drivers/spi/spi-dw.c

   1 /*
   2  * Designware SPI core controller driver (refer pxa2xx_spi.c)
   3  *
   4  * Copyright (c) 2009, Intel Corporation.
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms and conditions of the GNU General Public License,
   8  * version 2, as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope it will be useful, but WITHOUT
  11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  * more details.
  14  *
  15  * You should have received a copy of the GNU General Public License along with
  16  * this program; if not, write to the Free Software Foundation, Inc.,
  17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18  */
  19
  20 #include <linux/dma-mapping.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/module.h>
  23 #include <linux/highmem.h>
  24 #include <linux/delay.h>
  25 #include <linux/slab.h>
  26 #include <linux/spi/spi.h>
  27
  28 #include "spi-dw.h"
  29
  30 #ifdef CONFIG_DEBUG_FS
  31 #include <linux/debugfs.h>
  32 #endif
  33
  34 #define START_STATE     ((void *)0)
  35 #define RUNNING_STATE   ((void *)1)
  36 #define DONE_STATE      ((void *)2)
  37 #define ERROR_STATE     ((void *)-1)
  38
  39 #define QUEUE_RUNNING   0
  40 #define QUEUE_STOPPED   1
  41
  42 #define MRST_SPI_DEASSERT       0
  43 #define MRST_SPI_ASSERT         1
  44
  45 /* Slave spi_dev related */
  46 struct chip_data {
  47         u16 cr0;
  48         u8 cs;                  /* chip select pin */
  49         u8 n_bytes;             /* current is a 1/2/4 byte op */
  50         u8 tmode;               /* TR/TO/RO/EEPROM */
  51         u8 type;                /* SPI/SSP/MicroWire */
  52
  53         u8 poll_mode;           /* 1 means use poll mode */
  54
  55         u32 dma_width;
  56         u32 rx_threshold;
  57         u32 tx_threshold;
  58         u8 enable_dma;
  59         u8 bits_per_word;
  60         u16 clk_div;            /* baud rate divider */
  61         u32 speed_hz;           /* baud rate */
  62         void (*cs_control)(u32 command);
  63 };
  64
  65 #ifdef CONFIG_DEBUG_FS
  66 #define SPI_REGS_BUFSIZE        1024
  67 static ssize_t  spi_show_regs(struct file *file, char __user *user_buf,
  68                                 size_t count, loff_t *ppos)
  69 {
  70         struct dw_spi *dws;
  71         char *buf;
  72         u32 len = 0;
  73         ssize_t ret;
  74
  75         dws = file->private_data;
  76
  77         buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
  78         if (!buf)
  79                 return 0;
  80
  81         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  82                         "MRST SPI0 registers:\n");
  83         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  84                         "=================================\n");
  85         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  86                         "CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0));
  87         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  88                         "CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1));
  89         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  90                         "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
  91         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  92                         "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER));
  93         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  94                         "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
  95         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  96                         "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR));
  97         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  98                         "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR));
  99         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 100                         "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
 101         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 102                         "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR));
 103         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 104                         "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR));
 105         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 106                         "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR));
 107         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 108                         "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR));
 109         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 110                         "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR));
 111         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 112                         "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR));
 113         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 114                         "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR));
 115         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 116                         "=================================\n");
 117
 118         ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 119         kfree(buf);
 120         return ret;
 121 }
 122
 123 static const struct file_operations mrst_spi_regs_ops = {
 124         .owner          = THIS_MODULE,
 125         .open           = simple_open,
 126         .read           = spi_show_regs,
 127         .llseek         = default_llseek,
 128 };
 129
 130 static int mrst_spi_debugfs_init(struct dw_spi *dws)
 131 {
 132         dws->debugfs = debugfs_create_dir("mrst_spi", NULL);
 133         if (!dws->debugfs)
 134                 return -ENOMEM;
 135
 136         debugfs_create_file("registers", S_IFREG | S_IRUGO,
 137                 dws->debugfs, (void *)dws, &mrst_spi_regs_ops);
 138         return 0;
 139 }
 140
 141 static void mrst_spi_debugfs_remove(struct dw_spi *dws)
 142 {
 143         if (dws->debugfs)
 144                 debugfs_remove_recursive(dws->debugfs);
 145 }
 146
 147 #else
 148 static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
 149 {
 150         return 0;
 151 }
 152
 153 static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
 154 {
 155 }
 156 #endif /* CONFIG_DEBUG_FS */
 157
 158 /* Return the max entries we can fill into tx fifo */
 159 static inline u32 tx_max(struct dw_spi *dws)
 160 {
 161         u32 tx_left, tx_room, rxtx_gap;
 162
 163         tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
 164         tx_room = dws->fifo_len - dw_readw(dws, DW_SPI_TXFLR);
 165
 166         /*
 167          * Another concern is about the tx/rx mismatch, we
 168          * though to use (dws->fifo_len - rxflr - txflr) as
 169          * one maximum value for tx, but it doesn't cover the
 170          * data which is out of tx/rx fifo and inside the
 171          * shift registers. So a control from sw point of
 172          * view is taken.
 173          */
 174         rxtx_gap =  ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx))
 175                         / dws->n_bytes;
 176
 177         return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap));
 178 }
 179
 180 /* Return the max entries we should read out of rx fifo */
 181 static inline u32 rx_max(struct dw_spi *dws)
 182 {
 183         u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
 184
 185         return min(rx_left, (u32)dw_readw(dws, DW_SPI_RXFLR));
 186 }
 187
 188 static void dw_writer(struct dw_spi *dws)
 189 {
 190         u32 max = tx_max(dws);
 191         u16 txw = 0;
 192
 193         while (max--) {
 194                 /* Set the tx word if the transfer's original "tx" is not null */
 195                 if (dws->tx_end - dws->len) {
 196                         if (dws->n_bytes == 1)
 197                                 txw = *(u8 *)(dws->tx);
 198                         else
 199                                 txw = *(u16 *)(dws->tx);
 200                 }
 201                 dw_writew(dws, DW_SPI_DR, txw);
 202                 dws->tx += dws->n_bytes;
 203         }
 204 }
 205
 206 static void dw_reader(struct dw_spi *dws)
 207 {
 208         u32 max = rx_max(dws);
 209         u16 rxw;
 210
 211         while (max--) {
 212                 rxw = dw_readw(dws, DW_SPI_DR);
 213                 /* Care rx only if the transfer's original "rx" is not null */
 214                 if (dws->rx_end - dws->len) {
 215                         if (dws->n_bytes == 1)
 216                                 *(u8 *)(dws->rx) = rxw;
 217                         else
 218                                 *(u16 *)(dws->rx) = rxw;
 219                 }
 220                 dws->rx += dws->n_bytes;
 221         }
 222 }
 223
 224 static void *next_transfer(struct dw_spi *dws)
 225 {
 226         struct spi_message *msg = dws->cur_msg;
 227         struct spi_transfer *trans = dws->cur_transfer;
 228
 229         /* Move to next transfer */
 230         if (trans->transfer_list.next != &msg->transfers) {
 231                 dws->cur_transfer =
 232                         list_entry(trans->transfer_list.next,
 233                                         struct spi_transfer,
 234                                         transfer_list);
 235                 return RUNNING_STATE;
 236         } else
 237                 return DONE_STATE;
 238 }
 239
 240 /*
 241  * Note: first step is the protocol driver prepares
 242  * a dma-capable memory, and this func just need translate
 243  * the virt addr to physical
 244  */
 245 static int map_dma_buffers(struct dw_spi *dws)
 246 {
 247         if (!dws->cur_msg->is_dma_mapped
 248                 || !dws->dma_inited
 249                 || !dws->cur_chip->enable_dma
 250                 || !dws->dma_ops)
 251                 return 0;
 252
 253         if (dws->cur_transfer->tx_dma)
 254                 dws->tx_dma = dws->cur_transfer->tx_dma;
 255
 256         if (dws->cur_transfer->rx_dma)
 257                 dws->rx_dma = dws->cur_transfer->rx_dma;
 258
 259         return 1;
 260 }
 261
 262 /* Caller already set message->status; dma and pio irqs are blocked */
 263 static void giveback(struct dw_spi *dws)
 264 {
 265         struct spi_transfer *last_transfer;
 266         unsigned long flags;
 267         struct spi_message *msg;
 268
 269         spin_lock_irqsave(&dws->lock, flags);
 270         msg = dws->cur_msg;
 271         dws->cur_msg = NULL;
 272         dws->cur_transfer = NULL;
 273         dws->prev_chip = dws->cur_chip;
 274         dws->cur_chip = NULL;
 275         dws->dma_mapped = 0;
 276         queue_work(dws->workqueue, &dws->pump_messages);
 277         spin_unlock_irqrestore(&dws->lock, flags);
 278
 279         last_transfer = list_last_entry(&msg->transfers, struct spi_transfer,
 280                                         transfer_list);
 281
 282         if (!last_transfer->cs_change && dws->cs_control)
 283                 dws->cs_control(MRST_SPI_DEASSERT);
 284
 285         msg->state = NULL;
 286         if (msg->complete)
 287                 msg->complete(msg->context);
 288 }
 289
 290 static void int_error_stop(struct dw_spi *dws, const char *msg)
 291 {
 292         /* Stop the hw */
 293         spi_enable_chip(dws, 0);
 294
 295         dev_err(&dws->master->dev, "%s\n", msg);
 296         dws->cur_msg->state = ERROR_STATE;
 297         tasklet_schedule(&dws->pump_transfers);
 298 }
 299
 300 void dw_spi_xfer_done(struct dw_spi *dws)
 301 {
 302         /* Update total byte transferred return count actual bytes read */
 303         dws->cur_msg->actual_length += dws->len;
 304
 305         /* Move to next transfer */
 306         dws->cur_msg->state = next_transfer(dws);
 307
 308         /* Handle end of message */
 309         if (dws->cur_msg->state == DONE_STATE) {
 310                 dws->cur_msg->status = 0;
 311                 giveback(dws);
 312         } else
 313                 tasklet_schedule(&dws->pump_transfers);
 314 }
 315 EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
 316
 317 static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 318 {
 319         u16 irq_status = dw_readw(dws, DW_SPI_ISR);
 320
 321         /* Error handling */
 322         if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
 323                 dw_readw(dws, DW_SPI_TXOICR);
 324                 dw_readw(dws, DW_SPI_RXOICR);
 325                 dw_readw(dws, DW_SPI_RXUICR);
 326                 int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
 327                 return IRQ_HANDLED;
 328         }
 329
 330         dw_reader(dws);
 331         if (dws->rx_end == dws->rx) {
 332                 spi_mask_intr(dws, SPI_INT_TXEI);
 333                 dw_spi_xfer_done(dws);
 334                 return IRQ_HANDLED;
 335         }
 336         if (irq_status & SPI_INT_TXEI) {
 337                 spi_mask_intr(dws, SPI_INT_TXEI);
 338                 dw_writer(dws);
 339                 /* Enable TX irq always, it will be disabled when RX finished */
 340                 spi_umask_intr(dws, SPI_INT_TXEI);
 341         }
 342
 343         return IRQ_HANDLED;
 344 }
 345
 346 static irqreturn_t dw_spi_irq(int irq, void *dev_id)
 347 {
 348         struct dw_spi *dws = dev_id;
 349         u16 irq_status = dw_readw(dws, DW_SPI_ISR) & 0x3f;
 350
 351         if (!irq_status)
 352                 return IRQ_NONE;
 353
 354         if (!dws->cur_msg) {
 355                 spi_mask_intr(dws, SPI_INT_TXEI);
 356                 return IRQ_HANDLED;
 357         }
 358
 359         return dws->transfer_handler(dws);
 360 }
 361
 362 /* Must be called inside pump_transfers() */
 363 static void poll_transfer(struct dw_spi *dws)
 364 {
 365         do {
 366                 dw_writer(dws);
 367                 dw_reader(dws);
 368                 cpu_relax();
 369         } while (dws->rx_end > dws->rx);
 370
 371         dw_spi_xfer_done(dws);
 372 }
 373
 374 static void pump_transfers(unsigned long data)
 375 {
 376         struct dw_spi *dws = (struct dw_spi *)data;
 377         struct spi_message *message = NULL;
 378         struct spi_transfer *transfer = NULL;
 379         struct spi_transfer *previous = NULL;
 380         struct spi_device *spi = NULL;
 381         struct chip_data *chip = NULL;
 382         u8 bits = 0;
 383         u8 imask = 0;
 384         u8 cs_change = 0;
 385         u16 txint_level = 0;
 386         u16 clk_div = 0;
 387         u32 speed = 0;
 388         u32 cr0 = 0;
 389
 390         /* Get current state information */
 391         message = dws->cur_msg;
 392         transfer = dws->cur_transfer;
 393         chip = dws->cur_chip;
 394         spi = message->spi;
 395
 396         if (unlikely(!chip->clk_div))
 397                 chip->clk_div = dws->max_freq / chip->speed_hz;
 398
 399         if (message->state == ERROR_STATE) {
 400                 message->status = -EIO;
 401                 goto early_exit;
 402         }
 403
 404         /* Handle end of message */
 405         if (message->state == DONE_STATE) {
 406                 message->status = 0;
 407                 goto early_exit;
 408         }
 409
 410         /* Delay if requested at end of transfer*/
 411         if (message->state == RUNNING_STATE) {
 412                 previous = list_entry(transfer->transfer_list.prev,
 413                                         struct spi_transfer,
 414                                         transfer_list);
 415                 if (previous->delay_usecs)
 416                         udelay(previous->delay_usecs);
 417         }
 418
 419         dws->n_bytes = chip->n_bytes;
 420         dws->dma_width = chip->dma_width;
 421         dws->cs_control = chip->cs_control;
 422
 423         dws->rx_dma = transfer->rx_dma;
 424         dws->tx_dma = transfer->tx_dma;
 425         dws->tx = (void *)transfer->tx_buf;
 426         dws->tx_end = dws->tx + transfer->len;
 427         dws->rx = transfer->rx_buf;
 428         dws->rx_end = dws->rx + transfer->len;
 429         dws->len = dws->cur_transfer->len;
 430         if (chip != dws->prev_chip)
 431                 cs_change = 1;
 432
 433         cr0 = chip->cr0;
 434
 435         /* Handle per transfer options for bpw and speed */
 436         if (transfer->speed_hz) {
 437                 speed = chip->speed_hz;
 438
 439                 if (transfer->speed_hz != speed) {
 440                         speed = transfer->speed_hz;
 441                         if (speed > dws->max_freq) {
 442                                 printk(KERN_ERR "MRST SPI0: unsupported"
 443                                         "freq: %dHz\n", speed);
 444                                 message->status = -EIO;
 445                                 goto early_exit;
 446                         }
 447
 448                         /* clk_div doesn't support odd number */
 449                         clk_div = dws->max_freq / speed;
 450                         clk_div = (clk_div + 1) & 0xfffe;
 451
 452                         chip->speed_hz = speed;
 453                         chip->clk_div = clk_div;
 454                 }
 455         }
 456         if (transfer->bits_per_word) {
 457                 bits = transfer->bits_per_word;
 458                 dws->n_bytes = dws->dma_width = bits >> 3;
 459                 cr0 = (bits - 1)
 460                         | (chip->type << SPI_FRF_OFFSET)
 461                         | (spi->mode << SPI_MODE_OFFSET)
 462                         | (chip->tmode << SPI_TMOD_OFFSET);
 463         }
 464         message->state = RUNNING_STATE;
 465
 466         /*
 467          * Adjust transfer mode if necessary. Requires platform dependent
 468          * chipselect mechanism.
 469          */
 470         if (dws->cs_control) {
 471                 if (dws->rx && dws->tx)
 472                         chip->tmode = SPI_TMOD_TR;
 473                 else if (dws->rx)
 474                         chip->tmode = SPI_TMOD_RO;
 475                 else
 476                         chip->tmode = SPI_TMOD_TO;
 477
 478                 cr0 &= ~SPI_TMOD_MASK;
 479                 cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
 480         }
 481
 482         /* Check if current transfer is a DMA transaction */
 483         dws->dma_mapped = map_dma_buffers(dws);
 484
 485         /*
 486          * Interrupt mode
 487          * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
 488          */
 489         if (!dws->dma_mapped && !chip->poll_mode) {
 490                 int templen = dws->len / dws->n_bytes;
 491                 txint_level = dws->fifo_len / 2;
 492                 txint_level = (templen > txint_level) ? txint_level : templen;
 493
 494                 imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI;
 495                 dws->transfer_handler = interrupt_transfer;
 496         }
 497
 498         /*
 499          * Reprogram registers only if
 500          *      1. chip select changes
 501          *      2. clk_div is changed
 502          *      3. control value changes
 503          */
 504         if (dw_readw(dws, DW_SPI_CTRL0) != cr0 || cs_change || clk_div || imask) {
 505                 spi_enable_chip(dws, 0);
 506
 507                 if (dw_readw(dws, DW_SPI_CTRL0) != cr0)
 508                         dw_writew(dws, DW_SPI_CTRL0, cr0);
 509
 510                 spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
 511                 spi_chip_sel(dws, spi->chip_select);
 512
 513                 /* Set the interrupt mask, for poll mode just disable all int */
 514                 spi_mask_intr(dws, 0xff);
 515                 if (imask)
 516                         spi_umask_intr(dws, imask);
 517                 if (txint_level)
 518                         dw_writew(dws, DW_SPI_TXFLTR, txint_level);
 519
 520                 spi_enable_chip(dws, 1);
 521                 if (cs_change)
 522                         dws->prev_chip = chip;
 523         }
 524
 525         if (dws->dma_mapped)
 526                 dws->dma_ops->dma_transfer(dws, cs_change);
 527
 528         if (chip->poll_mode)
 529                 poll_transfer(dws);
 530
 531         return;
 532
 533 early_exit:
 534         giveback(dws);
 535         return;
 536 }
 537
 538 static void pump_messages(struct work_struct *work)
 539 {
 540         struct dw_spi *dws =
 541                 container_of(work, struct dw_spi, pump_messages);
 542         unsigned long flags;
 543
 544         /* Lock queue and check for queue work */
 545         spin_lock_irqsave(&dws->lock, flags);
 546         if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) {
 547                 dws->busy = 0;
 548                 spin_unlock_irqrestore(&dws->lock, flags);
 549                 return;
 550         }
 551
 552         /* Make sure we are not already running a message */
 553         if (dws->cur_msg) {
 554                 spin_unlock_irqrestore(&dws->lock, flags);
 555                 return;
 556         }
 557
 558         /* Extract head of queue */
 559         dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue);
 560         list_del_init(&dws->cur_msg->queue);
 561
 562         /* Initial message state*/
 563         dws->cur_msg->state = START_STATE;
 564         dws->cur_transfer = list_entry(dws->cur_msg->transfers.next,
 565                                                 struct spi_transfer,
 566                                                 transfer_list);
 567         dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi);
 568
 569         /* Mark as busy and launch transfers */
 570         tasklet_schedule(&dws->pump_transfers);
 571
 572         dws->busy = 1;
 573         spin_unlock_irqrestore(&dws->lock, flags);
 574 }
 575
 576 /* spi_device use this to queue in their spi_msg */
 577 static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 578 {
 579         struct dw_spi *dws = spi_master_get_devdata(spi->master);
 580         unsigned long flags;
 581
 582         spin_lock_irqsave(&dws->lock, flags);
 583
 584         if (dws->run == QUEUE_STOPPED) {
 585                 spin_unlock_irqrestore(&dws->lock, flags);
 586                 return -ESHUTDOWN;
 587         }
 588
 589         msg->actual_length = 0;
 590         msg->status = -EINPROGRESS;
 591         msg->state = START_STATE;
 592
 593         list_add_tail(&msg->queue, &dws->queue);
 594
 595         if (dws->run == QUEUE_RUNNING && !dws->busy) {
 596
 597                 if (dws->cur_transfer || dws->cur_msg)
 598                         queue_work(dws->workqueue,
 599                                         &dws->pump_messages);
 600                 else {
 601                         /* If no other data transaction in air, just go */
 602                         spin_unlock_irqrestore(&dws->lock, flags);
 603                         pump_messages(&dws->pump_messages);
 604                         return 0;
 605                 }
 606         }
 607
 608         spin_unlock_irqrestore(&dws->lock, flags);
 609         return 0;
 610 }
 611
 612 /* This may be called twice for each spi dev */
 613 static int dw_spi_setup(struct spi_device *spi)
 614 {
 615         struct dw_spi_chip *chip_info = NULL;
 616         struct chip_data *chip;
 617
 618         /* Only alloc on first setup */
 619         chip = spi_get_ctldata(spi);
 620         if (!chip) {
 621                 chip = devm_kzalloc(&spi->dev, sizeof(struct chip_data),
 622                                 GFP_KERNEL);
 623                 if (!chip)
 624                         return -ENOMEM;
 625                 spi_set_ctldata(spi, chip);
 626         }
 627
 628         /*
 629          * Protocol drivers may change the chip settings, so...
 630          * if chip_info exists, use it
 631          */
 632         chip_info = spi->controller_data;
 633
 634         /* chip_info doesn't always exist */
 635         if (chip_info) {
 636                 if (chip_info->cs_control)
 637                         chip->cs_control = chip_info->cs_control;
 638
 639                 chip->poll_mode = chip_info->poll_mode;
 640                 chip->type = chip_info->type;
 641
 642                 chip->rx_threshold = 0;
 643                 chip->tx_threshold = 0;
 644
 645                 chip->enable_dma = chip_info->enable_dma;
 646         }
 647
 648         if (spi->bits_per_word == 8) {
 649                 chip->n_bytes = 1;
 650                 chip->dma_width = 1;
 651         } else if (spi->bits_per_word == 16) {
 652                 chip->n_bytes = 2;
 653                 chip->dma_width = 2;
 654         }
 655         chip->bits_per_word = spi->bits_per_word;
 656
 657         if (!spi->max_speed_hz) {
 658                 dev_err(&spi->dev, "No max speed HZ parameter\n");
 659                 return -EINVAL;
 660         }
 661         chip->speed_hz = spi->max_speed_hz;
 662
 663         chip->tmode = 0; /* Tx & Rx */
 664         /* Default SPI mode is SCPOL = 0, SCPH = 0 */
 665         chip->cr0 = (chip->bits_per_word - 1)
 666                         | (chip->type << SPI_FRF_OFFSET)
 667                         | (spi->mode  << SPI_MODE_OFFSET)
 668                         | (chip->tmode << SPI_TMOD_OFFSET);
 669
 670         return 0;
 671 }
 672
 673 static void dw_spi_cleanup(struct spi_device *spi)
 674 {
 675         struct chip_data *chip = spi_get_ctldata(spi);
 676         kfree(chip);
 677 }
 678
 679 static int init_queue(struct dw_spi *dws)
 680 {
 681         INIT_LIST_HEAD(&dws->queue);
 682         spin_lock_init(&dws->lock);
 683
 684         dws->run = QUEUE_STOPPED;
 685         dws->busy = 0;
 686
 687         tasklet_init(&dws->pump_transfers,
 688                         pump_transfers, (unsigned long)dws);
 689
 690         INIT_WORK(&dws->pump_messages, pump_messages);
 691         dws->workqueue = create_singlethread_workqueue(
 692                                         dev_name(dws->master->dev.parent));
 693         if (dws->workqueue == NULL)
 694                 return -EBUSY;
 695
 696         return 0;
 697 }
 698
 699 static int start_queue(struct dw_spi *dws)
 700 {
 701         unsigned long flags;
 702
 703         spin_lock_irqsave(&dws->lock, flags);
 704
 705         if (dws->run == QUEUE_RUNNING || dws->busy) {
 706                 spin_unlock_irqrestore(&dws->lock, flags);
 707                 return -EBUSY;
 708         }
 709
 710         dws->run = QUEUE_RUNNING;
 711         dws->cur_msg = NULL;
 712         dws->cur_transfer = NULL;
 713         dws->cur_chip = NULL;
 714         dws->prev_chip = NULL;
 715         spin_unlock_irqrestore(&dws->lock, flags);
 716
 717         queue_work(dws->workqueue, &dws->pump_messages);
 718
 719         return 0;
 720 }
 721
 722 static int stop_queue(struct dw_spi *dws)
 723 {
 724         unsigned long flags;
 725         unsigned limit = 50;
 726         int status = 0;
 727
 728         spin_lock_irqsave(&dws->lock, flags);
 729         dws->run = QUEUE_STOPPED;
 730         while ((!list_empty(&dws->queue) || dws->busy) && limit--) {
 731                 spin_unlock_irqrestore(&dws->lock, flags);
 732                 msleep(10);
 733                 spin_lock_irqsave(&dws->lock, flags);
 734         }
 735
 736         if (!list_empty(&dws->queue) || dws->busy)
 737                 status = -EBUSY;
 738         spin_unlock_irqrestore(&dws->lock, flags);
 739
 740         return status;
 741 }
 742
 743 static int destroy_queue(struct dw_spi *dws)
 744 {
 745         int status;
 746
 747         status = stop_queue(dws);
 748         if (status != 0)
 749                 return status;
 750         destroy_workqueue(dws->workqueue);
 751         return 0;
 752 }
 753
 754 /* Restart the controller, disable all interrupts, clean rx fifo */
 755 static void spi_hw_init(struct dw_spi *dws)
 756 {
 757         spi_enable_chip(dws, 0);
 758         spi_mask_intr(dws, 0xff);
 759         spi_enable_chip(dws, 1);
 760
 761         /*
 762          * Try to detect the FIFO depth if not set by interface driver,
 763          * the depth could be from 2 to 256 from HW spec
 764          */
 765         if (!dws->fifo_len) {
 766                 u32 fifo;
 767                 for (fifo = 2; fifo <= 257; fifo++) {
 768                         dw_writew(dws, DW_SPI_TXFLTR, fifo);
 769                         if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
 770                                 break;
 771                 }
 772
 773                 dws->fifo_len = (fifo == 257) ? 0 : fifo;
 774                 dw_writew(dws, DW_SPI_TXFLTR, 0);
 775         }
 776 }
 777
 778 int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 779 {
 780         struct spi_master *master;
 781         int ret;
 782
 783         BUG_ON(dws == NULL);
 784
 785         master = spi_alloc_master(dev, 0);
 786         if (!master)
 787                 return -ENOMEM;
 788
 789         dws->master = master;
 790         dws->type = SSI_MOTO_SPI;
 791         dws->prev_chip = NULL;
 792         dws->dma_inited = 0;
 793         dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
 794         snprintf(dws->name, sizeof(dws->name), "dw_spi%d",
 795                         dws->bus_num);
 796
 797         ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED,
 798                         dws->name, dws);
 799         if (ret < 0) {
 800                 dev_err(&master->dev, "can not get IRQ\n");
 801                 goto err_free_master;
 802         }
 803
 804         master->mode_bits = SPI_CPOL | SPI_CPHA;
 805         master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 806         master->bus_num = dws->bus_num;
 807         master->num_chipselect = dws->num_cs;
 808         master->cleanup = dw_spi_cleanup;
 809         master->setup = dw_spi_setup;
 810         master->transfer = dw_spi_transfer;
 811
 812         /* Basic HW init */
 813         spi_hw_init(dws);
 814
 815         if (dws->dma_ops && dws->dma_ops->dma_init) {
 816                 ret = dws->dma_ops->dma_init(dws);
 817                 if (ret) {
 818                         dev_warn(&master->dev, "DMA init failed\n");
 819                         dws->dma_inited = 0;
 820                 }
 821         }
 822
 823         /* Initial and start queue */
 824         ret = init_queue(dws);
 825         if (ret) {
 826                 dev_err(&master->dev, "problem initializing queue\n");
 827                 goto err_diable_hw;
 828         }
 829         ret = start_queue(dws);
 830         if (ret) {
 831                 dev_err(&master->dev, "problem starting queue\n");
 832                 goto err_diable_hw;
 833         }
 834
 835         spi_master_set_devdata(master, dws);
 836         ret = devm_spi_register_master(dev, master);
 837         if (ret) {
 838                 dev_err(&master->dev, "problem registering spi master\n");
 839                 goto err_queue_alloc;
 840         }
 841
 842         mrst_spi_debugfs_init(dws);
 843         return 0;
 844
 845 err_queue_alloc:
 846         destroy_queue(dws);
 847         if (dws->dma_ops && dws->dma_ops->dma_exit)
 848                 dws->dma_ops->dma_exit(dws);
 849 err_diable_hw:
 850         spi_enable_chip(dws, 0);
 851 err_free_master:
 852         spi_master_put(master);
 853         return ret;
 854 }
 855 EXPORT_SYMBOL_GPL(dw_spi_add_host);
 856
 857 void dw_spi_remove_host(struct dw_spi *dws)
 858 {
 859         int status = 0;
 860
 861         if (!dws)
 862                 return;
 863         mrst_spi_debugfs_remove(dws);
 864
 865         /* Remove the queue */
 866         status = destroy_queue(dws);
 867         if (status != 0)
 868                 dev_err(&dws->master->dev,
 869                         "dw_spi_remove: workqueue will not complete, message memory not freed\n");
 870
 871         if (dws->dma_ops && dws->dma_ops->dma_exit)
 872                 dws->dma_ops->dma_exit(dws);
 873         spi_enable_chip(dws, 0);
 874         /* Disable clk */
 875         spi_set_clk(dws, 0);
 876 }
 877 EXPORT_SYMBOL_GPL(dw_spi_remove_host);
 878
 879 int dw_spi_suspend_host(struct dw_spi *dws)
 880 {
 881         int ret = 0;
 882
 883         ret = stop_queue(dws);
 884         if (ret)
 885                 return ret;
 886         spi_enable_chip(dws, 0);
 887         spi_set_clk(dws, 0);
 888         return ret;
 889 }
 890 EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
 891
 892 int dw_spi_resume_host(struct dw_spi *dws)
 893 {
 894         int ret;
 895
 896         spi_hw_init(dws);
 897         ret = start_queue(dws);
 898         if (ret)
 899                 dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
 900         return ret;
 901 }
 902 EXPORT_SYMBOL_GPL(dw_spi_resume_host);
 903
 904 MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
 905 MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
 906 MODULE_LICENSE("GPL v2");