1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
6 * Copyright (C) 2004-2016 Emulex. All rights reserved. *
7 * EMULEX and SLI are trademarks of Emulex. *
9 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
11 * This program is free software; you can redistribute it and/or *
12 * modify it under the terms of version 2 of the GNU General *
13 * Public License as published by the Free Software Foundation. *
14 * This program is distributed in the hope that it will be useful. *
15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19 * TO BE LEGALLY INVALID. See the GNU General Public License for *
20 * more details, a copy of which can be found in the file COPYING *
21 * included with this package. *
22 *******************************************************************/
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/idr.h>
28 #include <linux/interrupt.h>
29 #include <linux/module.h>
30 #include <linux/kthread.h>
31 #include <linux/pci.h>
32 #include <linux/spinlock.h>
33 #include <linux/ctype.h>
34 #include <linux/aer.h>
35 #include <linux/slab.h>
36 #include <linux/firmware.h>
37 #include <linux/miscdevice.h>
38 #include <linux/percpu.h>
39 #include <linux/msi.h>
40 #include <linux/irq.h>
41 #include <linux/bitops.h>
42 #include <linux/crash_dump.h>
43 #include <linux/cpu.h>
44 #include <linux/cpuhotplug.h>
46 #include <scsi/scsi.h>
47 #include <scsi/scsi_device.h>
48 #include <scsi/scsi_host.h>
49 #include <scsi/scsi_transport_fc.h>
50 #include <scsi/scsi_tcq.h>
51 #include <scsi/fc/fc_fs.h>
56 #include "lpfc_sli4.h"
58 #include "lpfc_disc.h"
60 #include "lpfc_scsi.h"
61 #include "lpfc_nvme.h"
62 #include "lpfc_logmsg.h"
63 #include "lpfc_crtn.h"
64 #include "lpfc_vport.h"
65 #include "lpfc_version.h"
68 static enum cpuhp_state lpfc_cpuhp_state;
69 /* Used when mapping IRQ vectors in a driver centric manner */
70 static uint32_t lpfc_present_cpu;
72 static void __lpfc_cpuhp_remove(struct lpfc_hba *phba);
73 static void lpfc_cpuhp_remove(struct lpfc_hba *phba);
74 static void lpfc_cpuhp_add(struct lpfc_hba *phba);
75 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
76 static int lpfc_post_rcv_buf(struct lpfc_hba *);
77 static int lpfc_sli4_queue_verify(struct lpfc_hba *);
78 static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
79 static int lpfc_setup_endian_order(struct lpfc_hba *);
80 static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
81 static void lpfc_free_els_sgl_list(struct lpfc_hba *);
82 static void lpfc_free_nvmet_sgl_list(struct lpfc_hba *);
83 static void lpfc_init_sgl_list(struct lpfc_hba *);
84 static int lpfc_init_active_sgl_array(struct lpfc_hba *);
85 static void lpfc_free_active_sgl(struct lpfc_hba *);
86 static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
87 static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
88 static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
89 static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
90 static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
91 static void lpfc_sli4_disable_intr(struct lpfc_hba *);
92 static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t);
93 static void lpfc_sli4_oas_verify(struct lpfc_hba *phba);
94 static uint16_t lpfc_find_cpu_handle(struct lpfc_hba *, uint16_t, int);
95 static void lpfc_setup_bg(struct lpfc_hba *, struct Scsi_Host *);
97 static struct scsi_transport_template *lpfc_transport_template = NULL;
98 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
99 static DEFINE_IDR(lpfc_hba_index);
100 #define LPFC_NVMET_BUF_POST 254
103 * lpfc_config_port_prep - Perform lpfc initialization prior to config port
104 * @phba: pointer to lpfc hba data structure.
106 * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
107 * mailbox command. It retrieves the revision information from the HBA and
108 * collects the Vital Product Data (VPD) about the HBA for preparing the
109 * configuration of the HBA.
113 * -ERESTART - requests the SLI layer to reset the HBA and try again.
114 * Any other value - indicates an error.
117 lpfc_config_port_prep(struct lpfc_hba *phba)
119 lpfc_vpd_t *vp = &phba->vpd;
123 char *lpfc_vpd_data = NULL;
125 static char licensed[56] =
126 "key unlock for use with gnu public licensed code only\0";
127 static int init_key = 1;
129 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
131 phba->link_state = LPFC_HBA_ERROR;
136 phba->link_state = LPFC_INIT_MBX_CMDS;
138 if (lpfc_is_LC_HBA(phba->pcidev->device)) {
140 uint32_t *ptext = (uint32_t *) licensed;
142 for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
143 *ptext = cpu_to_be32(*ptext);
147 lpfc_read_nv(phba, pmb);
148 memset((char*)mb->un.varRDnvp.rsvd3, 0,
149 sizeof (mb->un.varRDnvp.rsvd3));
150 memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
153 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
155 if (rc != MBX_SUCCESS) {
156 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
157 "0324 Config Port initialization "
158 "error, mbxCmd x%x READ_NVPARM, "
160 mb->mbxCommand, mb->mbxStatus);
161 mempool_free(pmb, phba->mbox_mem_pool);
164 memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
166 memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
171 * Clear all option bits except LPFC_SLI3_BG_ENABLED,
172 * which was already set in lpfc_get_cfgparam()
174 phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;
176 /* Setup and issue mailbox READ REV command */
177 lpfc_read_rev(phba, pmb);
178 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
179 if (rc != MBX_SUCCESS) {
180 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
181 "0439 Adapter failed to init, mbxCmd x%x "
182 "READ_REV, mbxStatus x%x\n",
183 mb->mbxCommand, mb->mbxStatus);
184 mempool_free( pmb, phba->mbox_mem_pool);
190 * The value of rr must be 1 since the driver set the cv field to 1.
191 * This setting requires the FW to set all revision fields.
193 if (mb->un.varRdRev.rr == 0) {
195 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
196 "0440 Adapter failed to init, READ_REV has "
197 "missing revision information.\n");
198 mempool_free(pmb, phba->mbox_mem_pool);
202 if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
203 mempool_free(pmb, phba->mbox_mem_pool);
207 /* Save information as VPD data */
209 memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
210 vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
211 memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
212 vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
213 memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
214 vp->rev.biuRev = mb->un.varRdRev.biuRev;
215 vp->rev.smRev = mb->un.varRdRev.smRev;
216 vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
217 vp->rev.endecRev = mb->un.varRdRev.endecRev;
218 vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
219 vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
220 vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
221 vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
222 vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
223 vp->rev.opFwRev = mb->un.varRdRev.opFwRev;
225 /* If the sli feature level is less then 9, we must
226 * tear down all RPIs and VPIs on link down if NPIV
229 if (vp->rev.feaLevelHigh < 9)
230 phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;
232 if (lpfc_is_LC_HBA(phba->pcidev->device))
233 memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
234 sizeof (phba->RandomData));
236 /* Get adapter VPD information */
237 lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
241 lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
242 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
244 if (rc != MBX_SUCCESS) {
245 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
246 "0441 VPD not present on adapter, "
247 "mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
248 mb->mbxCommand, mb->mbxStatus);
249 mb->un.varDmp.word_cnt = 0;
251 /* dump mem may return a zero when finished or we got a
252 * mailbox error, either way we are done.
254 if (mb->un.varDmp.word_cnt == 0)
257 i = mb->un.varDmp.word_cnt * sizeof(uint32_t);
258 if (offset + i > DMP_VPD_SIZE)
259 i = DMP_VPD_SIZE - offset;
260 lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
261 lpfc_vpd_data + offset, i);
263 } while (offset < DMP_VPD_SIZE);
265 lpfc_parse_vpd(phba, lpfc_vpd_data, offset);
267 kfree(lpfc_vpd_data);
269 mempool_free(pmb, phba->mbox_mem_pool);
274 * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
275 * @phba: pointer to lpfc hba data structure.
276 * @pmboxq: pointer to the driver internal queue element for mailbox command.
278 * This is the completion handler for driver's configuring asynchronous event
279 * mailbox command to the device. If the mailbox command returns successfully,
280 * it will set internal async event support flag to 1; otherwise, it will
281 * set internal async event support flag to 0.
284 lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
286 if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
287 phba->temp_sensor_support = 1;
289 phba->temp_sensor_support = 0;
290 mempool_free(pmboxq, phba->mbox_mem_pool);
295 * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
296 * @phba: pointer to lpfc hba data structure.
297 * @pmboxq: pointer to the driver internal queue element for mailbox command.
299 * This is the completion handler for dump mailbox command for getting
300 * wake up parameters. When this command complete, the response contain
301 * Option rom version of the HBA. This function translate the version number
302 * into a human readable string and store it in OptionROMVersion.
305 lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
308 uint32_t prog_id_word;
310 /* character array used for decoding dist type. */
311 char dist_char[] = "nabx";
313 if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
314 mempool_free(pmboxq, phba->mbox_mem_pool);
318 prg = (struct prog_id *) &prog_id_word;
320 /* word 7 contain option rom version */
321 prog_id_word = pmboxq->u.mb.un.varWords[7];
323 /* Decode the Option rom version word to a readable string */
325 dist = dist_char[prg->dist];
327 if ((prg->dist == 3) && (prg->num == 0))
328 snprintf(phba->OptionROMVersion, 32, "%d.%d%d",
329 prg->ver, prg->rev, prg->lev);
331 snprintf(phba->OptionROMVersion, 32, "%d.%d%d%c%d",
332 prg->ver, prg->rev, prg->lev,
334 mempool_free(pmboxq, phba->mbox_mem_pool);
339 * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname,
340 * cfg_soft_wwnn, cfg_soft_wwpn
341 * @vport: pointer to lpfc vport data structure.
348 lpfc_update_vport_wwn(struct lpfc_vport *vport)
350 uint8_t vvvl = vport->fc_sparam.cmn.valid_vendor_ver_level;
351 u32 *fawwpn_key = (u32 *)&vport->fc_sparam.un.vendorVersion[0];
353 /* If the soft name exists then update it using the service params */
354 if (vport->phba->cfg_soft_wwnn)
355 u64_to_wwn(vport->phba->cfg_soft_wwnn,
356 vport->fc_sparam.nodeName.u.wwn);
357 if (vport->phba->cfg_soft_wwpn)
358 u64_to_wwn(vport->phba->cfg_soft_wwpn,
359 vport->fc_sparam.portName.u.wwn);
362 * If the name is empty or there exists a soft name
363 * then copy the service params name, otherwise use the fc name
365 if (vport->fc_nodename.u.wwn[0] == 0 || vport->phba->cfg_soft_wwnn)
366 memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
367 sizeof(struct lpfc_name));
369 memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename,
370 sizeof(struct lpfc_name));
373 * If the port name has changed, then set the Param changes flag
376 if (vport->fc_portname.u.wwn[0] != 0 &&
377 memcmp(&vport->fc_portname, &vport->fc_sparam.portName,
378 sizeof(struct lpfc_name)))
379 vport->vport_flag |= FAWWPN_PARAM_CHG;
381 if (vport->fc_portname.u.wwn[0] == 0 ||
382 vport->phba->cfg_soft_wwpn ||
383 (vvvl == 1 && cpu_to_be32(*fawwpn_key) == FAPWWN_KEY_VENDOR) ||
384 vport->vport_flag & FAWWPN_SET) {
385 memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
386 sizeof(struct lpfc_name));
387 vport->vport_flag &= ~FAWWPN_SET;
388 if (vvvl == 1 && cpu_to_be32(*fawwpn_key) == FAPWWN_KEY_VENDOR)
389 vport->vport_flag |= FAWWPN_SET;
392 memcpy(&vport->fc_sparam.portName, &vport->fc_portname,
393 sizeof(struct lpfc_name));
397 * lpfc_config_port_post - Perform lpfc initialization after config port
398 * @phba: pointer to lpfc hba data structure.
400 * This routine will do LPFC initialization after the CONFIG_PORT mailbox
401 * command call. It performs all internal resource and state setups on the
402 * port: post IOCB buffers, enable appropriate host interrupt attentions,
403 * ELS ring timers, etc.
407 * Any other value - error.
410 lpfc_config_port_post(struct lpfc_hba *phba)
412 struct lpfc_vport *vport = phba->pport;
413 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
416 struct lpfc_dmabuf *mp;
417 struct lpfc_sli *psli = &phba->sli;
418 uint32_t status, timeout;
422 spin_lock_irq(&phba->hbalock);
424 * If the Config port completed correctly the HBA is not
425 * over heated any more.
427 if (phba->over_temp_state == HBA_OVER_TEMP)
428 phba->over_temp_state = HBA_NORMAL_TEMP;
429 spin_unlock_irq(&phba->hbalock);
431 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
433 phba->link_state = LPFC_HBA_ERROR;
438 /* Get login parameters for NID. */
439 rc = lpfc_read_sparam(phba, pmb, 0);
441 mempool_free(pmb, phba->mbox_mem_pool);
446 if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
447 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
448 "0448 Adapter failed init, mbxCmd x%x "
449 "READ_SPARM mbxStatus x%x\n",
450 mb->mbxCommand, mb->mbxStatus);
451 phba->link_state = LPFC_HBA_ERROR;
452 mp = (struct lpfc_dmabuf *)pmb->ctx_buf;
453 mempool_free(pmb, phba->mbox_mem_pool);
454 lpfc_mbuf_free(phba, mp->virt, mp->phys);
459 mp = (struct lpfc_dmabuf *)pmb->ctx_buf;
461 memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
462 lpfc_mbuf_free(phba, mp->virt, mp->phys);
465 lpfc_update_vport_wwn(vport);
467 /* Update the fc_host data structures with new wwn. */
468 fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
469 fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
470 fc_host_max_npiv_vports(shost) = phba->max_vpi;
472 /* If no serial number in VPD data, use low 6 bytes of WWNN */
473 /* This should be consolidated into parse_vpd ? - mr */
474 if (phba->SerialNumber[0] == 0) {
477 outptr = &vport->fc_nodename.u.s.IEEE[0];
478 for (i = 0; i < 12; i++) {
480 j = ((status & 0xf0) >> 4);
482 phba->SerialNumber[i] =
483 (char)((uint8_t) 0x30 + (uint8_t) j);
485 phba->SerialNumber[i] =
486 (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
490 phba->SerialNumber[i] =
491 (char)((uint8_t) 0x30 + (uint8_t) j);
493 phba->SerialNumber[i] =
494 (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
498 lpfc_read_config(phba, pmb);
500 if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
501 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
502 "0453 Adapter failed to init, mbxCmd x%x "
503 "READ_CONFIG, mbxStatus x%x\n",
504 mb->mbxCommand, mb->mbxStatus);
505 phba->link_state = LPFC_HBA_ERROR;
506 mempool_free( pmb, phba->mbox_mem_pool);
510 /* Check if the port is disabled */
511 lpfc_sli_read_link_ste(phba);
513 /* Reset the DFT_HBA_Q_DEPTH to the max xri */
514 if (phba->cfg_hba_queue_depth > mb->un.varRdConfig.max_xri) {
515 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
516 "3359 HBA queue depth changed from %d to %d\n",
517 phba->cfg_hba_queue_depth,
518 mb->un.varRdConfig.max_xri);
519 phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri;
522 phba->lmt = mb->un.varRdConfig.lmt;
524 /* Get the default values for Model Name and Description */
525 lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
527 phba->link_state = LPFC_LINK_DOWN;
529 /* Only process IOCBs on ELS ring till hba_state is READY */
530 if (psli->sli3_ring[LPFC_EXTRA_RING].sli.sli3.cmdringaddr)
531 psli->sli3_ring[LPFC_EXTRA_RING].flag |= LPFC_STOP_IOCB_EVENT;
532 if (psli->sli3_ring[LPFC_FCP_RING].sli.sli3.cmdringaddr)
533 psli->sli3_ring[LPFC_FCP_RING].flag |= LPFC_STOP_IOCB_EVENT;
535 /* Post receive buffers for desired rings */
536 if (phba->sli_rev != 3)
537 lpfc_post_rcv_buf(phba);
540 * Configure HBA MSI-X attention conditions to messages if MSI-X mode
542 if (phba->intr_type == MSIX) {
543 rc = lpfc_config_msi(phba, pmb);
545 mempool_free(pmb, phba->mbox_mem_pool);
548 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
549 if (rc != MBX_SUCCESS) {
550 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
551 "0352 Config MSI mailbox command "
552 "failed, mbxCmd x%x, mbxStatus x%x\n",
553 pmb->u.mb.mbxCommand,
554 pmb->u.mb.mbxStatus);
555 mempool_free(pmb, phba->mbox_mem_pool);
560 spin_lock_irq(&phba->hbalock);
561 /* Initialize ERATT handling flag */
562 phba->hba_flag &= ~HBA_ERATT_HANDLED;
564 /* Enable appropriate host interrupts */
565 if (lpfc_readl(phba->HCregaddr, &status)) {
566 spin_unlock_irq(&phba->hbalock);
569 status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
570 if (psli->num_rings > 0)
571 status |= HC_R0INT_ENA;
572 if (psli->num_rings > 1)
573 status |= HC_R1INT_ENA;
574 if (psli->num_rings > 2)
575 status |= HC_R2INT_ENA;
576 if (psli->num_rings > 3)
577 status |= HC_R3INT_ENA;
579 if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
580 (phba->cfg_poll & DISABLE_FCP_RING_INT))
581 status &= ~(HC_R0INT_ENA);
583 writel(status, phba->HCregaddr);
584 readl(phba->HCregaddr); /* flush */
585 spin_unlock_irq(&phba->hbalock);
587 /* Set up ring-0 (ELS) timer */
588 timeout = phba->fc_ratov * 2;
589 mod_timer(&vport->els_tmofunc,
590 jiffies + msecs_to_jiffies(1000 * timeout));
591 /* Set up heart beat (HB) timer */
592 mod_timer(&phba->hb_tmofunc,
593 jiffies + msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
594 phba->hb_outstanding = 0;
595 phba->last_completion_time = jiffies;
596 /* Set up error attention (ERATT) polling timer */
597 mod_timer(&phba->eratt_poll,
598 jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
600 if (phba->hba_flag & LINK_DISABLED) {
601 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
602 "2598 Adapter Link is disabled.\n");
603 lpfc_down_link(phba, pmb);
604 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
605 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
606 if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
607 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
608 "2599 Adapter failed to issue DOWN_LINK"
609 " mbox command rc 0x%x\n", rc);
611 mempool_free(pmb, phba->mbox_mem_pool);
614 } else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
615 mempool_free(pmb, phba->mbox_mem_pool);
616 rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
620 /* MBOX buffer will be freed in mbox compl */
621 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
623 phba->link_state = LPFC_HBA_ERROR;
627 lpfc_config_async(phba, pmb, LPFC_ELS_RING);
628 pmb->mbox_cmpl = lpfc_config_async_cmpl;
629 pmb->vport = phba->pport;
630 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
632 if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
633 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
634 "0456 Adapter failed to issue "
635 "ASYNCEVT_ENABLE mbox status x%x\n",
637 mempool_free(pmb, phba->mbox_mem_pool);
640 /* Get Option rom version */
641 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
643 phba->link_state = LPFC_HBA_ERROR;
647 lpfc_dump_wakeup_param(phba, pmb);
648 pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
649 pmb->vport = phba->pport;
650 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
652 if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
653 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
654 "0435 Adapter failed "
655 "to get Option ROM version status x%x\n", rc);
656 mempool_free(pmb, phba->mbox_mem_pool);
663 * lpfc_hba_init_link - Initialize the FC link
664 * @phba: pointer to lpfc hba data structure.
665 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
667 * This routine will issue the INIT_LINK mailbox command call.
668 * It is available to other drivers through the lpfc_hba data
669 * structure for use as a delayed link up mechanism with the
670 * module parameter lpfc_suppress_link_up.
674 * Any other value - error
677 lpfc_hba_init_link(struct lpfc_hba *phba, uint32_t flag)
679 return lpfc_hba_init_link_fc_topology(phba, phba->cfg_topology, flag);
683 * lpfc_hba_init_link_fc_topology - Initialize FC link with desired topology
684 * @phba: pointer to lpfc hba data structure.
685 * @fc_topology: desired fc topology.
686 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
688 * This routine will issue the INIT_LINK mailbox command call.
689 * It is available to other drivers through the lpfc_hba data
690 * structure for use as a delayed link up mechanism with the
691 * module parameter lpfc_suppress_link_up.
695 * Any other value - error
698 lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
701 struct lpfc_vport *vport = phba->pport;
706 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
708 phba->link_state = LPFC_HBA_ERROR;
714 if ((phba->cfg_link_speed > LPFC_USER_LINK_SPEED_MAX) ||
715 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_1G) &&
716 !(phba->lmt & LMT_1Gb)) ||
717 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_2G) &&
718 !(phba->lmt & LMT_2Gb)) ||
719 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_4G) &&
720 !(phba->lmt & LMT_4Gb)) ||
721 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_8G) &&
722 !(phba->lmt & LMT_8Gb)) ||
723 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G) &&
724 !(phba->lmt & LMT_10Gb)) ||
725 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) &&
726 !(phba->lmt & LMT_16Gb)) ||
727 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) &&
728 !(phba->lmt & LMT_32Gb)) ||
729 ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_64G) &&
730 !(phba->lmt & LMT_64Gb))) {
731 /* Reset link speed to auto */
732 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
733 "1302 Invalid speed for this board:%d "
734 "Reset link speed to auto.\n",
735 phba->cfg_link_speed);
736 phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
738 lpfc_init_link(phba, pmb, fc_topology, phba->cfg_link_speed);
739 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
740 if (phba->sli_rev < LPFC_SLI_REV4)
741 lpfc_set_loopback_flag(phba);
742 rc = lpfc_sli_issue_mbox(phba, pmb, flag);
743 if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
744 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
745 "0498 Adapter failed to init, mbxCmd x%x "
746 "INIT_LINK, mbxStatus x%x\n",
747 mb->mbxCommand, mb->mbxStatus);
748 if (phba->sli_rev <= LPFC_SLI_REV3) {
749 /* Clear all interrupt enable conditions */
750 writel(0, phba->HCregaddr);
751 readl(phba->HCregaddr); /* flush */
752 /* Clear all pending interrupts */
753 writel(0xffffffff, phba->HAregaddr);
754 readl(phba->HAregaddr); /* flush */
756 phba->link_state = LPFC_HBA_ERROR;
757 if (rc != MBX_BUSY || flag == MBX_POLL)
758 mempool_free(pmb, phba->mbox_mem_pool);
761 phba->cfg_suppress_link_up = LPFC_INITIALIZE_LINK;
762 if (flag == MBX_POLL)
763 mempool_free(pmb, phba->mbox_mem_pool);
769 * lpfc_hba_down_link - this routine downs the FC link
770 * @phba: pointer to lpfc hba data structure.
771 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
773 * This routine will issue the DOWN_LINK mailbox command call.
774 * It is available to other drivers through the lpfc_hba data
775 * structure for use to stop the link.
779 * Any other value - error
782 lpfc_hba_down_link(struct lpfc_hba *phba, uint32_t flag)
787 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
789 phba->link_state = LPFC_HBA_ERROR;
793 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
794 "0491 Adapter Link is disabled.\n");
795 lpfc_down_link(phba, pmb);
796 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
797 rc = lpfc_sli_issue_mbox(phba, pmb, flag);
798 if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
799 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
800 "2522 Adapter failed to issue DOWN_LINK"
801 " mbox command rc 0x%x\n", rc);
803 mempool_free(pmb, phba->mbox_mem_pool);
806 if (flag == MBX_POLL)
807 mempool_free(pmb, phba->mbox_mem_pool);
813 * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
814 * @phba: pointer to lpfc HBA data structure.
816 * This routine will do LPFC uninitialization before the HBA is reset when
817 * bringing down the SLI Layer.
821 * Any other value - error.
824 lpfc_hba_down_prep(struct lpfc_hba *phba)
826 struct lpfc_vport **vports;
829 if (phba->sli_rev <= LPFC_SLI_REV3) {
830 /* Disable interrupts */
831 writel(0, phba->HCregaddr);
832 readl(phba->HCregaddr); /* flush */
835 if (phba->pport->load_flag & FC_UNLOADING)
836 lpfc_cleanup_discovery_resources(phba->pport);
838 vports = lpfc_create_vport_work_array(phba);
840 for (i = 0; i <= phba->max_vports &&
841 vports[i] != NULL; i++)
842 lpfc_cleanup_discovery_resources(vports[i]);
843 lpfc_destroy_vport_work_array(phba, vports);
849 * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free
850 * rspiocb which got deferred
852 * @phba: pointer to lpfc HBA data structure.
854 * This routine will cleanup completed slow path events after HBA is reset
855 * when bringing down the SLI Layer.
862 lpfc_sli4_free_sp_events(struct lpfc_hba *phba)
864 struct lpfc_iocbq *rspiocbq;
865 struct hbq_dmabuf *dmabuf;
866 struct lpfc_cq_event *cq_event;
868 spin_lock_irq(&phba->hbalock);
869 phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
870 spin_unlock_irq(&phba->hbalock);
872 while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
873 /* Get the response iocb from the head of work queue */
874 spin_lock_irq(&phba->hbalock);
875 list_remove_head(&phba->sli4_hba.sp_queue_event,
876 cq_event, struct lpfc_cq_event, list);
877 spin_unlock_irq(&phba->hbalock);
879 switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
880 case CQE_CODE_COMPL_WQE:
881 rspiocbq = container_of(cq_event, struct lpfc_iocbq,
883 lpfc_sli_release_iocbq(phba, rspiocbq);
885 case CQE_CODE_RECEIVE:
886 case CQE_CODE_RECEIVE_V1:
887 dmabuf = container_of(cq_event, struct hbq_dmabuf,
889 lpfc_in_buf_free(phba, &dmabuf->dbuf);
895 * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset
896 * @phba: pointer to lpfc HBA data structure.
898 * This routine will cleanup posted ELS buffers after the HBA is reset
899 * when bringing down the SLI Layer.
906 lpfc_hba_free_post_buf(struct lpfc_hba *phba)
908 struct lpfc_sli *psli = &phba->sli;
909 struct lpfc_sli_ring *pring;
910 struct lpfc_dmabuf *mp, *next_mp;
914 if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
915 lpfc_sli_hbqbuf_free_all(phba);
917 /* Cleanup preposted buffers on the ELS ring */
918 pring = &psli->sli3_ring[LPFC_ELS_RING];
919 spin_lock_irq(&phba->hbalock);
920 list_splice_init(&pring->postbufq, &buflist);
921 spin_unlock_irq(&phba->hbalock);
924 list_for_each_entry_safe(mp, next_mp, &buflist, list) {
927 lpfc_mbuf_free(phba, mp->virt, mp->phys);
931 spin_lock_irq(&phba->hbalock);
932 pring->postbufq_cnt -= count;
933 spin_unlock_irq(&phba->hbalock);
938 * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset
939 * @phba: pointer to lpfc HBA data structure.
941 * This routine will cleanup the txcmplq after the HBA is reset when bringing
942 * down the SLI Layer.
948 lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
950 struct lpfc_sli *psli = &phba->sli;
951 struct lpfc_queue *qp = NULL;
952 struct lpfc_sli_ring *pring;
953 LIST_HEAD(completions);
955 struct lpfc_iocbq *piocb, *next_iocb;
957 if (phba->sli_rev != LPFC_SLI_REV4) {
958 for (i = 0; i < psli->num_rings; i++) {
959 pring = &psli->sli3_ring[i];
960 spin_lock_irq(&phba->hbalock);
961 /* At this point in time the HBA is either reset or DOA
962 * Nothing should be on txcmplq as it will
965 list_splice_init(&pring->txcmplq, &completions);
966 pring->txcmplq_cnt = 0;
967 spin_unlock_irq(&phba->hbalock);
969 lpfc_sli_abort_iocb_ring(phba, pring);
971 /* Cancel all the IOCBs from the completions list */
972 lpfc_sli_cancel_iocbs(phba, &completions,
973 IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED);
976 list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
980 spin_lock_irq(&pring->ring_lock);
981 list_for_each_entry_safe(piocb, next_iocb,
982 &pring->txcmplq, list)
983 piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
984 list_splice_init(&pring->txcmplq, &completions);
985 pring->txcmplq_cnt = 0;
986 spin_unlock_irq(&pring->ring_lock);
987 lpfc_sli_abort_iocb_ring(phba, pring);
989 /* Cancel all the IOCBs from the completions list */
990 lpfc_sli_cancel_iocbs(phba, &completions,
991 IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED);
995 * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
996 * @phba: pointer to lpfc HBA data structure.
998 * This routine will do uninitialization after the HBA is reset when bring
999 * down the SLI Layer.
1003 * Any other value - error.
1006 lpfc_hba_down_post_s3(struct lpfc_hba *phba)
1008 lpfc_hba_free_post_buf(phba);
1009 lpfc_hba_clean_txcmplq(phba);
1014 * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
1015 * @phba: pointer to lpfc HBA data structure.
1017 * This routine will do uninitialization after the HBA is reset when bring
1018 * down the SLI Layer.
1022 * Any other value - error.
1025 lpfc_hba_down_post_s4(struct lpfc_hba *phba)
1027 struct lpfc_io_buf *psb, *psb_next;
1028 struct lpfc_async_xchg_ctx *ctxp, *ctxp_next;
1029 struct lpfc_sli4_hdw_queue *qp;
1031 LIST_HEAD(nvme_aborts);
1032 LIST_HEAD(nvmet_aborts);
1033 struct lpfc_sglq *sglq_entry = NULL;
1037 lpfc_sli_hbqbuf_free_all(phba);
1038 lpfc_hba_clean_txcmplq(phba);
1040 /* At this point in time the HBA is either reset or DOA. Either
1041 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
1042 * on the lpfc_els_sgl_list so that it can either be freed if the
1043 * driver is unloading or reposted if the driver is restarting
1046 spin_lock_irq(&phba->hbalock); /* required for lpfc_els_sgl_list and */
1048 /* sgl_list_lock required because worker thread uses this
1051 spin_lock(&phba->sli4_hba.sgl_list_lock);
1052 list_for_each_entry(sglq_entry,
1053 &phba->sli4_hba.lpfc_abts_els_sgl_list, list)
1054 sglq_entry->state = SGL_FREED;
1056 list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
1057 &phba->sli4_hba.lpfc_els_sgl_list);
1060 spin_unlock(&phba->sli4_hba.sgl_list_lock);
1062 /* abts_xxxx_buf_list_lock required because worker thread uses this
1066 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
1067 qp = &phba->sli4_hba.hdwq[idx];
1069 spin_lock(&qp->abts_io_buf_list_lock);
1070 list_splice_init(&qp->lpfc_abts_io_buf_list,
1073 list_for_each_entry_safe(psb, psb_next, &aborts, list) {
1075 psb->status = IOSTAT_SUCCESS;
1078 spin_lock(&qp->io_buf_list_put_lock);
1079 list_splice_init(&aborts, &qp->lpfc_io_buf_list_put);
1080 qp->put_io_bufs += qp->abts_scsi_io_bufs;
1081 qp->put_io_bufs += qp->abts_nvme_io_bufs;
1082 qp->abts_scsi_io_bufs = 0;
1083 qp->abts_nvme_io_bufs = 0;
1084 spin_unlock(&qp->io_buf_list_put_lock);
1085 spin_unlock(&qp->abts_io_buf_list_lock);
1087 spin_unlock_irq(&phba->hbalock);
1089 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
1090 spin_lock_irq(&phba->sli4_hba.abts_nvmet_buf_list_lock);
1091 list_splice_init(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
1093 spin_unlock_irq(&phba->sli4_hba.abts_nvmet_buf_list_lock);
1094 list_for_each_entry_safe(ctxp, ctxp_next, &nvmet_aborts, list) {
1095 ctxp->flag &= ~(LPFC_NVME_XBUSY | LPFC_NVME_ABORT_OP);
1096 lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
1100 lpfc_sli4_free_sp_events(phba);
1105 * lpfc_hba_down_post - Wrapper func for hba down post routine
1106 * @phba: pointer to lpfc HBA data structure.
1108 * This routine wraps the actual SLI3 or SLI4 routine for performing
1109 * uninitialization after the HBA is reset when bring down the SLI Layer.
1113 * Any other value - error.
1116 lpfc_hba_down_post(struct lpfc_hba *phba)
1118 return (*phba->lpfc_hba_down_post)(phba);
1122 * lpfc_hb_timeout - The HBA-timer timeout handler
1123 * @t: timer context used to obtain the pointer to lpfc hba data structure.
1125 * This is the HBA-timer timeout handler registered to the lpfc driver. When
1126 * this timer fires, a HBA timeout event shall be posted to the lpfc driver
1127 * work-port-events bitmap and the worker thread is notified. This timeout
1128 * event will be used by the worker thread to invoke the actual timeout
1129 * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
1130 * be performed in the timeout handler and the HBA timeout event bit shall
1131 * be cleared by the worker thread after it has taken the event bitmap out.
1134 lpfc_hb_timeout(struct timer_list *t)
1136 struct lpfc_hba *phba;
1137 uint32_t tmo_posted;
1138 unsigned long iflag;
1140 phba = from_timer(phba, t, hb_tmofunc);
1142 /* Check for heart beat timeout conditions */
1143 spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
1144 tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
1146 phba->pport->work_port_events |= WORKER_HB_TMO;
1147 spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
1149 /* Tell the worker thread there is work to do */
1151 lpfc_worker_wake_up(phba);
1156 * lpfc_rrq_timeout - The RRQ-timer timeout handler
1157 * @t: timer context used to obtain the pointer to lpfc hba data structure.
1159 * This is the RRQ-timer timeout handler registered to the lpfc driver. When
1160 * this timer fires, a RRQ timeout event shall be posted to the lpfc driver
1161 * work-port-events bitmap and the worker thread is notified. This timeout
1162 * event will be used by the worker thread to invoke the actual timeout
1163 * handler routine, lpfc_rrq_handler. Any periodical operations will
1164 * be performed in the timeout handler and the RRQ timeout event bit shall
1165 * be cleared by the worker thread after it has taken the event bitmap out.
1168 lpfc_rrq_timeout(struct timer_list *t)
1170 struct lpfc_hba *phba;
1171 unsigned long iflag;
1173 phba = from_timer(phba, t, rrq_tmr);
1174 spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
1175 if (!(phba->pport->load_flag & FC_UNLOADING))
1176 phba->hba_flag |= HBA_RRQ_ACTIVE;
1178 phba->hba_flag &= ~HBA_RRQ_ACTIVE;
1179 spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
1181 if (!(phba->pport->load_flag & FC_UNLOADING))
1182 lpfc_worker_wake_up(phba);
1186 * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
1187 * @phba: pointer to lpfc hba data structure.
1188 * @pmboxq: pointer to the driver internal queue element for mailbox command.
1190 * This is the callback function to the lpfc heart-beat mailbox command.
1191 * If configured, the lpfc driver issues the heart-beat mailbox command to
1192 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
1193 * heart-beat mailbox command is issued, the driver shall set up heart-beat
1194 * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
1195 * heart-beat outstanding state. Once the mailbox command comes back and
1196 * no error conditions detected, the heart-beat mailbox command timer is
1197 * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
1198 * state is cleared for the next heart-beat. If the timer expired with the
1199 * heart-beat outstanding state set, the driver will put the HBA offline.
1202 lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
1204 unsigned long drvr_flag;
1206 spin_lock_irqsave(&phba->hbalock, drvr_flag);
1207 phba->hb_outstanding = 0;
1208 spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
1210 /* Check and reset heart-beat timer is necessary */
1211 mempool_free(pmboxq, phba->mbox_mem_pool);
1212 if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
1213 !(phba->link_state == LPFC_HBA_ERROR) &&
1214 !(phba->pport->load_flag & FC_UNLOADING))
1215 mod_timer(&phba->hb_tmofunc,
1217 msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
1222 * lpfc_idle_stat_delay_work - idle_stat tracking
1224 * This routine tracks per-cq idle_stat and determines polling decisions.
1230 lpfc_idle_stat_delay_work(struct work_struct *work)
1232 struct lpfc_hba *phba = container_of(to_delayed_work(work),
1234 idle_stat_delay_work);
1235 struct lpfc_queue *cq;
1236 struct lpfc_sli4_hdw_queue *hdwq;
1237 struct lpfc_idle_stat *idle_stat;
1238 u32 i, idle_percent;
1239 u64 wall, wall_idle, diff_wall, diff_idle, busy_time;
1241 if (phba->pport->load_flag & FC_UNLOADING)
1244 if (phba->link_state == LPFC_HBA_ERROR ||
1245 phba->pport->fc_flag & FC_OFFLINE_MODE)
1248 for_each_present_cpu(i) {
1249 hdwq = &phba->sli4_hba.hdwq[phba->sli4_hba.cpu_map[i].hdwq];
1252 /* Skip if we've already handled this cq's primary CPU */
1256 idle_stat = &phba->sli4_hba.idle_stat[i];
1258 /* get_cpu_idle_time returns values as running counters. Thus,
1259 * to know the amount for this period, the prior counter values
1260 * need to be subtracted from the current counter values.
1261 * From there, the idle time stat can be calculated as a
1262 * percentage of 100 - the sum of the other consumption times.
1264 wall_idle = get_cpu_idle_time(i, &wall, 1);
1265 diff_idle = wall_idle - idle_stat->prev_idle;
1266 diff_wall = wall - idle_stat->prev_wall;
1268 if (diff_wall <= diff_idle)
1271 busy_time = diff_wall - diff_idle;
1273 idle_percent = div64_u64(100 * busy_time, diff_wall);
1274 idle_percent = 100 - idle_percent;
1276 if (idle_percent < 15)
1277 cq->poll_mode = LPFC_QUEUE_WORK;
1279 cq->poll_mode = LPFC_IRQ_POLL;
1281 idle_stat->prev_idle = wall_idle;
1282 idle_stat->prev_wall = wall;
1286 schedule_delayed_work(&phba->idle_stat_delay_work,
1287 msecs_to_jiffies(LPFC_IDLE_STAT_DELAY));
1291 lpfc_hb_eq_delay_work(struct work_struct *work)
1293 struct lpfc_hba *phba = container_of(to_delayed_work(work),
1294 struct lpfc_hba, eq_delay_work);
1295 struct lpfc_eq_intr_info *eqi, *eqi_new;
1296 struct lpfc_queue *eq, *eq_next;
1297 unsigned char *ena_delay = NULL;
1301 if (!phba->cfg_auto_imax || phba->pport->load_flag & FC_UNLOADING)
1304 if (phba->link_state == LPFC_HBA_ERROR ||
1305 phba->pport->fc_flag & FC_OFFLINE_MODE)
1308 ena_delay = kcalloc(phba->sli4_hba.num_possible_cpu, sizeof(*ena_delay),
1313 for (i = 0; i < phba->cfg_irq_chann; i++) {
1314 /* Get the EQ corresponding to the IRQ vector */
1315 eq = phba->sli4_hba.hba_eq_hdl[i].eq;
1318 if (eq->q_mode || eq->q_flag & HBA_EQ_DELAY_CHK) {
1319 eq->q_flag &= ~HBA_EQ_DELAY_CHK;
1320 ena_delay[eq->last_cpu] = 1;
1324 for_each_present_cpu(i) {
1325 eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i);
1327 usdelay = (eqi->icnt >> 10) * LPFC_EQ_DELAY_STEP;
1328 if (usdelay > LPFC_MAX_AUTO_EQ_DELAY)
1329 usdelay = LPFC_MAX_AUTO_EQ_DELAY;
1336 list_for_each_entry_safe(eq, eq_next, &eqi->list, cpu_list) {
1337 if (unlikely(eq->last_cpu != i)) {
1338 eqi_new = per_cpu_ptr(phba->sli4_hba.eq_info,
1340 list_move_tail(&eq->cpu_list, &eqi_new->list);
1343 if (usdelay != eq->q_mode)
1344 lpfc_modify_hba_eq_delay(phba, eq->hdwq, 1,
1352 queue_delayed_work(phba->wq, &phba->eq_delay_work,
1353 msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));
1357 * lpfc_hb_mxp_handler - Multi-XRI pools handler to adjust XRI distribution
1358 * @phba: pointer to lpfc hba data structure.
1360 * For each heartbeat, this routine does some heuristic methods to adjust
1361 * XRI distribution. The goal is to fully utilize free XRIs.
1363 static void lpfc_hb_mxp_handler(struct lpfc_hba *phba)
1368 hwq_count = phba->cfg_hdw_queue;
1369 for (i = 0; i < hwq_count; i++) {
1370 /* Adjust XRIs in private pool */
1371 lpfc_adjust_pvt_pool_count(phba, i);
1373 /* Adjust high watermark */
1374 lpfc_adjust_high_watermark(phba, i);
1376 #ifdef LPFC_MXP_STAT
1377 /* Snapshot pbl, pvt and busy count */
1378 lpfc_snapshot_mxp(phba, i);
1384 * lpfc_hb_timeout_handler - The HBA-timer timeout handler
1385 * @phba: pointer to lpfc hba data structure.
1387 * This is the actual HBA-timer timeout handler to be invoked by the worker
1388 * thread whenever the HBA timer fired and HBA-timeout event posted. This
1389 * handler performs any periodic operations needed for the device. If such
1390 * periodic event has already been attended to either in the interrupt handler
1391 * or by processing slow-ring or fast-ring events within the HBA-timer
1392 * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
1393 * the timer for the next timeout period. If lpfc heart-beat mailbox command
1394 * is configured and there is no heart-beat mailbox command outstanding, a
1395 * heart-beat mailbox is issued and timer set properly. Otherwise, if there
1396 * has been a heart-beat mailbox command outstanding, the HBA shall be put
1400 lpfc_hb_timeout_handler(struct lpfc_hba *phba)
1402 struct lpfc_vport **vports;
1403 LPFC_MBOXQ_t *pmboxq;
1404 struct lpfc_dmabuf *buf_ptr;
1406 struct lpfc_sli *psli = &phba->sli;
1407 LIST_HEAD(completions);
1409 if (phba->cfg_xri_rebalancing) {
1410 /* Multi-XRI pools handler */
1411 lpfc_hb_mxp_handler(phba);
1414 vports = lpfc_create_vport_work_array(phba);
1416 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
1417 lpfc_rcv_seq_check_edtov(vports[i]);
1418 lpfc_fdmi_change_check(vports[i]);
1420 lpfc_destroy_vport_work_array(phba, vports);
1422 if ((phba->link_state == LPFC_HBA_ERROR) ||
1423 (phba->pport->load_flag & FC_UNLOADING) ||
1424 (phba->pport->fc_flag & FC_OFFLINE_MODE))
1427 spin_lock_irq(&phba->pport->work_port_lock);
1429 if (time_after(phba->last_completion_time +
1430 msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL),
1432 spin_unlock_irq(&phba->pport->work_port_lock);
1433 if (!phba->hb_outstanding)
1434 mod_timer(&phba->hb_tmofunc,
1436 msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
1438 mod_timer(&phba->hb_tmofunc,
1440 msecs_to_jiffies(1000 * LPFC_HB_MBOX_TIMEOUT));
1443 spin_unlock_irq(&phba->pport->work_port_lock);
1445 if (phba->elsbuf_cnt &&
1446 (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
1447 spin_lock_irq(&phba->hbalock);
1448 list_splice_init(&phba->elsbuf, &completions);
1449 phba->elsbuf_cnt = 0;
1450 phba->elsbuf_prev_cnt = 0;
1451 spin_unlock_irq(&phba->hbalock);
1453 while (!list_empty(&completions)) {
1454 list_remove_head(&completions, buf_ptr,
1455 struct lpfc_dmabuf, list);
1456 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
1460 phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
1462 /* If there is no heart beat outstanding, issue a heartbeat command */
1463 if (phba->cfg_enable_hba_heartbeat) {
1464 if (!phba->hb_outstanding) {
1465 if ((!(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) &&
1466 (list_empty(&psli->mboxq))) {
1467 pmboxq = mempool_alloc(phba->mbox_mem_pool,
1470 mod_timer(&phba->hb_tmofunc,
1472 msecs_to_jiffies(1000 *
1473 LPFC_HB_MBOX_INTERVAL));
1477 lpfc_heart_beat(phba, pmboxq);
1478 pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
1479 pmboxq->vport = phba->pport;
1480 retval = lpfc_sli_issue_mbox(phba, pmboxq,
1483 if (retval != MBX_BUSY &&
1484 retval != MBX_SUCCESS) {
1485 mempool_free(pmboxq,
1486 phba->mbox_mem_pool);
1487 mod_timer(&phba->hb_tmofunc,
1489 msecs_to_jiffies(1000 *
1490 LPFC_HB_MBOX_INTERVAL));
1493 phba->skipped_hb = 0;
1494 phba->hb_outstanding = 1;
1495 } else if (time_before_eq(phba->last_completion_time,
1496 phba->skipped_hb)) {
1497 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
1498 "2857 Last completion time not "
1499 " updated in %d ms\n",
1500 jiffies_to_msecs(jiffies
1501 - phba->last_completion_time));
1503 phba->skipped_hb = jiffies;
1505 mod_timer(&phba->hb_tmofunc,
1507 msecs_to_jiffies(1000 * LPFC_HB_MBOX_TIMEOUT));
1511 * If heart beat timeout called with hb_outstanding set
1512 * we need to give the hb mailbox cmd a chance to
1515 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
1516 "0459 Adapter heartbeat still out"
1517 "standing:last compl time was %d ms.\n",
1518 jiffies_to_msecs(jiffies
1519 - phba->last_completion_time));
1520 mod_timer(&phba->hb_tmofunc,
1522 msecs_to_jiffies(1000 * LPFC_HB_MBOX_TIMEOUT));
1525 mod_timer(&phba->hb_tmofunc,
1527 msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
1532 * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
1533 * @phba: pointer to lpfc hba data structure.
1535 * This routine is called to bring the HBA offline when HBA hardware error
1536 * other than Port Error 6 has been detected.
1539 lpfc_offline_eratt(struct lpfc_hba *phba)
1541 struct lpfc_sli *psli = &phba->sli;
1543 spin_lock_irq(&phba->hbalock);
1544 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
1545 spin_unlock_irq(&phba->hbalock);
1546 lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
1549 lpfc_reset_barrier(phba);
1550 spin_lock_irq(&phba->hbalock);
1551 lpfc_sli_brdreset(phba);
1552 spin_unlock_irq(&phba->hbalock);
1553 lpfc_hba_down_post(phba);
1554 lpfc_sli_brdready(phba, HS_MBRDY);
1555 lpfc_unblock_mgmt_io(phba);
1556 phba->link_state = LPFC_HBA_ERROR;
1561 * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
1562 * @phba: pointer to lpfc hba data structure.
1564 * This routine is called to bring a SLI4 HBA offline when HBA hardware error
1565 * other than Port Error 6 has been detected.
1568 lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
1570 spin_lock_irq(&phba->hbalock);
1571 phba->link_state = LPFC_HBA_ERROR;
1572 spin_unlock_irq(&phba->hbalock);
1574 lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
1575 lpfc_sli_flush_io_rings(phba);
1577 lpfc_hba_down_post(phba);
1578 lpfc_unblock_mgmt_io(phba);
1582 * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
1583 * @phba: pointer to lpfc hba data structure.
1585 * This routine is invoked to handle the deferred HBA hardware error
1586 * conditions. This type of error is indicated by HBA by setting ER1
1587 * and another ER bit in the host status register. The driver will
1588 * wait until the ER1 bit clears before handling the error condition.
1591 lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
1593 uint32_t old_host_status = phba->work_hs;
1594 struct lpfc_sli *psli = &phba->sli;
1596 /* If the pci channel is offline, ignore possible errors,
1597 * since we cannot communicate with the pci card anyway.
1599 if (pci_channel_offline(phba->pcidev)) {
1600 spin_lock_irq(&phba->hbalock);
1601 phba->hba_flag &= ~DEFER_ERATT;
1602 spin_unlock_irq(&phba->hbalock);
1606 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1607 "0479 Deferred Adapter Hardware Error "
1608 "Data: x%x x%x x%x\n",
1609 phba->work_hs, phba->work_status[0],
1610 phba->work_status[1]);
1612 spin_lock_irq(&phba->hbalock);
1613 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
1614 spin_unlock_irq(&phba->hbalock);
1618 * Firmware stops when it triggred erratt. That could cause the I/Os
1619 * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
1620 * SCSI layer retry it after re-establishing link.
1622 lpfc_sli_abort_fcp_rings(phba);
1625 * There was a firmware error. Take the hba offline and then
1626 * attempt to restart it.
1628 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
1631 /* Wait for the ER1 bit to clear.*/
1632 while (phba->work_hs & HS_FFER1) {
1634 if (lpfc_readl(phba->HSregaddr, &phba->work_hs)) {
1635 phba->work_hs = UNPLUG_ERR ;
1638 /* If driver is unloading let the worker thread continue */
1639 if (phba->pport->load_flag & FC_UNLOADING) {
1646 * This is to ptrotect against a race condition in which
1647 * first write to the host attention register clear the
1648 * host status register.
1650 if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
1651 phba->work_hs = old_host_status & ~HS_FFER1;
1653 spin_lock_irq(&phba->hbalock);
1654 phba->hba_flag &= ~DEFER_ERATT;
1655 spin_unlock_irq(&phba->hbalock);
1656 phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
1657 phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
1661 lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
1663 struct lpfc_board_event_header board_event;
1664 struct Scsi_Host *shost;
1666 board_event.event_type = FC_REG_BOARD_EVENT;
1667 board_event.subcategory = LPFC_EVENT_PORTINTERR;
1668 shost = lpfc_shost_from_vport(phba->pport);
1669 fc_host_post_vendor_event(shost, fc_get_event_number(),
1670 sizeof(board_event),
1671 (char *) &board_event,
1676 * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
1677 * @phba: pointer to lpfc hba data structure.
1679 * This routine is invoked to handle the following HBA hardware error
1681 * 1 - HBA error attention interrupt
1682 * 2 - DMA ring index out of range
1683 * 3 - Mailbox command came back as unknown
1686 lpfc_handle_eratt_s3(struct lpfc_hba *phba)
1688 struct lpfc_vport *vport = phba->pport;
1689 struct lpfc_sli *psli = &phba->sli;
1690 uint32_t event_data;
1691 unsigned long temperature;
1692 struct temp_event temp_event_data;
1693 struct Scsi_Host *shost;
1695 /* If the pci channel is offline, ignore possible errors,
1696 * since we cannot communicate with the pci card anyway.
1698 if (pci_channel_offline(phba->pcidev)) {
1699 spin_lock_irq(&phba->hbalock);
1700 phba->hba_flag &= ~DEFER_ERATT;
1701 spin_unlock_irq(&phba->hbalock);
1705 /* If resets are disabled then leave the HBA alone and return */
1706 if (!phba->cfg_enable_hba_reset)
1709 /* Send an internal error event to mgmt application */
1710 lpfc_board_errevt_to_mgmt(phba);
1712 if (phba->hba_flag & DEFER_ERATT)
1713 lpfc_handle_deferred_eratt(phba);
1715 if ((phba->work_hs & HS_FFER6) || (phba->work_hs & HS_FFER8)) {
1716 if (phba->work_hs & HS_FFER6)
1717 /* Re-establishing Link */
1718 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
1719 "1301 Re-establishing Link "
1720 "Data: x%x x%x x%x\n",
1721 phba->work_hs, phba->work_status[0],
1722 phba->work_status[1]);
1723 if (phba->work_hs & HS_FFER8)
1724 /* Device Zeroization */
1725 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
1726 "2861 Host Authentication device "
1727 "zeroization Data:x%x x%x x%x\n",
1728 phba->work_hs, phba->work_status[0],
1729 phba->work_status[1]);
1731 spin_lock_irq(&phba->hbalock);
1732 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
1733 spin_unlock_irq(&phba->hbalock);
1736 * Firmware stops when it triggled erratt with HS_FFER6.
1737 * That could cause the I/Os dropped by the firmware.
1738 * Error iocb (I/O) on txcmplq and let the SCSI layer
1739 * retry it after re-establishing link.
1741 lpfc_sli_abort_fcp_rings(phba);
1744 * There was a firmware error. Take the hba offline and then
1745 * attempt to restart it.
1747 lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
1749 lpfc_sli_brdrestart(phba);
1750 if (lpfc_online(phba) == 0) { /* Initialize the HBA */
1751 lpfc_unblock_mgmt_io(phba);
1754 lpfc_unblock_mgmt_io(phba);
1755 } else if (phba->work_hs & HS_CRIT_TEMP) {
1756 temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
1757 temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
1758 temp_event_data.event_code = LPFC_CRIT_TEMP;
1759 temp_event_data.data = (uint32_t)temperature;
1761 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1762 "0406 Adapter maximum temperature exceeded "
1763 "(%ld), taking this port offline "
1764 "Data: x%x x%x x%x\n",
1765 temperature, phba->work_hs,
1766 phba->work_status[0], phba->work_status[1]);
1768 shost = lpfc_shost_from_vport(phba->pport);
1769 fc_host_post_vendor_event(shost, fc_get_event_number(),
1770 sizeof(temp_event_data),
1771 (char *) &temp_event_data,
1772 SCSI_NL_VID_TYPE_PCI
1773 | PCI_VENDOR_ID_EMULEX);
1775 spin_lock_irq(&phba->hbalock);
1776 phba->over_temp_state = HBA_OVER_TEMP;
1777 spin_unlock_irq(&phba->hbalock);
1778 lpfc_offline_eratt(phba);
1781 /* The if clause above forces this code path when the status
1782 * failure is a value other than FFER6. Do not call the offline
1783 * twice. This is the adapter hardware error path.
1785 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1786 "0457 Adapter Hardware Error "
1787 "Data: x%x x%x x%x\n",
1789 phba->work_status[0], phba->work_status[1]);
1791 event_data = FC_REG_DUMP_EVENT;
1792 shost = lpfc_shost_from_vport(vport);
1793 fc_host_post_vendor_event(shost, fc_get_event_number(),
1794 sizeof(event_data), (char *) &event_data,
1795 SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
1797 lpfc_offline_eratt(phba);
1803 * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg
1804 * @phba: pointer to lpfc hba data structure.
1805 * @mbx_action: flag for mailbox shutdown action.
1806 * @en_rn_msg: send reset/port recovery message.
1807 * This routine is invoked to perform an SLI4 port PCI function reset in
1808 * response to port status register polling attention. It waits for port
1809 * status register (ERR, RDY, RN) bits before proceeding with function reset.
1810 * During this process, interrupt vectors are freed and later requested
1811 * for handling possible port resource change.
1814 lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
1820 if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
1821 LPFC_SLI_INTF_IF_TYPE_2) {
1823 * On error status condition, driver need to wait for port
1824 * ready before performing reset.
1826 rc = lpfc_sli4_pdev_status_reg_wait(phba);
1831 /* need reset: attempt for port recovery */
1833 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1834 "2887 Reset Needed: Attempting Port "
1836 lpfc_offline_prep(phba, mbx_action);
1837 lpfc_sli_flush_io_rings(phba);
1839 /* release interrupt for possible resource change */
1840 lpfc_sli4_disable_intr(phba);
1841 rc = lpfc_sli_brdrestart(phba);
1843 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1844 "6309 Failed to restart board\n");
1847 /* request and enable interrupt */
1848 intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
1849 if (intr_mode == LPFC_INTR_ERROR) {
1850 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1851 "3175 Failed to enable interrupt\n");
1854 phba->intr_mode = intr_mode;
1855 rc = lpfc_online(phba);
1857 lpfc_unblock_mgmt_io(phba);
1863 * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
1864 * @phba: pointer to lpfc hba data structure.
1866 * This routine is invoked to handle the SLI4 HBA hardware error attention
1870 lpfc_handle_eratt_s4(struct lpfc_hba *phba)
1872 struct lpfc_vport *vport = phba->pport;
1873 uint32_t event_data;
1874 struct Scsi_Host *shost;
1876 struct lpfc_register portstat_reg = {0};
1877 uint32_t reg_err1, reg_err2;
1878 uint32_t uerrlo_reg, uemasklo_reg;
1879 uint32_t smphr_port_status = 0, pci_rd_rc1, pci_rd_rc2;
1880 bool en_rn_msg = true;
1881 struct temp_event temp_event_data;
1882 struct lpfc_register portsmphr_reg;
1885 /* If the pci channel is offline, ignore possible errors, since
1886 * we cannot communicate with the pci card anyway.
1888 if (pci_channel_offline(phba->pcidev)) {
1889 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1890 "3166 pci channel is offline\n");
1891 lpfc_sli4_offline_eratt(phba);
1895 memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
1896 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
1898 case LPFC_SLI_INTF_IF_TYPE_0:
1899 pci_rd_rc1 = lpfc_readl(
1900 phba->sli4_hba.u.if_type0.UERRLOregaddr,
1902 pci_rd_rc2 = lpfc_readl(
1903 phba->sli4_hba.u.if_type0.UEMASKLOregaddr,
1905 /* consider PCI bus read error as pci_channel_offline */
1906 if (pci_rd_rc1 == -EIO && pci_rd_rc2 == -EIO)
1908 if (!(phba->hba_flag & HBA_RECOVERABLE_UE)) {
1909 lpfc_sli4_offline_eratt(phba);
1912 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1913 "7623 Checking UE recoverable");
1915 for (i = 0; i < phba->sli4_hba.ue_to_sr / 1000; i++) {
1916 if (lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
1917 &portsmphr_reg.word0))
1920 smphr_port_status = bf_get(lpfc_port_smphr_port_status,
1922 if ((smphr_port_status & LPFC_PORT_SEM_MASK) ==
1923 LPFC_PORT_SEM_UE_RECOVERABLE)
1925 /*Sleep for 1Sec, before checking SEMAPHORE */
1929 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1930 "4827 smphr_port_status x%x : Waited %dSec",
1931 smphr_port_status, i);
1933 /* Recoverable UE, reset the HBA device */
1934 if ((smphr_port_status & LPFC_PORT_SEM_MASK) ==
1935 LPFC_PORT_SEM_UE_RECOVERABLE) {
1936 for (i = 0; i < 20; i++) {
1938 if (!lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
1939 &portsmphr_reg.word0) &&
1940 (LPFC_POST_STAGE_PORT_READY ==
1941 bf_get(lpfc_port_smphr_port_status,
1943 rc = lpfc_sli4_port_sta_fn_reset(phba,
1944 LPFC_MBX_NO_WAIT, en_rn_msg);
1947 lpfc_printf_log(phba, KERN_ERR,
1949 "4215 Failed to recover UE");
1954 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1955 "7624 Firmware not ready: Failing UE recovery,"
1956 " waited %dSec", i);
1957 phba->link_state = LPFC_HBA_ERROR;
1960 case LPFC_SLI_INTF_IF_TYPE_2:
1961 case LPFC_SLI_INTF_IF_TYPE_6:
1962 pci_rd_rc1 = lpfc_readl(
1963 phba->sli4_hba.u.if_type2.STATUSregaddr,
1964 &portstat_reg.word0);
1965 /* consider PCI bus read error as pci_channel_offline */
1966 if (pci_rd_rc1 == -EIO) {
1967 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1968 "3151 PCI bus read access failure: x%x\n",
1969 readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
1970 lpfc_sli4_offline_eratt(phba);
1973 reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
1974 reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
1975 if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
1976 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
1977 "2889 Port Overtemperature event, "
1978 "taking port offline Data: x%x x%x\n",
1979 reg_err1, reg_err2);
1981 phba->sfp_alarm |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE;
1982 temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
1983 temp_event_data.event_code = LPFC_CRIT_TEMP;
1984 temp_event_data.data = 0xFFFFFFFF;
1986 shost = lpfc_shost_from_vport(phba->pport);
1987 fc_host_post_vendor_event(shost, fc_get_event_number(),
1988 sizeof(temp_event_data),
1989 (char *)&temp_event_data,
1990 SCSI_NL_VID_TYPE_PCI
1991 | PCI_VENDOR_ID_EMULEX);
1993 spin_lock_irq(&phba->hbalock);
1994 phba->over_temp_state = HBA_OVER_TEMP;
1995 spin_unlock_irq(&phba->hbalock);
1996 lpfc_sli4_offline_eratt(phba);
1999 if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
2000 reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
2001 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
2002 "3143 Port Down: Firmware Update "
2005 } else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
2006 reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
2007 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
2008 "3144 Port Down: Debug Dump\n");
2009 else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
2010 reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON)
2011 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
2012 "3145 Port Down: Provisioning\n");
2014 /* If resets are disabled then leave the HBA alone and return */
2015 if (!phba->cfg_enable_hba_reset)
2018 /* Check port status register for function reset */
2019 rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT,
2022 /* don't report event on forced debug dump */
2023 if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
2024 reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
2029 /* fall through for not able to recover */
2030 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
2031 "3152 Unrecoverable error\n");
2032 phba->link_state = LPFC_HBA_ERROR;
2034 case LPFC_SLI_INTF_IF_TYPE_1:
2038 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
2039 "3123 Report dump event to upper layer\n");
2040 /* Send an internal error event to mgmt application */
2041 lpfc_board_errevt_to_mgmt(phba);
2043 event_data = FC_REG_DUMP_EVENT;
2044 shost = lpfc_shost_from_vport(vport);
2045 fc_host_post_vendor_event(shost, fc_get_event_number(),
2046 sizeof(event_data), (char *) &event_data,
2047 SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
2051 * lpfc_handle_eratt - Wrapper func for handling hba error attention
2052 * @phba: pointer to lpfc HBA data structure.
2054 * This routine wraps the actual SLI3 or SLI4 hba error attention handling
2055 * routine from the API jump table function pointer from the lpfc_hba struct.
2059 * Any other value - error.
2062 lpfc_handle_eratt(struct lpfc_hba *phba)
2064 (*phba->lpfc_handle_eratt)(phba);
2068 * lpfc_handle_latt - The HBA link event handler
2069 * @phba: pointer to lpfc hba data structure.
2071 * This routine is invoked from the worker thread to handle a HBA host
2072 * attention link event. SLI3 only.
2075 lpfc_handle_latt(struct lpfc_hba *phba)
2077 struct lpfc_vport *vport = phba->pport;
2078 struct lpfc_sli *psli = &phba->sli;
2080 volatile uint32_t control;
2081 struct lpfc_dmabuf *mp;
2084 pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
2087 goto lpfc_handle_latt_err_exit;
2090 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
2093 goto lpfc_handle_latt_free_pmb;
2096 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
2099 goto lpfc_handle_latt_free_mp;
2102 /* Cleanup any outstanding ELS commands */
2103 lpfc_els_flush_all_cmd(phba);
2105 psli->slistat.link_event++;
2106 lpfc_read_topology(phba, pmb, mp);
2107 pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
2109 /* Block ELS IOCBs until we have processed this mbox command */
2110 phba->sli.sli3_ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
2111 rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
2112 if (rc == MBX_NOT_FINISHED) {
2114 goto lpfc_handle_latt_free_mbuf;
2117 /* Clear Link Attention in HA REG */
2118 spin_lock_irq(&phba->hbalock);
2119 writel(HA_LATT, phba->HAregaddr);
2120 readl(phba->HAregaddr); /* flush */
2121 spin_unlock_irq(&phba->hbalock);
2125 lpfc_handle_latt_free_mbuf:
2126 phba->sli.sli3_ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
2127 lpfc_mbuf_free(phba, mp->virt, mp->phys);
2128 lpfc_handle_latt_free_mp:
2130 lpfc_handle_latt_free_pmb:
2131 mempool_free(pmb, phba->mbox_mem_pool);
2132 lpfc_handle_latt_err_exit:
2133 /* Enable Link attention interrupts */
2134 spin_lock_irq(&phba->hbalock);
2135 psli->sli_flag |= LPFC_PROCESS_LA;
2136 control = readl(phba->HCregaddr);
2137 control |= HC_LAINT_ENA;
2138 writel(control, phba->HCregaddr);
2139 readl(phba->HCregaddr); /* flush */
2141 /* Clear Link Attention in HA REG */
2142 writel(HA_LATT, phba->HAregaddr);
2143 readl(phba->HAregaddr); /* flush */
2144 spin_unlock_irq(&phba->hbalock);
2145 lpfc_linkdown(phba);
2146 phba->link_state = LPFC_HBA_ERROR;
2148 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
2149 "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);
2155 * lpfc_parse_vpd - Parse VPD (Vital Product Data)
2156 * @phba: pointer to lpfc hba data structure.
2157 * @vpd: pointer to the vital product data.
2158 * @len: length of the vital product data in bytes.
2160 * This routine parses the Vital Product Data (VPD). The VPD is treated as
2161 * an array of characters. In this routine, the ModelName, ProgramType, and
2162 * ModelDesc, etc. fields of the phba data structure will be populated.
2165 * 0 - pointer to the VPD passed in is NULL
2169 lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
2171 uint8_t lenlo, lenhi;
2181 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
2182 "0455 Vital Product Data: x%x x%x x%x x%x\n",
2183 (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
2185 while (!finished && (index < (len - 4))) {
2186 switch (vpd[index]) {
2194 i = ((((unsigned short)lenhi) << 8) + lenlo);
2203 Length = ((((unsigned short)lenhi) << 8) + lenlo);
2204 if (Length > len - index)
2205 Length = len - index;
2206 while (Length > 0) {
2207 /* Look for Serial Number */
2208 if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
2215 phba->SerialNumber[j++] = vpd[index++];
2219 phba->SerialNumber[j] = 0;
2222 else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
2223 phba->vpd_flag |= VPD_MODEL_DESC;
2230 phba->ModelDesc[j++] = vpd[index++];
2234 phba->ModelDesc[j] = 0;
2237 else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
2238 phba->vpd_flag |= VPD_MODEL_NAME;
2245 phba->ModelName[j++] = vpd[index++];
2249 phba->ModelName[j] = 0;
2252 else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
2253 phba->vpd_flag |= VPD_PROGRAM_TYPE;
2260 phba->ProgramType[j++] = vpd[index++];
2264 phba->ProgramType[j] = 0;
2267 else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
2268 phba->vpd_flag |= VPD_PORT;
2275 if ((phba->sli_rev == LPFC_SLI_REV4) &&
2276 (phba->sli4_hba.pport_name_sta ==
2277 LPFC_SLI4_PPNAME_GET)) {
2281 phba->Port[j++] = vpd[index++];
2285 if ((phba->sli_rev != LPFC_SLI_REV4) ||
2286 (phba->sli4_hba.pport_name_sta ==
2287 LPFC_SLI4_PPNAME_NON))
2314 * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
2315 * @phba: pointer to lpfc hba data structure.
2316 * @mdp: pointer to the data structure to hold the derived model name.
2317 * @descp: pointer to the data structure to hold the derived description.
2319 * This routine retrieves HBA's description based on its registered PCI device
2320 * ID. The @descp passed into this function points to an array of 256 chars. It
2321 * shall be returned with the model name, maximum speed, and the host bus type.
2322 * The @mdp passed into this function points to an array of 80 chars. When the
2323 * function returns, the @mdp will be filled with the model name.
2326 lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
2329 uint16_t dev_id = phba->pcidev->device;
2332 int oneConnect = 0; /* default is not a oneConnect */
2337 } m = {"<Unknown>", "", ""};
2339 if (mdp && mdp[0] != '\0'
2340 && descp && descp[0] != '\0')
2343 if (phba->lmt & LMT_64Gb)
2345 else if (phba->lmt & LMT_32Gb)
2347 else if (phba->lmt & LMT_16Gb)
2349 else if (phba->lmt & LMT_10Gb)
2351 else if (phba->lmt & LMT_8Gb)
2353 else if (phba->lmt & LMT_4Gb)
2355 else if (phba->lmt & LMT_2Gb)
2357 else if (phba->lmt & LMT_1Gb)
2365 case PCI_DEVICE_ID_FIREFLY:
2366 m = (typeof(m)){"LP6000", "PCI",
2367 "Obsolete, Unsupported Fibre Channel Adapter"};
2369 case PCI_DEVICE_ID_SUPERFLY:
2370 if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
2371 m = (typeof(m)){"LP7000", "PCI", ""};
2373 m = (typeof(m)){"LP7000E", "PCI", ""};
2374 m.function = "Obsolete, Unsupported Fibre Channel Adapter";
2376 case PCI_DEVICE_ID_DRAGONFLY:
2377 m = (typeof(m)){"LP8000", "PCI",
2378 "Obsolete, Unsupported Fibre Channel Adapter"};
2380 case PCI_DEVICE_ID_CENTAUR:
2381 if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
2382 m = (typeof(m)){"LP9002", "PCI", ""};
2384 m = (typeof(m)){"LP9000", "PCI", ""};
2385 m.function = "Obsolete, Unsupported Fibre Channel Adapter";
2387 case PCI_DEVICE_ID_RFLY:
2388 m = (typeof(m)){"LP952", "PCI",
2389 "Obsolete, Unsupported Fibre Channel Adapter"};
2391 case PCI_DEVICE_ID_PEGASUS:
2392 m = (typeof(m)){"LP9802", "PCI-X",
2393 "Obsolete, Unsupported Fibre Channel Adapter"};
2395 case PCI_DEVICE_ID_THOR:
2396 m = (typeof(m)){"LP10000", "PCI-X",
2397 "Obsolete, Unsupported Fibre Channel Adapter"};
2399 case PCI_DEVICE_ID_VIPER:
2400 m = (typeof(m)){"LPX1000", "PCI-X",
2401 "Obsolete, Unsupported Fibre Channel Adapter"};
2403 case PCI_DEVICE_ID_PFLY:
2404 m = (typeof(m)){"LP982", "PCI-X",
2405 "Obsolete, Unsupported Fibre Channel Adapter"};
2407 case PCI_DEVICE_ID_TFLY:
2408 m = (typeof(m)){"LP1050", "PCI-X",
2409 "Obsolete, Unsupported Fibre Channel Adapter"};
2411 case PCI_DEVICE_ID_HELIOS:
2412 m = (typeof(m)){"LP11000", "PCI-X2",
2413 "Obsolete, Unsupported Fibre Channel Adapter"};
2415 case PCI_DEVICE_ID_HELIOS_SCSP:
2416 m = (typeof(m)){"LP11000-SP", "PCI-X2",
2417 "Obsolete, Unsupported Fibre Channel Adapter"};
2419 case PCI_DEVICE_ID_HELIOS_DCSP:
2420 m = (typeof(m)){"LP11002-SP", "PCI-X2",
2421 "Obsolete, Unsupported Fibre Channel Adapter"};
2423 case PCI_DEVICE_ID_NEPTUNE:
2424 m = (typeof(m)){"LPe1000", "PCIe",
2425 "Obsolete, Unsupported Fibre Channel Adapter"};
2427 case PCI_DEVICE_ID_NEPTUNE_SCSP:
2428 m = (typeof(m)){"LPe1000-SP", "PCIe",
2429 "Obsolete, Unsupported Fibre Channel Adapter"};
2431 case PCI_DEVICE_ID_NEPTUNE_DCSP:
2432 m = (typeof(m)){"LPe1002-SP", "PCIe",
2433 "Obsolete, Unsupported Fibre Channel Adapter"};
2435 case PCI_DEVICE_ID_BMID:
2436 m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
2438 case PCI_DEVICE_ID_BSMB:
2439 m = (typeof(m)){"LP111", "PCI-X2",
2440 "Obsolete, Unsupported Fibre Channel Adapter"};
2442 case PCI_DEVICE_ID_ZEPHYR:
2443 m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
2445 case PCI_DEVICE_ID_ZEPHYR_SCSP:
2446 m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
2448 case PCI_DEVICE_ID_ZEPHYR_DCSP:
2449 m = (typeof(m)){"LP2105", "PCIe", "FCoE Adapter"};
2452 case PCI_DEVICE_ID_ZMID:
2453 m = (typeof(m)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
2455 case PCI_DEVICE_ID_ZSMB:
2456 m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
2458 case PCI_DEVICE_ID_LP101:
2459 m = (typeof(m)){"LP101", "PCI-X",
2460 "Obsolete, Unsupported Fibre Channel Adapter"};
2462 case PCI_DEVICE_ID_LP10000S:
2463 m = (typeof(m)){"LP10000-S", "PCI",
2464 "Obsolete, Unsupported Fibre Channel Adapter"};
2466 case PCI_DEVICE_ID_LP11000S:
2467 m = (typeof(m)){"LP11000-S", "PCI-X2",
2468 "Obsolete, Unsupported Fibre Channel Adapter"};
2470 case PCI_DEVICE_ID_LPE11000S:
2471 m = (typeof(m)){"LPe11000-S", "PCIe",
2472 "Obsolete, Unsupported Fibre Channel Adapter"};
2474 case PCI_DEVICE_ID_SAT:
2475 m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
2477 case PCI_DEVICE_ID_SAT_MID:
2478 m = (typeof(m)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
2480 case PCI_DEVICE_ID_SAT_SMB:
2481 m = (typeof(m)){"LPe121", "PCIe", "Fibre Channel Adapter"};
2483 case PCI_DEVICE_ID_SAT_DCSP:
2484 m = (typeof(m)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
2486 case PCI_DEVICE_ID_SAT_SCSP:
2487 m = (typeof(m)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
2489 case PCI_DEVICE_ID_SAT_S:
2490 m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
2492 case PCI_DEVICE_ID_HORNET:
2493 m = (typeof(m)){"LP21000", "PCIe",
2494 "Obsolete, Unsupported FCoE Adapter"};
2497 case PCI_DEVICE_ID_PROTEUS_VF:
2498 m = (typeof(m)){"LPev12000", "PCIe IOV",
2499 "Obsolete, Unsupported Fibre Channel Adapter"};
2501 case PCI_DEVICE_ID_PROTEUS_PF:
2502 m = (typeof(m)){"LPev12000", "PCIe IOV",
2503 "Obsolete, Unsupported Fibre Channel Adapter"};
2505 case PCI_DEVICE_ID_PROTEUS_S:
2506 m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
2507 "Obsolete, Unsupported Fibre Channel Adapter"};
2509 case PCI_DEVICE_ID_TIGERSHARK:
2511 m = (typeof(m)){"OCe10100", "PCIe", "FCoE"};
2513 case PCI_DEVICE_ID_TOMCAT:
2515 m = (typeof(m)){"OCe11100", "PCIe", "FCoE"};
2517 case PCI_DEVICE_ID_FALCON:
2518 m = (typeof(m)){"LPSe12002-ML1-E", "PCIe",
2519 "EmulexSecure Fibre"};
2521 case PCI_DEVICE_ID_BALIUS:
2522 m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
2523 "Obsolete, Unsupported Fibre Channel Adapter"};
2525 case PCI_DEVICE_ID_LANCER_FC:
2526 m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
2528 case PCI_DEVICE_ID_LANCER_FC_VF:
2529 m = (typeof(m)){"LPe16000", "PCIe",
2530 "Obsolete, Unsupported Fibre Channel Adapter"};
2532 case PCI_DEVICE_ID_LANCER_FCOE:
2534 m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
2536 case PCI_DEVICE_ID_LANCER_FCOE_VF:
2538 m = (typeof(m)){"OCe15100", "PCIe",
2539 "Obsolete, Unsupported FCoE"};
2541 case PCI_DEVICE_ID_LANCER_G6_FC:
2542 m = (typeof(m)){"LPe32000", "PCIe", "Fibre Channel Adapter"};
2544 case PCI_DEVICE_ID_LANCER_G7_FC:
2545 m = (typeof(m)){"LPe36000", "PCIe", "Fibre Channel Adapter"};
2547 case PCI_DEVICE_ID_SKYHAWK:
2548 case PCI_DEVICE_ID_SKYHAWK_VF:
2550 m = (typeof(m)){"OCe14000", "PCIe", "FCoE"};
2553 m = (typeof(m)){"Unknown", "", ""};
2557 if (mdp && mdp[0] == '\0')
2558 snprintf(mdp, 79,"%s", m.name);
2560 * oneConnect hba requires special processing, they are all initiators
2561 * and we put the port number on the end
2563 if (descp && descp[0] == '\0') {
2565 snprintf(descp, 255,
2566 "Emulex OneConnect %s, %s Initiator %s",
2569 else if (max_speed == 0)
2570 snprintf(descp, 255,
2572 m.name, m.bus, m.function);
2574 snprintf(descp, 255,
2575 "Emulex %s %d%s %s %s",
2576 m.name, max_speed, (GE) ? "GE" : "Gb",
2582 * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
2583 * @phba: pointer to lpfc hba data structure.
2584 * @pring: pointer to a IOCB ring.
2585 * @cnt: the number of IOCBs to be posted to the IOCB ring.
2587 * This routine posts a given number of IOCBs with the associated DMA buffer
2588 * descriptors specified by the cnt argument to the given IOCB ring.
2591 * The number of IOCBs NOT able to be posted to the IOCB ring.
2594 lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
2597 struct lpfc_iocbq *iocb;
2598 struct lpfc_dmabuf *mp1, *mp2;
2600 cnt += pring->missbufcnt;
2602 /* While there are buffers to post */
2604 /* Allocate buffer for command iocb */
2605 iocb = lpfc_sli_get_iocbq(phba);
2607 pring->missbufcnt = cnt;
2612 /* 2 buffers can be posted per command */
2613 /* Allocate buffer to post */
2614 mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
2616 mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
2617 if (!mp1 || !mp1->virt) {
2619 lpfc_sli_release_iocbq(phba, iocb);
2620 pring->missbufcnt = cnt;
2624 INIT_LIST_HEAD(&mp1->list);
2625 /* Allocate buffer to post */
2627 mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
2629 mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
2631 if (!mp2 || !mp2->virt) {
2633 lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
2635 lpfc_sli_release_iocbq(phba, iocb);
2636 pring->missbufcnt = cnt;
2640 INIT_LIST_HEAD(&mp2->list);
2645 icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
2646 icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
2647 icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
2648 icmd->ulpBdeCount = 1;
2651 icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
2652 icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
2653 icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
2655 icmd->ulpBdeCount = 2;
2658 icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
2661 if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
2663 lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
2667 lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
2671 lpfc_sli_release_iocbq(phba, iocb);
2672 pring->missbufcnt = cnt;
2675 lpfc_sli_ringpostbuf_put(phba, pring, mp1);
2677 lpfc_sli_ringpostbuf_put(phba, pring, mp2);
2679 pring->missbufcnt = 0;
2684 * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
2685 * @phba: pointer to lpfc hba data structure.
2687 * This routine posts initial receive IOCB buffers to the ELS ring. The
2688 * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
2689 * set to 64 IOCBs. SLI3 only.
2692 * 0 - success (currently always success)
2695 lpfc_post_rcv_buf(struct lpfc_hba *phba)
2697 struct lpfc_sli *psli = &phba->sli;
2699 /* Ring 0, ELS / CT buffers */
2700 lpfc_post_buffer(phba, &psli->sli3_ring[LPFC_ELS_RING], LPFC_BUF_RING0);
2701 /* Ring 2 - FCP no buffers needed */
2706 #define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
2709 * lpfc_sha_init - Set up initial array of hash table entries
2710 * @HashResultPointer: pointer to an array as hash table.
2712 * This routine sets up the initial values to the array of hash table entries
2716 lpfc_sha_init(uint32_t * HashResultPointer)
2718 HashResultPointer[0] = 0x67452301;
2719 HashResultPointer[1] = 0xEFCDAB89;
2720 HashResultPointer[2] = 0x98BADCFE;
2721 HashResultPointer[3] = 0x10325476;
2722 HashResultPointer[4] = 0xC3D2E1F0;
2726 * lpfc_sha_iterate - Iterate initial hash table with the working hash table
2727 * @HashResultPointer: pointer to an initial/result hash table.
2728 * @HashWorkingPointer: pointer to an working hash table.
2730 * This routine iterates an initial hash table pointed by @HashResultPointer
2731 * with the values from the working hash table pointeed by @HashWorkingPointer.
2732 * The results are putting back to the initial hash table, returned through
2733 * the @HashResultPointer as the result hash table.
2736 lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
2740 uint32_t A, B, C, D, E;
2743 HashWorkingPointer[t] =
2745 HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
2747 HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
2748 } while (++t <= 79);
2750 A = HashResultPointer[0];
2751 B = HashResultPointer[1];
2752 C = HashResultPointer[2];
2753 D = HashResultPointer[3];
2754 E = HashResultPointer[4];
2758 TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
2759 } else if (t < 40) {
2760 TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
2761 } else if (t < 60) {
2762 TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
2764 TEMP = (B ^ C ^ D) + 0xCA62C1D6;
2766 TEMP += S(5, A) + E + HashWorkingPointer[t];
2772 } while (++t <= 79);
2774 HashResultPointer[0] += A;
2775 HashResultPointer[1] += B;
2776 HashResultPointer[2] += C;
2777 HashResultPointer[3] += D;
2778 HashResultPointer[4] += E;
2783 * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
2784 * @RandomChallenge: pointer to the entry of host challenge random number array.
2785 * @HashWorking: pointer to the entry of the working hash array.
2787 * This routine calculates the working hash array referred by @HashWorking
2788 * from the challenge random numbers associated with the host, referred by
2789 * @RandomChallenge. The result is put into the entry of the working hash
2790 * array and returned by reference through @HashWorking.
2793 lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
2795 *HashWorking = (*RandomChallenge ^ *HashWorking);
2799 * lpfc_hba_init - Perform special handling for LC HBA initialization
2800 * @phba: pointer to lpfc hba data structure.
2801 * @hbainit: pointer to an array of unsigned 32-bit integers.
2803 * This routine performs the special handling for LC HBA initialization.
2806 lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
2809 uint32_t *HashWorking;
2810 uint32_t *pwwnn = (uint32_t *) phba->wwnn;
2812 HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
2816 HashWorking[0] = HashWorking[78] = *pwwnn++;
2817 HashWorking[1] = HashWorking[79] = *pwwnn;
2819 for (t = 0; t < 7; t++)
2820 lpfc_challenge_key(phba->RandomData + t, HashWorking + t);
2822 lpfc_sha_init(hbainit);
2823 lpfc_sha_iterate(hbainit, HashWorking);
2828 * lpfc_cleanup - Performs vport cleanups before deleting a vport
2829 * @vport: pointer to a virtual N_Port data structure.
2831 * This routine performs the necessary cleanups before deleting the @vport.
2832 * It invokes the discovery state machine to perform necessary state
2833 * transitions and to release the ndlps associated with the @vport. Note,
2834 * the physical port is treated as @vport 0.
2837 lpfc_cleanup(struct lpfc_vport *vport)
2839 struct lpfc_hba *phba = vport->phba;
2840 struct lpfc_nodelist *ndlp, *next_ndlp;
2843 if (phba->link_state > LPFC_LINK_DOWN)
2844 lpfc_port_link_failure(vport);
2846 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
2847 if (!NLP_CHK_NODE_ACT(ndlp)) {
2848 ndlp = lpfc_enable_node(vport, ndlp,
2849 NLP_STE_UNUSED_NODE);
2852 spin_lock_irq(&phba->ndlp_lock);
2853 NLP_SET_FREE_REQ(ndlp);
2854 spin_unlock_irq(&phba->ndlp_lock);
2855 /* Trigger the release of the ndlp memory */
2859 spin_lock_irq(&phba->ndlp_lock);
2860 if (NLP_CHK_FREE_REQ(ndlp)) {
2861 /* The ndlp should not be in memory free mode already */
2862 spin_unlock_irq(&phba->ndlp_lock);
2865 /* Indicate request for freeing ndlp memory */
2866 NLP_SET_FREE_REQ(ndlp);
2867 spin_unlock_irq(&phba->ndlp_lock);
2869 if (vport->port_type != LPFC_PHYSICAL_PORT &&
2870 ndlp->nlp_DID == Fabric_DID) {
2871 /* Just free up ndlp with Fabric_DID for vports */
2876 /* take care of nodes in unused state before the state
2877 * machine taking action.
2879 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
2884 if (ndlp->nlp_type & NLP_FABRIC)
2885 lpfc_disc_state_machine(vport, ndlp, NULL,
2886 NLP_EVT_DEVICE_RECOVERY);
2888 lpfc_disc_state_machine(vport, ndlp, NULL,
2892 /* At this point, ALL ndlp's should be gone
2893 * because of the previous NLP_EVT_DEVICE_RM.
2894 * Lets wait for this to happen, if needed.
2896 while (!list_empty(&vport->fc_nodes)) {
2898 lpfc_printf_vlog(vport, KERN_ERR,
2900 "0233 Nodelist not empty\n");
2901 list_for_each_entry_safe(ndlp, next_ndlp,
2902 &vport->fc_nodes, nlp_listp) {
2903 lpfc_printf_vlog(ndlp->vport, KERN_ERR,
2905 "0282 did:x%x ndlp:x%px "
2906 "usgmap:x%x refcnt:%d\n",
2907 ndlp->nlp_DID, (void *)ndlp,
2909 kref_read(&ndlp->kref));
2914 /* Wait for any activity on ndlps to settle */
2917 lpfc_cleanup_vports_rrqs(vport, NULL);
2921 * lpfc_stop_vport_timers - Stop all the timers associated with a vport
2922 * @vport: pointer to a virtual N_Port data structure.
2924 * This routine stops all the timers associated with a @vport. This function
2925 * is invoked before disabling or deleting a @vport. Note that the physical
2926 * port is treated as @vport 0.
2929 lpfc_stop_vport_timers(struct lpfc_vport *vport)
2931 del_timer_sync(&vport->els_tmofunc);
2932 del_timer_sync(&vport->delayed_disc_tmo);
2933 lpfc_can_disctmo(vport);
2938 * __lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
2939 * @phba: pointer to lpfc hba data structure.
2941 * This routine stops the SLI4 FCF rediscover wait timer if it's on. The
2942 * caller of this routine should already hold the host lock.
2945 __lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
2947 /* Clear pending FCF rediscovery wait flag */
2948 phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
2950 /* Now, try to stop the timer */
2951 del_timer(&phba->fcf.redisc_wait);
2955 * lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
2956 * @phba: pointer to lpfc hba data structure.
2958 * This routine stops the SLI4 FCF rediscover wait timer if it's on. It
2959 * checks whether the FCF rediscovery wait timer is pending with the host
2960 * lock held before proceeding with disabling the timer and clearing the
2961 * wait timer pendig flag.
2964 lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
2966 spin_lock_irq(&phba->hbalock);
2967 if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
2968 /* FCF rediscovery timer already fired or stopped */
2969 spin_unlock_irq(&phba->hbalock);
2972 __lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
2973 /* Clear failover in progress flags */
2974 phba->fcf.fcf_flag &= ~(FCF_DEAD_DISC | FCF_ACVL_DISC);
2975 spin_unlock_irq(&phba->hbalock);
2979 * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
2980 * @phba: pointer to lpfc hba data structure.
2982 * This routine stops all the timers associated with a HBA. This function is
2983 * invoked before either putting a HBA offline or unloading the driver.
2986 lpfc_stop_hba_timers(struct lpfc_hba *phba)
2989 lpfc_stop_vport_timers(phba->pport);
2990 cancel_delayed_work_sync(&phba->eq_delay_work);
2991 cancel_delayed_work_sync(&phba->idle_stat_delay_work);
2992 del_timer_sync(&phba->sli.mbox_tmo);
2993 del_timer_sync(&phba->fabric_block_timer);
2994 del_timer_sync(&phba->eratt_poll);
2995 del_timer_sync(&phba->hb_tmofunc);
2996 if (phba->sli_rev == LPFC_SLI_REV4) {
2997 del_timer_sync(&phba->rrq_tmr);
2998 phba->hba_flag &= ~HBA_RRQ_ACTIVE;
3000 phba->hb_outstanding = 0;
3002 switch (phba->pci_dev_grp) {
3003 case LPFC_PCI_DEV_LP:
3004 /* Stop any LightPulse device specific driver timers */
3005 del_timer_sync(&phba->fcp_poll_timer);
3007 case LPFC_PCI_DEV_OC:
3008 /* Stop any OneConnect device specific driver timers */
3009 lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
3012 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
3013 "0297 Invalid device group (x%x)\n",
3021 * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
3022 * @phba: pointer to lpfc hba data structure.
3023 * @mbx_action: flag for mailbox no wait action.
3025 * This routine marks a HBA's management interface as blocked. Once the HBA's
3026 * management interface is marked as blocked, all the user space access to
3027 * the HBA, whether they are from sysfs interface or libdfc interface will
3028 * all be blocked. The HBA is set to block the management interface when the
3029 * driver prepares the HBA interface for online or offline.
3032 lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
3034 unsigned long iflag;
3035 uint8_t actcmd = MBX_HEARTBEAT;
3036 unsigned long timeout;
3038 spin_lock_irqsave(&phba->hbalock, iflag);
3039 phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
3040 spin_unlock_irqrestore(&phba->hbalock, iflag);
3041 if (mbx_action == LPFC_MBX_NO_WAIT)
3043 timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
3044 spin_lock_irqsave(&phba->hbalock, iflag);
3045 if (phba->sli.mbox_active) {
3046 actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
3047 /* Determine how long we might wait for the active mailbox
3048 * command to be gracefully completed by firmware.
3050 timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
3051 phba->sli.mbox_active) * 1000) + jiffies;
3053 spin_unlock_irqrestore(&phba->hbalock, iflag);
3055 /* Wait for the outstnading mailbox command to complete */
3056 while (phba->sli.mbox_active) {
3057 /* Check active mailbox complete status every 2ms */
3059 if (time_after(jiffies, timeout)) {
3060 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
3061 "2813 Mgmt IO is Blocked %x "
3062 "- mbox cmd %x still active\n",
3063 phba->sli.sli_flag, actcmd);
3070 * lpfc_sli4_node_prep - Assign RPIs for active nodes.
3071 * @phba: pointer to lpfc hba data structure.
3073 * Allocate RPIs for all active remote nodes. This is needed whenever
3074 * an SLI4 adapter is reset and the driver is not unloading. Its purpose
3075 * is to fixup the temporary rpi assignments.
3078 lpfc_sli4_node_prep(struct lpfc_hba *phba)
3080 struct lpfc_nodelist *ndlp, *next_ndlp;
3081 struct lpfc_vport **vports;
3083 unsigned long flags;
3085 if (phba->sli_rev != LPFC_SLI_REV4)
3088 vports = lpfc_create_vport_work_array(phba);
3092 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
3093 if (vports[i]->load_flag & FC_UNLOADING)
3096 list_for_each_entry_safe(ndlp, next_ndlp,
3097 &vports[i]->fc_nodes,
3099 if (!NLP_CHK_NODE_ACT(ndlp))
3101 rpi = lpfc_sli4_alloc_rpi(phba);
3102 if (rpi == LPFC_RPI_ALLOC_ERROR) {
3103 spin_lock_irqsave(&phba->ndlp_lock, flags);
3104 NLP_CLR_NODE_ACT(ndlp);
3105 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
3108 ndlp->nlp_rpi = rpi;
3109 lpfc_printf_vlog(ndlp->vport, KERN_INFO,
3110 LOG_NODE | LOG_DISCOVERY,
3111 "0009 Assign RPI x%x to ndlp x%px "
3112 "DID:x%06x flg:x%x map:x%x\n",
3113 ndlp->nlp_rpi, ndlp, ndlp->nlp_DID,
3114 ndlp->nlp_flag, ndlp->nlp_usg_map);
3117 lpfc_destroy_vport_work_array(phba, vports);
3121 * lpfc_create_expedite_pool - create expedite pool
3122 * @phba: pointer to lpfc hba data structure.
3124 * This routine moves a batch of XRIs from lpfc_io_buf_list_put of HWQ 0
3125 * to expedite pool. Mark them as expedite.
3127 static void lpfc_create_expedite_pool(struct lpfc_hba *phba)
3129 struct lpfc_sli4_hdw_queue *qp;
3130 struct lpfc_io_buf *lpfc_ncmd;
3131 struct lpfc_io_buf *lpfc_ncmd_next;
3132 struct lpfc_epd_pool *epd_pool;
3133 unsigned long iflag;
3135 epd_pool = &phba->epd_pool;
3136 qp = &phba->sli4_hba.hdwq[0];
3138 spin_lock_init(&epd_pool->lock);
3139 spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
3140 spin_lock(&epd_pool->lock);
3141 INIT_LIST_HEAD(&epd_pool->list);
3142 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3143 &qp->lpfc_io_buf_list_put, list) {
3144 list_move_tail(&lpfc_ncmd->list, &epd_pool->list);
3145 lpfc_ncmd->expedite = true;
3148 if (epd_pool->count >= XRI_BATCH)
3151 spin_unlock(&epd_pool->lock);
3152 spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
3156 * lpfc_destroy_expedite_pool - destroy expedite pool
3157 * @phba: pointer to lpfc hba data structure.
3159 * This routine returns XRIs from expedite pool to lpfc_io_buf_list_put
3160 * of HWQ 0. Clear the mark.
3162 static void lpfc_destroy_expedite_pool(struct lpfc_hba *phba)
3164 struct lpfc_sli4_hdw_queue *qp;
3165 struct lpfc_io_buf *lpfc_ncmd;
3166 struct lpfc_io_buf *lpfc_ncmd_next;
3167 struct lpfc_epd_pool *epd_pool;
3168 unsigned long iflag;
3170 epd_pool = &phba->epd_pool;
3171 qp = &phba->sli4_hba.hdwq[0];
3173 spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
3174 spin_lock(&epd_pool->lock);
3175 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3176 &epd_pool->list, list) {
3177 list_move_tail(&lpfc_ncmd->list,
3178 &qp->lpfc_io_buf_list_put);
3179 lpfc_ncmd->flags = false;
3183 spin_unlock(&epd_pool->lock);
3184 spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
3188 * lpfc_create_multixri_pools - create multi-XRI pools
3189 * @phba: pointer to lpfc hba data structure.
3191 * This routine initialize public, private per HWQ. Then, move XRIs from
3192 * lpfc_io_buf_list_put to public pool. High and low watermark are also
3195 void lpfc_create_multixri_pools(struct lpfc_hba *phba)
3200 struct lpfc_io_buf *lpfc_ncmd;
3201 struct lpfc_io_buf *lpfc_ncmd_next;
3202 unsigned long iflag;
3203 struct lpfc_sli4_hdw_queue *qp;
3204 struct lpfc_multixri_pool *multixri_pool;
3205 struct lpfc_pbl_pool *pbl_pool;
3206 struct lpfc_pvt_pool *pvt_pool;
3208 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3209 "1234 num_hdw_queue=%d num_present_cpu=%d common_xri_cnt=%d\n",
3210 phba->cfg_hdw_queue, phba->sli4_hba.num_present_cpu,
3211 phba->sli4_hba.io_xri_cnt);
3213 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
3214 lpfc_create_expedite_pool(phba);
3216 hwq_count = phba->cfg_hdw_queue;
3217 count_per_hwq = phba->sli4_hba.io_xri_cnt / hwq_count;
3219 for (i = 0; i < hwq_count; i++) {
3220 multixri_pool = kzalloc(sizeof(*multixri_pool), GFP_KERNEL);
3222 if (!multixri_pool) {
3223 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3224 "1238 Failed to allocate memory for "
3227 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
3228 lpfc_destroy_expedite_pool(phba);
3232 qp = &phba->sli4_hba.hdwq[j];
3233 kfree(qp->p_multixri_pool);
3236 phba->cfg_xri_rebalancing = 0;
3240 qp = &phba->sli4_hba.hdwq[i];
3241 qp->p_multixri_pool = multixri_pool;
3243 multixri_pool->xri_limit = count_per_hwq;
3244 multixri_pool->rrb_next_hwqid = i;
3246 /* Deal with public free xri pool */
3247 pbl_pool = &multixri_pool->pbl_pool;
3248 spin_lock_init(&pbl_pool->lock);
3249 spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
3250 spin_lock(&pbl_pool->lock);
3251 INIT_LIST_HEAD(&pbl_pool->list);
3252 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3253 &qp->lpfc_io_buf_list_put, list) {
3254 list_move_tail(&lpfc_ncmd->list, &pbl_pool->list);
3258 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3259 "1235 Moved %d buffers from PUT list over to pbl_pool[%d]\n",
3260 pbl_pool->count, i);
3261 spin_unlock(&pbl_pool->lock);
3262 spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
3264 /* Deal with private free xri pool */
3265 pvt_pool = &multixri_pool->pvt_pool;
3266 pvt_pool->high_watermark = multixri_pool->xri_limit / 2;
3267 pvt_pool->low_watermark = XRI_BATCH;
3268 spin_lock_init(&pvt_pool->lock);
3269 spin_lock_irqsave(&pvt_pool->lock, iflag);
3270 INIT_LIST_HEAD(&pvt_pool->list);
3271 pvt_pool->count = 0;
3272 spin_unlock_irqrestore(&pvt_pool->lock, iflag);
3277 * lpfc_destroy_multixri_pools - destroy multi-XRI pools
3278 * @phba: pointer to lpfc hba data structure.
3280 * This routine returns XRIs from public/private to lpfc_io_buf_list_put.
3282 static void lpfc_destroy_multixri_pools(struct lpfc_hba *phba)
3286 struct lpfc_io_buf *lpfc_ncmd;
3287 struct lpfc_io_buf *lpfc_ncmd_next;
3288 unsigned long iflag;
3289 struct lpfc_sli4_hdw_queue *qp;
3290 struct lpfc_multixri_pool *multixri_pool;
3291 struct lpfc_pbl_pool *pbl_pool;
3292 struct lpfc_pvt_pool *pvt_pool;
3294 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
3295 lpfc_destroy_expedite_pool(phba);
3297 if (!(phba->pport->load_flag & FC_UNLOADING))
3298 lpfc_sli_flush_io_rings(phba);
3300 hwq_count = phba->cfg_hdw_queue;
3302 for (i = 0; i < hwq_count; i++) {
3303 qp = &phba->sli4_hba.hdwq[i];
3304 multixri_pool = qp->p_multixri_pool;
3308 qp->p_multixri_pool = NULL;
3310 spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
3312 /* Deal with public free xri pool */
3313 pbl_pool = &multixri_pool->pbl_pool;
3314 spin_lock(&pbl_pool->lock);
3316 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3317 "1236 Moving %d buffers from pbl_pool[%d] TO PUT list\n",
3318 pbl_pool->count, i);
3320 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3321 &pbl_pool->list, list) {
3322 list_move_tail(&lpfc_ncmd->list,
3323 &qp->lpfc_io_buf_list_put);
3328 INIT_LIST_HEAD(&pbl_pool->list);
3329 pbl_pool->count = 0;
3331 spin_unlock(&pbl_pool->lock);
3333 /* Deal with private free xri pool */
3334 pvt_pool = &multixri_pool->pvt_pool;
3335 spin_lock(&pvt_pool->lock);
3337 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3338 "1237 Moving %d buffers from pvt_pool[%d] TO PUT list\n",
3339 pvt_pool->count, i);
3341 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3342 &pvt_pool->list, list) {
3343 list_move_tail(&lpfc_ncmd->list,
3344 &qp->lpfc_io_buf_list_put);
3349 INIT_LIST_HEAD(&pvt_pool->list);
3350 pvt_pool->count = 0;
3352 spin_unlock(&pvt_pool->lock);
3353 spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
3355 kfree(multixri_pool);
3360 * lpfc_online - Initialize and bring a HBA online
3361 * @phba: pointer to lpfc hba data structure.
3363 * This routine initializes the HBA and brings a HBA online. During this
3364 * process, the management interface is blocked to prevent user space access
3365 * to the HBA interfering with the driver initialization.
3372 lpfc_online(struct lpfc_hba *phba)
3374 struct lpfc_vport *vport;
3375 struct lpfc_vport **vports;
3377 bool vpis_cleared = false;
3381 vport = phba->pport;
3383 if (!(vport->fc_flag & FC_OFFLINE_MODE))
3386 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3387 "0458 Bring Adapter online\n");
3389 lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);
3391 if (phba->sli_rev == LPFC_SLI_REV4) {
3392 if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
3393 lpfc_unblock_mgmt_io(phba);
3396 spin_lock_irq(&phba->hbalock);
3397 if (!phba->sli4_hba.max_cfg_param.vpi_used)
3398 vpis_cleared = true;
3399 spin_unlock_irq(&phba->hbalock);
3401 /* Reestablish the local initiator port.
3402 * The offline process destroyed the previous lport.
3404 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&
3405 !phba->nvmet_support) {
3406 error = lpfc_nvme_create_localport(phba->pport);
3408 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
3409 "6132 NVME restore reg failed "
3410 "on nvmei error x%x\n", error);
3413 lpfc_sli_queue_init(phba);
3414 if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
3415 lpfc_unblock_mgmt_io(phba);
3420 vports = lpfc_create_vport_work_array(phba);
3421 if (vports != NULL) {
3422 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
3423 struct Scsi_Host *shost;
3424 shost = lpfc_shost_from_vport(vports[i]);
3425 spin_lock_irq(shost->host_lock);
3426 vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
3427 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
3428 vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
3429 if (phba->sli_rev == LPFC_SLI_REV4) {
3430 vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
3431 if ((vpis_cleared) &&
3432 (vports[i]->port_type !=
3433 LPFC_PHYSICAL_PORT))
3436 spin_unlock_irq(shost->host_lock);
3439 lpfc_destroy_vport_work_array(phba, vports);
3441 if (phba->cfg_xri_rebalancing)
3442 lpfc_create_multixri_pools(phba);
3444 lpfc_cpuhp_add(phba);
3446 lpfc_unblock_mgmt_io(phba);
3451 * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
3452 * @phba: pointer to lpfc hba data structure.
3454 * This routine marks a HBA's management interface as not blocked. Once the
3455 * HBA's management interface is marked as not blocked, all the user space
3456 * access to the HBA, whether they are from sysfs interface or libdfc
3457 * interface will be allowed. The HBA is set to block the management interface
3458 * when the driver prepares the HBA interface for online or offline and then
3459 * set to unblock the management interface afterwards.
3462 lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
3464 unsigned long iflag;
3466 spin_lock_irqsave(&phba->hbalock, iflag);
3467 phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
3468 spin_unlock_irqrestore(&phba->hbalock, iflag);
3472 * lpfc_offline_prep - Prepare a HBA to be brought offline
3473 * @phba: pointer to lpfc hba data structure.
3474 * @mbx_action: flag for mailbox shutdown action.
3476 * This routine is invoked to prepare a HBA to be brought offline. It performs
3477 * unregistration login to all the nodes on all vports and flushes the mailbox
3478 * queue to make it ready to be brought offline.
3481 lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
3483 struct lpfc_vport *vport = phba->pport;
3484 struct lpfc_nodelist *ndlp, *next_ndlp;
3485 struct lpfc_vport **vports;
3486 struct Scsi_Host *shost;
3489 if (vport->fc_flag & FC_OFFLINE_MODE)
3492 lpfc_block_mgmt_io(phba, mbx_action);
3494 lpfc_linkdown(phba);
3496 /* Issue an unreg_login to all nodes on all vports */
3497 vports = lpfc_create_vport_work_array(phba);
3498 if (vports != NULL) {
3499 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
3500 if (vports[i]->load_flag & FC_UNLOADING)
3502 shost = lpfc_shost_from_vport(vports[i]);
3503 spin_lock_irq(shost->host_lock);
3504 vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
3505 vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
3506 vports[i]->fc_flag &= ~FC_VFI_REGISTERED;
3507 spin_unlock_irq(shost->host_lock);
3509 shost = lpfc_shost_from_vport(vports[i]);
3510 list_for_each_entry_safe(ndlp, next_ndlp,
3511 &vports[i]->fc_nodes,
3513 if ((!NLP_CHK_NODE_ACT(ndlp)) ||
3514 ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
3515 /* Driver must assume RPI is invalid for
3516 * any unused or inactive node.
3518 ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
3522 if (ndlp->nlp_type & NLP_FABRIC) {
3523 lpfc_disc_state_machine(vports[i], ndlp,
3524 NULL, NLP_EVT_DEVICE_RECOVERY);
3525 lpfc_disc_state_machine(vports[i], ndlp,
3526 NULL, NLP_EVT_DEVICE_RM);
3528 spin_lock_irq(shost->host_lock);
3529 ndlp->nlp_flag &= ~NLP_NPR_ADISC;
3530 spin_unlock_irq(shost->host_lock);
3532 * Whenever an SLI4 port goes offline, free the
3533 * RPI. Get a new RPI when the adapter port
3534 * comes back online.
3536 if (phba->sli_rev == LPFC_SLI_REV4) {
3537 lpfc_printf_vlog(ndlp->vport, KERN_INFO,
3538 LOG_NODE | LOG_DISCOVERY,
3539 "0011 Free RPI x%x on "
3540 "ndlp:x%px did x%x "
3542 ndlp->nlp_rpi, ndlp,
3545 lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
3546 ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
3548 lpfc_unreg_rpi(vports[i], ndlp);
3552 lpfc_destroy_vport_work_array(phba, vports);
3554 lpfc_sli_mbox_sys_shutdown(phba, mbx_action);
3557 flush_workqueue(phba->wq);
3561 * lpfc_offline - Bring a HBA offline
3562 * @phba: pointer to lpfc hba data structure.
3564 * This routine actually brings a HBA offline. It stops all the timers
3565 * associated with the HBA, brings down the SLI layer, and eventually
3566 * marks the HBA as in offline state for the upper layer protocol.
3569 lpfc_offline(struct lpfc_hba *phba)
3571 struct Scsi_Host *shost;
3572 struct lpfc_vport **vports;
3575 if (phba->pport->fc_flag & FC_OFFLINE_MODE)
3578 /* stop port and all timers associated with this hba */
3579 lpfc_stop_port(phba);
3581 /* Tear down the local and target port registrations. The
3582 * nvme transports need to cleanup.
3584 lpfc_nvmet_destroy_targetport(phba);
3585 lpfc_nvme_destroy_localport(phba->pport);
3587 vports = lpfc_create_vport_work_array(phba);
3589 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
3590 lpfc_stop_vport_timers(vports[i]);
3591 lpfc_destroy_vport_work_array(phba, vports);
3592 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3593 "0460 Bring Adapter offline\n");
3594 /* Bring down the SLI Layer and cleanup. The HBA is offline
3596 lpfc_sli_hba_down(phba);
3597 spin_lock_irq(&phba->hbalock);
3599 spin_unlock_irq(&phba->hbalock);
3600 vports = lpfc_create_vport_work_array(phba);
3602 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
3603 shost = lpfc_shost_from_vport(vports[i]);
3604 spin_lock_irq(shost->host_lock);
3605 vports[i]->work_port_events = 0;
3606 vports[i]->fc_flag |= FC_OFFLINE_MODE;
3607 spin_unlock_irq(shost->host_lock);
3609 lpfc_destroy_vport_work_array(phba, vports);
3610 __lpfc_cpuhp_remove(phba);
3612 if (phba->cfg_xri_rebalancing)
3613 lpfc_destroy_multixri_pools(phba);
3617 * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
3618 * @phba: pointer to lpfc hba data structure.
3620 * This routine is to free all the SCSI buffers and IOCBs from the driver
3621 * list back to kernel. It is called from lpfc_pci_remove_one to free
3622 * the internal resources before the device is removed from the system.
3625 lpfc_scsi_free(struct lpfc_hba *phba)
3627 struct lpfc_io_buf *sb, *sb_next;
3629 if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
3632 spin_lock_irq(&phba->hbalock);
3634 /* Release all the lpfc_scsi_bufs maintained by this host. */
3636 spin_lock(&phba->scsi_buf_list_put_lock);
3637 list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_put,
3639 list_del(&sb->list);
3640 dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
3643 phba->total_scsi_bufs--;
3645 spin_unlock(&phba->scsi_buf_list_put_lock);
3647 spin_lock(&phba->scsi_buf_list_get_lock);
3648 list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_get,
3650 list_del(&sb->list);
3651 dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
3654 phba->total_scsi_bufs--;
3656 spin_unlock(&phba->scsi_buf_list_get_lock);
3657 spin_unlock_irq(&phba->hbalock);
3661 * lpfc_io_free - Free all the IO buffers and IOCBs from driver lists
3662 * @phba: pointer to lpfc hba data structure.
3664 * This routine is to free all the IO buffers and IOCBs from the driver
3665 * list back to kernel. It is called from lpfc_pci_remove_one to free
3666 * the internal resources before the device is removed from the system.
3669 lpfc_io_free(struct lpfc_hba *phba)
3671 struct lpfc_io_buf *lpfc_ncmd, *lpfc_ncmd_next;
3672 struct lpfc_sli4_hdw_queue *qp;
3675 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
3676 qp = &phba->sli4_hba.hdwq[idx];
3677 /* Release all the lpfc_nvme_bufs maintained by this host. */
3678 spin_lock(&qp->io_buf_list_put_lock);
3679 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3680 &qp->lpfc_io_buf_list_put,
3682 list_del(&lpfc_ncmd->list);
3684 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
3685 lpfc_ncmd->data, lpfc_ncmd->dma_handle);
3686 if (phba->cfg_xpsgl && !phba->nvmet_support)
3687 lpfc_put_sgl_per_hdwq(phba, lpfc_ncmd);
3688 lpfc_put_cmd_rsp_buf_per_hdwq(phba, lpfc_ncmd);
3690 qp->total_io_bufs--;
3692 spin_unlock(&qp->io_buf_list_put_lock);
3694 spin_lock(&qp->io_buf_list_get_lock);
3695 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
3696 &qp->lpfc_io_buf_list_get,
3698 list_del(&lpfc_ncmd->list);
3700 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
3701 lpfc_ncmd->data, lpfc_ncmd->dma_handle);
3702 if (phba->cfg_xpsgl && !phba->nvmet_support)
3703 lpfc_put_sgl_per_hdwq(phba, lpfc_ncmd);
3704 lpfc_put_cmd_rsp_buf_per_hdwq(phba, lpfc_ncmd);
3706 qp->total_io_bufs--;
3708 spin_unlock(&qp->io_buf_list_get_lock);
3713 * lpfc_sli4_els_sgl_update - update ELS xri-sgl sizing and mapping
3714 * @phba: pointer to lpfc hba data structure.
3716 * This routine first calculates the sizes of the current els and allocated
3717 * scsi sgl lists, and then goes through all sgls to updates the physical
3718 * XRIs assigned due to port function reset. During port initialization, the
3719 * current els and allocated scsi sgl lists are 0s.
3722 * 0 - successful (for now, it always returns 0)
3725 lpfc_sli4_els_sgl_update(struct lpfc_hba *phba)
3727 struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
3728 uint16_t i, lxri, xri_cnt, els_xri_cnt;
3729 LIST_HEAD(els_sgl_list);
3733 * update on pci function's els xri-sgl list
3735 els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
3737 if (els_xri_cnt > phba->sli4_hba.els_xri_cnt) {
3738 /* els xri-sgl expanded */
3739 xri_cnt = els_xri_cnt - phba->sli4_hba.els_xri_cnt;
3740 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3741 "3157 ELS xri-sgl count increased from "
3742 "%d to %d\n", phba->sli4_hba.els_xri_cnt,
3744 /* allocate the additional els sgls */
3745 for (i = 0; i < xri_cnt; i++) {
3746 sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
3748 if (sglq_entry == NULL) {
3749 lpfc_printf_log(phba, KERN_ERR,
3751 "2562 Failure to allocate an "
3752 "ELS sgl entry:%d\n", i);
3756 sglq_entry->buff_type = GEN_BUFF_TYPE;
3757 sglq_entry->virt = lpfc_mbuf_alloc(phba, 0,
3759 if (sglq_entry->virt == NULL) {
3761 lpfc_printf_log(phba, KERN_ERR,
3763 "2563 Failure to allocate an "
3764 "ELS mbuf:%d\n", i);
3768 sglq_entry->sgl = sglq_entry->virt;
3769 memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
3770 sglq_entry->state = SGL_FREED;
3771 list_add_tail(&sglq_entry->list, &els_sgl_list);
3773 spin_lock_irq(&phba->hbalock);
3774 spin_lock(&phba->sli4_hba.sgl_list_lock);
3775 list_splice_init(&els_sgl_list,
3776 &phba->sli4_hba.lpfc_els_sgl_list);
3777 spin_unlock(&phba->sli4_hba.sgl_list_lock);
3778 spin_unlock_irq(&phba->hbalock);
3779 } else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
3780 /* els xri-sgl shrinked */
3781 xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt;
3782 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3783 "3158 ELS xri-sgl count decreased from "
3784 "%d to %d\n", phba->sli4_hba.els_xri_cnt,
3786 spin_lock_irq(&phba->hbalock);
3787 spin_lock(&phba->sli4_hba.sgl_list_lock);
3788 list_splice_init(&phba->sli4_hba.lpfc_els_sgl_list,
3790 /* release extra els sgls from list */
3791 for (i = 0; i < xri_cnt; i++) {
3792 list_remove_head(&els_sgl_list,
3793 sglq_entry, struct lpfc_sglq, list);
3795 __lpfc_mbuf_free(phba, sglq_entry->virt,
3800 list_splice_init(&els_sgl_list,
3801 &phba->sli4_hba.lpfc_els_sgl_list);
3802 spin_unlock(&phba->sli4_hba.sgl_list_lock);
3803 spin_unlock_irq(&phba->hbalock);
3805 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3806 "3163 ELS xri-sgl count unchanged: %d\n",
3808 phba->sli4_hba.els_xri_cnt = els_xri_cnt;
3810 /* update xris to els sgls on the list */
3812 sglq_entry_next = NULL;
3813 list_for_each_entry_safe(sglq_entry, sglq_entry_next,
3814 &phba->sli4_hba.lpfc_els_sgl_list, list) {
3815 lxri = lpfc_sli4_next_xritag(phba);
3816 if (lxri == NO_XRI) {
3817 lpfc_printf_log(phba, KERN_ERR,
3819 "2400 Failed to allocate xri for "
3824 sglq_entry->sli4_lxritag = lxri;
3825 sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
3830 lpfc_free_els_sgl_list(phba);
3835 * lpfc_sli4_nvmet_sgl_update - update xri-sgl sizing and mapping
3836 * @phba: pointer to lpfc hba data structure.
3838 * This routine first calculates the sizes of the current els and allocated
3839 * scsi sgl lists, and then goes through all sgls to updates the physical
3840 * XRIs assigned due to port function reset. During port initialization, the
3841 * current els and allocated scsi sgl lists are 0s.
3844 * 0 - successful (for now, it always returns 0)
3847 lpfc_sli4_nvmet_sgl_update(struct lpfc_hba *phba)
3849 struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
3850 uint16_t i, lxri, xri_cnt, els_xri_cnt;
3851 uint16_t nvmet_xri_cnt;
3852 LIST_HEAD(nvmet_sgl_list);
3856 * update on pci function's nvmet xri-sgl list
3858 els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
3860 /* For NVMET, ALL remaining XRIs are dedicated for IO processing */
3861 nvmet_xri_cnt = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
3862 if (nvmet_xri_cnt > phba->sli4_hba.nvmet_xri_cnt) {
3863 /* els xri-sgl expanded */
3864 xri_cnt = nvmet_xri_cnt - phba->sli4_hba.nvmet_xri_cnt;
3865 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3866 "6302 NVMET xri-sgl cnt grew from %d to %d\n",
3867 phba->sli4_hba.nvmet_xri_cnt, nvmet_xri_cnt);
3868 /* allocate the additional nvmet sgls */
3869 for (i = 0; i < xri_cnt; i++) {
3870 sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
3872 if (sglq_entry == NULL) {
3873 lpfc_printf_log(phba, KERN_ERR,
3875 "6303 Failure to allocate an "
3876 "NVMET sgl entry:%d\n", i);
3880 sglq_entry->buff_type = NVMET_BUFF_TYPE;
3881 sglq_entry->virt = lpfc_nvmet_buf_alloc(phba, 0,
3883 if (sglq_entry->virt == NULL) {
3885 lpfc_printf_log(phba, KERN_ERR,
3887 "6304 Failure to allocate an "
3888 "NVMET buf:%d\n", i);
3892 sglq_entry->sgl = sglq_entry->virt;
3893 memset(sglq_entry->sgl, 0,
3894 phba->cfg_sg_dma_buf_size);
3895 sglq_entry->state = SGL_FREED;
3896 list_add_tail(&sglq_entry->list, &nvmet_sgl_list);
3898 spin_lock_irq(&phba->hbalock);
3899 spin_lock(&phba->sli4_hba.sgl_list_lock);
3900 list_splice_init(&nvmet_sgl_list,
3901 &phba->sli4_hba.lpfc_nvmet_sgl_list);
3902 spin_unlock(&phba->sli4_hba.sgl_list_lock);
3903 spin_unlock_irq(&phba->hbalock);
3904 } else if (nvmet_xri_cnt < phba->sli4_hba.nvmet_xri_cnt) {
3905 /* nvmet xri-sgl shrunk */
3906 xri_cnt = phba->sli4_hba.nvmet_xri_cnt - nvmet_xri_cnt;
3907 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3908 "6305 NVMET xri-sgl count decreased from "
3909 "%d to %d\n", phba->sli4_hba.nvmet_xri_cnt,
3911 spin_lock_irq(&phba->hbalock);
3912 spin_lock(&phba->sli4_hba.sgl_list_lock);
3913 list_splice_init(&phba->sli4_hba.lpfc_nvmet_sgl_list,
3915 /* release extra nvmet sgls from list */
3916 for (i = 0; i < xri_cnt; i++) {
3917 list_remove_head(&nvmet_sgl_list,
3918 sglq_entry, struct lpfc_sglq, list);
3920 lpfc_nvmet_buf_free(phba, sglq_entry->virt,
3925 list_splice_init(&nvmet_sgl_list,
3926 &phba->sli4_hba.lpfc_nvmet_sgl_list);
3927 spin_unlock(&phba->sli4_hba.sgl_list_lock);
3928 spin_unlock_irq(&phba->hbalock);
3930 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3931 "6306 NVMET xri-sgl count unchanged: %d\n",
3933 phba->sli4_hba.nvmet_xri_cnt = nvmet_xri_cnt;
3935 /* update xris to nvmet sgls on the list */
3937 sglq_entry_next = NULL;
3938 list_for_each_entry_safe(sglq_entry, sglq_entry_next,
3939 &phba->sli4_hba.lpfc_nvmet_sgl_list, list) {
3940 lxri = lpfc_sli4_next_xritag(phba);
3941 if (lxri == NO_XRI) {
3942 lpfc_printf_log(phba, KERN_ERR,
3944 "6307 Failed to allocate xri for "
3949 sglq_entry->sli4_lxritag = lxri;
3950 sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
3955 lpfc_free_nvmet_sgl_list(phba);
3960 lpfc_io_buf_flush(struct lpfc_hba *phba, struct list_head *cbuf)
3963 struct lpfc_sli4_hdw_queue *qp;
3964 struct lpfc_io_buf *lpfc_cmd;
3965 struct lpfc_io_buf *iobufp, *prev_iobufp;
3966 int idx, cnt, xri, inserted;
3969 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
3970 qp = &phba->sli4_hba.hdwq[idx];
3971 spin_lock_irq(&qp->io_buf_list_get_lock);
3972 spin_lock(&qp->io_buf_list_put_lock);
3974 /* Take everything off the get and put lists */
3975 list_splice_init(&qp->lpfc_io_buf_list_get, &blist);
3976 list_splice(&qp->lpfc_io_buf_list_put, &blist);
3977 INIT_LIST_HEAD(&qp->lpfc_io_buf_list_get);
3978 INIT_LIST_HEAD(&qp->lpfc_io_buf_list_put);
3979 cnt += qp->get_io_bufs + qp->put_io_bufs;
3980 qp->get_io_bufs = 0;
3981 qp->put_io_bufs = 0;
3982 qp->total_io_bufs = 0;
3983 spin_unlock(&qp->io_buf_list_put_lock);
3984 spin_unlock_irq(&qp->io_buf_list_get_lock);
3988 * Take IO buffers off blist and put on cbuf sorted by XRI.
3989 * This is because POST_SGL takes a sequential range of XRIs
3990 * to post to the firmware.
3992 for (idx = 0; idx < cnt; idx++) {
3993 list_remove_head(&blist, lpfc_cmd, struct lpfc_io_buf, list);
3997 list_add_tail(&lpfc_cmd->list, cbuf);
4000 xri = lpfc_cmd->cur_iocbq.sli4_xritag;
4003 list_for_each_entry(iobufp, cbuf, list) {
4004 if (xri < iobufp->cur_iocbq.sli4_xritag) {
4006 list_add(&lpfc_cmd->list,
4007 &prev_iobufp->list);
4009 list_add(&lpfc_cmd->list, cbuf);
4013 prev_iobufp = iobufp;
4016 list_add_tail(&lpfc_cmd->list, cbuf);
4022 lpfc_io_buf_replenish(struct lpfc_hba *phba, struct list_head *cbuf)
4024 struct lpfc_sli4_hdw_queue *qp;
4025 struct lpfc_io_buf *lpfc_cmd;
4028 qp = phba->sli4_hba.hdwq;
4030 while (!list_empty(cbuf)) {
4031 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
4032 list_remove_head(cbuf, lpfc_cmd,
4033 struct lpfc_io_buf, list);
4037 qp = &phba->sli4_hba.hdwq[idx];
4038 lpfc_cmd->hdwq_no = idx;
4039 lpfc_cmd->hdwq = qp;
4040 lpfc_cmd->cur_iocbq.wqe_cmpl = NULL;
4041 lpfc_cmd->cur_iocbq.iocb_cmpl = NULL;
4042 spin_lock(&qp->io_buf_list_put_lock);
4043 list_add_tail(&lpfc_cmd->list,
4044 &qp->lpfc_io_buf_list_put);
4046 qp->total_io_bufs++;
4047 spin_unlock(&qp->io_buf_list_put_lock);
4054 * lpfc_sli4_io_sgl_update - update xri-sgl sizing and mapping
4055 * @phba: pointer to lpfc hba data structure.
4057 * This routine first calculates the sizes of the current els and allocated
4058 * scsi sgl lists, and then goes through all sgls to updates the physical
4059 * XRIs assigned due to port function reset. During port initialization, the
4060 * current els and allocated scsi sgl lists are 0s.
4063 * 0 - successful (for now, it always returns 0)
4066 lpfc_sli4_io_sgl_update(struct lpfc_hba *phba)
4068 struct lpfc_io_buf *lpfc_ncmd = NULL, *lpfc_ncmd_next = NULL;
4069 uint16_t i, lxri, els_xri_cnt;
4070 uint16_t io_xri_cnt, io_xri_max;
4071 LIST_HEAD(io_sgl_list);
4075 * update on pci function's allocated nvme xri-sgl list
4078 /* maximum number of xris available for nvme buffers */
4079 els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
4080 io_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
4081 phba->sli4_hba.io_xri_max = io_xri_max;
4083 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
4084 "6074 Current allocated XRI sgl count:%d, "
4085 "maximum XRI count:%d\n",
4086 phba->sli4_hba.io_xri_cnt,
4087 phba->sli4_hba.io_xri_max);
4089 cnt = lpfc_io_buf_flush(phba, &io_sgl_list);
4091 if (phba->sli4_hba.io_xri_cnt > phba->sli4_hba.io_xri_max) {
4092 /* max nvme xri shrunk below the allocated nvme buffers */
4093 io_xri_cnt = phba->sli4_hba.io_xri_cnt -
4094 phba->sli4_hba.io_xri_max;
4095 /* release the extra allocated nvme buffers */
4096 for (i = 0; i < io_xri_cnt; i++) {
4097 list_remove_head(&io_sgl_list, lpfc_ncmd,
4098 struct lpfc_io_buf, list);
4100 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
4102 lpfc_ncmd->dma_handle);
4106 phba->sli4_hba.io_xri_cnt -= io_xri_cnt;
4109 /* update xris associated to remaining allocated nvme buffers */
4111 lpfc_ncmd_next = NULL;
4112 phba->sli4_hba.io_xri_cnt = cnt;
4113 list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
4114 &io_sgl_list, list) {
4115 lxri = lpfc_sli4_next_xritag(phba);
4116 if (lxri == NO_XRI) {
4117 lpfc_printf_log(phba, KERN_ERR,
4119 "6075 Failed to allocate xri for "
4124 lpfc_ncmd->cur_iocbq.sli4_lxritag = lxri;
4125 lpfc_ncmd->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
4127 cnt = lpfc_io_buf_replenish(phba, &io_sgl_list);
4136 * lpfc_new_io_buf - IO buffer allocator for HBA with SLI4 IF spec
4137 * @phba: Pointer to lpfc hba data structure.
4138 * @num_to_alloc: The requested number of buffers to allocate.
4140 * This routine allocates nvme buffers for device with SLI-4 interface spec,
4141 * the nvme buffer contains all the necessary information needed to initiate
4142 * an I/O. After allocating up to @num_to_allocate IO buffers and put
4143 * them on a list, it post them to the port by using SGL block post.
4146 * int - number of IO buffers that were allocated and posted.
4147 * 0 = failure, less than num_to_alloc is a partial failure.
4150 lpfc_new_io_buf(struct lpfc_hba *phba, int num_to_alloc)
4152 struct lpfc_io_buf *lpfc_ncmd;
4153 struct lpfc_iocbq *pwqeq;
4154 uint16_t iotag, lxri = 0;
4155 int bcnt, num_posted;
4156 LIST_HEAD(prep_nblist);
4157 LIST_HEAD(post_nblist);
4158 LIST_HEAD(nvme_nblist);
4160 phba->sli4_hba.io_xri_cnt = 0;
4161 for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
4162 lpfc_ncmd = kzalloc(sizeof(*lpfc_ncmd), GFP_KERNEL);
4166 * Get memory from the pci pool to map the virt space to
4167 * pci bus space for an I/O. The DMA buffer includes the
4168 * number of SGE's necessary to support the sg_tablesize.
4170 lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
4172 &lpfc_ncmd->dma_handle);
4173 if (!lpfc_ncmd->data) {
4178 if (phba->cfg_xpsgl && !phba->nvmet_support) {
4179 INIT_LIST_HEAD(&lpfc_ncmd->dma_sgl_xtra_list);
4182 * 4K Page alignment is CRITICAL to BlockGuard, double
4185 if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
4186 (((unsigned long)(lpfc_ncmd->data) &
4187 (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
4188 lpfc_printf_log(phba, KERN_ERR,
4190 "3369 Memory alignment err: "
4192 (unsigned long)lpfc_ncmd->data);
4193 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
4195 lpfc_ncmd->dma_handle);
4201 INIT_LIST_HEAD(&lpfc_ncmd->dma_cmd_rsp_list);
4203 lxri = lpfc_sli4_next_xritag(phba);
4204 if (lxri == NO_XRI) {
4205 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
4206 lpfc_ncmd->data, lpfc_ncmd->dma_handle);
4210 pwqeq = &lpfc_ncmd->cur_iocbq;
4212 /* Allocate iotag for lpfc_ncmd->cur_iocbq. */
4213 iotag = lpfc_sli_next_iotag(phba, pwqeq);
4215 dma_pool_free(phba->lpfc_sg_dma_buf_pool,
4216 lpfc_ncmd->data, lpfc_ncmd->dma_handle);
4218 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
4219 "6121 Failed to allocate IOTAG for"
4220 " XRI:0x%x\n", lxri);
4221 lpfc_sli4_free_xri(phba, lxri);
4224 pwqeq->sli4_lxritag = lxri;
4225 pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
4226 pwqeq->context1 = lpfc_ncmd;
4228 /* Initialize local short-hand pointers. */
4229 lpfc_ncmd->dma_sgl = lpfc_ncmd->data;
4230 lpfc_ncmd->dma_phys_sgl = lpfc_ncmd->dma_handle;
4231 lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
4232 spin_lock_init(&lpfc_ncmd->buf_lock);
4234 /* add the nvme buffer to a post list */
4235 list_add_tail(&lpfc_ncmd->list, &post_nblist);
4236 phba->sli4_hba.io_xri_cnt++;
4238 lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
4239 "6114 Allocate %d out of %d requested new NVME "
4240 "buffers\n", bcnt, num_to_alloc);
4242 /* post the list of nvme buffer sgls to port if available */
4243 if (!list_empty(&post_nblist))
4244 num_posted = lpfc_sli4_post_io_sgl_list(
4245 phba, &post_nblist, bcnt);
4253 lpfc_get_wwpn(struct lpfc_hba *phba)
4257 LPFC_MBOXQ_t *mboxq;
4260 mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
4263 return (uint64_t)-1;
4265 /* First get WWN of HBA instance */
4266 lpfc_read_nv(phba, mboxq);
4267 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
4268 if (rc != MBX_SUCCESS) {
4269 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
4270 "6019 Mailbox failed , mbxCmd x%x "
4271 "READ_NV, mbxStatus x%x\n",
4272 bf_get(lpfc_mqe_command, &mboxq->u.mqe),
4273 bf_get(lpfc_mqe_status, &mboxq->u.mqe));
4274 mempool_free(mboxq, phba->mbox_mem_pool);
4275 return (uint64_t) -1;
4278 memcpy(&wwn, (char *)mb->un.varRDnvp.portname, sizeof(uint64_t));
4279 /* wwn is WWPN of HBA instance */
4280 mempool_free(mboxq, phba->mbox_mem_pool);
4281 if (phba->sli_rev == LPFC_SLI_REV4)
4282 return be64_to_cpu(wwn);
4284 return rol64(wwn, 32);
4288 * lpfc_create_port - Create an FC port
4289 * @phba: pointer to lpfc hba data structure.
4290 * @instance: a unique integer ID to this FC port.
4291 * @dev: pointer to the device data structure.
4293 * This routine creates a FC port for the upper layer protocol. The FC port
4294 * can be created on top of either a physical port or a virtual port provided
4295 * by the HBA. This routine also allocates a SCSI host data structure (shost)
4296 * and associates the FC port created before adding the shost into the SCSI
4300 * @vport - pointer to the virtual N_Port data structure.
4301 * NULL - port create failed.
4304 lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
4306 struct lpfc_vport *vport;
4307 struct Scsi_Host *shost = NULL;
4308 struct scsi_host_template *template;
4312 bool use_no_reset_hba = false;
4315 if (lpfc_no_hba_reset_cnt) {
4316 if (phba->sli_rev < LPFC_SLI_REV4 &&
4317 dev == &phba->pcidev->dev) {
4318 /* Reset the port first */
4319 lpfc_sli_brdrestart(phba);
4320 rc = lpfc_sli_chipset_init(phba);
4324 wwn = lpfc_get_wwpn(phba);
4327 for (i = 0; i < lpfc_no_hba_reset_cnt; i++) {
4328 if (wwn == lpfc_no_hba_reset[i]) {
4329 lpfc_printf_log(phba, KERN_ERR,
4331 "6020 Setting use_no_reset port=%llx\n",
4333 use_no_reset_hba = true;
4338 /* Seed template for SCSI host registration */
4339 if (dev == &phba->pcidev->dev) {
4340 template = &phba->port_template;
4342 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
4343 /* Seed physical port template */
4344 memcpy(template, &lpfc_template, sizeof(*template));
4346 if (use_no_reset_hba) {
4347 /* template is for a no reset SCSI Host */
4348 template->max_sectors = 0xffff;
4349 template->eh_host_reset_handler = NULL;
4352 /* Template for all vports this physical port creates */
4353 memcpy(&phba->vport_template, &lpfc_template,
4355 phba->vport_template.max_sectors = 0xffff;
4356 phba->vport_template.shost_attrs = lpfc_vport_attrs;
4357 phba->vport_template.eh_bus_reset_handler = NULL;
4358 phba->vport_template.eh_host_reset_handler = NULL;
4359 phba->vport_template.vendor_id = 0;
4361 /* Initialize the host templates with updated value */
4362 if (phba->sli_rev == LPFC_SLI_REV4) {
4363 template->sg_tablesize = phba->cfg_scsi_seg_cnt;
4364 phba->vport_template.sg_tablesize =
4365 phba->cfg_scsi_seg_cnt;
4367 template->sg_tablesize = phba->cfg_sg_seg_cnt;
4368 phba->vport_template.sg_tablesize =
4369 phba->cfg_sg_seg_cnt;
4373 /* NVMET is for physical port only */
4374 memcpy(template, &lpfc_template_nvme,
4378 template = &phba->vport_template;
4381 shost = scsi_host_alloc(template, sizeof(struct lpfc_vport));
4385 vport = (struct lpfc_vport *) shost->hostdata;
4387 vport->load_flag |= FC_LOADING;
4388 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
4389 vport->fc_rscn_flush = 0;
4390 lpfc_get_vport_cfgparam(vport);
4392 /* Adjust value in vport */
4393 vport->cfg_enable_fc4_type = phba->cfg_enable_fc4_type;
4395 shost->unique_id = instance;
4396 shost->max_id = LPFC_MAX_TARGET;
4397 shost->max_lun = vport->cfg_max_luns;
4398 shost->this_id = -1;
4399 shost->max_cmd_len = 16;
4401 if (phba->sli_rev == LPFC_SLI_REV4) {
4402 if (!phba->cfg_fcp_mq_threshold ||
4403 phba->cfg_fcp_mq_threshold > phba->cfg_hdw_queue)
4404 phba->cfg_fcp_mq_threshold = phba->cfg_hdw_queue;
4406 shost->nr_hw_queues = min_t(int, 2 * num_possible_nodes(),
4407 phba->cfg_fcp_mq_threshold);
4409 shost->dma_boundary =
4410 phba->sli4_hba.pc_sli4_params.sge_supp_len-1;
4412 if (phba->cfg_xpsgl && !phba->nvmet_support)
4413 shost->sg_tablesize = LPFC_MAX_SG_TABLESIZE;
4415 shost->sg_tablesize = phba->cfg_scsi_seg_cnt;
4417 /* SLI-3 has a limited number of hardware queues (3),
4418 * thus there is only one for FCP processing.
4420 shost->nr_hw_queues = 1;
4423 * Set initial can_queue value since 0 is no longer supported and
4424 * scsi_add_host will fail. This will be adjusted later based on the
4425 * max xri value determined in hba setup.
4427 shost->can_queue = phba->cfg_hba_queue_depth - 10;
4428 if (dev != &phba->pcidev->dev) {
4429 shost->transportt = lpfc_vport_transport_template;
4430 vport->port_type = LPFC_NPIV_PORT;
4432 shost->transportt = lpfc_transport_template;
4433 vport->port_type = LPFC_PHYSICAL_PORT;
4436 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
4437 "9081 CreatePort TMPLATE type %x TBLsize %d "
4439 vport->port_type, shost->sg_tablesize,
4440 phba->cfg_scsi_seg_cnt, phba->cfg_sg_seg_cnt);
4442 /* Initialize all internally managed lists. */
4443 INIT_LIST_HEAD(&vport->fc_nodes);
4444 INIT_LIST_HEAD(&vport->rcv_buffer_list);
4445 spin_lock_init(&vport->work_port_lock);
4447 timer_setup(&vport->fc_disctmo, lpfc_disc_timeout, 0);
4449 timer_setup(&vport->els_tmofunc, lpfc_els_timeout, 0);
4451 timer_setup(&vport->delayed_disc_tmo, lpfc_delayed_disc_tmo, 0);
4453 if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
4454 lpfc_setup_bg(phba, shost);
4456 error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
4460 spin_lock_irq(&phba->port_list_lock);
4461 list_add_tail(&vport->listentry, &phba->port_list);
4462 spin_unlock_irq(&phba->port_list_lock);
4466 scsi_host_put(shost);
4472 * destroy_port - destroy an FC port
4473 * @vport: pointer to an lpfc virtual N_Port data structure.
4475 * This routine destroys a FC port from the upper layer protocol. All the
4476 * resources associated with the port are released.
4479 destroy_port(struct lpfc_vport *vport)
4481 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4482 struct lpfc_hba *phba = vport->phba;
4484 lpfc_debugfs_terminate(vport);
4485 fc_remove_host(shost);
4486 scsi_remove_host(shost);
4488 spin_lock_irq(&phba->port_list_lock);
4489 list_del_init(&vport->listentry);
4490 spin_unlock_irq(&phba->port_list_lock);
4492 lpfc_cleanup(vport);
4497 * lpfc_get_instance - Get a unique integer ID
4499 * This routine allocates a unique integer ID from lpfc_hba_index pool. It
4500 * uses the kernel idr facility to perform the task.
4503 * instance - a unique integer ID allocated as the new instance.
4504 * -1 - lpfc get instance failed.
4507 lpfc_get_instance(void)
4511 ret = idr_alloc(&lpfc_hba_index, NULL, 0, 0, GFP_KERNEL);
4512 return ret < 0 ? -1 : ret;
4516 * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
4517 * @shost: pointer to SCSI host data structure.
4518 * @time: elapsed time of the scan in jiffies.
4520 * This routine is called by the SCSI layer with a SCSI host to determine
4521 * whether the scan host is finished.
4523 * Note: there is no scan_start function as adapter initialization will have
4524 * asynchronously kicked off the link initialization.
4527 * 0 - SCSI host scan is not over yet.
4528 * 1 - SCSI host scan is over.
4530 int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
4532 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4533 struct lpfc_hba *phba = vport->phba;
4536 spin_lock_irq(shost->host_lock);
4538 if (vport->load_flag & FC_UNLOADING) {
4542 if (time >= msecs_to_jiffies(30 * 1000)) {
4543 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
4544 "0461 Scanning longer than 30 "
4545 "seconds. Continuing initialization\n");
4549 if (time >= msecs_to_jiffies(15 * 1000) &&
4550 phba->link_state <= LPFC_LINK_DOWN) {
4551 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
4552 "0465 Link down longer than 15 "
4553 "seconds. Continuing initialization\n");
4558 if (vport->port_state != LPFC_VPORT_READY)
4560 if (vport->num_disc_nodes || vport->fc_prli_sent)
4562 if (vport->fc_map_cnt == 0 && time < msecs_to_jiffies(2 * 1000))
4564 if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
4570 spin_unlock_irq(shost->host_lock);
4574 static void lpfc_host_supported_speeds_set(struct Scsi_Host *shost)
4576 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
4577 struct lpfc_hba *phba = vport->phba;
4579 fc_host_supported_speeds(shost) = 0;
4581 * Avoid reporting supported link speed for FCoE as it can't be
4582 * controlled via FCoE.
4584 if (phba->hba_flag & HBA_FCOE_MODE)
4587 if (phba->lmt & LMT_128Gb)
4588 fc_host_supported_speeds(shost) |= FC_PORTSPEED_128GBIT;
4589 if (phba->lmt & LMT_64Gb)
4590 fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT;
4591 if (phba->lmt & LMT_32Gb)
4592 fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT;
4593 if (phba->lmt & LMT_16Gb)
4594 fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
4595 if (phba->lmt & LMT_10Gb)
4596 fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
4597 if (phba->lmt & LMT_8Gb)
4598 fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
4599 if (phba->lmt & LMT_4Gb)
4600 fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
4601 if (phba->lmt & LMT_2Gb)
4602 fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
4603 if (phba->lmt & LMT_1Gb)
4604 fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
4608 * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
4609 * @shost: pointer to SCSI host data structure.
4611 * This routine initializes a given SCSI host attributes on a FC port. The
4612 * SCSI host can be either on top of a physical port or a virtual port.
4614 void lpfc_host_attrib_init(struct Scsi_Host *shost)
4616 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4617 struct lpfc_hba *phba = vport->phba;
4619 * Set fixed host attributes. Must done after lpfc_sli_hba_setup().
4622 fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
4623 fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
4624 fc_host_supported_classes(shost) = FC_COS_CLASS3;
4626 memset(fc_host_supported_fc4s(shost), 0,
4627 sizeof(fc_host_supported_fc4s(shost)));
4628 fc_host_supported_fc4s(shost)[2] = 1;
4629 fc_host_supported_fc4s(shost)[7] = 1;
4631 lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
4632 sizeof fc_host_symbolic_name(shost));
4634 lpfc_host_supported_speeds_set(shost);
4636 fc_host_maxframe_size(shost) =
4637 (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
4638 (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;
4640 fc_host_dev_loss_tmo(shost) = vport->cfg_devloss_tmo;
4642 /* This value is also unchanging */
4643 memset(fc_host_active_fc4s(shost), 0,
4644 sizeof(fc_host_active_fc4s(shost)));
4645 fc_host_active_fc4s(shost)[2] = 1;
4646 fc_host_active_fc4s(shost)[7] = 1;
4648 fc_host_max_npiv_vports(shost) = phba->max_vpi;
4649 spin_lock_irq(shost->host_lock);
4650 vport->load_flag &= ~FC_LOADING;
4651 spin_unlock_irq(shost->host_lock);
4655 * lpfc_stop_port_s3 - Stop SLI3 device port
4656 * @phba: pointer to lpfc hba data structure.
4658 * This routine is invoked to stop an SLI3 device port, it stops the device
4659 * from generating interrupts and stops the device driver's timers for the
4663 lpfc_stop_port_s3(struct lpfc_hba *phba)
4665 /* Clear all interrupt enable conditions */
4666 writel(0, phba->HCregaddr);
4667 readl(phba->HCregaddr); /* flush */
4668 /* Clear all pending interrupts */
4669 writel(0xffffffff, phba->HAregaddr);
4670 readl(phba->HAregaddr); /* flush */
4672 /* Reset some HBA SLI setup states */
4673 lpfc_stop_hba_timers(phba);
4674 phba->pport->work_port_events = 0;
4678 * lpfc_stop_port_s4 - Stop SLI4 device port
4679 * @phba: pointer to lpfc hba data structure.
4681 * This routine is invoked to stop an SLI4 device port, it stops the device
4682 * from generating interrupts and stops the device driver's timers for the
4686 lpfc_stop_port_s4(struct lpfc_hba *phba)
4688 /* Reset some HBA SLI4 setup states */
4689 lpfc_stop_hba_timers(phba);
4691 phba->pport->work_port_events = 0;
4692 phba->sli4_hba.intr_enable = 0;
4696 * lpfc_stop_port - Wrapper function for stopping hba port
4697 * @phba: Pointer to HBA context object.
4699 * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
4700 * the API jump table function pointer from the lpfc_hba struct.
4703 lpfc_stop_port(struct lpfc_hba *phba)
4705 phba->lpfc_stop_port(phba);
4708 flush_workqueue(phba->wq);
4712 * lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer
4713 * @phba: Pointer to hba for which this call is being executed.
4715 * This routine starts the timer waiting for the FCF rediscovery to complete.
4718 lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *phba)
4720 unsigned long fcf_redisc_wait_tmo =
4721 (jiffies + msecs_to_jiffies(LPFC_FCF_REDISCOVER_WAIT_TMO));
4722 /* Start fcf rediscovery wait period timer */
4723 mod_timer(&phba->fcf.redisc_wait, fcf_redisc_wait_tmo);
4724 spin_lock_irq(&phba->hbalock);
4725 /* Allow action to new fcf asynchronous event */
4726 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
4727 /* Mark the FCF rediscovery pending state */
4728 phba->fcf.fcf_flag |= FCF_REDISC_PEND;
4729 spin_unlock_irq(&phba->hbalock);
4733 * lpfc_sli4_fcf_redisc_wait_tmo - FCF table rediscover wait timeout
4734 * @t: Timer context used to obtain the pointer to lpfc hba data structure.
4736 * This routine is invoked when waiting for FCF table rediscover has been
4737 * timed out. If new FCF record(s) has (have) been discovered during the
4738 * wait period, a new FCF event shall be added to the FCOE async event
4739 * list, and then worker thread shall be waked up for processing from the
4740 * worker thread context.
4743 lpfc_sli4_fcf_redisc_wait_tmo(struct timer_list *t)
4745 struct lpfc_hba *phba = from_timer(phba, t, fcf.redisc_wait);
4747 /* Don't send FCF rediscovery event if timer cancelled */
4748 spin_lock_irq(&phba->hbalock);
4749 if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
4750 spin_unlock_irq(&phba->hbalock);
4753 /* Clear FCF rediscovery timer pending flag */
4754 phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
4755 /* FCF rediscovery event to worker thread */
4756 phba->fcf.fcf_flag |= FCF_REDISC_EVT;
4757 spin_unlock_irq(&phba->hbalock);
4758 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
4759 "2776 FCF rediscover quiescent timer expired\n");
4760 /* wake up worker thread */
4761 lpfc_worker_wake_up(phba);
4765 * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
4766 * @phba: pointer to lpfc hba data structure.
4767 * @acqe_link: pointer to the async link completion queue entry.
4769 * This routine is to parse the SLI4 link-attention link fault code.
4772 lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
4773 struct lpfc_acqe_link *acqe_link)
4775 switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
4776 case LPFC_ASYNC_LINK_FAULT_NONE:
4777 case LPFC_ASYNC_LINK_FAULT_LOCAL:
4778 case LPFC_ASYNC_LINK_FAULT_REMOTE:
4779 case LPFC_ASYNC_LINK_FAULT_LR_LRR:
4782 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
4783 "0398 Unknown link fault code: x%x\n",
4784 bf_get(lpfc_acqe_link_fault, acqe_link));
4790 * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
4791 * @phba: pointer to lpfc hba data structure.
4792 * @acqe_link: pointer to the async link completion queue entry.
4794 * This routine is to parse the SLI4 link attention type and translate it
4795 * into the base driver's link attention type coding.
4797 * Return: Link attention type in terms of base driver's coding.
4800 lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
4801 struct lpfc_acqe_link *acqe_link)
4805 switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
4806 case LPFC_ASYNC_LINK_STATUS_DOWN:
4807 case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
4808 att_type = LPFC_ATT_LINK_DOWN;
4810 case LPFC_ASYNC_LINK_STATUS_UP:
4811 /* Ignore physical link up events - wait for logical link up */
4812 att_type = LPFC_ATT_RESERVED;
4814 case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
4815 att_type = LPFC_ATT_LINK_UP;
4818 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
4819 "0399 Invalid link attention type: x%x\n",
4820 bf_get(lpfc_acqe_link_status, acqe_link));
4821 att_type = LPFC_ATT_RESERVED;
4828 * lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
4829 * @phba: pointer to lpfc hba data structure.
4831 * This routine is to get an SLI3 FC port's link speed in Mbps.
4833 * Return: link speed in terms of Mbps.
4836 lpfc_sli_port_speed_get(struct lpfc_hba *phba)
4838 uint32_t link_speed;
4840 if (!lpfc_is_link_up(phba))
4843 if (phba->sli_rev <= LPFC_SLI_REV3) {
4844 switch (phba->fc_linkspeed) {
4845 case LPFC_LINK_SPEED_1GHZ:
4848 case LPFC_LINK_SPEED_2GHZ:
4851 case LPFC_LINK_SPEED_4GHZ:
4854 case LPFC_LINK_SPEED_8GHZ:
4857 case LPFC_LINK_SPEED_10GHZ:
4860 case LPFC_LINK_SPEED_16GHZ:
4867 if (phba->sli4_hba.link_state.logical_speed)
4869 phba->sli4_hba.link_state.logical_speed;
4871 link_speed = phba->sli4_hba.link_state.speed;
4877 * lpfc_sli4_port_speed_parse - Parse async evt link speed code to link speed
4878 * @phba: pointer to lpfc hba data structure.
4879 * @evt_code: asynchronous event code.
4880 * @speed_code: asynchronous event link speed code.
4882 * This routine is to parse the giving SLI4 async event link speed code into
4883 * value of Mbps for the link speed.
4885 * Return: link speed in terms of Mbps.
4888 lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
4891 uint32_t port_speed;
4894 case LPFC_TRAILER_CODE_LINK:
4895 switch (speed_code) {
4896 case LPFC_ASYNC_LINK_SPEED_ZERO:
4899 case LPFC_ASYNC_LINK_SPEED_10MBPS:
4902 case LPFC_ASYNC_LINK_SPEED_100MBPS:
4905 case LPFC_ASYNC_LINK_SPEED_1GBPS:
4908 case LPFC_ASYNC_LINK_SPEED_10GBPS:
4911 case LPFC_ASYNC_LINK_SPEED_20GBPS:
4914 case LPFC_ASYNC_LINK_SPEED_25GBPS:
4917 case LPFC_ASYNC_LINK_SPEED_40GBPS:
4920 case LPFC_ASYNC_LINK_SPEED_100GBPS:
4921 port_speed = 100000;
4927 case LPFC_TRAILER_CODE_FC:
4928 switch (speed_code) {
4929 case LPFC_FC_LA_SPEED_UNKNOWN:
4932 case LPFC_FC_LA_SPEED_1G:
4935 case LPFC_FC_LA_SPEED_2G:
4938 case LPFC_FC_LA_SPEED_4G:
4941 case LPFC_FC_LA_SPEED_8G:
4944 case LPFC_FC_LA_SPEED_10G:
4947 case LPFC_FC_LA_SPEED_16G:
4950 case LPFC_FC_LA_SPEED_32G:
4953 case LPFC_FC_LA_SPEED_64G:
4956 case LPFC_FC_LA_SPEED_128G:
4957 port_speed = 128000;
4970 * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
4971 * @phba: pointer to lpfc hba data structure.
4972 * @acqe_link: pointer to the async link completion queue entry.
4974 * This routine is to handle the SLI4 asynchronous FCoE link event.
4977 lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
4978 struct lpfc_acqe_link *acqe_link)
4980 struct lpfc_dmabuf *mp;
4983 struct lpfc_mbx_read_top *la;
4987 att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
4988 if (att_type != LPFC_ATT_LINK_DOWN && att_type != LPFC_ATT_LINK_UP)
4990 phba->fcoe_eventtag = acqe_link->event_tag;
4991 pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4993 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
4994 "0395 The mboxq allocation failed\n");
4997 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
4999 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5000 "0396 The lpfc_dmabuf allocation failed\n");
5003 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
5005 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5006 "0397 The mbuf allocation failed\n");
5007 goto out_free_dmabuf;
5010 /* Cleanup any outstanding ELS commands */
5011 lpfc_els_flush_all_cmd(phba);
5013 /* Block ELS IOCBs until we have done process link event */
5014 phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT;
5016 /* Update link event statistics */
5017 phba->sli.slistat.link_event++;
5019 /* Create lpfc_handle_latt mailbox command from link ACQE */
5020 lpfc_read_topology(phba, pmb, mp);
5021 pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
5022 pmb->vport = phba->pport;
5024 /* Keep the link status for extra SLI4 state machine reference */
5025 phba->sli4_hba.link_state.speed =
5026 lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_LINK,
5027 bf_get(lpfc_acqe_link_speed, acqe_link));
5028 phba->sli4_hba.link_state.duplex =
5029 bf_get(lpfc_acqe_link_duplex, acqe_link);
5030 phba->sli4_hba.link_state.status =
5031 bf_get(lpfc_acqe_link_status, acqe_link);
5032 phba->sli4_hba.link_state.type =
5033 bf_get(lpfc_acqe_link_type, acqe_link);
5034 phba->sli4_hba.link_state.number =
5035 bf_get(lpfc_acqe_link_number, acqe_link);
5036 phba->sli4_hba.link_state.fault =
5037 bf_get(lpfc_acqe_link_fault, acqe_link);
5038 phba->sli4_hba.link_state.logical_speed =
5039 bf_get(lpfc_acqe_logical_link_speed, acqe_link) * 10;
5041 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5042 "2900 Async FC/FCoE Link event - Speed:%dGBit "
5043 "duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
5044 "Logical speed:%dMbps Fault:%d\n",
5045 phba->sli4_hba.link_state.speed,
5046 phba->sli4_hba.link_state.topology,
5047 phba->sli4_hba.link_state.status,
5048 phba->sli4_hba.link_state.type,
5049 phba->sli4_hba.link_state.number,
5050 phba->sli4_hba.link_state.logical_speed,
5051 phba->sli4_hba.link_state.fault);
5053 * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
5054 * topology info. Note: Optional for non FC-AL ports.
5056 if (!(phba->hba_flag & HBA_FCOE_MODE)) {
5057 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
5058 if (rc == MBX_NOT_FINISHED)
5059 goto out_free_dmabuf;
5063 * For FCoE Mode: fill in all the topology information we need and call
5064 * the READ_TOPOLOGY completion routine to continue without actually
5065 * sending the READ_TOPOLOGY mailbox command to the port.
5067 /* Initialize completion status */
5069 mb->mbxStatus = MBX_SUCCESS;
5071 /* Parse port fault information field */
5072 lpfc_sli4_parse_latt_fault(phba, acqe_link);
5074 /* Parse and translate link attention fields */
5075 la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
5076 la->eventTag = acqe_link->event_tag;
5077 bf_set(lpfc_mbx_read_top_att_type, la, att_type);
5078 bf_set(lpfc_mbx_read_top_link_spd, la,
5079 (bf_get(lpfc_acqe_link_speed, acqe_link)));
5081 /* Fake the the following irrelvant fields */
5082 bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
5083 bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
5084 bf_set(lpfc_mbx_read_top_il, la, 0);
5085 bf_set(lpfc_mbx_read_top_pb, la, 0);
5086 bf_set(lpfc_mbx_read_top_fa, la, 0);
5087 bf_set(lpfc_mbx_read_top_mm, la, 0);
5089 /* Invoke the lpfc_handle_latt mailbox command callback function */
5090 lpfc_mbx_cmpl_read_topology(phba, pmb);
5097 mempool_free(pmb, phba->mbox_mem_pool);
5101 * lpfc_async_link_speed_to_read_top - Parse async evt link speed code to read
5103 * @phba: pointer to lpfc hba data structure.
5104 * @speed_code: asynchronous event link speed code.
5106 * This routine is to parse the giving SLI4 async event link speed code into
5107 * value of Read topology link speed.
5109 * Return: link speed in terms of Read topology.
5112 lpfc_async_link_speed_to_read_top(struct lpfc_hba *phba, uint8_t speed_code)
5116 switch (speed_code) {
5117 case LPFC_FC_LA_SPEED_1G:
5118 port_speed = LPFC_LINK_SPEED_1GHZ;
5120 case LPFC_FC_LA_SPEED_2G:
5121 port_speed = LPFC_LINK_SPEED_2GHZ;
5123 case LPFC_FC_LA_SPEED_4G:
5124 port_speed = LPFC_LINK_SPEED_4GHZ;
5126 case LPFC_FC_LA_SPEED_8G:
5127 port_speed = LPFC_LINK_SPEED_8GHZ;
5129 case LPFC_FC_LA_SPEED_16G:
5130 port_speed = LPFC_LINK_SPEED_16GHZ;
5132 case LPFC_FC_LA_SPEED_32G:
5133 port_speed = LPFC_LINK_SPEED_32GHZ;
5135 case LPFC_FC_LA_SPEED_64G:
5136 port_speed = LPFC_LINK_SPEED_64GHZ;
5138 case LPFC_FC_LA_SPEED_128G:
5139 port_speed = LPFC_LINK_SPEED_128GHZ;
5141 case LPFC_FC_LA_SPEED_256G:
5142 port_speed = LPFC_LINK_SPEED_256GHZ;
5152 #define trunk_link_status(__idx)\
5153 bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
5154 ((phba->trunk_link.link##__idx.state == LPFC_LINK_UP) ?\
5155 "Link up" : "Link down") : "NA"
5156 /* Did port __idx reported an error */
5157 #define trunk_port_fault(__idx)\
5158 bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
5159 (port_fault & (1 << __idx) ? "YES" : "NO") : "NA"
5162 lpfc_update_trunk_link_status(struct lpfc_hba *phba,
5163 struct lpfc_acqe_fc_la *acqe_fc)
5165 uint8_t port_fault = bf_get(lpfc_acqe_fc_la_trunk_linkmask, acqe_fc);
5166 uint8_t err = bf_get(lpfc_acqe_fc_la_trunk_fault, acqe_fc);
5168 phba->sli4_hba.link_state.speed =
5169 lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
5170 bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
5172 phba->sli4_hba.link_state.logical_speed =
5173 bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
5174 /* We got FC link speed, convert to fc_linkspeed (READ_TOPOLOGY) */
5175 phba->fc_linkspeed =
5176 lpfc_async_link_speed_to_read_top(
5178 bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
5180 if (bf_get(lpfc_acqe_fc_la_trunk_config_port0, acqe_fc)) {
5181 phba->trunk_link.link0.state =
5182 bf_get(lpfc_acqe_fc_la_trunk_link_status_port0, acqe_fc)
5183 ? LPFC_LINK_UP : LPFC_LINK_DOWN;
5184 phba->trunk_link.link0.fault = port_fault & 0x1 ? err : 0;
5186 if (bf_get(lpfc_acqe_fc_la_trunk_config_port1, acqe_fc)) {
5187 phba->trunk_link.link1.state =
5188 bf_get(lpfc_acqe_fc_la_trunk_link_status_port1, acqe_fc)
5189 ? LPFC_LINK_UP : LPFC_LINK_DOWN;
5190 phba->trunk_link.link1.fault = port_fault & 0x2 ? err : 0;
5192 if (bf_get(lpfc_acqe_fc_la_trunk_config_port2, acqe_fc)) {
5193 phba->trunk_link.link2.state =
5194 bf_get(lpfc_acqe_fc_la_trunk_link_status_port2, acqe_fc)
5195 ? LPFC_LINK_UP : LPFC_LINK_DOWN;
5196 phba->trunk_link.link2.fault = port_fault & 0x4 ? err : 0;
5198 if (bf_get(lpfc_acqe_fc_la_trunk_config_port3, acqe_fc)) {
5199 phba->trunk_link.link3.state =
5200 bf_get(lpfc_acqe_fc_la_trunk_link_status_port3, acqe_fc)
5201 ? LPFC_LINK_UP : LPFC_LINK_DOWN;
5202 phba->trunk_link.link3.fault = port_fault & 0x8 ? err : 0;
5205 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5206 "2910 Async FC Trunking Event - Speed:%d\n"
5207 "\tLogical speed:%d "
5208 "port0: %s port1: %s port2: %s port3: %s\n",
5209 phba->sli4_hba.link_state.speed,
5210 phba->sli4_hba.link_state.logical_speed,
5211 trunk_link_status(0), trunk_link_status(1),
5212 trunk_link_status(2), trunk_link_status(3));
5215 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5216 "3202 trunk error:0x%x (%s) seen on port0:%s "
5218 * SLI-4: We have only 0xA error codes
5219 * defined as of now. print an appropriate
5220 * message in case driver needs to be updated.
5222 "port1:%s port2:%s port3:%s\n", err, err > 0xA ?
5223 "UNDEFINED. update driver." : trunk_errmsg[err],
5224 trunk_port_fault(0), trunk_port_fault(1),
5225 trunk_port_fault(2), trunk_port_fault(3));
5230 * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event
5231 * @phba: pointer to lpfc hba data structure.
5232 * @acqe_fc: pointer to the async fc completion queue entry.
5234 * This routine is to handle the SLI4 asynchronous FC event. It will simply log
5235 * that the event was received and then issue a read_topology mailbox command so
5236 * that the rest of the driver will treat it the same as SLI3.
5239 lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
5241 struct lpfc_dmabuf *mp;
5244 struct lpfc_mbx_read_top *la;
5247 if (bf_get(lpfc_trailer_type, acqe_fc) !=
5248 LPFC_FC_LA_EVENT_TYPE_FC_LINK) {
5249 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5250 "2895 Non FC link Event detected.(%d)\n",
5251 bf_get(lpfc_trailer_type, acqe_fc));
5255 if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
5256 LPFC_FC_LA_TYPE_TRUNKING_EVENT) {
5257 lpfc_update_trunk_link_status(phba, acqe_fc);
5261 /* Keep the link status for extra SLI4 state machine reference */
5262 phba->sli4_hba.link_state.speed =
5263 lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
5264 bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
5265 phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL;
5266 phba->sli4_hba.link_state.topology =
5267 bf_get(lpfc_acqe_fc_la_topology, acqe_fc);
5268 phba->sli4_hba.link_state.status =
5269 bf_get(lpfc_acqe_fc_la_att_type, acqe_fc);
5270 phba->sli4_hba.link_state.type =
5271 bf_get(lpfc_acqe_fc_la_port_type, acqe_fc);
5272 phba->sli4_hba.link_state.number =
5273 bf_get(lpfc_acqe_fc_la_port_number, acqe_fc);
5274 phba->sli4_hba.link_state.fault =
5275 bf_get(lpfc_acqe_link_fault, acqe_fc);
5277 if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
5278 LPFC_FC_LA_TYPE_LINK_DOWN)
5279 phba->sli4_hba.link_state.logical_speed = 0;
5280 else if (!phba->sli4_hba.conf_trunk)
5281 phba->sli4_hba.link_state.logical_speed =
5282 bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
5284 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5285 "2896 Async FC event - Speed:%dGBaud Topology:x%x "
5286 "LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
5287 "%dMbps Fault:%d\n",
5288 phba->sli4_hba.link_state.speed,
5289 phba->sli4_hba.link_state.topology,
5290 phba->sli4_hba.link_state.status,
5291 phba->sli4_hba.link_state.type,
5292 phba->sli4_hba.link_state.number,
5293 phba->sli4_hba.link_state.logical_speed,
5294 phba->sli4_hba.link_state.fault);
5295 pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5297 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5298 "2897 The mboxq allocation failed\n");
5301 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
5303 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5304 "2898 The lpfc_dmabuf allocation failed\n");
5307 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
5309 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5310 "2899 The mbuf allocation failed\n");
5311 goto out_free_dmabuf;
5314 /* Cleanup any outstanding ELS commands */
5315 lpfc_els_flush_all_cmd(phba);
5317 /* Block ELS IOCBs until we have done process link event */
5318 phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT;
5320 /* Update link event statistics */
5321 phba->sli.slistat.link_event++;
5323 /* Create lpfc_handle_latt mailbox command from link ACQE */
5324 lpfc_read_topology(phba, pmb, mp);
5325 pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
5326 pmb->vport = phba->pport;
5328 if (phba->sli4_hba.link_state.status != LPFC_FC_LA_TYPE_LINK_UP) {
5329 phba->link_flag &= ~(LS_MDS_LINK_DOWN | LS_MDS_LOOPBACK);
5331 switch (phba->sli4_hba.link_state.status) {
5332 case LPFC_FC_LA_TYPE_MDS_LINK_DOWN:
5333 phba->link_flag |= LS_MDS_LINK_DOWN;
5335 case LPFC_FC_LA_TYPE_MDS_LOOPBACK:
5336 phba->link_flag |= LS_MDS_LOOPBACK;
5342 /* Initialize completion status */
5344 mb->mbxStatus = MBX_SUCCESS;
5346 /* Parse port fault information field */
5347 lpfc_sli4_parse_latt_fault(phba, (void *)acqe_fc);
5349 /* Parse and translate link attention fields */
5350 la = (struct lpfc_mbx_read_top *)&pmb->u.mb.un.varReadTop;
5351 la->eventTag = acqe_fc->event_tag;
5353 if (phba->sli4_hba.link_state.status ==
5354 LPFC_FC_LA_TYPE_UNEXP_WWPN) {
5355 bf_set(lpfc_mbx_read_top_att_type, la,
5356 LPFC_FC_LA_TYPE_UNEXP_WWPN);
5358 bf_set(lpfc_mbx_read_top_att_type, la,
5359 LPFC_FC_LA_TYPE_LINK_DOWN);
5361 /* Invoke the mailbox command callback function */
5362 lpfc_mbx_cmpl_read_topology(phba, pmb);
5367 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
5368 if (rc == MBX_NOT_FINISHED)
5369 goto out_free_dmabuf;
5375 mempool_free(pmb, phba->mbox_mem_pool);
5379 * lpfc_sli4_async_sli_evt - Process the asynchronous SLI link event
5380 * @phba: pointer to lpfc hba data structure.
5381 * @acqe_sli: pointer to the async SLI completion queue entry.
5383 * This routine is to handle the SLI4 asynchronous SLI events.
5386 lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
5392 uint8_t operational = 0;
5393 struct temp_event temp_event_data;
5394 struct lpfc_acqe_misconfigured_event *misconfigured;
5395 struct Scsi_Host *shost;
5396 struct lpfc_vport **vports;
5399 evt_type = bf_get(lpfc_trailer_type, acqe_sli);
5401 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5402 "2901 Async SLI event - Type:%d, Event Data: x%08x "
5403 "x%08x x%08x x%08x\n", evt_type,
5404 acqe_sli->event_data1, acqe_sli->event_data2,
5405 acqe_sli->reserved, acqe_sli->trailer);
5407 port_name = phba->Port[0];
5408 if (port_name == 0x00)
5409 port_name = '?'; /* get port name is empty */
5412 case LPFC_SLI_EVENT_TYPE_OVER_TEMP:
5413 temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
5414 temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
5415 temp_event_data.data = (uint32_t)acqe_sli->event_data1;
5417 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
5418 "3190 Over Temperature:%d Celsius- Port Name %c\n",
5419 acqe_sli->event_data1, port_name);
5421 phba->sfp_warning |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE;
5422 shost = lpfc_shost_from_vport(phba->pport);
5423 fc_host_post_vendor_event(shost, fc_get_event_number(),
5424 sizeof(temp_event_data),
5425 (char *)&temp_event_data,
5426 SCSI_NL_VID_TYPE_PCI
5427 | PCI_VENDOR_ID_EMULEX);
5429 case LPFC_SLI_EVENT_TYPE_NORM_TEMP:
5430 temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
5431 temp_event_data.event_code = LPFC_NORMAL_TEMP;
5432 temp_event_data.data = (uint32_t)acqe_sli->event_data1;
5434 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5435 "3191 Normal Temperature:%d Celsius - Port Name %c\n",
5436 acqe_sli->event_data1, port_name);
5438 shost = lpfc_shost_from_vport(phba->pport);
5439 fc_host_post_vendor_event(shost, fc_get_event_number(),
5440 sizeof(temp_event_data),
5441 (char *)&temp_event_data,
5442 SCSI_NL_VID_TYPE_PCI
5443 | PCI_VENDOR_ID_EMULEX);
5445 case LPFC_SLI_EVENT_TYPE_MISCONFIGURED:
5446 misconfigured = (struct lpfc_acqe_misconfigured_event *)
5447 &acqe_sli->event_data1;
5449 /* fetch the status for this port */
5450 switch (phba->sli4_hba.lnk_info.lnk_no) {
5451 case LPFC_LINK_NUMBER_0:
5452 status = bf_get(lpfc_sli_misconfigured_port0_state,
5453 &misconfigured->theEvent);
5454 operational = bf_get(lpfc_sli_misconfigured_port0_op,
5455 &misconfigured->theEvent);
5457 case LPFC_LINK_NUMBER_1:
5458 status = bf_get(lpfc_sli_misconfigured_port1_state,
5459 &misconfigured->theEvent);
5460 operational = bf_get(lpfc_sli_misconfigured_port1_op,
5461 &misconfigured->theEvent);
5463 case LPFC_LINK_NUMBER_2:
5464 status = bf_get(lpfc_sli_misconfigured_port2_state,
5465 &misconfigured->theEvent);
5466 operational = bf_get(lpfc_sli_misconfigured_port2_op,
5467 &misconfigured->theEvent);
5469 case LPFC_LINK_NUMBER_3:
5470 status = bf_get(lpfc_sli_misconfigured_port3_state,
5471 &misconfigured->theEvent);
5472 operational = bf_get(lpfc_sli_misconfigured_port3_op,
5473 &misconfigured->theEvent);
5476 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5478 "LPFC_SLI_EVENT_TYPE_MISCONFIGURED "
5479 "event: Invalid link %d",
5480 phba->sli4_hba.lnk_info.lnk_no);
5484 /* Skip if optic state unchanged */
5485 if (phba->sli4_hba.lnk_info.optic_state == status)
5489 case LPFC_SLI_EVENT_STATUS_VALID:
5490 sprintf(message, "Physical Link is functional");
5492 case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
5493 sprintf(message, "Optics faulted/incorrectly "
5494 "installed/not installed - Reseat optics, "
5495 "if issue not resolved, replace.");
5497 case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
5499 "Optics of two types installed - Remove one "
5500 "optic or install matching pair of optics.");
5502 case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
5503 sprintf(message, "Incompatible optics - Replace with "
5504 "compatible optics for card to function.");
5506 case LPFC_SLI_EVENT_STATUS_UNQUALIFIED:
5507 sprintf(message, "Unqualified optics - Replace with "
5508 "Avago optics for Warranty and Technical "
5509 "Support - Link is%s operational",
5510 (operational) ? " not" : "");
5512 case LPFC_SLI_EVENT_STATUS_UNCERTIFIED:
5513 sprintf(message, "Uncertified optics - Replace with "
5514 "Avago-certified optics to enable link "
5515 "operation - Link is%s operational",
5516 (operational) ? " not" : "");
5519 /* firmware is reporting a status we don't know about */
5520 sprintf(message, "Unknown event status x%02x", status);
5524 /* Issue READ_CONFIG mbox command to refresh supported speeds */
5525 rc = lpfc_sli4_read_config(phba);
5528 lpfc_printf_log(phba, KERN_ERR,
5530 "3194 Unable to retrieve supported "
5531 "speeds, rc = 0x%x\n", rc);
5533 vports = lpfc_create_vport_work_array(phba);
5534 if (vports != NULL) {
5535 for (i = 0; i <= phba->max_vports && vports[i] != NULL;
5537 shost = lpfc_shost_from_vport(vports[i]);
5538 lpfc_host_supported_speeds_set(shost);
5541 lpfc_destroy_vport_work_array(phba, vports);
5543 phba->sli4_hba.lnk_info.optic_state = status;
5544 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
5545 "3176 Port Name %c %s\n", port_name, message);
5547 case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
5548 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5549 "3192 Remote DPort Test Initiated - "
5550 "Event Data1:x%08x Event Data2: x%08x\n",
5551 acqe_sli->event_data1, acqe_sli->event_data2);
5553 case LPFC_SLI_EVENT_TYPE_MISCONF_FAWWN:
5554 /* Misconfigured WWN. Reports that the SLI Port is configured
5555 * to use FA-WWN, but the attached device doesn’t support it.
5556 * No driver action is required.
5557 * Event Data1 - N.A, Event Data2 - N.A
5559 lpfc_log_msg(phba, KERN_WARNING, LOG_SLI,
5560 "2699 Misconfigured FA-WWN - Attached device does "
5561 "not support FA-WWN\n");
5563 case LPFC_SLI_EVENT_TYPE_EEPROM_FAILURE:
5564 /* EEPROM failure. No driver action is required */
5565 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
5566 "2518 EEPROM failure - "
5567 "Event Data1: x%08x Event Data2: x%08x\n",
5568 acqe_sli->event_data1, acqe_sli->event_data2);
5571 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5572 "3193 Unrecognized SLI event, type: 0x%x",
5579 * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport
5580 * @vport: pointer to vport data structure.
5582 * This routine is to perform Clear Virtual Link (CVL) on a vport in
5583 * response to a CVL event.
5585 * Return the pointer to the ndlp with the vport if successful, otherwise
5588 static struct lpfc_nodelist *
5589 lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
5591 struct lpfc_nodelist *ndlp;
5592 struct Scsi_Host *shost;
5593 struct lpfc_hba *phba;
5600 ndlp = lpfc_findnode_did(vport, Fabric_DID);
5602 /* Cannot find existing Fabric ndlp, so allocate a new one */
5603 ndlp = lpfc_nlp_init(vport, Fabric_DID);
5606 /* Set the node type */
5607 ndlp->nlp_type |= NLP_FABRIC;
5608 /* Put ndlp onto node list */
5609 lpfc_enqueue_node(vport, ndlp);
5610 } else if (!NLP_CHK_NODE_ACT(ndlp)) {
5611 /* re-setup ndlp without removing from node list */
5612 ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
5616 if ((phba->pport->port_state < LPFC_FLOGI) &&
5617 (phba->pport->port_state != LPFC_VPORT_FAILED))
5619 /* If virtual link is not yet instantiated ignore CVL */
5620 if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC)
5621 && (vport->port_state != LPFC_VPORT_FAILED))
5623 shost = lpfc_shost_from_vport(vport);
5626 lpfc_linkdown_port(vport);
5627 lpfc_cleanup_pending_mbox(vport);
5628 spin_lock_irq(shost->host_lock);
5629 vport->fc_flag |= FC_VPORT_CVL_RCVD;
5630 spin_unlock_irq(shost->host_lock);
5636 * lpfc_sli4_perform_all_vport_cvl - Perform clear virtual link on all vports
5637 * @phba: pointer to lpfc hba data structure.
5639 * This routine is to perform Clear Virtual Link (CVL) on all vports in
5640 * response to a FCF dead event.
5643 lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba *phba)
5645 struct lpfc_vport **vports;
5648 vports = lpfc_create_vport_work_array(phba);
5650 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
5651 lpfc_sli4_perform_vport_cvl(vports[i]);
5652 lpfc_destroy_vport_work_array(phba, vports);
5656 * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event
5657 * @phba: pointer to lpfc hba data structure.
5658 * @acqe_fip: pointer to the async fcoe completion queue entry.
5660 * This routine is to handle the SLI4 asynchronous fcoe event.
5663 lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
5664 struct lpfc_acqe_fip *acqe_fip)
5666 uint8_t event_type = bf_get(lpfc_trailer_type, acqe_fip);
5668 struct lpfc_vport *vport;
5669 struct lpfc_nodelist *ndlp;
5670 struct Scsi_Host *shost;
5671 int active_vlink_present;
5672 struct lpfc_vport **vports;
5675 phba->fc_eventTag = acqe_fip->event_tag;
5676 phba->fcoe_eventtag = acqe_fip->event_tag;
5677 switch (event_type) {
5678 case LPFC_FIP_EVENT_TYPE_NEW_FCF:
5679 case LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD:
5680 if (event_type == LPFC_FIP_EVENT_TYPE_NEW_FCF)
5681 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5682 "2546 New FCF event, evt_tag:x%x, "
5684 acqe_fip->event_tag,
5687 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP |
5689 "2788 FCF param modified event, "
5690 "evt_tag:x%x, index:x%x\n",
5691 acqe_fip->event_tag,
5693 if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
5695 * During period of FCF discovery, read the FCF
5696 * table record indexed by the event to update
5697 * FCF roundrobin failover eligible FCF bmask.
5699 lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
5701 "2779 Read FCF (x%x) for updating "
5702 "roundrobin FCF failover bmask\n",
5704 rc = lpfc_sli4_read_fcf_rec(phba, acqe_fip->index);
5707 /* If the FCF discovery is in progress, do nothing. */
5708 spin_lock_irq(&phba->hbalock);
5709 if (phba->hba_flag & FCF_TS_INPROG) {
5710 spin_unlock_irq(&phba->hbalock);
5713 /* If fast FCF failover rescan event is pending, do nothing */
5714 if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) {
5715 spin_unlock_irq(&phba->hbalock);
5719 /* If the FCF has been in discovered state, do nothing. */
5720 if (phba->fcf.fcf_flag & FCF_SCAN_DONE) {
5721 spin_unlock_irq(&phba->hbalock);
5724 spin_unlock_irq(&phba->hbalock);
5726 /* Otherwise, scan the entire FCF table and re-discover SAN */
5727 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
5728 "2770 Start FCF table scan per async FCF "
5729 "event, evt_tag:x%x, index:x%x\n",
5730 acqe_fip->event_tag, acqe_fip->index);
5731 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
5732 LPFC_FCOE_FCF_GET_FIRST);
5734 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5735 "2547 Issue FCF scan read FCF mailbox "
5736 "command failed (x%x)\n", rc);
5739 case LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL:
5740 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5741 "2548 FCF Table full count 0x%x tag 0x%x\n",
5742 bf_get(lpfc_acqe_fip_fcf_count, acqe_fip),
5743 acqe_fip->event_tag);
5746 case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
5747 phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
5748 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5749 "2549 FCF (x%x) disconnected from network, "
5750 "tag:x%x\n", acqe_fip->index,
5751 acqe_fip->event_tag);
5753 * If we are in the middle of FCF failover process, clear
5754 * the corresponding FCF bit in the roundrobin bitmap.
5756 spin_lock_irq(&phba->hbalock);
5757 if ((phba->fcf.fcf_flag & FCF_DISCOVERY) &&
5758 (phba->fcf.current_rec.fcf_indx != acqe_fip->index)) {
5759 spin_unlock_irq(&phba->hbalock);
5760 /* Update FLOGI FCF failover eligible FCF bmask */
5761 lpfc_sli4_fcf_rr_index_clear(phba, acqe_fip->index);
5764 spin_unlock_irq(&phba->hbalock);
5766 /* If the event is not for currently used fcf do nothing */
5767 if (phba->fcf.current_rec.fcf_indx != acqe_fip->index)
5771 * Otherwise, request the port to rediscover the entire FCF
5772 * table for a fast recovery from case that the current FCF
5773 * is no longer valid as we are not in the middle of FCF
5774 * failover process already.
5776 spin_lock_irq(&phba->hbalock);
5777 /* Mark the fast failover process in progress */
5778 phba->fcf.fcf_flag |= FCF_DEAD_DISC;
5779 spin_unlock_irq(&phba->hbalock);
5781 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
5782 "2771 Start FCF fast failover process due to "
5783 "FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
5784 "\n", acqe_fip->event_tag, acqe_fip->index);
5785 rc = lpfc_sli4_redisc_fcf_table(phba);
5787 lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
5789 "2772 Issue FCF rediscover mailbox "
5790 "command failed, fail through to FCF "
5792 spin_lock_irq(&phba->hbalock);
5793 phba->fcf.fcf_flag &= ~FCF_DEAD_DISC;
5794 spin_unlock_irq(&phba->hbalock);
5796 * Last resort will fail over by treating this
5797 * as a link down to FCF registration.
5799 lpfc_sli4_fcf_dead_failthrough(phba);
5801 /* Reset FCF roundrobin bmask for new discovery */
5802 lpfc_sli4_clear_fcf_rr_bmask(phba);
5804 * Handling fast FCF failover to a DEAD FCF event is
5805 * considered equalivant to receiving CVL to all vports.
5807 lpfc_sli4_perform_all_vport_cvl(phba);
5810 case LPFC_FIP_EVENT_TYPE_CVL:
5811 phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
5812 lpfc_printf_log(phba, KERN_ERR,
5814 "2718 Clear Virtual Link Received for VPI 0x%x"
5815 " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
5817 vport = lpfc_find_vport_by_vpid(phba,
5819 ndlp = lpfc_sli4_perform_vport_cvl(vport);
5822 active_vlink_present = 0;
5824 vports = lpfc_create_vport_work_array(phba);
5826 for (i = 0; i <= phba->max_vports && vports[i] != NULL;
5828 if ((!(vports[i]->fc_flag &
5829 FC_VPORT_CVL_RCVD)) &&
5830 (vports[i]->port_state > LPFC_FDISC)) {
5831 active_vlink_present = 1;
5835 lpfc_destroy_vport_work_array(phba, vports);
5839 * Don't re-instantiate if vport is marked for deletion.
5840 * If we are here first then vport_delete is going to wait
5841 * for discovery to complete.
5843 if (!(vport->load_flag & FC_UNLOADING) &&
5844 active_vlink_present) {
5846 * If there are other active VLinks present,
5847 * re-instantiate the Vlink using FDISC.
5849 mod_timer(&ndlp->nlp_delayfunc,
5850 jiffies + msecs_to_jiffies(1000));
5851 shost = lpfc_shost_from_vport(vport);
5852 spin_lock_irq(shost->host_lock);
5853 ndlp->nlp_flag |= NLP_DELAY_TMO;
5854 spin_unlock_irq(shost->host_lock);
5855 ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
5856 vport->port_state = LPFC_FDISC;
5859 * Otherwise, we request port to rediscover
5860 * the entire FCF table for a fast recovery
5861 * from possible case that the current FCF
5862 * is no longer valid if we are not already
5863 * in the FCF failover process.
5865 spin_lock_irq(&phba->hbalock);
5866 if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
5867 spin_unlock_irq(&phba->hbalock);
5870 /* Mark the fast failover process in progress */
5871 phba->fcf.fcf_flag |= FCF_ACVL_DISC;
5872 spin_unlock_irq(&phba->hbalock);
5873 lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
5875 "2773 Start FCF failover per CVL, "
5876 "evt_tag:x%x\n", acqe_fip->event_tag);
5877 rc = lpfc_sli4_redisc_fcf_table(phba);
5879 lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
5881 "2774 Issue FCF rediscover "
5882 "mailbox command failed, "
5883 "through to CVL event\n");
5884 spin_lock_irq(&phba->hbalock);
5885 phba->fcf.fcf_flag &= ~FCF_ACVL_DISC;
5886 spin_unlock_irq(&phba->hbalock);
5888 * Last resort will be re-try on the
5889 * the current registered FCF entry.
5891 lpfc_retry_pport_discovery(phba);
5894 * Reset FCF roundrobin bmask for new
5897 lpfc_sli4_clear_fcf_rr_bmask(phba);
5901 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5902 "0288 Unknown FCoE event type 0x%x event tag "
5903 "0x%x\n", event_type, acqe_fip->event_tag);
5909 * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
5910 * @phba: pointer to lpfc hba data structure.
5911 * @acqe_dcbx: pointer to the async dcbx completion queue entry.
5913 * This routine is to handle the SLI4 asynchronous dcbx event.
5916 lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
5917 struct lpfc_acqe_dcbx *acqe_dcbx)
5919 phba->fc_eventTag = acqe_dcbx->event_tag;
5920 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
5921 "0290 The SLI4 DCBX asynchronous event is not "
5926 * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event
5927 * @phba: pointer to lpfc hba data structure.
5928 * @acqe_grp5: pointer to the async grp5 completion queue entry.
5930 * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event
5931 * is an asynchronous notified of a logical link speed change. The Port
5932 * reports the logical link speed in units of 10Mbps.
5935 lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba,
5936 struct lpfc_acqe_grp5 *acqe_grp5)
5938 uint16_t prev_ll_spd;
5940 phba->fc_eventTag = acqe_grp5->event_tag;
5941 phba->fcoe_eventtag = acqe_grp5->event_tag;
5942 prev_ll_spd = phba->sli4_hba.link_state.logical_speed;
5943 phba->sli4_hba.link_state.logical_speed =
5944 (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)) * 10;
5945 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
5946 "2789 GRP5 Async Event: Updating logical link speed "
5947 "from %dMbps to %dMbps\n", prev_ll_spd,
5948 phba->sli4_hba.link_state.logical_speed);
5952 * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
5953 * @phba: pointer to lpfc hba data structure.
5955 * This routine is invoked by the worker thread to process all the pending
5956 * SLI4 asynchronous events.
5958 void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
5960 struct lpfc_cq_event *cq_event;
5962 /* First, declare the async event has been handled */
5963 spin_lock_irq(&phba->hbalock);
5964 phba->hba_flag &= ~ASYNC_EVENT;
5965 spin_unlock_irq(&phba->hbalock);
5966 /* Now, handle all the async events */
5967 while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
5968 /* Get the first event from the head of the event queue */
5969 spin_lock_irq(&phba->hbalock);
5970 list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
5971 cq_event, struct lpfc_cq_event, list);
5972 spin_unlock_irq(&phba->hbalock);
5973 /* Process the asynchronous event */
5974 switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
5975 case LPFC_TRAILER_CODE_LINK:
5976 lpfc_sli4_async_link_evt(phba,
5977 &cq_event->cqe.acqe_link);
5979 case LPFC_TRAILER_CODE_FCOE:
5980 lpfc_sli4_async_fip_evt(phba, &cq_event->cqe.acqe_fip);
5982 case LPFC_TRAILER_CODE_DCBX:
5983 lpfc_sli4_async_dcbx_evt(phba,
5984 &cq_event->cqe.acqe_dcbx);
5986 case LPFC_TRAILER_CODE_GRP5:
5987 lpfc_sli4_async_grp5_evt(phba,
5988 &cq_event->cqe.acqe_grp5);
5990 case LPFC_TRAILER_CODE_FC:
5991 lpfc_sli4_async_fc_evt(phba, &cq_event->cqe.acqe_fc);
5993 case LPFC_TRAILER_CODE_SLI:
5994 lpfc_sli4_async_sli_evt(phba, &cq_event->cqe.acqe_sli);
5997 lpfc_printf_log(phba, KERN_ERR,
5999 "1804 Invalid asynchronous event code: "
6000 "x%x\n", bf_get(lpfc_trailer_code,
6001 &cq_event->cqe.mcqe_cmpl));
6004 /* Free the completion event processed to the free pool */
6005 lpfc_sli4_cq_event_release(phba, cq_event);
6010 * lpfc_sli4_fcf_redisc_event_proc - Process fcf table rediscovery event
6011 * @phba: pointer to lpfc hba data structure.
6013 * This routine is invoked by the worker thread to process FCF table
6014 * rediscovery pending completion event.
6016 void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *phba)
6020 spin_lock_irq(&phba->hbalock);
6021 /* Clear FCF rediscovery timeout event */
6022 phba->fcf.fcf_flag &= ~FCF_REDISC_EVT;
6023 /* Clear driver fast failover FCF record flag */
6024 phba->fcf.failover_rec.flag = 0;
6025 /* Set state for FCF fast failover */
6026 phba->fcf.fcf_flag |= FCF_REDISC_FOV;
6027 spin_unlock_irq(&phba->hbalock);
6029 /* Scan FCF table from the first entry to re-discover SAN */
6030 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
6031 "2777 Start post-quiescent FCF table scan\n");
6032 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
6034 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6035 "2747 Issue FCF scan read FCF mailbox "
6036 "command failed 0x%x\n", rc);
6040 * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
6041 * @phba: pointer to lpfc hba data structure.
6042 * @dev_grp: The HBA PCI-Device group number.
6044 * This routine is invoked to set up the per HBA PCI-Device group function
6045 * API jump table entries.
6047 * Return: 0 if success, otherwise -ENODEV
6050 lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
6054 /* Set up lpfc PCI-device group */
6055 phba->pci_dev_grp = dev_grp;
6057 /* The LPFC_PCI_DEV_OC uses SLI4 */
6058 if (dev_grp == LPFC_PCI_DEV_OC)
6059 phba->sli_rev = LPFC_SLI_REV4;
6061 /* Set up device INIT API function jump table */
6062 rc = lpfc_init_api_table_setup(phba, dev_grp);
6065 /* Set up SCSI API function jump table */
6066 rc = lpfc_scsi_api_table_setup(phba, dev_grp);
6069 /* Set up SLI API function jump table */
6070 rc = lpfc_sli_api_table_setup(phba, dev_grp);
6073 /* Set up MBOX API function jump table */
6074 rc = lpfc_mbox_api_table_setup(phba, dev_grp);
6082 * lpfc_log_intr_mode - Log the active interrupt mode
6083 * @phba: pointer to lpfc hba data structure.
6084 * @intr_mode: active interrupt mode adopted.
6086 * This routine it invoked to log the currently used active interrupt mode
6089 static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
6091 switch (intr_mode) {
6093 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
6094 "0470 Enable INTx interrupt mode.\n");
6097 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
6098 "0481 Enabled MSI interrupt mode.\n");
6101 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
6102 "0480 Enabled MSI-X interrupt mode.\n");
6105 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6106 "0482 Illegal interrupt mode.\n");
6113 * lpfc_enable_pci_dev - Enable a generic PCI device.
6114 * @phba: pointer to lpfc hba data structure.
6116 * This routine is invoked to enable the PCI device that is common to all
6121 * other values - error
6124 lpfc_enable_pci_dev(struct lpfc_hba *phba)
6126 struct pci_dev *pdev;
6128 /* Obtain PCI device reference */
6132 pdev = phba->pcidev;
6133 /* Enable PCI device */
6134 if (pci_enable_device_mem(pdev))
6136 /* Request PCI resource for the device */
6137 if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME))
6138 goto out_disable_device;
6139 /* Set up device as PCI master and save state for EEH */
6140 pci_set_master(pdev);
6141 pci_try_set_mwi(pdev);
6142 pci_save_state(pdev);
6144 /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
6145 if (pci_is_pcie(pdev))
6146 pdev->needs_freset = 1;
6151 pci_disable_device(pdev);
6153 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6154 "1401 Failed to enable pci device\n");
6159 * lpfc_disable_pci_dev - Disable a generic PCI device.
6160 * @phba: pointer to lpfc hba data structure.
6162 * This routine is invoked to disable the PCI device that is common to all
6166 lpfc_disable_pci_dev(struct lpfc_hba *phba)
6168 struct pci_dev *pdev;
6170 /* Obtain PCI device reference */
6174 pdev = phba->pcidev;
6175 /* Release PCI resource and disable PCI device */
6176 pci_release_mem_regions(pdev);
6177 pci_disable_device(pdev);
6183 * lpfc_reset_hba - Reset a hba
6184 * @phba: pointer to lpfc hba data structure.
6186 * This routine is invoked to reset a hba device. It brings the HBA
6187 * offline, performs a board restart, and then brings the board back
6188 * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
6189 * on outstanding mailbox commands.
6192 lpfc_reset_hba(struct lpfc_hba *phba)
6194 /* If resets are disabled then set error state and return. */
6195 if (!phba->cfg_enable_hba_reset) {
6196 phba->link_state = LPFC_HBA_ERROR;
6199 if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
6200 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
6202 lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
6204 lpfc_sli_brdrestart(phba);
6206 lpfc_unblock_mgmt_io(phba);
6210 * lpfc_sli_sriov_nr_virtfn_get - Get the number of sr-iov virtual functions
6211 * @phba: pointer to lpfc hba data structure.
6213 * This function enables the PCI SR-IOV virtual functions to a physical
6214 * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
6215 * enable the number of virtual functions to the physical function. As
6216 * not all devices support SR-IOV, the return code from the pci_enable_sriov()
6217 * API call does not considered as an error condition for most of the device.
6220 lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *phba)
6222 struct pci_dev *pdev = phba->pcidev;
6226 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
6230 pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, &nr_virtfn);
6235 * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions
6236 * @phba: pointer to lpfc hba data structure.
6237 * @nr_vfn: number of virtual functions to be enabled.
6239 * This function enables the PCI SR-IOV virtual functions to a physical
6240 * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
6241 * enable the number of virtual functions to the physical function. As
6242 * not all devices support SR-IOV, the return code from the pci_enable_sriov()
6243 * API call does not considered as an error condition for most of the device.
6246 lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn)
6248 struct pci_dev *pdev = phba->pcidev;
6249 uint16_t max_nr_vfn;
6252 max_nr_vfn = lpfc_sli_sriov_nr_virtfn_get(phba);
6253 if (nr_vfn > max_nr_vfn) {
6254 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6255 "3057 Requested vfs (%d) greater than "
6256 "supported vfs (%d)", nr_vfn, max_nr_vfn);
6260 rc = pci_enable_sriov(pdev, nr_vfn);
6262 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
6263 "2806 Failed to enable sriov on this device "
6264 "with vfn number nr_vf:%d, rc:%d\n",
6267 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
6268 "2807 Successful enable sriov on this device "
6269 "with vfn number nr_vf:%d\n", nr_vfn);
6274 * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
6275 * @phba: pointer to lpfc hba data structure.
6277 * This routine is invoked to set up the driver internal resources before the
6278 * device specific resource setup to support the HBA device it attached to.
6282 * other values - error
6285 lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
6287 struct lpfc_sli *psli = &phba->sli;
6290 * Driver resources common to all SLI revisions
6292 atomic_set(&phba->fast_event_count, 0);
6293 atomic_set(&phba->dbg_log_idx, 0);
6294 atomic_set(&phba->dbg_log_cnt, 0);
6295 atomic_set(&phba->dbg_log_dmping, 0);
6296 spin_lock_init(&phba->hbalock);
6298 /* Initialize ndlp management spinlock */
6299 spin_lock_init(&phba->ndlp_lock);
6301 /* Initialize port_list spinlock */
6302 spin_lock_init(&phba->port_list_lock);
6303 INIT_LIST_HEAD(&phba->port_list);
6305 INIT_LIST_HEAD(&phba->work_list);
6306 init_waitqueue_head(&phba->wait_4_mlo_m_q);
6308 /* Initialize the wait queue head for the kernel thread */
6309 init_waitqueue_head(&phba->work_waitq);
6311 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
6312 "1403 Protocols supported %s %s %s\n",
6313 ((phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ?
6315 ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) ?
6317 (phba->nvmet_support ? "NVMET" : " "));
6319 /* Initialize the IO buffer list used by driver for SLI3 SCSI */
6320 spin_lock_init(&phba->scsi_buf_list_get_lock);
6321 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_get);
6322 spin_lock_init(&phba->scsi_buf_list_put_lock);
6323 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
6325 /* Initialize the fabric iocb list */
6326 INIT_LIST_HEAD(&phba->fabric_iocb_list);
6328 /* Initialize list to save ELS buffers */
6329 INIT_LIST_HEAD(&phba->elsbuf);
6331 /* Initialize FCF connection rec list */
6332 INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
6334 /* Initialize OAS configuration list */
6335 spin_lock_init(&phba->devicelock);
6336 INIT_LIST_HEAD(&phba->luns);
6338 /* MBOX heartbeat timer */
6339 timer_setup(&psli->mbox_tmo, lpfc_mbox_timeout, 0);
6340 /* Fabric block timer */
6341 timer_setup(&phba->fabric_block_timer, lpfc_fabric_block_timeout, 0);
6342 /* EA polling mode timer */
6343 timer_setup(&phba->eratt_poll, lpfc_poll_eratt, 0);
6344 /* Heartbeat timer */
6345 timer_setup(&phba->hb_tmofunc, lpfc_hb_timeout, 0);
6347 INIT_DELAYED_WORK(&phba->eq_delay_work, lpfc_hb_eq_delay_work);
6349 INIT_DELAYED_WORK(&phba->idle_stat_delay_work,
6350 lpfc_idle_stat_delay_work);
6356 * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev
6357 * @phba: pointer to lpfc hba data structure.
6359 * This routine is invoked to set up the driver internal resources specific to
6360 * support the SLI-3 HBA device it attached to.
6364 * other values - error
6367 lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
6372 * Initialize timers used by driver
6375 /* FCP polling mode timer */
6376 timer_setup(&phba->fcp_poll_timer, lpfc_poll_timeout, 0);
6378 /* Host attention work mask setup */
6379 phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
6380 phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
6382 /* Get all the module params for configuring this host */
6383 lpfc_get_cfgparam(phba);
6384 /* Set up phase-1 common device driver resources */
6386 rc = lpfc_setup_driver_resource_phase1(phba);
6390 if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
6391 phba->menlo_flag |= HBA_MENLO_SUPPORT;
6392 /* check for menlo minimum sg count */
6393 if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT)
6394 phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
6397 if (!phba->sli.sli3_ring)
6398 phba->sli.sli3_ring = kcalloc(LPFC_SLI3_MAX_RING,
6399 sizeof(struct lpfc_sli_ring),
6401 if (!phba->sli.sli3_ring)
6405 * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
6406 * used to create the sg_dma_buf_pool must be dynamically calculated.
6409 if (phba->sli_rev == LPFC_SLI_REV4)
6410 entry_sz = sizeof(struct sli4_sge);
6412 entry_sz = sizeof(struct ulp_bde64);
6414 /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
6415 if (phba->cfg_enable_bg) {
6417 * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
6418 * the FCP rsp, and a BDE for each. Sice we have no control
6419 * over how many protection data segments the SCSI Layer
6420 * will hand us (ie: there could be one for every block
6421 * in the IO), we just allocate enough BDEs to accomidate
6422 * our max amount and we need to limit lpfc_sg_seg_cnt to
6423 * minimize the risk of running out.
6425 phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
6426 sizeof(struct fcp_rsp) +
6427 (LPFC_MAX_SG_SEG_CNT * entry_sz);
6429 if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
6430 phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;
6432 /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */
6433 phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT;
6436 * The scsi_buf for a regular I/O will hold the FCP cmnd,
6437 * the FCP rsp, a BDE for each, and a BDE for up to
6438 * cfg_sg_seg_cnt data segments.
6440 phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
6441 sizeof(struct fcp_rsp) +
6442 ((phba->cfg_sg_seg_cnt + 2) * entry_sz);
6444 /* Total BDEs in BPL for scsi_sg_list */
6445 phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
6448 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
6449 "9088 INIT sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
6450 phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
6451 phba->cfg_total_seg_cnt);
6453 phba->max_vpi = LPFC_MAX_VPI;
6454 /* This will be set to correct value after config_port mbox */
6455 phba->max_vports = 0;
6458 * Initialize the SLI Layer to run with lpfc HBAs.
6460 lpfc_sli_setup(phba);
6461 lpfc_sli_queue_init(phba);
6463 /* Allocate device driver memory */
6464 if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
6467 phba->lpfc_sg_dma_buf_pool =
6468 dma_pool_create("lpfc_sg_dma_buf_pool",
6469 &phba->pcidev->dev, phba->cfg_sg_dma_buf_size,
6472 if (!phba->lpfc_sg_dma_buf_pool)
6475 phba->lpfc_cmd_rsp_buf_pool =
6476 dma_pool_create("lpfc_cmd_rsp_buf_pool",
6478 sizeof(struct fcp_cmnd) +
6479 sizeof(struct fcp_rsp),
6482 if (!phba->lpfc_cmd_rsp_buf_pool)
6483 goto fail_free_dma_buf_pool;
6486 * Enable sr-iov virtual functions if supported and configured
6487 * through the module parameter.
6489 if (phba->cfg_sriov_nr_virtfn > 0) {
6490 rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
6491 phba->cfg_sriov_nr_virtfn);
6493 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
6494 "2808 Requested number of SR-IOV "
6495 "virtual functions (%d) is not "
6497 phba->cfg_sriov_nr_virtfn);
6498 phba->cfg_sriov_nr_virtfn = 0;
6504 fail_free_dma_buf_pool:
6505 dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
6506 phba->lpfc_sg_dma_buf_pool = NULL;
6508 lpfc_mem_free(phba);
6513 * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
6514 * @phba: pointer to lpfc hba data structure.
6516 * This routine is invoked to unset the driver internal resources set up
6517 * specific for supporting the SLI-3 HBA device it attached to.
6520 lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
6522 /* Free device driver memory allocated */
6523 lpfc_mem_free_all(phba);
6529 * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
6530 * @phba: pointer to lpfc hba data structure.
6532 * This routine is invoked to set up the driver internal resources specific to
6533 * support the SLI-4 HBA device it attached to.
6537 * other values - error
6540 lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
6542 LPFC_MBOXQ_t *mboxq;
6544 int rc, i, max_buf_size;
6545 uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
6546 struct lpfc_mqe *mqe;
6553 phba->sli4_hba.num_present_cpu = lpfc_present_cpu;
6554 phba->sli4_hba.num_possible_cpu = cpumask_last(cpu_possible_mask) + 1;
6555 phba->sli4_hba.curr_disp_cpu = 0;
6557 /* Get all the module params for configuring this host */
6558 lpfc_get_cfgparam(phba);
6560 /* Set up phase-1 common device driver resources */
6561 rc = lpfc_setup_driver_resource_phase1(phba);
6565 /* Before proceed, wait for POST done and device ready */
6566 rc = lpfc_sli4_post_status_check(phba);
6570 /* Allocate all driver workqueues here */
6572 /* The lpfc_wq workqueue for deferred irq use */
6573 phba->wq = alloc_workqueue("lpfc_wq", WQ_MEM_RECLAIM, 0);
6576 * Initialize timers used by driver
6579 timer_setup(&phba->rrq_tmr, lpfc_rrq_timeout, 0);
6581 /* FCF rediscover timer */
6582 timer_setup(&phba->fcf.redisc_wait, lpfc_sli4_fcf_redisc_wait_tmo, 0);
6585 * Control structure for handling external multi-buffer mailbox
6586 * command pass-through.
6588 memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0,
6589 sizeof(struct lpfc_mbox_ext_buf_ctx));
6590 INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
6592 phba->max_vpi = LPFC_MAX_VPI;
6594 /* This will be set to correct value after the read_config mbox */
6595 phba->max_vports = 0;
6597 /* Program the default value of vlan_id and fc_map */
6598 phba->valid_vlan = 0;
6599 phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
6600 phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
6601 phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
6604 * For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands
6605 * we will associate a new ring, for each EQ/CQ/WQ tuple.
6606 * The WQ create will allocate the ring.
6609 /* Initialize buffer queue management fields */
6610 INIT_LIST_HEAD(&phba->hbqs[LPFC_ELS_HBQ].hbq_buffer_list);
6611 phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
6612 phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
6615 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
6617 /* Initialize the Abort buffer list used by driver */
6618 spin_lock_init(&phba->sli4_hba.abts_io_buf_list_lock);
6619 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_io_buf_list);
6621 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
6622 /* Initialize the Abort nvme buffer list used by driver */
6623 spin_lock_init(&phba->sli4_hba.abts_nvmet_buf_list_lock);
6624 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
6625 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_io_wait_list);
6626 spin_lock_init(&phba->sli4_hba.t_active_list_lock);
6627 INIT_LIST_HEAD(&phba->sli4_hba.t_active_ctx_list);
6630 /* This abort list used by worker thread */
6631 spin_lock_init(&phba->sli4_hba.sgl_list_lock);
6632 spin_lock_init(&phba->sli4_hba.nvmet_io_wait_lock);
6635 * Initialize driver internal slow-path work queues
6638 /* Driver internel slow-path CQ Event pool */
6639 INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
6640 /* Response IOCB work queue list */
6641 INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event);
6642 /* Asynchronous event CQ Event work queue list */
6643 INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
6644 /* Fast-path XRI aborted CQ Event work queue list */
6645 INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
6646 /* Slow-path XRI aborted CQ Event work queue list */
6647 INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
6648 /* Receive queue CQ Event work queue list */
6649 INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
6651 /* Initialize extent block lists. */
6652 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list);
6653 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list);
6654 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list);
6655 INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list);
6657 /* Initialize mboxq lists. If the early init routines fail
6658 * these lists need to be correctly initialized.
6660 INIT_LIST_HEAD(&phba->sli.mboxq);
6661 INIT_LIST_HEAD(&phba->sli.mboxq_cmpl);
6663 /* initialize optic_state to 0xFF */
6664 phba->sli4_hba.lnk_info.optic_state = 0xff;
6666 /* Allocate device driver memory */
6667 rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
6671 /* IF Type 2 ports get initialized now. */
6672 if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
6673 LPFC_SLI_INTF_IF_TYPE_2) {
6674 rc = lpfc_pci_function_reset(phba);
6679 phba->temp_sensor_support = 1;
6682 /* Create the bootstrap mailbox command */
6683 rc = lpfc_create_bootstrap_mbox(phba);
6687 /* Set up the host's endian order with the device. */
6688 rc = lpfc_setup_endian_order(phba);
6690 goto out_free_bsmbx;
6692 /* Set up the hba's configuration parameters. */
6693 rc = lpfc_sli4_read_config(phba);
6695 goto out_free_bsmbx;
6696 rc = lpfc_mem_alloc_active_rrq_pool_s4(phba);
6698 goto out_free_bsmbx;
6700 /* IF Type 0 ports get initialized now. */
6701 if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
6702 LPFC_SLI_INTF_IF_TYPE_0) {
6703 rc = lpfc_pci_function_reset(phba);
6705 goto out_free_bsmbx;
6708 mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
6712 goto out_free_bsmbx;
6715 /* Check for NVMET being configured */
6716 phba->nvmet_support = 0;
6717 if (lpfc_enable_nvmet_cnt) {
6719 /* First get WWN of HBA instance */
6720 lpfc_read_nv(phba, mboxq);
6721 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
6722 if (rc != MBX_SUCCESS) {
6723 lpfc_printf_log(phba, KERN_ERR,
6725 "6016 Mailbox failed , mbxCmd x%x "
6726 "READ_NV, mbxStatus x%x\n",
6727 bf_get(lpfc_mqe_command, &mboxq->u.mqe),
6728 bf_get(lpfc_mqe_status, &mboxq->u.mqe));
6729 mempool_free(mboxq, phba->mbox_mem_pool);
6731 goto out_free_bsmbx;
6734 memcpy(&wwn, (char *)mb->un.varRDnvp.nodename,
6736 wwn = cpu_to_be64(wwn);
6737 phba->sli4_hba.wwnn.u.name = wwn;
6738 memcpy(&wwn, (char *)mb->un.varRDnvp.portname,
6740 /* wwn is WWPN of HBA instance */
6741 wwn = cpu_to_be64(wwn);
6742 phba->sli4_hba.wwpn.u.name = wwn;
6744 /* Check to see if it matches any module parameter */
6745 for (i = 0; i < lpfc_enable_nvmet_cnt; i++) {
6746 if (wwn == lpfc_enable_nvmet[i]) {
6747 #if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
6748 if (lpfc_nvmet_mem_alloc(phba))
6751 phba->nvmet_support = 1; /* a match */
6753 lpfc_printf_log(phba, KERN_ERR,
6755 "6017 NVME Target %016llx\n",
6758 lpfc_printf_log(phba, KERN_ERR,
6760 "6021 Can't enable NVME Target."
6761 " NVME_TARGET_FC infrastructure"
6762 " is not in kernel\n");
6764 /* Not supported for NVMET */
6765 phba->cfg_xri_rebalancing = 0;
6766 if (phba->irq_chann_mode == NHT_MODE) {
6767 phba->cfg_irq_chann =
6768 phba->sli4_hba.num_present_cpu;
6769 phba->cfg_hdw_queue =
6770 phba->sli4_hba.num_present_cpu;
6771 phba->irq_chann_mode = NORMAL_MODE;
6778 lpfc_nvme_mod_param_dep(phba);
6780 /* Get the Supported Pages if PORT_CAPABILITIES is supported by port. */
6781 lpfc_supported_pages(mboxq);
6782 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
6784 mqe = &mboxq->u.mqe;
6785 memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
6786 LPFC_MAX_SUPPORTED_PAGES);
6787 for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
6788 switch (pn_page[i]) {
6789 case LPFC_SLI4_PARAMETERS:
6790 phba->sli4_hba.pc_sli4_params.supported = 1;
6796 /* Read the port's SLI4 Parameters capabilities if supported. */
6797 if (phba->sli4_hba.pc_sli4_params.supported)
6798 rc = lpfc_pc_sli4_params_get(phba, mboxq);
6800 mempool_free(mboxq, phba->mbox_mem_pool);
6802 goto out_free_bsmbx;
6807 * Get sli4 parameters that override parameters from Port capabilities.
6808 * If this call fails, it isn't critical unless the SLI4 parameters come
6811 rc = lpfc_get_sli4_parameters(phba, mboxq);
6813 if_type = bf_get(lpfc_sli_intf_if_type,
6814 &phba->sli4_hba.sli_intf);
6815 if_fam = bf_get(lpfc_sli_intf_sli_family,
6816 &phba->sli4_hba.sli_intf);
6817 if (phba->sli4_hba.extents_in_use &&
6818 phba->sli4_hba.rpi_hdrs_in_use) {
6819 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6820 "2999 Unsupported SLI4 Parameters "
6821 "Extents and RPI headers enabled.\n");
6822 if (if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
6823 if_fam == LPFC_SLI_INTF_FAMILY_BE2) {
6824 mempool_free(mboxq, phba->mbox_mem_pool);
6826 goto out_free_bsmbx;
6829 if (!(if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
6830 if_fam == LPFC_SLI_INTF_FAMILY_BE2)) {
6831 mempool_free(mboxq, phba->mbox_mem_pool);
6833 goto out_free_bsmbx;
6838 * 1 for cmd, 1 for rsp, NVME adds an extra one
6839 * for boundary conditions in its max_sgl_segment template.
6842 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
6846 * It doesn't matter what family our adapter is in, we are
6847 * limited to 2 Pages, 512 SGEs, for our SGL.
6848 * There are going to be 2 reserved SGEs: 1 FCP cmnd + 1 FCP rsp
6850 max_buf_size = (2 * SLI4_PAGE_SIZE);
6853 * Since lpfc_sg_seg_cnt is module param, the sg_dma_buf_size
6854 * used to create the sg_dma_buf_pool must be calculated.
6856 if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
6857 /* Both cfg_enable_bg and cfg_external_dif code paths */
6860 * The scsi_buf for a T10-DIF I/O holds the FCP cmnd,
6861 * the FCP rsp, and a SGE. Sice we have no control
6862 * over how many protection segments the SCSI Layer
6863 * will hand us (ie: there could be one for every block
6864 * in the IO), just allocate enough SGEs to accomidate
6865 * our max amount and we need to limit lpfc_sg_seg_cnt
6866 * to minimize the risk of running out.
6868 phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
6869 sizeof(struct fcp_rsp) + max_buf_size;
6871 /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */
6872 phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT;
6875 * If supporting DIF, reduce the seg count for scsi to
6876 * allow room for the DIF sges.
6878 if (phba->cfg_enable_bg &&
6879 phba->cfg_sg_seg_cnt > LPFC_MAX_BG_SLI4_SEG_CNT_DIF)
6880 phba->cfg_scsi_seg_cnt = LPFC_MAX_BG_SLI4_SEG_CNT_DIF;
6882 phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt;
6886 * The scsi_buf for a regular I/O holds the FCP cmnd,
6887 * the FCP rsp, a SGE for each, and a SGE for up to
6888 * cfg_sg_seg_cnt data segments.
6890 phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
6891 sizeof(struct fcp_rsp) +
6892 ((phba->cfg_sg_seg_cnt + extra) *
6893 sizeof(struct sli4_sge));
6895 /* Total SGEs for scsi_sg_list */
6896 phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + extra;
6897 phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt;
6900 * NOTE: if (phba->cfg_sg_seg_cnt + extra) <= 256 we only
6901 * need to post 1 page for the SGL.
6905 if (phba->cfg_xpsgl && !phba->nvmet_support)
6906 phba->cfg_sg_dma_buf_size = LPFC_DEFAULT_XPSGL_SIZE;
6907 else if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ)
6908 phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ;
6910 phba->cfg_sg_dma_buf_size =
6911 SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size);
6913 phba->border_sge_num = phba->cfg_sg_dma_buf_size /
6914 sizeof(struct sli4_sge);
6916 /* Limit to LPFC_MAX_NVME_SEG_CNT for NVME. */
6917 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
6918 if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) {
6919 lpfc_printf_log(phba, KERN_INFO, LOG_NVME | LOG_INIT,
6920 "6300 Reducing NVME sg segment "
6922 LPFC_MAX_NVME_SEG_CNT);
6923 phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
6925 phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
6928 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
6929 "9087 sg_seg_cnt:%d dmabuf_size:%d "
6930 "total:%d scsi:%d nvme:%d\n",
6931 phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
6932 phba->cfg_total_seg_cnt, phba->cfg_scsi_seg_cnt,
6933 phba->cfg_nvme_seg_cnt);
6935 if (phba->cfg_sg_dma_buf_size < SLI4_PAGE_SIZE)
6936 i = phba->cfg_sg_dma_buf_size;
6940 phba->lpfc_sg_dma_buf_pool =
6941 dma_pool_create("lpfc_sg_dma_buf_pool",
6943 phba->cfg_sg_dma_buf_size,
6945 if (!phba->lpfc_sg_dma_buf_pool)
6946 goto out_free_bsmbx;
6948 phba->lpfc_cmd_rsp_buf_pool =
6949 dma_pool_create("lpfc_cmd_rsp_buf_pool",
6951 sizeof(struct fcp_cmnd) +
6952 sizeof(struct fcp_rsp),
6954 if (!phba->lpfc_cmd_rsp_buf_pool)
6955 goto out_free_sg_dma_buf;
6957 mempool_free(mboxq, phba->mbox_mem_pool);
6959 /* Verify OAS is supported */
6960 lpfc_sli4_oas_verify(phba);
6962 /* Verify RAS support on adapter */
6963 lpfc_sli4_ras_init(phba);
6965 /* Verify all the SLI4 queues */
6966 rc = lpfc_sli4_queue_verify(phba);
6968 goto out_free_cmd_rsp_buf;
6970 /* Create driver internal CQE event pool */
6971 rc = lpfc_sli4_cq_event_pool_create(phba);
6973 goto out_free_cmd_rsp_buf;
6975 /* Initialize sgl lists per host */
6976 lpfc_init_sgl_list(phba);
6978 /* Allocate and initialize active sgl array */
6979 rc = lpfc_init_active_sgl_array(phba);
6981 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6982 "1430 Failed to initialize sgl list.\n");
6983 goto out_destroy_cq_event_pool;
6985 rc = lpfc_sli4_init_rpi_hdrs(phba);
6987 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6988 "1432 Failed to initialize rpi headers.\n");
6989 goto out_free_active_sgl;
6992 /* Allocate eligible FCF bmask memory for FCF roundrobin failover */
6993 longs = (LPFC_SLI4_FCF_TBL_INDX_MAX + BITS_PER_LONG - 1)/BITS_PER_LONG;
6994 phba->fcf.fcf_rr_bmask = kcalloc(longs, sizeof(unsigned long),
6996 if (!phba->fcf.fcf_rr_bmask) {
6997 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
6998 "2759 Failed allocate memory for FCF round "
6999 "robin failover bmask\n");
7001 goto out_remove_rpi_hdrs;
7004 phba->sli4_hba.hba_eq_hdl = kcalloc(phba->cfg_irq_chann,
7005 sizeof(struct lpfc_hba_eq_hdl),
7007 if (!phba->sli4_hba.hba_eq_hdl) {
7008 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7009 "2572 Failed allocate memory for "
7010 "fast-path per-EQ handle array\n");
7012 goto out_free_fcf_rr_bmask;
7015 phba->sli4_hba.cpu_map = kcalloc(phba->sli4_hba.num_possible_cpu,
7016 sizeof(struct lpfc_vector_map_info),
7018 if (!phba->sli4_hba.cpu_map) {
7019 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7020 "3327 Failed allocate memory for msi-x "
7021 "interrupt vector mapping\n");
7023 goto out_free_hba_eq_hdl;
7026 phba->sli4_hba.eq_info = alloc_percpu(struct lpfc_eq_intr_info);
7027 if (!phba->sli4_hba.eq_info) {
7028 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7029 "3321 Failed allocation for per_cpu stats\n");
7031 goto out_free_hba_cpu_map;
7034 phba->sli4_hba.idle_stat = kcalloc(phba->sli4_hba.num_possible_cpu,
7035 sizeof(*phba->sli4_hba.idle_stat),
7037 if (!phba->sli4_hba.idle_stat) {
7038 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7039 "3390 Failed allocation for idle_stat\n");
7041 goto out_free_hba_eq_info;
7044 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
7045 phba->sli4_hba.c_stat = alloc_percpu(struct lpfc_hdwq_stat);
7046 if (!phba->sli4_hba.c_stat) {
7047 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7048 "3332 Failed allocating per cpu hdwq stats\n");
7050 goto out_free_hba_idle_stat;
7055 * Enable sr-iov virtual functions if supported and configured
7056 * through the module parameter.
7058 if (phba->cfg_sriov_nr_virtfn > 0) {
7059 rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
7060 phba->cfg_sriov_nr_virtfn);
7062 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
7063 "3020 Requested number of SR-IOV "
7064 "virtual functions (%d) is not "
7066 phba->cfg_sriov_nr_virtfn);
7067 phba->cfg_sriov_nr_virtfn = 0;
7073 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
7074 out_free_hba_idle_stat:
7075 kfree(phba->sli4_hba.idle_stat);
7077 out_free_hba_eq_info:
7078 free_percpu(phba->sli4_hba.eq_info);
7079 out_free_hba_cpu_map:
7080 kfree(phba->sli4_hba.cpu_map);
7081 out_free_hba_eq_hdl:
7082 kfree(phba->sli4_hba.hba_eq_hdl);
7083 out_free_fcf_rr_bmask:
7084 kfree(phba->fcf.fcf_rr_bmask);
7085 out_remove_rpi_hdrs:
7086 lpfc_sli4_remove_rpi_hdrs(phba);
7087 out_free_active_sgl:
7088 lpfc_free_active_sgl(phba);
7089 out_destroy_cq_event_pool:
7090 lpfc_sli4_cq_event_pool_destroy(phba);
7091 out_free_cmd_rsp_buf:
7092 dma_pool_destroy(phba->lpfc_cmd_rsp_buf_pool);
7093 phba->lpfc_cmd_rsp_buf_pool = NULL;
7094 out_free_sg_dma_buf:
7095 dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
7096 phba->lpfc_sg_dma_buf_pool = NULL;
7098 lpfc_destroy_bootstrap_mbox(phba);
7100 lpfc_mem_free(phba);
7105 * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
7106 * @phba: pointer to lpfc hba data structure.
7108 * This routine is invoked to unset the driver internal resources set up
7109 * specific for supporting the SLI-4 HBA device it attached to.
7112 lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
7114 struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
7116 free_percpu(phba->sli4_hba.eq_info);
7117 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
7118 free_percpu(phba->sli4_hba.c_stat);
7120 kfree(phba->sli4_hba.idle_stat);
7122 /* Free memory allocated for msi-x interrupt vector to CPU mapping */
7123 kfree(phba->sli4_hba.cpu_map);
7124 phba->sli4_hba.num_possible_cpu = 0;
7125 phba->sli4_hba.num_present_cpu = 0;
7126 phba->sli4_hba.curr_disp_cpu = 0;
7127 cpumask_clear(&phba->sli4_hba.irq_aff_mask);
7129 /* Free memory allocated for fast-path work queue handles */
7130 kfree(phba->sli4_hba.hba_eq_hdl);
7132 /* Free the allocated rpi headers. */
7133 lpfc_sli4_remove_rpi_hdrs(phba);
7134 lpfc_sli4_remove_rpis(phba);
7136 /* Free eligible FCF index bmask */
7137 kfree(phba->fcf.fcf_rr_bmask);
7139 /* Free the ELS sgl list */
7140 lpfc_free_active_sgl(phba);
7141 lpfc_free_els_sgl_list(phba);
7142 lpfc_free_nvmet_sgl_list(phba);
7144 /* Free the completion queue EQ event pool */
7145 lpfc_sli4_cq_event_release_all(phba);
7146 lpfc_sli4_cq_event_pool_destroy(phba);
7148 /* Release resource identifiers. */
7149 lpfc_sli4_dealloc_resource_identifiers(phba);
7151 /* Free the bsmbx region. */
7152 lpfc_destroy_bootstrap_mbox(phba);
7154 /* Free the SLI Layer memory with SLI4 HBAs */
7155 lpfc_mem_free_all(phba);
7157 /* Free the current connect table */
7158 list_for_each_entry_safe(conn_entry, next_conn_entry,
7159 &phba->fcf_conn_rec_list, list) {
7160 list_del_init(&conn_entry->list);
7168 * lpfc_init_api_table_setup - Set up init api function jump table
7169 * @phba: The hba struct for which this call is being executed.
7170 * @dev_grp: The HBA PCI-Device group number.
7172 * This routine sets up the device INIT interface API function jump table
7175 * Returns: 0 - success, -ENODEV - failure.
7178 lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
7180 phba->lpfc_hba_init_link = lpfc_hba_init_link;
7181 phba->lpfc_hba_down_link = lpfc_hba_down_link;
7182 phba->lpfc_selective_reset = lpfc_selective_reset;
7184 case LPFC_PCI_DEV_LP:
7185 phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
7186 phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
7187 phba->lpfc_stop_port = lpfc_stop_port_s3;
7189 case LPFC_PCI_DEV_OC:
7190 phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
7191 phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
7192 phba->lpfc_stop_port = lpfc_stop_port_s4;
7195 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7196 "1431 Invalid HBA PCI-device group: 0x%x\n",
7205 * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
7206 * @phba: pointer to lpfc hba data structure.
7208 * This routine is invoked to set up the driver internal resources after the
7209 * device specific resource setup to support the HBA device it attached to.
7213 * other values - error
7216 lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
7220 /* Startup the kernel thread for this host adapter. */
7221 phba->worker_thread = kthread_run(lpfc_do_work, phba,
7222 "lpfc_worker_%d", phba->brd_no);
7223 if (IS_ERR(phba->worker_thread)) {
7224 error = PTR_ERR(phba->worker_thread);
7232 * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
7233 * @phba: pointer to lpfc hba data structure.
7235 * This routine is invoked to unset the driver internal resources set up after
7236 * the device specific resource setup for supporting the HBA device it
7240 lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
7243 flush_workqueue(phba->wq);
7244 destroy_workqueue(phba->wq);
7248 /* Stop kernel worker thread */
7249 if (phba->worker_thread)
7250 kthread_stop(phba->worker_thread);
7254 * lpfc_free_iocb_list - Free iocb list.
7255 * @phba: pointer to lpfc hba data structure.
7257 * This routine is invoked to free the driver's IOCB list and memory.
7260 lpfc_free_iocb_list(struct lpfc_hba *phba)
7262 struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
7264 spin_lock_irq(&phba->hbalock);
7265 list_for_each_entry_safe(iocbq_entry, iocbq_next,
7266 &phba->lpfc_iocb_list, list) {
7267 list_del(&iocbq_entry->list);
7269 phba->total_iocbq_bufs--;
7271 spin_unlock_irq(&phba->hbalock);
7277 * lpfc_init_iocb_list - Allocate and initialize iocb list.
7278 * @phba: pointer to lpfc hba data structure.
7279 * @iocb_count: number of requested iocbs
7281 * This routine is invoked to allocate and initizlize the driver's IOCB
7282 * list and set up the IOCB tag array accordingly.
7286 * other values - error
7289 lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
7291 struct lpfc_iocbq *iocbq_entry = NULL;
7295 /* Initialize and populate the iocb list per host. */
7296 INIT_LIST_HEAD(&phba->lpfc_iocb_list);
7297 for (i = 0; i < iocb_count; i++) {
7298 iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
7299 if (iocbq_entry == NULL) {
7300 printk(KERN_ERR "%s: only allocated %d iocbs of "
7301 "expected %d count. Unloading driver.\n",
7302 __func__, i, iocb_count);
7303 goto out_free_iocbq;
7306 iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
7309 printk(KERN_ERR "%s: failed to allocate IOTAG. "
7310 "Unloading driver.\n", __func__);
7311 goto out_free_iocbq;
7313 iocbq_entry->sli4_lxritag = NO_XRI;
7314 iocbq_entry->sli4_xritag = NO_XRI;
7316 spin_lock_irq(&phba->hbalock);
7317 list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
7318 phba->total_iocbq_bufs++;
7319 spin_unlock_irq(&phba->hbalock);
7325 lpfc_free_iocb_list(phba);
7331 * lpfc_free_sgl_list - Free a given sgl list.
7332 * @phba: pointer to lpfc hba data structure.
7333 * @sglq_list: pointer to the head of sgl list.
7335 * This routine is invoked to free a give sgl list and memory.
7338 lpfc_free_sgl_list(struct lpfc_hba *phba, struct list_head *sglq_list)
7340 struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
7342 list_for_each_entry_safe(sglq_entry, sglq_next, sglq_list, list) {
7343 list_del(&sglq_entry->list);
7344 lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
7350 * lpfc_free_els_sgl_list - Free els sgl list.
7351 * @phba: pointer to lpfc hba data structure.
7353 * This routine is invoked to free the driver's els sgl list and memory.
7356 lpfc_free_els_sgl_list(struct lpfc_hba *phba)
7358 LIST_HEAD(sglq_list);
7360 /* Retrieve all els sgls from driver list */
7361 spin_lock_irq(&phba->hbalock);
7362 spin_lock(&phba->sli4_hba.sgl_list_lock);
7363 list_splice_init(&phba->sli4_hba.lpfc_els_sgl_list, &sglq_list);
7364 spin_unlock(&phba->sli4_hba.sgl_list_lock);
7365 spin_unlock_irq(&phba->hbalock);
7367 /* Now free the sgl list */
7368 lpfc_free_sgl_list(phba, &sglq_list);
7372 * lpfc_free_nvmet_sgl_list - Free nvmet sgl list.
7373 * @phba: pointer to lpfc hba data structure.
7375 * This routine is invoked to free the driver's nvmet sgl list and memory.
7378 lpfc_free_nvmet_sgl_list(struct lpfc_hba *phba)
7380 struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
7381 LIST_HEAD(sglq_list);
7383 /* Retrieve all nvmet sgls from driver list */
7384 spin_lock_irq(&phba->hbalock);
7385 spin_lock(&phba->sli4_hba.sgl_list_lock);
7386 list_splice_init(&phba->sli4_hba.lpfc_nvmet_sgl_list, &sglq_list);
7387 spin_unlock(&phba->sli4_hba.sgl_list_lock);
7388 spin_unlock_irq(&phba->hbalock);
7390 /* Now free the sgl list */
7391 list_for_each_entry_safe(sglq_entry, sglq_next, &sglq_list, list) {
7392 list_del(&sglq_entry->list);
7393 lpfc_nvmet_buf_free(phba, sglq_entry->virt, sglq_entry->phys);
7397 /* Update the nvmet_xri_cnt to reflect no current sgls.
7398 * The next initialization cycle sets the count and allocates
7399 * the sgls over again.
7401 phba->sli4_hba.nvmet_xri_cnt = 0;
7405 * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
7406 * @phba: pointer to lpfc hba data structure.
7408 * This routine is invoked to allocate the driver's active sgl memory.
7409 * This array will hold the sglq_entry's for active IOs.
7412 lpfc_init_active_sgl_array(struct lpfc_hba *phba)
7415 size = sizeof(struct lpfc_sglq *);
7416 size *= phba->sli4_hba.max_cfg_param.max_xri;
7418 phba->sli4_hba.lpfc_sglq_active_list =
7419 kzalloc(size, GFP_KERNEL);
7420 if (!phba->sli4_hba.lpfc_sglq_active_list)
7426 * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
7427 * @phba: pointer to lpfc hba data structure.
7429 * This routine is invoked to walk through the array of active sglq entries
7430 * and free all of the resources.
7431 * This is just a place holder for now.
7434 lpfc_free_active_sgl(struct lpfc_hba *phba)
7436 kfree(phba->sli4_hba.lpfc_sglq_active_list);
7440 * lpfc_init_sgl_list - Allocate and initialize sgl list.
7441 * @phba: pointer to lpfc hba data structure.
7443 * This routine is invoked to allocate and initizlize the driver's sgl
7444 * list and set up the sgl xritag tag array accordingly.
7448 lpfc_init_sgl_list(struct lpfc_hba *phba)
7450 /* Initialize and populate the sglq list per host/VF. */
7451 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_els_sgl_list);
7452 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
7453 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_sgl_list);
7454 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
7456 /* els xri-sgl book keeping */
7457 phba->sli4_hba.els_xri_cnt = 0;
7459 /* nvme xri-buffer book keeping */
7460 phba->sli4_hba.io_xri_cnt = 0;
7464 * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
7465 * @phba: pointer to lpfc hba data structure.
7467 * This routine is invoked to post rpi header templates to the
7468 * port for those SLI4 ports that do not support extents. This routine
7469 * posts a PAGE_SIZE memory region to the port to hold up to
7470 * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
7471 * and should be called only when interrupts are disabled.
7475 * -ERROR - otherwise.
7478 lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
7481 struct lpfc_rpi_hdr *rpi_hdr;
7483 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
7484 if (!phba->sli4_hba.rpi_hdrs_in_use)
7486 if (phba->sli4_hba.extents_in_use)
7489 rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
7491 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7492 "0391 Error during rpi post operation\n");
7493 lpfc_sli4_remove_rpis(phba);
7501 * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
7502 * @phba: pointer to lpfc hba data structure.
7504 * This routine is invoked to allocate a single 4KB memory region to
7505 * support rpis and stores them in the phba. This single region
7506 * provides support for up to 64 rpis. The region is used globally
7510 * A valid rpi hdr on success.
7511 * A NULL pointer on any failure.
7513 struct lpfc_rpi_hdr *
7514 lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
7516 uint16_t rpi_limit, curr_rpi_range;
7517 struct lpfc_dmabuf *dmabuf;
7518 struct lpfc_rpi_hdr *rpi_hdr;
7521 * If the SLI4 port supports extents, posting the rpi header isn't
7522 * required. Set the expected maximum count and let the actual value
7523 * get set when extents are fully allocated.
7525 if (!phba->sli4_hba.rpi_hdrs_in_use)
7527 if (phba->sli4_hba.extents_in_use)
7530 /* The limit on the logical index is just the max_rpi count. */
7531 rpi_limit = phba->sli4_hba.max_cfg_param.max_rpi;
7533 spin_lock_irq(&phba->hbalock);
7535 * Establish the starting RPI in this header block. The starting
7536 * rpi is normalized to a zero base because the physical rpi is
7539 curr_rpi_range = phba->sli4_hba.next_rpi;
7540 spin_unlock_irq(&phba->hbalock);
7542 /* Reached full RPI range */
7543 if (curr_rpi_range == rpi_limit)
7547 * First allocate the protocol header region for the port. The
7548 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
7550 dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
7554 dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
7555 LPFC_HDR_TEMPLATE_SIZE,
7556 &dmabuf->phys, GFP_KERNEL);
7557 if (!dmabuf->virt) {
7559 goto err_free_dmabuf;
7562 if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
7564 goto err_free_coherent;
7567 /* Save the rpi header data for cleanup later. */
7568 rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
7570 goto err_free_coherent;
7572 rpi_hdr->dmabuf = dmabuf;
7573 rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
7574 rpi_hdr->page_count = 1;
7575 spin_lock_irq(&phba->hbalock);
7577 /* The rpi_hdr stores the logical index only. */
7578 rpi_hdr->start_rpi = curr_rpi_range;
7579 rpi_hdr->next_rpi = phba->sli4_hba.next_rpi + LPFC_RPI_HDR_COUNT;
7580 list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
7582 spin_unlock_irq(&phba->hbalock);
7586 dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
7587 dmabuf->virt, dmabuf->phys);
7594 * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
7595 * @phba: pointer to lpfc hba data structure.
7597 * This routine is invoked to remove all memory resources allocated
7598 * to support rpis for SLI4 ports not supporting extents. This routine
7599 * presumes the caller has released all rpis consumed by fabric or port
7600 * logins and is prepared to have the header pages removed.
7603 lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
7605 struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
7607 if (!phba->sli4_hba.rpi_hdrs_in_use)
7610 list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
7611 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
7612 list_del(&rpi_hdr->list);
7613 dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
7614 rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
7615 kfree(rpi_hdr->dmabuf);
7619 /* There are no rpis available to the port now. */
7620 phba->sli4_hba.next_rpi = 0;
7624 * lpfc_hba_alloc - Allocate driver hba data structure for a device.
7625 * @pdev: pointer to pci device data structure.
7627 * This routine is invoked to allocate the driver hba data structure for an
7628 * HBA device. If the allocation is successful, the phba reference to the
7629 * PCI device data structure is set.
7632 * pointer to @phba - successful
7635 static struct lpfc_hba *
7636 lpfc_hba_alloc(struct pci_dev *pdev)
7638 struct lpfc_hba *phba;
7640 /* Allocate memory for HBA structure */
7641 phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
7643 dev_err(&pdev->dev, "failed to allocate hba struct\n");
7647 /* Set reference to PCI device in HBA structure */
7648 phba->pcidev = pdev;
7650 /* Assign an unused board number */
7651 phba->brd_no = lpfc_get_instance();
7652 if (phba->brd_no < 0) {
7656 phba->eratt_poll_interval = LPFC_ERATT_POLL_INTERVAL;
7658 spin_lock_init(&phba->ct_ev_lock);
7659 INIT_LIST_HEAD(&phba->ct_ev_waiters);
7665 * lpfc_hba_free - Free driver hba data structure with a device.
7666 * @phba: pointer to lpfc hba data structure.
7668 * This routine is invoked to free the driver hba data structure with an
7672 lpfc_hba_free(struct lpfc_hba *phba)
7674 if (phba->sli_rev == LPFC_SLI_REV4)
7675 kfree(phba->sli4_hba.hdwq);
7677 /* Release the driver assigned board number */
7678 idr_remove(&lpfc_hba_index, phba->brd_no);
7680 /* Free memory allocated with sli3 rings */
7681 kfree(phba->sli.sli3_ring);
7682 phba->sli.sli3_ring = NULL;
7689 * lpfc_create_shost - Create hba physical port with associated scsi host.
7690 * @phba: pointer to lpfc hba data structure.
7692 * This routine is invoked to create HBA physical port and associate a SCSI
7697 * other values - error
7700 lpfc_create_shost(struct lpfc_hba *phba)
7702 struct lpfc_vport *vport;
7703 struct Scsi_Host *shost;
7705 /* Initialize HBA FC structure */
7706 phba->fc_edtov = FF_DEF_EDTOV;
7707 phba->fc_ratov = FF_DEF_RATOV;
7708 phba->fc_altov = FF_DEF_ALTOV;
7709 phba->fc_arbtov = FF_DEF_ARBTOV;
7711 atomic_set(&phba->sdev_cnt, 0);
7712 vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
7716 shost = lpfc_shost_from_vport(vport);
7717 phba->pport = vport;
7719 if (phba->nvmet_support) {
7720 /* Only 1 vport (pport) will support NVME target */
7721 phba->targetport = NULL;
7722 phba->cfg_enable_fc4_type = LPFC_ENABLE_NVME;
7723 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME_DISC,
7724 "6076 NVME Target Found\n");
7727 lpfc_debugfs_initialize(vport);
7728 /* Put reference to SCSI host to driver's device private data */
7729 pci_set_drvdata(phba->pcidev, shost);
7732 * At this point we are fully registered with PSA. In addition,
7733 * any initial discovery should be completed.
7735 vport->load_flag |= FC_ALLOW_FDMI;
7736 if (phba->cfg_enable_SmartSAN ||
7737 (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
7739 /* Setup appropriate attribute masks */
7740 vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
7741 if (phba->cfg_enable_SmartSAN)
7742 vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
7744 vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
7750 * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
7751 * @phba: pointer to lpfc hba data structure.
7753 * This routine is invoked to destroy HBA physical port and the associated
7757 lpfc_destroy_shost(struct lpfc_hba *phba)
7759 struct lpfc_vport *vport = phba->pport;
7761 /* Destroy physical port that associated with the SCSI host */
7762 destroy_port(vport);
7768 * lpfc_setup_bg - Setup Block guard structures and debug areas.
7769 * @phba: pointer to lpfc hba data structure.
7770 * @shost: the shost to be used to detect Block guard settings.
7772 * This routine sets up the local Block guard protocol settings for @shost.
7773 * This routine also allocates memory for debugging bg buffers.
7776 lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
7781 if (phba->cfg_prot_mask && phba->cfg_prot_guard) {
7782 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
7783 "1478 Registering BlockGuard with the "
7786 old_mask = phba->cfg_prot_mask;
7787 old_guard = phba->cfg_prot_guard;
7789 /* Only allow supported values */
7790 phba->cfg_prot_mask &= (SHOST_DIF_TYPE1_PROTECTION |
7791 SHOST_DIX_TYPE0_PROTECTION |
7792 SHOST_DIX_TYPE1_PROTECTION);
7793 phba->cfg_prot_guard &= (SHOST_DIX_GUARD_IP |
7794 SHOST_DIX_GUARD_CRC);
7796 /* DIF Type 1 protection for profiles AST1/C1 is end to end */
7797 if (phba->cfg_prot_mask == SHOST_DIX_TYPE1_PROTECTION)
7798 phba->cfg_prot_mask |= SHOST_DIF_TYPE1_PROTECTION;
7800 if (phba->cfg_prot_mask && phba->cfg_prot_guard) {
7801 if ((old_mask != phba->cfg_prot_mask) ||
7802 (old_guard != phba->cfg_prot_guard))
7803 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7804 "1475 Registering BlockGuard with the "
7805 "SCSI layer: mask %d guard %d\n",
7806 phba->cfg_prot_mask,
7807 phba->cfg_prot_guard);
7809 scsi_host_set_prot(shost, phba->cfg_prot_mask);
7810 scsi_host_set_guard(shost, phba->cfg_prot_guard);
7812 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
7813 "1479 Not Registering BlockGuard with the SCSI "
7814 "layer, Bad protection parameters: %d %d\n",
7815 old_mask, old_guard);
7820 * lpfc_post_init_setup - Perform necessary device post initialization setup.
7821 * @phba: pointer to lpfc hba data structure.
7823 * This routine is invoked to perform all the necessary post initialization
7824 * setup for the device.
7827 lpfc_post_init_setup(struct lpfc_hba *phba)
7829 struct Scsi_Host *shost;
7830 struct lpfc_adapter_event_header adapter_event;
7832 /* Get the default values for Model Name and Description */
7833 lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
7836 * hba setup may have changed the hba_queue_depth so we need to
7837 * adjust the value of can_queue.
7839 shost = pci_get_drvdata(phba->pcidev);
7840 shost->can_queue = phba->cfg_hba_queue_depth - 10;
7842 lpfc_host_attrib_init(shost);
7844 if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
7845 spin_lock_irq(shost->host_lock);
7846 lpfc_poll_start_timer(phba);
7847 spin_unlock_irq(shost->host_lock);
7850 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
7851 "0428 Perform SCSI scan\n");
7852 /* Send board arrival event to upper layer */
7853 adapter_event.event_type = FC_REG_ADAPTER_EVENT;
7854 adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
7855 fc_host_post_vendor_event(shost, fc_get_event_number(),
7856 sizeof(adapter_event),
7857 (char *) &adapter_event,
7863 * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
7864 * @phba: pointer to lpfc hba data structure.
7866 * This routine is invoked to set up the PCI device memory space for device
7867 * with SLI-3 interface spec.
7871 * other values - error
7874 lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
7876 struct pci_dev *pdev = phba->pcidev;
7877 unsigned long bar0map_len, bar2map_len;
7885 /* Set the device DMA mask size */
7886 error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
7888 error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
7893 /* Get the bus address of Bar0 and Bar2 and the number of bytes
7894 * required by each mapping.
7896 phba->pci_bar0_map = pci_resource_start(pdev, 0);
7897 bar0map_len = pci_resource_len(pdev, 0);
7899 phba->pci_bar2_map = pci_resource_start(pdev, 2);
7900 bar2map_len = pci_resource_len(pdev, 2);
7902 /* Map HBA SLIM to a kernel virtual address. */
7903 phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
7904 if (!phba->slim_memmap_p) {
7905 dev_printk(KERN_ERR, &pdev->dev,
7906 "ioremap failed for SLIM memory.\n");
7910 /* Map HBA Control Registers to a kernel virtual address. */
7911 phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
7912 if (!phba->ctrl_regs_memmap_p) {
7913 dev_printk(KERN_ERR, &pdev->dev,
7914 "ioremap failed for HBA control registers.\n");
7915 goto out_iounmap_slim;
7918 /* Allocate memory for SLI-2 structures */
7919 phba->slim2p.virt = dma_alloc_coherent(&pdev->dev, SLI2_SLIM_SIZE,
7920 &phba->slim2p.phys, GFP_KERNEL);
7921 if (!phba->slim2p.virt)
7924 phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
7925 phba->mbox_ext = (phba->slim2p.virt +
7926 offsetof(struct lpfc_sli2_slim, mbx_ext_words));
7927 phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
7928 phba->IOCBs = (phba->slim2p.virt +
7929 offsetof(struct lpfc_sli2_slim, IOCBs));
7931 phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
7932 lpfc_sli_hbq_size(),
7933 &phba->hbqslimp.phys,
7935 if (!phba->hbqslimp.virt)
7938 hbq_count = lpfc_sli_hbq_count();
7939 ptr = phba->hbqslimp.virt;
7940 for (i = 0; i < hbq_count; ++i) {
7941 phba->hbqs[i].hbq_virt = ptr;
7942 INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
7943 ptr += (lpfc_hbq_defs[i]->entry_count *
7944 sizeof(struct lpfc_hbq_entry));
7946 phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
7947 phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
7949 memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
7951 phba->MBslimaddr = phba->slim_memmap_p;
7952 phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
7953 phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
7954 phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
7955 phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
7960 dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
7961 phba->slim2p.virt, phba->slim2p.phys);
7963 iounmap(phba->ctrl_regs_memmap_p);
7965 iounmap(phba->slim_memmap_p);
7971 * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
7972 * @phba: pointer to lpfc hba data structure.
7974 * This routine is invoked to unset the PCI device memory space for device
7975 * with SLI-3 interface spec.
7978 lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
7980 struct pci_dev *pdev;
7982 /* Obtain PCI device reference */
7986 pdev = phba->pcidev;
7988 /* Free coherent DMA memory allocated */
7989 dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
7990 phba->hbqslimp.virt, phba->hbqslimp.phys);
7991 dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
7992 phba->slim2p.virt, phba->slim2p.phys);
7994 /* I/O memory unmap */
7995 iounmap(phba->ctrl_regs_memmap_p);
7996 iounmap(phba->slim_memmap_p);
8002 * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
8003 * @phba: pointer to lpfc hba data structure.
8005 * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
8006 * done and check status.
8008 * Return 0 if successful, otherwise -ENODEV.
8011 lpfc_sli4_post_status_check(struct lpfc_hba *phba)
8013 struct lpfc_register portsmphr_reg, uerrlo_reg, uerrhi_reg;
8014 struct lpfc_register reg_data;
8015 int i, port_error = 0;
8018 memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
8019 memset(®_data, 0, sizeof(reg_data));
8020 if (!phba->sli4_hba.PSMPHRregaddr)
8023 /* Wait up to 30 seconds for the SLI Port POST done and ready */
8024 for (i = 0; i < 3000; i++) {
8025 if (lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
8026 &portsmphr_reg.word0) ||
8027 (bf_get(lpfc_port_smphr_perr, &portsmphr_reg))) {
8028 /* Port has a fatal POST error, break out */
8029 port_error = -ENODEV;
8032 if (LPFC_POST_STAGE_PORT_READY ==
8033 bf_get(lpfc_port_smphr_port_status, &portsmphr_reg))
8039 * If there was a port error during POST, then don't proceed with
8040 * other register reads as the data may not be valid. Just exit.
8043 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8044 "1408 Port Failed POST - portsmphr=0x%x, "
8045 "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, "
8046 "scr2=x%x, hscratch=x%x, pstatus=x%x\n",
8047 portsmphr_reg.word0,
8048 bf_get(lpfc_port_smphr_perr, &portsmphr_reg),
8049 bf_get(lpfc_port_smphr_sfi, &portsmphr_reg),
8050 bf_get(lpfc_port_smphr_nip, &portsmphr_reg),
8051 bf_get(lpfc_port_smphr_ipc, &portsmphr_reg),
8052 bf_get(lpfc_port_smphr_scr1, &portsmphr_reg),
8053 bf_get(lpfc_port_smphr_scr2, &portsmphr_reg),
8054 bf_get(lpfc_port_smphr_host_scratch, &portsmphr_reg),
8055 bf_get(lpfc_port_smphr_port_status, &portsmphr_reg));
8057 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
8058 "2534 Device Info: SLIFamily=0x%x, "
8059 "SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, "
8060 "SLIHint_2=0x%x, FT=0x%x\n",
8061 bf_get(lpfc_sli_intf_sli_family,
8062 &phba->sli4_hba.sli_intf),
8063 bf_get(lpfc_sli_intf_slirev,
8064 &phba->sli4_hba.sli_intf),
8065 bf_get(lpfc_sli_intf_if_type,
8066 &phba->sli4_hba.sli_intf),
8067 bf_get(lpfc_sli_intf_sli_hint1,
8068 &phba->sli4_hba.sli_intf),
8069 bf_get(lpfc_sli_intf_sli_hint2,
8070 &phba->sli4_hba.sli_intf),
8071 bf_get(lpfc_sli_intf_func_type,
8072 &phba->sli4_hba.sli_intf));
8074 * Check for other Port errors during the initialization
8075 * process. Fail the load if the port did not come up
8078 if_type = bf_get(lpfc_sli_intf_if_type,
8079 &phba->sli4_hba.sli_intf);
8081 case LPFC_SLI_INTF_IF_TYPE_0:
8082 phba->sli4_hba.ue_mask_lo =
8083 readl(phba->sli4_hba.u.if_type0.UEMASKLOregaddr);
8084 phba->sli4_hba.ue_mask_hi =
8085 readl(phba->sli4_hba.u.if_type0.UEMASKHIregaddr);
8087 readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
8089 readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
8090 if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
8091 (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
8092 lpfc_printf_log(phba, KERN_ERR,
8094 "1422 Unrecoverable Error "
8095 "Detected during POST "
8096 "uerr_lo_reg=0x%x, "
8097 "uerr_hi_reg=0x%x, "
8098 "ue_mask_lo_reg=0x%x, "
8099 "ue_mask_hi_reg=0x%x\n",
8102 phba->sli4_hba.ue_mask_lo,
8103 phba->sli4_hba.ue_mask_hi);
8104 port_error = -ENODEV;
8107 case LPFC_SLI_INTF_IF_TYPE_2:
8108 case LPFC_SLI_INTF_IF_TYPE_6:
8109 /* Final checks. The port status should be clean. */
8110 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
8112 (bf_get(lpfc_sliport_status_err, ®_data) &&
8113 !bf_get(lpfc_sliport_status_rn, ®_data))) {
8114 phba->work_status[0] =
8115 readl(phba->sli4_hba.u.if_type2.
8117 phba->work_status[1] =
8118 readl(phba->sli4_hba.u.if_type2.
8120 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8121 "2888 Unrecoverable port error "
8122 "following POST: port status reg "
8123 "0x%x, port_smphr reg 0x%x, "
8124 "error 1=0x%x, error 2=0x%x\n",
8126 portsmphr_reg.word0,
8127 phba->work_status[0],
8128 phba->work_status[1]);
8129 port_error = -ENODEV;
8132 case LPFC_SLI_INTF_IF_TYPE_1:
8141 * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
8142 * @phba: pointer to lpfc hba data structure.
8143 * @if_type: The SLI4 interface type getting configured.
8145 * This routine is invoked to set up SLI4 BAR0 PCI config space register
8149 lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
8152 case LPFC_SLI_INTF_IF_TYPE_0:
8153 phba->sli4_hba.u.if_type0.UERRLOregaddr =
8154 phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_LO;
8155 phba->sli4_hba.u.if_type0.UERRHIregaddr =
8156 phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_HI;
8157 phba->sli4_hba.u.if_type0.UEMASKLOregaddr =
8158 phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_LO;
8159 phba->sli4_hba.u.if_type0.UEMASKHIregaddr =
8160 phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_HI;
8161 phba->sli4_hba.SLIINTFregaddr =
8162 phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
8164 case LPFC_SLI_INTF_IF_TYPE_2:
8165 phba->sli4_hba.u.if_type2.EQDregaddr =
8166 phba->sli4_hba.conf_regs_memmap_p +
8167 LPFC_CTL_PORT_EQ_DELAY_OFFSET;
8168 phba->sli4_hba.u.if_type2.ERR1regaddr =
8169 phba->sli4_hba.conf_regs_memmap_p +
8170 LPFC_CTL_PORT_ER1_OFFSET;
8171 phba->sli4_hba.u.if_type2.ERR2regaddr =
8172 phba->sli4_hba.conf_regs_memmap_p +
8173 LPFC_CTL_PORT_ER2_OFFSET;
8174 phba->sli4_hba.u.if_type2.CTRLregaddr =
8175 phba->sli4_hba.conf_regs_memmap_p +
8176 LPFC_CTL_PORT_CTL_OFFSET;
8177 phba->sli4_hba.u.if_type2.STATUSregaddr =
8178 phba->sli4_hba.conf_regs_memmap_p +
8179 LPFC_CTL_PORT_STA_OFFSET;
8180 phba->sli4_hba.SLIINTFregaddr =
8181 phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
8182 phba->sli4_hba.PSMPHRregaddr =
8183 phba->sli4_hba.conf_regs_memmap_p +
8184 LPFC_CTL_PORT_SEM_OFFSET;
8185 phba->sli4_hba.RQDBregaddr =
8186 phba->sli4_hba.conf_regs_memmap_p +
8187 LPFC_ULP0_RQ_DOORBELL;
8188 phba->sli4_hba.WQDBregaddr =
8189 phba->sli4_hba.conf_regs_memmap_p +
8190 LPFC_ULP0_WQ_DOORBELL;
8191 phba->sli4_hba.CQDBregaddr =
8192 phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
8193 phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
8194 phba->sli4_hba.MQDBregaddr =
8195 phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
8196 phba->sli4_hba.BMBXregaddr =
8197 phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
8199 case LPFC_SLI_INTF_IF_TYPE_6:
8200 phba->sli4_hba.u.if_type2.EQDregaddr =
8201 phba->sli4_hba.conf_regs_memmap_p +
8202 LPFC_CTL_PORT_EQ_DELAY_OFFSET;
8203 phba->sli4_hba.u.if_type2.ERR1regaddr =
8204 phba->sli4_hba.conf_regs_memmap_p +
8205 LPFC_CTL_PORT_ER1_OFFSET;
8206 phba->sli4_hba.u.if_type2.ERR2regaddr =
8207 phba->sli4_hba.conf_regs_memmap_p +
8208 LPFC_CTL_PORT_ER2_OFFSET;
8209 phba->sli4_hba.u.if_type2.CTRLregaddr =
8210 phba->sli4_hba.conf_regs_memmap_p +
8211 LPFC_CTL_PORT_CTL_OFFSET;
8212 phba->sli4_hba.u.if_type2.STATUSregaddr =
8213 phba->sli4_hba.conf_regs_memmap_p +
8214 LPFC_CTL_PORT_STA_OFFSET;
8215 phba->sli4_hba.PSMPHRregaddr =
8216 phba->sli4_hba.conf_regs_memmap_p +
8217 LPFC_CTL_PORT_SEM_OFFSET;
8218 phba->sli4_hba.BMBXregaddr =
8219 phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
8221 case LPFC_SLI_INTF_IF_TYPE_1:
8223 dev_printk(KERN_ERR, &phba->pcidev->dev,
8224 "FATAL - unsupported SLI4 interface type - %d\n",
8231 * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
8232 * @phba: pointer to lpfc hba data structure.
8233 * @if_type: sli if type to operate on.
8235 * This routine is invoked to set up SLI4 BAR1 register memory map.
8238 lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
8241 case LPFC_SLI_INTF_IF_TYPE_0:
8242 phba->sli4_hba.PSMPHRregaddr =
8243 phba->sli4_hba.ctrl_regs_memmap_p +
8244 LPFC_SLIPORT_IF0_SMPHR;
8245 phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
8247 phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
8249 phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
8252 case LPFC_SLI_INTF_IF_TYPE_6:
8253 phba->sli4_hba.RQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
8254 LPFC_IF6_RQ_DOORBELL;
8255 phba->sli4_hba.WQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
8256 LPFC_IF6_WQ_DOORBELL;
8257 phba->sli4_hba.CQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
8258 LPFC_IF6_CQ_DOORBELL;
8259 phba->sli4_hba.EQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
8260 LPFC_IF6_EQ_DOORBELL;
8261 phba->sli4_hba.MQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
8262 LPFC_IF6_MQ_DOORBELL;
8264 case LPFC_SLI_INTF_IF_TYPE_2:
8265 case LPFC_SLI_INTF_IF_TYPE_1:
8267 dev_err(&phba->pcidev->dev,
8268 "FATAL - unsupported SLI4 interface type - %d\n",
8275 * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
8276 * @phba: pointer to lpfc hba data structure.
8277 * @vf: virtual function number
8279 * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
8280 * based on the given viftual function number, @vf.
8282 * Return 0 if successful, otherwise -ENODEV.
8285 lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
8287 if (vf > LPFC_VIR_FUNC_MAX)
8290 phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
8291 vf * LPFC_VFR_PAGE_SIZE +
8292 LPFC_ULP0_RQ_DOORBELL);
8293 phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
8294 vf * LPFC_VFR_PAGE_SIZE +
8295 LPFC_ULP0_WQ_DOORBELL);
8296 phba->sli4_hba.CQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
8297 vf * LPFC_VFR_PAGE_SIZE +
8298 LPFC_EQCQ_DOORBELL);
8299 phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
8300 phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
8301 vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
8302 phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
8303 vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
8308 * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
8309 * @phba: pointer to lpfc hba data structure.
8311 * This routine is invoked to create the bootstrap mailbox
8312 * region consistent with the SLI-4 interface spec. This
8313 * routine allocates all memory necessary to communicate
8314 * mailbox commands to the port and sets up all alignment
8315 * needs. No locks are expected to be held when calling
8320 * -ENOMEM - could not allocated memory.
8323 lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
8326 struct lpfc_dmabuf *dmabuf;
8327 struct dma_address *dma_address;
8331 dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
8336 * The bootstrap mailbox region is comprised of 2 parts
8337 * plus an alignment restriction of 16 bytes.
8339 bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
8340 dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, bmbx_size,
8341 &dmabuf->phys, GFP_KERNEL);
8342 if (!dmabuf->virt) {
8348 * Initialize the bootstrap mailbox pointers now so that the register
8349 * operations are simple later. The mailbox dma address is required
8350 * to be 16-byte aligned. Also align the virtual memory as each
8351 * maibox is copied into the bmbx mailbox region before issuing the
8352 * command to the port.
8354 phba->sli4_hba.bmbx.dmabuf = dmabuf;
8355 phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
8357 phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
8358 LPFC_ALIGN_16_BYTE);
8359 phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
8360 LPFC_ALIGN_16_BYTE);
8363 * Set the high and low physical addresses now. The SLI4 alignment
8364 * requirement is 16 bytes and the mailbox is posted to the port
8365 * as two 30-bit addresses. The other data is a bit marking whether
8366 * the 30-bit address is the high or low address.
8367 * Upcast bmbx aphys to 64bits so shift instruction compiles
8368 * clean on 32 bit machines.
8370 dma_address = &phba->sli4_hba.bmbx.dma_address;
8371 phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
8372 pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
8373 dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
8374 LPFC_BMBX_BIT1_ADDR_HI);
8376 pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
8377 dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
8378 LPFC_BMBX_BIT1_ADDR_LO);
8383 * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
8384 * @phba: pointer to lpfc hba data structure.
8386 * This routine is invoked to teardown the bootstrap mailbox
8387 * region and release all host resources. This routine requires
8388 * the caller to ensure all mailbox commands recovered, no
8389 * additional mailbox comands are sent, and interrupts are disabled
8390 * before calling this routine.
8394 lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
8396 dma_free_coherent(&phba->pcidev->dev,
8397 phba->sli4_hba.bmbx.bmbx_size,
8398 phba->sli4_hba.bmbx.dmabuf->virt,
8399 phba->sli4_hba.bmbx.dmabuf->phys);
8401 kfree(phba->sli4_hba.bmbx.dmabuf);
8402 memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
8405 static const char * const lpfc_topo_to_str[] = {
8415 #define LINK_FLAGS_DEF 0x0
8416 #define LINK_FLAGS_P2P 0x1
8417 #define LINK_FLAGS_LOOP 0x2
8419 * lpfc_map_topology - Map the topology read from READ_CONFIG
8420 * @phba: pointer to lpfc hba data structure.
8421 * @rd_config: pointer to read config data
8423 * This routine is invoked to map the topology values as read
8424 * from the read config mailbox command. If the persistent
8425 * topology feature is supported, the firmware will provide the
8426 * saved topology information to be used in INIT_LINK
8429 lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
8433 ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config);
8434 tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config);
8435 pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config);
8437 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
8438 "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x",
8441 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
8442 "2019 FW does not support persistent topology "
8443 "Using driver parameter defined value [%s]",
8444 lpfc_topo_to_str[phba->cfg_topology]);
8447 /* FW supports persistent topology - override module parameter value */
8448 phba->hba_flag |= HBA_PERSISTENT_TOPO;
8449 switch (phba->pcidev->device) {
8450 case PCI_DEVICE_ID_LANCER_G7_FC:
8451 case PCI_DEVICE_ID_LANCER_G6_FC:
8453 phba->cfg_topology = ((pt == LINK_FLAGS_LOOP)
8454 ? FLAGS_TOPOLOGY_MODE_LOOP
8455 : FLAGS_TOPOLOGY_MODE_PT_PT);
8457 phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
8462 /* If topology failover set - pt is '0' or '1' */
8463 phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
8464 FLAGS_TOPOLOGY_MODE_LOOP_PT);
8466 phba->cfg_topology = ((pt == LINK_FLAGS_P2P)
8467 ? FLAGS_TOPOLOGY_MODE_PT_PT
8468 : FLAGS_TOPOLOGY_MODE_LOOP);
8472 if (phba->hba_flag & HBA_PERSISTENT_TOPO) {
8473 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
8474 "2020 Using persistent topology value [%s]",
8475 lpfc_topo_to_str[phba->cfg_topology]);
8477 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
8478 "2021 Invalid topology values from FW "
8479 "Using driver parameter defined value [%s]",
8480 lpfc_topo_to_str[phba->cfg_topology]);
8485 * lpfc_sli4_read_config - Get the config parameters.
8486 * @phba: pointer to lpfc hba data structure.
8488 * This routine is invoked to read the configuration parameters from the HBA.
8489 * The configuration parameters are used to set the base and maximum values
8490 * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
8491 * allocation for the port.
8495 * -ENOMEM - No available memory
8496 * -EIO - The mailbox failed to complete successfully.
8499 lpfc_sli4_read_config(struct lpfc_hba *phba)
8502 struct lpfc_mbx_read_config *rd_config;
8503 union lpfc_sli4_cfg_shdr *shdr;
8504 uint32_t shdr_status, shdr_add_status;
8505 struct lpfc_mbx_get_func_cfg *get_func_cfg;
8506 struct lpfc_rsrc_desc_fcfcoe *desc;
8508 uint16_t forced_link_speed;
8509 uint32_t if_type, qmin;
8510 int length, i, rc = 0, rc2;
8512 pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
8514 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8515 "2011 Unable to allocate memory for issuing "
8516 "SLI_CONFIG_SPECIAL mailbox command\n");
8520 lpfc_read_config(phba, pmb);
8522 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
8523 if (rc != MBX_SUCCESS) {
8524 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8525 "2012 Mailbox failed , mbxCmd x%x "
8526 "READ_CONFIG, mbxStatus x%x\n",
8527 bf_get(lpfc_mqe_command, &pmb->u.mqe),
8528 bf_get(lpfc_mqe_status, &pmb->u.mqe));
8531 rd_config = &pmb->u.mqe.un.rd_config;
8532 if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
8533 phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
8534 phba->sli4_hba.lnk_info.lnk_tp =
8535 bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
8536 phba->sli4_hba.lnk_info.lnk_no =
8537 bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
8538 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
8539 "3081 lnk_type:%d, lnk_numb:%d\n",
8540 phba->sli4_hba.lnk_info.lnk_tp,
8541 phba->sli4_hba.lnk_info.lnk_no);
8543 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
8544 "3082 Mailbox (x%x) returned ldv:x0\n",
8545 bf_get(lpfc_mqe_command, &pmb->u.mqe));
8546 if (bf_get(lpfc_mbx_rd_conf_bbscn_def, rd_config)) {
8547 phba->bbcredit_support = 1;
8548 phba->sli4_hba.bbscn_params.word0 = rd_config->word8;
8551 phba->sli4_hba.conf_trunk =
8552 bf_get(lpfc_mbx_rd_conf_trunk, rd_config);
8553 phba->sli4_hba.extents_in_use =
8554 bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
8555 phba->sli4_hba.max_cfg_param.max_xri =
8556 bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
8557 /* Reduce resource usage in kdump environment */
8558 if (is_kdump_kernel() &&
8559 phba->sli4_hba.max_cfg_param.max_xri > 512)
8560 phba->sli4_hba.max_cfg_param.max_xri = 512;
8561 phba->sli4_hba.max_cfg_param.xri_base =
8562 bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
8563 phba->sli4_hba.max_cfg_param.max_vpi =
8564 bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
8565 /* Limit the max we support */
8566 if (phba->sli4_hba.max_cfg_param.max_vpi > LPFC_MAX_VPORTS)
8567 phba->sli4_hba.max_cfg_param.max_vpi = LPFC_MAX_VPORTS;
8568 phba->sli4_hba.max_cfg_param.vpi_base =
8569 bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
8570 phba->sli4_hba.max_cfg_param.max_rpi =
8571 bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
8572 phba->sli4_hba.max_cfg_param.rpi_base =
8573 bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
8574 phba->sli4_hba.max_cfg_param.max_vfi =
8575 bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
8576 phba->sli4_hba.max_cfg_param.vfi_base =
8577 bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
8578 phba->sli4_hba.max_cfg_param.max_fcfi =
8579 bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
8580 phba->sli4_hba.max_cfg_param.max_eq =
8581 bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
8582 phba->sli4_hba.max_cfg_param.max_rq =
8583 bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
8584 phba->sli4_hba.max_cfg_param.max_wq =
8585 bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
8586 phba->sli4_hba.max_cfg_param.max_cq =
8587 bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
8588 phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
8589 phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
8590 phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
8591 phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
8592 phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
8593 (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
8594 phba->max_vports = phba->max_vpi;
8595 lpfc_map_topology(phba, rd_config);
8596 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
8597 "2003 cfg params Extents? %d "
8602 "FCFI:%d EQ:%d CQ:%d WQ:%d RQ:%d lmt:x%x\n",
8603 phba->sli4_hba.extents_in_use,
8604 phba->sli4_hba.max_cfg_param.xri_base,
8605 phba->sli4_hba.max_cfg_param.max_xri,
8606 phba->sli4_hba.max_cfg_param.vpi_base,
8607 phba->sli4_hba.max_cfg_param.max_vpi,
8608 phba->sli4_hba.max_cfg_param.vfi_base,
8609 phba->sli4_hba.max_cfg_param.max_vfi,
8610 phba->sli4_hba.max_cfg_param.rpi_base,
8611 phba->sli4_hba.max_cfg_param.max_rpi,
8612 phba->sli4_hba.max_cfg_param.max_fcfi,
8613 phba->sli4_hba.max_cfg_param.max_eq,
8614 phba->sli4_hba.max_cfg_param.max_cq,
8615 phba->sli4_hba.max_cfg_param.max_wq,
8616 phba->sli4_hba.max_cfg_param.max_rq,
8620 * Calculate queue resources based on how
8621 * many WQ/CQ/EQs are available.
8623 qmin = phba->sli4_hba.max_cfg_param.max_wq;
8624 if (phba->sli4_hba.max_cfg_param.max_cq < qmin)
8625 qmin = phba->sli4_hba.max_cfg_param.max_cq;
8626 if (phba->sli4_hba.max_cfg_param.max_eq < qmin)
8627 qmin = phba->sli4_hba.max_cfg_param.max_eq;
8629 * Whats left after this can go toward NVME / FCP.
8630 * The minus 4 accounts for ELS, NVME LS, MBOX
8631 * plus one extra. When configured for
8632 * NVMET, FCP io channel WQs are not created.
8636 /* Check to see if there is enough for NVME */
8637 if ((phba->cfg_irq_chann > qmin) ||
8638 (phba->cfg_hdw_queue > qmin)) {
8639 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8640 "2005 Reducing Queues - "
8641 "FW resource limitation: "
8642 "WQ %d CQ %d EQ %d: min %d: "
8644 phba->sli4_hba.max_cfg_param.max_wq,
8645 phba->sli4_hba.max_cfg_param.max_cq,
8646 phba->sli4_hba.max_cfg_param.max_eq,
8647 qmin, phba->cfg_irq_chann,
8648 phba->cfg_hdw_queue);
8650 if (phba->cfg_irq_chann > qmin)
8651 phba->cfg_irq_chann = qmin;
8652 if (phba->cfg_hdw_queue > qmin)
8653 phba->cfg_hdw_queue = qmin;
8660 /* Update link speed if forced link speed is supported */
8661 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
8662 if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
8664 bf_get(lpfc_mbx_rd_conf_link_speed, rd_config);
8665 if (forced_link_speed) {
8666 phba->hba_flag |= HBA_FORCED_LINK_SPEED;
8668 switch (forced_link_speed) {
8670 phba->cfg_link_speed =
8671 LPFC_USER_LINK_SPEED_1G;
8674 phba->cfg_link_speed =
8675 LPFC_USER_LINK_SPEED_2G;
8678 phba->cfg_link_speed =
8679 LPFC_USER_LINK_SPEED_4G;
8682 phba->cfg_link_speed =
8683 LPFC_USER_LINK_SPEED_8G;
8685 case LINK_SPEED_10G:
8686 phba->cfg_link_speed =
8687 LPFC_USER_LINK_SPEED_10G;
8689 case LINK_SPEED_16G:
8690 phba->cfg_link_speed =
8691 LPFC_USER_LINK_SPEED_16G;
8693 case LINK_SPEED_32G:
8694 phba->cfg_link_speed =
8695 LPFC_USER_LINK_SPEED_32G;
8697 case LINK_SPEED_64G:
8698 phba->cfg_link_speed =
8699 LPFC_USER_LINK_SPEED_64G;
8702 phba->cfg_link_speed =
8703 LPFC_USER_LINK_SPEED_AUTO;
8706 lpfc_printf_log(phba, KERN_ERR,
8708 "0047 Unrecognized link "
8711 phba->cfg_link_speed =
8712 LPFC_USER_LINK_SPEED_AUTO;
8717 /* Reset the DFT_HBA_Q_DEPTH to the max xri */
8718 length = phba->sli4_hba.max_cfg_param.max_xri -
8719 lpfc_sli4_get_els_iocb_cnt(phba);
8720 if (phba->cfg_hba_queue_depth > length) {
8721 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
8722 "3361 HBA queue depth changed from %d to %d\n",
8723 phba->cfg_hba_queue_depth, length);
8724 phba->cfg_hba_queue_depth = length;
8727 if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
8728 LPFC_SLI_INTF_IF_TYPE_2)
8731 /* get the pf# and vf# for SLI4 if_type 2 port */
8732 length = (sizeof(struct lpfc_mbx_get_func_cfg) -
8733 sizeof(struct lpfc_sli4_cfg_mhdr));
8734 lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON,
8735 LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG,
8736 length, LPFC_SLI4_MBX_EMBED);
8738 rc2 = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
8739 shdr = (union lpfc_sli4_cfg_shdr *)
8740 &pmb->u.mqe.un.sli4_config.header.cfg_shdr;
8741 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
8742 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
8743 if (rc2 || shdr_status || shdr_add_status) {
8744 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8745 "3026 Mailbox failed , mbxCmd x%x "
8746 "GET_FUNCTION_CONFIG, mbxStatus x%x\n",
8747 bf_get(lpfc_mqe_command, &pmb->u.mqe),
8748 bf_get(lpfc_mqe_status, &pmb->u.mqe));
8752 /* search for fc_fcoe resrouce descriptor */
8753 get_func_cfg = &pmb->u.mqe.un.get_func_cfg;
8755 pdesc_0 = (char *)&get_func_cfg->func_cfg.desc[0];
8756 desc = (struct lpfc_rsrc_desc_fcfcoe *)pdesc_0;
8757 length = bf_get(lpfc_rsrc_desc_fcfcoe_length, desc);
8758 if (length == LPFC_RSRC_DESC_TYPE_FCFCOE_V0_RSVD)
8759 length = LPFC_RSRC_DESC_TYPE_FCFCOE_V0_LENGTH;
8760 else if (length != LPFC_RSRC_DESC_TYPE_FCFCOE_V1_LENGTH)
8763 for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) {
8764 desc = (struct lpfc_rsrc_desc_fcfcoe *)(pdesc_0 + length * i);
8765 if (LPFC_RSRC_DESC_TYPE_FCFCOE ==
8766 bf_get(lpfc_rsrc_desc_fcfcoe_type, desc)) {
8767 phba->sli4_hba.iov.pf_number =
8768 bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc);
8769 phba->sli4_hba.iov.vf_number =
8770 bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc);
8775 if (i < LPFC_RSRC_DESC_MAX_NUM)
8776 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
8777 "3027 GET_FUNCTION_CONFIG: pf_number:%d, "
8778 "vf_number:%d\n", phba->sli4_hba.iov.pf_number,
8779 phba->sli4_hba.iov.vf_number);
8781 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8782 "3028 GET_FUNCTION_CONFIG: failed to find "
8783 "Resource Descriptor:x%x\n",
8784 LPFC_RSRC_DESC_TYPE_FCFCOE);
8787 mempool_free(pmb, phba->mbox_mem_pool);
8792 * lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port.
8793 * @phba: pointer to lpfc hba data structure.
8795 * This routine is invoked to setup the port-side endian order when
8796 * the port if_type is 0. This routine has no function for other
8801 * -ENOMEM - No available memory
8802 * -EIO - The mailbox failed to complete successfully.
8805 lpfc_setup_endian_order(struct lpfc_hba *phba)
8807 LPFC_MBOXQ_t *mboxq;
8808 uint32_t if_type, rc = 0;
8809 uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
8810 HOST_ENDIAN_HIGH_WORD1};
8812 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
8814 case LPFC_SLI_INTF_IF_TYPE_0:
8815 mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
8818 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8819 "0492 Unable to allocate memory for "
8820 "issuing SLI_CONFIG_SPECIAL mailbox "
8826 * The SLI4_CONFIG_SPECIAL mailbox command requires the first
8827 * two words to contain special data values and no other data.
8829 memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
8830 memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
8831 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
8832 if (rc != MBX_SUCCESS) {
8833 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8834 "0493 SLI_CONFIG_SPECIAL mailbox "
8835 "failed with status x%x\n",
8839 mempool_free(mboxq, phba->mbox_mem_pool);
8841 case LPFC_SLI_INTF_IF_TYPE_6:
8842 case LPFC_SLI_INTF_IF_TYPE_2:
8843 case LPFC_SLI_INTF_IF_TYPE_1:
8851 * lpfc_sli4_queue_verify - Verify and update EQ counts
8852 * @phba: pointer to lpfc hba data structure.
8854 * This routine is invoked to check the user settable queue counts for EQs.
8855 * After this routine is called the counts will be set to valid values that
8856 * adhere to the constraints of the system's interrupt vectors and the port's
8861 * -ENOMEM - No available memory
8864 lpfc_sli4_queue_verify(struct lpfc_hba *phba)
8867 * Sanity check for configured queue parameters against the run-time
8871 if (phba->nvmet_support) {
8872 if (phba->cfg_hdw_queue < phba->cfg_nvmet_mrq)
8873 phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
8874 if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
8875 phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
8878 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
8879 "2574 IO channels: hdwQ %d IRQ %d MRQ: %d\n",
8880 phba->cfg_hdw_queue, phba->cfg_irq_chann,
8881 phba->cfg_nvmet_mrq);
8883 /* Get EQ depth from module parameter, fake the default for now */
8884 phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
8885 phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
8887 /* Get CQ depth from module parameter, fake the default for now */
8888 phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
8889 phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
8894 lpfc_alloc_io_wq_cq(struct lpfc_hba *phba, int idx)
8896 struct lpfc_queue *qdesc;
8900 cpu = lpfc_find_cpu_handle(phba, idx, LPFC_FIND_BY_HDWQ);
8901 /* Create Fast Path IO CQs */
8902 if (phba->enab_exp_wqcq_pages)
8903 /* Increase the CQ size when WQEs contain an embedded cdb */
8904 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
8905 phba->sli4_hba.cq_esize,
8906 LPFC_CQE_EXP_COUNT, cpu);
8909 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
8910 phba->sli4_hba.cq_esize,
8911 phba->sli4_hba.cq_ecount, cpu);
8913 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8914 "0499 Failed allocate fast-path IO CQ (%d)\n",
8918 qdesc->qe_valid = 1;
8921 phba->sli4_hba.hdwq[idx].io_cq = qdesc;
8923 /* Create Fast Path IO WQs */
8924 if (phba->enab_exp_wqcq_pages) {
8925 /* Increase the WQ size when WQEs contain an embedded cdb */
8926 wqesize = (phba->fcp_embed_io) ?
8927 LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize;
8928 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
8930 LPFC_WQE_EXP_COUNT, cpu);
8932 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
8933 phba->sli4_hba.wq_esize,
8934 phba->sli4_hba.wq_ecount, cpu);
8937 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8938 "0503 Failed allocate fast-path IO WQ (%d)\n",
8944 phba->sli4_hba.hdwq[idx].io_wq = qdesc;
8945 list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);
8950 * lpfc_sli4_queue_create - Create all the SLI4 queues
8951 * @phba: pointer to lpfc hba data structure.
8953 * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
8954 * operation. For each SLI4 queue type, the parameters such as queue entry
8955 * count (queue depth) shall be taken from the module parameter. For now,
8956 * we just use some constant number as place holder.
8960 * -ENOMEM - No availble memory
8961 * -EIO - The mailbox failed to complete successfully.
8964 lpfc_sli4_queue_create(struct lpfc_hba *phba)
8966 struct lpfc_queue *qdesc;
8967 int idx, cpu, eqcpu;
8968 struct lpfc_sli4_hdw_queue *qp;
8969 struct lpfc_vector_map_info *cpup;
8970 struct lpfc_vector_map_info *eqcpup;
8971 struct lpfc_eq_intr_info *eqi;
8974 * Create HBA Record arrays.
8975 * Both NVME and FCP will share that same vectors / EQs
8977 phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
8978 phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
8979 phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
8980 phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
8981 phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
8982 phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
8983 phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
8984 phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
8985 phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
8986 phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
8988 if (!phba->sli4_hba.hdwq) {
8989 phba->sli4_hba.hdwq = kcalloc(
8990 phba->cfg_hdw_queue, sizeof(struct lpfc_sli4_hdw_queue),
8992 if (!phba->sli4_hba.hdwq) {
8993 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
8994 "6427 Failed allocate memory for "
8995 "fast-path Hardware Queue array\n");
8998 /* Prepare hardware queues to take IO buffers */
8999 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
9000 qp = &phba->sli4_hba.hdwq[idx];
9001 spin_lock_init(&qp->io_buf_list_get_lock);
9002 spin_lock_init(&qp->io_buf_list_put_lock);
9003 INIT_LIST_HEAD(&qp->lpfc_io_buf_list_get);
9004 INIT_LIST_HEAD(&qp->lpfc_io_buf_list_put);
9005 qp->get_io_bufs = 0;
9006 qp->put_io_bufs = 0;
9007 qp->total_io_bufs = 0;
9008 spin_lock_init(&qp->abts_io_buf_list_lock);
9009 INIT_LIST_HEAD(&qp->lpfc_abts_io_buf_list);
9010 qp->abts_scsi_io_bufs = 0;
9011 qp->abts_nvme_io_bufs = 0;
9012 INIT_LIST_HEAD(&qp->sgl_list);
9013 INIT_LIST_HEAD(&qp->cmd_rsp_buf_list);
9014 spin_lock_init(&qp->hdwq_lock);
9018 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
9019 if (phba->nvmet_support) {
9020 phba->sli4_hba.nvmet_cqset = kcalloc(
9021 phba->cfg_nvmet_mrq,
9022 sizeof(struct lpfc_queue *),
9024 if (!phba->sli4_hba.nvmet_cqset) {
9025 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9026 "3121 Fail allocate memory for "
9027 "fast-path CQ set array\n");
9030 phba->sli4_hba.nvmet_mrq_hdr = kcalloc(
9031 phba->cfg_nvmet_mrq,
9032 sizeof(struct lpfc_queue *),
9034 if (!phba->sli4_hba.nvmet_mrq_hdr) {
9035 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9036 "3122 Fail allocate memory for "
9037 "fast-path RQ set hdr array\n");
9040 phba->sli4_hba.nvmet_mrq_data = kcalloc(
9041 phba->cfg_nvmet_mrq,
9042 sizeof(struct lpfc_queue *),
9044 if (!phba->sli4_hba.nvmet_mrq_data) {
9045 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9046 "3124 Fail allocate memory for "
9047 "fast-path RQ set data array\n");
9053 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list);
9055 /* Create HBA Event Queues (EQs) */
9056 for_each_present_cpu(cpu) {
9057 /* We only want to create 1 EQ per vector, even though
9058 * multiple CPUs might be using that vector. so only
9059 * selects the CPUs that are LPFC_CPU_FIRST_IRQ.
9061 cpup = &phba->sli4_hba.cpu_map[cpu];
9062 if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
9065 /* Get a ptr to the Hardware Queue associated with this CPU */
9066 qp = &phba->sli4_hba.hdwq[cpup->hdwq];
9068 /* Allocate an EQ */
9069 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9070 phba->sli4_hba.eq_esize,
9071 phba->sli4_hba.eq_ecount, cpu);
9073 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9074 "0497 Failed allocate EQ (%d)\n",
9078 qdesc->qe_valid = 1;
9079 qdesc->hdwq = cpup->hdwq;
9080 qdesc->chann = cpu; /* First CPU this EQ is affinitized to */
9081 qdesc->last_cpu = qdesc->chann;
9083 /* Save the allocated EQ in the Hardware Queue */
9086 eqi = per_cpu_ptr(phba->sli4_hba.eq_info, qdesc->last_cpu);
9087 list_add(&qdesc->cpu_list, &eqi->list);
9090 /* Now we need to populate the other Hardware Queues, that share
9091 * an IRQ vector, with the associated EQ ptr.
9093 for_each_present_cpu(cpu) {
9094 cpup = &phba->sli4_hba.cpu_map[cpu];
9096 /* Check for EQ already allocated in previous loop */
9097 if (cpup->flag & LPFC_CPU_FIRST_IRQ)
9100 /* Check for multiple CPUs per hdwq */
9101 qp = &phba->sli4_hba.hdwq[cpup->hdwq];
9105 /* We need to share an EQ for this hdwq */
9106 eqcpu = lpfc_find_cpu_handle(phba, cpup->eq, LPFC_FIND_BY_EQ);
9107 eqcpup = &phba->sli4_hba.cpu_map[eqcpu];
9108 qp->hba_eq = phba->sli4_hba.hdwq[eqcpup->hdwq].hba_eq;
9111 /* Allocate IO Path SLI4 CQ/WQs */
9112 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
9113 if (lpfc_alloc_io_wq_cq(phba, idx))
9117 if (phba->nvmet_support) {
9118 for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) {
9119 cpu = lpfc_find_cpu_handle(phba, idx,
9121 qdesc = lpfc_sli4_queue_alloc(phba,
9122 LPFC_DEFAULT_PAGE_SIZE,
9123 phba->sli4_hba.cq_esize,
9124 phba->sli4_hba.cq_ecount,
9127 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9128 "3142 Failed allocate NVME "
9129 "CQ Set (%d)\n", idx);
9132 qdesc->qe_valid = 1;
9135 phba->sli4_hba.nvmet_cqset[idx] = qdesc;
9140 * Create Slow Path Completion Queues (CQs)
9143 cpu = lpfc_find_cpu_handle(phba, 0, LPFC_FIND_BY_EQ);
9144 /* Create slow-path Mailbox Command Complete Queue */
9145 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9146 phba->sli4_hba.cq_esize,
9147 phba->sli4_hba.cq_ecount, cpu);
9149 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9150 "0500 Failed allocate slow-path mailbox CQ\n");
9153 qdesc->qe_valid = 1;
9154 phba->sli4_hba.mbx_cq = qdesc;
9156 /* Create slow-path ELS Complete Queue */
9157 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9158 phba->sli4_hba.cq_esize,
9159 phba->sli4_hba.cq_ecount, cpu);
9161 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9162 "0501 Failed allocate slow-path ELS CQ\n");
9165 qdesc->qe_valid = 1;
9167 phba->sli4_hba.els_cq = qdesc;
9171 * Create Slow Path Work Queues (WQs)
9174 /* Create Mailbox Command Queue */
9176 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9177 phba->sli4_hba.mq_esize,
9178 phba->sli4_hba.mq_ecount, cpu);
9180 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9181 "0505 Failed allocate slow-path MQ\n");
9185 phba->sli4_hba.mbx_wq = qdesc;
9188 * Create ELS Work Queues
9191 /* Create slow-path ELS Work Queue */
9192 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9193 phba->sli4_hba.wq_esize,
9194 phba->sli4_hba.wq_ecount, cpu);
9196 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9197 "0504 Failed allocate slow-path ELS WQ\n");
9201 phba->sli4_hba.els_wq = qdesc;
9202 list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);
9204 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
9205 /* Create NVME LS Complete Queue */
9206 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9207 phba->sli4_hba.cq_esize,
9208 phba->sli4_hba.cq_ecount, cpu);
9210 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9211 "6079 Failed allocate NVME LS CQ\n");
9215 qdesc->qe_valid = 1;
9216 phba->sli4_hba.nvmels_cq = qdesc;
9218 /* Create NVME LS Work Queue */
9219 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9220 phba->sli4_hba.wq_esize,
9221 phba->sli4_hba.wq_ecount, cpu);
9223 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9224 "6080 Failed allocate NVME LS WQ\n");
9228 phba->sli4_hba.nvmels_wq = qdesc;
9229 list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);
9233 * Create Receive Queue (RQ)
9236 /* Create Receive Queue for header */
9237 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9238 phba->sli4_hba.rq_esize,
9239 phba->sli4_hba.rq_ecount, cpu);
9241 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9242 "0506 Failed allocate receive HRQ\n");
9245 phba->sli4_hba.hdr_rq = qdesc;
9247 /* Create Receive Queue for data */
9248 qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
9249 phba->sli4_hba.rq_esize,
9250 phba->sli4_hba.rq_ecount, cpu);
9252 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9253 "0507 Failed allocate receive DRQ\n");
9256 phba->sli4_hba.dat_rq = qdesc;
9258 if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
9259 phba->nvmet_support) {
9260 for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) {
9261 cpu = lpfc_find_cpu_handle(phba, idx,
9263 /* Create NVMET Receive Queue for header */
9264 qdesc = lpfc_sli4_queue_alloc(phba,
9265 LPFC_DEFAULT_PAGE_SIZE,
9266 phba->sli4_hba.rq_esize,
9267 LPFC_NVMET_RQE_DEF_COUNT,
9270 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9271 "3146 Failed allocate "
9276 phba->sli4_hba.nvmet_mrq_hdr[idx] = qdesc;
9278 /* Only needed for header of RQ pair */
9279 qdesc->rqbp = kzalloc_node(sizeof(*qdesc->rqbp),
9282 if (qdesc->rqbp == NULL) {
9283 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9284 "6131 Failed allocate "
9289 /* Put list in known state in case driver load fails. */
9290 INIT_LIST_HEAD(&qdesc->rqbp->rqb_buffer_list);
9292 /* Create NVMET Receive Queue for data */
9293 qdesc = lpfc_sli4_queue_alloc(phba,
9294 LPFC_DEFAULT_PAGE_SIZE,
9295 phba->sli4_hba.rq_esize,
9296 LPFC_NVMET_RQE_DEF_COUNT,
9299 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9300 "3156 Failed allocate "
9305 phba->sli4_hba.nvmet_mrq_data[idx] = qdesc;
9309 /* Clear NVME stats */
9310 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
9311 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
9312 memset(&phba->sli4_hba.hdwq[idx].nvme_cstat, 0,
9313 sizeof(phba->sli4_hba.hdwq[idx].nvme_cstat));
9317 /* Clear SCSI stats */
9318 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
9319 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
9320 memset(&phba->sli4_hba.hdwq[idx].scsi_cstat, 0,
9321 sizeof(phba->sli4_hba.hdwq[idx].scsi_cstat));
9328 lpfc_sli4_queue_destroy(phba);
9333 __lpfc_sli4_release_queue(struct lpfc_queue **qp)
9336 lpfc_sli4_queue_free(*qp);
9342 lpfc_sli4_release_queues(struct lpfc_queue ***qs, int max)
9349 for (idx = 0; idx < max; idx++)
9350 __lpfc_sli4_release_queue(&(*qs)[idx]);
9357 lpfc_sli4_release_hdwq(struct lpfc_hba *phba)
9359 struct lpfc_sli4_hdw_queue *hdwq;
9360 struct lpfc_queue *eq;
9363 hdwq = phba->sli4_hba.hdwq;
9365 /* Loop thru all Hardware Queues */
9366 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
9367 /* Free the CQ/WQ corresponding to the Hardware Queue */
9368 lpfc_sli4_queue_free(hdwq[idx].io_cq);
9369 lpfc_sli4_queue_free(hdwq[idx].io_wq);
9370 hdwq[idx].hba_eq = NULL;
9371 hdwq[idx].io_cq = NULL;
9372 hdwq[idx].io_wq = NULL;
9373 if (phba->cfg_xpsgl && !phba->nvmet_support)
9374 lpfc_free_sgl_per_hdwq(phba, &hdwq[idx]);
9375 lpfc_free_cmd_rsp_buf_per_hdwq(phba, &hdwq[idx]);
9377 /* Loop thru all IRQ vectors */
9378 for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
9379 /* Free the EQ corresponding to the IRQ vector */
9380 eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
9381 lpfc_sli4_queue_free(eq);
9382 phba->sli4_hba.hba_eq_hdl[idx].eq = NULL;
9387 * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
9388 * @phba: pointer to lpfc hba data structure.
9390 * This routine is invoked to release all the SLI4 queues with the FCoE HBA
9395 * -ENOMEM - No available memory
9396 * -EIO - The mailbox failed to complete successfully.
9399 lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
9402 * Set FREE_INIT before beginning to free the queues.
9403 * Wait until the users of queues to acknowledge to
9404 * release queues by clearing FREE_WAIT.
9406 spin_lock_irq(&phba->hbalock);
9407 phba->sli.sli_flag |= LPFC_QUEUE_FREE_INIT;
9408 while (phba->sli.sli_flag & LPFC_QUEUE_FREE_WAIT) {
9409 spin_unlock_irq(&phba->hbalock);
9411 spin_lock_irq(&phba->hbalock);
9413 spin_unlock_irq(&phba->hbalock);
9415 lpfc_sli4_cleanup_poll_list(phba);
9417 /* Release HBA eqs */
9418 if (phba->sli4_hba.hdwq)
9419 lpfc_sli4_release_hdwq(phba);
9421 if (phba->nvmet_support) {
9422 lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_cqset,
9423 phba->cfg_nvmet_mrq);
9425 lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_mrq_hdr,
9426 phba->cfg_nvmet_mrq);
9427 lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_mrq_data,
9428 phba->cfg_nvmet_mrq);
9431 /* Release mailbox command work queue */
9432 __lpfc_sli4_release_queue(&phba->sli4_hba.mbx_wq);
9434 /* Release ELS work queue */
9435 __lpfc_sli4_release_queue(&phba->sli4_hba.els_wq);
9437 /* Release ELS work queue */
9438 __lpfc_sli4_release_queue(&phba->sli4_hba.nvmels_wq);
9440 /* Release unsolicited receive queue */
9441 __lpfc_sli4_release_queue(&phba->sli4_hba.hdr_rq);
9442 __lpfc_sli4_release_queue(&phba->sli4_hba.dat_rq);
9444 /* Release ELS complete queue */
9445 __lpfc_sli4_release_queue(&phba->sli4_hba.els_cq);
9447 /* Release NVME LS complete queue */
9448 __lpfc_sli4_release_queue(&phba->sli4_hba.nvmels_cq);
9450 /* Release mailbox command complete queue */
9451 __lpfc_sli4_release_queue(&phba->sli4_hba.mbx_cq);
9453 /* Everything on this list has been freed */
9454 INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list);
9456 /* Done with freeing the queues */
9457 spin_lock_irq(&phba->hbalock);
9458 phba->sli.sli_flag &= ~LPFC_QUEUE_FREE_INIT;
9459 spin_unlock_irq(&phba->hbalock);
9463 lpfc_free_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *rq)
9465 struct lpfc_rqb *rqbp;
9466 struct lpfc_dmabuf *h_buf;
9467 struct rqb_dmabuf *rqb_buffer;
9470 while (!list_empty(&rqbp->rqb_buffer_list)) {
9471 list_remove_head(&rqbp->rqb_buffer_list, h_buf,
9472 struct lpfc_dmabuf, list);
9474 rqb_buffer = container_of(h_buf, struct rqb_dmabuf, hbuf);
9475 (rqbp->rqb_free_buffer)(phba, rqb_buffer);
9476 rqbp->buffer_count--;
9482 lpfc_create_wq_cq(struct lpfc_hba *phba, struct lpfc_queue *eq,
9483 struct lpfc_queue *cq, struct lpfc_queue *wq, uint16_t *cq_map,
9484 int qidx, uint32_t qtype)
9486 struct lpfc_sli_ring *pring;
9489 if (!eq || !cq || !wq) {
9490 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9491 "6085 Fast-path %s (%d) not allocated\n",
9492 ((eq) ? ((cq) ? "WQ" : "CQ") : "EQ"), qidx);
9496 /* create the Cq first */
9497 rc = lpfc_cq_create(phba, cq, eq,
9498 (qtype == LPFC_MBOX) ? LPFC_MCQ : LPFC_WCQ, qtype);
9500 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9501 "6086 Failed setup of CQ (%d), rc = 0x%x\n",
9502 qidx, (uint32_t)rc);
9506 if (qtype != LPFC_MBOX) {
9507 /* Setup cq_map for fast lookup */
9509 *cq_map = cq->queue_id;
9511 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9512 "6087 CQ setup: cq[%d]-id=%d, parent eq[%d]-id=%d\n",
9513 qidx, cq->queue_id, qidx, eq->queue_id);
9516 rc = lpfc_wq_create(phba, wq, cq, qtype);
9518 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9519 "4618 Fail setup fastpath WQ (%d), rc = 0x%x\n",
9520 qidx, (uint32_t)rc);
9521 /* no need to tear down cq - caller will do so */
9525 /* Bind this CQ/WQ to the NVME ring */
9527 pring->sli.sli4.wqp = (void *)wq;
9530 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9531 "2593 WQ setup: wq[%d]-id=%d assoc=%d, cq[%d]-id=%d\n",
9532 qidx, wq->queue_id, wq->assoc_qid, qidx, cq->queue_id);
9534 rc = lpfc_mq_create(phba, wq, cq, LPFC_MBOX);
9536 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9537 "0539 Failed setup of slow-path MQ: "
9539 /* no need to tear down cq - caller will do so */
9543 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9544 "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
9545 phba->sli4_hba.mbx_wq->queue_id,
9546 phba->sli4_hba.mbx_cq->queue_id);
9553 * lpfc_setup_cq_lookup - Setup the CQ lookup table
9554 * @phba: pointer to lpfc hba data structure.
9556 * This routine will populate the cq_lookup table by all
9557 * available CQ queue_id's.
9560 lpfc_setup_cq_lookup(struct lpfc_hba *phba)
9562 struct lpfc_queue *eq, *childq;
9565 memset(phba->sli4_hba.cq_lookup, 0,
9566 (sizeof(struct lpfc_queue *) * (phba->sli4_hba.cq_max + 1)));
9567 /* Loop thru all IRQ vectors */
9568 for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
9569 /* Get the EQ corresponding to the IRQ vector */
9570 eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
9573 /* Loop through all CQs associated with that EQ */
9574 list_for_each_entry(childq, &eq->child_list, list) {
9575 if (childq->queue_id > phba->sli4_hba.cq_max)
9577 if (childq->subtype == LPFC_IO)
9578 phba->sli4_hba.cq_lookup[childq->queue_id] =
9585 * lpfc_sli4_queue_setup - Set up all the SLI4 queues
9586 * @phba: pointer to lpfc hba data structure.
9588 * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
9593 * -ENOMEM - No available memory
9594 * -EIO - The mailbox failed to complete successfully.
9597 lpfc_sli4_queue_setup(struct lpfc_hba *phba)
9599 uint32_t shdr_status, shdr_add_status;
9600 union lpfc_sli4_cfg_shdr *shdr;
9601 struct lpfc_vector_map_info *cpup;
9602 struct lpfc_sli4_hdw_queue *qp;
9603 LPFC_MBOXQ_t *mboxq;
9605 uint32_t length, usdelay;
9608 /* Check for dual-ULP support */
9609 mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
9611 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9612 "3249 Unable to allocate memory for "
9613 "QUERY_FW_CFG mailbox command\n");
9616 length = (sizeof(struct lpfc_mbx_query_fw_config) -
9617 sizeof(struct lpfc_sli4_cfg_mhdr));
9618 lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
9619 LPFC_MBOX_OPCODE_QUERY_FW_CFG,
9620 length, LPFC_SLI4_MBX_EMBED);
9622 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
9624 shdr = (union lpfc_sli4_cfg_shdr *)
9625 &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
9626 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
9627 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
9628 if (shdr_status || shdr_add_status || rc) {
9629 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9630 "3250 QUERY_FW_CFG mailbox failed with status "
9631 "x%x add_status x%x, mbx status x%x\n",
9632 shdr_status, shdr_add_status, rc);
9633 if (rc != MBX_TIMEOUT)
9634 mempool_free(mboxq, phba->mbox_mem_pool);
9639 phba->sli4_hba.fw_func_mode =
9640 mboxq->u.mqe.un.query_fw_cfg.rsp.function_mode;
9641 phba->sli4_hba.ulp0_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp0_mode;
9642 phba->sli4_hba.ulp1_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp1_mode;
9643 phba->sli4_hba.physical_port =
9644 mboxq->u.mqe.un.query_fw_cfg.rsp.physical_port;
9645 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9646 "3251 QUERY_FW_CFG: func_mode:x%x, ulp0_mode:x%x, "
9647 "ulp1_mode:x%x\n", phba->sli4_hba.fw_func_mode,
9648 phba->sli4_hba.ulp0_mode, phba->sli4_hba.ulp1_mode);
9650 if (rc != MBX_TIMEOUT)
9651 mempool_free(mboxq, phba->mbox_mem_pool);
9654 * Set up HBA Event Queues (EQs)
9656 qp = phba->sli4_hba.hdwq;
9658 /* Set up HBA event queue */
9660 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9661 "3147 Fast-path EQs not allocated\n");
9666 /* Loop thru all IRQ vectors */
9667 for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
9668 /* Create HBA Event Queues (EQs) in order */
9669 for_each_present_cpu(cpu) {
9670 cpup = &phba->sli4_hba.cpu_map[cpu];
9672 /* Look for the CPU thats using that vector with
9673 * LPFC_CPU_FIRST_IRQ set.
9675 if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
9677 if (qidx != cpup->eq)
9680 /* Create an EQ for that vector */
9681 rc = lpfc_eq_create(phba, qp[cpup->hdwq].hba_eq,
9682 phba->cfg_fcp_imax);
9684 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9685 "0523 Failed setup of fast-path"
9686 " EQ (%d), rc = 0x%x\n",
9687 cpup->eq, (uint32_t)rc);
9691 /* Save the EQ for that vector in the hba_eq_hdl */
9692 phba->sli4_hba.hba_eq_hdl[cpup->eq].eq =
9693 qp[cpup->hdwq].hba_eq;
9695 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9696 "2584 HBA EQ setup: queue[%d]-id=%d\n",
9698 qp[cpup->hdwq].hba_eq->queue_id);
9702 /* Loop thru all Hardware Queues */
9703 for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
9704 cpu = lpfc_find_cpu_handle(phba, qidx, LPFC_FIND_BY_HDWQ);
9705 cpup = &phba->sli4_hba.cpu_map[cpu];
9707 /* Create the CQ/WQ corresponding to the Hardware Queue */
9708 rc = lpfc_create_wq_cq(phba,
9709 phba->sli4_hba.hdwq[cpup->hdwq].hba_eq,
9712 &phba->sli4_hba.hdwq[qidx].io_cq_map,
9716 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9717 "0535 Failed to setup fastpath "
9718 "IO WQ/CQ (%d), rc = 0x%x\n",
9719 qidx, (uint32_t)rc);
9725 * Set up Slow Path Complete Queues (CQs)
9728 /* Set up slow-path MBOX CQ/MQ */
9730 if (!phba->sli4_hba.mbx_cq || !phba->sli4_hba.mbx_wq) {
9731 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9732 "0528 %s not allocated\n",
9733 phba->sli4_hba.mbx_cq ?
9734 "Mailbox WQ" : "Mailbox CQ");
9739 rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
9740 phba->sli4_hba.mbx_cq,
9741 phba->sli4_hba.mbx_wq,
9742 NULL, 0, LPFC_MBOX);
9744 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9745 "0529 Failed setup of mailbox WQ/CQ: rc = 0x%x\n",
9749 if (phba->nvmet_support) {
9750 if (!phba->sli4_hba.nvmet_cqset) {
9751 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9752 "3165 Fast-path NVME CQ Set "
9753 "array not allocated\n");
9757 if (phba->cfg_nvmet_mrq > 1) {
9758 rc = lpfc_cq_create_set(phba,
9759 phba->sli4_hba.nvmet_cqset,
9761 LPFC_WCQ, LPFC_NVMET);
9763 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9764 "3164 Failed setup of NVME CQ "
9770 /* Set up NVMET Receive Complete Queue */
9771 rc = lpfc_cq_create(phba, phba->sli4_hba.nvmet_cqset[0],
9773 LPFC_WCQ, LPFC_NVMET);
9775 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9776 "6089 Failed setup NVMET CQ: "
9777 "rc = 0x%x\n", (uint32_t)rc);
9780 phba->sli4_hba.nvmet_cqset[0]->chann = 0;
9782 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9783 "6090 NVMET CQ setup: cq-id=%d, "
9784 "parent eq-id=%d\n",
9785 phba->sli4_hba.nvmet_cqset[0]->queue_id,
9786 qp[0].hba_eq->queue_id);
9790 /* Set up slow-path ELS WQ/CQ */
9791 if (!phba->sli4_hba.els_cq || !phba->sli4_hba.els_wq) {
9792 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9793 "0530 ELS %s not allocated\n",
9794 phba->sli4_hba.els_cq ? "WQ" : "CQ");
9798 rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
9799 phba->sli4_hba.els_cq,
9800 phba->sli4_hba.els_wq,
9803 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9804 "0525 Failed setup of ELS WQ/CQ: rc = 0x%x\n",
9808 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9809 "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
9810 phba->sli4_hba.els_wq->queue_id,
9811 phba->sli4_hba.els_cq->queue_id);
9813 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
9814 /* Set up NVME LS Complete Queue */
9815 if (!phba->sli4_hba.nvmels_cq || !phba->sli4_hba.nvmels_wq) {
9816 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9817 "6091 LS %s not allocated\n",
9818 phba->sli4_hba.nvmels_cq ? "WQ" : "CQ");
9822 rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
9823 phba->sli4_hba.nvmels_cq,
9824 phba->sli4_hba.nvmels_wq,
9825 NULL, 0, LPFC_NVME_LS);
9827 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9828 "0526 Failed setup of NVVME LS WQ/CQ: "
9829 "rc = 0x%x\n", (uint32_t)rc);
9833 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9834 "6096 ELS WQ setup: wq-id=%d, "
9835 "parent cq-id=%d\n",
9836 phba->sli4_hba.nvmels_wq->queue_id,
9837 phba->sli4_hba.nvmels_cq->queue_id);
9841 * Create NVMET Receive Queue (RQ)
9843 if (phba->nvmet_support) {
9844 if ((!phba->sli4_hba.nvmet_cqset) ||
9845 (!phba->sli4_hba.nvmet_mrq_hdr) ||
9846 (!phba->sli4_hba.nvmet_mrq_data)) {
9847 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9848 "6130 MRQ CQ Queues not "
9853 if (phba->cfg_nvmet_mrq > 1) {
9854 rc = lpfc_mrq_create(phba,
9855 phba->sli4_hba.nvmet_mrq_hdr,
9856 phba->sli4_hba.nvmet_mrq_data,
9857 phba->sli4_hba.nvmet_cqset,
9860 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9861 "6098 Failed setup of NVMET "
9868 rc = lpfc_rq_create(phba,
9869 phba->sli4_hba.nvmet_mrq_hdr[0],
9870 phba->sli4_hba.nvmet_mrq_data[0],
9871 phba->sli4_hba.nvmet_cqset[0],
9874 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9875 "6057 Failed setup of NVMET "
9876 "Receive Queue: rc = 0x%x\n",
9882 phba, KERN_INFO, LOG_INIT,
9883 "6099 NVMET RQ setup: hdr-rq-id=%d, "
9884 "dat-rq-id=%d parent cq-id=%d\n",
9885 phba->sli4_hba.nvmet_mrq_hdr[0]->queue_id,
9886 phba->sli4_hba.nvmet_mrq_data[0]->queue_id,
9887 phba->sli4_hba.nvmet_cqset[0]->queue_id);
9892 if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
9893 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9894 "0540 Receive Queue not allocated\n");
9899 rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
9900 phba->sli4_hba.els_cq, LPFC_USOL);
9902 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9903 "0541 Failed setup of Receive Queue: "
9904 "rc = 0x%x\n", (uint32_t)rc);
9908 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
9909 "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
9910 "parent cq-id=%d\n",
9911 phba->sli4_hba.hdr_rq->queue_id,
9912 phba->sli4_hba.dat_rq->queue_id,
9913 phba->sli4_hba.els_cq->queue_id);
9915 if (phba->cfg_fcp_imax)
9916 usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax;
9920 for (qidx = 0; qidx < phba->cfg_irq_chann;
9921 qidx += LPFC_MAX_EQ_DELAY_EQID_CNT)
9922 lpfc_modify_hba_eq_delay(phba, qidx, LPFC_MAX_EQ_DELAY_EQID_CNT,
9925 if (phba->sli4_hba.cq_max) {
9926 kfree(phba->sli4_hba.cq_lookup);
9927 phba->sli4_hba.cq_lookup = kcalloc((phba->sli4_hba.cq_max + 1),
9928 sizeof(struct lpfc_queue *), GFP_KERNEL);
9929 if (!phba->sli4_hba.cq_lookup) {
9930 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
9931 "0549 Failed setup of CQ Lookup table: "
9932 "size 0x%x\n", phba->sli4_hba.cq_max);
9936 lpfc_setup_cq_lookup(phba);
9941 lpfc_sli4_queue_unset(phba);
9947 * lpfc_sli4_queue_unset - Unset all the SLI4 queues
9948 * @phba: pointer to lpfc hba data structure.
9950 * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
9955 * -ENOMEM - No available memory
9956 * -EIO - The mailbox failed to complete successfully.
9959 lpfc_sli4_queue_unset(struct lpfc_hba *phba)
9961 struct lpfc_sli4_hdw_queue *qp;
9962 struct lpfc_queue *eq;
9965 /* Unset mailbox command work queue */
9966 if (phba->sli4_hba.mbx_wq)
9967 lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
9969 /* Unset NVME LS work queue */
9970 if (phba->sli4_hba.nvmels_wq)
9971 lpfc_wq_destroy(phba, phba->sli4_hba.nvmels_wq);
9973 /* Unset ELS work queue */
9974 if (phba->sli4_hba.els_wq)
9975 lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
9977 /* Unset unsolicited receive queue */
9978 if (phba->sli4_hba.hdr_rq)
9979 lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq,
9980 phba->sli4_hba.dat_rq);
9982 /* Unset mailbox command complete queue */
9983 if (phba->sli4_hba.mbx_cq)
9984 lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
9986 /* Unset ELS complete queue */
9987 if (phba->sli4_hba.els_cq)
9988 lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
9990 /* Unset NVME LS complete queue */
9991 if (phba->sli4_hba.nvmels_cq)
9992 lpfc_cq_destroy(phba, phba->sli4_hba.nvmels_cq);
9994 if (phba->nvmet_support) {
9995 /* Unset NVMET MRQ queue */
9996 if (phba->sli4_hba.nvmet_mrq_hdr) {
9997 for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++)
10000 phba->sli4_hba.nvmet_mrq_hdr[qidx],
10001 phba->sli4_hba.nvmet_mrq_data[qidx]);
10004 /* Unset NVMET CQ Set complete queue */
10005 if (phba->sli4_hba.nvmet_cqset) {
10006 for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++)
10008 phba, phba->sli4_hba.nvmet_cqset[qidx]);
10012 /* Unset fast-path SLI4 queues */
10013 if (phba->sli4_hba.hdwq) {
10014 /* Loop thru all Hardware Queues */
10015 for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
10016 /* Destroy the CQ/WQ corresponding to Hardware Queue */
10017 qp = &phba->sli4_hba.hdwq[qidx];
10018 lpfc_wq_destroy(phba, qp->io_wq);
10019 lpfc_cq_destroy(phba, qp->io_cq);
10021 /* Loop thru all IRQ vectors */
10022 for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
10023 /* Destroy the EQ corresponding to the IRQ vector */
10024 eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
10025 lpfc_eq_destroy(phba, eq);
10029 kfree(phba->sli4_hba.cq_lookup);
10030 phba->sli4_hba.cq_lookup = NULL;
10031 phba->sli4_hba.cq_max = 0;
10035 * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
10036 * @phba: pointer to lpfc hba data structure.
10038 * This routine is invoked to allocate and set up a pool of completion queue
10039 * events. The body of the completion queue event is a completion queue entry
10040 * CQE. For now, this pool is used for the interrupt service routine to queue
10041 * the following HBA completion queue events for the worker thread to process:
10042 * - Mailbox asynchronous events
10043 * - Receive queue completion unsolicited events
10044 * Later, this can be used for all the slow-path events.
10048 * -ENOMEM - No available memory
10051 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
10053 struct lpfc_cq_event *cq_event;
10056 for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
10057 cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
10059 goto out_pool_create_fail;
10060 list_add_tail(&cq_event->list,
10061 &phba->sli4_hba.sp_cqe_event_pool);
10065 out_pool_create_fail:
10066 lpfc_sli4_cq_event_pool_destroy(phba);
10071 * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
10072 * @phba: pointer to lpfc hba data structure.
10074 * This routine is invoked to free the pool of completion queue events at
10075 * driver unload time. Note that, it is the responsibility of the driver
10076 * cleanup routine to free all the outstanding completion-queue events
10077 * allocated from this pool back into the pool before invoking this routine
10078 * to destroy the pool.
10081 lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
10083 struct lpfc_cq_event *cq_event, *next_cq_event;
10085 list_for_each_entry_safe(cq_event, next_cq_event,
10086 &phba->sli4_hba.sp_cqe_event_pool, list) {
10087 list_del(&cq_event->list);
10093 * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
10094 * @phba: pointer to lpfc hba data structure.
10096 * This routine is the lock free version of the API invoked to allocate a
10097 * completion-queue event from the free pool.
10099 * Return: Pointer to the newly allocated completion-queue event if successful
10102 struct lpfc_cq_event *
10103 __lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
10105 struct lpfc_cq_event *cq_event = NULL;
10107 list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
10108 struct lpfc_cq_event, list);
10113 * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
10114 * @phba: pointer to lpfc hba data structure.
10116 * This routine is the lock version of the API invoked to allocate a
10117 * completion-queue event from the free pool.
10119 * Return: Pointer to the newly allocated completion-queue event if successful
10122 struct lpfc_cq_event *
10123 lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
10125 struct lpfc_cq_event *cq_event;
10126 unsigned long iflags;
10128 spin_lock_irqsave(&phba->hbalock, iflags);
10129 cq_event = __lpfc_sli4_cq_event_alloc(phba);
10130 spin_unlock_irqrestore(&phba->hbalock, iflags);
10135 * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
10136 * @phba: pointer to lpfc hba data structure.
10137 * @cq_event: pointer to the completion queue event to be freed.
10139 * This routine is the lock free version of the API invoked to release a
10140 * completion-queue event back into the free pool.
10143 __lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
10144 struct lpfc_cq_event *cq_event)
10146 list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
10150 * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
10151 * @phba: pointer to lpfc hba data structure.
10152 * @cq_event: pointer to the completion queue event to be freed.
10154 * This routine is the lock version of the API invoked to release a
10155 * completion-queue event back into the free pool.
10158 lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
10159 struct lpfc_cq_event *cq_event)
10161 unsigned long iflags;
10162 spin_lock_irqsave(&phba->hbalock, iflags);
10163 __lpfc_sli4_cq_event_release(phba, cq_event);
10164 spin_unlock_irqrestore(&phba->hbalock, iflags);
10168 * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
10169 * @phba: pointer to lpfc hba data structure.
10171 * This routine is to free all the pending completion-queue events to the
10172 * back into the free pool for device reset.
10175 lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
10177 LIST_HEAD(cqelist);
10178 struct lpfc_cq_event *cqe;
10179 unsigned long iflags;
10181 /* Retrieve all the pending WCQEs from pending WCQE lists */
10182 spin_lock_irqsave(&phba->hbalock, iflags);
10183 /* Pending FCP XRI abort events */
10184 list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
10186 /* Pending ELS XRI abort events */
10187 list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
10189 /* Pending asynnc events */
10190 list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
10192 spin_unlock_irqrestore(&phba->hbalock, iflags);
10194 while (!list_empty(&cqelist)) {
10195 list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
10196 lpfc_sli4_cq_event_release(phba, cqe);
10201 * lpfc_pci_function_reset - Reset pci function.
10202 * @phba: pointer to lpfc hba data structure.
10204 * This routine is invoked to request a PCI function reset. It will destroys
10205 * all resources assigned to the PCI function which originates this request.
10209 * -ENOMEM - No available memory
10210 * -EIO - The mailbox failed to complete successfully.
10213 lpfc_pci_function_reset(struct lpfc_hba *phba)
10215 LPFC_MBOXQ_t *mboxq;
10216 uint32_t rc = 0, if_type;
10217 uint32_t shdr_status, shdr_add_status;
10219 uint32_t port_reset = 0;
10220 union lpfc_sli4_cfg_shdr *shdr;
10221 struct lpfc_register reg_data;
10224 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
10226 case LPFC_SLI_INTF_IF_TYPE_0:
10227 mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
10230 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10231 "0494 Unable to allocate memory for "
10232 "issuing SLI_FUNCTION_RESET mailbox "
10237 /* Setup PCI function reset mailbox-ioctl command */
10238 lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
10239 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
10240 LPFC_SLI4_MBX_EMBED);
10241 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
10242 shdr = (union lpfc_sli4_cfg_shdr *)
10243 &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
10244 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
10245 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
10247 if (rc != MBX_TIMEOUT)
10248 mempool_free(mboxq, phba->mbox_mem_pool);
10249 if (shdr_status || shdr_add_status || rc) {
10250 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10251 "0495 SLI_FUNCTION_RESET mailbox "
10252 "failed with status x%x add_status x%x,"
10253 " mbx status x%x\n",
10254 shdr_status, shdr_add_status, rc);
10258 case LPFC_SLI_INTF_IF_TYPE_2:
10259 case LPFC_SLI_INTF_IF_TYPE_6:
10262 * Poll the Port Status Register and wait for RDY for
10263 * up to 30 seconds. If the port doesn't respond, treat
10266 for (rdy_chk = 0; rdy_chk < 1500; rdy_chk++) {
10267 if (lpfc_readl(phba->sli4_hba.u.if_type2.
10268 STATUSregaddr, ®_data.word0)) {
10272 if (bf_get(lpfc_sliport_status_rdy, ®_data))
10277 if (!bf_get(lpfc_sliport_status_rdy, ®_data)) {
10278 phba->work_status[0] = readl(
10279 phba->sli4_hba.u.if_type2.ERR1regaddr);
10280 phba->work_status[1] = readl(
10281 phba->sli4_hba.u.if_type2.ERR2regaddr);
10282 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10283 "2890 Port not ready, port status reg "
10284 "0x%x error 1=0x%x, error 2=0x%x\n",
10286 phba->work_status[0],
10287 phba->work_status[1]);
10294 * Reset the port now
10296 reg_data.word0 = 0;
10297 bf_set(lpfc_sliport_ctrl_end, ®_data,
10298 LPFC_SLIPORT_LITTLE_ENDIAN);
10299 bf_set(lpfc_sliport_ctrl_ip, ®_data,
10300 LPFC_SLIPORT_INIT_PORT);
10301 writel(reg_data.word0, phba->sli4_hba.u.if_type2.
10304 pci_read_config_word(phba->pcidev,
10305 PCI_DEVICE_ID, &devid);
10310 } else if (bf_get(lpfc_sliport_status_rn, ®_data)) {
10316 case LPFC_SLI_INTF_IF_TYPE_1:
10322 /* Catch the not-ready port failure after a port reset. */
10324 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10325 "3317 HBA not functional: IP Reset Failed "
10326 "try: echo fw_reset > board_mode\n");
10334 * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
10335 * @phba: pointer to lpfc hba data structure.
10337 * This routine is invoked to set up the PCI device memory space for device
10338 * with SLI-4 interface spec.
10342 * other values - error
10345 lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
10347 struct pci_dev *pdev = phba->pcidev;
10348 unsigned long bar0map_len, bar1map_len, bar2map_len;
10355 /* Set the device DMA mask size */
10356 error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
10358 error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
10363 * The BARs and register set definitions and offset locations are
10364 * dependent on the if_type.
10366 if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
10367 &phba->sli4_hba.sli_intf.word0)) {
10371 /* There is no SLI3 failback for SLI4 devices. */
10372 if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) !=
10373 LPFC_SLI_INTF_VALID) {
10374 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10375 "2894 SLI_INTF reg contents invalid "
10376 "sli_intf reg 0x%x\n",
10377 phba->sli4_hba.sli_intf.word0);
10381 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
10383 * Get the bus address of SLI4 device Bar regions and the
10384 * number of bytes required by each mapping. The mapping of the
10385 * particular PCI BARs regions is dependent on the type of
10388 if (pci_resource_start(pdev, PCI_64BIT_BAR0)) {
10389 phba->pci_bar0_map = pci_resource_start(pdev, PCI_64BIT_BAR0);
10390 bar0map_len = pci_resource_len(pdev, PCI_64BIT_BAR0);
10393 * Map SLI4 PCI Config Space Register base to a kernel virtual
10396 phba->sli4_hba.conf_regs_memmap_p =
10397 ioremap(phba->pci_bar0_map, bar0map_len);
10398 if (!phba->sli4_hba.conf_regs_memmap_p) {
10399 dev_printk(KERN_ERR, &pdev->dev,
10400 "ioremap failed for SLI4 PCI config "
10404 phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p;
10405 /* Set up BAR0 PCI config space register memory map */
10406 lpfc_sli4_bar0_register_memmap(phba, if_type);
10408 phba->pci_bar0_map = pci_resource_start(pdev, 1);
10409 bar0map_len = pci_resource_len(pdev, 1);
10410 if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
10411 dev_printk(KERN_ERR, &pdev->dev,
10412 "FATAL - No BAR0 mapping for SLI4, if_type 2\n");
10415 phba->sli4_hba.conf_regs_memmap_p =
10416 ioremap(phba->pci_bar0_map, bar0map_len);
10417 if (!phba->sli4_hba.conf_regs_memmap_p) {
10418 dev_printk(KERN_ERR, &pdev->dev,
10419 "ioremap failed for SLI4 PCI config "
10423 lpfc_sli4_bar0_register_memmap(phba, if_type);
10426 if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
10427 if (pci_resource_start(pdev, PCI_64BIT_BAR2)) {
10429 * Map SLI4 if type 0 HBA Control Register base to a
10430 * kernel virtual address and setup the registers.
10432 phba->pci_bar1_map = pci_resource_start(pdev,
10434 bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
10435 phba->sli4_hba.ctrl_regs_memmap_p =
10436 ioremap(phba->pci_bar1_map,
10438 if (!phba->sli4_hba.ctrl_regs_memmap_p) {
10439 dev_err(&pdev->dev,
10440 "ioremap failed for SLI4 HBA "
10441 "control registers.\n");
10443 goto out_iounmap_conf;
10445 phba->pci_bar2_memmap_p =
10446 phba->sli4_hba.ctrl_regs_memmap_p;
10447 lpfc_sli4_bar1_register_memmap(phba, if_type);
10450 goto out_iounmap_conf;
10454 if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
10455 (pci_resource_start(pdev, PCI_64BIT_BAR2))) {
10457 * Map SLI4 if type 6 HBA Doorbell Register base to a kernel
10458 * virtual address and setup the registers.
10460 phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2);
10461 bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
10462 phba->sli4_hba.drbl_regs_memmap_p =
10463 ioremap(phba->pci_bar1_map, bar1map_len);
10464 if (!phba->sli4_hba.drbl_regs_memmap_p) {
10465 dev_err(&pdev->dev,
10466 "ioremap failed for SLI4 HBA doorbell registers.\n");
10468 goto out_iounmap_conf;
10470 phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
10471 lpfc_sli4_bar1_register_memmap(phba, if_type);
10474 if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
10475 if (pci_resource_start(pdev, PCI_64BIT_BAR4)) {
10477 * Map SLI4 if type 0 HBA Doorbell Register base to
10478 * a kernel virtual address and setup the registers.
10480 phba->pci_bar2_map = pci_resource_start(pdev,
10482 bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
10483 phba->sli4_hba.drbl_regs_memmap_p =
10484 ioremap(phba->pci_bar2_map,
10486 if (!phba->sli4_hba.drbl_regs_memmap_p) {
10487 dev_err(&pdev->dev,
10488 "ioremap failed for SLI4 HBA"
10489 " doorbell registers.\n");
10491 goto out_iounmap_ctrl;
10493 phba->pci_bar4_memmap_p =
10494 phba->sli4_hba.drbl_regs_memmap_p;
10495 error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
10497 goto out_iounmap_all;
10500 goto out_iounmap_all;
10504 if (if_type == LPFC_SLI_INTF_IF_TYPE_6 &&
10505 pci_resource_start(pdev, PCI_64BIT_BAR4)) {
10507 * Map SLI4 if type 6 HBA DPP Register base to a kernel
10508 * virtual address and setup the registers.
10510 phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
10511 bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
10512 phba->sli4_hba.dpp_regs_memmap_p =
10513 ioremap(phba->pci_bar2_map, bar2map_len);
10514 if (!phba->sli4_hba.dpp_regs_memmap_p) {
10515 dev_err(&pdev->dev,
10516 "ioremap failed for SLI4 HBA dpp registers.\n");
10518 goto out_iounmap_ctrl;
10520 phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
10523 /* Set up the EQ/CQ register handeling functions now */
10525 case LPFC_SLI_INTF_IF_TYPE_0:
10526 case LPFC_SLI_INTF_IF_TYPE_2:
10527 phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr;
10528 phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_write_eq_db;
10529 phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_write_cq_db;
10531 case LPFC_SLI_INTF_IF_TYPE_6:
10532 phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_if6_eq_clr_intr;
10533 phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_if6_write_eq_db;
10534 phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_if6_write_cq_db;
10543 iounmap(phba->sli4_hba.drbl_regs_memmap_p);
10545 iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
10547 iounmap(phba->sli4_hba.conf_regs_memmap_p);
10553 * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
10554 * @phba: pointer to lpfc hba data structure.
10556 * This routine is invoked to unset the PCI device memory space for device
10557 * with SLI-4 interface spec.
10560 lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
10563 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
10566 case LPFC_SLI_INTF_IF_TYPE_0:
10567 iounmap(phba->sli4_hba.drbl_regs_memmap_p);
10568 iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
10569 iounmap(phba->sli4_hba.conf_regs_memmap_p);
10571 case LPFC_SLI_INTF_IF_TYPE_2:
10572 iounmap(phba->sli4_hba.conf_regs_memmap_p);
10574 case LPFC_SLI_INTF_IF_TYPE_6:
10575 iounmap(phba->sli4_hba.drbl_regs_memmap_p);
10576 iounmap(phba->sli4_hba.conf_regs_memmap_p);
10577 if (phba->sli4_hba.dpp_regs_memmap_p)
10578 iounmap(phba->sli4_hba.dpp_regs_memmap_p);
10580 case LPFC_SLI_INTF_IF_TYPE_1:
10582 dev_printk(KERN_ERR, &phba->pcidev->dev,
10583 "FATAL - unsupported SLI4 interface type - %d\n",
10590 * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
10591 * @phba: pointer to lpfc hba data structure.
10593 * This routine is invoked to enable the MSI-X interrupt vectors to device
10594 * with SLI-3 interface specs.
10598 * other values - error
10601 lpfc_sli_enable_msix(struct lpfc_hba *phba)
10606 /* Set up MSI-X multi-message vectors */
10607 rc = pci_alloc_irq_vectors(phba->pcidev,
10608 LPFC_MSIX_VECTORS, LPFC_MSIX_VECTORS, PCI_IRQ_MSIX);
10610 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
10611 "0420 PCI enable MSI-X failed (%d)\n", rc);
10616 * Assign MSI-X vectors to interrupt handlers
10619 /* vector-0 is associated to slow-path handler */
10620 rc = request_irq(pci_irq_vector(phba->pcidev, 0),
10621 &lpfc_sli_sp_intr_handler, 0,
10622 LPFC_SP_DRIVER_HANDLER_NAME, phba);
10624 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
10625 "0421 MSI-X slow-path request_irq failed "
10630 /* vector-1 is associated to fast-path handler */
10631 rc = request_irq(pci_irq_vector(phba->pcidev, 1),
10632 &lpfc_sli_fp_intr_handler, 0,
10633 LPFC_FP_DRIVER_HANDLER_NAME, phba);
10636 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
10637 "0429 MSI-X fast-path request_irq failed "
10643 * Configure HBA MSI-X attention conditions to messages
10645 pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
10649 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
10650 "0474 Unable to allocate memory for issuing "
10651 "MBOX_CONFIG_MSI command\n");
10654 rc = lpfc_config_msi(phba, pmb);
10657 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
10658 if (rc != MBX_SUCCESS) {
10659 lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
10660 "0351 Config MSI mailbox command failed, "
10661 "mbxCmd x%x, mbxStatus x%x\n",
10662 pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
10666 /* Free memory allocated for mailbox command */
10667 mempool_free(pmb, phba->mbox_mem_pool);
10671 /* Free memory allocated for mailbox command */
10672 mempool_free(pmb, phba->mbox_mem_pool);
10675 /* free the irq already requested */
10676 free_irq(pci_irq_vector(phba->pcidev, 1), phba);
10679 /* free the irq already requested */
10680 free_irq(pci_irq_vector(phba->pcidev, 0), phba);
10683 /* Unconfigure MSI-X capability structure */
10684 pci_free_irq_vectors(phba->pcidev);
10691 * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
10692 * @phba: pointer to lpfc hba data structure.
10694 * This routine is invoked to enable the MSI interrupt mode to device with
10695 * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
10696 * enable the MSI vector. The device driver is responsible for calling the
10697 * request_irq() to register MSI vector with a interrupt the handler, which
10698 * is done in this function.
10702 * other values - error
10705 lpfc_sli_enable_msi(struct lpfc_hba *phba)
10709 rc = pci_enable_msi(phba->pcidev);
10711 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
10712 "0462 PCI enable MSI mode success.\n");
10714 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
10715 "0471 PCI enable MSI mode failed (%d)\n", rc);
10719 rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
10720 0, LPFC_DRIVER_NAME, phba);
10722 pci_disable_msi(phba->pcidev);
10723 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
10724 "0478 MSI request_irq failed (%d)\n", rc);
10730 * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
10731 * @phba: pointer to lpfc hba data structure.
10732 * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X).
10734 * This routine is invoked to enable device interrupt and associate driver's
10735 * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
10736 * spec. Depends on the interrupt mode configured to the driver, the driver
10737 * will try to fallback from the configured interrupt mode to an interrupt
10738 * mode which is supported by the platform, kernel, and device in the order
10740 * MSI-X -> MSI -> IRQ.
10744 * other values - error
10747 lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
10749 uint32_t intr_mode = LPFC_INTR_ERROR;
10752 if (cfg_mode == 2) {
10753 /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
10754 retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
10756 /* Now, try to enable MSI-X interrupt mode */
10757 retval = lpfc_sli_enable_msix(phba);
10759 /* Indicate initialization to MSI-X mode */
10760 phba->intr_type = MSIX;
10766 /* Fallback to MSI if MSI-X initialization failed */
10767 if (cfg_mode >= 1 && phba->intr_type == NONE) {
10768 retval = lpfc_sli_enable_msi(phba);
10770 /* Indicate initialization to MSI mode */
10771 phba->intr_type = MSI;
10776 /* Fallback to INTx if both MSI-X/MSI initalization failed */
10777 if (phba->intr_type == NONE) {
10778 retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
10779 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
10781 /* Indicate initialization to INTx mode */
10782 phba->intr_type = INTx;
10790 * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
10791 * @phba: pointer to lpfc hba data structure.
10793 * This routine is invoked to disable device interrupt and disassociate the
10794 * driver's interrupt handler(s) from interrupt vector(s) to device with
10795 * SLI-3 interface spec. Depending on the interrupt mode, the driver will
10796 * release the interrupt vector(s) for the message signaled interrupt.
10799 lpfc_sli_disable_intr(struct lpfc_hba *phba)
10803 if (phba->intr_type == MSIX)
10804 nr_irqs = LPFC_MSIX_VECTORS;
10808 for (i = 0; i < nr_irqs; i++)
10809 free_irq(pci_irq_vector(phba->pcidev, i), phba);
10810 pci_free_irq_vectors(phba->pcidev);
10812 /* Reset interrupt management states */
10813 phba->intr_type = NONE;
10814 phba->sli.slistat.sli_intr = 0;
10818 * lpfc_find_cpu_handle - Find the CPU that corresponds to the specified Queue
10819 * @phba: pointer to lpfc hba data structure.
10820 * @id: EQ vector index or Hardware Queue index
10821 * @match: LPFC_FIND_BY_EQ = match by EQ
10822 * LPFC_FIND_BY_HDWQ = match by Hardware Queue
10823 * Return the CPU that matches the selection criteria
10826 lpfc_find_cpu_handle(struct lpfc_hba *phba, uint16_t id, int match)
10828 struct lpfc_vector_map_info *cpup;
10831 /* Loop through all CPUs */
10832 for_each_present_cpu(cpu) {
10833 cpup = &phba->sli4_hba.cpu_map[cpu];
10835 /* If we are matching by EQ, there may be multiple CPUs using
10836 * using the same vector, so select the one with
10837 * LPFC_CPU_FIRST_IRQ set.
10839 if ((match == LPFC_FIND_BY_EQ) &&
10840 (cpup->flag & LPFC_CPU_FIRST_IRQ) &&
10844 /* If matching by HDWQ, select the first CPU that matches */
10845 if ((match == LPFC_FIND_BY_HDWQ) && (cpup->hdwq == id))
10853 * lpfc_find_hyper - Determine if the CPU map entry is hyper-threaded
10854 * @phba: pointer to lpfc hba data structure.
10855 * @cpu: CPU map index
10856 * @phys_id: CPU package physical id
10857 * @core_id: CPU core id
10860 lpfc_find_hyper(struct lpfc_hba *phba, int cpu,
10861 uint16_t phys_id, uint16_t core_id)
10863 struct lpfc_vector_map_info *cpup;
10866 for_each_present_cpu(idx) {
10867 cpup = &phba->sli4_hba.cpu_map[idx];
10868 /* Does the cpup match the one we are looking for */
10869 if ((cpup->phys_id == phys_id) &&
10870 (cpup->core_id == core_id) &&
10879 * lpfc_assign_eq_map_info - Assigns eq for vector_map structure
10880 * @phba: pointer to lpfc hba data structure.
10881 * @eqidx: index for eq and irq vector
10882 * @flag: flags to set for vector_map structure
10883 * @cpu: cpu used to index vector_map structure
10885 * The routine assigns eq info into vector_map structure
10888 lpfc_assign_eq_map_info(struct lpfc_hba *phba, uint16_t eqidx, uint16_t flag,
10891 struct lpfc_vector_map_info *cpup = &phba->sli4_hba.cpu_map[cpu];
10892 struct lpfc_hba_eq_hdl *eqhdl = lpfc_get_eq_hdl(eqidx);
10895 cpup->flag |= flag;
10897 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
10898 "3336 Set Affinity: CPU %d irq %d eq %d flag x%x\n",
10899 cpu, eqhdl->irq, cpup->eq, cpup->flag);
10903 * lpfc_cpu_map_array_init - Initialize cpu_map structure
10904 * @phba: pointer to lpfc hba data structure.
10906 * The routine initializes the cpu_map array structure
10909 lpfc_cpu_map_array_init(struct lpfc_hba *phba)
10911 struct lpfc_vector_map_info *cpup;
10912 struct lpfc_eq_intr_info *eqi;
10915 for_each_possible_cpu(cpu) {
10916 cpup = &phba->sli4_hba.cpu_map[cpu];
10917 cpup->phys_id = LPFC_VECTOR_MAP_EMPTY;
10918 cpup->core_id = LPFC_VECTOR_MAP_EMPTY;
10919 cpup->hdwq = LPFC_VECTOR_MAP_EMPTY;
10920 cpup->eq = LPFC_VECTOR_MAP_EMPTY;
10922 eqi = per_cpu_ptr(phba->sli4_hba.eq_info, cpu);
10923 INIT_LIST_HEAD(&eqi->list);
10929 * lpfc_hba_eq_hdl_array_init - Initialize hba_eq_hdl structure
10930 * @phba: pointer to lpfc hba data structure.
10932 * The routine initializes the hba_eq_hdl array structure
10935 lpfc_hba_eq_hdl_array_init(struct lpfc_hba *phba)
10937 struct lpfc_hba_eq_hdl *eqhdl;
10940 for (i = 0; i < phba->cfg_irq_chann; i++) {
10941 eqhdl = lpfc_get_eq_hdl(i);
10942 eqhdl->irq = LPFC_VECTOR_MAP_EMPTY;
10943 eqhdl->phba = phba;
10948 * lpfc_cpu_affinity_check - Check vector CPU affinity mappings
10949 * @phba: pointer to lpfc hba data structure.
10950 * @vectors: number of msix vectors allocated.
10952 * The routine will figure out the CPU affinity assignment for every
10953 * MSI-X vector allocated for the HBA.
10954 * In addition, the CPU to IO channel mapping will be calculated
10955 * and the phba->sli4_hba.cpu_map array will reflect this.
10958 lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
10960 int i, cpu, idx, next_idx, new_cpu, start_cpu, first_cpu;
10961 int max_phys_id, min_phys_id;
10962 int max_core_id, min_core_id;
10963 struct lpfc_vector_map_info *cpup;
10964 struct lpfc_vector_map_info *new_cpup;
10966 struct cpuinfo_x86 *cpuinfo;
10968 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
10969 struct lpfc_hdwq_stat *c_stat;
10973 min_phys_id = LPFC_VECTOR_MAP_EMPTY;
10975 min_core_id = LPFC_VECTOR_MAP_EMPTY;
10977 /* Update CPU map with physical id and core id of each CPU */
10978 for_each_present_cpu(cpu) {
10979 cpup = &phba->sli4_hba.cpu_map[cpu];
10981 cpuinfo = &cpu_data(cpu);
10982 cpup->phys_id = cpuinfo->phys_proc_id;
10983 cpup->core_id = cpuinfo->cpu_core_id;
10984 if (lpfc_find_hyper(phba, cpu, cpup->phys_id, cpup->core_id))
10985 cpup->flag |= LPFC_CPU_MAP_HYPER;
10987 /* No distinction between CPUs for other platforms */
10989 cpup->core_id = cpu;
10992 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
10993 "3328 CPU %d physid %d coreid %d flag x%x\n",
10994 cpu, cpup->phys_id, cpup->core_id, cpup->flag);
10996 if (cpup->phys_id > max_phys_id)
10997 max_phys_id = cpup->phys_id;
10998 if (cpup->phys_id < min_phys_id)
10999 min_phys_id = cpup->phys_id;
11001 if (cpup->core_id > max_core_id)
11002 max_core_id = cpup->core_id;
11003 if (cpup->core_id < min_core_id)
11004 min_core_id = cpup->core_id;
11007 /* After looking at each irq vector assigned to this pcidev, its
11008 * possible to see that not ALL CPUs have been accounted for.
11009 * Next we will set any unassigned (unaffinitized) cpu map
11010 * entries to a IRQ on the same phys_id.
11012 first_cpu = cpumask_first(cpu_present_mask);
11013 start_cpu = first_cpu;
11015 for_each_present_cpu(cpu) {
11016 cpup = &phba->sli4_hba.cpu_map[cpu];
11018 /* Is this CPU entry unassigned */
11019 if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
11020 /* Mark CPU as IRQ not assigned by the kernel */
11021 cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
11023 /* If so, find a new_cpup thats on the the SAME
11024 * phys_id as cpup. start_cpu will start where we
11025 * left off so all unassigned entries don't get assgined
11026 * the IRQ of the first entry.
11028 new_cpu = start_cpu;
11029 for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
11030 new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
11031 if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) &&
11032 (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY) &&
11033 (new_cpup->phys_id == cpup->phys_id))
11035 new_cpu = cpumask_next(
11036 new_cpu, cpu_present_mask);
11037 if (new_cpu == nr_cpumask_bits)
11038 new_cpu = first_cpu;
11040 /* At this point, we leave the CPU as unassigned */
11043 /* We found a matching phys_id, so copy the IRQ info */
11044 cpup->eq = new_cpup->eq;
11046 /* Bump start_cpu to the next slot to minmize the
11047 * chance of having multiple unassigned CPU entries
11048 * selecting the same IRQ.
11050 start_cpu = cpumask_next(new_cpu, cpu_present_mask);
11051 if (start_cpu == nr_cpumask_bits)
11052 start_cpu = first_cpu;
11054 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11055 "3337 Set Affinity: CPU %d "
11056 "eq %d from peer cpu %d same "
11058 cpu, cpup->eq, new_cpu,
11063 /* Set any unassigned cpu map entries to a IRQ on any phys_id */
11064 start_cpu = first_cpu;
11066 for_each_present_cpu(cpu) {
11067 cpup = &phba->sli4_hba.cpu_map[cpu];
11069 /* Is this entry unassigned */
11070 if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
11071 /* Mark it as IRQ not assigned by the kernel */
11072 cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
11074 /* If so, find a new_cpup thats on ANY phys_id
11075 * as the cpup. start_cpu will start where we
11076 * left off so all unassigned entries don't get
11077 * assigned the IRQ of the first entry.
11079 new_cpu = start_cpu;
11080 for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
11081 new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
11082 if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) &&
11083 (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY))
11085 new_cpu = cpumask_next(
11086 new_cpu, cpu_present_mask);
11087 if (new_cpu == nr_cpumask_bits)
11088 new_cpu = first_cpu;
11090 /* We should never leave an entry unassigned */
11091 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
11092 "3339 Set Affinity: CPU %d "
11093 "eq %d UNASSIGNED\n",
11094 cpup->hdwq, cpup->eq);
11097 /* We found an available entry, copy the IRQ info */
11098 cpup->eq = new_cpup->eq;
11100 /* Bump start_cpu to the next slot to minmize the
11101 * chance of having multiple unassigned CPU entries
11102 * selecting the same IRQ.
11104 start_cpu = cpumask_next(new_cpu, cpu_present_mask);
11105 if (start_cpu == nr_cpumask_bits)
11106 start_cpu = first_cpu;
11108 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11109 "3338 Set Affinity: CPU %d "
11110 "eq %d from peer cpu %d (%d/%d)\n",
11111 cpu, cpup->eq, new_cpu,
11112 new_cpup->phys_id, new_cpup->core_id);
11116 /* Assign hdwq indices that are unique across all cpus in the map
11117 * that are also FIRST_CPUs.
11120 for_each_present_cpu(cpu) {
11121 cpup = &phba->sli4_hba.cpu_map[cpu];
11123 /* Only FIRST IRQs get a hdwq index assignment. */
11124 if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
11127 /* 1 to 1, the first LPFC_CPU_FIRST_IRQ cpus to a unique hdwq */
11130 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11131 "3333 Set Affinity: CPU %d (phys %d core %d): "
11132 "hdwq %d eq %d flg x%x\n",
11133 cpu, cpup->phys_id, cpup->core_id,
11134 cpup->hdwq, cpup->eq, cpup->flag);
11136 /* Associate a hdwq with each cpu_map entry
11137 * This will be 1 to 1 - hdwq to cpu, unless there are less
11138 * hardware queues then CPUs. For that case we will just round-robin
11139 * the available hardware queues as they get assigned to CPUs.
11140 * The next_idx is the idx from the FIRST_CPU loop above to account
11141 * for irq_chann < hdwq. The idx is used for round-robin assignments
11142 * and needs to start at 0.
11147 for_each_present_cpu(cpu) {
11148 cpup = &phba->sli4_hba.cpu_map[cpu];
11150 /* FIRST cpus are already mapped. */
11151 if (cpup->flag & LPFC_CPU_FIRST_IRQ)
11154 /* If the cfg_irq_chann < cfg_hdw_queue, set the hdwq
11155 * of the unassigned cpus to the next idx so that all
11156 * hdw queues are fully utilized.
11158 if (next_idx < phba->cfg_hdw_queue) {
11159 cpup->hdwq = next_idx;
11164 /* Not a First CPU and all hdw_queues are used. Reuse a
11165 * Hardware Queue for another CPU, so be smart about it
11166 * and pick one that has its IRQ/EQ mapped to the same phys_id
11167 * (CPU package) and core_id.
11169 new_cpu = start_cpu;
11170 for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
11171 new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
11172 if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY &&
11173 new_cpup->phys_id == cpup->phys_id &&
11174 new_cpup->core_id == cpup->core_id) {
11177 new_cpu = cpumask_next(new_cpu, cpu_present_mask);
11178 if (new_cpu == nr_cpumask_bits)
11179 new_cpu = first_cpu;
11182 /* If we can't match both phys_id and core_id,
11183 * settle for just a phys_id match.
11185 new_cpu = start_cpu;
11186 for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
11187 new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
11188 if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY &&
11189 new_cpup->phys_id == cpup->phys_id)
11192 new_cpu = cpumask_next(new_cpu, cpu_present_mask);
11193 if (new_cpu == nr_cpumask_bits)
11194 new_cpu = first_cpu;
11197 /* Otherwise just round robin on cfg_hdw_queue */
11198 cpup->hdwq = idx % phba->cfg_hdw_queue;
11202 /* We found an available entry, copy the IRQ info */
11203 start_cpu = cpumask_next(new_cpu, cpu_present_mask);
11204 if (start_cpu == nr_cpumask_bits)
11205 start_cpu = first_cpu;
11206 cpup->hdwq = new_cpup->hdwq;
11208 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11209 "3335 Set Affinity: CPU %d (phys %d core %d): "
11210 "hdwq %d eq %d flg x%x\n",
11211 cpu, cpup->phys_id, cpup->core_id,
11212 cpup->hdwq, cpup->eq, cpup->flag);
11216 * Initialize the cpu_map slots for not-present cpus in case
11217 * a cpu is hot-added. Perform a simple hdwq round robin assignment.
11220 for_each_possible_cpu(cpu) {
11221 cpup = &phba->sli4_hba.cpu_map[cpu];
11222 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
11223 c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, cpu);
11224 c_stat->hdwq_no = cpup->hdwq;
11226 if (cpup->hdwq != LPFC_VECTOR_MAP_EMPTY)
11229 cpup->hdwq = idx++ % phba->cfg_hdw_queue;
11230 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
11231 c_stat->hdwq_no = cpup->hdwq;
11233 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11234 "3340 Set Affinity: not present "
11235 "CPU %d hdwq %d\n",
11239 /* The cpu_map array will be used later during initialization
11240 * when EQ / CQ / WQs are allocated and configured.
11246 * lpfc_cpuhp_get_eq
11248 * @phba: pointer to lpfc hba data structure.
11249 * @cpu: cpu going offline
11250 * @eqlist: eq list to append to
11253 lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
11254 struct list_head *eqlist)
11256 const struct cpumask *maskp;
11257 struct lpfc_queue *eq;
11258 struct cpumask *tmp;
11261 tmp = kzalloc(cpumask_size(), GFP_KERNEL);
11265 for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
11266 maskp = pci_irq_get_affinity(phba->pcidev, idx);
11270 * if irq is not affinitized to the cpu going
11271 * then we don't need to poll the eq attached
11274 if (!cpumask_and(tmp, maskp, cpumask_of(cpu)))
11276 /* get the cpus that are online and are affini-
11277 * tized to this irq vector. If the count is
11278 * more than 1 then cpuhp is not going to shut-
11279 * down this vector. Since this cpu has not
11280 * gone offline yet, we need >1.
11282 cpumask_and(tmp, maskp, cpu_online_mask);
11283 if (cpumask_weight(tmp) > 1)
11286 /* Now that we have an irq to shutdown, get the eq
11287 * mapped to this irq. Note: multiple hdwq's in
11288 * the software can share an eq, but eventually
11289 * only eq will be mapped to this vector
11291 eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
11292 list_add(&eq->_poll_list, eqlist);
11298 static void __lpfc_cpuhp_remove(struct lpfc_hba *phba)
11300 if (phba->sli_rev != LPFC_SLI_REV4)
11303 cpuhp_state_remove_instance_nocalls(lpfc_cpuhp_state,
11306 * unregistering the instance doesn't stop the polling
11307 * timer. Wait for the poll timer to retire.
11310 del_timer_sync(&phba->cpuhp_poll_timer);
11313 static void lpfc_cpuhp_remove(struct lpfc_hba *phba)
11315 if (phba->pport->fc_flag & FC_OFFLINE_MODE)
11318 __lpfc_cpuhp_remove(phba);
11321 static void lpfc_cpuhp_add(struct lpfc_hba *phba)
11323 if (phba->sli_rev != LPFC_SLI_REV4)
11328 if (!list_empty(&phba->poll_list))
11329 mod_timer(&phba->cpuhp_poll_timer,
11330 jiffies + msecs_to_jiffies(LPFC_POLL_HB));
11334 cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state,
11338 static int __lpfc_cpuhp_checks(struct lpfc_hba *phba, int *retval)
11340 if (phba->pport->load_flag & FC_UNLOADING) {
11345 if (phba->sli_rev != LPFC_SLI_REV4) {
11350 /* proceed with the hotplug */
11355 * lpfc_irq_set_aff - set IRQ affinity
11356 * @eqhdl: EQ handle
11357 * @cpu: cpu to set affinity
11361 lpfc_irq_set_aff(struct lpfc_hba_eq_hdl *eqhdl, unsigned int cpu)
11363 cpumask_clear(&eqhdl->aff_mask);
11364 cpumask_set_cpu(cpu, &eqhdl->aff_mask);
11365 irq_set_status_flags(eqhdl->irq, IRQ_NO_BALANCING);
11366 irq_set_affinity_hint(eqhdl->irq, &eqhdl->aff_mask);
11370 * lpfc_irq_clear_aff - clear IRQ affinity
11371 * @eqhdl: EQ handle
11375 lpfc_irq_clear_aff(struct lpfc_hba_eq_hdl *eqhdl)
11377 cpumask_clear(&eqhdl->aff_mask);
11378 irq_clear_status_flags(eqhdl->irq, IRQ_NO_BALANCING);
11382 * lpfc_irq_rebalance - rebalances IRQ affinity according to cpuhp event
11383 * @phba: pointer to HBA context object.
11384 * @cpu: cpu going offline/online
11385 * @offline: true, cpu is going offline. false, cpu is coming online.
11387 * If cpu is going offline, we'll try our best effort to find the next
11388 * online cpu on the phba's original_mask and migrate all offlining IRQ
11391 * If cpu is coming online, reaffinitize the IRQ back to the onlining cpu.
11393 * Note: Call only if NUMA or NHT mode is enabled, otherwise rely on
11394 * PCI_IRQ_AFFINITY to auto-manage IRQ affinity.
11398 lpfc_irq_rebalance(struct lpfc_hba *phba, unsigned int cpu, bool offline)
11400 struct lpfc_vector_map_info *cpup;
11401 struct cpumask *aff_mask;
11402 unsigned int cpu_select, cpu_next, idx;
11403 const struct cpumask *orig_mask;
11405 if (phba->irq_chann_mode == NORMAL_MODE)
11408 orig_mask = &phba->sli4_hba.irq_aff_mask;
11410 if (!cpumask_test_cpu(cpu, orig_mask))
11413 cpup = &phba->sli4_hba.cpu_map[cpu];
11415 if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
11419 /* Find next online CPU on original mask */
11420 cpu_next = cpumask_next_wrap(cpu, orig_mask, cpu, true);
11421 cpu_select = lpfc_next_online_cpu(orig_mask, cpu_next);
11423 /* Found a valid CPU */
11424 if ((cpu_select < nr_cpu_ids) && (cpu_select != cpu)) {
11425 /* Go through each eqhdl and ensure offlining
11426 * cpu aff_mask is migrated
11428 for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
11429 aff_mask = lpfc_get_aff_mask(idx);
11431 /* Migrate affinity */
11432 if (cpumask_test_cpu(cpu, aff_mask))
11433 lpfc_irq_set_aff(lpfc_get_eq_hdl(idx),
11437 /* Rely on irqbalance if no online CPUs left on NUMA */
11438 for (idx = 0; idx < phba->cfg_irq_chann; idx++)
11439 lpfc_irq_clear_aff(lpfc_get_eq_hdl(idx));
11442 /* Migrate affinity back to this CPU */
11443 lpfc_irq_set_aff(lpfc_get_eq_hdl(cpup->eq), cpu);
11447 static int lpfc_cpu_offline(unsigned int cpu, struct hlist_node *node)
11449 struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp);
11450 struct lpfc_queue *eq, *next;
11455 WARN_ONCE(!phba, "cpu: %u. phba:NULL", raw_smp_processor_id());
11459 if (__lpfc_cpuhp_checks(phba, &retval))
11462 lpfc_irq_rebalance(phba, cpu, true);
11464 retval = lpfc_cpuhp_get_eq(phba, cpu, &eqlist);
11468 /* start polling on these eq's */
11469 list_for_each_entry_safe(eq, next, &eqlist, _poll_list) {
11470 list_del_init(&eq->_poll_list);
11471 lpfc_sli4_start_polling(eq);
11477 static int lpfc_cpu_online(unsigned int cpu, struct hlist_node *node)
11479 struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp);
11480 struct lpfc_queue *eq, *next;
11485 WARN_ONCE(!phba, "cpu: %u. phba:NULL", raw_smp_processor_id());
11489 if (__lpfc_cpuhp_checks(phba, &retval))
11492 lpfc_irq_rebalance(phba, cpu, false);
11494 list_for_each_entry_safe(eq, next, &phba->poll_list, _poll_list) {
11495 n = lpfc_find_cpu_handle(phba, eq->hdwq, LPFC_FIND_BY_HDWQ);
11497 lpfc_sli4_stop_polling(eq);
11504 * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
11505 * @phba: pointer to lpfc hba data structure.
11507 * This routine is invoked to enable the MSI-X interrupt vectors to device
11508 * with SLI-4 interface spec. It also allocates MSI-X vectors and maps them
11509 * to cpus on the system.
11511 * When cfg_irq_numa is enabled, the adapter will only allocate vectors for
11512 * the number of cpus on the same numa node as this adapter. The vectors are
11513 * allocated without requesting OS affinity mapping. A vector will be
11514 * allocated and assigned to each online and offline cpu. If the cpu is
11515 * online, then affinity will be set to that cpu. If the cpu is offline, then
11516 * affinity will be set to the nearest peer cpu within the numa node that is
11517 * online. If there are no online cpus within the numa node, affinity is not
11518 * assigned and the OS may do as it pleases. Note: cpu vector affinity mapping
11519 * is consistent with the way cpu online/offline is handled when cfg_irq_numa is
11522 * If numa mode is not enabled and there is more than 1 vector allocated, then
11523 * the driver relies on the managed irq interface where the OS assigns vector to
11524 * cpu affinity. The driver will then use that affinity mapping to setup its
11525 * cpu mapping table.
11529 * other values - error
11532 lpfc_sli4_enable_msix(struct lpfc_hba *phba)
11534 int vectors, rc, index;
11536 const struct cpumask *aff_mask = NULL;
11537 unsigned int cpu = 0, cpu_cnt = 0, cpu_select = nr_cpu_ids;
11538 struct lpfc_vector_map_info *cpup;
11539 struct lpfc_hba_eq_hdl *eqhdl;
11540 const struct cpumask *maskp;
11541 unsigned int flags = PCI_IRQ_MSIX;
11543 /* Set up MSI-X multi-message vectors */
11544 vectors = phba->cfg_irq_chann;
11546 if (phba->irq_chann_mode != NORMAL_MODE)
11547 aff_mask = &phba->sli4_hba.irq_aff_mask;
11550 cpu_cnt = cpumask_weight(aff_mask);
11551 vectors = min(phba->cfg_irq_chann, cpu_cnt);
11553 /* cpu: iterates over aff_mask including offline or online
11554 * cpu_select: iterates over online aff_mask to set affinity
11556 cpu = cpumask_first(aff_mask);
11557 cpu_select = lpfc_next_online_cpu(aff_mask, cpu);
11559 flags |= PCI_IRQ_AFFINITY;
11562 rc = pci_alloc_irq_vectors(phba->pcidev, 1, vectors, flags);
11564 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11565 "0484 PCI enable MSI-X failed (%d)\n", rc);
11570 /* Assign MSI-X vectors to interrupt handlers */
11571 for (index = 0; index < vectors; index++) {
11572 eqhdl = lpfc_get_eq_hdl(index);
11573 name = eqhdl->handler_name;
11574 memset(name, 0, LPFC_SLI4_HANDLER_NAME_SZ);
11575 snprintf(name, LPFC_SLI4_HANDLER_NAME_SZ,
11576 LPFC_DRIVER_HANDLER_NAME"%d", index);
11578 eqhdl->idx = index;
11579 rc = request_irq(pci_irq_vector(phba->pcidev, index),
11580 &lpfc_sli4_hba_intr_handler, 0,
11583 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
11584 "0486 MSI-X fast-path (%d) "
11585 "request_irq failed (%d)\n", index, rc);
11589 eqhdl->irq = pci_irq_vector(phba->pcidev, index);
11592 /* If found a neighboring online cpu, set affinity */
11593 if (cpu_select < nr_cpu_ids)
11594 lpfc_irq_set_aff(eqhdl, cpu_select);
11596 /* Assign EQ to cpu_map */
11597 lpfc_assign_eq_map_info(phba, index,
11598 LPFC_CPU_FIRST_IRQ,
11601 /* Iterate to next offline or online cpu in aff_mask */
11602 cpu = cpumask_next(cpu, aff_mask);
11604 /* Find next online cpu in aff_mask to set affinity */
11605 cpu_select = lpfc_next_online_cpu(aff_mask, cpu);
11606 } else if (vectors == 1) {
11607 cpu = cpumask_first(cpu_present_mask);
11608 lpfc_assign_eq_map_info(phba, index, LPFC_CPU_FIRST_IRQ,
11611 maskp = pci_irq_get_affinity(phba->pcidev, index);
11613 /* Loop through all CPUs associated with vector index */
11614 for_each_cpu_and(cpu, maskp, cpu_present_mask) {
11615 cpup = &phba->sli4_hba.cpu_map[cpu];
11617 /* If this is the first CPU thats assigned to
11618 * this vector, set LPFC_CPU_FIRST_IRQ.
11620 * With certain platforms its possible that irq
11621 * vectors are affinitized to all the cpu's.
11622 * This can result in each cpu_map.eq to be set
11623 * to the last vector, resulting in overwrite
11624 * of all the previous cpu_map.eq. Ensure that
11625 * each vector receives a place in cpu_map.
11626 * Later call to lpfc_cpu_affinity_check will
11627 * ensure we are nicely balanced out.
11629 if (cpup->eq != LPFC_VECTOR_MAP_EMPTY)
11631 lpfc_assign_eq_map_info(phba, index,
11632 LPFC_CPU_FIRST_IRQ,
11639 if (vectors != phba->cfg_irq_chann) {
11640 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
11641 "3238 Reducing IO channels to match number of "
11642 "MSI-X vectors, requested %d got %d\n",
11643 phba->cfg_irq_chann, vectors);
11644 if (phba->cfg_irq_chann > vectors)
11645 phba->cfg_irq_chann = vectors;
11651 /* free the irq already requested */
11652 for (--index; index >= 0; index--) {
11653 eqhdl = lpfc_get_eq_hdl(index);
11654 lpfc_irq_clear_aff(eqhdl);
11655 irq_set_affinity_hint(eqhdl->irq, NULL);
11656 free_irq(eqhdl->irq, eqhdl);
11659 /* Unconfigure MSI-X capability structure */
11660 pci_free_irq_vectors(phba->pcidev);
11667 * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
11668 * @phba: pointer to lpfc hba data structure.
11670 * This routine is invoked to enable the MSI interrupt mode to device with
11671 * SLI-4 interface spec. The kernel function pci_alloc_irq_vectors() is
11672 * called to enable the MSI vector. The device driver is responsible for
11673 * calling the request_irq() to register MSI vector with a interrupt the
11674 * handler, which is done in this function.
11678 * other values - error
11681 lpfc_sli4_enable_msi(struct lpfc_hba *phba)
11685 struct lpfc_hba_eq_hdl *eqhdl;
11687 rc = pci_alloc_irq_vectors(phba->pcidev, 1, 1,
11688 PCI_IRQ_MSI | PCI_IRQ_AFFINITY);
11690 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11691 "0487 PCI enable MSI mode success.\n");
11693 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
11694 "0488 PCI enable MSI mode failed (%d)\n", rc);
11695 return rc ? rc : -1;
11698 rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
11699 0, LPFC_DRIVER_NAME, phba);
11701 pci_free_irq_vectors(phba->pcidev);
11702 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
11703 "0490 MSI request_irq failed (%d)\n", rc);
11707 eqhdl = lpfc_get_eq_hdl(0);
11708 eqhdl->irq = pci_irq_vector(phba->pcidev, 0);
11710 cpu = cpumask_first(cpu_present_mask);
11711 lpfc_assign_eq_map_info(phba, 0, LPFC_CPU_FIRST_IRQ, cpu);
11713 for (index = 0; index < phba->cfg_irq_chann; index++) {
11714 eqhdl = lpfc_get_eq_hdl(index);
11715 eqhdl->idx = index;
11722 * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
11723 * @phba: pointer to lpfc hba data structure.
11724 * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X).
11726 * This routine is invoked to enable device interrupt and associate driver's
11727 * interrupt handler(s) to interrupt vector(s) to device with SLI-4
11728 * interface spec. Depends on the interrupt mode configured to the driver,
11729 * the driver will try to fallback from the configured interrupt mode to an
11730 * interrupt mode which is supported by the platform, kernel, and device in
11732 * MSI-X -> MSI -> IRQ.
11736 * other values - error
11739 lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
11741 uint32_t intr_mode = LPFC_INTR_ERROR;
11744 if (cfg_mode == 2) {
11745 /* Preparation before conf_msi mbox cmd */
11748 /* Now, try to enable MSI-X interrupt mode */
11749 retval = lpfc_sli4_enable_msix(phba);
11751 /* Indicate initialization to MSI-X mode */
11752 phba->intr_type = MSIX;
11758 /* Fallback to MSI if MSI-X initialization failed */
11759 if (cfg_mode >= 1 && phba->intr_type == NONE) {
11760 retval = lpfc_sli4_enable_msi(phba);
11762 /* Indicate initialization to MSI mode */
11763 phba->intr_type = MSI;
11768 /* Fallback to INTx if both MSI-X/MSI initalization failed */
11769 if (phba->intr_type == NONE) {
11770 retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
11771 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
11773 struct lpfc_hba_eq_hdl *eqhdl;
11776 /* Indicate initialization to INTx mode */
11777 phba->intr_type = INTx;
11780 eqhdl = lpfc_get_eq_hdl(0);
11781 eqhdl->irq = pci_irq_vector(phba->pcidev, 0);
11783 cpu = cpumask_first(cpu_present_mask);
11784 lpfc_assign_eq_map_info(phba, 0, LPFC_CPU_FIRST_IRQ,
11786 for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
11787 eqhdl = lpfc_get_eq_hdl(idx);
11796 * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
11797 * @phba: pointer to lpfc hba data structure.
11799 * This routine is invoked to disable device interrupt and disassociate
11800 * the driver's interrupt handler(s) from interrupt vector(s) to device
11801 * with SLI-4 interface spec. Depending on the interrupt mode, the driver
11802 * will release the interrupt vector(s) for the message signaled interrupt.
11805 lpfc_sli4_disable_intr(struct lpfc_hba *phba)
11807 /* Disable the currently initialized interrupt mode */
11808 if (phba->intr_type == MSIX) {
11810 struct lpfc_hba_eq_hdl *eqhdl;
11812 /* Free up MSI-X multi-message vectors */
11813 for (index = 0; index < phba->cfg_irq_chann; index++) {
11814 eqhdl = lpfc_get_eq_hdl(index);
11815 lpfc_irq_clear_aff(eqhdl);
11816 irq_set_affinity_hint(eqhdl->irq, NULL);
11817 free_irq(eqhdl->irq, eqhdl);
11820 free_irq(phba->pcidev->irq, phba);
11823 pci_free_irq_vectors(phba->pcidev);
11825 /* Reset interrupt management states */
11826 phba->intr_type = NONE;
11827 phba->sli.slistat.sli_intr = 0;
11831 * lpfc_unset_hba - Unset SLI3 hba device initialization
11832 * @phba: pointer to lpfc hba data structure.
11834 * This routine is invoked to unset the HBA device initialization steps to
11835 * a device with SLI-3 interface spec.
11838 lpfc_unset_hba(struct lpfc_hba *phba)
11840 struct lpfc_vport *vport = phba->pport;
11841 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
11843 spin_lock_irq(shost->host_lock);
11844 vport->load_flag |= FC_UNLOADING;
11845 spin_unlock_irq(shost->host_lock);
11847 kfree(phba->vpi_bmask);
11848 kfree(phba->vpi_ids);
11850 lpfc_stop_hba_timers(phba);
11852 phba->pport->work_port_events = 0;
11854 lpfc_sli_hba_down(phba);
11856 lpfc_sli_brdrestart(phba);
11858 lpfc_sli_disable_intr(phba);
11864 * lpfc_sli4_xri_exchange_busy_wait - Wait for device XRI exchange busy
11865 * @phba: Pointer to HBA context object.
11867 * This function is called in the SLI4 code path to wait for completion
11868 * of device's XRIs exchange busy. It will check the XRI exchange busy
11869 * on outstanding FCP and ELS I/Os every 10ms for up to 10 seconds; after
11870 * that, it will check the XRI exchange busy on outstanding FCP and ELS
11871 * I/Os every 30 seconds, log error message, and wait forever. Only when
11872 * all XRI exchange busy complete, the driver unload shall proceed with
11873 * invoking the function reset ioctl mailbox command to the CNA and the
11874 * the rest of the driver unload resource release.
11877 lpfc_sli4_xri_exchange_busy_wait(struct lpfc_hba *phba)
11879 struct lpfc_sli4_hdw_queue *qp;
11882 int io_xri_cmpl = 1;
11883 int nvmet_xri_cmpl = 1;
11884 int els_xri_cmpl = list_empty(&phba->sli4_hba.lpfc_abts_els_sgl_list);
11886 /* Driver just aborted IOs during the hba_unset process. Pause
11887 * here to give the HBA time to complete the IO and get entries
11888 * into the abts lists.
11890 msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1 * 5);
11892 /* Wait for NVME pending IO to flush back to transport. */
11893 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
11894 lpfc_nvme_wait_for_io_drain(phba);
11897 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
11898 qp = &phba->sli4_hba.hdwq[idx];
11899 io_xri_cmpl = list_empty(&qp->lpfc_abts_io_buf_list);
11900 if (!io_xri_cmpl) /* if list is NOT empty */
11906 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
11908 list_empty(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
11911 while (!els_xri_cmpl || !io_xri_cmpl || !nvmet_xri_cmpl) {
11912 if (wait_time > LPFC_XRI_EXCH_BUSY_WAIT_TMO) {
11913 if (!nvmet_xri_cmpl)
11914 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
11915 "6424 NVMET XRI exchange busy "
11916 "wait time: %d seconds.\n",
11919 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
11920 "6100 IO XRI exchange busy "
11921 "wait time: %d seconds.\n",
11924 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
11925 "2878 ELS XRI exchange busy "
11926 "wait time: %d seconds.\n",
11928 msleep(LPFC_XRI_EXCH_BUSY_WAIT_T2);
11929 wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T2;
11931 msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1);
11932 wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T1;
11936 for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
11937 qp = &phba->sli4_hba.hdwq[idx];
11938 io_xri_cmpl = list_empty(
11939 &qp->lpfc_abts_io_buf_list);
11940 if (!io_xri_cmpl) /* if list is NOT empty */
11946 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
11947 nvmet_xri_cmpl = list_empty(
11948 &phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
11951 list_empty(&phba->sli4_hba.lpfc_abts_els_sgl_list);
11957 * lpfc_sli4_hba_unset - Unset the fcoe hba
11958 * @phba: Pointer to HBA context object.
11960 * This function is called in the SLI4 code path to reset the HBA's FCoE
11961 * function. The caller is not required to hold any lock. This routine
11962 * issues PCI function reset mailbox command to reset the FCoE function.
11963 * At the end of the function, it calls lpfc_hba_down_post function to
11964 * free any pending commands.
11967 lpfc_sli4_hba_unset(struct lpfc_hba *phba)
11970 LPFC_MBOXQ_t *mboxq;
11971 struct pci_dev *pdev = phba->pcidev;
11973 lpfc_stop_hba_timers(phba);
11975 phba->sli4_hba.intr_enable = 0;
11978 * Gracefully wait out the potential current outstanding asynchronous
11982 /* First, block any pending async mailbox command from posted */
11983 spin_lock_irq(&phba->hbalock);
11984 phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
11985 spin_unlock_irq(&phba->hbalock);
11986 /* Now, trying to wait it out if we can */
11987 while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
11989 if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
11992 /* Forcefully release the outstanding mailbox command if timed out */
11993 if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
11994 spin_lock_irq(&phba->hbalock);
11995 mboxq = phba->sli.mbox_active;
11996 mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
11997 __lpfc_mbox_cmpl_put(phba, mboxq);
11998 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
11999 phba->sli.mbox_active = NULL;
12000 spin_unlock_irq(&phba->hbalock);
12003 /* Abort all iocbs associated with the hba */
12004 lpfc_sli_hba_iocb_abort(phba);
12006 /* Wait for completion of device XRI exchange busy */
12007 lpfc_sli4_xri_exchange_busy_wait(phba);
12009 /* per-phba callback de-registration for hotplug event */
12011 lpfc_cpuhp_remove(phba);
12013 /* Disable PCI subsystem interrupt */
12014 lpfc_sli4_disable_intr(phba);
12016 /* Disable SR-IOV if enabled */
12017 if (phba->cfg_sriov_nr_virtfn)
12018 pci_disable_sriov(pdev);
12020 /* Stop kthread signal shall trigger work_done one more time */
12021 kthread_stop(phba->worker_thread);
12023 /* Disable FW logging to host memory */
12024 lpfc_ras_stop_fwlog(phba);
12026 /* Unset the queues shared with the hardware then release all
12027 * allocated resources.
12029 lpfc_sli4_queue_unset(phba);
12030 lpfc_sli4_queue_destroy(phba);
12032 /* Reset SLI4 HBA FCoE function */
12033 lpfc_pci_function_reset(phba);
12035 /* Free RAS DMA memory */
12036 if (phba->ras_fwlog.ras_enabled)
12037 lpfc_sli4_ras_dma_free(phba);
12039 /* Stop the SLI4 device port */
12041 phba->pport->work_port_events = 0;
12045 * lpfc_pc_sli4_params_get - Get the SLI4_PARAMS port capabilities.
12046 * @phba: Pointer to HBA context object.
12047 * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
12049 * This function is called in the SLI4 code path to read the port's
12050 * sli4 capabilities.
12052 * This function may be be called from any context that can block-wait
12053 * for the completion. The expectation is that this routine is called
12054 * typically from probe_one or from the online routine.
12057 lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
12060 struct lpfc_mqe *mqe;
12061 struct lpfc_pc_sli4_params *sli4_params;
12065 mqe = &mboxq->u.mqe;
12067 /* Read the port's SLI4 Parameters port capabilities */
12068 lpfc_pc_sli4_params(mboxq);
12069 if (!phba->sli4_hba.intr_enable)
12070 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
12072 mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
12073 rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
12079 sli4_params = &phba->sli4_hba.pc_sli4_params;
12080 sli4_params->if_type = bf_get(if_type, &mqe->un.sli4_params);
12081 sli4_params->sli_rev = bf_get(sli_rev, &mqe->un.sli4_params);
12082 sli4_params->sli_family = bf_get(sli_family, &mqe->un.sli4_params);
12083 sli4_params->featurelevel_1 = bf_get(featurelevel_1,
12084 &mqe->un.sli4_params);
12085 sli4_params->featurelevel_2 = bf_get(featurelevel_2,
12086 &mqe->un.sli4_params);
12087 sli4_params->proto_types = mqe->un.sli4_params.word3;
12088 sli4_params->sge_supp_len = mqe->un.sli4_params.sge_supp_len;
12089 sli4_params->if_page_sz = bf_get(if_page_sz, &mqe->un.sli4_params);
12090 sli4_params->rq_db_window = bf_get(rq_db_window, &mqe->un.sli4_params);
12091 sli4_params->loopbk_scope = bf_get(loopbk_scope, &mqe->un.sli4_params);
12092 sli4_params->eq_pages_max = bf_get(eq_pages, &mqe->un.sli4_params);
12093 sli4_params->eqe_size = bf_get(eqe_size, &mqe->un.sli4_params);
12094 sli4_params->cq_pages_max = bf_get(cq_pages, &mqe->un.sli4_params);
12095 sli4_params->cqe_size = bf_get(cqe_size, &mqe->un.sli4_params);
12096 sli4_params->mq_pages_max = bf_get(mq_pages, &mqe->un.sli4_params);
12097 sli4_params->mqe_size = bf_get(mqe_size, &mqe->un.sli4_params);
12098 sli4_params->mq_elem_cnt = bf_get(mq_elem_cnt, &mqe->un.sli4_params);
12099 sli4_params->wq_pages_max = bf_get(wq_pages, &mqe->un.sli4_params);
12100 sli4_params->wqe_size = bf_get(wqe_size, &mqe->un.sli4_params);
12101 sli4_params->rq_pages_max = bf_get(rq_pages, &mqe->un.sli4_params);
12102 sli4_params->rqe_size = bf_get(rqe_size, &mqe->un.sli4_params);
12103 sli4_params->hdr_pages_max = bf_get(hdr_pages, &mqe->un.sli4_params);
12104 sli4_params->hdr_size = bf_get(hdr_size, &mqe->un.sli4_params);
12105 sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params);
12106 sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params);
12107 sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params);
12109 /* Make sure that sge_supp_len can be handled by the driver */
12110 if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
12111 sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
12117 * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS.
12118 * @phba: Pointer to HBA context object.
12119 * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
12121 * This function is called in the SLI4 code path to read the port's
12122 * sli4 capabilities.
12124 * This function may be be called from any context that can block-wait
12125 * for the completion. The expectation is that this routine is called
12126 * typically from probe_one or from the online routine.
12129 lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
12132 struct lpfc_mqe *mqe = &mboxq->u.mqe;
12133 struct lpfc_pc_sli4_params *sli4_params;
12136 bool exp_wqcq_pages = true;
12137 struct lpfc_sli4_parameters *mbx_sli4_parameters;
12140 * By default, the driver assumes the SLI4 port requires RPI
12141 * header postings. The SLI4_PARAM response will correct this
12144 phba->sli4_hba.rpi_hdrs_in_use = 1;
12146 /* Read the port's SLI4 Config Parameters */
12147 length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
12148 sizeof(struct lpfc_sli4_cfg_mhdr));
12149 lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
12150 LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS,
12151 length, LPFC_SLI4_MBX_EMBED);
12152 if (!phba->sli4_hba.intr_enable)
12153 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
12155 mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
12156 rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
12160 sli4_params = &phba->sli4_hba.pc_sli4_params;
12161 mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
12162 sli4_params->if_type = bf_get(cfg_if_type, mbx_sli4_parameters);
12163 sli4_params->sli_rev = bf_get(cfg_sli_rev, mbx_sli4_parameters);
12164 sli4_params->sli_family = bf_get(cfg_sli_family, mbx_sli4_parameters);
12165 sli4_params->featurelevel_1 = bf_get(cfg_sli_hint_1,
12166 mbx_sli4_parameters);
12167 sli4_params->featurelevel_2 = bf_get(cfg_sli_hint_2,
12168 mbx_sli4_parameters);
12169 if (bf_get(cfg_phwq, mbx_sli4_parameters))
12170 phba->sli3_options |= LPFC_SLI4_PHWQ_ENABLED;
12172 phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED;
12173 sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len;
12174 sli4_params->loopbk_scope = bf_get(loopbk_scope, mbx_sli4_parameters);
12175 sli4_params->oas_supported = bf_get(cfg_oas, mbx_sli4_parameters);
12176 sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters);
12177 sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
12178 sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
12179 sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
12180 sli4_params->eqav = bf_get(cfg_eqav, mbx_sli4_parameters);
12181 sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters);
12182 sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters);
12183 sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters);
12184 sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters);
12185 sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
12186 mbx_sli4_parameters);
12187 sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters);
12188 sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
12189 mbx_sli4_parameters);
12190 phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
12191 phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
12193 /* Check for Extended Pre-Registered SGL support */
12194 phba->cfg_xpsgl = bf_get(cfg_xpsgl, mbx_sli4_parameters);
12196 /* Check for firmware nvme support */
12197 rc = (bf_get(cfg_nvme, mbx_sli4_parameters) &&
12198 bf_get(cfg_xib, mbx_sli4_parameters));
12201 /* Save this to indicate the Firmware supports NVME */
12202 sli4_params->nvme = 1;
12204 /* Firmware NVME support, check driver FC4 NVME support */
12205 if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) {
12206 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
12207 "6133 Disabling NVME support: "
12208 "FC4 type not supported: x%x\n",
12209 phba->cfg_enable_fc4_type);
12213 /* No firmware NVME support, check driver FC4 NVME support */
12214 sli4_params->nvme = 0;
12215 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
12216 lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME,
12217 "6101 Disabling NVME support: Not "
12218 "supported by firmware (%d %d) x%x\n",
12219 bf_get(cfg_nvme, mbx_sli4_parameters),
12220 bf_get(cfg_xib, mbx_sli4_parameters),
12221 phba->cfg_enable_fc4_type);
12223 phba->nvme_support = 0;
12224 phba->nvmet_support = 0;
12225 phba->cfg_nvmet_mrq = 0;
12226 phba->cfg_nvme_seg_cnt = 0;
12228 /* If no FC4 type support, move to just SCSI support */
12229 if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
12231 phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
12235 /* If the NVME FC4 type is enabled, scale the sg_seg_cnt to
12236 * accommodate 512K and 1M IOs in a single nvme buf.
12238 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
12239 phba->cfg_sg_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
12241 /* Only embed PBDE for if_type 6, PBDE support requires xib be set */
12242 if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
12243 LPFC_SLI_INTF_IF_TYPE_6) || (!bf_get(cfg_xib, mbx_sli4_parameters)))
12244 phba->cfg_enable_pbde = 0;
12247 * To support Suppress Response feature we must satisfy 3 conditions.
12248 * lpfc_suppress_rsp module parameter must be set (default).
12249 * In SLI4-Parameters Descriptor:
12250 * Extended Inline Buffers (XIB) must be supported.
12251 * Suppress Response IU Not Supported (SRIUNS) must NOT be supported
12252 * (double negative).
12254 if (phba->cfg_suppress_rsp && bf_get(cfg_xib, mbx_sli4_parameters) &&
12255 !(bf_get(cfg_nosr, mbx_sli4_parameters)))
12256 phba->sli.sli_flag |= LPFC_SLI_SUPPRESS_RSP;
12258 phba->cfg_suppress_rsp = 0;
12260 if (bf_get(cfg_eqdr, mbx_sli4_parameters))
12261 phba->sli.sli_flag |= LPFC_SLI_USE_EQDR;
12263 /* Make sure that sge_supp_len can be handled by the driver */
12264 if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
12265 sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
12268 * Check whether the adapter supports an embedded copy of the
12269 * FCP CMD IU within the WQE for FCP_Ixxx commands. In order
12270 * to use this option, 128-byte WQEs must be used.
12272 if (bf_get(cfg_ext_embed_cb, mbx_sli4_parameters))
12273 phba->fcp_embed_io = 1;
12275 phba->fcp_embed_io = 0;
12277 lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
12278 "6422 XIB %d PBDE %d: FCP %d NVME %d %d %d\n",
12279 bf_get(cfg_xib, mbx_sli4_parameters),
12280 phba->cfg_enable_pbde,
12281 phba->fcp_embed_io, phba->nvme_support,
12282 phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);
12284 if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
12285 LPFC_SLI_INTF_IF_TYPE_2) &&
12286 (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
12287 LPFC_SLI_INTF_FAMILY_LNCR_A0))
12288 exp_wqcq_pages = false;
12290 if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) &&
12291 (bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) &&
12293 (sli4_params->wqsize & LPFC_WQ_SZ128_SUPPORT))
12294 phba->enab_exp_wqcq_pages = 1;
12296 phba->enab_exp_wqcq_pages = 0;
12298 * Check if the SLI port supports MDS Diagnostics
12300 if (bf_get(cfg_mds_diags, mbx_sli4_parameters))
12301 phba->mds_diags_support = 1;
12303 phba->mds_diags_support = 0;
12306 * Check if the SLI port supports NSLER
12308 if (bf_get(cfg_nsler, mbx_sli4_parameters))
12317 * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
12318 * @pdev: pointer to PCI device
12319 * @pid: pointer to PCI device identifier
12321 * This routine is to be called to attach a device with SLI-3 interface spec
12322 * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
12323 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
12324 * information of the device and driver to see if the driver state that it can
12325 * support this kind of device. If the match is successful, the driver core
12326 * invokes this routine. If this routine determines it can claim the HBA, it
12327 * does all the initialization that it needs to do to handle the HBA properly.
12330 * 0 - driver can claim the device
12331 * negative value - driver can not claim the device
12334 lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
12336 struct lpfc_hba *phba;
12337 struct lpfc_vport *vport = NULL;
12338 struct Scsi_Host *shost = NULL;
12340 uint32_t cfg_mode, intr_mode;
12342 /* Allocate memory for HBA structure */
12343 phba = lpfc_hba_alloc(pdev);
12347 /* Perform generic PCI device enabling operation */
12348 error = lpfc_enable_pci_dev(phba);
12350 goto out_free_phba;
12352 /* Set up SLI API function jump table for PCI-device group-0 HBAs */
12353 error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
12355 goto out_disable_pci_dev;
12357 /* Set up SLI-3 specific device PCI memory space */
12358 error = lpfc_sli_pci_mem_setup(phba);
12360 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12361 "1402 Failed to set up pci memory space.\n");
12362 goto out_disable_pci_dev;
12365 /* Set up SLI-3 specific device driver resources */
12366 error = lpfc_sli_driver_resource_setup(phba);
12368 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12369 "1404 Failed to set up driver resource.\n");
12370 goto out_unset_pci_mem_s3;
12373 /* Initialize and populate the iocb list per host */
12375 error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
12377 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12378 "1405 Failed to initialize iocb list.\n");
12379 goto out_unset_driver_resource_s3;
12382 /* Set up common device driver resources */
12383 error = lpfc_setup_driver_resource_phase2(phba);
12385 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12386 "1406 Failed to set up driver resource.\n");
12387 goto out_free_iocb_list;
12390 /* Get the default values for Model Name and Description */
12391 lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
12393 /* Create SCSI host to the physical port */
12394 error = lpfc_create_shost(phba);
12396 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12397 "1407 Failed to create scsi host.\n");
12398 goto out_unset_driver_resource;
12401 /* Configure sysfs attributes */
12402 vport = phba->pport;
12403 error = lpfc_alloc_sysfs_attr(vport);
12405 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12406 "1476 Failed to allocate sysfs attr\n");
12407 goto out_destroy_shost;
12410 shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
12411 /* Now, trying to enable interrupt and bring up the device */
12412 cfg_mode = phba->cfg_use_msi;
12414 /* Put device to a known state before enabling interrupt */
12415 lpfc_stop_port(phba);
12416 /* Configure and enable interrupt */
12417 intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
12418 if (intr_mode == LPFC_INTR_ERROR) {
12419 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12420 "0431 Failed to enable interrupt.\n");
12422 goto out_free_sysfs_attr;
12424 /* SLI-3 HBA setup */
12425 if (lpfc_sli_hba_setup(phba)) {
12426 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12427 "1477 Failed to set up hba\n");
12429 goto out_remove_device;
12432 /* Wait 50ms for the interrupts of previous mailbox commands */
12434 /* Check active interrupts on message signaled interrupts */
12435 if (intr_mode == 0 ||
12436 phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
12437 /* Log the current active interrupt mode */
12438 phba->intr_mode = intr_mode;
12439 lpfc_log_intr_mode(phba, intr_mode);
12442 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
12443 "0447 Configure interrupt mode (%d) "
12444 "failed active interrupt test.\n",
12446 /* Disable the current interrupt mode */
12447 lpfc_sli_disable_intr(phba);
12448 /* Try next level of interrupt mode */
12449 cfg_mode = --intr_mode;
12453 /* Perform post initialization setup */
12454 lpfc_post_init_setup(phba);
12456 /* Check if there are static vports to be created. */
12457 lpfc_create_static_vport(phba);
12462 lpfc_unset_hba(phba);
12463 out_free_sysfs_attr:
12464 lpfc_free_sysfs_attr(vport);
12466 lpfc_destroy_shost(phba);
12467 out_unset_driver_resource:
12468 lpfc_unset_driver_resource_phase2(phba);
12469 out_free_iocb_list:
12470 lpfc_free_iocb_list(phba);
12471 out_unset_driver_resource_s3:
12472 lpfc_sli_driver_resource_unset(phba);
12473 out_unset_pci_mem_s3:
12474 lpfc_sli_pci_mem_unset(phba);
12475 out_disable_pci_dev:
12476 lpfc_disable_pci_dev(phba);
12478 scsi_host_put(shost);
12480 lpfc_hba_free(phba);
12485 * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
12486 * @pdev: pointer to PCI device
12488 * This routine is to be called to disattach a device with SLI-3 interface
12489 * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
12490 * removed from PCI bus, it performs all the necessary cleanup for the HBA
12491 * device to be removed from the PCI subsystem properly.
12494 lpfc_pci_remove_one_s3(struct pci_dev *pdev)
12496 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12497 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
12498 struct lpfc_vport **vports;
12499 struct lpfc_hba *phba = vport->phba;
12502 spin_lock_irq(&phba->hbalock);
12503 vport->load_flag |= FC_UNLOADING;
12504 spin_unlock_irq(&phba->hbalock);
12506 lpfc_free_sysfs_attr(vport);
12508 /* Release all the vports against this physical port */
12509 vports = lpfc_create_vport_work_array(phba);
12510 if (vports != NULL)
12511 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
12512 if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
12514 fc_vport_terminate(vports[i]->fc_vport);
12516 lpfc_destroy_vport_work_array(phba, vports);
12518 /* Remove FC host and then SCSI host with the physical port */
12519 fc_remove_host(shost);
12520 scsi_remove_host(shost);
12522 lpfc_cleanup(vport);
12525 * Bring down the SLI Layer. This step disable all interrupts,
12526 * clears the rings, discards all mailbox commands, and resets
12530 /* HBA interrupt will be disabled after this call */
12531 lpfc_sli_hba_down(phba);
12532 /* Stop kthread signal shall trigger work_done one more time */
12533 kthread_stop(phba->worker_thread);
12534 /* Final cleanup of txcmplq and reset the HBA */
12535 lpfc_sli_brdrestart(phba);
12537 kfree(phba->vpi_bmask);
12538 kfree(phba->vpi_ids);
12540 lpfc_stop_hba_timers(phba);
12541 spin_lock_irq(&phba->port_list_lock);
12542 list_del_init(&vport->listentry);
12543 spin_unlock_irq(&phba->port_list_lock);
12545 lpfc_debugfs_terminate(vport);
12547 /* Disable SR-IOV if enabled */
12548 if (phba->cfg_sriov_nr_virtfn)
12549 pci_disable_sriov(pdev);
12551 /* Disable interrupt */
12552 lpfc_sli_disable_intr(phba);
12554 scsi_host_put(shost);
12557 * Call scsi_free before mem_free since scsi bufs are released to their
12558 * corresponding pools here.
12560 lpfc_scsi_free(phba);
12561 lpfc_free_iocb_list(phba);
12563 lpfc_mem_free_all(phba);
12565 dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
12566 phba->hbqslimp.virt, phba->hbqslimp.phys);
12568 /* Free resources associated with SLI2 interface */
12569 dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
12570 phba->slim2p.virt, phba->slim2p.phys);
12572 /* unmap adapter SLIM and Control Registers */
12573 iounmap(phba->ctrl_regs_memmap_p);
12574 iounmap(phba->slim_memmap_p);
12576 lpfc_hba_free(phba);
12578 pci_release_mem_regions(pdev);
12579 pci_disable_device(pdev);
12583 * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
12584 * @pdev: pointer to PCI device
12585 * @msg: power management message
12587 * This routine is to be called from the kernel's PCI subsystem to support
12588 * system Power Management (PM) to device with SLI-3 interface spec. When
12589 * PM invokes this method, it quiesces the device by stopping the driver's
12590 * worker thread for the device, turning off device's interrupt and DMA,
12591 * and bring the device offline. Note that as the driver implements the
12592 * minimum PM requirements to a power-aware driver's PM support for the
12593 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
12594 * to the suspend() method call will be treated as SUSPEND and the driver will
12595 * fully reinitialize its device during resume() method call, the driver will
12596 * set device to PCI_D3hot state in PCI config space instead of setting it
12597 * according to the @msg provided by the PM.
12600 * 0 - driver suspended the device
12604 lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
12606 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12607 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
12609 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
12610 "0473 PCI device Power Management suspend.\n");
12612 /* Bring down the device */
12613 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
12614 lpfc_offline(phba);
12615 kthread_stop(phba->worker_thread);
12617 /* Disable interrupt from device */
12618 lpfc_sli_disable_intr(phba);
12620 /* Save device state to PCI config space */
12621 pci_save_state(pdev);
12622 pci_set_power_state(pdev, PCI_D3hot);
12628 * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
12629 * @pdev: pointer to PCI device
12631 * This routine is to be called from the kernel's PCI subsystem to support
12632 * system Power Management (PM) to device with SLI-3 interface spec. When PM
12633 * invokes this method, it restores the device's PCI config space state and
12634 * fully reinitializes the device and brings it online. Note that as the
12635 * driver implements the minimum PM requirements to a power-aware driver's
12636 * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
12637 * FREEZE) to the suspend() method call will be treated as SUSPEND and the
12638 * driver will fully reinitialize its device during resume() method call,
12639 * the device will be set to PCI_D0 directly in PCI config space before
12640 * restoring the state.
12643 * 0 - driver suspended the device
12647 lpfc_pci_resume_one_s3(struct pci_dev *pdev)
12649 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12650 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
12651 uint32_t intr_mode;
12654 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
12655 "0452 PCI device Power Management resume.\n");
12657 /* Restore device state from PCI config space */
12658 pci_set_power_state(pdev, PCI_D0);
12659 pci_restore_state(pdev);
12662 * As the new kernel behavior of pci_restore_state() API call clears
12663 * device saved_state flag, need to save the restored state again.
12665 pci_save_state(pdev);
12667 if (pdev->is_busmaster)
12668 pci_set_master(pdev);
12670 /* Startup the kernel thread for this host adapter. */
12671 phba->worker_thread = kthread_run(lpfc_do_work, phba,
12672 "lpfc_worker_%d", phba->brd_no);
12673 if (IS_ERR(phba->worker_thread)) {
12674 error = PTR_ERR(phba->worker_thread);
12675 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
12676 "0434 PM resume failed to start worker "
12677 "thread: error=x%x.\n", error);
12681 /* Configure and enable interrupt */
12682 intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
12683 if (intr_mode == LPFC_INTR_ERROR) {
12684 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12685 "0430 PM resume Failed to enable interrupt\n");
12688 phba->intr_mode = intr_mode;
12690 /* Restart HBA and bring it online */
12691 lpfc_sli_brdrestart(phba);
12694 /* Log the current active interrupt mode */
12695 lpfc_log_intr_mode(phba, phba->intr_mode);
12701 * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
12702 * @phba: pointer to lpfc hba data structure.
12704 * This routine is called to prepare the SLI3 device for PCI slot recover. It
12705 * aborts all the outstanding SCSI I/Os to the pci device.
12708 lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
12710 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12711 "2723 PCI channel I/O abort preparing for recovery\n");
12714 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
12715 * and let the SCSI mid-layer to retry them to recover.
12717 lpfc_sli_abort_fcp_rings(phba);
12721 * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
12722 * @phba: pointer to lpfc hba data structure.
12724 * This routine is called to prepare the SLI3 device for PCI slot reset. It
12725 * disables the device interrupt and pci device, and aborts the internal FCP
12729 lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
12731 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12732 "2710 PCI channel disable preparing for reset\n");
12734 /* Block any management I/Os to the device */
12735 lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);
12737 /* Block all SCSI devices' I/Os on the host */
12738 lpfc_scsi_dev_block(phba);
12740 /* Flush all driver's outstanding SCSI I/Os as we are to reset */
12741 lpfc_sli_flush_io_rings(phba);
12743 /* stop all timers */
12744 lpfc_stop_hba_timers(phba);
12746 /* Disable interrupt and pci device */
12747 lpfc_sli_disable_intr(phba);
12748 pci_disable_device(phba->pcidev);
12752 * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
12753 * @phba: pointer to lpfc hba data structure.
12755 * This routine is called to prepare the SLI3 device for PCI slot permanently
12756 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
12760 lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba *phba)
12762 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12763 "2711 PCI channel permanent disable for failure\n");
12764 /* Block all SCSI devices' I/Os on the host */
12765 lpfc_scsi_dev_block(phba);
12767 /* stop all timers */
12768 lpfc_stop_hba_timers(phba);
12770 /* Clean up all driver's outstanding SCSI I/Os */
12771 lpfc_sli_flush_io_rings(phba);
12775 * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
12776 * @pdev: pointer to PCI device.
12777 * @state: the current PCI connection state.
12779 * This routine is called from the PCI subsystem for I/O error handling to
12780 * device with SLI-3 interface spec. This function is called by the PCI
12781 * subsystem after a PCI bus error affecting this device has been detected.
12782 * When this function is invoked, it will need to stop all the I/Os and
12783 * interrupt(s) to the device. Once that is done, it will return
12784 * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
12788 * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
12789 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
12790 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
12792 static pci_ers_result_t
12793 lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
12795 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12796 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
12799 case pci_channel_io_normal:
12800 /* Non-fatal error, prepare for recovery */
12801 lpfc_sli_prep_dev_for_recover(phba);
12802 return PCI_ERS_RESULT_CAN_RECOVER;
12803 case pci_channel_io_frozen:
12804 /* Fatal error, prepare for slot reset */
12805 lpfc_sli_prep_dev_for_reset(phba);
12806 return PCI_ERS_RESULT_NEED_RESET;
12807 case pci_channel_io_perm_failure:
12808 /* Permanent failure, prepare for device down */
12809 lpfc_sli_prep_dev_for_perm_failure(phba);
12810 return PCI_ERS_RESULT_DISCONNECT;
12812 /* Unknown state, prepare and request slot reset */
12813 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12814 "0472 Unknown PCI error state: x%x\n", state);
12815 lpfc_sli_prep_dev_for_reset(phba);
12816 return PCI_ERS_RESULT_NEED_RESET;
12821 * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
12822 * @pdev: pointer to PCI device.
12824 * This routine is called from the PCI subsystem for error handling to
12825 * device with SLI-3 interface spec. This is called after PCI bus has been
12826 * reset to restart the PCI card from scratch, as if from a cold-boot.
12827 * During the PCI subsystem error recovery, after driver returns
12828 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
12829 * recovery and then call this routine before calling the .resume method
12830 * to recover the device. This function will initialize the HBA device,
12831 * enable the interrupt, but it will just put the HBA to offline state
12832 * without passing any I/O traffic.
12835 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
12836 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
12838 static pci_ers_result_t
12839 lpfc_io_slot_reset_s3(struct pci_dev *pdev)
12841 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12842 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
12843 struct lpfc_sli *psli = &phba->sli;
12844 uint32_t intr_mode;
12846 dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
12847 if (pci_enable_device_mem(pdev)) {
12848 printk(KERN_ERR "lpfc: Cannot re-enable "
12849 "PCI device after reset.\n");
12850 return PCI_ERS_RESULT_DISCONNECT;
12853 pci_restore_state(pdev);
12856 * As the new kernel behavior of pci_restore_state() API call clears
12857 * device saved_state flag, need to save the restored state again.
12859 pci_save_state(pdev);
12861 if (pdev->is_busmaster)
12862 pci_set_master(pdev);
12864 spin_lock_irq(&phba->hbalock);
12865 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
12866 spin_unlock_irq(&phba->hbalock);
12868 /* Configure and enable interrupt */
12869 intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
12870 if (intr_mode == LPFC_INTR_ERROR) {
12871 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12872 "0427 Cannot re-enable interrupt after "
12874 return PCI_ERS_RESULT_DISCONNECT;
12876 phba->intr_mode = intr_mode;
12878 /* Take device offline, it will perform cleanup */
12879 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
12880 lpfc_offline(phba);
12881 lpfc_sli_brdrestart(phba);
12883 /* Log the current active interrupt mode */
12884 lpfc_log_intr_mode(phba, phba->intr_mode);
12886 return PCI_ERS_RESULT_RECOVERED;
12890 * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
12891 * @pdev: pointer to PCI device
12893 * This routine is called from the PCI subsystem for error handling to device
12894 * with SLI-3 interface spec. It is called when kernel error recovery tells
12895 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
12896 * error recovery. After this call, traffic can start to flow from this device
12900 lpfc_io_resume_s3(struct pci_dev *pdev)
12902 struct Scsi_Host *shost = pci_get_drvdata(pdev);
12903 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
12905 /* Bring device online, it will be no-op for non-fatal error resume */
12910 * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
12911 * @phba: pointer to lpfc hba data structure.
12913 * returns the number of ELS/CT IOCBs to reserve
12916 lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
12918 int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
12920 if (phba->sli_rev == LPFC_SLI_REV4) {
12921 if (max_xri <= 100)
12923 else if (max_xri <= 256)
12925 else if (max_xri <= 512)
12927 else if (max_xri <= 1024)
12929 else if (max_xri <= 1536)
12931 else if (max_xri <= 2048)
12940 * lpfc_sli4_get_iocb_cnt - Calculate the # of total IOCBs to reserve
12941 * @phba: pointer to lpfc hba data structure.
12943 * returns the number of ELS/CT + NVMET IOCBs to reserve
12946 lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba)
12948 int max_xri = lpfc_sli4_get_els_iocb_cnt(phba);
12950 if (phba->nvmet_support)
12951 max_xri += LPFC_NVMET_BUF_POST;
12957 lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
12958 uint32_t magic_number, uint32_t ftype, uint32_t fid, uint32_t fsize,
12959 const struct firmware *fw)
12963 /* Three cases: (1) FW was not supported on the detected adapter.
12964 * (2) FW update has been locked out administratively.
12965 * (3) Some other error during FW update.
12966 * In each case, an unmaskable message is written to the console
12967 * for admin diagnosis.
12969 if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
12970 (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
12971 magic_number != MAGIC_NUMBER_G6) ||
12972 (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC &&
12973 magic_number != MAGIC_NUMBER_G7)) {
12974 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12975 "3030 This firmware version is not supported on"
12976 " this HBA model. Device:%x Magic:%x Type:%x "
12977 "ID:%x Size %d %zd\n",
12978 phba->pcidev->device, magic_number, ftype, fid,
12981 } else if (offset == ADD_STATUS_FW_DOWNLOAD_HW_DISABLED) {
12982 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12983 "3021 Firmware downloads have been prohibited "
12984 "by a system configuration setting on "
12985 "Device:%x Magic:%x Type:%x ID:%x Size %d "
12987 phba->pcidev->device, magic_number, ftype, fid,
12991 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
12992 "3022 FW Download failed. Add Status x%x "
12993 "Device:%x Magic:%x Type:%x ID:%x Size %d "
12995 offset, phba->pcidev->device, magic_number,
12996 ftype, fid, fsize, fw->size);
13003 * lpfc_write_firmware - attempt to write a firmware image to the port
13004 * @fw: pointer to firmware image returned from request_firmware.
13005 * @context: pointer to firmware image returned from request_firmware.
13009 lpfc_write_firmware(const struct firmware *fw, void *context)
13011 struct lpfc_hba *phba = (struct lpfc_hba *)context;
13012 char fwrev[FW_REV_STR_SIZE];
13013 struct lpfc_grp_hdr *image;
13014 struct list_head dma_buffer_list;
13016 struct lpfc_dmabuf *dmabuf, *next;
13017 uint32_t offset = 0, temp_offset = 0;
13018 uint32_t magic_number, ftype, fid, fsize;
13020 /* It can be null in no-wait mode, sanity check */
13025 image = (struct lpfc_grp_hdr *)fw->data;
13027 magic_number = be32_to_cpu(image->magic_number);
13028 ftype = bf_get_be32(lpfc_grp_hdr_file_type, image);
13029 fid = bf_get_be32(lpfc_grp_hdr_id, image);
13030 fsize = be32_to_cpu(image->size);
13032 INIT_LIST_HEAD(&dma_buffer_list);
13033 lpfc_decode_firmware_rev(phba, fwrev, 1);
13034 if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
13035 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13036 "3023 Updating Firmware, Current Version:%s "
13037 "New Version:%s\n",
13038 fwrev, image->revision);
13039 for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
13040 dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
13046 dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
13050 if (!dmabuf->virt) {
13055 list_add_tail(&dmabuf->list, &dma_buffer_list);
13057 while (offset < fw->size) {
13058 temp_offset = offset;
13059 list_for_each_entry(dmabuf, &dma_buffer_list, list) {
13060 if (temp_offset + SLI4_PAGE_SIZE > fw->size) {
13061 memcpy(dmabuf->virt,
13062 fw->data + temp_offset,
13063 fw->size - temp_offset);
13064 temp_offset = fw->size;
13067 memcpy(dmabuf->virt, fw->data + temp_offset,
13069 temp_offset += SLI4_PAGE_SIZE;
13071 rc = lpfc_wr_object(phba, &dma_buffer_list,
13072 (fw->size - offset), &offset);
13074 rc = lpfc_log_write_firmware_error(phba, offset,
13085 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13086 "3029 Skipped Firmware update, Current "
13087 "Version:%s New Version:%s\n",
13088 fwrev, image->revision);
13091 list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
13092 list_del(&dmabuf->list);
13093 dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
13094 dmabuf->virt, dmabuf->phys);
13097 release_firmware(fw);
13100 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13101 "3062 Firmware update error, status %d.\n", rc);
13103 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13104 "3024 Firmware update success: size %d.\n", rc);
13108 * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade
13109 * @phba: pointer to lpfc hba data structure.
13110 * @fw_upgrade: which firmware to update.
13112 * This routine is called to perform Linux generic firmware upgrade on device
13113 * that supports such feature.
13116 lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
13118 uint8_t file_name[ELX_MODEL_NAME_SIZE];
13120 const struct firmware *fw;
13122 /* Only supported on SLI4 interface type 2 for now */
13123 if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
13124 LPFC_SLI_INTF_IF_TYPE_2)
13127 snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp", phba->ModelName);
13129 if (fw_upgrade == INT_FW_UPGRADE) {
13130 ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
13131 file_name, &phba->pcidev->dev,
13132 GFP_KERNEL, (void *)phba,
13133 lpfc_write_firmware);
13134 } else if (fw_upgrade == RUN_FW_UPGRADE) {
13135 ret = request_firmware(&fw, file_name, &phba->pcidev->dev);
13137 lpfc_write_firmware(fw, (void *)phba);
13146 * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
13147 * @pdev: pointer to PCI device
13148 * @pid: pointer to PCI device identifier
13150 * This routine is called from the kernel's PCI subsystem to device with
13151 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
13152 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
13153 * information of the device and driver to see if the driver state that it
13154 * can support this kind of device. If the match is successful, the driver
13155 * core invokes this routine. If this routine determines it can claim the HBA,
13156 * it does all the initialization that it needs to do to handle the HBA
13160 * 0 - driver can claim the device
13161 * negative value - driver can not claim the device
13164 lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
13166 struct lpfc_hba *phba;
13167 struct lpfc_vport *vport = NULL;
13168 struct Scsi_Host *shost = NULL;
13170 uint32_t cfg_mode, intr_mode;
13172 /* Allocate memory for HBA structure */
13173 phba = lpfc_hba_alloc(pdev);
13177 /* Perform generic PCI device enabling operation */
13178 error = lpfc_enable_pci_dev(phba);
13180 goto out_free_phba;
13182 /* Set up SLI API function jump table for PCI-device group-1 HBAs */
13183 error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
13185 goto out_disable_pci_dev;
13187 /* Set up SLI-4 specific device PCI memory space */
13188 error = lpfc_sli4_pci_mem_setup(phba);
13190 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13191 "1410 Failed to set up pci memory space.\n");
13192 goto out_disable_pci_dev;
13195 /* Set up SLI-4 Specific device driver resources */
13196 error = lpfc_sli4_driver_resource_setup(phba);
13198 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13199 "1412 Failed to set up driver resource.\n");
13200 goto out_unset_pci_mem_s4;
13203 INIT_LIST_HEAD(&phba->active_rrq_list);
13204 INIT_LIST_HEAD(&phba->fcf.fcf_pri_list);
13206 /* Set up common device driver resources */
13207 error = lpfc_setup_driver_resource_phase2(phba);
13209 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13210 "1414 Failed to set up driver resource.\n");
13211 goto out_unset_driver_resource_s4;
13214 /* Get the default values for Model Name and Description */
13215 lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
13217 /* Now, trying to enable interrupt and bring up the device */
13218 cfg_mode = phba->cfg_use_msi;
13220 /* Put device to a known state before enabling interrupt */
13221 phba->pport = NULL;
13222 lpfc_stop_port(phba);
13224 /* Init cpu_map array */
13225 lpfc_cpu_map_array_init(phba);
13227 /* Init hba_eq_hdl array */
13228 lpfc_hba_eq_hdl_array_init(phba);
13230 /* Configure and enable interrupt */
13231 intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
13232 if (intr_mode == LPFC_INTR_ERROR) {
13233 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13234 "0426 Failed to enable interrupt.\n");
13236 goto out_unset_driver_resource;
13238 /* Default to single EQ for non-MSI-X */
13239 if (phba->intr_type != MSIX) {
13240 phba->cfg_irq_chann = 1;
13241 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
13242 if (phba->nvmet_support)
13243 phba->cfg_nvmet_mrq = 1;
13246 lpfc_cpu_affinity_check(phba, phba->cfg_irq_chann);
13248 /* Create SCSI host to the physical port */
13249 error = lpfc_create_shost(phba);
13251 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13252 "1415 Failed to create scsi host.\n");
13253 goto out_disable_intr;
13255 vport = phba->pport;
13256 shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
13258 /* Configure sysfs attributes */
13259 error = lpfc_alloc_sysfs_attr(vport);
13261 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13262 "1416 Failed to allocate sysfs attr\n");
13263 goto out_destroy_shost;
13266 /* Set up SLI-4 HBA */
13267 if (lpfc_sli4_hba_setup(phba)) {
13268 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13269 "1421 Failed to set up hba\n");
13271 goto out_free_sysfs_attr;
13274 /* Log the current active interrupt mode */
13275 phba->intr_mode = intr_mode;
13276 lpfc_log_intr_mode(phba, intr_mode);
13278 /* Perform post initialization setup */
13279 lpfc_post_init_setup(phba);
13281 /* NVME support in FW earlier in the driver load corrects the
13282 * FC4 type making a check for nvme_support unnecessary.
13284 if (phba->nvmet_support == 0) {
13285 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
13286 /* Create NVME binding with nvme_fc_transport. This
13287 * ensures the vport is initialized. If the localport
13288 * create fails, it should not unload the driver to
13289 * support field issues.
13291 error = lpfc_nvme_create_localport(vport);
13293 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13294 "6004 NVME registration "
13295 "failed, error x%x\n",
13301 /* check for firmware upgrade or downgrade */
13302 if (phba->cfg_request_firmware_upgrade)
13303 lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);
13305 /* Check if there are static vports to be created. */
13306 lpfc_create_static_vport(phba);
13308 /* Enable RAS FW log support */
13309 lpfc_sli4_ras_setup(phba);
13311 INIT_LIST_HEAD(&phba->poll_list);
13312 timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
13313 cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);
13317 out_free_sysfs_attr:
13318 lpfc_free_sysfs_attr(vport);
13320 lpfc_destroy_shost(phba);
13322 lpfc_sli4_disable_intr(phba);
13323 out_unset_driver_resource:
13324 lpfc_unset_driver_resource_phase2(phba);
13325 out_unset_driver_resource_s4:
13326 lpfc_sli4_driver_resource_unset(phba);
13327 out_unset_pci_mem_s4:
13328 lpfc_sli4_pci_mem_unset(phba);
13329 out_disable_pci_dev:
13330 lpfc_disable_pci_dev(phba);
13332 scsi_host_put(shost);
13334 lpfc_hba_free(phba);
13339 * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
13340 * @pdev: pointer to PCI device
13342 * This routine is called from the kernel's PCI subsystem to device with
13343 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
13344 * removed from PCI bus, it performs all the necessary cleanup for the HBA
13345 * device to be removed from the PCI subsystem properly.
13348 lpfc_pci_remove_one_s4(struct pci_dev *pdev)
13350 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13351 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
13352 struct lpfc_vport **vports;
13353 struct lpfc_hba *phba = vport->phba;
13356 /* Mark the device unloading flag */
13357 spin_lock_irq(&phba->hbalock);
13358 vport->load_flag |= FC_UNLOADING;
13359 spin_unlock_irq(&phba->hbalock);
13361 /* Free the HBA sysfs attributes */
13362 lpfc_free_sysfs_attr(vport);
13364 /* Release all the vports against this physical port */
13365 vports = lpfc_create_vport_work_array(phba);
13366 if (vports != NULL)
13367 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
13368 if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
13370 fc_vport_terminate(vports[i]->fc_vport);
13372 lpfc_destroy_vport_work_array(phba, vports);
13374 /* Remove FC host and then SCSI host with the physical port */
13375 fc_remove_host(shost);
13376 scsi_remove_host(shost);
13378 /* Perform ndlp cleanup on the physical port. The nvme and nvmet
13379 * localports are destroyed after to cleanup all transport memory.
13381 lpfc_cleanup(vport);
13382 lpfc_nvmet_destroy_targetport(phba);
13383 lpfc_nvme_destroy_localport(vport);
13385 /* De-allocate multi-XRI pools */
13386 if (phba->cfg_xri_rebalancing)
13387 lpfc_destroy_multixri_pools(phba);
13390 * Bring down the SLI Layer. This step disables all interrupts,
13391 * clears the rings, discards all mailbox commands, and resets
13392 * the HBA FCoE function.
13394 lpfc_debugfs_terminate(vport);
13396 lpfc_stop_hba_timers(phba);
13397 spin_lock_irq(&phba->port_list_lock);
13398 list_del_init(&vport->listentry);
13399 spin_unlock_irq(&phba->port_list_lock);
13401 /* Perform scsi free before driver resource_unset since scsi
13402 * buffers are released to their corresponding pools here.
13404 lpfc_io_free(phba);
13405 lpfc_free_iocb_list(phba);
13406 lpfc_sli4_hba_unset(phba);
13408 lpfc_unset_driver_resource_phase2(phba);
13409 lpfc_sli4_driver_resource_unset(phba);
13411 /* Unmap adapter Control and Doorbell registers */
13412 lpfc_sli4_pci_mem_unset(phba);
13414 /* Release PCI resources and disable device's PCI function */
13415 scsi_host_put(shost);
13416 lpfc_disable_pci_dev(phba);
13418 /* Finally, free the driver's device data structure */
13419 lpfc_hba_free(phba);
13425 * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
13426 * @pdev: pointer to PCI device
13427 * @msg: power management message
13429 * This routine is called from the kernel's PCI subsystem to support system
13430 * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
13431 * this method, it quiesces the device by stopping the driver's worker
13432 * thread for the device, turning off device's interrupt and DMA, and bring
13433 * the device offline. Note that as the driver implements the minimum PM
13434 * requirements to a power-aware driver's PM support for suspend/resume -- all
13435 * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
13436 * method call will be treated as SUSPEND and the driver will fully
13437 * reinitialize its device during resume() method call, the driver will set
13438 * device to PCI_D3hot state in PCI config space instead of setting it
13439 * according to the @msg provided by the PM.
13442 * 0 - driver suspended the device
13446 lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
13448 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13449 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13451 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
13452 "2843 PCI device Power Management suspend.\n");
13454 /* Bring down the device */
13455 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
13456 lpfc_offline(phba);
13457 kthread_stop(phba->worker_thread);
13459 /* Disable interrupt from device */
13460 lpfc_sli4_disable_intr(phba);
13461 lpfc_sli4_queue_destroy(phba);
13463 /* Save device state to PCI config space */
13464 pci_save_state(pdev);
13465 pci_set_power_state(pdev, PCI_D3hot);
13471 * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
13472 * @pdev: pointer to PCI device
13474 * This routine is called from the kernel's PCI subsystem to support system
13475 * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
13476 * this method, it restores the device's PCI config space state and fully
13477 * reinitializes the device and brings it online. Note that as the driver
13478 * implements the minimum PM requirements to a power-aware driver's PM for
13479 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
13480 * to the suspend() method call will be treated as SUSPEND and the driver
13481 * will fully reinitialize its device during resume() method call, the device
13482 * will be set to PCI_D0 directly in PCI config space before restoring the
13486 * 0 - driver suspended the device
13490 lpfc_pci_resume_one_s4(struct pci_dev *pdev)
13492 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13493 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13494 uint32_t intr_mode;
13497 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
13498 "0292 PCI device Power Management resume.\n");
13500 /* Restore device state from PCI config space */
13501 pci_set_power_state(pdev, PCI_D0);
13502 pci_restore_state(pdev);
13505 * As the new kernel behavior of pci_restore_state() API call clears
13506 * device saved_state flag, need to save the restored state again.
13508 pci_save_state(pdev);
13510 if (pdev->is_busmaster)
13511 pci_set_master(pdev);
13513 /* Startup the kernel thread for this host adapter. */
13514 phba->worker_thread = kthread_run(lpfc_do_work, phba,
13515 "lpfc_worker_%d", phba->brd_no);
13516 if (IS_ERR(phba->worker_thread)) {
13517 error = PTR_ERR(phba->worker_thread);
13518 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
13519 "0293 PM resume failed to start worker "
13520 "thread: error=x%x.\n", error);
13524 /* Configure and enable interrupt */
13525 intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
13526 if (intr_mode == LPFC_INTR_ERROR) {
13527 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13528 "0294 PM resume Failed to enable interrupt\n");
13531 phba->intr_mode = intr_mode;
13533 /* Restart HBA and bring it online */
13534 lpfc_sli_brdrestart(phba);
13537 /* Log the current active interrupt mode */
13538 lpfc_log_intr_mode(phba, phba->intr_mode);
13544 * lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover
13545 * @phba: pointer to lpfc hba data structure.
13547 * This routine is called to prepare the SLI4 device for PCI slot recover. It
13548 * aborts all the outstanding SCSI I/Os to the pci device.
13551 lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
13553 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13554 "2828 PCI channel I/O abort preparing for recovery\n");
13556 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
13557 * and let the SCSI mid-layer to retry them to recover.
13559 lpfc_sli_abort_fcp_rings(phba);
13563 * lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset
13564 * @phba: pointer to lpfc hba data structure.
13566 * This routine is called to prepare the SLI4 device for PCI slot reset. It
13567 * disables the device interrupt and pci device, and aborts the internal FCP
13571 lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
13573 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13574 "2826 PCI channel disable preparing for reset\n");
13576 /* Block any management I/Os to the device */
13577 lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT);
13579 /* Block all SCSI devices' I/Os on the host */
13580 lpfc_scsi_dev_block(phba);
13582 /* Flush all driver's outstanding I/Os as we are to reset */
13583 lpfc_sli_flush_io_rings(phba);
13585 /* stop all timers */
13586 lpfc_stop_hba_timers(phba);
13588 /* Disable interrupt and pci device */
13589 lpfc_sli4_disable_intr(phba);
13590 lpfc_sli4_queue_destroy(phba);
13591 pci_disable_device(phba->pcidev);
13595 * lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable
13596 * @phba: pointer to lpfc hba data structure.
13598 * This routine is called to prepare the SLI4 device for PCI slot permanently
13599 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
13603 lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba *phba)
13605 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13606 "2827 PCI channel permanent disable for failure\n");
13608 /* Block all SCSI devices' I/Os on the host */
13609 lpfc_scsi_dev_block(phba);
13611 /* stop all timers */
13612 lpfc_stop_hba_timers(phba);
13614 /* Clean up all driver's outstanding I/Os */
13615 lpfc_sli_flush_io_rings(phba);
13619 * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
13620 * @pdev: pointer to PCI device.
13621 * @state: the current PCI connection state.
13623 * This routine is called from the PCI subsystem for error handling to device
13624 * with SLI-4 interface spec. This function is called by the PCI subsystem
13625 * after a PCI bus error affecting this device has been detected. When this
13626 * function is invoked, it will need to stop all the I/Os and interrupt(s)
13627 * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
13628 * for the PCI subsystem to perform proper recovery as desired.
13631 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
13632 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
13634 static pci_ers_result_t
13635 lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
13637 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13638 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13641 case pci_channel_io_normal:
13642 /* Non-fatal error, prepare for recovery */
13643 lpfc_sli4_prep_dev_for_recover(phba);
13644 return PCI_ERS_RESULT_CAN_RECOVER;
13645 case pci_channel_io_frozen:
13646 /* Fatal error, prepare for slot reset */
13647 lpfc_sli4_prep_dev_for_reset(phba);
13648 return PCI_ERS_RESULT_NEED_RESET;
13649 case pci_channel_io_perm_failure:
13650 /* Permanent failure, prepare for device down */
13651 lpfc_sli4_prep_dev_for_perm_failure(phba);
13652 return PCI_ERS_RESULT_DISCONNECT;
13654 /* Unknown state, prepare and request slot reset */
13655 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13656 "2825 Unknown PCI error state: x%x\n", state);
13657 lpfc_sli4_prep_dev_for_reset(phba);
13658 return PCI_ERS_RESULT_NEED_RESET;
13663 * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
13664 * @pdev: pointer to PCI device.
13666 * This routine is called from the PCI subsystem for error handling to device
13667 * with SLI-4 interface spec. It is called after PCI bus has been reset to
13668 * restart the PCI card from scratch, as if from a cold-boot. During the
13669 * PCI subsystem error recovery, after the driver returns
13670 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
13671 * recovery and then call this routine before calling the .resume method to
13672 * recover the device. This function will initialize the HBA device, enable
13673 * the interrupt, but it will just put the HBA to offline state without
13674 * passing any I/O traffic.
13677 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
13678 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
13680 static pci_ers_result_t
13681 lpfc_io_slot_reset_s4(struct pci_dev *pdev)
13683 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13684 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13685 struct lpfc_sli *psli = &phba->sli;
13686 uint32_t intr_mode;
13688 dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
13689 if (pci_enable_device_mem(pdev)) {
13690 printk(KERN_ERR "lpfc: Cannot re-enable "
13691 "PCI device after reset.\n");
13692 return PCI_ERS_RESULT_DISCONNECT;
13695 pci_restore_state(pdev);
13698 * As the new kernel behavior of pci_restore_state() API call clears
13699 * device saved_state flag, need to save the restored state again.
13701 pci_save_state(pdev);
13703 if (pdev->is_busmaster)
13704 pci_set_master(pdev);
13706 spin_lock_irq(&phba->hbalock);
13707 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
13708 spin_unlock_irq(&phba->hbalock);
13710 /* Configure and enable interrupt */
13711 intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
13712 if (intr_mode == LPFC_INTR_ERROR) {
13713 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13714 "2824 Cannot re-enable interrupt after "
13716 return PCI_ERS_RESULT_DISCONNECT;
13718 phba->intr_mode = intr_mode;
13720 /* Log the current active interrupt mode */
13721 lpfc_log_intr_mode(phba, phba->intr_mode);
13723 return PCI_ERS_RESULT_RECOVERED;
13727 * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
13728 * @pdev: pointer to PCI device
13730 * This routine is called from the PCI subsystem for error handling to device
13731 * with SLI-4 interface spec. It is called when kernel error recovery tells
13732 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
13733 * error recovery. After this call, traffic can start to flow from this device
13737 lpfc_io_resume_s4(struct pci_dev *pdev)
13739 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13740 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13743 * In case of slot reset, as function reset is performed through
13744 * mailbox command which needs DMA to be enabled, this operation
13745 * has to be moved to the io resume phase. Taking device offline
13746 * will perform the necessary cleanup.
13748 if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) {
13749 /* Perform device reset */
13750 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
13751 lpfc_offline(phba);
13752 lpfc_sli_brdrestart(phba);
13753 /* Bring the device back online */
13759 * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
13760 * @pdev: pointer to PCI device
13761 * @pid: pointer to PCI device identifier
13763 * This routine is to be registered to the kernel's PCI subsystem. When an
13764 * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
13765 * at PCI device-specific information of the device and driver to see if the
13766 * driver state that it can support this kind of device. If the match is
13767 * successful, the driver core invokes this routine. This routine dispatches
13768 * the action to the proper SLI-3 or SLI-4 device probing routine, which will
13769 * do all the initialization that it needs to do to handle the HBA device
13773 * 0 - driver can claim the device
13774 * negative value - driver can not claim the device
13777 lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
13780 struct lpfc_sli_intf intf;
13782 if (pci_read_config_dword(pdev, LPFC_SLI_INTF, &intf.word0))
13785 if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
13786 (bf_get(lpfc_sli_intf_slirev, &intf) == LPFC_SLI_INTF_REV_SLI4))
13787 rc = lpfc_pci_probe_one_s4(pdev, pid);
13789 rc = lpfc_pci_probe_one_s3(pdev, pid);
13795 * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
13796 * @pdev: pointer to PCI device
13798 * This routine is to be registered to the kernel's PCI subsystem. When an
13799 * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
13800 * This routine dispatches the action to the proper SLI-3 or SLI-4 device
13801 * remove routine, which will perform all the necessary cleanup for the
13802 * device to be removed from the PCI subsystem properly.
13805 lpfc_pci_remove_one(struct pci_dev *pdev)
13807 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13808 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13810 switch (phba->pci_dev_grp) {
13811 case LPFC_PCI_DEV_LP:
13812 lpfc_pci_remove_one_s3(pdev);
13814 case LPFC_PCI_DEV_OC:
13815 lpfc_pci_remove_one_s4(pdev);
13818 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13819 "1424 Invalid PCI device group: 0x%x\n",
13820 phba->pci_dev_grp);
13827 * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
13828 * @pdev: pointer to PCI device
13829 * @msg: power management message
13831 * This routine is to be registered to the kernel's PCI subsystem to support
13832 * system Power Management (PM). When PM invokes this method, it dispatches
13833 * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
13834 * suspend the device.
13837 * 0 - driver suspended the device
13841 lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
13843 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13844 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13847 switch (phba->pci_dev_grp) {
13848 case LPFC_PCI_DEV_LP:
13849 rc = lpfc_pci_suspend_one_s3(pdev, msg);
13851 case LPFC_PCI_DEV_OC:
13852 rc = lpfc_pci_suspend_one_s4(pdev, msg);
13855 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13856 "1425 Invalid PCI device group: 0x%x\n",
13857 phba->pci_dev_grp);
13864 * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
13865 * @pdev: pointer to PCI device
13867 * This routine is to be registered to the kernel's PCI subsystem to support
13868 * system Power Management (PM). When PM invokes this method, it dispatches
13869 * the action to the proper SLI-3 or SLI-4 device resume routine, which will
13870 * resume the device.
13873 * 0 - driver suspended the device
13877 lpfc_pci_resume_one(struct pci_dev *pdev)
13879 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13880 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13883 switch (phba->pci_dev_grp) {
13884 case LPFC_PCI_DEV_LP:
13885 rc = lpfc_pci_resume_one_s3(pdev);
13887 case LPFC_PCI_DEV_OC:
13888 rc = lpfc_pci_resume_one_s4(pdev);
13891 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13892 "1426 Invalid PCI device group: 0x%x\n",
13893 phba->pci_dev_grp);
13900 * lpfc_io_error_detected - lpfc method for handling PCI I/O error
13901 * @pdev: pointer to PCI device.
13902 * @state: the current PCI connection state.
13904 * This routine is registered to the PCI subsystem for error handling. This
13905 * function is called by the PCI subsystem after a PCI bus error affecting
13906 * this device has been detected. When this routine is invoked, it dispatches
13907 * the action to the proper SLI-3 or SLI-4 device error detected handling
13908 * routine, which will perform the proper error detected operation.
13911 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
13912 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
13914 static pci_ers_result_t
13915 lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
13917 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13918 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13919 pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
13921 switch (phba->pci_dev_grp) {
13922 case LPFC_PCI_DEV_LP:
13923 rc = lpfc_io_error_detected_s3(pdev, state);
13925 case LPFC_PCI_DEV_OC:
13926 rc = lpfc_io_error_detected_s4(pdev, state);
13929 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13930 "1427 Invalid PCI device group: 0x%x\n",
13931 phba->pci_dev_grp);
13938 * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
13939 * @pdev: pointer to PCI device.
13941 * This routine is registered to the PCI subsystem for error handling. This
13942 * function is called after PCI bus has been reset to restart the PCI card
13943 * from scratch, as if from a cold-boot. When this routine is invoked, it
13944 * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
13945 * routine, which will perform the proper device reset.
13948 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
13949 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
13951 static pci_ers_result_t
13952 lpfc_io_slot_reset(struct pci_dev *pdev)
13954 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13955 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13956 pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
13958 switch (phba->pci_dev_grp) {
13959 case LPFC_PCI_DEV_LP:
13960 rc = lpfc_io_slot_reset_s3(pdev);
13962 case LPFC_PCI_DEV_OC:
13963 rc = lpfc_io_slot_reset_s4(pdev);
13966 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13967 "1428 Invalid PCI device group: 0x%x\n",
13968 phba->pci_dev_grp);
13975 * lpfc_io_resume - lpfc method for resuming PCI I/O operation
13976 * @pdev: pointer to PCI device
13978 * This routine is registered to the PCI subsystem for error handling. It
13979 * is called when kernel error recovery tells the lpfc driver that it is
13980 * OK to resume normal PCI operation after PCI bus error recovery. When
13981 * this routine is invoked, it dispatches the action to the proper SLI-3
13982 * or SLI-4 device io_resume routine, which will resume the device operation.
13985 lpfc_io_resume(struct pci_dev *pdev)
13987 struct Scsi_Host *shost = pci_get_drvdata(pdev);
13988 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
13990 switch (phba->pci_dev_grp) {
13991 case LPFC_PCI_DEV_LP:
13992 lpfc_io_resume_s3(pdev);
13994 case LPFC_PCI_DEV_OC:
13995 lpfc_io_resume_s4(pdev);
13998 lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
13999 "1429 Invalid PCI device group: 0x%x\n",
14000 phba->pci_dev_grp);
14007 * lpfc_sli4_oas_verify - Verify OAS is supported by this adapter
14008 * @phba: pointer to lpfc hba data structure.
14010 * This routine checks to see if OAS is supported for this adapter. If
14011 * supported, the configure Flash Optimized Fabric flag is set. Otherwise,
14012 * the enable oas flag is cleared and the pool created for OAS device data
14017 lpfc_sli4_oas_verify(struct lpfc_hba *phba)
14020 if (!phba->cfg_EnableXLane)
14023 if (phba->sli4_hba.pc_sli4_params.oas_supported) {
14027 mempool_destroy(phba->device_data_mem_pool);
14028 phba->device_data_mem_pool = NULL;
14035 * lpfc_sli4_ras_init - Verify RAS-FW log is supported by this adapter
14036 * @phba: pointer to lpfc hba data structure.
14038 * This routine checks to see if RAS is supported by the adapter. Check the
14039 * function through which RAS support enablement is to be done.
14042 lpfc_sli4_ras_init(struct lpfc_hba *phba)
14044 switch (phba->pcidev->device) {
14045 case PCI_DEVICE_ID_LANCER_G6_FC:
14046 case PCI_DEVICE_ID_LANCER_G7_FC:
14047 phba->ras_fwlog.ras_hwsupport = true;
14048 if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn) &&
14049 phba->cfg_ras_fwlog_buffsize)
14050 phba->ras_fwlog.ras_enabled = true;
14052 phba->ras_fwlog.ras_enabled = false;
14055 phba->ras_fwlog.ras_hwsupport = false;
14060 MODULE_DEVICE_TABLE(pci, lpfc_id_table);
14062 static const struct pci_error_handlers lpfc_err_handler = {
14063 .error_detected = lpfc_io_error_detected,
14064 .slot_reset = lpfc_io_slot_reset,
14065 .resume = lpfc_io_resume,
14068 static struct pci_driver lpfc_driver = {
14069 .name = LPFC_DRIVER_NAME,
14070 .id_table = lpfc_id_table,
14071 .probe = lpfc_pci_probe_one,
14072 .remove = lpfc_pci_remove_one,
14073 .shutdown = lpfc_pci_remove_one,
14074 .suspend = lpfc_pci_suspend_one,
14075 .resume = lpfc_pci_resume_one,
14076 .err_handler = &lpfc_err_handler,
14079 static const struct file_operations lpfc_mgmt_fop = {
14080 .owner = THIS_MODULE,
14083 static struct miscdevice lpfc_mgmt_dev = {
14084 .minor = MISC_DYNAMIC_MINOR,
14085 .name = "lpfcmgmt",
14086 .fops = &lpfc_mgmt_fop,
14090 * lpfc_init - lpfc module initialization routine
14092 * This routine is to be invoked when the lpfc module is loaded into the
14093 * kernel. The special kernel macro module_init() is used to indicate the
14094 * role of this routine to the kernel as lpfc module entry point.
14098 * -ENOMEM - FC attach transport failed
14099 * all others - failed
14106 pr_info(LPFC_MODULE_DESC "\n");
14107 pr_info(LPFC_COPYRIGHT "\n");
14109 error = misc_register(&lpfc_mgmt_dev);
14111 printk(KERN_ERR "Could not register lpfcmgmt device, "
14112 "misc_register returned with status %d", error);
14115 lpfc_transport_functions.vport_create = lpfc_vport_create;
14116 lpfc_transport_functions.vport_delete = lpfc_vport_delete;
14117 lpfc_transport_template =
14118 fc_attach_transport(&lpfc_transport_functions);
14119 if (lpfc_transport_template == NULL)
14121 lpfc_vport_transport_template =
14122 fc_attach_transport(&lpfc_vport_transport_functions);
14123 if (lpfc_vport_transport_template == NULL) {
14124 fc_release_transport(lpfc_transport_template);
14127 lpfc_nvme_cmd_template();
14128 lpfc_nvmet_cmd_template();
14130 /* Initialize in case vector mapping is needed */
14131 lpfc_present_cpu = num_present_cpus();
14133 error = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
14134 "lpfc/sli4:online",
14135 lpfc_cpu_online, lpfc_cpu_offline);
14137 goto cpuhp_failure;
14138 lpfc_cpuhp_state = error;
14140 error = pci_register_driver(&lpfc_driver);
14147 cpuhp_remove_multi_state(lpfc_cpuhp_state);
14149 fc_release_transport(lpfc_transport_template);
14150 fc_release_transport(lpfc_vport_transport_template);
14152 misc_deregister(&lpfc_mgmt_dev);
14157 void lpfc_dmp_dbg(struct lpfc_hba *phba)
14159 unsigned int start_idx;
14160 unsigned int dbg_cnt;
14161 unsigned int temp_idx;
14164 unsigned long rem_nsec;
14166 if (phba->cfg_log_verbose)
14169 if (atomic_cmpxchg(&phba->dbg_log_dmping, 0, 1) != 0)
14172 start_idx = (unsigned int)atomic_read(&phba->dbg_log_idx) % DBG_LOG_SZ;
14173 dbg_cnt = (unsigned int)atomic_read(&phba->dbg_log_cnt);
14174 temp_idx = start_idx;
14175 if (dbg_cnt >= DBG_LOG_SZ) {
14176 dbg_cnt = DBG_LOG_SZ;
14179 if ((start_idx + dbg_cnt) > (DBG_LOG_SZ - 1)) {
14180 temp_idx = (start_idx + dbg_cnt) % DBG_LOG_SZ;
14182 if (start_idx < dbg_cnt)
14183 start_idx = DBG_LOG_SZ - (dbg_cnt - start_idx);
14185 start_idx -= dbg_cnt;
14188 dev_info(&phba->pcidev->dev, "start %d end %d cnt %d\n",
14189 start_idx, temp_idx, dbg_cnt);
14191 for (i = 0; i < dbg_cnt; i++) {
14192 if ((start_idx + i) < DBG_LOG_SZ)
14193 temp_idx = (start_idx + i) % DBG_LOG_SZ;
14196 rem_nsec = do_div(phba->dbg_log[temp_idx].t_ns, NSEC_PER_SEC);
14197 dev_info(&phba->pcidev->dev, "%d: [%5lu.%06lu] %s",
14199 (unsigned long)phba->dbg_log[temp_idx].t_ns,
14201 phba->dbg_log[temp_idx].log);
14203 atomic_set(&phba->dbg_log_cnt, 0);
14204 atomic_set(&phba->dbg_log_dmping, 0);
14208 void lpfc_dbg_print(struct lpfc_hba *phba, const char *fmt, ...)
14212 int dbg_dmping = atomic_read(&phba->dbg_log_dmping);
14213 struct va_format vaf;
14216 va_start(args, fmt);
14217 if (unlikely(dbg_dmping)) {
14220 dev_info(&phba->pcidev->dev, "%pV", &vaf);
14224 idx = (unsigned int)atomic_fetch_add(1, &phba->dbg_log_idx) %
14227 atomic_inc(&phba->dbg_log_cnt);
14229 vscnprintf(phba->dbg_log[idx].log,
14230 sizeof(phba->dbg_log[idx].log), fmt, args);
14233 phba->dbg_log[idx].t_ns = local_clock();
14237 * lpfc_exit - lpfc module removal routine
14239 * This routine is invoked when the lpfc module is removed from the kernel.
14240 * The special kernel macro module_exit() is used to indicate the role of
14241 * this routine to the kernel as lpfc module exit point.
14246 misc_deregister(&lpfc_mgmt_dev);
14247 pci_unregister_driver(&lpfc_driver);
14248 cpuhp_remove_multi_state(lpfc_cpuhp_state);
14249 fc_release_transport(lpfc_transport_template);
14250 fc_release_transport(lpfc_vport_transport_template);
14251 idr_destroy(&lpfc_hba_index);
14254 module_init(lpfc_init);
14255 module_exit(lpfc_exit);
14256 MODULE_LICENSE("GPL");
14257 MODULE_DESCRIPTION(LPFC_MODULE_DESC);
14258 MODULE_AUTHOR("Broadcom");
14259 MODULE_VERSION("0:" LPFC_DRIVER_VERSION);