1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
4 * of PCI-SCSI IO processors.
6 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
7 * Copyright (c) 2003-2005 Matthew Wilcox <matthew@wil.cx>
9 * This driver is derived from the Linux sym53c8xx driver.
10 * Copyright (C) 1998-2000 Gerard Roudier
12 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
13 * a port of the FreeBSD ncr driver to Linux-1.2.13.
15 * The original ncr driver has been written for 386bsd and FreeBSD by
16 * Wolfgang Stanglmeier <wolf@cologne.de>
17 * Stefan Esser <se@mi.Uni-Koeln.de>
18 * Copyright (C) 1994 Wolfgang Stanglmeier
20 * Other major contributions:
22 * NVRAM detection and reading.
23 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
25 *-----------------------------------------------------------------------------
28 #include <linux/slab.h>
29 #include <asm/param.h> /* for timeouts in units of HZ */
32 #include "sym_nvram.h"
35 #define SYM_DEBUG_GENERIC_SUPPORT
39 * Needed function prototypes.
41 static void sym_int_ma (struct sym_hcb *np);
42 static void sym_int_sir(struct sym_hcb *);
43 static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np);
44 static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa);
45 static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln);
46 static void sym_complete_error (struct sym_hcb *np, struct sym_ccb *cp);
47 static void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp);
48 static int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp);
51 * Print a buffer in hexadecimal format with a ".\n" at end.
53 static void sym_printl_hex(u_char *p, int n)
60 static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
62 sym_print_addr(cp->cmd, "%s: ", label);
68 static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg)
70 struct sym_tcb *tp = &np->target[target];
71 dev_info(&tp->starget->dev, "%s: ", label);
78 * Print something that tells about extended errors.
80 void sym_print_xerr(struct scsi_cmnd *cmd, int x_status)
82 if (x_status & XE_PARITY_ERR) {
83 sym_print_addr(cmd, "unrecovered SCSI parity error.\n");
85 if (x_status & XE_EXTRA_DATA) {
86 sym_print_addr(cmd, "extraneous data discarded.\n");
88 if (x_status & XE_BAD_PHASE) {
89 sym_print_addr(cmd, "illegal scsi phase (4/5).\n");
91 if (x_status & XE_SODL_UNRUN) {
92 sym_print_addr(cmd, "ODD transfer in DATA OUT phase.\n");
94 if (x_status & XE_SWIDE_OVRUN) {
95 sym_print_addr(cmd, "ODD transfer in DATA IN phase.\n");
100 * Return a string for SCSI BUS mode.
102 static char *sym_scsi_bus_mode(int mode)
105 case SMODE_HVD: return "HVD";
106 case SMODE_SE: return "SE";
107 case SMODE_LVD: return "LVD";
113 * Soft reset the chip.
115 * Raising SRST when the chip is running may cause
116 * problems on dual function chips (see below).
117 * On the other hand, LVD devices need some delay
118 * to settle and report actual BUS mode in STEST4.
120 static void sym_chip_reset (struct sym_hcb *np)
122 OUTB(np, nc_istat, SRST);
125 OUTB(np, nc_istat, 0);
127 udelay(2000); /* For BUS MODE to settle */
131 * Really soft reset the chip.:)
133 * Some 896 and 876 chip revisions may hang-up if we set
134 * the SRST (soft reset) bit at the wrong time when SCRIPTS
136 * So, we need to abort the current operation prior to
137 * soft resetting the chip.
139 static void sym_soft_reset (struct sym_hcb *np)
144 if (!(np->features & FE_ISTAT1) || !(INB(np, nc_istat1) & SCRUN))
147 OUTB(np, nc_istat, CABRT);
148 for (i = 100000 ; i ; --i) {
149 istat = INB(np, nc_istat);
153 else if (istat & DIP) {
154 if (INB(np, nc_dstat) & ABRT)
159 OUTB(np, nc_istat, 0);
161 printf("%s: unable to abort current chip operation, "
162 "ISTAT=0x%02x.\n", sym_name(np), istat);
168 * Start reset process.
170 * The interrupt handler will reinitialize the chip.
172 static void sym_start_reset(struct sym_hcb *np)
174 sym_reset_scsi_bus(np, 1);
177 int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int)
182 sym_soft_reset(np); /* Soft reset the chip */
184 OUTW(np, nc_sien, RST);
186 * Enable Tolerant, reset IRQD if present and
187 * properly set IRQ mode, prior to resetting the bus.
189 OUTB(np, nc_stest3, TE);
190 OUTB(np, nc_dcntl, (np->rv_dcntl & IRQM));
191 OUTB(np, nc_scntl1, CRST);
195 if (!SYM_SETUP_SCSI_BUS_CHECK)
198 * Check for no terminators or SCSI bus shorts to ground.
199 * Read SCSI data bus, data parity bits and control signals.
200 * We are expecting RESET to be TRUE and other signals to be
203 term = INB(np, nc_sstat0);
204 term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */
205 term |= ((INB(np, nc_sstat2) & 0x01) << 26) | /* sdp1 */
206 ((INW(np, nc_sbdl) & 0xff) << 9) | /* d7-0 */
207 ((INW(np, nc_sbdl) & 0xff00) << 10) | /* d15-8 */
208 INB(np, nc_sbcl); /* req ack bsy sel atn msg cd io */
213 if (term != (2<<7)) {
214 printf("%s: suspicious SCSI data while resetting the BUS.\n",
216 printf("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
217 "0x%lx, expecting 0x%lx\n",
219 (np->features & FE_WIDE) ? "dp1,d15-8," : "",
220 (u_long)term, (u_long)(2<<7));
221 if (SYM_SETUP_SCSI_BUS_CHECK == 1)
225 OUTB(np, nc_scntl1, 0);
230 * Select SCSI clock frequency
232 static void sym_selectclock(struct sym_hcb *np, u_char scntl3)
235 * If multiplier not present or not selected, leave here.
237 if (np->multiplier <= 1) {
238 OUTB(np, nc_scntl3, scntl3);
242 if (sym_verbose >= 2)
243 printf ("%s: enabling clock multiplier\n", sym_name(np));
245 OUTB(np, nc_stest1, DBLEN); /* Enable clock multiplier */
247 * Wait for the LCKFRQ bit to be set if supported by the chip.
248 * Otherwise wait 50 micro-seconds (at least).
250 if (np->features & FE_LCKFRQ) {
252 while (!(INB(np, nc_stest4) & LCKFRQ) && --i > 0)
255 printf("%s: the chip cannot lock the frequency\n",
261 OUTB(np, nc_stest3, HSC); /* Halt the scsi clock */
262 OUTB(np, nc_scntl3, scntl3);
263 OUTB(np, nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
264 OUTB(np, nc_stest3, 0x00); /* Restart scsi clock */
269 * Determine the chip's clock frequency.
271 * This is essential for the negotiation of the synchronous
274 * Note: we have to return the correct value.
275 * THERE IS NO SAFE DEFAULT VALUE.
277 * Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
278 * 53C860 and 53C875 rev. 1 support fast20 transfers but
279 * do not have a clock doubler and so are provided with a
280 * 80 MHz clock. All other fast20 boards incorporate a doubler
281 * and so should be delivered with a 40 MHz clock.
282 * The recent fast40 chips (895/896/895A/1010) use a 40 Mhz base
283 * clock and provide a clock quadrupler (160 Mhz).
287 * calculate SCSI clock frequency (in KHz)
289 static unsigned getfreq (struct sym_hcb *np, int gen)
295 * Measure GEN timer delay in order
296 * to calculate SCSI clock frequency
298 * This code will never execute too
299 * many loop iterations (if DELAY is
300 * reasonably correct). It could get
301 * too low a delay (too high a freq.)
302 * if the CPU is slow executing the
303 * loop for some reason (an NMI, for
304 * example). For this reason we will
305 * if multiple measurements are to be
306 * performed trust the higher delay
307 * (lower frequency returned).
309 OUTW(np, nc_sien, 0); /* mask all scsi interrupts */
310 INW(np, nc_sist); /* clear pending scsi interrupt */
311 OUTB(np, nc_dien, 0); /* mask all dma interrupts */
312 INW(np, nc_sist); /* another one, just to be sure :) */
314 * The C1010-33 core does not report GEN in SIST,
315 * if this interrupt is masked in SIEN.
316 * I don't know yet if the C1010-66 behaves the same way.
318 if (np->features & FE_C10) {
319 OUTW(np, nc_sien, GEN);
320 OUTB(np, nc_istat1, SIRQD);
322 OUTB(np, nc_scntl3, 4); /* set pre-scaler to divide by 3 */
323 OUTB(np, nc_stime1, 0); /* disable general purpose timer */
324 OUTB(np, nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */
325 while (!(INW(np, nc_sist) & GEN) && ms++ < 100000)
326 udelay(1000/4); /* count in 1/4 of ms */
327 OUTB(np, nc_stime1, 0); /* disable general purpose timer */
329 * Undo C1010-33 specific settings.
331 if (np->features & FE_C10) {
332 OUTW(np, nc_sien, 0);
333 OUTB(np, nc_istat1, 0);
336 * set prescaler to divide by whatever 0 means
337 * 0 ought to choose divide by 2, but appears
338 * to set divide by 3.5 mode in my 53c810 ...
340 OUTB(np, nc_scntl3, 0);
343 * adjust for prescaler, and convert into KHz
345 f = ms ? ((1 << gen) * (4340*4)) / ms : 0;
348 * The C1010-33 result is biased by a factor
349 * of 2/3 compared to earlier chips.
351 if (np->features & FE_C10)
354 if (sym_verbose >= 2)
355 printf ("%s: Delay (GEN=%d): %u msec, %u KHz\n",
356 sym_name(np), gen, ms/4, f);
361 static unsigned sym_getfreq (struct sym_hcb *np)
366 getfreq (np, gen); /* throw away first result */
367 f1 = getfreq (np, gen);
368 f2 = getfreq (np, gen);
369 if (f1 > f2) f1 = f2; /* trust lower result */
374 * Get/probe chip SCSI clock frequency
376 static void sym_getclock (struct sym_hcb *np, int mult)
378 unsigned char scntl3 = np->sv_scntl3;
379 unsigned char stest1 = np->sv_stest1;
385 * True with 875/895/896/895A with clock multiplier selected
387 if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) {
388 if (sym_verbose >= 2)
389 printf ("%s: clock multiplier found\n", sym_name(np));
390 np->multiplier = mult;
394 * If multiplier not found or scntl3 not 7,5,3,
395 * reset chip and get frequency from general purpose timer.
396 * Otherwise trust scntl3 BIOS setting.
398 if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) {
399 OUTB(np, nc_stest1, 0); /* make sure doubler is OFF */
400 f1 = sym_getfreq (np);
403 printf ("%s: chip clock is %uKHz\n", sym_name(np), f1);
405 if (f1 < 45000) f1 = 40000;
406 else if (f1 < 55000) f1 = 50000;
409 if (f1 < 80000 && mult > 1) {
410 if (sym_verbose >= 2)
411 printf ("%s: clock multiplier assumed\n",
413 np->multiplier = mult;
416 if ((scntl3 & 7) == 3) f1 = 40000;
417 else if ((scntl3 & 7) == 5) f1 = 80000;
420 f1 /= np->multiplier;
424 * Compute controller synchronous parameters.
426 f1 *= np->multiplier;
431 * Get/probe PCI clock frequency
433 static int sym_getpciclock (struct sym_hcb *np)
438 * For now, we only need to know about the actual
439 * PCI BUS clock frequency for C1010-66 chips.
442 if (np->features & FE_66MHZ) {
446 OUTB(np, nc_stest1, SCLK); /* Use the PCI clock as SCSI clock */
448 OUTB(np, nc_stest1, 0);
456 * SYMBIOS chip clock divisor table.
458 * Divisors are multiplied by 10,000,000 in order to make
459 * calculations more simple.
462 static const u32 div_10M[] = {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
465 * Get clock factor and sync divisor for a given
466 * synchronous factor period.
469 sym_getsync(struct sym_hcb *np, u_char dt, u_char sfac, u_char *divp, u_char *fakp)
471 u32 clk = np->clock_khz; /* SCSI clock frequency in kHz */
472 int div = np->clock_divn; /* Number of divisors supported */
473 u32 fak; /* Sync factor in sxfer */
474 u32 per; /* Period in tenths of ns */
475 u32 kpc; /* (per * clk) */
479 * Compute the synchronous period in tenths of nano-seconds
481 if (dt && sfac <= 9) per = 125;
482 else if (sfac <= 10) per = 250;
483 else if (sfac == 11) per = 303;
484 else if (sfac == 12) per = 500;
485 else per = 40 * sfac;
493 * For earliest C10 revision 0, we cannot use extra
494 * clocks for the setting of the SCSI clocking.
495 * Note that this limits the lowest sync data transfer
496 * to 5 Mega-transfers per second and may result in
497 * using higher clock divisors.
500 if ((np->features & (FE_C10|FE_U3EN)) == FE_C10) {
502 * Look for the lowest clock divisor that allows an
503 * output speed not faster than the period.
507 if (kpc > (div_10M[div] << 2)) {
512 fak = 0; /* No extra clocks */
513 if (div == np->clock_divn) { /* Are we too fast ? */
523 * Look for the greatest clock divisor that allows an
524 * input speed faster than the period.
527 if (kpc >= (div_10M[div] << 2)) break;
530 * Calculate the lowest clock factor that allows an output
531 * speed not faster than the period, and the max output speed.
532 * If fak >= 1 we will set both XCLKH_ST and XCLKH_DT.
533 * If fak >= 2 we will also set XCLKS_ST and XCLKS_DT.
536 fak = (kpc - 1) / (div_10M[div] << 1) + 1 - 2;
537 /* ret = ((2+fak)*div_10M[div])/np->clock_khz; */
539 fak = (kpc - 1) / div_10M[div] + 1 - 4;
540 /* ret = ((4+fak)*div_10M[div])/np->clock_khz; */
544 * Check against our hardware limits, or bugs :).
552 * Compute and return sync parameters.
561 * SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64,
562 * 128 transfers. All chips support at least 16 transfers
563 * bursts. The 825A, 875 and 895 chips support bursts of up
564 * to 128 transfers and the 895A and 896 support bursts of up
565 * to 64 transfers. All other chips support up to 16
568 * For PCI 32 bit data transfers each transfer is a DWORD.
569 * It is a QUADWORD (8 bytes) for PCI 64 bit data transfers.
571 * We use log base 2 (burst length) as internal code, with
572 * value 0 meaning "burst disabled".
576 * Burst length from burst code.
578 #define burst_length(bc) (!(bc))? 0 : 1 << (bc)
581 * Burst code from io register bits.
583 #define burst_code(dmode, ctest4, ctest5) \
584 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
587 * Set initial io register bits from burst code.
589 static inline void sym_init_burst(struct sym_hcb *np, u_char bc)
591 np->rv_ctest4 &= ~0x80;
592 np->rv_dmode &= ~(0x3 << 6);
593 np->rv_ctest5 &= ~0x4;
596 np->rv_ctest4 |= 0x80;
600 np->rv_dmode |= ((bc & 0x3) << 6);
601 np->rv_ctest5 |= (bc & 0x4);
606 * Save initial settings of some IO registers.
607 * Assumed to have been set by BIOS.
608 * We cannot reset the chip prior to reading the
609 * IO registers, since informations will be lost.
610 * Since the SCRIPTS processor may be running, this
611 * is not safe on paper, but it seems to work quite
614 static void sym_save_initial_setting (struct sym_hcb *np)
616 np->sv_scntl0 = INB(np, nc_scntl0) & 0x0a;
617 np->sv_scntl3 = INB(np, nc_scntl3) & 0x07;
618 np->sv_dmode = INB(np, nc_dmode) & 0xce;
619 np->sv_dcntl = INB(np, nc_dcntl) & 0xa8;
620 np->sv_ctest3 = INB(np, nc_ctest3) & 0x01;
621 np->sv_ctest4 = INB(np, nc_ctest4) & 0x80;
622 np->sv_gpcntl = INB(np, nc_gpcntl);
623 np->sv_stest1 = INB(np, nc_stest1);
624 np->sv_stest2 = INB(np, nc_stest2) & 0x20;
625 np->sv_stest4 = INB(np, nc_stest4);
626 if (np->features & FE_C10) { /* Always large DMA fifo + ultra3 */
627 np->sv_scntl4 = INB(np, nc_scntl4);
628 np->sv_ctest5 = INB(np, nc_ctest5) & 0x04;
631 np->sv_ctest5 = INB(np, nc_ctest5) & 0x24;
636 * - LVD capable chips (895/895A/896/1010) report the current BUS mode
637 * through the STEST4 IO register.
638 * - For previous generation chips (825/825A/875), the user has to tell us
639 * how to check against HVD, since a 100% safe algorithm is not possible.
641 static void sym_set_bus_mode(struct sym_hcb *np, struct sym_nvram *nvram)
646 np->scsi_mode = SMODE_SE;
647 if (np->features & (FE_ULTRA2|FE_ULTRA3))
648 np->scsi_mode = (np->sv_stest4 & SMODE);
649 else if (np->features & FE_DIFF) {
650 if (SYM_SETUP_SCSI_DIFF == 1) {
652 if (np->sv_stest2 & 0x20)
653 np->scsi_mode = SMODE_HVD;
654 } else if (nvram->type == SYM_SYMBIOS_NVRAM) {
655 if (!(INB(np, nc_gpreg) & 0x08))
656 np->scsi_mode = SMODE_HVD;
658 } else if (SYM_SETUP_SCSI_DIFF == 2)
659 np->scsi_mode = SMODE_HVD;
661 if (np->scsi_mode == SMODE_HVD)
662 np->rv_stest2 |= 0x20;
666 * Prepare io register values used by sym_start_up()
667 * according to selected and supported features.
669 static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram)
671 struct sym_data *sym_data = shost_priv(shost);
672 struct pci_dev *pdev = sym_data->pdev;
677 np->maxwide = (np->features & FE_WIDE) ? 1 : 0;
680 * Guess the frequency of the chip's clock.
682 if (np->features & (FE_ULTRA3 | FE_ULTRA2))
683 np->clock_khz = 160000;
684 else if (np->features & FE_ULTRA)
685 np->clock_khz = 80000;
687 np->clock_khz = 40000;
690 * Get the clock multiplier factor.
692 if (np->features & FE_QUAD)
694 else if (np->features & FE_DBLR)
700 * Measure SCSI clock frequency for chips
701 * it may vary from assumed one.
703 if (np->features & FE_VARCLK)
704 sym_getclock(np, np->multiplier);
707 * Divisor to be used for async (timer pre-scaler).
709 i = np->clock_divn - 1;
711 if (10ul * SYM_CONF_MIN_ASYNC * np->clock_khz > div_10M[i]) {
719 * The C1010 uses hardwired divisors for async.
720 * So, we just throw away, the async. divisor.:-)
722 if (np->features & FE_C10)
726 * Minimum synchronous period factor supported by the chip.
727 * Btw, 'period' is in tenths of nanoseconds.
729 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
731 if (period <= 250) np->minsync = 10;
732 else if (period <= 303) np->minsync = 11;
733 else if (period <= 500) np->minsync = 12;
734 else np->minsync = (period + 40 - 1) / 40;
737 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
739 if (np->minsync < 25 &&
740 !(np->features & (FE_ULTRA|FE_ULTRA2|FE_ULTRA3)))
742 else if (np->minsync < 12 &&
743 !(np->features & (FE_ULTRA2|FE_ULTRA3)))
747 * Maximum synchronous period factor supported by the chip.
749 period = div64_ul(11 * div_10M[np->clock_divn - 1], 4 * np->clock_khz);
750 np->maxsync = period > 2540 ? 254 : period / 10;
753 * If chip is a C1010, guess the sync limits in DT mode.
755 if ((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) {
756 if (np->clock_khz == 160000) {
759 np->maxoffs_dt = nvram->type ? 62 : 31;
764 * 64 bit addressing (895A/896/1010) ?
766 if (np->features & FE_DAC) {
768 np->rv_ccntl1 |= (DDAC);
769 else if (SYM_CONF_DMA_ADDRESSING_MODE == 1)
770 np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
771 else if (SYM_CONF_DMA_ADDRESSING_MODE == 2)
772 np->rv_ccntl1 |= (0 | EXTIBMV);
776 * Phase mismatch handled by SCRIPTS (895A/896/1010) ?
778 if (np->features & FE_NOPM)
779 np->rv_ccntl0 |= (ENPMJ);
782 * C1010-33 Errata: Part Number:609-039638 (rev. 1) is fixed.
783 * In dual channel mode, contention occurs if internal cycles
784 * are used. Disable internal cycles.
786 if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
787 pdev->revision < 0x1)
788 np->rv_ccntl0 |= DILS;
791 * Select burst length (dwords)
793 burst_max = SYM_SETUP_BURST_ORDER;
794 if (burst_max == 255)
795 burst_max = burst_code(np->sv_dmode, np->sv_ctest4,
799 if (burst_max > np->maxburst)
800 burst_max = np->maxburst;
803 * DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2.
804 * This chip and the 860 Rev 1 may wrongly use PCI cache line
805 * based transactions on LOAD/STORE instructions. So we have
806 * to prevent these chips from using such PCI transactions in
807 * this driver. The generic ncr driver that does not use
808 * LOAD/STORE instructions does not need this work-around.
810 if ((pdev->device == PCI_DEVICE_ID_NCR_53C810 &&
811 pdev->revision >= 0x10 && pdev->revision <= 0x11) ||
812 (pdev->device == PCI_DEVICE_ID_NCR_53C860 &&
813 pdev->revision <= 0x1))
814 np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
817 * Select all supported special features.
818 * If we are using on-board RAM for scripts, prefetch (PFEN)
819 * does not help, but burst op fetch (BOF) does.
820 * Disabling PFEN makes sure BOF will be used.
822 if (np->features & FE_ERL)
823 np->rv_dmode |= ERL; /* Enable Read Line */
824 if (np->features & FE_BOF)
825 np->rv_dmode |= BOF; /* Burst Opcode Fetch */
826 if (np->features & FE_ERMP)
827 np->rv_dmode |= ERMP; /* Enable Read Multiple */
829 if ((np->features & FE_PFEN) && !np->ram_ba)
831 if (np->features & FE_PFEN)
833 np->rv_dcntl |= PFEN; /* Prefetch Enable */
834 if (np->features & FE_CLSE)
835 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */
836 if (np->features & FE_WRIE)
837 np->rv_ctest3 |= WRIE; /* Write and Invalidate */
838 if (np->features & FE_DFS)
839 np->rv_ctest5 |= DFS; /* Dma Fifo Size */
844 np->rv_ctest4 |= MPEE; /* Master parity checking */
845 np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */
848 * Get parity checking, host ID and verbose mode from NVRAM
852 sym_nvram_setup_host(shost, np, nvram);
855 * Get SCSI addr of host adapter (set by bios?).
857 if (np->myaddr == 255) {
858 np->myaddr = INB(np, nc_scid) & 0x07;
860 np->myaddr = SYM_SETUP_HOST_ID;
864 * Prepare initial io register bits for burst length
866 sym_init_burst(np, burst_max);
868 sym_set_bus_mode(np, nvram);
871 * Set LED support from SCRIPTS.
872 * Ignore this feature for boards known to use a
873 * specific GPIO wiring and for the 895A, 896
874 * and 1010 that drive the LED directly.
876 if ((SYM_SETUP_SCSI_LED ||
877 (nvram->type == SYM_SYMBIOS_NVRAM ||
878 (nvram->type == SYM_TEKRAM_NVRAM &&
879 pdev->device == PCI_DEVICE_ID_NCR_53C895))) &&
880 !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
881 np->features |= FE_LED0;
886 switch(SYM_SETUP_IRQ_MODE & 3) {
888 np->rv_dcntl |= IRQM;
891 np->rv_dcntl |= (np->sv_dcntl & IRQM);
898 * Configure targets according to driver setup.
899 * If NVRAM present get targets setup from NVRAM.
901 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
902 struct sym_tcb *tp = &np->target[i];
904 tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
905 tp->usrtags = SYM_SETUP_MAX_TAG;
906 tp->usr_width = np->maxwide;
909 sym_nvram_setup_target(tp, i, nvram);
912 tp->usrflags &= ~SYM_TAGS_ENABLED;
916 * Let user know about the settings.
918 printf("%s: %s, ID %d, Fast-%d, %s, %s\n", sym_name(np),
919 sym_nvram_type(nvram), np->myaddr,
920 (np->features & FE_ULTRA3) ? 80 :
921 (np->features & FE_ULTRA2) ? 40 :
922 (np->features & FE_ULTRA) ? 20 : 10,
923 sym_scsi_bus_mode(np->scsi_mode),
924 (np->rv_scntl0 & 0xa) ? "parity checking" : "NO parity");
926 * Tell him more on demand.
929 printf("%s: %s IRQ line driver%s\n",
931 np->rv_dcntl & IRQM ? "totem pole" : "open drain",
932 np->ram_ba ? ", using on-chip SRAM" : "");
933 printf("%s: using %s firmware.\n", sym_name(np), np->fw_name);
934 if (np->features & FE_NOPM)
935 printf("%s: handling phase mismatch from SCRIPTS.\n",
941 if (sym_verbose >= 2) {
942 printf ("%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
943 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
944 sym_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl,
945 np->sv_ctest3, np->sv_ctest4, np->sv_ctest5);
947 printf ("%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
948 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
949 sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
950 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
957 * Test the pci bus snoop logic :-(
959 * Has to be called with interrupts disabled.
961 #ifdef CONFIG_SCSI_SYM53C8XX_MMIO
962 static int sym_regtest(struct sym_hcb *np)
964 register volatile u32 data;
966 * chip registers may NOT be cached.
967 * write 0xffffffff to a read only register area,
968 * and try to read it back.
971 OUTL(np, nc_dstat, data);
972 data = INL(np, nc_dstat);
974 if (data == 0xffffffff) {
976 if ((data & 0xe2f0fffd) != 0x02000080) {
978 printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
985 static inline int sym_regtest(struct sym_hcb *np)
991 static int sym_snooptest(struct sym_hcb *np)
993 u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat;
996 err = sym_regtest(np);
1001 * Enable Master Parity Checking as we intend
1002 * to enable it for normal operations.
1004 OUTB(np, nc_ctest4, (np->rv_ctest4 & MPEE));
1008 pc = SCRIPTZ_BA(np, snooptest);
1012 * Set memory and register.
1014 np->scratch = cpu_to_scr(host_wr);
1015 OUTL(np, nc_temp, sym_wr);
1017 * Start script (exchange values)
1019 OUTL(np, nc_dsa, np->hcb_ba);
1022 * Wait 'til done (with timeout)
1024 for (i=0; i<SYM_SNOOP_TIMEOUT; i++)
1025 if (INB(np, nc_istat) & (INTF|SIP|DIP))
1027 if (i>=SYM_SNOOP_TIMEOUT) {
1028 printf ("CACHE TEST FAILED: timeout.\n");
1032 * Check for fatal DMA errors.
1034 dstat = INB(np, nc_dstat);
1035 #if 1 /* Band aiding for broken hardwares that fail PCI parity */
1036 if ((dstat & MDPE) && (np->rv_ctest4 & MPEE)) {
1037 printf ("%s: PCI DATA PARITY ERROR DETECTED - "
1038 "DISABLING MASTER DATA PARITY CHECKING.\n",
1040 np->rv_ctest4 &= ~MPEE;
1044 if (dstat & (MDPE|BF|IID)) {
1045 printf ("CACHE TEST FAILED: DMA error (dstat=0x%02x).", dstat);
1049 * Save termination position.
1051 pc = INL(np, nc_dsp);
1053 * Read memory and register.
1055 host_rd = scr_to_cpu(np->scratch);
1056 sym_rd = INL(np, nc_scratcha);
1057 sym_bk = INL(np, nc_temp);
1059 * Check termination position.
1061 if (pc != SCRIPTZ_BA(np, snoopend)+8) {
1062 printf ("CACHE TEST FAILED: script execution failed.\n");
1063 printf ("start=%08lx, pc=%08lx, end=%08lx\n",
1064 (u_long) SCRIPTZ_BA(np, snooptest), (u_long) pc,
1065 (u_long) SCRIPTZ_BA(np, snoopend) +8);
1071 if (host_wr != sym_rd) {
1072 printf ("CACHE TEST FAILED: host wrote %d, chip read %d.\n",
1073 (int) host_wr, (int) sym_rd);
1076 if (host_rd != sym_wr) {
1077 printf ("CACHE TEST FAILED: chip wrote %d, host read %d.\n",
1078 (int) sym_wr, (int) host_rd);
1081 if (sym_bk != sym_wr) {
1082 printf ("CACHE TEST FAILED: chip wrote %d, read back %d.\n",
1083 (int) sym_wr, (int) sym_bk);
1091 * log message for real hard errors
1093 * sym0 targ 0?: ERROR (ds:si) (so-si-sd) (sx/s3/s4) @ name (dsp:dbc).
1094 * reg: r0 r1 r2 r3 r4 r5 r6 ..... rf.
1096 * exception register:
1101 * so: control lines as driven by chip.
1102 * si: control lines as seen by chip.
1103 * sd: scsi data lines as seen by chip.
1106 * sx: sxfer (see the manual)
1107 * s3: scntl3 (see the manual)
1108 * s4: scntl4 (see the manual)
1110 * current script command:
1111 * dsp: script address (relative to start of script).
1112 * dbc: first word of script command.
1114 * First 24 register of the chip:
1117 static void sym_log_hard_error(struct Scsi_Host *shost, u_short sist, u_char dstat)
1119 struct sym_hcb *np = sym_get_hcb(shost);
1124 u_char *script_base;
1127 dsp = INL(np, nc_dsp);
1129 if (dsp > np->scripta_ba &&
1130 dsp <= np->scripta_ba + np->scripta_sz) {
1131 script_ofs = dsp - np->scripta_ba;
1132 script_size = np->scripta_sz;
1133 script_base = (u_char *) np->scripta0;
1134 script_name = "scripta";
1136 else if (np->scriptb_ba < dsp &&
1137 dsp <= np->scriptb_ba + np->scriptb_sz) {
1138 script_ofs = dsp - np->scriptb_ba;
1139 script_size = np->scriptb_sz;
1140 script_base = (u_char *) np->scriptb0;
1141 script_name = "scriptb";
1146 script_name = "mem";
1149 printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x/%x) @ (%s %x:%08x).\n",
1150 sym_name(np), (unsigned)INB(np, nc_sdid)&0x0f, dstat, sist,
1151 (unsigned)INB(np, nc_socl), (unsigned)INB(np, nc_sbcl),
1152 (unsigned)INB(np, nc_sbdl), (unsigned)INB(np, nc_sxfer),
1153 (unsigned)INB(np, nc_scntl3),
1154 (np->features & FE_C10) ? (unsigned)INB(np, nc_scntl4) : 0,
1155 script_name, script_ofs, (unsigned)INL(np, nc_dbc));
1157 if (((script_ofs & 3) == 0) &&
1158 (unsigned)script_ofs < script_size) {
1159 printf ("%s: script cmd = %08x\n", sym_name(np),
1160 scr_to_cpu((int) *(u32 *)(script_base + script_ofs)));
1163 printf("%s: regdump:", sym_name(np));
1164 for (i = 0; i < 24; i++)
1165 printf(" %02x", (unsigned)INB_OFF(np, i));
1171 if (dstat & (MDPE|BF))
1172 sym_log_bus_error(shost);
1175 void sym_dump_registers(struct Scsi_Host *shost)
1177 struct sym_hcb *np = sym_get_hcb(shost);
1181 sist = INW(np, nc_sist);
1182 dstat = INB(np, nc_dstat);
1183 sym_log_hard_error(shost, sist, dstat);
1186 static struct sym_chip sym_dev_table[] = {
1187 {PCI_DEVICE_ID_NCR_53C810, 0x0f, "810", 4, 8, 4, 64,
1190 #ifdef SYM_DEBUG_GENERIC_SUPPORT
1191 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4, 8, 4, 1,
1195 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4, 8, 4, 1,
1196 FE_CACHE_SET|FE_LDSTR|FE_PFEN|FE_BOF}
1199 {PCI_DEVICE_ID_NCR_53C815, 0xff, "815", 4, 8, 4, 64,
1202 {PCI_DEVICE_ID_NCR_53C825, 0x0f, "825", 6, 8, 4, 64,
1203 FE_WIDE|FE_BOF|FE_ERL|FE_DIFF}
1205 {PCI_DEVICE_ID_NCR_53C825, 0xff, "825a", 6, 8, 4, 2,
1206 FE_WIDE|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM|FE_DIFF}
1208 {PCI_DEVICE_ID_NCR_53C860, 0xff, "860", 4, 8, 5, 1,
1209 FE_ULTRA|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN}
1211 {PCI_DEVICE_ID_NCR_53C875, 0x01, "875", 6, 16, 5, 2,
1212 FE_WIDE|FE_ULTRA|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1213 FE_RAM|FE_DIFF|FE_VARCLK}
1215 {PCI_DEVICE_ID_NCR_53C875, 0xff, "875", 6, 16, 5, 2,
1216 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1217 FE_RAM|FE_DIFF|FE_VARCLK}
1219 {PCI_DEVICE_ID_NCR_53C875J, 0xff, "875J", 6, 16, 5, 2,
1220 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1221 FE_RAM|FE_DIFF|FE_VARCLK}
1223 {PCI_DEVICE_ID_NCR_53C885, 0xff, "885", 6, 16, 5, 2,
1224 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1225 FE_RAM|FE_DIFF|FE_VARCLK}
1227 #ifdef SYM_DEBUG_GENERIC_SUPPORT
1228 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1229 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|
1233 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1234 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1238 {PCI_DEVICE_ID_NCR_53C896, 0xff, "896", 6, 31, 7, 4,
1239 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1240 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1242 {PCI_DEVICE_ID_LSI_53C895A, 0xff, "895a", 6, 31, 7, 4,
1243 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1244 FE_RAM|FE_RAM8K|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1246 {PCI_DEVICE_ID_LSI_53C875A, 0xff, "875a", 6, 31, 7, 4,
1247 FE_WIDE|FE_ULTRA|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1248 FE_RAM|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1250 {PCI_DEVICE_ID_LSI_53C1010_33, 0x00, "1010-33", 6, 31, 7, 8,
1251 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1252 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1255 {PCI_DEVICE_ID_LSI_53C1010_33, 0xff, "1010-33", 6, 31, 7, 8,
1256 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1257 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1260 {PCI_DEVICE_ID_LSI_53C1010_66, 0xff, "1010-66", 6, 31, 7, 8,
1261 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1262 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_66MHZ|FE_CRC|
1265 {PCI_DEVICE_ID_LSI_53C1510, 0xff, "1510d", 6, 31, 7, 4,
1266 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1267 FE_RAM|FE_IO256|FE_LEDC}
1270 #define sym_num_devs (ARRAY_SIZE(sym_dev_table))
1273 * Look up the chip table.
1275 * Return a pointer to the chip entry if found,
1279 sym_lookup_chip_table (u_short device_id, u_char revision)
1281 struct sym_chip *chip;
1284 for (i = 0; i < sym_num_devs; i++) {
1285 chip = &sym_dev_table[i];
1286 if (device_id != chip->device_id)
1288 if (revision > chip->revision_id)
1296 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1298 * Lookup the 64 bit DMA segments map.
1299 * This is only used if the direct mapping
1300 * has been unsuccessful.
1302 int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s)
1309 /* Look up existing mappings */
1310 for (i = SYM_DMAP_SIZE-1; i > 0; i--) {
1311 if (h == np->dmap_bah[i])
1314 /* If direct mapping is free, get it */
1315 if (!np->dmap_bah[s])
1317 /* Collision -> lookup free mappings */
1318 for (s = SYM_DMAP_SIZE-1; s > 0; s--) {
1319 if (!np->dmap_bah[s])
1323 panic("sym: ran out of 64 bit DMA segment registers");
1326 np->dmap_bah[s] = h;
1332 * Update IO registers scratch C..R so they will be
1333 * in sync. with queued CCB expectations.
1335 static void sym_update_dmap_regs(struct sym_hcb *np)
1339 if (!np->dmap_dirty)
1341 o = offsetof(struct sym_reg, nc_scrx[0]);
1342 for (i = 0; i < SYM_DMAP_SIZE; i++) {
1343 OUTL_OFF(np, o, np->dmap_bah[i]);
1350 /* Enforce all the fiddly SPI rules and the chip limitations */
1351 static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
1352 struct sym_trans *goal)
1354 if (!spi_support_wide(starget))
1357 if (!spi_support_sync(starget)) {
1365 if (spi_support_dt(starget)) {
1366 if (spi_support_dt_only(starget))
1369 if (goal->offset == 0)
1375 /* Some targets fail to properly negotiate DT in SE mode */
1376 if ((np->scsi_mode != SMODE_LVD) || !(np->features & FE_U3EN))
1380 /* all DT transfers must be wide */
1382 if (goal->offset > np->maxoffs_dt)
1383 goal->offset = np->maxoffs_dt;
1384 if (goal->period < np->minsync_dt)
1385 goal->period = np->minsync_dt;
1386 if (goal->period > np->maxsync_dt)
1387 goal->period = np->maxsync_dt;
1389 goal->iu = goal->qas = 0;
1390 if (goal->offset > np->maxoffs)
1391 goal->offset = np->maxoffs;
1392 if (goal->period < np->minsync)
1393 goal->period = np->minsync;
1394 if (goal->period > np->maxsync)
1395 goal->period = np->maxsync;
1400 * Prepare the next negotiation message if needed.
1402 * Fill in the part of message buffer that contains the
1403 * negotiation and the nego_status field of the CCB.
1404 * Returns the size of the message in bytes.
1406 static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgptr)
1408 struct sym_tcb *tp = &np->target[cp->target];
1409 struct scsi_target *starget = tp->starget;
1410 struct sym_trans *goal = &tp->tgoal;
1414 sym_check_goals(np, starget, goal);
1417 * Many devices implement PPR in a buggy way, so only use it if we
1420 if (goal->renego == NS_PPR || (goal->offset &&
1421 (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)))) {
1423 } else if (goal->renego == NS_WIDE || goal->width) {
1425 } else if (goal->renego == NS_SYNC || goal->offset) {
1428 goal->check_nego = 0;
1434 msglen += spi_populate_sync_msg(msgptr + msglen, goal->period,
1438 msglen += spi_populate_width_msg(msgptr + msglen, goal->width);
1441 msglen += spi_populate_ppr_msg(msgptr + msglen, goal->period,
1442 goal->offset, goal->width,
1443 (goal->iu ? PPR_OPT_IU : 0) |
1444 (goal->dt ? PPR_OPT_DT : 0) |
1445 (goal->qas ? PPR_OPT_QAS : 0));
1449 cp->nego_status = nego;
1452 tp->nego_cp = cp; /* Keep track a nego will be performed */
1453 if (DEBUG_FLAGS & DEBUG_NEGO) {
1454 sym_print_nego_msg(np, cp->target,
1455 nego == NS_SYNC ? "sync msgout" :
1456 nego == NS_WIDE ? "wide msgout" :
1457 "ppr msgout", msgptr);
1465 * Insert a job into the start queue.
1467 void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp)
1471 #ifdef SYM_CONF_IARB_SUPPORT
1473 * If the previously queued CCB is not yet done,
1474 * set the IARB hint. The SCRIPTS will go with IARB
1475 * for this job when starting the previous one.
1476 * We leave devices a chance to win arbitration by
1477 * not using more than 'iarb_max' consecutive
1478 * immediate arbitrations.
1480 if (np->last_cp && np->iarb_count < np->iarb_max) {
1481 np->last_cp->host_flags |= HF_HINT_IARB;
1489 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1491 * Make SCRIPTS aware of the 64 bit DMA
1492 * segment registers not being up-to-date.
1495 cp->host_xflags |= HX_DMAP_DIRTY;
1499 * Insert first the idle task and then our job.
1500 * The MBs should ensure proper ordering.
1502 qidx = np->squeueput + 2;
1503 if (qidx >= MAX_QUEUE*2) qidx = 0;
1505 np->squeue [qidx] = cpu_to_scr(np->idletask_ba);
1506 MEMORY_WRITE_BARRIER();
1507 np->squeue [np->squeueput] = cpu_to_scr(cp->ccb_ba);
1509 np->squeueput = qidx;
1511 if (DEBUG_FLAGS & DEBUG_QUEUE)
1512 scmd_printk(KERN_DEBUG, cp->cmd, "queuepos=%d\n",
1516 * Script processor may be waiting for reselect.
1519 MEMORY_WRITE_BARRIER();
1520 OUTB(np, nc_istat, SIGP|np->istat_sem);
1523 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1525 * Start next ready-to-start CCBs.
1527 void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn)
1533 * Paranoia, as usual. :-)
1535 assert(!lp->started_tags || !lp->started_no_tag);
1538 * Try to start as many commands as asked by caller.
1539 * Prevent from having both tagged and untagged
1540 * commands queued to the device at the same time.
1543 qp = sym_remque_head(&lp->waiting_ccbq);
1546 cp = sym_que_entry(qp, struct sym_ccb, link2_ccbq);
1547 if (cp->tag != NO_TAG) {
1548 if (lp->started_no_tag ||
1549 lp->started_tags >= lp->started_max) {
1550 sym_insque_head(qp, &lp->waiting_ccbq);
1553 lp->itlq_tbl[cp->tag] = cpu_to_scr(cp->ccb_ba);
1555 cpu_to_scr(SCRIPTA_BA(np, resel_tag));
1558 if (lp->started_no_tag || lp->started_tags) {
1559 sym_insque_head(qp, &lp->waiting_ccbq);
1562 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
1564 cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
1565 ++lp->started_no_tag;
1568 sym_insque_tail(qp, &lp->started_ccbq);
1569 sym_put_start_queue(np, cp);
1572 #endif /* SYM_OPT_HANDLE_DEVICE_QUEUEING */
1575 * The chip may have completed jobs. Look at the DONE QUEUE.
1577 * On paper, memory read barriers may be needed here to
1578 * prevent out of order LOADs by the CPU from having
1579 * prefetched stale data prior to DMA having occurred.
1581 static int sym_wakeup_done (struct sym_hcb *np)
1590 /* MEMORY_READ_BARRIER(); */
1592 dsa = scr_to_cpu(np->dqueue[i]);
1596 if ((i = i+2) >= MAX_QUEUE*2)
1599 cp = sym_ccb_from_dsa(np, dsa);
1601 MEMORY_READ_BARRIER();
1602 sym_complete_ok (np, cp);
1606 printf ("%s: bad DSA (%x) in done queue.\n",
1607 sym_name(np), (u_int) dsa);
1615 * Complete all CCBs queued to the COMP queue.
1617 * These CCBs are assumed:
1618 * - Not to be referenced either by devices or
1619 * SCRIPTS-related queues and datas.
1620 * - To have to be completed with an error condition
1623 * The device queue freeze count is incremented
1624 * for each CCB that does not prevent this.
1625 * This function is called when all CCBs involved
1626 * in error handling/recovery have been reaped.
1628 static void sym_flush_comp_queue(struct sym_hcb *np, int cam_status)
1633 while ((qp = sym_remque_head(&np->comp_ccbq)) != NULL) {
1634 struct scsi_cmnd *cmd;
1635 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
1636 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
1637 /* Leave quiet CCBs waiting for resources */
1638 if (cp->host_status == HS_WAIT)
1642 sym_set_cam_status(cmd, cam_status);
1643 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1644 if (sym_get_cam_status(cmd) == DID_SOFT_ERROR) {
1645 struct sym_tcb *tp = &np->target[cp->target];
1646 struct sym_lcb *lp = sym_lp(tp, cp->lun);
1648 sym_remque(&cp->link2_ccbq);
1649 sym_insque_tail(&cp->link2_ccbq,
1652 if (cp->tag != NO_TAG)
1655 --lp->started_no_tag;
1662 sym_free_ccb(np, cp);
1663 sym_xpt_done(np, cmd);
1668 * Complete all active CCBs with error.
1669 * Used on CHIP/SCSI RESET.
1671 static void sym_flush_busy_queue (struct sym_hcb *np, int cam_status)
1674 * Move all active CCBs to the COMP queue
1675 * and flush this queue.
1677 sym_que_splice(&np->busy_ccbq, &np->comp_ccbq);
1678 sym_que_init(&np->busy_ccbq);
1679 sym_flush_comp_queue(np, cam_status);
1686 * 0: initialisation.
1687 * 1: SCSI BUS RESET delivered or received.
1688 * 2: SCSI BUS MODE changed.
1690 void sym_start_up(struct Scsi_Host *shost, int reason)
1692 struct sym_data *sym_data = shost_priv(shost);
1693 struct pci_dev *pdev = sym_data->pdev;
1694 struct sym_hcb *np = sym_data->ncb;
1699 * Reset chip if asked, otherwise just clear fifos.
1704 OUTB(np, nc_stest3, TE|CSF);
1705 OUTONB(np, nc_ctest3, CLF);
1711 phys = np->squeue_ba;
1712 for (i = 0; i < MAX_QUEUE*2; i += 2) {
1713 np->squeue[i] = cpu_to_scr(np->idletask_ba);
1714 np->squeue[i+1] = cpu_to_scr(phys + (i+2)*4);
1716 np->squeue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1719 * Start at first entry.
1726 phys = np->dqueue_ba;
1727 for (i = 0; i < MAX_QUEUE*2; i += 2) {
1729 np->dqueue[i+1] = cpu_to_scr(phys + (i+2)*4);
1731 np->dqueue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1734 * Start at first entry.
1739 * Install patches in scripts.
1740 * This also let point to first position the start
1741 * and done queue pointers used from SCRIPTS.
1743 np->fw_patch(shost);
1746 * Wakeup all pending jobs.
1748 sym_flush_busy_queue(np, DID_RESET);
1753 OUTB(np, nc_istat, 0x00); /* Remove Reset, abort */
1755 udelay(2000); /* The 895 needs time for the bus mode to settle */
1757 OUTB(np, nc_scntl0, np->rv_scntl0 | 0xc0);
1758 /* full arb., ena parity, par->ATN */
1759 OUTB(np, nc_scntl1, 0x00); /* odd parity, and remove CRST!! */
1761 sym_selectclock(np, np->rv_scntl3); /* Select SCSI clock */
1763 OUTB(np, nc_scid , RRE|np->myaddr); /* Adapter SCSI address */
1764 OUTW(np, nc_respid, 1ul<<np->myaddr); /* Id to respond to */
1765 OUTB(np, nc_istat , SIGP ); /* Signal Process */
1766 OUTB(np, nc_dmode , np->rv_dmode); /* Burst length, dma mode */
1767 OUTB(np, nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */
1769 OUTB(np, nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */
1770 OUTB(np, nc_ctest3, np->rv_ctest3); /* Write and invalidate */
1771 OUTB(np, nc_ctest4, np->rv_ctest4); /* Master parity checking */
1773 /* Extended Sreq/Sack filtering not supported on the C10 */
1774 if (np->features & FE_C10)
1775 OUTB(np, nc_stest2, np->rv_stest2);
1777 OUTB(np, nc_stest2, EXT|np->rv_stest2);
1779 OUTB(np, nc_stest3, TE); /* TolerANT enable */
1780 OUTB(np, nc_stime0, 0x0c); /* HTH disabled STO 0.25 sec */
1783 * For now, disable AIP generation on C1010-66.
1785 if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_66)
1786 OUTB(np, nc_aipcntl1, DISAIP);
1789 * C10101 rev. 0 errata.
1790 * Errant SGE's when in narrow. Write bits 4 & 5 of
1791 * STEST1 register to disable SGE. We probably should do
1792 * that from SCRIPTS for each selection/reselection, but
1793 * I just don't want. :)
1795 if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
1797 OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
1800 * DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2.
1801 * Disable overlapped arbitration for some dual function devices,
1802 * regardless revision id (kind of post-chip-design feature. ;-))
1804 if (pdev->device == PCI_DEVICE_ID_NCR_53C875)
1805 OUTB(np, nc_ctest0, (1<<5));
1806 else if (pdev->device == PCI_DEVICE_ID_NCR_53C896)
1807 np->rv_ccntl0 |= DPR;
1810 * Write CCNTL0/CCNTL1 for chips capable of 64 bit addressing
1811 * and/or hardware phase mismatch, since only such chips
1812 * seem to support those IO registers.
1814 if (np->features & (FE_DAC|FE_NOPM)) {
1815 OUTB(np, nc_ccntl0, np->rv_ccntl0);
1816 OUTB(np, nc_ccntl1, np->rv_ccntl1);
1819 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1821 * Set up scratch C and DRS IO registers to map the 32 bit
1822 * DMA address range our data structures are located in.
1825 np->dmap_bah[0] = 0; /* ??? */
1826 OUTL(np, nc_scrx[0], np->dmap_bah[0]);
1827 OUTL(np, nc_drs, np->dmap_bah[0]);
1832 * If phase mismatch handled by scripts (895A/896/1010),
1833 * set PM jump addresses.
1835 if (np->features & FE_NOPM) {
1836 OUTL(np, nc_pmjad1, SCRIPTB_BA(np, pm_handle));
1837 OUTL(np, nc_pmjad2, SCRIPTB_BA(np, pm_handle));
1841 * Enable GPIO0 pin for writing if LED support from SCRIPTS.
1842 * Also set GPIO5 and clear GPIO6 if hardware LED control.
1844 if (np->features & FE_LED0)
1845 OUTB(np, nc_gpcntl, INB(np, nc_gpcntl) & ~0x01);
1846 else if (np->features & FE_LEDC)
1847 OUTB(np, nc_gpcntl, (INB(np, nc_gpcntl) & ~0x41) | 0x20);
1852 OUTW(np, nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR);
1853 OUTB(np, nc_dien , MDPE|BF|SSI|SIR|IID);
1856 * For 895/6 enable SBMC interrupt and save current SCSI bus mode.
1857 * Try to eat the spurious SBMC interrupt that may occur when
1858 * we reset the chip but not the SCSI BUS (at initialization).
1860 if (np->features & (FE_ULTRA2|FE_ULTRA3)) {
1861 OUTONW(np, nc_sien, SBMC);
1867 np->scsi_mode = INB(np, nc_stest4) & SMODE;
1871 * Fill in target structure.
1872 * Reinitialize usrsync.
1873 * Reinitialize usrwide.
1874 * Prepare sync negotiation according to actual SCSI bus mode.
1876 for (i=0;i<SYM_CONF_MAX_TARGET;i++) {
1877 struct sym_tcb *tp = &np->target[i];
1881 tp->head.wval = np->rv_scntl3;
1884 tp->lun0p->to_clear = 0;
1888 for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
1890 tp->lunmp[ln]->to_clear = 0;
1895 * Download SCSI SCRIPTS to on-chip RAM if present,
1896 * and start script processor.
1897 * We do the download preferently from the CPU.
1898 * For platforms that may not support PCI memory mapping,
1899 * we use simple SCRIPTS that performs MEMORY MOVEs.
1901 phys = SCRIPTA_BA(np, init);
1903 if (sym_verbose >= 2)
1904 printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np));
1905 memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz);
1906 if (np->features & FE_RAM8K) {
1907 memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz);
1908 phys = scr_to_cpu(np->scr_ram_seg);
1909 OUTL(np, nc_mmws, phys);
1910 OUTL(np, nc_mmrs, phys);
1911 OUTL(np, nc_sfs, phys);
1912 phys = SCRIPTB_BA(np, start64);
1918 OUTL(np, nc_dsa, np->hcb_ba);
1922 * Notify the XPT about the RESET condition.
1925 sym_xpt_async_bus_reset(np);
1929 * Switch trans mode for current job and its target.
1931 static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs,
1932 u_char per, u_char wide, u_char div, u_char fak)
1935 u_char sval, wval, uval;
1936 struct sym_tcb *tp = &np->target[target];
1938 assert(target == (INB(np, nc_sdid) & 0x0f));
1940 sval = tp->head.sval;
1941 wval = tp->head.wval;
1942 uval = tp->head.uval;
1945 printf("XXXX sval=%x wval=%x uval=%x (%x)\n",
1946 sval, wval, uval, np->rv_scntl3);
1951 if (!(np->features & FE_C10))
1952 sval = (sval & ~0x1f) | ofs;
1954 sval = (sval & ~0x3f) | ofs;
1957 * Set the sync divisor and extra clock factor.
1960 wval = (wval & ~0x70) | ((div+1) << 4);
1961 if (!(np->features & FE_C10))
1962 sval = (sval & ~0xe0) | (fak << 5);
1964 uval = uval & ~(XCLKH_ST|XCLKH_DT|XCLKS_ST|XCLKS_DT);
1965 if (fak >= 1) uval |= (XCLKH_ST|XCLKH_DT);
1966 if (fak >= 2) uval |= (XCLKS_ST|XCLKS_DT);
1971 * Set the bus width.
1978 * Set misc. ultra enable bits.
1980 if (np->features & FE_C10) {
1981 uval = uval & ~(U3EN|AIPCKEN);
1983 assert(np->features & FE_U3EN);
1987 wval = wval & ~ULTRA;
1988 if (per <= 12) wval |= ULTRA;
1992 * Stop there if sync parameters are unchanged.
1994 if (tp->head.sval == sval &&
1995 tp->head.wval == wval &&
1996 tp->head.uval == uval)
1998 tp->head.sval = sval;
1999 tp->head.wval = wval;
2000 tp->head.uval = uval;
2003 * Disable extended Sreq/Sack filtering if per < 50.
2004 * Not supported on the C1010.
2006 if (per < 50 && !(np->features & FE_C10))
2007 OUTOFFB(np, nc_stest2, EXT);
2010 * set actual value and sync_status
2012 OUTB(np, nc_sxfer, tp->head.sval);
2013 OUTB(np, nc_scntl3, tp->head.wval);
2015 if (np->features & FE_C10) {
2016 OUTB(np, nc_scntl4, tp->head.uval);
2020 * patch ALL busy ccbs of this target.
2022 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
2024 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
2025 if (cp->target != target)
2027 cp->phys.select.sel_scntl3 = tp->head.wval;
2028 cp->phys.select.sel_sxfer = tp->head.sval;
2029 if (np->features & FE_C10) {
2030 cp->phys.select.sel_scntl4 = tp->head.uval;
2035 static void sym_announce_transfer_rate(struct sym_tcb *tp)
2037 struct scsi_target *starget = tp->starget;
2039 if (tp->tprint.period != spi_period(starget) ||
2040 tp->tprint.offset != spi_offset(starget) ||
2041 tp->tprint.width != spi_width(starget) ||
2042 tp->tprint.iu != spi_iu(starget) ||
2043 tp->tprint.dt != spi_dt(starget) ||
2044 tp->tprint.qas != spi_qas(starget) ||
2045 !tp->tprint.check_nego) {
2046 tp->tprint.period = spi_period(starget);
2047 tp->tprint.offset = spi_offset(starget);
2048 tp->tprint.width = spi_width(starget);
2049 tp->tprint.iu = spi_iu(starget);
2050 tp->tprint.dt = spi_dt(starget);
2051 tp->tprint.qas = spi_qas(starget);
2052 tp->tprint.check_nego = 1;
2054 spi_display_xfer_agreement(starget);
2059 * We received a WDTR.
2060 * Let everything be aware of the changes.
2062 static void sym_setwide(struct sym_hcb *np, int target, u_char wide)
2064 struct sym_tcb *tp = &np->target[target];
2065 struct scsi_target *starget = tp->starget;
2067 sym_settrans(np, target, 0, 0, 0, wide, 0, 0);
2070 tp->tgoal.renego = NS_WIDE;
2072 tp->tgoal.renego = 0;
2073 tp->tgoal.check_nego = 0;
2074 tp->tgoal.width = wide;
2075 spi_offset(starget) = 0;
2076 spi_period(starget) = 0;
2077 spi_width(starget) = wide;
2078 spi_iu(starget) = 0;
2079 spi_dt(starget) = 0;
2080 spi_qas(starget) = 0;
2082 if (sym_verbose >= 3)
2083 sym_announce_transfer_rate(tp);
2087 * We received a SDTR.
2088 * Let everything be aware of the changes.
2091 sym_setsync(struct sym_hcb *np, int target,
2092 u_char ofs, u_char per, u_char div, u_char fak)
2094 struct sym_tcb *tp = &np->target[target];
2095 struct scsi_target *starget = tp->starget;
2096 u_char wide = (tp->head.wval & EWS) ? BUS_16_BIT : BUS_8_BIT;
2098 sym_settrans(np, target, 0, ofs, per, wide, div, fak);
2101 tp->tgoal.renego = NS_WIDE;
2103 tp->tgoal.renego = NS_SYNC;
2105 tp->tgoal.renego = 0;
2106 spi_period(starget) = per;
2107 spi_offset(starget) = ofs;
2108 spi_iu(starget) = spi_dt(starget) = spi_qas(starget) = 0;
2110 if (!tp->tgoal.dt && !tp->tgoal.iu && !tp->tgoal.qas) {
2111 tp->tgoal.period = per;
2112 tp->tgoal.offset = ofs;
2113 tp->tgoal.check_nego = 0;
2116 sym_announce_transfer_rate(tp);
2120 * We received a PPR.
2121 * Let everything be aware of the changes.
2124 sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs,
2125 u_char per, u_char wide, u_char div, u_char fak)
2127 struct sym_tcb *tp = &np->target[target];
2128 struct scsi_target *starget = tp->starget;
2130 sym_settrans(np, target, opts, ofs, per, wide, div, fak);
2133 tp->tgoal.renego = NS_PPR;
2135 tp->tgoal.renego = 0;
2136 spi_width(starget) = tp->tgoal.width = wide;
2137 spi_period(starget) = tp->tgoal.period = per;
2138 spi_offset(starget) = tp->tgoal.offset = ofs;
2139 spi_iu(starget) = tp->tgoal.iu = !!(opts & PPR_OPT_IU);
2140 spi_dt(starget) = tp->tgoal.dt = !!(opts & PPR_OPT_DT);
2141 spi_qas(starget) = tp->tgoal.qas = !!(opts & PPR_OPT_QAS);
2142 tp->tgoal.check_nego = 0;
2144 sym_announce_transfer_rate(tp);
2148 * generic recovery from scsi interrupt
2150 * The doc says that when the chip gets an SCSI interrupt,
2151 * it tries to stop in an orderly fashion, by completing
2152 * an instruction fetch that had started or by flushing
2153 * the DMA fifo for a write to memory that was executing.
2154 * Such a fashion is not enough to know if the instruction
2155 * that was just before the current DSP value has been
2158 * There are some small SCRIPTS sections that deal with
2159 * the start queue and the done queue that may break any
2160 * assomption from the C code if we are interrupted
2161 * inside, so we reset if this happens. Btw, since these
2162 * SCRIPTS sections are executed while the SCRIPTS hasn't
2163 * started SCSI operations, it is very unlikely to happen.
2165 * All the driver data structures are supposed to be
2166 * allocated from the same 4 GB memory window, so there
2167 * is a 1 to 1 relationship between DSA and driver data
2168 * structures. Since we are careful :) to invalidate the
2169 * DSA when we complete a command or when the SCRIPTS
2170 * pushes a DSA into a queue, we can trust it when it
2173 static void sym_recover_scsi_int (struct sym_hcb *np, u_char hsts)
2175 u32 dsp = INL(np, nc_dsp);
2176 u32 dsa = INL(np, nc_dsa);
2177 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
2180 * If we haven't been interrupted inside the SCRIPTS
2181 * critical pathes, we can safely restart the SCRIPTS
2182 * and trust the DSA value if it matches a CCB.
2184 if ((!(dsp > SCRIPTA_BA(np, getjob_begin) &&
2185 dsp < SCRIPTA_BA(np, getjob_end) + 1)) &&
2186 (!(dsp > SCRIPTA_BA(np, ungetjob) &&
2187 dsp < SCRIPTA_BA(np, reselect) + 1)) &&
2188 (!(dsp > SCRIPTB_BA(np, sel_for_abort) &&
2189 dsp < SCRIPTB_BA(np, sel_for_abort_1) + 1)) &&
2190 (!(dsp > SCRIPTA_BA(np, done) &&
2191 dsp < SCRIPTA_BA(np, done_end) + 1))) {
2192 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
2193 OUTB(np, nc_stest3, TE|CSF); /* clear scsi fifo */
2195 * If we have a CCB, let the SCRIPTS call us back for
2196 * the handling of the error with SCRATCHA filled with
2197 * STARTPOS. This way, we will be able to freeze the
2198 * device queue and requeue awaiting IOs.
2201 cp->host_status = hsts;
2202 OUTL_DSP(np, SCRIPTA_BA(np, complete_error));
2205 * Otherwise just restart the SCRIPTS.
2208 OUTL(np, nc_dsa, 0xffffff);
2209 OUTL_DSP(np, SCRIPTA_BA(np, start));
2218 sym_start_reset(np);
2222 * chip exception handler for selection timeout
2224 static void sym_int_sto (struct sym_hcb *np)
2226 u32 dsp = INL(np, nc_dsp);
2228 if (DEBUG_FLAGS & DEBUG_TINY) printf ("T");
2230 if (dsp == SCRIPTA_BA(np, wf_sel_done) + 8)
2231 sym_recover_scsi_int(np, HS_SEL_TIMEOUT);
2233 sym_start_reset(np);
2237 * chip exception handler for unexpected disconnect
2239 static void sym_int_udc (struct sym_hcb *np)
2241 printf ("%s: unexpected disconnect\n", sym_name(np));
2242 sym_recover_scsi_int(np, HS_UNEXPECTED);
2246 * chip exception handler for SCSI bus mode change
2248 * spi2-r12 11.2.3 says a transceiver mode change must
2249 * generate a reset event and a device that detects a reset
2250 * event shall initiate a hard reset. It says also that a
2251 * device that detects a mode change shall set data transfer
2252 * mode to eight bit asynchronous, etc...
2253 * So, just reinitializing all except chip should be enough.
2255 static void sym_int_sbmc(struct Scsi_Host *shost)
2257 struct sym_hcb *np = sym_get_hcb(shost);
2258 u_char scsi_mode = INB(np, nc_stest4) & SMODE;
2263 printf("%s: SCSI BUS mode change from %s to %s.\n", sym_name(np),
2264 sym_scsi_bus_mode(np->scsi_mode), sym_scsi_bus_mode(scsi_mode));
2267 * Should suspend command processing for a few seconds and
2268 * reinitialize all except the chip.
2270 sym_start_up(shost, 2);
2274 * chip exception handler for SCSI parity error.
2276 * When the chip detects a SCSI parity error and is
2277 * currently executing a (CH)MOV instruction, it does
2278 * not interrupt immediately, but tries to finish the
2279 * transfer of the current scatter entry before
2280 * interrupting. The following situations may occur:
2282 * - The complete scatter entry has been transferred
2283 * without the device having changed phase.
2284 * The chip will then interrupt with the DSP pointing
2285 * to the instruction that follows the MOV.
2287 * - A phase mismatch occurs before the MOV finished
2288 * and phase errors are to be handled by the C code.
2289 * The chip will then interrupt with both PAR and MA
2292 * - A phase mismatch occurs before the MOV finished and
2293 * phase errors are to be handled by SCRIPTS.
2294 * The chip will load the DSP with the phase mismatch
2295 * JUMP address and interrupt the host processor.
2297 static void sym_int_par (struct sym_hcb *np, u_short sist)
2299 u_char hsts = INB(np, HS_PRT);
2300 u32 dsp = INL(np, nc_dsp);
2301 u32 dbc = INL(np, nc_dbc);
2302 u32 dsa = INL(np, nc_dsa);
2303 u_char sbcl = INB(np, nc_sbcl);
2304 u_char cmd = dbc >> 24;
2305 int phase = cmd & 7;
2306 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
2308 if (printk_ratelimit())
2309 printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
2310 sym_name(np), hsts, dbc, sbcl);
2313 * Check that the chip is connected to the SCSI BUS.
2315 if (!(INB(np, nc_scntl1) & ISCON)) {
2316 sym_recover_scsi_int(np, HS_UNEXPECTED);
2321 * If the nexus is not clearly identified, reset the bus.
2322 * We will try to do better later.
2328 * Check instruction was a MOV, direction was INPUT and
2331 if ((cmd & 0xc0) || !(phase & 1) || !(sbcl & 0x8))
2335 * Keep track of the parity error.
2337 OUTONB(np, HF_PRT, HF_EXT_ERR);
2338 cp->xerr_status |= XE_PARITY_ERR;
2341 * Prepare the message to send to the device.
2343 np->msgout[0] = (phase == 7) ? M_PARITY : M_ID_ERROR;
2346 * If the old phase was DATA IN phase, we have to deal with
2347 * the 3 situations described above.
2348 * For other input phases (MSG IN and STATUS), the device
2349 * must resend the whole thing that failed parity checking
2350 * or signal error. So, jumping to dispatcher should be OK.
2352 if (phase == 1 || phase == 5) {
2353 /* Phase mismatch handled by SCRIPTS */
2354 if (dsp == SCRIPTB_BA(np, pm_handle))
2356 /* Phase mismatch handled by the C code */
2359 /* No phase mismatch occurred */
2361 sym_set_script_dp (np, cp, dsp);
2362 OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2365 else if (phase == 7) /* We definitely cannot handle parity errors */
2366 #if 1 /* in message-in phase due to the relection */
2367 goto reset_all; /* path and various message anticipations. */
2369 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
2372 OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2376 sym_start_reset(np);
2381 * chip exception handler for phase errors.
2383 * We have to construct a new transfer descriptor,
2384 * to transfer the rest of the current block.
2386 static void sym_int_ma (struct sym_hcb *np)
2399 u_char hflags, hflags0;
2403 dsp = INL(np, nc_dsp);
2404 dbc = INL(np, nc_dbc);
2405 dsa = INL(np, nc_dsa);
2408 rest = dbc & 0xffffff;
2412 * locate matching cp if any.
2414 cp = sym_ccb_from_dsa(np, dsa);
2417 * Donnot take into account dma fifo and various buffers in
2418 * INPUT phase since the chip flushes everything before
2419 * raising the MA interrupt for interrupted INPUT phases.
2420 * For DATA IN phase, we will check for the SWIDE later.
2422 if ((cmd & 7) != 1 && (cmd & 7) != 5) {
2425 if (np->features & FE_DFBC)
2426 delta = INW(np, nc_dfbc);
2431 * Read DFIFO, CTEST[4-6] using 1 PCI bus ownership.
2433 dfifo = INL(np, nc_dfifo);
2436 * Calculate remaining bytes in DMA fifo.
2437 * (CTEST5 = dfifo >> 16)
2439 if (dfifo & (DFS << 16))
2440 delta = ((((dfifo >> 8) & 0x300) |
2441 (dfifo & 0xff)) - rest) & 0x3ff;
2443 delta = ((dfifo & 0xff) - rest) & 0x7f;
2447 * The data in the dma fifo has not been transferred to
2448 * the target -> add the amount to the rest
2449 * and clear the data.
2450 * Check the sstat2 register in case of wide transfer.
2453 ss0 = INB(np, nc_sstat0);
2454 if (ss0 & OLF) rest++;
2455 if (!(np->features & FE_C10))
2456 if (ss0 & ORF) rest++;
2457 if (cp && (cp->phys.select.sel_scntl3 & EWS)) {
2458 ss2 = INB(np, nc_sstat2);
2459 if (ss2 & OLF1) rest++;
2460 if (!(np->features & FE_C10))
2461 if (ss2 & ORF1) rest++;
2467 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* dma fifo */
2468 OUTB(np, nc_stest3, TE|CSF); /* scsi fifo */
2472 * log the information
2474 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
2475 printf ("P%x%x RL=%d D=%d ", cmd&7, INB(np, nc_sbcl)&7,
2476 (unsigned) rest, (unsigned) delta);
2479 * try to find the interrupted script command,
2480 * and the address at which to continue.
2484 if (dsp > np->scripta_ba &&
2485 dsp <= np->scripta_ba + np->scripta_sz) {
2486 vdsp = (u32 *)((char*)np->scripta0 + (dsp-np->scripta_ba-8));
2489 else if (dsp > np->scriptb_ba &&
2490 dsp <= np->scriptb_ba + np->scriptb_sz) {
2491 vdsp = (u32 *)((char*)np->scriptb0 + (dsp-np->scriptb_ba-8));
2496 * log the information
2498 if (DEBUG_FLAGS & DEBUG_PHASE) {
2499 printf ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
2500 cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd);
2504 printf ("%s: interrupted SCRIPT address not found.\n",
2510 printf ("%s: SCSI phase error fixup: CCB already dequeued.\n",
2516 * get old startaddress and old length.
2518 oadr = scr_to_cpu(vdsp[1]);
2520 if (cmd & 0x10) { /* Table indirect */
2521 tblp = (u32 *) ((char*) &cp->phys + oadr);
2522 olen = scr_to_cpu(tblp[0]);
2523 oadr = scr_to_cpu(tblp[1]);
2526 olen = scr_to_cpu(vdsp[0]) & 0xffffff;
2529 if (DEBUG_FLAGS & DEBUG_PHASE) {
2530 printf ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
2531 (unsigned) (scr_to_cpu(vdsp[0]) >> 24),
2538 * check cmd against assumed interrupted script command.
2539 * If dt data phase, the MOVE instruction hasn't bit 4 of
2542 if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0]) >> 24)) {
2543 sym_print_addr(cp->cmd,
2544 "internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
2545 cmd, scr_to_cpu(vdsp[0]) >> 24);
2551 * if old phase not dataphase, leave here.
2554 sym_print_addr(cp->cmd,
2555 "phase change %x-%x %d@%08x resid=%d.\n",
2556 cmd&7, INB(np, nc_sbcl)&7, (unsigned)olen,
2557 (unsigned)oadr, (unsigned)rest);
2558 goto unexpected_phase;
2562 * Choose the correct PM save area.
2564 * Look at the PM_SAVE SCRIPT if you want to understand
2565 * this stuff. The equivalent code is implemented in
2566 * SCRIPTS for the 895A, 896 and 1010 that are able to
2567 * handle PM from the SCRIPTS processor.
2569 hflags0 = INB(np, HF_PRT);
2572 if (hflags & (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED)) {
2573 if (hflags & HF_IN_PM0)
2574 nxtdsp = scr_to_cpu(cp->phys.pm0.ret);
2575 else if (hflags & HF_IN_PM1)
2576 nxtdsp = scr_to_cpu(cp->phys.pm1.ret);
2578 if (hflags & HF_DP_SAVED)
2579 hflags ^= HF_ACT_PM;
2582 if (!(hflags & HF_ACT_PM)) {
2584 newcmd = SCRIPTA_BA(np, pm0_data);
2588 newcmd = SCRIPTA_BA(np, pm1_data);
2591 hflags &= ~(HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED);
2592 if (hflags != hflags0)
2593 OUTB(np, HF_PRT, hflags);
2596 * fillin the phase mismatch context
2598 pm->sg.addr = cpu_to_scr(oadr + olen - rest);
2599 pm->sg.size = cpu_to_scr(rest);
2600 pm->ret = cpu_to_scr(nxtdsp);
2603 * If we have a SWIDE,
2604 * - prepare the address to write the SWIDE from SCRIPTS,
2605 * - compute the SCRIPTS address to restart from,
2606 * - move current data pointer context by one byte.
2608 nxtdsp = SCRIPTA_BA(np, dispatch);
2609 if ((cmd & 7) == 1 && cp && (cp->phys.select.sel_scntl3 & EWS) &&
2610 (INB(np, nc_scntl2) & WSR)) {
2614 * Set up the table indirect for the MOVE
2615 * of the residual byte and adjust the data
2618 tmp = scr_to_cpu(pm->sg.addr);
2619 cp->phys.wresid.addr = cpu_to_scr(tmp);
2620 pm->sg.addr = cpu_to_scr(tmp + 1);
2621 tmp = scr_to_cpu(pm->sg.size);
2622 cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) | 1);
2623 pm->sg.size = cpu_to_scr(tmp - 1);
2626 * If only the residual byte is to be moved,
2627 * no PM context is needed.
2629 if ((tmp&0xffffff) == 1)
2633 * Prepare the address of SCRIPTS that will
2634 * move the residual byte to memory.
2636 nxtdsp = SCRIPTB_BA(np, wsr_ma_helper);
2639 if (DEBUG_FLAGS & DEBUG_PHASE) {
2640 sym_print_addr(cp->cmd, "PM %x %x %x / %x %x %x.\n",
2641 hflags0, hflags, newcmd,
2642 (unsigned)scr_to_cpu(pm->sg.addr),
2643 (unsigned)scr_to_cpu(pm->sg.size),
2644 (unsigned)scr_to_cpu(pm->ret));
2648 * Restart the SCRIPTS processor.
2650 sym_set_script_dp (np, cp, newcmd);
2651 OUTL_DSP(np, nxtdsp);
2655 * Unexpected phase changes that occurs when the current phase
2656 * is not a DATA IN or DATA OUT phase are due to error conditions.
2657 * Such event may only happen when the SCRIPTS is using a
2658 * multibyte SCSI MOVE.
2660 * Phase change Some possible cause
2662 * COMMAND --> MSG IN SCSI parity error detected by target.
2663 * COMMAND --> STATUS Bad command or refused by target.
2664 * MSG OUT --> MSG IN Message rejected by target.
2665 * MSG OUT --> COMMAND Bogus target that discards extended
2666 * negotiation messages.
2668 * The code below does not care of the new phase and so
2669 * trusts the target. Why to annoy it ?
2670 * If the interrupted phase is COMMAND phase, we restart at
2672 * If a target does not get all the messages after selection,
2673 * the code assumes blindly that the target discards extended
2674 * messages and clears the negotiation status.
2675 * If the target does not want all our response to negotiation,
2676 * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
2677 * bloat for such a should_not_happen situation).
2678 * In all other situation, we reset the BUS.
2679 * Are these assumptions reasonable ? (Wait and see ...)
2686 case 2: /* COMMAND phase */
2687 nxtdsp = SCRIPTA_BA(np, dispatch);
2690 case 3: /* STATUS phase */
2691 nxtdsp = SCRIPTA_BA(np, dispatch);
2694 case 6: /* MSG OUT phase */
2696 * If the device may want to use untagged when we want
2697 * tagged, we prepare an IDENTIFY without disc. granted,
2698 * since we will not be able to handle reselect.
2699 * Otherwise, we just don't care.
2701 if (dsp == SCRIPTA_BA(np, send_ident)) {
2702 if (cp->tag != NO_TAG && olen - rest <= 3) {
2703 cp->host_status = HS_BUSY;
2704 np->msgout[0] = IDENTIFY(0, cp->lun);
2705 nxtdsp = SCRIPTB_BA(np, ident_break_atn);
2708 nxtdsp = SCRIPTB_BA(np, ident_break);
2710 else if (dsp == SCRIPTB_BA(np, send_wdtr) ||
2711 dsp == SCRIPTB_BA(np, send_sdtr) ||
2712 dsp == SCRIPTB_BA(np, send_ppr)) {
2713 nxtdsp = SCRIPTB_BA(np, nego_bad_phase);
2714 if (dsp == SCRIPTB_BA(np, send_ppr)) {
2715 struct scsi_device *dev = cp->cmd->device;
2721 case 7: /* MSG IN phase */
2722 nxtdsp = SCRIPTA_BA(np, clrack);
2728 OUTL_DSP(np, nxtdsp);
2733 sym_start_reset(np);
2737 * chip interrupt handler
2739 * In normal situations, interrupt conditions occur one at
2740 * a time. But when something bad happens on the SCSI BUS,
2741 * the chip may raise several interrupt flags before
2742 * stopping and interrupting the CPU. The additionnal
2743 * interrupt flags are stacked in some extra registers
2744 * after the SIP and/or DIP flag has been raised in the
2745 * ISTAT. After the CPU has read the interrupt condition
2746 * flag from SIST or DSTAT, the chip unstacks the other
2747 * interrupt flags and sets the corresponding bits in
2748 * SIST or DSTAT. Since the chip starts stacking once the
2749 * SIP or DIP flag is set, there is a small window of time
2750 * where the stacking does not occur.
2752 * Typically, multiple interrupt conditions may happen in
2753 * the following situations:
2755 * - SCSI parity error + Phase mismatch (PAR|MA)
2756 * When an parity error is detected in input phase
2757 * and the device switches to msg-in phase inside a
2759 * - SCSI parity error + Unexpected disconnect (PAR|UDC)
2760 * When a stupid device does not want to handle the
2761 * recovery of an SCSI parity error.
2762 * - Some combinations of STO, PAR, UDC, ...
2763 * When using non compliant SCSI stuff, when user is
2764 * doing non compliant hot tampering on the BUS, when
2765 * something really bad happens to a device, etc ...
2767 * The heuristic suggested by SYMBIOS to handle
2768 * multiple interrupts is to try unstacking all
2769 * interrupts conditions and to handle them on some
2770 * priority based on error severity.
2771 * This will work when the unstacking has been
2772 * successful, but we cannot be 100 % sure of that,
2773 * since the CPU may have been faster to unstack than
2774 * the chip is able to stack. Hmmm ... But it seems that
2775 * such a situation is very unlikely to happen.
2777 * If this happen, for example STO caught by the CPU
2778 * then UDC happenning before the CPU have restarted
2779 * the SCRIPTS, the driver may wrongly complete the
2780 * same command on UDC, since the SCRIPTS didn't restart
2781 * and the DSA still points to the same command.
2782 * We avoid this situation by setting the DSA to an
2783 * invalid value when the CCB is completed and before
2784 * restarting the SCRIPTS.
2786 * Another issue is that we need some section of our
2787 * recovery procedures to be somehow uninterruptible but
2788 * the SCRIPTS processor does not provides such a
2789 * feature. For this reason, we handle recovery preferently
2790 * from the C code and check against some SCRIPTS critical
2791 * sections from the C code.
2793 * Hopefully, the interrupt handling of the driver is now
2794 * able to resist to weird BUS error conditions, but donnot
2795 * ask me for any guarantee that it will never fail. :-)
2796 * Use at your own decision and risk.
2799 irqreturn_t sym_interrupt(struct Scsi_Host *shost)
2801 struct sym_data *sym_data = shost_priv(shost);
2802 struct sym_hcb *np = sym_data->ncb;
2803 struct pci_dev *pdev = sym_data->pdev;
2804 u_char istat, istatc;
2809 * interrupt on the fly ?
2810 * (SCRIPTS may still be running)
2812 * A `dummy read' is needed to ensure that the
2813 * clear of the INTF flag reaches the device
2814 * and that posted writes are flushed to memory
2815 * before the scanning of the DONE queue.
2816 * Note that SCRIPTS also (dummy) read to memory
2817 * prior to deliver the INTF interrupt condition.
2819 istat = INB(np, nc_istat);
2821 OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem);
2822 istat |= INB(np, nc_istat); /* DUMMY READ */
2823 if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
2824 sym_wakeup_done(np);
2827 if (!(istat & (SIP|DIP)))
2828 return (istat & INTF) ? IRQ_HANDLED : IRQ_NONE;
2830 #if 0 /* We should never get this one */
2832 OUTB(np, nc_istat, CABRT);
2836 * PAR and MA interrupts may occur at the same time,
2837 * and we need to know of both in order to handle
2838 * this situation properly. We try to unstack SCSI
2839 * interrupts for that reason. BTW, I dislike a LOT
2840 * such a loop inside the interrupt routine.
2841 * Even if DMA interrupt stacking is very unlikely to
2842 * happen, we also try unstacking these ones, since
2843 * this has no performance impact.
2850 sist |= INW(np, nc_sist);
2852 dstat |= INB(np, nc_dstat);
2853 istatc = INB(np, nc_istat);
2856 /* Prevent deadlock waiting on a condition that may
2858 if (unlikely(sist == 0xffff && dstat == 0xff)) {
2859 if (pci_channel_offline(pdev))
2862 } while (istatc & (SIP|DIP));
2864 if (DEBUG_FLAGS & DEBUG_TINY)
2865 printf ("<%d|%x:%x|%x:%x>",
2866 (int)INB(np, nc_scr0),
2868 (unsigned)INL(np, nc_dsp),
2869 (unsigned)INL(np, nc_dbc));
2871 * On paper, a memory read barrier may be needed here to
2872 * prevent out of order LOADs by the CPU from having
2873 * prefetched stale data prior to DMA having occurred.
2874 * And since we are paranoid ... :)
2876 MEMORY_READ_BARRIER();
2879 * First, interrupts we want to service cleanly.
2881 * Phase mismatch (MA) is the most frequent interrupt
2882 * for chip earlier than the 896 and so we have to service
2883 * it as quickly as possible.
2884 * A SCSI parity error (PAR) may be combined with a phase
2885 * mismatch condition (MA).
2886 * Programmed interrupts (SIR) are used to call the C code
2888 * The single step interrupt (SSI) is not used in this
2891 if (!(sist & (STO|GEN|HTH|SGE|UDC|SBMC|RST)) &&
2892 !(dstat & (MDPE|BF|ABRT|IID))) {
2893 if (sist & PAR) sym_int_par (np, sist);
2894 else if (sist & MA) sym_int_ma (np);
2895 else if (dstat & SIR) sym_int_sir(np);
2896 else if (dstat & SSI) OUTONB_STD();
2897 else goto unknown_int;
2902 * Now, interrupts that donnot happen in normal
2903 * situations and that we may need to recover from.
2905 * On SCSI RESET (RST), we reset everything.
2906 * On SCSI BUS MODE CHANGE (SBMC), we complete all
2907 * active CCBs with RESET status, prepare all devices
2908 * for negotiating again and restart the SCRIPTS.
2909 * On STO and UDC, we complete the CCB with the corres-
2910 * ponding status and restart the SCRIPTS.
2913 printf("%s: SCSI BUS reset detected.\n", sym_name(np));
2914 sym_start_up(shost, 1);
2918 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
2919 OUTB(np, nc_stest3, TE|CSF); /* clear scsi fifo */
2921 if (!(sist & (GEN|HTH|SGE)) &&
2922 !(dstat & (MDPE|BF|ABRT|IID))) {
2923 if (sist & SBMC) sym_int_sbmc(shost);
2924 else if (sist & STO) sym_int_sto (np);
2925 else if (sist & UDC) sym_int_udc (np);
2926 else goto unknown_int;
2931 * Now, interrupts we are not able to recover cleanly.
2933 * Log message for hard errors.
2937 sym_log_hard_error(shost, sist, dstat);
2939 if ((sist & (GEN|HTH|SGE)) ||
2940 (dstat & (MDPE|BF|ABRT|IID))) {
2941 sym_start_reset(np);
2947 * We just miss the cause of the interrupt. :(
2948 * Print a message. The timeout will do the real work.
2950 printf( "%s: unknown interrupt(s) ignored, "
2951 "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n",
2952 sym_name(np), istat, dstat, sist);
2957 * Dequeue from the START queue all CCBs that match
2958 * a given target/lun/task condition (-1 means all),
2959 * and move them from the BUSY queue to the COMP queue
2960 * with DID_SOFT_ERROR status condition.
2961 * This function is used during error handling/recovery.
2962 * It is called with SCRIPTS not running.
2965 sym_dequeue_from_squeue(struct sym_hcb *np, int i, int target, int lun, int task)
2971 * Make sure the starting index is within range.
2973 assert((i >= 0) && (i < 2*MAX_QUEUE));
2976 * Walk until end of START queue and dequeue every job
2977 * that matches the target/lun/task condition.
2980 while (i != np->squeueput) {
2981 cp = sym_ccb_from_dsa(np, scr_to_cpu(np->squeue[i]));
2983 #ifdef SYM_CONF_IARB_SUPPORT
2984 /* Forget hints for IARB, they may be no longer relevant */
2985 cp->host_flags &= ~HF_HINT_IARB;
2987 if ((target == -1 || cp->target == target) &&
2988 (lun == -1 || cp->lun == lun) &&
2989 (task == -1 || cp->tag == task)) {
2990 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
2991 sym_set_cam_status(cp->cmd, DID_SOFT_ERROR);
2993 sym_set_cam_status(cp->cmd, DID_REQUEUE);
2995 sym_remque(&cp->link_ccbq);
2996 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3000 np->squeue[j] = np->squeue[i];
3001 if ((j += 2) >= MAX_QUEUE*2) j = 0;
3003 if ((i += 2) >= MAX_QUEUE*2) i = 0;
3005 if (i != j) /* Copy back the idle task if needed */
3006 np->squeue[j] = np->squeue[i];
3007 np->squeueput = j; /* Update our current start queue pointer */
3013 * chip handler for bad SCSI status condition
3015 * In case of bad SCSI status, we unqueue all the tasks
3016 * currently queued to the controller but not yet started
3017 * and then restart the SCRIPTS processor immediately.
3019 * QUEUE FULL and BUSY conditions are handled the same way.
3020 * Basically all the not yet started tasks are requeued in
3021 * device queue and the queue is frozen until a completion.
3023 * For CHECK CONDITION and COMMAND TERMINATED status, we use
3024 * the CCB of the failed command to prepare a REQUEST SENSE
3025 * SCSI command and queue it to the controller queue.
3027 * SCRATCHA is assumed to have been loaded with STARTPOS
3028 * before the SCRIPTS called the C code.
3030 static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb *cp)
3033 u_char s_status = cp->ssss_status;
3034 u_char h_flags = cp->host_flags;
3039 * Compute the index of the next job to start from SCRIPTS.
3041 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3044 * The last CCB queued used for IARB hint may be
3045 * no longer relevant. Forget it.
3047 #ifdef SYM_CONF_IARB_SUPPORT
3053 * Now deal with the SCSI status.
3058 if (sym_verbose >= 2) {
3059 sym_print_addr(cp->cmd, "%s\n",
3060 s_status == S_BUSY ? "BUSY" : "QUEUE FULL\n");
3063 default: /* S_INT, S_INT_COND_MET, S_CONFLICT */
3064 sym_complete_error (np, cp);
3069 * If we get an SCSI error when requesting sense, give up.
3071 if (h_flags & HF_SENSE) {
3072 sym_complete_error (np, cp);
3077 * Dequeue all queued CCBs for that device not yet started,
3078 * and restart the SCRIPTS processor immediately.
3080 sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3081 OUTL_DSP(np, SCRIPTA_BA(np, start));
3084 * Save some info of the actual IO.
3085 * Compute the data residual.
3087 cp->sv_scsi_status = cp->ssss_status;
3088 cp->sv_xerr_status = cp->xerr_status;
3089 cp->sv_resid = sym_compute_residual(np, cp);
3092 * Prepare all needed data structures for
3093 * requesting sense data.
3096 cp->scsi_smsg2[0] = IDENTIFY(0, cp->lun);
3100 * If we are currently using anything different from
3101 * async. 8 bit data transfers with that target,
3102 * start a negotiation, since the device may want
3103 * to report us a UNIT ATTENTION condition due to
3104 * a cause we currently ignore, and we donnot want
3105 * to be stuck with WIDE and/or SYNC data transfer.
3107 * cp->nego_status is filled by sym_prepare_nego().
3109 cp->nego_status = 0;
3110 msglen += sym_prepare_nego(np, cp, &cp->scsi_smsg2[msglen]);
3112 * Message table indirect structure.
3114 cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg2);
3115 cp->phys.smsg.size = cpu_to_scr(msglen);
3120 cp->phys.cmd.addr = CCB_BA(cp, sensecmd);
3121 cp->phys.cmd.size = cpu_to_scr(6);
3124 * patch requested size into sense command
3126 cp->sensecmd[0] = REQUEST_SENSE;
3127 cp->sensecmd[1] = 0;
3128 if (cp->cmd->device->scsi_level <= SCSI_2 && cp->lun <= 7)
3129 cp->sensecmd[1] = cp->lun << 5;
3130 cp->sensecmd[4] = SYM_SNS_BBUF_LEN;
3131 cp->data_len = SYM_SNS_BBUF_LEN;
3136 memset(cp->sns_bbuf, 0, SYM_SNS_BBUF_LEN);
3137 cp->phys.sense.addr = CCB_BA(cp, sns_bbuf);
3138 cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN);
3141 * requeue the command.
3143 startp = SCRIPTB_BA(np, sdata_in);
3145 cp->phys.head.savep = cpu_to_scr(startp);
3146 cp->phys.head.lastp = cpu_to_scr(startp);
3147 cp->startp = cpu_to_scr(startp);
3148 cp->goalp = cpu_to_scr(startp + 16);
3150 cp->host_xflags = 0;
3151 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
3152 cp->ssss_status = S_ILLEGAL;
3153 cp->host_flags = (HF_SENSE|HF_DATA_IN);
3154 cp->xerr_status = 0;
3155 cp->extra_bytes = 0;
3157 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, select));
3160 * Requeue the command.
3162 sym_put_start_queue(np, cp);
3165 * Give back to upper layer everything we have dequeued.
3167 sym_flush_comp_queue(np, 0);
3173 * After a device has accepted some management message
3174 * as BUS DEVICE RESET, ABORT TASK, etc ..., or when
3175 * a device signals a UNIT ATTENTION condition, some
3176 * tasks are thrown away by the device. We are required
3177 * to reflect that on our tasks list since the device
3178 * will never complete these tasks.
3180 * This function move from the BUSY queue to the COMP
3181 * queue all disconnected CCBs for a given target that
3182 * match the following criteria:
3183 * - lun=-1 means any logical UNIT otherwise a given one.
3184 * - task=-1 means any task, otherwise a given one.
3186 int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task)
3188 SYM_QUEHEAD qtmp, *qp;
3193 * Move the entire BUSY queue to our temporary queue.
3195 sym_que_init(&qtmp);
3196 sym_que_splice(&np->busy_ccbq, &qtmp);
3197 sym_que_init(&np->busy_ccbq);
3200 * Put all CCBs that matches our criteria into
3201 * the COMP queue and put back other ones into
3204 while ((qp = sym_remque_head(&qtmp)) != NULL) {
3205 struct scsi_cmnd *cmd;
3206 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3208 if (cp->host_status != HS_DISCONNECT ||
3209 cp->target != target ||
3210 (lun != -1 && cp->lun != lun) ||
3212 (cp->tag != NO_TAG && cp->scsi_smsg[2] != task))) {
3213 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
3216 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3218 /* Preserve the software timeout condition */
3219 if (sym_get_cam_status(cmd) != DID_TIME_OUT)
3220 sym_set_cam_status(cmd, cam_status);
3223 printf("XXXX TASK @%p CLEARED\n", cp);
3230 * chip handler for TASKS recovery
3232 * We cannot safely abort a command, while the SCRIPTS
3233 * processor is running, since we just would be in race
3236 * As long as we have tasks to abort, we keep the SEM
3237 * bit set in the ISTAT. When this bit is set, the
3238 * SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED)
3239 * each time it enters the scheduler.
3241 * If we have to reset a target, clear tasks of a unit,
3242 * or to perform the abort of a disconnected job, we
3243 * restart the SCRIPTS for selecting the target. Once
3244 * selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED).
3245 * If it loses arbitration, the SCRIPTS will interrupt again
3246 * the next time it will enter its scheduler, and so on ...
3248 * On SIR_TARGET_SELECTED, we scan for the more
3249 * appropriate thing to do:
3251 * - If nothing, we just sent a M_ABORT message to the
3252 * target to get rid of the useless SCSI bus ownership.
3253 * According to the specs, no tasks shall be affected.
3254 * - If the target is to be reset, we send it a M_RESET
3256 * - If a logical UNIT is to be cleared , we send the
3257 * IDENTIFY(lun) + M_ABORT.
3258 * - If an untagged task is to be aborted, we send the
3259 * IDENTIFY(lun) + M_ABORT.
3260 * - If a tagged task is to be aborted, we send the
3261 * IDENTIFY(lun) + task attributes + M_ABORT_TAG.
3263 * Once our 'kiss of death' :) message has been accepted
3264 * by the target, the SCRIPTS interrupts again
3265 * (SIR_ABORT_SENT). On this interrupt, we complete
3266 * all the CCBs that should have been aborted by the
3267 * target according to our message.
3269 static void sym_sir_task_recovery(struct sym_hcb *np, int num)
3273 struct sym_tcb *tp = NULL; /* gcc isn't quite smart enough yet */
3274 struct scsi_target *starget;
3275 int target=-1, lun=-1, task;
3280 * The SCRIPTS processor stopped before starting
3281 * the next command in order to allow us to perform
3282 * some task recovery.
3284 case SIR_SCRIPT_STOPPED:
3286 * Do we have any target to reset or unit to clear ?
3288 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
3289 tp = &np->target[i];
3291 (tp->lun0p && tp->lun0p->to_clear)) {
3297 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3298 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3308 * If not, walk the busy queue for any
3309 * disconnected CCB to be aborted.
3312 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3313 cp = sym_que_entry(qp,struct sym_ccb,link_ccbq);
3314 if (cp->host_status != HS_DISCONNECT)
3317 target = cp->target;
3324 * If some target is to be selected,
3325 * prepare and start the selection.
3328 tp = &np->target[target];
3329 np->abrt_sel.sel_id = target;
3330 np->abrt_sel.sel_scntl3 = tp->head.wval;
3331 np->abrt_sel.sel_sxfer = tp->head.sval;
3332 OUTL(np, nc_dsa, np->hcb_ba);
3333 OUTL_DSP(np, SCRIPTB_BA(np, sel_for_abort));
3338 * Now look for a CCB to abort that haven't started yet.
3339 * Btw, the SCRIPTS processor is still stopped, so
3340 * we are not in race.
3344 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3345 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3346 if (cp->host_status != HS_BUSY &&
3347 cp->host_status != HS_NEGOTIATE)
3351 #ifdef SYM_CONF_IARB_SUPPORT
3353 * If we are using IMMEDIATE ARBITRATION, we donnot
3354 * want to cancel the last queued CCB, since the
3355 * SCRIPTS may have anticipated the selection.
3357 if (cp == np->last_cp) {
3362 i = 1; /* Means we have found some */
3367 * We are done, so we donnot need
3368 * to synchronize with the SCRIPTS anylonger.
3369 * Remove the SEM flag from the ISTAT.
3372 OUTB(np, nc_istat, SIGP);
3376 * Compute index of next position in the start
3377 * queue the SCRIPTS intends to start and dequeue
3378 * all CCBs for that device that haven't been started.
3380 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3381 i = sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3384 * Make sure at least our IO to abort has been dequeued.
3386 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
3387 assert(i && sym_get_cam_status(cp->cmd) == DID_SOFT_ERROR);
3389 sym_remque(&cp->link_ccbq);
3390 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3393 * Keep track in cam status of the reason of the abort.
3395 if (cp->to_abort == 2)
3396 sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3398 sym_set_cam_status(cp->cmd, DID_ABORT);
3401 * Complete with error everything that we have dequeued.
3403 sym_flush_comp_queue(np, 0);
3406 * The SCRIPTS processor has selected a target
3407 * we may have some manual recovery to perform for.
3409 case SIR_TARGET_SELECTED:
3410 target = INB(np, nc_sdid) & 0xf;
3411 tp = &np->target[target];
3413 np->abrt_tbl.addr = cpu_to_scr(vtobus(np->abrt_msg));
3416 * If the target is to be reset, prepare a
3417 * M_RESET message and clear the to_reset flag
3418 * since we donnot expect this operation to fail.
3421 np->abrt_msg[0] = M_RESET;
3422 np->abrt_tbl.size = 1;
3428 * Otherwise, look for some logical unit to be cleared.
3430 if (tp->lun0p && tp->lun0p->to_clear)
3432 else if (tp->lunmp) {
3433 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3434 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3442 * If a logical unit is to be cleared, prepare
3443 * an IDENTIFY(lun) + ABORT MESSAGE.
3446 struct sym_lcb *lp = sym_lp(tp, lun);
3447 lp->to_clear = 0; /* We don't expect to fail here */
3448 np->abrt_msg[0] = IDENTIFY(0, lun);
3449 np->abrt_msg[1] = M_ABORT;
3450 np->abrt_tbl.size = 2;
3455 * Otherwise, look for some disconnected job to
3456 * abort for this target.
3460 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3461 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3462 if (cp->host_status != HS_DISCONNECT)
3464 if (cp->target != target)
3468 i = 1; /* Means we have some */
3473 * If we have none, probably since the device has
3474 * completed the command before we won abitration,
3475 * send a M_ABORT message without IDENTIFY.
3476 * According to the specs, the device must just
3477 * disconnect the BUS and not abort any task.
3480 np->abrt_msg[0] = M_ABORT;
3481 np->abrt_tbl.size = 1;
3486 * We have some task to abort.
3487 * Set the IDENTIFY(lun)
3489 np->abrt_msg[0] = IDENTIFY(0, cp->lun);
3492 * If we want to abort an untagged command, we
3493 * will send a IDENTIFY + M_ABORT.
3494 * Otherwise (tagged command), we will send
3495 * a IDENTITFY + task attributes + ABORT TAG.
3497 if (cp->tag == NO_TAG) {
3498 np->abrt_msg[1] = M_ABORT;
3499 np->abrt_tbl.size = 2;
3501 np->abrt_msg[1] = cp->scsi_smsg[1];
3502 np->abrt_msg[2] = cp->scsi_smsg[2];
3503 np->abrt_msg[3] = M_ABORT_TAG;
3504 np->abrt_tbl.size = 4;
3507 * Keep track of software timeout condition, since the
3508 * peripheral driver may not count retries on abort
3509 * conditions not due to timeout.
3511 if (cp->to_abort == 2)
3512 sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3513 cp->to_abort = 0; /* We donnot expect to fail here */
3517 * The target has accepted our message and switched
3518 * to BUS FREE phase as we expected.
3520 case SIR_ABORT_SENT:
3521 target = INB(np, nc_sdid) & 0xf;
3522 tp = &np->target[target];
3523 starget = tp->starget;
3526 ** If we didn't abort anything, leave here.
3528 if (np->abrt_msg[0] == M_ABORT)
3532 * If we sent a M_RESET, then a hardware reset has
3533 * been performed by the target.
3534 * - Reset everything to async 8 bit
3535 * - Tell ourself to negotiate next time :-)
3536 * - Prepare to clear all disconnected CCBs for
3537 * this target from our task list (lun=task=-1)
3541 if (np->abrt_msg[0] == M_RESET) {
3543 tp->head.wval = np->rv_scntl3;
3545 spi_period(starget) = 0;
3546 spi_offset(starget) = 0;
3547 spi_width(starget) = 0;
3548 spi_iu(starget) = 0;
3549 spi_dt(starget) = 0;
3550 spi_qas(starget) = 0;
3551 tp->tgoal.check_nego = 1;
3552 tp->tgoal.renego = 0;
3556 * Otherwise, check for the LUN and TASK(s)
3557 * concerned by the cancelation.
3558 * If it is not ABORT_TAG then it is CLEAR_QUEUE
3559 * or an ABORT message :-)
3562 lun = np->abrt_msg[0] & 0x3f;
3563 if (np->abrt_msg[1] == M_ABORT_TAG)
3564 task = np->abrt_msg[2];
3568 * Complete all the CCBs the device should have
3569 * aborted due to our 'kiss of death' message.
3571 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3572 sym_dequeue_from_squeue(np, i, target, lun, -1);
3573 sym_clear_tasks(np, DID_ABORT, target, lun, task);
3574 sym_flush_comp_queue(np, 0);
3577 * If we sent a BDR, make upper layer aware of that.
3579 if (np->abrt_msg[0] == M_RESET)
3580 starget_printk(KERN_NOTICE, starget,
3581 "has been reset\n");
3586 * Print to the log the message we intend to send.
3588 if (num == SIR_TARGET_SELECTED) {
3589 dev_info(&tp->starget->dev, "control msgout:");
3590 sym_printl_hex(np->abrt_msg, np->abrt_tbl.size);
3591 np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size);
3595 * Let the SCRIPTS processor continue.
3601 * Gerard's alchemy:) that deals with with the data
3602 * pointer for both MDP and the residual calculation.
3604 * I didn't want to bloat the code by more than 200
3605 * lines for the handling of both MDP and the residual.
3606 * This has been achieved by using a data pointer
3607 * representation consisting in an index in the data
3608 * array (dp_sg) and a negative offset (dp_ofs) that
3609 * have the following meaning:
3611 * - dp_sg = SYM_CONF_MAX_SG
3612 * we are at the end of the data script.
3613 * - dp_sg < SYM_CONF_MAX_SG
3614 * dp_sg points to the next entry of the scatter array
3615 * we want to transfer.
3617 * dp_ofs represents the residual of bytes of the
3618 * previous entry scatter entry we will send first.
3620 * no residual to send first.
3622 * The function sym_evaluate_dp() accepts an arbitray
3623 * offset (basically from the MDP message) and returns
3624 * the corresponding values of dp_sg and dp_ofs.
3627 static int sym_evaluate_dp(struct sym_hcb *np, struct sym_ccb *cp, u32 scr, int *ofs)
3630 int dp_ofs, dp_sg, dp_sgmin;
3635 * Compute the resulted data pointer in term of a script
3636 * address within some DATA script and a signed byte offset.
3640 if (dp_scr == SCRIPTA_BA(np, pm0_data))
3642 else if (dp_scr == SCRIPTA_BA(np, pm1_data))
3648 dp_scr = scr_to_cpu(pm->ret);
3649 dp_ofs -= scr_to_cpu(pm->sg.size) & 0x00ffffff;
3653 * If we are auto-sensing, then we are done.
3655 if (cp->host_flags & HF_SENSE) {
3661 * Deduce the index of the sg entry.
3662 * Keep track of the index of the first valid entry.
3663 * If result is dp_sg = SYM_CONF_MAX_SG, then we are at the
3666 tmp = scr_to_cpu(cp->goalp);
3667 dp_sg = SYM_CONF_MAX_SG;
3669 dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4);
3670 dp_sgmin = SYM_CONF_MAX_SG - cp->segments;
3673 * Move to the sg entry the data pointer belongs to.
3675 * If we are inside the data area, we expect result to be:
3678 * dp_ofs = 0 and dp_sg is the index of the sg entry
3679 * the data pointer belongs to (or the end of the data)
3681 * dp_ofs < 0 and dp_sg is the index of the sg entry
3682 * the data pointer belongs to + 1.
3686 while (dp_sg > dp_sgmin) {
3688 tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3689 n = dp_ofs + (tmp & 0xffffff);
3697 else if (dp_ofs > 0) {
3698 while (dp_sg < SYM_CONF_MAX_SG) {
3699 tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3700 dp_ofs -= (tmp & 0xffffff);
3708 * Make sure the data pointer is inside the data area.
3709 * If not, return some error.
3711 if (dp_sg < dp_sgmin || (dp_sg == dp_sgmin && dp_ofs < 0))
3713 else if (dp_sg > SYM_CONF_MAX_SG ||
3714 (dp_sg == SYM_CONF_MAX_SG && dp_ofs > 0))
3718 * Save the extreme pointer if needed.
3720 if (dp_sg > cp->ext_sg ||
3721 (dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) {
3723 cp->ext_ofs = dp_ofs;
3737 * chip handler for MODIFY DATA POINTER MESSAGE
3739 * We also call this function on IGNORE WIDE RESIDUE
3740 * messages that do not match a SWIDE full condition.
3741 * Btw, we assume in that situation that such a message
3742 * is equivalent to a MODIFY DATA POINTER (offset=-1).
3745 static void sym_modify_dp(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp, int ofs)
3748 u32 dp_scr = sym_get_script_dp (np, cp);
3756 * Not supported for auto-sense.
3758 if (cp->host_flags & HF_SENSE)
3762 * Apply our alchemy:) (see comments in sym_evaluate_dp()),
3763 * to the resulted data pointer.
3765 dp_sg = sym_evaluate_dp(np, cp, dp_scr, &dp_ofs);
3770 * And our alchemy:) allows to easily calculate the data
3771 * script address we want to return for the next data phase.
3773 dp_ret = cpu_to_scr(cp->goalp);
3774 dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4);
3777 * If offset / scatter entry is zero we donnot need
3778 * a context for the new current data pointer.
3786 * Get a context for the new current data pointer.
3788 hflags = INB(np, HF_PRT);
3790 if (hflags & HF_DP_SAVED)
3791 hflags ^= HF_ACT_PM;
3793 if (!(hflags & HF_ACT_PM)) {
3795 dp_scr = SCRIPTA_BA(np, pm0_data);
3799 dp_scr = SCRIPTA_BA(np, pm1_data);
3802 hflags &= ~(HF_DP_SAVED);
3804 OUTB(np, HF_PRT, hflags);
3807 * Set up the new current data pointer.
3808 * ofs < 0 there, and for the next data phase, we
3809 * want to transfer part of the data of the sg entry
3810 * corresponding to index dp_sg-1 prior to returning
3811 * to the main data script.
3813 pm->ret = cpu_to_scr(dp_ret);
3814 tmp = scr_to_cpu(cp->phys.data[dp_sg-1].addr);
3815 tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size) + dp_ofs;
3816 pm->sg.addr = cpu_to_scr(tmp);
3817 pm->sg.size = cpu_to_scr(-dp_ofs);
3820 sym_set_script_dp (np, cp, dp_scr);
3821 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
3825 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
3830 * chip calculation of the data residual.
3832 * As I used to say, the requirement of data residual
3833 * in SCSI is broken, useless and cannot be achieved
3834 * without huge complexity.
3835 * But most OSes and even the official CAM require it.
3836 * When stupidity happens to be so widely spread inside
3837 * a community, it gets hard to convince.
3839 * Anyway, I don't care, since I am not going to use
3840 * any software that considers this data residual as
3841 * a relevant information. :)
3844 int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp)
3846 int dp_sg, resid = 0;
3850 * Check for some data lost or just thrown away.
3851 * We are not required to be quite accurate in this
3852 * situation. Btw, if we are odd for output and the
3853 * device claims some more data, it may well happen
3854 * than our residual be zero. :-)
3856 if (cp->xerr_status & (XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) {
3857 if (cp->xerr_status & XE_EXTRA_DATA)
3858 resid -= cp->extra_bytes;
3859 if (cp->xerr_status & XE_SODL_UNRUN)
3861 if (cp->xerr_status & XE_SWIDE_OVRUN)
3866 * If all data has been transferred,
3867 * there is no residual.
3869 if (cp->phys.head.lastp == cp->goalp)
3873 * If no data transfer occurs, or if the data
3874 * pointer is weird, return full residual.
3876 if (cp->startp == cp->phys.head.lastp ||
3877 sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp),
3879 return cp->data_len - cp->odd_byte_adjustment;
3883 * If we were auto-sensing, then we are done.
3885 if (cp->host_flags & HF_SENSE) {
3890 * We are now full comfortable in the computation
3891 * of the data residual (2's complement).
3893 resid = -cp->ext_ofs;
3894 for (dp_sg = cp->ext_sg; dp_sg < SYM_CONF_MAX_SG; ++dp_sg) {
3895 u_int tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3896 resid += (tmp & 0xffffff);
3899 resid -= cp->odd_byte_adjustment;
3902 * Hopefully, the result is not too wrong.
3908 * Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER.
3910 * When we try to negotiate, we append the negotiation message
3911 * to the identify and (maybe) simple tag message.
3912 * The host status field is set to HS_NEGOTIATE to mark this
3915 * If the target doesn't answer this message immediately
3916 * (as required by the standard), the SIR_NEGO_FAILED interrupt
3917 * will be raised eventually.
3918 * The handler removes the HS_NEGOTIATE status, and sets the
3919 * negotiated value to the default (async / nowide).
3921 * If we receive a matching answer immediately, we check it
3922 * for validity, and set the values.
3924 * If we receive a Reject message immediately, we assume the
3925 * negotiation has failed, and fall back to standard values.
3927 * If we receive a negotiation message while not in HS_NEGOTIATE
3928 * state, it's a target initiated negotiation. We prepare a
3929 * (hopefully) valid answer, set our parameters, and send back
3930 * this answer to the target.
3932 * If the target doesn't fetch the answer (no message out phase),
3933 * we assume the negotiation has failed, and fall back to default
3934 * settings (SIR_NEGO_PROTO interrupt).
3936 * When we set the values, we adjust them in all ccbs belonging
3937 * to this target, in the controller's register, and in the "phys"
3938 * field of the controller's struct sym_hcb.
3942 * chip handler for SYNCHRONOUS DATA TRANSFER REQUEST (SDTR) message.
3945 sym_sync_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
3947 int target = cp->target;
3948 u_char chg, ofs, per, fak, div;
3950 if (DEBUG_FLAGS & DEBUG_NEGO) {
3951 sym_print_nego_msg(np, target, "sync msgin", np->msgin);
3955 * Get requested values.
3962 * Check values against our limits.
3965 if (ofs > np->maxoffs)
3966 {chg = 1; ofs = np->maxoffs;}
3970 if (per < np->minsync)
3971 {chg = 1; per = np->minsync;}
3975 * Get new chip synchronous parameters value.
3978 if (ofs && sym_getsync(np, 0, per, &div, &fak) < 0)
3981 if (DEBUG_FLAGS & DEBUG_NEGO) {
3982 sym_print_addr(cp->cmd,
3983 "sdtr: ofs=%d per=%d div=%d fak=%d chg=%d.\n",
3984 ofs, per, div, fak, chg);
3988 * If it was an answer we want to change,
3989 * then it isn't acceptable. Reject it.
3997 sym_setsync (np, target, ofs, per, div, fak);
4000 * It was an answer. We are done.
4006 * It was a request. Prepare an answer message.
4008 spi_populate_sync_msg(np->msgout, per, ofs);
4010 if (DEBUG_FLAGS & DEBUG_NEGO) {
4011 sym_print_nego_msg(np, target, "sync msgout", np->msgout);
4014 np->msgin [0] = M_NOOP;
4019 sym_setsync (np, target, 0, 0, 0, 0);
4023 static void sym_sync_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4029 * Request or answer ?
4031 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4032 OUTB(np, HS_PRT, HS_BUSY);
4033 if (cp->nego_status && cp->nego_status != NS_SYNC)
4039 * Check and apply new values.
4041 result = sym_sync_nego_check(np, req, cp);
4042 if (result) /* Not acceptable, reject it */
4044 if (req) { /* Was a request, send response. */
4045 cp->nego_status = NS_SYNC;
4046 OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4048 else /* Was a response, we are done. */
4049 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4053 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4057 * chip handler for PARALLEL PROTOCOL REQUEST (PPR) message.
4060 sym_ppr_nego_check(struct sym_hcb *np, int req, int target)
4062 struct sym_tcb *tp = &np->target[target];
4063 unsigned char fak, div;
4066 unsigned char per = np->msgin[3];
4067 unsigned char ofs = np->msgin[5];
4068 unsigned char wide = np->msgin[6];
4069 unsigned char opts = np->msgin[7] & PPR_OPT_MASK;
4071 if (DEBUG_FLAGS & DEBUG_NEGO) {
4072 sym_print_nego_msg(np, target, "ppr msgin", np->msgin);
4076 * Check values against our limits.
4078 if (wide > np->maxwide) {
4082 if (!wide || !(np->features & FE_U3EN))
4085 if (opts != (np->msgin[7] & PPR_OPT_MASK))
4088 dt = opts & PPR_OPT_DT;
4091 unsigned char maxoffs = dt ? np->maxoffs_dt : np->maxoffs;
4092 if (ofs > maxoffs) {
4099 unsigned char minsync = dt ? np->minsync_dt : np->minsync;
4100 if (per < minsync) {
4107 * Get new chip synchronous parameters value.
4110 if (ofs && sym_getsync(np, dt, per, &div, &fak) < 0)
4114 * If it was an answer we want to change,
4115 * then it isn't acceptable. Reject it.
4123 sym_setpprot(np, target, opts, ofs, per, wide, div, fak);
4126 * It was an answer. We are done.
4132 * It was a request. Prepare an answer message.
4134 spi_populate_ppr_msg(np->msgout, per, ofs, wide, opts);
4136 if (DEBUG_FLAGS & DEBUG_NEGO) {
4137 sym_print_nego_msg(np, target, "ppr msgout", np->msgout);
4140 np->msgin [0] = M_NOOP;
4145 sym_setpprot (np, target, 0, 0, 0, 0, 0, 0);
4147 * If it is a device response that should result in
4148 * ST, we may want to try a legacy negotiation later.
4150 if (!req && !opts) {
4151 tp->tgoal.period = per;
4152 tp->tgoal.offset = ofs;
4153 tp->tgoal.width = wide;
4154 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4155 tp->tgoal.check_nego = 1;
4160 static void sym_ppr_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4166 * Request or answer ?
4168 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4169 OUTB(np, HS_PRT, HS_BUSY);
4170 if (cp->nego_status && cp->nego_status != NS_PPR)
4176 * Check and apply new values.
4178 result = sym_ppr_nego_check(np, req, cp->target);
4179 if (result) /* Not acceptable, reject it */
4181 if (req) { /* Was a request, send response. */
4182 cp->nego_status = NS_PPR;
4183 OUTL_DSP(np, SCRIPTB_BA(np, ppr_resp));
4185 else /* Was a response, we are done. */
4186 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4190 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4194 * chip handler for WIDE DATA TRANSFER REQUEST (WDTR) message.
4197 sym_wide_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
4199 int target = cp->target;
4202 if (DEBUG_FLAGS & DEBUG_NEGO) {
4203 sym_print_nego_msg(np, target, "wide msgin", np->msgin);
4207 * Get requested values.
4210 wide = np->msgin[3];
4213 * Check values against our limits.
4215 if (wide > np->maxwide) {
4220 if (DEBUG_FLAGS & DEBUG_NEGO) {
4221 sym_print_addr(cp->cmd, "wdtr: wide=%d chg=%d.\n",
4226 * If it was an answer we want to change,
4227 * then it isn't acceptable. Reject it.
4235 sym_setwide (np, target, wide);
4238 * It was an answer. We are done.
4244 * It was a request. Prepare an answer message.
4246 spi_populate_width_msg(np->msgout, wide);
4248 np->msgin [0] = M_NOOP;
4250 if (DEBUG_FLAGS & DEBUG_NEGO) {
4251 sym_print_nego_msg(np, target, "wide msgout", np->msgout);
4260 static void sym_wide_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4266 * Request or answer ?
4268 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4269 OUTB(np, HS_PRT, HS_BUSY);
4270 if (cp->nego_status && cp->nego_status != NS_WIDE)
4276 * Check and apply new values.
4278 result = sym_wide_nego_check(np, req, cp);
4279 if (result) /* Not acceptable, reject it */
4281 if (req) { /* Was a request, send response. */
4282 cp->nego_status = NS_WIDE;
4283 OUTL_DSP(np, SCRIPTB_BA(np, wdtr_resp));
4284 } else { /* Was a response. */
4286 * Negotiate for SYNC immediately after WIDE response.
4287 * This allows to negotiate for both WIDE and SYNC on
4288 * a single SCSI command (Suggested by Justin Gibbs).
4290 if (tp->tgoal.offset) {
4291 spi_populate_sync_msg(np->msgout, tp->tgoal.period,
4294 if (DEBUG_FLAGS & DEBUG_NEGO) {
4295 sym_print_nego_msg(np, cp->target,
4296 "sync msgout", np->msgout);
4299 cp->nego_status = NS_SYNC;
4300 OUTB(np, HS_PRT, HS_NEGOTIATE);
4301 OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4304 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4310 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4314 * Reset DT, SYNC or WIDE to default settings.
4316 * Called when a negotiation does not succeed either
4317 * on rejection or on protocol error.
4319 * A target that understands a PPR message should never
4320 * reject it, and messing with it is very unlikely.
4321 * So, if a PPR makes problems, we may just want to
4322 * try a legacy negotiation later.
4324 static void sym_nego_default(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4326 switch (cp->nego_status) {
4329 sym_setpprot (np, cp->target, 0, 0, 0, 0, 0, 0);
4331 if (tp->tgoal.period < np->minsync)
4332 tp->tgoal.period = np->minsync;
4333 if (tp->tgoal.offset > np->maxoffs)
4334 tp->tgoal.offset = np->maxoffs;
4335 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4336 tp->tgoal.check_nego = 1;
4340 sym_setsync (np, cp->target, 0, 0, 0, 0);
4343 sym_setwide (np, cp->target, 0);
4346 np->msgin [0] = M_NOOP;
4347 np->msgout[0] = M_NOOP;
4348 cp->nego_status = 0;
4352 * chip handler for MESSAGE REJECT received in response to
4353 * PPR, WIDE or SYNCHRONOUS negotiation.
4355 static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4357 sym_nego_default(np, tp, cp);
4358 OUTB(np, HS_PRT, HS_BUSY);
4361 #define sym_printk(lvl, tp, cp, fmt, v...) do { \
4363 scmd_printk(lvl, cp->cmd, fmt, ##v); \
4365 starget_printk(lvl, tp->starget, fmt, ##v); \
4369 * chip exception handler for programmed interrupts.
4371 static void sym_int_sir(struct sym_hcb *np)
4373 u_char num = INB(np, nc_dsps);
4374 u32 dsa = INL(np, nc_dsa);
4375 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
4376 u_char target = INB(np, nc_sdid) & 0x0f;
4377 struct sym_tcb *tp = &np->target[target];
4380 if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num);
4383 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
4385 * SCRIPTS tell us that we may have to update
4386 * 64 bit DMA segment registers.
4388 case SIR_DMAP_DIRTY:
4389 sym_update_dmap_regs(np);
4393 * Command has been completed with error condition
4394 * or has been auto-sensed.
4396 case SIR_COMPLETE_ERROR:
4397 sym_complete_error(np, cp);
4400 * The C code is currently trying to recover from something.
4401 * Typically, user want to abort some command.
4403 case SIR_SCRIPT_STOPPED:
4404 case SIR_TARGET_SELECTED:
4405 case SIR_ABORT_SENT:
4406 sym_sir_task_recovery(np, num);
4409 * The device didn't go to MSG OUT phase after having
4410 * been selected with ATN. We do not want to handle that.
4412 case SIR_SEL_ATN_NO_MSG_OUT:
4413 sym_printk(KERN_WARNING, tp, cp,
4414 "No MSG OUT phase after selection with ATN\n");
4417 * The device didn't switch to MSG IN phase after
4418 * having reselected the initiator.
4420 case SIR_RESEL_NO_MSG_IN:
4421 sym_printk(KERN_WARNING, tp, cp,
4422 "No MSG IN phase after reselection\n");
4425 * After reselection, the device sent a message that wasn't
4428 case SIR_RESEL_NO_IDENTIFY:
4429 sym_printk(KERN_WARNING, tp, cp,
4430 "No IDENTIFY after reselection\n");
4433 * The device reselected a LUN we do not know about.
4435 case SIR_RESEL_BAD_LUN:
4436 np->msgout[0] = M_RESET;
4439 * The device reselected for an untagged nexus and we
4442 case SIR_RESEL_BAD_I_T_L:
4443 np->msgout[0] = M_ABORT;
4446 * The device reselected for a tagged nexus that we do not have.
4448 case SIR_RESEL_BAD_I_T_L_Q:
4449 np->msgout[0] = M_ABORT_TAG;
4452 * The SCRIPTS let us know that the device has grabbed
4453 * our message and will abort the job.
4455 case SIR_RESEL_ABORTED:
4456 np->lastmsg = np->msgout[0];
4457 np->msgout[0] = M_NOOP;
4458 sym_printk(KERN_WARNING, tp, cp,
4459 "message %x sent on bad reselection\n", np->lastmsg);
4462 * The SCRIPTS let us know that a message has been
4463 * successfully sent to the device.
4465 case SIR_MSG_OUT_DONE:
4466 np->lastmsg = np->msgout[0];
4467 np->msgout[0] = M_NOOP;
4468 /* Should we really care of that */
4469 if (np->lastmsg == M_PARITY || np->lastmsg == M_ID_ERROR) {
4471 cp->xerr_status &= ~XE_PARITY_ERR;
4472 if (!cp->xerr_status)
4473 OUTOFFB(np, HF_PRT, HF_EXT_ERR);
4478 * The device didn't send a GOOD SCSI status.
4479 * We may have some work to do prior to allow
4480 * the SCRIPTS processor to continue.
4482 case SIR_BAD_SCSI_STATUS:
4485 sym_sir_bad_scsi_status(np, num, cp);
4488 * We are asked by the SCRIPTS to prepare a
4491 case SIR_REJECT_TO_SEND:
4492 sym_print_msg(cp, "M_REJECT to send for ", np->msgin);
4493 np->msgout[0] = M_REJECT;
4496 * We have been ODD at the end of a DATA IN
4497 * transfer and the device didn't send a
4498 * IGNORE WIDE RESIDUE message.
4499 * It is a data overrun condition.
4501 case SIR_SWIDE_OVERRUN:
4503 OUTONB(np, HF_PRT, HF_EXT_ERR);
4504 cp->xerr_status |= XE_SWIDE_OVRUN;
4508 * We have been ODD at the end of a DATA OUT
4510 * It is a data underrun condition.
4512 case SIR_SODL_UNDERRUN:
4514 OUTONB(np, HF_PRT, HF_EXT_ERR);
4515 cp->xerr_status |= XE_SODL_UNRUN;
4519 * The device wants us to tranfer more data than
4520 * expected or in the wrong direction.
4521 * The number of extra bytes is in scratcha.
4522 * It is a data overrun condition.
4524 case SIR_DATA_OVERRUN:
4526 OUTONB(np, HF_PRT, HF_EXT_ERR);
4527 cp->xerr_status |= XE_EXTRA_DATA;
4528 cp->extra_bytes += INL(np, nc_scratcha);
4532 * The device switched to an illegal phase (4/5).
4536 OUTONB(np, HF_PRT, HF_EXT_ERR);
4537 cp->xerr_status |= XE_BAD_PHASE;
4541 * We received a message.
4543 case SIR_MSG_RECEIVED:
4546 switch (np->msgin [0]) {
4548 * We received an extended message.
4549 * We handle MODIFY DATA POINTER, SDTR, WDTR
4550 * and reject all other extended messages.
4553 switch (np->msgin [2]) {
4555 if (DEBUG_FLAGS & DEBUG_POINTER)
4556 sym_print_msg(cp, "extended msg ",
4558 tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) +
4559 (np->msgin[5]<<8) + (np->msgin[6]);
4560 sym_modify_dp(np, tp, cp, tmp);
4563 sym_sync_nego(np, tp, cp);
4566 sym_ppr_nego(np, tp, cp);
4569 sym_wide_nego(np, tp, cp);
4576 * We received a 1/2 byte message not handled from SCRIPTS.
4577 * We are only expecting MESSAGE REJECT and IGNORE WIDE
4578 * RESIDUE messages that haven't been anticipated by
4579 * SCRIPTS on SWIDE full condition. Unanticipated IGNORE
4580 * WIDE RESIDUE messages are aliased as MODIFY DP (-1).
4583 if (DEBUG_FLAGS & DEBUG_POINTER)
4584 sym_print_msg(cp, "1 or 2 byte ", np->msgin);
4585 if (cp->host_flags & HF_SENSE)
4586 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4588 sym_modify_dp(np, tp, cp, -1);
4591 if (INB(np, HS_PRT) == HS_NEGOTIATE)
4592 sym_nego_rejected(np, tp, cp);
4594 sym_print_addr(cp->cmd,
4595 "M_REJECT received (%x:%x).\n",
4596 scr_to_cpu(np->lastmsg), np->msgout[0]);
4605 * We received an unknown message.
4606 * Ignore all MSG IN phases and reject it.
4609 sym_print_msg(cp, "WEIRD message received", np->msgin);
4610 OUTL_DSP(np, SCRIPTB_BA(np, msg_weird));
4613 * Negotiation failed.
4614 * Target does not send us the reply.
4615 * Remove the HS_NEGOTIATE status.
4617 case SIR_NEGO_FAILED:
4618 OUTB(np, HS_PRT, HS_BUSY);
4620 * Negotiation failed.
4621 * Target does not want answer message.
4624 case SIR_NEGO_PROTO:
4625 sym_nego_default(np, tp, cp);
4633 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4636 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4643 * Acquire a control block
4645 struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order)
4647 u_char tn = cmd->device->id;
4648 u_char ln = cmd->device->lun;
4649 struct sym_tcb *tp = &np->target[tn];
4650 struct sym_lcb *lp = sym_lp(tp, ln);
4651 u_short tag = NO_TAG;
4653 struct sym_ccb *cp = NULL;
4656 * Look for a free CCB
4658 if (sym_que_empty(&np->free_ccbq))
4660 qp = sym_remque_head(&np->free_ccbq);
4663 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
4667 * If we have been asked for a tagged command.
4671 * Debugging purpose.
4673 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4674 if (lp->busy_itl != 0)
4678 * Allocate resources for tags if not yet.
4681 sym_alloc_lcb_tags(np, tn, ln);
4686 * Get a tag for this SCSI IO and set up
4687 * the CCB bus address for reselection,
4688 * and count it for this LUN.
4689 * Toggle reselect path to tagged.
4691 if (lp->busy_itlq < SYM_CONF_MAX_TASK) {
4692 tag = lp->cb_tags[lp->ia_tag];
4693 if (++lp->ia_tag == SYM_CONF_MAX_TASK)
4696 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4697 lp->itlq_tbl[tag] = cpu_to_scr(cp->ccb_ba);
4699 cpu_to_scr(SCRIPTA_BA(np, resel_tag));
4701 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4702 cp->tags_si = lp->tags_si;
4703 ++lp->tags_sum[cp->tags_si];
4711 * This command will not be tagged.
4712 * If we already have either a tagged or untagged
4713 * one, refuse to overlap this untagged one.
4717 * Debugging purpose.
4719 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4720 if (lp->busy_itl != 0 || lp->busy_itlq != 0)
4724 * Count this nexus for this LUN.
4725 * Set up the CCB bus address for reselection.
4726 * Toggle reselect path to untagged.
4729 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4730 if (lp->busy_itl == 1) {
4731 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
4733 cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
4741 * Put the CCB into the busy queue.
4743 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
4744 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4746 sym_remque(&cp->link2_ccbq);
4747 sym_insque_tail(&cp->link2_ccbq, &lp->waiting_ccbq);
4752 cp->odd_byte_adjustment = 0;
4754 cp->order = tag_order;
4758 if (DEBUG_FLAGS & DEBUG_TAGS) {
4759 sym_print_addr(cmd, "ccb @%p using tag %d.\n", cp, tag);
4765 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4770 * Release one control block
4772 void sym_free_ccb (struct sym_hcb *np, struct sym_ccb *cp)
4774 struct sym_tcb *tp = &np->target[cp->target];
4775 struct sym_lcb *lp = sym_lp(tp, cp->lun);
4777 if (DEBUG_FLAGS & DEBUG_TAGS) {
4778 sym_print_addr(cp->cmd, "ccb @%p freeing tag %d.\n",
4787 * If tagged, release the tag, set the relect path
4789 if (cp->tag != NO_TAG) {
4790 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4791 --lp->tags_sum[cp->tags_si];
4794 * Free the tag value.
4796 lp->cb_tags[lp->if_tag] = cp->tag;
4797 if (++lp->if_tag == SYM_CONF_MAX_TASK)
4800 * Make the reselect path invalid,
4801 * and uncount this CCB.
4803 lp->itlq_tbl[cp->tag] = cpu_to_scr(np->bad_itlq_ba);
4805 } else { /* Untagged */
4807 * Make the reselect path invalid,
4808 * and uncount this CCB.
4810 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
4814 * If no JOB active, make the LUN reselect path invalid.
4816 if (lp->busy_itlq == 0 && lp->busy_itl == 0)
4818 cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
4822 * We donnot queue more than 1 ccb per target
4823 * with negotiation at any time. If this ccb was
4824 * used for negotiation, clear this info in the tcb.
4826 if (cp == tp->nego_cp)
4829 #ifdef SYM_CONF_IARB_SUPPORT
4831 * If we just complete the last queued CCB,
4832 * clear this info that is no longer relevant.
4834 if (cp == np->last_cp)
4839 * Make this CCB available.
4842 cp->host_status = HS_IDLE;
4843 sym_remque(&cp->link_ccbq);
4844 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4846 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4848 sym_remque(&cp->link2_ccbq);
4849 sym_insque_tail(&cp->link2_ccbq, &np->dummy_ccbq);
4851 if (cp->tag != NO_TAG)
4854 --lp->started_no_tag;
4862 * Allocate a CCB from memory and initialize its fixed part.
4864 static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np)
4866 struct sym_ccb *cp = NULL;
4870 * Prevent from allocating more CCBs than we can
4871 * queue to the controller.
4873 if (np->actccbs >= SYM_CONF_MAX_START)
4877 * Allocate memory for this CCB.
4879 cp = sym_calloc_dma(sizeof(struct sym_ccb), "CCB");
4889 * Compute the bus address of this ccb.
4891 cp->ccb_ba = vtobus(cp);
4894 * Insert this ccb into the hashed list.
4896 hcode = CCB_HASH_CODE(cp->ccb_ba);
4897 cp->link_ccbh = np->ccbh[hcode];
4898 np->ccbh[hcode] = cp;
4901 * Initialyze the start and restart actions.
4903 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, idle));
4904 cp->phys.head.go.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
4907 * Initilialyze some other fields.
4909 cp->phys.smsg_ext.addr = cpu_to_scr(HCB_BA(np, msgin[2]));
4912 * Chain into free ccb queue.
4914 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4917 * Chain into optionnal lists.
4919 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4920 sym_insque_head(&cp->link2_ccbq, &np->dummy_ccbq);
4925 sym_mfree_dma(cp, sizeof(*cp), "CCB");
4930 * Look up a CCB from a DSA value.
4932 static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa)
4937 hcode = CCB_HASH_CODE(dsa);
4938 cp = np->ccbh[hcode];
4940 if (cp->ccb_ba == dsa)
4949 * Target control block initialisation.
4950 * Nothing important to do at the moment.
4952 static void sym_init_tcb (struct sym_hcb *np, u_char tn)
4954 #if 0 /* Hmmm... this checking looks paranoid. */
4956 * Check some alignments required by the chip.
4958 assert (((offsetof(struct sym_reg, nc_sxfer) ^
4959 offsetof(struct sym_tcb, head.sval)) &3) == 0);
4960 assert (((offsetof(struct sym_reg, nc_scntl3) ^
4961 offsetof(struct sym_tcb, head.wval)) &3) == 0);
4966 * Lun control block allocation and initialization.
4968 struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
4970 struct sym_tcb *tp = &np->target[tn];
4971 struct sym_lcb *lp = NULL;
4974 * Initialize the target control block if not yet.
4976 sym_init_tcb (np, tn);
4979 * Allocate the LCB bus address array.
4980 * Compute the bus address of this table.
4982 if (ln && !tp->luntbl) {
4983 tp->luntbl = sym_calloc_dma(256, "LUNTBL");
4986 memset32(tp->luntbl, cpu_to_scr(vtobus(&np->badlun_sa)), 64);
4987 tp->head.luntbl_sa = cpu_to_scr(vtobus(tp->luntbl));
4991 * Allocate the table of pointers for LUN(s) > 0, if needed.
4993 if (ln && !tp->lunmp) {
4994 tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
5002 * Make it available to the chip.
5004 lp = sym_calloc_dma(sizeof(struct sym_lcb), "LCB");
5009 tp->luntbl[ln] = cpu_to_scr(vtobus(lp));
5013 tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
5018 * Let the itl task point to error handling.
5020 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
5023 * Set the reselect pattern to our default. :)
5025 lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5028 * Set user capabilities.
5030 lp->user_flags = tp->usrflags & (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
5032 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5034 * Initialize device queueing.
5036 sym_que_init(&lp->waiting_ccbq);
5037 sym_que_init(&lp->started_ccbq);
5038 lp->started_max = SYM_CONF_MAX_TASK;
5039 lp->started_limit = SYM_CONF_MAX_TASK;
5047 * Allocate LCB resources for tagged command queuing.
5049 static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln)
5051 struct sym_tcb *tp = &np->target[tn];
5052 struct sym_lcb *lp = sym_lp(tp, ln);
5056 * Allocate the task table and and the tag allocation
5057 * circular buffer. We want both or none.
5059 lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5062 lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_ATOMIC);
5064 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5065 lp->itlq_tbl = NULL;
5070 * Initialize the task table with invalid entries.
5072 memset32(lp->itlq_tbl, cpu_to_scr(np->notask_ba), SYM_CONF_MAX_TASK);
5075 * Fill up the tag buffer with tag numbers.
5077 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++)
5081 * Make the task table available to SCRIPTS,
5082 * And accept tagged commands now.
5084 lp->head.itlq_tbl_sa = cpu_to_scr(vtobus(lp->itlq_tbl));
5092 * Lun control block deallocation. Returns the number of valid remaining LCBs
5095 int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
5097 struct sym_tcb *tp = &np->target[tn];
5098 struct sym_lcb *lp = sym_lp(tp, ln);
5105 sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
5108 tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
5110 tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
5111 tp->lunmp[ln] = NULL;
5115 tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
5119 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5123 sym_mfree_dma(lp, sizeof(*lp), "LCB");
5129 * Queue a SCSI IO to the controller.
5131 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
5133 struct scsi_device *sdev = cmd->device;
5141 * Keep track of the IO in our CCB.
5146 * Retrieve the target descriptor.
5148 tp = &np->target[cp->target];
5151 * Retrieve the lun descriptor.
5153 lp = sym_lp(tp, sdev->lun);
5155 can_disconnect = (cp->tag != NO_TAG) ||
5156 (lp && (lp->curr_flags & SYM_DISC_ENABLED));
5158 msgptr = cp->scsi_smsg;
5160 msgptr[msglen++] = IDENTIFY(can_disconnect, sdev->lun);
5163 * Build the tag message if present.
5165 if (cp->tag != NO_TAG) {
5166 u_char order = cp->order;
5174 order = M_SIMPLE_TAG;
5176 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
5178 * Avoid too much reordering of SCSI commands.
5179 * The algorithm tries to prevent completion of any
5180 * tagged command from being delayed against more
5181 * than 3 times the max number of queued commands.
5183 if (lp && lp->tags_since > 3*SYM_CONF_MAX_TAG) {
5184 lp->tags_si = !(lp->tags_si);
5185 if (lp->tags_sum[lp->tags_si]) {
5186 order = M_ORDERED_TAG;
5187 if ((DEBUG_FLAGS & DEBUG_TAGS)||sym_verbose>1) {
5189 "ordered tag forced.\n");
5195 msgptr[msglen++] = order;
5198 * For less than 128 tags, actual tags are numbered
5199 * 1,3,5,..2*MAXTAGS+1,since we may have to deal
5200 * with devices that have problems with #TAG 0 or too
5201 * great #TAG numbers. For more tags (up to 256),
5202 * we use directly our tag number.
5204 #if SYM_CONF_MAX_TASK > (512/4)
5205 msgptr[msglen++] = cp->tag;
5207 msgptr[msglen++] = (cp->tag << 1) + 1;
5212 * Build a negotiation message if needed.
5213 * (nego_status is filled by sym_prepare_nego())
5215 * Always negotiate on INQUIRY and REQUEST SENSE.
5218 cp->nego_status = 0;
5219 if ((tp->tgoal.check_nego ||
5220 cmd->cmnd[0] == INQUIRY || cmd->cmnd[0] == REQUEST_SENSE) &&
5221 !tp->nego_cp && lp) {
5222 msglen += sym_prepare_nego(np, cp, msgptr + msglen);
5228 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, select));
5229 cp->phys.head.go.restart = cpu_to_scr(SCRIPTA_BA(np, resel_dsa));
5234 cp->phys.select.sel_id = cp->target;
5235 cp->phys.select.sel_scntl3 = tp->head.wval;
5236 cp->phys.select.sel_sxfer = tp->head.sval;
5237 cp->phys.select.sel_scntl4 = tp->head.uval;
5242 cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg);
5243 cp->phys.smsg.size = cpu_to_scr(msglen);
5248 cp->host_xflags = 0;
5249 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
5250 cp->ssss_status = S_ILLEGAL;
5251 cp->xerr_status = 0;
5253 cp->extra_bytes = 0;
5256 * extreme data pointer.
5257 * shall be positive, so -1 is lower than lowest.:)
5263 * Build the CDB and DATA descriptor block
5266 return sym_setup_data_and_start(np, cmd, cp);
5270 * Reset a SCSI target (all LUNs of this target).
5272 int sym_reset_scsi_target(struct sym_hcb *np, int target)
5276 if (target == np->myaddr || (u_int)target >= SYM_CONF_MAX_TARGET)
5279 tp = &np->target[target];
5282 np->istat_sem = SEM;
5283 OUTB(np, nc_istat, SIGP|SEM);
5291 static int sym_abort_ccb(struct sym_hcb *np, struct sym_ccb *cp, int timed_out)
5294 * Check that the IO is active.
5296 if (!cp || !cp->host_status || cp->host_status == HS_WAIT)
5300 * If a previous abort didn't succeed in time,
5301 * perform a BUS reset.
5304 sym_reset_scsi_bus(np, 1);
5309 * Mark the CCB for abort and allow time for.
5311 cp->to_abort = timed_out ? 2 : 1;
5314 * Tell the SCRIPTS processor to stop and synchronize with us.
5316 np->istat_sem = SEM;
5317 OUTB(np, nc_istat, SIGP|SEM);
5321 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, int timed_out)
5327 * Look up our CCB control block.
5330 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
5331 struct sym_ccb *cp2 = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5332 if (cp2->cmd == cmd) {
5338 return sym_abort_ccb(np, cp, timed_out);
5342 * Complete execution of a SCSI command with extended
5343 * error, SCSI status error, or having been auto-sensed.
5345 * The SCRIPTS processor is not running there, so we
5346 * can safely access IO registers and remove JOBs from
5348 * SCRATCHA is assumed to have been loaded with STARTPOS
5349 * before the SCRIPTS called the C code.
5351 void sym_complete_error(struct sym_hcb *np, struct sym_ccb *cp)
5353 struct scsi_device *sdev;
5354 struct scsi_cmnd *cmd;
5355 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5363 * Paranoid check. :)
5365 if (!cp || !cp->cmd)
5370 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_RESULT)) {
5371 dev_info(&sdev->sdev_gendev, "CCB=%p STAT=%x/%x/%x\n", cp,
5372 cp->host_status, cp->ssss_status, cp->host_flags);
5375 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5377 * Get target and lun pointers.
5379 tp = &np->target[cp->target];
5380 lp = sym_lp(tp, sdev->lun);
5384 * Check for extended errors.
5386 if (cp->xerr_status) {
5388 sym_print_xerr(cmd, cp->xerr_status);
5389 if (cp->host_status == HS_COMPLETE)
5390 cp->host_status = HS_COMP_ERR;
5394 * Calculate the residual.
5396 resid = sym_compute_residual(np, cp);
5398 if (!SYM_SETUP_RESIDUAL_SUPPORT) {/* If user does not want residuals */
5399 resid = 0; /* throw them away. :) */
5404 printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5408 * Dequeue all queued CCBs for that device
5409 * not yet started by SCRIPTS.
5411 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
5412 i = sym_dequeue_from_squeue(np, i, cp->target, sdev->lun, -1);
5415 * Restart the SCRIPTS processor.
5417 OUTL_DSP(np, SCRIPTA_BA(np, start));
5419 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5420 if (cp->host_status == HS_COMPLETE &&
5421 cp->ssss_status == S_QUEUE_FULL) {
5422 if (!lp || lp->started_tags - i < 2)
5425 * Decrease queue depth as needed.
5427 lp->started_max = lp->started_tags - i - 1;
5430 if (sym_verbose >= 2) {
5431 sym_print_addr(cmd, " queue depth is now %d\n",
5438 cp->host_status = HS_BUSY;
5439 cp->ssss_status = S_ILLEGAL;
5442 * Let's requeue it to device.
5444 sym_set_cam_status(cmd, DID_SOFT_ERROR);
5450 * Build result in CAM ccb.
5452 sym_set_cam_result_error(np, cp, resid);
5454 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5458 * Add this one to the COMP queue.
5460 sym_remque(&cp->link_ccbq);
5461 sym_insque_head(&cp->link_ccbq, &np->comp_ccbq);
5464 * Complete all those commands with either error
5465 * or requeue condition.
5467 sym_flush_comp_queue(np, 0);
5469 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5471 * Donnot start more than 1 command after an error.
5473 sym_start_next_ccbs(np, lp, 1);
5478 * Complete execution of a successful SCSI command.
5480 * Only successful commands go to the DONE queue,
5481 * since we need to have the SCRIPTS processor
5482 * stopped on any error condition.
5483 * The SCRIPTS processor is running while we are
5484 * completing successful commands.
5486 void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp)
5488 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5492 struct scsi_cmnd *cmd;
5496 * Paranoid check. :)
5498 if (!cp || !cp->cmd)
5500 assert (cp->host_status == HS_COMPLETE);
5507 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5509 * Get target and lun pointers.
5511 tp = &np->target[cp->target];
5512 lp = sym_lp(tp, cp->lun);
5516 * If all data have been transferred, given than no
5517 * extended error did occur, there is no residual.
5520 if (cp->phys.head.lastp != cp->goalp)
5521 resid = sym_compute_residual(np, cp);
5524 * Wrong transfer residuals may be worse than just always
5525 * returning zero. User can disable this feature in
5526 * sym53c8xx.h. Residual support is enabled by default.
5528 if (!SYM_SETUP_RESIDUAL_SUPPORT)
5532 printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5536 * Build result in CAM ccb.
5538 sym_set_cam_result_ok(cp, cmd, resid);
5540 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5542 * If max number of started ccbs had been reduced,
5543 * increase it if 200 good status received.
5545 if (lp && lp->started_max < lp->started_limit) {
5547 if (lp->num_sgood >= 200) {
5550 if (sym_verbose >= 2) {
5551 sym_print_addr(cmd, " queue depth is now %d\n",
5561 sym_free_ccb (np, cp);
5563 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5565 * Requeue a couple of awaiting scsi commands.
5567 if (!sym_que_empty(&lp->waiting_ccbq))
5568 sym_start_next_ccbs(np, lp, 2);
5571 * Complete the command.
5573 sym_xpt_done(np, cmd);
5577 * Soft-attach the controller.
5579 int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram *nvram)
5581 struct sym_hcb *np = sym_get_hcb(shost);
5585 * Get some info about the firmware.
5587 np->scripta_sz = fw->a_size;
5588 np->scriptb_sz = fw->b_size;
5589 np->scriptz_sz = fw->z_size;
5590 np->fw_setup = fw->setup;
5591 np->fw_patch = fw->patch;
5592 np->fw_name = fw->name;
5595 * Save setting of some IO registers, so we will
5596 * be able to probe specific implementations.
5598 sym_save_initial_setting (np);
5601 * Reset the chip now, since it has been reported
5602 * that SCSI clock calibration may not work properly
5603 * if the chip is currently active.
5608 * Prepare controller and devices settings, according
5609 * to chip features, user set-up and driver set-up.
5611 sym_prepare_setting(shost, np, nvram);
5614 * Check the PCI clock frequency.
5615 * Must be performed after prepare_setting since it destroys
5616 * STEST1 that is used to probe for the clock doubler.
5618 i = sym_getpciclock(np);
5619 if (i > 37000 && !(np->features & FE_66MHZ))
5620 printf("%s: PCI BUS clock seems too high: %u KHz.\n",
5624 * Allocate the start queue.
5626 np->squeue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"SQUEUE");
5629 np->squeue_ba = vtobus(np->squeue);
5632 * Allocate the done queue.
5634 np->dqueue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"DQUEUE");
5637 np->dqueue_ba = vtobus(np->dqueue);
5640 * Allocate the target bus address array.
5642 np->targtbl = sym_calloc_dma(256, "TARGTBL");
5645 np->targtbl_ba = vtobus(np->targtbl);
5648 * Allocate SCRIPTS areas.
5650 np->scripta0 = sym_calloc_dma(np->scripta_sz, "SCRIPTA0");
5651 np->scriptb0 = sym_calloc_dma(np->scriptb_sz, "SCRIPTB0");
5652 np->scriptz0 = sym_calloc_dma(np->scriptz_sz, "SCRIPTZ0");
5653 if (!np->scripta0 || !np->scriptb0 || !np->scriptz0)
5657 * Allocate the array of lists of CCBs hashed by DSA.
5659 np->ccbh = kcalloc(CCB_HASH_SIZE, sizeof(struct sym_ccb **), GFP_KERNEL);
5664 * Initialyze the CCB free and busy queues.
5666 sym_que_init(&np->free_ccbq);
5667 sym_que_init(&np->busy_ccbq);
5668 sym_que_init(&np->comp_ccbq);
5671 * Initialization for optional handling
5672 * of device queueing.
5674 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5675 sym_que_init(&np->dummy_ccbq);
5678 * Allocate some CCB. We need at least ONE.
5680 if (!sym_alloc_ccb(np))
5684 * Calculate BUS addresses where we are going
5685 * to load the SCRIPTS.
5687 np->scripta_ba = vtobus(np->scripta0);
5688 np->scriptb_ba = vtobus(np->scriptb0);
5689 np->scriptz_ba = vtobus(np->scriptz0);
5692 np->scripta_ba = np->ram_ba;
5693 if (np->features & FE_RAM8K) {
5694 np->scriptb_ba = np->scripta_ba + 4096;
5695 #if 0 /* May get useful for 64 BIT PCI addressing */
5696 np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32);
5702 * Copy scripts to controller instance.
5704 memcpy(np->scripta0, fw->a_base, np->scripta_sz);
5705 memcpy(np->scriptb0, fw->b_base, np->scriptb_sz);
5706 memcpy(np->scriptz0, fw->z_base, np->scriptz_sz);
5709 * Setup variable parts in scripts and compute
5710 * scripts bus addresses used from the C code.
5712 np->fw_setup(np, fw);
5715 * Bind SCRIPTS with physical addresses usable by the
5716 * SCRIPTS processor (as seen from the BUS = BUS addresses).
5718 sym_fw_bind_script(np, (u32 *) np->scripta0, np->scripta_sz);
5719 sym_fw_bind_script(np, (u32 *) np->scriptb0, np->scriptb_sz);
5720 sym_fw_bind_script(np, (u32 *) np->scriptz0, np->scriptz_sz);
5722 #ifdef SYM_CONF_IARB_SUPPORT
5724 * If user wants IARB to be set when we win arbitration
5725 * and have other jobs, compute the max number of consecutive
5726 * settings of IARB hints before we leave devices a chance to
5727 * arbitrate for reselection.
5729 #ifdef SYM_SETUP_IARB_MAX
5730 np->iarb_max = SYM_SETUP_IARB_MAX;
5737 * Prepare the idle and invalid task actions.
5739 np->idletask.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5740 np->idletask.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5741 np->idletask_ba = vtobus(&np->idletask);
5743 np->notask.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5744 np->notask.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5745 np->notask_ba = vtobus(&np->notask);
5747 np->bad_itl.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5748 np->bad_itl.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5749 np->bad_itl_ba = vtobus(&np->bad_itl);
5751 np->bad_itlq.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5752 np->bad_itlq.restart = cpu_to_scr(SCRIPTB_BA(np,bad_i_t_l_q));
5753 np->bad_itlq_ba = vtobus(&np->bad_itlq);
5756 * Allocate and prepare the lun JUMP table that is used
5757 * for a target prior the probing of devices (bad lun table).
5758 * A private table will be allocated for the target on the
5759 * first INQUIRY response received.
5761 np->badluntbl = sym_calloc_dma(256, "BADLUNTBL");
5765 np->badlun_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5766 memset32(np->badluntbl, cpu_to_scr(vtobus(&np->badlun_sa)), 64);
5769 * Prepare the bus address array that contains the bus
5770 * address of each target control block.
5771 * For now, assume all logical units are wrong. :)
5773 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
5774 np->targtbl[i] = cpu_to_scr(vtobus(&np->target[i]));
5775 np->target[i].head.luntbl_sa =
5776 cpu_to_scr(vtobus(np->badluntbl));
5777 np->target[i].head.lun0_sa =
5778 cpu_to_scr(vtobus(&np->badlun_sa));
5782 * Now check the cache handling of the pci chipset.
5784 if (sym_snooptest (np)) {
5785 printf("%s: CACHE INCORRECTLY CONFIGURED.\n", sym_name(np));
5790 * Sigh! we are done.
5799 * Free everything that has been allocated for this device.
5801 void sym_hcb_free(struct sym_hcb *np)
5809 sym_mfree_dma(np->scriptz0, np->scriptz_sz, "SCRIPTZ0");
5811 sym_mfree_dma(np->scriptb0, np->scriptb_sz, "SCRIPTB0");
5813 sym_mfree_dma(np->scripta0, np->scripta_sz, "SCRIPTA0");
5815 sym_mfree_dma(np->squeue, sizeof(u32)*(MAX_QUEUE*2), "SQUEUE");
5817 sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE");
5820 while ((qp = sym_remque_head(&np->free_ccbq)) != NULL) {
5821 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5822 sym_mfree_dma(cp, sizeof(*cp), "CCB");
5828 sym_mfree_dma(np->badluntbl, 256,"BADLUNTBL");
5830 for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) {
5831 tp = &np->target[target];
5833 sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
5834 #if SYM_CONF_MAX_LUN > 1
5839 sym_mfree_dma(np->targtbl, 256, "TARGTBL");
projects / linux-2.6-microblaze.git / blob