2 * Support for SATA devices on Serial Attached SCSI (SAS) controllers
4 * Copyright (C) 2006 IBM Corporation
6 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of the
11 * License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
24 #include <linux/scatterlist.h>
25 #include <linux/slab.h>
26 #include <linux/async.h>
27 #include <linux/export.h>
29 #include <scsi/sas_ata.h>
30 #include "sas_internal.h"
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_tcq.h>
34 #include <scsi/scsi.h>
35 #include <scsi/scsi_transport.h>
36 #include <scsi/scsi_transport_sas.h>
37 #include "../scsi_sas_internal.h"
38 #include "../scsi_transport_api.h"
39 #include <scsi/scsi_eh.h>
41 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
43 /* Cheesy attempt to translate SAS errors into ATA. Hah! */
46 if (ts->resp == SAS_TASK_UNDELIVERED)
47 return AC_ERR_ATA_BUS;
49 /* ts->resp == SAS_TASK_COMPLETE */
50 /* task delivered, what happened afterwards? */
52 case SAS_DEV_NO_RESPONSE:
53 return AC_ERR_TIMEOUT;
58 return AC_ERR_ATA_BUS;
61 case SAS_DATA_UNDERRUN:
63 * Some programs that use the taskfile interface
64 * (smartctl in particular) can cause underrun
65 * problems. Ignore these errors, perhaps at our
70 case SAS_DATA_OVERRUN:
72 case SAS_DEVICE_UNKNOWN:
74 return AC_ERR_INVALID;
78 SAS_DPRINTK("%s: Saw error %d. What to do?\n",
82 case SAM_STAT_CHECK_CONDITION:
83 case SAS_ABORTED_TASK:
86 case SAS_PROTO_RESPONSE:
87 /* This means the ending_fis has the error
88 * value; return 0 here to collect it */
95 static void sas_ata_task_done(struct sas_task *task)
97 struct ata_queued_cmd *qc = task->uldd_task;
98 struct domain_device *dev = task->dev;
99 struct task_status_struct *stat = &task->task_status;
100 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
101 struct sas_ha_struct *sas_ha = dev->port->ha;
102 enum ata_completion_errors ac;
104 struct ata_link *link;
107 spin_lock_irqsave(&dev->done_lock, flags);
108 if (test_bit(SAS_HA_FROZEN, &sas_ha->state))
110 else if (qc && qc->scsicmd)
111 ASSIGN_SAS_TASK(qc->scsicmd, NULL);
112 spin_unlock_irqrestore(&dev->done_lock, flags);
114 /* check if libsas-eh got to the task before us */
119 goto qc_already_gone;
124 spin_lock_irqsave(ap->lock, flags);
125 /* check if we lost the race with libata/sas_ata_post_internal() */
126 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) {
127 spin_unlock_irqrestore(ap->lock, flags);
129 goto qc_already_gone;
131 /* if eh is not involved and the port is frozen then the
132 * ata internal abort process has taken responsibility
139 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
140 ((stat->stat == SAM_STAT_CHECK_CONDITION &&
141 dev->sata_dev.class == ATA_DEV_ATAPI))) {
142 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
144 if (!link->sactive) {
145 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
147 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
148 if (unlikely(link->eh_info.err_mask))
149 qc->flags |= ATA_QCFLAG_FAILED;
152 ac = sas_to_ata_err(stat);
154 SAS_DPRINTK("%s: SAS error %x\n", __func__,
156 /* We saw a SAS error. Send a vague error. */
157 if (!link->sactive) {
160 link->eh_info.err_mask |= AC_ERR_DEV;
161 qc->flags |= ATA_QCFLAG_FAILED;
164 dev->sata_dev.fis[3] = 0x04; /* status err */
165 dev->sata_dev.fis[2] = ATA_ERR;
169 qc->lldd_task = NULL;
171 spin_unlock_irqrestore(ap->lock, flags);
177 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
180 struct sas_task *task;
181 struct scatterlist *sg;
182 int ret = AC_ERR_SYSTEM;
183 unsigned int si, xfer = 0;
184 struct ata_port *ap = qc->ap;
185 struct domain_device *dev = ap->private_data;
186 struct sas_ha_struct *sas_ha = dev->port->ha;
187 struct Scsi_Host *host = sas_ha->core.shost;
188 struct sas_internal *i = to_sas_internal(host->transportt);
190 /* TODO: audit callers to ensure they are ready for qc_issue to
191 * unconditionally re-enable interrupts
193 local_irq_save(flags);
194 spin_unlock(ap->lock);
196 /* If the device fell off, no sense in issuing commands */
197 if (test_bit(SAS_DEV_GONE, &dev->state))
200 task = sas_alloc_task(GFP_ATOMIC);
204 task->task_proto = SAS_PROTOCOL_STP;
205 task->task_done = sas_ata_task_done;
207 if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
208 qc->tf.command == ATA_CMD_FPDMA_READ) {
209 /* Need to zero out the tag libata assigned us */
213 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
214 task->uldd_task = qc;
215 if (ata_is_atapi(qc->tf.protocol)) {
216 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
217 task->total_xfer_len = qc->nbytes;
218 task->num_scatter = qc->n_elem;
220 for_each_sg(qc->sg, sg, qc->n_elem, si)
223 task->total_xfer_len = xfer;
224 task->num_scatter = si;
227 task->data_dir = qc->dma_dir;
228 task->scatter = qc->sg;
229 task->ata_task.retry_count = 1;
230 task->task_state_flags = SAS_TASK_STATE_PENDING;
231 qc->lldd_task = task;
233 switch (qc->tf.protocol) {
235 task->ata_task.use_ncq = 1;
239 task->ata_task.dma_xfer = 1;
244 ASSIGN_SAS_TASK(qc->scsicmd, task);
246 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
248 SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
251 ASSIGN_SAS_TASK(qc->scsicmd, NULL);
258 local_irq_restore(flags);
262 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
264 struct domain_device *dev = qc->ap->private_data;
266 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
270 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
272 return to_sas_internal(dev->port->ha->core.shost->transportt);
275 static int sas_get_ata_command_set(struct domain_device *dev);
277 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
279 if (phy->attached_tproto & SAS_PROTOCOL_STP)
280 dev->tproto = phy->attached_tproto;
281 if (phy->attached_sata_dev)
282 dev->tproto |= SAS_SATA_DEV;
284 if (phy->attached_dev_type == SAS_SATA_PENDING)
285 dev->dev_type = SAS_SATA_PENDING;
289 dev->dev_type = SAS_SATA_DEV;
290 res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
291 &dev->sata_dev.rps_resp);
293 SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
294 "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
298 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
299 sizeof(struct dev_to_host_fis));
300 dev->sata_dev.class = sas_get_ata_command_set(dev);
305 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
309 /* we weren't pending, so successfully end the reset sequence now */
310 if (dev->dev_type != SAS_SATA_PENDING)
313 /* hmmm, if this succeeds do we need to repost the domain_device to the
314 * lldd so it can pick up new parameters?
316 res = sas_get_ata_info(dev, phy);
318 return 0; /* retry */
323 static int smp_ata_check_ready(struct ata_link *link)
326 struct ata_port *ap = link->ap;
327 struct domain_device *dev = ap->private_data;
328 struct domain_device *ex_dev = dev->parent;
329 struct sas_phy *phy = sas_get_local_phy(dev);
330 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
332 res = sas_ex_phy_discover(ex_dev, phy->number);
333 sas_put_local_phy(phy);
335 /* break the wait early if the expander is unreachable,
336 * otherwise keep polling
340 if (res != SMP_RESP_FUNC_ACC)
343 switch (ex_phy->attached_dev_type) {
344 case SAS_SATA_PENDING:
347 if (ex_phy->attached_sata_dev)
348 return sas_ata_clear_pending(dev, ex_phy);
354 static int local_ata_check_ready(struct ata_link *link)
356 struct ata_port *ap = link->ap;
357 struct domain_device *dev = ap->private_data;
358 struct sas_internal *i = dev_to_sas_internal(dev);
360 if (i->dft->lldd_ata_check_ready)
361 return i->dft->lldd_ata_check_ready(dev);
363 /* lldd's that don't implement 'ready' checking get the
364 * old default behavior of not coordinating reset
365 * recovery with libata
371 static int sas_ata_printk(const char *level, const struct domain_device *ddev,
372 const char *fmt, ...)
374 struct ata_port *ap = ddev->sata_dev.ap;
375 struct device *dev = &ddev->rphy->dev;
376 struct va_format vaf;
385 r = printk("%ssas: ata%u: %s: %pV",
386 level, ap->print_id, dev_name(dev), &vaf);
393 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
394 unsigned long deadline)
398 struct ata_port *ap = link->ap;
399 int (*check_ready)(struct ata_link *link);
400 struct domain_device *dev = ap->private_data;
401 struct sas_internal *i = dev_to_sas_internal(dev);
403 res = i->dft->lldd_I_T_nexus_reset(dev);
407 if (res != TMF_RESP_FUNC_COMPLETE)
408 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n");
410 phy = sas_get_local_phy(dev);
411 if (scsi_is_sas_phy_local(phy))
412 check_ready = local_ata_check_ready;
414 check_ready = smp_ata_check_ready;
415 sas_put_local_phy(phy);
417 ret = ata_wait_after_reset(link, deadline, check_ready);
418 if (ret && ret != -EAGAIN)
419 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
421 *class = dev->sata_dev.class;
423 ap->cbl = ATA_CBL_SATA;
428 * notify the lldd to forget the sas_task for this internal ata command
429 * that bypasses scsi-eh
431 static void sas_ata_internal_abort(struct sas_task *task)
433 struct sas_internal *si = dev_to_sas_internal(task->dev);
437 spin_lock_irqsave(&task->task_state_lock, flags);
438 if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
439 task->task_state_flags & SAS_TASK_STATE_DONE) {
440 spin_unlock_irqrestore(&task->task_state_lock, flags);
441 SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
445 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
446 spin_unlock_irqrestore(&task->task_state_lock, flags);
448 res = si->dft->lldd_abort_task(task);
450 spin_lock_irqsave(&task->task_state_lock, flags);
451 if (task->task_state_flags & SAS_TASK_STATE_DONE ||
452 res == TMF_RESP_FUNC_COMPLETE) {
453 spin_unlock_irqrestore(&task->task_state_lock, flags);
457 /* XXX we are not prepared to deal with ->lldd_abort_task()
458 * failures. TODO: lldds need to unconditionally forget about
459 * aborted ata tasks, otherwise we (likely) leak the sas task
462 SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
464 if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
465 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
466 spin_unlock_irqrestore(&task->task_state_lock, flags);
473 static void sas_ata_post_internal(struct ata_queued_cmd *qc)
475 if (qc->flags & ATA_QCFLAG_FAILED)
476 qc->err_mask |= AC_ERR_OTHER;
480 * Find the sas_task and kill it. By this point, libata
481 * has decided to kill the qc and has frozen the port.
482 * In this state sas_ata_task_done() will no longer free
483 * the sas_task, so we need to notify the lldd (via
484 * ->lldd_abort_task) that the task is dead and free it
487 struct sas_task *task = qc->lldd_task;
489 qc->lldd_task = NULL;
492 task->uldd_task = NULL;
493 sas_ata_internal_abort(task);
498 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
500 struct domain_device *dev = ap->private_data;
501 struct sas_internal *i = dev_to_sas_internal(dev);
503 if (i->dft->lldd_ata_set_dmamode)
504 i->dft->lldd_ata_set_dmamode(dev);
507 static void sas_ata_sched_eh(struct ata_port *ap)
509 struct domain_device *dev = ap->private_data;
510 struct sas_ha_struct *ha = dev->port->ha;
513 spin_lock_irqsave(&ha->lock, flags);
514 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state))
516 ata_std_sched_eh(ap);
517 spin_unlock_irqrestore(&ha->lock, flags);
520 void sas_ata_end_eh(struct ata_port *ap)
522 struct domain_device *dev = ap->private_data;
523 struct sas_ha_struct *ha = dev->port->ha;
526 spin_lock_irqsave(&ha->lock, flags);
527 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state))
529 spin_unlock_irqrestore(&ha->lock, flags);
532 static struct ata_port_operations sas_sata_ops = {
533 .prereset = ata_std_prereset,
534 .hardreset = sas_ata_hard_reset,
535 .postreset = ata_std_postreset,
536 .error_handler = ata_std_error_handler,
537 .post_internal_cmd = sas_ata_post_internal,
538 .qc_defer = ata_std_qc_defer,
539 .qc_prep = ata_noop_qc_prep,
540 .qc_issue = sas_ata_qc_issue,
541 .qc_fill_rtf = sas_ata_qc_fill_rtf,
542 .port_start = ata_sas_port_start,
543 .port_stop = ata_sas_port_stop,
544 .set_dmamode = sas_ata_set_dmamode,
545 .sched_eh = sas_ata_sched_eh,
546 .end_eh = sas_ata_end_eh,
549 static struct ata_port_info sata_port_info = {
550 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ |
552 .pio_mask = ATA_PIO4,
553 .mwdma_mask = ATA_MWDMA2,
554 .udma_mask = ATA_UDMA6,
555 .port_ops = &sas_sata_ops
558 int sas_ata_init(struct domain_device *found_dev)
560 struct sas_ha_struct *ha = found_dev->port->ha;
561 struct Scsi_Host *shost = ha->core.shost;
565 ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, &sas_sata_ops);
566 ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
570 SAS_DPRINTK("ata_sas_port_alloc failed.\n");
574 ap->private_data = found_dev;
575 ap->cbl = ATA_CBL_SATA;
576 ap->scsi_host = shost;
577 rc = ata_sas_port_init(ap);
579 ata_sas_port_destroy(ap);
582 found_dev->sata_dev.ap = ap;
587 void sas_ata_task_abort(struct sas_task *task)
589 struct ata_queued_cmd *qc = task->uldd_task;
590 struct completion *waiting;
592 /* Bounce SCSI-initiated commands to the SCSI EH */
594 struct request_queue *q = qc->scsicmd->device->request_queue;
597 spin_lock_irqsave(q->queue_lock, flags);
598 blk_abort_request(qc->scsicmd->request);
599 spin_unlock_irqrestore(q->queue_lock, flags);
603 /* Internal command, fake a timeout and complete. */
604 qc->flags &= ~ATA_QCFLAG_ACTIVE;
605 qc->flags |= ATA_QCFLAG_FAILED;
606 qc->err_mask |= AC_ERR_TIMEOUT;
607 waiting = qc->private_data;
611 static int sas_get_ata_command_set(struct domain_device *dev)
613 struct dev_to_host_fis *fis =
614 (struct dev_to_host_fis *) dev->frame_rcvd;
615 struct ata_taskfile tf;
617 if (dev->dev_type == SAS_SATA_PENDING)
618 return ATA_DEV_UNKNOWN;
620 ata_tf_from_fis((const u8 *)fis, &tf);
622 return ata_dev_classify(&tf);
625 void sas_probe_sata(struct asd_sas_port *port)
627 struct domain_device *dev, *n;
629 mutex_lock(&port->ha->disco_mutex);
630 list_for_each_entry(dev, &port->disco_list, disco_list_node) {
631 if (!dev_is_sata(dev))
634 ata_sas_async_probe(dev->sata_dev.ap);
636 mutex_unlock(&port->ha->disco_mutex);
638 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
639 if (!dev_is_sata(dev))
642 sas_ata_wait_eh(dev);
644 /* if libata could not bring the link up, don't surface
647 if (ata_dev_disabled(sas_to_ata_dev(dev)))
648 sas_fail_probe(dev, __func__, -ENODEV);
653 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
655 struct domain_device *dev, *n;
657 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
658 if (!dev_is_sata(dev))
661 sas_ata_wait_eh(dev);
663 /* if libata failed to power manage the device, tear it down */
664 if (ata_dev_disabled(sas_to_ata_dev(dev)))
665 sas_fail_probe(dev, func, -ENODEV);
669 void sas_suspend_sata(struct asd_sas_port *port)
671 struct domain_device *dev;
673 mutex_lock(&port->ha->disco_mutex);
674 list_for_each_entry(dev, &port->dev_list, dev_list_node) {
675 struct sata_device *sata;
677 if (!dev_is_sata(dev))
680 sata = &dev->sata_dev;
681 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
684 ata_sas_port_suspend(sata->ap);
686 mutex_unlock(&port->ha->disco_mutex);
688 sas_ata_flush_pm_eh(port, __func__);
691 void sas_resume_sata(struct asd_sas_port *port)
693 struct domain_device *dev;
695 mutex_lock(&port->ha->disco_mutex);
696 list_for_each_entry(dev, &port->dev_list, dev_list_node) {
697 struct sata_device *sata;
699 if (!dev_is_sata(dev))
702 sata = &dev->sata_dev;
703 if (sata->ap->pm_mesg.event == PM_EVENT_ON)
706 ata_sas_port_resume(sata->ap);
708 mutex_unlock(&port->ha->disco_mutex);
710 sas_ata_flush_pm_eh(port, __func__);
714 * sas_discover_sata -- discover an STP/SATA domain device
715 * @dev: pointer to struct domain_device of interest
717 * Devices directly attached to a HA port, have no parents. All other
718 * devices do, and should have their "parent" pointer set appropriately
719 * before calling this function.
721 int sas_discover_sata(struct domain_device *dev)
725 if (dev->dev_type == SAS_SATA_PM)
728 dev->sata_dev.class = sas_get_ata_command_set(dev);
729 sas_fill_in_rphy(dev, dev->rphy);
731 res = sas_notify_lldd_dev_found(dev);
735 sas_discover_event(dev->port, DISCE_PROBE);
739 static void async_sas_ata_eh(void *data, async_cookie_t cookie)
741 struct domain_device *dev = data;
742 struct ata_port *ap = dev->sata_dev.ap;
743 struct sas_ha_struct *ha = dev->port->ha;
745 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
746 ata_scsi_port_error_handler(ha->core.shost, ap);
750 void sas_ata_strategy_handler(struct Scsi_Host *shost)
752 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
753 ASYNC_DOMAIN_EXCLUSIVE(async);
756 /* it's ok to defer revalidation events during ata eh, these
757 * disks are in one of three states:
758 * 1/ present for initial domain discovery, and these
759 * resets will cause bcn flutters
760 * 2/ hot removed, we'll discover that after eh fails
761 * 3/ hot added after initial discovery, lost the race, and need
762 * to catch the next train.
764 sas_disable_revalidation(sas_ha);
766 spin_lock_irq(&sas_ha->phy_port_lock);
767 for (i = 0; i < sas_ha->num_phys; i++) {
768 struct asd_sas_port *port = sas_ha->sas_port[i];
769 struct domain_device *dev;
771 spin_lock(&port->dev_list_lock);
772 list_for_each_entry(dev, &port->dev_list, dev_list_node) {
773 if (!dev_is_sata(dev))
776 /* hold a reference over eh since we may be
777 * racing with final remove once all commands
780 kref_get(&dev->kref);
782 async_schedule_domain(async_sas_ata_eh, dev, &async);
784 spin_unlock(&port->dev_list_lock);
786 spin_unlock_irq(&sas_ha->phy_port_lock);
788 async_synchronize_full_domain(&async);
790 sas_enable_revalidation(sas_ha);
793 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
794 struct list_head *done_q)
796 struct scsi_cmnd *cmd, *n;
797 struct domain_device *eh_dev;
803 list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
804 struct domain_device *ddev = cmd_to_domain_dev(cmd);
806 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
808 if (eh_dev && eh_dev != ddev)
811 list_move(&cmd->eh_entry, &sata_q);
814 if (!list_empty(&sata_q)) {
815 struct ata_port *ap = eh_dev->sata_dev.ap;
817 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n");
818 ata_scsi_cmd_error_handler(shost, ap, &sata_q);
820 * ata's error handler may leave the cmd on the list
821 * so make sure they don't remain on a stack list
822 * about to go out of scope.
824 * This looks strange, since the commands are
825 * now part of no list, but the next error
826 * action will be ata_port_error_handler()
827 * which takes no list and sweeps them up
828 * anyway from the ata tag array.
830 while (!list_empty(&sata_q))
831 list_del_init(sata_q.next);
836 void sas_ata_schedule_reset(struct domain_device *dev)
838 struct ata_eh_info *ehi;
842 if (!dev_is_sata(dev))
845 ap = dev->sata_dev.ap;
846 ehi = &ap->link.eh_info;
848 spin_lock_irqsave(ap->lock, flags);
849 ehi->err_mask |= AC_ERR_TIMEOUT;
850 ehi->action |= ATA_EH_RESET;
851 ata_port_schedule_eh(ap);
852 spin_unlock_irqrestore(ap->lock, flags);
854 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset);
856 void sas_ata_wait_eh(struct domain_device *dev)
860 if (!dev_is_sata(dev))
863 ap = dev->sata_dev.ap;
864 ata_port_wait_eh(ap);