2 * libata-core.c - helper library for ATA
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
35 #include <linux/config.h>
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/pci.h>
39 #include <linux/init.h>
40 #include <linux/list.h>
42 #include <linux/highmem.h>
43 #include <linux/spinlock.h>
44 #include <linux/blkdev.h>
45 #include <linux/delay.h>
46 #include <linux/timer.h>
47 #include <linux/interrupt.h>
48 #include <linux/completion.h>
49 #include <linux/suspend.h>
50 #include <linux/workqueue.h>
51 #include <linux/jiffies.h>
52 #include <linux/scatterlist.h>
53 #include <scsi/scsi.h>
54 #include "scsi_priv.h"
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_host.h>
57 #include <linux/libata.h>
59 #include <asm/semaphore.h>
60 #include <asm/byteorder.h>
64 static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
65 static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
66 static void ata_set_mode(struct ata_port *ap);
67 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
68 static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
69 static int fgb(u32 bitmap);
70 static int ata_choose_xfer_mode(const struct ata_port *ap,
72 unsigned int *xfer_shift_out);
74 static unsigned int ata_unique_id = 1;
75 static struct workqueue_struct *ata_wq;
77 int atapi_enabled = 0;
78 module_param(atapi_enabled, int, 0444);
79 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
81 MODULE_AUTHOR("Jeff Garzik");
82 MODULE_DESCRIPTION("Library module for ATA devices");
83 MODULE_LICENSE("GPL");
84 MODULE_VERSION(DRV_VERSION);
88 * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
89 * @tf: Taskfile to convert
90 * @fis: Buffer into which data will output
91 * @pmp: Port multiplier port
93 * Converts a standard ATA taskfile to a Serial ATA
94 * FIS structure (Register - Host to Device).
97 * Inherited from caller.
100 void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
102 fis[0] = 0x27; /* Register - Host to Device FIS */
103 fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
104 bit 7 indicates Command FIS */
105 fis[2] = tf->command;
106 fis[3] = tf->feature;
113 fis[8] = tf->hob_lbal;
114 fis[9] = tf->hob_lbam;
115 fis[10] = tf->hob_lbah;
116 fis[11] = tf->hob_feature;
119 fis[13] = tf->hob_nsect;
130 * ata_tf_from_fis - Convert SATA FIS to ATA taskfile
131 * @fis: Buffer from which data will be input
132 * @tf: Taskfile to output
134 * Converts a serial ATA FIS structure to a standard ATA taskfile.
137 * Inherited from caller.
140 void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
142 tf->command = fis[2]; /* status */
143 tf->feature = fis[3]; /* error */
150 tf->hob_lbal = fis[8];
151 tf->hob_lbam = fis[9];
152 tf->hob_lbah = fis[10];
155 tf->hob_nsect = fis[13];
158 static const u8 ata_rw_cmds[] = {
162 ATA_CMD_READ_MULTI_EXT,
163 ATA_CMD_WRITE_MULTI_EXT,
167 ATA_CMD_WRITE_MULTI_FUA_EXT,
171 ATA_CMD_PIO_READ_EXT,
172 ATA_CMD_PIO_WRITE_EXT,
185 ATA_CMD_WRITE_FUA_EXT
189 * ata_rwcmd_protocol - set taskfile r/w commands and protocol
190 * @qc: command to examine and configure
192 * Examine the device configuration and tf->flags to calculate
193 * the proper read/write commands and protocol to use.
198 int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
200 struct ata_taskfile *tf = &qc->tf;
201 struct ata_device *dev = qc->dev;
204 int index, fua, lba48, write;
206 fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
207 lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
208 write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
210 if (dev->flags & ATA_DFLAG_PIO) {
211 tf->protocol = ATA_PROT_PIO;
212 index = dev->multi_count ? 0 : 8;
213 } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
214 /* Unable to use DMA due to host limitation */
215 tf->protocol = ATA_PROT_PIO;
216 index = dev->multi_count ? 0 : 4;
218 tf->protocol = ATA_PROT_DMA;
222 cmd = ata_rw_cmds[index + fua + lba48 + write];
230 static const char * const xfer_mode_str[] = {
250 * ata_udma_string - convert UDMA bit offset to string
251 * @mask: mask of bits supported; only highest bit counts.
253 * Determine string which represents the highest speed
254 * (highest bit in @udma_mask).
260 * Constant C string representing highest speed listed in
261 * @udma_mask, or the constant C string "<n/a>".
264 static const char *ata_mode_string(unsigned int mask)
268 for (i = 7; i >= 0; i--)
271 for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--)
274 for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--)
281 return xfer_mode_str[i];
285 * ata_pio_devchk - PATA device presence detection
286 * @ap: ATA channel to examine
287 * @device: Device to examine (starting at zero)
289 * This technique was originally described in
290 * Hale Landis's ATADRVR (www.ata-atapi.com), and
291 * later found its way into the ATA/ATAPI spec.
293 * Write a pattern to the ATA shadow registers,
294 * and if a device is present, it will respond by
295 * correctly storing and echoing back the
296 * ATA shadow register contents.
302 static unsigned int ata_pio_devchk(struct ata_port *ap,
305 struct ata_ioports *ioaddr = &ap->ioaddr;
308 ap->ops->dev_select(ap, device);
310 outb(0x55, ioaddr->nsect_addr);
311 outb(0xaa, ioaddr->lbal_addr);
313 outb(0xaa, ioaddr->nsect_addr);
314 outb(0x55, ioaddr->lbal_addr);
316 outb(0x55, ioaddr->nsect_addr);
317 outb(0xaa, ioaddr->lbal_addr);
319 nsect = inb(ioaddr->nsect_addr);
320 lbal = inb(ioaddr->lbal_addr);
322 if ((nsect == 0x55) && (lbal == 0xaa))
323 return 1; /* we found a device */
325 return 0; /* nothing found */
329 * ata_mmio_devchk - PATA device presence detection
330 * @ap: ATA channel to examine
331 * @device: Device to examine (starting at zero)
333 * This technique was originally described in
334 * Hale Landis's ATADRVR (www.ata-atapi.com), and
335 * later found its way into the ATA/ATAPI spec.
337 * Write a pattern to the ATA shadow registers,
338 * and if a device is present, it will respond by
339 * correctly storing and echoing back the
340 * ATA shadow register contents.
346 static unsigned int ata_mmio_devchk(struct ata_port *ap,
349 struct ata_ioports *ioaddr = &ap->ioaddr;
352 ap->ops->dev_select(ap, device);
354 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
355 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
357 writeb(0xaa, (void __iomem *) ioaddr->nsect_addr);
358 writeb(0x55, (void __iomem *) ioaddr->lbal_addr);
360 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
361 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
363 nsect = readb((void __iomem *) ioaddr->nsect_addr);
364 lbal = readb((void __iomem *) ioaddr->lbal_addr);
366 if ((nsect == 0x55) && (lbal == 0xaa))
367 return 1; /* we found a device */
369 return 0; /* nothing found */
373 * ata_devchk - PATA device presence detection
374 * @ap: ATA channel to examine
375 * @device: Device to examine (starting at zero)
377 * Dispatch ATA device presence detection, depending
378 * on whether we are using PIO or MMIO to talk to the
379 * ATA shadow registers.
385 static unsigned int ata_devchk(struct ata_port *ap,
388 if (ap->flags & ATA_FLAG_MMIO)
389 return ata_mmio_devchk(ap, device);
390 return ata_pio_devchk(ap, device);
394 * ata_dev_classify - determine device type based on ATA-spec signature
395 * @tf: ATA taskfile register set for device to be identified
397 * Determine from taskfile register contents whether a device is
398 * ATA or ATAPI, as per "Signature and persistence" section
399 * of ATA/PI spec (volume 1, sect 5.14).
405 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN
406 * the event of failure.
409 unsigned int ata_dev_classify(const struct ata_taskfile *tf)
411 /* Apple's open source Darwin code hints that some devices only
412 * put a proper signature into the LBA mid/high registers,
413 * So, we only check those. It's sufficient for uniqueness.
416 if (((tf->lbam == 0) && (tf->lbah == 0)) ||
417 ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) {
418 DPRINTK("found ATA device by sig\n");
422 if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) ||
423 ((tf->lbam == 0x69) && (tf->lbah == 0x96))) {
424 DPRINTK("found ATAPI device by sig\n");
425 return ATA_DEV_ATAPI;
428 DPRINTK("unknown device\n");
429 return ATA_DEV_UNKNOWN;
433 * ata_dev_try_classify - Parse returned ATA device signature
434 * @ap: ATA channel to examine
435 * @device: Device to examine (starting at zero)
436 * @r_err: Value of error register on completion
438 * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
439 * an ATA/ATAPI-defined set of values is placed in the ATA
440 * shadow registers, indicating the results of device detection
443 * Select the ATA device, and read the values from the ATA shadow
444 * registers. Then parse according to the Error register value,
445 * and the spec-defined values examined by ata_dev_classify().
451 * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
455 ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
457 struct ata_taskfile tf;
461 ap->ops->dev_select(ap, device);
463 memset(&tf, 0, sizeof(tf));
465 ap->ops->tf_read(ap, &tf);
470 /* see if device passed diags */
473 else if ((device == 0) && (err == 0x81))
478 /* determine if device is ATA or ATAPI */
479 class = ata_dev_classify(&tf);
481 if (class == ATA_DEV_UNKNOWN)
483 if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
489 * ata_dev_id_string - Convert IDENTIFY DEVICE page into string
490 * @id: IDENTIFY DEVICE results we will examine
491 * @s: string into which data is output
492 * @ofs: offset into identify device page
493 * @len: length of string to return. must be an even number.
495 * The strings in the IDENTIFY DEVICE page are broken up into
496 * 16-bit chunks. Run through the string, and output each
497 * 8-bit chunk linearly, regardless of platform.
503 void ata_dev_id_string(const u16 *id, unsigned char *s,
504 unsigned int ofs, unsigned int len)
523 * ata_dev_id_c_string - Convert IDENTIFY DEVICE page into C string
524 * @id: IDENTIFY DEVICE results we will examine
525 * @s: string into which data is output
526 * @ofs: offset into identify device page
527 * @len: length of string to return. must be an odd number.
529 * This function is identical to ata_dev_id_string except that it
530 * trims trailing spaces and terminates the resulting string with
531 * null. @len must be actual maximum length (even number) + 1.
536 void ata_dev_id_c_string(const u16 *id, unsigned char *s,
537 unsigned int ofs, unsigned int len)
543 ata_dev_id_string(id, s, ofs, len - 1);
545 p = s + strnlen(s, len - 1);
546 while (p > s && p[-1] == ' ')
551 static u64 ata_id_n_sectors(const u16 *id)
553 if (ata_id_has_lba(id)) {
554 if (ata_id_has_lba48(id))
555 return ata_id_u64(id, 100);
557 return ata_id_u32(id, 60);
559 if (ata_id_current_chs_valid(id))
560 return ata_id_u32(id, 57);
562 return id[1] * id[3] * id[6];
567 * ata_noop_dev_select - Select device 0/1 on ATA bus
568 * @ap: ATA channel to manipulate
569 * @device: ATA device (numbered from zero) to select
571 * This function performs no actual function.
573 * May be used as the dev_select() entry in ata_port_operations.
578 void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
584 * ata_std_dev_select - Select device 0/1 on ATA bus
585 * @ap: ATA channel to manipulate
586 * @device: ATA device (numbered from zero) to select
588 * Use the method defined in the ATA specification to
589 * make either device 0, or device 1, active on the
590 * ATA channel. Works with both PIO and MMIO.
592 * May be used as the dev_select() entry in ata_port_operations.
598 void ata_std_dev_select (struct ata_port *ap, unsigned int device)
603 tmp = ATA_DEVICE_OBS;
605 tmp = ATA_DEVICE_OBS | ATA_DEV1;
607 if (ap->flags & ATA_FLAG_MMIO) {
608 writeb(tmp, (void __iomem *) ap->ioaddr.device_addr);
610 outb(tmp, ap->ioaddr.device_addr);
612 ata_pause(ap); /* needed; also flushes, for mmio */
616 * ata_dev_select - Select device 0/1 on ATA bus
617 * @ap: ATA channel to manipulate
618 * @device: ATA device (numbered from zero) to select
619 * @wait: non-zero to wait for Status register BSY bit to clear
620 * @can_sleep: non-zero if context allows sleeping
622 * Use the method defined in the ATA specification to
623 * make either device 0, or device 1, active on the
626 * This is a high-level version of ata_std_dev_select(),
627 * which additionally provides the services of inserting
628 * the proper pauses and status polling, where needed.
634 void ata_dev_select(struct ata_port *ap, unsigned int device,
635 unsigned int wait, unsigned int can_sleep)
637 VPRINTK("ENTER, ata%u: device %u, wait %u\n",
638 ap->id, device, wait);
643 ap->ops->dev_select(ap, device);
646 if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI)
653 * ata_dump_id - IDENTIFY DEVICE info debugging output
654 * @dev: Device whose IDENTIFY DEVICE page we will dump
656 * Dump selected 16-bit words from a detected device's
657 * IDENTIFY PAGE page.
663 static inline void ata_dump_id(const struct ata_device *dev)
665 DPRINTK("49==0x%04x "
675 DPRINTK("80==0x%04x "
685 DPRINTK("88==0x%04x "
692 * Compute the PIO modes available for this device. This is not as
693 * trivial as it seems if we must consider early devices correctly.
695 * FIXME: pre IDE drive timing (do we care ?).
698 static unsigned int ata_pio_modes(const struct ata_device *adev)
702 /* Usual case. Word 53 indicates word 64 is valid */
703 if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
704 modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
710 /* If word 64 isn't valid then Word 51 high byte holds the PIO timing
711 number for the maximum. Turn it into a mask and return it */
712 modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ;
714 /* But wait.. there's more. Design your standards by committee and
715 you too can get a free iordy field to process. However its the
716 speeds not the modes that are supported... Note drivers using the
717 timing API will get this right anyway */
721 ata_queue_packet_task(struct ata_port *ap)
723 if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
724 queue_work(ata_wq, &ap->packet_task);
728 ata_queue_pio_task(struct ata_port *ap)
730 if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
731 queue_work(ata_wq, &ap->pio_task);
735 ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay)
737 if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
738 queue_delayed_work(ata_wq, &ap->pio_task, delay);
742 * ata_flush_pio_tasks - Flush pio_task and packet_task
743 * @ap: the target ata_port
745 * After this function completes, pio_task and packet_task are
746 * guranteed not to be running or scheduled.
749 * Kernel thread context (may sleep)
752 static void ata_flush_pio_tasks(struct ata_port *ap)
759 spin_lock_irqsave(&ap->host_set->lock, flags);
760 ap->flags |= ATA_FLAG_FLUSH_PIO_TASK;
761 spin_unlock_irqrestore(&ap->host_set->lock, flags);
763 DPRINTK("flush #1\n");
764 flush_workqueue(ata_wq);
767 * At this point, if a task is running, it's guaranteed to see
768 * the FLUSH flag; thus, it will never queue pio tasks again.
771 tmp |= cancel_delayed_work(&ap->pio_task);
772 tmp |= cancel_delayed_work(&ap->packet_task);
774 DPRINTK("flush #2\n");
775 flush_workqueue(ata_wq);
778 spin_lock_irqsave(&ap->host_set->lock, flags);
779 ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK;
780 spin_unlock_irqrestore(&ap->host_set->lock, flags);
785 void ata_qc_complete_internal(struct ata_queued_cmd *qc)
787 struct completion *waiting = qc->private_data;
789 qc->ap->ops->tf_read(qc->ap, &qc->tf);
794 * ata_exec_internal - execute libata internal command
795 * @ap: Port to which the command is sent
796 * @dev: Device to which the command is sent
797 * @tf: Taskfile registers for the command and the result
798 * @dma_dir: Data tranfer direction of the command
799 * @buf: Data buffer of the command
800 * @buflen: Length of data buffer
802 * Executes libata internal command with timeout. @tf contains
803 * command on entry and result on return. Timeout and error
804 * conditions are reported via return value. No recovery action
805 * is taken after a command times out. It's caller's duty to
806 * clean up after timeout.
809 * None. Should be called with kernel context, might sleep.
813 ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
814 struct ata_taskfile *tf,
815 int dma_dir, void *buf, unsigned int buflen)
817 u8 command = tf->command;
818 struct ata_queued_cmd *qc;
819 DECLARE_COMPLETION(wait);
821 unsigned int err_mask;
823 spin_lock_irqsave(&ap->host_set->lock, flags);
825 qc = ata_qc_new_init(ap, dev);
829 qc->dma_dir = dma_dir;
830 if (dma_dir != DMA_NONE) {
831 ata_sg_init_one(qc, buf, buflen);
832 qc->nsect = buflen / ATA_SECT_SIZE;
835 qc->private_data = &wait;
836 qc->complete_fn = ata_qc_complete_internal;
838 qc->err_mask = ata_qc_issue(qc);
842 spin_unlock_irqrestore(&ap->host_set->lock, flags);
844 if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) {
845 spin_lock_irqsave(&ap->host_set->lock, flags);
847 /* We're racing with irq here. If we lose, the
848 * following test prevents us from completing the qc
849 * again. If completion irq occurs after here but
850 * before the caller cleans up, it will result in a
851 * spurious interrupt. We can live with that.
853 if (qc->flags & ATA_QCFLAG_ACTIVE) {
854 qc->err_mask = AC_ERR_TIMEOUT;
856 printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n",
860 spin_unlock_irqrestore(&ap->host_set->lock, flags);
864 err_mask = qc->err_mask;
872 * ata_pio_need_iordy - check if iordy needed
875 * Check if the current speed of the device requires IORDY. Used
876 * by various controllers for chip configuration.
879 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
882 int speed = adev->pio_mode - XFER_PIO_0;
889 /* If we have no drive specific rule, then PIO 2 is non IORDY */
891 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
892 pio = adev->id[ATA_ID_EIDE_PIO];
893 /* Is the speed faster than the drive allows non IORDY ? */
895 /* This is cycle times not frequency - watch the logic! */
896 if (pio > 240) /* PIO2 is 240nS per cycle */
905 * ata_dev_identify - obtain IDENTIFY x DEVICE page
906 * @ap: port on which device we wish to probe resides
907 * @device: device bus address, starting at zero
909 * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE
910 * command, and read back the 512-byte device information page.
911 * The device information page is fed to us via the standard
912 * PIO-IN protocol, but we hand-code it here. (TODO: investigate
913 * using standard PIO-IN paths)
915 * After reading the device information page, we use several
916 * bits of information from it to initialize data structures
917 * that will be used during the lifetime of the ata_device.
918 * Other data from the info page is used to disqualify certain
919 * older ATA devices we do not wish to support.
922 * Inherited from caller. Some functions called by this function
923 * obtain the host_set lock.
926 static void ata_dev_identify(struct ata_port *ap, unsigned int device)
928 struct ata_device *dev = &ap->device[device];
929 unsigned int major_version;
931 unsigned long xfer_modes;
932 unsigned int using_edd;
933 struct ata_taskfile tf;
934 unsigned int err_mask;
937 if (!ata_dev_present(dev)) {
938 DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
943 if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
948 DPRINTK("ENTER, host %u, dev %u\n", ap->id, device);
950 WARN_ON(dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ATAPI &&
951 dev->class != ATA_DEV_NONE);
953 ata_dev_select(ap, device, 1, 1); /* select device 0/1 */
956 ata_tf_init(ap, &tf, device);
958 if (dev->class == ATA_DEV_ATA) {
959 tf.command = ATA_CMD_ID_ATA;
960 DPRINTK("do ATA identify\n");
962 tf.command = ATA_CMD_ID_ATAPI;
963 DPRINTK("do ATAPI identify\n");
966 tf.protocol = ATA_PROT_PIO;
968 err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
969 dev->id, sizeof(dev->id));
972 if (err_mask & ~AC_ERR_DEV)
976 * arg! EDD works for all test cases, but seems to return
977 * the ATA signature for some ATAPI devices. Until the
978 * reason for this is found and fixed, we fix up the mess
979 * here. If IDENTIFY DEVICE returns command aborted
980 * (as ATAPI devices do), then we issue an
981 * IDENTIFY PACKET DEVICE.
983 * ATA software reset (SRST, the default) does not appear
984 * to have this problem.
986 if ((using_edd) && (dev->class == ATA_DEV_ATA)) {
988 if (err & ATA_ABORTED) {
989 dev->class = ATA_DEV_ATAPI;
996 swap_buf_le16(dev->id, ATA_ID_WORDS);
998 /* print device capabilities */
999 printk(KERN_DEBUG "ata%u: dev %u cfg "
1000 "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
1001 ap->id, device, dev->id[49],
1002 dev->id[82], dev->id[83], dev->id[84],
1003 dev->id[85], dev->id[86], dev->id[87],
1007 * common ATA, ATAPI feature tests
1010 /* we require DMA support (bits 8 of word 49) */
1011 if (!ata_id_has_dma(dev->id)) {
1012 printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
1016 /* quick-n-dirty find max transfer mode; for printk only */
1017 xfer_modes = dev->id[ATA_ID_UDMA_MODES];
1019 xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
1021 xfer_modes = ata_pio_modes(dev);
1025 /* ATA-specific feature tests */
1026 if (dev->class == ATA_DEV_ATA) {
1027 dev->n_sectors = ata_id_n_sectors(dev->id);
1029 if (!ata_id_is_ata(dev->id)) /* sanity check */
1032 /* get major version */
1033 tmp = dev->id[ATA_ID_MAJOR_VER];
1034 for (major_version = 14; major_version >= 1; major_version--)
1035 if (tmp & (1 << major_version))
1039 * The exact sequence expected by certain pre-ATA4 drives is:
1042 * INITIALIZE DEVICE PARAMETERS
1044 * Some drives were very specific about that exact sequence.
1046 if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
1047 ata_dev_init_params(ap, dev);
1049 /* current CHS translation info (id[53-58]) might be
1050 * changed. reread the identify device info.
1052 ata_dev_reread_id(ap, dev);
1055 if (ata_id_has_lba(dev->id)) {
1056 dev->flags |= ATA_DFLAG_LBA;
1058 if (ata_id_has_lba48(dev->id))
1059 dev->flags |= ATA_DFLAG_LBA48;
1061 /* print device info to dmesg */
1062 printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
1065 ata_mode_string(xfer_modes),
1066 (unsigned long long)dev->n_sectors,
1067 dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA");
1071 /* Default translation */
1072 dev->cylinders = dev->id[1];
1073 dev->heads = dev->id[3];
1074 dev->sectors = dev->id[6];
1076 if (ata_id_current_chs_valid(dev->id)) {
1077 /* Current CHS translation is valid. */
1078 dev->cylinders = dev->id[54];
1079 dev->heads = dev->id[55];
1080 dev->sectors = dev->id[56];
1083 /* print device info to dmesg */
1084 printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n",
1087 ata_mode_string(xfer_modes),
1088 (unsigned long long)dev->n_sectors,
1089 (int)dev->cylinders, (int)dev->heads, (int)dev->sectors);
1093 ap->host->max_cmd_len = 16;
1096 /* ATAPI-specific feature tests */
1097 else if (dev->class == ATA_DEV_ATAPI) {
1098 if (ata_id_is_ata(dev->id)) /* sanity check */
1101 rc = atapi_cdb_len(dev->id);
1102 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
1103 printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
1106 ap->cdb_len = (unsigned int) rc;
1107 ap->host->max_cmd_len = (unsigned char) ap->cdb_len;
1109 /* print device info to dmesg */
1110 printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
1112 ata_mode_string(xfer_modes));
1115 DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
1119 printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
1122 dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */
1123 DPRINTK("EXIT, err\n");
1127 static inline u8 ata_dev_knobble(const struct ata_port *ap)
1129 return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
1133 * ata_dev_config - Run device specific handlers & check for SATA->PATA bridges
1140 void ata_dev_config(struct ata_port *ap, unsigned int i)
1142 /* limit bridge transfers to udma5, 200 sectors */
1143 if (ata_dev_knobble(ap)) {
1144 printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
1145 ap->id, ap->device->devno);
1146 ap->udma_mask &= ATA_UDMA5;
1147 ap->host->max_sectors = ATA_MAX_SECTORS;
1148 ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
1149 ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS;
1152 if (ap->ops->dev_config)
1153 ap->ops->dev_config(ap, &ap->device[i]);
1157 * ata_bus_probe - Reset and probe ATA bus
1160 * Master ATA bus probing function. Initiates a hardware-dependent
1161 * bus reset, then attempts to identify any devices found on
1165 * PCI/etc. bus probe sem.
1168 * Zero on success, non-zero on error.
1171 static int ata_bus_probe(struct ata_port *ap)
1173 unsigned int i, found = 0;
1175 if (ap->ops->probe_reset) {
1176 unsigned int classes[ATA_MAX_DEVICES];
1181 rc = ap->ops->probe_reset(ap, classes);
1183 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1184 if (classes[i] == ATA_DEV_UNKNOWN)
1185 classes[i] = ATA_DEV_NONE;
1186 ap->device[i].class = classes[i];
1189 printk(KERN_ERR "ata%u: probe reset failed, "
1190 "disabling port\n", ap->id);
1191 ata_port_disable(ap);
1194 ap->ops->phy_reset(ap);
1196 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1199 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1200 ata_dev_identify(ap, i);
1201 if (ata_dev_present(&ap->device[i])) {
1203 ata_dev_config(ap,i);
1207 if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED))
1208 goto err_out_disable;
1211 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1212 goto err_out_disable;
1217 ap->ops->port_disable(ap);
1223 * ata_port_probe - Mark port as enabled
1224 * @ap: Port for which we indicate enablement
1226 * Modify @ap data structure such that the system
1227 * thinks that the entire port is enabled.
1229 * LOCKING: host_set lock, or some other form of
1233 void ata_port_probe(struct ata_port *ap)
1235 ap->flags &= ~ATA_FLAG_PORT_DISABLED;
1239 * sata_print_link_status - Print SATA link status
1240 * @ap: SATA port to printk link status about
1242 * This function prints link speed and status of a SATA link.
1247 static void sata_print_link_status(struct ata_port *ap)
1252 if (!ap->ops->scr_read)
1255 sstatus = scr_read(ap, SCR_STATUS);
1257 if (sata_dev_present(ap)) {
1258 tmp = (sstatus >> 4) & 0xf;
1261 else if (tmp & (1 << 1))
1264 speed = "<unknown>";
1265 printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
1266 ap->id, speed, sstatus);
1268 printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
1274 * __sata_phy_reset - Wake/reset a low-level SATA PHY
1275 * @ap: SATA port associated with target SATA PHY.
1277 * This function issues commands to standard SATA Sxxx
1278 * PHY registers, to wake up the phy (and device), and
1279 * clear any reset condition.
1282 * PCI/etc. bus probe sem.
1285 void __sata_phy_reset(struct ata_port *ap)
1288 unsigned long timeout = jiffies + (HZ * 5);
1290 if (ap->flags & ATA_FLAG_SATA_RESET) {
1291 /* issue phy wake/reset */
1292 scr_write_flush(ap, SCR_CONTROL, 0x301);
1293 /* Couldn't find anything in SATA I/II specs, but
1294 * AHCI-1.1 10.4.2 says at least 1 ms. */
1297 scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
1299 /* wait for phy to become ready, if necessary */
1302 sstatus = scr_read(ap, SCR_STATUS);
1303 if ((sstatus & 0xf) != 1)
1305 } while (time_before(jiffies, timeout));
1307 /* print link status */
1308 sata_print_link_status(ap);
1310 /* TODO: phy layer with polling, timeouts, etc. */
1311 if (sata_dev_present(ap))
1314 ata_port_disable(ap);
1316 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1319 if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
1320 ata_port_disable(ap);
1324 ap->cbl = ATA_CBL_SATA;
1328 * sata_phy_reset - Reset SATA bus.
1329 * @ap: SATA port associated with target SATA PHY.
1331 * This function resets the SATA bus, and then probes
1332 * the bus for devices.
1335 * PCI/etc. bus probe sem.
1338 void sata_phy_reset(struct ata_port *ap)
1340 __sata_phy_reset(ap);
1341 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1347 * ata_port_disable - Disable port.
1348 * @ap: Port to be disabled.
1350 * Modify @ap data structure such that the system
1351 * thinks that the entire port is disabled, and should
1352 * never attempt to probe or communicate with devices
1355 * LOCKING: host_set lock, or some other form of
1359 void ata_port_disable(struct ata_port *ap)
1361 ap->device[0].class = ATA_DEV_NONE;
1362 ap->device[1].class = ATA_DEV_NONE;
1363 ap->flags |= ATA_FLAG_PORT_DISABLED;
1367 * This mode timing computation functionality is ported over from
1368 * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
1371 * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
1372 * These were taken from ATA/ATAPI-6 standard, rev 0a, except
1373 * for PIO 5, which is a nonstandard extension and UDMA6, which
1374 * is currently supported only by Maxtor drives.
1377 static const struct ata_timing ata_timing[] = {
1379 { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
1380 { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
1381 { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
1382 { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
1384 { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
1385 { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
1386 { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
1388 /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
1390 { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
1391 { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
1392 { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
1394 { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
1395 { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
1396 { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
1398 /* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
1399 { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
1400 { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
1402 { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
1403 { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
1404 { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
1406 /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
1411 #define ENOUGH(v,unit) (((v)-1)/(unit)+1)
1412 #define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
1414 static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
1416 q->setup = EZ(t->setup * 1000, T);
1417 q->act8b = EZ(t->act8b * 1000, T);
1418 q->rec8b = EZ(t->rec8b * 1000, T);
1419 q->cyc8b = EZ(t->cyc8b * 1000, T);
1420 q->active = EZ(t->active * 1000, T);
1421 q->recover = EZ(t->recover * 1000, T);
1422 q->cycle = EZ(t->cycle * 1000, T);
1423 q->udma = EZ(t->udma * 1000, UT);
1426 void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
1427 struct ata_timing *m, unsigned int what)
1429 if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
1430 if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
1431 if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
1432 if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
1433 if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
1434 if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
1435 if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
1436 if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
1439 static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
1441 const struct ata_timing *t;
1443 for (t = ata_timing; t->mode != speed; t++)
1444 if (t->mode == 0xFF)
1449 int ata_timing_compute(struct ata_device *adev, unsigned short speed,
1450 struct ata_timing *t, int T, int UT)
1452 const struct ata_timing *s;
1453 struct ata_timing p;
1459 if (!(s = ata_timing_find_mode(speed)))
1462 memcpy(t, s, sizeof(*s));
1465 * If the drive is an EIDE drive, it can tell us it needs extended
1466 * PIO/MW_DMA cycle timing.
1469 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
1470 memset(&p, 0, sizeof(p));
1471 if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
1472 if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
1473 else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
1474 } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
1475 p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
1477 ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
1481 * Convert the timing to bus clock counts.
1484 ata_timing_quantize(t, t, T, UT);
1487 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
1488 * S.M.A.R.T * and some other commands. We have to ensure that the
1489 * DMA cycle timing is slower/equal than the fastest PIO timing.
1492 if (speed > XFER_PIO_4) {
1493 ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
1494 ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
1498 * Lengthen active & recovery time so that cycle time is correct.
1501 if (t->act8b + t->rec8b < t->cyc8b) {
1502 t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
1503 t->rec8b = t->cyc8b - t->act8b;
1506 if (t->active + t->recover < t->cycle) {
1507 t->active += (t->cycle - (t->active + t->recover)) / 2;
1508 t->recover = t->cycle - t->active;
1514 static const struct {
1517 } xfer_mode_classes[] = {
1518 { ATA_SHIFT_UDMA, XFER_UDMA_0 },
1519 { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 },
1520 { ATA_SHIFT_PIO, XFER_PIO_0 },
1523 static u8 base_from_shift(unsigned int shift)
1527 for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++)
1528 if (xfer_mode_classes[i].shift == shift)
1529 return xfer_mode_classes[i].base;
1534 static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
1539 if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
1542 if (dev->xfer_shift == ATA_SHIFT_PIO)
1543 dev->flags |= ATA_DFLAG_PIO;
1545 ata_dev_set_xfermode(ap, dev);
1547 base = base_from_shift(dev->xfer_shift);
1548 ofs = dev->xfer_mode - base;
1549 idx = ofs + dev->xfer_shift;
1550 WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str));
1552 DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n",
1553 idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs);
1555 printk(KERN_INFO "ata%u: dev %u configured for %s\n",
1556 ap->id, dev->devno, xfer_mode_str[idx]);
1559 static int ata_host_set_pio(struct ata_port *ap)
1565 mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO);
1568 printk(KERN_WARNING "ata%u: no PIO support\n", ap->id);
1572 base = base_from_shift(ATA_SHIFT_PIO);
1573 xfer_mode = base + x;
1575 DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n",
1576 (int)base, (int)xfer_mode, mask, x);
1578 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1579 struct ata_device *dev = &ap->device[i];
1580 if (ata_dev_present(dev)) {
1581 dev->pio_mode = xfer_mode;
1582 dev->xfer_mode = xfer_mode;
1583 dev->xfer_shift = ATA_SHIFT_PIO;
1584 if (ap->ops->set_piomode)
1585 ap->ops->set_piomode(ap, dev);
1592 static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
1593 unsigned int xfer_shift)
1597 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1598 struct ata_device *dev = &ap->device[i];
1599 if (ata_dev_present(dev)) {
1600 dev->dma_mode = xfer_mode;
1601 dev->xfer_mode = xfer_mode;
1602 dev->xfer_shift = xfer_shift;
1603 if (ap->ops->set_dmamode)
1604 ap->ops->set_dmamode(ap, dev);
1610 * ata_set_mode - Program timings and issue SET FEATURES - XFER
1611 * @ap: port on which timings will be programmed
1613 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
1616 * PCI/etc. bus probe sem.
1618 static void ata_set_mode(struct ata_port *ap)
1620 unsigned int xfer_shift;
1624 /* step 1: always set host PIO timings */
1625 rc = ata_host_set_pio(ap);
1629 /* step 2: choose the best data xfer mode */
1630 xfer_mode = xfer_shift = 0;
1631 rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift);
1635 /* step 3: if that xfer mode isn't PIO, set host DMA timings */
1636 if (xfer_shift != ATA_SHIFT_PIO)
1637 ata_host_set_dma(ap, xfer_mode, xfer_shift);
1639 /* step 4: update devices' xfer mode */
1640 ata_dev_set_mode(ap, &ap->device[0]);
1641 ata_dev_set_mode(ap, &ap->device[1]);
1643 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1646 if (ap->ops->post_set_mode)
1647 ap->ops->post_set_mode(ap);
1652 ata_port_disable(ap);
1656 * ata_tf_to_host - issue ATA taskfile to host controller
1657 * @ap: port to which command is being issued
1658 * @tf: ATA taskfile register set
1660 * Issues ATA taskfile register set to ATA host controller,
1661 * with proper synchronization with interrupt handler and
1665 * spin_lock_irqsave(host_set lock)
1668 static inline void ata_tf_to_host(struct ata_port *ap,
1669 const struct ata_taskfile *tf)
1671 ap->ops->tf_load(ap, tf);
1672 ap->ops->exec_command(ap, tf);
1676 * ata_busy_sleep - sleep until BSY clears, or timeout
1677 * @ap: port containing status register to be polled
1678 * @tmout_pat: impatience timeout
1679 * @tmout: overall timeout
1681 * Sleep until ATA Status register bit BSY clears,
1682 * or a timeout occurs.
1687 unsigned int ata_busy_sleep (struct ata_port *ap,
1688 unsigned long tmout_pat, unsigned long tmout)
1690 unsigned long timer_start, timeout;
1693 status = ata_busy_wait(ap, ATA_BUSY, 300);
1694 timer_start = jiffies;
1695 timeout = timer_start + tmout_pat;
1696 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1698 status = ata_busy_wait(ap, ATA_BUSY, 3);
1701 if (status & ATA_BUSY)
1702 printk(KERN_WARNING "ata%u is slow to respond, "
1703 "please be patient\n", ap->id);
1705 timeout = timer_start + tmout;
1706 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1708 status = ata_chk_status(ap);
1711 if (status & ATA_BUSY) {
1712 printk(KERN_ERR "ata%u failed to respond (%lu secs)\n",
1713 ap->id, tmout / HZ);
1720 static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
1722 struct ata_ioports *ioaddr = &ap->ioaddr;
1723 unsigned int dev0 = devmask & (1 << 0);
1724 unsigned int dev1 = devmask & (1 << 1);
1725 unsigned long timeout;
1727 /* if device 0 was found in ata_devchk, wait for its
1731 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1733 /* if device 1 was found in ata_devchk, wait for
1734 * register access, then wait for BSY to clear
1736 timeout = jiffies + ATA_TMOUT_BOOT;
1740 ap->ops->dev_select(ap, 1);
1741 if (ap->flags & ATA_FLAG_MMIO) {
1742 nsect = readb((void __iomem *) ioaddr->nsect_addr);
1743 lbal = readb((void __iomem *) ioaddr->lbal_addr);
1745 nsect = inb(ioaddr->nsect_addr);
1746 lbal = inb(ioaddr->lbal_addr);
1748 if ((nsect == 1) && (lbal == 1))
1750 if (time_after(jiffies, timeout)) {
1754 msleep(50); /* give drive a breather */
1757 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1759 /* is all this really necessary? */
1760 ap->ops->dev_select(ap, 0);
1762 ap->ops->dev_select(ap, 1);
1764 ap->ops->dev_select(ap, 0);
1768 * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
1769 * @ap: Port to reset and probe
1771 * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
1772 * probe the bus. Not often used these days.
1775 * PCI/etc. bus probe sem.
1776 * Obtains host_set lock.
1780 static unsigned int ata_bus_edd(struct ata_port *ap)
1782 struct ata_taskfile tf;
1783 unsigned long flags;
1785 /* set up execute-device-diag (bus reset) taskfile */
1786 /* also, take interrupts to a known state (disabled) */
1787 DPRINTK("execute-device-diag\n");
1788 ata_tf_init(ap, &tf, 0);
1790 tf.command = ATA_CMD_EDD;
1791 tf.protocol = ATA_PROT_NODATA;
1794 spin_lock_irqsave(&ap->host_set->lock, flags);
1795 ata_tf_to_host(ap, &tf);
1796 spin_unlock_irqrestore(&ap->host_set->lock, flags);
1798 /* spec says at least 2ms. but who knows with those
1799 * crazy ATAPI devices...
1803 return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1806 static unsigned int ata_bus_softreset(struct ata_port *ap,
1807 unsigned int devmask)
1809 struct ata_ioports *ioaddr = &ap->ioaddr;
1811 DPRINTK("ata%u: bus reset via SRST\n", ap->id);
1813 /* software reset. causes dev0 to be selected */
1814 if (ap->flags & ATA_FLAG_MMIO) {
1815 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1816 udelay(20); /* FIXME: flush */
1817 writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr);
1818 udelay(20); /* FIXME: flush */
1819 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1821 outb(ap->ctl, ioaddr->ctl_addr);
1823 outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
1825 outb(ap->ctl, ioaddr->ctl_addr);
1828 /* spec mandates ">= 2ms" before checking status.
1829 * We wait 150ms, because that was the magic delay used for
1830 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
1831 * between when the ATA command register is written, and then
1832 * status is checked. Because waiting for "a while" before
1833 * checking status is fine, post SRST, we perform this magic
1834 * delay here as well.
1838 ata_bus_post_reset(ap, devmask);
1844 * ata_bus_reset - reset host port and associated ATA channel
1845 * @ap: port to reset
1847 * This is typically the first time we actually start issuing
1848 * commands to the ATA channel. We wait for BSY to clear, then
1849 * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
1850 * result. Determine what devices, if any, are on the channel
1851 * by looking at the device 0/1 error register. Look at the signature
1852 * stored in each device's taskfile registers, to determine if
1853 * the device is ATA or ATAPI.
1856 * PCI/etc. bus probe sem.
1857 * Obtains host_set lock.
1860 * Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
1863 void ata_bus_reset(struct ata_port *ap)
1865 struct ata_ioports *ioaddr = &ap->ioaddr;
1866 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
1868 unsigned int dev0, dev1 = 0, rc = 0, devmask = 0;
1870 DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
1872 /* determine if device 0/1 are present */
1873 if (ap->flags & ATA_FLAG_SATA_RESET)
1876 dev0 = ata_devchk(ap, 0);
1878 dev1 = ata_devchk(ap, 1);
1882 devmask |= (1 << 0);
1884 devmask |= (1 << 1);
1886 /* select device 0 again */
1887 ap->ops->dev_select(ap, 0);
1889 /* issue bus reset */
1890 if (ap->flags & ATA_FLAG_SRST)
1891 rc = ata_bus_softreset(ap, devmask);
1892 else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
1893 /* set up device control */
1894 if (ap->flags & ATA_FLAG_MMIO)
1895 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1897 outb(ap->ctl, ioaddr->ctl_addr);
1898 rc = ata_bus_edd(ap);
1905 * determine by signature whether we have ATA or ATAPI devices
1907 ap->device[0].class = ata_dev_try_classify(ap, 0, &err);
1908 if ((slave_possible) && (err != 0x81))
1909 ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
1911 /* re-enable interrupts */
1912 if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
1915 /* is double-select really necessary? */
1916 if (ap->device[1].class != ATA_DEV_NONE)
1917 ap->ops->dev_select(ap, 1);
1918 if (ap->device[0].class != ATA_DEV_NONE)
1919 ap->ops->dev_select(ap, 0);
1921 /* if no devices were detected, disable this port */
1922 if ((ap->device[0].class == ATA_DEV_NONE) &&
1923 (ap->device[1].class == ATA_DEV_NONE))
1926 if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
1927 /* set up device control for ATA_FLAG_SATA_RESET */
1928 if (ap->flags & ATA_FLAG_MMIO)
1929 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1931 outb(ap->ctl, ioaddr->ctl_addr);
1938 printk(KERN_ERR "ata%u: disabling port\n", ap->id);
1939 ap->ops->port_disable(ap);
1944 static int sata_phy_resume(struct ata_port *ap)
1946 unsigned long timeout = jiffies + (HZ * 5);
1949 scr_write_flush(ap, SCR_CONTROL, 0x300);
1951 /* Wait for phy to become ready, if necessary. */
1954 sstatus = scr_read(ap, SCR_STATUS);
1955 if ((sstatus & 0xf) != 1)
1957 } while (time_before(jiffies, timeout));
1963 * ata_std_probeinit - initialize probing
1964 * @ap: port to be probed
1966 * @ap is about to be probed. Initialize it. This function is
1967 * to be used as standard callback for ata_drive_probe_reset().
1969 * NOTE!!! Do not use this function as probeinit if a low level
1970 * driver implements only hardreset. Just pass NULL as probeinit
1971 * in that case. Using this function is probably okay but doing
1972 * so makes reset sequence different from the original
1973 * ->phy_reset implementation and Jeff nervous. :-P
1975 extern void ata_std_probeinit(struct ata_port *ap)
1977 if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
1978 sata_phy_resume(ap);
1979 if (sata_dev_present(ap))
1980 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1985 * ata_std_softreset - reset host port via ATA SRST
1986 * @ap: port to reset
1987 * @verbose: fail verbosely
1988 * @classes: resulting classes of attached devices
1990 * Reset host port using ATA SRST. This function is to be used
1991 * as standard callback for ata_drive_*_reset() functions.
1994 * Kernel thread context (may sleep)
1997 * 0 on success, -errno otherwise.
1999 int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
2001 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
2002 unsigned int devmask = 0, err_mask;
2007 if (ap->ops->scr_read && !sata_dev_present(ap)) {
2008 classes[0] = ATA_DEV_NONE;
2012 /* determine if device 0/1 are present */
2013 if (ata_devchk(ap, 0))
2014 devmask |= (1 << 0);
2015 if (slave_possible && ata_devchk(ap, 1))
2016 devmask |= (1 << 1);
2018 /* select device 0 again */
2019 ap->ops->dev_select(ap, 0);
2021 /* issue bus reset */
2022 DPRINTK("about to softreset, devmask=%x\n", devmask);
2023 err_mask = ata_bus_softreset(ap, devmask);
2026 printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
2029 DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
2034 /* determine by signature whether we have ATA or ATAPI devices */
2035 classes[0] = ata_dev_try_classify(ap, 0, &err);
2036 if (slave_possible && err != 0x81)
2037 classes[1] = ata_dev_try_classify(ap, 1, &err);
2040 DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
2045 * sata_std_hardreset - reset host port via SATA phy reset
2046 * @ap: port to reset
2047 * @verbose: fail verbosely
2048 * @class: resulting class of attached device
2050 * SATA phy-reset host port using DET bits of SControl register.
2051 * This function is to be used as standard callback for
2052 * ata_drive_*_reset().
2055 * Kernel thread context (may sleep)
2058 * 0 on success, -errno otherwise.
2060 int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
2064 /* Issue phy wake/reset */
2065 scr_write_flush(ap, SCR_CONTROL, 0x301);
2068 * Couldn't find anything in SATA I/II specs, but AHCI-1.1
2069 * 10.4.2 says at least 1 ms.
2073 /* Bring phy back */
2074 sata_phy_resume(ap);
2076 /* TODO: phy layer with polling, timeouts, etc. */
2077 if (!sata_dev_present(ap)) {
2078 *class = ATA_DEV_NONE;
2079 DPRINTK("EXIT, link offline\n");
2083 if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
2085 printk(KERN_ERR "ata%u: COMRESET failed "
2086 "(device not ready)\n", ap->id);
2088 DPRINTK("EXIT, device not ready\n");
2092 ap->ops->dev_select(ap, 0); /* probably unnecessary */
2094 *class = ata_dev_try_classify(ap, 0, NULL);
2096 DPRINTK("EXIT, class=%u\n", *class);
2101 * ata_std_postreset - standard postreset callback
2102 * @ap: the target ata_port
2103 * @classes: classes of attached devices
2105 * This function is invoked after a successful reset. Note that
2106 * the device might have been reset more than once using
2107 * different reset methods before postreset is invoked.
2108 * postreset is also reponsible for setting cable type.
2110 * This function is to be used as standard callback for
2111 * ata_drive_*_reset().
2114 * Kernel thread context (may sleep)
2116 void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
2120 /* set cable type */
2121 if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
2122 ap->cbl = ATA_CBL_SATA;
2124 /* print link status */
2125 if (ap->cbl == ATA_CBL_SATA)
2126 sata_print_link_status(ap);
2128 /* re-enable interrupts */
2129 if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
2132 /* is double-select really necessary? */
2133 if (classes[0] != ATA_DEV_NONE)
2134 ap->ops->dev_select(ap, 1);
2135 if (classes[1] != ATA_DEV_NONE)
2136 ap->ops->dev_select(ap, 0);
2138 /* bail out if no device is present */
2139 if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
2140 DPRINTK("EXIT, no device\n");
2144 /* set up device control */
2145 if (ap->ioaddr.ctl_addr) {
2146 if (ap->flags & ATA_FLAG_MMIO)
2147 writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
2149 outb(ap->ctl, ap->ioaddr.ctl_addr);
2156 * ata_std_probe_reset - standard probe reset method
2157 * @ap: prot to perform probe-reset
2158 * @classes: resulting classes of attached devices
2160 * The stock off-the-shelf ->probe_reset method.
2163 * Kernel thread context (may sleep)
2166 * 0 on success, -errno otherwise.
2168 int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
2170 ata_reset_fn_t hardreset;
2173 if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
2174 hardreset = sata_std_hardreset;
2176 return ata_drive_probe_reset(ap, ata_std_probeinit,
2177 ata_std_softreset, hardreset,
2178 ata_std_postreset, classes);
2181 static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
2182 ata_postreset_fn_t postreset,
2183 unsigned int *classes)
2187 for (i = 0; i < ATA_MAX_DEVICES; i++)
2188 classes[i] = ATA_DEV_UNKNOWN;
2190 rc = reset(ap, 0, classes);
2194 /* If any class isn't ATA_DEV_UNKNOWN, consider classification
2195 * is complete and convert all ATA_DEV_UNKNOWN to
2198 for (i = 0; i < ATA_MAX_DEVICES; i++)
2199 if (classes[i] != ATA_DEV_UNKNOWN)
2202 if (i < ATA_MAX_DEVICES)
2203 for (i = 0; i < ATA_MAX_DEVICES; i++)
2204 if (classes[i] == ATA_DEV_UNKNOWN)
2205 classes[i] = ATA_DEV_NONE;
2208 postreset(ap, classes);
2210 return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV;
2214 * ata_drive_probe_reset - Perform probe reset with given methods
2215 * @ap: port to reset
2216 * @probeinit: probeinit method (can be NULL)
2217 * @softreset: softreset method (can be NULL)
2218 * @hardreset: hardreset method (can be NULL)
2219 * @postreset: postreset method (can be NULL)
2220 * @classes: resulting classes of attached devices
2222 * Reset the specified port and classify attached devices using
2223 * given methods. This function prefers softreset but tries all
2224 * possible reset sequences to reset and classify devices. This
2225 * function is intended to be used for constructing ->probe_reset
2226 * callback by low level drivers.
2228 * Reset methods should follow the following rules.
2230 * - Return 0 on sucess, -errno on failure.
2231 * - If classification is supported, fill classes[] with
2232 * recognized class codes.
2233 * - If classification is not supported, leave classes[] alone.
2234 * - If verbose is non-zero, print error message on failure;
2235 * otherwise, shut up.
2238 * Kernel thread context (may sleep)
2241 * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
2242 * if classification fails, and any error code from reset
2245 int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
2246 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
2247 ata_postreset_fn_t postreset, unsigned int *classes)
2255 rc = do_probe_reset(ap, softreset, postreset, classes);
2263 rc = do_probe_reset(ap, hardreset, postreset, classes);
2264 if (rc == 0 || rc != -ENODEV)
2268 rc = do_probe_reset(ap, softreset, postreset, classes);
2273 static void ata_pr_blacklisted(const struct ata_port *ap,
2274 const struct ata_device *dev)
2276 printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
2277 ap->id, dev->devno);
2280 static const char * const ata_dma_blacklist [] = {
2299 "Toshiba CD-ROM XM-6202B",
2300 "TOSHIBA CD-ROM XM-1702BC",
2302 "E-IDE CD-ROM CR-840",
2305 "SAMSUNG CD-ROM SC-148C",
2306 "SAMSUNG CD-ROM SC",
2308 "ATAPI CD-ROM DRIVE 40X MAXIMUM",
2312 static int ata_dma_blacklisted(const struct ata_device *dev)
2314 unsigned char model_num[41];
2317 ata_dev_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS,
2320 for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
2321 if (!strcmp(ata_dma_blacklist[i], model_num))
2327 static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
2329 const struct ata_device *master, *slave;
2332 master = &ap->device[0];
2333 slave = &ap->device[1];
2335 WARN_ON(!ata_dev_present(master) && !ata_dev_present(slave));
2337 if (shift == ATA_SHIFT_UDMA) {
2338 mask = ap->udma_mask;
2339 if (ata_dev_present(master)) {
2340 mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
2341 if (ata_dma_blacklisted(master)) {
2343 ata_pr_blacklisted(ap, master);
2346 if (ata_dev_present(slave)) {
2347 mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
2348 if (ata_dma_blacklisted(slave)) {
2350 ata_pr_blacklisted(ap, slave);
2354 else if (shift == ATA_SHIFT_MWDMA) {
2355 mask = ap->mwdma_mask;
2356 if (ata_dev_present(master)) {
2357 mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
2358 if (ata_dma_blacklisted(master)) {
2360 ata_pr_blacklisted(ap, master);
2363 if (ata_dev_present(slave)) {
2364 mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
2365 if (ata_dma_blacklisted(slave)) {
2367 ata_pr_blacklisted(ap, slave);
2371 else if (shift == ATA_SHIFT_PIO) {
2372 mask = ap->pio_mask;
2373 if (ata_dev_present(master)) {
2374 /* spec doesn't return explicit support for
2375 * PIO0-2, so we fake it
2377 u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03;
2382 if (ata_dev_present(slave)) {
2383 /* spec doesn't return explicit support for
2384 * PIO0-2, so we fake it
2386 u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03;
2393 mask = 0xffffffff; /* shut up compiler warning */
2400 /* find greatest bit */
2401 static int fgb(u32 bitmap)
2406 for (i = 0; i < 32; i++)
2407 if (bitmap & (1 << i))
2414 * ata_choose_xfer_mode - attempt to find best transfer mode
2415 * @ap: Port for which an xfer mode will be selected
2416 * @xfer_mode_out: (output) SET FEATURES - XFER MODE code
2417 * @xfer_shift_out: (output) bit shift that selects this mode
2419 * Based on host and device capabilities, determine the
2420 * maximum transfer mode that is amenable to all.
2423 * PCI/etc. bus probe sem.
2426 * Zero on success, negative on error.
2429 static int ata_choose_xfer_mode(const struct ata_port *ap,
2431 unsigned int *xfer_shift_out)
2433 unsigned int mask, shift;
2436 for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) {
2437 shift = xfer_mode_classes[i].shift;
2438 mask = ata_get_mode_mask(ap, shift);
2442 *xfer_mode_out = xfer_mode_classes[i].base + x;
2443 *xfer_shift_out = shift;
2452 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
2453 * @ap: Port associated with device @dev
2454 * @dev: Device to which command will be sent
2456 * Issue SET FEATURES - XFER MODE command to device @dev
2460 * PCI/etc. bus probe sem.
2463 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
2465 struct ata_taskfile tf;
2467 /* set up set-features taskfile */
2468 DPRINTK("set features - xfer mode\n");
2470 ata_tf_init(ap, &tf, dev->devno);
2471 tf.command = ATA_CMD_SET_FEATURES;
2472 tf.feature = SETFEATURES_XFER;
2473 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2474 tf.protocol = ATA_PROT_NODATA;
2475 tf.nsect = dev->xfer_mode;
2477 if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) {
2478 printk(KERN_ERR "ata%u: failed to set xfermode, disabled\n",
2480 ata_port_disable(ap);
2487 * ata_dev_reread_id - Reread the device identify device info
2488 * @ap: port where the device is
2489 * @dev: device to reread the identify device info
2494 static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
2496 struct ata_taskfile tf;
2498 ata_tf_init(ap, &tf, dev->devno);
2500 if (dev->class == ATA_DEV_ATA) {
2501 tf.command = ATA_CMD_ID_ATA;
2502 DPRINTK("do ATA identify\n");
2504 tf.command = ATA_CMD_ID_ATAPI;
2505 DPRINTK("do ATAPI identify\n");
2508 tf.flags |= ATA_TFLAG_DEVICE;
2509 tf.protocol = ATA_PROT_PIO;
2511 if (ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
2512 dev->id, sizeof(dev->id)))
2515 swap_buf_le16(dev->id, ATA_ID_WORDS);
2523 printk(KERN_ERR "ata%u: failed to reread ID, disabled\n", ap->id);
2524 ata_port_disable(ap);
2528 * ata_dev_init_params - Issue INIT DEV PARAMS command
2529 * @ap: Port associated with device @dev
2530 * @dev: Device to which command will be sent
2535 static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
2537 struct ata_taskfile tf;
2538 u16 sectors = dev->id[6];
2539 u16 heads = dev->id[3];
2541 /* Number of sectors per track 1-255. Number of heads 1-16 */
2542 if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
2545 /* set up init dev params taskfile */
2546 DPRINTK("init dev params \n");
2548 ata_tf_init(ap, &tf, dev->devno);
2549 tf.command = ATA_CMD_INIT_DEV_PARAMS;
2550 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2551 tf.protocol = ATA_PROT_NODATA;
2553 tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
2555 if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) {
2556 printk(KERN_ERR "ata%u: failed to init parameters, disabled\n",
2558 ata_port_disable(ap);
2565 * ata_sg_clean - Unmap DMA memory associated with command
2566 * @qc: Command containing DMA memory to be released
2568 * Unmap all mapped DMA memory associated with this command.
2571 * spin_lock_irqsave(host_set lock)
2574 static void ata_sg_clean(struct ata_queued_cmd *qc)
2576 struct ata_port *ap = qc->ap;
2577 struct scatterlist *sg = qc->__sg;
2578 int dir = qc->dma_dir;
2579 void *pad_buf = NULL;
2581 WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
2582 WARN_ON(sg == NULL);
2584 if (qc->flags & ATA_QCFLAG_SINGLE)
2585 WARN_ON(qc->n_elem != 1);
2587 VPRINTK("unmapping %u sg elements\n", qc->n_elem);
2589 /* if we padded the buffer out to 32-bit bound, and data
2590 * xfer direction is from-device, we must copy from the
2591 * pad buffer back into the supplied buffer
2593 if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
2594 pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
2596 if (qc->flags & ATA_QCFLAG_SG) {
2598 dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
2599 /* restore last sg */
2600 sg[qc->orig_n_elem - 1].length += qc->pad_len;
2602 struct scatterlist *psg = &qc->pad_sgent;
2603 void *addr = kmap_atomic(psg->page, KM_IRQ0);
2604 memcpy(addr + psg->offset, pad_buf, qc->pad_len);
2605 kunmap_atomic(addr, KM_IRQ0);
2608 if (sg_dma_len(&sg[0]) > 0)
2609 dma_unmap_single(ap->host_set->dev,
2610 sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
2613 sg->length += qc->pad_len;
2615 memcpy(qc->buf_virt + sg->length - qc->pad_len,
2616 pad_buf, qc->pad_len);
2619 qc->flags &= ~ATA_QCFLAG_DMAMAP;
2624 * ata_fill_sg - Fill PCI IDE PRD table
2625 * @qc: Metadata associated with taskfile to be transferred
2627 * Fill PCI IDE PRD (scatter-gather) table with segments
2628 * associated with the current disk command.
2631 * spin_lock_irqsave(host_set lock)
2634 static void ata_fill_sg(struct ata_queued_cmd *qc)
2636 struct ata_port *ap = qc->ap;
2637 struct scatterlist *sg;
2640 WARN_ON(qc->__sg == NULL);
2641 WARN_ON(qc->n_elem == 0);
2644 ata_for_each_sg(sg, qc) {
2648 /* determine if physical DMA addr spans 64K boundary.
2649 * Note h/w doesn't support 64-bit, so we unconditionally
2650 * truncate dma_addr_t to u32.
2652 addr = (u32) sg_dma_address(sg);
2653 sg_len = sg_dma_len(sg);
2656 offset = addr & 0xffff;
2658 if ((offset + sg_len) > 0x10000)
2659 len = 0x10000 - offset;
2661 ap->prd[idx].addr = cpu_to_le32(addr);
2662 ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
2663 VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
2672 ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
2675 * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
2676 * @qc: Metadata associated with taskfile to check
2678 * Allow low-level driver to filter ATA PACKET commands, returning
2679 * a status indicating whether or not it is OK to use DMA for the
2680 * supplied PACKET command.
2683 * spin_lock_irqsave(host_set lock)
2685 * RETURNS: 0 when ATAPI DMA can be used
2688 int ata_check_atapi_dma(struct ata_queued_cmd *qc)
2690 struct ata_port *ap = qc->ap;
2691 int rc = 0; /* Assume ATAPI DMA is OK by default */
2693 if (ap->ops->check_atapi_dma)
2694 rc = ap->ops->check_atapi_dma(qc);
2699 * ata_qc_prep - Prepare taskfile for submission
2700 * @qc: Metadata associated with taskfile to be prepared
2702 * Prepare ATA taskfile for submission.
2705 * spin_lock_irqsave(host_set lock)
2707 void ata_qc_prep(struct ata_queued_cmd *qc)
2709 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
2716 * ata_sg_init_one - Associate command with memory buffer
2717 * @qc: Command to be associated
2718 * @buf: Memory buffer
2719 * @buflen: Length of memory buffer, in bytes.
2721 * Initialize the data-related elements of queued_cmd @qc
2722 * to point to a single memory buffer, @buf of byte length @buflen.
2725 * spin_lock_irqsave(host_set lock)
2728 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
2730 struct scatterlist *sg;
2732 qc->flags |= ATA_QCFLAG_SINGLE;
2734 memset(&qc->sgent, 0, sizeof(qc->sgent));
2735 qc->__sg = &qc->sgent;
2737 qc->orig_n_elem = 1;
2741 sg_init_one(sg, buf, buflen);
2745 * ata_sg_init - Associate command with scatter-gather table.
2746 * @qc: Command to be associated
2747 * @sg: Scatter-gather table.
2748 * @n_elem: Number of elements in s/g table.
2750 * Initialize the data-related elements of queued_cmd @qc
2751 * to point to a scatter-gather table @sg, containing @n_elem
2755 * spin_lock_irqsave(host_set lock)
2758 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
2759 unsigned int n_elem)
2761 qc->flags |= ATA_QCFLAG_SG;
2763 qc->n_elem = n_elem;
2764 qc->orig_n_elem = n_elem;
2768 * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
2769 * @qc: Command with memory buffer to be mapped.
2771 * DMA-map the memory buffer associated with queued_cmd @qc.
2774 * spin_lock_irqsave(host_set lock)
2777 * Zero on success, negative on error.
2780 static int ata_sg_setup_one(struct ata_queued_cmd *qc)
2782 struct ata_port *ap = qc->ap;
2783 int dir = qc->dma_dir;
2784 struct scatterlist *sg = qc->__sg;
2785 dma_addr_t dma_address;
2787 /* we must lengthen transfers to end on a 32-bit boundary */
2788 qc->pad_len = sg->length & 3;
2790 void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
2791 struct scatterlist *psg = &qc->pad_sgent;
2793 WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
2795 memset(pad_buf, 0, ATA_DMA_PAD_SZ);
2797 if (qc->tf.flags & ATA_TFLAG_WRITE)
2798 memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len,
2801 sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
2802 sg_dma_len(psg) = ATA_DMA_PAD_SZ;
2804 sg->length -= qc->pad_len;
2806 DPRINTK("padding done, sg->length=%u pad_len=%u\n",
2807 sg->length, qc->pad_len);
2811 sg_dma_address(sg) = 0;
2815 dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
2817 if (dma_mapping_error(dma_address)) {
2819 sg->length += qc->pad_len;
2823 sg_dma_address(sg) = dma_address;
2825 sg_dma_len(sg) = sg->length;
2827 DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
2828 qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
2834 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
2835 * @qc: Command with scatter-gather table to be mapped.
2837 * DMA-map the scatter-gather table associated with queued_cmd @qc.
2840 * spin_lock_irqsave(host_set lock)
2843 * Zero on success, negative on error.
2847 static int ata_sg_setup(struct ata_queued_cmd *qc)
2849 struct ata_port *ap = qc->ap;
2850 struct scatterlist *sg = qc->__sg;
2851 struct scatterlist *lsg = &sg[qc->n_elem - 1];
2852 int n_elem, pre_n_elem, dir, trim_sg = 0;
2854 VPRINTK("ENTER, ata%u\n", ap->id);
2855 WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
2857 /* we must lengthen transfers to end on a 32-bit boundary */
2858 qc->pad_len = lsg->length & 3;
2860 void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
2861 struct scatterlist *psg = &qc->pad_sgent;
2862 unsigned int offset;
2864 WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
2866 memset(pad_buf, 0, ATA_DMA_PAD_SZ);
2869 * psg->page/offset are used to copy to-be-written
2870 * data in this function or read data in ata_sg_clean.
2872 offset = lsg->offset + lsg->length - qc->pad_len;
2873 psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT);
2874 psg->offset = offset_in_page(offset);
2876 if (qc->tf.flags & ATA_TFLAG_WRITE) {
2877 void *addr = kmap_atomic(psg->page, KM_IRQ0);
2878 memcpy(pad_buf, addr + psg->offset, qc->pad_len);
2879 kunmap_atomic(addr, KM_IRQ0);
2882 sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
2883 sg_dma_len(psg) = ATA_DMA_PAD_SZ;
2885 lsg->length -= qc->pad_len;
2886 if (lsg->length == 0)
2889 DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
2890 qc->n_elem - 1, lsg->length, qc->pad_len);
2893 pre_n_elem = qc->n_elem;
2894 if (trim_sg && pre_n_elem)
2903 n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
2905 /* restore last sg */
2906 lsg->length += qc->pad_len;
2910 DPRINTK("%d sg elements mapped\n", n_elem);
2913 qc->n_elem = n_elem;
2919 * ata_poll_qc_complete - turn irq back on and finish qc
2920 * @qc: Command to complete
2921 * @err_mask: ATA status register content
2924 * None. (grabs host lock)
2927 void ata_poll_qc_complete(struct ata_queued_cmd *qc)
2929 struct ata_port *ap = qc->ap;
2930 unsigned long flags;
2932 spin_lock_irqsave(&ap->host_set->lock, flags);
2933 ap->flags &= ~ATA_FLAG_NOINTR;
2935 ata_qc_complete(qc);
2936 spin_unlock_irqrestore(&ap->host_set->lock, flags);
2940 * ata_pio_poll - poll using PIO, depending on current state
2941 * @ap: the target ata_port
2944 * None. (executing in kernel thread context)
2947 * timeout value to use
2950 static unsigned long ata_pio_poll(struct ata_port *ap)
2952 struct ata_queued_cmd *qc;
2954 unsigned int poll_state = HSM_ST_UNKNOWN;
2955 unsigned int reg_state = HSM_ST_UNKNOWN;
2957 qc = ata_qc_from_tag(ap, ap->active_tag);
2958 WARN_ON(qc == NULL);
2960 switch (ap->hsm_task_state) {
2963 poll_state = HSM_ST_POLL;
2967 case HSM_ST_LAST_POLL:
2968 poll_state = HSM_ST_LAST_POLL;
2969 reg_state = HSM_ST_LAST;
2976 status = ata_chk_status(ap);
2977 if (status & ATA_BUSY) {
2978 if (time_after(jiffies, ap->pio_task_timeout)) {
2979 qc->err_mask |= AC_ERR_TIMEOUT;
2980 ap->hsm_task_state = HSM_ST_TMOUT;
2983 ap->hsm_task_state = poll_state;
2984 return ATA_SHORT_PAUSE;
2987 ap->hsm_task_state = reg_state;
2992 * ata_pio_complete - check if drive is busy or idle
2993 * @ap: the target ata_port
2996 * None. (executing in kernel thread context)
2999 * Non-zero if qc completed, zero otherwise.
3002 static int ata_pio_complete (struct ata_port *ap)
3004 struct ata_queued_cmd *qc;
3008 * This is purely heuristic. This is a fast path. Sometimes when
3009 * we enter, BSY will be cleared in a chk-status or two. If not,
3010 * the drive is probably seeking or something. Snooze for a couple
3011 * msecs, then chk-status again. If still busy, fall back to
3012 * HSM_ST_POLL state.
3014 drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
3015 if (drv_stat & ATA_BUSY) {
3017 drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
3018 if (drv_stat & ATA_BUSY) {
3019 ap->hsm_task_state = HSM_ST_LAST_POLL;
3020 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
3025 qc = ata_qc_from_tag(ap, ap->active_tag);
3026 WARN_ON(qc == NULL);
3028 drv_stat = ata_wait_idle(ap);
3029 if (!ata_ok(drv_stat)) {
3030 qc->err_mask |= __ac_err_mask(drv_stat);
3031 ap->hsm_task_state = HSM_ST_ERR;
3035 ap->hsm_task_state = HSM_ST_IDLE;
3037 WARN_ON(qc->err_mask);
3038 ata_poll_qc_complete(qc);
3040 /* another command may start at this point */
3047 * swap_buf_le16 - swap halves of 16-bit words in place
3048 * @buf: Buffer to swap
3049 * @buf_words: Number of 16-bit words in buffer.
3051 * Swap halves of 16-bit words if needed to convert from
3052 * little-endian byte order to native cpu byte order, or
3056 * Inherited from caller.
3058 void swap_buf_le16(u16 *buf, unsigned int buf_words)
3063 for (i = 0; i < buf_words; i++)
3064 buf[i] = le16_to_cpu(buf[i]);
3065 #endif /* __BIG_ENDIAN */
3069 * ata_mmio_data_xfer - Transfer data by MMIO
3070 * @ap: port to read/write
3072 * @buflen: buffer length
3073 * @write_data: read/write
3075 * Transfer data from/to the device data register by MMIO.
3078 * Inherited from caller.
3081 static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
3082 unsigned int buflen, int write_data)
3085 unsigned int words = buflen >> 1;
3086 u16 *buf16 = (u16 *) buf;
3087 void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
3089 /* Transfer multiple of 2 bytes */
3091 for (i = 0; i < words; i++)
3092 writew(le16_to_cpu(buf16[i]), mmio);
3094 for (i = 0; i < words; i++)
3095 buf16[i] = cpu_to_le16(readw(mmio));
3098 /* Transfer trailing 1 byte, if any. */
3099 if (unlikely(buflen & 0x01)) {
3100 u16 align_buf[1] = { 0 };
3101 unsigned char *trailing_buf = buf + buflen - 1;
3104 memcpy(align_buf, trailing_buf, 1);
3105 writew(le16_to_cpu(align_buf[0]), mmio);
3107 align_buf[0] = cpu_to_le16(readw(mmio));
3108 memcpy(trailing_buf, align_buf, 1);
3114 * ata_pio_data_xfer - Transfer data by PIO
3115 * @ap: port to read/write
3117 * @buflen: buffer length
3118 * @write_data: read/write
3120 * Transfer data from/to the device data register by PIO.
3123 * Inherited from caller.
3126 static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
3127 unsigned int buflen, int write_data)
3129 unsigned int words = buflen >> 1;
3131 /* Transfer multiple of 2 bytes */
3133 outsw(ap->ioaddr.data_addr, buf, words);
3135 insw(ap->ioaddr.data_addr, buf, words);
3137 /* Transfer trailing 1 byte, if any. */
3138 if (unlikely(buflen & 0x01)) {
3139 u16 align_buf[1] = { 0 };
3140 unsigned char *trailing_buf = buf + buflen - 1;
3143 memcpy(align_buf, trailing_buf, 1);
3144 outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
3146 align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
3147 memcpy(trailing_buf, align_buf, 1);
3153 * ata_data_xfer - Transfer data from/to the data register.
3154 * @ap: port to read/write
3156 * @buflen: buffer length
3157 * @do_write: read/write
3159 * Transfer data from/to the device data register.
3162 * Inherited from caller.
3165 static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
3166 unsigned int buflen, int do_write)
3168 /* Make the crap hardware pay the costs not the good stuff */
3169 if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) {
3170 unsigned long flags;
3171 local_irq_save(flags);
3172 if (ap->flags & ATA_FLAG_MMIO)
3173 ata_mmio_data_xfer(ap, buf, buflen, do_write);
3175 ata_pio_data_xfer(ap, buf, buflen, do_write);
3176 local_irq_restore(flags);
3178 if (ap->flags & ATA_FLAG_MMIO)
3179 ata_mmio_data_xfer(ap, buf, buflen, do_write);
3181 ata_pio_data_xfer(ap, buf, buflen, do_write);
3186 * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
3187 * @qc: Command on going
3189 * Transfer ATA_SECT_SIZE of data from/to the ATA device.
3192 * Inherited from caller.
3195 static void ata_pio_sector(struct ata_queued_cmd *qc)
3197 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3198 struct scatterlist *sg = qc->__sg;
3199 struct ata_port *ap = qc->ap;
3201 unsigned int offset;
3204 if (qc->cursect == (qc->nsect - 1))
3205 ap->hsm_task_state = HSM_ST_LAST;
3207 page = sg[qc->cursg].page;
3208 offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
3210 /* get the current page and offset */
3211 page = nth_page(page, (offset >> PAGE_SHIFT));
3212 offset %= PAGE_SIZE;
3214 buf = kmap(page) + offset;
3219 if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
3224 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
3226 /* do the actual data transfer */
3227 do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3228 ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
3234 * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
3235 * @qc: Command on going
3236 * @bytes: number of bytes
3238 * Transfer Transfer data from/to the ATAPI device.
3241 * Inherited from caller.
3245 static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
3247 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3248 struct scatterlist *sg = qc->__sg;
3249 struct ata_port *ap = qc->ap;
3252 unsigned int offset, count;
3254 if (qc->curbytes + bytes >= qc->nbytes)
3255 ap->hsm_task_state = HSM_ST_LAST;
3258 if (unlikely(qc->cursg >= qc->n_elem)) {
3260 * The end of qc->sg is reached and the device expects
3261 * more data to transfer. In order not to overrun qc->sg
3262 * and fulfill length specified in the byte count register,
3263 * - for read case, discard trailing data from the device
3264 * - for write case, padding zero data to the device
3266 u16 pad_buf[1] = { 0 };
3267 unsigned int words = bytes >> 1;
3270 if (words) /* warning if bytes > 1 */
3271 printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
3274 for (i = 0; i < words; i++)
3275 ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
3277 ap->hsm_task_state = HSM_ST_LAST;
3281 sg = &qc->__sg[qc->cursg];
3284 offset = sg->offset + qc->cursg_ofs;
3286 /* get the current page and offset */
3287 page = nth_page(page, (offset >> PAGE_SHIFT));
3288 offset %= PAGE_SIZE;
3290 /* don't overrun current sg */
3291 count = min(sg->length - qc->cursg_ofs, bytes);
3293 /* don't cross page boundaries */
3294 count = min(count, (unsigned int)PAGE_SIZE - offset);
3296 buf = kmap(page) + offset;
3299 qc->curbytes += count;
3300 qc->cursg_ofs += count;
3302 if (qc->cursg_ofs == sg->length) {
3307 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
3309 /* do the actual data transfer */
3310 ata_data_xfer(ap, buf, count, do_write);
3319 * atapi_pio_bytes - Transfer data from/to the ATAPI device.
3320 * @qc: Command on going
3322 * Transfer Transfer data from/to the ATAPI device.
3325 * Inherited from caller.
3328 static void atapi_pio_bytes(struct ata_queued_cmd *qc)
3330 struct ata_port *ap = qc->ap;
3331 struct ata_device *dev = qc->dev;
3332 unsigned int ireason, bc_lo, bc_hi, bytes;
3333 int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
3335 ap->ops->tf_read(ap, &qc->tf);
3336 ireason = qc->tf.nsect;
3337 bc_lo = qc->tf.lbam;
3338 bc_hi = qc->tf.lbah;
3339 bytes = (bc_hi << 8) | bc_lo;
3341 /* shall be cleared to zero, indicating xfer of data */
3342 if (ireason & (1 << 0))
3345 /* make sure transfer direction matches expected */
3346 i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
3347 if (do_write != i_write)
3350 __atapi_pio_bytes(qc, bytes);
3355 printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
3356 ap->id, dev->devno);
3357 qc->err_mask |= AC_ERR_HSM;
3358 ap->hsm_task_state = HSM_ST_ERR;
3362 * ata_pio_block - start PIO on a block
3363 * @ap: the target ata_port
3366 * None. (executing in kernel thread context)
3369 static void ata_pio_block(struct ata_port *ap)
3371 struct ata_queued_cmd *qc;
3375 * This is purely heuristic. This is a fast path.
3376 * Sometimes when we enter, BSY will be cleared in
3377 * a chk-status or two. If not, the drive is probably seeking
3378 * or something. Snooze for a couple msecs, then
3379 * chk-status again. If still busy, fall back to
3380 * HSM_ST_POLL state.
3382 status = ata_busy_wait(ap, ATA_BUSY, 5);
3383 if (status & ATA_BUSY) {
3385 status = ata_busy_wait(ap, ATA_BUSY, 10);
3386 if (status & ATA_BUSY) {
3387 ap->hsm_task_state = HSM_ST_POLL;
3388 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
3393 qc = ata_qc_from_tag(ap, ap->active_tag);
3394 WARN_ON(qc == NULL);
3397 if (status & (ATA_ERR | ATA_DF)) {
3398 qc->err_mask |= AC_ERR_DEV;
3399 ap->hsm_task_state = HSM_ST_ERR;
3403 /* transfer data if any */
3404 if (is_atapi_taskfile(&qc->tf)) {
3405 /* DRQ=0 means no more data to transfer */
3406 if ((status & ATA_DRQ) == 0) {
3407 ap->hsm_task_state = HSM_ST_LAST;
3411 atapi_pio_bytes(qc);
3413 /* handle BSY=0, DRQ=0 as error */
3414 if ((status & ATA_DRQ) == 0) {
3415 qc->err_mask |= AC_ERR_HSM;
3416 ap->hsm_task_state = HSM_ST_ERR;
3424 static void ata_pio_error(struct ata_port *ap)
3426 struct ata_queued_cmd *qc;
3428 printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
3430 qc = ata_qc_from_tag(ap, ap->active_tag);
3431 WARN_ON(qc == NULL);
3433 /* make sure qc->err_mask is available to
3434 * know what's wrong and recover
3436 WARN_ON(qc->err_mask == 0);
3438 ap->hsm_task_state = HSM_ST_IDLE;
3440 ata_poll_qc_complete(qc);
3443 static void ata_pio_task(void *_data)
3445 struct ata_port *ap = _data;
3446 unsigned long timeout;
3453 switch (ap->hsm_task_state) {
3462 qc_completed = ata_pio_complete(ap);
3466 case HSM_ST_LAST_POLL:
3467 timeout = ata_pio_poll(ap);
3477 ata_queue_delayed_pio_task(ap, timeout);
3478 else if (!qc_completed)
3483 * ata_qc_timeout - Handle timeout of queued command
3484 * @qc: Command that timed out
3486 * Some part of the kernel (currently, only the SCSI layer)
3487 * has noticed that the active command on port @ap has not
3488 * completed after a specified length of time. Handle this
3489 * condition by disabling DMA (if necessary) and completing
3490 * transactions, with error if necessary.
3492 * This also handles the case of the "lost interrupt", where
3493 * for some reason (possibly hardware bug, possibly driver bug)
3494 * an interrupt was not delivered to the driver, even though the
3495 * transaction completed successfully.
3498 * Inherited from SCSI layer (none, can sleep)
3501 static void ata_qc_timeout(struct ata_queued_cmd *qc)
3503 struct ata_port *ap = qc->ap;
3504 struct ata_host_set *host_set = ap->host_set;
3505 u8 host_stat = 0, drv_stat;
3506 unsigned long flags;
3510 ata_flush_pio_tasks(ap);
3511 ap->hsm_task_state = HSM_ST_IDLE;
3513 spin_lock_irqsave(&host_set->lock, flags);
3515 switch (qc->tf.protocol) {
3518 case ATA_PROT_ATAPI_DMA:
3519 host_stat = ap->ops->bmdma_status(ap);
3521 /* before we do anything else, clear DMA-Start bit */
3522 ap->ops->bmdma_stop(qc);
3528 drv_stat = ata_chk_status(ap);
3530 /* ack bmdma irq events */
3531 ap->ops->irq_clear(ap);
3533 printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
3534 ap->id, qc->tf.command, drv_stat, host_stat);
3536 /* complete taskfile transaction */
3537 qc->err_mask |= ac_err_mask(drv_stat);
3541 spin_unlock_irqrestore(&host_set->lock, flags);
3543 ata_eh_qc_complete(qc);
3549 * ata_eng_timeout - Handle timeout of queued command
3550 * @ap: Port on which timed-out command is active
3552 * Some part of the kernel (currently, only the SCSI layer)
3553 * has noticed that the active command on port @ap has not
3554 * completed after a specified length of time. Handle this
3555 * condition by disabling DMA (if necessary) and completing
3556 * transactions, with error if necessary.
3558 * This also handles the case of the "lost interrupt", where
3559 * for some reason (possibly hardware bug, possibly driver bug)
3560 * an interrupt was not delivered to the driver, even though the
3561 * transaction completed successfully.
3564 * Inherited from SCSI layer (none, can sleep)
3567 void ata_eng_timeout(struct ata_port *ap)
3571 ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
3577 * ata_qc_new - Request an available ATA command, for queueing
3578 * @ap: Port associated with device @dev
3579 * @dev: Device from whom we request an available command structure
3585 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
3587 struct ata_queued_cmd *qc = NULL;
3590 for (i = 0; i < ATA_MAX_QUEUE; i++)
3591 if (!test_and_set_bit(i, &ap->qactive)) {
3592 qc = ata_qc_from_tag(ap, i);
3603 * ata_qc_new_init - Request an available ATA command, and initialize it
3604 * @ap: Port associated with device @dev
3605 * @dev: Device from whom we request an available command structure
3611 struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
3612 struct ata_device *dev)
3614 struct ata_queued_cmd *qc;
3616 qc = ata_qc_new(ap);
3629 * ata_qc_free - free unused ata_queued_cmd
3630 * @qc: Command to complete
3632 * Designed to free unused ata_queued_cmd object
3633 * in case something prevents using it.
3636 * spin_lock_irqsave(host_set lock)
3638 void ata_qc_free(struct ata_queued_cmd *qc)
3640 struct ata_port *ap = qc->ap;
3643 WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
3647 if (likely(ata_tag_valid(tag))) {
3648 if (tag == ap->active_tag)
3649 ap->active_tag = ATA_TAG_POISON;
3650 qc->tag = ATA_TAG_POISON;
3651 clear_bit(tag, &ap->qactive);
3655 void __ata_qc_complete(struct ata_queued_cmd *qc)
3657 WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
3658 WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
3660 if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
3663 /* atapi: mark qc as inactive to prevent the interrupt handler
3664 * from completing the command twice later, before the error handler
3665 * is called. (when rc != 0 and atapi request sense is needed)
3667 qc->flags &= ~ATA_QCFLAG_ACTIVE;
3669 /* call completion callback */
3670 qc->complete_fn(qc);
3673 static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
3675 struct ata_port *ap = qc->ap;
3677 switch (qc->tf.protocol) {
3679 case ATA_PROT_ATAPI_DMA:
3682 case ATA_PROT_ATAPI:
3684 case ATA_PROT_PIO_MULT:
3685 if (ap->flags & ATA_FLAG_PIO_DMA)
3698 * ata_qc_issue - issue taskfile to device
3699 * @qc: command to issue to device
3701 * Prepare an ATA command to submission to device.
3702 * This includes mapping the data into a DMA-able
3703 * area, filling in the S/G table, and finally
3704 * writing the taskfile to hardware, starting the command.
3707 * spin_lock_irqsave(host_set lock)
3710 * Zero on success, AC_ERR_* mask on failure
3713 unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
3715 struct ata_port *ap = qc->ap;
3717 if (ata_should_dma_map(qc)) {
3718 if (qc->flags & ATA_QCFLAG_SG) {
3719 if (ata_sg_setup(qc))
3721 } else if (qc->flags & ATA_QCFLAG_SINGLE) {
3722 if (ata_sg_setup_one(qc))
3726 qc->flags &= ~ATA_QCFLAG_DMAMAP;
3729 ap->ops->qc_prep(qc);
3731 qc->ap->active_tag = qc->tag;
3732 qc->flags |= ATA_QCFLAG_ACTIVE;
3734 return ap->ops->qc_issue(qc);
3737 qc->flags &= ~ATA_QCFLAG_DMAMAP;
3738 return AC_ERR_SYSTEM;
3743 * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
3744 * @qc: command to issue to device
3746 * Using various libata functions and hooks, this function
3747 * starts an ATA command. ATA commands are grouped into
3748 * classes called "protocols", and issuing each type of protocol
3749 * is slightly different.
3751 * May be used as the qc_issue() entry in ata_port_operations.
3754 * spin_lock_irqsave(host_set lock)
3757 * Zero on success, AC_ERR_* mask on failure
3760 unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
3762 struct ata_port *ap = qc->ap;
3764 ata_dev_select(ap, qc->dev->devno, 1, 0);
3766 switch (qc->tf.protocol) {
3767 case ATA_PROT_NODATA:
3768 ata_tf_to_host(ap, &qc->tf);
3772 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
3773 ap->ops->bmdma_setup(qc); /* set up bmdma */
3774 ap->ops->bmdma_start(qc); /* initiate bmdma */
3777 case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
3778 ata_qc_set_polling(qc);
3779 ata_tf_to_host(ap, &qc->tf);
3780 ap->hsm_task_state = HSM_ST;
3781 ata_queue_pio_task(ap);
3784 case ATA_PROT_ATAPI:
3785 ata_qc_set_polling(qc);
3786 ata_tf_to_host(ap, &qc->tf);
3787 ata_queue_packet_task(ap);
3790 case ATA_PROT_ATAPI_NODATA:
3791 ap->flags |= ATA_FLAG_NOINTR;
3792 ata_tf_to_host(ap, &qc->tf);
3793 ata_queue_packet_task(ap);
3796 case ATA_PROT_ATAPI_DMA:
3797 ap->flags |= ATA_FLAG_NOINTR;
3798 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
3799 ap->ops->bmdma_setup(qc); /* set up bmdma */
3800 ata_queue_packet_task(ap);
3805 return AC_ERR_SYSTEM;
3812 * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
3813 * @qc: Info associated with this ATA transaction.
3816 * spin_lock_irqsave(host_set lock)
3819 static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
3821 struct ata_port *ap = qc->ap;
3822 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
3824 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3826 /* load PRD table addr. */
3827 mb(); /* make sure PRD table writes are visible to controller */
3828 writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
3830 /* specify data direction, triple-check start bit is clear */
3831 dmactl = readb(mmio + ATA_DMA_CMD);
3832 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
3834 dmactl |= ATA_DMA_WR;
3835 writeb(dmactl, mmio + ATA_DMA_CMD);
3837 /* issue r/w command */
3838 ap->ops->exec_command(ap, &qc->tf);
3842 * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
3843 * @qc: Info associated with this ATA transaction.
3846 * spin_lock_irqsave(host_set lock)
3849 static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
3851 struct ata_port *ap = qc->ap;
3852 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3855 /* start host DMA transaction */
3856 dmactl = readb(mmio + ATA_DMA_CMD);
3857 writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
3859 /* Strictly, one may wish to issue a readb() here, to
3860 * flush the mmio write. However, control also passes
3861 * to the hardware at this point, and it will interrupt
3862 * us when we are to resume control. So, in effect,
3863 * we don't care when the mmio write flushes.
3864 * Further, a read of the DMA status register _immediately_
3865 * following the write may not be what certain flaky hardware
3866 * is expected, so I think it is best to not add a readb()
3867 * without first all the MMIO ATA cards/mobos.
3868 * Or maybe I'm just being paranoid.
3873 * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
3874 * @qc: Info associated with this ATA transaction.
3877 * spin_lock_irqsave(host_set lock)
3880 static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
3882 struct ata_port *ap = qc->ap;
3883 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
3886 /* load PRD table addr. */
3887 outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
3889 /* specify data direction, triple-check start bit is clear */
3890 dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3891 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
3893 dmactl |= ATA_DMA_WR;
3894 outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3896 /* issue r/w command */
3897 ap->ops->exec_command(ap, &qc->tf);
3901 * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
3902 * @qc: Info associated with this ATA transaction.
3905 * spin_lock_irqsave(host_set lock)
3908 static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
3910 struct ata_port *ap = qc->ap;
3913 /* start host DMA transaction */
3914 dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3915 outb(dmactl | ATA_DMA_START,
3916 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3921 * ata_bmdma_start - Start a PCI IDE BMDMA transaction
3922 * @qc: Info associated with this ATA transaction.
3924 * Writes the ATA_DMA_START flag to the DMA command register.
3926 * May be used as the bmdma_start() entry in ata_port_operations.
3929 * spin_lock_irqsave(host_set lock)
3931 void ata_bmdma_start(struct ata_queued_cmd *qc)
3933 if (qc->ap->flags & ATA_FLAG_MMIO)
3934 ata_bmdma_start_mmio(qc);
3936 ata_bmdma_start_pio(qc);
3941 * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
3942 * @qc: Info associated with this ATA transaction.
3944 * Writes address of PRD table to device's PRD Table Address
3945 * register, sets the DMA control register, and calls
3946 * ops->exec_command() to start the transfer.
3948 * May be used as the bmdma_setup() entry in ata_port_operations.
3951 * spin_lock_irqsave(host_set lock)
3953 void ata_bmdma_setup(struct ata_queued_cmd *qc)
3955 if (qc->ap->flags & ATA_FLAG_MMIO)
3956 ata_bmdma_setup_mmio(qc);
3958 ata_bmdma_setup_pio(qc);
3963 * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
3964 * @ap: Port associated with this ATA transaction.
3966 * Clear interrupt and error flags in DMA status register.
3968 * May be used as the irq_clear() entry in ata_port_operations.
3971 * spin_lock_irqsave(host_set lock)
3974 void ata_bmdma_irq_clear(struct ata_port *ap)
3976 if (ap->flags & ATA_FLAG_MMIO) {
3977 void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
3978 writeb(readb(mmio), mmio);
3980 unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
3981 outb(inb(addr), addr);
3988 * ata_bmdma_status - Read PCI IDE BMDMA status
3989 * @ap: Port associated with this ATA transaction.
3991 * Read and return BMDMA status register.
3993 * May be used as the bmdma_status() entry in ata_port_operations.
3996 * spin_lock_irqsave(host_set lock)
3999 u8 ata_bmdma_status(struct ata_port *ap)
4002 if (ap->flags & ATA_FLAG_MMIO) {
4003 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
4004 host_stat = readb(mmio + ATA_DMA_STATUS);
4006 host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
4012 * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
4013 * @qc: Command we are ending DMA for
4015 * Clears the ATA_DMA_START flag in the dma control register
4017 * May be used as the bmdma_stop() entry in ata_port_operations.
4020 * spin_lock_irqsave(host_set lock)
4023 void ata_bmdma_stop(struct ata_queued_cmd *qc)
4025 struct ata_port *ap = qc->ap;
4026 if (ap->flags & ATA_FLAG_MMIO) {
4027 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
4029 /* clear start/stop bit */
4030 writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
4031 mmio + ATA_DMA_CMD);
4033 /* clear start/stop bit */
4034 outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
4035 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
4038 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
4039 ata_altstatus(ap); /* dummy read */
4043 * ata_host_intr - Handle host interrupt for given (port, task)
4044 * @ap: Port on which interrupt arrived (possibly...)
4045 * @qc: Taskfile currently active in engine
4047 * Handle host interrupt for given queued command. Currently,
4048 * only DMA interrupts are handled. All other commands are
4049 * handled via polling with interrupts disabled (nIEN bit).
4052 * spin_lock_irqsave(host_set lock)
4055 * One if interrupt was handled, zero if not (shared irq).
4058 inline unsigned int ata_host_intr (struct ata_port *ap,
4059 struct ata_queued_cmd *qc)
4061 u8 status, host_stat;
4063 switch (qc->tf.protocol) {
4066 case ATA_PROT_ATAPI_DMA:
4067 case ATA_PROT_ATAPI:
4068 /* check status of DMA engine */
4069 host_stat = ap->ops->bmdma_status(ap);
4070 VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
4072 /* if it's not our irq... */
4073 if (!(host_stat & ATA_DMA_INTR))
4076 /* before we do anything else, clear DMA-Start bit */
4077 ap->ops->bmdma_stop(qc);
4081 case ATA_PROT_ATAPI_NODATA:
4082 case ATA_PROT_NODATA:
4083 /* check altstatus */
4084 status = ata_altstatus(ap);
4085 if (status & ATA_BUSY)
4088 /* check main status, clearing INTRQ */
4089 status = ata_chk_status(ap);
4090 if (unlikely(status & ATA_BUSY))
4092 DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
4093 ap->id, qc->tf.protocol, status);
4095 /* ack bmdma irq events */
4096 ap->ops->irq_clear(ap);
4098 /* complete taskfile transaction */
4099 qc->err_mask |= ac_err_mask(status);
4100 ata_qc_complete(qc);
4107 return 1; /* irq handled */
4110 ap->stats.idle_irq++;
4113 if ((ap->stats.idle_irq % 1000) == 0) {
4115 ata_irq_ack(ap, 0); /* debug trap */
4116 printk(KERN_WARNING "ata%d: irq trap\n", ap->id);
4119 return 0; /* irq not handled */
4123 * ata_interrupt - Default ATA host interrupt handler
4124 * @irq: irq line (unused)
4125 * @dev_instance: pointer to our ata_host_set information structure
4128 * Default interrupt handler for PCI IDE devices. Calls
4129 * ata_host_intr() for each port that is not disabled.
4132 * Obtains host_set lock during operation.
4135 * IRQ_NONE or IRQ_HANDLED.
4138 irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
4140 struct ata_host_set *host_set = dev_instance;
4142 unsigned int handled = 0;
4143 unsigned long flags;
4145 /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
4146 spin_lock_irqsave(&host_set->lock, flags);
4148 for (i = 0; i < host_set->n_ports; i++) {
4149 struct ata_port *ap;
4151 ap = host_set->ports[i];
4153 !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
4154 struct ata_queued_cmd *qc;
4156 qc = ata_qc_from_tag(ap, ap->active_tag);
4157 if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
4158 (qc->flags & ATA_QCFLAG_ACTIVE))
4159 handled |= ata_host_intr(ap, qc);
4163 spin_unlock_irqrestore(&host_set->lock, flags);
4165 return IRQ_RETVAL(handled);
4169 * atapi_packet_task - Write CDB bytes to hardware
4170 * @_data: Port to which ATAPI device is attached.
4172 * When device has indicated its readiness to accept
4173 * a CDB, this function is called. Send the CDB.
4174 * If DMA is to be performed, exit immediately.
4175 * Otherwise, we are in polling mode, so poll
4176 * status under operation succeeds or fails.
4179 * Kernel thread context (may sleep)
4182 static void atapi_packet_task(void *_data)
4184 struct ata_port *ap = _data;
4185 struct ata_queued_cmd *qc;
4188 qc = ata_qc_from_tag(ap, ap->active_tag);
4189 WARN_ON(qc == NULL);
4190 WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
4192 /* sleep-wait for BSY to clear */
4193 DPRINTK("busy wait\n");
4194 if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
4195 qc->err_mask |= AC_ERR_TIMEOUT;
4199 /* make sure DRQ is set */
4200 status = ata_chk_status(ap);
4201 if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
4202 qc->err_mask |= AC_ERR_HSM;
4207 DPRINTK("send cdb\n");
4208 WARN_ON(ap->cdb_len < 12);
4210 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
4211 qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
4212 unsigned long flags;
4214 /* Once we're done issuing command and kicking bmdma,
4215 * irq handler takes over. To not lose irq, we need
4216 * to clear NOINTR flag before sending cdb, but
4217 * interrupt handler shouldn't be invoked before we're
4218 * finished. Hence, the following locking.
4220 spin_lock_irqsave(&ap->host_set->lock, flags);
4221 ap->flags &= ~ATA_FLAG_NOINTR;
4222 ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
4223 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
4224 ap->ops->bmdma_start(qc); /* initiate bmdma */
4225 spin_unlock_irqrestore(&ap->host_set->lock, flags);
4227 ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
4229 /* PIO commands are handled by polling */
4230 ap->hsm_task_state = HSM_ST;
4231 ata_queue_pio_task(ap);
4237 ata_poll_qc_complete(qc);
4242 * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
4243 * without filling any other registers
4245 static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
4248 struct ata_taskfile tf;
4251 ata_tf_init(ap, &tf, dev->devno);
4254 tf.flags |= ATA_TFLAG_DEVICE;
4255 tf.protocol = ATA_PROT_NODATA;
4257 err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
4259 printk(KERN_ERR "%s: ata command failed: %d\n",
4265 static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
4269 if (!ata_try_flush_cache(dev))
4272 if (ata_id_has_flush_ext(dev->id))
4273 cmd = ATA_CMD_FLUSH_EXT;
4275 cmd = ATA_CMD_FLUSH;
4277 return ata_do_simple_cmd(ap, dev, cmd);
4280 static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
4282 return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
4285 static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
4287 return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
4291 * ata_device_resume - wakeup a previously suspended devices
4292 * @ap: port the device is connected to
4293 * @dev: the device to resume
4295 * Kick the drive back into action, by sending it an idle immediate
4296 * command and making sure its transfer mode matches between drive
4300 int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
4302 if (ap->flags & ATA_FLAG_SUSPENDED) {
4303 ap->flags &= ~ATA_FLAG_SUSPENDED;
4306 if (!ata_dev_present(dev))
4308 if (dev->class == ATA_DEV_ATA)
4309 ata_start_drive(ap, dev);
4315 * ata_device_suspend - prepare a device for suspend
4316 * @ap: port the device is connected to
4317 * @dev: the device to suspend
4319 * Flush the cache on the drive, if appropriate, then issue a
4320 * standbynow command.
4322 int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
4324 if (!ata_dev_present(dev))
4326 if (dev->class == ATA_DEV_ATA)
4327 ata_flush_cache(ap, dev);
4329 ata_standby_drive(ap, dev);
4330 ap->flags |= ATA_FLAG_SUSPENDED;
4335 * ata_port_start - Set port up for dma.
4336 * @ap: Port to initialize
4338 * Called just after data structures for each port are
4339 * initialized. Allocates space for PRD table.
4341 * May be used as the port_start() entry in ata_port_operations.
4344 * Inherited from caller.
4347 int ata_port_start (struct ata_port *ap)
4349 struct device *dev = ap->host_set->dev;
4352 ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
4356 rc = ata_pad_alloc(ap, dev);
4358 dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
4362 DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
4369 * ata_port_stop - Undo ata_port_start()
4370 * @ap: Port to shut down
4372 * Frees the PRD table.
4374 * May be used as the port_stop() entry in ata_port_operations.
4377 * Inherited from caller.
4380 void ata_port_stop (struct ata_port *ap)
4382 struct device *dev = ap->host_set->dev;
4384 dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
4385 ata_pad_free(ap, dev);
4388 void ata_host_stop (struct ata_host_set *host_set)
4390 if (host_set->mmio_base)
4391 iounmap(host_set->mmio_base);
4396 * ata_host_remove - Unregister SCSI host structure with upper layers
4397 * @ap: Port to unregister
4398 * @do_unregister: 1 if we fully unregister, 0 to just stop the port
4401 * Inherited from caller.
4404 static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
4406 struct Scsi_Host *sh = ap->host;
4411 scsi_remove_host(sh);
4413 ap->ops->port_stop(ap);
4417 * ata_host_init - Initialize an ata_port structure
4418 * @ap: Structure to initialize
4419 * @host: associated SCSI mid-layer structure
4420 * @host_set: Collection of hosts to which @ap belongs
4421 * @ent: Probe information provided by low-level driver
4422 * @port_no: Port number associated with this ata_port
4424 * Initialize a new ata_port structure, and its associated
4428 * Inherited from caller.
4431 static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
4432 struct ata_host_set *host_set,
4433 const struct ata_probe_ent *ent, unsigned int port_no)
4439 host->max_channel = 1;
4440 host->unique_id = ata_unique_id++;
4441 host->max_cmd_len = 12;
4443 ap->flags = ATA_FLAG_PORT_DISABLED;
4444 ap->id = host->unique_id;
4446 ap->ctl = ATA_DEVCTL_OBS;
4447 ap->host_set = host_set;
4448 ap->port_no = port_no;
4450 ent->legacy_mode ? ent->hard_port_no : port_no;
4451 ap->pio_mask = ent->pio_mask;
4452 ap->mwdma_mask = ent->mwdma_mask;
4453 ap->udma_mask = ent->udma_mask;
4454 ap->flags |= ent->host_flags;
4455 ap->ops = ent->port_ops;
4456 ap->cbl = ATA_CBL_NONE;
4457 ap->active_tag = ATA_TAG_POISON;
4458 ap->last_ctl = 0xFF;
4460 INIT_WORK(&ap->packet_task, atapi_packet_task, ap);
4461 INIT_WORK(&ap->pio_task, ata_pio_task, ap);
4462 INIT_LIST_HEAD(&ap->eh_done_q);
4464 for (i = 0; i < ATA_MAX_DEVICES; i++)
4465 ap->device[i].devno = i;
4468 ap->stats.unhandled_irq = 1;
4469 ap->stats.idle_irq = 1;
4472 memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports));
4476 * ata_host_add - Attach low-level ATA driver to system
4477 * @ent: Information provided by low-level driver
4478 * @host_set: Collections of ports to which we add
4479 * @port_no: Port number associated with this host
4481 * Attach low-level ATA driver to system.
4484 * PCI/etc. bus probe sem.
4487 * New ata_port on success, for NULL on error.
4490 static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
4491 struct ata_host_set *host_set,
4492 unsigned int port_no)
4494 struct Scsi_Host *host;
4495 struct ata_port *ap;
4499 host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
4503 ap = (struct ata_port *) &host->hostdata[0];
4505 ata_host_init(ap, host, host_set, ent, port_no);
4507 rc = ap->ops->port_start(ap);
4514 scsi_host_put(host);
4519 * ata_device_add - Register hardware device with ATA and SCSI layers
4520 * @ent: Probe information describing hardware device to be registered
4522 * This function processes the information provided in the probe
4523 * information struct @ent, allocates the necessary ATA and SCSI
4524 * host information structures, initializes them, and registers
4525 * everything with requisite kernel subsystems.
4527 * This function requests irqs, probes the ATA bus, and probes
4531 * PCI/etc. bus probe sem.
4534 * Number of ports registered. Zero on error (no ports registered).
4537 int ata_device_add(const struct ata_probe_ent *ent)
4539 unsigned int count = 0, i;
4540 struct device *dev = ent->dev;
4541 struct ata_host_set *host_set;
4544 /* alloc a container for our list of ATA ports (buses) */
4545 host_set = kzalloc(sizeof(struct ata_host_set) +
4546 (ent->n_ports * sizeof(void *)), GFP_KERNEL);
4549 spin_lock_init(&host_set->lock);
4551 host_set->dev = dev;
4552 host_set->n_ports = ent->n_ports;
4553 host_set->irq = ent->irq;
4554 host_set->mmio_base = ent->mmio_base;
4555 host_set->private_data = ent->private_data;
4556 host_set->ops = ent->port_ops;
4558 /* register each port bound to this device */
4559 for (i = 0; i < ent->n_ports; i++) {
4560 struct ata_port *ap;
4561 unsigned long xfer_mode_mask;
4563 ap = ata_host_add(ent, host_set, i);
4567 host_set->ports[i] = ap;
4568 xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
4569 (ap->mwdma_mask << ATA_SHIFT_MWDMA) |
4570 (ap->pio_mask << ATA_SHIFT_PIO);
4572 /* print per-port info to dmesg */
4573 printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
4574 "bmdma 0x%lX irq %lu\n",
4576 ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
4577 ata_mode_string(xfer_mode_mask),
4578 ap->ioaddr.cmd_addr,
4579 ap->ioaddr.ctl_addr,
4580 ap->ioaddr.bmdma_addr,
4584 host_set->ops->irq_clear(ap);
4591 /* obtain irq, that is shared between channels */
4592 if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
4593 DRV_NAME, host_set))
4596 /* perform each probe synchronously */
4597 DPRINTK("probe begin\n");
4598 for (i = 0; i < count; i++) {
4599 struct ata_port *ap;
4602 ap = host_set->ports[i];
4604 DPRINTK("ata%u: bus probe begin\n", ap->id);
4605 rc = ata_bus_probe(ap);
4606 DPRINTK("ata%u: bus probe end\n", ap->id);
4609 /* FIXME: do something useful here?
4610 * Current libata behavior will
4611 * tear down everything when
4612 * the module is removed
4613 * or the h/w is unplugged.
4617 rc = scsi_add_host(ap->host, dev);
4619 printk(KERN_ERR "ata%u: scsi_add_host failed\n",
4621 /* FIXME: do something useful here */
4622 /* FIXME: handle unconditional calls to
4623 * scsi_scan_host and ata_host_remove, below,
4629 /* probes are done, now scan each port's disk(s) */
4630 DPRINTK("host probe begin\n");
4631 for (i = 0; i < count; i++) {
4632 struct ata_port *ap = host_set->ports[i];
4634 ata_scsi_scan_host(ap);
4637 dev_set_drvdata(dev, host_set);
4639 VPRINTK("EXIT, returning %u\n", ent->n_ports);
4640 return ent->n_ports; /* success */
4643 for (i = 0; i < count; i++) {
4644 ata_host_remove(host_set->ports[i], 1);
4645 scsi_host_put(host_set->ports[i]->host);
4649 VPRINTK("EXIT, returning 0\n");
4654 * ata_host_set_remove - PCI layer callback for device removal
4655 * @host_set: ATA host set that was removed
4657 * Unregister all objects associated with this host set. Free those
4661 * Inherited from calling layer (may sleep).
4664 void ata_host_set_remove(struct ata_host_set *host_set)
4666 struct ata_port *ap;
4669 for (i = 0; i < host_set->n_ports; i++) {
4670 ap = host_set->ports[i];
4671 scsi_remove_host(ap->host);
4674 free_irq(host_set->irq, host_set);
4676 for (i = 0; i < host_set->n_ports; i++) {
4677 ap = host_set->ports[i];
4679 ata_scsi_release(ap->host);
4681 if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
4682 struct ata_ioports *ioaddr = &ap->ioaddr;
4684 if (ioaddr->cmd_addr == 0x1f0)
4685 release_region(0x1f0, 8);
4686 else if (ioaddr->cmd_addr == 0x170)
4687 release_region(0x170, 8);
4690 scsi_host_put(ap->host);
4693 if (host_set->ops->host_stop)
4694 host_set->ops->host_stop(host_set);
4700 * ata_scsi_release - SCSI layer callback hook for host unload
4701 * @host: libata host to be unloaded
4703 * Performs all duties necessary to shut down a libata port...
4704 * Kill port kthread, disable port, and release resources.
4707 * Inherited from SCSI layer.
4713 int ata_scsi_release(struct Scsi_Host *host)
4715 struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
4719 ap->ops->port_disable(ap);
4720 ata_host_remove(ap, 0);
4727 * ata_std_ports - initialize ioaddr with standard port offsets.
4728 * @ioaddr: IO address structure to be initialized
4730 * Utility function which initializes data_addr, error_addr,
4731 * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
4732 * device_addr, status_addr, and command_addr to standard offsets
4733 * relative to cmd_addr.
4735 * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
4738 void ata_std_ports(struct ata_ioports *ioaddr)
4740 ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
4741 ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
4742 ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
4743 ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
4744 ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
4745 ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
4746 ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
4747 ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
4748 ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
4749 ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
4755 void ata_pci_host_stop (struct ata_host_set *host_set)
4757 struct pci_dev *pdev = to_pci_dev(host_set->dev);
4759 pci_iounmap(pdev, host_set->mmio_base);
4763 * ata_pci_remove_one - PCI layer callback for device removal
4764 * @pdev: PCI device that was removed
4766 * PCI layer indicates to libata via this hook that
4767 * hot-unplug or module unload event has occurred.
4768 * Handle this by unregistering all objects associated
4769 * with this PCI device. Free those objects. Then finally
4770 * release PCI resources and disable device.
4773 * Inherited from PCI layer (may sleep).
4776 void ata_pci_remove_one (struct pci_dev *pdev)
4778 struct device *dev = pci_dev_to_dev(pdev);
4779 struct ata_host_set *host_set = dev_get_drvdata(dev);
4781 ata_host_set_remove(host_set);
4782 pci_release_regions(pdev);
4783 pci_disable_device(pdev);
4784 dev_set_drvdata(dev, NULL);
4787 /* move to PCI subsystem */
4788 int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
4790 unsigned long tmp = 0;
4792 switch (bits->width) {
4795 pci_read_config_byte(pdev, bits->reg, &tmp8);
4801 pci_read_config_word(pdev, bits->reg, &tmp16);
4807 pci_read_config_dword(pdev, bits->reg, &tmp32);
4818 return (tmp == bits->val) ? 1 : 0;
4821 int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
4823 pci_save_state(pdev);
4824 pci_disable_device(pdev);
4825 pci_set_power_state(pdev, PCI_D3hot);
4829 int ata_pci_device_resume(struct pci_dev *pdev)
4831 pci_set_power_state(pdev, PCI_D0);
4832 pci_restore_state(pdev);
4833 pci_enable_device(pdev);
4834 pci_set_master(pdev);
4837 #endif /* CONFIG_PCI */
4840 static int __init ata_init(void)
4842 ata_wq = create_workqueue("ata");
4846 printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
4850 static void __exit ata_exit(void)
4852 destroy_workqueue(ata_wq);
4855 module_init(ata_init);
4856 module_exit(ata_exit);
4858 static unsigned long ratelimit_time;
4859 static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
4861 int ata_ratelimit(void)
4864 unsigned long flags;
4866 spin_lock_irqsave(&ata_ratelimit_lock, flags);
4868 if (time_after(jiffies, ratelimit_time)) {
4870 ratelimit_time = jiffies + (HZ/5);
4874 spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
4880 * libata is essentially a library of internal helper functions for
4881 * low-level ATA host controller drivers. As such, the API/ABI is
4882 * likely to change as new drivers are added and updated.
4883 * Do not depend on ABI/API stability.
4886 EXPORT_SYMBOL_GPL(ata_std_bios_param);
4887 EXPORT_SYMBOL_GPL(ata_std_ports);
4888 EXPORT_SYMBOL_GPL(ata_device_add);
4889 EXPORT_SYMBOL_GPL(ata_host_set_remove);
4890 EXPORT_SYMBOL_GPL(ata_sg_init);
4891 EXPORT_SYMBOL_GPL(ata_sg_init_one);
4892 EXPORT_SYMBOL_GPL(__ata_qc_complete);
4893 EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
4894 EXPORT_SYMBOL_GPL(ata_eng_timeout);
4895 EXPORT_SYMBOL_GPL(ata_tf_load);
4896 EXPORT_SYMBOL_GPL(ata_tf_read);
4897 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
4898 EXPORT_SYMBOL_GPL(ata_std_dev_select);
4899 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
4900 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
4901 EXPORT_SYMBOL_GPL(ata_check_status);
4902 EXPORT_SYMBOL_GPL(ata_altstatus);
4903 EXPORT_SYMBOL_GPL(ata_exec_command);
4904 EXPORT_SYMBOL_GPL(ata_port_start);
4905 EXPORT_SYMBOL_GPL(ata_port_stop);
4906 EXPORT_SYMBOL_GPL(ata_host_stop);
4907 EXPORT_SYMBOL_GPL(ata_interrupt);
4908 EXPORT_SYMBOL_GPL(ata_qc_prep);
4909 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
4910 EXPORT_SYMBOL_GPL(ata_bmdma_start);
4911 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
4912 EXPORT_SYMBOL_GPL(ata_bmdma_status);
4913 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
4914 EXPORT_SYMBOL_GPL(ata_port_probe);
4915 EXPORT_SYMBOL_GPL(sata_phy_reset);
4916 EXPORT_SYMBOL_GPL(__sata_phy_reset);
4917 EXPORT_SYMBOL_GPL(ata_bus_reset);
4918 EXPORT_SYMBOL_GPL(ata_std_probeinit);
4919 EXPORT_SYMBOL_GPL(ata_std_softreset);
4920 EXPORT_SYMBOL_GPL(sata_std_hardreset);
4921 EXPORT_SYMBOL_GPL(ata_std_postreset);
4922 EXPORT_SYMBOL_GPL(ata_std_probe_reset);
4923 EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
4924 EXPORT_SYMBOL_GPL(ata_port_disable);
4925 EXPORT_SYMBOL_GPL(ata_ratelimit);
4926 EXPORT_SYMBOL_GPL(ata_busy_sleep);
4927 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
4928 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
4929 EXPORT_SYMBOL_GPL(ata_scsi_timed_out);
4930 EXPORT_SYMBOL_GPL(ata_scsi_error);
4931 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
4932 EXPORT_SYMBOL_GPL(ata_scsi_release);
4933 EXPORT_SYMBOL_GPL(ata_host_intr);
4934 EXPORT_SYMBOL_GPL(ata_dev_classify);
4935 EXPORT_SYMBOL_GPL(ata_dev_id_string);
4936 EXPORT_SYMBOL_GPL(ata_dev_id_c_string);
4937 EXPORT_SYMBOL_GPL(ata_dev_config);
4938 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
4939 EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
4940 EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
4942 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
4943 EXPORT_SYMBOL_GPL(ata_timing_compute);
4944 EXPORT_SYMBOL_GPL(ata_timing_merge);
4947 EXPORT_SYMBOL_GPL(pci_test_config_bits);
4948 EXPORT_SYMBOL_GPL(ata_pci_host_stop);
4949 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
4950 EXPORT_SYMBOL_GPL(ata_pci_init_one);
4951 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
4952 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
4953 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
4954 #endif /* CONFIG_PCI */
4956 EXPORT_SYMBOL_GPL(ata_device_suspend);
4957 EXPORT_SYMBOL_GPL(ata_device_resume);
4958 EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
4959 EXPORT_SYMBOL_GPL(ata_scsi_device_resume);