Merge branch 'address-masking'
[linux-2.6-microblaze.git] / drivers / soc / qcom / rpmh-internal.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
4  */
5
6
7 #ifndef __RPM_INTERNAL_H__
8 #define __RPM_INTERNAL_H__
9
10 #include <linux/bitmap.h>
11 #include <linux/wait.h>
12 #include <soc/qcom/tcs.h>
13
14 #define TCS_TYPE_NR                     4
15 #define MAX_CMDS_PER_TCS                16
16 #define MAX_TCS_PER_TYPE                3
17 #define MAX_TCS_NR                      (MAX_TCS_PER_TYPE * TCS_TYPE_NR)
18 #define MAX_TCS_SLOTS                   (MAX_CMDS_PER_TCS * MAX_TCS_PER_TYPE)
19
20 struct rsc_drv;
21
22 /**
23  * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests
24  * to the controller
25  *
26  * @drv:       The controller.
27  * @type:      Type of the TCS in this group - active, sleep, wake.
28  * @mask:      Mask of the TCSes relative to all the TCSes in the RSC.
29  * @offset:    Start of the TCS group relative to the TCSes in the RSC.
30  * @num_tcs:   Number of TCSes in this type.
31  * @ncpt:      Number of commands in each TCS.
32  * @req:       Requests that are sent from the TCS; only used for ACTIVE_ONLY
33  *             transfers (could be on a wake/sleep TCS if we are borrowing for
34  *             an ACTIVE_ONLY transfer).
35  *             Start: grab drv->lock, set req, set tcs_in_use, drop drv->lock,
36  *                    trigger
37  *             End: get irq, access req,
38  *                  grab drv->lock, clear tcs_in_use, drop drv->lock
39  * @slots:     Indicates which of @cmd_addr are occupied; only used for
40  *             SLEEP / WAKE TCSs.  Things are tightly packed in the
41  *             case that (ncpt < MAX_CMDS_PER_TCS).  That is if ncpt = 2 and
42  *             MAX_CMDS_PER_TCS = 16 then bit[2] = the first bit in 2nd TCS.
43  */
44 struct tcs_group {
45         struct rsc_drv *drv;
46         int type;
47         u32 mask;
48         u32 offset;
49         int num_tcs;
50         int ncpt;
51         const struct tcs_request *req[MAX_TCS_PER_TYPE];
52         DECLARE_BITMAP(slots, MAX_TCS_SLOTS);
53 };
54
55 /**
56  * struct rpmh_request: the message to be sent to rpmh-rsc
57  *
58  * @msg: the request
59  * @cmd: the payload that will be part of the @msg
60  * @completion: triggered when request is done
61  * @dev: the device making the request
62  * @needs_free: check to free dynamically allocated request object
63  */
64 struct rpmh_request {
65         struct tcs_request msg;
66         struct tcs_cmd cmd[MAX_RPMH_PAYLOAD];
67         struct completion *completion;
68         const struct device *dev;
69         bool needs_free;
70 };
71
72 /**
73  * struct rpmh_ctrlr: our representation of the controller
74  *
75  * @cache: the list of cached requests
76  * @cache_lock: synchronize access to the cache data
77  * @dirty: was the cache updated since flush
78  * @batch_cache: Cache sleep and wake requests sent as batch
79  */
80 struct rpmh_ctrlr {
81         struct list_head cache;
82         spinlock_t cache_lock;
83         bool dirty;
84         struct list_head batch_cache;
85 };
86
87 struct rsc_ver {
88         u32 major;
89         u32 minor;
90 };
91
92 /**
93  * struct rsc_drv: the Direct Resource Voter (DRV) of the
94  * Resource State Coordinator controller (RSC)
95  *
96  * @name:               Controller identifier.
97  * @base:               Start address of the DRV registers in this controller.
98  * @tcs_base:           Start address of the TCS registers in this controller.
99  * @id:                 Instance id in the controller (Direct Resource Voter).
100  * @num_tcs:            Number of TCSes in this DRV.
101  * @rsc_pm:             CPU PM notifier for controller.
102  *                      Used when solver mode is not present.
103  * @cpus_in_pm:         Number of CPUs not in idle power collapse.
104  *                      Used when solver mode and "power-domains" is not present.
105  * @genpd_nb:           PM Domain notifier for cluster genpd notifications.
106  * @tcs:                TCS groups.
107  * @tcs_in_use:         S/W state of the TCS; only set for ACTIVE_ONLY
108  *                      transfers, but might show a sleep/wake TCS in use if
109  *                      it was borrowed for an active_only transfer.  You
110  *                      must hold the lock in this struct (AKA drv->lock) in
111  *                      order to update this.
112  * @lock:               Synchronize state of the controller.  If RPMH's cache
113  *                      lock will also be held, the order is: drv->lock then
114  *                      cache_lock.
115  * @tcs_wait:           Wait queue used to wait for @tcs_in_use to free up a
116  *                      slot
117  * @client:             Handle to the DRV's client.
118  * @dev:                RSC device.
119  */
120 struct rsc_drv {
121         const char *name;
122         void __iomem *base;
123         void __iomem *tcs_base;
124         int id;
125         int num_tcs;
126         struct notifier_block rsc_pm;
127         struct notifier_block genpd_nb;
128         atomic_t cpus_in_pm;
129         struct tcs_group tcs[TCS_TYPE_NR];
130         DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
131         spinlock_t lock;
132         wait_queue_head_t tcs_wait;
133         struct rpmh_ctrlr client;
134         struct device *dev;
135         struct rsc_ver ver;
136         u32 *regs;
137 };
138
139 int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
140 int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
141                              const struct tcs_request *msg);
142 void rpmh_rsc_invalidate(struct rsc_drv *drv);
143 void rpmh_rsc_write_next_wakeup(struct rsc_drv *drv);
144
145 void rpmh_tx_done(const struct tcs_request *msg);
146 int rpmh_flush(struct rpmh_ctrlr *ctrlr);
147
148 #endif /* __RPM_INTERNAL_H__ */