Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/roste...
[linux-2.6-microblaze.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 static struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE             0               /* cmd is free */
49 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
51 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
52 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
53 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
54 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
56
57 #define FC_SRB_READ             (1 << 1)
58 #define FC_SRB_WRITE            (1 << 0)
59
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
68
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79         mempool_t               *scsi_pkt_pool;
80         spinlock_t              scsi_queue_lock;
81         struct list_head        scsi_pkt_queue;
82         unsigned long           last_can_queue_ramp_down_time;
83         unsigned long           last_can_queue_ramp_up_time;
84         int                     max_can_queue;
85 };
86
87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
88
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE             0
114 #define FC_CMD_ABORTED          1
115 #define FC_CMD_RESET            2
116 #define FC_CMD_PLOGO            3
117 #define FC_SNS_RCV              4
118 #define FC_TRANS_ERR            5
119 #define FC_DATA_OVRRUN          6
120 #define FC_DATA_UNDRUN          7
121 #define FC_ERROR                8
122 #define FC_HRD_ERROR            9
123 #define FC_CRC_ERROR            10
124 #define FC_TIMED_OUT            11
125
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV          (10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
132
133 #define FC_MAX_ERROR_CNT        5
134 #define FC_MAX_RECOV_RETRY      3
135
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:      Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149         struct fc_fcp_pkt *fsp;
150
151         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152         if (fsp) {
153                 memset(fsp, 0, sizeof(*fsp));
154                 fsp->lp = lport;
155                 fsp->xfer_ddp = FC_XID_UNKNOWN;
156                 atomic_set(&fsp->ref_cnt, 1);
157                 init_timer(&fsp->timer);
158                 INIT_LIST_HEAD(&fsp->list);
159                 spin_lock_init(&fsp->scsi_pkt_lock);
160         }
161         return fsp;
162 }
163
164 /**
165  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
166  * @fsp: The FCP packet to be released
167  *
168  * Context: Can be called from process or interrupt context,
169  *          no lock is required.
170  */
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
172 {
173         if (atomic_dec_and_test(&fsp->ref_cnt)) {
174                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
175
176                 mempool_free(fsp, si->scsi_pkt_pool);
177         }
178 }
179
180 /**
181  * fc_fcp_pkt_hold() - Hold a fcp_pkt
182  * @fsp: The FCP packet to be held
183  */
184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
185 {
186         atomic_inc(&fsp->ref_cnt);
187 }
188
189 /**
190  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
191  * @seq: The sequence that the FCP packet is on (required by destructor API)
192  * @fsp: The FCP packet to be released
193  *
194  * This routine is called by a destructor callback in the exch_seq_send()
195  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
196  * argument even though it is not used by this routine.
197  *
198  * Context: No locking required.
199  */
200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
201 {
202         fc_fcp_pkt_release(fsp);
203 }
204
205 /**
206  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
207  * @fsp: The FCP packet to be locked and incremented
208  *
209  * We should only return error if we return a command to SCSI-ml before
210  * getting a response. This can happen in cases where we send a abort, but
211  * do not wait for the response and the abort and command can be passing
212  * each other on the wire/network-layer.
213  *
214  * Note: this function locks the packet and gets a reference to allow
215  * callers to call the completion function while the lock is held and
216  * not have to worry about the packets refcount.
217  *
218  * TODO: Maybe we should just have callers grab/release the lock and
219  * have a function that they call to verify the fsp and grab a ref if
220  * needed.
221  */
222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
223 {
224         spin_lock_bh(&fsp->scsi_pkt_lock);
225         if (fsp->state & FC_SRB_COMPL) {
226                 spin_unlock_bh(&fsp->scsi_pkt_lock);
227                 return -EPERM;
228         }
229
230         fc_fcp_pkt_hold(fsp);
231         return 0;
232 }
233
234 /**
235  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
236  *                       reference count
237  * @fsp: The FCP packet to be unlocked and decremented
238  */
239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
240 {
241         spin_unlock_bh(&fsp->scsi_pkt_lock);
242         fc_fcp_pkt_release(fsp);
243 }
244
245 /**
246  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
247  * @fsp:   The FCP packet to start a timer for
248  * @delay: The timeout period in jiffies
249  */
250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
251 {
252         if (!(fsp->state & FC_SRB_COMPL))
253                 mod_timer(&fsp->timer, jiffies + delay);
254 }
255
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *                       fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263         if (!fsp->seq_ptr)
264                 return -EINVAL;
265
266         fsp->state |= FC_SRB_ABORT_PENDING;
267         return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
268 }
269
270 /**
271  * fc_fcp_retry_cmd() - Retry a fcp_pkt
272  * @fsp: The FCP packet to be retried
273  *
274  * Sets the status code to be FC_ERROR and then calls
275  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
276  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
277  * The SCSI-ml will retry the command.
278  */
279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
280 {
281         if (fsp->seq_ptr) {
282                 fsp->lp->tt.exch_done(fsp->seq_ptr);
283                 fsp->seq_ptr = NULL;
284         }
285
286         fsp->state &= ~FC_SRB_ABORT_PENDING;
287         fsp->io_status = 0;
288         fsp->status_code = FC_ERROR;
289         fc_fcp_complete_locked(fsp);
290 }
291
292 /**
293  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
294  * @fsp: The FCP packet that will manage the DDP frames
295  * @xid: The XID that will be used for the DDP exchange
296  */
297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
298 {
299         struct fc_lport *lport;
300
301         lport = fsp->lp;
302         if ((fsp->req_flags & FC_SRB_READ) &&
303             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
304                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
305                                         scsi_sg_count(fsp->cmd)))
306                         fsp->xfer_ddp = xid;
307         }
308 }
309
310 /**
311  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
312  *                     DDP related resources for a fcp_pkt
313  * @fsp: The FCP packet that DDP had been used on
314  */
315 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
316 {
317         struct fc_lport *lport;
318
319         if (!fsp)
320                 return;
321
322         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
323                 return;
324
325         lport = fsp->lp;
326         if (lport->tt.ddp_done) {
327                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
328                 fsp->xfer_ddp = FC_XID_UNKNOWN;
329         }
330 }
331
332 /**
333  * fc_fcp_can_queue_ramp_up() - increases can_queue
334  * @lport: lport to ramp up can_queue
335  */
336 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
337 {
338         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
339         unsigned long flags;
340         int can_queue;
341
342         spin_lock_irqsave(lport->host->host_lock, flags);
343
344         if (si->last_can_queue_ramp_up_time &&
345             (time_before(jiffies, si->last_can_queue_ramp_up_time +
346                          FC_CAN_QUEUE_PERIOD)))
347                 goto unlock;
348
349         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350                         FC_CAN_QUEUE_PERIOD))
351                 goto unlock;
352
353         si->last_can_queue_ramp_up_time = jiffies;
354
355         can_queue = lport->host->can_queue << 1;
356         if (can_queue >= si->max_can_queue) {
357                 can_queue = si->max_can_queue;
358                 si->last_can_queue_ramp_down_time = 0;
359         }
360         lport->host->can_queue = can_queue;
361         shost_printk(KERN_ERR, lport->host, "libfc: increased "
362                      "can_queue to %d.\n", can_queue);
363
364 unlock:
365         spin_unlock_irqrestore(lport->host->host_lock, flags);
366 }
367
368 /**
369  * fc_fcp_can_queue_ramp_down() - reduces can_queue
370  * @lport: lport to reduce can_queue
371  *
372  * If we are getting memory allocation failures, then we may
373  * be trying to execute too many commands. We let the running
374  * commands complete or timeout, then try again with a reduced
375  * can_queue. Eventually we will hit the point where we run
376  * on all reserved structs.
377  */
378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
379 {
380         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
381         unsigned long flags;
382         int can_queue;
383
384         spin_lock_irqsave(lport->host->host_lock, flags);
385
386         if (si->last_can_queue_ramp_down_time &&
387             (time_before(jiffies, si->last_can_queue_ramp_down_time +
388                          FC_CAN_QUEUE_PERIOD)))
389                 goto unlock;
390
391         si->last_can_queue_ramp_down_time = jiffies;
392
393         can_queue = lport->host->can_queue;
394         can_queue >>= 1;
395         if (!can_queue)
396                 can_queue = 1;
397         lport->host->can_queue = can_queue;
398         shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
399                      "Reducing can_queue to %d.\n", can_queue);
400
401 unlock:
402         spin_unlock_irqrestore(lport->host->host_lock, flags);
403 }
404
405 /*
406  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
407  * @lport:      fc lport struct
408  * @len:        payload length
409  *
410  * Allocates fc_frame structure and buffer but if fails to allocate
411  * then reduce can_queue.
412  */
413 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
414                                                   size_t len)
415 {
416         struct fc_frame *fp;
417
418         fp = fc_frame_alloc(lport, len);
419         if (likely(fp))
420                 return fp;
421
422         /* error case */
423         fc_fcp_can_queue_ramp_down(lport);
424         return NULL;
425 }
426
427 /**
428  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
429  * @fsp: The FCP packet the data is on
430  * @fp:  The data frame
431  */
432 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
433 {
434         struct scsi_cmnd *sc = fsp->cmd;
435         struct fc_lport *lport = fsp->lp;
436         struct fcoe_dev_stats *stats;
437         struct fc_frame_header *fh;
438         size_t start_offset;
439         size_t offset;
440         u32 crc;
441         u32 copy_len = 0;
442         size_t len;
443         void *buf;
444         struct scatterlist *sg;
445         u32 nents;
446         u8 host_bcode = FC_COMPLETE;
447
448         fh = fc_frame_header_get(fp);
449         offset = ntohl(fh->fh_parm_offset);
450         start_offset = offset;
451         len = fr_len(fp) - sizeof(*fh);
452         buf = fc_frame_payload_get(fp, 0);
453
454         /*
455          * if this I/O is ddped then clear it and initiate recovery since data
456          * frames are expected to be placed directly in that case.
457          *
458          * Indicate error to scsi-ml because something went wrong with the
459          * ddp handling to get us here.
460          */
461         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
462                 fc_fcp_ddp_done(fsp);
463                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
464                 host_bcode = FC_ERROR;
465                 goto err;
466         }
467         if (offset + len > fsp->data_len) {
468                 /* this should never happen */
469                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
470                     fc_frame_crc_check(fp))
471                         goto crc_err;
472                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
473                            "data_len %x\n", len, offset, fsp->data_len);
474
475                 /* Data is corrupted indicate scsi-ml should retry */
476                 host_bcode = FC_DATA_OVRRUN;
477                 goto err;
478         }
479         if (offset != fsp->xfer_len)
480                 fsp->state |= FC_SRB_DISCONTIG;
481
482         sg = scsi_sglist(sc);
483         nents = scsi_sg_count(sc);
484
485         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
486                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
487                                                     &offset, KM_SOFTIRQ0, NULL);
488         } else {
489                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
490                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
491                                                     &offset, KM_SOFTIRQ0, &crc);
492                 buf = fc_frame_payload_get(fp, 0);
493                 if (len % 4)
494                         crc = crc32(crc, buf + len, 4 - (len % 4));
495
496                 if (~crc != le32_to_cpu(fr_crc(fp))) {
497 crc_err:
498                         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
499                         stats->ErrorFrames++;
500                         /* per cpu count, not total count, but OK for limit */
501                         if (stats->InvalidCRCCount++ < 5)
502                                 printk(KERN_WARNING "libfc: CRC error on data "
503                                        "frame for port (%6.6x)\n",
504                                        lport->port_id);
505                         put_cpu();
506                         /*
507                          * Assume the frame is total garbage.
508                          * We may have copied it over the good part
509                          * of the buffer.
510                          * If so, we need to retry the entire operation.
511                          * Otherwise, ignore it.
512                          */
513                         if (fsp->state & FC_SRB_DISCONTIG) {
514                                 host_bcode = FC_CRC_ERROR;
515                                 goto err;
516                         }
517                         return;
518                 }
519         }
520
521         if (fsp->xfer_contig_end == start_offset)
522                 fsp->xfer_contig_end += copy_len;
523         fsp->xfer_len += copy_len;
524
525         /*
526          * In the very rare event that this data arrived after the response
527          * and completes the transfer, call the completion handler.
528          */
529         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
530             fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
531                 fc_fcp_complete_locked(fsp);
532         return;
533 err:
534         fc_fcp_recovery(fsp, host_bcode);
535 }
536
537 /**
538  * fc_fcp_send_data() - Send SCSI data to a target
539  * @fsp:      The FCP packet the data is on
540  * @sp:       The sequence the data is to be sent on
541  * @offset:   The starting offset for this data request
542  * @seq_blen: The burst length for this data request
543  *
544  * Called after receiving a Transfer Ready data descriptor.
545  * If the LLD is capable of sequence offload then send down the
546  * seq_blen amount of data in single frame, otherwise send
547  * multiple frames of the maximum frame payload supported by
548  * the target port.
549  */
550 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
551                             size_t offset, size_t seq_blen)
552 {
553         struct fc_exch *ep;
554         struct scsi_cmnd *sc;
555         struct scatterlist *sg;
556         struct fc_frame *fp = NULL;
557         struct fc_lport *lport = fsp->lp;
558         struct page *page;
559         size_t remaining;
560         size_t t_blen;
561         size_t tlen;
562         size_t sg_bytes;
563         size_t frame_offset, fh_parm_offset;
564         size_t off;
565         int error;
566         void *data = NULL;
567         void *page_addr;
568         int using_sg = lport->sg_supp;
569         u32 f_ctl;
570
571         WARN_ON(seq_blen <= 0);
572         if (unlikely(offset + seq_blen > fsp->data_len)) {
573                 /* this should never happen */
574                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
575                            "offset %zx\n", seq_blen, offset);
576                 fc_fcp_send_abort(fsp);
577                 return 0;
578         } else if (offset != fsp->xfer_len) {
579                 /* Out of Order Data Request - no problem, but unexpected. */
580                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
581                            "seq_blen %zx offset %zx\n", seq_blen, offset);
582         }
583
584         /*
585          * if LLD is capable of seq_offload then set transport
586          * burst length (t_blen) to seq_blen, otherwise set t_blen
587          * to max FC frame payload previously set in fsp->max_payload.
588          */
589         t_blen = fsp->max_payload;
590         if (lport->seq_offload) {
591                 t_blen = min(seq_blen, (size_t)lport->lso_max);
592                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
593                            fsp, seq_blen, lport->lso_max, t_blen);
594         }
595
596         if (t_blen > 512)
597                 t_blen &= ~(512 - 1);   /* round down to block size */
598         sc = fsp->cmd;
599
600         remaining = seq_blen;
601         fh_parm_offset = frame_offset = offset;
602         tlen = 0;
603         seq = lport->tt.seq_start_next(seq);
604         f_ctl = FC_FC_REL_OFF;
605         WARN_ON(!seq);
606
607         sg = scsi_sglist(sc);
608
609         while (remaining > 0 && sg) {
610                 if (offset >= sg->length) {
611                         offset -= sg->length;
612                         sg = sg_next(sg);
613                         continue;
614                 }
615                 if (!fp) {
616                         tlen = min(t_blen, remaining);
617
618                         /*
619                          * TODO.  Temporary workaround.  fc_seq_send() can't
620                          * handle odd lengths in non-linear skbs.
621                          * This will be the final fragment only.
622                          */
623                         if (tlen % 4)
624                                 using_sg = 0;
625                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
626                         if (!fp)
627                                 return -ENOMEM;
628
629                         data = fc_frame_header_get(fp) + 1;
630                         fh_parm_offset = frame_offset;
631                         fr_max_payload(fp) = fsp->max_payload;
632                 }
633
634                 off = offset + sg->offset;
635                 sg_bytes = min(tlen, sg->length - offset);
636                 sg_bytes = min(sg_bytes,
637                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
638                 page = sg_page(sg) + (off >> PAGE_SHIFT);
639                 if (using_sg) {
640                         get_page(page);
641                         skb_fill_page_desc(fp_skb(fp),
642                                            skb_shinfo(fp_skb(fp))->nr_frags,
643                                            page, off & ~PAGE_MASK, sg_bytes);
644                         fp_skb(fp)->data_len += sg_bytes;
645                         fr_len(fp) += sg_bytes;
646                         fp_skb(fp)->truesize += PAGE_SIZE;
647                 } else {
648                         /*
649                          * The scatterlist item may be bigger than PAGE_SIZE,
650                          * but we must not cross pages inside the kmap.
651                          */
652                         page_addr = kmap_atomic(page, KM_SOFTIRQ0);
653                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
654                                sg_bytes);
655                         kunmap_atomic(page_addr, KM_SOFTIRQ0);
656                         data += sg_bytes;
657                 }
658                 offset += sg_bytes;
659                 frame_offset += sg_bytes;
660                 tlen -= sg_bytes;
661                 remaining -= sg_bytes;
662
663                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
664                     (tlen))
665                         continue;
666
667                 /*
668                  * Send sequence with transfer sequence initiative in case
669                  * this is last FCP frame of the sequence.
670                  */
671                 if (remaining == 0)
672                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
673
674                 ep = fc_seq_exch(seq);
675                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
676                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
677
678                 /*
679                  * send fragment using for a sequence.
680                  */
681                 error = lport->tt.seq_send(lport, seq, fp);
682                 if (error) {
683                         WARN_ON(1);             /* send error should be rare */
684                         fc_fcp_retry_cmd(fsp);
685                         return 0;
686                 }
687                 fp = NULL;
688         }
689         fsp->xfer_len += seq_blen;      /* premature count? */
690         return 0;
691 }
692
693 /**
694  * fc_fcp_abts_resp() - Send an ABTS response
695  * @fsp: The FCP packet that is being aborted
696  * @fp:  The response frame
697  */
698 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
699 {
700         int ba_done = 1;
701         struct fc_ba_rjt *brp;
702         struct fc_frame_header *fh;
703
704         fh = fc_frame_header_get(fp);
705         switch (fh->fh_r_ctl) {
706         case FC_RCTL_BA_ACC:
707                 break;
708         case FC_RCTL_BA_RJT:
709                 brp = fc_frame_payload_get(fp, sizeof(*brp));
710                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
711                         break;
712                 /* fall thru */
713         default:
714                 /*
715                  * we will let the command timeout
716                  * and scsi-ml recover in this case,
717                  * therefore cleared the ba_done flag.
718                  */
719                 ba_done = 0;
720         }
721
722         if (ba_done) {
723                 fsp->state |= FC_SRB_ABORTED;
724                 fsp->state &= ~FC_SRB_ABORT_PENDING;
725
726                 if (fsp->wait_for_comp)
727                         complete(&fsp->tm_done);
728                 else
729                         fc_fcp_complete_locked(fsp);
730         }
731 }
732
733 /**
734  * fc_fcp_recv() - Reveive an FCP frame
735  * @seq: The sequence the frame is on
736  * @fp:  The received frame
737  * @arg: The related FCP packet
738  *
739  * Context: Called from Soft IRQ context. Can not be called
740  *          holding the FCP packet list lock.
741  */
742 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
743 {
744         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
745         struct fc_lport *lport = fsp->lp;
746         struct fc_frame_header *fh;
747         struct fcp_txrdy *dd;
748         u8 r_ctl;
749         int rc = 0;
750
751         if (IS_ERR(fp)) {
752                 fc_fcp_error(fsp, fp);
753                 return;
754         }
755
756         fh = fc_frame_header_get(fp);
757         r_ctl = fh->fh_r_ctl;
758
759         if (lport->state != LPORT_ST_READY)
760                 goto out;
761         if (fc_fcp_lock_pkt(fsp))
762                 goto out;
763         fsp->last_pkt_time = jiffies;
764
765         if (fh->fh_type == FC_TYPE_BLS) {
766                 fc_fcp_abts_resp(fsp, fp);
767                 goto unlock;
768         }
769
770         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
771                 goto unlock;
772
773         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
774                 /*
775                  * received XFER RDY from the target
776                  * need to send data to the target
777                  */
778                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
779                 dd = fc_frame_payload_get(fp, sizeof(*dd));
780                 WARN_ON(!dd);
781
782                 rc = fc_fcp_send_data(fsp, seq,
783                                       (size_t) ntohl(dd->ft_data_ro),
784                                       (size_t) ntohl(dd->ft_burst_len));
785                 if (!rc)
786                         seq->rec_data = fsp->xfer_len;
787         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
788                 /*
789                  * received a DATA frame
790                  * next we will copy the data to the system buffer
791                  */
792                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
793                 fc_fcp_recv_data(fsp, fp);
794                 seq->rec_data = fsp->xfer_contig_end;
795         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
796                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
797
798                 fc_fcp_resp(fsp, fp);
799         } else {
800                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
801         }
802 unlock:
803         fc_fcp_unlock_pkt(fsp);
804 out:
805         fc_frame_free(fp);
806 }
807
808 /**
809  * fc_fcp_resp() - Handler for FCP responses
810  * @fsp: The FCP packet the response is for
811  * @fp:  The response frame
812  */
813 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
814 {
815         struct fc_frame_header *fh;
816         struct fcp_resp *fc_rp;
817         struct fcp_resp_ext *rp_ex;
818         struct fcp_resp_rsp_info *fc_rp_info;
819         u32 plen;
820         u32 expected_len;
821         u32 respl = 0;
822         u32 snsl = 0;
823         u8 flags = 0;
824
825         plen = fr_len(fp);
826         fh = (struct fc_frame_header *)fr_hdr(fp);
827         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
828                 goto len_err;
829         plen -= sizeof(*fh);
830         fc_rp = (struct fcp_resp *)(fh + 1);
831         fsp->cdb_status = fc_rp->fr_status;
832         flags = fc_rp->fr_flags;
833         fsp->scsi_comp_flags = flags;
834         expected_len = fsp->data_len;
835
836         /* if ddp, update xfer len */
837         fc_fcp_ddp_done(fsp);
838
839         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
840                 rp_ex = (void *)(fc_rp + 1);
841                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
842                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
843                                 goto len_err;
844                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
845                         if (flags & FCP_RSP_LEN_VAL) {
846                                 respl = ntohl(rp_ex->fr_rsp_len);
847                                 if (respl != sizeof(*fc_rp_info))
848                                         goto len_err;
849                                 if (fsp->wait_for_comp) {
850                                         /* Abuse cdb_status for rsp code */
851                                         fsp->cdb_status = fc_rp_info->rsp_code;
852                                         complete(&fsp->tm_done);
853                                         /*
854                                          * tmfs will not have any scsi cmd so
855                                          * exit here
856                                          */
857                                         return;
858                                 }
859                         }
860                         if (flags & FCP_SNS_LEN_VAL) {
861                                 snsl = ntohl(rp_ex->fr_sns_len);
862                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
863                                         snsl = SCSI_SENSE_BUFFERSIZE;
864                                 memcpy(fsp->cmd->sense_buffer,
865                                        (char *)fc_rp_info + respl, snsl);
866                         }
867                 }
868                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
869                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
870                                 goto len_err;
871                         if (flags & FCP_RESID_UNDER) {
872                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
873                                 /*
874                                  * The cmnd->underflow is the minimum number of
875                                  * bytes that must be transferred for this
876                                  * command.  Provided a sense condition is not
877                                  * present, make sure the actual amount
878                                  * transferred is at least the underflow value
879                                  * or fail.
880                                  */
881                                 if (!(flags & FCP_SNS_LEN_VAL) &&
882                                     (fc_rp->fr_status == 0) &&
883                                     (scsi_bufflen(fsp->cmd) -
884                                      fsp->scsi_resid) < fsp->cmd->underflow)
885                                         goto err;
886                                 expected_len -= fsp->scsi_resid;
887                         } else {
888                                 fsp->status_code = FC_ERROR;
889                         }
890                 }
891         }
892         fsp->state |= FC_SRB_RCV_STATUS;
893
894         /*
895          * Check for missing or extra data frames.
896          */
897         if (unlikely(fsp->xfer_len != expected_len)) {
898                 if (fsp->xfer_len < expected_len) {
899                         /*
900                          * Some data may be queued locally,
901                          * Wait a at least one jiffy to see if it is delivered.
902                          * If this expires without data, we may do SRR.
903                          */
904                         fc_fcp_timer_set(fsp, 2);
905                         return;
906                 }
907                 fsp->status_code = FC_DATA_OVRRUN;
908                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
909                            "len %x, data len %x\n",
910                            fsp->rport->port_id,
911                            fsp->xfer_len, expected_len, fsp->data_len);
912         }
913         fc_fcp_complete_locked(fsp);
914         return;
915
916 len_err:
917         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
918                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
919 err:
920         fsp->status_code = FC_ERROR;
921         fc_fcp_complete_locked(fsp);
922 }
923
924 /**
925  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
926  *                            fcp_pkt lock held
927  * @fsp: The FCP packet to be completed
928  *
929  * This function may sleep if a timer is pending. The packet lock must be
930  * held, and the host lock must not be held.
931  */
932 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
933 {
934         struct fc_lport *lport = fsp->lp;
935         struct fc_seq *seq;
936         struct fc_exch *ep;
937         u32 f_ctl;
938
939         if (fsp->state & FC_SRB_ABORT_PENDING)
940                 return;
941
942         if (fsp->state & FC_SRB_ABORTED) {
943                 if (!fsp->status_code)
944                         fsp->status_code = FC_CMD_ABORTED;
945         } else {
946                 /*
947                  * Test for transport underrun, independent of response
948                  * underrun status.
949                  */
950                 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
951                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
952                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
953                         fsp->status_code = FC_DATA_UNDRUN;
954                         fsp->io_status = 0;
955                 }
956         }
957
958         seq = fsp->seq_ptr;
959         if (seq) {
960                 fsp->seq_ptr = NULL;
961                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
962                         struct fc_frame *conf_frame;
963                         struct fc_seq *csp;
964
965                         csp = lport->tt.seq_start_next(seq);
966                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
967                         if (conf_frame) {
968                                 f_ctl = FC_FC_SEQ_INIT;
969                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
970                                 ep = fc_seq_exch(seq);
971                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
972                                                ep->did, ep->sid,
973                                                FC_TYPE_FCP, f_ctl, 0);
974                                 lport->tt.seq_send(lport, csp, conf_frame);
975                         }
976                 }
977                 lport->tt.exch_done(seq);
978         }
979         /*
980          * Some resets driven by SCSI are not I/Os and do not have
981          * SCSI commands associated with the requests. We should not
982          * call I/O completion if we do not have a SCSI command.
983          */
984         if (fsp->cmd)
985                 fc_io_compl(fsp);
986 }
987
988 /**
989  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
990  * @fsp:   The FCP packet whose exchanges should be canceled
991  * @error: The reason for the cancellation
992  */
993 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
994 {
995         struct fc_lport *lport = fsp->lp;
996
997         if (fsp->seq_ptr) {
998                 lport->tt.exch_done(fsp->seq_ptr);
999                 fsp->seq_ptr = NULL;
1000         }
1001         fsp->status_code = error;
1002 }
1003
1004 /**
1005  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1006  * @lport: The local port whose exchanges should be canceled
1007  * @id:    The target's ID
1008  * @lun:   The LUN
1009  * @error: The reason for cancellation
1010  *
1011  * If lun or id is -1, they are ignored.
1012  */
1013 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1014                                     unsigned int lun, int error)
1015 {
1016         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1017         struct fc_fcp_pkt *fsp;
1018         struct scsi_cmnd *sc_cmd;
1019         unsigned long flags;
1020
1021         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1022 restart:
1023         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1024                 sc_cmd = fsp->cmd;
1025                 if (id != -1 && scmd_id(sc_cmd) != id)
1026                         continue;
1027
1028                 if (lun != -1 && sc_cmd->device->lun != lun)
1029                         continue;
1030
1031                 fc_fcp_pkt_hold(fsp);
1032                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1033
1034                 if (!fc_fcp_lock_pkt(fsp)) {
1035                         fc_fcp_cleanup_cmd(fsp, error);
1036                         fc_io_compl(fsp);
1037                         fc_fcp_unlock_pkt(fsp);
1038                 }
1039
1040                 fc_fcp_pkt_release(fsp);
1041                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1042                 /*
1043                  * while we dropped the lock multiple pkts could
1044                  * have been released, so we have to start over.
1045                  */
1046                 goto restart;
1047         }
1048         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1049 }
1050
1051 /**
1052  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1053  * @lport: The local port whose exchanges are to be aborted
1054  */
1055 static void fc_fcp_abort_io(struct fc_lport *lport)
1056 {
1057         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1058 }
1059
1060 /**
1061  * fc_fcp_pkt_send() - Send a fcp_pkt
1062  * @lport: The local port to send the FCP packet on
1063  * @fsp:   The FCP packet to send
1064  *
1065  * Return:  Zero for success and -1 for failure
1066  * Locks:   Called without locks held
1067  */
1068 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1069 {
1070         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1071         unsigned long flags;
1072         int rc;
1073
1074         fsp->cmd->SCp.ptr = (char *)fsp;
1075         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1076         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1077
1078         int_to_scsilun(fsp->cmd->device->lun,
1079                        (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1080         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1081
1082         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1083         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1084         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1085         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1086         if (unlikely(rc)) {
1087                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1088                 list_del(&fsp->list);
1089                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1090         }
1091
1092         return rc;
1093 }
1094
1095 /**
1096  * get_fsp_rec_tov() - Helper function to get REC_TOV
1097  * @fsp: the FCP packet
1098  *
1099  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1100  */
1101 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1102 {
1103         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1104
1105         return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1106 }
1107
1108 /**
1109  * fc_fcp_cmd_send() - Send a FCP command
1110  * @lport: The local port to send the command on
1111  * @fsp:   The FCP packet the command is on
1112  * @resp:  The handler for the response
1113  */
1114 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1115                            void (*resp)(struct fc_seq *,
1116                                         struct fc_frame *fp,
1117                                         void *arg))
1118 {
1119         struct fc_frame *fp;
1120         struct fc_seq *seq;
1121         struct fc_rport *rport;
1122         struct fc_rport_libfc_priv *rpriv;
1123         const size_t len = sizeof(fsp->cdb_cmd);
1124         int rc = 0;
1125
1126         if (fc_fcp_lock_pkt(fsp))
1127                 return 0;
1128
1129         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1130         if (!fp) {
1131                 rc = -1;
1132                 goto unlock;
1133         }
1134
1135         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1136         fr_fsp(fp) = fsp;
1137         rport = fsp->rport;
1138         fsp->max_payload = rport->maxframe_size;
1139         rpriv = rport->dd_data;
1140
1141         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1142                        rpriv->local_port->port_id, FC_TYPE_FCP,
1143                        FC_FCTL_REQ, 0);
1144
1145         seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1146                                       fsp, 0);
1147         if (!seq) {
1148                 rc = -1;
1149                 goto unlock;
1150         }
1151         fsp->last_pkt_time = jiffies;
1152         fsp->seq_ptr = seq;
1153         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1154
1155         setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1156         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1157                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1158
1159 unlock:
1160         fc_fcp_unlock_pkt(fsp);
1161         return rc;
1162 }
1163
1164 /**
1165  * fc_fcp_error() - Handler for FCP layer errors
1166  * @fsp: The FCP packet the error is on
1167  * @fp:  The frame that has errored
1168  */
1169 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1170 {
1171         int error = PTR_ERR(fp);
1172
1173         if (fc_fcp_lock_pkt(fsp))
1174                 return;
1175
1176         if (error == -FC_EX_CLOSED) {
1177                 fc_fcp_retry_cmd(fsp);
1178                 goto unlock;
1179         }
1180
1181         /*
1182          * clear abort pending, because the lower layer
1183          * decided to force completion.
1184          */
1185         fsp->state &= ~FC_SRB_ABORT_PENDING;
1186         fsp->status_code = FC_CMD_PLOGO;
1187         fc_fcp_complete_locked(fsp);
1188 unlock:
1189         fc_fcp_unlock_pkt(fsp);
1190 }
1191
1192 /**
1193  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1194  * @fsp:   The FCP packet to abort on
1195  *
1196  * Called to send an abort and then wait for abort completion
1197  */
1198 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1199 {
1200         int rc = FAILED;
1201         unsigned long ticks_left;
1202
1203         if (fc_fcp_send_abort(fsp))
1204                 return FAILED;
1205
1206         init_completion(&fsp->tm_done);
1207         fsp->wait_for_comp = 1;
1208
1209         spin_unlock_bh(&fsp->scsi_pkt_lock);
1210         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1211                                                         FC_SCSI_TM_TOV);
1212         spin_lock_bh(&fsp->scsi_pkt_lock);
1213         fsp->wait_for_comp = 0;
1214
1215         if (!ticks_left) {
1216                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1217         } else if (fsp->state & FC_SRB_ABORTED) {
1218                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1219                 rc = SUCCESS;
1220                 fc_fcp_complete_locked(fsp);
1221         }
1222
1223         return rc;
1224 }
1225
1226 /**
1227  * fc_lun_reset_send() - Send LUN reset command
1228  * @data: The FCP packet that identifies the LUN to be reset
1229  */
1230 static void fc_lun_reset_send(unsigned long data)
1231 {
1232         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1233         struct fc_lport *lport = fsp->lp;
1234
1235         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1236                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1237                         return;
1238                 if (fc_fcp_lock_pkt(fsp))
1239                         return;
1240                 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1241                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1242                 fc_fcp_unlock_pkt(fsp);
1243         }
1244 }
1245
1246 /**
1247  * fc_lun_reset() - Send a LUN RESET command to a device
1248  *                  and wait for the reply
1249  * @lport: The local port to sent the command on
1250  * @fsp:   The FCP packet that identifies the LUN to be reset
1251  * @id:    The SCSI command ID
1252  * @lun:   The LUN ID to be reset
1253  */
1254 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1255                         unsigned int id, unsigned int lun)
1256 {
1257         int rc;
1258
1259         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1260         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1261         int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1262
1263         fsp->wait_for_comp = 1;
1264         init_completion(&fsp->tm_done);
1265
1266         fc_lun_reset_send((unsigned long)fsp);
1267
1268         /*
1269          * wait for completion of reset
1270          * after that make sure all commands are terminated
1271          */
1272         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1273
1274         spin_lock_bh(&fsp->scsi_pkt_lock);
1275         fsp->state |= FC_SRB_COMPL;
1276         spin_unlock_bh(&fsp->scsi_pkt_lock);
1277
1278         del_timer_sync(&fsp->timer);
1279
1280         spin_lock_bh(&fsp->scsi_pkt_lock);
1281         if (fsp->seq_ptr) {
1282                 lport->tt.exch_done(fsp->seq_ptr);
1283                 fsp->seq_ptr = NULL;
1284         }
1285         fsp->wait_for_comp = 0;
1286         spin_unlock_bh(&fsp->scsi_pkt_lock);
1287
1288         if (!rc) {
1289                 FC_SCSI_DBG(lport, "lun reset failed\n");
1290                 return FAILED;
1291         }
1292
1293         /* cdb_status holds the tmf's rsp code */
1294         if (fsp->cdb_status != FCP_TMF_CMPL)
1295                 return FAILED;
1296
1297         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1298         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1299         return SUCCESS;
1300 }
1301
1302 /**
1303  * fc_tm_done() - Task Management response handler
1304  * @seq: The sequence that the response is on
1305  * @fp:  The response frame
1306  * @arg: The FCP packet the response is for
1307  */
1308 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1309 {
1310         struct fc_fcp_pkt *fsp = arg;
1311         struct fc_frame_header *fh;
1312
1313         if (IS_ERR(fp)) {
1314                 /*
1315                  * If there is an error just let it timeout or wait
1316                  * for TMF to be aborted if it timedout.
1317                  *
1318                  * scsi-eh will escalate for when either happens.
1319                  */
1320                 return;
1321         }
1322
1323         if (fc_fcp_lock_pkt(fsp))
1324                 goto out;
1325
1326         /*
1327          * raced with eh timeout handler.
1328          */
1329         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1330                 goto out_unlock;
1331
1332         fh = fc_frame_header_get(fp);
1333         if (fh->fh_type != FC_TYPE_BLS)
1334                 fc_fcp_resp(fsp, fp);
1335         fsp->seq_ptr = NULL;
1336         fsp->lp->tt.exch_done(seq);
1337 out_unlock:
1338         fc_fcp_unlock_pkt(fsp);
1339 out:
1340         fc_frame_free(fp);
1341 }
1342
1343 /**
1344  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1345  * @lport: The local port to be cleaned up
1346  */
1347 static void fc_fcp_cleanup(struct fc_lport *lport)
1348 {
1349         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1350 }
1351
1352 /**
1353  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1354  * @data: The FCP packet that has timed out
1355  *
1356  * If REC is supported then just issue it and return. The REC exchange will
1357  * complete or time out and recovery can continue at that point. Otherwise,
1358  * if the response has been received without all the data it has been
1359  * ER_TIMEOUT since the response was received. If the response has not been
1360  * received we see if data was received recently. If it has been then we
1361  * continue waiting, otherwise, we abort the command.
1362  */
1363 static void fc_fcp_timeout(unsigned long data)
1364 {
1365         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1366         struct fc_rport *rport = fsp->rport;
1367         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1368
1369         if (fc_fcp_lock_pkt(fsp))
1370                 return;
1371
1372         if (fsp->cdb_cmd.fc_tm_flags)
1373                 goto unlock;
1374
1375         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1376
1377         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1378                 fc_fcp_rec(fsp);
1379         else if (fsp->state & FC_SRB_RCV_STATUS)
1380                 fc_fcp_complete_locked(fsp);
1381         else
1382                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1383         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1384 unlock:
1385         fc_fcp_unlock_pkt(fsp);
1386 }
1387
1388 /**
1389  * fc_fcp_rec() - Send a REC ELS request
1390  * @fsp: The FCP packet to send the REC request on
1391  */
1392 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1393 {
1394         struct fc_lport *lport;
1395         struct fc_frame *fp;
1396         struct fc_rport *rport;
1397         struct fc_rport_libfc_priv *rpriv;
1398
1399         lport = fsp->lp;
1400         rport = fsp->rport;
1401         rpriv = rport->dd_data;
1402         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1403                 fsp->status_code = FC_HRD_ERROR;
1404                 fsp->io_status = 0;
1405                 fc_fcp_complete_locked(fsp);
1406                 return;
1407         }
1408
1409         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1410         if (!fp)
1411                 goto retry;
1412
1413         fr_seq(fp) = fsp->seq_ptr;
1414         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1415                        rpriv->local_port->port_id, FC_TYPE_ELS,
1416                        FC_FCTL_REQ, 0);
1417         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1418                                  fc_fcp_rec_resp, fsp,
1419                                  2 * lport->r_a_tov)) {
1420                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1421                 return;
1422         }
1423 retry:
1424         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1425                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1426         else
1427                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1428 }
1429
1430 /**
1431  * fc_fcp_rec_resp() - Handler for REC ELS responses
1432  * @seq: The sequence the response is on
1433  * @fp:  The response frame
1434  * @arg: The FCP packet the response is on
1435  *
1436  * If the response is a reject then the scsi layer will handle
1437  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1438  * set the timeout and return. If the I/O was completed then complete the
1439  * exchange and tell the SCSI layer.
1440  */
1441 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1442 {
1443         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1444         struct fc_els_rec_acc *recp;
1445         struct fc_els_ls_rjt *rjt;
1446         u32 e_stat;
1447         u8 opcode;
1448         u32 offset;
1449         enum dma_data_direction data_dir;
1450         enum fc_rctl r_ctl;
1451         struct fc_rport_libfc_priv *rpriv;
1452
1453         if (IS_ERR(fp)) {
1454                 fc_fcp_rec_error(fsp, fp);
1455                 return;
1456         }
1457
1458         if (fc_fcp_lock_pkt(fsp))
1459                 goto out;
1460
1461         fsp->recov_retry = 0;
1462         opcode = fc_frame_payload_op(fp);
1463         if (opcode == ELS_LS_RJT) {
1464                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1465                 switch (rjt->er_reason) {
1466                 default:
1467                         FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1468                                    "reason %d expl %d\n",
1469                                    fsp->rport->port_id, rjt->er_reason,
1470                                    rjt->er_explan);
1471                         /* fall through */
1472                 case ELS_RJT_UNSUP:
1473                         FC_FCP_DBG(fsp, "device does not support REC\n");
1474                         rpriv = fsp->rport->dd_data;
1475                         /*
1476                          * if we do not spport RECs or got some bogus
1477                          * reason then resetup timer so we check for
1478                          * making progress.
1479                          */
1480                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1481                         break;
1482                 case ELS_RJT_LOGIC:
1483                 case ELS_RJT_UNAB:
1484                         /*
1485                          * If no data transfer, the command frame got dropped
1486                          * so we just retry.  If data was transferred, we
1487                          * lost the response but the target has no record,
1488                          * so we abort and retry.
1489                          */
1490                         if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1491                             fsp->xfer_len == 0) {
1492                                 fc_fcp_retry_cmd(fsp);
1493                                 break;
1494                         }
1495                         fc_fcp_recovery(fsp, FC_ERROR);
1496                         break;
1497                 }
1498         } else if (opcode == ELS_LS_ACC) {
1499                 if (fsp->state & FC_SRB_ABORTED)
1500                         goto unlock_out;
1501
1502                 data_dir = fsp->cmd->sc_data_direction;
1503                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1504                 offset = ntohl(recp->reca_fc4value);
1505                 e_stat = ntohl(recp->reca_e_stat);
1506
1507                 if (e_stat & ESB_ST_COMPLETE) {
1508
1509                         /*
1510                          * The exchange is complete.
1511                          *
1512                          * For output, we must've lost the response.
1513                          * For input, all data must've been sent.
1514                          * We lost may have lost the response
1515                          * (and a confirmation was requested) and maybe
1516                          * some data.
1517                          *
1518                          * If all data received, send SRR
1519                          * asking for response.  If partial data received,
1520                          * or gaps, SRR requests data at start of gap.
1521                          * Recovery via SRR relies on in-order-delivery.
1522                          */
1523                         if (data_dir == DMA_TO_DEVICE) {
1524                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1525                         } else if (fsp->xfer_contig_end == offset) {
1526                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1527                         } else {
1528                                 offset = fsp->xfer_contig_end;
1529                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1530                         }
1531                         fc_fcp_srr(fsp, r_ctl, offset);
1532                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1533                         /*
1534                          * The remote port has the initiative, so just
1535                          * keep waiting for it to complete.
1536                          */
1537                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1538                 } else {
1539
1540                         /*
1541                          * The exchange is incomplete, we have seq. initiative.
1542                          * Lost response with requested confirmation,
1543                          * lost confirmation, lost transfer ready or
1544                          * lost write data.
1545                          *
1546                          * For output, if not all data was received, ask
1547                          * for transfer ready to be repeated.
1548                          *
1549                          * If we received or sent all the data, send SRR to
1550                          * request response.
1551                          *
1552                          * If we lost a response, we may have lost some read
1553                          * data as well.
1554                          */
1555                         r_ctl = FC_RCTL_DD_SOL_DATA;
1556                         if (data_dir == DMA_TO_DEVICE) {
1557                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1558                                 if (offset < fsp->data_len)
1559                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1560                         } else if (offset == fsp->xfer_contig_end) {
1561                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1562                         } else if (fsp->xfer_contig_end < offset) {
1563                                 offset = fsp->xfer_contig_end;
1564                         }
1565                         fc_fcp_srr(fsp, r_ctl, offset);
1566                 }
1567         }
1568 unlock_out:
1569         fc_fcp_unlock_pkt(fsp);
1570 out:
1571         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1572         fc_frame_free(fp);
1573 }
1574
1575 /**
1576  * fc_fcp_rec_error() - Handler for REC errors
1577  * @fsp: The FCP packet the error is on
1578  * @fp:  The REC frame
1579  */
1580 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1581 {
1582         int error = PTR_ERR(fp);
1583
1584         if (fc_fcp_lock_pkt(fsp))
1585                 goto out;
1586
1587         switch (error) {
1588         case -FC_EX_CLOSED:
1589                 fc_fcp_retry_cmd(fsp);
1590                 break;
1591
1592         default:
1593                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1594                            fsp, fsp->rport->port_id, error);
1595                 fsp->status_code = FC_CMD_PLOGO;
1596                 /* fall through */
1597
1598         case -FC_EX_TIMEOUT:
1599                 /*
1600                  * Assume REC or LS_ACC was lost.
1601                  * The exchange manager will have aborted REC, so retry.
1602                  */
1603                 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1604                            fsp->rport->port_id, error, fsp->recov_retry,
1605                            FC_MAX_RECOV_RETRY);
1606                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1607                         fc_fcp_rec(fsp);
1608                 else
1609                         fc_fcp_recovery(fsp, FC_ERROR);
1610                 break;
1611         }
1612         fc_fcp_unlock_pkt(fsp);
1613 out:
1614         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1615 }
1616
1617 /**
1618  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1619  * @fsp: The FCP pkt that needs to be aborted
1620  */
1621 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1622 {
1623         fsp->status_code = code;
1624         fsp->cdb_status = 0;
1625         fsp->io_status = 0;
1626         /*
1627          * if this fails then we let the scsi command timer fire and
1628          * scsi-ml escalate.
1629          */
1630         fc_fcp_send_abort(fsp);
1631 }
1632
1633 /**
1634  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1635  * @fsp:   The FCP packet the SRR is to be sent on
1636  * @r_ctl: The R_CTL field for the SRR request
1637  * This is called after receiving status but insufficient data, or
1638  * when expecting status but the request has timed out.
1639  */
1640 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1641 {
1642         struct fc_lport *lport = fsp->lp;
1643         struct fc_rport *rport;
1644         struct fc_rport_libfc_priv *rpriv;
1645         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1646         struct fc_seq *seq;
1647         struct fcp_srr *srr;
1648         struct fc_frame *fp;
1649         u8 cdb_op;
1650         unsigned int rec_tov;
1651
1652         rport = fsp->rport;
1653         rpriv = rport->dd_data;
1654         cdb_op = fsp->cdb_cmd.fc_cdb[0];
1655
1656         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1657             rpriv->rp_state != RPORT_ST_READY)
1658                 goto retry;                     /* shouldn't happen */
1659         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1660         if (!fp)
1661                 goto retry;
1662
1663         srr = fc_frame_payload_get(fp, sizeof(*srr));
1664         memset(srr, 0, sizeof(*srr));
1665         srr->srr_op = ELS_SRR;
1666         srr->srr_ox_id = htons(ep->oxid);
1667         srr->srr_rx_id = htons(ep->rxid);
1668         srr->srr_r_ctl = r_ctl;
1669         srr->srr_rel_off = htonl(offset);
1670
1671         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1672                        rpriv->local_port->port_id, FC_TYPE_FCP,
1673                        FC_FCTL_REQ, 0);
1674
1675         rec_tov = get_fsp_rec_tov(fsp);
1676         seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
1677                                       fsp, jiffies_to_msecs(rec_tov));
1678         if (!seq)
1679                 goto retry;
1680
1681         fsp->recov_seq = seq;
1682         fsp->xfer_len = offset;
1683         fsp->xfer_contig_end = offset;
1684         fsp->state &= ~FC_SRB_RCV_STATUS;
1685         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1686         return;
1687 retry:
1688         fc_fcp_retry_cmd(fsp);
1689 }
1690
1691 /**
1692  * fc_fcp_srr_resp() - Handler for SRR response
1693  * @seq: The sequence the SRR is on
1694  * @fp:  The SRR frame
1695  * @arg: The FCP packet the SRR is on
1696  */
1697 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1698 {
1699         struct fc_fcp_pkt *fsp = arg;
1700         struct fc_frame_header *fh;
1701
1702         if (IS_ERR(fp)) {
1703                 fc_fcp_srr_error(fsp, fp);
1704                 return;
1705         }
1706
1707         if (fc_fcp_lock_pkt(fsp))
1708                 goto out;
1709
1710         fh = fc_frame_header_get(fp);
1711         /*
1712          * BUG? fc_fcp_srr_error calls exch_done which would release
1713          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1714          * then fc_exch_timeout would be sending an abort. The exch_done
1715          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1716          * an abort response though.
1717          */
1718         if (fh->fh_type == FC_TYPE_BLS) {
1719                 fc_fcp_unlock_pkt(fsp);
1720                 return;
1721         }
1722
1723         fsp->recov_seq = NULL;
1724         switch (fc_frame_payload_op(fp)) {
1725         case ELS_LS_ACC:
1726                 fsp->recov_retry = 0;
1727                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1728                 break;
1729         case ELS_LS_RJT:
1730         default:
1731                 fc_fcp_recovery(fsp, FC_ERROR);
1732                 break;
1733         }
1734         fc_fcp_unlock_pkt(fsp);
1735         fsp->lp->tt.exch_done(seq);
1736 out:
1737         fc_frame_free(fp);
1738         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding SRR */
1739 }
1740
1741 /**
1742  * fc_fcp_srr_error() - Handler for SRR errors
1743  * @fsp: The FCP packet that the SRR error is on
1744  * @fp:  The SRR frame
1745  */
1746 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1747 {
1748         if (fc_fcp_lock_pkt(fsp))
1749                 goto out;
1750         fsp->lp->tt.exch_done(fsp->recov_seq);
1751         fsp->recov_seq = NULL;
1752         switch (PTR_ERR(fp)) {
1753         case -FC_EX_TIMEOUT:
1754                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1755                         fc_fcp_rec(fsp);
1756                 else
1757                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1758                 break;
1759         case -FC_EX_CLOSED:                     /* e.g., link failure */
1760                 /* fall through */
1761         default:
1762                 fc_fcp_retry_cmd(fsp);
1763                 break;
1764         }
1765         fc_fcp_unlock_pkt(fsp);
1766 out:
1767         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding SRR */
1768 }
1769
1770 /**
1771  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1772  * @lport: The local port to be checked
1773  */
1774 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1775 {
1776         /* lock ? */
1777         return (lport->state == LPORT_ST_READY) &&
1778                 lport->link_up && !lport->qfull;
1779 }
1780
1781 /**
1782  * fc_queuecommand() - The queuecommand function of the SCSI template
1783  * @shost: The Scsi_Host that the command was issued to
1784  * @cmd:   The scsi_cmnd to be executed
1785  *
1786  * This is the i/o strategy routine, called by the SCSI layer.
1787  */
1788 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1789 {
1790         struct fc_lport *lport = shost_priv(shost);
1791         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1792         struct fc_fcp_pkt *fsp;
1793         struct fc_rport_libfc_priv *rpriv;
1794         int rval;
1795         int rc = 0;
1796         struct fcoe_dev_stats *stats;
1797
1798         rval = fc_remote_port_chkready(rport);
1799         if (rval) {
1800                 sc_cmd->result = rval;
1801                 sc_cmd->scsi_done(sc_cmd);
1802                 return 0;
1803         }
1804
1805         if (!*(struct fc_remote_port **)rport->dd_data) {
1806                 /*
1807                  * rport is transitioning from blocked/deleted to
1808                  * online
1809                  */
1810                 sc_cmd->result = DID_IMM_RETRY << 16;
1811                 sc_cmd->scsi_done(sc_cmd);
1812                 goto out;
1813         }
1814
1815         rpriv = rport->dd_data;
1816
1817         if (!fc_fcp_lport_queue_ready(lport)) {
1818                 if (lport->qfull)
1819                         fc_fcp_can_queue_ramp_down(lport);
1820                 rc = SCSI_MLQUEUE_HOST_BUSY;
1821                 goto out;
1822         }
1823
1824         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1825         if (fsp == NULL) {
1826                 rc = SCSI_MLQUEUE_HOST_BUSY;
1827                 goto out;
1828         }
1829
1830         /*
1831          * build the libfc request pkt
1832          */
1833         fsp->cmd = sc_cmd;      /* save the cmd */
1834         fsp->rport = rport;     /* set the remote port ptr */
1835
1836         /*
1837          * set up the transfer length
1838          */
1839         fsp->data_len = scsi_bufflen(sc_cmd);
1840         fsp->xfer_len = 0;
1841
1842         /*
1843          * setup the data direction
1844          */
1845         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1846         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1847                 fsp->req_flags = FC_SRB_READ;
1848                 stats->InputRequests++;
1849                 stats->InputBytes += fsp->data_len;
1850         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1851                 fsp->req_flags = FC_SRB_WRITE;
1852                 stats->OutputRequests++;
1853                 stats->OutputBytes += fsp->data_len;
1854         } else {
1855                 fsp->req_flags = 0;
1856                 stats->ControlRequests++;
1857         }
1858         put_cpu();
1859
1860         init_timer(&fsp->timer);
1861         fsp->timer.data = (unsigned long)fsp;
1862
1863         /*
1864          * send it to the lower layer
1865          * if we get -1 return then put the request in the pending
1866          * queue.
1867          */
1868         rval = fc_fcp_pkt_send(lport, fsp);
1869         if (rval != 0) {
1870                 fsp->state = FC_SRB_FREE;
1871                 fc_fcp_pkt_release(fsp);
1872                 rc = SCSI_MLQUEUE_HOST_BUSY;
1873         }
1874 out:
1875         return rc;
1876 }
1877 EXPORT_SYMBOL(fc_queuecommand);
1878
1879 /**
1880  * fc_io_compl() - Handle responses for completed commands
1881  * @fsp: The FCP packet that is complete
1882  *
1883  * Translates fcp_pkt errors to a Linux SCSI errors.
1884  * The fcp packet lock must be held when calling.
1885  */
1886 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1887 {
1888         struct fc_fcp_internal *si;
1889         struct scsi_cmnd *sc_cmd;
1890         struct fc_lport *lport;
1891         unsigned long flags;
1892
1893         /* release outstanding ddp context */
1894         fc_fcp_ddp_done(fsp);
1895
1896         fsp->state |= FC_SRB_COMPL;
1897         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1898                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1899                 del_timer_sync(&fsp->timer);
1900                 spin_lock_bh(&fsp->scsi_pkt_lock);
1901         }
1902
1903         lport = fsp->lp;
1904         si = fc_get_scsi_internal(lport);
1905
1906         /*
1907          * if can_queue ramp down is done then try can_queue ramp up
1908          * since commands are completing now.
1909          */
1910         if (si->last_can_queue_ramp_down_time)
1911                 fc_fcp_can_queue_ramp_up(lport);
1912
1913         sc_cmd = fsp->cmd;
1914         CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1915         switch (fsp->status_code) {
1916         case FC_COMPLETE:
1917                 if (fsp->cdb_status == 0) {
1918                         /*
1919                          * good I/O status
1920                          */
1921                         sc_cmd->result = DID_OK << 16;
1922                         if (fsp->scsi_resid)
1923                                 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1924                 } else {
1925                         /*
1926                          * transport level I/O was ok but scsi
1927                          * has non zero status
1928                          */
1929                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1930                 }
1931                 break;
1932         case FC_ERROR:
1933                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1934                            "due to FC_ERROR\n");
1935                 sc_cmd->result = DID_ERROR << 16;
1936                 break;
1937         case FC_DATA_UNDRUN:
1938                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1939                         /*
1940                          * scsi status is good but transport level
1941                          * underrun.
1942                          */
1943                         if (fsp->state & FC_SRB_RCV_STATUS) {
1944                                 sc_cmd->result = DID_OK << 16;
1945                         } else {
1946                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1947                                            " due to FC_DATA_UNDRUN (trans)\n");
1948                                 sc_cmd->result = DID_ERROR << 16;
1949                         }
1950                 } else {
1951                         /*
1952                          * scsi got underrun, this is an error
1953                          */
1954                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1955                                    "due to FC_DATA_UNDRUN (scsi)\n");
1956                         CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1957                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1958                 }
1959                 break;
1960         case FC_DATA_OVRRUN:
1961                 /*
1962                  * overrun is an error
1963                  */
1964                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1965                            "due to FC_DATA_OVRRUN\n");
1966                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1967                 break;
1968         case FC_CMD_ABORTED:
1969                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1970                           "due to FC_CMD_ABORTED\n");
1971                 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1972                 break;
1973         case FC_CMD_RESET:
1974                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1975                            "due to FC_CMD_RESET\n");
1976                 sc_cmd->result = (DID_RESET << 16);
1977                 break;
1978         case FC_HRD_ERROR:
1979                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1980                            "due to FC_HRD_ERROR\n");
1981                 sc_cmd->result = (DID_NO_CONNECT << 16);
1982                 break;
1983         case FC_CRC_ERROR:
1984                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1985                            "due to FC_CRC_ERROR\n");
1986                 sc_cmd->result = (DID_PARITY << 16);
1987                 break;
1988         case FC_TIMED_OUT:
1989                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1990                            "due to FC_TIMED_OUT\n");
1991                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1992                 break;
1993         default:
1994                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1995                            "due to unknown error\n");
1996                 sc_cmd->result = (DID_ERROR << 16);
1997                 break;
1998         }
1999
2000         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2001                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2002
2003         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2004         list_del(&fsp->list);
2005         sc_cmd->SCp.ptr = NULL;
2006         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2007         sc_cmd->scsi_done(sc_cmd);
2008
2009         /* release ref from initial allocation in queue command */
2010         fc_fcp_pkt_release(fsp);
2011 }
2012
2013 /**
2014  * fc_eh_abort() - Abort a command
2015  * @sc_cmd: The SCSI command to abort
2016  *
2017  * From SCSI host template.
2018  * Send an ABTS to the target device and wait for the response.
2019  */
2020 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2021 {
2022         struct fc_fcp_pkt *fsp;
2023         struct fc_lport *lport;
2024         struct fc_fcp_internal *si;
2025         int rc = FAILED;
2026         unsigned long flags;
2027
2028         lport = shost_priv(sc_cmd->device->host);
2029         if (lport->state != LPORT_ST_READY)
2030                 return rc;
2031         else if (!lport->link_up)
2032                 return rc;
2033
2034         si = fc_get_scsi_internal(lport);
2035         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2036         fsp = CMD_SP(sc_cmd);
2037         if (!fsp) {
2038                 /* command completed while scsi eh was setting up */
2039                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2040                 return SUCCESS;
2041         }
2042         /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2043         fc_fcp_pkt_hold(fsp);
2044         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2045
2046         if (fc_fcp_lock_pkt(fsp)) {
2047                 /* completed while we were waiting for timer to be deleted */
2048                 rc = SUCCESS;
2049                 goto release_pkt;
2050         }
2051
2052         rc = fc_fcp_pkt_abort(fsp);
2053         fc_fcp_unlock_pkt(fsp);
2054
2055 release_pkt:
2056         fc_fcp_pkt_release(fsp);
2057         return rc;
2058 }
2059 EXPORT_SYMBOL(fc_eh_abort);
2060
2061 /**
2062  * fc_eh_device_reset() - Reset a single LUN
2063  * @sc_cmd: The SCSI command which identifies the device whose
2064  *          LUN is to be reset
2065  *
2066  * Set from SCSI host template.
2067  */
2068 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2069 {
2070         struct fc_lport *lport;
2071         struct fc_fcp_pkt *fsp;
2072         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2073         int rc = FAILED;
2074         int rval;
2075
2076         rval = fc_remote_port_chkready(rport);
2077         if (rval)
2078                 goto out;
2079
2080         lport = shost_priv(sc_cmd->device->host);
2081
2082         if (lport->state != LPORT_ST_READY)
2083                 return rc;
2084
2085         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2086
2087         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2088         if (fsp == NULL) {
2089                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2090                 goto out;
2091         }
2092
2093         /*
2094          * Build the libfc request pkt. Do not set the scsi cmnd, because
2095          * the sc passed in is not setup for execution like when sent
2096          * through the queuecommand callout.
2097          */
2098         fsp->rport = rport;     /* set the remote port ptr */
2099
2100         /*
2101          * flush outstanding commands
2102          */
2103         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2104         fsp->state = FC_SRB_FREE;
2105         fc_fcp_pkt_release(fsp);
2106
2107 out:
2108         return rc;
2109 }
2110 EXPORT_SYMBOL(fc_eh_device_reset);
2111
2112 /**
2113  * fc_eh_host_reset() - Reset a Scsi_Host.
2114  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2115  */
2116 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2117 {
2118         struct Scsi_Host *shost = sc_cmd->device->host;
2119         struct fc_lport *lport = shost_priv(shost);
2120         unsigned long wait_tmo;
2121
2122         FC_SCSI_DBG(lport, "Resetting host\n");
2123
2124         lport->tt.lport_reset(lport);
2125         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2126         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2127                                                                wait_tmo))
2128                 msleep(1000);
2129
2130         if (fc_fcp_lport_queue_ready(lport)) {
2131                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2132                              "on port (%6.6x)\n", lport->port_id);
2133                 return SUCCESS;
2134         } else {
2135                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2136                              "port (%6.6x) is not ready.\n",
2137                              lport->port_id);
2138                 return FAILED;
2139         }
2140 }
2141 EXPORT_SYMBOL(fc_eh_host_reset);
2142
2143 /**
2144  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2145  * @sdev: The SCSI device that identifies the SCSI host
2146  *
2147  * Configures queue depth based on host's cmd_per_len. If not set
2148  * then we use the libfc default.
2149  */
2150 int fc_slave_alloc(struct scsi_device *sdev)
2151 {
2152         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2153
2154         if (!rport || fc_remote_port_chkready(rport))
2155                 return -ENXIO;
2156
2157         if (sdev->tagged_supported)
2158                 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2159         else
2160                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2161                                         FC_FCP_DFLT_QUEUE_DEPTH);
2162
2163         return 0;
2164 }
2165 EXPORT_SYMBOL(fc_slave_alloc);
2166
2167 /**
2168  * fc_change_queue_depth() - Change a device's queue depth
2169  * @sdev:   The SCSI device whose queue depth is to change
2170  * @qdepth: The new queue depth
2171  * @reason: The resason for the change
2172  */
2173 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2174 {
2175         switch (reason) {
2176         case SCSI_QDEPTH_DEFAULT:
2177                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2178                 break;
2179         case SCSI_QDEPTH_QFULL:
2180                 scsi_track_queue_full(sdev, qdepth);
2181                 break;
2182         case SCSI_QDEPTH_RAMP_UP:
2183                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2184                 break;
2185         default:
2186                 return -EOPNOTSUPP;
2187         }
2188         return sdev->queue_depth;
2189 }
2190 EXPORT_SYMBOL(fc_change_queue_depth);
2191
2192 /**
2193  * fc_change_queue_type() - Change a device's queue type
2194  * @sdev:     The SCSI device whose queue depth is to change
2195  * @tag_type: Identifier for queue type
2196  */
2197 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2198 {
2199         if (sdev->tagged_supported) {
2200                 scsi_set_tag_type(sdev, tag_type);
2201                 if (tag_type)
2202                         scsi_activate_tcq(sdev, sdev->queue_depth);
2203                 else
2204                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
2205         } else
2206                 tag_type = 0;
2207
2208         return tag_type;
2209 }
2210 EXPORT_SYMBOL(fc_change_queue_type);
2211
2212 /**
2213  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2214  * @lport: The local port that no longer needs the FCP layer
2215  */
2216 void fc_fcp_destroy(struct fc_lport *lport)
2217 {
2218         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2219
2220         if (!list_empty(&si->scsi_pkt_queue))
2221                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2222                        "port (%6.6x)\n", lport->port_id);
2223
2224         mempool_destroy(si->scsi_pkt_pool);
2225         kfree(si);
2226         lport->scsi_priv = NULL;
2227 }
2228 EXPORT_SYMBOL(fc_fcp_destroy);
2229
2230 int fc_setup_fcp(void)
2231 {
2232         int rc = 0;
2233
2234         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2235                                             sizeof(struct fc_fcp_pkt),
2236                                             0, SLAB_HWCACHE_ALIGN, NULL);
2237         if (!scsi_pkt_cachep) {
2238                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2239                        "module load failed!");
2240                 rc = -ENOMEM;
2241         }
2242
2243         return rc;
2244 }
2245
2246 void fc_destroy_fcp(void)
2247 {
2248         if (scsi_pkt_cachep)
2249                 kmem_cache_destroy(scsi_pkt_cachep);
2250 }
2251
2252 /**
2253  * fc_fcp_init() - Initialize the FCP layer for a local port
2254  * @lport: The local port to initialize the exchange layer for
2255  */
2256 int fc_fcp_init(struct fc_lport *lport)
2257 {
2258         int rc;
2259         struct fc_fcp_internal *si;
2260
2261         if (!lport->tt.fcp_cmd_send)
2262                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2263
2264         if (!lport->tt.fcp_cleanup)
2265                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2266
2267         if (!lport->tt.fcp_abort_io)
2268                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2269
2270         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2271         if (!si)
2272                 return -ENOMEM;
2273         lport->scsi_priv = si;
2274         si->max_can_queue = lport->host->can_queue;
2275         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2276         spin_lock_init(&si->scsi_queue_lock);
2277
2278         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2279         if (!si->scsi_pkt_pool) {
2280                 rc = -ENOMEM;
2281                 goto free_internal;
2282         }
2283         return 0;
2284
2285 free_internal:
2286         kfree(si);
2287         return rc;
2288 }
2289 EXPORT_SYMBOL(fc_fcp_init);