[SCSI] libfc: cleanup sending SRR request
[linux-2.6-microblaze.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 static struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE             0               /* cmd is free */
49 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
51 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
52 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
53 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
54 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
56
57 #define FC_SRB_READ             (1 << 1)
58 #define FC_SRB_WRITE            (1 << 0)
59
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
68
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79         mempool_t               *scsi_pkt_pool;
80         spinlock_t              scsi_queue_lock;
81         struct list_head        scsi_pkt_queue;
82         unsigned long           last_can_queue_ramp_down_time;
83         unsigned long           last_can_queue_ramp_up_time;
84         int                     max_can_queue;
85 };
86
87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
88
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE             0
114 #define FC_CMD_ABORTED          1
115 #define FC_CMD_RESET            2
116 #define FC_CMD_PLOGO            3
117 #define FC_SNS_RCV              4
118 #define FC_TRANS_ERR            5
119 #define FC_DATA_OVRRUN          6
120 #define FC_DATA_UNDRUN          7
121 #define FC_ERROR                8
122 #define FC_HRD_ERROR            9
123 #define FC_CRC_ERROR            10
124 #define FC_TIMED_OUT            11
125
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV          (10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
132
133 #define FC_MAX_ERROR_CNT        5
134 #define FC_MAX_RECOV_RETRY      3
135
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:      Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149         struct fc_fcp_pkt *fsp;
150
151         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152         if (fsp) {
153                 memset(fsp, 0, sizeof(*fsp));
154                 fsp->lp = lport;
155                 fsp->xfer_ddp = FC_XID_UNKNOWN;
156                 atomic_set(&fsp->ref_cnt, 1);
157                 init_timer(&fsp->timer);
158                 INIT_LIST_HEAD(&fsp->list);
159                 spin_lock_init(&fsp->scsi_pkt_lock);
160         }
161         return fsp;
162 }
163
164 /**
165  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
166  * @fsp: The FCP packet to be released
167  *
168  * Context: Can be called from process or interrupt context,
169  *          no lock is required.
170  */
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
172 {
173         if (atomic_dec_and_test(&fsp->ref_cnt)) {
174                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
175
176                 mempool_free(fsp, si->scsi_pkt_pool);
177         }
178 }
179
180 /**
181  * fc_fcp_pkt_hold() - Hold a fcp_pkt
182  * @fsp: The FCP packet to be held
183  */
184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
185 {
186         atomic_inc(&fsp->ref_cnt);
187 }
188
189 /**
190  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
191  * @seq: The sequence that the FCP packet is on (required by destructor API)
192  * @fsp: The FCP packet to be released
193  *
194  * This routine is called by a destructor callback in the exch_seq_send()
195  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
196  * argument even though it is not used by this routine.
197  *
198  * Context: No locking required.
199  */
200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
201 {
202         fc_fcp_pkt_release(fsp);
203 }
204
205 /**
206  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
207  * @fsp: The FCP packet to be locked and incremented
208  *
209  * We should only return error if we return a command to SCSI-ml before
210  * getting a response. This can happen in cases where we send a abort, but
211  * do not wait for the response and the abort and command can be passing
212  * each other on the wire/network-layer.
213  *
214  * Note: this function locks the packet and gets a reference to allow
215  * callers to call the completion function while the lock is held and
216  * not have to worry about the packets refcount.
217  *
218  * TODO: Maybe we should just have callers grab/release the lock and
219  * have a function that they call to verify the fsp and grab a ref if
220  * needed.
221  */
222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
223 {
224         spin_lock_bh(&fsp->scsi_pkt_lock);
225         if (fsp->state & FC_SRB_COMPL) {
226                 spin_unlock_bh(&fsp->scsi_pkt_lock);
227                 return -EPERM;
228         }
229
230         fc_fcp_pkt_hold(fsp);
231         return 0;
232 }
233
234 /**
235  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
236  *                       reference count
237  * @fsp: The FCP packet to be unlocked and decremented
238  */
239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
240 {
241         spin_unlock_bh(&fsp->scsi_pkt_lock);
242         fc_fcp_pkt_release(fsp);
243 }
244
245 /**
246  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
247  * @fsp:   The FCP packet to start a timer for
248  * @delay: The timeout period in jiffies
249  */
250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
251 {
252         if (!(fsp->state & FC_SRB_COMPL))
253                 mod_timer(&fsp->timer, jiffies + delay);
254 }
255
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *                       fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263         if (!fsp->seq_ptr)
264                 return -EINVAL;
265
266         fsp->state |= FC_SRB_ABORT_PENDING;
267         return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
268 }
269
270 /**
271  * fc_fcp_retry_cmd() - Retry a fcp_pkt
272  * @fsp: The FCP packet to be retried
273  *
274  * Sets the status code to be FC_ERROR and then calls
275  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
276  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
277  * The SCSI-ml will retry the command.
278  */
279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
280 {
281         if (fsp->seq_ptr) {
282                 fsp->lp->tt.exch_done(fsp->seq_ptr);
283                 fsp->seq_ptr = NULL;
284         }
285
286         fsp->state &= ~FC_SRB_ABORT_PENDING;
287         fsp->io_status = 0;
288         fsp->status_code = FC_ERROR;
289         fc_fcp_complete_locked(fsp);
290 }
291
292 /**
293  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
294  * @fsp: The FCP packet that will manage the DDP frames
295  * @xid: The XID that will be used for the DDP exchange
296  */
297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
298 {
299         struct fc_lport *lport;
300
301         lport = fsp->lp;
302         if ((fsp->req_flags & FC_SRB_READ) &&
303             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
304                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
305                                         scsi_sg_count(fsp->cmd)))
306                         fsp->xfer_ddp = xid;
307         }
308 }
309
310 /**
311  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
312  *                     DDP related resources for a fcp_pkt
313  * @fsp: The FCP packet that DDP had been used on
314  */
315 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
316 {
317         struct fc_lport *lport;
318
319         if (!fsp)
320                 return;
321
322         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
323                 return;
324
325         lport = fsp->lp;
326         if (lport->tt.ddp_done) {
327                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
328                 fsp->xfer_ddp = FC_XID_UNKNOWN;
329         }
330 }
331
332 /**
333  * fc_fcp_can_queue_ramp_up() - increases can_queue
334  * @lport: lport to ramp up can_queue
335  */
336 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
337 {
338         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
339         unsigned long flags;
340         int can_queue;
341
342         spin_lock_irqsave(lport->host->host_lock, flags);
343
344         if (si->last_can_queue_ramp_up_time &&
345             (time_before(jiffies, si->last_can_queue_ramp_up_time +
346                          FC_CAN_QUEUE_PERIOD)))
347                 goto unlock;
348
349         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350                         FC_CAN_QUEUE_PERIOD))
351                 goto unlock;
352
353         si->last_can_queue_ramp_up_time = jiffies;
354
355         can_queue = lport->host->can_queue << 1;
356         if (can_queue >= si->max_can_queue) {
357                 can_queue = si->max_can_queue;
358                 si->last_can_queue_ramp_down_time = 0;
359         }
360         lport->host->can_queue = can_queue;
361         shost_printk(KERN_ERR, lport->host, "libfc: increased "
362                      "can_queue to %d.\n", can_queue);
363
364 unlock:
365         spin_unlock_irqrestore(lport->host->host_lock, flags);
366 }
367
368 /**
369  * fc_fcp_can_queue_ramp_down() - reduces can_queue
370  * @lport: lport to reduce can_queue
371  *
372  * If we are getting memory allocation failures, then we may
373  * be trying to execute too many commands. We let the running
374  * commands complete or timeout, then try again with a reduced
375  * can_queue. Eventually we will hit the point where we run
376  * on all reserved structs.
377  */
378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
379 {
380         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
381         unsigned long flags;
382         int can_queue;
383
384         spin_lock_irqsave(lport->host->host_lock, flags);
385
386         if (si->last_can_queue_ramp_down_time &&
387             (time_before(jiffies, si->last_can_queue_ramp_down_time +
388                          FC_CAN_QUEUE_PERIOD)))
389                 goto unlock;
390
391         si->last_can_queue_ramp_down_time = jiffies;
392
393         can_queue = lport->host->can_queue;
394         can_queue >>= 1;
395         if (!can_queue)
396                 can_queue = 1;
397         lport->host->can_queue = can_queue;
398         shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
399                      "Reducing can_queue to %d.\n", can_queue);
400
401 unlock:
402         spin_unlock_irqrestore(lport->host->host_lock, flags);
403 }
404
405 /*
406  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
407  * @lport:      fc lport struct
408  * @len:        payload length
409  *
410  * Allocates fc_frame structure and buffer but if fails to allocate
411  * then reduce can_queue.
412  */
413 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
414                                                   size_t len)
415 {
416         struct fc_frame *fp;
417
418         fp = fc_frame_alloc(lport, len);
419         if (likely(fp))
420                 return fp;
421
422         /* error case */
423         fc_fcp_can_queue_ramp_down(lport);
424         return NULL;
425 }
426
427 /**
428  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
429  * @fsp: The FCP packet the data is on
430  * @fp:  The data frame
431  */
432 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
433 {
434         struct scsi_cmnd *sc = fsp->cmd;
435         struct fc_lport *lport = fsp->lp;
436         struct fcoe_dev_stats *stats;
437         struct fc_frame_header *fh;
438         size_t start_offset;
439         size_t offset;
440         u32 crc;
441         u32 copy_len = 0;
442         size_t len;
443         void *buf;
444         struct scatterlist *sg;
445         u32 nents;
446         u8 host_bcode = FC_COMPLETE;
447
448         fh = fc_frame_header_get(fp);
449         offset = ntohl(fh->fh_parm_offset);
450         start_offset = offset;
451         len = fr_len(fp) - sizeof(*fh);
452         buf = fc_frame_payload_get(fp, 0);
453
454         /*
455          * if this I/O is ddped then clear it and initiate recovery since data
456          * frames are expected to be placed directly in that case.
457          *
458          * Indicate error to scsi-ml because something went wrong with the
459          * ddp handling to get us here.
460          */
461         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
462                 fc_fcp_ddp_done(fsp);
463                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
464                 host_bcode = FC_ERROR;
465                 goto err;
466         }
467         if (offset + len > fsp->data_len) {
468                 /* this should never happen */
469                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
470                     fc_frame_crc_check(fp))
471                         goto crc_err;
472                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
473                            "data_len %x\n", len, offset, fsp->data_len);
474
475                 /* Data is corrupted indicate scsi-ml should retry */
476                 host_bcode = FC_DATA_OVRRUN;
477                 goto err;
478         }
479         if (offset != fsp->xfer_len)
480                 fsp->state |= FC_SRB_DISCONTIG;
481
482         sg = scsi_sglist(sc);
483         nents = scsi_sg_count(sc);
484
485         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
486                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
487                                                     &offset, KM_SOFTIRQ0, NULL);
488         } else {
489                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
490                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
491                                                     &offset, KM_SOFTIRQ0, &crc);
492                 buf = fc_frame_payload_get(fp, 0);
493                 if (len % 4)
494                         crc = crc32(crc, buf + len, 4 - (len % 4));
495
496                 if (~crc != le32_to_cpu(fr_crc(fp))) {
497 crc_err:
498                         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
499                         stats->ErrorFrames++;
500                         /* per cpu count, not total count, but OK for limit */
501                         if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
502                                 printk(KERN_WARNING "libfc: CRC error on data "
503                                        "frame for port (%6.6x)\n",
504                                        lport->port_id);
505                         put_cpu();
506                         /*
507                          * Assume the frame is total garbage.
508                          * We may have copied it over the good part
509                          * of the buffer.
510                          * If so, we need to retry the entire operation.
511                          * Otherwise, ignore it.
512                          */
513                         if (fsp->state & FC_SRB_DISCONTIG) {
514                                 host_bcode = FC_CRC_ERROR;
515                                 goto err;
516                         }
517                         return;
518                 }
519         }
520
521         if (fsp->xfer_contig_end == start_offset)
522                 fsp->xfer_contig_end += copy_len;
523         fsp->xfer_len += copy_len;
524
525         /*
526          * In the very rare event that this data arrived after the response
527          * and completes the transfer, call the completion handler.
528          */
529         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
530             fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
531                 fc_fcp_complete_locked(fsp);
532         return;
533 err:
534         fc_fcp_recovery(fsp, host_bcode);
535 }
536
537 /**
538  * fc_fcp_send_data() - Send SCSI data to a target
539  * @fsp:      The FCP packet the data is on
540  * @sp:       The sequence the data is to be sent on
541  * @offset:   The starting offset for this data request
542  * @seq_blen: The burst length for this data request
543  *
544  * Called after receiving a Transfer Ready data descriptor.
545  * If the LLD is capable of sequence offload then send down the
546  * seq_blen amount of data in single frame, otherwise send
547  * multiple frames of the maximum frame payload supported by
548  * the target port.
549  */
550 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
551                             size_t offset, size_t seq_blen)
552 {
553         struct fc_exch *ep;
554         struct scsi_cmnd *sc;
555         struct scatterlist *sg;
556         struct fc_frame *fp = NULL;
557         struct fc_lport *lport = fsp->lp;
558         struct page *page;
559         size_t remaining;
560         size_t t_blen;
561         size_t tlen;
562         size_t sg_bytes;
563         size_t frame_offset, fh_parm_offset;
564         size_t off;
565         int error;
566         void *data = NULL;
567         void *page_addr;
568         int using_sg = lport->sg_supp;
569         u32 f_ctl;
570
571         WARN_ON(seq_blen <= 0);
572         if (unlikely(offset + seq_blen > fsp->data_len)) {
573                 /* this should never happen */
574                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
575                            "offset %zx\n", seq_blen, offset);
576                 fc_fcp_send_abort(fsp);
577                 return 0;
578         } else if (offset != fsp->xfer_len) {
579                 /* Out of Order Data Request - no problem, but unexpected. */
580                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
581                            "seq_blen %zx offset %zx\n", seq_blen, offset);
582         }
583
584         /*
585          * if LLD is capable of seq_offload then set transport
586          * burst length (t_blen) to seq_blen, otherwise set t_blen
587          * to max FC frame payload previously set in fsp->max_payload.
588          */
589         t_blen = fsp->max_payload;
590         if (lport->seq_offload) {
591                 t_blen = min(seq_blen, (size_t)lport->lso_max);
592                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
593                            fsp, seq_blen, lport->lso_max, t_blen);
594         }
595
596         if (t_blen > 512)
597                 t_blen &= ~(512 - 1);   /* round down to block size */
598         sc = fsp->cmd;
599
600         remaining = seq_blen;
601         fh_parm_offset = frame_offset = offset;
602         tlen = 0;
603         seq = lport->tt.seq_start_next(seq);
604         f_ctl = FC_FC_REL_OFF;
605         WARN_ON(!seq);
606
607         sg = scsi_sglist(sc);
608
609         while (remaining > 0 && sg) {
610                 if (offset >= sg->length) {
611                         offset -= sg->length;
612                         sg = sg_next(sg);
613                         continue;
614                 }
615                 if (!fp) {
616                         tlen = min(t_blen, remaining);
617
618                         /*
619                          * TODO.  Temporary workaround.  fc_seq_send() can't
620                          * handle odd lengths in non-linear skbs.
621                          * This will be the final fragment only.
622                          */
623                         if (tlen % 4)
624                                 using_sg = 0;
625                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
626                         if (!fp)
627                                 return -ENOMEM;
628
629                         data = fc_frame_header_get(fp) + 1;
630                         fh_parm_offset = frame_offset;
631                         fr_max_payload(fp) = fsp->max_payload;
632                 }
633
634                 off = offset + sg->offset;
635                 sg_bytes = min(tlen, sg->length - offset);
636                 sg_bytes = min(sg_bytes,
637                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
638                 page = sg_page(sg) + (off >> PAGE_SHIFT);
639                 if (using_sg) {
640                         get_page(page);
641                         skb_fill_page_desc(fp_skb(fp),
642                                            skb_shinfo(fp_skb(fp))->nr_frags,
643                                            page, off & ~PAGE_MASK, sg_bytes);
644                         fp_skb(fp)->data_len += sg_bytes;
645                         fr_len(fp) += sg_bytes;
646                         fp_skb(fp)->truesize += PAGE_SIZE;
647                 } else {
648                         /*
649                          * The scatterlist item may be bigger than PAGE_SIZE,
650                          * but we must not cross pages inside the kmap.
651                          */
652                         page_addr = kmap_atomic(page, KM_SOFTIRQ0);
653                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
654                                sg_bytes);
655                         kunmap_atomic(page_addr, KM_SOFTIRQ0);
656                         data += sg_bytes;
657                 }
658                 offset += sg_bytes;
659                 frame_offset += sg_bytes;
660                 tlen -= sg_bytes;
661                 remaining -= sg_bytes;
662
663                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
664                     (tlen))
665                         continue;
666
667                 /*
668                  * Send sequence with transfer sequence initiative in case
669                  * this is last FCP frame of the sequence.
670                  */
671                 if (remaining == 0)
672                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
673
674                 ep = fc_seq_exch(seq);
675                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
676                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
677
678                 /*
679                  * send fragment using for a sequence.
680                  */
681                 error = lport->tt.seq_send(lport, seq, fp);
682                 if (error) {
683                         WARN_ON(1);             /* send error should be rare */
684                         return error;
685                 }
686                 fp = NULL;
687         }
688         fsp->xfer_len += seq_blen;      /* premature count? */
689         return 0;
690 }
691
692 /**
693  * fc_fcp_abts_resp() - Receive an ABTS response
694  * @fsp: The FCP packet that is being aborted
695  * @fp:  The response frame
696  */
697 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
698 {
699         int ba_done = 1;
700         struct fc_ba_rjt *brp;
701         struct fc_frame_header *fh;
702
703         fh = fc_frame_header_get(fp);
704         switch (fh->fh_r_ctl) {
705         case FC_RCTL_BA_ACC:
706                 break;
707         case FC_RCTL_BA_RJT:
708                 brp = fc_frame_payload_get(fp, sizeof(*brp));
709                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
710                         break;
711                 /* fall thru */
712         default:
713                 /*
714                  * we will let the command timeout
715                  * and scsi-ml recover in this case,
716                  * therefore cleared the ba_done flag.
717                  */
718                 ba_done = 0;
719         }
720
721         if (ba_done) {
722                 fsp->state |= FC_SRB_ABORTED;
723                 fsp->state &= ~FC_SRB_ABORT_PENDING;
724
725                 if (fsp->wait_for_comp)
726                         complete(&fsp->tm_done);
727                 else
728                         fc_fcp_complete_locked(fsp);
729         }
730 }
731
732 /**
733  * fc_fcp_recv() - Receive an FCP frame
734  * @seq: The sequence the frame is on
735  * @fp:  The received frame
736  * @arg: The related FCP packet
737  *
738  * Context: Called from Soft IRQ context. Can not be called
739  *          holding the FCP packet list lock.
740  */
741 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
742 {
743         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
744         struct fc_lport *lport = fsp->lp;
745         struct fc_frame_header *fh;
746         struct fcp_txrdy *dd;
747         u8 r_ctl;
748         int rc = 0;
749
750         if (IS_ERR(fp)) {
751                 fc_fcp_error(fsp, fp);
752                 return;
753         }
754
755         fh = fc_frame_header_get(fp);
756         r_ctl = fh->fh_r_ctl;
757
758         if (lport->state != LPORT_ST_READY)
759                 goto out;
760         if (fc_fcp_lock_pkt(fsp))
761                 goto out;
762         fsp->last_pkt_time = jiffies;
763
764         if (fh->fh_type == FC_TYPE_BLS) {
765                 fc_fcp_abts_resp(fsp, fp);
766                 goto unlock;
767         }
768
769         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
770                 goto unlock;
771
772         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
773                 /*
774                  * received XFER RDY from the target
775                  * need to send data to the target
776                  */
777                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
778                 dd = fc_frame_payload_get(fp, sizeof(*dd));
779                 WARN_ON(!dd);
780
781                 rc = fc_fcp_send_data(fsp, seq,
782                                       (size_t) ntohl(dd->ft_data_ro),
783                                       (size_t) ntohl(dd->ft_burst_len));
784                 if (!rc)
785                         seq->rec_data = fsp->xfer_len;
786         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
787                 /*
788                  * received a DATA frame
789                  * next we will copy the data to the system buffer
790                  */
791                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
792                 fc_fcp_recv_data(fsp, fp);
793                 seq->rec_data = fsp->xfer_contig_end;
794         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
795                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
796
797                 fc_fcp_resp(fsp, fp);
798         } else {
799                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
800         }
801 unlock:
802         fc_fcp_unlock_pkt(fsp);
803 out:
804         fc_frame_free(fp);
805 }
806
807 /**
808  * fc_fcp_resp() - Handler for FCP responses
809  * @fsp: The FCP packet the response is for
810  * @fp:  The response frame
811  */
812 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
813 {
814         struct fc_frame_header *fh;
815         struct fcp_resp *fc_rp;
816         struct fcp_resp_ext *rp_ex;
817         struct fcp_resp_rsp_info *fc_rp_info;
818         u32 plen;
819         u32 expected_len;
820         u32 respl = 0;
821         u32 snsl = 0;
822         u8 flags = 0;
823
824         plen = fr_len(fp);
825         fh = (struct fc_frame_header *)fr_hdr(fp);
826         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
827                 goto len_err;
828         plen -= sizeof(*fh);
829         fc_rp = (struct fcp_resp *)(fh + 1);
830         fsp->cdb_status = fc_rp->fr_status;
831         flags = fc_rp->fr_flags;
832         fsp->scsi_comp_flags = flags;
833         expected_len = fsp->data_len;
834
835         /* if ddp, update xfer len */
836         fc_fcp_ddp_done(fsp);
837
838         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
839                 rp_ex = (void *)(fc_rp + 1);
840                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
841                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
842                                 goto len_err;
843                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
844                         if (flags & FCP_RSP_LEN_VAL) {
845                                 respl = ntohl(rp_ex->fr_rsp_len);
846                                 if (respl != sizeof(*fc_rp_info))
847                                         goto len_err;
848                                 if (fsp->wait_for_comp) {
849                                         /* Abuse cdb_status for rsp code */
850                                         fsp->cdb_status = fc_rp_info->rsp_code;
851                                         complete(&fsp->tm_done);
852                                         /*
853                                          * tmfs will not have any scsi cmd so
854                                          * exit here
855                                          */
856                                         return;
857                                 }
858                         }
859                         if (flags & FCP_SNS_LEN_VAL) {
860                                 snsl = ntohl(rp_ex->fr_sns_len);
861                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
862                                         snsl = SCSI_SENSE_BUFFERSIZE;
863                                 memcpy(fsp->cmd->sense_buffer,
864                                        (char *)fc_rp_info + respl, snsl);
865                         }
866                 }
867                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
868                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
869                                 goto len_err;
870                         if (flags & FCP_RESID_UNDER) {
871                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
872                                 /*
873                                  * The cmnd->underflow is the minimum number of
874                                  * bytes that must be transferred for this
875                                  * command.  Provided a sense condition is not
876                                  * present, make sure the actual amount
877                                  * transferred is at least the underflow value
878                                  * or fail.
879                                  */
880                                 if (!(flags & FCP_SNS_LEN_VAL) &&
881                                     (fc_rp->fr_status == 0) &&
882                                     (scsi_bufflen(fsp->cmd) -
883                                      fsp->scsi_resid) < fsp->cmd->underflow)
884                                         goto err;
885                                 expected_len -= fsp->scsi_resid;
886                         } else {
887                                 fsp->status_code = FC_ERROR;
888                         }
889                 }
890         }
891         fsp->state |= FC_SRB_RCV_STATUS;
892
893         /*
894          * Check for missing or extra data frames.
895          */
896         if (unlikely(fsp->xfer_len != expected_len)) {
897                 if (fsp->xfer_len < expected_len) {
898                         /*
899                          * Some data may be queued locally,
900                          * Wait a at least one jiffy to see if it is delivered.
901                          * If this expires without data, we may do SRR.
902                          */
903                         fc_fcp_timer_set(fsp, 2);
904                         return;
905                 }
906                 fsp->status_code = FC_DATA_OVRRUN;
907                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
908                            "len %x, data len %x\n",
909                            fsp->rport->port_id,
910                            fsp->xfer_len, expected_len, fsp->data_len);
911         }
912         fc_fcp_complete_locked(fsp);
913         return;
914
915 len_err:
916         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
917                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
918 err:
919         fsp->status_code = FC_ERROR;
920         fc_fcp_complete_locked(fsp);
921 }
922
923 /**
924  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
925  *                            fcp_pkt lock held
926  * @fsp: The FCP packet to be completed
927  *
928  * This function may sleep if a timer is pending. The packet lock must be
929  * held, and the host lock must not be held.
930  */
931 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
932 {
933         struct fc_lport *lport = fsp->lp;
934         struct fc_seq *seq;
935         struct fc_exch *ep;
936         u32 f_ctl;
937
938         if (fsp->state & FC_SRB_ABORT_PENDING)
939                 return;
940
941         if (fsp->state & FC_SRB_ABORTED) {
942                 if (!fsp->status_code)
943                         fsp->status_code = FC_CMD_ABORTED;
944         } else {
945                 /*
946                  * Test for transport underrun, independent of response
947                  * underrun status.
948                  */
949                 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
950                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
951                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
952                         fsp->status_code = FC_DATA_UNDRUN;
953                         fsp->io_status = 0;
954                 }
955         }
956
957         seq = fsp->seq_ptr;
958         if (seq) {
959                 fsp->seq_ptr = NULL;
960                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
961                         struct fc_frame *conf_frame;
962                         struct fc_seq *csp;
963
964                         csp = lport->tt.seq_start_next(seq);
965                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
966                         if (conf_frame) {
967                                 f_ctl = FC_FC_SEQ_INIT;
968                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
969                                 ep = fc_seq_exch(seq);
970                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
971                                                ep->did, ep->sid,
972                                                FC_TYPE_FCP, f_ctl, 0);
973                                 lport->tt.seq_send(lport, csp, conf_frame);
974                         }
975                 }
976                 lport->tt.exch_done(seq);
977         }
978         /*
979          * Some resets driven by SCSI are not I/Os and do not have
980          * SCSI commands associated with the requests. We should not
981          * call I/O completion if we do not have a SCSI command.
982          */
983         if (fsp->cmd)
984                 fc_io_compl(fsp);
985 }
986
987 /**
988  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
989  * @fsp:   The FCP packet whose exchanges should be canceled
990  * @error: The reason for the cancellation
991  */
992 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
993 {
994         struct fc_lport *lport = fsp->lp;
995
996         if (fsp->seq_ptr) {
997                 lport->tt.exch_done(fsp->seq_ptr);
998                 fsp->seq_ptr = NULL;
999         }
1000         fsp->status_code = error;
1001 }
1002
1003 /**
1004  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1005  * @lport: The local port whose exchanges should be canceled
1006  * @id:    The target's ID
1007  * @lun:   The LUN
1008  * @error: The reason for cancellation
1009  *
1010  * If lun or id is -1, they are ignored.
1011  */
1012 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1013                                     unsigned int lun, int error)
1014 {
1015         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1016         struct fc_fcp_pkt *fsp;
1017         struct scsi_cmnd *sc_cmd;
1018         unsigned long flags;
1019
1020         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1021 restart:
1022         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1023                 sc_cmd = fsp->cmd;
1024                 if (id != -1 && scmd_id(sc_cmd) != id)
1025                         continue;
1026
1027                 if (lun != -1 && sc_cmd->device->lun != lun)
1028                         continue;
1029
1030                 fc_fcp_pkt_hold(fsp);
1031                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1032
1033                 if (!fc_fcp_lock_pkt(fsp)) {
1034                         fc_fcp_cleanup_cmd(fsp, error);
1035                         fc_io_compl(fsp);
1036                         fc_fcp_unlock_pkt(fsp);
1037                 }
1038
1039                 fc_fcp_pkt_release(fsp);
1040                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1041                 /*
1042                  * while we dropped the lock multiple pkts could
1043                  * have been released, so we have to start over.
1044                  */
1045                 goto restart;
1046         }
1047         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1048 }
1049
1050 /**
1051  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1052  * @lport: The local port whose exchanges are to be aborted
1053  */
1054 static void fc_fcp_abort_io(struct fc_lport *lport)
1055 {
1056         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1057 }
1058
1059 /**
1060  * fc_fcp_pkt_send() - Send a fcp_pkt
1061  * @lport: The local port to send the FCP packet on
1062  * @fsp:   The FCP packet to send
1063  *
1064  * Return:  Zero for success and -1 for failure
1065  * Locks:   Called without locks held
1066  */
1067 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1068 {
1069         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1070         unsigned long flags;
1071         int rc;
1072
1073         fsp->cmd->SCp.ptr = (char *)fsp;
1074         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1075         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1076
1077         int_to_scsilun(fsp->cmd->device->lun,
1078                        (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1079         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1080
1081         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1082         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1083         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1084         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1085         if (unlikely(rc)) {
1086                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1087                 list_del(&fsp->list);
1088                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1089         }
1090
1091         return rc;
1092 }
1093
1094 /**
1095  * get_fsp_rec_tov() - Helper function to get REC_TOV
1096  * @fsp: the FCP packet
1097  *
1098  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1099  */
1100 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1101 {
1102         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1103
1104         return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1105 }
1106
1107 /**
1108  * fc_fcp_cmd_send() - Send a FCP command
1109  * @lport: The local port to send the command on
1110  * @fsp:   The FCP packet the command is on
1111  * @resp:  The handler for the response
1112  */
1113 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1114                            void (*resp)(struct fc_seq *,
1115                                         struct fc_frame *fp,
1116                                         void *arg))
1117 {
1118         struct fc_frame *fp;
1119         struct fc_seq *seq;
1120         struct fc_rport *rport;
1121         struct fc_rport_libfc_priv *rpriv;
1122         const size_t len = sizeof(fsp->cdb_cmd);
1123         int rc = 0;
1124
1125         if (fc_fcp_lock_pkt(fsp))
1126                 return 0;
1127
1128         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1129         if (!fp) {
1130                 rc = -1;
1131                 goto unlock;
1132         }
1133
1134         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1135         fr_fsp(fp) = fsp;
1136         rport = fsp->rport;
1137         fsp->max_payload = rport->maxframe_size;
1138         rpriv = rport->dd_data;
1139
1140         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1141                        rpriv->local_port->port_id, FC_TYPE_FCP,
1142                        FC_FCTL_REQ, 0);
1143
1144         seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1145                                       fsp, 0);
1146         if (!seq) {
1147                 rc = -1;
1148                 goto unlock;
1149         }
1150         fsp->last_pkt_time = jiffies;
1151         fsp->seq_ptr = seq;
1152         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1153
1154         setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1155         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1156                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1157
1158 unlock:
1159         fc_fcp_unlock_pkt(fsp);
1160         return rc;
1161 }
1162
1163 /**
1164  * fc_fcp_error() - Handler for FCP layer errors
1165  * @fsp: The FCP packet the error is on
1166  * @fp:  The frame that has errored
1167  */
1168 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1169 {
1170         int error = PTR_ERR(fp);
1171
1172         if (fc_fcp_lock_pkt(fsp))
1173                 return;
1174
1175         if (error == -FC_EX_CLOSED) {
1176                 fc_fcp_retry_cmd(fsp);
1177                 goto unlock;
1178         }
1179
1180         /*
1181          * clear abort pending, because the lower layer
1182          * decided to force completion.
1183          */
1184         fsp->state &= ~FC_SRB_ABORT_PENDING;
1185         fsp->status_code = FC_CMD_PLOGO;
1186         fc_fcp_complete_locked(fsp);
1187 unlock:
1188         fc_fcp_unlock_pkt(fsp);
1189 }
1190
1191 /**
1192  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1193  * @fsp:   The FCP packet to abort on
1194  *
1195  * Called to send an abort and then wait for abort completion
1196  */
1197 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1198 {
1199         int rc = FAILED;
1200         unsigned long ticks_left;
1201
1202         if (fc_fcp_send_abort(fsp))
1203                 return FAILED;
1204
1205         init_completion(&fsp->tm_done);
1206         fsp->wait_for_comp = 1;
1207
1208         spin_unlock_bh(&fsp->scsi_pkt_lock);
1209         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1210                                                         FC_SCSI_TM_TOV);
1211         spin_lock_bh(&fsp->scsi_pkt_lock);
1212         fsp->wait_for_comp = 0;
1213
1214         if (!ticks_left) {
1215                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1216         } else if (fsp->state & FC_SRB_ABORTED) {
1217                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1218                 rc = SUCCESS;
1219                 fc_fcp_complete_locked(fsp);
1220         }
1221
1222         return rc;
1223 }
1224
1225 /**
1226  * fc_lun_reset_send() - Send LUN reset command
1227  * @data: The FCP packet that identifies the LUN to be reset
1228  */
1229 static void fc_lun_reset_send(unsigned long data)
1230 {
1231         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1232         struct fc_lport *lport = fsp->lp;
1233
1234         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1235                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1236                         return;
1237                 if (fc_fcp_lock_pkt(fsp))
1238                         return;
1239                 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1240                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1241                 fc_fcp_unlock_pkt(fsp);
1242         }
1243 }
1244
1245 /**
1246  * fc_lun_reset() - Send a LUN RESET command to a device
1247  *                  and wait for the reply
1248  * @lport: The local port to sent the command on
1249  * @fsp:   The FCP packet that identifies the LUN to be reset
1250  * @id:    The SCSI command ID
1251  * @lun:   The LUN ID to be reset
1252  */
1253 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1254                         unsigned int id, unsigned int lun)
1255 {
1256         int rc;
1257
1258         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1259         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1260         int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1261
1262         fsp->wait_for_comp = 1;
1263         init_completion(&fsp->tm_done);
1264
1265         fc_lun_reset_send((unsigned long)fsp);
1266
1267         /*
1268          * wait for completion of reset
1269          * after that make sure all commands are terminated
1270          */
1271         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1272
1273         spin_lock_bh(&fsp->scsi_pkt_lock);
1274         fsp->state |= FC_SRB_COMPL;
1275         spin_unlock_bh(&fsp->scsi_pkt_lock);
1276
1277         del_timer_sync(&fsp->timer);
1278
1279         spin_lock_bh(&fsp->scsi_pkt_lock);
1280         if (fsp->seq_ptr) {
1281                 lport->tt.exch_done(fsp->seq_ptr);
1282                 fsp->seq_ptr = NULL;
1283         }
1284         fsp->wait_for_comp = 0;
1285         spin_unlock_bh(&fsp->scsi_pkt_lock);
1286
1287         if (!rc) {
1288                 FC_SCSI_DBG(lport, "lun reset failed\n");
1289                 return FAILED;
1290         }
1291
1292         /* cdb_status holds the tmf's rsp code */
1293         if (fsp->cdb_status != FCP_TMF_CMPL)
1294                 return FAILED;
1295
1296         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1297         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1298         return SUCCESS;
1299 }
1300
1301 /**
1302  * fc_tm_done() - Task Management response handler
1303  * @seq: The sequence that the response is on
1304  * @fp:  The response frame
1305  * @arg: The FCP packet the response is for
1306  */
1307 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1308 {
1309         struct fc_fcp_pkt *fsp = arg;
1310         struct fc_frame_header *fh;
1311
1312         if (IS_ERR(fp)) {
1313                 /*
1314                  * If there is an error just let it timeout or wait
1315                  * for TMF to be aborted if it timedout.
1316                  *
1317                  * scsi-eh will escalate for when either happens.
1318                  */
1319                 return;
1320         }
1321
1322         if (fc_fcp_lock_pkt(fsp))
1323                 goto out;
1324
1325         /*
1326          * raced with eh timeout handler.
1327          */
1328         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1329                 goto out_unlock;
1330
1331         fh = fc_frame_header_get(fp);
1332         if (fh->fh_type != FC_TYPE_BLS)
1333                 fc_fcp_resp(fsp, fp);
1334         fsp->seq_ptr = NULL;
1335         fsp->lp->tt.exch_done(seq);
1336 out_unlock:
1337         fc_fcp_unlock_pkt(fsp);
1338 out:
1339         fc_frame_free(fp);
1340 }
1341
1342 /**
1343  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1344  * @lport: The local port to be cleaned up
1345  */
1346 static void fc_fcp_cleanup(struct fc_lport *lport)
1347 {
1348         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1349 }
1350
1351 /**
1352  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1353  * @data: The FCP packet that has timed out
1354  *
1355  * If REC is supported then just issue it and return. The REC exchange will
1356  * complete or time out and recovery can continue at that point. Otherwise,
1357  * if the response has been received without all the data it has been
1358  * ER_TIMEOUT since the response was received. If the response has not been
1359  * received we see if data was received recently. If it has been then we
1360  * continue waiting, otherwise, we abort the command.
1361  */
1362 static void fc_fcp_timeout(unsigned long data)
1363 {
1364         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1365         struct fc_rport *rport = fsp->rport;
1366         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1367
1368         if (fc_fcp_lock_pkt(fsp))
1369                 return;
1370
1371         if (fsp->cdb_cmd.fc_tm_flags)
1372                 goto unlock;
1373
1374         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1375
1376         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1377                 fc_fcp_rec(fsp);
1378         else if (fsp->state & FC_SRB_RCV_STATUS)
1379                 fc_fcp_complete_locked(fsp);
1380         else
1381                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1382         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1383 unlock:
1384         fc_fcp_unlock_pkt(fsp);
1385 }
1386
1387 /**
1388  * fc_fcp_rec() - Send a REC ELS request
1389  * @fsp: The FCP packet to send the REC request on
1390  */
1391 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1392 {
1393         struct fc_lport *lport;
1394         struct fc_frame *fp;
1395         struct fc_rport *rport;
1396         struct fc_rport_libfc_priv *rpriv;
1397
1398         lport = fsp->lp;
1399         rport = fsp->rport;
1400         rpriv = rport->dd_data;
1401         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1402                 fsp->status_code = FC_HRD_ERROR;
1403                 fsp->io_status = 0;
1404                 fc_fcp_complete_locked(fsp);
1405                 return;
1406         }
1407
1408         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1409         if (!fp)
1410                 goto retry;
1411
1412         fr_seq(fp) = fsp->seq_ptr;
1413         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1414                        rpriv->local_port->port_id, FC_TYPE_ELS,
1415                        FC_FCTL_REQ, 0);
1416         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1417                                  fc_fcp_rec_resp, fsp,
1418                                  2 * lport->r_a_tov)) {
1419                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1420                 return;
1421         }
1422 retry:
1423         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1424                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1425         else
1426                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1427 }
1428
1429 /**
1430  * fc_fcp_rec_resp() - Handler for REC ELS responses
1431  * @seq: The sequence the response is on
1432  * @fp:  The response frame
1433  * @arg: The FCP packet the response is on
1434  *
1435  * If the response is a reject then the scsi layer will handle
1436  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1437  * set the timeout and return. If the I/O was completed then complete the
1438  * exchange and tell the SCSI layer.
1439  */
1440 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1441 {
1442         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1443         struct fc_els_rec_acc *recp;
1444         struct fc_els_ls_rjt *rjt;
1445         u32 e_stat;
1446         u8 opcode;
1447         u32 offset;
1448         enum dma_data_direction data_dir;
1449         enum fc_rctl r_ctl;
1450         struct fc_rport_libfc_priv *rpriv;
1451
1452         if (IS_ERR(fp)) {
1453                 fc_fcp_rec_error(fsp, fp);
1454                 return;
1455         }
1456
1457         if (fc_fcp_lock_pkt(fsp))
1458                 goto out;
1459
1460         fsp->recov_retry = 0;
1461         opcode = fc_frame_payload_op(fp);
1462         if (opcode == ELS_LS_RJT) {
1463                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1464                 switch (rjt->er_reason) {
1465                 default:
1466                         FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1467                                    "reason %d expl %d\n",
1468                                    fsp->rport->port_id, rjt->er_reason,
1469                                    rjt->er_explan);
1470                         /* fall through */
1471                 case ELS_RJT_UNSUP:
1472                         FC_FCP_DBG(fsp, "device does not support REC\n");
1473                         rpriv = fsp->rport->dd_data;
1474                         /*
1475                          * if we do not spport RECs or got some bogus
1476                          * reason then resetup timer so we check for
1477                          * making progress.
1478                          */
1479                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1480                         break;
1481                 case ELS_RJT_LOGIC:
1482                 case ELS_RJT_UNAB:
1483                         /*
1484                          * If no data transfer, the command frame got dropped
1485                          * so we just retry.  If data was transferred, we
1486                          * lost the response but the target has no record,
1487                          * so we abort and retry.
1488                          */
1489                         if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1490                             fsp->xfer_len == 0) {
1491                                 fc_fcp_retry_cmd(fsp);
1492                                 break;
1493                         }
1494                         fc_fcp_recovery(fsp, FC_ERROR);
1495                         break;
1496                 }
1497         } else if (opcode == ELS_LS_ACC) {
1498                 if (fsp->state & FC_SRB_ABORTED)
1499                         goto unlock_out;
1500
1501                 data_dir = fsp->cmd->sc_data_direction;
1502                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1503                 offset = ntohl(recp->reca_fc4value);
1504                 e_stat = ntohl(recp->reca_e_stat);
1505
1506                 if (e_stat & ESB_ST_COMPLETE) {
1507
1508                         /*
1509                          * The exchange is complete.
1510                          *
1511                          * For output, we must've lost the response.
1512                          * For input, all data must've been sent.
1513                          * We lost may have lost the response
1514                          * (and a confirmation was requested) and maybe
1515                          * some data.
1516                          *
1517                          * If all data received, send SRR
1518                          * asking for response.  If partial data received,
1519                          * or gaps, SRR requests data at start of gap.
1520                          * Recovery via SRR relies on in-order-delivery.
1521                          */
1522                         if (data_dir == DMA_TO_DEVICE) {
1523                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1524                         } else if (fsp->xfer_contig_end == offset) {
1525                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1526                         } else {
1527                                 offset = fsp->xfer_contig_end;
1528                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1529                         }
1530                         fc_fcp_srr(fsp, r_ctl, offset);
1531                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1532                         /*
1533                          * The remote port has the initiative, so just
1534                          * keep waiting for it to complete.
1535                          */
1536                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1537                 } else {
1538
1539                         /*
1540                          * The exchange is incomplete, we have seq. initiative.
1541                          * Lost response with requested confirmation,
1542                          * lost confirmation, lost transfer ready or
1543                          * lost write data.
1544                          *
1545                          * For output, if not all data was received, ask
1546                          * for transfer ready to be repeated.
1547                          *
1548                          * If we received or sent all the data, send SRR to
1549                          * request response.
1550                          *
1551                          * If we lost a response, we may have lost some read
1552                          * data as well.
1553                          */
1554                         r_ctl = FC_RCTL_DD_SOL_DATA;
1555                         if (data_dir == DMA_TO_DEVICE) {
1556                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1557                                 if (offset < fsp->data_len)
1558                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1559                         } else if (offset == fsp->xfer_contig_end) {
1560                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1561                         } else if (fsp->xfer_contig_end < offset) {
1562                                 offset = fsp->xfer_contig_end;
1563                         }
1564                         fc_fcp_srr(fsp, r_ctl, offset);
1565                 }
1566         }
1567 unlock_out:
1568         fc_fcp_unlock_pkt(fsp);
1569 out:
1570         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1571         fc_frame_free(fp);
1572 }
1573
1574 /**
1575  * fc_fcp_rec_error() - Handler for REC errors
1576  * @fsp: The FCP packet the error is on
1577  * @fp:  The REC frame
1578  */
1579 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1580 {
1581         int error = PTR_ERR(fp);
1582
1583         if (fc_fcp_lock_pkt(fsp))
1584                 goto out;
1585
1586         switch (error) {
1587         case -FC_EX_CLOSED:
1588                 fc_fcp_retry_cmd(fsp);
1589                 break;
1590
1591         default:
1592                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1593                            fsp, fsp->rport->port_id, error);
1594                 fsp->status_code = FC_CMD_PLOGO;
1595                 /* fall through */
1596
1597         case -FC_EX_TIMEOUT:
1598                 /*
1599                  * Assume REC or LS_ACC was lost.
1600                  * The exchange manager will have aborted REC, so retry.
1601                  */
1602                 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1603                            fsp->rport->port_id, error, fsp->recov_retry,
1604                            FC_MAX_RECOV_RETRY);
1605                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1606                         fc_fcp_rec(fsp);
1607                 else
1608                         fc_fcp_recovery(fsp, FC_ERROR);
1609                 break;
1610         }
1611         fc_fcp_unlock_pkt(fsp);
1612 out:
1613         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1614 }
1615
1616 /**
1617  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1618  * @fsp: The FCP pkt that needs to be aborted
1619  */
1620 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1621 {
1622         fsp->status_code = code;
1623         fsp->cdb_status = 0;
1624         fsp->io_status = 0;
1625         /*
1626          * if this fails then we let the scsi command timer fire and
1627          * scsi-ml escalate.
1628          */
1629         fc_fcp_send_abort(fsp);
1630 }
1631
1632 /**
1633  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1634  * @fsp:   The FCP packet the SRR is to be sent on
1635  * @r_ctl: The R_CTL field for the SRR request
1636  * This is called after receiving status but insufficient data, or
1637  * when expecting status but the request has timed out.
1638  */
1639 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1640 {
1641         struct fc_lport *lport = fsp->lp;
1642         struct fc_rport *rport;
1643         struct fc_rport_libfc_priv *rpriv;
1644         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1645         struct fc_seq *seq;
1646         struct fcp_srr *srr;
1647         struct fc_frame *fp;
1648         unsigned int rec_tov;
1649
1650         rport = fsp->rport;
1651         rpriv = rport->dd_data;
1652
1653         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1654             rpriv->rp_state != RPORT_ST_READY)
1655                 goto retry;                     /* shouldn't happen */
1656         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1657         if (!fp)
1658                 goto retry;
1659
1660         srr = fc_frame_payload_get(fp, sizeof(*srr));
1661         memset(srr, 0, sizeof(*srr));
1662         srr->srr_op = ELS_SRR;
1663         srr->srr_ox_id = htons(ep->oxid);
1664         srr->srr_rx_id = htons(ep->rxid);
1665         srr->srr_r_ctl = r_ctl;
1666         srr->srr_rel_off = htonl(offset);
1667
1668         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1669                        rpriv->local_port->port_id, FC_TYPE_FCP,
1670                        FC_FCTL_REQ, 0);
1671
1672         rec_tov = get_fsp_rec_tov(fsp);
1673         seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1674                                       fc_fcp_pkt_destroy,
1675                                       fsp, jiffies_to_msecs(rec_tov));
1676         if (!seq)
1677                 goto retry;
1678
1679         fsp->recov_seq = seq;
1680         fsp->xfer_len = offset;
1681         fsp->xfer_contig_end = offset;
1682         fsp->state &= ~FC_SRB_RCV_STATUS;
1683         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1684         return;
1685 retry:
1686         fc_fcp_retry_cmd(fsp);
1687 }
1688
1689 /**
1690  * fc_fcp_srr_resp() - Handler for SRR response
1691  * @seq: The sequence the SRR is on
1692  * @fp:  The SRR frame
1693  * @arg: The FCP packet the SRR is on
1694  */
1695 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1696 {
1697         struct fc_fcp_pkt *fsp = arg;
1698         struct fc_frame_header *fh;
1699
1700         if (IS_ERR(fp)) {
1701                 fc_fcp_srr_error(fsp, fp);
1702                 return;
1703         }
1704
1705         if (fc_fcp_lock_pkt(fsp))
1706                 goto out;
1707
1708         fh = fc_frame_header_get(fp);
1709         /*
1710          * BUG? fc_fcp_srr_error calls exch_done which would release
1711          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1712          * then fc_exch_timeout would be sending an abort. The exch_done
1713          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1714          * an abort response though.
1715          */
1716         if (fh->fh_type == FC_TYPE_BLS) {
1717                 fc_fcp_unlock_pkt(fsp);
1718                 return;
1719         }
1720
1721         switch (fc_frame_payload_op(fp)) {
1722         case ELS_LS_ACC:
1723                 fsp->recov_retry = 0;
1724                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1725                 break;
1726         case ELS_LS_RJT:
1727         default:
1728                 fc_fcp_recovery(fsp, FC_ERROR);
1729                 break;
1730         }
1731         fc_fcp_unlock_pkt(fsp);
1732 out:
1733         fsp->lp->tt.exch_done(seq);
1734         fc_frame_free(fp);
1735 }
1736
1737 /**
1738  * fc_fcp_srr_error() - Handler for SRR errors
1739  * @fsp: The FCP packet that the SRR error is on
1740  * @fp:  The SRR frame
1741  */
1742 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1743 {
1744         if (fc_fcp_lock_pkt(fsp))
1745                 goto out;
1746         switch (PTR_ERR(fp)) {
1747         case -FC_EX_TIMEOUT:
1748                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1749                         fc_fcp_rec(fsp);
1750                 else
1751                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1752                 break;
1753         case -FC_EX_CLOSED:                     /* e.g., link failure */
1754                 /* fall through */
1755         default:
1756                 fc_fcp_retry_cmd(fsp);
1757                 break;
1758         }
1759         fc_fcp_unlock_pkt(fsp);
1760 out:
1761         fsp->lp->tt.exch_done(fsp->recov_seq);
1762 }
1763
1764 /**
1765  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1766  * @lport: The local port to be checked
1767  */
1768 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1769 {
1770         /* lock ? */
1771         return (lport->state == LPORT_ST_READY) &&
1772                 lport->link_up && !lport->qfull;
1773 }
1774
1775 /**
1776  * fc_queuecommand() - The queuecommand function of the SCSI template
1777  * @shost: The Scsi_Host that the command was issued to
1778  * @cmd:   The scsi_cmnd to be executed
1779  *
1780  * This is the i/o strategy routine, called by the SCSI layer.
1781  */
1782 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1783 {
1784         struct fc_lport *lport = shost_priv(shost);
1785         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1786         struct fc_fcp_pkt *fsp;
1787         struct fc_rport_libfc_priv *rpriv;
1788         int rval;
1789         int rc = 0;
1790         struct fcoe_dev_stats *stats;
1791
1792         rval = fc_remote_port_chkready(rport);
1793         if (rval) {
1794                 sc_cmd->result = rval;
1795                 sc_cmd->scsi_done(sc_cmd);
1796                 return 0;
1797         }
1798
1799         if (!*(struct fc_remote_port **)rport->dd_data) {
1800                 /*
1801                  * rport is transitioning from blocked/deleted to
1802                  * online
1803                  */
1804                 sc_cmd->result = DID_IMM_RETRY << 16;
1805                 sc_cmd->scsi_done(sc_cmd);
1806                 goto out;
1807         }
1808
1809         rpriv = rport->dd_data;
1810
1811         if (!fc_fcp_lport_queue_ready(lport)) {
1812                 if (lport->qfull)
1813                         fc_fcp_can_queue_ramp_down(lport);
1814                 rc = SCSI_MLQUEUE_HOST_BUSY;
1815                 goto out;
1816         }
1817
1818         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1819         if (fsp == NULL) {
1820                 rc = SCSI_MLQUEUE_HOST_BUSY;
1821                 goto out;
1822         }
1823
1824         /*
1825          * build the libfc request pkt
1826          */
1827         fsp->cmd = sc_cmd;      /* save the cmd */
1828         fsp->rport = rport;     /* set the remote port ptr */
1829
1830         /*
1831          * set up the transfer length
1832          */
1833         fsp->data_len = scsi_bufflen(sc_cmd);
1834         fsp->xfer_len = 0;
1835
1836         /*
1837          * setup the data direction
1838          */
1839         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1840         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1841                 fsp->req_flags = FC_SRB_READ;
1842                 stats->InputRequests++;
1843                 stats->InputBytes += fsp->data_len;
1844         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1845                 fsp->req_flags = FC_SRB_WRITE;
1846                 stats->OutputRequests++;
1847                 stats->OutputBytes += fsp->data_len;
1848         } else {
1849                 fsp->req_flags = 0;
1850                 stats->ControlRequests++;
1851         }
1852         put_cpu();
1853
1854         init_timer(&fsp->timer);
1855         fsp->timer.data = (unsigned long)fsp;
1856
1857         /*
1858          * send it to the lower layer
1859          * if we get -1 return then put the request in the pending
1860          * queue.
1861          */
1862         rval = fc_fcp_pkt_send(lport, fsp);
1863         if (rval != 0) {
1864                 fsp->state = FC_SRB_FREE;
1865                 fc_fcp_pkt_release(fsp);
1866                 rc = SCSI_MLQUEUE_HOST_BUSY;
1867         }
1868 out:
1869         return rc;
1870 }
1871 EXPORT_SYMBOL(fc_queuecommand);
1872
1873 /**
1874  * fc_io_compl() - Handle responses for completed commands
1875  * @fsp: The FCP packet that is complete
1876  *
1877  * Translates fcp_pkt errors to a Linux SCSI errors.
1878  * The fcp packet lock must be held when calling.
1879  */
1880 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1881 {
1882         struct fc_fcp_internal *si;
1883         struct scsi_cmnd *sc_cmd;
1884         struct fc_lport *lport;
1885         unsigned long flags;
1886
1887         /* release outstanding ddp context */
1888         fc_fcp_ddp_done(fsp);
1889
1890         fsp->state |= FC_SRB_COMPL;
1891         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1892                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1893                 del_timer_sync(&fsp->timer);
1894                 spin_lock_bh(&fsp->scsi_pkt_lock);
1895         }
1896
1897         lport = fsp->lp;
1898         si = fc_get_scsi_internal(lport);
1899
1900         /*
1901          * if can_queue ramp down is done then try can_queue ramp up
1902          * since commands are completing now.
1903          */
1904         if (si->last_can_queue_ramp_down_time)
1905                 fc_fcp_can_queue_ramp_up(lport);
1906
1907         sc_cmd = fsp->cmd;
1908         CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1909         switch (fsp->status_code) {
1910         case FC_COMPLETE:
1911                 if (fsp->cdb_status == 0) {
1912                         /*
1913                          * good I/O status
1914                          */
1915                         sc_cmd->result = DID_OK << 16;
1916                         if (fsp->scsi_resid)
1917                                 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1918                 } else {
1919                         /*
1920                          * transport level I/O was ok but scsi
1921                          * has non zero status
1922                          */
1923                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1924                 }
1925                 break;
1926         case FC_ERROR:
1927                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1928                            "due to FC_ERROR\n");
1929                 sc_cmd->result = DID_ERROR << 16;
1930                 break;
1931         case FC_DATA_UNDRUN:
1932                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1933                         /*
1934                          * scsi status is good but transport level
1935                          * underrun.
1936                          */
1937                         if (fsp->state & FC_SRB_RCV_STATUS) {
1938                                 sc_cmd->result = DID_OK << 16;
1939                         } else {
1940                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1941                                            " due to FC_DATA_UNDRUN (trans)\n");
1942                                 sc_cmd->result = DID_ERROR << 16;
1943                         }
1944                 } else {
1945                         /*
1946                          * scsi got underrun, this is an error
1947                          */
1948                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1949                                    "due to FC_DATA_UNDRUN (scsi)\n");
1950                         CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1951                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1952                 }
1953                 break;
1954         case FC_DATA_OVRRUN:
1955                 /*
1956                  * overrun is an error
1957                  */
1958                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1959                            "due to FC_DATA_OVRRUN\n");
1960                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1961                 break;
1962         case FC_CMD_ABORTED:
1963                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1964                           "due to FC_CMD_ABORTED\n");
1965                 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1966                 break;
1967         case FC_CMD_RESET:
1968                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1969                            "due to FC_CMD_RESET\n");
1970                 sc_cmd->result = (DID_RESET << 16);
1971                 break;
1972         case FC_HRD_ERROR:
1973                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1974                            "due to FC_HRD_ERROR\n");
1975                 sc_cmd->result = (DID_NO_CONNECT << 16);
1976                 break;
1977         case FC_CRC_ERROR:
1978                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1979                            "due to FC_CRC_ERROR\n");
1980                 sc_cmd->result = (DID_PARITY << 16);
1981                 break;
1982         case FC_TIMED_OUT:
1983                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1984                            "due to FC_TIMED_OUT\n");
1985                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1986                 break;
1987         default:
1988                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1989                            "due to unknown error\n");
1990                 sc_cmd->result = (DID_ERROR << 16);
1991                 break;
1992         }
1993
1994         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
1995                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
1996
1997         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1998         list_del(&fsp->list);
1999         sc_cmd->SCp.ptr = NULL;
2000         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2001         sc_cmd->scsi_done(sc_cmd);
2002
2003         /* release ref from initial allocation in queue command */
2004         fc_fcp_pkt_release(fsp);
2005 }
2006
2007 /**
2008  * fc_eh_abort() - Abort a command
2009  * @sc_cmd: The SCSI command to abort
2010  *
2011  * From SCSI host template.
2012  * Send an ABTS to the target device and wait for the response.
2013  */
2014 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2015 {
2016         struct fc_fcp_pkt *fsp;
2017         struct fc_lport *lport;
2018         struct fc_fcp_internal *si;
2019         int rc = FAILED;
2020         unsigned long flags;
2021
2022         lport = shost_priv(sc_cmd->device->host);
2023         if (lport->state != LPORT_ST_READY)
2024                 return rc;
2025         else if (!lport->link_up)
2026                 return rc;
2027
2028         si = fc_get_scsi_internal(lport);
2029         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2030         fsp = CMD_SP(sc_cmd);
2031         if (!fsp) {
2032                 /* command completed while scsi eh was setting up */
2033                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2034                 return SUCCESS;
2035         }
2036         /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2037         fc_fcp_pkt_hold(fsp);
2038         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2039
2040         if (fc_fcp_lock_pkt(fsp)) {
2041                 /* completed while we were waiting for timer to be deleted */
2042                 rc = SUCCESS;
2043                 goto release_pkt;
2044         }
2045
2046         rc = fc_fcp_pkt_abort(fsp);
2047         fc_fcp_unlock_pkt(fsp);
2048
2049 release_pkt:
2050         fc_fcp_pkt_release(fsp);
2051         return rc;
2052 }
2053 EXPORT_SYMBOL(fc_eh_abort);
2054
2055 /**
2056  * fc_eh_device_reset() - Reset a single LUN
2057  * @sc_cmd: The SCSI command which identifies the device whose
2058  *          LUN is to be reset
2059  *
2060  * Set from SCSI host template.
2061  */
2062 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2063 {
2064         struct fc_lport *lport;
2065         struct fc_fcp_pkt *fsp;
2066         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2067         int rc = FAILED;
2068         int rval;
2069
2070         rval = fc_remote_port_chkready(rport);
2071         if (rval)
2072                 goto out;
2073
2074         lport = shost_priv(sc_cmd->device->host);
2075
2076         if (lport->state != LPORT_ST_READY)
2077                 return rc;
2078
2079         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2080
2081         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2082         if (fsp == NULL) {
2083                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2084                 goto out;
2085         }
2086
2087         /*
2088          * Build the libfc request pkt. Do not set the scsi cmnd, because
2089          * the sc passed in is not setup for execution like when sent
2090          * through the queuecommand callout.
2091          */
2092         fsp->rport = rport;     /* set the remote port ptr */
2093
2094         /*
2095          * flush outstanding commands
2096          */
2097         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2098         fsp->state = FC_SRB_FREE;
2099         fc_fcp_pkt_release(fsp);
2100
2101 out:
2102         return rc;
2103 }
2104 EXPORT_SYMBOL(fc_eh_device_reset);
2105
2106 /**
2107  * fc_eh_host_reset() - Reset a Scsi_Host.
2108  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2109  */
2110 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2111 {
2112         struct Scsi_Host *shost = sc_cmd->device->host;
2113         struct fc_lport *lport = shost_priv(shost);
2114         unsigned long wait_tmo;
2115
2116         FC_SCSI_DBG(lport, "Resetting host\n");
2117
2118         lport->tt.lport_reset(lport);
2119         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2120         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2121                                                                wait_tmo))
2122                 msleep(1000);
2123
2124         if (fc_fcp_lport_queue_ready(lport)) {
2125                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2126                              "on port (%6.6x)\n", lport->port_id);
2127                 return SUCCESS;
2128         } else {
2129                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2130                              "port (%6.6x) is not ready.\n",
2131                              lport->port_id);
2132                 return FAILED;
2133         }
2134 }
2135 EXPORT_SYMBOL(fc_eh_host_reset);
2136
2137 /**
2138  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2139  * @sdev: The SCSI device that identifies the SCSI host
2140  *
2141  * Configures queue depth based on host's cmd_per_len. If not set
2142  * then we use the libfc default.
2143  */
2144 int fc_slave_alloc(struct scsi_device *sdev)
2145 {
2146         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2147
2148         if (!rport || fc_remote_port_chkready(rport))
2149                 return -ENXIO;
2150
2151         if (sdev->tagged_supported)
2152                 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2153         else
2154                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2155                                         FC_FCP_DFLT_QUEUE_DEPTH);
2156
2157         return 0;
2158 }
2159 EXPORT_SYMBOL(fc_slave_alloc);
2160
2161 /**
2162  * fc_change_queue_depth() - Change a device's queue depth
2163  * @sdev:   The SCSI device whose queue depth is to change
2164  * @qdepth: The new queue depth
2165  * @reason: The resason for the change
2166  */
2167 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2168 {
2169         switch (reason) {
2170         case SCSI_QDEPTH_DEFAULT:
2171                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2172                 break;
2173         case SCSI_QDEPTH_QFULL:
2174                 scsi_track_queue_full(sdev, qdepth);
2175                 break;
2176         case SCSI_QDEPTH_RAMP_UP:
2177                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2178                 break;
2179         default:
2180                 return -EOPNOTSUPP;
2181         }
2182         return sdev->queue_depth;
2183 }
2184 EXPORT_SYMBOL(fc_change_queue_depth);
2185
2186 /**
2187  * fc_change_queue_type() - Change a device's queue type
2188  * @sdev:     The SCSI device whose queue depth is to change
2189  * @tag_type: Identifier for queue type
2190  */
2191 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2192 {
2193         if (sdev->tagged_supported) {
2194                 scsi_set_tag_type(sdev, tag_type);
2195                 if (tag_type)
2196                         scsi_activate_tcq(sdev, sdev->queue_depth);
2197                 else
2198                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
2199         } else
2200                 tag_type = 0;
2201
2202         return tag_type;
2203 }
2204 EXPORT_SYMBOL(fc_change_queue_type);
2205
2206 /**
2207  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2208  * @lport: The local port that no longer needs the FCP layer
2209  */
2210 void fc_fcp_destroy(struct fc_lport *lport)
2211 {
2212         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2213
2214         if (!list_empty(&si->scsi_pkt_queue))
2215                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2216                        "port (%6.6x)\n", lport->port_id);
2217
2218         mempool_destroy(si->scsi_pkt_pool);
2219         kfree(si);
2220         lport->scsi_priv = NULL;
2221 }
2222 EXPORT_SYMBOL(fc_fcp_destroy);
2223
2224 int fc_setup_fcp(void)
2225 {
2226         int rc = 0;
2227
2228         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2229                                             sizeof(struct fc_fcp_pkt),
2230                                             0, SLAB_HWCACHE_ALIGN, NULL);
2231         if (!scsi_pkt_cachep) {
2232                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2233                        "module load failed!");
2234                 rc = -ENOMEM;
2235         }
2236
2237         return rc;
2238 }
2239
2240 void fc_destroy_fcp(void)
2241 {
2242         if (scsi_pkt_cachep)
2243                 kmem_cache_destroy(scsi_pkt_cachep);
2244 }
2245
2246 /**
2247  * fc_fcp_init() - Initialize the FCP layer for a local port
2248  * @lport: The local port to initialize the exchange layer for
2249  */
2250 int fc_fcp_init(struct fc_lport *lport)
2251 {
2252         int rc;
2253         struct fc_fcp_internal *si;
2254
2255         if (!lport->tt.fcp_cmd_send)
2256                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2257
2258         if (!lport->tt.fcp_cleanup)
2259                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2260
2261         if (!lport->tt.fcp_abort_io)
2262                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2263
2264         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2265         if (!si)
2266                 return -ENOMEM;
2267         lport->scsi_priv = si;
2268         si->max_can_queue = lport->host->can_queue;
2269         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2270         spin_lock_init(&si->scsi_queue_lock);
2271
2272         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2273         if (!si->scsi_pkt_pool) {
2274                 rc = -ENOMEM;
2275                 goto free_internal;
2276         }
2277         return 0;
2278
2279 free_internal:
2280         kfree(si);
2281         return rc;
2282 }
2283 EXPORT_SYMBOL(fc_fcp_init);