drivers/scsi/hisi_sas/hisi_sas_v2_hw.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (c) 2016 Linaro Ltd.
   4  * Copyright (c) 2016 Hisilicon Limited.
   5  */
   6
   7 #include "hisi_sas.h"
   8 #define DRV_NAME "hisi_sas_v2_hw"
   9
  10 /* global registers need init*/
  11 #define DLVRY_QUEUE_ENABLE              0x0
  12 #define IOST_BASE_ADDR_LO               0x8
  13 #define IOST_BASE_ADDR_HI               0xc
  14 #define ITCT_BASE_ADDR_LO               0x10
  15 #define ITCT_BASE_ADDR_HI               0x14
  16 #define IO_BROKEN_MSG_ADDR_LO           0x18
  17 #define IO_BROKEN_MSG_ADDR_HI           0x1c
  18 #define PHY_CONTEXT                     0x20
  19 #define PHY_STATE                       0x24
  20 #define PHY_PORT_NUM_MA                 0x28
  21 #define PORT_STATE                      0x2c
  22 #define PORT_STATE_PHY8_PORT_NUM_OFF    16
  23 #define PORT_STATE_PHY8_PORT_NUM_MSK    (0xf << PORT_STATE_PHY8_PORT_NUM_OFF)
  24 #define PORT_STATE_PHY8_CONN_RATE_OFF   20
  25 #define PORT_STATE_PHY8_CONN_RATE_MSK   (0xf << PORT_STATE_PHY8_CONN_RATE_OFF)
  26 #define PHY_CONN_RATE                   0x30
  27 #define HGC_TRANS_TASK_CNT_LIMIT        0x38
  28 #define AXI_AHB_CLK_CFG                 0x3c
  29 #define ITCT_CLR                        0x44
  30 #define ITCT_CLR_EN_OFF                 16
  31 #define ITCT_CLR_EN_MSK                 (0x1 << ITCT_CLR_EN_OFF)
  32 #define ITCT_DEV_OFF                    0
  33 #define ITCT_DEV_MSK                    (0x7ff << ITCT_DEV_OFF)
  34 #define AXI_USER1                       0x48
  35 #define AXI_USER2                       0x4c
  36 #define IO_SATA_BROKEN_MSG_ADDR_LO      0x58
  37 #define IO_SATA_BROKEN_MSG_ADDR_HI      0x5c
  38 #define SATA_INITI_D2H_STORE_ADDR_LO    0x60
  39 #define SATA_INITI_D2H_STORE_ADDR_HI    0x64
  40 #define HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL 0x84
  41 #define HGC_SAS_TXFAIL_RETRY_CTRL       0x88
  42 #define HGC_GET_ITV_TIME                0x90
  43 #define DEVICE_MSG_WORK_MODE            0x94
  44 #define OPENA_WT_CONTI_TIME             0x9c
  45 #define I_T_NEXUS_LOSS_TIME             0xa0
  46 #define MAX_CON_TIME_LIMIT_TIME         0xa4
  47 #define BUS_INACTIVE_LIMIT_TIME         0xa8
  48 #define REJECT_TO_OPEN_LIMIT_TIME       0xac
  49 #define CFG_AGING_TIME                  0xbc
  50 #define HGC_DFX_CFG2                    0xc0
  51 #define HGC_IOMB_PROC1_STATUS   0x104
  52 #define CFG_1US_TIMER_TRSH              0xcc
  53 #define HGC_LM_DFX_STATUS2              0x128
  54 #define HGC_LM_DFX_STATUS2_IOSTLIST_OFF         0
  55 #define HGC_LM_DFX_STATUS2_IOSTLIST_MSK (0xfff << \
  56                                          HGC_LM_DFX_STATUS2_IOSTLIST_OFF)
  57 #define HGC_LM_DFX_STATUS2_ITCTLIST_OFF         12
  58 #define HGC_LM_DFX_STATUS2_ITCTLIST_MSK (0x7ff << \
  59                                          HGC_LM_DFX_STATUS2_ITCTLIST_OFF)
  60 #define HGC_CQE_ECC_ADDR                0x13c
  61 #define HGC_CQE_ECC_1B_ADDR_OFF 0
  62 #define HGC_CQE_ECC_1B_ADDR_MSK (0x3f << HGC_CQE_ECC_1B_ADDR_OFF)
  63 #define HGC_CQE_ECC_MB_ADDR_OFF 8
  64 #define HGC_CQE_ECC_MB_ADDR_MSK (0x3f << HGC_CQE_ECC_MB_ADDR_OFF)
  65 #define HGC_IOST_ECC_ADDR               0x140
  66 #define HGC_IOST_ECC_1B_ADDR_OFF        0
  67 #define HGC_IOST_ECC_1B_ADDR_MSK        (0x3ff << HGC_IOST_ECC_1B_ADDR_OFF)
  68 #define HGC_IOST_ECC_MB_ADDR_OFF        16
  69 #define HGC_IOST_ECC_MB_ADDR_MSK        (0x3ff << HGC_IOST_ECC_MB_ADDR_OFF)
  70 #define HGC_DQE_ECC_ADDR                0x144
  71 #define HGC_DQE_ECC_1B_ADDR_OFF 0
  72 #define HGC_DQE_ECC_1B_ADDR_MSK (0xfff << HGC_DQE_ECC_1B_ADDR_OFF)
  73 #define HGC_DQE_ECC_MB_ADDR_OFF 16
  74 #define HGC_DQE_ECC_MB_ADDR_MSK (0xfff << HGC_DQE_ECC_MB_ADDR_OFF)
  75 #define HGC_INVLD_DQE_INFO              0x148
  76 #define HGC_INVLD_DQE_INFO_FB_CH0_OFF   9
  77 #define HGC_INVLD_DQE_INFO_FB_CH0_MSK   (0x1 << HGC_INVLD_DQE_INFO_FB_CH0_OFF)
  78 #define HGC_INVLD_DQE_INFO_FB_CH3_OFF   18
  79 #define HGC_ITCT_ECC_ADDR               0x150
  80 #define HGC_ITCT_ECC_1B_ADDR_OFF                0
  81 #define HGC_ITCT_ECC_1B_ADDR_MSK                (0x3ff << \
  82                                                  HGC_ITCT_ECC_1B_ADDR_OFF)
  83 #define HGC_ITCT_ECC_MB_ADDR_OFF                16
  84 #define HGC_ITCT_ECC_MB_ADDR_MSK                (0x3ff << \
  85                                                  HGC_ITCT_ECC_MB_ADDR_OFF)
  86 #define HGC_AXI_FIFO_ERR_INFO   0x154
  87 #define AXI_ERR_INFO_OFF                0
  88 #define AXI_ERR_INFO_MSK                (0xff << AXI_ERR_INFO_OFF)
  89 #define FIFO_ERR_INFO_OFF               8
  90 #define FIFO_ERR_INFO_MSK               (0xff << FIFO_ERR_INFO_OFF)
  91 #define INT_COAL_EN                     0x19c
  92 #define OQ_INT_COAL_TIME                0x1a0
  93 #define OQ_INT_COAL_CNT                 0x1a4
  94 #define ENT_INT_COAL_TIME               0x1a8
  95 #define ENT_INT_COAL_CNT                0x1ac
  96 #define OQ_INT_SRC                      0x1b0
  97 #define OQ_INT_SRC_MSK                  0x1b4
  98 #define ENT_INT_SRC1                    0x1b8
  99 #define ENT_INT_SRC1_D2H_FIS_CH0_OFF    0
 100 #define ENT_INT_SRC1_D2H_FIS_CH0_MSK    (0x1 << ENT_INT_SRC1_D2H_FIS_CH0_OFF)
 101 #define ENT_INT_SRC1_D2H_FIS_CH1_OFF    8
 102 #define ENT_INT_SRC1_D2H_FIS_CH1_MSK    (0x1 << ENT_INT_SRC1_D2H_FIS_CH1_OFF)
 103 #define ENT_INT_SRC2                    0x1bc
 104 #define ENT_INT_SRC3                    0x1c0
 105 #define ENT_INT_SRC3_WP_DEPTH_OFF               8
 106 #define ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF      9
 107 #define ENT_INT_SRC3_RP_DEPTH_OFF               10
 108 #define ENT_INT_SRC3_AXI_OFF                    11
 109 #define ENT_INT_SRC3_FIFO_OFF                   12
 110 #define ENT_INT_SRC3_LM_OFF                             14
 111 #define ENT_INT_SRC3_ITC_INT_OFF        15
 112 #define ENT_INT_SRC3_ITC_INT_MSK        (0x1 << ENT_INT_SRC3_ITC_INT_OFF)
 113 #define ENT_INT_SRC3_ABT_OFF            16
 114 #define ENT_INT_SRC_MSK1                0x1c4
 115 #define ENT_INT_SRC_MSK2                0x1c8
 116 #define ENT_INT_SRC_MSK3                0x1cc
 117 #define ENT_INT_SRC_MSK3_ENT95_MSK_OFF  31
 118 #define ENT_INT_SRC_MSK3_ENT95_MSK_MSK  (0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF)
 119 #define SAS_ECC_INTR                    0x1e8
 120 #define SAS_ECC_INTR_DQE_ECC_1B_OFF             0
 121 #define SAS_ECC_INTR_DQE_ECC_MB_OFF             1
 122 #define SAS_ECC_INTR_IOST_ECC_1B_OFF    2
 123 #define SAS_ECC_INTR_IOST_ECC_MB_OFF    3
 124 #define SAS_ECC_INTR_ITCT_ECC_MB_OFF    4
 125 #define SAS_ECC_INTR_ITCT_ECC_1B_OFF    5
 126 #define SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF        6
 127 #define SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF        7
 128 #define SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF        8
 129 #define SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF        9
 130 #define SAS_ECC_INTR_CQE_ECC_1B_OFF             10
 131 #define SAS_ECC_INTR_CQE_ECC_MB_OFF             11
 132 #define SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF        12
 133 #define SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF        13
 134 #define SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF        14
 135 #define SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF        15
 136 #define SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF        16
 137 #define SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF        17
 138 #define SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF        18
 139 #define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF        19
 140 #define SAS_ECC_INTR_MSK                0x1ec
 141 #define HGC_ERR_STAT_EN                 0x238
 142 #define CQE_SEND_CNT                    0x248
 143 #define DLVRY_Q_0_BASE_ADDR_LO          0x260
 144 #define DLVRY_Q_0_BASE_ADDR_HI          0x264
 145 #define DLVRY_Q_0_DEPTH                 0x268
 146 #define DLVRY_Q_0_WR_PTR                0x26c
 147 #define DLVRY_Q_0_RD_PTR                0x270
 148 #define HYPER_STREAM_ID_EN_CFG          0xc80
 149 #define OQ0_INT_SRC_MSK                 0xc90
 150 #define COMPL_Q_0_BASE_ADDR_LO          0x4e0
 151 #define COMPL_Q_0_BASE_ADDR_HI          0x4e4
 152 #define COMPL_Q_0_DEPTH                 0x4e8
 153 #define COMPL_Q_0_WR_PTR                0x4ec
 154 #define COMPL_Q_0_RD_PTR                0x4f0
 155 #define HGC_RXM_DFX_STATUS14    0xae8
 156 #define HGC_RXM_DFX_STATUS14_MEM0_OFF           0
 157 #define HGC_RXM_DFX_STATUS14_MEM0_MSK           (0x1ff << \
 158                                                  HGC_RXM_DFX_STATUS14_MEM0_OFF)
 159 #define HGC_RXM_DFX_STATUS14_MEM1_OFF           9
 160 #define HGC_RXM_DFX_STATUS14_MEM1_MSK           (0x1ff << \
 161                                                  HGC_RXM_DFX_STATUS14_MEM1_OFF)
 162 #define HGC_RXM_DFX_STATUS14_MEM2_OFF           18
 163 #define HGC_RXM_DFX_STATUS14_MEM2_MSK           (0x1ff << \
 164                                                  HGC_RXM_DFX_STATUS14_MEM2_OFF)
 165 #define HGC_RXM_DFX_STATUS15    0xaec
 166 #define HGC_RXM_DFX_STATUS15_MEM3_OFF           0
 167 #define HGC_RXM_DFX_STATUS15_MEM3_MSK           (0x1ff << \
 168                                                  HGC_RXM_DFX_STATUS15_MEM3_OFF)
 169 /* phy registers need init */
 170 #define PORT_BASE                       (0x2000)
 171
 172 #define PHY_CFG                         (PORT_BASE + 0x0)
 173 #define HARD_PHY_LINKRATE               (PORT_BASE + 0x4)
 174 #define PHY_CFG_ENA_OFF                 0
 175 #define PHY_CFG_ENA_MSK                 (0x1 << PHY_CFG_ENA_OFF)
 176 #define PHY_CFG_DC_OPT_OFF              2
 177 #define PHY_CFG_DC_OPT_MSK              (0x1 << PHY_CFG_DC_OPT_OFF)
 178 #define PROG_PHY_LINK_RATE              (PORT_BASE + 0x8)
 179 #define PROG_PHY_LINK_RATE_MAX_OFF      0
 180 #define PROG_PHY_LINK_RATE_MAX_MSK      (0xff << PROG_PHY_LINK_RATE_MAX_OFF)
 181 #define PHY_CTRL                        (PORT_BASE + 0x14)
 182 #define PHY_CTRL_RESET_OFF              0
 183 #define PHY_CTRL_RESET_MSK              (0x1 << PHY_CTRL_RESET_OFF)
 184 #define SAS_PHY_CTRL                    (PORT_BASE + 0x20)
 185 #define SL_CFG                          (PORT_BASE + 0x84)
 186 #define PHY_PCN                         (PORT_BASE + 0x44)
 187 #define SL_TOUT_CFG                     (PORT_BASE + 0x8c)
 188 #define SL_CONTROL                      (PORT_BASE + 0x94)
 189 #define SL_CONTROL_NOTIFY_EN_OFF        0
 190 #define SL_CONTROL_NOTIFY_EN_MSK        (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
 191 #define SL_CONTROL_CTA_OFF              17
 192 #define SL_CONTROL_CTA_MSK              (0x1 << SL_CONTROL_CTA_OFF)
 193 #define RX_PRIMS_STATUS                 (PORT_BASE + 0x98)
 194 #define RX_BCAST_CHG_OFF                1
 195 #define RX_BCAST_CHG_MSK                (0x1 << RX_BCAST_CHG_OFF)
 196 #define TX_ID_DWORD0                    (PORT_BASE + 0x9c)
 197 #define TX_ID_DWORD1                    (PORT_BASE + 0xa0)
 198 #define TX_ID_DWORD2                    (PORT_BASE + 0xa4)
 199 #define TX_ID_DWORD3                    (PORT_BASE + 0xa8)
 200 #define TX_ID_DWORD4                    (PORT_BASE + 0xaC)
 201 #define TX_ID_DWORD5                    (PORT_BASE + 0xb0)
 202 #define TX_ID_DWORD6                    (PORT_BASE + 0xb4)
 203 #define TXID_AUTO                       (PORT_BASE + 0xb8)
 204 #define TXID_AUTO_CT3_OFF               1
 205 #define TXID_AUTO_CT3_MSK               (0x1 << TXID_AUTO_CT3_OFF)
 206 #define TXID_AUTO_CTB_OFF               11
 207 #define TXID_AUTO_CTB_MSK               (0x1 << TXID_AUTO_CTB_OFF)
 208 #define TX_HARDRST_OFF                  2
 209 #define TX_HARDRST_MSK                  (0x1 << TX_HARDRST_OFF)
 210 #define RX_IDAF_DWORD0                  (PORT_BASE + 0xc4)
 211 #define RX_IDAF_DWORD1                  (PORT_BASE + 0xc8)
 212 #define RX_IDAF_DWORD2                  (PORT_BASE + 0xcc)
 213 #define RX_IDAF_DWORD3                  (PORT_BASE + 0xd0)
 214 #define RX_IDAF_DWORD4                  (PORT_BASE + 0xd4)
 215 #define RX_IDAF_DWORD5                  (PORT_BASE + 0xd8)
 216 #define RX_IDAF_DWORD6                  (PORT_BASE + 0xdc)
 217 #define RXOP_CHECK_CFG_H                (PORT_BASE + 0xfc)
 218 #define CON_CONTROL                     (PORT_BASE + 0x118)
 219 #define CON_CONTROL_CFG_OPEN_ACC_STP_OFF        0
 220 #define CON_CONTROL_CFG_OPEN_ACC_STP_MSK        \
 221                 (0x01 << CON_CONTROL_CFG_OPEN_ACC_STP_OFF)
 222 #define DONE_RECEIVED_TIME              (PORT_BASE + 0x11c)
 223 #define CHL_INT0                        (PORT_BASE + 0x1b4)
 224 #define CHL_INT0_HOTPLUG_TOUT_OFF       0
 225 #define CHL_INT0_HOTPLUG_TOUT_MSK       (0x1 << CHL_INT0_HOTPLUG_TOUT_OFF)
 226 #define CHL_INT0_SL_RX_BCST_ACK_OFF     1
 227 #define CHL_INT0_SL_RX_BCST_ACK_MSK     (0x1 << CHL_INT0_SL_RX_BCST_ACK_OFF)
 228 #define CHL_INT0_SL_PHY_ENABLE_OFF      2
 229 #define CHL_INT0_SL_PHY_ENABLE_MSK      (0x1 << CHL_INT0_SL_PHY_ENABLE_OFF)
 230 #define CHL_INT0_NOT_RDY_OFF            4
 231 #define CHL_INT0_NOT_RDY_MSK            (0x1 << CHL_INT0_NOT_RDY_OFF)
 232 #define CHL_INT0_PHY_RDY_OFF            5
 233 #define CHL_INT0_PHY_RDY_MSK            (0x1 << CHL_INT0_PHY_RDY_OFF)
 234 #define CHL_INT1                        (PORT_BASE + 0x1b8)
 235 #define CHL_INT1_DMAC_TX_ECC_ERR_OFF    15
 236 #define CHL_INT1_DMAC_TX_ECC_ERR_MSK    (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF)
 237 #define CHL_INT1_DMAC_RX_ECC_ERR_OFF    17
 238 #define CHL_INT1_DMAC_RX_ECC_ERR_MSK    (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF)
 239 #define CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF 19
 240 #define CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF 20
 241 #define CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF 21
 242 #define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22
 243 #define CHL_INT2                        (PORT_BASE + 0x1bc)
 244 #define CHL_INT2_SL_IDAF_TOUT_CONF_OFF  0
 245 #define CHL_INT0_MSK                    (PORT_BASE + 0x1c0)
 246 #define CHL_INT1_MSK                    (PORT_BASE + 0x1c4)
 247 #define CHL_INT2_MSK                    (PORT_BASE + 0x1c8)
 248 #define CHL_INT_COAL_EN                 (PORT_BASE + 0x1d0)
 249 #define DMA_TX_DFX0                             (PORT_BASE + 0x200)
 250 #define DMA_TX_DFX1                             (PORT_BASE + 0x204)
 251 #define DMA_TX_DFX1_IPTT_OFF            0
 252 #define DMA_TX_DFX1_IPTT_MSK            (0xffff << DMA_TX_DFX1_IPTT_OFF)
 253 #define DMA_TX_FIFO_DFX0                (PORT_BASE + 0x240)
 254 #define PORT_DFX0                               (PORT_BASE + 0x258)
 255 #define LINK_DFX2                                       (PORT_BASE + 0X264)
 256 #define LINK_DFX2_RCVR_HOLD_STS_OFF     9
 257 #define LINK_DFX2_RCVR_HOLD_STS_MSK     (0x1 << LINK_DFX2_RCVR_HOLD_STS_OFF)
 258 #define LINK_DFX2_SEND_HOLD_STS_OFF     10
 259 #define LINK_DFX2_SEND_HOLD_STS_MSK     (0x1 << LINK_DFX2_SEND_HOLD_STS_OFF)
 260 #define SAS_ERR_CNT4_REG                (PORT_BASE + 0x290)
 261 #define SAS_ERR_CNT6_REG                (PORT_BASE + 0x298)
 262 #define PHY_CTRL_RDY_MSK                (PORT_BASE + 0x2b0)
 263 #define PHYCTRL_NOT_RDY_MSK             (PORT_BASE + 0x2b4)
 264 #define PHYCTRL_DWS_RESET_MSK           (PORT_BASE + 0x2b8)
 265 #define PHYCTRL_PHY_ENA_MSK             (PORT_BASE + 0x2bc)
 266 #define SL_RX_BCAST_CHK_MSK             (PORT_BASE + 0x2c0)
 267 #define PHYCTRL_OOB_RESTART_MSK         (PORT_BASE + 0x2c4)
 268 #define DMA_TX_STATUS                   (PORT_BASE + 0x2d0)
 269 #define DMA_TX_STATUS_BUSY_OFF          0
 270 #define DMA_TX_STATUS_BUSY_MSK          (0x1 << DMA_TX_STATUS_BUSY_OFF)
 271 #define DMA_RX_STATUS                   (PORT_BASE + 0x2e8)
 272 #define DMA_RX_STATUS_BUSY_OFF          0
 273 #define DMA_RX_STATUS_BUSY_MSK          (0x1 << DMA_RX_STATUS_BUSY_OFF)
 274
 275 #define AXI_CFG                         (0x5100)
 276 #define AM_CFG_MAX_TRANS                (0x5010)
 277 #define AM_CFG_SINGLE_PORT_MAX_TRANS    (0x5014)
 278
 279 #define AXI_MASTER_CFG_BASE             (0x5000)
 280 #define AM_CTRL_GLOBAL                  (0x0)
 281 #define AM_CURR_TRANS_RETURN    (0x150)
 282
 283 /* HW dma structures */
 284 /* Delivery queue header */
 285 /* dw0 */
 286 #define CMD_HDR_ABORT_FLAG_OFF          0
 287 #define CMD_HDR_ABORT_FLAG_MSK          (0x3 << CMD_HDR_ABORT_FLAG_OFF)
 288 #define CMD_HDR_ABORT_DEVICE_TYPE_OFF   2
 289 #define CMD_HDR_ABORT_DEVICE_TYPE_MSK   (0x1 << CMD_HDR_ABORT_DEVICE_TYPE_OFF)
 290 #define CMD_HDR_RESP_REPORT_OFF         5
 291 #define CMD_HDR_RESP_REPORT_MSK         (0x1 << CMD_HDR_RESP_REPORT_OFF)
 292 #define CMD_HDR_TLR_CTRL_OFF            6
 293 #define CMD_HDR_TLR_CTRL_MSK            (0x3 << CMD_HDR_TLR_CTRL_OFF)
 294 #define CMD_HDR_PHY_ID_OFF              8
 295 #define CMD_HDR_PHY_ID_MSK              (0x1ff << CMD_HDR_PHY_ID_OFF)
 296 #define CMD_HDR_FORCE_PHY_OFF           17
 297 #define CMD_HDR_FORCE_PHY_MSK           (0x1 << CMD_HDR_FORCE_PHY_OFF)
 298 #define CMD_HDR_PORT_OFF                18
 299 #define CMD_HDR_PORT_MSK                (0xf << CMD_HDR_PORT_OFF)
 300 #define CMD_HDR_PRIORITY_OFF            27
 301 #define CMD_HDR_PRIORITY_MSK            (0x1 << CMD_HDR_PRIORITY_OFF)
 302 #define CMD_HDR_CMD_OFF                 29
 303 #define CMD_HDR_CMD_MSK                 (0x7 << CMD_HDR_CMD_OFF)
 304 /* dw1 */
 305 #define CMD_HDR_DIR_OFF                 5
 306 #define CMD_HDR_DIR_MSK                 (0x3 << CMD_HDR_DIR_OFF)
 307 #define CMD_HDR_RESET_OFF               7
 308 #define CMD_HDR_RESET_MSK               (0x1 << CMD_HDR_RESET_OFF)
 309 #define CMD_HDR_VDTL_OFF                10
 310 #define CMD_HDR_VDTL_MSK                (0x1 << CMD_HDR_VDTL_OFF)
 311 #define CMD_HDR_FRAME_TYPE_OFF          11
 312 #define CMD_HDR_FRAME_TYPE_MSK          (0x1f << CMD_HDR_FRAME_TYPE_OFF)
 313 #define CMD_HDR_DEV_ID_OFF              16
 314 #define CMD_HDR_DEV_ID_MSK              (0xffff << CMD_HDR_DEV_ID_OFF)
 315 /* dw2 */
 316 #define CMD_HDR_CFL_OFF                 0
 317 #define CMD_HDR_CFL_MSK                 (0x1ff << CMD_HDR_CFL_OFF)
 318 #define CMD_HDR_NCQ_TAG_OFF             10
 319 #define CMD_HDR_NCQ_TAG_MSK             (0x1f << CMD_HDR_NCQ_TAG_OFF)
 320 #define CMD_HDR_MRFL_OFF                15
 321 #define CMD_HDR_MRFL_MSK                (0x1ff << CMD_HDR_MRFL_OFF)
 322 #define CMD_HDR_SG_MOD_OFF              24
 323 #define CMD_HDR_SG_MOD_MSK              (0x3 << CMD_HDR_SG_MOD_OFF)
 324 #define CMD_HDR_FIRST_BURST_OFF         26
 325 #define CMD_HDR_FIRST_BURST_MSK         (0x1 << CMD_HDR_SG_MOD_OFF)
 326 /* dw3 */
 327 #define CMD_HDR_IPTT_OFF                0
 328 #define CMD_HDR_IPTT_MSK                (0xffff << CMD_HDR_IPTT_OFF)
 329 /* dw6 */
 330 #define CMD_HDR_DIF_SGL_LEN_OFF         0
 331 #define CMD_HDR_DIF_SGL_LEN_MSK         (0xffff << CMD_HDR_DIF_SGL_LEN_OFF)
 332 #define CMD_HDR_DATA_SGL_LEN_OFF        16
 333 #define CMD_HDR_DATA_SGL_LEN_MSK        (0xffff << CMD_HDR_DATA_SGL_LEN_OFF)
 334 #define CMD_HDR_ABORT_IPTT_OFF          16
 335 #define CMD_HDR_ABORT_IPTT_MSK          (0xffff << CMD_HDR_ABORT_IPTT_OFF)
 336
 337 /* Completion header */
 338 /* dw0 */
 339 #define CMPLT_HDR_ERR_PHASE_OFF 2
 340 #define CMPLT_HDR_ERR_PHASE_MSK (0xff << CMPLT_HDR_ERR_PHASE_OFF)
 341 #define CMPLT_HDR_RSPNS_XFRD_OFF        10
 342 #define CMPLT_HDR_RSPNS_XFRD_MSK        (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
 343 #define CMPLT_HDR_ERX_OFF               12
 344 #define CMPLT_HDR_ERX_MSK               (0x1 << CMPLT_HDR_ERX_OFF)
 345 #define CMPLT_HDR_ABORT_STAT_OFF        13
 346 #define CMPLT_HDR_ABORT_STAT_MSK        (0x7 << CMPLT_HDR_ABORT_STAT_OFF)
 347 /* abort_stat */
 348 #define STAT_IO_NOT_VALID               0x1
 349 #define STAT_IO_NO_DEVICE               0x2
 350 #define STAT_IO_COMPLETE                0x3
 351 #define STAT_IO_ABORTED                 0x4
 352 /* dw1 */
 353 #define CMPLT_HDR_IPTT_OFF              0
 354 #define CMPLT_HDR_IPTT_MSK              (0xffff << CMPLT_HDR_IPTT_OFF)
 355 #define CMPLT_HDR_DEV_ID_OFF            16
 356 #define CMPLT_HDR_DEV_ID_MSK            (0xffff << CMPLT_HDR_DEV_ID_OFF)
 357
 358 /* ITCT header */
 359 /* qw0 */
 360 #define ITCT_HDR_DEV_TYPE_OFF           0
 361 #define ITCT_HDR_DEV_TYPE_MSK           (0x3 << ITCT_HDR_DEV_TYPE_OFF)
 362 #define ITCT_HDR_VALID_OFF              2
 363 #define ITCT_HDR_VALID_MSK              (0x1 << ITCT_HDR_VALID_OFF)
 364 #define ITCT_HDR_MCR_OFF                5
 365 #define ITCT_HDR_MCR_MSK                (0xf << ITCT_HDR_MCR_OFF)
 366 #define ITCT_HDR_VLN_OFF                9
 367 #define ITCT_HDR_VLN_MSK                (0xf << ITCT_HDR_VLN_OFF)
 368 #define ITCT_HDR_SMP_TIMEOUT_OFF        16
 369 #define ITCT_HDR_SMP_TIMEOUT_8US        1
 370 #define ITCT_HDR_SMP_TIMEOUT            (ITCT_HDR_SMP_TIMEOUT_8US * \
 371                                          250) /* 2ms */
 372 #define ITCT_HDR_AWT_CONTINUE_OFF       25
 373 #define ITCT_HDR_PORT_ID_OFF            28
 374 #define ITCT_HDR_PORT_ID_MSK            (0xf << ITCT_HDR_PORT_ID_OFF)
 375 /* qw2 */
 376 #define ITCT_HDR_INLT_OFF               0
 377 #define ITCT_HDR_INLT_MSK               (0xffffULL << ITCT_HDR_INLT_OFF)
 378 #define ITCT_HDR_BITLT_OFF              16
 379 #define ITCT_HDR_BITLT_MSK              (0xffffULL << ITCT_HDR_BITLT_OFF)
 380 #define ITCT_HDR_MCTLT_OFF              32
 381 #define ITCT_HDR_MCTLT_MSK              (0xffffULL << ITCT_HDR_MCTLT_OFF)
 382 #define ITCT_HDR_RTOLT_OFF              48
 383 #define ITCT_HDR_RTOLT_MSK              (0xffffULL << ITCT_HDR_RTOLT_OFF)
 384
 385 #define HISI_SAS_FATAL_INT_NR   2
 386
 387 struct hisi_sas_complete_v2_hdr {
 388         __le32 dw0;
 389         __le32 dw1;
 390         __le32 act;
 391         __le32 dw3;
 392 };
 393
 394 struct hisi_sas_err_record_v2 {
 395         /* dw0 */
 396         __le32 trans_tx_fail_type;
 397
 398         /* dw1 */
 399         __le32 trans_rx_fail_type;
 400
 401         /* dw2 */
 402         __le16 dma_tx_err_type;
 403         __le16 sipc_rx_err_type;
 404
 405         /* dw3 */
 406         __le32 dma_rx_err_type;
 407 };
 408
 409 struct signal_attenuation_s {
 410         u32 de_emphasis;
 411         u32 preshoot;
 412         u32 boost;
 413 };
 414
 415 struct sig_atten_lu_s {
 416         const struct signal_attenuation_s *att;
 417         u32 sas_phy_ctrl;
 418 };
 419
 420 static const struct hisi_sas_hw_error one_bit_ecc_errors[] = {
 421         {
 422                 .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF),
 423                 .msk = HGC_DQE_ECC_1B_ADDR_MSK,
 424                 .shift = HGC_DQE_ECC_1B_ADDR_OFF,
 425                 .msg = "hgc_dqe_ecc1b_intr",
 426                 .reg = HGC_DQE_ECC_ADDR,
 427         },
 428         {
 429                 .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF),
 430                 .msk = HGC_IOST_ECC_1B_ADDR_MSK,
 431                 .shift = HGC_IOST_ECC_1B_ADDR_OFF,
 432                 .msg = "hgc_iost_ecc1b_intr",
 433                 .reg = HGC_IOST_ECC_ADDR,
 434         },
 435         {
 436                 .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF),
 437                 .msk = HGC_ITCT_ECC_1B_ADDR_MSK,
 438                 .shift = HGC_ITCT_ECC_1B_ADDR_OFF,
 439                 .msg = "hgc_itct_ecc1b_intr",
 440                 .reg = HGC_ITCT_ECC_ADDR,
 441         },
 442         {
 443                 .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF),
 444                 .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
 445                 .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
 446                 .msg = "hgc_iostl_ecc1b_intr",
 447                 .reg = HGC_LM_DFX_STATUS2,
 448         },
 449         {
 450                 .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF),
 451                 .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
 452                 .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
 453                 .msg = "hgc_itctl_ecc1b_intr",
 454                 .reg = HGC_LM_DFX_STATUS2,
 455         },
 456         {
 457                 .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF),
 458                 .msk = HGC_CQE_ECC_1B_ADDR_MSK,
 459                 .shift = HGC_CQE_ECC_1B_ADDR_OFF,
 460                 .msg = "hgc_cqe_ecc1b_intr",
 461                 .reg = HGC_CQE_ECC_ADDR,
 462         },
 463         {
 464                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF),
 465                 .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
 466                 .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
 467                 .msg = "rxm_mem0_ecc1b_intr",
 468                 .reg = HGC_RXM_DFX_STATUS14,
 469         },
 470         {
 471                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF),
 472                 .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
 473                 .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
 474                 .msg = "rxm_mem1_ecc1b_intr",
 475                 .reg = HGC_RXM_DFX_STATUS14,
 476         },
 477         {
 478                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF),
 479                 .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
 480                 .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
 481                 .msg = "rxm_mem2_ecc1b_intr",
 482                 .reg = HGC_RXM_DFX_STATUS14,
 483         },
 484         {
 485                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF),
 486                 .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
 487                 .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
 488                 .msg = "rxm_mem3_ecc1b_intr",
 489                 .reg = HGC_RXM_DFX_STATUS15,
 490         },
 491 };
 492
 493 static const struct hisi_sas_hw_error multi_bit_ecc_errors[] = {
 494         {
 495                 .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF),
 496                 .msk = HGC_DQE_ECC_MB_ADDR_MSK,
 497                 .shift = HGC_DQE_ECC_MB_ADDR_OFF,
 498                 .msg = "hgc_dqe_eccbad_intr",
 499                 .reg = HGC_DQE_ECC_ADDR,
 500         },
 501         {
 502                 .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF),
 503                 .msk = HGC_IOST_ECC_MB_ADDR_MSK,
 504                 .shift = HGC_IOST_ECC_MB_ADDR_OFF,
 505                 .msg = "hgc_iost_eccbad_intr",
 506                 .reg = HGC_IOST_ECC_ADDR,
 507         },
 508         {
 509                 .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF),
 510                 .msk = HGC_ITCT_ECC_MB_ADDR_MSK,
 511                 .shift = HGC_ITCT_ECC_MB_ADDR_OFF,
 512                 .msg = "hgc_itct_eccbad_intr",
 513                 .reg = HGC_ITCT_ECC_ADDR,
 514         },
 515         {
 516                 .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF),
 517                 .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
 518                 .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
 519                 .msg = "hgc_iostl_eccbad_intr",
 520                 .reg = HGC_LM_DFX_STATUS2,
 521         },
 522         {
 523                 .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF),
 524                 .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
 525                 .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
 526                 .msg = "hgc_itctl_eccbad_intr",
 527                 .reg = HGC_LM_DFX_STATUS2,
 528         },
 529         {
 530                 .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF),
 531                 .msk = HGC_CQE_ECC_MB_ADDR_MSK,
 532                 .shift = HGC_CQE_ECC_MB_ADDR_OFF,
 533                 .msg = "hgc_cqe_eccbad_intr",
 534                 .reg = HGC_CQE_ECC_ADDR,
 535         },
 536         {
 537                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF),
 538                 .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
 539                 .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
 540                 .msg = "rxm_mem0_eccbad_intr",
 541                 .reg = HGC_RXM_DFX_STATUS14,
 542         },
 543         {
 544                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF),
 545                 .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
 546                 .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
 547                 .msg = "rxm_mem1_eccbad_intr",
 548                 .reg = HGC_RXM_DFX_STATUS14,
 549         },
 550         {
 551                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF),
 552                 .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
 553                 .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
 554                 .msg = "rxm_mem2_eccbad_intr",
 555                 .reg = HGC_RXM_DFX_STATUS14,
 556         },
 557         {
 558                 .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF),
 559                 .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
 560                 .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
 561                 .msg = "rxm_mem3_eccbad_intr",
 562                 .reg = HGC_RXM_DFX_STATUS15,
 563         },
 564 };
 565
 566 enum {
 567         HISI_SAS_PHY_PHY_UPDOWN,
 568         HISI_SAS_PHY_CHNL_INT,
 569         HISI_SAS_PHY_INT_NR
 570 };
 571
 572 enum {
 573         TRANS_TX_FAIL_BASE = 0x0, /* dw0 */
 574         TRANS_RX_FAIL_BASE = 0x20, /* dw1 */
 575         DMA_TX_ERR_BASE = 0x40, /* dw2 bit 15-0 */
 576         SIPC_RX_ERR_BASE = 0x50, /* dw2 bit 31-16*/
 577         DMA_RX_ERR_BASE = 0x60, /* dw3 */
 578
 579         /* trans tx*/
 580         TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS = TRANS_TX_FAIL_BASE, /* 0x0 */
 581         TRANS_TX_ERR_PHY_NOT_ENABLE, /* 0x1 */
 582         TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION, /* 0x2 */
 583         TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION, /* 0x3 */
 584         TRANS_TX_OPEN_CNX_ERR_BY_OTHER, /* 0x4 */
 585         RESERVED0, /* 0x5 */
 586         TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT, /* 0x6 */
 587         TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY, /* 0x7 */
 588         TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED, /* 0x8 */
 589         TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED, /* 0x9 */
 590         TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION, /* 0xa */
 591         TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD, /* 0xb */
 592         TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER, /* 0xc */
 593         TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED, /* 0xd */
 594         TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT, /* 0xe */
 595         TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION, /* 0xf */
 596         TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED, /* 0x10 */
 597         TRANS_TX_ERR_FRAME_TXED, /* 0x11 */
 598         TRANS_TX_ERR_WITH_BREAK_TIMEOUT, /* 0x12 */
 599         TRANS_TX_ERR_WITH_BREAK_REQUEST, /* 0x13 */
 600         TRANS_TX_ERR_WITH_BREAK_RECEVIED, /* 0x14 */
 601         TRANS_TX_ERR_WITH_CLOSE_TIMEOUT, /* 0x15 */
 602         TRANS_TX_ERR_WITH_CLOSE_NORMAL, /* 0x16 for ssp*/
 603         TRANS_TX_ERR_WITH_CLOSE_PHYDISALE, /* 0x17 */
 604         TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x18 */
 605         TRANS_TX_ERR_WITH_CLOSE_COMINIT, /* 0x19 */
 606         TRANS_TX_ERR_WITH_NAK_RECEVIED, /* 0x1a for ssp*/
 607         TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT, /* 0x1b for ssp*/
 608         /*IO_TX_ERR_WITH_R_ERR_RECEVIED, [> 0x1b for sata/stp<] */
 609         TRANS_TX_ERR_WITH_CREDIT_TIMEOUT, /* 0x1c for ssp */
 610         /*IO_RX_ERR_WITH_SATA_DEVICE_LOST 0x1c for sata/stp */
 611         TRANS_TX_ERR_WITH_IPTT_CONFLICT, /* 0x1d for ssp/smp */
 612         TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS, /* 0x1e */
 613         /*IO_TX_ERR_WITH_SYNC_RXD, [> 0x1e <] for sata/stp */
 614         TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT, /* 0x1f for sata/stp */
 615
 616         /* trans rx */
 617         TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x20 */
 618         TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR, /* 0x21 for sata/stp */
 619         TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM, /* 0x22 for ssp/smp */
 620         /*IO_ERR_WITH_RXFIS_8B10B_CODE_ERR, [> 0x22 <] for sata/stp */
 621         TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR, /* 0x23 for sata/stp */
 622         TRANS_RX_ERR_WITH_RXFIS_CRC_ERR, /* 0x24 for sata/stp */
 623         TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN, /* 0x25 for smp */
 624         /*IO_ERR_WITH_RXFIS_TX SYNCP, [> 0x25 <] for sata/stp */
 625         TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP, /* 0x26 for sata/stp*/
 626         TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN, /* 0x27 */
 627         TRANS_RX_ERR_WITH_BREAK_TIMEOUT, /* 0x28 */
 628         TRANS_RX_ERR_WITH_BREAK_REQUEST, /* 0x29 */
 629         TRANS_RX_ERR_WITH_BREAK_RECEVIED, /* 0x2a */
 630         RESERVED1, /* 0x2b */
 631         TRANS_RX_ERR_WITH_CLOSE_NORMAL, /* 0x2c */
 632         TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE, /* 0x2d */
 633         TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x2e */
 634         TRANS_RX_ERR_WITH_CLOSE_COMINIT, /* 0x2f */
 635         TRANS_RX_ERR_WITH_DATA_LEN0, /* 0x30 for ssp/smp */
 636         TRANS_RX_ERR_WITH_BAD_HASH, /* 0x31 for ssp */
 637         /*IO_RX_ERR_WITH_FIS_TOO_SHORT, [> 0x31 <] for sata/stp */
 638         TRANS_RX_XRDY_WLEN_ZERO_ERR, /* 0x32 for ssp*/
 639         /*IO_RX_ERR_WITH_FIS_TOO_LONG, [> 0x32 <] for sata/stp */
 640         TRANS_RX_SSP_FRM_LEN_ERR, /* 0x33 for ssp */
 641         /*IO_RX_ERR_WITH_SATA_DEVICE_LOST, [> 0x33 <] for sata */
 642         RESERVED2, /* 0x34 */
 643         RESERVED3, /* 0x35 */
 644         RESERVED4, /* 0x36 */
 645         RESERVED5, /* 0x37 */
 646         TRANS_RX_ERR_WITH_BAD_FRM_TYPE, /* 0x38 */
 647         TRANS_RX_SMP_FRM_LEN_ERR, /* 0x39 */
 648         TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x3a */
 649         RESERVED6, /* 0x3b */
 650         RESERVED7, /* 0x3c */
 651         RESERVED8, /* 0x3d */
 652         RESERVED9, /* 0x3e */
 653         TRANS_RX_R_ERR, /* 0x3f */
 654
 655         /* dma tx */
 656         DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x40 */
 657         DMA_TX_DIF_APP_ERR, /* 0x41 */
 658         DMA_TX_DIF_RPP_ERR, /* 0x42 */
 659         DMA_TX_DATA_SGL_OVERFLOW, /* 0x43 */
 660         DMA_TX_DIF_SGL_OVERFLOW, /* 0x44 */
 661         DMA_TX_UNEXP_XFER_ERR, /* 0x45 */
 662         DMA_TX_UNEXP_RETRANS_ERR, /* 0x46 */
 663         DMA_TX_XFER_LEN_OVERFLOW, /* 0x47 */
 664         DMA_TX_XFER_OFFSET_ERR, /* 0x48 */
 665         DMA_TX_RAM_ECC_ERR, /* 0x49 */
 666         DMA_TX_DIF_LEN_ALIGN_ERR, /* 0x4a */
 667         DMA_TX_MAX_ERR_CODE,
 668
 669         /* sipc rx */
 670         SIPC_RX_FIS_STATUS_ERR_BIT_VLD = SIPC_RX_ERR_BASE, /* 0x50 */
 671         SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR, /* 0x51 */
 672         SIPC_RX_FIS_STATUS_BSY_BIT_ERR, /* 0x52 */
 673         SIPC_RX_WRSETUP_LEN_ODD_ERR, /* 0x53 */
 674         SIPC_RX_WRSETUP_LEN_ZERO_ERR, /* 0x54 */
 675         SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR, /* 0x55 */
 676         SIPC_RX_NCQ_WRSETUP_OFFSET_ERR, /* 0x56 */
 677         SIPC_RX_NCQ_WRSETUP_AUTO_ACTIVE_ERR, /* 0x57 */
 678         SIPC_RX_SATA_UNEXP_FIS_ERR, /* 0x58 */
 679         SIPC_RX_WRSETUP_ESTATUS_ERR, /* 0x59 */
 680         SIPC_RX_DATA_UNDERFLOW_ERR, /* 0x5a */
 681         SIPC_RX_MAX_ERR_CODE,
 682
 683         /* dma rx */
 684         DMA_RX_DIF_CRC_ERR = DMA_RX_ERR_BASE, /* 0x60 */
 685         DMA_RX_DIF_APP_ERR, /* 0x61 */
 686         DMA_RX_DIF_RPP_ERR, /* 0x62 */
 687         DMA_RX_DATA_SGL_OVERFLOW, /* 0x63 */
 688         DMA_RX_DIF_SGL_OVERFLOW, /* 0x64 */
 689         DMA_RX_DATA_LEN_OVERFLOW, /* 0x65 */
 690         DMA_RX_DATA_LEN_UNDERFLOW, /* 0x66 */
 691         DMA_RX_DATA_OFFSET_ERR, /* 0x67 */
 692         RESERVED10, /* 0x68 */
 693         DMA_RX_SATA_FRAME_TYPE_ERR, /* 0x69 */
 694         DMA_RX_RESP_BUF_OVERFLOW, /* 0x6a */
 695         DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x6b */
 696         DMA_RX_UNEXP_NORM_RESP_ERR, /* 0x6c */
 697         DMA_RX_UNEXP_RDFRAME_ERR, /* 0x6d */
 698         DMA_RX_PIO_DATA_LEN_ERR, /* 0x6e */
 699         DMA_RX_RDSETUP_STATUS_ERR, /* 0x6f */
 700         DMA_RX_RDSETUP_STATUS_DRQ_ERR, /* 0x70 */
 701         DMA_RX_RDSETUP_STATUS_BSY_ERR, /* 0x71 */
 702         DMA_RX_RDSETUP_LEN_ODD_ERR, /* 0x72 */
 703         DMA_RX_RDSETUP_LEN_ZERO_ERR, /* 0x73 */
 704         DMA_RX_RDSETUP_LEN_OVER_ERR, /* 0x74 */
 705         DMA_RX_RDSETUP_OFFSET_ERR, /* 0x75 */
 706         DMA_RX_RDSETUP_ACTIVE_ERR, /* 0x76 */
 707         DMA_RX_RDSETUP_ESTATUS_ERR, /* 0x77 */
 708         DMA_RX_RAM_ECC_ERR, /* 0x78 */
 709         DMA_RX_UNKNOWN_FRM_ERR, /* 0x79 */
 710         DMA_RX_MAX_ERR_CODE,
 711 };
 712
 713 #define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096
 714 #define HISI_MAX_SATA_SUPPORT_V2_HW     (HISI_SAS_COMMAND_ENTRIES_V2_HW/64 - 1)
 715
 716 #define DIR_NO_DATA 0
 717 #define DIR_TO_INI 1
 718 #define DIR_TO_DEVICE 2
 719 #define DIR_RESERVED 3
 720
 721 #define ERR_ON_TX_PHASE(err_phase) (err_phase == 0x2 || \
 722                 err_phase == 0x4 || err_phase == 0x8 ||\
 723                 err_phase == 0x6 || err_phase == 0xa)
 724 #define ERR_ON_RX_PHASE(err_phase) (err_phase == 0x10 || \
 725                 err_phase == 0x20 || err_phase == 0x40)
 726
 727 static void link_timeout_disable_link(struct timer_list *t);
 728
 729 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
 730 {
 731         void __iomem *regs = hisi_hba->regs + off;
 732
 733         return readl(regs);
 734 }
 735
 736 static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
 737 {
 738         void __iomem *regs = hisi_hba->regs + off;
 739
 740         return readl_relaxed(regs);
 741 }
 742
 743 static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val)
 744 {
 745         void __iomem *regs = hisi_hba->regs + off;
 746
 747         writel(val, regs);
 748 }
 749
 750 static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no,
 751                                  u32 off, u32 val)
 752 {
 753         void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
 754
 755         writel(val, regs);
 756 }
 757
 758 static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
 759                                       int phy_no, u32 off)
 760 {
 761         void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
 762
 763         return readl(regs);
 764 }
 765
 766 /* This function needs to be protected from pre-emption. */
 767 static int
 768 slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba,
 769                              struct domain_device *device)
 770 {
 771         int sata_dev = dev_is_sata(device);
 772         void *bitmap = hisi_hba->slot_index_tags;
 773         struct hisi_sas_device *sas_dev = device->lldd_dev;
 774         int sata_idx = sas_dev->sata_idx;
 775         int start, end;
 776
 777         if (!sata_dev) {
 778                 /*
 779                  * STP link SoC bug workaround: index starts from 1.
 780                  * additionally, we can only allocate odd IPTT(1~4095)
 781                  * for SAS/SMP device.
 782                  */
 783                 start = 1;
 784                 end = hisi_hba->slot_index_count;
 785         } else {
 786                 if (sata_idx >= HISI_MAX_SATA_SUPPORT_V2_HW)
 787                         return -EINVAL;
 788
 789                 /*
 790                  * For SATA device: allocate even IPTT in this interval
 791                  * [64*(sata_idx+1), 64*(sata_idx+2)], then each SATA device
 792                  * own 32 IPTTs. IPTT 0 shall not be used duing to STP link
 793                  * SoC bug workaround. So we ignore the first 32 even IPTTs.
 794                  */
 795                 start = 64 * (sata_idx + 1);
 796                 end = 64 * (sata_idx + 2);
 797         }
 798
 799         spin_lock(&hisi_hba->lock);
 800         while (1) {
 801                 start = find_next_zero_bit(bitmap,
 802                                         hisi_hba->slot_index_count, start);
 803                 if (start >= end) {
 804                         spin_unlock(&hisi_hba->lock);
 805                         return -SAS_QUEUE_FULL;
 806                 }
 807                 /*
 808                  * SAS IPTT bit0 should be 1, and SATA IPTT bit0 should be 0.
 809                  */
 810                 if (sata_dev ^ (start & 1))
 811                         break;
 812                 start++;
 813         }
 814
 815         set_bit(start, bitmap);
 816         spin_unlock(&hisi_hba->lock);
 817         return start;
 818 }
 819
 820 static bool sata_index_alloc_v2_hw(struct hisi_hba *hisi_hba, int *idx)
 821 {
 822         unsigned int index;
 823         struct device *dev = hisi_hba->dev;
 824         void *bitmap = hisi_hba->sata_dev_bitmap;
 825
 826         index = find_first_zero_bit(bitmap, HISI_MAX_SATA_SUPPORT_V2_HW);
 827         if (index >= HISI_MAX_SATA_SUPPORT_V2_HW) {
 828                 dev_warn(dev, "alloc sata index failed, index=%d\n", index);
 829                 return false;
 830         }
 831
 832         set_bit(index, bitmap);
 833         *idx = index;
 834         return true;
 835 }
 836
 837
 838 static struct
 839 hisi_sas_device *alloc_dev_quirk_v2_hw(struct domain_device *device)
 840 {
 841         struct hisi_hba *hisi_hba = device->port->ha->lldd_ha;
 842         struct hisi_sas_device *sas_dev = NULL;
 843         int i, sata_dev = dev_is_sata(device);
 844         int sata_idx = -1;
 845
 846         spin_lock(&hisi_hba->lock);
 847
 848         if (sata_dev)
 849                 if (!sata_index_alloc_v2_hw(hisi_hba, &sata_idx))
 850                         goto out;
 851
 852         for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
 853                 /*
 854                  * SATA device id bit0 should be 0
 855                  */
 856                 if (sata_dev && (i & 1))
 857                         continue;
 858                 if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
 859                         int queue = i % hisi_hba->queue_count;
 860                         struct hisi_sas_dq *dq = &hisi_hba->dq[queue];
 861
 862                         hisi_hba->devices[i].device_id = i;
 863                         sas_dev = &hisi_hba->devices[i];
 864                         sas_dev->dev_status = HISI_SAS_DEV_INIT;
 865                         sas_dev->dev_type = device->dev_type;
 866                         sas_dev->hisi_hba = hisi_hba;
 867                         sas_dev->sas_device = device;
 868                         sas_dev->sata_idx = sata_idx;
 869                         sas_dev->dq = dq;
 870                         spin_lock_init(&sas_dev->lock);
 871                         INIT_LIST_HEAD(&hisi_hba->devices[i].list);
 872                         break;
 873                 }
 874         }
 875
 876 out:
 877         spin_unlock(&hisi_hba->lock);
 878
 879         return sas_dev;
 880 }
 881
 882 static void config_phy_opt_mode_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
 883 {
 884         u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
 885
 886         cfg &= ~PHY_CFG_DC_OPT_MSK;
 887         cfg |= 1 << PHY_CFG_DC_OPT_OFF;
 888         hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
 889 }
 890
 891 static void config_id_frame_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
 892 {
 893         struct sas_identify_frame identify_frame;
 894         u32 *identify_buffer;
 895
 896         memset(&identify_frame, 0, sizeof(identify_frame));
 897         identify_frame.dev_type = SAS_END_DEVICE;
 898         identify_frame.frame_type = 0;
 899         identify_frame._un1 = 1;
 900         identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
 901         identify_frame.target_bits = SAS_PROTOCOL_NONE;
 902         memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
 903         memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
 904         identify_frame.phy_id = phy_no;
 905         identify_buffer = (u32 *)(&identify_frame);
 906
 907         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
 908                         __swab32(identify_buffer[0]));
 909         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
 910                         __swab32(identify_buffer[1]));
 911         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
 912                         __swab32(identify_buffer[2]));
 913         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
 914                         __swab32(identify_buffer[3]));
 915         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
 916                         __swab32(identify_buffer[4]));
 917         hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
 918                         __swab32(identify_buffer[5]));
 919 }
 920
 921 static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
 922                              struct hisi_sas_device *sas_dev)
 923 {
 924         struct domain_device *device = sas_dev->sas_device;
 925         struct device *dev = hisi_hba->dev;
 926         u64 qw0, device_id = sas_dev->device_id;
 927         struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
 928         struct domain_device *parent_dev = device->parent;
 929         struct asd_sas_port *sas_port = device->port;
 930         struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
 931         u64 sas_addr;
 932
 933         memset(itct, 0, sizeof(*itct));
 934
 935         /* qw0 */
 936         qw0 = 0;
 937         switch (sas_dev->dev_type) {
 938         case SAS_END_DEVICE:
 939         case SAS_EDGE_EXPANDER_DEVICE:
 940         case SAS_FANOUT_EXPANDER_DEVICE:
 941                 qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
 942                 break;
 943         case SAS_SATA_DEV:
 944         case SAS_SATA_PENDING:
 945                 if (parent_dev && dev_is_expander(parent_dev->dev_type))
 946                         qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
 947                 else
 948                         qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
 949                 break;
 950         default:
 951                 dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
 952                          sas_dev->dev_type);
 953         }
 954
 955         qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
 956                 (device->linkrate << ITCT_HDR_MCR_OFF) |
 957                 (1 << ITCT_HDR_VLN_OFF) |
 958                 (ITCT_HDR_SMP_TIMEOUT << ITCT_HDR_SMP_TIMEOUT_OFF) |
 959                 (1 << ITCT_HDR_AWT_CONTINUE_OFF) |
 960                 (port->id << ITCT_HDR_PORT_ID_OFF));
 961         itct->qw0 = cpu_to_le64(qw0);
 962
 963         /* qw1 */
 964         memcpy(&sas_addr, device->sas_addr, SAS_ADDR_SIZE);
 965         itct->sas_addr = cpu_to_le64(__swab64(sas_addr));
 966
 967         /* qw2 */
 968         if (!dev_is_sata(device))
 969                 itct->qw2 = cpu_to_le64((5000ULL << ITCT_HDR_INLT_OFF) |
 970                                         (0x1ULL << ITCT_HDR_BITLT_OFF) |
 971                                         (0x32ULL << ITCT_HDR_MCTLT_OFF) |
 972                                         (0x1ULL << ITCT_HDR_RTOLT_OFF));
 973 }
 974
 975 static int clear_itct_v2_hw(struct hisi_hba *hisi_hba,
 976                             struct hisi_sas_device *sas_dev)
 977 {
 978         DECLARE_COMPLETION_ONSTACK(completion);
 979         u64 dev_id = sas_dev->device_id;
 980         struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
 981         u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
 982         struct device *dev = hisi_hba->dev;
 983         int i;
 984
 985         sas_dev->completion = &completion;
 986
 987         /* clear the itct interrupt state */
 988         if (ENT_INT_SRC3_ITC_INT_MSK & reg_val)
 989                 hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
 990                                  ENT_INT_SRC3_ITC_INT_MSK);
 991
 992         /* need to set register twice to clear ITCT for v2 hw */
 993         for (i = 0; i < 2; i++) {
 994                 reg_val = ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
 995                 hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
 996                 if (!wait_for_completion_timeout(sas_dev->completion,
 997                                                  HISI_SAS_CLEAR_ITCT_TIMEOUT)) {
 998                         dev_warn(dev, "failed to clear ITCT\n");
 999                         return -ETIMEDOUT;
1000                 }
1001
1002                 memset(itct, 0, sizeof(struct hisi_sas_itct));
1003         }
1004         return 0;
1005 }
1006
1007 static void free_device_v2_hw(struct hisi_sas_device *sas_dev)
1008 {
1009         struct hisi_hba *hisi_hba = sas_dev->hisi_hba;
1010
1011         /* SoC bug workaround */
1012         if (dev_is_sata(sas_dev->sas_device))
1013                 clear_bit(sas_dev->sata_idx, hisi_hba->sata_dev_bitmap);
1014 }
1015
1016 static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
1017 {
1018         int i, reset_val;
1019         u32 val;
1020         unsigned long end_time;
1021         struct device *dev = hisi_hba->dev;
1022
1023         /* The mask needs to be set depending on the number of phys */
1024         if (hisi_hba->n_phy == 9)
1025                 reset_val = 0x1fffff;
1026         else
1027                 reset_val = 0x7ffff;
1028
1029         hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
1030
1031         /* Disable all of the PHYs */
1032         for (i = 0; i < hisi_hba->n_phy; i++) {
1033                 u32 phy_cfg = hisi_sas_phy_read32(hisi_hba, i, PHY_CFG);
1034
1035                 phy_cfg &= ~PHY_CTRL_RESET_MSK;
1036                 hisi_sas_phy_write32(hisi_hba, i, PHY_CFG, phy_cfg);
1037         }
1038         udelay(50);
1039
1040         /* Ensure DMA tx & rx idle */
1041         for (i = 0; i < hisi_hba->n_phy; i++) {
1042                 u32 dma_tx_status, dma_rx_status;
1043
1044                 end_time = jiffies + msecs_to_jiffies(1000);
1045
1046                 while (1) {
1047                         dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
1048                                                             DMA_TX_STATUS);
1049                         dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
1050                                                             DMA_RX_STATUS);
1051
1052                         if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
1053                                 !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
1054                                 break;
1055
1056                         msleep(20);
1057                         if (time_after(jiffies, end_time))
1058                                 return -EIO;
1059                 }
1060         }
1061
1062         /* Ensure axi bus idle */
1063         end_time = jiffies + msecs_to_jiffies(1000);
1064         while (1) {
1065                 u32 axi_status =
1066                         hisi_sas_read32(hisi_hba, AXI_CFG);
1067
1068                 if (axi_status == 0)
1069                         break;
1070
1071                 msleep(20);
1072                 if (time_after(jiffies, end_time))
1073                         return -EIO;
1074         }
1075
1076         if (ACPI_HANDLE(dev)) {
1077                 acpi_status s;
1078
1079                 s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
1080                 if (ACPI_FAILURE(s)) {
1081                         dev_err(dev, "Reset failed\n");
1082                         return -EIO;
1083                 }
1084         } else if (hisi_hba->ctrl) {
1085                 /* reset and disable clock*/
1086                 regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
1087                                 reset_val);
1088                 regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
1089                                 reset_val);
1090                 msleep(1);
1091                 regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
1092                 if (reset_val != (val & reset_val)) {
1093                         dev_err(dev, "SAS reset fail.\n");
1094                         return -EIO;
1095                 }
1096
1097                 /* De-reset and enable clock*/
1098                 regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
1099                                 reset_val);
1100                 regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
1101                                 reset_val);
1102                 msleep(1);
1103                 regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg,
1104                                 &val);
1105                 if (val & reset_val) {
1106                         dev_err(dev, "SAS de-reset fail.\n");
1107                         return -EIO;
1108                 }
1109         } else {
1110                 dev_err(dev, "no reset method\n");
1111                 return -EINVAL;
1112         }
1113
1114         return 0;
1115 }
1116
1117 /* This function needs to be called after resetting SAS controller. */
1118 static void phys_reject_stp_links_v2_hw(struct hisi_hba *hisi_hba)
1119 {
1120         u32 cfg;
1121         int phy_no;
1122
1123         hisi_hba->reject_stp_links_msk = (1 << hisi_hba->n_phy) - 1;
1124         for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
1125                 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, CON_CONTROL);
1126                 if (!(cfg & CON_CONTROL_CFG_OPEN_ACC_STP_MSK))
1127                         continue;
1128
1129                 cfg &= ~CON_CONTROL_CFG_OPEN_ACC_STP_MSK;
1130                 hisi_sas_phy_write32(hisi_hba, phy_no, CON_CONTROL, cfg);
1131         }
1132 }
1133
1134 static void phys_try_accept_stp_links_v2_hw(struct hisi_hba *hisi_hba)
1135 {
1136         int phy_no;
1137         u32 dma_tx_dfx1;
1138
1139         for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
1140                 if (!(hisi_hba->reject_stp_links_msk & BIT(phy_no)))
1141                         continue;
1142
1143                 dma_tx_dfx1 = hisi_sas_phy_read32(hisi_hba, phy_no,
1144                                                 DMA_TX_DFX1);
1145                 if (dma_tx_dfx1 & DMA_TX_DFX1_IPTT_MSK) {
1146                         u32 cfg = hisi_sas_phy_read32(hisi_hba,
1147                                 phy_no, CON_CONTROL);
1148
1149                         cfg |= CON_CONTROL_CFG_OPEN_ACC_STP_MSK;
1150                         hisi_sas_phy_write32(hisi_hba, phy_no,
1151                                 CON_CONTROL, cfg);
1152                         clear_bit(phy_no, &hisi_hba->reject_stp_links_msk);
1153                 }
1154         }
1155 }
1156
1157 static const struct signal_attenuation_s x6000 = {9200, 0, 10476};
1158 static const struct sig_atten_lu_s sig_atten_lu[] = {
1159         { &x6000, 0x3016a68 },
1160 };
1161
1162 static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
1163 {
1164         struct device *dev = hisi_hba->dev;
1165         u32 sas_phy_ctrl = 0x30b9908;
1166         u32 signal[3];
1167         int i;
1168
1169         /* Global registers init */
1170
1171         /* Deal with am-max-transmissions quirk */
1172         if (device_property_present(dev, "hip06-sas-v2-quirk-amt")) {
1173                 hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020);
1174                 hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS,
1175                                  0x2020);
1176         } /* Else, use defaults -> do nothing */
1177
1178         hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
1179                          (u32)((1ULL << hisi_hba->queue_count) - 1));
1180         hisi_sas_write32(hisi_hba, AXI_USER1, 0xc0000000);
1181         hisi_sas_write32(hisi_hba, AXI_USER2, 0x10000);
1182         hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x0);
1183         hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF);
1184         hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1);
1185         hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4);
1186         hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x32);
1187         hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1);
1188         hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
1189         hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1);
1190         hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
1191         hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
1192         hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x60);
1193         hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x3);
1194         hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
1195         hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
1196         hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0x0);
1197         hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
1198         hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
1199         hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
1200         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe);
1201         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe);
1202         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffe20fe);
1203         hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfff00c30);
1204         for (i = 0; i < hisi_hba->queue_count; i++)
1205                 hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0);
1206
1207         hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1);
1208         hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
1209
1210         /* Get sas_phy_ctrl value to deal with TX FFE issue. */
1211         if (!device_property_read_u32_array(dev, "hisilicon,signal-attenuation",
1212                                             signal, ARRAY_SIZE(signal))) {
1213                 for (i = 0; i < ARRAY_SIZE(sig_atten_lu); i++) {
1214                         const struct sig_atten_lu_s *lookup = &sig_atten_lu[i];
1215                         const struct signal_attenuation_s *att = lookup->att;
1216
1217                         if ((signal[0] == att->de_emphasis) &&
1218                             (signal[1] == att->preshoot) &&
1219                             (signal[2] == att->boost)) {
1220                                 sas_phy_ctrl = lookup->sas_phy_ctrl;
1221                                 break;
1222                         }
1223                 }
1224
1225                 if (i == ARRAY_SIZE(sig_atten_lu))
1226                         dev_warn(dev, "unknown signal attenuation values, using default PHY ctrl config\n");
1227         }
1228
1229         for (i = 0; i < hisi_hba->n_phy; i++) {
1230                 struct hisi_sas_phy *phy = &hisi_hba->phy[i];
1231                 struct asd_sas_phy *sas_phy = &phy->sas_phy;
1232                 u32 prog_phy_link_rate = 0x800;
1233
1234                 if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate <
1235                                 SAS_LINK_RATE_1_5_GBPS)) {
1236                         prog_phy_link_rate = 0x855;
1237                 } else {
1238                         enum sas_linkrate max = sas_phy->phy->maximum_linkrate;
1239
1240                         prog_phy_link_rate =
1241                                 hisi_sas_get_prog_phy_linkrate_mask(max) |
1242                                 0x800;
1243                 }
1244                 hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE,
1245                         prog_phy_link_rate);
1246                 hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, sas_phy_ctrl);
1247                 hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
1248                 hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0);
1249                 hisi_sas_phy_write32(hisi_hba, i, TXID_AUTO, 0x2);
1250                 hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x8);
1251                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
1252                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
1253                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xfff87fff);
1254                 hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
1255                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xff857fff);
1256                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbfe);
1257                 hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x13f801fc);
1258                 hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
1259                 hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
1260                 hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
1261                 hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0);
1262                 hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
1263                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0);
1264                 hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
1265                 if (hisi_hba->refclk_frequency_mhz == 66)
1266                         hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
1267                 /* else, do nothing -> leave it how you found it */
1268         }
1269
1270         for (i = 0; i < hisi_hba->queue_count; i++) {
1271                 /* Delivery queue */
1272                 hisi_sas_write32(hisi_hba,
1273                                  DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
1274                                  upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
1275
1276                 hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
1277                                  lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
1278
1279                 hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14),
1280                                  HISI_SAS_QUEUE_SLOTS);
1281
1282                 /* Completion queue */
1283                 hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
1284                                  upper_32_bits(hisi_hba->complete_hdr_dma[i]));
1285
1286                 hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
1287                                  lower_32_bits(hisi_hba->complete_hdr_dma[i]));
1288
1289                 hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
1290                                  HISI_SAS_QUEUE_SLOTS);
1291         }
1292
1293         /* itct */
1294         hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
1295                          lower_32_bits(hisi_hba->itct_dma));
1296
1297         hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
1298                          upper_32_bits(hisi_hba->itct_dma));
1299
1300         /* iost */
1301         hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
1302                          lower_32_bits(hisi_hba->iost_dma));
1303
1304         hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
1305                          upper_32_bits(hisi_hba->iost_dma));
1306
1307         /* breakpoint */
1308         hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO,
1309                          lower_32_bits(hisi_hba->breakpoint_dma));
1310
1311         hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI,
1312                          upper_32_bits(hisi_hba->breakpoint_dma));
1313
1314         /* SATA broken msg */
1315         hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO,
1316                          lower_32_bits(hisi_hba->sata_breakpoint_dma));
1317
1318         hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI,
1319                          upper_32_bits(hisi_hba->sata_breakpoint_dma));
1320
1321         /* SATA initial fis */
1322         hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO,
1323                          lower_32_bits(hisi_hba->initial_fis_dma));
1324
1325         hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI,
1326                          upper_32_bits(hisi_hba->initial_fis_dma));
1327 }
1328
1329 static void link_timeout_enable_link(struct timer_list *t)
1330 {
1331         struct hisi_hba *hisi_hba = from_timer(hisi_hba, t, timer);
1332         int i, reg_val;
1333
1334         for (i = 0; i < hisi_hba->n_phy; i++) {
1335                 if (hisi_hba->reject_stp_links_msk & BIT(i))
1336                         continue;
1337
1338                 reg_val = hisi_sas_phy_read32(hisi_hba, i, CON_CONTROL);
1339                 if (!(reg_val & BIT(0))) {
1340                         hisi_sas_phy_write32(hisi_hba, i,
1341                                         CON_CONTROL, 0x7);
1342                         break;
1343                 }
1344         }
1345
1346         hisi_hba->timer.function = link_timeout_disable_link;
1347         mod_timer(&hisi_hba->timer, jiffies + msecs_to_jiffies(900));
1348 }
1349
1350 static void link_timeout_disable_link(struct timer_list *t)
1351 {
1352         struct hisi_hba *hisi_hba = from_timer(hisi_hba, t, timer);
1353         int i, reg_val;
1354
1355         reg_val = hisi_sas_read32(hisi_hba, PHY_STATE);
1356         for (i = 0; i < hisi_hba->n_phy && reg_val; i++) {
1357                 if (hisi_hba->reject_stp_links_msk & BIT(i))
1358                         continue;
1359
1360                 if (reg_val & BIT(i)) {
1361                         hisi_sas_phy_write32(hisi_hba, i,
1362                                         CON_CONTROL, 0x6);
1363                         break;
1364                 }
1365         }
1366
1367         hisi_hba->timer.function = link_timeout_enable_link;
1368         mod_timer(&hisi_hba->timer, jiffies + msecs_to_jiffies(100));
1369 }
1370
1371 static void set_link_timer_quirk(struct hisi_hba *hisi_hba)
1372 {
1373         hisi_hba->timer.function = link_timeout_disable_link;
1374         hisi_hba->timer.expires = jiffies + msecs_to_jiffies(1000);
1375         add_timer(&hisi_hba->timer);
1376 }
1377
1378 static int hw_init_v2_hw(struct hisi_hba *hisi_hba)
1379 {
1380         struct device *dev = hisi_hba->dev;
1381         int rc;
1382
1383         rc = reset_hw_v2_hw(hisi_hba);
1384         if (rc) {
1385                 dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
1386                 return rc;
1387         }
1388
1389         msleep(100);
1390         init_reg_v2_hw(hisi_hba);
1391
1392         return 0;
1393 }
1394
1395 static void enable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1396 {
1397         u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
1398
1399         cfg |= PHY_CFG_ENA_MSK;
1400         hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
1401 }
1402
1403 static bool is_sata_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1404 {
1405         u32 context;
1406
1407         context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
1408         if (context & (1 << phy_no))
1409                 return true;
1410
1411         return false;
1412 }
1413
1414 static bool tx_fifo_is_empty_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1415 {
1416         u32 dfx_val;
1417
1418         dfx_val = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX1);
1419
1420         if (dfx_val & BIT(16))
1421                 return false;
1422
1423         return true;
1424 }
1425
1426 static bool axi_bus_is_idle_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1427 {
1428         int i, max_loop = 1000;
1429         struct device *dev = hisi_hba->dev;
1430         u32 status, axi_status, dfx_val, dfx_tx_val;
1431
1432         for (i = 0; i < max_loop; i++) {
1433                 status = hisi_sas_read32_relaxed(hisi_hba,
1434                         AXI_MASTER_CFG_BASE + AM_CURR_TRANS_RETURN);
1435
1436                 axi_status = hisi_sas_read32(hisi_hba, AXI_CFG);
1437                 dfx_val = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX1);
1438                 dfx_tx_val = hisi_sas_phy_read32(hisi_hba,
1439                         phy_no, DMA_TX_FIFO_DFX0);
1440
1441                 if ((status == 0x3) && (axi_status == 0x0) &&
1442                     (dfx_val & BIT(20)) && (dfx_tx_val & BIT(10)))
1443                         return true;
1444                 udelay(10);
1445         }
1446         dev_err(dev, "bus is not idle phy%d, axi150:0x%x axi100:0x%x port204:0x%x port240:0x%x\n",
1447                         phy_no, status, axi_status,
1448                         dfx_val, dfx_tx_val);
1449         return false;
1450 }
1451
1452 static bool wait_io_done_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1453 {
1454         int i, max_loop = 1000;
1455         struct device *dev = hisi_hba->dev;
1456         u32 status, tx_dfx0;
1457
1458         for (i = 0; i < max_loop; i++) {
1459                 status = hisi_sas_phy_read32(hisi_hba, phy_no, LINK_DFX2);
1460                 status = (status & 0x3fc0) >> 6;
1461
1462                 if (status != 0x1)
1463                         return true;
1464
1465                 tx_dfx0 = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX0);
1466                 if ((tx_dfx0 & 0x1ff) == 0x2)
1467                         return true;
1468                 udelay(10);
1469         }
1470         dev_err(dev, "IO not done phy%d, port264:0x%x port200:0x%x\n",
1471                         phy_no, status, tx_dfx0);
1472         return false;
1473 }
1474
1475 static bool allowed_disable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1476 {
1477         if (tx_fifo_is_empty_v2_hw(hisi_hba, phy_no))
1478                 return true;
1479
1480         if (!axi_bus_is_idle_v2_hw(hisi_hba, phy_no))
1481                 return false;
1482
1483         if (!wait_io_done_v2_hw(hisi_hba, phy_no))
1484                 return false;
1485
1486         return true;
1487 }
1488
1489
1490 static void disable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1491 {
1492         u32 cfg, axi_val, dfx0_val, txid_auto;
1493         struct device *dev = hisi_hba->dev;
1494
1495         /* Close axi bus. */
1496         axi_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
1497                                 AM_CTRL_GLOBAL);
1498         axi_val |= 0x1;
1499         hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
1500                 AM_CTRL_GLOBAL, axi_val);
1501
1502         if (is_sata_phy_v2_hw(hisi_hba, phy_no)) {
1503                 if (allowed_disable_phy_v2_hw(hisi_hba, phy_no))
1504                         goto do_disable;
1505
1506                 /* Reset host controller. */
1507                 queue_work(hisi_hba->wq, &hisi_hba->rst_work);
1508                 return;
1509         }
1510
1511         dfx0_val = hisi_sas_phy_read32(hisi_hba, phy_no, PORT_DFX0);
1512         dfx0_val = (dfx0_val & 0x1fc0) >> 6;
1513         if (dfx0_val != 0x4)
1514                 goto do_disable;
1515
1516         if (!tx_fifo_is_empty_v2_hw(hisi_hba, phy_no)) {
1517                 dev_warn(dev, "phy%d, wait tx fifo need send break\n",
1518                         phy_no);
1519                 txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no,
1520                                         TXID_AUTO);
1521                 txid_auto |= TXID_AUTO_CTB_MSK;
1522                 hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
1523                                         txid_auto);
1524         }
1525
1526 do_disable:
1527         cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
1528         cfg &= ~PHY_CFG_ENA_MSK;
1529         hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
1530
1531         /* Open axi bus. */
1532         axi_val &= ~0x1;
1533         hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
1534                 AM_CTRL_GLOBAL, axi_val);
1535 }
1536
1537 static void start_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1538 {
1539         config_id_frame_v2_hw(hisi_hba, phy_no);
1540         config_phy_opt_mode_v2_hw(hisi_hba, phy_no);
1541         enable_phy_v2_hw(hisi_hba, phy_no);
1542 }
1543
1544 static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1545 {
1546         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
1547         u32 txid_auto;
1548
1549         hisi_sas_phy_enable(hisi_hba, phy_no, 0);
1550         if (phy->identify.device_type == SAS_END_DEVICE) {
1551                 txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
1552                 hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
1553                                         txid_auto | TX_HARDRST_MSK);
1554         }
1555         msleep(100);
1556         hisi_sas_phy_enable(hisi_hba, phy_no, 1);
1557 }
1558
1559 static void phy_get_events_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1560 {
1561         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
1562         struct asd_sas_phy *sas_phy = &phy->sas_phy;
1563         struct sas_phy *sphy = sas_phy->phy;
1564         u32 err4_reg_val, err6_reg_val;
1565
1566         /* loss dword syn, phy reset problem */
1567         err4_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT4_REG);
1568
1569         /* disparity err, invalid dword */
1570         err6_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT6_REG);
1571
1572         sphy->loss_of_dword_sync_count += (err4_reg_val >> 16) & 0xFFFF;
1573         sphy->phy_reset_problem_count += err4_reg_val & 0xFFFF;
1574         sphy->invalid_dword_count += (err6_reg_val & 0xFF0000) >> 16;
1575         sphy->running_disparity_error_count += err6_reg_val & 0xFF;
1576 }
1577
1578 static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
1579 {
1580         int i;
1581
1582         for (i = 0; i < hisi_hba->n_phy; i++) {
1583                 struct hisi_sas_phy *phy = &hisi_hba->phy[i];
1584                 struct asd_sas_phy *sas_phy = &phy->sas_phy;
1585
1586                 if (!sas_phy->phy->enabled)
1587                         continue;
1588
1589                 hisi_sas_phy_enable(hisi_hba, i, 1);
1590         }
1591 }
1592
1593 static void sl_notify_ssp_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
1594 {
1595         u32 sl_control;
1596
1597         sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
1598         sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
1599         hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
1600         msleep(1);
1601         sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
1602         sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
1603         hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
1604 }
1605
1606 static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
1607 {
1608         return SAS_LINK_RATE_12_0_GBPS;
1609 }
1610
1611 static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
1612                 struct sas_phy_linkrates *r)
1613 {
1614         enum sas_linkrate max = r->maximum_linkrate;
1615         u32 prog_phy_link_rate = 0x800;
1616
1617         prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
1618         hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
1619                              prog_phy_link_rate);
1620 }
1621
1622 static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
1623 {
1624         int i, bitmap = 0;
1625         u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
1626         u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
1627
1628         for (i = 0; i < (hisi_hba->n_phy < 9 ? hisi_hba->n_phy : 8); i++)
1629                 if (phy_state & 1 << i)
1630                         if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
1631                                 bitmap |= 1 << i;
1632
1633         if (hisi_hba->n_phy == 9) {
1634                 u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
1635
1636                 if (phy_state & 1 << 8)
1637                         if (((port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
1638                              PORT_STATE_PHY8_PORT_NUM_OFF) == port_id)
1639                                 bitmap |= 1 << 9;
1640         }
1641
1642         return bitmap;
1643 }
1644
1645 /* DQ lock must be taken here */
1646 static void start_delivery_v2_hw(struct hisi_sas_dq *dq)
1647 {
1648         struct hisi_hba *hisi_hba = dq->hisi_hba;
1649         struct hisi_sas_slot *s, *s1, *s2 = NULL;
1650         int dlvry_queue = dq->id;
1651         int wp;
1652
1653         list_for_each_entry_safe(s, s1, &dq->list, delivery) {
1654                 if (!s->ready)
1655                         break;
1656                 s2 = s;
1657                 list_del(&s->delivery);
1658         }
1659
1660         if (!s2)
1661                 return;
1662
1663         /*
1664          * Ensure that memories for slots built on other CPUs is observed.
1665          */
1666         smp_rmb();
1667         wp = (s2->dlvry_queue_slot + 1) % HISI_SAS_QUEUE_SLOTS;
1668
1669         hisi_sas_write32(hisi_hba, DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14), wp);
1670 }
1671
1672 static void prep_prd_sge_v2_hw(struct hisi_hba *hisi_hba,
1673                               struct hisi_sas_slot *slot,
1674                               struct hisi_sas_cmd_hdr *hdr,
1675                               struct scatterlist *scatter,
1676                               int n_elem)
1677 {
1678         struct hisi_sas_sge_page *sge_page = hisi_sas_sge_addr_mem(slot);
1679         struct scatterlist *sg;
1680         int i;
1681
1682         for_each_sg(scatter, sg, n_elem, i) {
1683                 struct hisi_sas_sge *entry = &sge_page->sge[i];
1684
1685                 entry->addr = cpu_to_le64(sg_dma_address(sg));
1686                 entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
1687                 entry->data_len = cpu_to_le32(sg_dma_len(sg));
1688                 entry->data_off = 0;
1689         }
1690
1691         hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
1692
1693         hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
1694 }
1695
1696 static void prep_smp_v2_hw(struct hisi_hba *hisi_hba,
1697                           struct hisi_sas_slot *slot)
1698 {
1699         struct sas_task *task = slot->task;
1700         struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
1701         struct domain_device *device = task->dev;
1702         struct hisi_sas_port *port = slot->port;
1703         struct scatterlist *sg_req;
1704         struct hisi_sas_device *sas_dev = device->lldd_dev;
1705         dma_addr_t req_dma_addr;
1706         unsigned int req_len;
1707
1708         /* req */
1709         sg_req = &task->smp_task.smp_req;
1710         req_dma_addr = sg_dma_address(sg_req);
1711         req_len = sg_dma_len(&task->smp_task.smp_req);
1712
1713         /* create header */
1714         /* dw0 */
1715         hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
1716                                (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
1717                                (2 << CMD_HDR_CMD_OFF)); /* smp */
1718
1719         /* map itct entry */
1720         hdr->dw1 = cpu_to_le32((sas_dev->device_id << CMD_HDR_DEV_ID_OFF) |
1721                                (1 << CMD_HDR_FRAME_TYPE_OFF) |
1722                                (DIR_NO_DATA << CMD_HDR_DIR_OFF));
1723
1724         /* dw2 */
1725         hdr->dw2 = cpu_to_le32((((req_len - 4) / 4) << CMD_HDR_CFL_OFF) |
1726                                (HISI_SAS_MAX_SMP_RESP_SZ / 4 <<
1727                                CMD_HDR_MRFL_OFF));
1728
1729         hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
1730
1731         hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
1732         hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
1733 }
1734
1735 static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
1736                           struct hisi_sas_slot *slot)
1737 {
1738         struct sas_task *task = slot->task;
1739         struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
1740         struct domain_device *device = task->dev;
1741         struct hisi_sas_device *sas_dev = device->lldd_dev;
1742         struct hisi_sas_port *port = slot->port;
1743         struct sas_ssp_task *ssp_task = &task->ssp_task;
1744         struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
1745         struct sas_tmf_task *tmf = slot->tmf;
1746         int has_data = 0, priority = !!tmf;
1747         u8 *buf_cmd;
1748         u32 dw1 = 0, dw2 = 0;
1749
1750         hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
1751                                (2 << CMD_HDR_TLR_CTRL_OFF) |
1752                                (port->id << CMD_HDR_PORT_OFF) |
1753                                (priority << CMD_HDR_PRIORITY_OFF) |
1754                                (1 << CMD_HDR_CMD_OFF)); /* ssp */
1755
1756         dw1 = 1 << CMD_HDR_VDTL_OFF;
1757         if (tmf) {
1758                 dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
1759                 dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
1760         } else {
1761                 dw1 |= 1 << CMD_HDR_FRAME_TYPE_OFF;
1762                 switch (scsi_cmnd->sc_data_direction) {
1763                 case DMA_TO_DEVICE:
1764                         has_data = 1;
1765                         dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
1766                         break;
1767                 case DMA_FROM_DEVICE:
1768                         has_data = 1;
1769                         dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
1770                         break;
1771                 default:
1772                         dw1 &= ~CMD_HDR_DIR_MSK;
1773                 }
1774         }
1775
1776         /* map itct entry */
1777         dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
1778         hdr->dw1 = cpu_to_le32(dw1);
1779
1780         dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
1781               + 3) / 4) << CMD_HDR_CFL_OFF) |
1782               ((HISI_SAS_MAX_SSP_RESP_SZ / 4) << CMD_HDR_MRFL_OFF) |
1783               (2 << CMD_HDR_SG_MOD_OFF);
1784         hdr->dw2 = cpu_to_le32(dw2);
1785
1786         hdr->transfer_tags = cpu_to_le32(slot->idx);
1787
1788         if (has_data)
1789                 prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter,
1790                                         slot->n_elem);
1791
1792         hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
1793         hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
1794         hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
1795
1796         buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot) +
1797                 sizeof(struct ssp_frame_hdr);
1798
1799         memcpy(buf_cmd, &task->ssp_task.LUN, 8);
1800         if (!tmf) {
1801                 buf_cmd[9] = task->ssp_task.task_attr;
1802                 memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
1803                                 task->ssp_task.cmd->cmd_len);
1804         } else {
1805                 buf_cmd[10] = tmf->tmf;
1806                 switch (tmf->tmf) {
1807                 case TMF_ABORT_TASK:
1808                 case TMF_QUERY_TASK:
1809                         buf_cmd[12] =
1810                                 (tmf->tag_of_task_to_be_managed >> 8) & 0xff;
1811                         buf_cmd[13] =
1812                                 tmf->tag_of_task_to_be_managed & 0xff;
1813                         break;
1814                 default:
1815                         break;
1816                 }
1817         }
1818 }
1819
1820 #define TRANS_TX_ERR    0
1821 #define TRANS_RX_ERR    1
1822 #define DMA_TX_ERR              2
1823 #define SIPC_RX_ERR             3
1824 #define DMA_RX_ERR              4
1825
1826 #define DMA_TX_ERR_OFF  0
1827 #define DMA_TX_ERR_MSK  (0xffff << DMA_TX_ERR_OFF)
1828 #define SIPC_RX_ERR_OFF 16
1829 #define SIPC_RX_ERR_MSK (0xffff << SIPC_RX_ERR_OFF)
1830
1831 static int parse_trans_tx_err_code_v2_hw(u32 err_msk)
1832 {
1833         static const u8 trans_tx_err_code_prio[] = {
1834                 TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS,
1835                 TRANS_TX_ERR_PHY_NOT_ENABLE,
1836                 TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION,
1837                 TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION,
1838                 TRANS_TX_OPEN_CNX_ERR_BY_OTHER,
1839                 RESERVED0,
1840                 TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT,
1841                 TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY,
1842                 TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED,
1843                 TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED,
1844                 TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION,
1845                 TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD,
1846                 TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER,
1847                 TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED,
1848                 TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT,
1849                 TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION,
1850                 TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED,
1851                 TRANS_TX_ERR_WITH_CLOSE_PHYDISALE,
1852                 TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT,
1853                 TRANS_TX_ERR_WITH_CLOSE_COMINIT,
1854                 TRANS_TX_ERR_WITH_BREAK_TIMEOUT,
1855                 TRANS_TX_ERR_WITH_BREAK_REQUEST,
1856                 TRANS_TX_ERR_WITH_BREAK_RECEVIED,
1857                 TRANS_TX_ERR_WITH_CLOSE_TIMEOUT,
1858                 TRANS_TX_ERR_WITH_CLOSE_NORMAL,
1859                 TRANS_TX_ERR_WITH_NAK_RECEVIED,
1860                 TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT,
1861                 TRANS_TX_ERR_WITH_CREDIT_TIMEOUT,
1862                 TRANS_TX_ERR_WITH_IPTT_CONFLICT,
1863                 TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS,
1864                 TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT,
1865         };
1866         int index, i;
1867
1868         for (i = 0; i < ARRAY_SIZE(trans_tx_err_code_prio); i++) {
1869                 index = trans_tx_err_code_prio[i] - TRANS_TX_FAIL_BASE;
1870                 if (err_msk & (1 << index))
1871                         return trans_tx_err_code_prio[i];
1872         }
1873         return -1;
1874 }
1875
1876 static int parse_trans_rx_err_code_v2_hw(u32 err_msk)
1877 {
1878         static const u8 trans_rx_err_code_prio[] = {
1879                 TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR,
1880                 TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR,
1881                 TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM,
1882                 TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR,
1883                 TRANS_RX_ERR_WITH_RXFIS_CRC_ERR,
1884                 TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN,
1885                 TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP,
1886                 TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN,
1887                 TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE,
1888                 TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT,
1889                 TRANS_RX_ERR_WITH_CLOSE_COMINIT,
1890                 TRANS_RX_ERR_WITH_BREAK_TIMEOUT,
1891                 TRANS_RX_ERR_WITH_BREAK_REQUEST,
1892                 TRANS_RX_ERR_WITH_BREAK_RECEVIED,
1893                 RESERVED1,
1894                 TRANS_RX_ERR_WITH_CLOSE_NORMAL,
1895                 TRANS_RX_ERR_WITH_DATA_LEN0,
1896                 TRANS_RX_ERR_WITH_BAD_HASH,
1897                 TRANS_RX_XRDY_WLEN_ZERO_ERR,
1898                 TRANS_RX_SSP_FRM_LEN_ERR,
1899                 RESERVED2,
1900                 RESERVED3,
1901                 RESERVED4,
1902                 RESERVED5,
1903                 TRANS_RX_ERR_WITH_BAD_FRM_TYPE,
1904                 TRANS_RX_SMP_FRM_LEN_ERR,
1905                 TRANS_RX_SMP_RESP_TIMEOUT_ERR,
1906                 RESERVED6,
1907                 RESERVED7,
1908                 RESERVED8,
1909                 RESERVED9,
1910                 TRANS_RX_R_ERR,
1911         };
1912         int index, i;
1913
1914         for (i = 0; i < ARRAY_SIZE(trans_rx_err_code_prio); i++) {
1915                 index = trans_rx_err_code_prio[i] - TRANS_RX_FAIL_BASE;
1916                 if (err_msk & (1 << index))
1917                         return trans_rx_err_code_prio[i];
1918         }
1919         return -1;
1920 }
1921
1922 static int parse_dma_tx_err_code_v2_hw(u32 err_msk)
1923 {
1924         static const u8 dma_tx_err_code_prio[] = {
1925                 DMA_TX_UNEXP_XFER_ERR,
1926                 DMA_TX_UNEXP_RETRANS_ERR,
1927                 DMA_TX_XFER_LEN_OVERFLOW,
1928                 DMA_TX_XFER_OFFSET_ERR,
1929                 DMA_TX_RAM_ECC_ERR,
1930                 DMA_TX_DIF_LEN_ALIGN_ERR,
1931                 DMA_TX_DIF_CRC_ERR,
1932                 DMA_TX_DIF_APP_ERR,
1933                 DMA_TX_DIF_RPP_ERR,
1934                 DMA_TX_DATA_SGL_OVERFLOW,
1935                 DMA_TX_DIF_SGL_OVERFLOW,
1936         };
1937         int index, i;
1938
1939         for (i = 0; i < ARRAY_SIZE(dma_tx_err_code_prio); i++) {
1940                 index = dma_tx_err_code_prio[i] - DMA_TX_ERR_BASE;
1941                 err_msk = err_msk & DMA_TX_ERR_MSK;
1942                 if (err_msk & (1 << index))
1943                         return dma_tx_err_code_prio[i];
1944         }
1945         return -1;
1946 }
1947
1948 static int parse_sipc_rx_err_code_v2_hw(u32 err_msk)
1949 {
1950         static const u8 sipc_rx_err_code_prio[] = {
1951                 SIPC_RX_FIS_STATUS_ERR_BIT_VLD,
1952                 SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR,
1953                 SIPC_RX_FIS_STATUS_BSY_BIT_ERR,
1954                 SIPC_RX_WRSETUP_LEN_ODD_ERR,
1955                 SIPC_RX_WRSETUP_LEN_ZERO_ERR,
1956                 SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR,
1957                 SIPC_RX_NCQ_WRSETUP_OFFSET_ERR,
1958                 SIPC_RX_NCQ_WRSETUP_AUTO_ACTIVE_ERR,
1959                 SIPC_RX_SATA_UNEXP_FIS_ERR,
1960                 SIPC_RX_WRSETUP_ESTATUS_ERR,
1961                 SIPC_RX_DATA_UNDERFLOW_ERR,
1962         };
1963         int index, i;
1964
1965         for (i = 0; i < ARRAY_SIZE(sipc_rx_err_code_prio); i++) {
1966                 index = sipc_rx_err_code_prio[i] - SIPC_RX_ERR_BASE;
1967                 err_msk = err_msk & SIPC_RX_ERR_MSK;
1968                 if (err_msk & (1 << (index + 0x10)))
1969                         return sipc_rx_err_code_prio[i];
1970         }
1971         return -1;
1972 }
1973
1974 static int parse_dma_rx_err_code_v2_hw(u32 err_msk)
1975 {
1976         static const u8 dma_rx_err_code_prio[] = {
1977                 DMA_RX_UNKNOWN_FRM_ERR,
1978                 DMA_RX_DATA_LEN_OVERFLOW,
1979                 DMA_RX_DATA_LEN_UNDERFLOW,
1980                 DMA_RX_DATA_OFFSET_ERR,
1981                 RESERVED10,
1982                 DMA_RX_SATA_FRAME_TYPE_ERR,
1983                 DMA_RX_RESP_BUF_OVERFLOW,
1984                 DMA_RX_UNEXP_RETRANS_RESP_ERR,
1985                 DMA_RX_UNEXP_NORM_RESP_ERR,
1986                 DMA_RX_UNEXP_RDFRAME_ERR,
1987                 DMA_RX_PIO_DATA_LEN_ERR,
1988                 DMA_RX_RDSETUP_STATUS_ERR,
1989                 DMA_RX_RDSETUP_STATUS_DRQ_ERR,
1990                 DMA_RX_RDSETUP_STATUS_BSY_ERR,
1991                 DMA_RX_RDSETUP_LEN_ODD_ERR,
1992                 DMA_RX_RDSETUP_LEN_ZERO_ERR,
1993                 DMA_RX_RDSETUP_LEN_OVER_ERR,
1994                 DMA_RX_RDSETUP_OFFSET_ERR,
1995                 DMA_RX_RDSETUP_ACTIVE_ERR,
1996                 DMA_RX_RDSETUP_ESTATUS_ERR,
1997                 DMA_RX_RAM_ECC_ERR,
1998                 DMA_RX_DIF_CRC_ERR,
1999                 DMA_RX_DIF_APP_ERR,
2000                 DMA_RX_DIF_RPP_ERR,
2001                 DMA_RX_DATA_SGL_OVERFLOW,
2002                 DMA_RX_DIF_SGL_OVERFLOW,
2003         };
2004         int index, i;
2005
2006         for (i = 0; i < ARRAY_SIZE(dma_rx_err_code_prio); i++) {
2007                 index = dma_rx_err_code_prio[i] - DMA_RX_ERR_BASE;
2008                 if (err_msk & (1 << index))
2009                         return dma_rx_err_code_prio[i];
2010         }
2011         return -1;
2012 }
2013
2014 /* by default, task resp is complete */
2015 static void slot_err_v2_hw(struct hisi_hba *hisi_hba,
2016                            struct sas_task *task,
2017                            struct hisi_sas_slot *slot,
2018                            int err_phase)
2019 {
2020         struct task_status_struct *ts = &task->task_status;
2021         struct hisi_sas_err_record_v2 *err_record =
2022                         hisi_sas_status_buf_addr_mem(slot);
2023         u32 trans_tx_fail_type = le32_to_cpu(err_record->trans_tx_fail_type);
2024         u32 trans_rx_fail_type = le32_to_cpu(err_record->trans_rx_fail_type);
2025         u16 dma_tx_err_type = le16_to_cpu(err_record->dma_tx_err_type);
2026         u16 sipc_rx_err_type = le16_to_cpu(err_record->sipc_rx_err_type);
2027         u32 dma_rx_err_type = le32_to_cpu(err_record->dma_rx_err_type);
2028         int error = -1;
2029
2030         if (err_phase == 1) {
2031                 /* error in TX phase, the priority of error is: DW2 > DW0 */
2032                 error = parse_dma_tx_err_code_v2_hw(dma_tx_err_type);
2033                 if (error == -1)
2034                         error = parse_trans_tx_err_code_v2_hw(
2035                                         trans_tx_fail_type);
2036         } else if (err_phase == 2) {
2037                 /* error in RX phase, the priority is: DW1 > DW3 > DW2 */
2038                 error = parse_trans_rx_err_code_v2_hw(trans_rx_fail_type);
2039                 if (error == -1) {
2040                         error = parse_dma_rx_err_code_v2_hw(
2041                                         dma_rx_err_type);
2042                         if (error == -1)
2043                                 error = parse_sipc_rx_err_code_v2_hw(
2044                                                 sipc_rx_err_type);
2045                 }
2046         }
2047
2048         switch (task->task_proto) {
2049         case SAS_PROTOCOL_SSP:
2050         {
2051                 switch (error) {
2052                 case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION:
2053                 {
2054                         ts->stat = SAS_OPEN_REJECT;
2055                         ts->open_rej_reason = SAS_OREJ_NO_DEST;
2056                         break;
2057                 }
2058                 case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED:
2059                 {
2060                         ts->stat = SAS_OPEN_REJECT;
2061                         ts->open_rej_reason = SAS_OREJ_EPROTO;
2062                         break;
2063                 }
2064                 case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED:
2065                 {
2066                         ts->stat = SAS_OPEN_REJECT;
2067                         ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2068                         break;
2069                 }
2070                 case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION:
2071                 {
2072                         ts->stat = SAS_OPEN_REJECT;
2073                         ts->open_rej_reason = SAS_OREJ_BAD_DEST;
2074                         break;
2075                 }
2076                 case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION:
2077                 {
2078                         ts->stat = SAS_OPEN_REJECT;
2079                         ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
2080                         break;
2081                 }
2082                 case DMA_RX_UNEXP_NORM_RESP_ERR:
2083                 case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION:
2084                 case DMA_RX_RESP_BUF_OVERFLOW:
2085                 {
2086                         ts->stat = SAS_OPEN_REJECT;
2087                         ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2088                         break;
2089                 }
2090                 case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER:
2091                 {
2092                         /* not sure */
2093                         ts->stat = SAS_DEV_NO_RESPONSE;
2094                         break;
2095                 }
2096                 case DMA_RX_DATA_LEN_OVERFLOW:
2097                 {
2098                         ts->stat = SAS_DATA_OVERRUN;
2099                         ts->residual = 0;
2100                         break;
2101                 }
2102                 case DMA_RX_DATA_LEN_UNDERFLOW:
2103                 {
2104                         ts->residual = trans_tx_fail_type;
2105                         ts->stat = SAS_DATA_UNDERRUN;
2106                         break;
2107                 }
2108                 case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS:
2109                 case TRANS_TX_ERR_PHY_NOT_ENABLE:
2110                 case TRANS_TX_OPEN_CNX_ERR_BY_OTHER:
2111                 case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT:
2112                 case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD:
2113                 case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED:
2114                 case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT:
2115                 case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED:
2116                 case TRANS_TX_ERR_WITH_BREAK_TIMEOUT:
2117                 case TRANS_TX_ERR_WITH_BREAK_REQUEST:
2118                 case TRANS_TX_ERR_WITH_BREAK_RECEVIED:
2119                 case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT:
2120                 case TRANS_TX_ERR_WITH_CLOSE_NORMAL:
2121                 case TRANS_TX_ERR_WITH_CLOSE_PHYDISALE:
2122                 case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT:
2123                 case TRANS_TX_ERR_WITH_CLOSE_COMINIT:
2124                 case TRANS_TX_ERR_WITH_NAK_RECEVIED:
2125                 case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT:
2126                 case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT:
2127                 case TRANS_TX_ERR_WITH_IPTT_CONFLICT:
2128                 case TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR:
2129                 case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR:
2130                 case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM:
2131                 case TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN:
2132                 case TRANS_RX_ERR_WITH_BREAK_TIMEOUT:
2133                 case TRANS_RX_ERR_WITH_BREAK_REQUEST:
2134                 case TRANS_RX_ERR_WITH_BREAK_RECEVIED:
2135                 case TRANS_RX_ERR_WITH_CLOSE_NORMAL:
2136                 case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT:
2137                 case TRANS_RX_ERR_WITH_CLOSE_COMINIT:
2138                 case TRANS_TX_ERR_FRAME_TXED:
2139                 case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE:
2140                 case TRANS_RX_ERR_WITH_DATA_LEN0:
2141                 case TRANS_RX_ERR_WITH_BAD_HASH:
2142                 case TRANS_RX_XRDY_WLEN_ZERO_ERR:
2143                 case TRANS_RX_SSP_FRM_LEN_ERR:
2144                 case TRANS_RX_ERR_WITH_BAD_FRM_TYPE:
2145                 case DMA_TX_DATA_SGL_OVERFLOW:
2146                 case DMA_TX_UNEXP_XFER_ERR:
2147                 case DMA_TX_UNEXP_RETRANS_ERR:
2148                 case DMA_TX_XFER_LEN_OVERFLOW:
2149                 case DMA_TX_XFER_OFFSET_ERR:
2150                 case SIPC_RX_DATA_UNDERFLOW_ERR:
2151                 case DMA_RX_DATA_SGL_OVERFLOW:
2152                 case DMA_RX_DATA_OFFSET_ERR:
2153                 case DMA_RX_RDSETUP_LEN_ODD_ERR:
2154                 case DMA_RX_RDSETUP_LEN_ZERO_ERR:
2155                 case DMA_RX_RDSETUP_LEN_OVER_ERR:
2156                 case DMA_RX_SATA_FRAME_TYPE_ERR:
2157                 case DMA_RX_UNKNOWN_FRM_ERR:
2158                 {
2159                         /* This will request a retry */
2160                         ts->stat = SAS_QUEUE_FULL;
2161                         slot->abort = 1;
2162                         break;
2163                 }
2164                 default:
2165                         break;
2166                 }
2167         }
2168                 break;
2169         case SAS_PROTOCOL_SMP:
2170                 ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
2171                 break;
2172
2173         case SAS_PROTOCOL_SATA:
2174         case SAS_PROTOCOL_STP:
2175         case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
2176         {
2177                 switch (error) {
2178                 case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION:
2179                 {
2180                         ts->stat = SAS_OPEN_REJECT;
2181                         ts->open_rej_reason = SAS_OREJ_NO_DEST;
2182                         break;
2183                 }
2184                 case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER:
2185                 {
2186                         ts->resp = SAS_TASK_UNDELIVERED;
2187                         ts->stat = SAS_DEV_NO_RESPONSE;
2188                         break;
2189                 }
2190                 case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED:
2191                 {
2192                         ts->stat = SAS_OPEN_REJECT;
2193                         ts->open_rej_reason = SAS_OREJ_EPROTO;
2194                         break;
2195                 }
2196                 case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED:
2197                 {
2198                         ts->stat = SAS_OPEN_REJECT;
2199                         ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2200                         break;
2201                 }
2202                 case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION:
2203                 {
2204                         ts->stat = SAS_OPEN_REJECT;
2205                         ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2206                         break;
2207                 }
2208                 case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION:
2209                 {
2210                         ts->stat = SAS_OPEN_REJECT;
2211                         ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
2212                         break;
2213                 }
2214                 case DMA_RX_RESP_BUF_OVERFLOW:
2215                 case DMA_RX_UNEXP_NORM_RESP_ERR:
2216                 case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION:
2217                 {
2218                         ts->stat = SAS_OPEN_REJECT;
2219                         ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2220                         break;
2221                 }
2222                 case DMA_RX_DATA_LEN_OVERFLOW:
2223                 {
2224                         ts->stat = SAS_DATA_OVERRUN;
2225                         ts->residual = 0;
2226                         break;
2227                 }
2228                 case DMA_RX_DATA_LEN_UNDERFLOW:
2229                 {
2230                         ts->residual = trans_tx_fail_type;
2231                         ts->stat = SAS_DATA_UNDERRUN;
2232                         break;
2233                 }
2234                 case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS:
2235                 case TRANS_TX_ERR_PHY_NOT_ENABLE:
2236                 case TRANS_TX_OPEN_CNX_ERR_BY_OTHER:
2237                 case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT:
2238                 case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD:
2239                 case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED:
2240                 case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT:
2241                 case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED:
2242                 case TRANS_TX_ERR_WITH_BREAK_TIMEOUT:
2243                 case TRANS_TX_ERR_WITH_BREAK_REQUEST:
2244                 case TRANS_TX_ERR_WITH_BREAK_RECEVIED:
2245                 case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT:
2246                 case TRANS_TX_ERR_WITH_CLOSE_NORMAL:
2247                 case TRANS_TX_ERR_WITH_CLOSE_PHYDISALE:
2248                 case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT:
2249                 case TRANS_TX_ERR_WITH_CLOSE_COMINIT:
2250                 case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT:
2251                 case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT:
2252                 case TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS:
2253                 case TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT:
2254                 case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM:
2255                 case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR:
2256                 case TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR:
2257                 case TRANS_RX_ERR_WITH_RXFIS_CRC_ERR:
2258                 case TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN:
2259                 case TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP:
2260                 case TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN:
2261                 case TRANS_RX_ERR_WITH_BREAK_TIMEOUT:
2262                 case TRANS_RX_ERR_WITH_BREAK_REQUEST:
2263                 case TRANS_RX_ERR_WITH_BREAK_RECEVIED:
2264                 case TRANS_RX_ERR_WITH_CLOSE_NORMAL:
2265                 case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE:
2266                 case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT:
2267                 case TRANS_RX_ERR_WITH_CLOSE_COMINIT:
2268                 case TRANS_RX_ERR_WITH_DATA_LEN0:
2269                 case TRANS_RX_ERR_WITH_BAD_HASH:
2270                 case TRANS_RX_XRDY_WLEN_ZERO_ERR:
2271                 case TRANS_RX_ERR_WITH_BAD_FRM_TYPE:
2272                 case DMA_TX_DATA_SGL_OVERFLOW:
2273                 case DMA_TX_UNEXP_XFER_ERR:
2274                 case DMA_TX_UNEXP_RETRANS_ERR:
2275                 case DMA_TX_XFER_LEN_OVERFLOW:
2276                 case DMA_TX_XFER_OFFSET_ERR:
2277                 case SIPC_RX_FIS_STATUS_ERR_BIT_VLD:
2278                 case SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR:
2279                 case SIPC_RX_FIS_STATUS_BSY_BIT_ERR:
2280                 case SIPC_RX_WRSETUP_LEN_ODD_ERR:
2281                 case SIPC_RX_WRSETUP_LEN_ZERO_ERR:
2282                 case SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR:
2283                 case SIPC_RX_SATA_UNEXP_FIS_ERR:
2284                 case DMA_RX_DATA_SGL_OVERFLOW:
2285                 case DMA_RX_DATA_OFFSET_ERR:
2286                 case DMA_RX_SATA_FRAME_TYPE_ERR:
2287                 case DMA_RX_UNEXP_RDFRAME_ERR:
2288                 case DMA_RX_PIO_DATA_LEN_ERR:
2289                 case DMA_RX_RDSETUP_STATUS_ERR:
2290                 case DMA_RX_RDSETUP_STATUS_DRQ_ERR:
2291                 case DMA_RX_RDSETUP_STATUS_BSY_ERR:
2292                 case DMA_RX_RDSETUP_LEN_ODD_ERR:
2293                 case DMA_RX_RDSETUP_LEN_ZERO_ERR:
2294                 case DMA_RX_RDSETUP_LEN_OVER_ERR:
2295                 case DMA_RX_RDSETUP_OFFSET_ERR:
2296                 case DMA_RX_RDSETUP_ACTIVE_ERR:
2297                 case DMA_RX_RDSETUP_ESTATUS_ERR:
2298                 case DMA_RX_UNKNOWN_FRM_ERR:
2299                 case TRANS_RX_SSP_FRM_LEN_ERR:
2300                 case TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY:
2301                 {
2302                         slot->abort = 1;
2303                         ts->stat = SAS_PHY_DOWN;
2304                         break;
2305                 }
2306                 default:
2307                 {
2308                         ts->stat = SAS_PROTO_RESPONSE;
2309                         break;
2310                 }
2311                 }
2312                 hisi_sas_sata_done(task, slot);
2313         }
2314                 break;
2315         default:
2316                 break;
2317         }
2318 }
2319
2320 static void slot_complete_v2_hw(struct hisi_hba *hisi_hba,
2321                                 struct hisi_sas_slot *slot)
2322 {
2323         struct sas_task *task = slot->task;
2324         struct hisi_sas_device *sas_dev;
2325         struct device *dev = hisi_hba->dev;
2326         struct task_status_struct *ts;
2327         struct domain_device *device;
2328         struct sas_ha_struct *ha;
2329         struct hisi_sas_complete_v2_hdr *complete_queue =
2330                         hisi_hba->complete_hdr[slot->cmplt_queue];
2331         struct hisi_sas_complete_v2_hdr *complete_hdr =
2332                         &complete_queue[slot->cmplt_queue_slot];
2333         unsigned long flags;
2334         bool is_internal = slot->is_internal;
2335         u32 dw0;
2336
2337         if (unlikely(!task || !task->lldd_task || !task->dev))
2338                 return;
2339
2340         ts = &task->task_status;
2341         device = task->dev;
2342         ha = device->port->ha;
2343         sas_dev = device->lldd_dev;
2344
2345         spin_lock_irqsave(&task->task_state_lock, flags);
2346         task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
2347         spin_unlock_irqrestore(&task->task_state_lock, flags);
2348
2349         memset(ts, 0, sizeof(*ts));
2350         ts->resp = SAS_TASK_COMPLETE;
2351
2352         if (unlikely(!sas_dev)) {
2353                 dev_dbg(dev, "slot complete: port has no device\n");
2354                 ts->stat = SAS_PHY_DOWN;
2355                 goto out;
2356         }
2357
2358         /* Use SAS+TMF status codes */
2359         dw0 = le32_to_cpu(complete_hdr->dw0);
2360         switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >>
2361                 CMPLT_HDR_ABORT_STAT_OFF) {
2362         case STAT_IO_ABORTED:
2363                 /* this io has been aborted by abort command */
2364                 ts->stat = SAS_ABORTED_TASK;
2365                 goto out;
2366         case STAT_IO_COMPLETE:
2367                 /* internal abort command complete */
2368                 ts->stat = TMF_RESP_FUNC_SUCC;
2369                 del_timer_sync(&slot->internal_abort_timer);
2370                 goto out;
2371         case STAT_IO_NO_DEVICE:
2372                 ts->stat = TMF_RESP_FUNC_COMPLETE;
2373                 del_timer_sync(&slot->internal_abort_timer);
2374                 goto out;
2375         case STAT_IO_NOT_VALID:
2376                 /* abort single io, controller don't find
2377                  * the io need to abort
2378                  */
2379                 ts->stat = TMF_RESP_FUNC_FAILED;
2380                 del_timer_sync(&slot->internal_abort_timer);
2381                 goto out;
2382         default:
2383                 break;
2384         }
2385
2386         if ((dw0 & CMPLT_HDR_ERX_MSK) && (!(dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) {
2387                 u32 err_phase = (dw0 & CMPLT_HDR_ERR_PHASE_MSK)
2388                                 >> CMPLT_HDR_ERR_PHASE_OFF;
2389                 u32 *error_info = hisi_sas_status_buf_addr_mem(slot);
2390
2391                 /* Analyse error happens on which phase TX or RX */
2392                 if (ERR_ON_TX_PHASE(err_phase))
2393                         slot_err_v2_hw(hisi_hba, task, slot, 1);
2394                 else if (ERR_ON_RX_PHASE(err_phase))
2395                         slot_err_v2_hw(hisi_hba, task, slot, 2);
2396
2397                 if (ts->stat != SAS_DATA_UNDERRUN)
2398                         dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n",
2399                                  slot->idx, task, sas_dev->device_id,
2400                                  complete_hdr->dw0, complete_hdr->dw1,
2401                                  complete_hdr->act, complete_hdr->dw3,
2402                                  error_info[0], error_info[1],
2403                                  error_info[2], error_info[3]);
2404
2405                 if (unlikely(slot->abort)) {
2406                         if (dev_is_sata(device) && task->ata_task.use_ncq)
2407                                 sas_ata_device_link_abort(device, true);
2408                         else
2409                                 sas_task_abort(task);
2410
2411                         return;
2412                 }
2413                 goto out;
2414         }
2415
2416         switch (task->task_proto) {
2417         case SAS_PROTOCOL_SSP:
2418         {
2419                 struct hisi_sas_status_buffer *status_buffer =
2420                                 hisi_sas_status_buf_addr_mem(slot);
2421                 struct ssp_response_iu *iu = (struct ssp_response_iu *)
2422                                 &status_buffer->iu[0];
2423
2424                 sas_ssp_task_response(dev, task, iu);
2425                 break;
2426         }
2427         case SAS_PROTOCOL_SMP:
2428         {
2429                 struct scatterlist *sg_resp = &task->smp_task.smp_resp;
2430                 void *to = page_address(sg_page(sg_resp));
2431
2432                 ts->stat = SAS_SAM_STAT_GOOD;
2433
2434                 memcpy(to + sg_resp->offset,
2435                        hisi_sas_status_buf_addr_mem(slot) +
2436                        sizeof(struct hisi_sas_err_record),
2437                        sg_resp->length);
2438                 break;
2439         }
2440         case SAS_PROTOCOL_SATA:
2441         case SAS_PROTOCOL_STP:
2442         case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
2443         {
2444                 ts->stat = SAS_SAM_STAT_GOOD;
2445                 hisi_sas_sata_done(task, slot);
2446                 break;
2447         }
2448         default:
2449                 ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
2450                 break;
2451         }
2452
2453         if (!slot->port->port_attached) {
2454                 dev_warn(dev, "slot complete: port %d has removed\n",
2455                         slot->port->sas_port.id);
2456                 ts->stat = SAS_PHY_DOWN;
2457         }
2458
2459 out:
2460         spin_lock_irqsave(&task->task_state_lock, flags);
2461         if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
2462                 spin_unlock_irqrestore(&task->task_state_lock, flags);
2463                 dev_info(dev, "slot complete: task(%pK) aborted\n", task);
2464                 return;
2465         }
2466         task->task_state_flags |= SAS_TASK_STATE_DONE;
2467         spin_unlock_irqrestore(&task->task_state_lock, flags);
2468         hisi_sas_slot_task_free(hisi_hba, task, slot, true);
2469
2470         if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
2471                 spin_lock_irqsave(&device->done_lock, flags);
2472                 if (test_bit(SAS_HA_FROZEN, &ha->state)) {
2473                         spin_unlock_irqrestore(&device->done_lock, flags);
2474                         dev_info(dev, "slot complete: task(%pK) ignored\n",
2475                                  task);
2476                         return;
2477                 }
2478                 spin_unlock_irqrestore(&device->done_lock, flags);
2479         }
2480
2481         if (task->task_done)
2482                 task->task_done(task);
2483 }
2484
2485 static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
2486                           struct hisi_sas_slot *slot)
2487 {
2488         struct sas_task *task = slot->task;
2489         struct domain_device *device = task->dev;
2490         struct domain_device *parent_dev = device->parent;
2491         struct hisi_sas_device *sas_dev = device->lldd_dev;
2492         struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
2493         struct asd_sas_port *sas_port = device->port;
2494         struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
2495         struct sas_ata_task *ata_task = &task->ata_task;
2496         struct sas_tmf_task *tmf = slot->tmf;
2497         u8 *buf_cmd;
2498         int has_data = 0, hdr_tag = 0;
2499         u32 dw0, dw1 = 0, dw2 = 0;
2500
2501         /* create header */
2502         /* dw0 */
2503         dw0 = port->id << CMD_HDR_PORT_OFF;
2504         if (parent_dev && dev_is_expander(parent_dev->dev_type))
2505                 dw0 |= 3 << CMD_HDR_CMD_OFF;
2506         else
2507                 dw0 |= 4 << CMD_HDR_CMD_OFF;
2508
2509         if (tmf && ata_task->force_phy) {
2510                 dw0 |= CMD_HDR_FORCE_PHY_MSK;
2511                 dw0 |= (1 << ata_task->force_phy_id) << CMD_HDR_PHY_ID_OFF;
2512         }
2513
2514         hdr->dw0 = cpu_to_le32(dw0);
2515
2516         /* dw1 */
2517         switch (task->data_dir) {
2518         case DMA_TO_DEVICE:
2519                 has_data = 1;
2520                 dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
2521                 break;
2522         case DMA_FROM_DEVICE:
2523                 has_data = 1;
2524                 dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
2525                 break;
2526         default:
2527                 dw1 &= ~CMD_HDR_DIR_MSK;
2528         }
2529
2530         if ((task->ata_task.fis.command == ATA_CMD_DEV_RESET) &&
2531                         (task->ata_task.fis.control & ATA_SRST))
2532                 dw1 |= 1 << CMD_HDR_RESET_OFF;
2533
2534         dw1 |= (hisi_sas_get_ata_protocol(
2535                 &task->ata_task.fis, task->data_dir))
2536                 << CMD_HDR_FRAME_TYPE_OFF;
2537         dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
2538         hdr->dw1 = cpu_to_le32(dw1);
2539
2540         /* dw2 */
2541         if (task->ata_task.use_ncq) {
2542                 struct ata_queued_cmd *qc = task->uldd_task;
2543
2544                 hdr_tag = qc->tag;
2545                 task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
2546                 dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
2547         }
2548
2549         dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF |
2550                         2 << CMD_HDR_SG_MOD_OFF;
2551         hdr->dw2 = cpu_to_le32(dw2);
2552
2553         /* dw3 */
2554         hdr->transfer_tags = cpu_to_le32(slot->idx);
2555
2556         if (has_data)
2557                 prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter,
2558                                         slot->n_elem);
2559
2560         hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
2561         hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
2562         hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
2563
2564         buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot);
2565
2566         if (likely(!task->ata_task.device_control_reg_update))
2567                 task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
2568         /* fill in command FIS */
2569         memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
2570 }
2571
2572 static void hisi_sas_internal_abort_quirk_timeout(struct timer_list *t)
2573 {
2574         struct hisi_sas_slot *slot = from_timer(slot, t, internal_abort_timer);
2575         struct hisi_sas_port *port = slot->port;
2576         struct asd_sas_port *asd_sas_port;
2577         struct asd_sas_phy *sas_phy;
2578
2579         if (!port)
2580                 return;
2581
2582         asd_sas_port = &port->sas_port;
2583
2584         /* Kick the hardware - send break command */
2585         list_for_each_entry(sas_phy, &asd_sas_port->phy_list, port_phy_el) {
2586                 struct hisi_sas_phy *phy = sas_phy->lldd_phy;
2587                 struct hisi_hba *hisi_hba = phy->hisi_hba;
2588                 int phy_no = sas_phy->id;
2589                 u32 link_dfx2;
2590
2591                 link_dfx2 = hisi_sas_phy_read32(hisi_hba, phy_no, LINK_DFX2);
2592                 if ((link_dfx2 == LINK_DFX2_RCVR_HOLD_STS_MSK) ||
2593                     (link_dfx2 & LINK_DFX2_SEND_HOLD_STS_MSK)) {
2594                         u32 txid_auto;
2595
2596                         txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no,
2597                                                         TXID_AUTO);
2598                         txid_auto |= TXID_AUTO_CTB_MSK;
2599                         hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
2600                                              txid_auto);
2601                         return;
2602                 }
2603         }
2604 }
2605
2606 static void prep_abort_v2_hw(struct hisi_hba *hisi_hba,
2607                              struct hisi_sas_slot *slot)
2608 {
2609         struct sas_task *task = slot->task;
2610         struct sas_internal_abort_task *abort = &task->abort_task;
2611         struct domain_device *dev = task->dev;
2612         struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
2613         struct hisi_sas_port *port = slot->port;
2614         struct timer_list *timer = &slot->internal_abort_timer;
2615         struct hisi_sas_device *sas_dev = dev->lldd_dev;
2616
2617         /* setup the quirk timer */
2618         timer_setup(timer, hisi_sas_internal_abort_quirk_timeout, 0);
2619         /* Set the timeout to 10ms less than internal abort timeout */
2620         mod_timer(timer, jiffies + msecs_to_jiffies(100));
2621
2622         /* dw0 */
2623         hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
2624                                (port->id << CMD_HDR_PORT_OFF) |
2625                                (dev_is_sata(dev) <<
2626                                 CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
2627                                (abort->type << CMD_HDR_ABORT_FLAG_OFF));
2628
2629         /* dw1 */
2630         hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEV_ID_OFF);
2631
2632         /* dw7 */
2633         hdr->dw7 = cpu_to_le32(abort->tag << CMD_HDR_ABORT_IPTT_OFF);
2634         hdr->transfer_tags = cpu_to_le32(slot->idx);
2635 }
2636
2637 static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
2638 {
2639         int i, res = IRQ_HANDLED;
2640         u32 port_id, link_rate;
2641         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
2642         struct asd_sas_phy *sas_phy = &phy->sas_phy;
2643         struct device *dev = hisi_hba->dev;
2644         u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
2645         struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
2646
2647         hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
2648
2649         if (is_sata_phy_v2_hw(hisi_hba, phy_no))
2650                 goto end;
2651
2652         del_timer(&phy->timer);
2653
2654         if (phy_no == 8) {
2655                 u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
2656
2657                 port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
2658                           PORT_STATE_PHY8_PORT_NUM_OFF;
2659                 link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
2660                             PORT_STATE_PHY8_CONN_RATE_OFF;
2661         } else {
2662                 port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
2663                 port_id = (port_id >> (4 * phy_no)) & 0xf;
2664                 link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
2665                 link_rate = (link_rate >> (phy_no * 4)) & 0xf;
2666         }
2667
2668         if (port_id == 0xf) {
2669                 dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
2670                 res = IRQ_NONE;
2671                 goto end;
2672         }
2673
2674         for (i = 0; i < 6; i++) {
2675                 u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
2676                                                RX_IDAF_DWORD0 + (i * 4));
2677                 frame_rcvd[i] = __swab32(idaf);
2678         }
2679
2680         sas_phy->linkrate = link_rate;
2681         sas_phy->oob_mode = SAS_OOB_MODE;
2682         memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE);
2683         dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
2684         phy->port_id = port_id;
2685         phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
2686         phy->phy_type |= PORT_TYPE_SAS;
2687         phy->phy_attached = 1;
2688         phy->identify.device_type = id->dev_type;
2689         phy->frame_rcvd_size =  sizeof(struct sas_identify_frame);
2690         if (phy->identify.device_type == SAS_END_DEVICE)
2691                 phy->identify.target_port_protocols =
2692                         SAS_PROTOCOL_SSP;
2693         else if (phy->identify.device_type != SAS_PHY_UNUSED) {
2694                 phy->identify.target_port_protocols =
2695                         SAS_PROTOCOL_SMP;
2696                 if (!timer_pending(&hisi_hba->timer))
2697                         set_link_timer_quirk(hisi_hba);
2698         }
2699         hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
2700 end:
2701         if (phy->reset_completion)
2702                 complete(phy->reset_completion);
2703         hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
2704                              CHL_INT0_SL_PHY_ENABLE_MSK);
2705         hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0);
2706
2707         return res;
2708 }
2709
2710 static bool check_any_wideports_v2_hw(struct hisi_hba *hisi_hba)
2711 {
2712         u32 port_state;
2713
2714         port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
2715         if (port_state & 0x1ff)
2716                 return true;
2717
2718         return false;
2719 }
2720
2721 static int phy_down_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
2722 {
2723         u32 phy_state, sl_ctrl, txid_auto;
2724         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
2725         struct hisi_sas_port *port = phy->port;
2726         struct device *dev = hisi_hba->dev;
2727
2728         del_timer(&phy->timer);
2729         hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1);
2730
2731         phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
2732         dev_info(dev, "phydown: phy%d phy_state=0x%x\n", phy_no, phy_state);
2733         hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0,
2734                           GFP_ATOMIC);
2735
2736         sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
2737         hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL,
2738                              sl_ctrl & ~SL_CONTROL_CTA_MSK);
2739         if (port && !get_wideport_bitmap_v2_hw(hisi_hba, port->id))
2740                 if (!check_any_wideports_v2_hw(hisi_hba) &&
2741                                 timer_pending(&hisi_hba->timer))
2742                         del_timer(&hisi_hba->timer);
2743
2744         txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
2745         hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
2746                              txid_auto | TXID_AUTO_CT3_MSK);
2747
2748         hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
2749         hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
2750
2751         return IRQ_HANDLED;
2752 }
2753
2754 static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p)
2755 {
2756         struct hisi_hba *hisi_hba = p;
2757         u32 irq_msk;
2758         int phy_no = 0;
2759         irqreturn_t res = IRQ_NONE;
2760
2761         irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO)
2762                    >> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff;
2763         while (irq_msk) {
2764                 if (irq_msk  & 1) {
2765                         u32 reg_value = hisi_sas_phy_read32(hisi_hba, phy_no,
2766                                             CHL_INT0);
2767
2768                         switch (reg_value & (CHL_INT0_NOT_RDY_MSK |
2769                                         CHL_INT0_SL_PHY_ENABLE_MSK)) {
2770
2771                         case CHL_INT0_SL_PHY_ENABLE_MSK:
2772                                 /* phy up */
2773                                 if (phy_up_v2_hw(phy_no, hisi_hba) ==
2774                                     IRQ_HANDLED)
2775                                         res = IRQ_HANDLED;
2776                                 break;
2777
2778                         case CHL_INT0_NOT_RDY_MSK:
2779                                 /* phy down */
2780                                 if (phy_down_v2_hw(phy_no, hisi_hba) ==
2781                                     IRQ_HANDLED)
2782                                         res = IRQ_HANDLED;
2783                                 break;
2784
2785                         case (CHL_INT0_NOT_RDY_MSK |
2786                                         CHL_INT0_SL_PHY_ENABLE_MSK):
2787                                 reg_value = hisi_sas_read32(hisi_hba,
2788                                                 PHY_STATE);
2789                                 if (reg_value & BIT(phy_no)) {
2790                                         /* phy up */
2791                                         if (phy_up_v2_hw(phy_no, hisi_hba) ==
2792                                             IRQ_HANDLED)
2793                                                 res = IRQ_HANDLED;
2794                                 } else {
2795                                         /* phy down */
2796                                         if (phy_down_v2_hw(phy_no, hisi_hba) ==
2797                                             IRQ_HANDLED)
2798                                                 res = IRQ_HANDLED;
2799                                 }
2800                                 break;
2801
2802                         default:
2803                                 break;
2804                         }
2805
2806                 }
2807                 irq_msk >>= 1;
2808                 phy_no++;
2809         }
2810
2811         return res;
2812 }
2813
2814 static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
2815 {
2816         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
2817         u32 bcast_status;
2818
2819         hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
2820         bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
2821         if (bcast_status & RX_BCAST_CHG_MSK)
2822                 hisi_sas_phy_bcast(phy);
2823         hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
2824                              CHL_INT0_SL_RX_BCST_ACK_MSK);
2825         hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
2826 }
2827
2828 static const struct hisi_sas_hw_error port_ecc_axi_error[] = {
2829         {
2830                 .irq_msk = BIT(CHL_INT1_DMAC_TX_ECC_ERR_OFF),
2831                 .msg = "dmac_tx_ecc_bad_err",
2832         },
2833         {
2834                 .irq_msk = BIT(CHL_INT1_DMAC_RX_ECC_ERR_OFF),
2835                 .msg = "dmac_rx_ecc_bad_err",
2836         },
2837         {
2838                 .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF),
2839                 .msg = "dma_tx_axi_wr_err",
2840         },
2841         {
2842                 .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF),
2843                 .msg = "dma_tx_axi_rd_err",
2844         },
2845         {
2846                 .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF),
2847                 .msg = "dma_rx_axi_wr_err",
2848         },
2849         {
2850                 .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF),
2851                 .msg = "dma_rx_axi_rd_err",
2852         },
2853 };
2854
2855 static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
2856 {
2857         struct hisi_hba *hisi_hba = p;
2858         struct device *dev = hisi_hba->dev;
2859         u32 ent_msk, ent_tmp, irq_msk;
2860         int phy_no = 0;
2861
2862         ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
2863         ent_tmp = ent_msk;
2864         ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK;
2865         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk);
2866
2867         irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) >>
2868                         HGC_INVLD_DQE_INFO_FB_CH3_OFF) & 0x1ff;
2869
2870         while (irq_msk) {
2871                 u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
2872                                                      CHL_INT0);
2873                 u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
2874                                                      CHL_INT1);
2875                 u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
2876                                                      CHL_INT2);
2877
2878                 if ((irq_msk & (1 << phy_no)) && irq_value1) {
2879                         int i;
2880
2881                         for (i = 0; i < ARRAY_SIZE(port_ecc_axi_error); i++) {
2882                                 const struct hisi_sas_hw_error *error =
2883                                                 &port_ecc_axi_error[i];
2884
2885                                 if (!(irq_value1 & error->irq_msk))
2886                                         continue;
2887
2888                                 dev_warn(dev, "%s error (phy%d 0x%x) found!\n",
2889                                         error->msg, phy_no, irq_value1);
2890                                 queue_work(hisi_hba->wq, &hisi_hba->rst_work);
2891                         }
2892
2893                         hisi_sas_phy_write32(hisi_hba, phy_no,
2894                                              CHL_INT1, irq_value1);
2895                 }
2896
2897                 if ((irq_msk & (1 << phy_no)) && irq_value2) {
2898                         struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
2899
2900                         if (irq_value2 & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
2901                                 dev_warn(dev, "phy%d identify timeout\n",
2902                                          phy_no);
2903                                 hisi_sas_notify_phy_event(phy,
2904                                                 HISI_PHYE_LINK_RESET);
2905                         }
2906
2907                         hisi_sas_phy_write32(hisi_hba, phy_no,
2908                                                  CHL_INT2, irq_value2);
2909                 }
2910
2911                 if ((irq_msk & (1 << phy_no)) && irq_value0) {
2912                         if (irq_value0 & CHL_INT0_SL_RX_BCST_ACK_MSK)
2913                                 phy_bcast_v2_hw(phy_no, hisi_hba);
2914
2915                         if (irq_value0 & CHL_INT0_PHY_RDY_MSK)
2916                                 hisi_sas_phy_oob_ready(hisi_hba, phy_no);
2917
2918                         hisi_sas_phy_write32(hisi_hba, phy_no,
2919                                         CHL_INT0, irq_value0
2920                                         & (~CHL_INT0_HOTPLUG_TOUT_MSK)
2921                                         & (~CHL_INT0_SL_PHY_ENABLE_MSK)
2922                                         & (~CHL_INT0_NOT_RDY_MSK));
2923                 }
2924                 irq_msk &= ~(1 << phy_no);
2925                 phy_no++;
2926         }
2927
2928         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp);
2929
2930         return IRQ_HANDLED;
2931 }
2932
2933 static void
2934 one_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, u32 irq_value)
2935 {
2936         struct device *dev = hisi_hba->dev;
2937         const struct hisi_sas_hw_error *ecc_error;
2938         u32 val;
2939         int i;
2940
2941         for (i = 0; i < ARRAY_SIZE(one_bit_ecc_errors); i++) {
2942                 ecc_error = &one_bit_ecc_errors[i];
2943                 if (irq_value & ecc_error->irq_msk) {
2944                         val = hisi_sas_read32(hisi_hba, ecc_error->reg);
2945                         val &= ecc_error->msk;
2946                         val >>= ecc_error->shift;
2947                         dev_warn(dev, "%s found: mem addr is 0x%08X\n",
2948                                  ecc_error->msg, val);
2949                 }
2950         }
2951 }
2952
2953 static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba,
2954                 u32 irq_value)
2955 {
2956         struct device *dev = hisi_hba->dev;
2957         const struct hisi_sas_hw_error *ecc_error;
2958         u32 val;
2959         int i;
2960
2961         for (i = 0; i < ARRAY_SIZE(multi_bit_ecc_errors); i++) {
2962                 ecc_error = &multi_bit_ecc_errors[i];
2963                 if (irq_value & ecc_error->irq_msk) {
2964                         val = hisi_sas_read32(hisi_hba, ecc_error->reg);
2965                         val &= ecc_error->msk;
2966                         val >>= ecc_error->shift;
2967                         dev_err(dev, "%s (0x%x) found: mem addr is 0x%08X\n",
2968                                 ecc_error->msg, irq_value, val);
2969                         queue_work(hisi_hba->wq, &hisi_hba->rst_work);
2970                 }
2971         }
2972
2973         return;
2974 }
2975
2976 static irqreturn_t fatal_ecc_int_v2_hw(int irq_no, void *p)
2977 {
2978         struct hisi_hba *hisi_hba = p;
2979         u32 irq_value, irq_msk;
2980
2981         irq_msk = hisi_sas_read32(hisi_hba, SAS_ECC_INTR_MSK);
2982         hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk | 0xffffffff);
2983
2984         irq_value = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
2985         if (irq_value) {
2986                 one_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
2987                 multi_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
2988         }
2989
2990         hisi_sas_write32(hisi_hba, SAS_ECC_INTR, irq_value);
2991         hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk);
2992
2993         return IRQ_HANDLED;
2994 }
2995
2996 static const struct hisi_sas_hw_error axi_error[] = {
2997         { .msk = BIT(0), .msg = "IOST_AXI_W_ERR" },
2998         { .msk = BIT(1), .msg = "IOST_AXI_R_ERR" },
2999         { .msk = BIT(2), .msg = "ITCT_AXI_W_ERR" },
3000         { .msk = BIT(3), .msg = "ITCT_AXI_R_ERR" },
3001         { .msk = BIT(4), .msg = "SATA_AXI_W_ERR" },
3002         { .msk = BIT(5), .msg = "SATA_AXI_R_ERR" },
3003         { .msk = BIT(6), .msg = "DQE_AXI_R_ERR" },
3004         { .msk = BIT(7), .msg = "CQE_AXI_W_ERR" },
3005         {}
3006 };
3007
3008 static const struct hisi_sas_hw_error fifo_error[] = {
3009         { .msk = BIT(8),  .msg = "CQE_WINFO_FIFO" },
3010         { .msk = BIT(9),  .msg = "CQE_MSG_FIFIO" },
3011         { .msk = BIT(10), .msg = "GETDQE_FIFO" },
3012         { .msk = BIT(11), .msg = "CMDP_FIFO" },
3013         { .msk = BIT(12), .msg = "AWTCTRL_FIFO" },
3014         {}
3015 };
3016
3017 static const struct hisi_sas_hw_error fatal_axi_errors[] = {
3018         {
3019                 .irq_msk = BIT(ENT_INT_SRC3_WP_DEPTH_OFF),
3020                 .msg = "write pointer and depth",
3021         },
3022         {
3023                 .irq_msk = BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF),
3024                 .msg = "iptt no match slot",
3025         },
3026         {
3027                 .irq_msk = BIT(ENT_INT_SRC3_RP_DEPTH_OFF),
3028                 .msg = "read pointer and depth",
3029         },
3030         {
3031                 .irq_msk = BIT(ENT_INT_SRC3_AXI_OFF),
3032                 .reg = HGC_AXI_FIFO_ERR_INFO,
3033                 .sub = axi_error,
3034         },
3035         {
3036                 .irq_msk = BIT(ENT_INT_SRC3_FIFO_OFF),
3037                 .reg = HGC_AXI_FIFO_ERR_INFO,
3038                 .sub = fifo_error,
3039         },
3040         {
3041                 .irq_msk = BIT(ENT_INT_SRC3_LM_OFF),
3042                 .msg = "LM add/fetch list",
3043         },
3044         {
3045                 .irq_msk = BIT(ENT_INT_SRC3_ABT_OFF),
3046                 .msg = "SAS_HGC_ABT fetch LM list",
3047         },
3048 };
3049
3050 static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
3051 {
3052         struct hisi_hba *hisi_hba = p;
3053         u32 irq_value, irq_msk, err_value;
3054         struct device *dev = hisi_hba->dev;
3055         const struct hisi_sas_hw_error *axi_error;
3056         int i;
3057
3058         irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
3059         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0xfffffffe);
3060
3061         irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
3062
3063         for (i = 0; i < ARRAY_SIZE(fatal_axi_errors); i++) {
3064                 axi_error = &fatal_axi_errors[i];
3065                 if (!(irq_value & axi_error->irq_msk))
3066                         continue;
3067
3068                 hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
3069                                  1 << axi_error->shift);
3070                 if (axi_error->sub) {
3071                         const struct hisi_sas_hw_error *sub = axi_error->sub;
3072
3073                         err_value = hisi_sas_read32(hisi_hba, axi_error->reg);
3074                         for (; sub->msk || sub->msg; sub++) {
3075                                 if (!(err_value & sub->msk))
3076                                         continue;
3077                                 dev_err(dev, "%s (0x%x) found!\n",
3078                                         sub->msg, irq_value);
3079                                 queue_work(hisi_hba->wq, &hisi_hba->rst_work);
3080                         }
3081                 } else {
3082                         dev_err(dev, "%s (0x%x) found!\n",
3083                                 axi_error->msg, irq_value);
3084                         queue_work(hisi_hba->wq, &hisi_hba->rst_work);
3085                 }
3086         }
3087
3088         if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
3089                 u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
3090                 u32 dev_id = reg_val & ITCT_DEV_MSK;
3091                 struct hisi_sas_device *sas_dev = &hisi_hba->devices[dev_id];
3092
3093                 hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
3094                 dev_dbg(dev, "clear ITCT ok\n");
3095                 complete(sas_dev->completion);
3096         }
3097
3098         hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value);
3099         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
3100
3101         return IRQ_HANDLED;
3102 }
3103
3104 static irqreturn_t  cq_thread_v2_hw(int irq_no, void *p)
3105 {
3106         struct hisi_sas_cq *cq = p;
3107         struct hisi_hba *hisi_hba = cq->hisi_hba;
3108         struct hisi_sas_slot *slot;
3109         struct hisi_sas_itct *itct;
3110         struct hisi_sas_complete_v2_hdr *complete_queue;
3111         u32 rd_point = cq->rd_point, wr_point, dev_id;
3112         int queue = cq->id;
3113
3114         if (unlikely(hisi_hba->reject_stp_links_msk))
3115                 phys_try_accept_stp_links_v2_hw(hisi_hba);
3116
3117         complete_queue = hisi_hba->complete_hdr[queue];
3118
3119         wr_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_WR_PTR +
3120                                    (0x14 * queue));
3121
3122         while (rd_point != wr_point) {
3123                 struct hisi_sas_complete_v2_hdr *complete_hdr;
3124                 int iptt;
3125
3126                 complete_hdr = &complete_queue[rd_point];
3127
3128                 /* Check for NCQ completion */
3129                 if (complete_hdr->act) {
3130                         u32 act_tmp = le32_to_cpu(complete_hdr->act);
3131                         int ncq_tag_count = ffs(act_tmp);
3132                         u32 dw1 = le32_to_cpu(complete_hdr->dw1);
3133
3134                         dev_id = (dw1 & CMPLT_HDR_DEV_ID_MSK) >>
3135                                  CMPLT_HDR_DEV_ID_OFF;
3136                         itct = &hisi_hba->itct[dev_id];
3137
3138                         /* The NCQ tags are held in the itct header */
3139                         while (ncq_tag_count) {
3140                                 __le64 *_ncq_tag = &itct->qw4_15[0], __ncq_tag;
3141                                 u64 ncq_tag;
3142
3143                                 ncq_tag_count--;
3144                                 __ncq_tag = _ncq_tag[ncq_tag_count / 5];
3145                                 ncq_tag = le64_to_cpu(__ncq_tag);
3146                                 iptt = (ncq_tag >> (ncq_tag_count % 5) * 12) &
3147                                        0xfff;
3148
3149                                 slot = &hisi_hba->slot_info[iptt];
3150                                 slot->cmplt_queue_slot = rd_point;
3151                                 slot->cmplt_queue = queue;
3152                                 slot_complete_v2_hw(hisi_hba, slot);
3153
3154                                 act_tmp &= ~(1 << ncq_tag_count);
3155                                 ncq_tag_count = ffs(act_tmp);
3156                         }
3157                 } else {
3158                         u32 dw1 = le32_to_cpu(complete_hdr->dw1);
3159
3160                         iptt = dw1 & CMPLT_HDR_IPTT_MSK;
3161                         slot = &hisi_hba->slot_info[iptt];
3162                         slot->cmplt_queue_slot = rd_point;
3163                         slot->cmplt_queue = queue;
3164                         slot_complete_v2_hw(hisi_hba, slot);
3165                 }
3166
3167                 if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
3168                         rd_point = 0;
3169         }
3170
3171         /* update rd_point */
3172         cq->rd_point = rd_point;
3173         hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
3174
3175         return IRQ_HANDLED;
3176 }
3177
3178 static irqreturn_t cq_interrupt_v2_hw(int irq_no, void *p)
3179 {
3180         struct hisi_sas_cq *cq = p;
3181         struct hisi_hba *hisi_hba = cq->hisi_hba;
3182         int queue = cq->id;
3183
3184         hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
3185
3186         return IRQ_WAKE_THREAD;
3187 }
3188
3189 static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
3190 {
3191         struct hisi_sas_phy *phy = p;
3192         struct hisi_hba *hisi_hba = phy->hisi_hba;
3193         struct asd_sas_phy *sas_phy = &phy->sas_phy;
3194         struct device *dev = hisi_hba->dev;
3195         struct  hisi_sas_initial_fis *initial_fis;
3196         struct dev_to_host_fis *fis;
3197         u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
3198         irqreturn_t res = IRQ_HANDLED;
3199         u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
3200         int phy_no, offset;
3201
3202         del_timer(&phy->timer);
3203
3204         phy_no = sas_phy->id;
3205         initial_fis = &hisi_hba->initial_fis[phy_no];
3206         fis = &initial_fis->fis;
3207
3208         offset = 4 * (phy_no / 4);
3209         ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1 + offset);
3210         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset,
3211                          ent_msk | 1 << ((phy_no % 4) * 8));
3212
3213         ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1 + offset);
3214         ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF *
3215                              (phy_no % 4)));
3216         ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
3217         if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
3218                 dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
3219                 res = IRQ_NONE;
3220                 goto end;
3221         }
3222
3223         /* check ERR bit of Status Register */
3224         if (fis->status & ATA_ERR) {
3225                 dev_warn(dev, "sata int: phy%d FIS status: 0x%x\n", phy_no,
3226                          fis->status);
3227                 hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
3228                 res = IRQ_NONE;
3229                 goto end;
3230         }
3231
3232         if (unlikely(phy_no == 8)) {
3233                 u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
3234
3235                 port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
3236                           PORT_STATE_PHY8_PORT_NUM_OFF;
3237                 link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
3238                             PORT_STATE_PHY8_CONN_RATE_OFF;
3239         } else {
3240                 port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
3241                 port_id = (port_id >> (4 * phy_no)) & 0xf;
3242                 link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
3243                 link_rate = (link_rate >> (phy_no * 4)) & 0xf;
3244         }
3245
3246         if (port_id == 0xf) {
3247                 dev_err(dev, "sata int: phy%d invalid portid\n", phy_no);
3248                 res = IRQ_NONE;
3249                 goto end;
3250         }
3251
3252         sas_phy->linkrate = link_rate;
3253         hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
3254                                                 HARD_PHY_LINKRATE);
3255         phy->maximum_linkrate = hard_phy_linkrate & 0xf;
3256         phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
3257
3258         sas_phy->oob_mode = SATA_OOB_MODE;
3259         /* Make up some unique SAS address */
3260         attached_sas_addr[0] = 0x50;
3261         attached_sas_addr[6] = hisi_hba->shost->host_no;
3262         attached_sas_addr[7] = phy_no;
3263         memcpy(sas_phy->attached_sas_addr, attached_sas_addr, SAS_ADDR_SIZE);
3264         memcpy(sas_phy->frame_rcvd, fis, sizeof(struct dev_to_host_fis));
3265         dev_info(dev, "sata int phyup: phy%d link_rate=%d\n", phy_no, link_rate);
3266         phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
3267         phy->port_id = port_id;
3268         phy->phy_type |= PORT_TYPE_SATA;
3269         phy->phy_attached = 1;
3270         phy->identify.device_type = SAS_SATA_DEV;
3271         phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
3272         phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
3273         hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
3274
3275         if (phy->reset_completion)
3276                 complete(phy->reset_completion);
3277 end:
3278         hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp);
3279         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk);
3280
3281         return res;
3282 }
3283
3284 static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
3285         int_phy_updown_v2_hw,
3286         int_chnl_int_v2_hw,
3287 };
3288
3289 static irq_handler_t fatal_interrupts[HISI_SAS_FATAL_INT_NR] = {
3290         fatal_ecc_int_v2_hw,
3291         fatal_axi_int_v2_hw
3292 };
3293
3294 #define CQ0_IRQ_INDEX (96)
3295
3296 static int hisi_sas_v2_interrupt_preinit(struct hisi_hba *hisi_hba)
3297 {
3298         struct platform_device *pdev = hisi_hba->platform_dev;
3299         struct Scsi_Host *shost = hisi_hba->shost;
3300         struct irq_affinity desc = {
3301                 .pre_vectors = CQ0_IRQ_INDEX,
3302                 .post_vectors = 16,
3303         };
3304         int resv = desc.pre_vectors + desc.post_vectors, minvec = resv + 1, nvec;
3305
3306         nvec = devm_platform_get_irqs_affinity(pdev, &desc, minvec, 128,
3307                                                &hisi_hba->irq_map);
3308         if (nvec < 0)
3309                 return nvec;
3310
3311         shost->nr_hw_queues = hisi_hba->cq_nvecs = nvec - resv;
3312
3313         return 0;
3314 }
3315
3316 /*
3317  * There is a limitation in the hip06 chipset that we need
3318  * to map in all mbigen interrupts, even if they are not used.
3319  */
3320 static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
3321 {
3322         struct platform_device *pdev = hisi_hba->platform_dev;
3323         struct device *dev = &pdev->dev;
3324         int irq, rc = 0;
3325         int i, phy_no, fatal_no, queue_no;
3326
3327         for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) {
3328                 irq = hisi_hba->irq_map[i + 1]; /* Phy up/down is irq1 */
3329                 rc = devm_request_irq(dev, irq, phy_interrupts[i], 0,
3330                                       DRV_NAME " phy", hisi_hba);
3331                 if (rc) {
3332                         dev_err(dev, "irq init: could not request phy interrupt %d, rc=%d\n",
3333                                 irq, rc);
3334                         rc = -ENOENT;
3335                         goto err_out;
3336                 }
3337         }
3338
3339         for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
3340                 struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
3341
3342                 irq = hisi_hba->irq_map[phy_no + 72];
3343                 rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0,
3344                                       DRV_NAME " sata", phy);
3345                 if (rc) {
3346                         dev_err(dev, "irq init: could not request sata interrupt %d, rc=%d\n",
3347                                 irq, rc);
3348                         rc = -ENOENT;
3349                         goto err_out;
3350                 }
3351         }
3352
3353         for (fatal_no = 0; fatal_no < HISI_SAS_FATAL_INT_NR; fatal_no++) {
3354                 irq = hisi_hba->irq_map[fatal_no + 81];
3355                 rc = devm_request_irq(dev, irq, fatal_interrupts[fatal_no], 0,
3356                                       DRV_NAME " fatal", hisi_hba);
3357                 if (rc) {
3358                         dev_err(dev, "irq init: could not request fatal interrupt %d, rc=%d\n",
3359                                 irq, rc);
3360                         rc = -ENOENT;
3361                         goto err_out;
3362                 }
3363         }
3364
3365         for (queue_no = 0; queue_no < hisi_hba->cq_nvecs; queue_no++) {
3366                 struct hisi_sas_cq *cq = &hisi_hba->cq[queue_no];
3367
3368                 cq->irq_no = hisi_hba->irq_map[queue_no + 96];
3369                 rc = devm_request_threaded_irq(dev, cq->irq_no,
3370                                                cq_interrupt_v2_hw,
3371                                                cq_thread_v2_hw, IRQF_ONESHOT,
3372                                                DRV_NAME " cq", cq);
3373                 if (rc) {
3374                         dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
3375                                         cq->irq_no, rc);
3376                         rc = -ENOENT;
3377                         goto err_out;
3378                 }
3379                 cq->irq_mask = irq_get_affinity_mask(cq->irq_no);
3380         }
3381 err_out:
3382         return rc;
3383 }
3384
3385 static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
3386 {
3387         int rc;
3388
3389         memset(hisi_hba->sata_dev_bitmap, 0, sizeof(hisi_hba->sata_dev_bitmap));
3390
3391         rc = hw_init_v2_hw(hisi_hba);
3392         if (rc)
3393                 return rc;
3394
3395         rc = interrupt_init_v2_hw(hisi_hba);
3396         if (rc)
3397                 return rc;
3398
3399         return 0;
3400 }
3401
3402 static void interrupt_disable_v2_hw(struct hisi_hba *hisi_hba)
3403 {
3404         struct platform_device *pdev = hisi_hba->platform_dev;
3405         int i;
3406
3407         for (i = 0; i < hisi_hba->queue_count; i++)
3408                 hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
3409
3410         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
3411         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
3412         hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
3413         hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xffffffff);
3414
3415         for (i = 0; i < hisi_hba->n_phy; i++) {
3416                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
3417                 hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffffff);
3418         }
3419
3420         for (i = 0; i < 128; i++)
3421                 synchronize_irq(platform_get_irq(pdev, i));
3422 }
3423
3424
3425 static u32 get_phys_state_v2_hw(struct hisi_hba *hisi_hba)
3426 {
3427         return hisi_sas_read32(hisi_hba, PHY_STATE);
3428 }
3429
3430 static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
3431 {
3432         struct device *dev = hisi_hba->dev;
3433         int rc, cnt;
3434
3435         interrupt_disable_v2_hw(hisi_hba);
3436         hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
3437
3438         hisi_sas_stop_phys(hisi_hba);
3439
3440         mdelay(10);
3441
3442         hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
3443
3444         /* wait until bus idle */
3445         cnt = 0;
3446         while (1) {
3447                 u32 status = hisi_sas_read32_relaxed(hisi_hba,
3448                                 AXI_MASTER_CFG_BASE + AM_CURR_TRANS_RETURN);
3449
3450                 if (status == 0x3)
3451                         break;
3452
3453                 udelay(10);
3454                 if (cnt++ > 10) {
3455                         dev_err(dev, "wait axi bus state to idle timeout!\n");
3456                         return -1;
3457                 }
3458         }
3459
3460         hisi_sas_init_mem(hisi_hba);
3461
3462         rc = hw_init_v2_hw(hisi_hba);
3463         if (rc)
3464                 return rc;
3465
3466         phys_reject_stp_links_v2_hw(hisi_hba);
3467
3468         return 0;
3469 }
3470
3471 static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
3472                         u8 reg_index, u8 reg_count, u8 *write_data)
3473 {
3474         struct device *dev = hisi_hba->dev;
3475         int phy_no, count;
3476
3477         if (!hisi_hba->sgpio_regs)
3478                 return -EOPNOTSUPP;
3479
3480         switch (reg_type) {
3481         case SAS_GPIO_REG_TX:
3482                 count = reg_count * 4;
3483                 count = min(count, hisi_hba->n_phy);
3484
3485                 for (phy_no = 0; phy_no < count; phy_no++) {
3486                         /*
3487                          * GPIO_TX[n] register has the highest numbered drive
3488                          * of the four in the first byte and the lowest
3489                          * numbered drive in the fourth byte.
3490                          * See SFF-8485 Rev. 0.7 Table 24.
3491                          */
3492                         void __iomem  *reg_addr = hisi_hba->sgpio_regs +
3493                                         reg_index * 4 + phy_no;
3494                         int data_idx = phy_no + 3 - (phy_no % 4) * 2;
3495
3496                         writeb(write_data[data_idx], reg_addr);
3497                 }
3498
3499                 break;
3500         default:
3501                 dev_err(dev, "write gpio: unsupported or bad reg type %d\n",
3502                         reg_type);
3503                 return -EINVAL;
3504         }
3505
3506         return 0;
3507 }
3508
3509 static void wait_cmds_complete_timeout_v2_hw(struct hisi_hba *hisi_hba,
3510                                              int delay_ms, int timeout_ms)
3511 {
3512         struct device *dev = hisi_hba->dev;
3513         int entries, entries_old = 0, time;
3514
3515         for (time = 0; time < timeout_ms; time += delay_ms) {
3516                 entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
3517                 if (entries == entries_old)
3518                         break;
3519
3520                 entries_old = entries;
3521                 msleep(delay_ms);
3522         }
3523
3524         if (time >= timeout_ms) {
3525                 dev_dbg(dev, "Wait commands complete timeout!\n");
3526                 return;
3527         }
3528
3529         dev_dbg(dev, "wait commands complete %dms\n", time);
3530
3531 }
3532
3533 static struct attribute *host_v2_hw_attrs[] = {
3534         &dev_attr_phy_event_threshold.attr,
3535         NULL
3536 };
3537
3538 ATTRIBUTE_GROUPS(host_v2_hw);
3539
3540 static void map_queues_v2_hw(struct Scsi_Host *shost)
3541 {
3542         struct hisi_hba *hisi_hba = shost_priv(shost);
3543         struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
3544         const struct cpumask *mask;
3545         unsigned int queue, cpu;
3546
3547         for (queue = 0; queue < qmap->nr_queues; queue++) {
3548                 mask = irq_get_affinity_mask(hisi_hba->irq_map[96 + queue]);
3549                 if (!mask)
3550                         continue;
3551
3552                 for_each_cpu(cpu, mask)
3553                         qmap->mq_map[cpu] = qmap->queue_offset + queue;
3554         }
3555 }
3556
3557 static const struct scsi_host_template sht_v2_hw = {
3558         .name                   = DRV_NAME,
3559         .proc_name              = DRV_NAME,
3560         .module                 = THIS_MODULE,
3561         .queuecommand           = sas_queuecommand,
3562         .dma_need_drain         = ata_scsi_dma_need_drain,
3563         .target_alloc           = sas_target_alloc,
3564         .slave_configure        = hisi_sas_slave_configure,
3565         .scan_finished          = hisi_sas_scan_finished,
3566         .scan_start             = hisi_sas_scan_start,
3567         .change_queue_depth     = sas_change_queue_depth,
3568         .bios_param             = sas_bios_param,
3569         .this_id                = -1,
3570         .sg_tablesize           = HISI_SAS_SGE_PAGE_CNT,
3571         .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
3572         .eh_device_reset_handler = sas_eh_device_reset_handler,
3573         .eh_target_reset_handler = sas_eh_target_reset_handler,
3574         .slave_alloc            = hisi_sas_slave_alloc,
3575         .target_destroy         = sas_target_destroy,
3576         .ioctl                  = sas_ioctl,
3577 #ifdef CONFIG_COMPAT
3578         .compat_ioctl           = sas_ioctl,
3579 #endif
3580         .shost_groups           = host_v2_hw_groups,
3581         .host_reset             = hisi_sas_host_reset,
3582         .map_queues             = map_queues_v2_hw,
3583         .host_tagset            = 1,
3584 };
3585
3586 static const struct hisi_sas_hw hisi_sas_v2_hw = {
3587         .hw_init = hisi_sas_v2_init,
3588         .interrupt_preinit = hisi_sas_v2_interrupt_preinit,
3589         .setup_itct = setup_itct_v2_hw,
3590         .slot_index_alloc = slot_index_alloc_quirk_v2_hw,
3591         .alloc_dev = alloc_dev_quirk_v2_hw,
3592         .sl_notify_ssp = sl_notify_ssp_v2_hw,
3593         .get_wideport_bitmap = get_wideport_bitmap_v2_hw,
3594         .clear_itct = clear_itct_v2_hw,
3595         .free_device = free_device_v2_hw,
3596         .prep_smp = prep_smp_v2_hw,
3597         .prep_ssp = prep_ssp_v2_hw,
3598         .prep_stp = prep_ata_v2_hw,
3599         .prep_abort = prep_abort_v2_hw,
3600         .start_delivery = start_delivery_v2_hw,
3601         .phys_init = phys_init_v2_hw,
3602         .phy_start = start_phy_v2_hw,
3603         .phy_disable = disable_phy_v2_hw,
3604         .phy_hard_reset = phy_hard_reset_v2_hw,
3605         .get_events = phy_get_events_v2_hw,
3606         .phy_set_linkrate = phy_set_linkrate_v2_hw,
3607         .phy_get_max_linkrate = phy_get_max_linkrate_v2_hw,
3608         .complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
3609         .soft_reset = soft_reset_v2_hw,
3610         .get_phys_state = get_phys_state_v2_hw,
3611         .write_gpio = write_gpio_v2_hw,
3612         .wait_cmds_complete_timeout = wait_cmds_complete_timeout_v2_hw,
3613         .sht = &sht_v2_hw,
3614 };
3615
3616 static int hisi_sas_v2_probe(struct platform_device *pdev)
3617 {
3618         return hisi_sas_probe(pdev, &hisi_sas_v2_hw);
3619 }
3620
3621 static const struct of_device_id sas_v2_of_match[] = {
3622         { .compatible = "hisilicon,hip06-sas-v2",},
3623         { .compatible = "hisilicon,hip07-sas-v2",},
3624         {},
3625 };
3626 MODULE_DEVICE_TABLE(of, sas_v2_of_match);
3627
3628 static const struct acpi_device_id sas_v2_acpi_match[] = {
3629         { "HISI0162", 0 },
3630         { }
3631 };
3632
3633 MODULE_DEVICE_TABLE(acpi, sas_v2_acpi_match);
3634
3635 static struct platform_driver hisi_sas_v2_driver = {
3636         .probe = hisi_sas_v2_probe,
3637         .remove_new = hisi_sas_remove,
3638         .driver = {
3639                 .name = DRV_NAME,
3640                 .of_match_table = sas_v2_of_match,
3641                 .acpi_match_table = ACPI_PTR(sas_v2_acpi_match),
3642         },
3643 };
3644
3645 module_platform_driver(hisi_sas_v2_driver);
3646
3647 MODULE_LICENSE("GPL");
3648 MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
3649 MODULE_DESCRIPTION("HISILICON SAS controller v2 hw driver");
3650 MODULE_ALIAS("platform:" DRV_NAME);