drivers/spi/spi-imx.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 // Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
   3 // Copyright (C) 2008 Juergen Beisert
   4
   5 #include <linux/clk.h>
   6 #include <linux/completion.h>
   7 #include <linux/delay.h>
   8 #include <linux/dmaengine.h>
   9 #include <linux/dma-mapping.h>
  10 #include <linux/err.h>
  11 #include <linux/interrupt.h>
  12 #include <linux/io.h>
  13 #include <linux/irq.h>
  14 #include <linux/kernel.h>
  15 #include <linux/module.h>
  16 #include <linux/pinctrl/consumer.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/pm_runtime.h>
  19 #include <linux/slab.h>
  20 #include <linux/spi/spi.h>
  21 #include <linux/types.h>
  22 #include <linux/of.h>
  23 #include <linux/property.h>
  24
  25 #include <linux/dma/imx-dma.h>
  26
  27 #define DRIVER_NAME "spi_imx"
  28
  29 static bool use_dma = true;
  30 module_param(use_dma, bool, 0644);
  31 MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
  32
  33 /* define polling limits */
  34 static unsigned int polling_limit_us = 30;
  35 module_param(polling_limit_us, uint, 0664);
  36 MODULE_PARM_DESC(polling_limit_us,
  37                  "time in us to run a transfer in polling mode\n");
  38
  39 #define MXC_RPM_TIMEOUT         2000 /* 2000ms */
  40
  41 #define MXC_CSPIRXDATA          0x00
  42 #define MXC_CSPITXDATA          0x04
  43 #define MXC_CSPICTRL            0x08
  44 #define MXC_CSPIINT             0x0c
  45 #define MXC_RESET               0x1c
  46
  47 /* generic defines to abstract from the different register layouts */
  48 #define MXC_INT_RR      (1 << 0) /* Receive data ready interrupt */
  49 #define MXC_INT_TE      (1 << 1) /* Transmit FIFO empty interrupt */
  50 #define MXC_INT_RDR     BIT(4) /* Receive date threshold interrupt */
  51
  52 /* The maximum bytes that a sdma BD can transfer. */
  53 #define MAX_SDMA_BD_BYTES (1 << 15)
  54 #define MX51_ECSPI_CTRL_MAX_BURST       512
  55 /* The maximum bytes that IMX53_ECSPI can transfer in target mode.*/
  56 #define MX53_MAX_TRANSFER_BYTES         512
  57
  58 enum spi_imx_devtype {
  59         IMX1_CSPI,
  60         IMX21_CSPI,
  61         IMX27_CSPI,
  62         IMX31_CSPI,
  63         IMX35_CSPI,     /* CSPI on all i.mx except above */
  64         IMX51_ECSPI,    /* ECSPI on i.mx51 */
  65         IMX53_ECSPI,    /* ECSPI on i.mx53 and later */
  66 };
  67
  68 struct spi_imx_data;
  69
  70 struct spi_imx_devtype_data {
  71         void (*intctrl)(struct spi_imx_data *spi_imx, int enable);
  72         int (*prepare_message)(struct spi_imx_data *spi_imx, struct spi_message *msg);
  73         int (*prepare_transfer)(struct spi_imx_data *spi_imx, struct spi_device *spi);
  74         void (*trigger)(struct spi_imx_data *spi_imx);
  75         int (*rx_available)(struct spi_imx_data *spi_imx);
  76         void (*reset)(struct spi_imx_data *spi_imx);
  77         void (*setup_wml)(struct spi_imx_data *spi_imx);
  78         void (*disable)(struct spi_imx_data *spi_imx);
  79         bool has_dmamode;
  80         bool has_targetmode;
  81         unsigned int fifo_size;
  82         bool dynamic_burst;
  83         /*
  84          * ERR009165 fixed or not:
  85          * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
  86          */
  87         bool tx_glitch_fixed;
  88         enum spi_imx_devtype devtype;
  89 };
  90
  91 struct spi_imx_data {
  92         struct spi_controller *controller;
  93         struct device *dev;
  94
  95         struct completion xfer_done;
  96         void __iomem *base;
  97         unsigned long base_phys;
  98
  99         struct clk *clk_per;
 100         struct clk *clk_ipg;
 101         unsigned long spi_clk;
 102         unsigned int spi_bus_clk;
 103
 104         unsigned int bits_per_word;
 105         unsigned int spi_drctl;
 106
 107         unsigned int count, remainder;
 108         void (*tx)(struct spi_imx_data *spi_imx);
 109         void (*rx)(struct spi_imx_data *spi_imx);
 110         void *rx_buf;
 111         const void *tx_buf;
 112         unsigned int txfifo; /* number of words pushed in tx FIFO */
 113         unsigned int dynamic_burst;
 114         bool rx_only;
 115
 116         /* Target mode */
 117         bool target_mode;
 118         bool target_aborted;
 119         unsigned int target_burst;
 120
 121         /* DMA */
 122         bool usedma;
 123         u32 wml;
 124         struct completion dma_rx_completion;
 125         struct completion dma_tx_completion;
 126
 127         const struct spi_imx_devtype_data *devtype_data;
 128 };
 129
 130 static inline int is_imx27_cspi(struct spi_imx_data *d)
 131 {
 132         return d->devtype_data->devtype == IMX27_CSPI;
 133 }
 134
 135 static inline int is_imx35_cspi(struct spi_imx_data *d)
 136 {
 137         return d->devtype_data->devtype == IMX35_CSPI;
 138 }
 139
 140 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 141 {
 142         return d->devtype_data->devtype == IMX51_ECSPI;
 143 }
 144
 145 static inline int is_imx53_ecspi(struct spi_imx_data *d)
 146 {
 147         return d->devtype_data->devtype == IMX53_ECSPI;
 148 }
 149
 150 #define MXC_SPI_BUF_RX(type)                                            \
 151 static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx)         \
 152 {                                                                       \
 153         unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);       \
 154                                                                         \
 155         if (spi_imx->rx_buf) {                                          \
 156                 *(type *)spi_imx->rx_buf = val;                         \
 157                 spi_imx->rx_buf += sizeof(type);                        \
 158         }                                                               \
 159                                                                         \
 160         spi_imx->remainder -= sizeof(type);                             \
 161 }
 162
 163 #define MXC_SPI_BUF_TX(type)                                            \
 164 static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx)         \
 165 {                                                                       \
 166         type val = 0;                                                   \
 167                                                                         \
 168         if (spi_imx->tx_buf) {                                          \
 169                 val = *(type *)spi_imx->tx_buf;                         \
 170                 spi_imx->tx_buf += sizeof(type);                        \
 171         }                                                               \
 172                                                                         \
 173         spi_imx->count -= sizeof(type);                                 \
 174                                                                         \
 175         writel(val, spi_imx->base + MXC_CSPITXDATA);                    \
 176 }
 177
 178 MXC_SPI_BUF_RX(u8)
 179 MXC_SPI_BUF_TX(u8)
 180 MXC_SPI_BUF_RX(u16)
 181 MXC_SPI_BUF_TX(u16)
 182 MXC_SPI_BUF_RX(u32)
 183 MXC_SPI_BUF_TX(u32)
 184
 185 /* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
 186  * (which is currently not the case in this driver)
 187  */
 188 static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
 189         256, 384, 512, 768, 1024};
 190
 191 /* MX21, MX27 */
 192 static unsigned int spi_imx_clkdiv_1(unsigned int fin,
 193                 unsigned int fspi, unsigned int max, unsigned int *fres)
 194 {
 195         int i;
 196
 197         for (i = 2; i < max; i++)
 198                 if (fspi * mxc_clkdivs[i] >= fin)
 199                         break;
 200
 201         *fres = fin / mxc_clkdivs[i];
 202         return i;
 203 }
 204
 205 /* MX1, MX31, MX35, MX51 CSPI */
 206 static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 207                 unsigned int fspi, unsigned int *fres)
 208 {
 209         int i, div = 4;
 210
 211         for (i = 0; i < 7; i++) {
 212                 if (fspi * div >= fin)
 213                         goto out;
 214                 div <<= 1;
 215         }
 216
 217 out:
 218         *fres = fin / div;
 219         return i;
 220 }
 221
 222 static int spi_imx_bytes_per_word(const int bits_per_word)
 223 {
 224         if (bits_per_word <= 8)
 225                 return 1;
 226         else if (bits_per_word <= 16)
 227                 return 2;
 228         else
 229                 return 4;
 230 }
 231
 232 static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device *spi,
 233                          struct spi_transfer *transfer)
 234 {
 235         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
 236
 237         if (!use_dma || controller->fallback)
 238                 return false;
 239
 240         if (!controller->dma_rx)
 241                 return false;
 242
 243         if (spi_imx->target_mode)
 244                 return false;
 245
 246         if (transfer->len < spi_imx->devtype_data->fifo_size)
 247                 return false;
 248
 249         spi_imx->dynamic_burst = 0;
 250
 251         return true;
 252 }
 253
 254 /*
 255  * Note the number of natively supported chip selects for MX51 is 4. Some
 256  * devices may have less actual SS pins but the register map supports 4. When
 257  * using gpio chip selects the cs values passed into the macros below can go
 258  * outside the range 0 - 3. We therefore need to limit the cs value to avoid
 259  * corrupting bits outside the allocated locations.
 260  *
 261  * The simplest way to do this is to just mask the cs bits to 2 bits. This
 262  * still allows all 4 native chip selects to work as well as gpio chip selects
 263  * (which can use any of the 4 chip select configurations).
 264  */
 265
 266 #define MX51_ECSPI_CTRL         0x08
 267 #define MX51_ECSPI_CTRL_ENABLE          (1 <<  0)
 268 #define MX51_ECSPI_CTRL_XCH             (1 <<  2)
 269 #define MX51_ECSPI_CTRL_SMC             (1 << 3)
 270 #define MX51_ECSPI_CTRL_MODE_MASK       (0xf << 4)
 271 #define MX51_ECSPI_CTRL_DRCTL(drctl)    ((drctl) << 16)
 272 #define MX51_ECSPI_CTRL_POSTDIV_OFFSET  8
 273 #define MX51_ECSPI_CTRL_PREDIV_OFFSET   12
 274 #define MX51_ECSPI_CTRL_CS(cs)          ((cs & 3) << 18)
 275 #define MX51_ECSPI_CTRL_BL_OFFSET       20
 276 #define MX51_ECSPI_CTRL_BL_MASK         (0xfff << 20)
 277
 278 #define MX51_ECSPI_CONFIG       0x0c
 279 #define MX51_ECSPI_CONFIG_SCLKPHA(cs)   (1 << ((cs & 3) +  0))
 280 #define MX51_ECSPI_CONFIG_SCLKPOL(cs)   (1 << ((cs & 3) +  4))
 281 #define MX51_ECSPI_CONFIG_SBBCTRL(cs)   (1 << ((cs & 3) +  8))
 282 #define MX51_ECSPI_CONFIG_SSBPOL(cs)    (1 << ((cs & 3) + 12))
 283 #define MX51_ECSPI_CONFIG_DATACTL(cs)   (1 << ((cs & 3) + 16))
 284 #define MX51_ECSPI_CONFIG_SCLKCTL(cs)   (1 << ((cs & 3) + 20))
 285
 286 #define MX51_ECSPI_INT          0x10
 287 #define MX51_ECSPI_INT_TEEN             (1 <<  0)
 288 #define MX51_ECSPI_INT_RREN             (1 <<  3)
 289 #define MX51_ECSPI_INT_RDREN            (1 <<  4)
 290
 291 #define MX51_ECSPI_DMA          0x14
 292 #define MX51_ECSPI_DMA_TX_WML(wml)      ((wml) & 0x3f)
 293 #define MX51_ECSPI_DMA_RX_WML(wml)      (((wml) & 0x3f) << 16)
 294 #define MX51_ECSPI_DMA_RXT_WML(wml)     (((wml) & 0x3f) << 24)
 295
 296 #define MX51_ECSPI_DMA_TEDEN            (1 << 7)
 297 #define MX51_ECSPI_DMA_RXDEN            (1 << 23)
 298 #define MX51_ECSPI_DMA_RXTDEN           (1 << 31)
 299
 300 #define MX51_ECSPI_STAT         0x18
 301 #define MX51_ECSPI_STAT_RR              (1 <<  3)
 302
 303 #define MX51_ECSPI_TESTREG      0x20
 304 #define MX51_ECSPI_TESTREG_LBC  BIT(31)
 305
 306 static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
 307 {
 308         unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
 309
 310         if (spi_imx->rx_buf) {
 311 #ifdef __LITTLE_ENDIAN
 312                 unsigned int bytes_per_word;
 313
 314                 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 315                 if (bytes_per_word == 1)
 316                         swab32s(&val);
 317                 else if (bytes_per_word == 2)
 318                         swahw32s(&val);
 319 #endif
 320                 *(u32 *)spi_imx->rx_buf = val;
 321                 spi_imx->rx_buf += sizeof(u32);
 322         }
 323
 324         spi_imx->remainder -= sizeof(u32);
 325 }
 326
 327 static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
 328 {
 329         int unaligned;
 330         u32 val;
 331
 332         unaligned = spi_imx->remainder % 4;
 333
 334         if (!unaligned) {
 335                 spi_imx_buf_rx_swap_u32(spi_imx);
 336                 return;
 337         }
 338
 339         if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
 340                 spi_imx_buf_rx_u16(spi_imx);
 341                 return;
 342         }
 343
 344         val = readl(spi_imx->base + MXC_CSPIRXDATA);
 345
 346         while (unaligned--) {
 347                 if (spi_imx->rx_buf) {
 348                         *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
 349                         spi_imx->rx_buf++;
 350                 }
 351                 spi_imx->remainder--;
 352         }
 353 }
 354
 355 static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
 356 {
 357         u32 val = 0;
 358 #ifdef __LITTLE_ENDIAN
 359         unsigned int bytes_per_word;
 360 #endif
 361
 362         if (spi_imx->tx_buf) {
 363                 val = *(u32 *)spi_imx->tx_buf;
 364                 spi_imx->tx_buf += sizeof(u32);
 365         }
 366
 367         spi_imx->count -= sizeof(u32);
 368 #ifdef __LITTLE_ENDIAN
 369         bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 370
 371         if (bytes_per_word == 1)
 372                 swab32s(&val);
 373         else if (bytes_per_word == 2)
 374                 swahw32s(&val);
 375 #endif
 376         writel(val, spi_imx->base + MXC_CSPITXDATA);
 377 }
 378
 379 static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
 380 {
 381         int unaligned;
 382         u32 val = 0;
 383
 384         unaligned = spi_imx->count % 4;
 385
 386         if (!unaligned) {
 387                 spi_imx_buf_tx_swap_u32(spi_imx);
 388                 return;
 389         }
 390
 391         if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
 392                 spi_imx_buf_tx_u16(spi_imx);
 393                 return;
 394         }
 395
 396         while (unaligned--) {
 397                 if (spi_imx->tx_buf) {
 398                         val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
 399                         spi_imx->tx_buf++;
 400                 }
 401                 spi_imx->count--;
 402         }
 403
 404         writel(val, spi_imx->base + MXC_CSPITXDATA);
 405 }
 406
 407 static void mx53_ecspi_rx_target(struct spi_imx_data *spi_imx)
 408 {
 409         u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
 410
 411         if (spi_imx->rx_buf) {
 412                 int n_bytes = spi_imx->target_burst % sizeof(val);
 413
 414                 if (!n_bytes)
 415                         n_bytes = sizeof(val);
 416
 417                 memcpy(spi_imx->rx_buf,
 418                        ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
 419
 420                 spi_imx->rx_buf += n_bytes;
 421                 spi_imx->target_burst -= n_bytes;
 422         }
 423
 424         spi_imx->remainder -= sizeof(u32);
 425 }
 426
 427 static void mx53_ecspi_tx_target(struct spi_imx_data *spi_imx)
 428 {
 429         u32 val = 0;
 430         int n_bytes = spi_imx->count % sizeof(val);
 431
 432         if (!n_bytes)
 433                 n_bytes = sizeof(val);
 434
 435         if (spi_imx->tx_buf) {
 436                 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
 437                        spi_imx->tx_buf, n_bytes);
 438                 val = cpu_to_be32(val);
 439                 spi_imx->tx_buf += n_bytes;
 440         }
 441
 442         spi_imx->count -= n_bytes;
 443
 444         writel(val, spi_imx->base + MXC_CSPITXDATA);
 445 }
 446
 447 /* MX51 eCSPI */
 448 static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
 449                                       unsigned int fspi, unsigned int *fres)
 450 {
 451         /*
 452          * there are two 4-bit dividers, the pre-divider divides by
 453          * $pre, the post-divider by 2^$post
 454          */
 455         unsigned int pre, post;
 456         unsigned int fin = spi_imx->spi_clk;
 457
 458         fspi = min(fspi, fin);
 459
 460         post = fls(fin) - fls(fspi);
 461         if (fin > fspi << post)
 462                 post++;
 463
 464         /* now we have: (fin <= fspi << post) with post being minimal */
 465
 466         post = max(4U, post) - 4;
 467         if (unlikely(post > 0xf)) {
 468                 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
 469                                 fspi, fin);
 470                 return 0xff;
 471         }
 472
 473         pre = DIV_ROUND_UP(fin, fspi << post) - 1;
 474
 475         dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
 476                         __func__, fin, fspi, post, pre);
 477
 478         /* Resulting frequency for the SCLK line. */
 479         *fres = (fin / (pre + 1)) >> post;
 480
 481         return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
 482                 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
 483 }
 484
 485 static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
 486 {
 487         unsigned int val = 0;
 488
 489         if (enable & MXC_INT_TE)
 490                 val |= MX51_ECSPI_INT_TEEN;
 491
 492         if (enable & MXC_INT_RR)
 493                 val |= MX51_ECSPI_INT_RREN;
 494
 495         if (enable & MXC_INT_RDR)
 496                 val |= MX51_ECSPI_INT_RDREN;
 497
 498         writel(val, spi_imx->base + MX51_ECSPI_INT);
 499 }
 500
 501 static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 502 {
 503         u32 reg;
 504
 505         reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
 506         reg |= MX51_ECSPI_CTRL_XCH;
 507         writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 508 }
 509
 510 static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
 511 {
 512         u32 ctrl;
 513
 514         ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
 515         ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
 516         writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 517 }
 518
 519 static int mx51_ecspi_channel(const struct spi_device *spi)
 520 {
 521         if (!spi_get_csgpiod(spi, 0))
 522                 return spi_get_chipselect(spi, 0);
 523         return spi->controller->unused_native_cs;
 524 }
 525
 526 static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
 527                                       struct spi_message *msg)
 528 {
 529         struct spi_device *spi = msg->spi;
 530         struct spi_transfer *xfer;
 531         u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
 532         u32 min_speed_hz = ~0U;
 533         u32 testreg, delay;
 534         u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
 535         u32 current_cfg = cfg;
 536         int channel = mx51_ecspi_channel(spi);
 537
 538         /* set Host or Target mode */
 539         if (spi_imx->target_mode)
 540                 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
 541         else
 542                 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 543
 544         /*
 545          * Enable SPI_RDY handling (falling edge/level triggered).
 546          */
 547         if (spi->mode & SPI_READY)
 548                 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
 549
 550         /* set chip select to use */
 551         ctrl |= MX51_ECSPI_CTRL_CS(channel);
 552
 553         /*
 554          * The ctrl register must be written first, with the EN bit set other
 555          * registers must not be written to.
 556          */
 557         writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 558
 559         testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
 560         if (spi->mode & SPI_LOOP)
 561                 testreg |= MX51_ECSPI_TESTREG_LBC;
 562         else
 563                 testreg &= ~MX51_ECSPI_TESTREG_LBC;
 564         writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
 565
 566         /*
 567          * eCSPI burst completion by Chip Select signal in Target mode
 568          * is not functional for imx53 Soc, config SPI burst completed when
 569          * BURST_LENGTH + 1 bits are received
 570          */
 571         if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
 572                 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(channel);
 573         else
 574                 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(channel);
 575
 576         if (spi->mode & SPI_CPOL) {
 577                 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(channel);
 578                 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(channel);
 579         } else {
 580                 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(channel);
 581                 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(channel);
 582         }
 583
 584         if (spi->mode & SPI_MOSI_IDLE_LOW)
 585                 cfg |= MX51_ECSPI_CONFIG_DATACTL(channel);
 586         else
 587                 cfg &= ~MX51_ECSPI_CONFIG_DATACTL(channel);
 588
 589         if (spi->mode & SPI_CS_HIGH)
 590                 cfg |= MX51_ECSPI_CONFIG_SSBPOL(channel);
 591         else
 592                 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(channel);
 593
 594         if (cfg == current_cfg)
 595                 return 0;
 596
 597         writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
 598
 599         /*
 600          * Wait until the changes in the configuration register CONFIGREG
 601          * propagate into the hardware. It takes exactly one tick of the
 602          * SCLK clock, but we will wait two SCLK clock just to be sure. The
 603          * effect of the delay it takes for the hardware to apply changes
 604          * is noticable if the SCLK clock run very slow. In such a case, if
 605          * the polarity of SCLK should be inverted, the GPIO ChipSelect might
 606          * be asserted before the SCLK polarity changes, which would disrupt
 607          * the SPI communication as the device on the other end would consider
 608          * the change of SCLK polarity as a clock tick already.
 609          *
 610          * Because spi_imx->spi_bus_clk is only set in prepare_message
 611          * callback, iterate over all the transfers in spi_message, find the
 612          * one with lowest bus frequency, and use that bus frequency for the
 613          * delay calculation. In case all transfers have speed_hz == 0, then
 614          * min_speed_hz is ~0 and the resulting delay is zero.
 615          */
 616         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 617                 if (!xfer->speed_hz)
 618                         continue;
 619                 min_speed_hz = min(xfer->speed_hz, min_speed_hz);
 620         }
 621
 622         delay = (2 * 1000000) / min_speed_hz;
 623         if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
 624                 udelay(delay);
 625         else                    /* SCLK is _very_ slow */
 626                 usleep_range(delay, delay + 10);
 627
 628         return 0;
 629 }
 630
 631 static void mx51_configure_cpha(struct spi_imx_data *spi_imx,
 632                                 struct spi_device *spi)
 633 {
 634         bool cpha = (spi->mode & SPI_CPHA);
 635         bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only;
 636         u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
 637         int channel = mx51_ecspi_channel(spi);
 638
 639         /* Flip cpha logical value iff flip_cpha */
 640         cpha ^= flip_cpha;
 641
 642         if (cpha)
 643                 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(channel);
 644         else
 645                 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(channel);
 646
 647         writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
 648 }
 649
 650 static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 651                                        struct spi_device *spi)
 652 {
 653         u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
 654         u32 clk;
 655
 656         /* Clear BL field and set the right value */
 657         ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
 658         if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
 659                 ctrl |= (spi_imx->target_burst * 8 - 1)
 660                         << MX51_ECSPI_CTRL_BL_OFFSET;
 661         else {
 662                 if (spi_imx->usedma) {
 663                         ctrl |= (spi_imx->bits_per_word *
 664                                 spi_imx_bytes_per_word(spi_imx->bits_per_word) - 1)
 665                                 << MX51_ECSPI_CTRL_BL_OFFSET;
 666                 } else {
 667                         if (spi_imx->count >= MX51_ECSPI_CTRL_MAX_BURST)
 668                                 ctrl |= (MX51_ECSPI_CTRL_MAX_BURST - 1)
 669                                                 << MX51_ECSPI_CTRL_BL_OFFSET;
 670                         else
 671                                 ctrl |= (spi_imx->count * spi_imx->bits_per_word - 1)
 672                                                 << MX51_ECSPI_CTRL_BL_OFFSET;
 673                 }
 674         }
 675
 676         /* set clock speed */
 677         ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
 678                   0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
 679         ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 680         spi_imx->spi_bus_clk = clk;
 681
 682         mx51_configure_cpha(spi_imx, spi);
 683
 684         /*
 685          * ERR009165: work in XHC mode instead of SMC as PIO on the chips
 686          * before i.mx6ul.
 687          */
 688         if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
 689                 ctrl |= MX51_ECSPI_CTRL_SMC;
 690         else
 691                 ctrl &= ~MX51_ECSPI_CTRL_SMC;
 692
 693         writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 694
 695         return 0;
 696 }
 697
 698 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 699 {
 700         u32 tx_wml = 0;
 701
 702         if (spi_imx->devtype_data->tx_glitch_fixed)
 703                 tx_wml = spi_imx->wml;
 704         /*
 705          * Configure the DMA register: setup the watermark
 706          * and enable DMA request.
 707          */
 708         writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
 709                 MX51_ECSPI_DMA_TX_WML(tx_wml) |
 710                 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 711                 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 712                 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 713 }
 714
 715 static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
 716 {
 717         return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
 718 }
 719
 720 static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
 721 {
 722         /* drain receive buffer */
 723         while (mx51_ecspi_rx_available(spi_imx))
 724                 readl(spi_imx->base + MXC_CSPIRXDATA);
 725 }
 726
 727 #define MX31_INTREG_TEEN        (1 << 0)
 728 #define MX31_INTREG_RREN        (1 << 3)
 729
 730 #define MX31_CSPICTRL_ENABLE    (1 << 0)
 731 #define MX31_CSPICTRL_HOST      (1 << 1)
 732 #define MX31_CSPICTRL_XCH       (1 << 2)
 733 #define MX31_CSPICTRL_SMC       (1 << 3)
 734 #define MX31_CSPICTRL_POL       (1 << 4)
 735 #define MX31_CSPICTRL_PHA       (1 << 5)
 736 #define MX31_CSPICTRL_SSCTL     (1 << 6)
 737 #define MX31_CSPICTRL_SSPOL     (1 << 7)
 738 #define MX31_CSPICTRL_BC_SHIFT  8
 739 #define MX35_CSPICTRL_BL_SHIFT  20
 740 #define MX31_CSPICTRL_CS_SHIFT  24
 741 #define MX35_CSPICTRL_CS_SHIFT  12
 742 #define MX31_CSPICTRL_DR_SHIFT  16
 743
 744 #define MX31_CSPI_DMAREG        0x10
 745 #define MX31_DMAREG_RH_DEN      (1<<4)
 746 #define MX31_DMAREG_TH_DEN      (1<<1)
 747
 748 #define MX31_CSPISTATUS         0x14
 749 #define MX31_STATUS_RR          (1 << 3)
 750
 751 #define MX31_CSPI_TESTREG       0x1C
 752 #define MX31_TEST_LBC           (1 << 14)
 753
 754 /* These functions also work for the i.MX35, but be aware that
 755  * the i.MX35 has a slightly different register layout for bits
 756  * we do not use here.
 757  */
 758 static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
 759 {
 760         unsigned int val = 0;
 761
 762         if (enable & MXC_INT_TE)
 763                 val |= MX31_INTREG_TEEN;
 764         if (enable & MXC_INT_RR)
 765                 val |= MX31_INTREG_RREN;
 766
 767         writel(val, spi_imx->base + MXC_CSPIINT);
 768 }
 769
 770 static void mx31_trigger(struct spi_imx_data *spi_imx)
 771 {
 772         unsigned int reg;
 773
 774         reg = readl(spi_imx->base + MXC_CSPICTRL);
 775         reg |= MX31_CSPICTRL_XCH;
 776         writel(reg, spi_imx->base + MXC_CSPICTRL);
 777 }
 778
 779 static int mx31_prepare_message(struct spi_imx_data *spi_imx,
 780                                 struct spi_message *msg)
 781 {
 782         return 0;
 783 }
 784
 785 static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
 786                                  struct spi_device *spi)
 787 {
 788         unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_HOST;
 789         unsigned int clk;
 790
 791         reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
 792                 MX31_CSPICTRL_DR_SHIFT;
 793         spi_imx->spi_bus_clk = clk;
 794
 795         if (is_imx35_cspi(spi_imx)) {
 796                 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
 797                 reg |= MX31_CSPICTRL_SSCTL;
 798         } else {
 799                 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
 800         }
 801
 802         if (spi->mode & SPI_CPHA)
 803                 reg |= MX31_CSPICTRL_PHA;
 804         if (spi->mode & SPI_CPOL)
 805                 reg |= MX31_CSPICTRL_POL;
 806         if (spi->mode & SPI_CS_HIGH)
 807                 reg |= MX31_CSPICTRL_SSPOL;
 808         if (!spi_get_csgpiod(spi, 0))
 809                 reg |= (spi_get_chipselect(spi, 0)) <<
 810                         (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
 811                                                   MX31_CSPICTRL_CS_SHIFT);
 812
 813         if (spi_imx->usedma)
 814                 reg |= MX31_CSPICTRL_SMC;
 815
 816         writel(reg, spi_imx->base + MXC_CSPICTRL);
 817
 818         reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
 819         if (spi->mode & SPI_LOOP)
 820                 reg |= MX31_TEST_LBC;
 821         else
 822                 reg &= ~MX31_TEST_LBC;
 823         writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
 824
 825         if (spi_imx->usedma) {
 826                 /*
 827                  * configure DMA requests when RXFIFO is half full and
 828                  * when TXFIFO is half empty
 829                  */
 830                 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
 831                         spi_imx->base + MX31_CSPI_DMAREG);
 832         }
 833
 834         return 0;
 835 }
 836
 837 static int mx31_rx_available(struct spi_imx_data *spi_imx)
 838 {
 839         return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
 840 }
 841
 842 static void mx31_reset(struct spi_imx_data *spi_imx)
 843 {
 844         /* drain receive buffer */
 845         while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
 846                 readl(spi_imx->base + MXC_CSPIRXDATA);
 847 }
 848
 849 #define MX21_INTREG_RR          (1 << 4)
 850 #define MX21_INTREG_TEEN        (1 << 9)
 851 #define MX21_INTREG_RREN        (1 << 13)
 852
 853 #define MX21_CSPICTRL_POL       (1 << 5)
 854 #define MX21_CSPICTRL_PHA       (1 << 6)
 855 #define MX21_CSPICTRL_SSPOL     (1 << 8)
 856 #define MX21_CSPICTRL_XCH       (1 << 9)
 857 #define MX21_CSPICTRL_ENABLE    (1 << 10)
 858 #define MX21_CSPICTRL_HOST      (1 << 11)
 859 #define MX21_CSPICTRL_DR_SHIFT  14
 860 #define MX21_CSPICTRL_CS_SHIFT  19
 861
 862 static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
 863 {
 864         unsigned int val = 0;
 865
 866         if (enable & MXC_INT_TE)
 867                 val |= MX21_INTREG_TEEN;
 868         if (enable & MXC_INT_RR)
 869                 val |= MX21_INTREG_RREN;
 870
 871         writel(val, spi_imx->base + MXC_CSPIINT);
 872 }
 873
 874 static void mx21_trigger(struct spi_imx_data *spi_imx)
 875 {
 876         unsigned int reg;
 877
 878         reg = readl(spi_imx->base + MXC_CSPICTRL);
 879         reg |= MX21_CSPICTRL_XCH;
 880         writel(reg, spi_imx->base + MXC_CSPICTRL);
 881 }
 882
 883 static int mx21_prepare_message(struct spi_imx_data *spi_imx,
 884                                 struct spi_message *msg)
 885 {
 886         return 0;
 887 }
 888
 889 static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
 890                                  struct spi_device *spi)
 891 {
 892         unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_HOST;
 893         unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
 894         unsigned int clk;
 895
 896         reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
 897                 << MX21_CSPICTRL_DR_SHIFT;
 898         spi_imx->spi_bus_clk = clk;
 899
 900         reg |= spi_imx->bits_per_word - 1;
 901
 902         if (spi->mode & SPI_CPHA)
 903                 reg |= MX21_CSPICTRL_PHA;
 904         if (spi->mode & SPI_CPOL)
 905                 reg |= MX21_CSPICTRL_POL;
 906         if (spi->mode & SPI_CS_HIGH)
 907                 reg |= MX21_CSPICTRL_SSPOL;
 908         if (!spi_get_csgpiod(spi, 0))
 909                 reg |= spi_get_chipselect(spi, 0) << MX21_CSPICTRL_CS_SHIFT;
 910
 911         writel(reg, spi_imx->base + MXC_CSPICTRL);
 912
 913         return 0;
 914 }
 915
 916 static int mx21_rx_available(struct spi_imx_data *spi_imx)
 917 {
 918         return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
 919 }
 920
 921 static void mx21_reset(struct spi_imx_data *spi_imx)
 922 {
 923         writel(1, spi_imx->base + MXC_RESET);
 924 }
 925
 926 #define MX1_INTREG_RR           (1 << 3)
 927 #define MX1_INTREG_TEEN         (1 << 8)
 928 #define MX1_INTREG_RREN         (1 << 11)
 929
 930 #define MX1_CSPICTRL_POL        (1 << 4)
 931 #define MX1_CSPICTRL_PHA        (1 << 5)
 932 #define MX1_CSPICTRL_XCH        (1 << 8)
 933 #define MX1_CSPICTRL_ENABLE     (1 << 9)
 934 #define MX1_CSPICTRL_HOST       (1 << 10)
 935 #define MX1_CSPICTRL_DR_SHIFT   13
 936
 937 static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
 938 {
 939         unsigned int val = 0;
 940
 941         if (enable & MXC_INT_TE)
 942                 val |= MX1_INTREG_TEEN;
 943         if (enable & MXC_INT_RR)
 944                 val |= MX1_INTREG_RREN;
 945
 946         writel(val, spi_imx->base + MXC_CSPIINT);
 947 }
 948
 949 static void mx1_trigger(struct spi_imx_data *spi_imx)
 950 {
 951         unsigned int reg;
 952
 953         reg = readl(spi_imx->base + MXC_CSPICTRL);
 954         reg |= MX1_CSPICTRL_XCH;
 955         writel(reg, spi_imx->base + MXC_CSPICTRL);
 956 }
 957
 958 static int mx1_prepare_message(struct spi_imx_data *spi_imx,
 959                                struct spi_message *msg)
 960 {
 961         return 0;
 962 }
 963
 964 static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
 965                                 struct spi_device *spi)
 966 {
 967         unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_HOST;
 968         unsigned int clk;
 969
 970         reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
 971                 MX1_CSPICTRL_DR_SHIFT;
 972         spi_imx->spi_bus_clk = clk;
 973
 974         reg |= spi_imx->bits_per_word - 1;
 975
 976         if (spi->mode & SPI_CPHA)
 977                 reg |= MX1_CSPICTRL_PHA;
 978         if (spi->mode & SPI_CPOL)
 979                 reg |= MX1_CSPICTRL_POL;
 980
 981         writel(reg, spi_imx->base + MXC_CSPICTRL);
 982
 983         return 0;
 984 }
 985
 986 static int mx1_rx_available(struct spi_imx_data *spi_imx)
 987 {
 988         return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
 989 }
 990
 991 static void mx1_reset(struct spi_imx_data *spi_imx)
 992 {
 993         writel(1, spi_imx->base + MXC_RESET);
 994 }
 995
 996 static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
 997         .intctrl = mx1_intctrl,
 998         .prepare_message = mx1_prepare_message,
 999         .prepare_transfer = mx1_prepare_transfer,
1000         .trigger = mx1_trigger,
1001         .rx_available = mx1_rx_available,
1002         .reset = mx1_reset,
1003         .fifo_size = 8,
1004         .has_dmamode = false,
1005         .dynamic_burst = false,
1006         .has_targetmode = false,
1007         .devtype = IMX1_CSPI,
1008 };
1009
1010 static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
1011         .intctrl = mx21_intctrl,
1012         .prepare_message = mx21_prepare_message,
1013         .prepare_transfer = mx21_prepare_transfer,
1014         .trigger = mx21_trigger,
1015         .rx_available = mx21_rx_available,
1016         .reset = mx21_reset,
1017         .fifo_size = 8,
1018         .has_dmamode = false,
1019         .dynamic_burst = false,
1020         .has_targetmode = false,
1021         .devtype = IMX21_CSPI,
1022 };
1023
1024 static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
1025         /* i.mx27 cspi shares the functions with i.mx21 one */
1026         .intctrl = mx21_intctrl,
1027         .prepare_message = mx21_prepare_message,
1028         .prepare_transfer = mx21_prepare_transfer,
1029         .trigger = mx21_trigger,
1030         .rx_available = mx21_rx_available,
1031         .reset = mx21_reset,
1032         .fifo_size = 8,
1033         .has_dmamode = false,
1034         .dynamic_burst = false,
1035         .has_targetmode = false,
1036         .devtype = IMX27_CSPI,
1037 };
1038
1039 static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
1040         .intctrl = mx31_intctrl,
1041         .prepare_message = mx31_prepare_message,
1042         .prepare_transfer = mx31_prepare_transfer,
1043         .trigger = mx31_trigger,
1044         .rx_available = mx31_rx_available,
1045         .reset = mx31_reset,
1046         .fifo_size = 8,
1047         .has_dmamode = false,
1048         .dynamic_burst = false,
1049         .has_targetmode = false,
1050         .devtype = IMX31_CSPI,
1051 };
1052
1053 static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
1054         /* i.mx35 and later cspi shares the functions with i.mx31 one */
1055         .intctrl = mx31_intctrl,
1056         .prepare_message = mx31_prepare_message,
1057         .prepare_transfer = mx31_prepare_transfer,
1058         .trigger = mx31_trigger,
1059         .rx_available = mx31_rx_available,
1060         .reset = mx31_reset,
1061         .fifo_size = 8,
1062         .has_dmamode = true,
1063         .dynamic_burst = false,
1064         .has_targetmode = false,
1065         .devtype = IMX35_CSPI,
1066 };
1067
1068 static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
1069         .intctrl = mx51_ecspi_intctrl,
1070         .prepare_message = mx51_ecspi_prepare_message,
1071         .prepare_transfer = mx51_ecspi_prepare_transfer,
1072         .trigger = mx51_ecspi_trigger,
1073         .rx_available = mx51_ecspi_rx_available,
1074         .reset = mx51_ecspi_reset,
1075         .setup_wml = mx51_setup_wml,
1076         .fifo_size = 64,
1077         .has_dmamode = true,
1078         .dynamic_burst = true,
1079         .has_targetmode = true,
1080         .disable = mx51_ecspi_disable,
1081         .devtype = IMX51_ECSPI,
1082 };
1083
1084 static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1085         .intctrl = mx51_ecspi_intctrl,
1086         .prepare_message = mx51_ecspi_prepare_message,
1087         .prepare_transfer = mx51_ecspi_prepare_transfer,
1088         .trigger = mx51_ecspi_trigger,
1089         .rx_available = mx51_ecspi_rx_available,
1090         .reset = mx51_ecspi_reset,
1091         .fifo_size = 64,
1092         .has_dmamode = true,
1093         .has_targetmode = true,
1094         .disable = mx51_ecspi_disable,
1095         .devtype = IMX53_ECSPI,
1096 };
1097
1098 static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
1099         .intctrl = mx51_ecspi_intctrl,
1100         .prepare_message = mx51_ecspi_prepare_message,
1101         .prepare_transfer = mx51_ecspi_prepare_transfer,
1102         .trigger = mx51_ecspi_trigger,
1103         .rx_available = mx51_ecspi_rx_available,
1104         .reset = mx51_ecspi_reset,
1105         .setup_wml = mx51_setup_wml,
1106         .fifo_size = 64,
1107         .has_dmamode = true,
1108         .dynamic_burst = true,
1109         .has_targetmode = true,
1110         .tx_glitch_fixed = true,
1111         .disable = mx51_ecspi_disable,
1112         .devtype = IMX51_ECSPI,
1113 };
1114
1115 static const struct of_device_id spi_imx_dt_ids[] = {
1116         { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1117         { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1118         { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1119         { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1120         { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1121         { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1122         { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1123         { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
1124         { /* sentinel */ }
1125 };
1126 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1127
1128 static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1129 {
1130         u32 ctrl;
1131
1132         ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1133         ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1134         ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1135         writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1136 }
1137
1138 static void spi_imx_push(struct spi_imx_data *spi_imx)
1139 {
1140         unsigned int burst_len;
1141
1142         /*
1143          * Reload the FIFO when the remaining bytes to be transferred in the
1144          * current burst is 0. This only applies when bits_per_word is a
1145          * multiple of 8.
1146          */
1147         if (!spi_imx->remainder) {
1148                 if (spi_imx->dynamic_burst) {
1149
1150                         /* We need to deal unaligned data first */
1151                         burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1152
1153                         if (!burst_len)
1154                                 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1155
1156                         spi_imx_set_burst_len(spi_imx, burst_len * 8);
1157
1158                         spi_imx->remainder = burst_len;
1159                 } else {
1160                         spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1161                 }
1162         }
1163
1164         while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1165                 if (!spi_imx->count)
1166                         break;
1167                 if (spi_imx->dynamic_burst &&
1168                     spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
1169                         break;
1170                 spi_imx->tx(spi_imx);
1171                 spi_imx->txfifo++;
1172         }
1173
1174         if (!spi_imx->target_mode)
1175                 spi_imx->devtype_data->trigger(spi_imx);
1176 }
1177
1178 static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1179 {
1180         struct spi_imx_data *spi_imx = dev_id;
1181
1182         while (spi_imx->txfifo &&
1183                spi_imx->devtype_data->rx_available(spi_imx)) {
1184                 spi_imx->rx(spi_imx);
1185                 spi_imx->txfifo--;
1186         }
1187
1188         if (spi_imx->count) {
1189                 spi_imx_push(spi_imx);
1190                 return IRQ_HANDLED;
1191         }
1192
1193         if (spi_imx->txfifo) {
1194                 /* No data left to push, but still waiting for rx data,
1195                  * enable receive data available interrupt.
1196                  */
1197                 spi_imx->devtype_data->intctrl(
1198                                 spi_imx, MXC_INT_RR);
1199                 return IRQ_HANDLED;
1200         }
1201
1202         spi_imx->devtype_data->intctrl(spi_imx, 0);
1203         complete(&spi_imx->xfer_done);
1204
1205         return IRQ_HANDLED;
1206 }
1207
1208 static int spi_imx_dma_configure(struct spi_controller *controller)
1209 {
1210         int ret;
1211         enum dma_slave_buswidth buswidth;
1212         struct dma_slave_config rx = {}, tx = {};
1213         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1214
1215         switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1216         case 4:
1217                 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1218                 break;
1219         case 2:
1220                 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1221                 break;
1222         case 1:
1223                 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1224                 break;
1225         default:
1226                 return -EINVAL;
1227         }
1228
1229         tx.direction = DMA_MEM_TO_DEV;
1230         tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1231         tx.dst_addr_width = buswidth;
1232         tx.dst_maxburst = spi_imx->wml;
1233         ret = dmaengine_slave_config(controller->dma_tx, &tx);
1234         if (ret) {
1235                 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1236                 return ret;
1237         }
1238
1239         rx.direction = DMA_DEV_TO_MEM;
1240         rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1241         rx.src_addr_width = buswidth;
1242         rx.src_maxburst = spi_imx->wml;
1243         ret = dmaengine_slave_config(controller->dma_rx, &rx);
1244         if (ret) {
1245                 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1246                 return ret;
1247         }
1248
1249         return 0;
1250 }
1251
1252 static int spi_imx_setupxfer(struct spi_device *spi,
1253                                  struct spi_transfer *t)
1254 {
1255         struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1256
1257         if (!t)
1258                 return 0;
1259
1260         if (!t->speed_hz) {
1261                 if (!spi->max_speed_hz) {
1262                         dev_err(&spi->dev, "no speed_hz provided!\n");
1263                         return -EINVAL;
1264                 }
1265                 dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
1266                 spi_imx->spi_bus_clk = spi->max_speed_hz;
1267         } else
1268                 spi_imx->spi_bus_clk = t->speed_hz;
1269
1270         spi_imx->bits_per_word = t->bits_per_word;
1271         spi_imx->count = t->len;
1272
1273         /*
1274          * Initialize the functions for transfer. To transfer non byte-aligned
1275          * words, we have to use multiple word-size bursts, we can't use
1276          * dynamic_burst in that case.
1277          */
1278         if (spi_imx->devtype_data->dynamic_burst && !spi_imx->target_mode &&
1279             !(spi->mode & SPI_CS_WORD) &&
1280             (spi_imx->bits_per_word == 8 ||
1281             spi_imx->bits_per_word == 16 ||
1282             spi_imx->bits_per_word == 32)) {
1283
1284                 spi_imx->rx = spi_imx_buf_rx_swap;
1285                 spi_imx->tx = spi_imx_buf_tx_swap;
1286                 spi_imx->dynamic_burst = 1;
1287
1288         } else {
1289                 if (spi_imx->bits_per_word <= 8) {
1290                         spi_imx->rx = spi_imx_buf_rx_u8;
1291                         spi_imx->tx = spi_imx_buf_tx_u8;
1292                 } else if (spi_imx->bits_per_word <= 16) {
1293                         spi_imx->rx = spi_imx_buf_rx_u16;
1294                         spi_imx->tx = spi_imx_buf_tx_u16;
1295                 } else {
1296                         spi_imx->rx = spi_imx_buf_rx_u32;
1297                         spi_imx->tx = spi_imx_buf_tx_u32;
1298                 }
1299                 spi_imx->dynamic_burst = 0;
1300         }
1301
1302         if (spi_imx_can_dma(spi_imx->controller, spi, t))
1303                 spi_imx->usedma = true;
1304         else
1305                 spi_imx->usedma = false;
1306
1307         spi_imx->rx_only = ((t->tx_buf == NULL)
1308                         || (t->tx_buf == spi->controller->dummy_tx));
1309
1310         if (is_imx53_ecspi(spi_imx) && spi_imx->target_mode) {
1311                 spi_imx->rx = mx53_ecspi_rx_target;
1312                 spi_imx->tx = mx53_ecspi_tx_target;
1313                 spi_imx->target_burst = t->len;
1314         }
1315
1316         spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
1317
1318         return 0;
1319 }
1320
1321 static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1322 {
1323         struct spi_controller *controller = spi_imx->controller;
1324
1325         if (controller->dma_rx) {
1326                 dma_release_channel(controller->dma_rx);
1327                 controller->dma_rx = NULL;
1328         }
1329
1330         if (controller->dma_tx) {
1331                 dma_release_channel(controller->dma_tx);
1332                 controller->dma_tx = NULL;
1333         }
1334 }
1335
1336 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1337                              struct spi_controller *controller)
1338 {
1339         int ret;
1340
1341         spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1342
1343         /* Prepare for TX DMA: */
1344         controller->dma_tx = dma_request_chan(dev, "tx");
1345         if (IS_ERR(controller->dma_tx)) {
1346                 ret = PTR_ERR(controller->dma_tx);
1347                 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1348                 controller->dma_tx = NULL;
1349                 goto err;
1350         }
1351
1352         /* Prepare for RX : */
1353         controller->dma_rx = dma_request_chan(dev, "rx");
1354         if (IS_ERR(controller->dma_rx)) {
1355                 ret = PTR_ERR(controller->dma_rx);
1356                 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1357                 controller->dma_rx = NULL;
1358                 goto err;
1359         }
1360
1361         init_completion(&spi_imx->dma_rx_completion);
1362         init_completion(&spi_imx->dma_tx_completion);
1363         controller->can_dma = spi_imx_can_dma;
1364         controller->max_dma_len = MAX_SDMA_BD_BYTES;
1365         spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX |
1366                                          SPI_CONTROLLER_MUST_TX;
1367
1368         return 0;
1369 err:
1370         spi_imx_sdma_exit(spi_imx);
1371         return ret;
1372 }
1373
1374 static void spi_imx_dma_rx_callback(void *cookie)
1375 {
1376         struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1377
1378         complete(&spi_imx->dma_rx_completion);
1379 }
1380
1381 static void spi_imx_dma_tx_callback(void *cookie)
1382 {
1383         struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1384
1385         complete(&spi_imx->dma_tx_completion);
1386 }
1387
1388 static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1389 {
1390         unsigned long timeout = 0;
1391
1392         /* Time with actual data transfer and CS change delay related to HW */
1393         timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1394
1395         /* Add extra second for scheduler related activities */
1396         timeout += 1;
1397
1398         /* Double calculated timeout */
1399         return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1400 }
1401
1402 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1403                                 struct spi_transfer *transfer)
1404 {
1405         struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1406         unsigned long transfer_timeout;
1407         unsigned long timeout;
1408         struct spi_controller *controller = spi_imx->controller;
1409         struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1410         struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1411         unsigned int bytes_per_word, i;
1412         int ret;
1413
1414         /* Get the right burst length from the last sg to ensure no tail data */
1415         bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1416         for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1417                 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1418                         break;
1419         }
1420         /* Use 1 as wml in case no available burst length got */
1421         if (i == 0)
1422                 i = 1;
1423
1424         spi_imx->wml =  i;
1425
1426         ret = spi_imx_dma_configure(controller);
1427         if (ret)
1428                 goto dma_failure_no_start;
1429
1430         if (!spi_imx->devtype_data->setup_wml) {
1431                 dev_err(spi_imx->dev, "No setup_wml()?\n");
1432                 ret = -EINVAL;
1433                 goto dma_failure_no_start;
1434         }
1435         spi_imx->devtype_data->setup_wml(spi_imx);
1436
1437         /*
1438          * The TX DMA setup starts the transfer, so make sure RX is configured
1439          * before TX.
1440          */
1441         desc_rx = dmaengine_prep_slave_sg(controller->dma_rx,
1442                                 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1443                                 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1444         if (!desc_rx) {
1445                 ret = -EINVAL;
1446                 goto dma_failure_no_start;
1447         }
1448
1449         desc_rx->callback = spi_imx_dma_rx_callback;
1450         desc_rx->callback_param = (void *)spi_imx;
1451         dmaengine_submit(desc_rx);
1452         reinit_completion(&spi_imx->dma_rx_completion);
1453         dma_async_issue_pending(controller->dma_rx);
1454
1455         desc_tx = dmaengine_prep_slave_sg(controller->dma_tx,
1456                                 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1457                                 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1458         if (!desc_tx) {
1459                 dmaengine_terminate_all(controller->dma_tx);
1460                 dmaengine_terminate_all(controller->dma_rx);
1461                 return -EINVAL;
1462         }
1463
1464         desc_tx->callback = spi_imx_dma_tx_callback;
1465         desc_tx->callback_param = (void *)spi_imx;
1466         dmaengine_submit(desc_tx);
1467         reinit_completion(&spi_imx->dma_tx_completion);
1468         dma_async_issue_pending(controller->dma_tx);
1469
1470         transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1471
1472         /* Wait SDMA to finish the data transfer.*/
1473         timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1474                                                 transfer_timeout);
1475         if (!timeout) {
1476                 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1477                 dmaengine_terminate_all(controller->dma_tx);
1478                 dmaengine_terminate_all(controller->dma_rx);
1479                 return -ETIMEDOUT;
1480         }
1481
1482         timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1483                                               transfer_timeout);
1484         if (!timeout) {
1485                 dev_err(&controller->dev, "I/O Error in DMA RX\n");
1486                 spi_imx->devtype_data->reset(spi_imx);
1487                 dmaengine_terminate_all(controller->dma_rx);
1488                 return -ETIMEDOUT;
1489         }
1490
1491         return 0;
1492 /* fallback to pio */
1493 dma_failure_no_start:
1494         transfer->error |= SPI_TRANS_FAIL_NO_START;
1495         return ret;
1496 }
1497
1498 static int spi_imx_pio_transfer(struct spi_device *spi,
1499                                 struct spi_transfer *transfer)
1500 {
1501         struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1502         unsigned long transfer_timeout;
1503         unsigned long timeout;
1504
1505         spi_imx->tx_buf = transfer->tx_buf;
1506         spi_imx->rx_buf = transfer->rx_buf;
1507         spi_imx->count = transfer->len;
1508         spi_imx->txfifo = 0;
1509         spi_imx->remainder = 0;
1510
1511         reinit_completion(&spi_imx->xfer_done);
1512
1513         spi_imx_push(spi_imx);
1514
1515         spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1516
1517         transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1518
1519         timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1520                                               transfer_timeout);
1521         if (!timeout) {
1522                 dev_err(&spi->dev, "I/O Error in PIO\n");
1523                 spi_imx->devtype_data->reset(spi_imx);
1524                 return -ETIMEDOUT;
1525         }
1526
1527         return 0;
1528 }
1529
1530 static int spi_imx_poll_transfer(struct spi_device *spi,
1531                                  struct spi_transfer *transfer)
1532 {
1533         struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1534         unsigned long timeout;
1535
1536         spi_imx->tx_buf = transfer->tx_buf;
1537         spi_imx->rx_buf = transfer->rx_buf;
1538         spi_imx->count = transfer->len;
1539         spi_imx->txfifo = 0;
1540         spi_imx->remainder = 0;
1541
1542         /* fill in the fifo before timeout calculations if we are
1543          * interrupted here, then the data is getting transferred by
1544          * the HW while we are interrupted
1545          */
1546         spi_imx_push(spi_imx);
1547
1548         timeout = spi_imx_calculate_timeout(spi_imx, transfer->len) + jiffies;
1549         while (spi_imx->txfifo) {
1550                 /* RX */
1551                 while (spi_imx->txfifo &&
1552                        spi_imx->devtype_data->rx_available(spi_imx)) {
1553                         spi_imx->rx(spi_imx);
1554                         spi_imx->txfifo--;
1555                 }
1556
1557                 /* TX */
1558                 if (spi_imx->count) {
1559                         spi_imx_push(spi_imx);
1560                         continue;
1561                 }
1562
1563                 if (spi_imx->txfifo &&
1564                     time_after(jiffies, timeout)) {
1565
1566                         dev_err_ratelimited(&spi->dev,
1567                                             "timeout period reached: jiffies: %lu- falling back to interrupt mode\n",
1568                                             jiffies - timeout);
1569
1570                         /* fall back to interrupt mode */
1571                         return spi_imx_pio_transfer(spi, transfer);
1572                 }
1573         }
1574
1575         return 0;
1576 }
1577
1578 static int spi_imx_pio_transfer_target(struct spi_device *spi,
1579                                        struct spi_transfer *transfer)
1580 {
1581         struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1582         int ret = 0;
1583
1584         if (is_imx53_ecspi(spi_imx) &&
1585             transfer->len > MX53_MAX_TRANSFER_BYTES) {
1586                 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1587                         MX53_MAX_TRANSFER_BYTES);
1588                 return -EMSGSIZE;
1589         }
1590
1591         spi_imx->tx_buf = transfer->tx_buf;
1592         spi_imx->rx_buf = transfer->rx_buf;
1593         spi_imx->count = transfer->len;
1594         spi_imx->txfifo = 0;
1595         spi_imx->remainder = 0;
1596
1597         reinit_completion(&spi_imx->xfer_done);
1598         spi_imx->target_aborted = false;
1599
1600         spi_imx_push(spi_imx);
1601
1602         spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1603
1604         if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1605             spi_imx->target_aborted) {
1606                 dev_dbg(&spi->dev, "interrupted\n");
1607                 ret = -EINTR;
1608         }
1609
1610         /* ecspi has a HW issue when works in Target mode,
1611          * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1612          * ECSPI_TXDATA keeps shift out the last word data,
1613          * so we have to disable ECSPI when in target mode after the
1614          * transfer completes
1615          */
1616         if (spi_imx->devtype_data->disable)
1617                 spi_imx->devtype_data->disable(spi_imx);
1618
1619         return ret;
1620 }
1621
1622 static int spi_imx_transfer_one(struct spi_controller *controller,
1623                                 struct spi_device *spi,
1624                                 struct spi_transfer *transfer)
1625 {
1626         struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1627         unsigned long hz_per_byte, byte_limit;
1628
1629         spi_imx_setupxfer(spi, transfer);
1630         transfer->effective_speed_hz = spi_imx->spi_bus_clk;
1631
1632         /* flush rxfifo before transfer */
1633         while (spi_imx->devtype_data->rx_available(spi_imx))
1634                 readl(spi_imx->base + MXC_CSPIRXDATA);
1635
1636         if (spi_imx->target_mode)
1637                 return spi_imx_pio_transfer_target(spi, transfer);
1638
1639         /*
1640          * If we decided in spi_imx_can_dma() that we want to do a DMA
1641          * transfer, the SPI transfer has already been mapped, so we
1642          * have to do the DMA transfer here.
1643          */
1644         if (spi_imx->usedma)
1645                 return spi_imx_dma_transfer(spi_imx, transfer);
1646         /*
1647          * Calculate the estimated time in us the transfer runs. Find
1648          * the number of Hz per byte per polling limit.
1649          */
1650         hz_per_byte = polling_limit_us ? ((8 + 4) * USEC_PER_SEC) / polling_limit_us : 0;
1651         byte_limit = hz_per_byte ? transfer->effective_speed_hz / hz_per_byte : 1;
1652
1653         /* run in polling mode for short transfers */
1654         if (transfer->len < byte_limit)
1655                 return spi_imx_poll_transfer(spi, transfer);
1656
1657         return spi_imx_pio_transfer(spi, transfer);
1658 }
1659
1660 static int spi_imx_setup(struct spi_device *spi)
1661 {
1662         dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1663                  spi->mode, spi->bits_per_word, spi->max_speed_hz);
1664
1665         return 0;
1666 }
1667
1668 static void spi_imx_cleanup(struct spi_device *spi)
1669 {
1670 }
1671
1672 static int
1673 spi_imx_prepare_message(struct spi_controller *controller, struct spi_message *msg)
1674 {
1675         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1676         int ret;
1677
1678         ret = pm_runtime_resume_and_get(spi_imx->dev);
1679         if (ret < 0) {
1680                 dev_err(spi_imx->dev, "failed to enable clock\n");
1681                 return ret;
1682         }
1683
1684         ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1685         if (ret) {
1686                 pm_runtime_mark_last_busy(spi_imx->dev);
1687                 pm_runtime_put_autosuspend(spi_imx->dev);
1688         }
1689
1690         return ret;
1691 }
1692
1693 static int
1694 spi_imx_unprepare_message(struct spi_controller *controller, struct spi_message *msg)
1695 {
1696         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1697
1698         pm_runtime_mark_last_busy(spi_imx->dev);
1699         pm_runtime_put_autosuspend(spi_imx->dev);
1700         return 0;
1701 }
1702
1703 static int spi_imx_target_abort(struct spi_controller *controller)
1704 {
1705         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1706
1707         spi_imx->target_aborted = true;
1708         complete(&spi_imx->xfer_done);
1709
1710         return 0;
1711 }
1712
1713 static int spi_imx_probe(struct platform_device *pdev)
1714 {
1715         struct device_node *np = pdev->dev.of_node;
1716         struct spi_controller *controller;
1717         struct spi_imx_data *spi_imx;
1718         struct resource *res;
1719         int ret, irq, spi_drctl;
1720         const struct spi_imx_devtype_data *devtype_data =
1721                         of_device_get_match_data(&pdev->dev);
1722         bool target_mode;
1723         u32 val;
1724
1725         target_mode = devtype_data->has_targetmode &&
1726                       of_property_read_bool(np, "spi-slave");
1727         if (target_mode)
1728                 controller = spi_alloc_target(&pdev->dev,
1729                                               sizeof(struct spi_imx_data));
1730         else
1731                 controller = spi_alloc_host(&pdev->dev,
1732                                             sizeof(struct spi_imx_data));
1733         if (!controller)
1734                 return -ENOMEM;
1735
1736         ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1737         if ((ret < 0) || (spi_drctl >= 0x3)) {
1738                 /* '11' is reserved */
1739                 spi_drctl = 0;
1740         }
1741
1742         platform_set_drvdata(pdev, controller);
1743
1744         controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1745         controller->bus_num = np ? -1 : pdev->id;
1746         controller->use_gpio_descriptors = true;
1747
1748         spi_imx = spi_controller_get_devdata(controller);
1749         spi_imx->controller = controller;
1750         spi_imx->dev = &pdev->dev;
1751         spi_imx->target_mode = target_mode;
1752
1753         spi_imx->devtype_data = devtype_data;
1754
1755         /*
1756          * Get number of chip selects from device properties. This can be
1757          * coming from device tree or boardfiles, if it is not defined,
1758          * a default value of 3 chip selects will be used, as all the legacy
1759          * board files have <= 3 chip selects.
1760          */
1761         if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1762                 controller->num_chipselect = val;
1763         else
1764                 controller->num_chipselect = 3;
1765
1766         controller->transfer_one = spi_imx_transfer_one;
1767         controller->setup = spi_imx_setup;
1768         controller->cleanup = spi_imx_cleanup;
1769         controller->prepare_message = spi_imx_prepare_message;
1770         controller->unprepare_message = spi_imx_unprepare_message;
1771         controller->target_abort = spi_imx_target_abort;
1772         controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS |
1773                                 SPI_MOSI_IDLE_LOW;
1774
1775         if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1776             is_imx53_ecspi(spi_imx))
1777                 controller->mode_bits |= SPI_LOOP | SPI_READY;
1778
1779         if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx))
1780                 controller->mode_bits |= SPI_RX_CPHA_FLIP;
1781
1782         if (is_imx51_ecspi(spi_imx) &&
1783             device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
1784                 /*
1785                  * When using HW-CS implementing SPI_CS_WORD can be done by just
1786                  * setting the burst length to the word size. This is
1787                  * considerably faster than manually controlling the CS.
1788                  */
1789                 controller->mode_bits |= SPI_CS_WORD;
1790
1791         if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) {
1792                 controller->max_native_cs = 4;
1793                 controller->flags |= SPI_CONTROLLER_GPIO_SS;
1794         }
1795
1796         spi_imx->spi_drctl = spi_drctl;
1797
1798         init_completion(&spi_imx->xfer_done);
1799
1800         spi_imx->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
1801         if (IS_ERR(spi_imx->base)) {
1802                 ret = PTR_ERR(spi_imx->base);
1803                 goto out_controller_put;
1804         }
1805         spi_imx->base_phys = res->start;
1806
1807         irq = platform_get_irq(pdev, 0);
1808         if (irq < 0) {
1809                 ret = irq;
1810                 goto out_controller_put;
1811         }
1812
1813         ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1814                                dev_name(&pdev->dev), spi_imx);
1815         if (ret) {
1816                 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1817                 goto out_controller_put;
1818         }
1819
1820         spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1821         if (IS_ERR(spi_imx->clk_ipg)) {
1822                 ret = PTR_ERR(spi_imx->clk_ipg);
1823                 goto out_controller_put;
1824         }
1825
1826         spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1827         if (IS_ERR(spi_imx->clk_per)) {
1828                 ret = PTR_ERR(spi_imx->clk_per);
1829                 goto out_controller_put;
1830         }
1831
1832         ret = clk_prepare_enable(spi_imx->clk_per);
1833         if (ret)
1834                 goto out_controller_put;
1835
1836         ret = clk_prepare_enable(spi_imx->clk_ipg);
1837         if (ret)
1838                 goto out_put_per;
1839
1840         pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1841         pm_runtime_use_autosuspend(spi_imx->dev);
1842         pm_runtime_get_noresume(spi_imx->dev);
1843         pm_runtime_set_active(spi_imx->dev);
1844         pm_runtime_enable(spi_imx->dev);
1845
1846         spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1847         /*
1848          * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1849          * if validated on other chips.
1850          */
1851         if (spi_imx->devtype_data->has_dmamode) {
1852                 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, controller);
1853                 if (ret == -EPROBE_DEFER)
1854                         goto out_runtime_pm_put;
1855
1856                 if (ret < 0)
1857                         dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
1858                                 ret);
1859         }
1860
1861         spi_imx->devtype_data->reset(spi_imx);
1862
1863         spi_imx->devtype_data->intctrl(spi_imx, 0);
1864
1865         controller->dev.of_node = pdev->dev.of_node;
1866         ret = spi_register_controller(controller);
1867         if (ret) {
1868                 dev_err_probe(&pdev->dev, ret, "register controller failed\n");
1869                 goto out_register_controller;
1870         }
1871
1872         pm_runtime_mark_last_busy(spi_imx->dev);
1873         pm_runtime_put_autosuspend(spi_imx->dev);
1874
1875         return ret;
1876
1877 out_register_controller:
1878         if (spi_imx->devtype_data->has_dmamode)
1879                 spi_imx_sdma_exit(spi_imx);
1880 out_runtime_pm_put:
1881         pm_runtime_dont_use_autosuspend(spi_imx->dev);
1882         pm_runtime_set_suspended(&pdev->dev);
1883         pm_runtime_disable(spi_imx->dev);
1884
1885         clk_disable_unprepare(spi_imx->clk_ipg);
1886 out_put_per:
1887         clk_disable_unprepare(spi_imx->clk_per);
1888 out_controller_put:
1889         spi_controller_put(controller);
1890
1891         return ret;
1892 }
1893
1894 static void spi_imx_remove(struct platform_device *pdev)
1895 {
1896         struct spi_controller *controller = platform_get_drvdata(pdev);
1897         struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1898         int ret;
1899
1900         spi_unregister_controller(controller);
1901
1902         ret = pm_runtime_get_sync(spi_imx->dev);
1903         if (ret >= 0)
1904                 writel(0, spi_imx->base + MXC_CSPICTRL);
1905         else
1906                 dev_warn(spi_imx->dev, "failed to enable clock, skip hw disable\n");
1907
1908         pm_runtime_dont_use_autosuspend(spi_imx->dev);
1909         pm_runtime_put_sync(spi_imx->dev);
1910         pm_runtime_disable(spi_imx->dev);
1911
1912         spi_imx_sdma_exit(spi_imx);
1913 }
1914
1915 static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1916 {
1917         struct spi_controller *controller = dev_get_drvdata(dev);
1918         struct spi_imx_data *spi_imx;
1919         int ret;
1920
1921         spi_imx = spi_controller_get_devdata(controller);
1922
1923         ret = clk_prepare_enable(spi_imx->clk_per);
1924         if (ret)
1925                 return ret;
1926
1927         ret = clk_prepare_enable(spi_imx->clk_ipg);
1928         if (ret) {
1929                 clk_disable_unprepare(spi_imx->clk_per);
1930                 return ret;
1931         }
1932
1933         return 0;
1934 }
1935
1936 static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1937 {
1938         struct spi_controller *controller = dev_get_drvdata(dev);
1939         struct spi_imx_data *spi_imx;
1940
1941         spi_imx = spi_controller_get_devdata(controller);
1942
1943         clk_disable_unprepare(spi_imx->clk_per);
1944         clk_disable_unprepare(spi_imx->clk_ipg);
1945
1946         return 0;
1947 }
1948
1949 static int __maybe_unused spi_imx_suspend(struct device *dev)
1950 {
1951         pinctrl_pm_select_sleep_state(dev);
1952         return 0;
1953 }
1954
1955 static int __maybe_unused spi_imx_resume(struct device *dev)
1956 {
1957         pinctrl_pm_select_default_state(dev);
1958         return 0;
1959 }
1960
1961 static const struct dev_pm_ops imx_spi_pm = {
1962         SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1963                                 spi_imx_runtime_resume, NULL)
1964         SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1965 };
1966
1967 static struct platform_driver spi_imx_driver = {
1968         .driver = {
1969                    .name = DRIVER_NAME,
1970                    .of_match_table = spi_imx_dt_ids,
1971                    .pm = &imx_spi_pm,
1972         },
1973         .probe = spi_imx_probe,
1974         .remove_new = spi_imx_remove,
1975 };
1976 module_platform_driver(spi_imx_driver);
1977
1978 MODULE_DESCRIPTION("i.MX SPI Controller driver");
1979 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1980 MODULE_LICENSE("GPL");
1981 MODULE_ALIAS("platform:" DRIVER_NAME);