3005 * also counted here.
3007 if (len < (NIC_MIN_PACKET_SIZE + 4)) {
3008 adapter->stats.rx_other_errs++;
3013 /* Determine if this is a multicast packet coming in */
3014 if ((word0 & ALCATEL_MULTICAST_PKT) &&
3015 !(word0 & ALCATEL_BROADCAST_PKT)) {
3016 /* Promiscuous mode and Multicast mode are
3017 * not mutually exclusive as was first
3018 * thought. I guess Promiscuous is just
3019 * considered a super-set of the other
3020 * filters. Generally filter is 0x2b when in
3023 if ((adapter->packet_filter &
3024 ET131X_PACKET_TYPE_MULTICAST)
3025 && !(adapter->packet_filter &
3026 ET131X_PACKET_TYPE_PROMISCUOUS)
3027 && !(adapter->packet_filter &
3028 ET131X_PACKET_TYPE_ALL_MULTICAST)) {
3030 * Note - ring_index for fbr[] array is reversed
3033 buf = rx_local->fbr[(ring_index == 0 ? 1 : 0)]->
3036 /* Loop through our list to see if the
3037 * destination address of this packet
3038 * matches one in our list.
3040 for (i = 0; i < adapter->multicast_addr_count;
3043 adapter->multicast_list[i][0]
3045 adapter->multicast_list[i][1]
3047 adapter->multicast_list[i][2]
3049 adapter->multicast_list[i][3]
3051 adapter->multicast_list[i][4]
3053 adapter->multicast_list[i][5]) {
3058 /* If our index is equal to the number
3059 * of Multicast address we have, then
3060 * this means we did not find this
3061 * packet's matching address in our
3062 * list. Set the len to zero,
3063 * so we free our RFD when we return
3064 * from this function.
3066 if (i == adapter->multicast_addr_count)
3071 adapter->stats.multicast_pkts_rcvd++;
3072 } else if (word0 & ALCATEL_BROADCAST_PKT)
3073 adapter->stats.broadcast_pkts_rcvd++;
3075 /* Not sure what this counter measures in
3076 * promiscuous mode. Perhaps we should check
3077 * the MAC address to see if it is directed
3078 * to us in promiscuous mode.
3080 adapter->stats.unicast_pkts_rcvd++;
3084 struct sk_buff *skb = NULL;
3086 /*rfd->len = len - 4; */
3089 skb = dev_alloc_skb(rfd->len + 2);
3091 dev_err(&adapter->pdev->dev,
3092 "Couldn't alloc an SKB for Rx\n");
3096 adapter->net_stats.rx_bytes += rfd->len;
3099 * Note - ring_index for fbr[] array is reversed,
3102 memcpy(skb_put(skb, rfd->len),
3103 rx_local->fbr[(ring_index == 0 ? 1 : 0)]->virt[buff_index],
3106 skb->dev = adapter->netdev;
3107 skb->protocol = eth_type_trans(skb, adapter->netdev);
3108 skb->ip_summed = CHECKSUM_NONE;
3115 nic_return_rfd(adapter, rfd);
3120 * et131x_handle_recv_interrupt - Interrupt handler for receive processing
3121 * @adapter: pointer to our adapter
3123 * Assumption, Rcv spinlock has been acquired.
3125 static void et131x_handle_recv_interrupt(struct et131x_adapter *adapter)
3127 struct rfd *rfd = NULL;
3131 /* Process up to available RFD's */
3132 while (count < NUM_PACKETS_HANDLED) {
3133 if (list_empty(&adapter->rx_ring.recv_list)) {
3134 WARN_ON(adapter->rx_ring.num_ready_recv != 0);
3139 rfd = nic_rx_pkts(adapter);
3144 /* Do not receive any packets until a filter has been set.
3145 * Do not receive any packets until we have link.
3146 * If length is zero, return the RFD in order to advance the
3149 if (!adapter->packet_filter ||
3150 !netif_carrier_ok(adapter->netdev) ||
3154 /* Increment the number of packets we received */
3155 adapter->net_stats.rx_packets++;
3157 /* Set the status on the packet, either resources or success */
3158 if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) {
3159 dev_warn(&adapter->pdev->dev,
3160 "RFD's are running out\n");
3165 if (count == NUM_PACKETS_HANDLED || !done) {
3166 adapter->rx_ring.unfinished_receives = true;
3167 writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO,
3168 &adapter->regs->global.watchdog_timer);
3170 /* Watchdog timer will disable itself if appropriate. */
3171 adapter->rx_ring.unfinished_receives = false;
3175 * et131x_tx_dma_memory_alloc
3176 * @adapter: pointer to our private adapter structure
3178 * Returns 0 on success and errno on failure (as defined in errno.h).
3180 * Allocates memory that will be visible both to the device and to the CPU.
3181 * The OS will pass us packets, pointers to which we will insert in the Tx
3182 * Descriptor queue. The device will read this queue to find the packets in
3183 * memory. The device will update the "status" in memory each time it xmits a
3186 static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter)
3189 struct tx_ring *tx_ring = &adapter->tx_ring;
3191 /* Allocate memory for the TCB's (Transmit Control Block) */
3192 adapter->tx_ring.tcb_ring =
3193 kcalloc(NUM_TCB, sizeof(struct tcb), GFP_ATOMIC | GFP_DMA);
3194 if (!adapter->tx_ring.tcb_ring) {
3195 dev_err(&adapter->pdev->dev, "Cannot alloc memory for TCBs\n");
3199 /* Allocate enough memory for the Tx descriptor ring, and allocate
3200 * some extra so that the ring can be aligned on a 4k boundary.
3202 desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX) + 4096 - 1;
3203 tx_ring->tx_desc_ring =
3204 (struct tx_desc *) dma_alloc_coherent(&adapter->pdev->dev,
3206 &tx_ring->tx_desc_ring_pa,
3208 if (!adapter->tx_ring.tx_desc_ring) {
3209 dev_err(&adapter->pdev->dev,
3210 "Cannot alloc memory for Tx Ring\n");
3214 /* Save physical address
3216 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
3217 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
3218 * are ever returned, make sure the high part is retrieved here before
3219 * storing the adjusted address.
3221 /* Allocate memory for the Tx status block */
3222 tx_ring->tx_status = dma_alloc_coherent(&adapter->pdev->dev,
3224 &tx_ring->tx_status_pa,
3226 if (!adapter->tx_ring.tx_status_pa) {
3227 dev_err(&adapter->pdev->dev,
3228 "Cannot alloc memory for Tx status block\n");
3235 * et131x_tx_dma_memory_free - Free all memory allocated within this module
3236 * @adapter: pointer to our private adapter structure
3238 * Returns 0 on success and errno on failure (as defined in errno.h).
3240 static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
3244 if (adapter->tx_ring.tx_desc_ring) {
3245 /* Free memory relating to Tx rings here */
3246 desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX)
3248 dma_free_coherent(&adapter->pdev->dev,
3250 adapter->tx_ring.tx_desc_ring,
3251 adapter->tx_ring.tx_desc_ring_pa);
3252 adapter->tx_ring.tx_desc_ring = NULL;
3255 /* Free memory for the Tx status block */
3256 if (adapter->tx_ring.tx_status) {
3257 dma_free_coherent(&adapter->pdev->dev,
3259 adapter->tx_ring.tx_status,
3260 adapter->tx_ring.tx_status_pa);
3262 adapter->tx_ring.tx_status = NULL;
3264 /* Free the memory for the tcb structures */
3265 kfree(adapter->tx_ring.tcb_ring);
3269 * nic_send_packet - NIC specific send handler for version B silicon.
3270 * @adapter: pointer to our adapter
3271 * @tcb: pointer to struct tcb
3273 * Returns 0 or errno.
3275 static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
3278 struct tx_desc desc[24]; /* 24 x 16 byte */
3280 u32 thiscopy, remainder;
3281 struct sk_buff *skb = tcb->skb;
3282 u32 nr_frags = skb_shinfo(skb)->nr_frags + 1;
3283 struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0];
3284 unsigned long flags;
3285 struct phy_device *phydev = adapter->phydev;
3287 /* Part of the optimizations of this send routine restrict us to
3288 * sending 24 fragments at a pass. In practice we should never see
3289 * more than 5 fragments.
3291 * NOTE: The older version of this function (below) can handle any
3292 * number of fragments. If needed, we can call this function,
3293 * although it is less efficient.
3298 memset(desc, 0, sizeof(struct tx_desc) * (nr_frags + 1));
3300 for (i = 0; i < nr_frags; i++) {
3301 /* If there is something in this element, lets get a
3302 * descriptor from the ring and get the necessary data
3305 /* If the fragments are smaller than a standard MTU,
3306 * then map them to a single descriptor in the Tx
3307 * Desc ring. However, if they're larger, as is
3308 * possible with support for jumbo packets, then
3309 * split them each across 2 descriptors.
3311 * This will work until we determine why the hardware
3312 * doesn't seem to like large fragments.
3314 if ((skb->len - skb->data_len) <= 1514) {
3315 desc[frag].addr_hi = 0;
3316 /* Low 16bits are length, high is vlan and
3317 unused currently so zero */
3318 desc[frag].len_vlan =
3319 skb->len - skb->data_len;
3321 /* NOTE: Here, the dma_addr_t returned from
3322 * dma_map_single() is implicitly cast as a
3323 * u32. Although dma_addr_t can be
3324 * 64-bit, the address returned by
3325 * dma_map_single() is always 32-bit
3326 * addressable (as defined by the pci/dma
3329 desc[frag++].addr_lo =
3330 dma_map_single(&adapter->pdev->dev,
3336 desc[frag].addr_hi = 0;
3337 desc[frag].len_vlan =
3338 (skb->len - skb->data_len) / 2;
3340 /* NOTE: Here, the dma_addr_t returned from
3341 * dma_map_single() is implicitly cast as a
3342 * u32. Although dma_addr_t can be
3343 * 64-bit, the address returned by
3344 * dma_map_single() is always 32-bit
3345 * addressable (as defined by the pci/dma
3348 desc[frag++].addr_lo =
3349 dma_map_single(&adapter->pdev->dev,
3352 skb->data_len) / 2),
3354 desc[frag].addr_hi = 0;
3356 desc[frag].len_vlan =
3357 (skb->len - skb->data_len) / 2;
3359 /* NOTE: Here, the dma_addr_t returned from
3360 * dma_map_single() is implicitly cast as a
3361 * u32. Although dma_addr_t can be
3362 * 64-bit, the address returned by
3363 * dma_map_single() is always 32-bit
3364 * addressable (as defined by the pci/dma
3367 desc[frag++].addr_lo =
3368 dma_map_single(&adapter->pdev->dev,
3371 skb->data_len) / 2),
3373 skb->data_len) / 2),
3377 desc[frag].addr_hi = 0;
3378 desc[frag].len_vlan =
3381 /* NOTE: Here, the dma_addr_t returned from
3382 * dma_map_page() is implicitly cast as a u32.
3383 * Although dma_addr_t can be 64-bit, the address
3384 * returned by dma_map_page() is always 32-bit
3385 * addressable (as defined by the pci/dma subsystem)
3387 desc[frag++].addr_lo = skb_frag_dma_map(
3388 &adapter->pdev->dev,
3396 if (phydev && phydev->speed == SPEED_1000) {
3397 if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) {
3398 /* Last element & Interrupt flag */
3399 desc[frag - 1].flags = 0x5;
3400 adapter->tx_ring.since_irq = 0;
3401 } else { /* Last element */
3402 desc[frag - 1].flags = 0x1;
3405 desc[frag - 1].flags = 0x5;
3407 desc[0].flags |= 2; /* First element flag */
3409 tcb->index_start = adapter->tx_ring.send_idx;
3412 spin_lock_irqsave(&adapter->send_hw_lock, flags);
3414 thiscopy = NUM_DESC_PER_RING_TX -
3415 INDEX10(adapter->tx_ring.send_idx);
3417 if (thiscopy >= frag) {
3421 remainder = frag - thiscopy;
3424 memcpy(adapter->tx_ring.tx_desc_ring +
3425 INDEX10(adapter->tx_ring.send_idx), desc,
3426 sizeof(struct tx_desc) * thiscopy);
3428 add_10bit(&adapter->tx_ring.send_idx, thiscopy);
3430 if (INDEX10(adapter->tx_ring.send_idx) == 0 ||
3431 INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) {
3432 adapter->tx_ring.send_idx &= ~ET_DMA10_MASK;
3433 adapter->tx_ring.send_idx ^= ET_DMA10_WRAP;
3437 memcpy(adapter->tx_ring.tx_desc_ring,
3439 sizeof(struct tx_desc) * remainder);
3441 add_10bit(&adapter->tx_ring.send_idx, remainder);
3444 if (INDEX10(adapter->tx_ring.send_idx) == 0) {
3445 if (adapter->tx_ring.send_idx)
3446 tcb->index = NUM_DESC_PER_RING_TX - 1;
3448 tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1);
3450 tcb->index = adapter->tx_ring.send_idx - 1;
3452 spin_lock(&adapter->tcb_send_qlock);
3454 if (adapter->tx_ring.send_tail)
3455 adapter->tx_ring.send_tail->next = tcb;
3457 adapter->tx_ring.send_head = tcb;
3459 adapter->tx_ring.send_tail = tcb;
3461 WARN_ON(tcb->next != NULL);
3463 adapter->tx_ring.used++;
3465 spin_unlock(&adapter->tcb_send_qlock);
3467 /* Write the new write pointer back to the device. */
3468 writel(adapter->tx_ring.send_idx,
3469 &adapter->regs->txdma.service_request);
3471 /* For Gig only, we use Tx Interrupt coalescing. Enable the software
3472 * timer to wake us up if this packet isn't followed by N more.
3474 if (phydev && phydev->speed == SPEED_1000) {
3475 writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO,
3476 &adapter->regs->global.watchdog_timer);
3478 spin_unlock_irqrestore(&adapter->send_hw_lock, flags);
3484 * send_packet - Do the work to send a packet
3485 * @skb: the packet(s) to send
3486 * @adapter: a pointer to the device's private adapter structure
3488 * Return 0 in almost all cases; non-zero value in extreme hard failure only.
3490 * Assumption: Send spinlock has been acquired
3492 static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter)
3495 struct tcb *tcb = NULL;
3497 unsigned long flags;
3499 /* All packets must have at least a MAC address and a protocol type */
3500 if (skb->len < ETH_HLEN)
3503 /* Get a TCB for this packet */
3504 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3506 tcb = adapter->tx_ring.tcb_qhead;
3509 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3513 adapter->tx_ring.tcb_qhead = tcb->next;
3515 if (adapter->tx_ring.tcb_qhead == NULL)
3516 adapter->tx_ring.tcb_qtail = NULL;
3518 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3522 if (skb->data != NULL && skb->len - skb->data_len >= 6) {
3523 shbufva = (u16 *) skb->data;
3525 if ((shbufva[0] == 0xffff) &&
3526 (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) {
3527 tcb->flags |= fMP_DEST_BROAD;
3528 } else if ((shbufva[0] & 0x3) == 0x0001) {
3529 tcb->flags |= fMP_DEST_MULTI;
3535 /* Call the NIC specific send handler. */
3536 status = nic_send_packet(adapter, tcb);
3539 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3541 if (adapter->tx_ring.tcb_qtail)
3542 adapter->tx_ring.tcb_qtail->next = tcb;
3544 /* Apparently ready Q is empty. */
3545 adapter->tx_ring.tcb_qhead = tcb;
3547 adapter->tx_ring.tcb_qtail = tcb;
3548 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3551 WARN_ON(adapter->tx_ring.used > NUM_TCB);
3556 * et131x_send_packets - This function is called by the OS to send packets
3557 * @skb: the packet(s) to send
3558 * @netdev:device on which to TX the above packet(s)
3560 * Return 0 in almost all cases; non-zero value in extreme hard failure only
3562 static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
3565 struct et131x_adapter *adapter = netdev_priv(netdev);
3567 /* Send these packets
3569 * NOTE: The Linux Tx entry point is only given one packet at a time
3570 * to Tx, so the PacketCount and it's array used makes no sense here
3573 /* TCB is not available */
3574 if (adapter->tx_ring.used >= NUM_TCB) {
3575 /* NOTE: If there's an error on send, no need to queue the
3576 * packet under Linux; if we just send an error up to the
3577 * netif layer, it will resend the skb to us.
3581 /* We need to see if the link is up; if it's not, make the
3582 * netif layer think we're good and drop the packet
3584 if ((adapter->flags & fMP_ADAPTER_FAIL_SEND_MASK) ||
3585 !netif_carrier_ok(netdev)) {
3586 dev_kfree_skb_any(skb);
3589 adapter->net_stats.tx_dropped++;
3591 status = send_packet(skb, adapter);
3592 if (status != 0 && status != -ENOMEM) {
3593 /* On any other error, make netif think we're
3594 * OK and drop the packet
3596 dev_kfree_skb_any(skb);
3598 adapter->net_stats.tx_dropped++;
3606 * free_send_packet - Recycle a struct tcb
3607 * @adapter: pointer to our adapter
3608 * @tcb: pointer to struct tcb
3610 * Complete the packet if necessary
3611 * Assumption - Send spinlock has been acquired
3613 static inline void free_send_packet(struct et131x_adapter *adapter,
3616 unsigned long flags;
3617 struct tx_desc *desc = NULL;
3618 struct net_device_stats *stats = &adapter->net_stats;
3620 if (tcb->flags & fMP_DEST_BROAD)
3621 atomic_inc(&adapter->stats.broadcast_pkts_xmtd);
3622 else if (tcb->flags & fMP_DEST_MULTI)
3623 atomic_inc(&adapter->stats.multicast_pkts_xmtd);
3625 atomic_inc(&adapter->stats.unicast_pkts_xmtd);
3628 stats->tx_bytes += tcb->skb->len;
3630 /* Iterate through the TX descriptors on the ring
3631 * corresponding to this packet and umap the fragments
3635 desc = (struct tx_desc *)
3636 (adapter->tx_ring.tx_desc_ring +
3637 INDEX10(tcb->index_start));
3639 dma_unmap_single(&adapter->pdev->dev,
3641 desc->len_vlan, DMA_TO_DEVICE);
3643 add_10bit(&tcb->index_start, 1);
3644 if (INDEX10(tcb->index_start) >=
3645 NUM_DESC_PER_RING_TX) {
3646 tcb->index_start &= ~ET_DMA10_MASK;
3647 tcb->index_start ^= ET_DMA10_WRAP;
3649 } while (desc != (adapter->tx_ring.tx_desc_ring +
3650 INDEX10(tcb->index)));
3652 dev_kfree_skb_any(tcb->skb);
3655 memset(tcb, 0, sizeof(struct tcb));
3657 /* Add the TCB to the Ready Q */
3658 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3660 adapter->net_stats.tx_packets++;
3662 if (adapter->tx_ring.tcb_qtail)
3663 adapter->tx_ring.tcb_qtail->next = tcb;
3665 /* Apparently ready Q is empty. */
3666 adapter->tx_ring.tcb_qhead = tcb;
3668 adapter->tx_ring.tcb_qtail = tcb;
3670 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3671 WARN_ON(adapter->tx_ring.used < 0);
3675 * et131x_free_busy_send_packets - Free and complete the stopped active sends
3676 * @adapter: pointer to our adapter
3678 * Assumption - Send spinlock has been acquired
3680 static void et131x_free_busy_send_packets(struct et131x_adapter *adapter)
3683 unsigned long flags;
3686 /* Any packets being sent? Check the first TCB on the send list */
3687 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3689 tcb = adapter->tx_ring.send_head;
3691 while (tcb != NULL && freed < NUM_TCB) {
3692 struct tcb *next = tcb->next;
3694 adapter->tx_ring.send_head = next;
3697 adapter->tx_ring.send_tail = NULL;
3699 adapter->tx_ring.used--;
3701 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3704 free_send_packet(adapter, tcb);
3706 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3708 tcb = adapter->tx_ring.send_head;
3711 WARN_ON(freed == NUM_TCB);
3713 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3715 adapter->tx_ring.used = 0;
3719 * et131x_handle_send_interrupt - Interrupt handler for sending processing
3720 * @adapter: pointer to our adapter
3722 * Re-claim the send resources, complete sends and get more to send from
3723 * the send wait queue.
3725 * Assumption - Send spinlock has been acquired
3727 static void et131x_handle_send_interrupt(struct et131x_adapter *adapter)
3729 unsigned long flags;
3734 serviced = readl(&adapter->regs->txdma.new_service_complete);
3735 index = INDEX10(serviced);
3737 /* Has the ring wrapped? Process any descriptors that do not have
3738 * the same "wrap" indicator as the current completion indicator
3740 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3742 tcb = adapter->tx_ring.send_head;
3745 ((serviced ^ tcb->index) & ET_DMA10_WRAP) &&
3746 index < INDEX10(tcb->index)) {
3747 adapter->tx_ring.used--;
3748 adapter->tx_ring.send_head = tcb->next;
3749 if (tcb->next == NULL)
3750 adapter->tx_ring.send_tail = NULL;
3752 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3753 free_send_packet(adapter, tcb);
3754 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3756 /* Goto the next packet */
3757 tcb = adapter->tx_ring.send_head;
3760 !((serviced ^ tcb->index) & ET_DMA10_WRAP)
3761 && index > (tcb->index & ET_DMA10_MASK)) {
3762 adapter->tx_ring.used--;
3763 adapter->tx_ring.send_head = tcb->next;
3764 if (tcb->next == NULL)
3765 adapter->tx_ring.send_tail = NULL;
3767 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3768 free_send_packet(adapter, tcb);
3769 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3771 /* Goto the next packet */
3772 tcb = adapter->tx_ring.send_head;
3775 /* Wake up the queue when we hit a low-water mark */
3776 if (adapter->tx_ring.used <= NUM_TCB / 3)
3777 netif_wake_queue(adapter->netdev);
3779 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3782 static int et131x_get_settings(struct net_device *netdev,
3783 struct ethtool_cmd *cmd)
3785 struct et131x_adapter *adapter = netdev_priv(netdev);
3787 return phy_ethtool_gset(adapter->phydev, cmd);
3790 static int et131x_set_settings(struct net_device *netdev,
3791 struct ethtool_cmd *cmd)
3793 struct et131x_adapter *adapter = netdev_priv(netdev);
3795 return phy_ethtool_sset(adapter->phydev, cmd);
3798 static int et131x_get_regs_len(struct net_device *netdev)
3800 #define ET131X_REGS_LEN 256
3801 return ET131X_REGS_LEN * sizeof(u32);
3804 static void et131x_get_regs(struct net_device *netdev,
3805 struct ethtool_regs *regs, void *regs_data)
3807 struct et131x_adapter *adapter = netdev_priv(netdev);
3808 struct address_map __iomem *aregs = adapter->regs;
3809 u32 *regs_buff = regs_data;
3812 memset(regs_data, 0, et131x_get_regs_len(netdev));
3814 regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
3815 adapter->pdev->device;
3818 et131x_mii_read(adapter, MII_BMCR, (u16 *)®s_buff[num++]);
3819 et131x_mii_read(adapter, MII_BMSR, (u16 *)®s_buff[num++]);
3820 et131x_mii_read(adapter, MII_PHYSID1, (u16 *)®s_buff[num++]);
3821 et131x_mii_read(adapter, MII_PHYSID2, (u16 *)®s_buff[num++]);
3822 et131x_mii_read(adapter, MII_ADVERTISE, (u16 *)®s_buff[num++]);
3823 et131x_mii_read(adapter, MII_LPA, (u16 *)®s_buff[num++]);
3824 et131x_mii_read(adapter, MII_EXPANSION, (u16 *)®s_buff[num++]);
3825 /* Autoneg next page transmit reg */
3826 et131x_mii_read(adapter, 0x07, (u16 *)®s_buff[num++]);
3827 /* Link partner next page reg */
3828 et131x_mii_read(adapter, 0x08, (u16 *)®s_buff[num++]);
3829 et131x_mii_read(adapter, MII_CTRL1000, (u16 *)®s_buff[num++]);
3830 et131x_mii_read(adapter, MII_STAT1000, (u16 *)®s_buff[num++]);
3831 et131x_mii_read(adapter, MII_ESTATUS, (u16 *)®s_buff[num++]);
3832 et131x_mii_read(adapter, PHY_INDEX_REG, (u16 *)®s_buff[num++]);
3833 et131x_mii_read(adapter, PHY_DATA_REG, (u16 *)®s_buff[num++]);
3834 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
3835 (u16 *)®s_buff[num++]);
3836 et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL,
3837 (u16 *)®s_buff[num++]);
3838 et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL+1,
3839 (u16 *)®s_buff[num++]);
3840 et131x_mii_read(adapter, PHY_REGISTER_MGMT_CONTROL,
3841 (u16 *)®s_buff[num++]);
3842 et131x_mii_read(adapter, PHY_CONFIG, (u16 *)®s_buff[num++]);
3843 et131x_mii_read(adapter, PHY_PHY_CONTROL, (u16 *)®s_buff[num++]);
3844 et131x_mii_read(adapter, PHY_INTERRUPT_MASK, (u16 *)®s_buff[num++]);
3845 et131x_mii_read(adapter, PHY_INTERRUPT_STATUS,
3846 (u16 *)®s_buff[num++]);
3847 et131x_mii_read(adapter, PHY_PHY_STATUS, (u16 *)®s_buff[num++]);
3848 et131x_mii_read(adapter, PHY_LED_1, (u16 *)®s_buff[num++]);
3849 et131x_mii_read(adapter, PHY_LED_2, (u16 *)®s_buff[num++]);
3852 regs_buff[num++] = readl(&aregs->global.txq_start_addr);
3853 regs_buff[num++] = readl(&aregs->global.txq_end_addr);
3854 regs_buff[num++] = readl(&aregs->global.rxq_start_addr);
3855 regs_buff[num++] = readl(&aregs->global.rxq_end_addr);
3856 regs_buff[num++] = readl(&aregs->global.pm_csr);
3857 regs_buff[num++] = adapter->stats.interrupt_status;
3858 regs_buff[num++] = readl(&aregs->global.int_mask);
3859 regs_buff[num++] = readl(&aregs->global.int_alias_clr_en);
3860 regs_buff[num++] = readl(&aregs->global.int_status_alias);
3861 regs_buff[num++] = readl(&aregs->global.sw_reset);
3862 regs_buff[num++] = readl(&aregs->global.slv_timer);
3863 regs_buff[num++] = readl(&aregs->global.msi_config);
3864 regs_buff[num++] = readl(&aregs->global.loopback);
3865 regs_buff[num++] = readl(&aregs->global.watchdog_timer);
3868 regs_buff[num++] = readl(&aregs->txdma.csr);
3869 regs_buff[num++] = readl(&aregs->txdma.pr_base_hi);
3870 regs_buff[num++] = readl(&aregs->txdma.pr_base_lo);
3871 regs_buff[num++] = readl(&aregs->txdma.pr_num_des);
3872 regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr);
3873 regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr_ext);
3874 regs_buff[num++] = readl(&aregs->txdma.txq_rd_addr);
3875 regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_hi);
3876 regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_lo);
3877 regs_buff[num++] = readl(&aregs->txdma.service_request);
3878 regs_buff[num++] = readl(&aregs->txdma.service_complete);
3879 regs_buff[num++] = readl(&aregs->txdma.cache_rd_index);
3880 regs_buff[num++] = readl(&aregs->txdma.cache_wr_index);
3881 regs_buff[num++] = readl(&aregs->txdma.tx_dma_error);
3882 regs_buff[num++] = readl(&aregs->txdma.desc_abort_cnt);
3883 regs_buff[num++] = readl(&aregs->txdma.payload_abort_cnt);
3884 regs_buff[num++] = readl(&aregs->txdma.writeback_abort_cnt);
3885 regs_buff[num++] = readl(&aregs->txdma.desc_timeout_cnt);
3886 regs_buff[num++] = readl(&aregs->txdma.payload_timeout_cnt);
3887 regs_buff[num++] = readl(&aregs->txdma.writeback_timeout_cnt);
3888 regs_buff[num++] = readl(&aregs->txdma.desc_error_cnt);
3889 regs_buff[num++] = readl(&aregs->txdma.payload_error_cnt);
3890 regs_buff[num++] = readl(&aregs->txdma.writeback_error_cnt);
3891 regs_buff[num++] = readl(&aregs->txdma.dropped_tlp_cnt);
3892 regs_buff[num++] = readl(&aregs->txdma.new_service_complete);
3893 regs_buff[num++] = readl(&aregs->txdma.ethernet_packet_cnt);
3896 regs_buff[num++] = readl(&aregs->rxdma.csr);
3897 regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_hi);
3898 regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_lo);
3899 regs_buff[num++] = readl(&aregs->rxdma.num_pkt_done);
3900 regs_buff[num++] = readl(&aregs->rxdma.max_pkt_time);
3901 regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr);
3902 regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr_ext);
3903 regs_buff[num++] = readl(&aregs->rxdma.rxq_wr_addr);
3904 regs_buff[num++] = readl(&aregs->rxdma.psr_base_hi);
3905 regs_buff[num++] = readl(&aregs->rxdma.psr_base_lo);
3906 regs_buff[num++] = readl(&aregs->rxdma.psr_num_des);
3907 regs_buff[num++] = readl(&aregs->rxdma.psr_avail_offset);
3908 regs_buff[num++] = readl(&aregs->rxdma.psr_full_offset);
3909 regs_buff[num++] = readl(&aregs->rxdma.psr_access_index);
3910 regs_buff[num++] = readl(&aregs->rxdma.psr_min_des);
3911 regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_lo);
3912 regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_hi);
3913 regs_buff[num++] = readl(&aregs->rxdma.fbr0_num_des);
3914 regs_buff[num++] = readl(&aregs->rxdma.fbr0_avail_offset);
3915 regs_buff[num++] = readl(&aregs->rxdma.fbr0_full_offset);
3916 regs_buff[num++] = readl(&aregs->rxdma.fbr0_rd_index);
3917 regs_buff[num++] = readl(&aregs->rxdma.fbr0_min_des);
3918 regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_lo);
3919 regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_hi);
3920 regs_buff[num++] = readl(&aregs->rxdma.fbr1_num_des);
3921 regs_buff[num++] = readl(&aregs->rxdma.fbr1_avail_offset);
3922 regs_buff[num++] = readl(&aregs->rxdma.fbr1_full_offset);
3923 regs_buff[num++] = readl(&aregs->rxdma.fbr1_rd_index);
3924 regs_buff[num++] = readl(&aregs->rxdma.fbr1_min_des);
3927 #define ET131X_DRVINFO_LEN 32 /* value from ethtool.h */
3928 static void et131x_get_drvinfo(struct net_device *netdev,
3929 struct ethtool_drvinfo *info)
3931 struct et131x_adapter *adapter = netdev_priv(netdev);
3933 strncpy(info->driver, DRIVER_NAME, ET131X_DRVINFO_LEN);
3934 strncpy(info->version, DRIVER_VERSION, ET131X_DRVINFO_LEN);
3935 strncpy(info->bus_info, pci_name(adapter->pdev), ET131X_DRVINFO_LEN);
3938 static struct ethtool_ops et131x_ethtool_ops = {
3939 .get_settings = et131x_get_settings,
3940 .set_settings = et131x_set_settings,
3941 .get_drvinfo = et131x_get_drvinfo,
3942 .get_regs_len = et131x_get_regs_len,
3943 .get_regs = et131x_get_regs,
3944 .get_link = ethtool_op_get_link,
3947 static void et131x_set_ethtool_ops(struct net_device *netdev)
3949 SET_ETHTOOL_OPS(netdev, &et131x_ethtool_ops);
3953 * et131x_hwaddr_init - set up the MAC Address on the ET1310
3954 * @adapter: pointer to our private adapter structure
3956 static void et131x_hwaddr_init(struct et131x_adapter *adapter)
3958 /* If have our default mac from init and no mac address from
3959 * EEPROM then we need to generate the last octet and set it on the
3962 if (adapter->rom_addr[0] == 0x00 &&
3963 adapter->rom_addr[1] == 0x00 &&
3964 adapter->rom_addr[2] == 0x00 &&
3965 adapter->rom_addr[3] == 0x00 &&
3966 adapter->rom_addr[4] == 0x00 &&
3967 adapter->rom_addr[5] == 0x00) {
3969 * We need to randomly generate the last octet so we
3970 * decrease our chances of setting the mac address to
3971 * same as another one of our cards in the system
3973 get_random_bytes(&adapter->addr[5], 1);
3975 * We have the default value in the register we are
3976 * working with so we need to copy the current
3977 * address into the permanent address
3979 memcpy(adapter->rom_addr,
3980 adapter->addr, ETH_ALEN);
3982 /* We do not have an override address, so set the
3983 * current address to the permanent address and add
3986 memcpy(adapter->addr,
3987 adapter->rom_addr, ETH_ALEN);
3992 * et131x_pci_init - initial PCI setup
3993 * @adapter: pointer to our private adapter structure
3994 * @pdev: our PCI device
3996 * Perform the initial setup of PCI registers and if possible initialise
3997 * the MAC address. At this point the I/O registers have yet to be mapped
3999 static int et131x_pci_init(struct et131x_adapter *adapter,
4000 struct pci_dev *pdev)
4002 int cap = pci_pcie_cap(pdev);
4007 rc = et131x_init_eeprom(adapter);
4012 dev_err(&pdev->dev, "Missing PCIe capabilities\n");
4016 /* Let's set up the PORT LOGIC Register. First we need to know what
4017 * the max_payload_size is
4019 if (pci_read_config_word(pdev, cap + PCI_EXP_DEVCAP, &max_payload)) {
4021 "Could not read PCI config space for Max Payload Size\n");
4025 /* Program the Ack/Nak latency and replay timers */
4026 max_payload &= 0x07;
4028 if (max_payload < 2) {
4029 static const u16 acknak[2] = { 0x76, 0xD0 };
4030 static const u16 replay[2] = { 0x1E0, 0x2ED };
4032 if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
4033 acknak[max_payload])) {
4035 "Could not write PCI config space for ACK/NAK\n");
4038 if (pci_write_config_word(pdev, ET1310_PCI_REPLAY,
4039 replay[max_payload])) {
4041 "Could not write PCI config space for Replay Timer\n");
4046 /* l0s and l1 latency timers. We are using default values.
4047 * Representing 001 for L0s and 010 for L1
4049 if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) {
4051 "Could not write PCI config space for Latency Timers\n");
4055 /* Change the max read size to 2k */
4056 if (pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &ctl)) {
4058 "Could not read PCI config space for Max read size\n");
4062 ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | (0x04 << 12);
4064 if (pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl)) {
4066 "Could not write PCI config space for Max read size\n");
4070 /* Get MAC address from config space if an eeprom exists, otherwise
4071 * the MAC address there will not be valid
4073 if (!adapter->has_eeprom) {
4074 et131x_hwaddr_init(adapter);
4078 for (i = 0; i < ETH_ALEN; i++) {
4079 if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i,
4080 adapter->rom_addr + i)) {
4081 dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n");
4085 memcpy(adapter->addr, adapter->rom_addr, ETH_ALEN);
4094 * et131x_error_timer_handler
4095 * @data: timer-specific variable; here a pointer to our adapter structure
4097 * The routine called when the error timer expires, to track the number of
4100 static void et131x_error_timer_handler(unsigned long data)
4102 struct et131x_adapter *adapter = (struct et131x_adapter *) data;
4103 struct phy_device *phydev = adapter->phydev;
4105 if (et1310_in_phy_coma(adapter)) {
4106 /* Bring the device immediately out of coma, to
4107 * prevent it from sleeping indefinitely, this
4108 * mechanism could be improved! */
4109 et1310_disable_phy_coma(adapter);
4110 adapter->boot_coma = 20;
4112 et1310_update_macstat_host_counters(adapter);
4115 if (!phydev->link && adapter->boot_coma < 11)
4116 adapter->boot_coma++;
4118 if (adapter->boot_coma == 10) {
4119 if (!phydev->link) {
4120 if (!et1310_in_phy_coma(adapter)) {
4121 /* NOTE - This was originally a 'sync with
4122 * interrupt'. How to do that under Linux?
4124 et131x_enable_interrupts(adapter);
4125 et1310_enable_phy_coma(adapter);
4130 /* This is a periodic timer, so reschedule */
4131 mod_timer(&adapter->error_timer, jiffies +
4132 TX_ERROR_PERIOD * HZ / 1000);
4136 * et131x_adapter_memory_alloc
4137 * @adapter: pointer to our private adapter structure
4139 * Returns 0 on success, errno on failure (as defined in errno.h).
4141 * Allocate all the memory blocks for send, receive and others.
4143 static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
4147 /* Allocate memory for the Tx Ring */
4148 status = et131x_tx_dma_memory_alloc(adapter);
4150 dev_err(&adapter->pdev->dev,
4151 "et131x_tx_dma_memory_alloc FAILED\n");
4154 /* Receive buffer memory allocation */
4155 status = et131x_rx_dma_memory_alloc(adapter);
4157 dev_err(&adapter->pdev->dev,
4158 "et131x_rx_dma_memory_alloc FAILED\n");
4159 et131x_tx_dma_memory_free(adapter);
4163 /* Init receive data structures */
4164 status = et131x_init_recv(adapter);
4166 dev_err(&adapter->pdev->dev,
4167 "et131x_init_recv FAILED\n");
4168 et131x_tx_dma_memory_free(adapter);
4169 et131x_rx_dma_memory_free(adapter);
4175 * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
4176 * @adapter: pointer to our private adapter structure
4178 static void et131x_adapter_memory_free(struct et131x_adapter *adapter)
4180 /* Free DMA memory */
4181 et131x_tx_dma_memory_free(adapter);
4182 et131x_rx_dma_memory_free(adapter);
4185 static void et131x_adjust_link(struct net_device *netdev)
4187 struct et131x_adapter *adapter = netdev_priv(netdev);
4188 struct phy_device *phydev = adapter->phydev;
4190 if (netif_carrier_ok(netdev)) {
4191 adapter->boot_coma = 20;
4193 if (phydev && phydev->speed == SPEED_10) {
4195 * NOTE - Is there a way to query this without
4197 * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
4198 * EMI_TRUEPHY_A13O) {
4202 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
4204 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4206 et131x_mii_write(adapter, PHY_INDEX_REG,
4207 register18 | 0x8402);
4208 et131x_mii_write(adapter, PHY_DATA_REG,
4210 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4214 et1310_config_flow_control(adapter);
4216 if (phydev && phydev->speed == SPEED_1000 &&
4217 adapter->registry_jumbo_packet > 2048) {
4220 et131x_mii_read(adapter, PHY_CONFIG, ®);
4221 reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
4222 reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
4223 et131x_mii_write(adapter, PHY_CONFIG, reg);
4226 et131x_set_rx_dma_timer(adapter);
4227 et1310_config_mac_regs2(adapter);
4230 if (phydev && phydev->link != adapter->link) {
4232 * Check to see if we are in coma mode and if
4233 * so, disable it because we will not be able
4234 * to read PHY values until we are out.
4236 if (et1310_in_phy_coma(adapter))
4237 et1310_disable_phy_coma(adapter);
4240 adapter->boot_coma = 20;
4242 dev_warn(&adapter->pdev->dev,
4243 "Link down - cable problem ?\n");
4244 adapter->boot_coma = 0;
4246 if (phydev->speed == SPEED_10) {
4247 /* NOTE - Is there a way to query this without
4249 * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
4254 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
4256 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4258 et131x_mii_write(adapter, PHY_INDEX_REG,
4259 register18 | 0x8402);
4260 et131x_mii_write(adapter, PHY_DATA_REG,
4262 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4266 /* Free the packets being actively sent & stopped */
4267 et131x_free_busy_send_packets(adapter);
4269 /* Re-initialize the send structures */
4270 et131x_init_send(adapter);
4273 * Bring the device back to the state it was during
4274 * init prior to autonegotiation being complete. This
4275 * way, when we get the auto-neg complete interrupt,
4276 * we can complete init by calling config_mac_regs2.
4278 et131x_soft_reset(adapter);
4280 /* Setup ET1310 as per the documentation */
4281 et131x_adapter_setup(adapter);
4283 /* perform reset of tx/rx */
4284 et131x_disable_txrx(netdev);
4285 et131x_enable_txrx(netdev);
4288 adapter->link = phydev->link;
4290 phy_print_status(phydev);
4294 static int et131x_mii_probe(struct net_device *netdev)
4296 struct et131x_adapter *adapter = netdev_priv(netdev);
4297 struct phy_device *phydev = NULL;
4299 phydev = phy_find_first(adapter->mii_bus);
4301 dev_err(&adapter->pdev->dev, "no PHY found\n");
4305 phydev = phy_connect(netdev, dev_name(&phydev->dev),
4306 &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
4308 if (IS_ERR(phydev)) {
4309 dev_err(&adapter->pdev->dev, "Could not attach to PHY\n");
4310 return PTR_ERR(phydev);
4313 phydev->supported &= (SUPPORTED_10baseT_Half
4314 | SUPPORTED_10baseT_Full
4315 | SUPPORTED_100baseT_Half
4316 | SUPPORTED_100baseT_Full
4321 if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
4322 phydev->supported |= SUPPORTED_1000baseT_Full;
4324 phydev->advertising = phydev->supported;
4325 adapter->phydev = phydev;
4327 dev_info(&adapter->pdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
4328 phydev->drv->name, dev_name(&phydev->dev));
4334 * et131x_adapter_init
4335 * @adapter: pointer to the private adapter struct
4336 * @pdev: pointer to the PCI device
4338 * Initialize the data structures for the et131x_adapter object and link
4339 * them together with the platform provided device structures.
4341 static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
4342 struct pci_dev *pdev)
4344 static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
4346 struct et131x_adapter *adapter;
4348 /* Allocate private adapter struct and copy in relevant information */
4349 adapter = netdev_priv(netdev);
4350 adapter->pdev = pci_dev_get(pdev);
4351 adapter->netdev = netdev;
4353 /* Initialize spinlocks here */
4354 spin_lock_init(&adapter->lock);
4355 spin_lock_init(&adapter->tcb_send_qlock);
4356 spin_lock_init(&adapter->tcb_ready_qlock);
4357 spin_lock_init(&adapter->send_hw_lock);
4358 spin_lock_init(&adapter->rcv_lock);
4359 spin_lock_init(&adapter->rcv_pend_lock);
4360 spin_lock_init(&adapter->fbr_lock);
4361 spin_lock_init(&adapter->phy_lock);
4363 adapter->registry_jumbo_packet = 1514; /* 1514-9216 */
4365 /* Set the MAC address to a default */
4366 memcpy(adapter->addr, default_mac, ETH_ALEN);
4373 * @pdev: a pointer to the device's pci_dev structure
4375 * Registered in the pci_driver structure, this function is called when the
4376 * PCI subsystem detects that a PCI device which matches the information
4377 * contained in the pci_device_id table has been removed.
4379 static void __devexit et131x_pci_remove(struct pci_dev *pdev)
4381 struct net_device *netdev = pci_get_drvdata(pdev);
4382 struct et131x_adapter *adapter = netdev_priv(netdev);
4384 unregister_netdev(netdev);
4385 phy_disconnect(adapter->phydev);
4386 mdiobus_unregister(adapter->mii_bus);
4387 kfree(adapter->mii_bus->irq);
4388 mdiobus_free(adapter->mii_bus);
4390 et131x_adapter_memory_free(adapter);
4391 iounmap(adapter->regs);
4394 free_netdev(netdev);
4395 pci_release_regions(pdev);
4396 pci_disable_device(pdev);
4400 * et131x_up - Bring up a device for use.
4401 * @netdev: device to be opened
4403 static void et131x_up(struct net_device *netdev)
4405 struct et131x_adapter *adapter = netdev_priv(netdev);
4407 et131x_enable_txrx(netdev);
4408 phy_start(adapter->phydev);
4412 * et131x_down - Bring down the device
4413 * @netdev: device to be brought down
4415 static void et131x_down(struct net_device *netdev)
4417 struct et131x_adapter *adapter = netdev_priv(netdev);
4419 /* Save the timestamp for the TX watchdog, prevent a timeout */
4420 netdev->trans_start = jiffies;
4422 phy_stop(adapter->phydev);
4423 et131x_disable_txrx(netdev);
4426 #ifdef CONFIG_PM_SLEEP
4427 static int et131x_suspend(struct device *dev)
4429 struct pci_dev *pdev = to_pci_dev(dev);
4430 struct net_device *netdev = pci_get_drvdata(pdev);
4432 if (netif_running(netdev)) {
4433 netif_device_detach(netdev);
4434 et131x_down(netdev);
4435 pci_save_state(pdev);
4441 static int et131x_resume(struct device *dev)
4443 struct pci_dev *pdev = to_pci_dev(dev);
4444 struct net_device *netdev = pci_get_drvdata(pdev);
4446 if (netif_running(netdev)) {
4447 pci_restore_state(pdev);
4449 netif_device_attach(netdev);
4455 static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
4456 #define ET131X_PM_OPS (&et131x_pm_ops)
4458 #define ET131X_PM_OPS NULL
4462 * et131x_isr - The Interrupt Service Routine for the driver.
4463 * @irq: the IRQ on which the interrupt was received.
4464 * @dev_id: device-specific info (here a pointer to a net_device struct)
4466 * Returns a value indicating if the interrupt was handled.
4468 irqreturn_t et131x_isr(int irq, void *dev_id)
4470 bool handled = true;
4471 struct net_device *netdev = (struct net_device *)dev_id;
4472 struct et131x_adapter *adapter = NULL;
4475 if (!netif_device_present(netdev)) {
4480 adapter = netdev_priv(netdev);
4482 /* If the adapter is in low power state, then it should not
4483 * recognize any interrupt
4486 /* Disable Device Interrupts */
4487 et131x_disable_interrupts(adapter);
4489 /* Get a copy of the value in the interrupt status register
4490 * so we can process the interrupting section
4492 status = readl(&adapter->regs->global.int_status);
4494 if (adapter->flowcontrol == FLOW_TXONLY ||
4495 adapter->flowcontrol == FLOW_BOTH) {
4496 status &= ~INT_MASK_ENABLE;
4498 status &= ~INT_MASK_ENABLE_NO_FLOW;
4501 /* Make sure this is our interrupt */
4504 et131x_enable_interrupts(adapter);
4508 /* This is our interrupt, so process accordingly */
4510 if (status & ET_INTR_WATCHDOG) {
4511 struct tcb *tcb = adapter->tx_ring.send_head;
4514 if (++tcb->stale > 1)
4515 status |= ET_INTR_TXDMA_ISR;
4517 if (adapter->rx_ring.unfinished_receives)
4518 status |= ET_INTR_RXDMA_XFR_DONE;
4519 else if (tcb == NULL)
4520 writel(0, &adapter->regs->global.watchdog_timer);
4522 status &= ~ET_INTR_WATCHDOG;
4526 /* This interrupt has in some way been "handled" by
4527 * the ISR. Either it was a spurious Rx interrupt, or
4528 * it was a Tx interrupt that has been filtered by
4531 et131x_enable_interrupts(adapter);
4535 /* We need to save the interrupt status value for use in our
4536 * DPC. We will clear the software copy of that in that
4539 adapter->stats.interrupt_status = status;
4541 /* Schedule the ISR handler as a bottom-half task in the
4542 * kernel's tq_immediate queue, and mark the queue for
4545 schedule_work(&adapter->task);
4547 return IRQ_RETVAL(handled);
4551 * et131x_isr_handler - The ISR handler
4552 * @p_adapter, a pointer to the device's private adapter structure
4554 * scheduled to run in a deferred context by the ISR. This is where the ISR's
4555 * work actually gets done.
4557 static void et131x_isr_handler(struct work_struct *work)
4559 struct et131x_adapter *adapter =
4560 container_of(work, struct et131x_adapter, task);
4561 u32 status = adapter->stats.interrupt_status;
4562 struct address_map __iomem *iomem = adapter->regs;
4565 * These first two are by far the most common. Once handled, we clear
4566 * their two bits in the status word. If the word is now zero, we
4569 /* Handle all the completed Transmit interrupts */
4570 if (status & ET_INTR_TXDMA_ISR)
4571 et131x_handle_send_interrupt(adapter);
4573 /* Handle all the completed Receives interrupts */
4574 if (status & ET_INTR_RXDMA_XFR_DONE)
4575 et131x_handle_recv_interrupt(adapter);
4577 status &= 0xffffffd7;
4580 /* Handle the TXDMA Error interrupt */
4581 if (status & ET_INTR_TXDMA_ERR) {
4584 /* Following read also clears the register (COR) */
4585 txdma_err = readl(&iomem->txdma.tx_dma_error);
4587 dev_warn(&adapter->pdev->dev,
4588 "TXDMA_ERR interrupt, error = %d\n",
4592 /* Handle Free Buffer Ring 0 and 1 Low interrupt */
4594 (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
4596 * This indicates the number of unused buffers in
4597 * RXDMA free buffer ring 0 is <= the limit you
4598 * programmed. Free buffer resources need to be
4599 * returned. Free buffers are consumed as packets
4600 * are passed from the network to the host. The host
4601 * becomes aware of the packets from the contents of
4602 * the packet status ring. This ring is queried when
4603 * the packet done interrupt occurs. Packets are then
4604 * passed to the OS. When the OS is done with the
4605 * packets the resources can be returned to the
4606 * ET1310 for re-use. This interrupt is one method of
4607 * returning resources.
4610 /* If the user has flow control on, then we will
4611 * send a pause packet, otherwise just exit
4613 if (adapter->flowcontrol == FLOW_TXONLY ||
4614 adapter->flowcontrol == FLOW_BOTH) {
4617 /* Tell the device to send a pause packet via
4618 * the back pressure register (bp req and
4621 pm_csr = readl(&iomem->global.pm_csr);
4622 if (!et1310_in_phy_coma(adapter))
4623 writel(3, &iomem->txmac.bp_ctrl);
4627 /* Handle Packet Status Ring Low Interrupt */
4628 if (status & ET_INTR_RXDMA_STAT_LOW) {
4631 * Same idea as with the two Free Buffer Rings.
4632 * Packets going from the network to the host each
4633 * consume a free buffer resource and a packet status
4634 * resource. These resoures are passed to the OS.
4635 * When the OS is done with the resources, they need
4636 * to be returned to the ET1310. This is one method
4637 * of returning the resources.
4641 /* Handle RXDMA Error Interrupt */
4642 if (status & ET_INTR_RXDMA_ERR) {
4644 * The rxdma_error interrupt is sent when a time-out
4645 * on a request issued by the JAGCore has occurred or
4646 * a completion is returned with an un-successful
4647 * status. In both cases the request is considered
4648 * complete. The JAGCore will automatically re-try the
4649 * request in question. Normally information on events
4650 * like these are sent to the host using the "Advanced
4651 * Error Reporting" capability. This interrupt is
4652 * another way of getting similar information. The
4653 * only thing required is to clear the interrupt by
4654 * reading the ISR in the global resources. The
4655 * JAGCore will do a re-try on the request. Normally
4656 * you should never see this interrupt. If you start
4657 * to see this interrupt occurring frequently then
4658 * something bad has occurred. A reset might be the
4663 dev_warn(&adapter->pdev->dev,
4664 "RxDMA_ERR interrupt, error %x\n",
4665 readl(&iomem->txmac.tx_test));
4668 /* Handle the Wake on LAN Event */
4669 if (status & ET_INTR_WOL) {
4671 * This is a secondary interrupt for wake on LAN.
4672 * The driver should never see this, if it does,
4673 * something serious is wrong. We will TRAP the
4674 * message when we are in DBG mode, otherwise we
4677 dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n");
4680 /* Let's move on to the TxMac */
4681 if (status & ET_INTR_TXMAC) {
4682 u32 err = readl(&iomem->txmac.err);
4685 * When any of the errors occur and TXMAC generates
4686 * an interrupt to report these errors, it usually
4687 * means that TXMAC has detected an error in the data
4688 * stream retrieved from the on-chip Tx Q. All of
4689 * these errors are catastrophic and TXMAC won't be
4690 * able to recover data when these errors occur. In
4691 * a nutshell, the whole Tx path will have to be reset
4692 * and re-configured afterwards.
4694 dev_warn(&adapter->pdev->dev,
4695 "TXMAC interrupt, error 0x%08x\n",
4698 /* If we are debugging, we want to see this error,
4699 * otherwise we just want the device to be reset and
4704 /* Handle RXMAC Interrupt */
4705 if (status & ET_INTR_RXMAC) {
4707 * These interrupts are catastrophic to the device,
4708 * what we need to do is disable the interrupts and
4709 * set the flag to cause us to reset so we can solve
4712 /* MP_SET_FLAG( adapter,
4713 fMP_ADAPTER_HARDWARE_ERROR); */
4715 dev_warn(&adapter->pdev->dev,
4716 "RXMAC interrupt, error 0x%08x. Requesting reset\n",
4717 readl(&iomem->rxmac.err_reg));
4719 dev_warn(&adapter->pdev->dev,
4720 "Enable 0x%08x, Diag 0x%08x\n",
4721 readl(&iomem->rxmac.ctrl),
4722 readl(&iomem->rxmac.rxq_diag));
4725 * If we are debugging, we want to see this error,
4726 * otherwise we just want the device to be reset and
4731 /* Handle MAC_STAT Interrupt */
4732 if (status & ET_INTR_MAC_STAT) {
4734 * This means at least one of the un-masked counters
4735 * in the MAC_STAT block has rolled over. Use this
4736 * to maintain the top, software managed bits of the
4739 et1310_handle_macstat_interrupt(adapter);
4742 /* Handle SLV Timeout Interrupt */
4743 if (status & ET_INTR_SLV_TIMEOUT) {
4745 * This means a timeout has occurred on a read or
4746 * write request to one of the JAGCore registers. The
4747 * Global Resources block has terminated the request
4748 * and on a read request, returned a "fake" value.
4749 * The most likely reasons are: Bad Address or the
4750 * addressed module is in a power-down state and
4755 et131x_enable_interrupts(adapter);
4759 * et131x_stats - Return the current device statistics.
4760 * @netdev: device whose stats are being queried
4762 * Returns 0 on success, errno on failure (as defined in errno.h)
4764 static struct net_device_stats *et131x_stats(struct net_device *netdev)
4766 struct et131x_adapter *adapter = netdev_priv(netdev);
4767 struct net_device_stats *stats = &adapter->net_stats;
4768 struct ce_stats *devstat = &adapter->stats;
4770 stats->rx_errors = devstat->rx_length_errs +
4771 devstat->rx_align_errs +
4772 devstat->rx_crc_errs +
4773 devstat->rx_code_violations +
4774 devstat->rx_other_errs;
4775 stats->tx_errors = devstat->tx_max_pkt_errs;
4776 stats->multicast = devstat->multicast_pkts_rcvd;
4777 stats->collisions = devstat->tx_collisions;
4779 stats->rx_length_errors = devstat->rx_length_errs;
4780 stats->rx_over_errors = devstat->rx_overflows;
4781 stats->rx_crc_errors = devstat->rx_crc_errs;
4783 /* NOTE: These stats don't have corresponding values in CE_STATS,
4784 * so we're going to have to update these directly from within the
4787 /* stats->rx_bytes = 20; devstat->; */
4788 /* stats->tx_bytes = 20; devstat->; */
4789 /* stats->rx_dropped = devstat->; */
4790 /* stats->tx_dropped = devstat->; */
4792 /* NOTE: Not used, can't find analogous statistics */
4793 /* stats->rx_frame_errors = devstat->; */
4794 /* stats->rx_fifo_errors = devstat->; */
4795 /* stats->rx_missed_errors = devstat->; */
4797 /* stats->tx_aborted_errors = devstat->; */
4798 /* stats->tx_carrier_errors = devstat->; */
4799 /* stats->tx_fifo_errors = devstat->; */
4800 /* stats->tx_heartbeat_errors = devstat->; */
4801 /* stats->tx_window_errors = devstat->; */
4806 * et131x_open - Open the device for use.
4807 * @netdev: device to be opened
4809 * Returns 0 on success, errno on failure (as defined in errno.h)
4811 static int et131x_open(struct net_device *netdev)
4813 struct et131x_adapter *adapter = netdev_priv(netdev);
4814 struct pci_dev *pdev = adapter->pdev;
4815 unsigned int irq = pdev->irq;
4818 /* Start the timer to track NIC errors */
4819 init_timer(&adapter->error_timer);
4820 adapter->error_timer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000;
4821 adapter->error_timer.function = et131x_error_timer_handler;
4822 adapter->error_timer.data = (unsigned long)adapter;
4823 add_timer(&adapter->error_timer);
4825 result = request_irq(irq, et131x_isr,
4826 IRQF_SHARED, netdev->name, netdev);
4828 dev_err(&pdev->dev, "could not register IRQ %d\n", irq);
4832 adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
4840 * et131x_close - Close the device
4841 * @netdev: device to be closed
4843 * Returns 0 on success, errno on failure (as defined in errno.h)
4845 static int et131x_close(struct net_device *netdev)
4847 struct et131x_adapter *adapter = netdev_priv(netdev);
4849 et131x_down(netdev);
4851 adapter->flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
4852 free_irq(adapter->pdev->irq, netdev);
4854 /* Stop the error timer */
4855 return del_timer_sync(&adapter->error_timer);
4859 * et131x_ioctl - The I/O Control handler for the driver
4860 * @netdev: device on which the control request is being made
4861 * @reqbuf: a pointer to the IOCTL request buffer
4862 * @cmd: the IOCTL command code
4864 * Returns 0 on success, errno on failure (as defined in errno.h)
4866 static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf,
4869 struct et131x_adapter *adapter = netdev_priv(netdev);
4871 if (!adapter->phydev)
4874 return phy_mii_ioctl(adapter->phydev, reqbuf, cmd);
4878 * et131x_set_packet_filter - Configures the Rx Packet filtering on the device
4879 * @adapter: pointer to our private adapter structure
4881 * FIXME: lot of dups with MAC code
4883 * Returns 0 on success, errno on failure
4885 static int et131x_set_packet_filter(struct et131x_adapter *adapter)
4887 int filter = adapter->packet_filter;
4892 ctrl = readl(&adapter->regs->rxmac.ctrl);
4893 pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl);
4895 /* Default to disabled packet filtering. Enable it in the individual
4896 * case statements that require the device to filter something
4900 /* Set us to be in promiscuous mode so we receive everything, this
4901 * is also true when we get a packet filter of 0
4903 if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0)
4904 pf_ctrl &= ~7; /* Clear filter bits */
4907 * Set us up with Multicast packet filtering. Three cases are
4908 * possible - (1) we have a multi-cast list, (2) we receive ALL
4909 * multicast entries or (3) we receive none.
4911 if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST)
4912 pf_ctrl &= ~2; /* Multicast filter bit */
4914 et1310_setup_device_for_multicast(adapter);
4919 /* Set us up with Unicast packet filtering */
4920 if (filter & ET131X_PACKET_TYPE_DIRECTED) {
4921 et1310_setup_device_for_unicast(adapter);
4926 /* Set us up with Broadcast packet filtering */
4927 if (filter & ET131X_PACKET_TYPE_BROADCAST) {
4928 pf_ctrl |= 1; /* Broadcast filter bit */
4933 /* Setup the receive mac configuration registers - Packet
4934 * Filter control + the enable / disable for packet filter
4935 * in the control reg.
4937 writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl);
4938 writel(ctrl, &adapter->regs->rxmac.ctrl);
4944 * et131x_multicast - The handler to configure multicasting on the interface
4945 * @netdev: a pointer to a net_device struct representing the device
4947 static void et131x_multicast(struct net_device *netdev)
4949 struct et131x_adapter *adapter = netdev_priv(netdev);
4951 unsigned long flags;
4952 struct netdev_hw_addr *ha;
4955 spin_lock_irqsave(&adapter->lock, flags);
4957 /* Before we modify the platform-independent filter flags, store them
4958 * locally. This allows us to determine if anything's changed and if
4959 * we even need to bother the hardware
4961 packet_filter = adapter->packet_filter;
4963 /* Clear the 'multicast' flag locally; because we only have a single
4964 * flag to check multicast, and multiple multicast addresses can be
4965 * set, this is the easiest way to determine if more than one
4966 * multicast address is being set.
4968 packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST;
4970 /* Check the net_device flags and set the device independent flags
4974 if (netdev->flags & IFF_PROMISC)
4975 adapter->packet_filter |= ET131X_PACKET_TYPE_PROMISCUOUS;
4977 adapter->packet_filter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
4979 if (netdev->flags & IFF_ALLMULTI)
4980 adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
4982 if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)
4983 adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
4985 if (netdev_mc_count(netdev) < 1) {
4986 adapter->packet_filter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
4987 adapter->packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST;
4989 adapter->packet_filter |= ET131X_PACKET_TYPE_MULTICAST;
4991 /* Set values in the private adapter struct */
4993 netdev_for_each_mc_addr(ha, netdev) {
4994 if (i == NIC_MAX_MCAST_LIST)
4996 memcpy(adapter->multicast_list[i++], ha->addr, ETH_ALEN);
4998 adapter->multicast_addr_count = i;
5000 /* Are the new flags different from the previous ones? If not, then no
5001 * action is required
5003 * NOTE - This block will always update the multicast_list with the
5004 * hardware, even if the addresses aren't the same.
5006 if (packet_filter != adapter->packet_filter) {
5007 /* Call the device's filter function */
5008 et131x_set_packet_filter(adapter);
5010 spin_unlock_irqrestore(&adapter->lock, flags);
5014 * et131x_tx - The handler to tx a packet on the device
5015 * @skb: data to be Tx'd
5016 * @netdev: device on which data is to be Tx'd
5018 * Returns 0 on success, errno on failure (as defined in errno.h)
5020 static int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
5023 struct et131x_adapter *adapter = netdev_priv(netdev);
5025 /* stop the queue if it's getting full */
5026 if (adapter->tx_ring.used >= NUM_TCB - 1 &&
5027 !netif_queue_stopped(netdev))
5028 netif_stop_queue(netdev);
5030 /* Save the timestamp for the TX timeout watchdog */
5031 netdev->trans_start = jiffies;
5033 /* Call the device-specific data Tx routine */
5034 status = et131x_send_packets(skb, netdev);
5036 /* Check status and manage the netif queue if necessary */
5038 if (status == -ENOMEM)
5039 status = NETDEV_TX_BUSY;
5041 status = NETDEV_TX_OK;
5047 * et131x_tx_timeout - Timeout handler
5048 * @netdev: a pointer to a net_device struct representing the device
5050 * The handler called when a Tx request times out. The timeout period is
5051 * specified by the 'tx_timeo" element in the net_device structure (see
5052 * et131x_alloc_device() to see how this value is set).
5054 static void et131x_tx_timeout(struct net_device *netdev)
5056 struct et131x_adapter *adapter = netdev_priv(netdev);
5058 unsigned long flags;
5060 /* If the device is closed, ignore the timeout */
5061 if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE))
5064 /* Any nonrecoverable hardware error?
5065 * Checks adapter->flags for any failure in phy reading
5067 if (adapter->flags & fMP_ADAPTER_NON_RECOVER_ERROR)
5070 /* Hardware failure? */
5071 if (adapter->flags & fMP_ADAPTER_HARDWARE_ERROR) {
5072 dev_err(&adapter->pdev->dev, "hardware error - reset\n");
5076 /* Is send stuck? */
5077 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
5079 tcb = adapter->tx_ring.send_head;
5084 if (tcb->count > NIC_SEND_HANG_THRESHOLD) {
5085 spin_unlock_irqrestore(&adapter->tcb_send_qlock,
5088 dev_warn(&adapter->pdev->dev,
5089 "Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n",
5093 adapter->net_stats.tx_errors++;
5095 /* perform reset of tx/rx */
5096 et131x_disable_txrx(netdev);
5097 et131x_enable_txrx(netdev);
5102 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
5106 * et131x_change_mtu - The handler called to change the MTU for the device
5107 * @netdev: device whose MTU is to be changed
5108 * @new_mtu: the desired MTU
5110 * Returns 0 on success, errno on failure (as defined in errno.h)
5112 static int et131x_change_mtu(struct net_device *netdev, int new_mtu)
5115 struct et131x_adapter *adapter = netdev_priv(netdev);
5117 /* Make sure the requested MTU is valid */
5118 if (new_mtu < 64 || new_mtu > 9216)
5121 et131x_disable_txrx(netdev);
5122 et131x_handle_send_interrupt(adapter);
5123 et131x_handle_recv_interrupt(adapter);
5125 /* Set the new MTU */
5126 netdev->mtu = new_mtu;
5128 /* Free Rx DMA memory */
5129 et131x_adapter_memory_free(adapter);
5131 /* Set the config parameter for Jumbo Packet support */
5132 adapter->registry_jumbo_packet = new_mtu + 14;
5133 et131x_soft_reset(adapter);
5135 /* Alloc and init Rx DMA memory */
5136 result = et131x_adapter_memory_alloc(adapter);
5138 dev_warn(&adapter->pdev->dev,
5139 "Change MTU failed; couldn't re-alloc DMA memory\n");
5143 et131x_init_send(adapter);
5145 et131x_hwaddr_init(adapter);
5146 memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
5148 /* Init the device with the new settings */
5149 et131x_adapter_setup(adapter);
5151 et131x_enable_txrx(netdev);
5157 * et131x_set_mac_addr - handler to change the MAC address for the device
5158 * @netdev: device whose MAC is to be changed
5159 * @new_mac: the desired MAC address
5161 * Returns 0 on success, errno on failure (as defined in errno.h)
5163 * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
5165 static int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
5168 struct et131x_adapter *adapter = netdev_priv(netdev);
5169 struct sockaddr *address = new_mac;
5173 if (adapter == NULL)
5176 /* Make sure the requested MAC is valid */
5177 if (!is_valid_ether_addr(address->sa_data))
5178 return -EADDRNOTAVAIL;
5180 et131x_disable_txrx(netdev);
5181 et131x_handle_send_interrupt(adapter);
5182 et131x_handle_recv_interrupt(adapter);
5184 /* Set the new MAC */
5185 /* netdev->set_mac_address = &new_mac; */
5187 memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
5189 printk(KERN_INFO "%s: Setting MAC address to %pM\n",
5190 netdev->name, netdev->dev_addr);
5192 /* Free Rx DMA memory */
5193 et131x_adapter_memory_free(adapter);
5195 et131x_soft_reset(adapter);
5197 /* Alloc and init Rx DMA memory */
5198 result = et131x_adapter_memory_alloc(adapter);
5200 dev_err(&adapter->pdev->dev,
5201 "Change MAC failed; couldn't re-alloc DMA memory\n");
5205 et131x_init_send(adapter);
5207 et131x_hwaddr_init(adapter);
5209 /* Init the device with the new settings */
5210 et131x_adapter_setup(adapter);
5212 et131x_enable_txrx(netdev);
5217 static const struct net_device_ops et131x_netdev_ops = {
5218 .ndo_open = et131x_open,
5219 .ndo_stop = et131x_close,
5220 .ndo_start_xmit = et131x_tx,
5221 .ndo_set_rx_mode = et131x_multicast,
5222 .ndo_tx_timeout = et131x_tx_timeout,
5223 .ndo_change_mtu = et131x_change_mtu,
5224 .ndo_set_mac_address = et131x_set_mac_addr,
5225 .ndo_validate_addr = eth_validate_addr,
5226 .ndo_get_stats = et131x_stats,
5227 .ndo_do_ioctl = et131x_ioctl,
5231 * et131x_pci_setup - Perform device initialization
5232 * @pdev: a pointer to the device's pci_dev structure
5233 * @ent: this device's entry in the pci_device_id table
5235 * Returns 0 on success, errno on failure (as defined in errno.h)
5237 * Registered in the pci_driver structure, this function is called when the
5238 * PCI subsystem finds a new PCI device which matches the information
5239 * contained in the pci_device_id table. This routine is the equivalent to
5240 * a device insertion routine.
5242 static int __devinit et131x_pci_setup(struct pci_dev *pdev,
5243 const struct pci_device_id *ent)
5245 struct net_device *netdev;
5246 struct et131x_adapter *adapter;
5250 rc = pci_enable_device(pdev);
5252 dev_err(&pdev->dev, "pci_enable_device() failed\n");
5256 /* Perform some basic PCI checks */
5257 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
5258 dev_err(&pdev->dev, "Can't find PCI device's base address\n");
5263 rc = pci_request_regions(pdev, DRIVER_NAME);
5265 dev_err(&pdev->dev, "Can't get PCI resources\n");
5269 pci_set_master(pdev);
5271 /* Check the DMA addressing support of this device */
5272 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
5273 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
5276 "Unable to obtain 64 bit DMA for consistent allocations\n");
5277 goto err_release_res;
5279 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
5280 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
5283 "Unable to obtain 32 bit DMA for consistent allocations\n");
5284 goto err_release_res;
5287 dev_err(&pdev->dev, "No usable DMA addressing method\n");
5289 goto err_release_res;
5292 /* Allocate netdev and private adapter structs */
5293 netdev = alloc_etherdev(sizeof(struct et131x_adapter));
5295 dev_err(&pdev->dev, "Couldn't alloc netdev struct\n");
5297 goto err_release_res;
5300 netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
5301 netdev->netdev_ops = &et131x_netdev_ops;
5303 SET_NETDEV_DEV(netdev, &pdev->dev);
5304 et131x_set_ethtool_ops(netdev);
5306 adapter = et131x_adapter_init(netdev, pdev);
5308 rc = et131x_pci_init(adapter, pdev);
5312 /* Map the bus-relative registers to system virtual memory */
5313 adapter->regs = pci_ioremap_bar(pdev, 0);
5314 if (!adapter->regs) {
5315 dev_err(&pdev->dev, "Cannot map device registers\n");
5320 /* If Phy COMA mode was enabled when we went down, disable it here. */
5321 writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr);
5323 /* Issue a global reset to the et1310 */
5324 et131x_soft_reset(adapter);
5326 /* Disable all interrupts (paranoid) */
5327 et131x_disable_interrupts(adapter);
5329 /* Allocate DMA memory */
5330 rc = et131x_adapter_memory_alloc(adapter);
5332 dev_err(&pdev->dev, "Could not alloc adapater memory (DMA)\n");
5336 /* Init send data structures */
5337 et131x_init_send(adapter);
5339 /* Set up the task structure for the ISR's deferred handler */
5340 INIT_WORK(&adapter->task, et131x_isr_handler);
5342 /* Copy address into the net_device struct */
5343 memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
5345 /* Init variable for counting how long we do not have link status */
5346 adapter->boot_coma = 0;
5347 et1310_disable_phy_coma(adapter);
5351 /* Setup the mii_bus struct */
5352 adapter->mii_bus = mdiobus_alloc();
5353 if (!adapter->mii_bus) {
5354 dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n");
5358 adapter->mii_bus->name = "et131x_eth_mii";
5359 snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x",
5360 (adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
5361 adapter->mii_bus->priv = netdev;
5362 adapter->mii_bus->read = et131x_mdio_read;
5363 adapter->mii_bus->write = et131x_mdio_write;
5364 adapter->mii_bus->reset = et131x_mdio_reset;
5365 adapter->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
5366 if (!adapter->mii_bus->irq) {
5367 dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
5371 for (ii = 0; ii < PHY_MAX_ADDR; ii++)
5372 adapter->mii_bus->irq[ii] = PHY_POLL;
5374 rc = mdiobus_register(adapter->mii_bus);
5376 dev_err(&pdev->dev, "failed to register MII bus\n");
5377 goto err_mdio_free_irq;
5380 rc = et131x_mii_probe(netdev);
5382 dev_err(&pdev->dev, "failed to probe MII bus\n");
5383 goto err_mdio_unregister;
5386 /* Setup et1310 as per the documentation */
5387 et131x_adapter_setup(adapter);
5389 /* We can enable interrupts now
5391 * NOTE - Because registration of interrupt handler is done in the
5392 * device's open(), defer enabling device interrupts to that
5396 /* Register the net_device struct with the Linux network layer */
5397 rc = register_netdev(netdev);
5399 dev_err(&pdev->dev, "register_netdev() failed\n");
5400 goto err_phy_disconnect;
5403 /* Register the net_device struct with the PCI subsystem. Save a copy
5404 * of the PCI config space for this device now that the device has
5405 * been initialized, just in case it needs to be quickly restored.
5407 pci_set_drvdata(pdev, netdev);
5412 phy_disconnect(adapter->phydev);
5413 err_mdio_unregister:
5414 mdiobus_unregister(adapter->mii_bus);
5416 kfree(adapter->mii_bus->irq);
5418 mdiobus_free(adapter->mii_bus);
5420 et131x_adapter_memory_free(adapter);
5422 iounmap(adapter->regs);
5425 free_netdev(netdev);
5427 pci_release_regions(pdev);
5429 pci_disable_device(pdev);
5433 static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = {
5434 { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL},
5435 { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL},
5438 MODULE_DEVICE_TABLE(pci, et131x_pci_table);
5440 static struct pci_driver et131x_driver = {
5441 .name = DRIVER_NAME,
5442 .id_table = et131x_pci_table,
5443 .probe = et131x_pci_setup,
5444 .remove = __devexit_p(et131x_pci_remove),
5445 .driver.pm = ET131X_PM_OPS,
5449 * et131x_init_module - The "main" entry point called on driver initialization
5451 * Returns 0 on success, errno on failure (as defined in errno.h)
5453 static int __init et131x_init_module(void)
5455 return pci_register_driver(&et131x_driver);
5459 * et131x_cleanup_module - The entry point called on driver cleanup
5461 static void __exit et131x_cleanup_module(void)
5463 pci_unregister_driver(&et131x_driver);
5466 module_init(et131x_init_module);
5467 module_exit(et131x_cleanup_module);