Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
[linux-2.6-microblaze.git] / drivers / scsi / qla2xxx / qla_fw.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * QLogic Fibre Channel HBA Driver
4  * Copyright (c)  2003-2014 QLogic Corporation
5  */
6 #ifndef __QLA_FW_H
7 #define __QLA_FW_H
8
9 #include <linux/nvme.h>
10 #include <linux/nvme-fc.h>
11
12 #include "qla_dsd.h"
13
14 #define MBS_CHECKSUM_ERROR      0x4010
15 #define MBS_INVALID_PRODUCT_KEY 0x4020
16
17 /*
18  * Firmware Options.
19  */
20 #define FO1_ENABLE_PUREX        BIT_10
21 #define FO1_DISABLE_LED_CTRL    BIT_6
22 #define FO1_ENABLE_8016         BIT_0
23 #define FO2_ENABLE_SEL_CLASS2   BIT_5
24 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14
25 #define FO3_HOLD_STS_IOCB       BIT_12
26
27 /*
28  * Port Database structure definition for ISP 24xx.
29  */
30 #define PDO_FORCE_ADISC         BIT_1
31 #define PDO_FORCE_PLOGI         BIT_0
32
33 struct buffer_credit_24xx {
34         u32 parameter[28];
35 };
36
37 #define PORT_DATABASE_24XX_SIZE         64
38 struct port_database_24xx {
39         uint16_t flags;
40 #define PDF_TASK_RETRY_ID       BIT_14
41 #define PDF_FC_TAPE             BIT_7
42 #define PDF_ACK0_CAPABLE        BIT_6
43 #define PDF_FCP2_CONF           BIT_5
44 #define PDF_CLASS_2             BIT_4
45 #define PDF_HARD_ADDR           BIT_1
46
47         /*
48          * for NVMe, the login_state field has been
49          * split into nibbles.
50          * The lower nibble is for FCP.
51          * The upper nibble is for NVMe.
52          */
53         uint8_t current_login_state;
54         uint8_t last_login_state;
55 #define PDS_PLOGI_PENDING       0x03
56 #define PDS_PLOGI_COMPLETE      0x04
57 #define PDS_PRLI_PENDING        0x05
58 #define PDS_PRLI_COMPLETE       0x06
59 #define PDS_PORT_UNAVAILABLE    0x07
60 #define PDS_PRLO_PENDING        0x09
61 #define PDS_LOGO_PENDING        0x11
62 #define PDS_PRLI2_PENDING       0x12
63
64         uint8_t hard_address[3];
65         uint8_t reserved_1;
66
67         uint8_t port_id[3];
68         uint8_t sequence_id;
69
70         uint16_t port_timer;
71
72         uint16_t nport_handle;                  /* N_PORT handle. */
73
74         uint16_t receive_data_size;
75         uint16_t reserved_2;
76
77         uint8_t prli_svc_param_word_0[2];       /* Big endian */
78                                                 /* Bits 15-0 of word 0 */
79         uint8_t prli_svc_param_word_3[2];       /* Big endian */
80                                                 /* Bits 15-0 of word 3 */
81
82         uint8_t port_name[WWN_SIZE];
83         uint8_t node_name[WWN_SIZE];
84
85         uint8_t reserved_3[4];
86         uint16_t prli_nvme_svc_param_word_0;    /* Bits 15-0 of word 0 */
87         uint16_t prli_nvme_svc_param_word_3;    /* Bits 15-0 of word 3 */
88         uint16_t nvme_first_burst_size;
89         uint8_t reserved_4[14];
90 };
91
92 /*
93  * MB 75h returns a list of DB entries similar to port_database_24xx(64B).
94  * However, in this case it returns 1st 40 bytes.
95  */
96 struct get_name_list_extended {
97         __le16 flags;
98         u8 current_login_state;
99         u8 last_login_state;
100         u8 hard_address[3];
101         u8 reserved_1;
102         u8 port_id[3];
103         u8 sequence_id;
104         __le16 port_timer;
105         __le16 nport_handle;                    /* N_PORT handle. */
106         __le16 receive_data_size;
107         __le16 reserved_2;
108
109         /* PRLI SVC Param are Big endian */
110         u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */
111         u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */
112         u8 port_name[WWN_SIZE];
113         u8 node_name[WWN_SIZE];
114 };
115
116 /* MB 75h: This is the short version of the database */
117 struct get_name_list {
118         u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */
119         __le16 nport_handle;
120         u8 reserved;
121 };
122
123 struct vp_database_24xx {
124         uint16_t vp_status;
125         uint8_t  options;
126         uint8_t  id;
127         uint8_t  port_name[WWN_SIZE];
128         uint8_t  node_name[WWN_SIZE];
129         uint16_t port_id_low;
130         uint16_t port_id_high;
131 };
132
133 struct nvram_24xx {
134         /* NVRAM header. */
135         uint8_t id[4];
136         __le16  nvram_version;
137         uint16_t reserved_0;
138
139         /* Firmware Initialization Control Block. */
140         __le16  version;
141         uint16_t reserved_1;
142         __le16  frame_payload_size;
143         __le16  execution_throttle;
144         __le16  exchange_count;
145         __le16  hard_address;
146
147         uint8_t port_name[WWN_SIZE];
148         uint8_t node_name[WWN_SIZE];
149
150         __le16  login_retry_count;
151         __le16  link_down_on_nos;
152         __le16  interrupt_delay_timer;
153         __le16  login_timeout;
154
155         __le32  firmware_options_1;
156         __le32  firmware_options_2;
157         __le32  firmware_options_3;
158
159         /* Offset 56. */
160
161         /*
162          * BIT 0     = Control Enable
163          * BIT 1-15  =
164          *
165          * BIT 0-7   = Reserved
166          * BIT 8-10  = Output Swing 1G
167          * BIT 11-13 = Output Emphasis 1G
168          * BIT 14-15 = Reserved
169          *
170          * BIT 0-7   = Reserved
171          * BIT 8-10  = Output Swing 2G
172          * BIT 11-13 = Output Emphasis 2G
173          * BIT 14-15 = Reserved
174          *
175          * BIT 0-7   = Reserved
176          * BIT 8-10  = Output Swing 4G
177          * BIT 11-13 = Output Emphasis 4G
178          * BIT 14-15 = Reserved
179          */
180         __le16  seriallink_options[4];
181
182         uint16_t reserved_2[16];
183
184         /* Offset 96. */
185         uint16_t reserved_3[16];
186
187         /* PCIe table entries. */
188         uint16_t reserved_4[16];
189
190         /* Offset 160. */
191         uint16_t reserved_5[16];
192
193         /* Offset 192. */
194         uint16_t reserved_6[16];
195
196         /* Offset 224. */
197         uint16_t reserved_7[16];
198
199         /*
200          * BIT 0  = Enable spinup delay
201          * BIT 1  = Disable BIOS
202          * BIT 2  = Enable Memory Map BIOS
203          * BIT 3  = Enable Selectable Boot
204          * BIT 4  = Disable RISC code load
205          * BIT 5  = Disable Serdes
206          * BIT 6  =
207          * BIT 7  =
208          *
209          * BIT 8  =
210          * BIT 9  =
211          * BIT 10 = Enable lip full login
212          * BIT 11 = Enable target reset
213          * BIT 12 =
214          * BIT 13 =
215          * BIT 14 =
216          * BIT 15 = Enable alternate WWN
217          *
218          * BIT 16-31 =
219          */
220         __le32  host_p;
221
222         uint8_t alternate_port_name[WWN_SIZE];
223         uint8_t alternate_node_name[WWN_SIZE];
224
225         uint8_t boot_port_name[WWN_SIZE];
226         __le16  boot_lun_number;
227         uint16_t reserved_8;
228
229         uint8_t alt1_boot_port_name[WWN_SIZE];
230         __le16  alt1_boot_lun_number;
231         uint16_t reserved_9;
232
233         uint8_t alt2_boot_port_name[WWN_SIZE];
234         __le16  alt2_boot_lun_number;
235         uint16_t reserved_10;
236
237         uint8_t alt3_boot_port_name[WWN_SIZE];
238         __le16  alt3_boot_lun_number;
239         uint16_t reserved_11;
240
241         /*
242          * BIT 0 = Selective Login
243          * BIT 1 = Alt-Boot Enable
244          * BIT 2 = Reserved
245          * BIT 3 = Boot Order List
246          * BIT 4 = Reserved
247          * BIT 5 = Selective LUN
248          * BIT 6 = Reserved
249          * BIT 7-31 =
250          */
251         __le32  efi_parameters;
252
253         uint8_t reset_delay;
254         uint8_t reserved_12;
255         uint16_t reserved_13;
256
257         __le16  boot_id_number;
258         uint16_t reserved_14;
259
260         __le16  max_luns_per_target;
261         uint16_t reserved_15;
262
263         __le16  port_down_retry_count;
264         __le16  link_down_timeout;
265
266         /* FCode parameters. */
267         __le16  fcode_parameter;
268
269         uint16_t reserved_16[3];
270
271         /* Offset 352. */
272         uint8_t prev_drv_ver_major;
273         uint8_t prev_drv_ver_submajob;
274         uint8_t prev_drv_ver_minor;
275         uint8_t prev_drv_ver_subminor;
276
277         __le16  prev_bios_ver_major;
278         __le16  prev_bios_ver_minor;
279
280         __le16  prev_efi_ver_major;
281         __le16  prev_efi_ver_minor;
282
283         __le16  prev_fw_ver_major;
284         uint8_t prev_fw_ver_minor;
285         uint8_t prev_fw_ver_subminor;
286
287         uint16_t reserved_17[8];
288
289         /* Offset 384. */
290         uint16_t reserved_18[16];
291
292         /* Offset 416. */
293         uint16_t reserved_19[16];
294
295         /* Offset 448. */
296         uint16_t reserved_20[16];
297
298         /* Offset 480. */
299         uint8_t model_name[16];
300
301         uint16_t reserved_21[2];
302
303         /* Offset 500. */
304         /* HW Parameter Block. */
305         uint16_t pcie_table_sig;
306         uint16_t pcie_table_offset;
307
308         uint16_t subsystem_vendor_id;
309         uint16_t subsystem_device_id;
310
311         __le32  checksum;
312 };
313
314 /*
315  * ISP Initialization Control Block.
316  * Little endian except where noted.
317  */
318 #define ICB_VERSION 1
319 struct init_cb_24xx {
320         __le16  version;
321         uint16_t reserved_1;
322
323         __le16  frame_payload_size;
324         __le16  execution_throttle;
325         __le16  exchange_count;
326
327         __le16  hard_address;
328
329         uint8_t port_name[WWN_SIZE];            /* Big endian. */
330         uint8_t node_name[WWN_SIZE];            /* Big endian. */
331
332         __le16  response_q_inpointer;
333         __le16  request_q_outpointer;
334
335         __le16  login_retry_count;
336
337         __le16  prio_request_q_outpointer;
338
339         __le16  response_q_length;
340         __le16  request_q_length;
341
342         __le16  link_down_on_nos;               /* Milliseconds. */
343
344         __le16  prio_request_q_length;
345
346         __le64   request_q_address __packed;
347         __le64   response_q_address __packed;
348         __le64   prio_request_q_address __packed;
349
350         __le16  msix;
351         __le16  msix_atio;
352         uint8_t reserved_2[4];
353
354         __le16  atio_q_inpointer;
355         __le16  atio_q_length;
356         __le64  atio_q_address __packed;
357
358         __le16  interrupt_delay_timer;          /* 100us increments. */
359         __le16  login_timeout;
360
361         /*
362          * BIT 0  = Enable Hard Loop Id
363          * BIT 1  = Enable Fairness
364          * BIT 2  = Enable Full-Duplex
365          * BIT 3  = Reserved
366          * BIT 4  = Enable Target Mode
367          * BIT 5  = Disable Initiator Mode
368          * BIT 6  = Acquire FA-WWN
369          * BIT 7  = Enable D-port Diagnostics
370          *
371          * BIT 8  = Reserved
372          * BIT 9  = Non Participating LIP
373          * BIT 10 = Descending Loop ID Search
374          * BIT 11 = Acquire Loop ID in LIPA
375          * BIT 12 = Reserved
376          * BIT 13 = Full Login after LIP
377          * BIT 14 = Node Name Option
378          * BIT 15-31 = Reserved
379          */
380         __le32  firmware_options_1;
381
382         /*
383          * BIT 0  = Operation Mode bit 0
384          * BIT 1  = Operation Mode bit 1
385          * BIT 2  = Operation Mode bit 2
386          * BIT 3  = Operation Mode bit 3
387          * BIT 4  = Connection Options bit 0
388          * BIT 5  = Connection Options bit 1
389          * BIT 6  = Connection Options bit 2
390          * BIT 7  = Enable Non part on LIHA failure
391          *
392          * BIT 8  = Enable Class 2
393          * BIT 9  = Enable ACK0
394          * BIT 10 = Reserved
395          * BIT 11 = Enable FC-SP Security
396          * BIT 12 = FC Tape Enable
397          * BIT 13 = Reserved
398          * BIT 14 = Enable Target PRLI Control
399          * BIT 15-31 = Reserved
400          */
401         __le32  firmware_options_2;
402
403         /*
404          * BIT 0  = Reserved
405          * BIT 1  = Soft ID only
406          * BIT 2  = Reserved
407          * BIT 3  = Reserved
408          * BIT 4  = FCP RSP Payload bit 0
409          * BIT 5  = FCP RSP Payload bit 1
410          * BIT 6  = Enable Receive Out-of-Order data frame handling
411          * BIT 7  = Disable Automatic PLOGI on Local Loop
412          *
413          * BIT 8  = Reserved
414          * BIT 9  = Enable Out-of-Order FCP_XFER_RDY relative offset handling
415          * BIT 10 = Reserved
416          * BIT 11 = Reserved
417          * BIT 12 = Reserved
418          * BIT 13 = Data Rate bit 0
419          * BIT 14 = Data Rate bit 1
420          * BIT 15 = Data Rate bit 2
421          * BIT 16 = Enable 75 ohm Termination Select
422          * BIT 17-28 = Reserved
423          * BIT 29 = Enable response queue 0 in index shadowing
424          * BIT 30 = Enable request queue 0 out index shadowing
425          * BIT 31 = Reserved
426          */
427         __le32  firmware_options_3;
428         __le16   qos;
429         __le16   rid;
430         uint8_t  reserved_3[20];
431 };
432
433 /*
434  * ISP queue - command entry structure definition.
435  */
436 #define COMMAND_BIDIRECTIONAL 0x75
437 struct cmd_bidir {
438         uint8_t entry_type;             /* Entry type. */
439         uint8_t entry_count;            /* Entry count. */
440         uint8_t sys_define;             /* System defined */
441         uint8_t entry_status;           /* Entry status. */
442
443         uint32_t handle;                /* System handle. */
444
445         __le16  nport_handle;           /* N_PORT handle. */
446
447         __le16  timeout;                /* Command timeout. */
448
449         __le16  wr_dseg_count;          /* Write Data segment count. */
450         __le16  rd_dseg_count;          /* Read Data segment count. */
451
452         struct scsi_lun lun;            /* FCP LUN (BE). */
453
454         __le16  control_flags;          /* Control flags. */
455 #define BD_WRAP_BACK                    BIT_3
456 #define BD_READ_DATA                    BIT_1
457 #define BD_WRITE_DATA                   BIT_0
458
459         __le16  fcp_cmnd_dseg_len;              /* Data segment length. */
460         __le64   fcp_cmnd_dseg_address __packed;/* Data segment address. */
461
462         uint16_t reserved[2];                   /* Reserved */
463
464         __le32  rd_byte_count;                  /* Total Byte count Read. */
465         __le32  wr_byte_count;                  /* Total Byte count write. */
466
467         uint8_t port_id[3];                     /* PortID of destination port.*/
468         uint8_t vp_index;
469
470         struct dsd64 fcp_dsd;
471 };
472
473 #define COMMAND_TYPE_6  0x48            /* Command Type 6 entry */
474 struct cmd_type_6 {
475         uint8_t entry_type;             /* Entry type. */
476         uint8_t entry_count;            /* Entry count. */
477         uint8_t sys_define;             /* System defined. */
478         uint8_t entry_status;           /* Entry Status. */
479
480         uint32_t handle;                /* System handle. */
481
482         __le16  nport_handle;           /* N_PORT handle. */
483         __le16  timeout;                /* Command timeout. */
484
485         __le16  dseg_count;             /* Data segment count. */
486
487         __le16  fcp_rsp_dsd_len;        /* FCP_RSP DSD length. */
488
489         struct scsi_lun lun;            /* FCP LUN (BE). */
490
491         __le16  control_flags;          /* Control flags. */
492 #define CF_DIF_SEG_DESCR_ENABLE         BIT_3
493 #define CF_DATA_SEG_DESCR_ENABLE        BIT_2
494 #define CF_READ_DATA                    BIT_1
495 #define CF_WRITE_DATA                   BIT_0
496
497         __le16  fcp_cmnd_dseg_len;      /* Data segment length. */
498                                         /* Data segment address. */
499         __le64   fcp_cmnd_dseg_address __packed;
500                                         /* Data segment address. */
501         __le64   fcp_rsp_dseg_address __packed;
502
503         __le32  byte_count;             /* Total byte count. */
504
505         uint8_t port_id[3];             /* PortID of destination port. */
506         uint8_t vp_index;
507
508         struct dsd64 fcp_dsd;
509 };
510
511 #define COMMAND_TYPE_7  0x18            /* Command Type 7 entry */
512 struct cmd_type_7 {
513         uint8_t entry_type;             /* Entry type. */
514         uint8_t entry_count;            /* Entry count. */
515         uint8_t sys_define;             /* System defined. */
516         uint8_t entry_status;           /* Entry Status. */
517
518         uint32_t handle;                /* System handle. */
519
520         __le16  nport_handle;           /* N_PORT handle. */
521         __le16  timeout;                /* Command timeout. */
522 #define FW_MAX_TIMEOUT          0x1999
523
524         __le16  dseg_count;             /* Data segment count. */
525         uint16_t reserved_1;
526
527         struct scsi_lun lun;            /* FCP LUN (BE). */
528
529         __le16  task_mgmt_flags;        /* Task management flags. */
530 #define TMF_CLEAR_ACA           BIT_14
531 #define TMF_TARGET_RESET        BIT_13
532 #define TMF_LUN_RESET           BIT_12
533 #define TMF_CLEAR_TASK_SET      BIT_10
534 #define TMF_ABORT_TASK_SET      BIT_9
535 #define TMF_DSD_LIST_ENABLE     BIT_2
536 #define TMF_READ_DATA           BIT_1
537 #define TMF_WRITE_DATA          BIT_0
538
539         uint8_t task;
540 #define TSK_SIMPLE              0
541 #define TSK_HEAD_OF_QUEUE       1
542 #define TSK_ORDERED             2
543 #define TSK_ACA                 4
544 #define TSK_UNTAGGED            5
545
546         uint8_t crn;
547
548         uint8_t fcp_cdb[MAX_CMDSZ];     /* SCSI command words. */
549         __le32  byte_count;             /* Total byte count. */
550
551         uint8_t port_id[3];             /* PortID of destination port. */
552         uint8_t vp_index;
553
554         struct dsd64 dsd;
555 };
556
557 #define COMMAND_TYPE_CRC_2      0x6A    /* Command Type CRC_2 (Type 6)
558                                          * (T10-DIF) */
559 struct cmd_type_crc_2 {
560         uint8_t entry_type;             /* Entry type. */
561         uint8_t entry_count;            /* Entry count. */
562         uint8_t sys_define;             /* System defined. */
563         uint8_t entry_status;           /* Entry Status. */
564
565         uint32_t handle;                /* System handle. */
566
567         __le16  nport_handle;           /* N_PORT handle. */
568         __le16  timeout;                /* Command timeout. */
569
570         __le16  dseg_count;             /* Data segment count. */
571
572         __le16  fcp_rsp_dseg_len;       /* FCP_RSP DSD length. */
573
574         struct scsi_lun lun;            /* FCP LUN (BE). */
575
576         __le16  control_flags;          /* Control flags. */
577
578         __le16  fcp_cmnd_dseg_len;      /* Data segment length. */
579         __le64   fcp_cmnd_dseg_address __packed;
580                                         /* Data segment address. */
581         __le64   fcp_rsp_dseg_address __packed;
582
583         __le32  byte_count;             /* Total byte count. */
584
585         uint8_t port_id[3];             /* PortID of destination port. */
586         uint8_t vp_index;
587
588         __le64   crc_context_address __packed;  /* Data segment address. */
589         __le16  crc_context_len;                /* Data segment length. */
590         uint16_t reserved_1;                    /* MUST be set to 0. */
591 };
592
593
594 /*
595  * ISP queue - status entry structure definition.
596  */
597 #define STATUS_TYPE     0x03            /* Status entry. */
598 struct sts_entry_24xx {
599         uint8_t entry_type;             /* Entry type. */
600         uint8_t entry_count;            /* Entry count. */
601         uint8_t sys_define;             /* System defined. */
602         uint8_t entry_status;           /* Entry Status. */
603
604         uint32_t handle;                /* System handle. */
605
606         __le16  comp_status;            /* Completion status. */
607         __le16  ox_id;                  /* OX_ID used by the firmware. */
608
609         __le32  residual_len;           /* FW calc residual transfer length. */
610
611         union {
612                 __le16 reserved_1;
613                 __le16  nvme_rsp_pyld_len;
614         };
615
616         __le16  state_flags;            /* State flags. */
617 #define SF_TRANSFERRED_DATA     BIT_11
618 #define SF_NVME_ERSP            BIT_6
619 #define SF_FCP_RSP_DMA          BIT_0
620
621         __le16  status_qualifier;
622         __le16  scsi_status;            /* SCSI status. */
623 #define SS_CONFIRMATION_REQ             BIT_12
624
625         __le32  rsp_residual_count;     /* FCP RSP residual count. */
626
627         __le32  sense_len;              /* FCP SENSE length. */
628
629         union {
630                 struct {
631                         __le32  rsp_data_len;   /* FCP response data length  */
632                         uint8_t data[28];       /* FCP rsp/sense information */
633                 };
634                 struct nvme_fc_ersp_iu nvme_ersp;
635                 uint8_t nvme_ersp_data[32];
636         };
637
638         /*
639          * If DIF Error is set in comp_status, these additional fields are
640          * defined:
641          *
642          * !!! NOTE: Firmware sends expected/actual DIF data in big endian
643          * format; but all of the "data" field gets swab32-d in the beginning
644          * of qla2x00_status_entry().
645          *
646          * &data[10] : uint8_t report_runt_bg[2];       - computed guard
647          * &data[12] : uint8_t actual_dif[8];           - DIF Data received
648          * &data[20] : uint8_t expected_dif[8];         - DIF Data computed
649         */
650 };
651
652
653 /*
654  * Status entry completion status
655  */
656 #define CS_DATA_REASSEMBLY_ERROR 0x11   /* Data Reassembly Error.. */
657 #define CS_ABTS_BY_TARGET       0x13    /* Target send ABTS to abort IOCB. */
658 #define CS_FW_RESOURCE          0x2C    /* Firmware Resource Unavailable. */
659 #define CS_TASK_MGMT_OVERRUN    0x30    /* Task management overrun (8+). */
660 #define CS_ABORT_BY_TARGET      0x47    /* Abort By Target. */
661
662 /*
663  * ISP queue - marker entry structure definition.
664  */
665 #define MARKER_TYPE     0x04            /* Marker entry. */
666 struct mrk_entry_24xx {
667         uint8_t entry_type;             /* Entry type. */
668         uint8_t entry_count;            /* Entry count. */
669         uint8_t handle_count;           /* Handle count. */
670         uint8_t entry_status;           /* Entry Status. */
671
672         uint32_t handle;                /* System handle. */
673
674         __le16  nport_handle;           /* N_PORT handle. */
675
676         uint8_t modifier;               /* Modifier (7-0). */
677 #define MK_SYNC_ID_LUN  0               /* Synchronize ID/LUN */
678 #define MK_SYNC_ID      1               /* Synchronize ID */
679 #define MK_SYNC_ALL     2               /* Synchronize all ID/LUN */
680         uint8_t reserved_1;
681
682         uint8_t reserved_2;
683         uint8_t vp_index;
684
685         uint16_t reserved_3;
686
687         uint8_t lun[8];                 /* FCP LUN (BE). */
688         uint8_t reserved_4[40];
689 };
690
691 /*
692  * ISP queue - CT Pass-Through entry structure definition.
693  */
694 #define CT_IOCB_TYPE            0x29    /* CT Pass-Through IOCB entry */
695 struct ct_entry_24xx {
696         uint8_t entry_type;             /* Entry type. */
697         uint8_t entry_count;            /* Entry count. */
698         uint8_t sys_define;             /* System Defined. */
699         uint8_t entry_status;           /* Entry Status. */
700
701         uint32_t handle;                /* System handle. */
702
703         __le16  comp_status;            /* Completion status. */
704
705         __le16  nport_handle;           /* N_PORT handle. */
706
707         __le16  cmd_dsd_count;
708
709         uint8_t vp_index;
710         uint8_t reserved_1;
711
712         __le16  timeout;                /* Command timeout. */
713         uint16_t reserved_2;
714
715         __le16  rsp_dsd_count;
716
717         uint8_t reserved_3[10];
718
719         __le32  rsp_byte_count;
720         __le32  cmd_byte_count;
721
722         struct dsd64 dsd[2];
723 };
724
725 #define PURX_ELS_HEADER_SIZE    0x18
726
727 /*
728  * ISP queue - PUREX IOCB entry structure definition
729  */
730 #define PUREX_IOCB_TYPE         0x51    /* CT Pass Through IOCB entry */
731 struct purex_entry_24xx {
732         uint8_t entry_type;             /* Entry type. */
733         uint8_t entry_count;            /* Entry count. */
734         uint8_t sys_define;             /* System defined. */
735         uint8_t entry_status;           /* Entry Status. */
736
737         __le16  reserved1;
738         uint8_t vp_idx;
739         uint8_t reserved2;
740
741         __le16  status_flags;
742         __le16  nport_handle;
743
744         __le16  frame_size;
745         __le16  trunc_frame_size;
746
747         __le32  rx_xchg_addr;
748
749         uint8_t d_id[3];
750         uint8_t r_ctl;
751
752         uint8_t s_id[3];
753         uint8_t cs_ctl;
754
755         uint8_t f_ctl[3];
756         uint8_t type;
757
758         __le16  seq_cnt;
759         uint8_t df_ctl;
760         uint8_t seq_id;
761
762         __le16  rx_id;
763         __le16  ox_id;
764         __le32  param;
765
766         uint8_t els_frame_payload[20];
767 };
768
769 /*
770  * ISP queue - ELS Pass-Through entry structure definition.
771  */
772 #define ELS_IOCB_TYPE           0x53    /* ELS Pass-Through IOCB entry */
773 struct els_entry_24xx {
774         uint8_t entry_type;             /* Entry type. */
775         uint8_t entry_count;            /* Entry count. */
776         uint8_t sys_define;             /* System Defined. */
777         uint8_t entry_status;           /* Entry Status. */
778
779         uint32_t handle;                /* System handle. */
780
781         __le16  comp_status;            /* response only */
782         __le16  nport_handle;
783
784         __le16  tx_dsd_count;
785
786         uint8_t vp_index;
787         uint8_t sof_type;
788 #define EST_SOFI3               (1 << 4)
789 #define EST_SOFI2               (3 << 4)
790
791         __le32  rx_xchg_address;        /* Receive exchange address. */
792         __le16  rx_dsd_count;
793
794         uint8_t opcode;
795         uint8_t reserved_2;
796
797         uint8_t d_id[3];
798         uint8_t s_id[3];
799
800         __le16  control_flags;          /* Control flags. */
801 #define ECF_PAYLOAD_DESCR_MASK  (BIT_15|BIT_14|BIT_13)
802 #define EPD_ELS_COMMAND         (0 << 13)
803 #define EPD_ELS_ACC             (1 << 13)
804 #define EPD_ELS_RJT             (2 << 13)
805 #define EPD_RX_XCHG             (3 << 13)
806 #define ECF_CLR_PASSTHRU_PEND   BIT_12
807 #define ECF_INCL_FRAME_HDR      BIT_11
808
809         union {
810                 struct {
811                         __le32   rx_byte_count;
812                         __le32   tx_byte_count;
813
814                         __le64   tx_address __packed;   /* DSD 0 address. */
815                         __le32   tx_len;                /* DSD 0 length. */
816
817                         __le64   rx_address __packed;   /* DSD 1 address. */
818                         __le32   rx_len;                /* DSD 1 length. */
819                 };
820                 struct {
821                         __le32  total_byte_count;
822                         __le32  error_subcode_1;
823                         __le32  error_subcode_2;
824                         __le32  error_subcode_3;
825                 };
826         };
827 };
828
829 struct els_sts_entry_24xx {
830         uint8_t entry_type;             /* Entry type. */
831         uint8_t entry_count;            /* Entry count. */
832         uint8_t sys_define;             /* System Defined. */
833         uint8_t entry_status;           /* Entry Status. */
834
835         __le32  handle;         /* System handle. */
836
837         __le16  comp_status;
838
839         __le16  nport_handle;           /* N_PORT handle. */
840
841         __le16  reserved_1;
842
843         uint8_t vp_index;
844         uint8_t sof_type;
845
846         __le32  rx_xchg_address;        /* Receive exchange address. */
847         __le16  reserved_2;
848
849         uint8_t opcode;
850         uint8_t reserved_3;
851
852         uint8_t d_id[3];
853         uint8_t s_id[3];
854
855         __le16  control_flags;          /* Control flags. */
856         __le32  total_byte_count;
857         __le32  error_subcode_1;
858         __le32  error_subcode_2;
859         __le32  error_subcode_3;
860
861         __le32  reserved_4[4];
862 };
863 /*
864  * ISP queue - Mailbox Command entry structure definition.
865  */
866 #define MBX_IOCB_TYPE   0x39
867 struct mbx_entry_24xx {
868         uint8_t entry_type;             /* Entry type. */
869         uint8_t entry_count;            /* Entry count. */
870         uint8_t handle_count;           /* Handle count. */
871         uint8_t entry_status;           /* Entry Status. */
872
873         uint32_t handle;                /* System handle. */
874
875         uint16_t mbx[28];
876 };
877
878
879 #define LOGINOUT_PORT_IOCB_TYPE 0x52    /* Login/Logout Port entry. */
880 struct logio_entry_24xx {
881         uint8_t entry_type;             /* Entry type. */
882         uint8_t entry_count;            /* Entry count. */
883         uint8_t sys_define;             /* System defined. */
884         uint8_t entry_status;           /* Entry Status. */
885
886         uint32_t handle;                /* System handle. */
887
888         __le16  comp_status;            /* Completion status. */
889 #define CS_LOGIO_ERROR          0x31    /* Login/Logout IOCB error. */
890
891         __le16  nport_handle;           /* N_PORT handle. */
892
893         __le16  control_flags;          /* Control flags. */
894                                         /* Modifiers. */
895 #define LCF_INCLUDE_SNS         BIT_10  /* Include SNS (FFFFFC) during LOGO. */
896 #define LCF_FCP2_OVERRIDE       BIT_9   /* Set/Reset word 3 of PRLI. */
897 #define LCF_CLASS_2             BIT_8   /* Enable class 2 during PLOGI. */
898 #define LCF_FREE_NPORT          BIT_7   /* Release NPORT handle after LOGO. */
899 #define LCF_EXPL_LOGO           BIT_6   /* Perform an explicit LOGO. */
900 #define LCF_NVME_PRLI           BIT_6   /* Perform NVME FC4 PRLI */
901 #define LCF_SKIP_PRLI           BIT_5   /* Skip PRLI after PLOGI. */
902 #define LCF_IMPL_LOGO_ALL       BIT_5   /* Implicit LOGO to all ports. */
903 #define LCF_COND_PLOGI          BIT_4   /* PLOGI only if not logged-in. */
904 #define LCF_IMPL_LOGO           BIT_4   /* Perform an implicit LOGO. */
905 #define LCF_IMPL_PRLO           BIT_4   /* Perform an implicit PRLO. */
906                                         /* Commands. */
907 #define LCF_COMMAND_PLOGI       0x00    /* PLOGI. */
908 #define LCF_COMMAND_PRLI        0x01    /* PRLI. */
909 #define LCF_COMMAND_PDISC       0x02    /* PDISC. */
910 #define LCF_COMMAND_ADISC       0x03    /* ADISC. */
911 #define LCF_COMMAND_LOGO        0x08    /* LOGO. */
912 #define LCF_COMMAND_PRLO        0x09    /* PRLO. */
913 #define LCF_COMMAND_TPRLO       0x0A    /* TPRLO. */
914
915         uint8_t vp_index;
916         uint8_t reserved_1;
917
918         uint8_t port_id[3];             /* PortID of destination port. */
919
920         uint8_t rsp_size;               /* Response size in 32bit words. */
921
922         __le32  io_parameter[11];       /* General I/O parameters. */
923 #define LSC_SCODE_NOLINK        0x01
924 #define LSC_SCODE_NOIOCB        0x02
925 #define LSC_SCODE_NOXCB         0x03
926 #define LSC_SCODE_CMD_FAILED    0x04
927 #define LSC_SCODE_NOFABRIC      0x05
928 #define LSC_SCODE_FW_NOT_READY  0x07
929 #define LSC_SCODE_NOT_LOGGED_IN 0x09
930 #define LSC_SCODE_NOPCB         0x0A
931
932 #define LSC_SCODE_ELS_REJECT    0x18
933 #define LSC_SCODE_CMD_PARAM_ERR 0x19
934 #define LSC_SCODE_PORTID_USED   0x1A
935 #define LSC_SCODE_NPORT_USED    0x1B
936 #define LSC_SCODE_NONPORT       0x1C
937 #define LSC_SCODE_LOGGED_IN     0x1D
938 #define LSC_SCODE_NOFLOGI_ACC   0x1F
939 };
940
941 #define TSK_MGMT_IOCB_TYPE      0x14
942 struct tsk_mgmt_entry {
943         uint8_t entry_type;             /* Entry type. */
944         uint8_t entry_count;            /* Entry count. */
945         uint8_t handle_count;           /* Handle count. */
946         uint8_t entry_status;           /* Entry Status. */
947
948         uint32_t handle;                /* System handle. */
949
950         __le16  nport_handle;           /* N_PORT handle. */
951
952         uint16_t reserved_1;
953
954         __le16  delay;                  /* Activity delay in seconds. */
955
956         __le16  timeout;                /* Command timeout. */
957
958         struct scsi_lun lun;            /* FCP LUN (BE). */
959
960         __le32  control_flags;          /* Control Flags. */
961 #define TCF_NOTMCMD_TO_TARGET   BIT_31
962 #define TCF_LUN_RESET           BIT_4
963 #define TCF_ABORT_TASK_SET      BIT_3
964 #define TCF_CLEAR_TASK_SET      BIT_2
965 #define TCF_TARGET_RESET        BIT_1
966 #define TCF_CLEAR_ACA           BIT_0
967
968         uint8_t reserved_2[20];
969
970         uint8_t port_id[3];             /* PortID of destination port. */
971         uint8_t vp_index;
972
973         uint8_t reserved_3[12];
974 };
975
976 #define ABORT_IOCB_TYPE 0x33
977 struct abort_entry_24xx {
978         uint8_t entry_type;             /* Entry type. */
979         uint8_t entry_count;            /* Entry count. */
980         uint8_t handle_count;           /* Handle count. */
981         uint8_t entry_status;           /* Entry Status. */
982
983         uint32_t handle;                /* System handle. */
984
985         union {
986                 __le16 nport_handle;            /* N_PORT handle. */
987                 __le16 comp_status;             /* Completion status. */
988         };
989
990         __le16  options;                /* Options. */
991 #define AOF_NO_ABTS             BIT_0   /* Do not send any ABTS. */
992 #define AOF_NO_RRQ              BIT_1   /* Do not send RRQ. */
993 #define AOF_ABTS_TIMEOUT        BIT_2   /* Disable logout on ABTS timeout. */
994 #define AOF_ABTS_RTY_CNT        BIT_3   /* Use driver specified retry count. */
995 #define AOF_RSP_TIMEOUT         BIT_4   /* Use specified response timeout. */
996
997
998         uint32_t handle_to_abort;       /* System handle to abort. */
999
1000         __le16  req_que_no;
1001         uint8_t reserved_1[30];
1002
1003         uint8_t port_id[3];             /* PortID of destination port. */
1004         uint8_t vp_index;
1005         u8      reserved_2[4];
1006         union {
1007                 struct {
1008                         __le16 abts_rty_cnt;
1009                         __le16 rsp_timeout;
1010                 } drv;
1011                 struct {
1012                         u8      ba_rjt_vendorUnique;
1013                         u8      ba_rjt_reasonCodeExpl;
1014                         u8      ba_rjt_reasonCode;
1015                         u8      reserved_3;
1016                 } fw;
1017         };
1018         u8      reserved_4[4];
1019 };
1020
1021 #define ABTS_RCV_TYPE           0x54
1022 #define ABTS_RSP_TYPE           0x55
1023 struct abts_entry_24xx {
1024         uint8_t entry_type;
1025         uint8_t entry_count;
1026         uint8_t handle_count;
1027         uint8_t entry_status;
1028
1029         __le32  handle;         /* type 0x55 only */
1030
1031         __le16  comp_status;            /* type 0x55 only */
1032         __le16  nport_handle;           /* type 0x54 only */
1033
1034         __le16  control_flags;          /* type 0x55 only */
1035         uint8_t vp_idx;
1036         uint8_t sof_type;               /* sof_type is upper nibble */
1037
1038         __le32  rx_xch_addr;
1039
1040         uint8_t d_id[3];
1041         uint8_t r_ctl;
1042
1043         uint8_t s_id[3];
1044         uint8_t cs_ctl;
1045
1046         uint8_t f_ctl[3];
1047         uint8_t type;
1048
1049         __le16  seq_cnt;
1050         uint8_t df_ctl;
1051         uint8_t seq_id;
1052
1053         __le16  rx_id;
1054         __le16  ox_id;
1055
1056         __le32  param;
1057
1058         union {
1059                 struct {
1060                         __le32  subcode3;
1061                         __le32  rsvd;
1062                         __le32  subcode1;
1063                         __le32  subcode2;
1064                 } error;
1065                 struct {
1066                         __le16  rsrvd1;
1067                         uint8_t last_seq_id;
1068                         uint8_t seq_id_valid;
1069                         __le16  aborted_rx_id;
1070                         __le16  aborted_ox_id;
1071                         __le16  high_seq_cnt;
1072                         __le16  low_seq_cnt;
1073                 } ba_acc;
1074                 struct {
1075                         uint8_t vendor_unique;
1076                         uint8_t explanation;
1077                         uint8_t reason;
1078                 } ba_rjt;
1079         } payload;
1080
1081         __le32  rx_xch_addr_to_abort;
1082 } __packed;
1083
1084 /* ABTS payload explanation values */
1085 #define BA_RJT_EXP_NO_ADDITIONAL        0
1086 #define BA_RJT_EXP_INV_OX_RX_ID         3
1087 #define BA_RJT_EXP_SEQ_ABORTED          5
1088
1089 /* ABTS payload reason values */
1090 #define BA_RJT_RSN_INV_CMD_CODE         1
1091 #define BA_RJT_RSN_LOGICAL_ERROR        3
1092 #define BA_RJT_RSN_LOGICAL_BUSY         5
1093 #define BA_RJT_RSN_PROTOCOL_ERROR       7
1094 #define BA_RJT_RSN_UNABLE_TO_PERFORM    9
1095 #define BA_RJT_RSN_VENDOR_SPECIFIC      0xff
1096
1097 /* FC_F values */
1098 #define FC_TYPE_BLD             0x000           /* Basic link data */
1099 #define FC_F_CTL_RSP_CNTXT      0x800000        /* Responder of exchange */
1100 #define FC_F_CTL_LAST_SEQ       0x100000        /* Last sequence */
1101 #define FC_F_CTL_END_SEQ        0x80000         /* Last sequence */
1102 #define FC_F_CTL_SEQ_INIT       0x010000        /* Sequence initiative */
1103 #define FC_ROUTING_BLD          0x80            /* Basic link data frame */
1104 #define FC_R_CTL_BLD_BA_ACC     0x04            /* BA_ACC (basic accept) */
1105
1106 /*
1107  * ISP I/O Register Set structure definitions.
1108  */
1109 struct device_reg_24xx {
1110         __le32  flash_addr;             /* Flash/NVRAM BIOS address. */
1111 #define FARX_DATA_FLAG  BIT_31
1112 #define FARX_ACCESS_FLASH_CONF  0x7FFD0000
1113 #define FARX_ACCESS_FLASH_DATA  0x7FF00000
1114 #define FARX_ACCESS_NVRAM_CONF  0x7FFF0000
1115 #define FARX_ACCESS_NVRAM_DATA  0x7FFE0000
1116
1117 #define FA_NVRAM_FUNC0_ADDR     0x80
1118 #define FA_NVRAM_FUNC1_ADDR     0x180
1119
1120 #define FA_NVRAM_VPD_SIZE       0x200
1121 #define FA_NVRAM_VPD0_ADDR      0x00
1122 #define FA_NVRAM_VPD1_ADDR      0x100
1123
1124 #define FA_BOOT_CODE_ADDR       0x00000
1125                                         /*
1126                                          * RISC code begins at offset 512KB
1127                                          * within flash. Consisting of two
1128                                          * contiguous RISC code segments.
1129                                          */
1130 #define FA_RISC_CODE_ADDR       0x20000
1131 #define FA_RISC_CODE_SEGMENTS   2
1132
1133 #define FA_FLASH_DESCR_ADDR_24  0x11000
1134 #define FA_FLASH_LAYOUT_ADDR_24 0x11400
1135 #define FA_NPIV_CONF0_ADDR_24   0x16000
1136 #define FA_NPIV_CONF1_ADDR_24   0x17000
1137
1138 #define FA_FW_AREA_ADDR         0x40000
1139 #define FA_VPD_NVRAM_ADDR       0x48000
1140 #define FA_FEATURE_ADDR         0x4C000
1141 #define FA_FLASH_DESCR_ADDR     0x50000
1142 #define FA_FLASH_LAYOUT_ADDR    0x50400
1143 #define FA_HW_EVENT0_ADDR       0x54000
1144 #define FA_HW_EVENT1_ADDR       0x54400
1145 #define FA_HW_EVENT_SIZE        0x200
1146 #define FA_HW_EVENT_ENTRY_SIZE  4
1147 #define FA_NPIV_CONF0_ADDR      0x5C000
1148 #define FA_NPIV_CONF1_ADDR      0x5D000
1149 #define FA_FCP_PRIO0_ADDR       0x10000
1150 #define FA_FCP_PRIO1_ADDR       0x12000
1151
1152 /*
1153  * Flash Error Log Event Codes.
1154  */
1155 #define HW_EVENT_RESET_ERR      0xF00B
1156 #define HW_EVENT_ISP_ERR        0xF020
1157 #define HW_EVENT_PARITY_ERR     0xF022
1158 #define HW_EVENT_NVRAM_CHKSUM_ERR       0xF023
1159 #define HW_EVENT_FLASH_FW_ERR   0xF024
1160
1161         __le32  flash_data;             /* Flash/NVRAM BIOS data. */
1162
1163         __le32  ctrl_status;            /* Control/Status. */
1164 #define CSRX_FLASH_ACCESS_ERROR BIT_18  /* Flash/NVRAM Access Error. */
1165 #define CSRX_DMA_ACTIVE         BIT_17  /* DMA Active status. */
1166 #define CSRX_DMA_SHUTDOWN       BIT_16  /* DMA Shutdown control status. */
1167 #define CSRX_FUNCTION           BIT_15  /* Function number. */
1168                                         /* PCI-X Bus Mode. */
1169 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8)
1170 #define PBM_PCI_33MHZ           (0 << 8)
1171 #define PBM_PCIX_M1_66MHZ       (1 << 8)
1172 #define PBM_PCIX_M1_100MHZ      (2 << 8)
1173 #define PBM_PCIX_M1_133MHZ      (3 << 8)
1174 #define PBM_PCIX_M2_66MHZ       (5 << 8)
1175 #define PBM_PCIX_M2_100MHZ      (6 << 8)
1176 #define PBM_PCIX_M2_133MHZ      (7 << 8)
1177 #define PBM_PCI_66MHZ           (8 << 8)
1178                                         /* Max Write Burst byte count. */
1179 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4)
1180 #define MWB_512_BYTES           (0 << 4)
1181 #define MWB_1024_BYTES          (1 << 4)
1182 #define MWB_2048_BYTES          (2 << 4)
1183 #define MWB_4096_BYTES          (3 << 4)
1184
1185 #define CSRX_64BIT_SLOT         BIT_2   /* PCI 64-Bit Bus Slot. */
1186 #define CSRX_FLASH_ENABLE       BIT_1   /* Flash BIOS Read/Write enable. */
1187 #define CSRX_ISP_SOFT_RESET     BIT_0   /* ISP soft reset. */
1188
1189         __le32  ictrl;                  /* Interrupt control. */
1190 #define ICRX_EN_RISC_INT        BIT_3   /* Enable RISC interrupts on PCI. */
1191
1192         __le32  istatus;                /* Interrupt status. */
1193 #define ISRX_RISC_INT           BIT_3   /* RISC interrupt. */
1194
1195         __le32  unused_1[2];            /* Gap. */
1196
1197                                         /* Request Queue. */
1198         __le32  req_q_in;               /*  In-Pointer. */
1199         __le32  req_q_out;              /*  Out-Pointer. */
1200                                         /* Response Queue. */
1201         __le32  rsp_q_in;               /*  In-Pointer. */
1202         __le32  rsp_q_out;              /*  Out-Pointer. */
1203                                         /* Priority Request Queue. */
1204         __le32  preq_q_in;              /*  In-Pointer. */
1205         __le32  preq_q_out;             /*  Out-Pointer. */
1206
1207         __le32  unused_2[2];            /* Gap. */
1208
1209                                         /* ATIO Queue. */
1210         __le32  atio_q_in;              /*  In-Pointer. */
1211         __le32  atio_q_out;             /*  Out-Pointer. */
1212
1213         __le32  host_status;
1214 #define HSRX_RISC_INT           BIT_15  /* RISC to Host interrupt. */
1215 #define HSRX_RISC_PAUSED        BIT_8   /* RISC Paused. */
1216
1217         __le32  hccr;                   /* Host command & control register. */
1218                                         /* HCCR statuses. */
1219 #define HCCRX_HOST_INT          BIT_6   /* Host to RISC interrupt bit. */
1220 #define HCCRX_RISC_RESET        BIT_5   /* RISC Reset mode bit. */
1221                                         /* HCCR commands. */
1222                                         /* NOOP. */
1223 #define HCCRX_NOOP              0x00000000
1224                                         /* Set RISC Reset. */
1225 #define HCCRX_SET_RISC_RESET    0x10000000
1226                                         /* Clear RISC Reset. */
1227 #define HCCRX_CLR_RISC_RESET    0x20000000
1228                                         /* Set RISC Pause. */
1229 #define HCCRX_SET_RISC_PAUSE    0x30000000
1230                                         /* Releases RISC Pause. */
1231 #define HCCRX_REL_RISC_PAUSE    0x40000000
1232                                         /* Set HOST to RISC interrupt. */
1233 #define HCCRX_SET_HOST_INT      0x50000000
1234                                         /* Clear HOST to RISC interrupt. */
1235 #define HCCRX_CLR_HOST_INT      0x60000000
1236                                         /* Clear RISC to PCI interrupt. */
1237 #define HCCRX_CLR_RISC_INT      0xA0000000
1238
1239         __le32  gpiod;                  /* GPIO Data register. */
1240
1241                                         /* LED update mask. */
1242 #define GPDX_LED_UPDATE_MASK    (BIT_20|BIT_19|BIT_18)
1243                                         /* Data update mask. */
1244 #define GPDX_DATA_UPDATE_MASK   (BIT_17|BIT_16)
1245                                         /* Data update mask. */
1246 #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1247                                         /* LED control mask. */
1248 #define GPDX_LED_COLOR_MASK     (BIT_4|BIT_3|BIT_2)
1249                                         /* LED bit values. Color names as
1250                                          * referenced in fw spec.
1251                                          */
1252 #define GPDX_LED_YELLOW_ON      BIT_2
1253 #define GPDX_LED_GREEN_ON       BIT_3
1254 #define GPDX_LED_AMBER_ON       BIT_4
1255                                         /* Data in/out. */
1256 #define GPDX_DATA_INOUT         (BIT_1|BIT_0)
1257
1258         __le32  gpioe;                  /* GPIO Enable register. */
1259                                         /* Enable update mask. */
1260 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16)
1261                                         /* Enable update mask. */
1262 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1263                                         /* Enable. */
1264 #define GPEX_ENABLE             (BIT_1|BIT_0)
1265
1266         __le32  iobase_addr;            /* I/O Bus Base Address register. */
1267
1268         __le32  unused_3[10];           /* Gap. */
1269
1270         __le16  mailbox0;
1271         __le16  mailbox1;
1272         __le16  mailbox2;
1273         __le16  mailbox3;
1274         __le16  mailbox4;
1275         __le16  mailbox5;
1276         __le16  mailbox6;
1277         __le16  mailbox7;
1278         __le16  mailbox8;
1279         __le16  mailbox9;
1280         __le16  mailbox10;
1281         __le16  mailbox11;
1282         __le16  mailbox12;
1283         __le16  mailbox13;
1284         __le16  mailbox14;
1285         __le16  mailbox15;
1286         __le16  mailbox16;
1287         __le16  mailbox17;
1288         __le16  mailbox18;
1289         __le16  mailbox19;
1290         __le16  mailbox20;
1291         __le16  mailbox21;
1292         __le16  mailbox22;
1293         __le16  mailbox23;
1294         __le16  mailbox24;
1295         __le16  mailbox25;
1296         __le16  mailbox26;
1297         __le16  mailbox27;
1298         __le16  mailbox28;
1299         __le16  mailbox29;
1300         __le16  mailbox30;
1301         __le16  mailbox31;
1302
1303         __le32  iobase_window;
1304         __le32  iobase_c4;
1305         __le32  iobase_c8;
1306         __le32  unused_4_1[6];          /* Gap. */
1307         __le32  iobase_q;
1308         __le32  unused_5[2];            /* Gap. */
1309         __le32  iobase_select;
1310         __le32  unused_6[2];            /* Gap. */
1311         __le32  iobase_sdata;
1312 };
1313 /* RISC-RISC semaphore register PCI offet */
1314 #define RISC_REGISTER_BASE_OFFSET       0x7010
1315 #define RISC_REGISTER_WINDOW_OFFSET     0x6
1316
1317 /* RISC-RISC semaphore/flag register (risc address 0x7016) */
1318
1319 #define RISC_SEMAPHORE          0x1UL
1320 #define RISC_SEMAPHORE_WE       (RISC_SEMAPHORE << 16)
1321 #define RISC_SEMAPHORE_CLR      (RISC_SEMAPHORE_WE | 0x0UL)
1322 #define RISC_SEMAPHORE_SET      (RISC_SEMAPHORE_WE | RISC_SEMAPHORE)
1323
1324 #define RISC_SEMAPHORE_FORCE            0x8000UL
1325 #define RISC_SEMAPHORE_FORCE_WE         (RISC_SEMAPHORE_FORCE << 16)
1326 #define RISC_SEMAPHORE_FORCE_CLR        (RISC_SEMAPHORE_FORCE_WE | 0x0UL)
1327 #define RISC_SEMAPHORE_FORCE_SET        \
1328                 (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE)
1329
1330 /* RISC semaphore timeouts (ms) */
1331 #define TIMEOUT_SEMAPHORE               2500
1332 #define TIMEOUT_SEMAPHORE_FORCE         2000
1333 #define TIMEOUT_TOTAL_ELAPSED           4500
1334
1335 /* Trace Control *************************************************************/
1336
1337 #define TC_AEN_DISABLE          0
1338
1339 #define TC_EFT_ENABLE           4
1340 #define TC_EFT_DISABLE          5
1341
1342 #define TC_FCE_ENABLE           8
1343 #define TC_FCE_OPTIONS          0
1344 #define TC_FCE_DEFAULT_RX_SIZE  2112
1345 #define TC_FCE_DEFAULT_TX_SIZE  2112
1346 #define TC_FCE_DISABLE          9
1347 #define TC_FCE_DISABLE_TRACE    BIT_0
1348
1349 /* MID Support ***************************************************************/
1350
1351 #define MIN_MULTI_ID_FABRIC     64      /* Must be power-of-2. */
1352 #define MAX_MULTI_ID_FABRIC     256     /* ... */
1353
1354 struct mid_conf_entry_24xx {
1355         uint16_t reserved_1;
1356
1357         /*
1358          * BIT 0  = Enable Hard Loop Id
1359          * BIT 1  = Acquire Loop ID in LIPA
1360          * BIT 2  = ID not Acquired
1361          * BIT 3  = Enable VP
1362          * BIT 4  = Enable Initiator Mode
1363          * BIT 5  = Disable Target Mode
1364          * BIT 6-7 = Reserved
1365          */
1366         uint8_t options;
1367
1368         uint8_t hard_address;
1369
1370         uint8_t port_name[WWN_SIZE];
1371         uint8_t node_name[WWN_SIZE];
1372 };
1373
1374 struct mid_init_cb_24xx {
1375         struct init_cb_24xx init_cb;
1376
1377         __le16  count;
1378         __le16  options;
1379
1380         struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1381 };
1382
1383
1384 struct mid_db_entry_24xx {
1385         uint16_t status;
1386 #define MDBS_NON_PARTIC         BIT_3
1387 #define MDBS_ID_ACQUIRED        BIT_1
1388 #define MDBS_ENABLED            BIT_0
1389
1390         uint8_t options;
1391         uint8_t hard_address;
1392
1393         uint8_t port_name[WWN_SIZE];
1394         uint8_t node_name[WWN_SIZE];
1395
1396         uint8_t port_id[3];
1397         uint8_t reserved_1;
1398 };
1399
1400 /*
1401  * Virtual Port Control IOCB
1402  */
1403 #define VP_CTRL_IOCB_TYPE       0x30    /* Virtual Port Control entry. */
1404 struct vp_ctrl_entry_24xx {
1405         uint8_t entry_type;             /* Entry type. */
1406         uint8_t entry_count;            /* Entry count. */
1407         uint8_t sys_define;             /* System defined. */
1408         uint8_t entry_status;           /* Entry Status. */
1409
1410         uint32_t handle;                /* System handle. */
1411
1412         __le16  vp_idx_failed;
1413
1414         __le16  comp_status;            /* Completion status. */
1415 #define CS_VCE_IOCB_ERROR       0x01    /* Error processing IOCB */
1416 #define CS_VCE_ACQ_ID_ERROR     0x02    /* Error while acquireing ID. */
1417 #define CS_VCE_BUSY             0x05    /* Firmware not ready to accept cmd. */
1418
1419         __le16  command;
1420 #define VCE_COMMAND_ENABLE_VPS  0x00    /* Enable VPs. */
1421 #define VCE_COMMAND_DISABLE_VPS 0x08    /* Disable VPs. */
1422 #define VCE_COMMAND_DISABLE_VPS_REINIT  0x09 /* Disable VPs and reinit link. */
1423 #define VCE_COMMAND_DISABLE_VPS_LOGO    0x0a /* Disable VPs and LOGO ports. */
1424 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL        0x0b /* Disable VPs and LOGO ports. */
1425
1426         __le16  vp_count;
1427
1428         uint8_t vp_idx_map[16];
1429         __le16  flags;
1430         __le16  id;
1431         uint16_t reserved_4;
1432         __le16  hopct;
1433         uint8_t reserved_5[24];
1434 };
1435
1436 /*
1437  * Modify Virtual Port Configuration IOCB
1438  */
1439 #define VP_CONFIG_IOCB_TYPE     0x31    /* Virtual Port Config entry. */
1440 struct vp_config_entry_24xx {
1441         uint8_t entry_type;             /* Entry type. */
1442         uint8_t entry_count;            /* Entry count. */
1443         uint8_t handle_count;
1444         uint8_t entry_status;           /* Entry Status. */
1445
1446         uint32_t handle;                /* System handle. */
1447
1448         __le16  flags;
1449 #define CS_VF_BIND_VPORTS_TO_VF         BIT_0
1450 #define CS_VF_SET_QOS_OF_VPORTS         BIT_1
1451 #define CS_VF_SET_HOPS_OF_VPORTS        BIT_2
1452
1453         __le16  comp_status;            /* Completion status. */
1454 #define CS_VCT_STS_ERROR        0x01    /* Specified VPs were not disabled. */
1455 #define CS_VCT_CNT_ERROR        0x02    /* Invalid VP count. */
1456 #define CS_VCT_ERROR            0x03    /* Unknown error. */
1457 #define CS_VCT_IDX_ERROR        0x02    /* Invalid VP index. */
1458 #define CS_VCT_BUSY             0x05    /* Firmware not ready to accept cmd. */
1459
1460         uint8_t command;
1461 #define VCT_COMMAND_MOD_VPS     0x00    /* Modify VP configurations. */
1462 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */
1463
1464         uint8_t vp_count;
1465
1466         uint8_t vp_index1;
1467         uint8_t vp_index2;
1468
1469         uint8_t options_idx1;
1470         uint8_t hard_address_idx1;
1471         uint16_t reserved_vp1;
1472         uint8_t port_name_idx1[WWN_SIZE];
1473         uint8_t node_name_idx1[WWN_SIZE];
1474
1475         uint8_t options_idx2;
1476         uint8_t hard_address_idx2;
1477         uint16_t reserved_vp2;
1478         uint8_t port_name_idx2[WWN_SIZE];
1479         uint8_t node_name_idx2[WWN_SIZE];
1480         __le16  id;
1481         uint16_t reserved_4;
1482         __le16  hopct;
1483         uint8_t reserved_5[2];
1484 };
1485
1486 #define VP_RPT_ID_IOCB_TYPE     0x32    /* Report ID Acquisition entry. */
1487 enum VP_STATUS {
1488         VP_STAT_COMPL,
1489         VP_STAT_FAIL,
1490         VP_STAT_ID_CHG,
1491         VP_STAT_SNS_TO,                         /* timeout */
1492         VP_STAT_SNS_RJT,
1493         VP_STAT_SCR_TO,                         /* timeout */
1494         VP_STAT_SCR_RJT,
1495 };
1496
1497 enum VP_FLAGS {
1498         VP_FLAGS_CON_FLOOP = 1,
1499         VP_FLAGS_CON_P2P = 2,
1500         VP_FLAGS_CON_FABRIC = 3,
1501         VP_FLAGS_NAME_VALID = BIT_5,
1502 };
1503
1504 struct vp_rpt_id_entry_24xx {
1505         uint8_t entry_type;             /* Entry type. */
1506         uint8_t entry_count;            /* Entry count. */
1507         uint8_t sys_define;             /* System defined. */
1508         uint8_t entry_status;           /* Entry Status. */
1509         __le32 resv1;
1510         uint8_t vp_acquired;
1511         uint8_t vp_setup;
1512         uint8_t vp_idx;         /* Format 0=reserved */
1513         uint8_t vp_status;      /* Format 0=reserved */
1514
1515         uint8_t port_id[3];
1516         uint8_t format;
1517         union {
1518                 struct _f0 {
1519                         /* format 0 loop */
1520                         uint8_t vp_idx_map[16];
1521                         uint8_t reserved_4[32];
1522                 } f0;
1523                 struct _f1 {
1524                         /* format 1 fabric */
1525                         uint8_t vpstat1_subcode; /* vp_status=1 subcode */
1526                         uint8_t flags;
1527 #define TOPO_MASK  0xE
1528 #define TOPO_FL    0x2
1529 #define TOPO_N2N   0x4
1530 #define TOPO_F     0x6
1531
1532                         uint16_t fip_flags;
1533                         uint8_t rsv2[12];
1534
1535                         uint8_t ls_rjt_vendor;
1536                         uint8_t ls_rjt_explanation;
1537                         uint8_t ls_rjt_reason;
1538                         uint8_t rsv3[5];
1539
1540                         uint8_t port_name[8];
1541                         uint8_t node_name[8];
1542                         uint16_t bbcr;
1543                         uint8_t reserved_5[6];
1544                 } f1;
1545                 struct _f2 { /* format 2: N2N direct connect */
1546                         uint8_t vpstat1_subcode;
1547                         uint8_t flags;
1548                         uint16_t fip_flags;
1549                         uint8_t rsv2[12];
1550
1551                         uint8_t ls_rjt_vendor;
1552                         uint8_t ls_rjt_explanation;
1553                         uint8_t ls_rjt_reason;
1554                         uint8_t rsv3[5];
1555
1556                         uint8_t port_name[8];
1557                         uint8_t node_name[8];
1558                         uint16_t bbcr;
1559                         uint8_t reserved_5[2];
1560                         uint8_t remote_nport_id[4];
1561                 } f2;
1562         } u;
1563 };
1564
1565 #define VF_EVFP_IOCB_TYPE       0x26    /* Exchange Virtual Fabric Parameters entry. */
1566 struct vf_evfp_entry_24xx {
1567         uint8_t entry_type;             /* Entry type. */
1568         uint8_t entry_count;            /* Entry count. */
1569         uint8_t sys_define;             /* System defined. */
1570         uint8_t entry_status;           /* Entry Status. */
1571
1572         uint32_t handle;                /* System handle. */
1573         __le16  comp_status;           /* Completion status. */
1574         __le16  timeout;               /* timeout */
1575         __le16  adim_tagging_mode;
1576
1577         __le16  vfport_id;
1578         uint32_t exch_addr;
1579
1580         __le16  nport_handle;          /* N_PORT handle. */
1581         __le16  control_flags;
1582         uint32_t io_parameter_0;
1583         uint32_t io_parameter_1;
1584         __le64   tx_address __packed;   /* Data segment 0 address. */
1585         uint32_t tx_len;                /* Data segment 0 length. */
1586         __le64   rx_address __packed;   /* Data segment 1 address. */
1587         uint32_t rx_len;                /* Data segment 1 length. */
1588 };
1589
1590 /* END MID Support ***********************************************************/
1591
1592 /* Flash Description Table ***************************************************/
1593
1594 struct qla_fdt_layout {
1595         uint8_t sig[4];
1596         __le16  version;
1597         __le16  len;
1598         __le16  checksum;
1599         uint8_t unused1[2];
1600         uint8_t model[16];
1601         __le16  man_id;
1602         __le16  id;
1603         uint8_t flags;
1604         uint8_t erase_cmd;
1605         uint8_t alt_erase_cmd;
1606         uint8_t wrt_enable_cmd;
1607         uint8_t wrt_enable_bits;
1608         uint8_t wrt_sts_reg_cmd;
1609         uint8_t unprotect_sec_cmd;
1610         uint8_t read_man_id_cmd;
1611         __le32 block_size;
1612         __le32 alt_block_size;
1613         __le32 flash_size;
1614         __le32 wrt_enable_data;
1615         uint8_t read_id_addr_len;
1616         uint8_t wrt_disable_bits;
1617         uint8_t read_dev_id_len;
1618         uint8_t chip_erase_cmd;
1619         __le16  read_timeout;
1620         uint8_t protect_sec_cmd;
1621         uint8_t unused2[65];
1622 };
1623
1624 /* Flash Layout Table ********************************************************/
1625
1626 struct qla_flt_location {
1627         uint8_t sig[4];
1628         __le16  start_lo;
1629         __le16  start_hi;
1630         uint8_t version;
1631         uint8_t unused[5];
1632         __le16  checksum;
1633 };
1634
1635 #define FLT_REG_FW              0x01
1636 #define FLT_REG_BOOT_CODE       0x07
1637 #define FLT_REG_VPD_0           0x14
1638 #define FLT_REG_NVRAM_0         0x15
1639 #define FLT_REG_VPD_1           0x16
1640 #define FLT_REG_NVRAM_1         0x17
1641 #define FLT_REG_VPD_2           0xD4
1642 #define FLT_REG_NVRAM_2         0xD5
1643 #define FLT_REG_VPD_3           0xD6
1644 #define FLT_REG_NVRAM_3         0xD7
1645 #define FLT_REG_FDT             0x1a
1646 #define FLT_REG_FLT             0x1c
1647 #define FLT_REG_HW_EVENT_0      0x1d
1648 #define FLT_REG_HW_EVENT_1      0x1f
1649 #define FLT_REG_NPIV_CONF_0     0x29
1650 #define FLT_REG_NPIV_CONF_1     0x2a
1651 #define FLT_REG_GOLD_FW         0x2f
1652 #define FLT_REG_FCP_PRIO_0      0x87
1653 #define FLT_REG_FCP_PRIO_1      0x88
1654 #define FLT_REG_CNA_FW          0x97
1655 #define FLT_REG_BOOT_CODE_8044  0xA2
1656 #define FLT_REG_FCOE_FW         0xA4
1657 #define FLT_REG_FCOE_NVRAM_0    0xAA
1658 #define FLT_REG_FCOE_NVRAM_1    0xAC
1659
1660 /* 27xx */
1661 #define FLT_REG_IMG_PRI_27XX    0x95
1662 #define FLT_REG_IMG_SEC_27XX    0x96
1663 #define FLT_REG_FW_SEC_27XX     0x02
1664 #define FLT_REG_BOOTLOAD_SEC_27XX       0x9
1665 #define FLT_REG_VPD_SEC_27XX_0  0x50
1666 #define FLT_REG_VPD_SEC_27XX_1  0x52
1667 #define FLT_REG_VPD_SEC_27XX_2  0xD8
1668 #define FLT_REG_VPD_SEC_27XX_3  0xDA
1669
1670 /* 28xx */
1671 #define FLT_REG_AUX_IMG_PRI_28XX        0x125
1672 #define FLT_REG_AUX_IMG_SEC_28XX        0x126
1673 #define FLT_REG_VPD_SEC_28XX_0          0x10C
1674 #define FLT_REG_VPD_SEC_28XX_1          0x10E
1675 #define FLT_REG_VPD_SEC_28XX_2          0x110
1676 #define FLT_REG_VPD_SEC_28XX_3          0x112
1677 #define FLT_REG_NVRAM_SEC_28XX_0        0x10D
1678 #define FLT_REG_NVRAM_SEC_28XX_1        0x10F
1679 #define FLT_REG_NVRAM_SEC_28XX_2        0x111
1680 #define FLT_REG_NVRAM_SEC_28XX_3        0x113
1681 #define FLT_REG_MPI_PRI_28XX            0xD3
1682 #define FLT_REG_MPI_SEC_28XX            0xF0
1683 #define FLT_REG_PEP_PRI_28XX            0xD1
1684 #define FLT_REG_PEP_SEC_28XX            0xF1
1685
1686 struct qla_flt_region {
1687         __le16  code;
1688         uint8_t attribute;
1689         uint8_t reserved;
1690         __le32 size;
1691         __le32 start;
1692         __le32 end;
1693 };
1694
1695 struct qla_flt_header {
1696         __le16  version;
1697         __le16  length;
1698         __le16  checksum;
1699         __le16  unused;
1700         struct qla_flt_region region[0];
1701 };
1702
1703 #define FLT_REGION_SIZE         16
1704 #define FLT_MAX_REGIONS         0xFF
1705 #define FLT_REGIONS_SIZE        (FLT_REGION_SIZE * FLT_MAX_REGIONS)
1706
1707 /* Flash NPIV Configuration Table ********************************************/
1708
1709 struct qla_npiv_header {
1710         uint8_t sig[2];
1711         __le16  version;
1712         __le16  entries;
1713         __le16  unused[4];
1714         __le16  checksum;
1715 };
1716
1717 struct qla_npiv_entry {
1718         __le16  flags;
1719         __le16  vf_id;
1720         uint8_t q_qos;
1721         uint8_t f_qos;
1722         __le16  unused1;
1723         uint8_t port_name[WWN_SIZE];
1724         uint8_t node_name[WWN_SIZE];
1725 };
1726
1727 /* 84XX Support **************************************************************/
1728
1729 #define MBA_ISP84XX_ALERT       0x800f  /* Alert Notification. */
1730 #define A84_PANIC_RECOVERY      0x1
1731 #define A84_OP_LOGIN_COMPLETE   0x2
1732 #define A84_DIAG_LOGIN_COMPLETE 0x3
1733 #define A84_GOLD_LOGIN_COMPLETE 0x4
1734
1735 #define MBC_ISP84XX_RESET       0x3a    /* Reset. */
1736
1737 #define FSTATE_REMOTE_FC_DOWN   BIT_0
1738 #define FSTATE_NSL_LINK_DOWN    BIT_1
1739 #define FSTATE_IS_DIAG_FW       BIT_2
1740 #define FSTATE_LOGGED_IN        BIT_3
1741 #define FSTATE_WAITING_FOR_VERIFY       BIT_4
1742
1743 #define VERIFY_CHIP_IOCB_TYPE   0x1B
1744 struct verify_chip_entry_84xx {
1745         uint8_t entry_type;
1746         uint8_t entry_count;
1747         uint8_t sys_defined;
1748         uint8_t entry_status;
1749
1750         uint32_t handle;
1751
1752         __le16  options;
1753 #define VCO_DONT_UPDATE_FW      BIT_0
1754 #define VCO_FORCE_UPDATE        BIT_1
1755 #define VCO_DONT_RESET_UPDATE   BIT_2
1756 #define VCO_DIAG_FW             BIT_3
1757 #define VCO_END_OF_DATA         BIT_14
1758 #define VCO_ENABLE_DSD          BIT_15
1759
1760         __le16  reserved_1;
1761
1762         __le16  data_seg_cnt;
1763         __le16  reserved_2[3];
1764
1765         __le32  fw_ver;
1766         __le32  exchange_address;
1767
1768         __le32 reserved_3[3];
1769         __le32  fw_size;
1770         __le32  fw_seq_size;
1771         __le32  relative_offset;
1772
1773         struct dsd64 dsd;
1774 };
1775
1776 struct verify_chip_rsp_84xx {
1777         uint8_t entry_type;
1778         uint8_t entry_count;
1779         uint8_t sys_defined;
1780         uint8_t entry_status;
1781
1782         uint32_t handle;
1783
1784         __le16  comp_status;
1785 #define CS_VCS_CHIP_FAILURE     0x3
1786 #define CS_VCS_BAD_EXCHANGE     0x8
1787 #define CS_VCS_SEQ_COMPLETEi    0x40
1788
1789         __le16  failure_code;
1790 #define VFC_CHECKSUM_ERROR      0x1
1791 #define VFC_INVALID_LEN         0x2
1792 #define VFC_ALREADY_IN_PROGRESS 0x8
1793
1794         __le16  reserved_1[4];
1795
1796         __le32  fw_ver;
1797         __le32  exchange_address;
1798
1799         __le32 reserved_2[6];
1800 };
1801
1802 #define ACCESS_CHIP_IOCB_TYPE   0x2B
1803 struct access_chip_84xx {
1804         uint8_t entry_type;
1805         uint8_t entry_count;
1806         uint8_t sys_defined;
1807         uint8_t entry_status;
1808
1809         uint32_t handle;
1810
1811         __le16  options;
1812 #define ACO_DUMP_MEMORY         0x0
1813 #define ACO_LOAD_MEMORY         0x1
1814 #define ACO_CHANGE_CONFIG_PARAM 0x2
1815 #define ACO_REQUEST_INFO        0x3
1816
1817         __le16  reserved1;
1818
1819         __le16  dseg_count;
1820         __le16  reserved2[3];
1821
1822         __le32  parameter1;
1823         __le32  parameter2;
1824         __le32  parameter3;
1825
1826         __le32  reserved3[3];
1827         __le32  total_byte_cnt;
1828         __le32  reserved4;
1829
1830         struct dsd64 dsd;
1831 };
1832
1833 struct access_chip_rsp_84xx {
1834         uint8_t entry_type;
1835         uint8_t entry_count;
1836         uint8_t sys_defined;
1837         uint8_t entry_status;
1838
1839         uint32_t handle;
1840
1841         __le16  comp_status;
1842         __le16  failure_code;
1843         __le32  residual_count;
1844
1845         __le32  reserved[12];
1846 };
1847
1848 /* 81XX Support **************************************************************/
1849
1850 #define MBA_DCBX_START          0x8016
1851 #define MBA_DCBX_COMPLETE       0x8030
1852 #define MBA_FCF_CONF_ERR        0x8031
1853 #define MBA_DCBX_PARAM_UPDATE   0x8032
1854 #define MBA_IDC_COMPLETE        0x8100
1855 #define MBA_IDC_NOTIFY          0x8101
1856 #define MBA_IDC_TIME_EXT        0x8102
1857
1858 #define MBC_IDC_ACK             0x101
1859 #define MBC_RESTART_MPI_FW      0x3d
1860 #define MBC_FLASH_ACCESS_CTRL   0x3e    /* Control flash access. */
1861 #define MBC_GET_XGMAC_STATS     0x7a
1862 #define MBC_GET_DCBX_PARAMS     0x51
1863
1864 /*
1865  * ISP83xx mailbox commands
1866  */
1867 #define MBC_WRITE_REMOTE_REG            0x0001 /* Write remote register */
1868 #define MBC_READ_REMOTE_REG             0x0009 /* Read remote register */
1869 #define MBC_RESTART_NIC_FIRMWARE        0x003d /* Restart NIC firmware */
1870 #define MBC_SET_ACCESS_CONTROL          0x003e /* Access control command */
1871
1872 /* Flash access control option field bit definitions */
1873 #define FAC_OPT_FORCE_SEMAPHORE         BIT_15
1874 #define FAC_OPT_REQUESTOR_ID            BIT_14
1875 #define FAC_OPT_CMD_SUBCODE             0xff
1876
1877 /* Flash access control command subcodes */
1878 #define FAC_OPT_CMD_WRITE_PROTECT       0x00
1879 #define FAC_OPT_CMD_WRITE_ENABLE        0x01
1880 #define FAC_OPT_CMD_ERASE_SECTOR        0x02
1881 #define FAC_OPT_CMD_LOCK_SEMAPHORE      0x03
1882 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE    0x04
1883 #define FAC_OPT_CMD_GET_SECTOR_SIZE     0x05
1884
1885 /* enhanced features bit definitions */
1886 #define NEF_LR_DIST_ENABLE      BIT_0
1887
1888 /* LR Distance bit positions */
1889 #define LR_DIST_NV_POS          2
1890 #define LR_DIST_NV_MASK         0xf
1891 #define LR_DIST_FW_POS          12
1892
1893 /* FAC semaphore defines */
1894 #define FAC_SEMAPHORE_UNLOCK    0
1895 #define FAC_SEMAPHORE_LOCK      1
1896
1897 struct nvram_81xx {
1898         /* NVRAM header. */
1899         uint8_t id[4];
1900         __le16  nvram_version;
1901         __le16  reserved_0;
1902
1903         /* Firmware Initialization Control Block. */
1904         __le16  version;
1905         __le16  reserved_1;
1906         __le16  frame_payload_size;
1907         __le16  execution_throttle;
1908         __le16  exchange_count;
1909         __le16  reserved_2;
1910
1911         uint8_t port_name[WWN_SIZE];
1912         uint8_t node_name[WWN_SIZE];
1913
1914         __le16  login_retry_count;
1915         __le16  reserved_3;
1916         __le16  interrupt_delay_timer;
1917         __le16  login_timeout;
1918
1919         __le32  firmware_options_1;
1920         __le32  firmware_options_2;
1921         __le32  firmware_options_3;
1922
1923         __le16  reserved_4[4];
1924
1925         /* Offset 64. */
1926         uint8_t enode_mac[6];
1927         __le16  reserved_5[5];
1928
1929         /* Offset 80. */
1930         __le16  reserved_6[24];
1931
1932         /* Offset 128. */
1933         __le16  ex_version;
1934         uint8_t prio_fcf_matching_flags;
1935         uint8_t reserved_6_1[3];
1936         __le16  pri_fcf_vlan_id;
1937         uint8_t pri_fcf_fabric_name[8];
1938         __le16  reserved_6_2[7];
1939         uint8_t spma_mac_addr[6];
1940         __le16  reserved_6_3[14];
1941
1942         /* Offset 192. */
1943         uint8_t min_supported_speed;
1944         uint8_t reserved_7_0;
1945         __le16  reserved_7[31];
1946
1947         /*
1948          * BIT 0  = Enable spinup delay
1949          * BIT 1  = Disable BIOS
1950          * BIT 2  = Enable Memory Map BIOS
1951          * BIT 3  = Enable Selectable Boot
1952          * BIT 4  = Disable RISC code load
1953          * BIT 5  = Disable Serdes
1954          * BIT 6  = Opt boot mode
1955          * BIT 7  = Interrupt enable
1956          *
1957          * BIT 8  = EV Control enable
1958          * BIT 9  = Enable lip reset
1959          * BIT 10 = Enable lip full login
1960          * BIT 11 = Enable target reset
1961          * BIT 12 = Stop firmware
1962          * BIT 13 = Enable nodename option
1963          * BIT 14 = Default WWPN valid
1964          * BIT 15 = Enable alternate WWN
1965          *
1966          * BIT 16 = CLP LUN string
1967          * BIT 17 = CLP Target string
1968          * BIT 18 = CLP BIOS enable string
1969          * BIT 19 = CLP Serdes string
1970          * BIT 20 = CLP WWPN string
1971          * BIT 21 = CLP WWNN string
1972          * BIT 22 =
1973          * BIT 23 =
1974          * BIT 24 = Keep WWPN
1975          * BIT 25 = Temp WWPN
1976          * BIT 26-31 =
1977          */
1978         __le32  host_p;
1979
1980         uint8_t alternate_port_name[WWN_SIZE];
1981         uint8_t alternate_node_name[WWN_SIZE];
1982
1983         uint8_t boot_port_name[WWN_SIZE];
1984         __le16  boot_lun_number;
1985         __le16  reserved_8;
1986
1987         uint8_t alt1_boot_port_name[WWN_SIZE];
1988         __le16  alt1_boot_lun_number;
1989         __le16  reserved_9;
1990
1991         uint8_t alt2_boot_port_name[WWN_SIZE];
1992         __le16  alt2_boot_lun_number;
1993         __le16  reserved_10;
1994
1995         uint8_t alt3_boot_port_name[WWN_SIZE];
1996         __le16  alt3_boot_lun_number;
1997         __le16  reserved_11;
1998
1999         /*
2000          * BIT 0 = Selective Login
2001          * BIT 1 = Alt-Boot Enable
2002          * BIT 2 = Reserved
2003          * BIT 3 = Boot Order List
2004          * BIT 4 = Reserved
2005          * BIT 5 = Selective LUN
2006          * BIT 6 = Reserved
2007          * BIT 7-31 =
2008          */
2009         __le32  efi_parameters;
2010
2011         uint8_t reset_delay;
2012         uint8_t reserved_12;
2013         __le16  reserved_13;
2014
2015         __le16  boot_id_number;
2016         __le16  reserved_14;
2017
2018         __le16  max_luns_per_target;
2019         __le16  reserved_15;
2020
2021         __le16  port_down_retry_count;
2022         __le16  link_down_timeout;
2023
2024         /* FCode parameters. */
2025         __le16  fcode_parameter;
2026
2027         __le16  reserved_16[3];
2028
2029         /* Offset 352. */
2030         uint8_t reserved_17[4];
2031         __le16  reserved_18[5];
2032         uint8_t reserved_19[2];
2033         __le16  reserved_20[8];
2034
2035         /* Offset 384. */
2036         uint8_t reserved_21[16];
2037         __le16  reserved_22[3];
2038
2039         /* Offset 406 (0x196) Enhanced Features
2040          * BIT 0    = Extended BB credits for LR
2041          * BIT 1    = Virtual Fabric Enable
2042          * BIT 2-5  = Distance Support if BIT 0 is on
2043          * BIT 6    = Prefer FCP
2044          * BIT 7    = SCM Disabled if BIT is set (1)
2045          * BIT 8-15 = Unused
2046          */
2047         uint16_t enhanced_features;
2048
2049         uint16_t reserved_24[4];
2050
2051         /* Offset 416. */
2052         __le16  reserved_25[32];
2053
2054         /* Offset 480. */
2055         uint8_t model_name[16];
2056
2057         /* Offset 496. */
2058         __le16  feature_mask_l;
2059         __le16  feature_mask_h;
2060         __le16  reserved_26[2];
2061
2062         __le16  subsystem_vendor_id;
2063         __le16  subsystem_device_id;
2064
2065         __le32  checksum;
2066 };
2067
2068 /*
2069  * ISP Initialization Control Block.
2070  * Little endian except where noted.
2071  */
2072 #define ICB_VERSION 1
2073 struct init_cb_81xx {
2074         __le16  version;
2075         __le16  reserved_1;
2076
2077         __le16  frame_payload_size;
2078         __le16  execution_throttle;
2079         __le16  exchange_count;
2080
2081         __le16  reserved_2;
2082
2083         uint8_t port_name[WWN_SIZE];            /* Big endian. */
2084         uint8_t node_name[WWN_SIZE];            /* Big endian. */
2085
2086         __le16  response_q_inpointer;
2087         __le16  request_q_outpointer;
2088
2089         __le16  login_retry_count;
2090
2091         __le16  prio_request_q_outpointer;
2092
2093         __le16  response_q_length;
2094         __le16  request_q_length;
2095
2096         __le16  reserved_3;
2097
2098         __le16  prio_request_q_length;
2099
2100         __le64   request_q_address __packed;
2101         __le64   response_q_address __packed;
2102         __le64   prio_request_q_address __packed;
2103
2104         uint8_t reserved_4[8];
2105
2106         __le16  atio_q_inpointer;
2107         __le16  atio_q_length;
2108         __le64   atio_q_address __packed;
2109
2110         __le16  interrupt_delay_timer;          /* 100us increments. */
2111         __le16  login_timeout;
2112
2113         /*
2114          * BIT 0-3 = Reserved
2115          * BIT 4  = Enable Target Mode
2116          * BIT 5  = Disable Initiator Mode
2117          * BIT 6  = Reserved
2118          * BIT 7  = Reserved
2119          *
2120          * BIT 8-13 = Reserved
2121          * BIT 14 = Node Name Option
2122          * BIT 15-31 = Reserved
2123          */
2124         __le32  firmware_options_1;
2125
2126         /*
2127          * BIT 0  = Operation Mode bit 0
2128          * BIT 1  = Operation Mode bit 1
2129          * BIT 2  = Operation Mode bit 2
2130          * BIT 3  = Operation Mode bit 3
2131          * BIT 4-7 = Reserved
2132          *
2133          * BIT 8  = Enable Class 2
2134          * BIT 9  = Enable ACK0
2135          * BIT 10 = Reserved
2136          * BIT 11 = Enable FC-SP Security
2137          * BIT 12 = FC Tape Enable
2138          * BIT 13 = Reserved
2139          * BIT 14 = Enable Target PRLI Control
2140          * BIT 15-31 = Reserved
2141          */
2142         __le32  firmware_options_2;
2143
2144         /*
2145          * BIT 0-3 = Reserved
2146          * BIT 4  = FCP RSP Payload bit 0
2147          * BIT 5  = FCP RSP Payload bit 1
2148          * BIT 6  = Enable Receive Out-of-Order data frame handling
2149          * BIT 7  = Reserved
2150          *
2151          * BIT 8  = Reserved
2152          * BIT 9  = Enable Out-of-Order FCP_XFER_RDY relative offset handling
2153          * BIT 10-16 = Reserved
2154          * BIT 17 = Enable multiple FCFs
2155          * BIT 18-20 = MAC addressing mode
2156          * BIT 21-25 = Ethernet data rate
2157          * BIT 26 = Enable ethernet header rx IOCB for ATIO q
2158          * BIT 27 = Enable ethernet header rx IOCB for response q
2159          * BIT 28 = SPMA selection bit 0
2160          * BIT 28 = SPMA selection bit 1
2161          * BIT 30-31 = Reserved
2162          */
2163         __le32  firmware_options_3;
2164
2165         uint8_t  reserved_5[8];
2166
2167         uint8_t enode_mac[6];
2168
2169         uint8_t reserved_6[10];
2170 };
2171
2172 struct mid_init_cb_81xx {
2173         struct init_cb_81xx init_cb;
2174
2175         uint16_t count;
2176         uint16_t options;
2177
2178         struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
2179 };
2180
2181 struct ex_init_cb_81xx {
2182         uint16_t ex_version;
2183         uint8_t prio_fcf_matching_flags;
2184         uint8_t reserved_1[3];
2185         uint16_t pri_fcf_vlan_id;
2186         uint8_t pri_fcf_fabric_name[8];
2187         uint16_t reserved_2[7];
2188         uint8_t spma_mac_addr[6];
2189         uint16_t reserved_3[14];
2190 };
2191
2192 #define FARX_ACCESS_FLASH_CONF_81XX     0x7FFD0000
2193 #define FARX_ACCESS_FLASH_DATA_81XX     0x7F800000
2194 #define FARX_ACCESS_FLASH_CONF_28XX     0x7FFD0000
2195 #define FARX_ACCESS_FLASH_DATA_28XX     0x7F7D0000
2196
2197 /* FCP priority config defines *************************************/
2198 /* operations */
2199 #define QLFC_FCP_PRIO_DISABLE           0x0
2200 #define QLFC_FCP_PRIO_ENABLE            0x1
2201 #define QLFC_FCP_PRIO_GET_CONFIG        0x2
2202 #define QLFC_FCP_PRIO_SET_CONFIG        0x3
2203
2204 struct qla_fcp_prio_entry {
2205         uint16_t flags;         /* Describes parameter(s) in FCP        */
2206         /* priority entry that are valid        */
2207 #define FCP_PRIO_ENTRY_VALID            0x1
2208 #define FCP_PRIO_ENTRY_TAG_VALID        0x2
2209 #define FCP_PRIO_ENTRY_SPID_VALID       0x4
2210 #define FCP_PRIO_ENTRY_DPID_VALID       0x8
2211 #define FCP_PRIO_ENTRY_LUNB_VALID       0x10
2212 #define FCP_PRIO_ENTRY_LUNE_VALID       0x20
2213 #define FCP_PRIO_ENTRY_SWWN_VALID       0x40
2214 #define FCP_PRIO_ENTRY_DWWN_VALID       0x80
2215         uint8_t  tag;           /* Priority value                   */
2216         uint8_t  reserved;      /* Reserved for future use          */
2217         uint32_t src_pid;       /* Src port id. high order byte     */
2218                                 /* unused; -1 (wild card)           */
2219         uint32_t dst_pid;       /* Src port id. high order byte     */
2220         /* unused; -1 (wild card)           */
2221         uint16_t lun_beg;       /* 1st lun num of lun range.        */
2222                                 /* -1 (wild card)                   */
2223         uint16_t lun_end;       /* 2nd lun num of lun range.        */
2224                                 /* -1 (wild card)                   */
2225         uint8_t  src_wwpn[8];   /* Source WWPN: -1 (wild card)      */
2226         uint8_t  dst_wwpn[8];   /* Destination WWPN: -1 (wild card) */
2227 };
2228
2229 struct qla_fcp_prio_cfg {
2230         uint8_t  signature[4];  /* "HQOS" signature of config data  */
2231         uint16_t version;       /* 1: Initial version               */
2232         uint16_t length;        /* config data size in num bytes    */
2233         uint16_t checksum;      /* config data bytes checksum       */
2234         uint16_t num_entries;   /* Number of entries                */
2235         uint16_t size_of_entry; /* Size of each entry in num bytes  */
2236         uint8_t  attributes;    /* enable/disable, persistence      */
2237 #define FCP_PRIO_ATTR_DISABLE   0x0
2238 #define FCP_PRIO_ATTR_ENABLE    0x1
2239 #define FCP_PRIO_ATTR_PERSIST   0x2
2240         uint8_t  reserved;      /* Reserved for future use          */
2241 #define FCP_PRIO_CFG_HDR_SIZE   offsetof(struct qla_fcp_prio_cfg, entry)
2242         struct qla_fcp_prio_entry entry[1023]; /* fcp priority entries  */
2243         uint8_t  reserved2[16];
2244 };
2245
2246 #define FCP_PRIO_CFG_SIZE       (32*1024) /* fcp prio data per port*/
2247
2248 /* 25XX Support ****************************************************/
2249 #define FA_FCP_PRIO0_ADDR_25    0x3C000
2250 #define FA_FCP_PRIO1_ADDR_25    0x3E000
2251
2252 /* 81XX Flash locations -- occupies second 2MB region. */
2253 #define FA_BOOT_CODE_ADDR_81    0x80000
2254 #define FA_RISC_CODE_ADDR_81    0xA0000
2255 #define FA_FW_AREA_ADDR_81      0xC0000
2256 #define FA_VPD_NVRAM_ADDR_81    0xD0000
2257 #define FA_VPD0_ADDR_81         0xD0000
2258 #define FA_VPD1_ADDR_81         0xD0400
2259 #define FA_NVRAM0_ADDR_81       0xD0080
2260 #define FA_NVRAM1_ADDR_81       0xD0180
2261 #define FA_FEATURE_ADDR_81      0xD4000
2262 #define FA_FLASH_DESCR_ADDR_81  0xD8000
2263 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400
2264 #define FA_HW_EVENT0_ADDR_81    0xDC000
2265 #define FA_HW_EVENT1_ADDR_81    0xDC400
2266 #define FA_NPIV_CONF0_ADDR_81   0xD1000
2267 #define FA_NPIV_CONF1_ADDR_81   0xD2000
2268
2269 /* 83XX Flash locations -- occupies second 8MB region. */
2270 #define FA_FLASH_LAYOUT_ADDR_83 (0x3F1000/4)
2271 #define FA_FLASH_LAYOUT_ADDR_28 (0x11000/4)
2272
2273 #define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET 0x196
2274
2275 #endif