1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /******************************************************************************
3 * QLOGIC LINUX SOFTWARE
5 * QLogic ISP1280 (Ultra2) /12160 (Ultra3) SCSI driver
6 * Copyright (C) 2000 Qlogic Corporation
9 ******************************************************************************/
15 * Data bit definitions.
33 #define BIT_16 0x10000
34 #define BIT_17 0x20000
35 #define BIT_18 0x40000
36 #define BIT_19 0x80000
37 #define BIT_20 0x100000
38 #define BIT_21 0x200000
39 #define BIT_22 0x400000
40 #define BIT_23 0x800000
41 #define BIT_24 0x1000000
42 #define BIT_25 0x2000000
43 #define BIT_26 0x4000000
44 #define BIT_27 0x8000000
45 #define BIT_28 0x10000000
46 #define BIT_29 0x20000000
47 #define BIT_30 0x40000000
48 #define BIT_31 0x80000000
51 #define RD_REG_WORD(addr) readw_relaxed(addr)
52 #define RD_REG_WORD_dmasync(addr) readw(addr)
53 #define WRT_REG_WORD(addr, data) writew(data, addr)
54 #else /* MEMORY_MAPPED_IO */
55 #define RD_REG_WORD(addr) inw((unsigned long)addr)
56 #define RD_REG_WORD_dmasync(addr) RD_REG_WORD(addr)
57 #define WRT_REG_WORD(addr, data) outw(data, (unsigned long)addr)
58 #endif /* MEMORY_MAPPED_IO */
61 * Host adapter default definitions.
63 #define MAX_BUSES 2 /* 2 */
66 #define MAX_TARGETS 16 /* 16 */
67 #define MAX_T_BITS 4 /* 4 */
69 #define MAX_LUNS 8 /* 32 */
70 #define MAX_L_BITS 3 /* 5 */
73 * Watchdog time quantum
75 #define QLA1280_WDG_TIME_QUANTUM 5 /* In seconds */
77 /* Command retry count (0-65535) */
78 #define COMMAND_RETRY_COUNT 255
80 /* Maximum outstanding commands in ISP queues */
81 #define MAX_OUTSTANDING_COMMANDS 512
82 #define COMPLETED_HANDLE ((unsigned char *) \
83 (MAX_OUTSTANDING_COMMANDS + 2))
85 /* ISP request and response entry counts (37-65535) */
86 #define REQUEST_ENTRY_CNT 255 /* Number of request entries. */
87 #define RESPONSE_ENTRY_CNT 63 /* Number of response entries. */
90 * SCSI Request Block structure (sp) that is placed
91 * on cmd->SCp location of every I/O
94 struct list_head list; /* (8/16) LU queue */
95 struct scsi_cmnd *cmd; /* (4/8) SCSI command block */
96 /* NOTE: the sp->cmd will be NULL when this completion is
97 * called, so you should know the scsi_cmnd when using this */
98 struct completion *wait;
99 dma_addr_t saved_dma_handle; /* for unmap of single transfers */
100 uint8_t flags; /* (1) Status flags. */
101 uint8_t dir; /* direction of transfer */
105 * SRB flag definitions
107 #define SRB_TIMEOUT (1 << 0) /* Command timed out */
108 #define SRB_SENT (1 << 1) /* Command sent to ISP */
109 #define SRB_ABORT_PENDING (1 << 2) /* Command abort sent to device */
110 #define SRB_ABORTED (1 << 3) /* Command aborted command already */
113 * ISP I/O Register Set structure definitions.
116 uint16_t id_l; /* ID low */
117 uint16_t id_h; /* ID high */
118 uint16_t cfg_0; /* Configuration 0 */
119 #define ISP_CFG0_HWMSK 0x000f /* Hardware revision mask */
120 #define ISP_CFG0_1020 BIT_0 /* ISP1020 */
121 #define ISP_CFG0_1020A BIT_1 /* ISP1020A */
122 #define ISP_CFG0_1040 BIT_2 /* ISP1040 */
123 #define ISP_CFG0_1040A BIT_3 /* ISP1040A */
124 #define ISP_CFG0_1040B BIT_4 /* ISP1040B */
125 #define ISP_CFG0_1040C BIT_5 /* ISP1040C */
126 uint16_t cfg_1; /* Configuration 1 */
127 #define ISP_CFG1_F128 BIT_6 /* 128-byte FIFO threshold */
128 #define ISP_CFG1_F64 BIT_4|BIT_5 /* 128-byte FIFO threshold */
129 #define ISP_CFG1_F32 BIT_5 /* 128-byte FIFO threshold */
130 #define ISP_CFG1_F16 BIT_4 /* 128-byte FIFO threshold */
131 #define ISP_CFG1_BENAB BIT_2 /* Global Bus burst enable */
132 #define ISP_CFG1_SXP BIT_0 /* SXP register select */
133 uint16_t ictrl; /* Interface control */
134 #define ISP_RESET BIT_0 /* ISP soft reset */
135 #define ISP_EN_INT BIT_1 /* ISP enable interrupts. */
136 #define ISP_EN_RISC BIT_2 /* ISP enable RISC interrupts. */
137 #define ISP_FLASH_ENABLE BIT_8 /* Flash BIOS Read/Write enable */
138 #define ISP_FLASH_UPPER BIT_9 /* Flash upper bank select */
139 uint16_t istatus; /* Interface status */
140 #define PCI_64BIT_SLOT BIT_14 /* PCI 64-bit slot indicator. */
141 #define RISC_INT BIT_2 /* RISC interrupt */
142 #define PCI_INT BIT_1 /* PCI interrupt */
143 uint16_t semaphore; /* Semaphore */
144 uint16_t nvram; /* NVRAM register. */
145 #define NV_DESELECT 0
146 #define NV_CLOCK BIT_0
147 #define NV_SELECT BIT_1
148 #define NV_DATA_OUT BIT_2
149 #define NV_DATA_IN BIT_3
150 uint16_t flash_data; /* Flash BIOS data */
151 uint16_t flash_address; /* Flash BIOS address */
153 uint16_t unused_1[0x06];
155 /* cdma_* and ddma_* are 1040 only */
157 #define CDMA_CONF_SENAB BIT_3 /* SXP to DMA Data enable */
158 #define CDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */
159 #define CDMA_CONF_BENAB BIT_1 /* Bus burst enable */
160 #define CDMA_CONF_DIR BIT_0 /* DMA direction (0=fifo->host 1=host->fifo) */
162 uint16_t cdma_status;
163 uint16_t cdma_fifo_status;
165 uint16_t cdma_reserved;
166 uint16_t cdma_address_count_0;
167 uint16_t cdma_address_count_1;
168 uint16_t cdma_address_count_2;
169 uint16_t cdma_address_count_3;
171 uint16_t unused_2[0x06];
174 #define DDMA_CONF_SENAB BIT_3 /* SXP to DMA Data enable */
175 #define DDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */
176 #define DDMA_CONF_BENAB BIT_1 /* Bus burst enable */
177 #define DDMA_CONF_DIR BIT_0 /* DMA direction (0=fifo->host 1=host->fifo) */
179 uint16_t ddma_status;
180 uint16_t ddma_fifo_status;
181 uint16_t ddma_xfer_count_low;
182 uint16_t ddma_xfer_count_high;
183 uint16_t ddma_addr_count_0;
184 uint16_t ddma_addr_count_1;
185 uint16_t ddma_addr_count_2;
186 uint16_t ddma_addr_count_3;
188 uint16_t unused_3[0x0e];
190 uint16_t mailbox0; /* Mailbox 0 */
191 uint16_t mailbox1; /* Mailbox 1 */
192 uint16_t mailbox2; /* Mailbox 2 */
193 uint16_t mailbox3; /* Mailbox 3 */
194 uint16_t mailbox4; /* Mailbox 4 */
195 uint16_t mailbox5; /* Mailbox 5 */
196 uint16_t mailbox6; /* Mailbox 6 */
197 uint16_t mailbox7; /* Mailbox 7 */
199 uint16_t unused_4[0x20];/* 0x80-0xbf Gap */
201 uint16_t host_cmd; /* Host command and control */
202 #define HOST_INT BIT_7 /* host interrupt bit */
203 #define BIOS_ENABLE BIT_0
205 uint16_t unused_5[0x5]; /* 0xc2-0xcb Gap */
208 uint16_t gpio_enable;
210 uint16_t unused_6[0x11]; /* d0-f0 */
211 uint16_t scsiControlPins; /* f2 */
214 #define MAILBOX_REGISTER_COUNT 8
217 * ISP product identification definitions in mailboxes after reset.
219 #define PROD_ID_1 0x4953
220 #define PROD_ID_2 0x0000
221 #define PROD_ID_2a 0x5020
222 #define PROD_ID_3 0x2020
223 #define PROD_ID_4 0x1
226 * ISP host command and control register command definitions
228 #define HC_RESET_RISC 0x1000 /* Reset RISC */
229 #define HC_PAUSE_RISC 0x2000 /* Pause RISC */
230 #define HC_RELEASE_RISC 0x3000 /* Release RISC from reset. */
231 #define HC_SET_HOST_INT 0x5000 /* Set host interrupt */
232 #define HC_CLR_HOST_INT 0x6000 /* Clear HOST interrupt */
233 #define HC_CLR_RISC_INT 0x7000 /* Clear RISC interrupt */
234 #define HC_DISABLE_BIOS 0x9000 /* Disable BIOS. */
237 * ISP mailbox Self-Test status codes
239 #define MBS_FRM_ALIVE 0 /* Firmware Alive. */
240 #define MBS_CHKSUM_ERR 1 /* Checksum Error. */
241 #define MBS_SHADOW_LD_ERR 2 /* Shadow Load Error. */
242 #define MBS_BUSY 4 /* Busy. */
245 * ISP mailbox command complete status codes
247 #define MBS_CMD_CMP 0x4000 /* Command Complete. */
248 #define MBS_INV_CMD 0x4001 /* Invalid Command. */
249 #define MBS_HOST_INF_ERR 0x4002 /* Host Interface Error. */
250 #define MBS_TEST_FAILED 0x4003 /* Test Failed. */
251 #define MBS_CMD_ERR 0x4005 /* Command Error. */
252 #define MBS_CMD_PARAM_ERR 0x4006 /* Command Parameter Error. */
255 * ISP mailbox asynchronous event status codes
257 #define MBA_ASYNC_EVENT 0x8000 /* Asynchronous event. */
258 #define MBA_BUS_RESET 0x8001 /* SCSI Bus Reset. */
259 #define MBA_SYSTEM_ERR 0x8002 /* System Error. */
260 #define MBA_REQ_TRANSFER_ERR 0x8003 /* Request Transfer Error. */
261 #define MBA_RSP_TRANSFER_ERR 0x8004 /* Response Transfer Error. */
262 #define MBA_WAKEUP_THRES 0x8005 /* Request Queue Wake-up. */
263 #define MBA_TIMEOUT_RESET 0x8006 /* Execution Timeout Reset. */
264 #define MBA_DEVICE_RESET 0x8007 /* Bus Device Reset. */
265 #define MBA_BUS_MODE_CHANGE 0x800E /* SCSI bus mode transition. */
266 #define MBA_SCSI_COMPLETION 0x8020 /* Completion response. */
269 * ISP mailbox commands
271 #define MBC_NOP 0 /* No Operation */
272 #define MBC_LOAD_RAM 1 /* Load RAM */
273 #define MBC_EXECUTE_FIRMWARE 2 /* Execute firmware */
274 #define MBC_DUMP_RAM 3 /* Dump RAM contents */
275 #define MBC_WRITE_RAM_WORD 4 /* Write ram word */
276 #define MBC_READ_RAM_WORD 5 /* Read ram word */
277 #define MBC_MAILBOX_REGISTER_TEST 6 /* Wrap incoming mailboxes */
278 #define MBC_VERIFY_CHECKSUM 7 /* Verify checksum */
279 #define MBC_ABOUT_FIRMWARE 8 /* Get firmware revision */
280 #define MBC_LOAD_RAM_A64_ROM 9 /* Load RAM 64bit ROM version */
281 #define MBC_DUMP_RAM_A64_ROM 0x0a /* Dump RAM 64bit ROM version */
282 #define MBC_INIT_REQUEST_QUEUE 0x10 /* Initialize request queue */
283 #define MBC_INIT_RESPONSE_QUEUE 0x11 /* Initialize response queue */
284 #define MBC_EXECUTE_IOCB 0x12 /* Execute IOCB command */
285 #define MBC_ABORT_COMMAND 0x15 /* Abort IOCB command */
286 #define MBC_ABORT_DEVICE 0x16 /* Abort device (ID/LUN) */
287 #define MBC_ABORT_TARGET 0x17 /* Abort target (ID) */
288 #define MBC_BUS_RESET 0x18 /* SCSI bus reset */
289 #define MBC_GET_RETRY_COUNT 0x22 /* Get retry count and delay */
290 #define MBC_GET_TARGET_PARAMETERS 0x28 /* Get target parameters */
291 #define MBC_SET_INITIATOR_ID 0x30 /* Set initiator SCSI ID */
292 #define MBC_SET_SELECTION_TIMEOUT 0x31 /* Set selection timeout */
293 #define MBC_SET_RETRY_COUNT 0x32 /* Set retry count and delay */
294 #define MBC_SET_TAG_AGE_LIMIT 0x33 /* Set tag age limit */
295 #define MBC_SET_CLOCK_RATE 0x34 /* Set clock rate */
296 #define MBC_SET_ACTIVE_NEGATION 0x35 /* Set active negation state */
297 #define MBC_SET_ASYNC_DATA_SETUP 0x36 /* Set async data setup time */
298 #define MBC_SET_PCI_CONTROL 0x37 /* Set BUS control parameters */
299 #define MBC_SET_TARGET_PARAMETERS 0x38 /* Set target parameters */
300 #define MBC_SET_DEVICE_QUEUE 0x39 /* Set device queue parameters */
301 #define MBC_SET_RESET_DELAY_PARAMETERS 0x3A /* Set reset delay parameters */
302 #define MBC_SET_SYSTEM_PARAMETER 0x45 /* Set system parameter word */
303 #define MBC_SET_FIRMWARE_FEATURES 0x4A /* Set firmware feature word */
304 #define MBC_INIT_REQUEST_QUEUE_A64 0x52 /* Initialize request queue A64 */
305 #define MBC_INIT_RESPONSE_QUEUE_A64 0x53 /* Initialize response q A64 */
306 #define MBC_ENABLE_TARGET_MODE 0x55 /* Enable target mode */
307 #define MBC_SET_DATA_OVERRUN_RECOVERY 0x5A /* Set data overrun recovery mode */
310 * ISP Get/Set Target Parameters mailbox command control flags.
312 #define TP_PPR BIT_5 /* PPR */
313 #define TP_RENEGOTIATE BIT_8 /* Renegotiate on error. */
314 #define TP_STOP_QUEUE BIT_9 /* Stop que on check condition */
315 #define TP_AUTO_REQUEST_SENSE BIT_10 /* Automatic request sense. */
316 #define TP_TAGGED_QUEUE BIT_11 /* Tagged queuing. */
317 #define TP_SYNC BIT_12 /* Synchronous data transfers. */
318 #define TP_WIDE BIT_13 /* Wide data transfers. */
319 #define TP_PARITY BIT_14 /* Parity checking. */
320 #define TP_DISCONNECT BIT_15 /* Disconnect privilege. */
323 * NVRAM Command values.
325 #define NV_START_BIT BIT_2
326 #define NV_WRITE_OP (BIT_26 | BIT_24)
327 #define NV_READ_OP (BIT_26 | BIT_25)
328 #define NV_ERASE_OP (BIT_26 | BIT_25 | BIT_24)
329 #define NV_MASK_OP (BIT_26 | BIT_25 | BIT_24)
330 #define NV_DELAY_COUNT 10
333 * QLogic ISP1280/ISP12160 NVRAM structure definition.
340 uint8_t version; /* 4 */
343 uint8_t bios_configuration_mode:2;
344 uint8_t bios_disable:1;
345 uint8_t selectable_scsi_boot_enable:1;
346 uint8_t cd_rom_boot_enable:1;
347 uint8_t disable_loading_risc_code:1;
348 uint8_t enable_64bit_addressing:1;
350 } cntr_flags_1; /* 5 */
353 uint8_t boot_lun_number:5;
354 uint8_t scsi_bus_number:1;
357 } cntr_flags_2l; /* 7 */
360 uint8_t boot_target_number:4;
365 } cntr_flags_2h; /* 8 */
367 uint16_t unused_8; /* 8, 9 */
368 uint16_t unused_10; /* 10, 11 */
369 uint16_t unused_12; /* 12, 13 */
370 uint16_t unused_14; /* 14, 15 */
374 uint8_t burst_enable:1;
375 uint8_t reserved_1:1;
376 uint8_t fifo_threshold:4;
377 } isp_config; /* 16 */
380 * 0 = Disable, 1 = high only, 3 = Auto term
383 uint8_t scsi_bus_1_control:2;
384 uint8_t scsi_bus_0_control:2;
388 uint8_t auto_term_support:1;
389 } termination; /* 17 */
391 uint16_t isp_parameter; /* 18, 19 */
396 uint16_t enable_fast_posting:1;
397 uint16_t report_lvd_bus_transition:1;
400 uint16_t disable_iosbs_with_bus_reset_status:1;
401 uint16_t disable_synchronous_backoff:1;
403 uint16_t synchronous_backoff_reporting:1;
404 uint16_t disable_reselection_fairness:1;
406 uint16_t unused_10:1;
407 uint16_t unused_11:1;
408 uint16_t unused_12:1;
409 uint16_t unused_13:1;
410 uint16_t unused_14:1;
411 uint16_t unused_15:1;
413 } firmware_feature; /* 20, 21 */
415 uint16_t unused_22; /* 22, 23 */
419 uint8_t initiator_id:4;
420 uint8_t scsi_reset_disable:1;
421 uint8_t scsi_bus_size:1;
422 uint8_t scsi_bus_type:1;
426 uint8_t bus_reset_delay; /* 25 */
427 uint8_t retry_count; /* 26 */
428 uint8_t retry_delay; /* 27 */
431 uint8_t async_data_setup_time:4;
432 uint8_t req_ack_active_negation:1;
433 uint8_t data_line_active_negation:1;
438 uint8_t unused_29; /* 29 */
440 uint16_t selection_timeout; /* 30, 31 */
441 uint16_t max_queue_depth; /* 32, 33 */
443 uint16_t unused_34; /* 34, 35 */
444 uint16_t unused_36; /* 36, 37 */
445 uint16_t unused_38; /* 38, 39 */
449 uint8_t renegotiate_on_error:1;
450 uint8_t stop_queue_on_check:1;
451 uint8_t auto_request_sense:1;
452 uint8_t tag_queuing:1;
453 uint8_t enable_sync:1;
454 uint8_t enable_wide:1;
455 uint8_t parity_checking:1;
456 uint8_t disconnect_allowed:1;
457 } parameter; /* 40 */
459 uint8_t execution_throttle; /* 41 */
460 uint8_t sync_period; /* 42 */
465 uint8_t sync_offset:4;
466 uint8_t device_enable:1;
467 uint8_t lun_disable:1;
472 uint8_t sync_offset:5;
473 uint8_t device_enable:1;
478 union { /* PPR flags for the 1x160 controllers */
481 uint8_t ppr_options:4;
482 uint8_t ppr_bus_width:2;
484 uint8_t enable_ppr:1;
487 uint8_t unused_45; /* 45 */
488 } target[MAX_TARGETS];
491 uint16_t unused_248; /* 248, 249 */
493 uint16_t subsystem_id[2]; /* 250, 251, 252, 253 */
497 uint8_t system_id_pointer;
500 uint8_t chksum; /* 255 */
504 * ISP queue - command entry structure definition.
506 #define MAX_CMDSZ 12 /* SCSI maximum CDB size. */
508 uint8_t entry_type; /* Entry type. */
509 #define COMMAND_TYPE 1 /* Command entry */
510 uint8_t entry_count; /* Entry count. */
511 uint8_t sys_define; /* System defined. */
512 uint8_t entry_status; /* Entry Status. */
513 __le32 handle; /* System handle. */
514 uint8_t lun; /* SCSI LUN */
515 uint8_t target; /* SCSI ID */
516 __le16 cdb_len; /* SCSI command length. */
517 __le16 control_flags; /* Control flags. */
519 __le16 timeout; /* Command timeout. */
520 __le16 dseg_count; /* Data segment count. */
521 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */
522 __le32 dseg_0_address; /* Data segment 0 address. */
523 __le32 dseg_0_length; /* Data segment 0 length. */
524 __le32 dseg_1_address; /* Data segment 1 address. */
525 __le32 dseg_1_length; /* Data segment 1 length. */
526 __le32 dseg_2_address; /* Data segment 2 address. */
527 __le32 dseg_2_length; /* Data segment 2 length. */
528 __le32 dseg_3_address; /* Data segment 3 address. */
529 __le32 dseg_3_length; /* Data segment 3 length. */
533 * ISP queue - continuation entry structure definition.
536 uint8_t entry_type; /* Entry type. */
537 #define CONTINUE_TYPE 2 /* Continuation entry. */
538 uint8_t entry_count; /* Entry count. */
539 uint8_t sys_define; /* System defined. */
540 uint8_t entry_status; /* Entry Status. */
541 __le32 reserved; /* Reserved */
542 __le32 dseg_0_address; /* Data segment 0 address. */
543 __le32 dseg_0_length; /* Data segment 0 length. */
544 __le32 dseg_1_address; /* Data segment 1 address. */
545 __le32 dseg_1_length; /* Data segment 1 length. */
546 __le32 dseg_2_address; /* Data segment 2 address. */
547 __le32 dseg_2_length; /* Data segment 2 length. */
548 __le32 dseg_3_address; /* Data segment 3 address. */
549 __le32 dseg_3_length; /* Data segment 3 length. */
550 __le32 dseg_4_address; /* Data segment 4 address. */
551 __le32 dseg_4_length; /* Data segment 4 length. */
552 __le32 dseg_5_address; /* Data segment 5 address. */
553 __le32 dseg_5_length; /* Data segment 5 length. */
554 __le32 dseg_6_address; /* Data segment 6 address. */
555 __le32 dseg_6_length; /* Data segment 6 length. */
559 * ISP queue - status entry structure definition.
562 uint8_t entry_type; /* Entry type. */
563 #define STATUS_TYPE 3 /* Status entry. */
564 uint8_t entry_count; /* Entry count. */
565 uint8_t sys_define; /* System defined. */
566 uint8_t entry_status; /* Entry Status. */
567 #define RF_CONT BIT_0 /* Continuation. */
568 #define RF_FULL BIT_1 /* Full */
569 #define RF_BAD_HEADER BIT_2 /* Bad header. */
570 #define RF_BAD_PAYLOAD BIT_3 /* Bad payload. */
571 __le32 handle; /* System handle. */
572 __le16 scsi_status; /* SCSI status. */
573 __le16 comp_status; /* Completion status. */
574 __le16 state_flags; /* State flags. */
575 #define SF_TRANSFER_CMPL BIT_14 /* Transfer Complete. */
576 #define SF_GOT_SENSE BIT_13 /* Got Sense */
577 #define SF_GOT_STATUS BIT_12 /* Got Status */
578 #define SF_TRANSFERRED_DATA BIT_11 /* Transferred data */
579 #define SF_SENT_CDB BIT_10 /* Send CDB */
580 #define SF_GOT_TARGET BIT_9 /* */
581 #define SF_GOT_BUS BIT_8 /* */
582 __le16 status_flags; /* Status flags. */
583 __le16 time; /* Time. */
584 __le16 req_sense_length;/* Request sense data length. */
585 __le32 residual_length; /* Residual transfer length. */
587 uint8_t req_sense_data[32]; /* Request sense data. */
591 * ISP queue - marker entry structure definition.
594 uint8_t entry_type; /* Entry type. */
595 #define MARKER_TYPE 4 /* Marker entry. */
596 uint8_t entry_count; /* Entry count. */
597 uint8_t sys_define; /* System defined. */
598 uint8_t entry_status; /* Entry Status. */
600 uint8_t lun; /* SCSI LUN */
601 uint8_t target; /* SCSI ID */
602 uint8_t modifier; /* Modifier (7-0). */
603 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */
604 #define MK_SYNC_ID 1 /* Synchronize ID */
605 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */
606 uint8_t reserved_1[53];
610 * ISP queue - extended command entry structure definition.
612 * Unused by the driver!
615 uint8_t entry_type; /* Entry type. */
616 #define EXTENDED_CMD_TYPE 5 /* Extended command entry. */
617 uint8_t entry_count; /* Entry count. */
618 uint8_t sys_define; /* System defined. */
619 uint8_t entry_status; /* Entry Status. */
620 uint32_t handle; /* System handle. */
621 uint8_t lun; /* SCSI LUN */
622 uint8_t target; /* SCSI ID */
623 __le16 cdb_len; /* SCSI command length. */
624 __le16 control_flags; /* Control flags. */
626 __le16 timeout; /* Command timeout. */
627 __le16 dseg_count; /* Data segment count. */
628 uint8_t scsi_cdb[88]; /* SCSI command words. */
632 * ISP queue - 64-Bit addressing, command entry structure definition.
635 uint8_t entry_type; /* Entry type. */
636 #define COMMAND_A64_TYPE 9 /* Command A64 entry */
637 uint8_t entry_count; /* Entry count. */
638 uint8_t sys_define; /* System defined. */
639 uint8_t entry_status; /* Entry Status. */
640 __le32 handle; /* System handle. */
641 uint8_t lun; /* SCSI LUN */
642 uint8_t target; /* SCSI ID */
643 __le16 cdb_len; /* SCSI command length. */
644 __le16 control_flags; /* Control flags. */
646 __le16 timeout; /* Command timeout. */
647 __le16 dseg_count; /* Data segment count. */
648 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */
649 __le32 reserved_1[2]; /* unused */
650 __le32 dseg_0_address[2]; /* Data segment 0 address. */
651 __le32 dseg_0_length; /* Data segment 0 length. */
652 __le32 dseg_1_address[2]; /* Data segment 1 address. */
653 __le32 dseg_1_length; /* Data segment 1 length. */
654 } cmd_a64_entry_t, request_t;
657 * ISP queue - 64-Bit addressing, continuation entry structure definition.
659 struct cont_a64_entry {
660 uint8_t entry_type; /* Entry type. */
661 #define CONTINUE_A64_TYPE 0xA /* Continuation A64 entry. */
662 uint8_t entry_count; /* Entry count. */
663 uint8_t sys_define; /* System defined. */
664 uint8_t entry_status; /* Entry Status. */
665 __le32 dseg_0_address[2]; /* Data segment 0 address. */
666 __le32 dseg_0_length; /* Data segment 0 length. */
667 __le32 dseg_1_address[2]; /* Data segment 1 address. */
668 __le32 dseg_1_length; /* Data segment 1 length. */
669 __le32 dseg_2_address[2]; /* Data segment 2 address. */
670 __le32 dseg_2_length; /* Data segment 2 length. */
671 __le32 dseg_3_address[2]; /* Data segment 3 address. */
672 __le32 dseg_3_length; /* Data segment 3 length. */
673 __le32 dseg_4_address[2]; /* Data segment 4 address. */
674 __le32 dseg_4_length; /* Data segment 4 length. */
678 * ISP queue - enable LUN entry structure definition.
681 uint8_t entry_type; /* Entry type. */
682 #define ENABLE_LUN_TYPE 0xB /* Enable LUN entry. */
683 uint8_t entry_count; /* Entry count. */
685 uint8_t entry_status; /* Entry Status not used. */
687 __le16 lun; /* Bit 15 is bus number. */
692 uint8_t command_count; /* Number of ATIOs allocated. */
693 uint8_t immed_notify_count; /* Number of Immediate Notify */
694 /* entries allocated. */
695 uint8_t group_6_length; /* SCSI CDB length for group 6 */
696 /* commands (2-26). */
697 uint8_t group_7_length; /* SCSI CDB length for group 7 */
698 /* commands (2-26). */
699 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
700 __le16 reserved_6[20];
704 * ISP queue - modify LUN entry structure definition.
706 * Unused by the driver!
708 struct modify_lun_entry {
709 uint8_t entry_type; /* Entry type. */
710 #define MODIFY_LUN_TYPE 0xC /* Modify LUN entry. */
711 uint8_t entry_count; /* Entry count. */
713 uint8_t entry_status; /* Entry Status. */
715 uint8_t lun; /* SCSI LUN */
722 uint8_t command_count; /* Number of ATIOs allocated. */
723 uint8_t immed_notify_count; /* Number of Immediate Notify */
724 /* entries allocated. */
726 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
727 __le16 reserved_7[20];
731 * ISP queue - immediate notify entry structure definition.
733 struct notify_entry {
734 uint8_t entry_type; /* Entry type. */
735 #define IMMED_NOTIFY_TYPE 0xD /* Immediate notify entry. */
736 uint8_t entry_count; /* Entry count. */
738 uint8_t entry_status; /* Entry Status. */
741 uint8_t initiator_id;
747 uint8_t tag_value; /* Received queue tag message value */
748 uint8_t tag_type; /* Received queue tag message type */
749 /* entries allocated. */
751 uint8_t scsi_msg[8]; /* SCSI message not handled by ISP */
752 __le16 reserved_5[8];
753 uint8_t sense_data[18];
757 * ISP queue - notify acknowledge entry structure definition.
760 uint8_t entry_type; /* Entry type. */
761 #define NOTIFY_ACK_TYPE 0xE /* Notify acknowledge entry. */
762 uint8_t entry_count; /* Entry count. */
764 uint8_t entry_status; /* Entry Status. */
767 uint8_t initiator_id;
774 __le16 reserved_4[22];
778 * ISP queue - Accept Target I/O (ATIO) entry structure definition.
781 uint8_t entry_type; /* Entry type. */
782 #define ACCEPT_TGT_IO_TYPE 6 /* Accept target I/O entry. */
783 uint8_t entry_count; /* Entry count. */
785 uint8_t entry_status; /* Entry Status. */
788 uint8_t initiator_id;
794 uint8_t tag_value; /* Received queue tag message value */
795 uint8_t tag_type; /* Received queue tag message type */
797 uint8_t sense_data[18];
801 * ISP queue - Continue Target I/O (CTIO) entry structure definition.
804 uint8_t entry_type; /* Entry type. */
805 #define CONTINUE_TGT_IO_TYPE 7 /* CTIO entry */
806 uint8_t entry_count; /* Entry count. */
808 uint8_t entry_status; /* Entry Status. */
810 uint8_t lun; /* SCSI LUN */
811 uint8_t initiator_id;
817 uint8_t tag_value; /* Received queue tag message value */
818 uint8_t tag_type; /* Received queue tag message type */
819 __le32 transfer_length;
821 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
822 __le16 dseg_count; /* Data segment count. */
823 __le32 dseg_0_address; /* Data segment 0 address. */
824 __le32 dseg_0_length; /* Data segment 0 length. */
825 __le32 dseg_1_address; /* Data segment 1 address. */
826 __le32 dseg_1_length; /* Data segment 1 length. */
827 __le32 dseg_2_address; /* Data segment 2 address. */
828 __le32 dseg_2_length; /* Data segment 2 length. */
829 __le32 dseg_3_address; /* Data segment 3 address. */
830 __le32 dseg_3_length; /* Data segment 3 length. */
834 * ISP queue - CTIO returned entry structure definition.
836 struct ctio_ret_entry {
837 uint8_t entry_type; /* Entry type. */
838 #define CTIO_RET_TYPE 7 /* CTIO return entry */
839 uint8_t entry_count; /* Entry count. */
841 uint8_t entry_status; /* Entry Status. */
843 uint8_t lun; /* SCSI LUN */
844 uint8_t initiator_id;
850 uint8_t tag_value; /* Received queue tag message value */
851 uint8_t tag_type; /* Received queue tag message type */
852 __le32 transfer_length;
854 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
855 __le16 dseg_count; /* Data segment count. */
856 __le32 dseg_0_address; /* Data segment 0 address. */
857 __le32 dseg_0_length; /* Data segment 0 length. */
858 __le32 dseg_1_address; /* Data segment 1 address. */
859 __le16 dseg_1_length; /* Data segment 1 length. */
860 uint8_t sense_data[18];
864 * ISP queue - CTIO A64 entry structure definition.
866 struct ctio_a64_entry {
867 uint8_t entry_type; /* Entry type. */
868 #define CTIO_A64_TYPE 0xF /* CTIO A64 entry */
869 uint8_t entry_count; /* Entry count. */
871 uint8_t entry_status; /* Entry Status. */
873 uint8_t lun; /* SCSI LUN */
874 uint8_t initiator_id;
880 uint8_t tag_value; /* Received queue tag message value */
881 uint8_t tag_type; /* Received queue tag message type */
882 __le32 transfer_length;
884 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
885 __le16 dseg_count; /* Data segment count. */
886 __le32 reserved_4[2];
887 __le32 dseg_0_address[2];/* Data segment 0 address. */
888 __le32 dseg_0_length; /* Data segment 0 length. */
889 __le32 dseg_1_address[2];/* Data segment 1 address. */
890 __le32 dseg_1_length; /* Data segment 1 length. */
894 * ISP queue - CTIO returned entry structure definition.
896 struct ctio_a64_ret_entry {
897 uint8_t entry_type; /* Entry type. */
898 #define CTIO_A64_RET_TYPE 0xF /* CTIO A64 returned entry */
899 uint8_t entry_count; /* Entry count. */
901 uint8_t entry_status; /* Entry Status. */
903 uint8_t lun; /* SCSI LUN */
904 uint8_t initiator_id;
910 uint8_t tag_value; /* Received queue tag message value */
911 uint8_t tag_type; /* Received queue tag message type */
912 __le32 transfer_length;
914 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
915 __le16 dseg_count; /* Data segment count. */
916 __le16 reserved_4[7];
917 uint8_t sense_data[18];
921 * ISP request and response queue entry sizes
923 #define RESPONSE_ENTRY_SIZE (sizeof(struct response))
924 #define REQUEST_ENTRY_SIZE (sizeof(request_t))
927 * ISP status entry - completion status definitions.
929 #define CS_COMPLETE 0x0 /* No errors */
930 #define CS_INCOMPLETE 0x1 /* Incomplete transfer of cmd. */
931 #define CS_DMA 0x2 /* A DMA direction error. */
932 #define CS_TRANSPORT 0x3 /* Transport error. */
933 #define CS_RESET 0x4 /* SCSI bus reset occurred */
934 #define CS_ABORTED 0x5 /* System aborted command. */
935 #define CS_TIMEOUT 0x6 /* Timeout error. */
936 #define CS_DATA_OVERRUN 0x7 /* Data overrun. */
937 #define CS_COMMAND_OVERRUN 0x8 /* Command Overrun. */
938 #define CS_STATUS_OVERRUN 0x9 /* Status Overrun. */
939 #define CS_BAD_MSG 0xA /* Bad msg after status phase. */
940 #define CS_NO_MSG_OUT 0xB /* No msg out after selection. */
941 #define CS_EXTENDED_ID 0xC /* Extended ID failed. */
942 #define CS_IDE_MSG 0xD /* Target rejected IDE msg. */
943 #define CS_ABORT_MSG 0xE /* Target rejected abort msg. */
944 #define CS_REJECT_MSG 0xF /* Target rejected reject msg. */
945 #define CS_NOP_MSG 0x10 /* Target rejected NOP msg. */
946 #define CS_PARITY_MSG 0x11 /* Target rejected parity msg. */
947 #define CS_DEV_RESET_MSG 0x12 /* Target rejected dev rst msg. */
948 #define CS_ID_MSG 0x13 /* Target rejected ID msg. */
949 #define CS_FREE 0x14 /* Unexpected bus free. */
950 #define CS_DATA_UNDERRUN 0x15 /* Data Underrun. */
951 #define CS_TRANACTION_1 0x18 /* Transaction error 1 */
952 #define CS_TRANACTION_2 0x19 /* Transaction error 2 */
953 #define CS_TRANACTION_3 0x1a /* Transaction error 3 */
954 #define CS_INV_ENTRY_TYPE 0x1b /* Invalid entry type */
955 #define CS_DEV_QUEUE_FULL 0x1c /* Device queue full */
956 #define CS_PHASED_SKIPPED 0x1d /* SCSI phase skipped */
957 #define CS_ARS_FAILED 0x1e /* ARS failed */
958 #define CS_LVD_BUS_ERROR 0x21 /* LVD bus error */
959 #define CS_BAD_PAYLOAD 0x80 /* Driver defined */
960 #define CS_UNKNOWN 0x81 /* Driver defined */
961 #define CS_RETRY 0x82 /* Driver defined */
964 * ISP target entries - Option flags bit definitions.
966 #define OF_ENABLE_TAG BIT_1 /* Tagged queue action enable */
967 #define OF_DATA_IN BIT_6 /* Data in to initiator */
968 /* (data from target to initiator) */
969 #define OF_DATA_OUT BIT_7 /* Data out from initiator */
970 /* (data from initiator to target) */
971 #define OF_NO_DATA (BIT_7 | BIT_6)
972 #define OF_DISC_DISABLED BIT_15 /* Disconnects disabled */
973 #define OF_DISABLE_SDP BIT_24 /* Disable sending save data ptr */
974 #define OF_SEND_RDP BIT_26 /* Send restore data pointers msg */
975 #define OF_FORCE_DISC BIT_30 /* Disconnects mandatory */
976 #define OF_SSTS BIT_31 /* Send SCSI status */
980 * BUS parameters/settings structure - UNUSED
983 uint8_t id; /* Host adapter SCSI id */
984 uint8_t bus_reset_delay; /* SCSI bus reset delay. */
985 uint8_t failed_reset_count; /* number of time reset failed */
987 uint16_t device_enables; /* Device enable bits. */
988 uint16_t lun_disables; /* LUN disable bits. */
989 uint16_t qtag_enables; /* Tag queue enables. */
990 uint16_t hiwat; /* High water mark per device. */
991 uint8_t reset_marker:1;
992 uint8_t disable_scsi_reset:1;
993 uint8_t scsi_bus_dead:1; /* SCSI Bus is Dead, when 5 back to back resets failed */
997 struct qla_driver_setup {
1001 uint32_t no_nvram:1;
1009 * Linux Host Adapter structure
1011 struct scsi_qla_host {
1012 /* Linux adapter configuration data */
1013 struct Scsi_Host *host; /* pointer to host data */
1014 struct scsi_qla_host *next;
1015 struct device_reg __iomem *iobase; /* Base Memory-mapped I/O address */
1017 unsigned char __iomem *mmpbase; /* memory mapped address */
1018 unsigned long host_no;
1019 struct pci_dev *pdev;
1024 unsigned long actthreads;
1025 unsigned long isr_count; /* Interrupt count */
1026 unsigned long spurious_int;
1028 /* Outstandings ISP commands. */
1029 struct srb *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
1031 /* BUS configuration data */
1032 struct bus_param bus_settings[MAX_BUSES];
1034 /* Received ISP mailbox data. */
1035 volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];
1037 dma_addr_t request_dma; /* Physical Address */
1038 request_t *request_ring; /* Base virtual address */
1039 request_t *request_ring_ptr; /* Current address. */
1040 uint16_t req_ring_index; /* Current index. */
1041 uint16_t req_q_cnt; /* Number of available entries. */
1043 dma_addr_t response_dma; /* Physical address. */
1044 struct response *response_ring; /* Base virtual address */
1045 struct response *response_ring_ptr; /* Current address. */
1046 uint16_t rsp_ring_index; /* Current index. */
1048 struct list_head done_q; /* Done queue */
1050 struct completion *mailbox_wait;
1051 struct timer_list mailbox_timer;
1054 uint32_t online:1; /* 0 */
1055 uint32_t reset_marker:1; /* 1 */
1056 uint32_t disable_host_adapter:1; /* 2 */
1057 uint32_t reset_active:1; /* 3 */
1058 uint32_t abort_isp_active:1; /* 4 */
1059 uint32_t disable_risc_code_load:1; /* 5 */
1066 unsigned short fwstart; /* start address for F/W */
1067 unsigned char fwver1; /* F/W version first char */
1068 unsigned char fwver2; /* F/W version second char */
1069 unsigned char fwver3; /* F/W version third char */
1072 #endif /* _QLA1280_H */