Merge tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git...

[linux-2.6-microblaze.git] / drivers / scsi / aic7xxx / aic79xx_core.c

/*
 * Core routines and tables shareable across OS platforms.
 *
 * Copyright (c) 1994-2002 Justin T. Gibbs.
 * Copyright (c) 2000-2003 Adaptec Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
 */

#include "aic79xx_osm.h"
#include "aic79xx_inline.h"
#include "aicasm/aicasm_insformat.h"

/***************************** Lookup Tables **********************************/
static const char *const ahd_chip_names[] =
{
        "NONE",
        "aic7901",
        "aic7902",
        "aic7901A"
};

/*
 * Hardware error codes.
 */
struct ahd_hard_error_entry {
        uint8_t errno;
        const char *errmesg;
};

static const struct ahd_hard_error_entry ahd_hard_errors[] = {
        { DSCTMOUT,     "Discard Timer has timed out" },
        { ILLOPCODE,    "Illegal Opcode in sequencer program" },
        { SQPARERR,     "Sequencer Parity Error" },
        { DPARERR,      "Data-path Parity Error" },
        { MPARERR,      "Scratch or SCB Memory Parity Error" },
        { CIOPARERR,    "CIOBUS Parity Error" },
};
static const u_int num_errors = ARRAY_SIZE(ahd_hard_errors);

static const struct ahd_phase_table_entry ahd_phase_table[] =
{
        { P_DATAOUT,    NOP,                    "in Data-out phase"     },
        { P_DATAIN,     INITIATOR_ERROR,        "in Data-in phase"      },
        { P_DATAOUT_DT, NOP,                    "in DT Data-out phase"  },
        { P_DATAIN_DT,  INITIATOR_ERROR,        "in DT Data-in phase"   },
        { P_COMMAND,    NOP,                    "in Command phase"      },
        { P_MESGOUT,    NOP,                    "in Message-out phase"  },
        { P_STATUS,     INITIATOR_ERROR,        "in Status phase"       },
        { P_MESGIN,     MSG_PARITY_ERROR,       "in Message-in phase"   },
        { P_BUSFREE,    NOP,                    "while idle"            },
        { 0,            NOP,                    "in unknown phase"      }
};

/*
 * In most cases we only wish to itterate over real phases, so
 * exclude the last element from the count.
 */
static const u_int num_phases = ARRAY_SIZE(ahd_phase_table) - 1;

/* Our Sequencer Program */
#include "aic79xx_seq.h"

/**************************** Function Declarations ***************************/
static void             ahd_handle_transmission_error(struct ahd_softc *ahd);
static void             ahd_handle_lqiphase_error(struct ahd_softc *ahd,
                                                  u_int lqistat1);
static int              ahd_handle_pkt_busfree(struct ahd_softc *ahd,
                                               u_int busfreetime);
static int              ahd_handle_nonpkt_busfree(struct ahd_softc *ahd);
static void             ahd_handle_proto_violation(struct ahd_softc *ahd);
static void             ahd_force_renegotiation(struct ahd_softc *ahd,
                                                struct ahd_devinfo *devinfo);

static struct ahd_tmode_tstate*
                        ahd_alloc_tstate(struct ahd_softc *ahd,
                                         u_int scsi_id, char channel);
#ifdef AHD_TARGET_MODE
static void             ahd_free_tstate(struct ahd_softc *ahd,
                                        u_int scsi_id, char channel, int force);
#endif
static void             ahd_devlimited_syncrate(struct ahd_softc *ahd,
                                                struct ahd_initiator_tinfo *,
                                                u_int *period,
                                                u_int *ppr_options,
                                                role_t role);
static void             ahd_update_neg_table(struct ahd_softc *ahd,
                                             struct ahd_devinfo *devinfo,
                                             struct ahd_transinfo *tinfo);
static void             ahd_update_pending_scbs(struct ahd_softc *ahd);
static void             ahd_fetch_devinfo(struct ahd_softc *ahd,
                                          struct ahd_devinfo *devinfo);
static void             ahd_scb_devinfo(struct ahd_softc *ahd,
                                        struct ahd_devinfo *devinfo,
                                        struct scb *scb);
static void             ahd_setup_initiator_msgout(struct ahd_softc *ahd,
                                                   struct ahd_devinfo *devinfo,
                                                   struct scb *scb);
static void             ahd_build_transfer_msg(struct ahd_softc *ahd,
                                               struct ahd_devinfo *devinfo);
static void             ahd_construct_sdtr(struct ahd_softc *ahd,
                                           struct ahd_devinfo *devinfo,
                                           u_int period, u_int offset);
static void             ahd_construct_wdtr(struct ahd_softc *ahd,
                                           struct ahd_devinfo *devinfo,
                                           u_int bus_width);
static void             ahd_construct_ppr(struct ahd_softc *ahd,
                                          struct ahd_devinfo *devinfo,
                                          u_int period, u_int offset,
                                          u_int bus_width, u_int ppr_options);
static void             ahd_clear_msg_state(struct ahd_softc *ahd);
static void             ahd_handle_message_phase(struct ahd_softc *ahd);
typedef enum {
        AHDMSG_1B,
        AHDMSG_2B,
        AHDMSG_EXT
} ahd_msgtype;
static int              ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type,
                                     u_int msgval, int full);
static int              ahd_parse_msg(struct ahd_softc *ahd,
                                      struct ahd_devinfo *devinfo);
static int              ahd_handle_msg_reject(struct ahd_softc *ahd,
                                              struct ahd_devinfo *devinfo);
static void             ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
                                                struct ahd_devinfo *devinfo);
static void             ahd_reinitialize_dataptrs(struct ahd_softc *ahd);
static void             ahd_handle_devreset(struct ahd_softc *ahd,
                                            struct ahd_devinfo *devinfo,
                                            u_int lun, cam_status status,
                                            char *message, int verbose_level);
#ifdef AHD_TARGET_MODE
static void             ahd_setup_target_msgin(struct ahd_softc *ahd,
                                               struct ahd_devinfo *devinfo,
                                               struct scb *scb);
#endif

static u_int            ahd_sglist_size(struct ahd_softc *ahd);
static u_int            ahd_sglist_allocsize(struct ahd_softc *ahd);
static bus_dmamap_callback_t
                        ahd_dmamap_cb;
static void             ahd_initialize_hscbs(struct ahd_softc *ahd);
static int              ahd_init_scbdata(struct ahd_softc *ahd);
static void             ahd_fini_scbdata(struct ahd_softc *ahd);
static void             ahd_setup_iocell_workaround(struct ahd_softc *ahd);
static void             ahd_iocell_first_selection(struct ahd_softc *ahd);
static void             ahd_add_col_list(struct ahd_softc *ahd,
                                         struct scb *scb, u_int col_idx);
static void             ahd_rem_col_list(struct ahd_softc *ahd,
                                         struct scb *scb);
static void             ahd_chip_init(struct ahd_softc *ahd);
static void             ahd_qinfifo_requeue(struct ahd_softc *ahd,
                                            struct scb *prev_scb,
                                            struct scb *scb);
static int              ahd_qinfifo_count(struct ahd_softc *ahd);
static int              ahd_search_scb_list(struct ahd_softc *ahd, int target,
                                            char channel, int lun, u_int tag,
                                            role_t role, uint32_t status,
                                            ahd_search_action action,
                                            u_int *list_head, u_int *list_tail,
                                            u_int tid);
static void             ahd_stitch_tid_list(struct ahd_softc *ahd,
                                            u_int tid_prev, u_int tid_cur,
                                            u_int tid_next);
static void             ahd_add_scb_to_free_list(struct ahd_softc *ahd,
                                                 u_int scbid);
static u_int            ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
                                     u_int prev, u_int next, u_int tid);
static void             ahd_reset_current_bus(struct ahd_softc *ahd);
static void             ahd_stat_timer(struct timer_list *t);
#ifdef AHD_DUMP_SEQ
static void             ahd_dumpseq(struct ahd_softc *ahd);
#endif
static void             ahd_loadseq(struct ahd_softc *ahd);
static int              ahd_check_patch(struct ahd_softc *ahd,
                                        const struct patch **start_patch,
                                        u_int start_instr, u_int *skip_addr);
static u_int            ahd_resolve_seqaddr(struct ahd_softc *ahd,
                                            u_int address);
static void             ahd_download_instr(struct ahd_softc *ahd,
                                           u_int instrptr, uint8_t *dconsts);
static int              ahd_probe_stack_size(struct ahd_softc *ahd);
static int              ahd_scb_active_in_fifo(struct ahd_softc *ahd,
                                               struct scb *scb);
static void             ahd_run_data_fifo(struct ahd_softc *ahd,
                                          struct scb *scb);

#ifdef AHD_TARGET_MODE
static void             ahd_queue_lstate_event(struct ahd_softc *ahd,
                                               struct ahd_tmode_lstate *lstate,
                                               u_int initiator_id,
                                               u_int event_type,
                                               u_int event_arg);
static void             ahd_update_scsiid(struct ahd_softc *ahd,
                                          u_int targid_mask);
static int              ahd_handle_target_cmd(struct ahd_softc *ahd,
                                              struct target_cmd *cmd);
#endif

static int              ahd_abort_scbs(struct ahd_softc *ahd, int target,
                                       char channel, int lun, u_int tag,
                                       role_t role, uint32_t status);
static void             ahd_alloc_scbs(struct ahd_softc *ahd);
static void             ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl,
                                     u_int scbid);
static void             ahd_calc_residual(struct ahd_softc *ahd,
                                          struct scb *scb);
static void             ahd_clear_critical_section(struct ahd_softc *ahd);
static void             ahd_clear_intstat(struct ahd_softc *ahd);
static void             ahd_enable_coalescing(struct ahd_softc *ahd,
                                              int enable);
static u_int            ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl);
static void             ahd_freeze_devq(struct ahd_softc *ahd,
                                        struct scb *scb);
static void             ahd_handle_scb_status(struct ahd_softc *ahd,
                                              struct scb *scb);
static const struct ahd_phase_table_entry* ahd_lookup_phase_entry(int phase);
static void             ahd_shutdown(void *arg);
static void             ahd_update_coalescing_values(struct ahd_softc *ahd,
                                                     u_int timer,
                                                     u_int maxcmds,
                                                     u_int mincmds);
static int              ahd_verify_vpd_cksum(struct vpd_config *vpd);
static int              ahd_wait_seeprom(struct ahd_softc *ahd);
static int              ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
                                      int target, char channel, int lun,
                                      u_int tag, role_t role);

static void             ahd_reset_cmds_pending(struct ahd_softc *ahd);

/*************************** Interrupt Services *******************************/
static void             ahd_run_qoutfifo(struct ahd_softc *ahd);
#ifdef AHD_TARGET_MODE
static void             ahd_run_tqinfifo(struct ahd_softc *ahd, int paused);
#endif
static void             ahd_handle_hwerrint(struct ahd_softc *ahd);
static void             ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat);
static void             ahd_handle_scsiint(struct ahd_softc *ahd,
                                           u_int intstat);

/************************ Sequencer Execution Control *************************/
void
ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
{
        if (ahd->src_mode == src && ahd->dst_mode == dst)
                return;
#ifdef AHD_DEBUG
        if (ahd->src_mode == AHD_MODE_UNKNOWN
         || ahd->dst_mode == AHD_MODE_UNKNOWN)
                panic("Setting mode prior to saving it.\n");
        if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
                printk("%s: Setting mode 0x%x\n", ahd_name(ahd),
                       ahd_build_mode_state(ahd, src, dst));
#endif
        ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
        ahd->src_mode = src;
        ahd->dst_mode = dst;
}

static void
ahd_update_modes(struct ahd_softc *ahd)
{
        ahd_mode_state mode_ptr;
        ahd_mode src;
        ahd_mode dst;

        mode_ptr = ahd_inb(ahd, MODE_PTR);
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
                printk("Reading mode 0x%x\n", mode_ptr);
#endif
        ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
        ahd_known_modes(ahd, src, dst);
}

static void
ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
                 ahd_mode dstmode, const char *file, int line)
{
#ifdef AHD_DEBUG
        if ((srcmode & AHD_MK_MSK(ahd->src_mode)) == 0
         || (dstmode & AHD_MK_MSK(ahd->dst_mode)) == 0) {
                panic("%s:%s:%d: Mode assertion failed.\n",
                       ahd_name(ahd), file, line);
        }
#endif
}

#define AHD_ASSERT_MODES(ahd, source, dest) \
        ahd_assert_modes(ahd, source, dest, __FILE__, __LINE__);

ahd_mode_state
ahd_save_modes(struct ahd_softc *ahd)
{
        if (ahd->src_mode == AHD_MODE_UNKNOWN
         || ahd->dst_mode == AHD_MODE_UNKNOWN)
                ahd_update_modes(ahd);

        return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
}

void
ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
{
        ahd_mode src;
        ahd_mode dst;

        ahd_extract_mode_state(ahd, state, &src, &dst);
        ahd_set_modes(ahd, src, dst);
}

/*
 * Determine whether the sequencer has halted code execution.
 * Returns non-zero status if the sequencer is stopped.
 */
int
ahd_is_paused(struct ahd_softc *ahd)
{
        return ((ahd_inb(ahd, HCNTRL) & PAUSE) != 0);
}

/*
 * Request that the sequencer stop and wait, indefinitely, for it
 * to stop.  The sequencer will only acknowledge that it is paused
 * once it has reached an instruction boundary and PAUSEDIS is
 * cleared in the SEQCTL register.  The sequencer may use PAUSEDIS
 * for critical sections.
 */
void
ahd_pause(struct ahd_softc *ahd)
{
        ahd_outb(ahd, HCNTRL, ahd->pause);

        /*
         * Since the sequencer can disable pausing in a critical section, we
         * must loop until it actually stops.
         */
        while (ahd_is_paused(ahd) == 0)
                ;
}

/*
 * Allow the sequencer to continue program execution.
 * We check here to ensure that no additional interrupt
 * sources that would cause the sequencer to halt have been
 * asserted.  If, for example, a SCSI bus reset is detected
 * while we are fielding a different, pausing, interrupt type,
 * we don't want to release the sequencer before going back
 * into our interrupt handler and dealing with this new
 * condition.
 */
void
ahd_unpause(struct ahd_softc *ahd)
{
        /*
         * Automatically restore our modes to those saved
         * prior to the first change of the mode.
         */
        if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
         && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
                if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
                        ahd_reset_cmds_pending(ahd);
                ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
        }

        if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
                ahd_outb(ahd, HCNTRL, ahd->unpause);

        ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
}

/*********************** Scatter Gather List Handling *************************/
void *
ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
             void *sgptr, dma_addr_t addr, bus_size_t len, int last)
{
        scb->sg_count++;
        if (sizeof(dma_addr_t) > 4
         && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
                struct ahd_dma64_seg *sg;

                sg = (struct ahd_dma64_seg *)sgptr;
                sg->addr = ahd_htole64(addr);
                sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
                return (sg + 1);
        } else {
                struct ahd_dma_seg *sg;

                sg = (struct ahd_dma_seg *)sgptr;
                sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
                sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
                                    | (last ? AHD_DMA_LAST_SEG : 0));
                return (sg + 1);
        }
}

static void
ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
{
        /* XXX Handle target mode SCBs. */
        scb->crc_retry_count = 0;
        if ((scb->flags & SCB_PACKETIZED) != 0) {
                /* XXX what about ACA??  It is type 4, but TAG_TYPE == 0x3. */
                scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
        } else {
                if (ahd_get_transfer_length(scb) & 0x01)
                        scb->hscb->task_attribute = SCB_XFERLEN_ODD;
                else
                        scb->hscb->task_attribute = 0;
        }

        if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
         || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
                scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
                    ahd_htole32(scb->sense_busaddr);
}

static void
ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
{
        /*
         * Copy the first SG into the "current" data ponter area.
         */
        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
                struct ahd_dma64_seg *sg;

                sg = (struct ahd_dma64_seg *)scb->sg_list;
                scb->hscb->dataptr = sg->addr;
                scb->hscb->datacnt = sg->len;
        } else {
                struct ahd_dma_seg *sg;
                uint32_t *dataptr_words;

                sg = (struct ahd_dma_seg *)scb->sg_list;
                dataptr_words = (uint32_t*)&scb->hscb->dataptr;
                dataptr_words[0] = sg->addr;
                dataptr_words[1] = 0;
                if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
                        uint64_t high_addr;

                        high_addr = ahd_le32toh(sg->len) & 0x7F000000;
                        scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
                }
                scb->hscb->datacnt = sg->len;
        }
        /*
         * Note where to find the SG entries in bus space.
         * We also set the full residual flag which the
         * sequencer will clear as soon as a data transfer
         * occurs.
         */
        scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
}

static void
ahd_setup_noxfer_scb(struct ahd_softc *ahd, struct scb *scb)
{
        scb->hscb->sgptr = ahd_htole32(SG_LIST_NULL);
        scb->hscb->dataptr = 0;
        scb->hscb->datacnt = 0;
}

/************************** Memory mapping routines ***************************/
static void *
ahd_sg_bus_to_virt(struct ahd_softc *ahd, struct scb *scb, uint32_t sg_busaddr)
{
        dma_addr_t sg_offset;

        /* sg_list_phys points to entry 1, not 0 */
        sg_offset = sg_busaddr - (scb->sg_list_busaddr - ahd_sg_size(ahd));
        return ((uint8_t *)scb->sg_list + sg_offset);
}

static uint32_t
ahd_sg_virt_to_bus(struct ahd_softc *ahd, struct scb *scb, void *sg)
{
        dma_addr_t sg_offset;

        /* sg_list_phys points to entry 1, not 0 */
        sg_offset = ((uint8_t *)sg - (uint8_t *)scb->sg_list)
                  - ahd_sg_size(ahd);

        return (scb->sg_list_busaddr + sg_offset);
}

static void
ahd_sync_scb(struct ahd_softc *ahd, struct scb *scb, int op)
{
        ahd_dmamap_sync(ahd, ahd->scb_data.hscb_dmat,
                        scb->hscb_map->dmamap,
                        /*offset*/(uint8_t*)scb->hscb - scb->hscb_map->vaddr,
                        /*len*/sizeof(*scb->hscb), op);
}

void
ahd_sync_sglist(struct ahd_softc *ahd, struct scb *scb, int op)
{
        if (scb->sg_count == 0)
                return;

        ahd_dmamap_sync(ahd, ahd->scb_data.sg_dmat,
                        scb->sg_map->dmamap,
                        /*offset*/scb->sg_list_busaddr - ahd_sg_size(ahd),
                        /*len*/ahd_sg_size(ahd) * scb->sg_count, op);
}

static void
ahd_sync_sense(struct ahd_softc *ahd, struct scb *scb, int op)
{
        ahd_dmamap_sync(ahd, ahd->scb_data.sense_dmat,
                        scb->sense_map->dmamap,
                        /*offset*/scb->sense_busaddr,
                        /*len*/AHD_SENSE_BUFSIZE, op);
}

#ifdef AHD_TARGET_MODE
static uint32_t
ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
{
        return (((uint8_t *)&ahd->targetcmds[index])
               - (uint8_t *)ahd->qoutfifo);
}
#endif

/*********************** Miscellaneous Support Functions ***********************/
/*
 * Return pointers to the transfer negotiation information
 * for the specified our_id/remote_id pair.
 */
struct ahd_initiator_tinfo *
ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id,
                    u_int remote_id, struct ahd_tmode_tstate **tstate)
{
        /*
         * Transfer data structures are stored from the perspective
         * of the target role.  Since the parameters for a connection
         * in the initiator role to a given target are the same as
         * when the roles are reversed, we pretend we are the target.
         */
        if (channel == 'B')
                our_id += 8;
        *tstate = ahd->enabled_targets[our_id];
        return (&(*tstate)->transinfo[remote_id]);
}

uint16_t
ahd_inw(struct ahd_softc *ahd, u_int port)
{
        /*
         * Read high byte first as some registers increment
         * or have other side effects when the low byte is
         * read.
         */
        uint16_t r = ahd_inb(ahd, port+1) << 8;
        return r | ahd_inb(ahd, port);
}

void
ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
{
        /*
         * Write low byte first to accommodate registers
         * such as PRGMCNT where the order maters.
         */
        ahd_outb(ahd, port, value & 0xFF);
        ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
}

uint32_t
ahd_inl(struct ahd_softc *ahd, u_int port)
{
        return ((ahd_inb(ahd, port))
              | (ahd_inb(ahd, port+1) << 8)
              | (ahd_inb(ahd, port+2) << 16)
              | (ahd_inb(ahd, port+3) << 24));
}

void
ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
{
        ahd_outb(ahd, port, (value) & 0xFF);
        ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
        ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
        ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
}

uint64_t
ahd_inq(struct ahd_softc *ahd, u_int port)
{
        return ((ahd_inb(ahd, port))
              | (ahd_inb(ahd, port+1) << 8)
              | (ahd_inb(ahd, port+2) << 16)
              | (ahd_inb(ahd, port+3) << 24)
              | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
              | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
              | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
              | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
}

void
ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
{
        ahd_outb(ahd, port, value & 0xFF);
        ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
        ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
        ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
        ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
        ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
        ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
        ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
}

u_int
ahd_get_scbptr(struct ahd_softc *ahd)
{
        AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                         ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
        return (ahd_inb(ahd, SCBPTR) | (ahd_inb(ahd, SCBPTR + 1) << 8));
}

void
ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr)
{
        AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                         ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
        ahd_outb(ahd, SCBPTR, scbptr & 0xFF);
        ahd_outb(ahd, SCBPTR+1, (scbptr >> 8) & 0xFF);
}

#if 0 /* unused */
static u_int
ahd_get_hnscb_qoff(struct ahd_softc *ahd)
{
        return (ahd_inw_atomic(ahd, HNSCB_QOFF));
}
#endif

static void
ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value)
{
        ahd_outw_atomic(ahd, HNSCB_QOFF, value);
}

#if 0 /* unused */
static u_int
ahd_get_hescb_qoff(struct ahd_softc *ahd)
{
        return (ahd_inb(ahd, HESCB_QOFF));
}
#endif

static void
ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value)
{
        ahd_outb(ahd, HESCB_QOFF, value);
}

static u_int
ahd_get_snscb_qoff(struct ahd_softc *ahd)
{
        u_int oldvalue;

        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        oldvalue = ahd_inw(ahd, SNSCB_QOFF);
        ahd_outw(ahd, SNSCB_QOFF, oldvalue);
        return (oldvalue);
}

static void
ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        ahd_outw(ahd, SNSCB_QOFF, value);
}

#if 0 /* unused */
static u_int
ahd_get_sescb_qoff(struct ahd_softc *ahd)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        return (ahd_inb(ahd, SESCB_QOFF));
}
#endif

static void
ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        ahd_outb(ahd, SESCB_QOFF, value);
}

#if 0 /* unused */
static u_int
ahd_get_sdscb_qoff(struct ahd_softc *ahd)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        return (ahd_inb(ahd, SDSCB_QOFF) | (ahd_inb(ahd, SDSCB_QOFF + 1) << 8));
}
#endif

static void
ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        ahd_outb(ahd, SDSCB_QOFF, value & 0xFF);
        ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
}

u_int
ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
{
        u_int value;

        /*
         * Workaround PCI-X Rev A. hardware bug.
         * After a host read of SCB memory, the chip
         * may become confused into thinking prefetch
         * was required.  This starts the discard timer
         * running and can cause an unexpected discard
         * timer interrupt.  The work around is to read
         * a normal register prior to the exhaustion of
         * the discard timer.  The mode pointer register
         * has no side effects and so serves well for
         * this purpose.
         *
         * Razor #528
         */
        value = ahd_inb(ahd, offset);
        if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
                ahd_inb(ahd, MODE_PTR);
        return (value);
}

u_int
ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
{
        return (ahd_inb_scbram(ahd, offset)
              | (ahd_inb_scbram(ahd, offset+1) << 8));
}

static uint32_t
ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
{
        return (ahd_inw_scbram(ahd, offset)
              | (ahd_inw_scbram(ahd, offset+2) << 16));
}

static uint64_t
ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
{
        return (ahd_inl_scbram(ahd, offset)
              | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
}

struct scb *
ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
{
        struct scb* scb;

        if (tag >= AHD_SCB_MAX)
                return (NULL);
        scb = ahd->scb_data.scbindex[tag];
        if (scb != NULL)
                ahd_sync_scb(ahd, scb,
                             BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
        return (scb);
}

static void
ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
{
        struct   hardware_scb *q_hscb;
        struct   map_node *q_hscb_map;
        uint32_t saved_hscb_busaddr;

        /*
         * Our queuing method is a bit tricky.  The card
         * knows in advance which HSCB (by address) to download,
         * and we can't disappoint it.  To achieve this, the next
         * HSCB to download is saved off in ahd->next_queued_hscb.
         * When we are called to queue "an arbitrary scb",
         * we copy the contents of the incoming HSCB to the one
         * the sequencer knows about, swap HSCB pointers and
         * finally assign the SCB to the tag indexed location
         * in the scb_array.  This makes sure that we can still
         * locate the correct SCB by SCB_TAG.
         */
        q_hscb = ahd->next_queued_hscb;
        q_hscb_map = ahd->next_queued_hscb_map;
        saved_hscb_busaddr = q_hscb->hscb_busaddr;
        memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
        q_hscb->hscb_busaddr = saved_hscb_busaddr;
        q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;

        /* Now swap HSCB pointers. */
        ahd->next_queued_hscb = scb->hscb;
        ahd->next_queued_hscb_map = scb->hscb_map;
        scb->hscb = q_hscb;
        scb->hscb_map = q_hscb_map;

        /* Now define the mapping from tag to SCB in the scbindex */
        ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
}

/*
 * Tell the sequencer about a new transaction to execute.
 */
void
ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
{
        ahd_swap_with_next_hscb(ahd, scb);

        if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
                panic("Attempt to queue invalid SCB tag %x\n",
                      SCB_GET_TAG(scb));

        /*
         * Keep a history of SCBs we've downloaded in the qinfifo.
         */
        ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
        ahd->qinfifonext++;

        if (scb->sg_count != 0)
                ahd_setup_data_scb(ahd, scb);
        else
                ahd_setup_noxfer_scb(ahd, scb);
        ahd_setup_scb_common(ahd, scb);

        /*
         * Make sure our data is consistent from the
         * perspective of the adapter.
         */
        ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
                uint64_t host_dataptr;

                host_dataptr = ahd_le64toh(scb->hscb->dataptr);
                printk("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
                       ahd_name(ahd),
                       SCB_GET_TAG(scb), scb->hscb->scsiid,
                       ahd_le32toh(scb->hscb->hscb_busaddr),
                       (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
                       (u_int)(host_dataptr & 0xFFFFFFFF),
                       ahd_le32toh(scb->hscb->datacnt));
        }
#endif
        /* Tell the adapter about the newly queued SCB */
        ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
}

/************************** Interrupt Processing ******************************/
static void
ahd_sync_qoutfifo(struct ahd_softc *ahd, int op)
{
        ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
                        /*offset*/0,
                        /*len*/AHD_SCB_MAX * sizeof(struct ahd_completion), op);
}

static void
ahd_sync_tqinfifo(struct ahd_softc *ahd, int op)
{
#ifdef AHD_TARGET_MODE
        if ((ahd->flags & AHD_TARGETROLE) != 0) {
                ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
                                ahd->shared_data_map.dmamap,
                                ahd_targetcmd_offset(ahd, 0),
                                sizeof(struct target_cmd) * AHD_TMODE_CMDS,
                                op);
        }
#endif
}

/*
 * See if the firmware has posted any completed commands
 * into our in-core command complete fifos.
 */
#define AHD_RUN_QOUTFIFO 0x1
#define AHD_RUN_TQINFIFO 0x2
static u_int
ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
{
        u_int retval;

        retval = 0;
        ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
                        /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
                        /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
        if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
          == ahd->qoutfifonext_valid_tag)
                retval |= AHD_RUN_QOUTFIFO;
#ifdef AHD_TARGET_MODE
        if ((ahd->flags & AHD_TARGETROLE) != 0
         && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
                ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
                                ahd->shared_data_map.dmamap,
                                ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
                                /*len*/sizeof(struct target_cmd),
                                BUS_DMASYNC_POSTREAD);
                if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
                        retval |= AHD_RUN_TQINFIFO;
        }
#endif
        return (retval);
}

/*
 * Catch an interrupt from the adapter
 */
int
ahd_intr(struct ahd_softc *ahd)
{
        u_int   intstat;

        if ((ahd->pause & INTEN) == 0) {
                /*
                 * Our interrupt is not enabled on the chip
                 * and may be disabled for re-entrancy reasons,
                 * so just return.  This is likely just a shared
                 * interrupt.
                 */
                return (0);
        }

        /*
         * Instead of directly reading the interrupt status register,
         * infer the cause of the interrupt by checking our in-core
         * completion queues.  This avoids a costly PCI bus read in
         * most cases.
         */
        if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
         && (ahd_check_cmdcmpltqueues(ahd) != 0))
                intstat = CMDCMPLT;
        else
                intstat = ahd_inb(ahd, INTSTAT);

        if ((intstat & INT_PEND) == 0)
                return (0);

        if (intstat & CMDCMPLT) {
                ahd_outb(ahd, CLRINT, CLRCMDINT);

                /*
                 * Ensure that the chip sees that we've cleared
                 * this interrupt before we walk the output fifo.
                 * Otherwise, we may, due to posted bus writes,
                 * clear the interrupt after we finish the scan,
                 * and after the sequencer has added new entries
                 * and asserted the interrupt again.
                 */
                if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
                        if (ahd_is_paused(ahd)) {
                                /*
                                 * Potentially lost SEQINT.
                                 * If SEQINTCODE is non-zero,
                                 * simulate the SEQINT.
                                 */
                                if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
                                        intstat |= SEQINT;
                        }
                } else {
                        ahd_flush_device_writes(ahd);
                }
                ahd_run_qoutfifo(ahd);
                ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
                ahd->cmdcmplt_total++;
#ifdef AHD_TARGET_MODE
                if ((ahd->flags & AHD_TARGETROLE) != 0)
                        ahd_run_tqinfifo(ahd, /*paused*/FALSE);
#endif
        }

        /*
         * Handle statuses that may invalidate our cached
         * copy of INTSTAT separately.
         */
        if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
                /* Hot eject.  Do nothing */
        } else if (intstat & HWERRINT) {
                ahd_handle_hwerrint(ahd);
        } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
                ahd->bus_intr(ahd);
        } else {

                if ((intstat & SEQINT) != 0)
                        ahd_handle_seqint(ahd, intstat);

                if ((intstat & SCSIINT) != 0)
                        ahd_handle_scsiint(ahd, intstat);
        }
        return (1);
}

/******************************** Private Inlines *****************************/
static inline void
ahd_assert_atn(struct ahd_softc *ahd)
{
        ahd_outb(ahd, SCSISIGO, ATNO);
}

/*
 * Determine if the current connection has a packetized
 * agreement.  This does not necessarily mean that we
 * are currently in a packetized transfer.  We could
 * just as easily be sending or receiving a message.
 */
static int
ahd_currently_packetized(struct ahd_softc *ahd)
{
        ahd_mode_state   saved_modes;
        int              packetized;

        saved_modes = ahd_save_modes(ahd);
        if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) {
                /*
                 * The packetized bit refers to the last
                 * connection, not the current one.  Check
                 * for non-zero LQISTATE instead.
                 */
                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                packetized = ahd_inb(ahd, LQISTATE) != 0;
        } else {
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED;
        }
        ahd_restore_modes(ahd, saved_modes);
        return (packetized);
}

static inline int
ahd_set_active_fifo(struct ahd_softc *ahd)
{
        u_int active_fifo;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
        switch (active_fifo) {
        case 0:
        case 1:
                ahd_set_modes(ahd, active_fifo, active_fifo);
                return (1);
        default:
                return (0);
        }
}

static inline void
ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl)
{
        ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL);
}

/*
 * Determine whether the sequencer reported a residual
 * for this SCB/transaction.
 */
static inline void
ahd_update_residual(struct ahd_softc *ahd, struct scb *scb)
{
        uint32_t sgptr;

        sgptr = ahd_le32toh(scb->hscb->sgptr);
        if ((sgptr & SG_STATUS_VALID) != 0)
                ahd_calc_residual(ahd, scb);
}

static inline void
ahd_complete_scb(struct ahd_softc *ahd, struct scb *scb)
{
        uint32_t sgptr;

        sgptr = ahd_le32toh(scb->hscb->sgptr);
        if ((sgptr & SG_STATUS_VALID) != 0)
                ahd_handle_scb_status(ahd, scb);
        else
                ahd_done(ahd, scb);
}


/************************* Sequencer Execution Control ************************/
/*
 * Restart the sequencer program from address zero
 */
static void
ahd_restart(struct ahd_softc *ahd)
{

        ahd_pause(ahd);

        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        /* No more pending messages */
        ahd_clear_msg_state(ahd);
        ahd_outb(ahd, SCSISIGO, 0);             /* De-assert BSY */
        ahd_outb(ahd, MSG_OUT, NOP);    /* No message to send */
        ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET);
        ahd_outb(ahd, SEQINTCTL, 0);
        ahd_outb(ahd, LASTPHASE, P_BUSFREE);
        ahd_outb(ahd, SEQ_FLAGS, 0);
        ahd_outb(ahd, SAVED_SCSIID, 0xFF);
        ahd_outb(ahd, SAVED_LUN, 0xFF);

        /*
         * Ensure that the sequencer's idea of TQINPOS
         * matches our own.  The sequencer increments TQINPOS
         * only after it sees a DMA complete and a reset could
         * occur before the increment leaving the kernel to believe
         * the command arrived but the sequencer to not.
         */
        ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);

        /* Always allow reselection */
        ahd_outb(ahd, SCSISEQ1,
                 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);

        /*
         * Clear any pending sequencer interrupt.  It is no
         * longer relevant since we're resetting the Program
         * Counter.
         */
        ahd_outb(ahd, CLRINT, CLRSEQINT);

        ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
        ahd_unpause(ahd);
}

static void
ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo)
{
        ahd_mode_state   saved_modes;

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_FIFOS) != 0)
                printk("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
#endif
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, fifo, fifo);
        ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
        if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
                ahd_outb(ahd, CCSGCTL, CCSGRESET);
        ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
        ahd_outb(ahd, SG_STATE, 0);
        ahd_restore_modes(ahd, saved_modes);
}

/************************* Input/Output Queues ********************************/
/*
 * Flush and completed commands that are sitting in the command
 * complete queues down on the chip but have yet to be dma'ed back up.
 */
static void
ahd_flush_qoutfifo(struct ahd_softc *ahd)
{
        struct          scb *scb;
        ahd_mode_state  saved_modes;
        u_int           saved_scbptr;
        u_int           ccscbctl;
        u_int           scbid;
        u_int           next_scbid;

        saved_modes = ahd_save_modes(ahd);

        /*
         * Flush the good status FIFO for completed packetized commands.
         */
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        saved_scbptr = ahd_get_scbptr(ahd);
        while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) {
                u_int fifo_mode;
                u_int i;

                scbid = ahd_inw(ahd, GSFIFO);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: Warning - GSFIFO SCB %d invalid\n",
                               ahd_name(ahd), scbid);
                        continue;
                }
                /*
                 * Determine if this transaction is still active in
                 * any FIFO.  If it is, we must flush that FIFO to
                 * the host before completing the  command.
                 */
                fifo_mode = 0;
rescan_fifos:
                for (i = 0; i < 2; i++) {
                        /* Toggle to the other mode. */
                        fifo_mode ^= 1;
                        ahd_set_modes(ahd, fifo_mode, fifo_mode);

                        if (ahd_scb_active_in_fifo(ahd, scb) == 0)
                                continue;

                        ahd_run_data_fifo(ahd, scb);

                        /*
                         * Running this FIFO may cause a CFG4DATA for
                         * this same transaction to assert in the other
                         * FIFO or a new snapshot SAVEPTRS interrupt
                         * in this FIFO.  Even running a FIFO may not
                         * clear the transaction if we are still waiting
                         * for data to drain to the host. We must loop
                         * until the transaction is not active in either
                         * FIFO just to be sure.  Reset our loop counter
                         * so we will visit both FIFOs again before
                         * declaring this transaction finished.  We
                         * also delay a bit so that status has a chance
                         * to change before we look at this FIFO again.
                         */
                        ahd_delay(200);
                        goto rescan_fifos;
                }
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                ahd_set_scbptr(ahd, scbid);
                if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0
                 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0
                  || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR)
                      & SG_LIST_NULL) != 0)) {
                        u_int comp_head;

                        /*
                         * The transfer completed with a residual.
                         * Place this SCB on the complete DMA list
                         * so that we update our in-core copy of the
                         * SCB before completing the command.
                         */
                        ahd_outb(ahd, SCB_SCSI_STATUS, 0);
                        ahd_outb(ahd, SCB_SGPTR,
                                 ahd_inb_scbram(ahd, SCB_SGPTR)
                                 | SG_STATUS_VALID);
                        ahd_outw(ahd, SCB_TAG, scbid);
                        ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL);
                        comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
                        if (SCBID_IS_NULL(comp_head)) {
                                ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid);
                                ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
                        } else {
                                u_int tail;

                                tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL);
                                ahd_set_scbptr(ahd, tail);
                                ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid);
                                ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
                                ahd_set_scbptr(ahd, scbid);
                        }
                } else
                        ahd_complete_scb(ahd, scb);
        }
        ahd_set_scbptr(ahd, saved_scbptr);

        /*
         * Setup for command channel portion of flush.
         */
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);

        /*
         * Wait for any inprogress DMA to complete and clear DMA state
         * if this is for an SCB in the qinfifo.
         */
        while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) {

                if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) {
                        if ((ccscbctl & ARRDONE) != 0)
                                break;
                } else if ((ccscbctl & CCSCBDONE) != 0)
                        break;
                ahd_delay(200);
        }
        /*
         * We leave the sequencer to cleanup in the case of DMA's to
         * update the qoutfifo.  In all other cases (DMA's to the
         * chip or a push of an SCB from the COMPLETE_DMA_SCB list),
         * we disable the DMA engine so that the sequencer will not
         * attempt to handle the DMA completion.
         */
        if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0)
                ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN));

        /*
         * Complete any SCBs that just finished
         * being DMA'ed into the qoutfifo.
         */
        ahd_run_qoutfifo(ahd);

        saved_scbptr = ahd_get_scbptr(ahd);
        /*
         * Manually update/complete any completed SCBs that are waiting to be
         * DMA'ed back up to the host.
         */
        scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
        while (!SCBID_IS_NULL(scbid)) {
                uint8_t *hscb_ptr;
                u_int    i;

                ahd_set_scbptr(ahd, scbid);
                next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: Warning - DMA-up and complete "
                               "SCB %d invalid\n", ahd_name(ahd), scbid);
                        continue;
                }
                hscb_ptr = (uint8_t *)scb->hscb;
                for (i = 0; i < sizeof(struct hardware_scb); i++)
                        *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i);

                ahd_complete_scb(ahd, scb);
                scbid = next_scbid;
        }
        ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
        ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);

        scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
        while (!SCBID_IS_NULL(scbid)) {

                ahd_set_scbptr(ahd, scbid);
                next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: Warning - Complete Qfrz SCB %d invalid\n",
                               ahd_name(ahd), scbid);
                        continue;
                }

                ahd_complete_scb(ahd, scb);
                scbid = next_scbid;
        }
        ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);

        scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD);
        while (!SCBID_IS_NULL(scbid)) {

                ahd_set_scbptr(ahd, scbid);
                next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: Warning - Complete SCB %d invalid\n",
                               ahd_name(ahd), scbid);
                        continue;
                }

                ahd_complete_scb(ahd, scb);
                scbid = next_scbid;
        }
        ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);

        /*
         * Restore state.
         */
        ahd_set_scbptr(ahd, saved_scbptr);
        ahd_restore_modes(ahd, saved_modes);
        ahd->flags |= AHD_UPDATE_PEND_CMDS;
}

/*
 * Determine if an SCB for a packetized transaction
 * is active in a FIFO.
 */
static int
ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb)
{

        /*
         * The FIFO is only active for our transaction if
         * the SCBPTR matches the SCB's ID and the firmware
         * has installed a handler for the FIFO or we have
         * a pending SAVEPTRS or CFG4DATA interrupt.
         */
        if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb)
         || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0
          && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0))
                return (0);

        return (1);
}

/*
 * Run a data fifo to completion for a transaction we know
 * has completed across the SCSI bus (good status has been
 * received).  We are already set to the correct FIFO mode
 * on entry to this routine.
 *
 * This function attempts to operate exactly as the firmware
 * would when running this FIFO.  Care must be taken to update
 * this routine any time the firmware's FIFO algorithm is
 * changed.
 */
static void
ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb)
{
        u_int seqintsrc;

        seqintsrc = ahd_inb(ahd, SEQINTSRC);
        if ((seqintsrc & CFG4DATA) != 0) {
                uint32_t datacnt;
                uint32_t sgptr;

                /*
                 * Clear full residual flag.
                 */
                sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID;
                ahd_outb(ahd, SCB_SGPTR, sgptr);

                /*
                 * Load datacnt and address.
                 */
                datacnt = ahd_inl_scbram(ahd, SCB_DATACNT);
                if ((datacnt & AHD_DMA_LAST_SEG) != 0) {
                        sgptr |= LAST_SEG;
                        ahd_outb(ahd, SG_STATE, 0);
                } else
                        ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
                ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR));
                ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK);
                ahd_outb(ahd, SG_CACHE_PRE, sgptr);
                ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);

                /*
                 * Initialize Residual Fields.
                 */
                ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24);
                ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK);

                /*
                 * Mark the SCB as having a FIFO in use.
                 */
                ahd_outb(ahd, SCB_FIFO_USE_COUNT,
                         ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1);

                /*
                 * Install a "fake" handler for this FIFO.
                 */
                ahd_outw(ahd, LONGJMP_ADDR, 0);

                /*
                 * Notify the hardware that we have satisfied
                 * this sequencer interrupt.
                 */
                ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA);
        } else if ((seqintsrc & SAVEPTRS) != 0) {
                uint32_t sgptr;
                uint32_t resid;

                if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) {
                        /*
                         * Snapshot Save Pointers.  All that
                         * is necessary to clear the snapshot
                         * is a CLRCHN.
                         */
                        goto clrchn;
                }

                /*
                 * Disable S/G fetch so the DMA engine
                 * is available to future users.
                 */
                if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
                        ahd_outb(ahd, CCSGCTL, 0);
                ahd_outb(ahd, SG_STATE, 0);

                /*
                 * Flush the data FIFO.  Strickly only
                 * necessary for Rev A parts.
                 */
                ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH);

                /*
                 * Calculate residual.
                 */
                sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
                resid = ahd_inl(ahd, SHCNT);
                resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24;
                ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid);
                if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) {
                        /*
                         * Must back up to the correct S/G element.
                         * Typically this just means resetting our
                         * low byte to the offset in the SG_CACHE,
                         * but if we wrapped, we have to correct
                         * the other bytes of the sgptr too.
                         */
                        if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0
                         && (sgptr & 0x80) == 0)
                                sgptr -= 0x100;
                        sgptr &= ~0xFF;
                        sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW)
                               & SG_ADDR_MASK;
                        ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
                        ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0);
                } else if ((resid & AHD_SG_LEN_MASK) == 0) {
                        ahd_outb(ahd, SCB_RESIDUAL_SGPTR,
                                 sgptr | SG_LIST_NULL);
                }
                /*
                 * Save Pointers.
                 */
                ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR));
                ahd_outl(ahd, SCB_DATACNT, resid);
                ahd_outl(ahd, SCB_SGPTR, sgptr);
                ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS);
                ahd_outb(ahd, SEQIMODE,
                         ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS);
                /*
                 * If the data is to the SCSI bus, we are
                 * done, otherwise wait for FIFOEMP.
                 */
                if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0)
                        goto clrchn;
        } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) {
                uint32_t sgptr;
                uint64_t data_addr;
                uint32_t data_len;
                u_int    dfcntrl;

                /*
                 * Disable S/G fetch so the DMA engine
                 * is available to future users.  We won't
                 * be using the DMA engine to load segments.
                 */
                if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) {
                        ahd_outb(ahd, CCSGCTL, 0);
                        ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
                }

                /*
                 * Wait for the DMA engine to notice that the
                 * host transfer is enabled and that there is
                 * space in the S/G FIFO for new segments before
                 * loading more segments.
                 */
                if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0
                 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) {

                        /*
                         * Determine the offset of the next S/G
                         * element to load.
                         */
                        sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
                        sgptr &= SG_PTR_MASK;
                        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
                                struct ahd_dma64_seg *sg;

                                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
                                data_addr = sg->addr;
                                data_len = sg->len;
                                sgptr += sizeof(*sg);
                        } else {
                                struct  ahd_dma_seg *sg;

                                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
                                data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK;
                                data_addr <<= 8;
                                data_addr |= sg->addr;
                                data_len = sg->len;
                                sgptr += sizeof(*sg);
                        }

                        /*
                         * Update residual information.
                         */
                        ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24);
                        ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);

                        /*
                         * Load the S/G.
                         */
                        if (data_len & AHD_DMA_LAST_SEG) {
                                sgptr |= LAST_SEG;
                                ahd_outb(ahd, SG_STATE, 0);
                        }
                        ahd_outq(ahd, HADDR, data_addr);
                        ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK);
                        ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF);

                        /*
                         * Advertise the segment to the hardware.
                         */
                        dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN;
                        if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) {
                                /*
                                 * Use SCSIENWRDIS so that SCSIEN
                                 * is never modified by this
                                 * operation.
                                 */
                                dfcntrl |= SCSIENWRDIS;
                        }
                        ahd_outb(ahd, DFCNTRL, dfcntrl);
                }
        } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) {

                /*
                 * Transfer completed to the end of SG list
                 * and has flushed to the host.
                 */
                ahd_outb(ahd, SCB_SGPTR,
                         ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL);
                goto clrchn;
        } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) {
clrchn:
                /*
                 * Clear any handler for this FIFO, decrement
                 * the FIFO use count for the SCB, and release
                 * the FIFO.
                 */
                ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
                ahd_outb(ahd, SCB_FIFO_USE_COUNT,
                         ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1);
                ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
        }
}

/*
 * Look for entries in the QoutFIFO that have completed.
 * The valid_tag completion field indicates the validity
 * of the entry - the valid value toggles each time through
 * the queue. We use the sg_status field in the completion
 * entry to avoid referencing the hscb if the completion
 * occurred with no errors and no residual.  sg_status is
 * a copy of the first byte (little endian) of the sgptr
 * hscb field.
 */
static void
ahd_run_qoutfifo(struct ahd_softc *ahd)
{
        struct ahd_completion *completion;
        struct scb *scb;
        u_int  scb_index;

        if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0)
                panic("ahd_run_qoutfifo recursion");
        ahd->flags |= AHD_RUNNING_QOUTFIFO;
        ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD);
        for (;;) {
                completion = &ahd->qoutfifo[ahd->qoutfifonext];

                if (completion->valid_tag != ahd->qoutfifonext_valid_tag)
                        break;

                scb_index = ahd_le16toh(completion->tag);
                scb = ahd_lookup_scb(ahd, scb_index);
                if (scb == NULL) {
                        printk("%s: WARNING no command for scb %d "
                               "(cmdcmplt)\nQOUTPOS = %d\n",
                               ahd_name(ahd), scb_index,
                               ahd->qoutfifonext);
                        ahd_dump_card_state(ahd);
                } else if ((completion->sg_status & SG_STATUS_VALID) != 0) {
                        ahd_handle_scb_status(ahd, scb);
                } else {
                        ahd_done(ahd, scb);
                }

                ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1);
                if (ahd->qoutfifonext == 0)
                        ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID;
        }
        ahd->flags &= ~AHD_RUNNING_QOUTFIFO;
}

/************************* Interrupt Handling *********************************/
static void
ahd_handle_hwerrint(struct ahd_softc *ahd)
{
        /*
         * Some catastrophic hardware error has occurred.
         * Print it for the user and disable the controller.
         */
        int i;
        int error;

        error = ahd_inb(ahd, ERROR);
        for (i = 0; i < num_errors; i++) {
                if ((error & ahd_hard_errors[i].errno) != 0)
                        printk("%s: hwerrint, %s\n",
                               ahd_name(ahd), ahd_hard_errors[i].errmesg);
        }

        ahd_dump_card_state(ahd);
        panic("BRKADRINT");

        /* Tell everyone that this HBA is no longer available */
        ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
                       CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
                       CAM_NO_HBA);

        /* Tell the system that this controller has gone away. */
        ahd_free(ahd);
}

#ifdef AHD_DEBUG
static void
ahd_dump_sglist(struct scb *scb)
{
        int i;

        if (scb->sg_count > 0) {
                if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) {
                        struct ahd_dma64_seg *sg_list;

                        sg_list = (struct ahd_dma64_seg*)scb->sg_list;
                        for (i = 0; i < scb->sg_count; i++) {
                                uint64_t addr;

                                addr = ahd_le64toh(sg_list[i].addr);
                                printk("sg[%d] - Addr 0x%x%x : Length %d%s\n",
                                       i,
                                       (uint32_t)((addr >> 32) & 0xFFFFFFFF),
                                       (uint32_t)(addr & 0xFFFFFFFF),
                                       sg_list[i].len & AHD_SG_LEN_MASK,
                                       (sg_list[i].len & AHD_DMA_LAST_SEG)
                                     ? " Last" : "");
                        }
                } else {
                        struct ahd_dma_seg *sg_list;

                        sg_list = (struct ahd_dma_seg*)scb->sg_list;
                        for (i = 0; i < scb->sg_count; i++) {
                                uint32_t len;

                                len = ahd_le32toh(sg_list[i].len);
                                printk("sg[%d] - Addr 0x%x%x : Length %d%s\n",
                                       i,
                                       (len & AHD_SG_HIGH_ADDR_MASK) >> 24,
                                       ahd_le32toh(sg_list[i].addr),
                                       len & AHD_SG_LEN_MASK,
                                       len & AHD_DMA_LAST_SEG ? " Last" : "");
                        }
                }
        }
}
#endif  /*  AHD_DEBUG  */

static void
ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
{
        u_int seqintcode;

        /*
         * Save the sequencer interrupt code and clear the SEQINT
         * bit. We will unpause the sequencer, if appropriate,
         * after servicing the request.
         */
        seqintcode = ahd_inb(ahd, SEQINTCODE);
        ahd_outb(ahd, CLRINT, CLRSEQINT);
        if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
                /*
                 * Unpause the sequencer and let it clear
                 * SEQINT by writing NO_SEQINT to it.  This
                 * will cause the sequencer to be paused again,
                 * which is the expected state of this routine.
                 */
                ahd_unpause(ahd);
                while (!ahd_is_paused(ahd))
                        ;
                ahd_outb(ahd, CLRINT, CLRSEQINT);
        }
        ahd_update_modes(ahd);
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MISC) != 0)
                printk("%s: Handle Seqint Called for code %d\n",
                       ahd_name(ahd), seqintcode);
#endif
        switch (seqintcode) {
        case ENTERING_NONPACK:
        {
                struct  scb *scb;
                u_int   scbid;

                AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                                 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        /*
                         * Somehow need to know if this
                         * is from a selection or reselection.
                         * From that, we can determine target
                         * ID so we at least have an I_T nexus.
                         */
                } else {
                        ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
                        ahd_outb(ahd, SAVED_LUN, scb->hscb->lun);
                        ahd_outb(ahd, SEQ_FLAGS, 0x0);
                }
                if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0
                 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
                        /*
                         * Phase change after read stream with
                         * CRC error with P0 asserted on last
                         * packet.
                         */
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
                                printk("%s: Assuming LQIPHASE_NLQ with "
                                       "P0 assertion\n", ahd_name(ahd));
#endif
                }
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
                        printk("%s: Entering NONPACK\n", ahd_name(ahd));
#endif
                break;
        }
        case INVALID_SEQINT:
                printk("%s: Invalid Sequencer interrupt occurred, "
                       "resetting channel.\n",
                       ahd_name(ahd));
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
                        ahd_dump_card_state(ahd);
#endif
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                break;
        case STATUS_OVERRUN:
        {
                struct  scb *scb;
                u_int   scbid;

                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb != NULL)
                        ahd_print_path(ahd, scb);
                else
                        printk("%s: ", ahd_name(ahd));
                printk("SCB %d Packetized Status Overrun", scbid);
                ahd_dump_card_state(ahd);
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                break;
        }
        case CFG4ISTAT_INTR:
        {
                struct  scb *scb;
                u_int   scbid;

                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        ahd_dump_card_state(ahd);
                        printk("CFG4ISTAT: Free SCB %d referenced", scbid);
                        panic("For safety");
                }
                ahd_outq(ahd, HADDR, scb->sense_busaddr);
                ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE);
                ahd_outb(ahd, HCNT + 2, 0);
                ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG);
                ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
                break;
        }
        case ILLEGAL_PHASE:
        {
                u_int bus_phase;

                bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
                printk("%s: ILLEGAL_PHASE 0x%x\n",
                       ahd_name(ahd), bus_phase);

                switch (bus_phase) {
                case P_DATAOUT:
                case P_DATAIN:
                case P_DATAOUT_DT:
                case P_DATAIN_DT:
                case P_MESGOUT:
                case P_STATUS:
                case P_MESGIN:
                        ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                        printk("%s: Issued Bus Reset.\n", ahd_name(ahd));
                        break;
                case P_COMMAND:
                {
                        struct  ahd_devinfo devinfo;
                        struct  scb *scb;
                        u_int   scbid;

                        /*
                         * If a target takes us into the command phase
                         * assume that it has been externally reset and
                         * has thus lost our previous packetized negotiation
                         * agreement.  Since we have not sent an identify
                         * message and may not have fully qualified the
                         * connection, we change our command to TUR, assert
                         * ATN and ABORT the task when we go to message in
                         * phase.  The OSM will see the REQUEUE_REQUEST
                         * status and retry the command.
                         */
                        scbid = ahd_get_scbptr(ahd);
                        scb = ahd_lookup_scb(ahd, scbid);
                        if (scb == NULL) {
                                printk("Invalid phase with no valid SCB.  "
                                       "Resetting bus.\n");
                                ahd_reset_channel(ahd, 'A',
                                                  /*Initiate Reset*/TRUE);
                                break;
                        }
                        ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
                                            SCB_GET_TARGET(ahd, scb),
                                            SCB_GET_LUN(scb),
                                            SCB_GET_CHANNEL(ahd, scb),
                                            ROLE_INITIATOR);
                        ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                                      AHD_TRANS_ACTIVE, /*paused*/TRUE);
                        ahd_set_syncrate(ahd, &devinfo, /*period*/0,
                                         /*offset*/0, /*ppr_options*/0,
                                         AHD_TRANS_ACTIVE, /*paused*/TRUE);
                        /* Hand-craft TUR command */
                        ahd_outb(ahd, SCB_CDB_STORE, 0);
                        ahd_outb(ahd, SCB_CDB_STORE+1, 0);
                        ahd_outb(ahd, SCB_CDB_STORE+2, 0);
                        ahd_outb(ahd, SCB_CDB_STORE+3, 0);
                        ahd_outb(ahd, SCB_CDB_STORE+4, 0);
                        ahd_outb(ahd, SCB_CDB_STORE+5, 0);
                        ahd_outb(ahd, SCB_CDB_LEN, 6);
                        scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE);
                        scb->hscb->control |= MK_MESSAGE;
                        ahd_outb(ahd, SCB_CONTROL, scb->hscb->control);
                        ahd_outb(ahd, MSG_OUT, HOST_MSG);
                        ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
                        /*
                         * The lun is 0, regardless of the SCB's lun
                         * as we have not sent an identify message.
                         */
                        ahd_outb(ahd, SAVED_LUN, 0);
                        ahd_outb(ahd, SEQ_FLAGS, 0);
                        ahd_assert_atn(ahd);
                        scb->flags &= ~SCB_PACKETIZED;
                        scb->flags |= SCB_ABORT|SCB_EXTERNAL_RESET;
                        ahd_freeze_devq(ahd, scb);
                        ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
                        ahd_freeze_scb(scb);

                        /* Notify XPT */
                        ahd_send_async(ahd, devinfo.channel, devinfo.target,
                                       CAM_LUN_WILDCARD, AC_SENT_BDR);

                        /*
                         * Allow the sequencer to continue with
                         * non-pack processing.
                         */
                        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                        ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT);
                        if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
                                ahd_outb(ahd, CLRLQOINT1, 0);
                        }
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
                                ahd_print_path(ahd, scb);
                                printk("Unexpected command phase from "
                                       "packetized target\n");
                        }
#endif
                        break;
                }
                }
                break;
        }
        case CFG4OVERRUN:
        {
                struct  scb *scb;
                u_int   scb_index;

#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
                        printk("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
                               ahd_inb(ahd, MODE_PTR));
                }
#endif
                scb_index = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scb_index);
                if (scb == NULL) {
                        /*
                         * Attempt to transfer to an SCB that is
                         * not outstanding.
                         */
                        ahd_assert_atn(ahd);
                        ahd_outb(ahd, MSG_OUT, HOST_MSG);
                        ahd->msgout_buf[0] = ABORT_TASK;
                        ahd->msgout_len = 1;
                        ahd->msgout_index = 0;
                        ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
                        /*
                         * Clear status received flag to prevent any
                         * attempt to complete this bogus SCB.
                         */
                        ahd_outb(ahd, SCB_CONTROL,
                                 ahd_inb_scbram(ahd, SCB_CONTROL)
                                 & ~STATUS_RCVD);
                }
                break;
        }
        case DUMP_CARD_STATE:
        {
                ahd_dump_card_state(ahd);
                break;
        }
        case PDATA_REINIT:
        {
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
                        printk("%s: PDATA_REINIT - DFCNTRL = 0x%x "
                               "SG_CACHE_SHADOW = 0x%x\n",
                               ahd_name(ahd), ahd_inb(ahd, DFCNTRL),
                               ahd_inb(ahd, SG_CACHE_SHADOW));
                }
#endif
                ahd_reinitialize_dataptrs(ahd);
                break;
        }
        case HOST_MSG_LOOP:
        {
                struct ahd_devinfo devinfo;

                /*
                 * The sequencer has encountered a message phase
                 * that requires host assistance for completion.
                 * While handling the message phase(s), we will be
                 * notified by the sequencer after each byte is
                 * transferred so we can track bus phase changes.
                 *
                 * If this is the first time we've seen a HOST_MSG_LOOP
                 * interrupt, initialize the state of the host message
                 * loop.
                 */
                ahd_fetch_devinfo(ahd, &devinfo);
                if (ahd->msg_type == MSG_TYPE_NONE) {
                        struct scb *scb;
                        u_int scb_index;
                        u_int bus_phase;

                        bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
                        if (bus_phase != P_MESGIN
                         && bus_phase != P_MESGOUT) {
                                printk("ahd_intr: HOST_MSG_LOOP bad "
                                       "phase 0x%x\n", bus_phase);
                                /*
                                 * Probably transitioned to bus free before
                                 * we got here.  Just punt the message.
                                 */
                                ahd_dump_card_state(ahd);
                                ahd_clear_intstat(ahd);
                                ahd_restart(ahd);
                                return;
                        }

                        scb_index = ahd_get_scbptr(ahd);
                        scb = ahd_lookup_scb(ahd, scb_index);
                        if (devinfo.role == ROLE_INITIATOR) {
                                if (bus_phase == P_MESGOUT)
                                        ahd_setup_initiator_msgout(ahd,
                                                                   &devinfo,
                                                                   scb);
                                else {
                                        ahd->msg_type =
                                            MSG_TYPE_INITIATOR_MSGIN;
                                        ahd->msgin_index = 0;
                                }
                        }
#ifdef AHD_TARGET_MODE
                        else {
                                if (bus_phase == P_MESGOUT) {
                                        ahd->msg_type =
                                            MSG_TYPE_TARGET_MSGOUT;
                                        ahd->msgin_index = 0;
                                } else
                                        ahd_setup_target_msgin(ahd,
                                                               &devinfo,
                                                               scb);
                        }
#endif
                }

                ahd_handle_message_phase(ahd);
                break;
        }
        case NO_MATCH:
        {
                /* Ensure we don't leave the selection hardware on */
                AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
                ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);

                printk("%s:%c:%d: no active SCB for reconnecting "
                       "target - issuing BUS DEVICE RESET\n",
                       ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4);
                printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
                       "REG0 == 0x%x ACCUM = 0x%x\n",
                       ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN),
                       ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM));
                printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
                       "SINDEX == 0x%x\n",
                       ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd),
                       ahd_find_busy_tcl(ahd,
                                         BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID),
                                                   ahd_inb(ahd, SAVED_LUN))),
                       ahd_inw(ahd, SINDEX));
                printk("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
                       "SCB_CONTROL == 0x%x\n",
                       ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID),
                       ahd_inb_scbram(ahd, SCB_LUN),
                       ahd_inb_scbram(ahd, SCB_CONTROL));
                printk("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
                       ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI));
                printk("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
                printk("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
                ahd_dump_card_state(ahd);
                ahd->msgout_buf[0] = TARGET_RESET;
                ahd->msgout_len = 1;
                ahd->msgout_index = 0;
                ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
                ahd_outb(ahd, MSG_OUT, HOST_MSG);
                ahd_assert_atn(ahd);
                break;
        }
        case PROTO_VIOLATION:
        {
                ahd_handle_proto_violation(ahd);
                break;
        }
        case IGN_WIDE_RES:
        {
                struct ahd_devinfo devinfo;

                ahd_fetch_devinfo(ahd, &devinfo);
                ahd_handle_ign_wide_residue(ahd, &devinfo);
                break;
        }
        case BAD_PHASE:
        {
                u_int lastphase;

                lastphase = ahd_inb(ahd, LASTPHASE);
                printk("%s:%c:%d: unknown scsi bus phase %x, "
                       "lastphase = 0x%x.  Attempting to continue\n",
                       ahd_name(ahd), 'A',
                       SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
                       lastphase, ahd_inb(ahd, SCSISIGI));
                break;
        }
        case MISSED_BUSFREE:
        {
                u_int lastphase;

                lastphase = ahd_inb(ahd, LASTPHASE);
                printk("%s:%c:%d: Missed busfree. "
                       "Lastphase = 0x%x, Curphase = 0x%x\n",
                       ahd_name(ahd), 'A',
                       SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
                       lastphase, ahd_inb(ahd, SCSISIGI));
                ahd_restart(ahd);
                return;
        }
        case DATA_OVERRUN:
        {
                /*
                 * When the sequencer detects an overrun, it
                 * places the controller in "BITBUCKET" mode
                 * and allows the target to complete its transfer.
                 * Unfortunately, none of the counters get updated
                 * when the controller is in this mode, so we have
                 * no way of knowing how large the overrun was.
                 */
                struct  scb *scb;
                u_int   scbindex;
#ifdef AHD_DEBUG
                u_int   lastphase;
#endif

                scbindex = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbindex);
#ifdef AHD_DEBUG
                lastphase = ahd_inb(ahd, LASTPHASE);
                if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
                        ahd_print_path(ahd, scb);
                        printk("data overrun detected %s.  Tag == 0x%x.\n",
                               ahd_lookup_phase_entry(lastphase)->phasemsg,
                               SCB_GET_TAG(scb));
                        ahd_print_path(ahd, scb);
                        printk("%s seen Data Phase.  Length = %ld.  "
                               "NumSGs = %d.\n",
                               ahd_inb(ahd, SEQ_FLAGS) & DPHASE
                               ? "Have" : "Haven't",
                               ahd_get_transfer_length(scb), scb->sg_count);
                        ahd_dump_sglist(scb);
                }
#endif

                /*
                 * Set this and it will take effect when the
                 * target does a command complete.
                 */
                ahd_freeze_devq(ahd, scb);
                ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
                ahd_freeze_scb(scb);
                break;
        }
        case MKMSG_FAILED:
        {
                struct ahd_devinfo devinfo;
                struct scb *scb;
                u_int scbid;

                ahd_fetch_devinfo(ahd, &devinfo);
                printk("%s:%c:%d:%d: Attempt to issue message failed\n",
                       ahd_name(ahd), devinfo.channel, devinfo.target,
                       devinfo.lun);
                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb != NULL
                 && (scb->flags & SCB_RECOVERY_SCB) != 0)
                        /*
                         * Ensure that we didn't put a second instance of this
                         * SCB into the QINFIFO.
                         */
                        ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
                                           SCB_GET_CHANNEL(ahd, scb),
                                           SCB_GET_LUN(scb), SCB_GET_TAG(scb),
                                           ROLE_INITIATOR, /*status*/0,
                                           SEARCH_REMOVE);
                ahd_outb(ahd, SCB_CONTROL,
                         ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
                break;
        }
        case TASKMGMT_FUNC_COMPLETE:
        {
                u_int   scbid;
                struct  scb *scb;

                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb != NULL) {
                        u_int      lun;
                        u_int      tag;
                        cam_status error;

                        ahd_print_path(ahd, scb);
                        printk("Task Management Func 0x%x Complete\n",
                               scb->hscb->task_management);
                        lun = CAM_LUN_WILDCARD;
                        tag = SCB_LIST_NULL;

                        switch (scb->hscb->task_management) {
                        case SIU_TASKMGMT_ABORT_TASK:
                                tag = SCB_GET_TAG(scb);
                                fallthrough;
                        case SIU_TASKMGMT_ABORT_TASK_SET:
                        case SIU_TASKMGMT_CLEAR_TASK_SET:
                                lun = scb->hscb->lun;
                                error = CAM_REQ_ABORTED;
                                ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
                                               'A', lun, tag, ROLE_INITIATOR,
                                               error);
                                break;
                        case SIU_TASKMGMT_LUN_RESET:
                                lun = scb->hscb->lun;
                                fallthrough;
                        case SIU_TASKMGMT_TARGET_RESET:
                        {
                                struct ahd_devinfo devinfo;

                                ahd_scb_devinfo(ahd, &devinfo, scb);
                                error = CAM_BDR_SENT;
                                ahd_handle_devreset(ahd, &devinfo, lun,
                                                    CAM_BDR_SENT,
                                                    lun != CAM_LUN_WILDCARD
                                                    ? "Lun Reset"
                                                    : "Target Reset",
                                                    /*verbose_level*/0);
                                break;
                        }
                        default:
                                panic("Unexpected TaskMgmt Func\n");
                                break;
                        }
                }
                break;
        }
        case TASKMGMT_CMD_CMPLT_OKAY:
        {
                u_int   scbid;
                struct  scb *scb;

                /*
                 * An ABORT TASK TMF failed to be delivered before
                 * the targeted command completed normally.
                 */
                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb != NULL) {
                        /*
                         * Remove the second instance of this SCB from
                         * the QINFIFO if it is still there.
                         */
                        ahd_print_path(ahd, scb);
                        printk("SCB completes before TMF\n");
                        /*
                         * Handle losing the race.  Wait until any
                         * current selection completes.  We will then
                         * set the TMF back to zero in this SCB so that
                         * the sequencer doesn't bother to issue another
                         * sequencer interrupt for its completion.
                         */
                        while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
                            && (ahd_inb(ahd, SSTAT0) & SELDO) == 0
                            && (ahd_inb(ahd, SSTAT1) & SELTO) == 0)
                                ;
                        ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0);
                        ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
                                           SCB_GET_CHANNEL(ahd, scb),
                                           SCB_GET_LUN(scb), SCB_GET_TAG(scb),
                                           ROLE_INITIATOR, /*status*/0,
                                           SEARCH_REMOVE);
                }
                break;
        }
        case TRACEPOINT0:
        case TRACEPOINT1:
        case TRACEPOINT2:
        case TRACEPOINT3:
                printk("%s: Tracepoint %d\n", ahd_name(ahd),
                       seqintcode - TRACEPOINT0);
                break;
        case NO_SEQINT:
                break;
        case SAW_HWERR:
                ahd_handle_hwerrint(ahd);
                break;
        default:
                printk("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
                       seqintcode);
                break;
        }
        /*
         *  The sequencer is paused immediately on
         *  a SEQINT, so we should restart it when
         *  we're done.
         */
        ahd_unpause(ahd);
}

static void
ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
{
        struct scb      *scb;
        u_int            status0;
        u_int            status3;
        u_int            status;
        u_int            lqistat1;
        u_int            lqostat0;
        u_int            scbid;
        u_int            busfreetime;

        ahd_update_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR);
        status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO);
        status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
        lqistat1 = ahd_inb(ahd, LQISTAT1);
        lqostat0 = ahd_inb(ahd, LQOSTAT0);
        busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;

        /*
         * Ignore external resets after a bus reset.
         */
        if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE)) {
                ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
                return;
        }

        /*
         * Clear bus reset flag
         */
        ahd->flags &= ~AHD_BUS_RESET_ACTIVE;

        if ((status0 & (SELDI|SELDO)) != 0) {
                u_int simode0;

                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                simode0 = ahd_inb(ahd, SIMODE0);
                status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO);
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        }
        scbid = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scbid);
        if (scb != NULL
         && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
                scb = NULL;

        if ((status0 & IOERR) != 0) {
                u_int now_lvd;

                now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40;
                printk("%s: Transceiver State Has Changed to %s mode\n",
                       ahd_name(ahd), now_lvd ? "LVD" : "SE");
                ahd_outb(ahd, CLRSINT0, CLRIOERR);
                /*
                 * A change in I/O mode is equivalent to a bus reset.
                 */
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                ahd_pause(ahd);
                ahd_setup_iocell_workaround(ahd);
                ahd_unpause(ahd);
        } else if ((status0 & OVERRUN) != 0) {

                printk("%s: SCSI offset overrun detected.  Resetting bus.\n",
                       ahd_name(ahd));
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
        } else if ((status & SCSIRSTI) != 0) {

                printk("%s: Someone reset channel A\n", ahd_name(ahd));
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE);
        } else if ((status & SCSIPERR) != 0) {

                /* Make sure the sequencer is in a safe location. */
                ahd_clear_critical_section(ahd);

                ahd_handle_transmission_error(ahd);
        } else if (lqostat0 != 0) {

                printk("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
                ahd_outb(ahd, CLRLQOINT0, lqostat0);
                if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
                        ahd_outb(ahd, CLRLQOINT1, 0);
        } else if ((status & SELTO) != 0) {
                /* Stop the selection */
                ahd_outb(ahd, SCSISEQ0, 0);

                /* Make sure the sequencer is in a safe location. */
                ahd_clear_critical_section(ahd);

                /* No more pending messages */
                ahd_clear_msg_state(ahd);

                /* Clear interrupt state */
                ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);

                /*
                 * Although the driver does not care about the
                 * 'Selection in Progress' status bit, the busy
                 * LED does.  SELINGO is only cleared by a successful
                 * selection, so we must manually clear it to insure
                 * the LED turns off just incase no future successful
                 * selections occur (e.g. no devices on the bus).
                 */
                ahd_outb(ahd, CLRSINT0, CLRSELINGO);

                scbid = ahd_inw(ahd, WAITING_TID_HEAD);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: ahd_intr - referenced scb not "
                               "valid during SELTO scb(0x%x)\n",
                               ahd_name(ahd), scbid);
                        ahd_dump_card_state(ahd);
                } else {
                        struct ahd_devinfo devinfo;
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_SELTO) != 0) {
                                ahd_print_path(ahd, scb);
                                printk("Saw Selection Timeout for SCB 0x%x\n",
                                       scbid);
                        }
#endif
                        ahd_scb_devinfo(ahd, &devinfo, scb);
                        ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT);
                        ahd_freeze_devq(ahd, scb);

                        /*
                         * Cancel any pending transactions on the device
                         * now that it seems to be missing.  This will
                         * also revert us to async/narrow transfers until
                         * we can renegotiate with the device.
                         */
                        ahd_handle_devreset(ahd, &devinfo,
                                            CAM_LUN_WILDCARD,
                                            CAM_SEL_TIMEOUT,
                                            "Selection Timeout",
                                            /*verbose_level*/1);
                }
                ahd_outb(ahd, CLRINT, CLRSCSIINT);
                ahd_iocell_first_selection(ahd);
                ahd_unpause(ahd);
        } else if ((status0 & (SELDI|SELDO)) != 0) {

                ahd_iocell_first_selection(ahd);
                ahd_unpause(ahd);
        } else if (status3 != 0) {
                printk("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
                       ahd_name(ahd), status3);
                ahd_outb(ahd, CLRSINT3, status3);
        } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) {

                /* Make sure the sequencer is in a safe location. */
                ahd_clear_critical_section(ahd);

                ahd_handle_lqiphase_error(ahd, lqistat1);
        } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
                /*
                 * This status can be delayed during some
                 * streaming operations.  The SCSIPHASE
                 * handler has already dealt with this case
                 * so just clear the error.
                 */
                ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
        } else if ((status & BUSFREE) != 0
                || (lqistat1 & LQOBUSFREE) != 0) {
                u_int lqostat1;
                int   restart;
                int   clear_fifo;
                int   packetized;
                u_int mode;

                /*
                 * Clear our selection hardware as soon as possible.
                 * We may have an entry in the waiting Q for this target,
                 * that is affected by this busfree and we don't want to
                 * go about selecting the target while we handle the event.
                 */
                ahd_outb(ahd, SCSISEQ0, 0);

                /* Make sure the sequencer is in a safe location. */
                ahd_clear_critical_section(ahd);

                /*
                 * Determine what we were up to at the time of
                 * the busfree.
                 */
                mode = AHD_MODE_SCSI;
                busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
                lqostat1 = ahd_inb(ahd, LQOSTAT1);
                switch (busfreetime) {
                case BUSFREE_DFF0:
                case BUSFREE_DFF1:
                {
                        mode = busfreetime == BUSFREE_DFF0
                             ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
                        ahd_set_modes(ahd, mode, mode);
                        scbid = ahd_get_scbptr(ahd);
                        scb = ahd_lookup_scb(ahd, scbid);
                        if (scb == NULL) {
                                printk("%s: Invalid SCB %d in DFF%d "
                                       "during unexpected busfree\n",
                                       ahd_name(ahd), scbid, mode);
                                packetized = 0;
                        } else
                                packetized = (scb->flags & SCB_PACKETIZED) != 0;
                        clear_fifo = 1;
                        break;
                }
                case BUSFREE_LQO:
                        clear_fifo = 0;
                        packetized = 1;
                        break;
                default:
                        clear_fifo = 0;
                        packetized =  (lqostat1 & LQOBUSFREE) != 0;
                        if (!packetized
                         && ahd_inb(ahd, LASTPHASE) == P_BUSFREE
                         && (ahd_inb(ahd, SSTAT0) & SELDI) == 0
                         && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0
                          || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0))
                                /*
                                 * Assume packetized if we are not
                                 * on the bus in a non-packetized
                                 * capacity and any pending selection
                                 * was a packetized selection.
                                 */
                                packetized = 1;
                        break;
                }

#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MISC) != 0)
                        printk("Saw Busfree.  Busfreetime = 0x%x.\n",
                               busfreetime);
#endif
                /*
                 * Busfrees that occur in non-packetized phases are
                 * handled by the nonpkt_busfree handler.
                 */
                if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) {
                        restart = ahd_handle_pkt_busfree(ahd, busfreetime);
                } else {
                        packetized = 0;
                        restart = ahd_handle_nonpkt_busfree(ahd);
                }
                /*
                 * Clear the busfree interrupt status.  The setting of
                 * the interrupt is a pulse, so in a perfect world, we
                 * would not need to muck with the ENBUSFREE logic.  This
                 * would ensure that if the bus moves on to another
                 * connection, busfree protection is still in force.  If
                 * BUSFREEREV is broken, however, we must manually clear
                 * the ENBUSFREE if the busfree occurred during a non-pack
                 * connection so that we don't get false positives during
                 * future, packetized, connections.
                 */
                ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
                if (packetized == 0
                 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0)
                        ahd_outb(ahd, SIMODE1,
                                 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE);

                if (clear_fifo)
                        ahd_clear_fifo(ahd, mode);

                ahd_clear_msg_state(ahd);
                ahd_outb(ahd, CLRINT, CLRSCSIINT);
                if (restart) {
                        ahd_restart(ahd);
                } else {
                        ahd_unpause(ahd);
                }
        } else {
                printk("%s: Missing case in ahd_handle_scsiint. status = %x\n",
                       ahd_name(ahd), status);
                ahd_dump_card_state(ahd);
                ahd_clear_intstat(ahd);
                ahd_unpause(ahd);
        }
}

static void
ahd_handle_transmission_error(struct ahd_softc *ahd)
{
        struct  scb *scb;
        u_int   scbid;
        u_int   lqistat1;
        u_int   msg_out;
        u_int   curphase;
        u_int   lastphase;
        u_int   perrdiag;
        u_int   cur_col;
        int     silent;

        scb = NULL;
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ);
        ahd_inb(ahd, LQISTAT2);
        if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0
         && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) {
                u_int lqistate;

                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                lqistate = ahd_inb(ahd, LQISTATE);
                if ((lqistate >= 0x1E && lqistate <= 0x24)
                 || (lqistate == 0x29)) {
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
                                printk("%s: NLQCRC found via LQISTATE\n",
                                       ahd_name(ahd));
                        }
#endif
                        lqistat1 |= LQICRCI_NLQ;
                }
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        }

        ahd_outb(ahd, CLRLQIINT1, lqistat1);
        lastphase = ahd_inb(ahd, LASTPHASE);
        curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
        perrdiag = ahd_inb(ahd, PERRDIAG);
        msg_out = INITIATOR_ERROR;
        ahd_outb(ahd, CLRSINT1, CLRSCSIPERR);

        /*
         * Try to find the SCB associated with this error.
         */
        silent = FALSE;
        if (lqistat1 == 0
         || (lqistat1 & LQICRCI_NLQ) != 0) {
                if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0)
                        ahd_set_active_fifo(ahd);
                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb != NULL && SCB_IS_SILENT(scb))
                        silent = TRUE;
        }

        cur_col = 0;
        if (silent == FALSE) {
                printk("%s: Transmission error detected\n", ahd_name(ahd));
                ahd_lqistat1_print(lqistat1, &cur_col, 50);
                ahd_lastphase_print(lastphase, &cur_col, 50);
                ahd_scsisigi_print(curphase, &cur_col, 50);
                ahd_perrdiag_print(perrdiag, &cur_col, 50);
                printk("\n");
                ahd_dump_card_state(ahd);
        }

        if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) {
                if (silent == FALSE) {
                        printk("%s: Gross protocol error during incoming "
                               "packet.  lqistat1 == 0x%x.  Resetting bus.\n",
                               ahd_name(ahd), lqistat1);
                }
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                return;
        } else if ((lqistat1 & LQICRCI_LQ) != 0) {
                /*
                 * A CRC error has been detected on an incoming LQ.
                 * The bus is currently hung on the last ACK.
                 * Hit LQIRETRY to release the last ack, and
                 * wait for the sequencer to determine that ATNO
                 * is asserted while in message out to take us
                 * to our host message loop.  No NONPACKREQ or
                 * LQIPHASE type errors will occur in this
                 * scenario.  After this first LQIRETRY, the LQI
                 * manager will be in ISELO where it will
                 * happily sit until another packet phase begins.
                 * Unexpected bus free detection is enabled
                 * through any phases that occur after we release
                 * this last ack until the LQI manager sees a
                 * packet phase.  This implies we may have to
                 * ignore a perfectly valid "unexected busfree"
                 * after our "initiator detected error" message is
                 * sent.  A busfree is the expected response after
                 * we tell the target that it's L_Q was corrupted.
                 * (SPI4R09 10.7.3.3.3)
                 */
                ahd_outb(ahd, LQCTL2, LQIRETRY);
                printk("LQIRetry for LQICRCI_LQ to release ACK\n");
        } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
                /*
                 * We detected a CRC error in a NON-LQ packet.
                 * The hardware has varying behavior in this situation
                 * depending on whether this packet was part of a
                 * stream or not.
                 *
                 * PKT by PKT mode:
                 * The hardware has already acked the complete packet.
                 * If the target honors our outstanding ATN condition,
                 * we should be (or soon will be) in MSGOUT phase.
                 * This will trigger the LQIPHASE_LQ status bit as the
                 * hardware was expecting another LQ.  Unexpected
                 * busfree detection is enabled.  Once LQIPHASE_LQ is
                 * true (first entry into host message loop is much
                 * the same), we must clear LQIPHASE_LQ and hit
                 * LQIRETRY so the hardware is ready to handle
                 * a future LQ.  NONPACKREQ will not be asserted again
                 * once we hit LQIRETRY until another packet is
                 * processed.  The target may either go busfree
                 * or start another packet in response to our message.
                 *
                 * Read Streaming P0 asserted:
                 * If we raise ATN and the target completes the entire
                 * stream (P0 asserted during the last packet), the
                 * hardware will ack all data and return to the ISTART
                 * state.  When the target reponds to our ATN condition,
                 * LQIPHASE_LQ will be asserted.  We should respond to
                 * this with an LQIRETRY to prepare for any future
                 * packets.  NONPACKREQ will not be asserted again
                 * once we hit LQIRETRY until another packet is
                 * processed.  The target may either go busfree or
                 * start another packet in response to our message.
                 * Busfree detection is enabled.
                 *
                 * Read Streaming P0 not asserted:
                 * If we raise ATN and the target transitions to
                 * MSGOUT in or after a packet where P0 is not
                 * asserted, the hardware will assert LQIPHASE_NLQ.
                 * We should respond to the LQIPHASE_NLQ with an
                 * LQIRETRY.  Should the target stay in a non-pkt
                 * phase after we send our message, the hardware
                 * will assert LQIPHASE_LQ.  Recovery is then just as
                 * listed above for the read streaming with P0 asserted.
                 * Busfree detection is enabled.
                 */
                if (silent == FALSE)
                        printk("LQICRC_NLQ\n");
                if (scb == NULL) {
                        printk("%s: No SCB valid for LQICRC_NLQ.  "
                               "Resetting bus\n", ahd_name(ahd));
                        ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                        return;
                }
        } else if ((lqistat1 & LQIBADLQI) != 0) {
                printk("Need to handle BADLQI!\n");
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
                return;
        } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) {
                if ((curphase & ~P_DATAIN_DT) != 0) {
                        /* Ack the byte.  So we can continue. */
                        if (silent == FALSE)
                                printk("Acking %s to clear perror\n",
                                    ahd_lookup_phase_entry(curphase)->phasemsg);
                        ahd_inb(ahd, SCSIDAT);
                }

                if (curphase == P_MESGIN)
                        msg_out = MSG_PARITY_ERROR;
        }

        /*
         * We've set the hardware to assert ATN if we
         * get a parity error on "in" phases, so all we
         * need to do is stuff the message buffer with
         * the appropriate message.  "In" phases have set
         * mesg_out to something other than NOP.
         */
        ahd->send_msg_perror = msg_out;
        if (scb != NULL && msg_out == INITIATOR_ERROR)
                scb->flags |= SCB_TRANSMISSION_ERROR;
        ahd_outb(ahd, MSG_OUT, HOST_MSG);
        ahd_outb(ahd, CLRINT, CLRSCSIINT);
        ahd_unpause(ahd);
}

static void
ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1)
{
        /*
         * Clear the sources of the interrupts.
         */
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        ahd_outb(ahd, CLRLQIINT1, lqistat1);

        /*
         * If the "illegal" phase changes were in response
         * to our ATN to flag a CRC error, AND we ended up
         * on packet boundaries, clear the error, restart the
         * LQI manager as appropriate, and go on our merry
         * way toward sending the message.  Otherwise, reset
         * the bus to clear the error.
         */
        ahd_set_active_fifo(ahd);
        if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0
         && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) {
                if ((lqistat1 & LQIPHASE_LQ) != 0) {
                        printk("LQIRETRY for LQIPHASE_LQ\n");
                        ahd_outb(ahd, LQCTL2, LQIRETRY);
                } else if ((lqistat1 & LQIPHASE_NLQ) != 0) {
                        printk("LQIRETRY for LQIPHASE_NLQ\n");
                        ahd_outb(ahd, LQCTL2, LQIRETRY);
                } else
                        panic("ahd_handle_lqiphase_error: No phase errors\n");
                ahd_dump_card_state(ahd);
                ahd_outb(ahd, CLRINT, CLRSCSIINT);
                ahd_unpause(ahd);
        } else {
                printk("Resetting Channel for LQI Phase error\n");
                ahd_dump_card_state(ahd);
                ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
        }
}

/*
 * Packetized unexpected or expected busfree.
 * Entered in mode based on busfreetime.
 */
static int
ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime)
{
        u_int lqostat1;

        AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                         ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
        lqostat1 = ahd_inb(ahd, LQOSTAT1);
        if ((lqostat1 & LQOBUSFREE) != 0) {
                struct scb *scb;
                u_int scbid;
                u_int saved_scbptr;
                u_int waiting_h;
                u_int waiting_t;
                u_int next;

                /*
                 * The LQO manager detected an unexpected busfree
                 * either:
                 *
                 * 1) During an outgoing LQ.
                 * 2) After an outgoing LQ but before the first
                 *    REQ of the command packet.
                 * 3) During an outgoing command packet.
                 *
                 * In all cases, CURRSCB is pointing to the
                 * SCB that encountered the failure.  Clean
                 * up the queue, clear SELDO and LQOBUSFREE,
                 * and allow the sequencer to restart the select
                 * out at its lesure.
                 */
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                scbid = ahd_inw(ahd, CURRSCB);
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL)
                       panic("SCB not valid during LQOBUSFREE");
                /*
                 * Clear the status.
                 */
                ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE);
                if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
                        ahd_outb(ahd, CLRLQOINT1, 0);
                ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
                ahd_flush_device_writes(ahd);
                ahd_outb(ahd, CLRSINT0, CLRSELDO);

                /*
                 * Return the LQO manager to its idle loop.  It will
                 * not do this automatically if the busfree occurs
                 * after the first REQ of either the LQ or command
                 * packet or between the LQ and command packet.
                 */
                ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE);

                /*
                 * Update the waiting for selection queue so
                 * we restart on the correct SCB.
                 */
                waiting_h = ahd_inw(ahd, WAITING_TID_HEAD);
                saved_scbptr = ahd_get_scbptr(ahd);
                if (waiting_h != scbid) {

                        ahd_outw(ahd, WAITING_TID_HEAD, scbid);
                        waiting_t = ahd_inw(ahd, WAITING_TID_TAIL);
                        if (waiting_t == waiting_h) {
                                ahd_outw(ahd, WAITING_TID_TAIL, scbid);
                                next = SCB_LIST_NULL;
                        } else {
                                ahd_set_scbptr(ahd, waiting_h);
                                next = ahd_inw_scbram(ahd, SCB_NEXT2);
                        }
                        ahd_set_scbptr(ahd, scbid);
                        ahd_outw(ahd, SCB_NEXT2, next);
                }
                ahd_set_scbptr(ahd, saved_scbptr);
                if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) {
                        if (SCB_IS_SILENT(scb) == FALSE) {
                                ahd_print_path(ahd, scb);
                                printk("Probable outgoing LQ CRC error.  "
                                       "Retrying command\n");
                        }
                        scb->crc_retry_count++;
                } else {
                        ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
                        ahd_freeze_scb(scb);
                        ahd_freeze_devq(ahd, scb);
                }
                /* Return unpausing the sequencer. */
                return (0);
        } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) {
                /*
                 * Ignore what are really parity errors that
                 * occur on the last REQ of a free running
                 * clock prior to going busfree.  Some drives
                 * do not properly active negate just before
                 * going busfree resulting in a parity glitch.
                 */
                ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0)
                        printk("%s: Parity on last REQ detected "
                               "during busfree phase.\n",
                               ahd_name(ahd));
#endif
                /* Return unpausing the sequencer. */
                return (0);
        }
        if (ahd->src_mode != AHD_MODE_SCSI) {
                u_int   scbid;
                struct  scb *scb;

                scbid = ahd_get_scbptr(ahd);
                scb = ahd_lookup_scb(ahd, scbid);
                ahd_print_path(ahd, scb);
                printk("Unexpected PKT busfree condition\n");
                ahd_dump_card_state(ahd);
                ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A',
                               SCB_GET_LUN(scb), SCB_GET_TAG(scb),
                               ROLE_INITIATOR, CAM_UNEXP_BUSFREE);

                /* Return restarting the sequencer. */
                return (1);
        }
        printk("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
        ahd_dump_card_state(ahd);
        /* Restart the sequencer. */
        return (1);
}

/*
 * Non-packetized unexpected or expected busfree.
 */
static int
ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
{
        struct  ahd_devinfo devinfo;
        struct  scb *scb;
        u_int   lastphase;
        u_int   saved_scsiid;
        u_int   saved_lun;
        u_int   target;
        u_int   initiator_role_id;
        u_int   scbid;
        u_int   ppr_busfree;
        int     printerror;

        /*
         * Look at what phase we were last in.  If its message out,
         * chances are pretty good that the busfree was in response
         * to one of our abort requests.
         */
        lastphase = ahd_inb(ahd, LASTPHASE);
        saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
        saved_lun = ahd_inb(ahd, SAVED_LUN);
        target = SCSIID_TARGET(ahd, saved_scsiid);
        initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
        ahd_compile_devinfo(&devinfo, initiator_role_id,
                            target, saved_lun, 'A', ROLE_INITIATOR);
        printerror = 1;

        scbid = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scbid);
        if (scb != NULL
         && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
                scb = NULL;

        ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0;
        if (lastphase == P_MESGOUT) {
                u_int tag;

                tag = SCB_LIST_NULL;
                if (ahd_sent_msg(ahd, AHDMSG_1B, ABORT_TASK, TRUE)
                 || ahd_sent_msg(ahd, AHDMSG_1B, ABORT_TASK_SET, TRUE)) {
                        int found;
                        int sent_msg;

                        if (scb == NULL) {
                                ahd_print_devinfo(ahd, &devinfo);
                                printk("Abort for unidentified "
                                       "connection completed.\n");
                                /* restart the sequencer. */
                                return (1);
                        }
                        sent_msg = ahd->msgout_buf[ahd->msgout_index - 1];
                        ahd_print_path(ahd, scb);
                        printk("SCB %d - Abort%s Completed.\n",
                               SCB_GET_TAG(scb),
                               sent_msg == ABORT_TASK ? "" : " Tag");

                        if (sent_msg == ABORT_TASK)
                                tag = SCB_GET_TAG(scb);

                        if ((scb->flags & SCB_EXTERNAL_RESET) != 0) {
                                /*
                                 * This abort is in response to an
                                 * unexpected switch to command phase
                                 * for a packetized connection.  Since
                                 * the identify message was never sent,
                                 * "saved lun" is 0.  We really want to
                                 * abort only the SCB that encountered
                                 * this error, which could have a different
                                 * lun.  The SCB will be retried so the OS
                                 * will see the UA after renegotiating to
                                 * packetized.
                                 */
                                tag = SCB_GET_TAG(scb);
                                saved_lun = scb->hscb->lun;
                        }
                        found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
                                               tag, ROLE_INITIATOR,
                                               CAM_REQ_ABORTED);
                        printk("found == 0x%x\n", found);
                        printerror = 0;
                } else if (ahd_sent_msg(ahd, AHDMSG_1B,
                                        TARGET_RESET, TRUE)) {
                        ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
                                            CAM_BDR_SENT, "Bus Device Reset",
                                            /*verbose_level*/0);
                        printerror = 0;
                } else if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_PPR, FALSE)
                        && ppr_busfree == 0) {
                        struct ahd_initiator_tinfo *tinfo;
                        struct ahd_tmode_tstate *tstate;

                        /*
                         * PPR Rejected.
                         *
                         * If the previous negotiation was packetized,
                         * this could be because the device has been
                         * reset without our knowledge.  Force our
                         * current negotiation to async and retry the
                         * negotiation.  Otherwise retry the command
                         * with non-ppr negotiation.
                         */
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("PPR negotiation rejected busfree.\n");
#endif
                        tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
                                                    devinfo.our_scsiid,
                                                    devinfo.target, &tstate);
                        if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
                                ahd_set_width(ahd, &devinfo,
                                              MSG_EXT_WDTR_BUS_8_BIT,
                                              AHD_TRANS_CUR,
                                              /*paused*/TRUE);
                                ahd_set_syncrate(ahd, &devinfo,
                                                /*period*/0, /*offset*/0,
                                                /*ppr_options*/0,
                                                AHD_TRANS_CUR,
                                                /*paused*/TRUE);
                                /*
                                 * The expect PPR busfree handler below
                                 * will effect the retry and necessary
                                 * abort.
                                 */
                        } else {
                                tinfo->curr.transport_version = 2;
                                tinfo->goal.transport_version = 2;
                                tinfo->goal.ppr_options = 0;
                                if (scb != NULL) {
                                        /*
                                         * Remove any SCBs in the waiting
                                         * for selection queue that may
                                         * also be for this target so that
                                         * command ordering is preserved.
                                         */
                                        ahd_freeze_devq(ahd, scb);
                                        ahd_qinfifo_requeue_tail(ahd, scb);
                                }
                                printerror = 0;
                        }
                } else if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_WDTR, FALSE)
                        && ppr_busfree == 0) {
                        /*
                         * Negotiation Rejected.  Go-narrow and
                         * retry command.
                         */
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("WDTR negotiation rejected busfree.\n");
#endif
                        ahd_set_width(ahd, &devinfo,
                                      MSG_EXT_WDTR_BUS_8_BIT,
                                      AHD_TRANS_CUR|AHD_TRANS_GOAL,
                                      /*paused*/TRUE);
                        if (scb != NULL) {
                                /*
                                 * Remove any SCBs in the waiting for
                                 * selection queue that may also be for
                                 * this target so that command ordering
                                 * is preserved.
                                 */
                                ahd_freeze_devq(ahd, scb);
                                ahd_qinfifo_requeue_tail(ahd, scb);
                        }
                        printerror = 0;
                } else if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_SDTR, FALSE)
                        && ppr_busfree == 0) {
                        /*
                         * Negotiation Rejected.  Go-async and
                         * retry command.
                         */
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("SDTR negotiation rejected busfree.\n");
#endif
                        ahd_set_syncrate(ahd, &devinfo,
                                        /*period*/0, /*offset*/0,
                                        /*ppr_options*/0,
                                        AHD_TRANS_CUR|AHD_TRANS_GOAL,
                                        /*paused*/TRUE);
                        if (scb != NULL) {
                                /*
                                 * Remove any SCBs in the waiting for
                                 * selection queue that may also be for
                                 * this target so that command ordering
                                 * is preserved.
                                 */
                                ahd_freeze_devq(ahd, scb);
                                ahd_qinfifo_requeue_tail(ahd, scb);
                        }
                        printerror = 0;
                } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
                        && ahd_sent_msg(ahd, AHDMSG_1B,
                                         INITIATOR_ERROR, TRUE)) {

#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("Expected IDE Busfree\n");
#endif
                        printerror = 0;
                } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE)
                        && ahd_sent_msg(ahd, AHDMSG_1B,
                                        MESSAGE_REJECT, TRUE)) {

#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("Expected QAS Reject Busfree\n");
#endif
                        printerror = 0;
                }
        }

        /*
         * The busfree required flag is honored at the end of
         * the message phases.  We check it last in case we
         * had to send some other message that caused a busfree.
         */
        if (scb != NULL && printerror != 0
         && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
         && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {

                ahd_freeze_devq(ahd, scb);
                ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
                ahd_freeze_scb(scb);
                if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) {
                        ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
                                       SCB_GET_CHANNEL(ahd, scb),
                                       SCB_GET_LUN(scb), SCB_LIST_NULL,
                                       ROLE_INITIATOR, CAM_REQ_ABORTED);
                } else {
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk("PPR Negotiation Busfree.\n");
#endif
                        ahd_done(ahd, scb);
                }
                printerror = 0;
        }
        if (printerror != 0) {
                int aborted;

                aborted = 0;
                if (scb != NULL) {
                        u_int tag;

                        if ((scb->hscb->control & TAG_ENB) != 0)
                                tag = SCB_GET_TAG(scb);
                        else
                                tag = SCB_LIST_NULL;
                        ahd_print_path(ahd, scb);
                        aborted = ahd_abort_scbs(ahd, target, 'A',
                                       SCB_GET_LUN(scb), tag,
                                       ROLE_INITIATOR,
                                       CAM_UNEXP_BUSFREE);
                } else {
                        /*
                         * We had not fully identified this connection,
                         * so we cannot abort anything.
                         */
                        printk("%s: ", ahd_name(ahd));
                }
                printk("Unexpected busfree %s, %d SCBs aborted, "
                       "PRGMCNT == 0x%x\n",
                       ahd_lookup_phase_entry(lastphase)->phasemsg,
                       aborted,
                       ahd_inw(ahd, PRGMCNT));
                ahd_dump_card_state(ahd);
                if (lastphase != P_BUSFREE)
                        ahd_force_renegotiation(ahd, &devinfo);
        }
        /* Always restart the sequencer. */
        return (1);
}

static void
ahd_handle_proto_violation(struct ahd_softc *ahd)
{
        struct  ahd_devinfo devinfo;
        struct  scb *scb;
        u_int   scbid;
        u_int   seq_flags;
        u_int   curphase;
        u_int   lastphase;
        int     found;

        ahd_fetch_devinfo(ahd, &devinfo);
        scbid = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scbid);
        seq_flags = ahd_inb(ahd, SEQ_FLAGS);
        curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
        lastphase = ahd_inb(ahd, LASTPHASE);
        if ((seq_flags & NOT_IDENTIFIED) != 0) {

                /*
                 * The reconnecting target either did not send an
                 * identify message, or did, but we didn't find an SCB
                 * to match.
                 */
                ahd_print_devinfo(ahd, &devinfo);
                printk("Target did not send an IDENTIFY message. "
                       "LASTPHASE = 0x%x.\n", lastphase);
                scb = NULL;
        } else if (scb == NULL) {
                /*
                 * We don't seem to have an SCB active for this
                 * transaction.  Print an error and reset the bus.
                 */
                ahd_print_devinfo(ahd, &devinfo);
                printk("No SCB found during protocol violation\n");
                goto proto_violation_reset;
        } else {
                ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
                if ((seq_flags & NO_CDB_SENT) != 0) {
                        ahd_print_path(ahd, scb);
                        printk("No or incomplete CDB sent to device.\n");
                } else if ((ahd_inb_scbram(ahd, SCB_CONTROL)
                          & STATUS_RCVD) == 0) {
                        /*
                         * The target never bothered to provide status to
                         * us prior to completing the command.  Since we don't
                         * know the disposition of this command, we must attempt
                         * to abort it.  Assert ATN and prepare to send an abort
                         * message.
                         */
                        ahd_print_path(ahd, scb);
                        printk("Completed command without status.\n");
                } else {
                        ahd_print_path(ahd, scb);
                        printk("Unknown protocol violation.\n");
                        ahd_dump_card_state(ahd);
                }
        }
        if ((lastphase & ~P_DATAIN_DT) == 0
         || lastphase == P_COMMAND) {
proto_violation_reset:
                /*
                 * Target either went directly to data
                 * phase or didn't respond to our ATN.
                 * The only safe thing to do is to blow
                 * it away with a bus reset.
                 */
                found = ahd_reset_channel(ahd, 'A', TRUE);
                printk("%s: Issued Channel %c Bus Reset. "
                       "%d SCBs aborted\n", ahd_name(ahd), 'A', found);
        } else {
                /*
                 * Leave the selection hardware off in case
                 * this abort attempt will affect yet to
                 * be sent commands.
                 */
                ahd_outb(ahd, SCSISEQ0,
                         ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
                ahd_assert_atn(ahd);
                ahd_outb(ahd, MSG_OUT, HOST_MSG);
                if (scb == NULL) {
                        ahd_print_devinfo(ahd, &devinfo);
                        ahd->msgout_buf[0] = ABORT_TASK;
                        ahd->msgout_len = 1;
                        ahd->msgout_index = 0;
                        ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
                } else {
                        ahd_print_path(ahd, scb);
                        scb->flags |= SCB_ABORT;
                }
                printk("Protocol violation %s.  Attempting to abort.\n",
                       ahd_lookup_phase_entry(curphase)->phasemsg);
        }
}

/*
 * Force renegotiation to occur the next time we initiate
 * a command to the current device.
 */
static void
ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        struct  ahd_initiator_tinfo *targ_info;
        struct  ahd_tmode_tstate *tstate;

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                ahd_print_devinfo(ahd, devinfo);
                printk("Forcing renegotiation\n");
        }
#endif
        targ_info = ahd_fetch_transinfo(ahd,
                                        devinfo->channel,
                                        devinfo->our_scsiid,
                                        devinfo->target,
                                        &tstate);
        ahd_update_neg_request(ahd, devinfo, tstate,
                               targ_info, AHD_NEG_IF_NON_ASYNC);
}

#define AHD_MAX_STEPS 2000
static void
ahd_clear_critical_section(struct ahd_softc *ahd)
{
        ahd_mode_state  saved_modes;
        int             stepping;
        int             steps;
        int             first_instr;
        u_int           simode0;
        u_int           simode1;
        u_int           simode3;
        u_int           lqimode0;
        u_int           lqimode1;
        u_int           lqomode0;
        u_int           lqomode1;

        if (ahd->num_critical_sections == 0)
                return;

        stepping = FALSE;
        steps = 0;
        first_instr = 0;
        simode0 = 0;
        simode1 = 0;
        simode3 = 0;
        lqimode0 = 0;
        lqimode1 = 0;
        lqomode0 = 0;
        lqomode1 = 0;
        saved_modes = ahd_save_modes(ahd);
        for (;;) {
                struct  cs *cs;
                u_int   seqaddr;
                u_int   i;

                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                seqaddr = ahd_inw(ahd, CURADDR);

                cs = ahd->critical_sections;
                for (i = 0; i < ahd->num_critical_sections; i++, cs++) {
                        if (cs->begin < seqaddr && cs->end >= seqaddr)
                                break;
                }

                if (i == ahd->num_critical_sections)
                        break;

                if (steps > AHD_MAX_STEPS) {
                        printk("%s: Infinite loop in critical section\n"
                               "%s: First Instruction 0x%x now 0x%x\n",
                               ahd_name(ahd), ahd_name(ahd), first_instr,
                               seqaddr);
                        ahd_dump_card_state(ahd);
                        panic("critical section loop");
                }

                steps++;
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MISC) != 0)
                        printk("%s: Single stepping at 0x%x\n", ahd_name(ahd),
                               seqaddr);
#endif
                if (stepping == FALSE) {

                        first_instr = seqaddr;
                        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                        simode0 = ahd_inb(ahd, SIMODE0);
                        simode3 = ahd_inb(ahd, SIMODE3);
                        lqimode0 = ahd_inb(ahd, LQIMODE0);
                        lqimode1 = ahd_inb(ahd, LQIMODE1);
                        lqomode0 = ahd_inb(ahd, LQOMODE0);
                        lqomode1 = ahd_inb(ahd, LQOMODE1);
                        ahd_outb(ahd, SIMODE0, 0);
                        ahd_outb(ahd, SIMODE3, 0);
                        ahd_outb(ahd, LQIMODE0, 0);
                        ahd_outb(ahd, LQIMODE1, 0);
                        ahd_outb(ahd, LQOMODE0, 0);
                        ahd_outb(ahd, LQOMODE1, 0);
                        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                        simode1 = ahd_inb(ahd, SIMODE1);
                        /*
                         * We don't clear ENBUSFREE.  Unfortunately
                         * we cannot re-enable busfree detection within
                         * the current connection, so we must leave it
                         * on while single stepping.
                         */
                        ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE);
                        ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP);
                        stepping = TRUE;
                }
                ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
                ahd_outb(ahd, CLRINT, CLRSCSIINT);
                ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
                ahd_outb(ahd, HCNTRL, ahd->unpause);
                while (!ahd_is_paused(ahd))
                        ahd_delay(200);
                ahd_update_modes(ahd);
        }
        if (stepping) {
                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                ahd_outb(ahd, SIMODE0, simode0);
                ahd_outb(ahd, SIMODE3, simode3);
                ahd_outb(ahd, LQIMODE0, lqimode0);
                ahd_outb(ahd, LQIMODE1, lqimode1);
                ahd_outb(ahd, LQOMODE0, lqomode0);
                ahd_outb(ahd, LQOMODE1, lqomode1);
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
                ahd_outb(ahd, SIMODE1, simode1);
                /*
                 * SCSIINT seems to glitch occasionally when
                 * the interrupt masks are restored.  Clear SCSIINT
                 * one more time so that only persistent errors
                 * are seen as a real interrupt.
                 */
                ahd_outb(ahd, CLRINT, CLRSCSIINT);
        }
        ahd_restore_modes(ahd, saved_modes);
}

/*
 * Clear any pending interrupt status.
 */
static void
ahd_clear_intstat(struct ahd_softc *ahd)
{
        AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                         ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
        /* Clear any interrupt conditions this may have caused */
        ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2
                                 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD);
        ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT
                                 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI
                                 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ);
        ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ
                                 |CLRLQOATNPKT|CLRLQOTCRC);
        ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS
                                 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT);
        if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
                ahd_outb(ahd, CLRLQOINT0, 0);
                ahd_outb(ahd, CLRLQOINT1, 0);
        }
        ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR);
        ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
                                |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT);
        ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO
                                |CLRIOERR|CLROVERRUN);
        ahd_outb(ahd, CLRINT, CLRSCSIINT);
}

/**************************** Debugging Routines ******************************/
#ifdef AHD_DEBUG
uint32_t ahd_debug = AHD_DEBUG_OPTS;
#endif

#if 0
void
ahd_print_scb(struct scb *scb)
{
        struct hardware_scb *hscb;
        int i;

        hscb = scb->hscb;
        printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
               (void *)scb,
               hscb->control,
               hscb->scsiid,
               hscb->lun,
               hscb->cdb_len);
        printk("Shared Data: ");
        for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++)
                printk("%#02x", hscb->shared_data.idata.cdb[i]);
        printk("        dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
               (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF),
               (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF),
               ahd_le32toh(hscb->datacnt),
               ahd_le32toh(hscb->sgptr),
               SCB_GET_TAG(scb));
        ahd_dump_sglist(scb);
}
#endif  /*  0  */

/************************* Transfer Negotiation *******************************/
/*
 * Allocate per target mode instance (ID we respond to as a target)
 * transfer negotiation data structures.
 */
static struct ahd_tmode_tstate *
ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel)
{
        struct ahd_tmode_tstate *master_tstate;
        struct ahd_tmode_tstate *tstate;
        int i;

        master_tstate = ahd->enabled_targets[ahd->our_id];
        if (ahd->enabled_targets[scsi_id] != NULL
         && ahd->enabled_targets[scsi_id] != master_tstate)
                panic("%s: ahd_alloc_tstate - Target already allocated",
                      ahd_name(ahd));
        tstate = kmalloc(sizeof(*tstate), GFP_ATOMIC);
        if (tstate == NULL)
                return (NULL);

        /*
         * If we have allocated a master tstate, copy user settings from
         * the master tstate (taken from SRAM or the EEPROM) for this
         * channel, but reset our current and goal settings to async/narrow
         * until an initiator talks to us.
         */
        if (master_tstate != NULL) {
                memcpy(tstate, master_tstate, sizeof(*tstate));
                memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
                for (i = 0; i < 16; i++) {
                        memset(&tstate->transinfo[i].curr, 0,
                              sizeof(tstate->transinfo[i].curr));
                        memset(&tstate->transinfo[i].goal, 0,
                              sizeof(tstate->transinfo[i].goal));
                }
        } else
                memset(tstate, 0, sizeof(*tstate));
        ahd->enabled_targets[scsi_id] = tstate;
        return (tstate);
}

#ifdef AHD_TARGET_MODE
/*
 * Free per target mode instance (ID we respond to as a target)
 * transfer negotiation data structures.
 */
static void
ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
{
        struct ahd_tmode_tstate *tstate;

        /*
         * Don't clean up our "master" tstate.
         * It has our default user settings.
         */
        if (scsi_id == ahd->our_id
         && force == FALSE)
                return;

        tstate = ahd->enabled_targets[scsi_id];
        kfree(tstate);
        ahd->enabled_targets[scsi_id] = NULL;
}
#endif

/*
 * Called when we have an active connection to a target on the bus,
 * this function finds the nearest period to the input period limited
 * by the capabilities of the bus connectivity of and sync settings for
 * the target.
 */
static void
ahd_devlimited_syncrate(struct ahd_softc *ahd,
                        struct ahd_initiator_tinfo *tinfo,
                        u_int *period, u_int *ppr_options, role_t role)
{
        struct  ahd_transinfo *transinfo;
        u_int   maxsync;

        if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0
         && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) {
                maxsync = AHD_SYNCRATE_PACED;
        } else {
                maxsync = AHD_SYNCRATE_ULTRA;
                /* Can't do DT related options on an SE bus */
                *ppr_options &= MSG_EXT_PPR_QAS_REQ;
        }
        /*
         * Never allow a value higher than our current goal
         * period otherwise we may allow a target initiated
         * negotiation to go above the limit as set by the
         * user.  In the case of an initiator initiated
         * sync negotiation, we limit based on the user
         * setting.  This allows the system to still accept
         * incoming negotiations even if target initiated
         * negotiation is not performed.
         */
        if (role == ROLE_TARGET)
                transinfo = &tinfo->user;
        else
                transinfo = &tinfo->goal;
        *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN);
        if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
                maxsync = max(maxsync, (u_int)AHD_SYNCRATE_ULTRA2);
                *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
        }
        if (transinfo->period == 0) {
                *period = 0;
                *ppr_options = 0;
        } else {
                *period = max(*period, (u_int)transinfo->period);
                ahd_find_syncrate(ahd, period, ppr_options, maxsync);
        }
}

/*
 * Look up the valid period to SCSIRATE conversion in our table.
 * Return the period and offset that should be sent to the target
 * if this was the beginning of an SDTR.
 */
void
ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
                  u_int *ppr_options, u_int maxsync)
{
        if (*period < maxsync)
                *period = maxsync;

        if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0
         && *period > AHD_SYNCRATE_MIN_DT)
                *ppr_options &= ~MSG_EXT_PPR_DT_REQ;

        if (*period > AHD_SYNCRATE_MIN)
                *period = 0;

        /* Honor PPR option conformance rules. */
        if (*period > AHD_SYNCRATE_PACED)
                *ppr_options &= ~MSG_EXT_PPR_RTI;

        if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
                *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ);

        if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0)
                *ppr_options &= MSG_EXT_PPR_QAS_REQ;

        /* Skip all PACED only entries if IU is not available */
        if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0
         && *period < AHD_SYNCRATE_DT)
                *period = AHD_SYNCRATE_DT;

        /* Skip all DT only entries if DT is not available */
        if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
         && *period < AHD_SYNCRATE_ULTRA2)
                *period = AHD_SYNCRATE_ULTRA2;
}

/*
 * Truncate the given synchronous offset to a value the
 * current adapter type and syncrate are capable of.
 */
static void
ahd_validate_offset(struct ahd_softc *ahd,
                    struct ahd_initiator_tinfo *tinfo,
                    u_int period, u_int *offset, int wide,
                    role_t role)
{
        u_int maxoffset;

        /* Limit offset to what we can do */
        if (period == 0)
                maxoffset = 0;
        else if (period <= AHD_SYNCRATE_PACED) {
                if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
                        maxoffset = MAX_OFFSET_PACED_BUG;
                else
                        maxoffset = MAX_OFFSET_PACED;
        } else
                maxoffset = MAX_OFFSET_NON_PACED;
        *offset = min(*offset, maxoffset);
        if (tinfo != NULL) {
                if (role == ROLE_TARGET)
                        *offset = min(*offset, (u_int)tinfo->user.offset);
                else
                        *offset = min(*offset, (u_int)tinfo->goal.offset);
        }
}

/*
 * Truncate the given transfer width parameter to a value the
 * current adapter type is capable of.
 */
static void
ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
                   u_int *bus_width, role_t role)
{
        switch (*bus_width) {
        default:
                if (ahd->features & AHD_WIDE) {
                        /* Respond Wide */
                        *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
                        break;
                }
                fallthrough;
        case MSG_EXT_WDTR_BUS_8_BIT:
                *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
                break;
        }
        if (tinfo != NULL) {
                if (role == ROLE_TARGET)
                        *bus_width = min((u_int)tinfo->user.width, *bus_width);
                else
                        *bus_width = min((u_int)tinfo->goal.width, *bus_width);
        }
}

/*
 * Update the bitmask of targets for which the controller should
 * negotiate with at the next convenient opportunity.  This currently
 * means the next time we send the initial identify messages for
 * a new transaction.
 */
int
ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                       struct ahd_tmode_tstate *tstate,
                       struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type)
{
        u_int auto_negotiate_orig;

        auto_negotiate_orig = tstate->auto_negotiate;
        if (neg_type == AHD_NEG_ALWAYS) {
                /*
                 * Force our "current" settings to be
                 * unknown so that unless a bus reset
                 * occurs the need to renegotiate is
                 * recorded persistently.
                 */
                if ((ahd->features & AHD_WIDE) != 0)
                        tinfo->curr.width = AHD_WIDTH_UNKNOWN;
                tinfo->curr.period = AHD_PERIOD_UNKNOWN;
                tinfo->curr.offset = AHD_OFFSET_UNKNOWN;
        }
        if (tinfo->curr.period != tinfo->goal.period
         || tinfo->curr.width != tinfo->goal.width
         || tinfo->curr.offset != tinfo->goal.offset
         || tinfo->curr.ppr_options != tinfo->goal.ppr_options
         || (neg_type == AHD_NEG_IF_NON_ASYNC
          && (tinfo->goal.offset != 0
           || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
           || tinfo->goal.ppr_options != 0)))
                tstate->auto_negotiate |= devinfo->target_mask;
        else
                tstate->auto_negotiate &= ~devinfo->target_mask;

        return (auto_negotiate_orig != tstate->auto_negotiate);
}

/*
 * Update the user/goal/curr tables of synchronous negotiation
 * parameters as well as, in the case of a current or active update,
 * any data structures on the host controller.  In the case of an
 * active update, the specified target is currently talking to us on
 * the bus, so the transfer parameter update must take effect
 * immediately.
 */
void
ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                 u_int period, u_int offset, u_int ppr_options,
                 u_int type, int paused)
{
        struct  ahd_initiator_tinfo *tinfo;
        struct  ahd_tmode_tstate *tstate;
        u_int   old_period;
        u_int   old_offset;
        u_int   old_ppr;
        int     active;
        int     update_needed;

        active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
        update_needed = 0;

        if (period == 0 || offset == 0) {
                period = 0;
                offset = 0;
        }

        tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
                                    devinfo->target, &tstate);

        if ((type & AHD_TRANS_USER) != 0) {
                tinfo->user.period = period;
                tinfo->user.offset = offset;
                tinfo->user.ppr_options = ppr_options;
        }

        if ((type & AHD_TRANS_GOAL) != 0) {
                tinfo->goal.period = period;
                tinfo->goal.offset = offset;
                tinfo->goal.ppr_options = ppr_options;
        }

        old_period = tinfo->curr.period;
        old_offset = tinfo->curr.offset;
        old_ppr    = tinfo->curr.ppr_options;

        if ((type & AHD_TRANS_CUR) != 0
         && (old_period != period
          || old_offset != offset
          || old_ppr != ppr_options)) {

                update_needed++;

                tinfo->curr.period = period;
                tinfo->curr.offset = offset;
                tinfo->curr.ppr_options = ppr_options;

                ahd_send_async(ahd, devinfo->channel, devinfo->target,
                               CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
                if (bootverbose) {
                        if (offset != 0) {
                                int options;

                                printk("%s: target %d synchronous with "
                                       "period = 0x%x, offset = 0x%x",
                                       ahd_name(ahd), devinfo->target,
                                       period, offset);
                                options = 0;
                                if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
                                        printk("(RDSTRM");
                                        options++;
                                }
                                if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
                                        printk("%s", options ? "|DT" : "(DT");
                                        options++;
                                }
                                if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
                                        printk("%s", options ? "|IU" : "(IU");
                                        options++;
                                }
                                if ((ppr_options & MSG_EXT_PPR_RTI) != 0) {
                                        printk("%s", options ? "|RTI" : "(RTI");
                                        options++;
                                }
                                if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
                                        printk("%s", options ? "|QAS" : "(QAS");
                                        options++;
                                }
                                if (options != 0)
                                        printk(")\n");
                                else
                                        printk("\n");
                        } else {
                                printk("%s: target %d using "
                                       "asynchronous transfers%s\n",
                                       ahd_name(ahd), devinfo->target,
                                       (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0
                                     ?  "(QAS)" : "");
                        }
                }
        }
        /*
         * Always refresh the neg-table to handle the case of the
         * sequencer setting the ENATNO bit for a MK_MESSAGE request.
         * We will always renegotiate in that case if this is a
         * packetized request.  Also manage the busfree expected flag
         * from this common routine so that we catch changes due to
         * WDTR or SDTR messages.
         */
        if ((type & AHD_TRANS_CUR) != 0) {
                if (!paused)
                        ahd_pause(ahd);
                ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
                if (!paused)
                        ahd_unpause(ahd);
                if (ahd->msg_type != MSG_TYPE_NONE) {
                        if ((old_ppr & MSG_EXT_PPR_IU_REQ)
                         != (ppr_options & MSG_EXT_PPR_IU_REQ)) {
#ifdef AHD_DEBUG
                                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                                        ahd_print_devinfo(ahd, devinfo);
                                        printk("Expecting IU Change busfree\n");
                                }
#endif
                                ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
                                               |  MSG_FLAG_IU_REQ_CHANGED;
                        }
                        if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) {
#ifdef AHD_DEBUG
                                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                        printk("PPR with IU_REQ outstanding\n");
#endif
                                ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE;
                        }
                }
        }

        update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
                                                tinfo, AHD_NEG_TO_GOAL);

        if (update_needed && active)
                ahd_update_pending_scbs(ahd);
}

/*
 * Update the user/goal/curr tables of wide negotiation
 * parameters as well as, in the case of a current or active update,
 * any data structures on the host controller.  In the case of an
 * active update, the specified target is currently talking to us on
 * the bus, so the transfer parameter update must take effect
 * immediately.
 */
void
ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
              u_int width, u_int type, int paused)
{
        struct  ahd_initiator_tinfo *tinfo;
        struct  ahd_tmode_tstate *tstate;
        u_int   oldwidth;
        int     active;
        int     update_needed;

        active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
        update_needed = 0;
        tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
                                    devinfo->target, &tstate);

        if ((type & AHD_TRANS_USER) != 0)
                tinfo->user.width = width;

        if ((type & AHD_TRANS_GOAL) != 0)
                tinfo->goal.width = width;

        oldwidth = tinfo->curr.width;
        if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) {

                update_needed++;

                tinfo->curr.width = width;
                ahd_send_async(ahd, devinfo->channel, devinfo->target,
                               CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
                if (bootverbose) {
                        printk("%s: target %d using %dbit transfers\n",
                               ahd_name(ahd), devinfo->target,
                               8 * (0x01 << width));
                }
        }

        if ((type & AHD_TRANS_CUR) != 0) {
                if (!paused)
                        ahd_pause(ahd);
                ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
                if (!paused)
                        ahd_unpause(ahd);
        }

        update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
                                                tinfo, AHD_NEG_TO_GOAL);
        if (update_needed && active)
                ahd_update_pending_scbs(ahd);

}

/*
 * Update the current state of tagged queuing for a given target.
 */
static void
ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd,
             struct ahd_devinfo *devinfo, ahd_queue_alg alg)
{
        struct scsi_device *sdev = cmd->device;

        ahd_platform_set_tags(ahd, sdev, devinfo, alg);
        ahd_send_async(ahd, devinfo->channel, devinfo->target,
                       devinfo->lun, AC_TRANSFER_NEG);
}

static void
ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                     struct ahd_transinfo *tinfo)
{
        ahd_mode_state  saved_modes;
        u_int           period;
        u_int           ppr_opts;
        u_int           con_opts;
        u_int           offset;
        u_int           saved_negoaddr;
        uint8_t         iocell_opts[sizeof(ahd->iocell_opts)];

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        saved_negoaddr = ahd_inb(ahd, NEGOADDR);
        ahd_outb(ahd, NEGOADDR, devinfo->target);
        period = tinfo->period;
        offset = tinfo->offset;
        memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts));
        ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ
                                        |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI);
        con_opts = 0;
        if (period == 0)
                period = AHD_SYNCRATE_ASYNC;
        if (period == AHD_SYNCRATE_160) {

                if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
                        /*
                         * When the SPI4 spec was finalized, PACE transfers
                         * was not made a configurable option in the PPR
                         * message.  Instead it is assumed to be enabled for
                         * any syncrate faster than 80MHz.  Nevertheless,
                         * Harpoon2A4 allows this to be configurable.
                         *
                         * Harpoon2A4 also assumes at most 2 data bytes per
                         * negotiated REQ/ACK offset.  Paced transfers take
                         * 4, so we must adjust our offset.
                         */
                        ppr_opts |= PPROPT_PACE;
                        offset *= 2;

                        /*
                         * Harpoon2A assumed that there would be a
                         * fallback rate between 160MHz and 80MHz,
                         * so 7 is used as the period factor rather
                         * than 8 for 160MHz.
                         */
                        period = AHD_SYNCRATE_REVA_160;
                }
                if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0)
                        iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
                            ~AHD_PRECOMP_MASK;
        } else {
                /*
                 * Precomp should be disabled for non-paced transfers.
                 */
                iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK;

                if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0
                 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0
                 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) {
                        /*
                         * Slow down our CRC interval to be
                         * compatible with non-packetized
                         * U160 devices that can't handle a
                         * CRC at full speed.
                         */
                        con_opts |= ENSLOWCRC;
                }

                if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
                        /*
                         * On H2A4, revert to a slower slewrate
                         * on non-paced transfers.
                         */
                        iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
                            ~AHD_SLEWRATE_MASK;
                }
        }

        ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW);
        ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]);
        ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE);
        ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]);

        ahd_outb(ahd, NEGPERIOD, period);
        ahd_outb(ahd, NEGPPROPTS, ppr_opts);
        ahd_outb(ahd, NEGOFFSET, offset);

        if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT)
                con_opts |= WIDEXFER;

        /*
         * Slow down our CRC interval to be
         * compatible with packetized U320 devices
         * that can't handle a CRC at full speed
         */
        if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
                con_opts |= ENSLOWCRC;
        }

        /*
         * During packetized transfers, the target will
         * give us the opportunity to send command packets
         * without us asserting attention.
         */
        if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
                con_opts |= ENAUTOATNO;
        ahd_outb(ahd, NEGCONOPTS, con_opts);
        ahd_outb(ahd, NEGOADDR, saved_negoaddr);
        ahd_restore_modes(ahd, saved_modes);
}

/*
 * When the transfer settings for a connection change, setup for
 * negotiation in pending SCBs to effect the change as quickly as
 * possible.  We also cancel any negotiations that are scheduled
 * for inflight SCBs that have not been started yet.
 */
static void
ahd_update_pending_scbs(struct ahd_softc *ahd)
{
        struct          scb *pending_scb;
        int             pending_scb_count;
        int             paused;
        u_int           saved_scbptr;
        ahd_mode_state  saved_modes;

        /*
         * Traverse the pending SCB list and ensure that all of the
         * SCBs there have the proper settings.  We can only safely
         * clear the negotiation required flag (setting requires the
         * execution queue to be modified) and this is only possible
         * if we are not already attempting to select out for this
         * SCB.  For this reason, all callers only call this routine
         * if we are changing the negotiation settings for the currently
         * active transaction on the bus.
         */
        pending_scb_count = 0;
        LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
                struct ahd_devinfo devinfo;
                struct ahd_tmode_tstate *tstate;

                ahd_scb_devinfo(ahd, &devinfo, pending_scb);
                ahd_fetch_transinfo(ahd, devinfo.channel, devinfo.our_scsiid,
                                    devinfo.target, &tstate);
                if ((tstate->auto_negotiate & devinfo.target_mask) == 0
                 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
                        pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
                        pending_scb->hscb->control &= ~MK_MESSAGE;
                }
                ahd_sync_scb(ahd, pending_scb,
                             BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
                pending_scb_count++;
        }

        if (pending_scb_count == 0)
                return;

        if (ahd_is_paused(ahd)) {
                paused = 1;
        } else {
                paused = 0;
                ahd_pause(ahd);
        }

        /*
         * Force the sequencer to reinitialize the selection for
         * the command at the head of the execution queue if it
         * has already been setup.  The negotiation changes may
         * effect whether we select-out with ATN.  It is only
         * safe to clear ENSELO when the bus is not free and no
         * selection is in progres or completed.
         */
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0
         && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0)
                ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
        saved_scbptr = ahd_get_scbptr(ahd);
        /* Ensure that the hscbs down on the card match the new information */
        LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
                u_int   scb_tag;
                u_int   control;

                scb_tag = SCB_GET_TAG(pending_scb);
                ahd_set_scbptr(ahd, scb_tag);
                control = ahd_inb_scbram(ahd, SCB_CONTROL);
                control &= ~MK_MESSAGE;
                control |= pending_scb->hscb->control & MK_MESSAGE;
                ahd_outb(ahd, SCB_CONTROL, control);
        }
        ahd_set_scbptr(ahd, saved_scbptr);
        ahd_restore_modes(ahd, saved_modes);

        if (paused == 0)
                ahd_unpause(ahd);
}

/**************************** Pathing Information *****************************/
static void
ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        ahd_mode_state  saved_modes;
        u_int           saved_scsiid;
        role_t          role;
        int             our_id;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        if (ahd_inb(ahd, SSTAT0) & TARGET)
                role = ROLE_TARGET;
        else
                role = ROLE_INITIATOR;

        if (role == ROLE_TARGET
         && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
                /* We were selected, so pull our id from TARGIDIN */
                our_id = ahd_inb(ahd, TARGIDIN) & OID;
        } else if (role == ROLE_TARGET)
                our_id = ahd_inb(ahd, TOWNID);
        else
                our_id = ahd_inb(ahd, IOWNID);

        saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
        ahd_compile_devinfo(devinfo,
                            our_id,
                            SCSIID_TARGET(ahd, saved_scsiid),
                            ahd_inb(ahd, SAVED_LUN),
                            SCSIID_CHANNEL(ahd, saved_scsiid),
                            role);
        ahd_restore_modes(ahd, saved_modes);
}

void
ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        printk("%s:%c:%d:%d: ", ahd_name(ahd), 'A',
               devinfo->target, devinfo->lun);
}

static const struct ahd_phase_table_entry*
ahd_lookup_phase_entry(int phase)
{
        const struct ahd_phase_table_entry *entry;
        const struct ahd_phase_table_entry *last_entry;

        /*
         * num_phases doesn't include the default entry which
         * will be returned if the phase doesn't match.
         */
        last_entry = &ahd_phase_table[num_phases];
        for (entry = ahd_phase_table; entry < last_entry; entry++) {
                if (phase == entry->phase)
                        break;
        }
        return (entry);
}

void
ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target,
                    u_int lun, char channel, role_t role)
{
        devinfo->our_scsiid = our_id;
        devinfo->target = target;
        devinfo->lun = lun;
        devinfo->target_offset = target;
        devinfo->channel = channel;
        devinfo->role = role;
        if (channel == 'B')
                devinfo->target_offset += 8;
        devinfo->target_mask = (0x01 << devinfo->target_offset);
}

static void
ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                struct scb *scb)
{
        role_t  role;
        int     our_id;

        our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
        role = ROLE_INITIATOR;
        if ((scb->hscb->control & TARGET_SCB) != 0)
                role = ROLE_TARGET;
        ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb),
                            SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role);
}


/************************ Message Phase Processing ****************************/
/*
 * When an initiator transaction with the MK_MESSAGE flag either reconnects
 * or enters the initial message out phase, we are interrupted.  Fill our
 * outgoing message buffer with the appropriate message and beging handing
 * the message phase(s) manually.
 */
static void
ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                           struct scb *scb)
{
        /*
         * To facilitate adding multiple messages together,
         * each routine should increment the index and len
         * variables instead of setting them explicitly.
         */
        ahd->msgout_index = 0;
        ahd->msgout_len = 0;

        if (ahd_currently_packetized(ahd))
                ahd->msg_flags |= MSG_FLAG_PACKETIZED;

        if (ahd->send_msg_perror
         && ahd_inb(ahd, MSG_OUT) == HOST_MSG) {
                ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror;
                ahd->msgout_len++;
                ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                        printk("Setting up for Parity Error delivery\n");
#endif
                return;
        } else if (scb == NULL) {
                printk("%s: WARNING. No pending message for "
                       "I_T msgin.  Issuing NO-OP\n", ahd_name(ahd));
                ahd->msgout_buf[ahd->msgout_index++] = NOP;
                ahd->msgout_len++;
                ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
                return;
        }

        if ((scb->flags & SCB_DEVICE_RESET) == 0
         && (scb->flags & SCB_PACKETIZED) == 0
         && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) {
                u_int identify_msg;

                identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
                if ((scb->hscb->control & DISCENB) != 0)
                        identify_msg |= MSG_IDENTIFY_DISCFLAG;
                ahd->msgout_buf[ahd->msgout_index++] = identify_msg;
                ahd->msgout_len++;

                if ((scb->hscb->control & TAG_ENB) != 0) {
                        ahd->msgout_buf[ahd->msgout_index++] =
                            scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
                        ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb);
                        ahd->msgout_len += 2;
                }
        }

        if (scb->flags & SCB_DEVICE_RESET) {
                ahd->msgout_buf[ahd->msgout_index++] = TARGET_RESET;
                ahd->msgout_len++;
                ahd_print_path(ahd, scb);
                printk("Bus Device Reset Message Sent\n");
                /*
                 * Clear our selection hardware in advance of
                 * the busfree.  We may have an entry in the waiting
                 * Q for this target, and we don't want to go about
                 * selecting while we handle the busfree and blow it
                 * away.
                 */
                ahd_outb(ahd, SCSISEQ0, 0);
        } else if ((scb->flags & SCB_ABORT) != 0) {

                if ((scb->hscb->control & TAG_ENB) != 0) {
                        ahd->msgout_buf[ahd->msgout_index++] = ABORT_TASK;
                } else {
                        ahd->msgout_buf[ahd->msgout_index++] = ABORT_TASK_SET;
                }
                ahd->msgout_len++;
                ahd_print_path(ahd, scb);
                printk("Abort%s Message Sent\n",
                       (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
                /*
                 * Clear our selection hardware in advance of
                 * the busfree.  We may have an entry in the waiting
                 * Q for this target, and we don't want to go about
                 * selecting while we handle the busfree and blow it
                 * away.
                 */
                ahd_outb(ahd, SCSISEQ0, 0);
        } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
                ahd_build_transfer_msg(ahd, devinfo);
                /*
                 * Clear our selection hardware in advance of potential
                 * PPR IU status change busfree.  We may have an entry in
                 * the waiting Q for this target, and we don't want to go
                 * about selecting while we handle the busfree and blow
                 * it away.
                 */
                ahd_outb(ahd, SCSISEQ0, 0);
        } else {
                printk("ahd_intr: AWAITING_MSG for an SCB that "
                       "does not have a waiting message\n");
                printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
                       devinfo->target_mask);
                panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x "
                      "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control,
                      ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT),
                      scb->flags);
        }

        /*
         * Clear the MK_MESSAGE flag from the SCB so we aren't
         * asked to send this message again.
         */
        ahd_outb(ahd, SCB_CONTROL,
                 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
        scb->hscb->control &= ~MK_MESSAGE;
        ahd->msgout_index = 0;
        ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
}

/*
 * Build an appropriate transfer negotiation message for the
 * currently active target.
 */
static void
ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        /*
         * We need to initiate transfer negotiations.
         * If our current and goal settings are identical,
         * we want to renegotiate due to a check condition.
         */
        struct  ahd_initiator_tinfo *tinfo;
        struct  ahd_tmode_tstate *tstate;
        int     dowide;
        int     dosync;
        int     doppr;
        u_int   period;
        u_int   ppr_options;
        u_int   offset;

        tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
                                    devinfo->target, &tstate);
        /*
         * Filter our period based on the current connection.
         * If we can't perform DT transfers on this segment (not in LVD
         * mode for instance), then our decision to issue a PPR message
         * may change.
         */
        period = tinfo->goal.period;
        offset = tinfo->goal.offset;
        ppr_options = tinfo->goal.ppr_options;
        /* Target initiated PPR is not allowed in the SCSI spec */
        if (devinfo->role == ROLE_TARGET)
                ppr_options = 0;
        ahd_devlimited_syncrate(ahd, tinfo, &period,
                                &ppr_options, devinfo->role);
        dowide = tinfo->curr.width != tinfo->goal.width;
        dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
        /*
         * Only use PPR if we have options that need it, even if the device
         * claims to support it.  There might be an expander in the way
         * that doesn't.
         */
        doppr = ppr_options != 0;

        if (!dowide && !dosync && !doppr) {
                dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
                dosync = tinfo->goal.offset != 0;
        }

        if (!dowide && !dosync && !doppr) {
                /*
                 * Force async with a WDTR message if we have a wide bus,
                 * or just issue an SDTR with a 0 offset.
                 */
                if ((ahd->features & AHD_WIDE) != 0)
                        dowide = 1;
                else
                        dosync = 1;

                if (bootverbose) {
                        ahd_print_devinfo(ahd, devinfo);
                        printk("Ensuring async\n");
                }
        }
        /* Target initiated PPR is not allowed in the SCSI spec */
        if (devinfo->role == ROLE_TARGET)
                doppr = 0;

        /*
         * Both the PPR message and SDTR message require the
         * goal syncrate to be limited to what the target device
         * is capable of handling (based on whether an LVD->SE
         * expander is on the bus), so combine these two cases.
         * Regardless, guarantee that if we are using WDTR and SDTR
         * messages that WDTR comes first.
         */
        if (doppr || (dosync && !dowide)) {

                offset = tinfo->goal.offset;
                ahd_validate_offset(ahd, tinfo, period, &offset,
                                    doppr ? tinfo->goal.width
                                          : tinfo->curr.width,
                                    devinfo->role);
                if (doppr) {
                        ahd_construct_ppr(ahd, devinfo, period, offset,
                                          tinfo->goal.width, ppr_options);
                } else {
                        ahd_construct_sdtr(ahd, devinfo, period, offset);
                }
        } else {
                ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width);
        }
}

/*
 * Build a synchronous negotiation message in our message
 * buffer based on the input parameters.
 */
static void
ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                   u_int period, u_int offset)
{
        if (offset == 0)
                period = AHD_ASYNC_XFER_PERIOD;
        ahd->msgout_index += spi_populate_sync_msg(
                        ahd->msgout_buf + ahd->msgout_index, period, offset);
        ahd->msgout_len += 5;
        if (bootverbose) {
                printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
                       ahd_name(ahd), devinfo->channel, devinfo->target,
                       devinfo->lun, period, offset);
        }
}

/*
 * Build a wide negotiateion message in our message
 * buffer based on the input parameters.
 */
static void
ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                   u_int bus_width)
{
        ahd->msgout_index += spi_populate_width_msg(
                        ahd->msgout_buf + ahd->msgout_index, bus_width);
        ahd->msgout_len += 4;
        if (bootverbose) {
                printk("(%s:%c:%d:%d): Sending WDTR %x\n",
                       ahd_name(ahd), devinfo->channel, devinfo->target,
                       devinfo->lun, bus_width);
        }
}

/*
 * Build a parallel protocol request message in our message
 * buffer based on the input parameters.
 */
static void
ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                  u_int period, u_int offset, u_int bus_width,
                  u_int ppr_options)
{
        /*
         * Always request precompensation from
         * the other target if we are running
         * at paced syncrates.
         */
        if (period <= AHD_SYNCRATE_PACED)
                ppr_options |= MSG_EXT_PPR_PCOMP_EN;
        if (offset == 0)
                period = AHD_ASYNC_XFER_PERIOD;
        ahd->msgout_index += spi_populate_ppr_msg(
                        ahd->msgout_buf + ahd->msgout_index, period, offset,
                        bus_width, ppr_options);
        ahd->msgout_len += 8;
        if (bootverbose) {
                printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
                       "offset %x, ppr_options %x\n", ahd_name(ahd),
                       devinfo->channel, devinfo->target, devinfo->lun,
                       bus_width, period, offset, ppr_options);
        }
}

/*
 * Clear any active message state.
 */
static void
ahd_clear_msg_state(struct ahd_softc *ahd)
{
        ahd_mode_state saved_modes;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        ahd->send_msg_perror = 0;
        ahd->msg_flags = MSG_FLAG_NONE;
        ahd->msgout_len = 0;
        ahd->msgin_index = 0;
        ahd->msg_type = MSG_TYPE_NONE;
        if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
                /*
                 * The target didn't care to respond to our
                 * message request, so clear ATN.
                 */
                ahd_outb(ahd, CLRSINT1, CLRATNO);
        }
        ahd_outb(ahd, MSG_OUT, NOP);
        ahd_outb(ahd, SEQ_FLAGS2,
                 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
        ahd_restore_modes(ahd, saved_modes);
}

/*
 * Manual message loop handler.
 */
static void
ahd_handle_message_phase(struct ahd_softc *ahd)
{
        struct  ahd_devinfo devinfo;
        u_int   bus_phase;
        int     end_session;

        ahd_fetch_devinfo(ahd, &devinfo);
        end_session = FALSE;
        bus_phase = ahd_inb(ahd, LASTPHASE);

        if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) {
                printk("LQIRETRY for LQIPHASE_OUTPKT\n");
                ahd_outb(ahd, LQCTL2, LQIRETRY);
        }
reswitch:
        switch (ahd->msg_type) {
        case MSG_TYPE_INITIATOR_MSGOUT:
        {
                int lastbyte;
                int phasemis;
                int msgdone;

                if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0)
                        panic("HOST_MSG_LOOP interrupt with no active message");

#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                        ahd_print_devinfo(ahd, &devinfo);
                        printk("INITIATOR_MSG_OUT");
                }
#endif
                phasemis = bus_phase != P_MESGOUT;
                if (phasemis) {
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                                printk(" PHASEMIS %s\n",
                                       ahd_lookup_phase_entry(bus_phase)
                                                             ->phasemsg);
                        }
#endif
                        if (bus_phase == P_MESGIN) {
                                /*
                                 * Change gears and see if
                                 * this messages is of interest to
                                 * us or should be passed back to
                                 * the sequencer.
                                 */
                                ahd_outb(ahd, CLRSINT1, CLRATNO);
                                ahd->send_msg_perror = 0;
                                ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN;
                                ahd->msgin_index = 0;
                                goto reswitch;
                        }
                        end_session = TRUE;
                        break;
                }

                if (ahd->send_msg_perror) {
                        ahd_outb(ahd, CLRSINT1, CLRATNO);
                        ahd_outb(ahd, CLRSINT1, CLRREQINIT);
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                                printk(" byte 0x%x\n", ahd->send_msg_perror);
#endif
                        /*
                         * If we are notifying the target of a CRC error
                         * during packetized operations, the target is
                         * within its rights to acknowledge our message
                         * with a busfree.
                         */
                        if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0
                         && ahd->send_msg_perror == INITIATOR_ERROR)
                                ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE;

                        ahd_outb(ahd, RETURN_2, ahd->send_msg_perror);
                        ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
                        break;
                }

                msgdone = ahd->msgout_index == ahd->msgout_len;
                if (msgdone) {
                        /*
                         * The target has requested a retry.
                         * Re-assert ATN, reset our message index to
                         * 0, and try again.
                         */
                        ahd->msgout_index = 0;
                        ahd_assert_atn(ahd);
                }

                lastbyte = ahd->msgout_index == (ahd->msgout_len - 1);
                if (lastbyte) {
                        /* Last byte is signified by dropping ATN */
                        ahd_outb(ahd, CLRSINT1, CLRATNO);
                }

                /*
                 * Clear our interrupt status and present
                 * the next byte on the bus.
                 */
                ahd_outb(ahd, CLRSINT1, CLRREQINIT);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                        printk(" byte 0x%x\n",
                               ahd->msgout_buf[ahd->msgout_index]);
#endif
                ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]);
                ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
                break;
        }
        case MSG_TYPE_INITIATOR_MSGIN:
        {
                int phasemis;
                int message_done;

#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                        ahd_print_devinfo(ahd, &devinfo);
                        printk("INITIATOR_MSG_IN");
                }
#endif
                phasemis = bus_phase != P_MESGIN;
                if (phasemis) {
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                                printk(" PHASEMIS %s\n",
                                       ahd_lookup_phase_entry(bus_phase)
                                                             ->phasemsg);
                        }
#endif
                        ahd->msgin_index = 0;
                        if (bus_phase == P_MESGOUT
                         && (ahd->send_msg_perror != 0
                          || (ahd->msgout_len != 0
                           && ahd->msgout_index == 0))) {
                                ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
                                goto reswitch;
                        }
                        end_session = TRUE;
                        break;
                }

                /* Pull the byte in without acking it */
                ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                        printk(" byte 0x%x\n",
                               ahd->msgin_buf[ahd->msgin_index]);
#endif

                message_done = ahd_parse_msg(ahd, &devinfo);

                if (message_done) {
                        /*
                         * Clear our incoming message buffer in case there
                         * is another message following this one.
                         */
                        ahd->msgin_index = 0;

                        /*
                         * If this message illicited a response,
                         * assert ATN so the target takes us to the
                         * message out phase.
                         */
                        if (ahd->msgout_len != 0) {
#ifdef AHD_DEBUG
                                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
                                        ahd_print_devinfo(ahd, &devinfo);
                                        printk("Asserting ATN for response\n");
                                }
#endif
                                ahd_assert_atn(ahd);
                        }
                } else
                        ahd->msgin_index++;

                if (message_done == MSGLOOP_TERMINATED) {
                        end_session = TRUE;
                } else {
                        /* Ack the byte */
                        ahd_outb(ahd, CLRSINT1, CLRREQINIT);
                        ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ);
                }
                break;
        }
        case MSG_TYPE_TARGET_MSGIN:
        {
                int msgdone;
                int msgout_request;

                /*
                 * By default, the message loop will continue.
                 */
                ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);

                if (ahd->msgout_len == 0)
                        panic("Target MSGIN with no active message");

                /*
                 * If we interrupted a mesgout session, the initiator
                 * will not know this until our first REQ.  So, we
                 * only honor mesgout requests after we've sent our
                 * first byte.
                 */
                if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0
                 && ahd->msgout_index > 0)
                        msgout_request = TRUE;
                else
                        msgout_request = FALSE;

                if (msgout_request) {

                        /*
                         * Change gears and see if
                         * this messages is of interest to
                         * us or should be passed back to
                         * the sequencer.
                         */
                        ahd->msg_type = MSG_TYPE_TARGET_MSGOUT;
                        ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO);
                        ahd->msgin_index = 0;
                        /* Dummy read to REQ for first byte */
                        ahd_inb(ahd, SCSIDAT);
                        ahd_outb(ahd, SXFRCTL0,
                                 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
                        break;
                }

                msgdone = ahd->msgout_index == ahd->msgout_len;
                if (msgdone) {
                        ahd_outb(ahd, SXFRCTL0,
                                 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
                        end_session = TRUE;
                        break;
                }

                /*
                 * Present the next byte on the bus.
                 */
                ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN);
                ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]);
                break;
        }
        case MSG_TYPE_TARGET_MSGOUT:
        {
                int lastbyte;
                int msgdone;

                /*
                 * By default, the message loop will continue.
                 */
                ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);

                /*
                 * The initiator signals that this is
                 * the last byte by dropping ATN.
                 */
                lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0;

                /*
                 * Read the latched byte, but turn off SPIOEN first
                 * so that we don't inadvertently cause a REQ for the
                 * next byte.
                 */
                ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
                ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT);
                msgdone = ahd_parse_msg(ahd, &devinfo);
                if (msgdone == MSGLOOP_TERMINATED) {
                        /*
                         * The message is *really* done in that it caused
                         * us to go to bus free.  The sequencer has already
                         * been reset at this point, so pull the ejection
                         * handle.
                         */
                        return;
                }

                ahd->msgin_index++;

                /*
                 * XXX Read spec about initiator dropping ATN too soon
                 *     and use msgdone to detect it.
                 */
                if (msgdone == MSGLOOP_MSGCOMPLETE) {
                        ahd->msgin_index = 0;

                        /*
                         * If this message illicited a response, transition
                         * to the Message in phase and send it.
                         */
                        if (ahd->msgout_len != 0) {
                                ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO);
                                ahd_outb(ahd, SXFRCTL0,
                                         ahd_inb(ahd, SXFRCTL0) | SPIOEN);
                                ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
                                ahd->msgin_index = 0;
                                break;
                        }
                }

                if (lastbyte)
                        end_session = TRUE;
                else {
                        /* Ask for the next byte. */
                        ahd_outb(ahd, SXFRCTL0,
                                 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
                }

                break;
        }
        default:
                panic("Unknown REQINIT message type");
        }

        if (end_session) {
                if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) {
                        printk("%s: Returning to Idle Loop\n",
                               ahd_name(ahd));
                        ahd_clear_msg_state(ahd);

                        /*
                         * Perform the equivalent of a clear_target_state.
                         */
                        ahd_outb(ahd, LASTPHASE, P_BUSFREE);
                        ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT);
                        ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
                } else {
                        ahd_clear_msg_state(ahd);
                        ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP);
                }
        }
}

/*
 * See if we sent a particular extended message to the target.
 * If "full" is true, return true only if the target saw the full
 * message.  If "full" is false, return true if the target saw at
 * least the first byte of the message.
 */
static int
ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full)
{
        int found;
        u_int index;

        found = FALSE;
        index = 0;

        while (index < ahd->msgout_len) {
                if (ahd->msgout_buf[index] == EXTENDED_MESSAGE) {
                        u_int end_index;

                        end_index = index + 1 + ahd->msgout_buf[index + 1];
                        if (ahd->msgout_buf[index+2] == msgval
                         && type == AHDMSG_EXT) {

                                if (full) {
                                        if (ahd->msgout_index > end_index)
                                                found = TRUE;
                                } else if (ahd->msgout_index > index)
                                        found = TRUE;
                        }
                        index = end_index;
                } else if (ahd->msgout_buf[index] >= SIMPLE_QUEUE_TAG
                        && ahd->msgout_buf[index] <= IGNORE_WIDE_RESIDUE) {

                        /* Skip tag type and tag id or residue param*/
                        index += 2;
                } else {
                        /* Single byte message */
                        if (type == AHDMSG_1B
                         && ahd->msgout_index > index
                         && (ahd->msgout_buf[index] == msgval
                          || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0
                           && msgval == MSG_IDENTIFYFLAG)))
                                found = TRUE;
                        index++;
                }

                if (found)
                        break;
        }
        return (found);
}

/*
 * Wait for a complete incoming message, parse it, and respond accordingly.
 */
static int
ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        struct  ahd_initiator_tinfo *tinfo;
        struct  ahd_tmode_tstate *tstate;
        int     reject;
        int     done;
        int     response;

        done = MSGLOOP_IN_PROG;
        response = FALSE;
        reject = FALSE;
        tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
                                    devinfo->target, &tstate);

        /*
         * Parse as much of the message as is available,
         * rejecting it if we don't support it.  When
         * the entire message is available and has been
         * handled, return MSGLOOP_MSGCOMPLETE, indicating
         * that we have parsed an entire message.
         *
         * In the case of extended messages, we accept the length
         * byte outright and perform more checking once we know the
         * extended message type.
         */
        switch (ahd->msgin_buf[0]) {
        case DISCONNECT:
        case SAVE_POINTERS:
        case COMMAND_COMPLETE:
        case RESTORE_POINTERS:
        case IGNORE_WIDE_RESIDUE:
                /*
                 * End our message loop as these are messages
                 * the sequencer handles on its own.
                 */
                done = MSGLOOP_TERMINATED;
                break;
        case MESSAGE_REJECT:
                response = ahd_handle_msg_reject(ahd, devinfo);
                fallthrough;
        case NOP:
                done = MSGLOOP_MSGCOMPLETE;
                break;
        case EXTENDED_MESSAGE:
        {
                /* Wait for enough of the message to begin validation */
                if (ahd->msgin_index < 2)
                        break;
                switch (ahd->msgin_buf[2]) {
                case EXTENDED_SDTR:
                {
                        u_int    period;
                        u_int    ppr_options;
                        u_int    offset;
                        u_int    saved_offset;

                        if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
                                reject = TRUE;
                                break;
                        }

                        /*
                         * Wait until we have both args before validating
                         * and acting on this message.
                         *
                         * Add one to MSG_EXT_SDTR_LEN to account for
                         * the extended message preamble.
                         */
                        if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1))
                                break;

                        period = ahd->msgin_buf[3];
                        ppr_options = 0;
                        saved_offset = offset = ahd->msgin_buf[4];
                        ahd_devlimited_syncrate(ahd, tinfo, &period,
                                                &ppr_options, devinfo->role);
                        ahd_validate_offset(ahd, tinfo, period, &offset,
                                            tinfo->curr.width, devinfo->role);
                        if (bootverbose) {
                                printk("(%s:%c:%d:%d): Received "
                                       "SDTR period %x, offset %x\n\t"
                                       "Filtered to period %x, offset %x\n",
                                       ahd_name(ahd), devinfo->channel,
                                       devinfo->target, devinfo->lun,
                                       ahd->msgin_buf[3], saved_offset,
                                       period, offset);
                        }
                        ahd_set_syncrate(ahd, devinfo, period,
                                         offset, ppr_options,
                                         AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                                         /*paused*/TRUE);

                        /*
                         * See if we initiated Sync Negotiation
                         * and didn't have to fall down to async
                         * transfers.
                         */
                        if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_SDTR, TRUE)) {
                                /* We started it */
                                if (saved_offset != offset) {
                                        /* Went too low - force async */
                                        reject = TRUE;
                                }
                        } else {
                                /*
                                 * Send our own SDTR in reply
                                 */
                                if (bootverbose
                                 && devinfo->role == ROLE_INITIATOR) {
                                        printk("(%s:%c:%d:%d): Target "
                                               "Initiated SDTR\n",
                                               ahd_name(ahd), devinfo->channel,
                                               devinfo->target, devinfo->lun);
                                }
                                ahd->msgout_index = 0;
                                ahd->msgout_len = 0;
                                ahd_construct_sdtr(ahd, devinfo,
                                                   period, offset);
                                ahd->msgout_index = 0;
                                response = TRUE;
                        }
                        done = MSGLOOP_MSGCOMPLETE;
                        break;
                }
                case EXTENDED_WDTR:
                {
                        u_int bus_width;
                        u_int saved_width;
                        u_int sending_reply;

                        sending_reply = FALSE;
                        if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
                                reject = TRUE;
                                break;
                        }

                        /*
                         * Wait until we have our arg before validating
                         * and acting on this message.
                         *
                         * Add one to MSG_EXT_WDTR_LEN to account for
                         * the extended message preamble.
                         */
                        if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1))
                                break;

                        bus_width = ahd->msgin_buf[3];
                        saved_width = bus_width;
                        ahd_validate_width(ahd, tinfo, &bus_width,
                                           devinfo->role);
                        if (bootverbose) {
                                printk("(%s:%c:%d:%d): Received WDTR "
                                       "%x filtered to %x\n",
                                       ahd_name(ahd), devinfo->channel,
                                       devinfo->target, devinfo->lun,
                                       saved_width, bus_width);
                        }

                        if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_WDTR, TRUE)) {
                                /*
                                 * Don't send a WDTR back to the
                                 * target, since we asked first.
                                 * If the width went higher than our
                                 * request, reject it.
                                 */
                                if (saved_width > bus_width) {
                                        reject = TRUE;
                                        printk("(%s:%c:%d:%d): requested %dBit "
                                               "transfers.  Rejecting...\n",
                                               ahd_name(ahd), devinfo->channel,
                                               devinfo->target, devinfo->lun,
                                               8 * (0x01 << bus_width));
                                        bus_width = 0;
                                }
                        } else {
                                /*
                                 * Send our own WDTR in reply
                                 */
                                if (bootverbose
                                 && devinfo->role == ROLE_INITIATOR) {
                                        printk("(%s:%c:%d:%d): Target "
                                               "Initiated WDTR\n",
                                               ahd_name(ahd), devinfo->channel,
                                               devinfo->target, devinfo->lun);
                                }
                                ahd->msgout_index = 0;
                                ahd->msgout_len = 0;
                                ahd_construct_wdtr(ahd, devinfo, bus_width);
                                ahd->msgout_index = 0;
                                response = TRUE;
                                sending_reply = TRUE;
                        }
                        /*
                         * After a wide message, we are async, but
                         * some devices don't seem to honor this portion
                         * of the spec.  Force a renegotiation of the
                         * sync component of our transfer agreement even
                         * if our goal is async.  By updating our width
                         * after forcing the negotiation, we avoid
                         * renegotiating for width.
                         */
                        ahd_update_neg_request(ahd, devinfo, tstate,
                                               tinfo, AHD_NEG_ALWAYS);
                        ahd_set_width(ahd, devinfo, bus_width,
                                      AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                                      /*paused*/TRUE);
                        if (sending_reply == FALSE && reject == FALSE) {

                                /*
                                 * We will always have an SDTR to send.
                                 */
                                ahd->msgout_index = 0;
                                ahd->msgout_len = 0;
                                ahd_build_transfer_msg(ahd, devinfo);
                                ahd->msgout_index = 0;
                                response = TRUE;
                        }
                        done = MSGLOOP_MSGCOMPLETE;
                        break;
                }
                case EXTENDED_PPR:
                {
                        u_int   period;
                        u_int   offset;
                        u_int   bus_width;
                        u_int   ppr_options;
                        u_int   saved_width;
                        u_int   saved_offset;
                        u_int   saved_ppr_options;

                        if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) {
                                reject = TRUE;
                                break;
                        }

                        /*
                         * Wait until we have all args before validating
                         * and acting on this message.
                         *
                         * Add one to MSG_EXT_PPR_LEN to account for
                         * the extended message preamble.
                         */
                        if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1))
                                break;

                        period = ahd->msgin_buf[3];
                        offset = ahd->msgin_buf[5];
                        bus_width = ahd->msgin_buf[6];
                        saved_width = bus_width;
                        ppr_options = ahd->msgin_buf[7];
                        /*
                         * According to the spec, a DT only
                         * period factor with no DT option
                         * set implies async.
                         */
                        if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
                         && period <= 9)
                                offset = 0;
                        saved_ppr_options = ppr_options;
                        saved_offset = offset;

                        /*
                         * Transfer options are only available if we
                         * are negotiating wide.
                         */
                        if (bus_width == 0)
                                ppr_options &= MSG_EXT_PPR_QAS_REQ;

                        ahd_validate_width(ahd, tinfo, &bus_width,
                                           devinfo->role);
                        ahd_devlimited_syncrate(ahd, tinfo, &period,
                                                &ppr_options, devinfo->role);
                        ahd_validate_offset(ahd, tinfo, period, &offset,
                                            bus_width, devinfo->role);

                        if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_PPR, TRUE)) {
                                /*
                                 * If we are unable to do any of the
                                 * requested options (we went too low),
                                 * then we'll have to reject the message.
                                 */
                                if (saved_width > bus_width
                                 || saved_offset != offset
                                 || saved_ppr_options != ppr_options) {
                                        reject = TRUE;
                                        period = 0;
                                        offset = 0;
                                        bus_width = 0;
                                        ppr_options = 0;
                                }
                        } else {
                                if (devinfo->role != ROLE_TARGET)
                                        printk("(%s:%c:%d:%d): Target "
                                               "Initiated PPR\n",
                                               ahd_name(ahd), devinfo->channel,
                                               devinfo->target, devinfo->lun);
                                else
                                        printk("(%s:%c:%d:%d): Initiator "
                                               "Initiated PPR\n",
                                               ahd_name(ahd), devinfo->channel,
                                               devinfo->target, devinfo->lun);
                                ahd->msgout_index = 0;
                                ahd->msgout_len = 0;
                                ahd_construct_ppr(ahd, devinfo, period, offset,
                                                  bus_width, ppr_options);
                                ahd->msgout_index = 0;
                                response = TRUE;
                        }
                        if (bootverbose) {
                                printk("(%s:%c:%d:%d): Received PPR width %x, "
                                       "period %x, offset %x,options %x\n"
                                       "\tFiltered to width %x, period %x, "
                                       "offset %x, options %x\n",
                                       ahd_name(ahd), devinfo->channel,
                                       devinfo->target, devinfo->lun,
                                       saved_width, ahd->msgin_buf[3],
                                       saved_offset, saved_ppr_options,
                                       bus_width, period, offset, ppr_options);
                        }
                        ahd_set_width(ahd, devinfo, bus_width,
                                      AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                                      /*paused*/TRUE);
                        ahd_set_syncrate(ahd, devinfo, period,
                                         offset, ppr_options,
                                         AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                                         /*paused*/TRUE);

                        done = MSGLOOP_MSGCOMPLETE;
                        break;
                }
                default:
                        /* Unknown extended message.  Reject it. */
                        reject = TRUE;
                        break;
                }
                break;
        }
#ifdef AHD_TARGET_MODE
        case TARGET_RESET:
                ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD,
                                    CAM_BDR_SENT,
                                    "Bus Device Reset Received",
                                    /*verbose_level*/0);
                ahd_restart(ahd);
                done = MSGLOOP_TERMINATED;
                break;
        case ABORT_TASK:
        case ABORT_TASK_SET:
        case CLEAR_TASK_SET:
        {
                int tag;

                /* Target mode messages */
                if (devinfo->role != ROLE_TARGET) {
                        reject = TRUE;
                        break;
                }
                tag = SCB_LIST_NULL;
                if (ahd->msgin_buf[0] == ABORT_TASK)
                        tag = ahd_inb(ahd, INITIATOR_TAG);
                ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
                               devinfo->lun, tag, ROLE_TARGET,
                               CAM_REQ_ABORTED);

                tstate = ahd->enabled_targets[devinfo->our_scsiid];
                if (tstate != NULL) {
                        struct ahd_tmode_lstate* lstate;

                        lstate = tstate->enabled_luns[devinfo->lun];
                        if (lstate != NULL) {
                                ahd_queue_lstate_event(ahd, lstate,
                                                       devinfo->our_scsiid,
                                                       ahd->msgin_buf[0],
                                                       /*arg*/tag);
                                ahd_send_lstate_events(ahd, lstate);
                        }
                }
                ahd_restart(ahd);
                done = MSGLOOP_TERMINATED;
                break;
        }
#endif
        case QAS_REQUEST:
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
                        printk("%s: QAS request.  SCSISIGI == 0x%x\n",
                               ahd_name(ahd), ahd_inb(ahd, SCSISIGI));
#endif
                ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE;
                fallthrough;
        case TERMINATE_IO_PROC:
        default:
                reject = TRUE;
                break;
        }

        if (reject) {
                /*
                 * Setup to reject the message.
                 */
                ahd->msgout_index = 0;
                ahd->msgout_len = 1;
                ahd->msgout_buf[0] = MESSAGE_REJECT;
                done = MSGLOOP_MSGCOMPLETE;
                response = TRUE;
        }

        if (done != MSGLOOP_IN_PROG && !response)
                /* Clear the outgoing message buffer */
                ahd->msgout_len = 0;

        return (done);
}

/*
 * Process a message reject message.
 */
static int
ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        /*
         * What we care about here is if we had an
         * outstanding SDTR or WDTR message for this
         * target.  If we did, this is a signal that
         * the target is refusing negotiation.
         */
        struct scb *scb;
        struct ahd_initiator_tinfo *tinfo;
        struct ahd_tmode_tstate *tstate;
        u_int scb_index;
        u_int last_msg;
        int   response = 0;

        scb_index = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scb_index);
        tinfo = ahd_fetch_transinfo(ahd, devinfo->channel,
                                    devinfo->our_scsiid,
                                    devinfo->target, &tstate);
        /* Might be necessary */
        last_msg = ahd_inb(ahd, LAST_MSG);

        if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_PPR, /*full*/FALSE)) {
                if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_PPR, /*full*/TRUE)
                 && tinfo->goal.period <= AHD_SYNCRATE_PACED) {
                        /*
                         * Target may not like our SPI-4 PPR Options.
                         * Attempt to negotiate 80MHz which will turn
                         * off these options.
                         */
                        if (bootverbose) {
                                printk("(%s:%c:%d:%d): PPR Rejected. "
                                       "Trying simple U160 PPR\n",
                                       ahd_name(ahd), devinfo->channel,
                                       devinfo->target, devinfo->lun);
                        }
                        tinfo->goal.period = AHD_SYNCRATE_DT;
                        tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ
                                                |  MSG_EXT_PPR_QAS_REQ
                                                |  MSG_EXT_PPR_DT_REQ;
                } else {
                        /*
                         * Target does not support the PPR message.
                         * Attempt to negotiate SPI-2 style.
                         */
                        if (bootverbose) {
                                printk("(%s:%c:%d:%d): PPR Rejected. "
                                       "Trying WDTR/SDTR\n",
                                       ahd_name(ahd), devinfo->channel,
                                       devinfo->target, devinfo->lun);
                        }
                        tinfo->goal.ppr_options = 0;
                        tinfo->curr.transport_version = 2;
                        tinfo->goal.transport_version = 2;
                }
                ahd->msgout_index = 0;
                ahd->msgout_len = 0;
                ahd_build_transfer_msg(ahd, devinfo);
                ahd->msgout_index = 0;
                response = 1;
        } else if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_WDTR, /*full*/FALSE)) {

                /* note 8bit xfers */
                printk("(%s:%c:%d:%d): refuses WIDE negotiation.  Using "
                       "8bit transfers\n", ahd_name(ahd),
                       devinfo->channel, devinfo->target, devinfo->lun);
                ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                              AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                              /*paused*/TRUE);
                /*
                 * No need to clear the sync rate.  If the target
                 * did not accept the command, our syncrate is
                 * unaffected.  If the target started the negotiation,
                 * but rejected our response, we already cleared the
                 * sync rate before sending our WDTR.
                 */
                if (tinfo->goal.offset != tinfo->curr.offset) {

                        /* Start the sync negotiation */
                        ahd->msgout_index = 0;
                        ahd->msgout_len = 0;
                        ahd_build_transfer_msg(ahd, devinfo);
                        ahd->msgout_index = 0;
                        response = 1;
                }
        } else if (ahd_sent_msg(ahd, AHDMSG_EXT, EXTENDED_SDTR, /*full*/FALSE)) {
                /* note asynch xfers and clear flag */
                ahd_set_syncrate(ahd, devinfo, /*period*/0,
                                 /*offset*/0, /*ppr_options*/0,
                                 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
                                 /*paused*/TRUE);
                printk("(%s:%c:%d:%d): refuses synchronous negotiation. "
                       "Using asynchronous transfers\n",
                       ahd_name(ahd), devinfo->channel,
                       devinfo->target, devinfo->lun);
        } else if ((scb->hscb->control & SIMPLE_QUEUE_TAG) != 0) {
                int tag_type;
                int mask;

                tag_type = (scb->hscb->control & SIMPLE_QUEUE_TAG);

                if (tag_type == SIMPLE_QUEUE_TAG) {
                        printk("(%s:%c:%d:%d): refuses tagged commands.  "
                               "Performing non-tagged I/O\n", ahd_name(ahd),
                               devinfo->channel, devinfo->target, devinfo->lun);
                        ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE);
                        mask = ~0x23;
                } else {
                        printk("(%s:%c:%d:%d): refuses %s tagged commands.  "
                               "Performing simple queue tagged I/O only\n",
                               ahd_name(ahd), devinfo->channel, devinfo->target,
                               devinfo->lun, tag_type == ORDERED_QUEUE_TAG
                               ? "ordered" : "head of queue");
                        ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC);
                        mask = ~0x03;
                }

                /*
                 * Resend the identify for this CCB as the target
                 * may believe that the selection is invalid otherwise.
                 */
                ahd_outb(ahd, SCB_CONTROL,
                         ahd_inb_scbram(ahd, SCB_CONTROL) & mask);
                scb->hscb->control &= mask;
                ahd_set_transaction_tag(scb, /*enabled*/FALSE,
                                        /*type*/SIMPLE_QUEUE_TAG);
                ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG);
                ahd_assert_atn(ahd);
                ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
                             SCB_GET_TAG(scb));

                /*
                 * Requeue all tagged commands for this target
                 * currently in our possession so they can be
                 * converted to untagged commands.
                 */
                ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
                                   SCB_GET_CHANNEL(ahd, scb),
                                   SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
                                   ROLE_INITIATOR, CAM_REQUEUE_REQ,
                                   SEARCH_COMPLETE);
        } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) {
                /*
                 * Most likely the device believes that we had
                 * previously negotiated packetized.
                 */
                ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
                               |  MSG_FLAG_IU_REQ_CHANGED;

                ahd_force_renegotiation(ahd, devinfo);
                ahd->msgout_index = 0;
                ahd->msgout_len = 0;
                ahd_build_transfer_msg(ahd, devinfo);
                ahd->msgout_index = 0;
                response = 1;
        } else {
                /*
                 * Otherwise, we ignore it.
                 */
                printk("%s:%c:%d: Message reject for %x -- ignored\n",
                       ahd_name(ahd), devinfo->channel, devinfo->target,
                       last_msg);
        }
        return (response);
}

/*
 * Process an ingnore wide residue message.
 */
static void
ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
        u_int scb_index;
        struct scb *scb;

        scb_index = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scb_index);
        /*
         * XXX Actually check data direction in the sequencer?
         * Perhaps add datadir to some spare bits in the hscb?
         */
        if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0
         || ahd_get_transfer_dir(scb) != CAM_DIR_IN) {
                /*
                 * Ignore the message if we haven't
                 * seen an appropriate data phase yet.
                 */
        } else {
                /*
                 * If the residual occurred on the last
                 * transfer and the transfer request was
                 * expected to end on an odd count, do
                 * nothing.  Otherwise, subtract a byte
                 * and update the residual count accordingly.
                 */
                uint32_t sgptr;

                sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
                if ((sgptr & SG_LIST_NULL) != 0
                 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
                     & SCB_XFERLEN_ODD) != 0) {
                        /*
                         * If the residual occurred on the last
                         * transfer and the transfer request was
                         * expected to end on an odd count, do
                         * nothing.
                         */
                } else {
                        uint32_t data_cnt;
                        uint64_t data_addr;
                        uint32_t sglen;

                        /* Pull in the rest of the sgptr */
                        sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
                        data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT);
                        if ((sgptr & SG_LIST_NULL) != 0) {
                                /*
                                 * The residual data count is not updated
                                 * for the command run to completion case.
                                 * Explicitly zero the count.
                                 */
                                data_cnt &= ~AHD_SG_LEN_MASK;
                        }
                        data_addr = ahd_inq(ahd, SHADDR);
                        data_cnt += 1;
                        data_addr -= 1;
                        sgptr &= SG_PTR_MASK;
                        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
                                struct ahd_dma64_seg *sg;

                                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);

                                /*
                                 * The residual sg ptr points to the next S/G
                                 * to load so we must go back one.
                                 */
                                sg--;
                                sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
                                if (sg != scb->sg_list
                                 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {

                                        sg--;
                                        sglen = ahd_le32toh(sg->len);
                                        /*
                                         * Preserve High Address and SG_LIST
                                         * bits while setting the count to 1.
                                         */
                                        data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
                                        data_addr = ahd_le64toh(sg->addr)
                                                  + (sglen & AHD_SG_LEN_MASK)
                                                  - 1;

                                        /*
                                         * Increment sg so it points to the
                                         * "next" sg.
                                         */
                                        sg++;
                                        sgptr = ahd_sg_virt_to_bus(ahd, scb,
                                                                   sg);
                                }
                        } else {
                                struct ahd_dma_seg *sg;

                                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);

                                /*
                                 * The residual sg ptr points to the next S/G
                                 * to load so we must go back one.
                                 */
                                sg--;
                                sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
                                if (sg != scb->sg_list
                                 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {

                                        sg--;
                                        sglen = ahd_le32toh(sg->len);
                                        /*
                                         * Preserve High Address and SG_LIST
                                         * bits while setting the count to 1.
                                         */
                                        data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
                                        data_addr = ahd_le32toh(sg->addr)
                                                  + (sglen & AHD_SG_LEN_MASK)
                                                  - 1;

                                        /*
                                         * Increment sg so it points to the
                                         * "next" sg.
                                         */
                                        sg++;
                                        sgptr = ahd_sg_virt_to_bus(ahd, scb,
                                                                  sg);
                                }
                        }
                        /*
                         * Toggle the "oddness" of the transfer length
                         * to handle this mid-transfer ignore wide
                         * residue.  This ensures that the oddness is
                         * correct for subsequent data transfers.
                         */
                        ahd_outb(ahd, SCB_TASK_ATTRIBUTE,
                            ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
                            ^ SCB_XFERLEN_ODD);

                        ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
                        ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt);
                        /*
                         * The FIFO's pointers will be updated if/when the
                         * sequencer re-enters a data phase.
                         */
                }
        }
}


/*
 * Reinitialize the data pointers for the active transfer
 * based on its current residual.
 */
static void
ahd_reinitialize_dataptrs(struct ahd_softc *ahd)
{
        struct           scb *scb;
        ahd_mode_state   saved_modes;
        u_int            scb_index;
        u_int            wait;
        uint32_t         sgptr;
        uint32_t         resid;
        uint64_t         dataptr;

        AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK,
                         AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK);

        scb_index = ahd_get_scbptr(ahd);
        scb = ahd_lookup_scb(ahd, scb_index);

        /*
         * Release and reacquire the FIFO so we
         * have a clean slate.
         */
        ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
        wait = 1000;
        while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE))
                ahd_delay(100);
        if (wait == 0) {
                ahd_print_path(ahd, scb);
                printk("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
                ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
        }
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        ahd_outb(ahd, DFFSTAT,
                 ahd_inb(ahd, DFFSTAT)
                | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0));

        /*
         * Determine initial values for data_addr and data_cnt
         * for resuming the data phase.
         */
        sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
        sgptr &= SG_PTR_MASK;

        resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16)
              | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8)
              | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT);

        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
                struct ahd_dma64_seg *sg;

                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);

                /* The residual sg_ptr always points to the next sg */
                sg--;

                dataptr = ahd_le64toh(sg->addr)
                        + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
                        - resid;
                ahd_outl(ahd, HADDR + 4, dataptr >> 32);
        } else {
                struct   ahd_dma_seg *sg;

                sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);

                /* The residual sg_ptr always points to the next sg */
                sg--;

                dataptr = ahd_le32toh(sg->addr)
                        + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
                        - resid;
                ahd_outb(ahd, HADDR + 4,
                         (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24);
        }
        ahd_outl(ahd, HADDR, dataptr);
        ahd_outb(ahd, HCNT + 2, resid >> 16);
        ahd_outb(ahd, HCNT + 1, resid >> 8);
        ahd_outb(ahd, HCNT, resid);
}

/*
 * Handle the effects of issuing a bus device reset message.
 */
static void
ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                    u_int lun, cam_status status, char *message,
                    int verbose_level)
{
#ifdef AHD_TARGET_MODE
        struct ahd_tmode_tstate* tstate;
#endif
        int found;

        found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
                               lun, SCB_LIST_NULL, devinfo->role,
                               status);

#ifdef AHD_TARGET_MODE
        /*
         * Send an immediate notify ccb to all target mord peripheral
         * drivers affected by this action.
         */
        tstate = ahd->enabled_targets[devinfo->our_scsiid];
        if (tstate != NULL) {
                u_int cur_lun;
                u_int max_lun;

                if (lun != CAM_LUN_WILDCARD) {
                        cur_lun = 0;
                        max_lun = AHD_NUM_LUNS - 1;
                } else {
                        cur_lun = lun;
                        max_lun = lun;
                }
                for (;cur_lun <= max_lun; cur_lun++) {
                        struct ahd_tmode_lstate* lstate;

                        lstate = tstate->enabled_luns[cur_lun];
                        if (lstate == NULL)
                                continue;

                        ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid,
                                               TARGET_RESET, /*arg*/0);
                        ahd_send_lstate_events(ahd, lstate);
                }
        }
#endif

        /*
         * Go back to async/narrow transfers and renegotiate.
         */
        ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                      AHD_TRANS_CUR, /*paused*/TRUE);
        ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0,
                         /*ppr_options*/0, AHD_TRANS_CUR,
                         /*paused*/TRUE);

        if (status != CAM_SEL_TIMEOUT)
                ahd_send_async(ahd, devinfo->channel, devinfo->target,
                               CAM_LUN_WILDCARD, AC_SENT_BDR);

        if (message != NULL && bootverbose)
                printk("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
                       message, devinfo->channel, devinfo->target, found);
}

#ifdef AHD_TARGET_MODE
static void
ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
                       struct scb *scb)
{

        /*
         * To facilitate adding multiple messages together,
         * each routine should increment the index and len
         * variables instead of setting them explicitly.
         */
        ahd->msgout_index = 0;
        ahd->msgout_len = 0;

        if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
                ahd_build_transfer_msg(ahd, devinfo);
        else
                panic("ahd_intr: AWAITING target message with no message");

        ahd->msgout_index = 0;
        ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
}
#endif
/**************************** Initialization **********************************/
static u_int
ahd_sglist_size(struct ahd_softc *ahd)
{
        bus_size_t list_size;

        list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG;
        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
                list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG;
        return (list_size);
}

/*
 * Calculate the optimum S/G List allocation size.  S/G elements used
 * for a given transaction must be physically contiguous.  Assume the
 * OS will allocate full pages to us, so it doesn't make sense to request
 * less than a page.
 */
static u_int
ahd_sglist_allocsize(struct ahd_softc *ahd)
{
        bus_size_t sg_list_increment;
        bus_size_t sg_list_size;
        bus_size_t max_list_size;
        bus_size_t best_list_size;

        /* Start out with the minimum required for AHD_NSEG. */
        sg_list_increment = ahd_sglist_size(ahd);
        sg_list_size = sg_list_increment;

        /* Get us as close as possible to a page in size. */
        while ((sg_list_size + sg_list_increment) <= PAGE_SIZE)
                sg_list_size += sg_list_increment;

        /*
         * Try to reduce the amount of wastage by allocating
         * multiple pages.
         */
        best_list_size = sg_list_size;
        max_list_size = roundup(sg_list_increment, PAGE_SIZE);
        if (max_list_size < 4 * PAGE_SIZE)
                max_list_size = 4 * PAGE_SIZE;
        if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment))
                max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment);
        while ((sg_list_size + sg_list_increment) <= max_list_size
           &&  (sg_list_size % PAGE_SIZE) != 0) {
                bus_size_t new_mod;
                bus_size_t best_mod;

                sg_list_size += sg_list_increment;
                new_mod = sg_list_size % PAGE_SIZE;
                best_mod = best_list_size % PAGE_SIZE;
                if (new_mod > best_mod || new_mod == 0) {
                        best_list_size = sg_list_size;
                }
        }
        return (best_list_size);
}

/*
 * Allocate a controller structure for a new device
 * and perform initial initializion.
 */
struct ahd_softc *
ahd_alloc(void *platform_arg, char *name)
{
        struct  ahd_softc *ahd;

        ahd = kzalloc(sizeof(*ahd), GFP_ATOMIC);
        if (!ahd) {
                printk("aic7xxx: cannot malloc softc!\n");
                kfree(name);
                return NULL;
        }

        ahd->seep_config = kmalloc(sizeof(*ahd->seep_config), GFP_ATOMIC);
        if (ahd->seep_config == NULL) {
                kfree(ahd);
                kfree(name);
                return (NULL);
        }
        LIST_INIT(&ahd->pending_scbs);
        /* We don't know our unit number until the OSM sets it */
        ahd->name = name;
        ahd->unit = -1;
        ahd->description = NULL;
        ahd->bus_description = NULL;
        ahd->channel = 'A';
        ahd->chip = AHD_NONE;
        ahd->features = AHD_FENONE;
        ahd->bugs = AHD_BUGNONE;
        ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A
                   | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A;
        timer_setup(&ahd->stat_timer, ahd_stat_timer, 0);
        ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT;
        ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT;
        ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT;
        ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT;
        ahd->int_coalescing_stop_threshold =
            AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT;

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MEMORY) != 0) {
                printk("%s: scb size = 0x%x, hscb size = 0x%x\n",
                       ahd_name(ahd), (u_int)sizeof(struct scb),
                       (u_int)sizeof(struct hardware_scb));
        }
#endif
        if (ahd_platform_alloc(ahd, platform_arg) != 0) {
                ahd_free(ahd);
                ahd = NULL;
        }
        return (ahd);
}

int
ahd_softc_init(struct ahd_softc *ahd)
{

        ahd->unpause = 0;
        ahd->pause = PAUSE;
        return (0);
}

void
ahd_set_unit(struct ahd_softc *ahd, int unit)
{
        ahd->unit = unit;
}

void
ahd_set_name(struct ahd_softc *ahd, char *name)
{
        kfree(ahd->name);
        ahd->name = name;
}

void
ahd_free(struct ahd_softc *ahd)
{
        int i;

        switch (ahd->init_level) {
        default:
        case 5:
                ahd_shutdown(ahd);
                fallthrough;
        case 4:
                ahd_dmamap_unload(ahd, ahd->shared_data_dmat,
                                  ahd->shared_data_map.dmamap);
                fallthrough;
        case 3:
                ahd_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo,
                                ahd->shared_data_map.dmamap);
                ahd_dmamap_destroy(ahd, ahd->shared_data_dmat,
                                   ahd->shared_data_map.dmamap);
                fallthrough;
        case 2:
                ahd_dma_tag_destroy(ahd, ahd->shared_data_dmat);
                break;
        case 1:
                break;
        case 0:
                break;
        }

        ahd_platform_free(ahd);
        ahd_fini_scbdata(ahd);
        for (i = 0; i < AHD_NUM_TARGETS; i++) {
                struct ahd_tmode_tstate *tstate;

                tstate = ahd->enabled_targets[i];
                if (tstate != NULL) {
#ifdef AHD_TARGET_MODE
                        int j;

                        for (j = 0; j < AHD_NUM_LUNS; j++) {
                                struct ahd_tmode_lstate *lstate;

                                lstate = tstate->enabled_luns[j];
                                if (lstate != NULL) {
                                        xpt_free_path(lstate->path);
                                        kfree(lstate);
                                }
                        }
#endif
                        kfree(tstate);
                }
        }
#ifdef AHD_TARGET_MODE
        if (ahd->black_hole != NULL) {
                xpt_free_path(ahd->black_hole->path);
                kfree(ahd->black_hole);
        }
#endif
        kfree(ahd->name);
        kfree(ahd->seep_config);
        kfree(ahd->saved_stack);
        kfree(ahd);
        return;
}

static void
ahd_shutdown(void *arg)
{
        struct  ahd_softc *ahd;

        ahd = (struct ahd_softc *)arg;

        /*
         * Stop periodic timer callbacks.
         */
        del_timer_sync(&ahd->stat_timer);

        /* This will reset most registers to 0, but not all */
        ahd_reset(ahd, /*reinit*/FALSE);
}

/*
 * Reset the controller and record some information about it
 * that is only available just after a reset.  If "reinit" is
 * non-zero, this reset occurred after initial configuration
 * and the caller requests that the chip be fully reinitialized
 * to a runable state.  Chip interrupts are *not* enabled after
 * a reinitialization.  The caller must enable interrupts via
 * ahd_intr_enable().
 */
int
ahd_reset(struct ahd_softc *ahd, int reinit)
{
        u_int    sxfrctl1;
        int      wait;
        uint32_t cmd;

        /*
         * Preserve the value of the SXFRCTL1 register for all channels.
         * It contains settings that affect termination and we don't want
         * to disturb the integrity of the bus.
         */
        ahd_pause(ahd);
        ahd_update_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        sxfrctl1 = ahd_inb(ahd, SXFRCTL1);

        cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
        if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
                uint32_t mod_cmd;

                /*
                 * A4 Razor #632
                 * During the assertion of CHIPRST, the chip
                 * does not disable its parity logic prior to
                 * the start of the reset.  This may cause a
                 * parity error to be detected and thus a
                 * spurious SERR or PERR assertion.  Disable
                 * PERR and SERR responses during the CHIPRST.
                 */
                mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
                ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
                                     mod_cmd, /*bytes*/2);
        }
        ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause);

        /*
         * Ensure that the reset has finished.  We delay 1000us
         * prior to reading the register to make sure the chip
         * has sufficiently completed its reset to handle register
         * accesses.
         */
        wait = 1000;
        do {
                ahd_delay(1000);
        } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK));

        if (wait == 0) {
                printk("%s: WARNING - Failed chip reset!  "
                       "Trying to initialize anyway.\n", ahd_name(ahd));
        }
        ahd_outb(ahd, HCNTRL, ahd->pause);

        if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
                /*
                 * Clear any latched PCI error status and restore
                 * previous SERR and PERR response enables.
                 */
                ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
                                     0xFF, /*bytes*/1);
                ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
                                     cmd, /*bytes*/2);
        }

        /*
         * Mode should be SCSI after a chip reset, but lets
         * set it just to be safe.  We touch the MODE_PTR
         * register directly so as to bypass the lazy update
         * code in ahd_set_modes().
         */
        ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        ahd_outb(ahd, MODE_PTR,
                 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI));

        /*
         * Restore SXFRCTL1.
         *
         * We must always initialize STPWEN to 1 before we
         * restore the saved values.  STPWEN is initialized
         * to a tri-state condition which can only be cleared
         * by turning it on.
         */
        ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
        ahd_outb(ahd, SXFRCTL1, sxfrctl1);

        /* Determine chip configuration */
        ahd->features &= ~AHD_WIDE;
        if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0)
                ahd->features |= AHD_WIDE;

        /*
         * If a recovery action has forced a chip reset,
         * re-initialize the chip to our liking.
         */
        if (reinit != 0)
                ahd_chip_init(ahd);

        return (0);
}

/*
 * Determine the number of SCBs available on the controller
 */
static int
ahd_probe_scbs(struct ahd_softc *ahd) {
        int i;

        AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
                         ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
        for (i = 0; i < AHD_SCB_MAX; i++) {
                int j;

                ahd_set_scbptr(ahd, i);
                ahd_outw(ahd, SCB_BASE, i);
                for (j = 2; j < 64; j++)
                        ahd_outb(ahd, SCB_BASE+j, 0);
                /* Start out life as unallocated (needing an abort) */
                ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE);
                if (ahd_inw_scbram(ahd, SCB_BASE) != i)
                        break;
                ahd_set_scbptr(ahd, 0);
                if (ahd_inw_scbram(ahd, SCB_BASE) != 0)
                        break;
        }
        return (i);
}

static void
ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 
{
        dma_addr_t *baddr;

        baddr = (dma_addr_t *)arg;
        *baddr = segs->ds_addr;
}

static void
ahd_initialize_hscbs(struct ahd_softc *ahd)
{
        int i;

        for (i = 0; i < ahd->scb_data.maxhscbs; i++) {
                ahd_set_scbptr(ahd, i);

                /* Clear the control byte. */
                ahd_outb(ahd, SCB_CONTROL, 0);

                /* Set the next pointer */
                ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL);
        }
}

static int
ahd_init_scbdata(struct ahd_softc *ahd)
{
        struct  scb_data *scb_data;
        int     i;

        scb_data = &ahd->scb_data;
        TAILQ_INIT(&scb_data->free_scbs);
        for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++)
                LIST_INIT(&scb_data->free_scb_lists[i]);
        LIST_INIT(&scb_data->any_dev_free_scb_list);
        SLIST_INIT(&scb_data->hscb_maps);
        SLIST_INIT(&scb_data->sg_maps);
        SLIST_INIT(&scb_data->sense_maps);

        /* Determine the number of hardware SCBs and initialize them */
        scb_data->maxhscbs = ahd_probe_scbs(ahd);
        if (scb_data->maxhscbs == 0) {
                printk("%s: No SCB space found\n", ahd_name(ahd));
                return (ENXIO);
        }

        ahd_initialize_hscbs(ahd);

        /*
         * Create our DMA tags.  These tags define the kinds of device
         * accessible memory allocations and memory mappings we will
         * need to perform during normal operation.
         *
         * Unless we need to further restrict the allocation, we rely
         * on the restrictions of the parent dmat, hence the common
         * use of MAXADDR and MAXSIZE.
         */

        /* DMA tag for our hardware scb structures */
        if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
                               /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
                               /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
                               /*highaddr*/BUS_SPACE_MAXADDR,
                               /*filter*/NULL, /*filterarg*/NULL,
                               PAGE_SIZE, /*nsegments*/1,
                               /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
                               /*flags*/0, &scb_data->hscb_dmat) != 0) {
                goto error_exit;
        }

        scb_data->init_level++;

        /* DMA tag for our S/G structures. */
        if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8,
                               /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
                               /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
                               /*highaddr*/BUS_SPACE_MAXADDR,
                               /*filter*/NULL, /*filterarg*/NULL,
                               ahd_sglist_allocsize(ahd), /*nsegments*/1,
                               /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
                               /*flags*/0, &scb_data->sg_dmat) != 0) {
                goto error_exit;
        }
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MEMORY) != 0)
                printk("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd),
                       ahd_sglist_allocsize(ahd));
#endif

        scb_data->init_level++;

        /* DMA tag for our sense buffers.  We allocate in page sized chunks */
        if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
                               /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
                               /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
                               /*highaddr*/BUS_SPACE_MAXADDR,
                               /*filter*/NULL, /*filterarg*/NULL,
                               PAGE_SIZE, /*nsegments*/1,
                               /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
                               /*flags*/0, &scb_data->sense_dmat) != 0) {
                goto error_exit;
        }

        scb_data->init_level++;

        /* Perform initial CCB allocation */
        ahd_alloc_scbs(ahd);

        if (scb_data->numscbs == 0) {
                printk("%s: ahd_init_scbdata - "
                       "Unable to allocate initial scbs\n",
                       ahd_name(ahd));
                goto error_exit;
        }

        /*
         * Note that we were successful
         */
        return (0);

error_exit:

        return (ENOMEM);
}

static struct scb *
ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag)
{
        struct scb *scb;

        /*
         * Look on the pending list.
         */
        LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
                if (SCB_GET_TAG(scb) == tag)
                        return (scb);
        }

        /*
         * Then on all of the collision free lists.
         */
        TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
                struct scb *list_scb;

                list_scb = scb;
                do {
                        if (SCB_GET_TAG(list_scb) == tag)
                                return (list_scb);
                        list_scb = LIST_NEXT(list_scb, collision_links);
                } while (list_scb);
        }

        /*
         * And finally on the generic free list.
         */
        LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
                if (SCB_GET_TAG(scb) == tag)
                        return (scb);
        }

        return (NULL);
}

static void
ahd_fini_scbdata(struct ahd_softc *ahd)
{
        struct scb_data *scb_data;

        scb_data = &ahd->scb_data;
        if (scb_data == NULL)
                return;

        switch (scb_data->init_level) {
        default:
        case 7:
        {
                struct map_node *sns_map;

                while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) {
                        SLIST_REMOVE_HEAD(&scb_data->sense_maps, links);
                        ahd_dmamap_unload(ahd, scb_data->sense_dmat,
                                          sns_map->dmamap);
                        ahd_dmamem_free(ahd, scb_data->sense_dmat,
                                        sns_map->vaddr, sns_map->dmamap);
                        kfree(sns_map);
                }
                ahd_dma_tag_destroy(ahd, scb_data->sense_dmat);
        }
                fallthrough;
        case 6:
        {
                struct map_node *sg_map;

                while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) {
                        SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
                        ahd_dmamap_unload(ahd, scb_data->sg_dmat,
                                          sg_map->dmamap);
                        ahd_dmamem_free(ahd, scb_data->sg_dmat,
                                        sg_map->vaddr, sg_map->dmamap);
                        kfree(sg_map);
                }
                ahd_dma_tag_destroy(ahd, scb_data->sg_dmat);
        }
                fallthrough;
        case 5:
        {
                struct map_node *hscb_map;

                while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) {
                        SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links);
                        ahd_dmamap_unload(ahd, scb_data->hscb_dmat,
                                          hscb_map->dmamap);
                        ahd_dmamem_free(ahd, scb_data->hscb_dmat,
                                        hscb_map->vaddr, hscb_map->dmamap);
                        kfree(hscb_map);
                }
                ahd_dma_tag_destroy(ahd, scb_data->hscb_dmat);
        }
                fallthrough;
        case 4:
        case 3:
        case 2:
        case 1:
        case 0:
                break;
        }
}

/*
 * DSP filter Bypass must be enabled until the first selection
 * after a change in bus mode (Razor #491 and #493).
 */
static void
ahd_setup_iocell_workaround(struct ahd_softc *ahd)
{
        ahd_mode_state saved_modes;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
        ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL)
               | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS);
        ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI));
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MISC) != 0)
                printk("%s: Setting up iocell workaround\n", ahd_name(ahd));
#endif
        ahd_restore_modes(ahd, saved_modes);
        ahd->flags &= ~AHD_HAD_FIRST_SEL;
}

static void
ahd_iocell_first_selection(struct ahd_softc *ahd)
{
        ahd_mode_state  saved_modes;
        u_int           sblkctl;

        if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0)
                return;
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        sblkctl = ahd_inb(ahd, SBLKCTL);
        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MISC) != 0)
                printk("%s: iocell first selection\n", ahd_name(ahd));
#endif
        if ((sblkctl & ENAB40) != 0) {
                ahd_outb(ahd, DSPDATACTL,
                         ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MISC) != 0)
                        printk("%s: BYPASS now disabled\n", ahd_name(ahd));
#endif
        }
        ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI));
        ahd_outb(ahd, CLRINT, CLRSCSIINT);
        ahd_restore_modes(ahd, saved_modes);
        ahd->flags |= AHD_HAD_FIRST_SEL;
}

/*************************** SCB Management ***********************************/
static void
ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx)
{
        struct  scb_list *free_list;
        struct  scb_tailq *free_tailq;
        struct  scb *first_scb;

        scb->flags |= SCB_ON_COL_LIST;
        AHD_SET_SCB_COL_IDX(scb, col_idx);
        free_list = &ahd->scb_data.free_scb_lists[col_idx];
        free_tailq = &ahd->scb_data.free_scbs;
        first_scb = LIST_FIRST(free_list);
        if (first_scb != NULL) {
                LIST_INSERT_AFTER(first_scb, scb, collision_links);
        } else {
                LIST_INSERT_HEAD(free_list, scb, collision_links);
                TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe);
        }
}

static void
ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb)
{
        struct  scb_list *free_list;
        struct  scb_tailq *free_tailq;
        struct  scb *first_scb;
        u_int   col_idx;

        scb->flags &= ~SCB_ON_COL_LIST;
        col_idx = AHD_GET_SCB_COL_IDX(ahd, scb);
        free_list = &ahd->scb_data.free_scb_lists[col_idx];
        free_tailq = &ahd->scb_data.free_scbs;
        first_scb = LIST_FIRST(free_list);
        if (first_scb == scb) {
                struct scb *next_scb;

                /*
                 * Maintain order in the collision free
                 * lists for fairness if this device has
                 * other colliding tags active.
                 */
                next_scb = LIST_NEXT(scb, collision_links);
                if (next_scb != NULL) {
                        TAILQ_INSERT_AFTER(free_tailq, scb,
                                           next_scb, links.tqe);
                }
                TAILQ_REMOVE(free_tailq, scb, links.tqe);
        }
        LIST_REMOVE(scb, collision_links);
}

/*
 * Get a free scb. If there are none, see if we can allocate a new SCB.
 */
struct scb *
ahd_get_scb(struct ahd_softc *ahd, u_int col_idx)
{
        struct scb *scb;
        int tries;

        tries = 0;
look_again:
        TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
                if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) {
                        ahd_rem_col_list(ahd, scb);
                        goto found;
                }
        }
        if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) {

                if (tries++ != 0)
                        return (NULL);
                ahd_alloc_scbs(ahd);
                goto look_again;
        }
        LIST_REMOVE(scb, links.le);
        if (col_idx != AHD_NEVER_COL_IDX
         && (scb->col_scb != NULL)
         && (scb->col_scb->flags & SCB_ACTIVE) == 0) {
                LIST_REMOVE(scb->col_scb, links.le);
                ahd_add_col_list(ahd, scb->col_scb, col_idx);
        }
found:
        scb->flags |= SCB_ACTIVE;
        return (scb);
}

/*
 * Return an SCB resource to the free list.
 */
void
ahd_free_scb(struct ahd_softc *ahd, struct scb *scb)
{
        /* Clean up for the next user */
        scb->flags = SCB_FLAG_NONE;
        scb->hscb->control = 0;
        ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL;

        if (scb->col_scb == NULL) {

                /*
                 * No collision possible.  Just free normally.
                 */
                LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
                                 scb, links.le);
        } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) {

                /*
                 * The SCB we might have collided with is on
                 * a free collision list.  Put both SCBs on
                 * the generic list.
                 */
                ahd_rem_col_list(ahd, scb->col_scb);
                LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
                                 scb, links.le);
                LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
                                 scb->col_scb, links.le);
        } else if ((scb->col_scb->flags
                  & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE
                && (scb->col_scb->hscb->control & TAG_ENB) != 0) {

                /*
                 * The SCB we might collide with on the next allocation
                 * is still active in a non-packetized, tagged, context.
                 * Put us on the SCB collision list.
                 */
                ahd_add_col_list(ahd, scb,
                                 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb));
        } else {
                /*
                 * The SCB we might collide with on the next allocation
                 * is either active in a packetized context, or free.
                 * Since we can't collide, put this SCB on the generic
                 * free list.
                 */
                LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
                                 scb, links.le);
        }

        ahd_platform_scb_free(ahd, scb);
}

static void
ahd_alloc_scbs(struct ahd_softc *ahd)
{
        struct scb_data *scb_data;
        struct scb      *next_scb;
        struct hardware_scb *hscb;
        struct map_node *hscb_map;
        struct map_node *sg_map;
        struct map_node *sense_map;
        uint8_t         *segs;
        uint8_t         *sense_data;
        dma_addr_t       hscb_busaddr;
        dma_addr_t       sg_busaddr;
        dma_addr_t       sense_busaddr;
        int              newcount;
        int              i;

        scb_data = &ahd->scb_data;
        if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC)
                /* Can't allocate any more */
                return;

        if (scb_data->scbs_left != 0) {
                int offset;

                offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left;
                hscb_map = SLIST_FIRST(&scb_data->hscb_maps);
                hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset];
                hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb));
        } else {
                hscb_map = kmalloc(sizeof(*hscb_map), GFP_ATOMIC);

                if (hscb_map == NULL)
                        return;

                /* Allocate the next batch of hardware SCBs */
                if (ahd_dmamem_alloc(ahd, scb_data->hscb_dmat,
                                     (void **)&hscb_map->vaddr,
                                     BUS_DMA_NOWAIT, &hscb_map->dmamap) != 0) {
                        kfree(hscb_map);
                        return;
                }

                SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links);

                ahd_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap,
                                hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
                                &hscb_map->physaddr, /*flags*/0);

                hscb = (struct hardware_scb *)hscb_map->vaddr;
                hscb_busaddr = hscb_map->physaddr;
                scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb);
        }

        if (scb_data->sgs_left != 0) {
                int offset;

                offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd))
                       - scb_data->sgs_left) * ahd_sglist_size(ahd);
                sg_map = SLIST_FIRST(&scb_data->sg_maps);
                segs = sg_map->vaddr + offset;
                sg_busaddr = sg_map->physaddr + offset;
        } else {
                sg_map = kmalloc(sizeof(*sg_map), GFP_ATOMIC);

                if (sg_map == NULL)
                        return;

                /* Allocate the next batch of S/G lists */
                if (ahd_dmamem_alloc(ahd, scb_data->sg_dmat,
                                     (void **)&sg_map->vaddr,
                                     BUS_DMA_NOWAIT, &sg_map->dmamap) != 0) {
                        kfree(sg_map);
                        return;
                }

                SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);

                ahd_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap,
                                sg_map->vaddr, ahd_sglist_allocsize(ahd),
                                ahd_dmamap_cb, &sg_map->physaddr, /*flags*/0);

                segs = sg_map->vaddr;
                sg_busaddr = sg_map->physaddr;
                scb_data->sgs_left =
                    ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd);
#ifdef AHD_DEBUG
                if (ahd_debug & AHD_SHOW_MEMORY)
                        printk("Mapped SG data\n");
#endif
        }

        if (scb_data->sense_left != 0) {
                int offset;

                offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left);
                sense_map = SLIST_FIRST(&scb_data->sense_maps);
                sense_data = sense_map->vaddr + offset;
                sense_busaddr = sense_map->physaddr + offset;
        } else {
                sense_map = kmalloc(sizeof(*sense_map), GFP_ATOMIC);

                if (sense_map == NULL)
                        return;

                /* Allocate the next batch of sense buffers */
                if (ahd_dmamem_alloc(ahd, scb_data->sense_dmat,
                                     (void **)&sense_map->vaddr,
                                     BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) {
                        kfree(sense_map);
                        return;
                }

                SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links);

                ahd_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap,
                                sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
                                &sense_map->physaddr, /*flags*/0);

                sense_data = sense_map->vaddr;
                sense_busaddr = sense_map->physaddr;
                scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE;
#ifdef AHD_DEBUG
                if (ahd_debug & AHD_SHOW_MEMORY)
                        printk("Mapped sense data\n");
#endif
        }

        newcount = min(scb_data->sense_left, scb_data->scbs_left);
        newcount = min(newcount, scb_data->sgs_left);
        newcount = min(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs));
        for (i = 0; i < newcount; i++) {
                struct scb_platform_data *pdata;
                u_int col_tag;

                next_scb = kmalloc(sizeof(*next_scb), GFP_ATOMIC);
                if (next_scb == NULL)
                        break;

                pdata = kmalloc(sizeof(*pdata), GFP_ATOMIC);
                if (pdata == NULL) {
                        kfree(next_scb);
                        break;
                }
                next_scb->platform_data = pdata;
                next_scb->hscb_map = hscb_map;
                next_scb->sg_map = sg_map;
                next_scb->sense_map = sense_map;
                next_scb->sg_list = segs;
                next_scb->sense_data = sense_data;
                next_scb->sense_busaddr = sense_busaddr;
                memset(hscb, 0, sizeof(*hscb));
                next_scb->hscb = hscb;
                hscb->hscb_busaddr = ahd_htole32(hscb_busaddr);

                /*
                 * The sequencer always starts with the second entry.
                 * The first entry is embedded in the scb.
                 */
                next_scb->sg_list_busaddr = sg_busaddr;
                if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
                        next_scb->sg_list_busaddr
                            += sizeof(struct ahd_dma64_seg);
                else
                        next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg);
                next_scb->ahd_softc = ahd;
                next_scb->flags = SCB_FLAG_NONE;
                next_scb->hscb->tag = ahd_htole16(scb_data->numscbs);
                col_tag = scb_data->numscbs ^ 0x100;
                next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag);
                if (next_scb->col_scb != NULL)
                        next_scb->col_scb->col_scb = next_scb;
                ahd_free_scb(ahd, next_scb);
                hscb++;
                hscb_busaddr += sizeof(*hscb);
                segs += ahd_sglist_size(ahd);
                sg_busaddr += ahd_sglist_size(ahd);
                sense_data += AHD_SENSE_BUFSIZE;
                sense_busaddr += AHD_SENSE_BUFSIZE;
                scb_data->numscbs++;
                scb_data->sense_left--;
                scb_data->scbs_left--;
                scb_data->sgs_left--;
        }
}

void
ahd_controller_info(struct ahd_softc *ahd, char *buf)
{
        const char *speed;
        const char *type;
        int len;

        len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]);
        buf += len;

        speed = "Ultra320 ";
        if ((ahd->features & AHD_WIDE) != 0) {
                type = "Wide ";
        } else {
                type = "Single ";
        }
        len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ",
                      speed, type, ahd->channel, ahd->our_id);
        buf += len;

        sprintf(buf, "%s, %d SCBs", ahd->bus_description,
                ahd->scb_data.maxhscbs);
}

static const char *channel_strings[] = {
        "Primary Low",
        "Primary High",
        "Secondary Low",
        "Secondary High"
};

static const char *termstat_strings[] = {
        "Terminated Correctly",
        "Over Terminated",
        "Under Terminated",
        "Not Configured"
};

/***************************** Timer Facilities *******************************/
static void
ahd_timer_reset(struct timer_list *timer, int usec)
{
        del_timer(timer);
        timer->expires = jiffies + (usec * HZ)/1000000;
        add_timer(timer);
}

/*
 * Start the board, ready for normal operation
 */
int
ahd_init(struct ahd_softc *ahd)
{
        uint8_t         *next_vaddr;
        dma_addr_t       next_baddr;
        size_t           driver_data_size;
        int              i;
        int              error;
        u_int            warn_user;
        uint8_t          current_sensing;
        uint8_t          fstat;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);

        ahd->stack_size = ahd_probe_stack_size(ahd);
        ahd->saved_stack = kmalloc_array(ahd->stack_size, sizeof(uint16_t),
                                         GFP_ATOMIC);
        if (ahd->saved_stack == NULL)
                return (ENOMEM);

        /*
         * Verify that the compiler hasn't over-aggressively
         * padded important structures.
         */
        if (sizeof(struct hardware_scb) != 64)
                panic("Hardware SCB size is incorrect");

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0)
                ahd->flags |= AHD_SEQUENCER_DEBUG;
#endif

        /*
         * Default to allowing initiator operations.
         */
        ahd->flags |= AHD_INITIATORROLE;

        /*
         * Only allow target mode features if this unit has them enabled.
         */
        if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0)
                ahd->features &= ~AHD_TARGETMODE;

        ahd->init_level++;

        /*
         * DMA tag for our command fifos and other data in system memory
         * the card's sequencer must be able to access.  For initiator
         * roles, we need to allocate space for the qoutfifo.  When providing
         * for the target mode role, we must additionally provide space for
         * the incoming target command fifo.
         */
        driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo)
                         + sizeof(struct hardware_scb);
        if ((ahd->features & AHD_TARGETMODE) != 0)
                driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd);
        if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0)
                driver_data_size += PKT_OVERRUN_BUFSIZE;
        if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
                               /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
                               /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
                               /*highaddr*/BUS_SPACE_MAXADDR,
                               /*filter*/NULL, /*filterarg*/NULL,
                               driver_data_size,
                               /*nsegments*/1,
                               /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
                               /*flags*/0, &ahd->shared_data_dmat) != 0) {
                return (ENOMEM);
        }

        ahd->init_level++;

        /* Allocation of driver data */
        if (ahd_dmamem_alloc(ahd, ahd->shared_data_dmat,
                             (void **)&ahd->shared_data_map.vaddr,
                             BUS_DMA_NOWAIT,
                             &ahd->shared_data_map.dmamap) != 0) {
                return (ENOMEM);
        }

        ahd->init_level++;

        /* And permanently map it in */
        ahd_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
                        ahd->shared_data_map.vaddr, driver_data_size,
                        ahd_dmamap_cb, &ahd->shared_data_map.physaddr,
                        /*flags*/0);
        ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr;
        next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE];
        next_baddr = ahd->shared_data_map.physaddr
                   + AHD_QOUT_SIZE*sizeof(struct ahd_completion);
        if ((ahd->features & AHD_TARGETMODE) != 0) {
                ahd->targetcmds = (struct target_cmd *)next_vaddr;
                next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
                next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
        }

        if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
                ahd->overrun_buf = next_vaddr;
                next_vaddr += PKT_OVERRUN_BUFSIZE;
                next_baddr += PKT_OVERRUN_BUFSIZE;
        }

        /*
         * We need one SCB to serve as the "next SCB".  Since the
         * tag identifier in this SCB will never be used, there is
         * no point in using a valid HSCB tag from an SCB pulled from
         * the standard free pool.  So, we allocate this "sentinel"
         * specially from the DMA safe memory chunk used for the QOUTFIFO.
         */
        ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr;
        ahd->next_queued_hscb_map = &ahd->shared_data_map;
        ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr);

        ahd->init_level++;

        /* Allocate SCB data now that buffer_dmat is initialized */
        if (ahd_init_scbdata(ahd) != 0)
                return (ENOMEM);

        if ((ahd->flags & AHD_INITIATORROLE) == 0)
                ahd->flags &= ~AHD_RESET_BUS_A;

        /*
         * Before committing these settings to the chip, give
         * the OSM one last chance to modify our configuration.
         */
        ahd_platform_init(ahd);

        /* Bring up the chip. */
        ahd_chip_init(ahd);

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);

        if ((ahd->flags & AHD_CURRENT_SENSING) == 0)
                goto init_done;

        /*
         * Verify termination based on current draw and
         * warn user if the bus is over/under terminated.
         */
        error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL,
                                   CURSENSE_ENB);
        if (error != 0) {
                printk("%s: current sensing timeout 1\n", ahd_name(ahd));
                goto init_done;
        }
        for (i = 20, fstat = FLX_FSTAT_BUSY;
             (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) {
                error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat);
                if (error != 0) {
                        printk("%s: current sensing timeout 2\n",
                               ahd_name(ahd));
                        goto init_done;
                }
        }
        if (i == 0) {
                printk("%s: Timedout during current-sensing test\n",
                       ahd_name(ahd));
                goto init_done;
        }

        /* Latch Current Sensing status. */
        error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, &current_sensing);
        if (error != 0) {
                printk("%s: current sensing timeout 3\n", ahd_name(ahd));
                goto init_done;
        }

        /* Diable current sensing. */
        ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) {
                printk("%s: current_sensing == 0x%x\n",
                       ahd_name(ahd), current_sensing);
        }
#endif
        warn_user = 0;
        for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) {
                u_int term_stat;

                term_stat = (current_sensing & FLX_CSTAT_MASK);
                switch (term_stat) {
                case FLX_CSTAT_OVER:
                case FLX_CSTAT_UNDER:
                        warn_user++;
                        fallthrough;
                case FLX_CSTAT_INVALID:
                case FLX_CSTAT_OKAY:
                        if (warn_user == 0 && bootverbose == 0)
                                break;
                        printk("%s: %s Channel %s\n", ahd_name(ahd),
                               channel_strings[i], termstat_strings[term_stat]);
                        break;
                }
        }
        if (warn_user) {
                printk("%s: WARNING. Termination is not configured correctly.\n"
                       "%s: WARNING. SCSI bus operations may FAIL.\n",
                       ahd_name(ahd), ahd_name(ahd));
        }
init_done:
        ahd_restart(ahd);
        ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US);
        return (0);
}

/*
 * (Re)initialize chip state after a chip reset.
 */
static void
ahd_chip_init(struct ahd_softc *ahd)
{
        uint32_t busaddr;
        u_int    sxfrctl1;
        u_int    scsiseq_template;
        u_int    wait;
        u_int    i;
        u_int    target;

        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        /*
         * Take the LED out of diagnostic mode
         */
        ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON));

        /*
         * Return HS_MAILBOX to its default value.
         */
        ahd->hs_mailbox = 0;
        ahd_outb(ahd, HS_MAILBOX, 0);

        /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */
        ahd_outb(ahd, IOWNID, ahd->our_id);
        ahd_outb(ahd, TOWNID, ahd->our_id);
        sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0;
        sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0;
        if ((ahd->bugs & AHD_LONG_SETIMO_BUG)
         && (ahd->seltime != STIMESEL_MIN)) {
                /*
                 * The selection timer duration is twice as long
                 * as it should be.  Halve it by adding "1" to
                 * the user specified setting.
                 */
                sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ;
        } else {
                sxfrctl1 |= ahd->seltime;
        }

        ahd_outb(ahd, SXFRCTL0, DFON);
        ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN);
        ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);

        /*
         * Now that termination is set, wait for up
         * to 500ms for our transceivers to settle.  If
         * the adapter does not have a cable attached,
         * the transceivers may never settle, so don't
         * complain if we fail here.
         */
        for (wait = 10000;
             (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
             wait--)
                ahd_delay(100);

        /* Clear any false bus resets due to the transceivers settling */
        ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
        ahd_outb(ahd, CLRINT, CLRSCSIINT);

        /* Initialize mode specific S/G state. */
        for (i = 0; i < 2; i++) {
                ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
                ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
                ahd_outb(ahd, SG_STATE, 0);
                ahd_outb(ahd, CLRSEQINTSRC, 0xFF);
                ahd_outb(ahd, SEQIMODE,
                         ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT
                        |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD);
        }

        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
        ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN);
        ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75);
        ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN);
        ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR);
        if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
                ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE);
        } else {
                ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE);
        }
        ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS);
        if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX)
                /*
                 * Do not issue a target abort when a split completion
                 * error occurs.  Let our PCIX interrupt handler deal
                 * with it instead. H2A4 Razor #625
                 */
                ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS);

        if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0)
                ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER);

        /*
         * Tweak IOCELL settings.
         */
        if ((ahd->flags & AHD_HP_BOARD) != 0) {
                for (i = 0; i < NUMDSPS; i++) {
                        ahd_outb(ahd, DSPSELECT, i);
                        ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT);
                }
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MISC) != 0)
                        printk("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd),
                               WRTBIASCTL_HP_DEFAULT);
#endif
        }
        ahd_setup_iocell_workaround(ahd);

        /*
         * Enable LQI Manager interrupts.
         */
        ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT
                              | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI
                              | ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
        ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
        /*
         * We choose to have the sequencer catch LQOPHCHGINPKT errors
         * manually for the command phase at the start of a packetized
         * selection case.  ENLQOBUSFREE should be made redundant by
         * the BUSFREE interrupt, but it seems that some LQOBUSFREE
         * events fail to assert the BUSFREE interrupt so we must
         * also enable LQOBUSFREE interrupts.
         */
        ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE);

        /*
         * Setup sequencer interrupt handlers.
         */
        ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr));
        ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr));

        /*
         * Setup SCB Offset registers.
         */
        if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
                ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb,
                         pkt_long_lun));
        } else {
                ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun));
        }
        ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len));
        ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute));
        ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management));
        ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb,
                                       shared_data.idata.cdb));
        ahd_outb(ahd, QNEXTPTR,
                 offsetof(struct hardware_scb, next_hscb_busaddr));
        ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET);
        ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control));
        if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
                ahd_outb(ahd, LUNLEN,
                         sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1);
        } else {
                ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN);
        }
        ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1);
        ahd_outb(ahd, MAXCMD, 0xFF);
        ahd_outb(ahd, SCBAUTOPTR,
                 AUSCBPTR_EN | offsetof(struct hardware_scb, tag));

        /* We haven't been enabled for target mode yet. */
        ahd_outb(ahd, MULTARGID, 0);
        ahd_outb(ahd, MULTARGID + 1, 0);

        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        /* Initialize the negotiation table. */
        if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) {
                /*
                 * Clear the spare bytes in the neg table to avoid
                 * spurious parity errors.
                 */
                for (target = 0; target < AHD_NUM_TARGETS; target++) {
                        ahd_outb(ahd, NEGOADDR, target);
                        ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0);
                        for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++)
                                ahd_outb(ahd, ANNEXDAT, 0);
                }
        }
        for (target = 0; target < AHD_NUM_TARGETS; target++) {
                struct   ahd_devinfo devinfo;
                struct   ahd_initiator_tinfo *tinfo;
                struct   ahd_tmode_tstate *tstate;

                tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
                                            target, &tstate);
                ahd_compile_devinfo(&devinfo, ahd->our_id,
                                    target, CAM_LUN_WILDCARD,
                                    'A', ROLE_INITIATOR);
                ahd_update_neg_table(ahd, &devinfo, &tinfo->curr);
        }

        ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR);
        ahd_outb(ahd, CLRINT, CLRSCSIINT);

#ifdef NEEDS_MORE_TESTING
        /*
         * Always enable abort on incoming L_Qs if this feature is
         * supported.  We use this to catch invalid SCB references.
         */
        if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0)
                ahd_outb(ahd, LQCTL1, ABORTPENDING);
        else
#endif
                ahd_outb(ahd, LQCTL1, 0);

        /* All of our queues are empty */
        ahd->qoutfifonext = 0;
        ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID;
        ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID);
        for (i = 0; i < AHD_QOUT_SIZE; i++)
                ahd->qoutfifo[i].valid_tag = 0;
        ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD);

        ahd->qinfifonext = 0;
        for (i = 0; i < AHD_QIN_SIZE; i++)
                ahd->qinfifo[i] = SCB_LIST_NULL;

        if ((ahd->features & AHD_TARGETMODE) != 0) {
                /* All target command blocks start out invalid. */
                for (i = 0; i < AHD_TMODE_CMDS; i++)
                        ahd->targetcmds[i].cmd_valid = 0;
                ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD);
                ahd->tqinfifonext = 1;
                ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1);
                ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
        }

        /* Initialize Scratch Ram. */
        ahd_outb(ahd, SEQ_FLAGS, 0);
        ahd_outb(ahd, SEQ_FLAGS2, 0);

        /* We don't have any waiting selections */
        ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
        ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
        ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL);
        ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF);
        for (i = 0; i < AHD_NUM_TARGETS; i++)
                ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);

        /*
         * Nobody is waiting to be DMAed into the QOUTFIFO.
         */
        ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
        ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL);
        ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
        ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
        ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);

        /*
         * The Freeze Count is 0.
         */
        ahd->qfreeze_cnt = 0;
        ahd_outw(ahd, QFREEZE_COUNT, 0);
        ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0);

        /*
         * Tell the sequencer where it can find our arrays in memory.
         */
        busaddr = ahd->shared_data_map.physaddr;
        ahd_outl(ahd, SHARED_DATA_ADDR, busaddr);
        ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr);

        /*
         * Setup the allowed SCSI Sequences based on operational mode.
         * If we are a target, we'll enable select in operations once
         * we've had a lun enabled.
         */
        scsiseq_template = ENAUTOATNP;
        if ((ahd->flags & AHD_INITIATORROLE) != 0)
                scsiseq_template |= ENRSELI;
        ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template);

        /* There are no busy SCBs yet. */
        for (target = 0; target < AHD_NUM_TARGETS; target++) {
                int lun;

                for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++)
                        ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun));
        }

        /*
         * Initialize the group code to command length table.
         * Vendor Unique codes are set to 0 so we only capture
         * the first byte of the cdb.  These can be overridden
         * when target mode is enabled.
         */
        ahd_outb(ahd, CMDSIZE_TABLE, 5);
        ahd_outb(ahd, CMDSIZE_TABLE + 1, 9);
        ahd_outb(ahd, CMDSIZE_TABLE + 2, 9);
        ahd_outb(ahd, CMDSIZE_TABLE + 3, 0);
        ahd_outb(ahd, CMDSIZE_TABLE + 4, 15);
        ahd_outb(ahd, CMDSIZE_TABLE + 5, 11);
        ahd_outb(ahd, CMDSIZE_TABLE + 6, 0);
        ahd_outb(ahd, CMDSIZE_TABLE + 7, 0);

        /* Tell the sequencer of our initial queue positions */
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
        ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512);
        ahd->qinfifonext = 0;
        ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
        ahd_set_hescb_qoff(ahd, 0);
        ahd_set_snscb_qoff(ahd, 0);
        ahd_set_sescb_qoff(ahd, 0);
        ahd_set_sdscb_qoff(ahd, 0);

        /*
         * Tell the sequencer which SCB will be the next one it receives.
         */
        busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
        ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);

        /*
         * Default to coalescing disabled.
         */
        ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0);
        ahd_outw(ahd, CMDS_PENDING, 0);
        ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer,
                                     ahd->int_coalescing_maxcmds,
                                     ahd->int_coalescing_mincmds);
        ahd_enable_coalescing(ahd, FALSE);

        ahd_loadseq(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
                u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);

                negodat3 |= ENSLOWCRC;
                ahd_outb(ahd, NEGCONOPTS, negodat3);
                negodat3 = ahd_inb(ahd, NEGCONOPTS);
                if (!(negodat3 & ENSLOWCRC))
                        printk("aic79xx: failed to set the SLOWCRC bit\n");
                else
                        printk("aic79xx: SLOWCRC bit set\n");
        }
}

/*
 * Setup default device and controller settings.
 * This should only be called if our probe has
 * determined that no configuration data is available.
 */
int
ahd_default_config(struct ahd_softc *ahd)
{
        int     targ;

        ahd->our_id = 7;

        /*
         * Allocate a tstate to house information for our
         * initiator presence on the bus as well as the user
         * data for any target mode initiator.
         */
        if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
                printk("%s: unable to allocate ahd_tmode_tstate.  "
                       "Failing attach\n", ahd_name(ahd));
                return (ENOMEM);
        }

        for (targ = 0; targ < AHD_NUM_TARGETS; targ++) {
                struct   ahd_devinfo devinfo;
                struct   ahd_initiator_tinfo *tinfo;
                struct   ahd_tmode_tstate *tstate;
                uint16_t target_mask;

                tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
                                            targ, &tstate);
                /*
                 * We support SPC2 and SPI4.
                 */
                tinfo->user.protocol_version = 4;
                tinfo->user.transport_version = 4;

                target_mask = 0x01 << targ;
                ahd->user_discenable |= target_mask;
                tstate->discenable |= target_mask;
                ahd->user_tagenable |= target_mask;
#ifdef AHD_FORCE_160
                tinfo->user.period = AHD_SYNCRATE_DT;
#else
                tinfo->user.period = AHD_SYNCRATE_160;
#endif
                tinfo->user.offset = MAX_OFFSET;
                tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM
                                        | MSG_EXT_PPR_WR_FLOW
                                        | MSG_EXT_PPR_HOLD_MCS
                                        | MSG_EXT_PPR_IU_REQ
                                        | MSG_EXT_PPR_QAS_REQ
                                        | MSG_EXT_PPR_DT_REQ;
                if ((ahd->features & AHD_RTI) != 0)
                        tinfo->user.ppr_options |= MSG_EXT_PPR_RTI;

                tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;

                /*
                 * Start out Async/Narrow/Untagged and with
                 * conservative protocol support.
                 */
                tinfo->goal.protocol_version = 2;
                tinfo->goal.transport_version = 2;
                tinfo->curr.protocol_version = 2;
                tinfo->curr.transport_version = 2;
                ahd_compile_devinfo(&devinfo, ahd->our_id,
                                    targ, CAM_LUN_WILDCARD,
                                    'A', ROLE_INITIATOR);
                tstate->tagenable &= ~target_mask;
                ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                              AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
                ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
                                 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
                                 /*paused*/TRUE);
        }
        return (0);
}

/*
 * Parse device configuration information.
 */
int
ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc)
{
        int targ;
        int max_targ;

        max_targ = sc->max_targets & CFMAXTARG;
        ahd->our_id = sc->brtime_id & CFSCSIID;

        /*
         * Allocate a tstate to house information for our
         * initiator presence on the bus as well as the user
         * data for any target mode initiator.
         */
        if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
                printk("%s: unable to allocate ahd_tmode_tstate.  "
                       "Failing attach\n", ahd_name(ahd));
                return (ENOMEM);
        }

        for (targ = 0; targ < max_targ; targ++) {
                struct   ahd_devinfo devinfo;
                struct   ahd_initiator_tinfo *tinfo;
                struct   ahd_transinfo *user_tinfo;
                struct   ahd_tmode_tstate *tstate;
                uint16_t target_mask;

                tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
                                            targ, &tstate);
                user_tinfo = &tinfo->user;

                /*
                 * We support SPC2 and SPI4.
                 */
                tinfo->user.protocol_version = 4;
                tinfo->user.transport_version = 4;

                target_mask = 0x01 << targ;
                ahd->user_discenable &= ~target_mask;
                tstate->discenable &= ~target_mask;
                ahd->user_tagenable &= ~target_mask;
                if (sc->device_flags[targ] & CFDISC) {
                        tstate->discenable |= target_mask;
                        ahd->user_discenable |= target_mask;
                        ahd->user_tagenable |= target_mask;
                } else {
                        /*
                         * Cannot be packetized without disconnection.
                         */
                        sc->device_flags[targ] &= ~CFPACKETIZED;
                }

                user_tinfo->ppr_options = 0;
                user_tinfo->period = (sc->device_flags[targ] & CFXFER);
                if (user_tinfo->period < CFXFER_ASYNC) {
                        if (user_tinfo->period <= AHD_PERIOD_10MHz)
                                user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ;
                        user_tinfo->offset = MAX_OFFSET;
                } else  {
                        user_tinfo->offset = 0;
                        user_tinfo->period = AHD_ASYNC_XFER_PERIOD;
                }
#ifdef AHD_FORCE_160
                if (user_tinfo->period <= AHD_SYNCRATE_160)
                        user_tinfo->period = AHD_SYNCRATE_DT;
#endif

                if ((sc->device_flags[targ] & CFPACKETIZED) != 0) {
                        user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM
                                                |  MSG_EXT_PPR_WR_FLOW
                                                |  MSG_EXT_PPR_HOLD_MCS
                                                |  MSG_EXT_PPR_IU_REQ;
                        if ((ahd->features & AHD_RTI) != 0)
                                user_tinfo->ppr_options |= MSG_EXT_PPR_RTI;
                }

                if ((sc->device_flags[targ] & CFQAS) != 0)
                        user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ;

                if ((sc->device_flags[targ] & CFWIDEB) != 0)
                        user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT;
                else
                        user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT;
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_MISC) != 0)
                        printk("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width,
                               user_tinfo->period, user_tinfo->offset,
                               user_tinfo->ppr_options);
#endif
                /*
                 * Start out Async/Narrow/Untagged and with
                 * conservative protocol support.
                 */
                tstate->tagenable &= ~target_mask;
                tinfo->goal.protocol_version = 2;
                tinfo->goal.transport_version = 2;
                tinfo->curr.protocol_version = 2;
                tinfo->curr.transport_version = 2;
                ahd_compile_devinfo(&devinfo, ahd->our_id,
                                    targ, CAM_LUN_WILDCARD,
                                    'A', ROLE_INITIATOR);
                ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                              AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
                ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
                                 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
                                 /*paused*/TRUE);
        }

        ahd->flags &= ~AHD_SPCHK_ENB_A;
        if (sc->bios_control & CFSPARITY)
                ahd->flags |= AHD_SPCHK_ENB_A;

        ahd->flags &= ~AHD_RESET_BUS_A;
        if (sc->bios_control & CFRESETB)
                ahd->flags |= AHD_RESET_BUS_A;

        ahd->flags &= ~AHD_EXTENDED_TRANS_A;
        if (sc->bios_control & CFEXTEND)
                ahd->flags |= AHD_EXTENDED_TRANS_A;

        ahd->flags &= ~AHD_BIOS_ENABLED;
        if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED)
                ahd->flags |= AHD_BIOS_ENABLED;

        ahd->flags &= ~AHD_STPWLEVEL_A;
        if ((sc->adapter_control & CFSTPWLEVEL) != 0)
                ahd->flags |= AHD_STPWLEVEL_A;

        return (0);
}

/*
 * Parse device configuration information.
 */
int
ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd)
{
        int error;

        error = ahd_verify_vpd_cksum(vpd);
        if (error == 0)
                return (EINVAL);
        if ((vpd->bios_flags & VPDBOOTHOST) != 0)
                ahd->flags |= AHD_BOOT_CHANNEL;
        return (0);
}

void
ahd_intr_enable(struct ahd_softc *ahd, int enable)
{
        u_int hcntrl;

        hcntrl = ahd_inb(ahd, HCNTRL);
        hcntrl &= ~INTEN;
        ahd->pause &= ~INTEN;
        ahd->unpause &= ~INTEN;
        if (enable) {
                hcntrl |= INTEN;
                ahd->pause |= INTEN;
                ahd->unpause |= INTEN;
        }
        ahd_outb(ahd, HCNTRL, hcntrl);
}

static void
ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds,
                             u_int mincmds)
{
        if (timer > AHD_TIMER_MAX_US)
                timer = AHD_TIMER_MAX_US;
        ahd->int_coalescing_timer = timer;

        if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX)
                maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX;
        if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX)
                mincmds = AHD_INT_COALESCING_MINCMDS_MAX;
        ahd->int_coalescing_maxcmds = maxcmds;
        ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK);
        ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds);
        ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds);
}

static void
ahd_enable_coalescing(struct ahd_softc *ahd, int enable)
{

        ahd->hs_mailbox &= ~ENINT_COALESCE;
        if (enable)
                ahd->hs_mailbox |= ENINT_COALESCE;
        ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox);
        ahd_flush_device_writes(ahd);
        ahd_run_qoutfifo(ahd);
}

/*
 * Ensure that the card is paused in a location
 * outside of all critical sections and that all
 * pending work is completed prior to returning.
 * This routine should only be called from outside
 * an interrupt context.
 */
void
ahd_pause_and_flushwork(struct ahd_softc *ahd)
{
        u_int intstat;
        u_int maxloops;

        maxloops = 1000;
        ahd->flags |= AHD_ALL_INTERRUPTS;
        ahd_pause(ahd);
        /*
         * Freeze the outgoing selections.  We do this only
         * until we are safely paused without further selections
         * pending.
         */
        ahd->qfreeze_cnt--;
        ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
        ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN);
        do {

                ahd_unpause(ahd);
                /*
                 * Give the sequencer some time to service
                 * any active selections.
                 */
                ahd_delay(500);

                ahd_intr(ahd);
                ahd_pause(ahd);
                intstat = ahd_inb(ahd, INTSTAT);
                if ((intstat & INT_PEND) == 0) {
                        ahd_clear_critical_section(ahd);
                        intstat = ahd_inb(ahd, INTSTAT);
                }
        } while (--maxloops
              && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0)
              && ((intstat & INT_PEND) != 0
               || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
               || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0));

        if (maxloops == 0) {
                printk("Infinite interrupt loop, INTSTAT = %x",
                      ahd_inb(ahd, INTSTAT));
        }
        ahd->qfreeze_cnt++;
        ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);

        ahd_flush_qoutfifo(ahd);

        ahd->flags &= ~AHD_ALL_INTERRUPTS;
}

int __maybe_unused
ahd_suspend(struct ahd_softc *ahd)
{
        ahd_pause_and_flushwork(ahd);

        if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
                ahd_unpause(ahd);
                return (EBUSY);
        }
        ahd_shutdown(ahd);
        return (0);
}

void __maybe_unused
ahd_resume(struct ahd_softc *ahd)
{
        ahd_reset(ahd, /*reinit*/TRUE);
        ahd_intr_enable(ahd, TRUE);
        ahd_restart(ahd);
}

/************************** Busy Target Table *********************************/
/*
 * Set SCBPTR to the SCB that contains the busy
 * table entry for TCL.  Return the offset into
 * the SCB that contains the entry for TCL.
 * saved_scbid is dereferenced and set to the
 * scbid that should be restored once manipualtion
 * of the TCL entry is complete.
 */
static inline u_int
ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl)
{
        /*
         * Index to the SCB that contains the busy entry.
         */
        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        *saved_scbid = ahd_get_scbptr(ahd);
        ahd_set_scbptr(ahd, TCL_LUN(tcl)
                     | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4));

        /*
         * And now calculate the SCB offset to the entry.
         * Each entry is 2 bytes wide, hence the
         * multiplication by 2.
         */
        return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS);
}

/*
 * Return the untagged transaction id for a given target/channel lun.
 */
static u_int
ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl)
{
        u_int scbid;
        u_int scb_offset;
        u_int saved_scbptr;

        scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
        scbid = ahd_inw_scbram(ahd, scb_offset);
        ahd_set_scbptr(ahd, saved_scbptr);
        return (scbid);
}

static void
ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid)
{
        u_int scb_offset;
        u_int saved_scbptr;

        scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
        ahd_outw(ahd, scb_offset, scbid);
        ahd_set_scbptr(ahd, saved_scbptr);
}

/************************** SCB and SCB queue management **********************/
static int
ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
              char channel, int lun, u_int tag, role_t role)
{
        int targ = SCB_GET_TARGET(ahd, scb);
        char chan = SCB_GET_CHANNEL(ahd, scb);
        int slun = SCB_GET_LUN(scb);
        int match;

        match = ((chan == channel) || (channel == ALL_CHANNELS));
        if (match != 0)
                match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
        if (match != 0)
                match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
        if (match != 0) {
#ifdef AHD_TARGET_MODE
                int group;

                group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
                if (role == ROLE_INITIATOR) {
                        match = (group != XPT_FC_GROUP_TMODE)
                              && ((tag == SCB_GET_TAG(scb))
                               || (tag == SCB_LIST_NULL));
                } else if (role == ROLE_TARGET) {
                        match = (group == XPT_FC_GROUP_TMODE)
                              && ((tag == scb->io_ctx->csio.tag_id)
                               || (tag == SCB_LIST_NULL));
                }
#else /* !AHD_TARGET_MODE */
                match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL));
#endif /* AHD_TARGET_MODE */
        }

        return match;
}

static void
ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
{
        int     target;
        char    channel;
        int     lun;

        target = SCB_GET_TARGET(ahd, scb);
        lun = SCB_GET_LUN(scb);
        channel = SCB_GET_CHANNEL(ahd, scb);

        ahd_search_qinfifo(ahd, target, channel, lun,
                           /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
                           CAM_REQUEUE_REQ, SEARCH_COMPLETE);

        ahd_platform_freeze_devq(ahd, scb);
}

void
ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb)
{
        struct scb      *prev_scb;
        ahd_mode_state   saved_modes;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
        prev_scb = NULL;
        if (ahd_qinfifo_count(ahd) != 0) {
                u_int prev_tag;
                u_int prev_pos;

                prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1);
                prev_tag = ahd->qinfifo[prev_pos];
                prev_scb = ahd_lookup_scb(ahd, prev_tag);
        }
        ahd_qinfifo_requeue(ahd, prev_scb, scb);
        ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
        ahd_restore_modes(ahd, saved_modes);
}

static void
ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb,
                    struct scb *scb)
{
        if (prev_scb == NULL) {
                uint32_t busaddr;

                busaddr = ahd_le32toh(scb->hscb->hscb_busaddr);
                ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
        } else {
                prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
                ahd_sync_scb(ahd, prev_scb,
                             BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
        }
        ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
        ahd->qinfifonext++;
        scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr;
        ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
}

static int
ahd_qinfifo_count(struct ahd_softc *ahd)
{
        u_int qinpos;
        u_int wrap_qinpos;
        u_int wrap_qinfifonext;

        AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
        qinpos = ahd_get_snscb_qoff(ahd);
        wrap_qinpos = AHD_QIN_WRAP(qinpos);
        wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext);
        if (wrap_qinfifonext >= wrap_qinpos)
                return (wrap_qinfifonext - wrap_qinpos);
        else
                return (wrap_qinfifonext
                      + ARRAY_SIZE(ahd->qinfifo) - wrap_qinpos);
}

static void
ahd_reset_cmds_pending(struct ahd_softc *ahd)
{
        struct          scb *scb;
        ahd_mode_state  saved_modes;
        u_int           pending_cmds;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);

        /*
         * Don't count any commands as outstanding that the
         * sequencer has already marked for completion.
         */
        ahd_flush_qoutfifo(ahd);

        pending_cmds = 0;
        LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
                pending_cmds++;
        }
        ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd));
        ahd_restore_modes(ahd, saved_modes);
        ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
}

static void
ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
{
        cam_status ostat;
        cam_status cstat;

        ostat = ahd_get_transaction_status(scb);
        if (ostat == CAM_REQ_INPROG)
                ahd_set_transaction_status(scb, status);
        cstat = ahd_get_transaction_status(scb);
        if (cstat != CAM_REQ_CMP)
                ahd_freeze_scb(scb);
        ahd_done(ahd, scb);
}

int
ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
                   int lun, u_int tag, role_t role, uint32_t status,
                   ahd_search_action action)
{
        struct scb      *scb;
        struct scb      *mk_msg_scb;
        struct scb      *prev_scb;
        ahd_mode_state   saved_modes;
        u_int            qinstart;
        u_int            qinpos;
        u_int            qintail;
        u_int            tid_next;
        u_int            tid_prev;
        u_int            scbid;
        u_int            seq_flags2;
        u_int            savedscbptr;
        uint32_t         busaddr;
        int              found;
        int              targets;

        /* Must be in CCHAN mode */
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);

        /*
         * Halt any pending SCB DMA.  The sequencer will reinitiate
         * this dma if the qinfifo is not empty once we unpause.
         */
        if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR))
         == (CCARREN|CCSCBEN|CCSCBDIR)) {
                ahd_outb(ahd, CCSCBCTL,
                         ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN));
                while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0)
                        ;
        }
        /* Determine sequencer's position in the qinfifo. */
        qintail = AHD_QIN_WRAP(ahd->qinfifonext);
        qinstart = ahd_get_snscb_qoff(ahd);
        qinpos = AHD_QIN_WRAP(qinstart);
        found = 0;
        prev_scb = NULL;

        if (action == SEARCH_PRINT) {
                printk("qinstart = %d qinfifonext = %d\nQINFIFO:",
                       qinstart, ahd->qinfifonext);
        }

        /*
         * Start with an empty queue.  Entries that are not chosen
         * for removal will be re-added to the queue as we go.
         */
        ahd->qinfifonext = qinstart;
        busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
        ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);

        while (qinpos != qintail) {
                scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]);
                if (scb == NULL) {
                        printk("qinpos = %d, SCB index = %d\n",
                                qinpos, ahd->qinfifo[qinpos]);
                        panic("Loop 1\n");
                }

                if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) {
                        /*
                         * We found an scb that needs to be acted on.
                         */
                        found++;
                        switch (action) {
                        case SEARCH_COMPLETE:
                                if ((scb->flags & SCB_ACTIVE) == 0)
                                        printk("Inactive SCB in qinfifo\n");
                                ahd_done_with_status(ahd, scb, status);
                                fallthrough;
                        case SEARCH_REMOVE:
                                break;
                        case SEARCH_PRINT:
                                printk(" 0x%x", ahd->qinfifo[qinpos]);
                                fallthrough;
                        case SEARCH_COUNT:
                                ahd_qinfifo_requeue(ahd, prev_scb, scb);
                                prev_scb = scb;
                                break;
                        }
                } else {
                        ahd_qinfifo_requeue(ahd, prev_scb, scb);
                        prev_scb = scb;
                }
                qinpos = AHD_QIN_WRAP(qinpos+1);
        }

        ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);

        if (action == SEARCH_PRINT)
                printk("\nWAITING_TID_QUEUES:\n");

        /*
         * Search waiting for selection lists.  We traverse the
         * list of "their ids" waiting for selection and, if
         * appropriate, traverse the SCBs of each "their id"
         * looking for matches.
         */
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2);
        if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) {
                scbid = ahd_inw(ahd, MK_MESSAGE_SCB);
                mk_msg_scb = ahd_lookup_scb(ahd, scbid);
        } else
                mk_msg_scb = NULL;
        savedscbptr = ahd_get_scbptr(ahd);
        tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
        tid_prev = SCB_LIST_NULL;
        targets = 0;
        for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
                u_int tid_head;
                u_int tid_tail;

                targets++;
                if (targets > AHD_NUM_TARGETS)
                        panic("TID LIST LOOP");

                if (scbid >= ahd->scb_data.numscbs) {
                        printk("%s: Waiting TID List inconsistency. "
                               "SCB index == 0x%x, yet numscbs == 0x%x.",
                               ahd_name(ahd), scbid, ahd->scb_data.numscbs);
                        ahd_dump_card_state(ahd);
                        panic("for safety");
                }
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: SCB = 0x%x Not Active!\n",
                               ahd_name(ahd), scbid);
                        panic("Waiting TID List traversal\n");
                }
                ahd_set_scbptr(ahd, scbid);
                tid_next = ahd_inw_scbram(ahd, SCB_NEXT2);
                if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
                                  SCB_LIST_NULL, ROLE_UNKNOWN) == 0) {
                        tid_prev = scbid;
                        continue;
                }

                /*
                 * We found a list of scbs that needs to be searched.
                 */
                if (action == SEARCH_PRINT)
                        printk("       %d ( ", SCB_GET_TARGET(ahd, scb));
                tid_head = scbid;
                found += ahd_search_scb_list(ahd, target, channel,
                                             lun, tag, role, status,
                                             action, &tid_head, &tid_tail,
                                             SCB_GET_TARGET(ahd, scb));
                /*
                 * Check any MK_MESSAGE SCB that is still waiting to
                 * enter this target's waiting for selection queue.
                 */
                if (mk_msg_scb != NULL
                 && ahd_match_scb(ahd, mk_msg_scb, target, channel,
                                  lun, tag, role)) {

                        /*
                         * We found an scb that needs to be acted on.
                         */
                        found++;
                        switch (action) {
                        case SEARCH_COMPLETE:
                                if ((mk_msg_scb->flags & SCB_ACTIVE) == 0)
                                        printk("Inactive SCB pending MK_MSG\n");
                                ahd_done_with_status(ahd, mk_msg_scb, status);
                                fallthrough;
                        case SEARCH_REMOVE:
                        {
                                u_int tail_offset;

                                printk("Removing MK_MSG scb\n");

                                /*
                                 * Reset our tail to the tail of the
                                 * main per-target list.
                                 */
                                tail_offset = WAITING_SCB_TAILS
                                    + (2 * SCB_GET_TARGET(ahd, mk_msg_scb));
                                ahd_outw(ahd, tail_offset, tid_tail);

                                seq_flags2 &= ~PENDING_MK_MESSAGE;
                                ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
                                ahd_outw(ahd, CMDS_PENDING,
                                         ahd_inw(ahd, CMDS_PENDING)-1);
                                mk_msg_scb = NULL;
                                break;
                        }
                        case SEARCH_PRINT:
                                printk(" 0x%x", SCB_GET_TAG(scb));
                                fallthrough;
                        case SEARCH_COUNT:
                                break;
                        }
                }

                if (mk_msg_scb != NULL
                 && SCBID_IS_NULL(tid_head)
                 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
                                  SCB_LIST_NULL, ROLE_UNKNOWN)) {

                        /*
                         * When removing the last SCB for a target
                         * queue with a pending MK_MESSAGE scb, we
                         * must queue the MK_MESSAGE scb.
                         */
                        printk("Queueing mk_msg_scb\n");
                        tid_head = ahd_inw(ahd, MK_MESSAGE_SCB);
                        seq_flags2 &= ~PENDING_MK_MESSAGE;
                        ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
                        mk_msg_scb = NULL;
                }
                if (tid_head != scbid)
                        ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
                if (!SCBID_IS_NULL(tid_head))
                        tid_prev = tid_head;
                if (action == SEARCH_PRINT)
                        printk(")\n");
        }

        /* Restore saved state. */
        ahd_set_scbptr(ahd, savedscbptr);
        ahd_restore_modes(ahd, saved_modes);
        return (found);
}

static int
ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
                    int lun, u_int tag, role_t role, uint32_t status,
                    ahd_search_action action, u_int *list_head,
                    u_int *list_tail, u_int tid)
{
        struct  scb *scb;
        u_int   scbid;
        u_int   next;
        u_int   prev;
        int     found;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        found = 0;
        prev = SCB_LIST_NULL;
        next = *list_head;
        *list_tail = SCB_LIST_NULL;
        for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
                if (scbid >= ahd->scb_data.numscbs) {
                        printk("%s:SCB List inconsistency. "
                               "SCB == 0x%x, yet numscbs == 0x%x.",
                               ahd_name(ahd), scbid, ahd->scb_data.numscbs);
                        ahd_dump_card_state(ahd);
                        panic("for safety");
                }
                scb = ahd_lookup_scb(ahd, scbid);
                if (scb == NULL) {
                        printk("%s: SCB = %d Not Active!\n",
                               ahd_name(ahd), scbid);
                        panic("Waiting List traversal\n");
                }
                ahd_set_scbptr(ahd, scbid);
                *list_tail = scbid;
                next = ahd_inw_scbram(ahd, SCB_NEXT);
                if (ahd_match_scb(ahd, scb, target, channel,
                                  lun, SCB_LIST_NULL, role) == 0) {
                        prev = scbid;
                        continue;
                }
                found++;
                switch (action) {
                case SEARCH_COMPLETE:
                        if ((scb->flags & SCB_ACTIVE) == 0)
                                printk("Inactive SCB in Waiting List\n");
                        ahd_done_with_status(ahd, scb, status);
                        fallthrough;
                case SEARCH_REMOVE:
                        ahd_rem_wscb(ahd, scbid, prev, next, tid);
                        *list_tail = prev;
                        if (SCBID_IS_NULL(prev))
                                *list_head = next;
                        break;
                case SEARCH_PRINT:
                        printk("0x%x ", scbid);
                        fallthrough;
                case SEARCH_COUNT:
                        prev = scbid;
                        break;
                }
                if (found > AHD_SCB_MAX)
                        panic("SCB LIST LOOP");
        }
        if (action == SEARCH_COMPLETE
         || action == SEARCH_REMOVE)
                ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found);
        return (found);
}

static void
ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev,
                    u_int tid_cur, u_int tid_next)
{
        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);

        if (SCBID_IS_NULL(tid_cur)) {

                /* Bypass current TID list */
                if (SCBID_IS_NULL(tid_prev)) {
                        ahd_outw(ahd, WAITING_TID_HEAD, tid_next);
                } else {
                        ahd_set_scbptr(ahd, tid_prev);
                        ahd_outw(ahd, SCB_NEXT2, tid_next);
                }
                if (SCBID_IS_NULL(tid_next))
                        ahd_outw(ahd, WAITING_TID_TAIL, tid_prev);
        } else {

                /* Stitch through tid_cur */
                if (SCBID_IS_NULL(tid_prev)) {
                        ahd_outw(ahd, WAITING_TID_HEAD, tid_cur);
                } else {
                        ahd_set_scbptr(ahd, tid_prev);
                        ahd_outw(ahd, SCB_NEXT2, tid_cur);
                }
                ahd_set_scbptr(ahd, tid_cur);
                ahd_outw(ahd, SCB_NEXT2, tid_next);

                if (SCBID_IS_NULL(tid_next))
                        ahd_outw(ahd, WAITING_TID_TAIL, tid_cur);
        }
}

/*
 * Manipulate the waiting for selection list and return the
 * scb that follows the one that we remove.
 */
static u_int
ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
             u_int prev, u_int next, u_int tid)
{
        u_int tail_offset;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        if (!SCBID_IS_NULL(prev)) {
                ahd_set_scbptr(ahd, prev);
                ahd_outw(ahd, SCB_NEXT, next);
        }

        /*
         * SCBs that have MK_MESSAGE set in them may
         * cause the tail pointer to be updated without
         * setting the next pointer of the previous tail.
         * Only clear the tail if the removed SCB was
         * the tail.
         */
        tail_offset = WAITING_SCB_TAILS + (2 * tid);
        if (SCBID_IS_NULL(next)
         && ahd_inw(ahd, tail_offset) == scbid)
                ahd_outw(ahd, tail_offset, prev);

        ahd_add_scb_to_free_list(ahd, scbid);
        return (next);
}

/*
 * Add the SCB as selected by SCBPTR onto the on chip list of
 * free hardware SCBs.  This list is empty/unused if we are not
 * performing SCB paging.
 */
static void
ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid)
{
/* XXX Need some other mechanism to designate "free". */
        /*
         * Invalidate the tag so that our abort
         * routines don't think it's active.
        ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL);
         */
}

/******************************** Error Handling ******************************/
/*
 * Abort all SCBs that match the given description (target/channel/lun/tag),
 * setting their status to the passed in status if the status has not already
 * been modified from CAM_REQ_INPROG.  This routine assumes that the sequencer
 * is paused before it is called.
 */
static int
ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel,
               int lun, u_int tag, role_t role, uint32_t status)
{
        struct          scb *scbp;
        struct          scb *scbp_next;
        u_int           i, j;
        u_int           maxtarget;
        u_int           minlun;
        u_int           maxlun;
        int             found;
        ahd_mode_state  saved_modes;

        /* restore this when we're done */
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL,
                                   role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);

        /*
         * Clean out the busy target table for any untagged commands.
         */
        i = 0;
        maxtarget = 16;
        if (target != CAM_TARGET_WILDCARD) {
                i = target;
                if (channel == 'B')
                        i += 8;
                maxtarget = i + 1;
        }

        if (lun == CAM_LUN_WILDCARD) {
                minlun = 0;
                maxlun = AHD_NUM_LUNS_NONPKT;
        } else if (lun >= AHD_NUM_LUNS_NONPKT) {
                minlun = maxlun = 0;
        } else {
                minlun = lun;
                maxlun = lun + 1;
        }

        if (role != ROLE_TARGET) {
                for (;i < maxtarget; i++) {
                        for (j = minlun;j < maxlun; j++) {
                                u_int scbid;
                                u_int tcl;

                                tcl = BUILD_TCL_RAW(i, 'A', j);
                                scbid = ahd_find_busy_tcl(ahd, tcl);
                                scbp = ahd_lookup_scb(ahd, scbid);
                                if (scbp == NULL
                                 || ahd_match_scb(ahd, scbp, target, channel,
                                                  lun, tag, role) == 0)
                                        continue;
                                ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j));
                        }
                }
        }

        /*
         * Don't abort commands that have already completed,
         * but haven't quite made it up to the host yet.
         */
        ahd_flush_qoutfifo(ahd);

        /*
         * Go through the pending CCB list and look for
         * commands for this target that are still active.
         * These are other tagged commands that were
         * disconnected when the reset occurred.
         */
        scbp_next = LIST_FIRST(&ahd->pending_scbs);
        while (scbp_next != NULL) {
                scbp = scbp_next;
                scbp_next = LIST_NEXT(scbp, pending_links);
                if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) {
                        cam_status ostat;

                        ostat = ahd_get_transaction_status(scbp);
                        if (ostat == CAM_REQ_INPROG)
                                ahd_set_transaction_status(scbp, status);
                        if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP)
                                ahd_freeze_scb(scbp);
                        if ((scbp->flags & SCB_ACTIVE) == 0)
                                printk("Inactive SCB on pending list\n");
                        ahd_done(ahd, scbp);
                        found++;
                }
        }
        ahd_restore_modes(ahd, saved_modes);
        ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status);
        ahd->flags |= AHD_UPDATE_PEND_CMDS;
        return found;
}

static void
ahd_reset_current_bus(struct ahd_softc *ahd)
{
        uint8_t scsiseq;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST);
        scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO);
        ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO);
        ahd_flush_device_writes(ahd);
        ahd_delay(AHD_BUSRESET_DELAY);
        /* Turn off the bus reset */
        ahd_outb(ahd, SCSISEQ0, scsiseq);
        ahd_flush_device_writes(ahd);
        ahd_delay(AHD_BUSRESET_DELAY);
        if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) {
                /*
                 * 2A Razor #474
                 * Certain chip state is not cleared for
                 * SCSI bus resets that we initiate, so
                 * we must reset the chip.
                 */
                ahd_reset(ahd, /*reinit*/TRUE);
                ahd_intr_enable(ahd, /*enable*/TRUE);
                AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        }

        ahd_clear_intstat(ahd);
}

int
ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
{
        struct  ahd_devinfo caminfo;
        u_int   initiator;
        u_int   target;
        u_int   max_scsiid;
        int     found;
        u_int   fifo;
        u_int   next_fifo;
        uint8_t scsiseq;

        /*
         * Check if the last bus reset is cleared
         */
        if (ahd->flags & AHD_BUS_RESET_ACTIVE) {
                printk("%s: bus reset still active\n",
                       ahd_name(ahd));
                return 0;
        }
        ahd->flags |= AHD_BUS_RESET_ACTIVE;

        ahd->pending_device = NULL;

        ahd_compile_devinfo(&caminfo,
                            CAM_TARGET_WILDCARD,
                            CAM_TARGET_WILDCARD,
                            CAM_LUN_WILDCARD,
                            channel, ROLE_UNKNOWN);
        ahd_pause(ahd);

        /* Make sure the sequencer is in a safe location. */
        ahd_clear_critical_section(ahd);

        /*
         * Run our command complete fifos to ensure that we perform
         * completion processing on any commands that 'completed'
         * before the reset occurred.
         */
        ahd_run_qoutfifo(ahd);
#ifdef AHD_TARGET_MODE
        if ((ahd->flags & AHD_TARGETROLE) != 0) {
                ahd_run_tqinfifo(ahd, /*paused*/TRUE);
        }
#endif
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);

        /*
         * Disable selections so no automatic hardware
         * functions will modify chip state.
         */
        ahd_outb(ahd, SCSISEQ0, 0);
        ahd_outb(ahd, SCSISEQ1, 0);

        /*
         * Safely shut down our DMA engines.  Always start with
         * the FIFO that is not currently active (if any are
         * actively connected).
         */
        next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
        if (next_fifo > CURRFIFO_1)
                /* If disconneced, arbitrarily start with FIFO1. */
                next_fifo = fifo = 0;
        do {
                next_fifo ^= CURRFIFO_1;
                ahd_set_modes(ahd, next_fifo, next_fifo);
                ahd_outb(ahd, DFCNTRL,
                         ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN));
                while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0)
                        ahd_delay(10);
                /*
                 * Set CURRFIFO to the now inactive channel.
                 */
                ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
                ahd_outb(ahd, DFFSTAT, next_fifo);
        } while (next_fifo != fifo);

        /*
         * Reset the bus if we are initiating this reset
         */
        ahd_clear_msg_state(ahd);
        ahd_outb(ahd, SIMODE1,
                 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST));

        if (initiate_reset)
                ahd_reset_current_bus(ahd);

        ahd_clear_intstat(ahd);

        /*
         * Clean up all the state information for the
         * pending transactions on this bus.
         */
        found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel,
                               CAM_LUN_WILDCARD, SCB_LIST_NULL,
                               ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);

        /*
         * Cleanup anything left in the FIFOs.
         */
        ahd_clear_fifo(ahd, 0);
        ahd_clear_fifo(ahd, 1);

        /*
         * Clear SCSI interrupt status
         */
        ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);

        /*
         * Reenable selections
         */
        ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST);
        scsiseq = ahd_inb(ahd, SCSISEQ_TEMPLATE);
        ahd_outb(ahd, SCSISEQ1, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));

        max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7;
#ifdef AHD_TARGET_MODE
        /*
         * Send an immediate notify ccb to all target more peripheral
         * drivers affected by this action.
         */
        for (target = 0; target <= max_scsiid; target++) {
                struct ahd_tmode_tstate* tstate;
                u_int lun;

                tstate = ahd->enabled_targets[target];
                if (tstate == NULL)
                        continue;
                for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
                        struct ahd_tmode_lstate* lstate;

                        lstate = tstate->enabled_luns[lun];
                        if (lstate == NULL)
                                continue;

                        ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD,
                                               EVENT_TYPE_BUS_RESET, /*arg*/0);
                        ahd_send_lstate_events(ahd, lstate);
                }
        }
#endif
        /*
         * Revert to async/narrow transfers until we renegotiate.
         */
        for (target = 0; target <= max_scsiid; target++) {

                if (ahd->enabled_targets[target] == NULL)
                        continue;
                for (initiator = 0; initiator <= max_scsiid; initiator++) {
                        struct ahd_devinfo devinfo;

                        ahd_compile_devinfo(&devinfo, target, initiator,
                                            CAM_LUN_WILDCARD,
                                            'A', ROLE_UNKNOWN);
                        ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
                                      AHD_TRANS_CUR, /*paused*/TRUE);
                        ahd_set_syncrate(ahd, &devinfo, /*period*/0,
                                         /*offset*/0, /*ppr_options*/0,
                                         AHD_TRANS_CUR, /*paused*/TRUE);
                }
        }

        /* Notify the XPT that a bus reset occurred */
        ahd_send_async(ahd, caminfo.channel, CAM_TARGET_WILDCARD,
                       CAM_LUN_WILDCARD, AC_BUS_RESET);

        ahd_restart(ahd);

        return (found);
}

/**************************** Statistics Processing ***************************/
static void
ahd_stat_timer(struct timer_list *t)
{
        struct  ahd_softc *ahd = from_timer(ahd, t, stat_timer);
        u_long  s;
        int     enint_coal;

        ahd_lock(ahd, &s);

        enint_coal = ahd->hs_mailbox & ENINT_COALESCE;
        if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold)
                enint_coal |= ENINT_COALESCE;
        else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold)
                enint_coal &= ~ENINT_COALESCE;

        if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) {
                ahd_enable_coalescing(ahd, enint_coal);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0)
                        printk("%s: Interrupt coalescing "
                               "now %sabled. Cmds %d\n",
                               ahd_name(ahd),
                               (enint_coal & ENINT_COALESCE) ? "en" : "dis",
                               ahd->cmdcmplt_total);
#endif
        }

        ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1);
        ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket];
        ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0;
        ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US);
        ahd_unlock(ahd, &s);
}

/****************************** Status Processing *****************************/

static void
ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb)
{
        struct  hardware_scb *hscb;
        int     paused;

        /*
         * The sequencer freezes its select-out queue
         * anytime a SCSI status error occurs.  We must
         * handle the error and increment our qfreeze count
         * to allow the sequencer to continue.  We don't
         * bother clearing critical sections here since all
         * operations are on data structures that the sequencer
         * is not touching once the queue is frozen.
         */
        hscb = scb->hscb;

        if (ahd_is_paused(ahd)) {
                paused = 1;
        } else {
                paused = 0;
                ahd_pause(ahd);
        }

        /* Freeze the queue until the client sees the error. */
        ahd_freeze_devq(ahd, scb);
        ahd_freeze_scb(scb);
        ahd->qfreeze_cnt++;
        ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);

        if (paused == 0)
                ahd_unpause(ahd);

        /* Don't want to clobber the original sense code */
        if ((scb->flags & SCB_SENSE) != 0) {
                /*
                 * Clear the SCB_SENSE Flag and perform
                 * a normal command completion.
                 */
                scb->flags &= ~SCB_SENSE;
                ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
                ahd_done(ahd, scb);
                return;
        }
        ahd_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR);
        ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status);
        switch (hscb->shared_data.istatus.scsi_status) {
        case STATUS_PKT_SENSE:
        {
                struct scsi_status_iu_header *siu;

                ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD);
                siu = (struct scsi_status_iu_header *)scb->sense_data;
                ahd_set_scsi_status(scb, siu->status);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_SENSE) != 0) {
                        ahd_print_path(ahd, scb);
                        printk("SCB 0x%x Received PKT Status of 0x%x\n",
                               SCB_GET_TAG(scb), siu->status);
                        printk("\tflags = 0x%x, sense len = 0x%x, "
                               "pktfail = 0x%x\n",
                               siu->flags, scsi_4btoul(siu->sense_length),
                               scsi_4btoul(siu->pkt_failures_length));
                }
#endif
                if ((siu->flags & SIU_RSPVALID) != 0) {
                        ahd_print_path(ahd, scb);
                        if (scsi_4btoul(siu->pkt_failures_length) < 4) {
                                printk("Unable to parse pkt_failures\n");
                        } else {

                                switch (SIU_PKTFAIL_CODE(siu)) {
                                case SIU_PFC_NONE:
                                        printk("No packet failure found\n");
                                        break;
                                case SIU_PFC_CIU_FIELDS_INVALID:
                                        printk("Invalid Command IU Field\n");
                                        break;
                                case SIU_PFC_TMF_NOT_SUPPORTED:
                                        printk("TMF not supported\n");
                                        break;
                                case SIU_PFC_TMF_FAILED:
                                        printk("TMF failed\n");
                                        break;
                                case SIU_PFC_INVALID_TYPE_CODE:
                                        printk("Invalid L_Q Type code\n");
                                        break;
                                case SIU_PFC_ILLEGAL_REQUEST:
                                        printk("Illegal request\n");
                                        break;
                                default:
                                        break;
                                }
                        }
                        if (siu->status == SAM_STAT_GOOD)
                                ahd_set_transaction_status(scb,
                                                           CAM_REQ_CMP_ERR);
                }
                if ((siu->flags & SIU_SNSVALID) != 0) {
                        scb->flags |= SCB_PKT_SENSE;
#ifdef AHD_DEBUG
                        if ((ahd_debug & AHD_SHOW_SENSE) != 0)
                                printk("Sense data available\n");
#endif
                }
                ahd_done(ahd, scb);
                break;
        }
        case SAM_STAT_COMMAND_TERMINATED:
        case SAM_STAT_CHECK_CONDITION:
        {
                struct ahd_devinfo devinfo;
                struct ahd_dma_seg *sg;
                struct scsi_sense *sc;
                struct ahd_initiator_tinfo *targ_info;
                struct ahd_tmode_tstate *tstate;
                struct ahd_transinfo *tinfo;
#ifdef AHD_DEBUG
                if (ahd_debug & AHD_SHOW_SENSE) {
                        ahd_print_path(ahd, scb);
                        printk("SCB %d: requests Check Status\n",
                               SCB_GET_TAG(scb));
                }
#endif

                if (ahd_perform_autosense(scb) == 0)
                        break;

                ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
                                    SCB_GET_TARGET(ahd, scb),
                                    SCB_GET_LUN(scb),
                                    SCB_GET_CHANNEL(ahd, scb),
                                    ROLE_INITIATOR);
                targ_info = ahd_fetch_transinfo(ahd,
                                                devinfo.channel,
                                                devinfo.our_scsiid,
                                                devinfo.target,
                                                &tstate);
                tinfo = &targ_info->curr;
                sg = scb->sg_list;
                sc = (struct scsi_sense *)hscb->shared_data.idata.cdb;
                /*
                 * Save off the residual if there is one.
                 */
                ahd_update_residual(ahd, scb);
#ifdef AHD_DEBUG
                if (ahd_debug & AHD_SHOW_SENSE) {
                        ahd_print_path(ahd, scb);
                        printk("Sending Sense\n");
                }
#endif
                scb->sg_count = 0;
                sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb),
                                  ahd_get_sense_bufsize(ahd, scb),
                                  /*last*/TRUE);
                sc->opcode = REQUEST_SENSE;
                sc->byte2 = 0;
                if (tinfo->protocol_version <= SCSI_REV_2
                 && SCB_GET_LUN(scb) < 8)
                        sc->byte2 = SCB_GET_LUN(scb) << 5;
                sc->unused[0] = 0;
                sc->unused[1] = 0;
                sc->length = ahd_get_sense_bufsize(ahd, scb);
                sc->control = 0;

                /*
                 * We can't allow the target to disconnect.
                 * This will be an untagged transaction and
                 * having the target disconnect will make this
                 * transaction indestinguishable from outstanding
                 * tagged transactions.
                 */
                hscb->control = 0;

                /*
                 * This request sense could be because the
                 * the device lost power or in some other
                 * way has lost our transfer negotiations.
                 * Renegotiate if appropriate.  Unit attention
                 * errors will be reported before any data
                 * phases occur.
                 */
                if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) {
                        ahd_update_neg_request(ahd, &devinfo,
                                               tstate, targ_info,
                                               AHD_NEG_IF_NON_ASYNC);
                }
                if (tstate->auto_negotiate & devinfo.target_mask) {
                        hscb->control |= MK_MESSAGE;
                        scb->flags &=
                            ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET);
                        scb->flags |= SCB_AUTO_NEGOTIATE;
                }
                hscb->cdb_len = sizeof(*sc);
                ahd_setup_data_scb(ahd, scb);
                scb->flags |= SCB_SENSE;
                ahd_queue_scb(ahd, scb);
                break;
        }
        case SAM_STAT_GOOD:
                printk("%s: Interrupted for status of 0???\n",
                       ahd_name(ahd));
                fallthrough;
        default:
                ahd_done(ahd, scb);
                break;
        }
}

static void
ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb)
{
        if (scb->hscb->shared_data.istatus.scsi_status != 0) {
                ahd_handle_scsi_status(ahd, scb);
        } else {
                ahd_calc_residual(ahd, scb);
                ahd_done(ahd, scb);
        }
}

/*
 * Calculate the residual for a just completed SCB.
 */
static void
ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb)
{
        struct hardware_scb *hscb;
        struct initiator_status *spkt;
        uint32_t sgptr;
        uint32_t resid_sgptr;
        uint32_t resid;

        /*
         * 5 cases.
         * 1) No residual.
         *    SG_STATUS_VALID clear in sgptr.
         * 2) Transferless command
         * 3) Never performed any transfers.
         *    sgptr has SG_FULL_RESID set.
         * 4) No residual but target did not
         *    save data pointers after the
         *    last transfer, so sgptr was
         *    never updated.
         * 5) We have a partial residual.
         *    Use residual_sgptr to determine
         *    where we are.
         */

        hscb = scb->hscb;
        sgptr = ahd_le32toh(hscb->sgptr);
        if ((sgptr & SG_STATUS_VALID) == 0)
                /* Case 1 */
                return;
        sgptr &= ~SG_STATUS_VALID;

        if ((sgptr & SG_LIST_NULL) != 0)
                /* Case 2 */
                return;

        /*
         * Residual fields are the same in both
         * target and initiator status packets,
         * so we can always use the initiator fields
         * regardless of the role for this SCB.
         */
        spkt = &hscb->shared_data.istatus;
        resid_sgptr = ahd_le32toh(spkt->residual_sgptr);
        if ((sgptr & SG_FULL_RESID) != 0) {
                /* Case 3 */
                resid = ahd_get_transfer_length(scb);
        } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
                /* Case 4 */
                return;
        } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) {
                ahd_print_path(ahd, scb);
                printk("data overrun detected Tag == 0x%x.\n",
                       SCB_GET_TAG(scb));
                ahd_freeze_devq(ahd, scb);
                ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
                ahd_freeze_scb(scb);
                return;
        } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
                panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
                /* NOTREACHED */
        } else {
                struct ahd_dma_seg *sg;

                /*
                 * Remainder of the SG where the transfer
                 * stopped.
                 */
                resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK;
                sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK);

                /* The residual sg_ptr always points to the next sg */
                sg--;

                /*
                 * Add up the contents of all residual
                 * SG segments that are after the SG where
                 * the transfer stopped.
                 */
                while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) {
                        sg++;
                        resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
                }
        }
        if ((scb->flags & SCB_SENSE) == 0)
                ahd_set_residual(scb, resid);
        else
                ahd_set_sense_residual(scb, resid);

#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_MISC) != 0) {
                ahd_print_path(ahd, scb);
                printk("Handled %sResidual of %d bytes\n",
                       (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
        }
#endif
}

/******************************* Target Mode **********************************/
#ifdef AHD_TARGET_MODE
/*
 * Add a target mode event to this lun's queue
 */
static void
ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate,
                       u_int initiator_id, u_int event_type, u_int event_arg)
{
        struct ahd_tmode_event *event;
        int pending;

        xpt_freeze_devq(lstate->path, /*count*/1);
        if (lstate->event_w_idx >= lstate->event_r_idx)
                pending = lstate->event_w_idx - lstate->event_r_idx;
        else
                pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1
                        - (lstate->event_r_idx - lstate->event_w_idx);

        if (event_type == EVENT_TYPE_BUS_RESET
         || event_type == TARGET_RESET) {
                /*
                 * Any earlier events are irrelevant, so reset our buffer.
                 * This has the effect of allowing us to deal with reset
                 * floods (an external device holding down the reset line)
                 * without losing the event that is really interesting.
                 */
                lstate->event_r_idx = 0;
                lstate->event_w_idx = 0;
                xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
        }

        if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) {
                xpt_print_path(lstate->path);
                printk("immediate event %x:%x lost\n",
                       lstate->event_buffer[lstate->event_r_idx].event_type,
                       lstate->event_buffer[lstate->event_r_idx].event_arg);
                lstate->event_r_idx++;
                if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
                        lstate->event_r_idx = 0;
                xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
        }

        event = &lstate->event_buffer[lstate->event_w_idx];
        event->initiator_id = initiator_id;
        event->event_type = event_type;
        event->event_arg = event_arg;
        lstate->event_w_idx++;
        if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
                lstate->event_w_idx = 0;
}

/*
 * Send any target mode events queued up waiting
 * for immediate notify resources.
 */
void
ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate)
{
        struct ccb_hdr *ccbh;
        struct ccb_immed_notify *inot;

        while (lstate->event_r_idx != lstate->event_w_idx
            && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
                struct ahd_tmode_event *event;

                event = &lstate->event_buffer[lstate->event_r_idx];
                SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
                inot = (struct ccb_immed_notify *)ccbh;
                switch (event->event_type) {
                case EVENT_TYPE_BUS_RESET:
                        ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
                        break;
                default:
                        ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
                        inot->message_args[0] = event->event_type;
                        inot->message_args[1] = event->event_arg;
                        break;
                }
                inot->initiator_id = event->initiator_id;
                inot->sense_len = 0;
                xpt_done((union ccb *)inot);
                lstate->event_r_idx++;
                if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
                        lstate->event_r_idx = 0;
        }
}
#endif

/******************** Sequencer Program Patching/Download *********************/

#ifdef AHD_DUMP_SEQ
void
ahd_dumpseq(struct ahd_softc* ahd)
{
        int i;
        int max_prog;

        max_prog = 2048;

        ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
        ahd_outw(ahd, PRGMCNT, 0);
        for (i = 0; i < max_prog; i++) {
                uint8_t ins_bytes[4];

                ahd_insb(ahd, SEQRAM, ins_bytes, 4);
                printk("0x%08x\n", ins_bytes[0] << 24
                                 | ins_bytes[1] << 16
                                 | ins_bytes[2] << 8
                                 | ins_bytes[3]);
        }
}
#endif

static void
ahd_loadseq(struct ahd_softc *ahd)
{
        struct  cs cs_table[NUM_CRITICAL_SECTIONS];
        u_int   begin_set[NUM_CRITICAL_SECTIONS];
        u_int   end_set[NUM_CRITICAL_SECTIONS];
        const struct patch *cur_patch;
        u_int   cs_count;
        u_int   cur_cs;
        u_int   i;
        int     downloaded;
        u_int   skip_addr;
        u_int   sg_prefetch_cnt;
        u_int   sg_prefetch_cnt_limit;
        u_int   sg_prefetch_align;
        u_int   sg_size;
        u_int   cacheline_mask;
        uint8_t download_consts[DOWNLOAD_CONST_COUNT];

        if (bootverbose)
                printk("%s: Downloading Sequencer Program...",
                       ahd_name(ahd));

#if DOWNLOAD_CONST_COUNT != 8
#error "Download Const Mismatch"
#endif
        /*
         * Start out with 0 critical sections
         * that apply to this firmware load.
         */
        cs_count = 0;
        cur_cs = 0;
        memset(begin_set, 0, sizeof(begin_set));
        memset(end_set, 0, sizeof(end_set));

        /*
         * Setup downloadable constant table.
         *
         * The computation for the S/G prefetch variables is
         * a bit complicated.  We would like to always fetch
         * in terms of cachelined sized increments.  However,
         * if the cacheline is not an even multiple of the
         * SG element size or is larger than our SG RAM, using
         * just the cache size might leave us with only a portion
         * of an SG element at the tail of a prefetch.  If the
         * cacheline is larger than our S/G prefetch buffer less
         * the size of an SG element, we may round down to a cacheline
         * that doesn't contain any or all of the S/G of interest
         * within the bounds of our S/G ram.  Provide variables to
         * the sequencer that will allow it to handle these edge
         * cases.
         */
        /* Start by aligning to the nearest cacheline. */
        sg_prefetch_align = ahd->pci_cachesize;
        if (sg_prefetch_align == 0)
                sg_prefetch_align = 8;
        /* Round down to the nearest power of 2. */
        while (powerof2(sg_prefetch_align) == 0)
                sg_prefetch_align--;

        cacheline_mask = sg_prefetch_align - 1;

        /*
         * If the cacheline boundary is greater than half our prefetch RAM
         * we risk not being able to fetch even a single complete S/G
         * segment if we align to that boundary.
         */
        if (sg_prefetch_align > CCSGADDR_MAX/2)
                sg_prefetch_align = CCSGADDR_MAX/2;
        /* Start by fetching a single cacheline. */
        sg_prefetch_cnt = sg_prefetch_align;
        /*
         * Increment the prefetch count by cachelines until
         * at least one S/G element will fit.
         */
        sg_size = sizeof(struct ahd_dma_seg);
        if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
                sg_size = sizeof(struct ahd_dma64_seg);
        while (sg_prefetch_cnt < sg_size)
                sg_prefetch_cnt += sg_prefetch_align;
        /*
         * If the cacheline is not an even multiple of
         * the S/G size, we may only get a partial S/G when
         * we align. Add a cacheline if this is the case.
         */
        if ((sg_prefetch_align % sg_size) != 0
         && (sg_prefetch_cnt < CCSGADDR_MAX))
                sg_prefetch_cnt += sg_prefetch_align;
        /*
         * Lastly, compute a value that the sequencer can use
         * to determine if the remainder of the CCSGRAM buffer
         * has a full S/G element in it.
         */
        sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1);
        download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
        download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit;
        download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1);
        download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1);
        download_consts[SG_SIZEOF] = sg_size;
        download_consts[PKT_OVERRUN_BUFOFFSET] =
                (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256;
        download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN;
        download_consts[CACHELINE_MASK] = cacheline_mask;
        cur_patch = patches;
        downloaded = 0;
        skip_addr = 0;
        ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
        ahd_outw(ahd, PRGMCNT, 0);

        for (i = 0; i < sizeof(seqprog)/4; i++) {
                if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) {
                        /*
                         * Don't download this instruction as it
                         * is in a patch that was removed.
                         */
                        continue;
                }
                /*
                 * Move through the CS table until we find a CS
                 * that might apply to this instruction.
                 */
                for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) {
                        if (critical_sections[cur_cs].end <= i) {
                                if (begin_set[cs_count] == TRUE
                                 && end_set[cs_count] == FALSE) {
                                        cs_table[cs_count].end = downloaded;
                                        end_set[cs_count] = TRUE;
                                        cs_count++;
                                }
                                continue;
                        }
                        if (critical_sections[cur_cs].begin <= i
                         && begin_set[cs_count] == FALSE) {
                                cs_table[cs_count].begin = downloaded;
                                begin_set[cs_count] = TRUE;
                        }
                        break;
                }
                ahd_download_instr(ahd, i, download_consts);
                downloaded++;
        }

        ahd->num_critical_sections = cs_count;
        if (cs_count != 0) {

                cs_count *= sizeof(struct cs);
                ahd->critical_sections = kmemdup(cs_table, cs_count, GFP_ATOMIC);
                if (ahd->critical_sections == NULL)
                        panic("ahd_loadseq: Could not malloc");
        }
        ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE);

        if (bootverbose) {
                printk(" %d instructions downloaded\n", downloaded);
                printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
                       ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags);
        }
}

static int
ahd_check_patch(struct ahd_softc *ahd, const struct patch **start_patch,
                u_int start_instr, u_int *skip_addr)
{
        const struct patch *cur_patch;
        const struct patch *last_patch;
        u_int   num_patches;

        num_patches = ARRAY_SIZE(patches);
        last_patch = &patches[num_patches];
        cur_patch = *start_patch;

        while (cur_patch < last_patch && start_instr == cur_patch->begin) {

                if (cur_patch->patch_func(ahd) == 0) {

                        /* Start rejecting code */
                        *skip_addr = start_instr + cur_patch->skip_instr;
                        cur_patch += cur_patch->skip_patch;
                } else {
                        /* Accepted this patch.  Advance to the next
                         * one and wait for our intruction pointer to
                         * hit this point.
                         */
                        cur_patch++;
                }
        }

        *start_patch = cur_patch;
        if (start_instr < *skip_addr)
                /* Still skipping */
                return (0);

        return (1);
}

static u_int
ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address)
{
        const struct patch *cur_patch;
        int address_offset;
        u_int skip_addr;
        u_int i;

        address_offset = 0;
        cur_patch = patches;
        skip_addr = 0;

        for (i = 0; i < address;) {

                ahd_check_patch(ahd, &cur_patch, i, &skip_addr);

                if (skip_addr > i) {
                        int end_addr;

                        end_addr = min(address, skip_addr);
                        address_offset += end_addr - i;
                        i = skip_addr;
                } else {
                        i++;
                }
        }
        return (address - address_offset);
}

static void
ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts)
{
        union   ins_formats instr;
        struct  ins_format1 *fmt1_ins;
        struct  ins_format3 *fmt3_ins;
        u_int   opcode;

        /*
         * The firmware is always compiled into a little endian format.
         */
        instr.integer = ahd_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);

        fmt1_ins = &instr.format1;
        fmt3_ins = NULL;

        /* Pull the opcode */
        opcode = instr.format1.opcode;
        switch (opcode) {
        case AIC_OP_JMP:
        case AIC_OP_JC:
        case AIC_OP_JNC:
        case AIC_OP_CALL:
        case AIC_OP_JNE:
        case AIC_OP_JNZ:
        case AIC_OP_JE:
        case AIC_OP_JZ:
        {
                fmt3_ins = &instr.format3;
                fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address);
        }
                fallthrough;
        case AIC_OP_OR:
        case AIC_OP_AND:
        case AIC_OP_XOR:
        case AIC_OP_ADD:
        case AIC_OP_ADC:
        case AIC_OP_BMOV:
                if (fmt1_ins->parity != 0) {
                        fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
                }
                fmt1_ins->parity = 0;
                fallthrough;
        case AIC_OP_ROL:
        {
                int i, count;

                /* Calculate odd parity for the instruction */
                for (i = 0, count = 0; i < 31; i++) {
                        uint32_t mask;

                        mask = 0x01 << i;
                        if ((instr.integer & mask) != 0)
                                count++;
                }
                if ((count & 0x01) == 0)
                        instr.format1.parity = 1;

                /* The sequencer is a little endian cpu */
                instr.integer = ahd_htole32(instr.integer);
                ahd_outsb(ahd, SEQRAM, instr.bytes, 4);
                break;
        }
        default:
                panic("Unknown opcode encountered in seq program");
                break;
        }
}

static int
ahd_probe_stack_size(struct ahd_softc *ahd)
{
        int last_probe;

        last_probe = 0;
        while (1) {
                int i;

                /*
                 * We avoid using 0 as a pattern to avoid
                 * confusion if the stack implementation
                 * "back-fills" with zeros when "poping'
                 * entries.
                 */
                for (i = 1; i <= last_probe+1; i++) {
                       ahd_outb(ahd, STACK, i & 0xFF);
                       ahd_outb(ahd, STACK, (i >> 8) & 0xFF);
                }

                /* Verify */
                for (i = last_probe+1; i > 0; i--) {
                        u_int stack_entry;

                        stack_entry = ahd_inb(ahd, STACK)
                                    |(ahd_inb(ahd, STACK) << 8);
                        if (stack_entry != i)
                                goto sized;
                }
                last_probe++;
        }
sized:
        return (last_probe);
}

int
ahd_print_register(const ahd_reg_parse_entry_t *table, u_int num_entries,
                   const char *name, u_int address, u_int value,
                   u_int *cur_column, u_int wrap_point)
{
        int     printed;
        u_int   printed_mask;

        if (cur_column != NULL && *cur_column >= wrap_point) {
                printk("\n");
                *cur_column = 0;
        }
        printed = printk("%s[0x%x]", name, value);
        if (table == NULL) {
                printed += printk(" ");
                *cur_column += printed;
                return (printed);
        }
        printed_mask = 0;
        while (printed_mask != 0xFF) {
                int entry;

                for (entry = 0; entry < num_entries; entry++) {
                        if (((value & table[entry].mask)
                          != table[entry].value)
                         || ((printed_mask & table[entry].mask)
                          == table[entry].mask))
                                continue;

                        printed += printk("%s%s",
                                          printed_mask == 0 ? ":(" : "|",
                                          table[entry].name);
                        printed_mask |= table[entry].mask;

                        break;
                }
                if (entry >= num_entries)
                        break;
        }
        if (printed_mask != 0)
                printed += printk(") ");
        else
                printed += printk(" ");
        if (cur_column != NULL)
                *cur_column += printed;
        return (printed);
}

void
ahd_dump_card_state(struct ahd_softc *ahd)
{
        struct scb      *scb;
        ahd_mode_state   saved_modes;
        u_int            dffstat;
        int              paused;
        u_int            scb_index;
        u_int            saved_scb_index;
        u_int            cur_col;
        int              i;

        if (ahd_is_paused(ahd)) {
                paused = 1;
        } else {
                paused = 0;
                ahd_pause(ahd);
        }
        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
               "%s: Dumping Card State at program address 0x%x Mode 0x%x\n",
               ahd_name(ahd),
               ahd_inw(ahd, CURADDR),
               ahd_build_mode_state(ahd, ahd->saved_src_mode,
                                    ahd->saved_dst_mode));
        if (paused)
                printk("Card was paused\n");

        if (ahd_check_cmdcmpltqueues(ahd))
                printk("Completions are pending\n");

        /*
         * Mode independent registers.
         */
        cur_col = 0;
        ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50);
        ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50);
        ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50);
        ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
        ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
        ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
        ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50);
        ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50);
        ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50);
        ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50);
        ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50);
        ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50);
        ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50);
        ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50);
        ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50);
        ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
        ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
        ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
        ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50);
        ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT),
                                       &cur_col, 50);
        ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50);
        ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID),
                                    &cur_col, 50);
        ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
        ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
        ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
        ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50);
        ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50);
        ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50);
        ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50);
        ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50);
        ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50);
        ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50);
        ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50);
        ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50);
        printk("\n");
        printk("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x "
               "CURRSCB 0x%x NEXTSCB 0x%x\n",
               ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING),
               ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB),
               ahd_inw(ahd, NEXTSCB));
        cur_col = 0;
        /* QINFIFO */
        ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
                           CAM_LUN_WILDCARD, SCB_LIST_NULL,
                           ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT);
        saved_scb_index = ahd_get_scbptr(ahd);
        printk("Pending list:");
        i = 0;
        LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
                if (i++ > AHD_SCB_MAX)
                        break;
                cur_col = printk("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb),
                                 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT));
                ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
                ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL),
                                      &cur_col, 60);
                ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID),
                                     &cur_col, 60);
        }
        printk("\nTotal %d\n", i);

        printk("Kernel Free SCB list: ");
        i = 0;
        TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
                struct scb *list_scb;

                list_scb = scb;
                do {
                        printk("%d ", SCB_GET_TAG(list_scb));
                        list_scb = LIST_NEXT(list_scb, collision_links);
                } while (list_scb && i++ < AHD_SCB_MAX);
        }

        LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
                if (i++ > AHD_SCB_MAX)
                        break;
                printk("%d ", SCB_GET_TAG(scb));
        }
        printk("\n");

        printk("Sequencer Complete DMA-inprog list: ");
        scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD);
        i = 0;
        while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
                ahd_set_scbptr(ahd, scb_index);
                printk("%d ", scb_index);
                scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
        }
        printk("\n");

        printk("Sequencer Complete list: ");
        scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD);
        i = 0;
        while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
                ahd_set_scbptr(ahd, scb_index);
                printk("%d ", scb_index);
                scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
        }
        printk("\n");

        printk("Sequencer DMA-Up and Complete list: ");
        scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
        i = 0;
        while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
                ahd_set_scbptr(ahd, scb_index);
                printk("%d ", scb_index);
                scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
        }
        printk("\n");
        printk("Sequencer On QFreeze and Complete list: ");
        scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
        i = 0;
        while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
                ahd_set_scbptr(ahd, scb_index);
                printk("%d ", scb_index);
                scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
        }
        printk("\n");
        ahd_set_scbptr(ahd, saved_scb_index);
        dffstat = ahd_inb(ahd, DFFSTAT);
        for (i = 0; i < 2; i++) {
#ifdef AHD_DEBUG
                struct scb *fifo_scb;
#endif
                u_int       fifo_scbptr;

                ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
                fifo_scbptr = ahd_get_scbptr(ahd);
                printk("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
                       ahd_name(ahd), i,
                       (dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
                       ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
                cur_col = 0;
                ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50);
                ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50);
                ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50);
                ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50);
                ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW),
                                          &cur_col, 50);
                ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50);
                ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50);
                ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50);
                ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50);
                if (cur_col > 50) {
                        printk("\n");
                        cur_col = 0;
                }
                cur_col += printk("SHADDR = 0x%x%x, SHCNT = 0x%x ",
                                  ahd_inl(ahd, SHADDR+4),
                                  ahd_inl(ahd, SHADDR),
                                  (ahd_inb(ahd, SHCNT)
                                | (ahd_inb(ahd, SHCNT + 1) << 8)
                                | (ahd_inb(ahd, SHCNT + 2) << 16)));
                if (cur_col > 50) {
                        printk("\n");
                        cur_col = 0;
                }
                cur_col += printk("HADDR = 0x%x%x, HCNT = 0x%x ",
                                  ahd_inl(ahd, HADDR+4),
                                  ahd_inl(ahd, HADDR),
                                  (ahd_inb(ahd, HCNT)
                                | (ahd_inb(ahd, HCNT + 1) << 8)
                                | (ahd_inb(ahd, HCNT + 2) << 16)));
                ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50);
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_SG) != 0) {
                        fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr);
                        if (fifo_scb != NULL)
                                ahd_dump_sglist(fifo_scb);
                }
#endif
        }
        printk("\nLQIN: ");
        for (i = 0; i < 20; i++)
                printk("0x%x ", ahd_inb(ahd, LQIN + i));
        printk("\n");
        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
        printk("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n",
               ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE),
               ahd_inb(ahd, OPTIONMODE));
        printk("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
               ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
               ahd_inb(ahd, MAXCMDCNT));
        printk("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
               ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID),
               ahd_inb(ahd, SAVED_LUN));
        ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
        printk("\n");
        ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
        cur_col = 0;
        ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50);
        printk("\n");
        ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
        printk("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n",
               ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX),
               ahd_inw(ahd, DINDEX));
        printk("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n",
               ahd_name(ahd), ahd_get_scbptr(ahd),
               ahd_inw_scbram(ahd, SCB_NEXT),
               ahd_inw_scbram(ahd, SCB_NEXT2));
        printk("CDB %x %x %x %x %x %x\n",
               ahd_inb_scbram(ahd, SCB_CDB_STORE),
               ahd_inb_scbram(ahd, SCB_CDB_STORE+1),
               ahd_inb_scbram(ahd, SCB_CDB_STORE+2),
               ahd_inb_scbram(ahd, SCB_CDB_STORE+3),
               ahd_inb_scbram(ahd, SCB_CDB_STORE+4),
               ahd_inb_scbram(ahd, SCB_CDB_STORE+5));
        printk("STACK:");
        for (i = 0; i < ahd->stack_size; i++) {
                ahd->saved_stack[i] =
                    ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8);
                printk(" 0x%x", ahd->saved_stack[i]);
        }
        for (i = ahd->stack_size-1; i >= 0; i--) {
                ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF);
                ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF);
        }
        printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
        ahd_restore_modes(ahd, saved_modes);
        if (paused == 0)
                ahd_unpause(ahd);
}

#if 0
void
ahd_dump_scbs(struct ahd_softc *ahd)
{
        ahd_mode_state saved_modes;
        u_int          saved_scb_index;
        int            i;

        saved_modes = ahd_save_modes(ahd);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        saved_scb_index = ahd_get_scbptr(ahd);
        for (i = 0; i < AHD_SCB_MAX; i++) {
                ahd_set_scbptr(ahd, i);
                printk("%3d", i);
                printk("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n",
                       ahd_inb_scbram(ahd, SCB_CONTROL),
                       ahd_inb_scbram(ahd, SCB_SCSIID),
                       ahd_inw_scbram(ahd, SCB_NEXT),
                       ahd_inw_scbram(ahd, SCB_NEXT2),
                       ahd_inl_scbram(ahd, SCB_SGPTR),
                       ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR));
        }
        printk("\n");
        ahd_set_scbptr(ahd, saved_scb_index);
        ahd_restore_modes(ahd, saved_modes);
}
#endif  /*  0  */

/**************************** Flexport Logic **********************************/
/*
 * Read count 16bit words from 16bit word address start_addr from the
 * SEEPROM attached to the controller, into buf, using the controller's
 * SEEPROM reading state machine.  Optionally treat the data as a byte
 * stream in terms of byte order.
 */
int
ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf,
                 u_int start_addr, u_int count, int bytestream)
{
        u_int cur_addr;
        u_int end_addr;
        int   error;

        /*
         * If we never make it through the loop even once,
         * we were passed invalid arguments.
         */
        error = EINVAL;
        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        end_addr = start_addr + count;
        for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {

                ahd_outb(ahd, SEEADR, cur_addr);
                ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART);

                error = ahd_wait_seeprom(ahd);
                if (error)
                        break;
                if (bytestream != 0) {
                        uint8_t *bytestream_ptr;

                        bytestream_ptr = (uint8_t *)buf;
                        *bytestream_ptr++ = ahd_inb(ahd, SEEDAT);
                        *bytestream_ptr = ahd_inb(ahd, SEEDAT+1);
                } else {
                        /*
                         * ahd_inw() already handles machine byte order.
                         */
                        *buf = ahd_inw(ahd, SEEDAT);
                }
                buf++;
        }
        return (error);
}

/*
 * Write count 16bit words from buf, into SEEPROM attache to the
 * controller starting at 16bit word address start_addr, using the
 * controller's SEEPROM writing state machine.
 */
int
ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
                  u_int start_addr, u_int count)
{
        u_int cur_addr;
        u_int end_addr;
        int   error;
        int   retval;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        error = ENOENT;

        /* Place the chip into write-enable mode */
        ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR);
        ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART);
        error = ahd_wait_seeprom(ahd);
        if (error)
                return (error);

        /*
         * Write the data.  If we don't get through the loop at
         * least once, the arguments were invalid.
         */
        retval = EINVAL;
        end_addr = start_addr + count;
        for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
                ahd_outw(ahd, SEEDAT, *buf++);
                ahd_outb(ahd, SEEADR, cur_addr);
                ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART);

                retval = ahd_wait_seeprom(ahd);
                if (retval)
                        break;
        }

        /*
         * Disable writes.
         */
        ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR);
        ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART);
        error = ahd_wait_seeprom(ahd);
        if (error)
                return (error);
        return (retval);
}

/*
 * Wait ~100us for the serial eeprom to satisfy our request.
 */
static int
ahd_wait_seeprom(struct ahd_softc *ahd)
{
        int cnt;

        cnt = 5000;
        while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt)
                ahd_delay(5);

        if (cnt == 0)
                return (ETIMEDOUT);
        return (0);
}

/*
 * Validate the two checksums in the per_channel
 * vital product data struct.
 */
static int
ahd_verify_vpd_cksum(struct vpd_config *vpd)
{
        int i;
        int maxaddr;
        uint32_t checksum;
        uint8_t *vpdarray;

        vpdarray = (uint8_t *)vpd;
        maxaddr = offsetof(struct vpd_config, vpd_checksum);
        checksum = 0;
        for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++)
                checksum = checksum + vpdarray[i];
        if (checksum == 0
         || (-checksum & 0xFF) != vpd->vpd_checksum)
                return (0);

        checksum = 0;
        maxaddr = offsetof(struct vpd_config, checksum);
        for (i = offsetof(struct vpd_config, default_target_flags);
             i < maxaddr; i++)
                checksum = checksum + vpdarray[i];
        if (checksum == 0
         || (-checksum & 0xFF) != vpd->checksum)
                return (0);
        return (1);
}

int
ahd_verify_cksum(struct seeprom_config *sc)
{
        int i;
        int maxaddr;
        uint32_t checksum;
        uint16_t *scarray;

        maxaddr = (sizeof(*sc)/2) - 1;
        checksum = 0;
        scarray = (uint16_t *)sc;

        for (i = 0; i < maxaddr; i++)
                checksum = checksum + scarray[i];
        if (checksum == 0
         || (checksum & 0xFFFF) != sc->checksum) {
                return (0);
        } else {
                return (1);
        }
}

int
ahd_acquire_seeprom(struct ahd_softc *ahd)
{
        /*
         * We should be able to determine the SEEPROM type
         * from the flexport logic, but unfortunately not
         * all implementations have this logic and there is
         * no programatic method for determining if the logic
         * is present.
         */
        return (1);
#if 0
        uint8_t seetype;
        int     error;

        error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype);
        if (error != 0
            || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE))
                return (0);
        return (1);
#endif
}

void
ahd_release_seeprom(struct ahd_softc *ahd)
{
        /* Currently a no-op */
}

/*
 * Wait at most 2 seconds for flexport arbitration to succeed.
 */
static int
ahd_wait_flexport(struct ahd_softc *ahd)
{
        int cnt;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        cnt = 1000000 * 2 / 5;
        while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt)
                ahd_delay(5);

        if (cnt == 0)
                return (ETIMEDOUT);
        return (0);
}

int
ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value)
{
        int error;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        if (addr > 7)
                panic("ahd_write_flexport: address out of range");
        ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
        error = ahd_wait_flexport(ahd);
        if (error != 0)
                return (error);
        ahd_outb(ahd, BRDDAT, value);
        ahd_flush_device_writes(ahd);
        ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3));
        ahd_flush_device_writes(ahd);
        ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
        ahd_flush_device_writes(ahd);
        ahd_outb(ahd, BRDCTL, 0);
        ahd_flush_device_writes(ahd);
        return (0);
}

int
ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value)
{
        int     error;

        AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
        if (addr > 7)
                panic("ahd_read_flexport: address out of range");
        ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3));
        error = ahd_wait_flexport(ahd);
        if (error != 0)
                return (error);
        *value = ahd_inb(ahd, BRDDAT);
        ahd_outb(ahd, BRDCTL, 0);
        ahd_flush_device_writes(ahd);
        return (0);
}

/************************* Target Mode ****************************************/
#ifdef AHD_TARGET_MODE
cam_status
ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb,
                    struct ahd_tmode_tstate **tstate,
                    struct ahd_tmode_lstate **lstate,
                    int notfound_failure)
{

        if ((ahd->features & AHD_TARGETMODE) == 0)
                return (CAM_REQ_INVALID);

        /*
         * Handle the 'black hole' device that sucks up
         * requests to unattached luns on enabled targets.
         */
        if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
         && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
                *tstate = NULL;
                *lstate = ahd->black_hole;
        } else {
                u_int max_id;

                max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
                if (ccb->ccb_h.target_id >= max_id)
                        return (CAM_TID_INVALID);

                if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS)
                        return (CAM_LUN_INVALID);

                *tstate = ahd->enabled_targets[ccb->ccb_h.target_id];
                *lstate = NULL;
                if (*tstate != NULL)
                        *lstate =
                            (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
        }

        if (notfound_failure != 0 && *lstate == NULL)
                return (CAM_PATH_INVALID);

        return (CAM_REQ_CMP);
}

void
ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
{
#if NOT_YET
        struct     ahd_tmode_tstate *tstate;
        struct     ahd_tmode_lstate *lstate;
        struct     ccb_en_lun *cel;
        cam_status status;
        u_int      target;
        u_int      lun;
        u_int      target_mask;
        u_long     s;
        char       channel;

        status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate,
                                     /*notfound_failure*/FALSE);

        if (status != CAM_REQ_CMP) {
                ccb->ccb_h.status = status;
                return;
        }

        if ((ahd->features & AHD_MULTIROLE) != 0) {
                u_int      our_id;

                our_id = ahd->our_id;
                if (ccb->ccb_h.target_id != our_id) {
                        if ((ahd->features & AHD_MULTI_TID) != 0
                         && (ahd->flags & AHD_INITIATORROLE) != 0) {
                                /*
                                 * Only allow additional targets if
                                 * the initiator role is disabled.
                                 * The hardware cannot handle a re-select-in
                                 * on the initiator id during a re-select-out
                                 * on a different target id.
                                 */
                                status = CAM_TID_INVALID;
                        } else if ((ahd->flags & AHD_INITIATORROLE) != 0
                                || ahd->enabled_luns > 0) {
                                /*
                                 * Only allow our target id to change
                                 * if the initiator role is not configured
                                 * and there are no enabled luns which
                                 * are attached to the currently registered
                                 * scsi id.
                                 */
                                status = CAM_TID_INVALID;
                        }
                }
        }

        if (status != CAM_REQ_CMP) {
                ccb->ccb_h.status = status;
                return;
        }

        /*
         * We now have an id that is valid.
         * If we aren't in target mode, switch modes.
         */
        if ((ahd->flags & AHD_TARGETROLE) == 0
         && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
                u_long  s;

                printk("Configuring Target Mode\n");
                ahd_lock(ahd, &s);
                if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
                        ccb->ccb_h.status = CAM_BUSY;
                        ahd_unlock(ahd, &s);
                        return;
                }
                ahd->flags |= AHD_TARGETROLE;
                if ((ahd->features & AHD_MULTIROLE) == 0)
                        ahd->flags &= ~AHD_INITIATORROLE;
                ahd_pause(ahd);
                ahd_loadseq(ahd);
                ahd_restart(ahd);
                ahd_unlock(ahd, &s);
        }
        cel = &ccb->cel;
        target = ccb->ccb_h.target_id;
        lun = ccb->ccb_h.target_lun;
        channel = SIM_CHANNEL(ahd, sim);
        target_mask = 0x01 << target;
        if (channel == 'B')
                target_mask <<= 8;

        if (cel->enable != 0) {
                u_int scsiseq1;

                /* Are we already enabled?? */
                if (lstate != NULL) {
                        xpt_print_path(ccb->ccb_h.path);
                        printk("Lun already enabled\n");
                        ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
                        return;
                }

                if (cel->grp6_len != 0
                 || cel->grp7_len != 0) {
                        /*
                         * Don't (yet?) support vendor
                         * specific commands.
                         */
                        ccb->ccb_h.status = CAM_REQ_INVALID;
                        printk("Non-zero Group Codes\n");
                        return;
                }

                /*
                 * Seems to be okay.
                 * Setup our data structures.
                 */
                if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
                        tstate = ahd_alloc_tstate(ahd, target, channel);
                        if (tstate == NULL) {
                                xpt_print_path(ccb->ccb_h.path);
                                printk("Couldn't allocate tstate\n");
                                ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
                                return;
                        }
                }
                lstate = kzalloc(sizeof(*lstate), GFP_ATOMIC);
                if (lstate == NULL) {
                        xpt_print_path(ccb->ccb_h.path);
                        printk("Couldn't allocate lstate\n");
                        ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
                        return;
                }
                status = xpt_create_path(&lstate->path, /*periph*/NULL,
                                         xpt_path_path_id(ccb->ccb_h.path),
                                         xpt_path_target_id(ccb->ccb_h.path),
                                         xpt_path_lun_id(ccb->ccb_h.path));
                if (status != CAM_REQ_CMP) {
                        kfree(lstate);
                        xpt_print_path(ccb->ccb_h.path);
                        printk("Couldn't allocate path\n");
                        ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
                        return;
                }
                SLIST_INIT(&lstate->accept_tios);
                SLIST_INIT(&lstate->immed_notifies);
                ahd_lock(ahd, &s);
                ahd_pause(ahd);
                if (target != CAM_TARGET_WILDCARD) {
                        tstate->enabled_luns[lun] = lstate;
                        ahd->enabled_luns++;

                        if ((ahd->features & AHD_MULTI_TID) != 0) {
                                u_int targid_mask;

                                targid_mask = ahd_inw(ahd, TARGID);
                                targid_mask |= target_mask;
                                ahd_outw(ahd, TARGID, targid_mask);
                                ahd_update_scsiid(ahd, targid_mask);
                        } else {
                                u_int our_id;
                                char  channel;

                                channel = SIM_CHANNEL(ahd, sim);
                                our_id = SIM_SCSI_ID(ahd, sim);

                                /*
                                 * This can only happen if selections
                                 * are not enabled
                                 */
                                if (target != our_id) {
                                        u_int sblkctl;
                                        char  cur_channel;
                                        int   swap;

                                        sblkctl = ahd_inb(ahd, SBLKCTL);
                                        cur_channel = (sblkctl & SELBUSB)
                                                    ? 'B' : 'A';
                                        if ((ahd->features & AHD_TWIN) == 0)
                                                cur_channel = 'A';
                                        swap = cur_channel != channel;
                                        ahd->our_id = target;

                                        if (swap)
                                                ahd_outb(ahd, SBLKCTL,
                                                         sblkctl ^ SELBUSB);

                                        ahd_outb(ahd, SCSIID, target);

                                        if (swap)
                                                ahd_outb(ahd, SBLKCTL, sblkctl);
                                }
                        }
                } else
                        ahd->black_hole = lstate;
                /* Allow select-in operations */
                if (ahd->black_hole != NULL && ahd->enabled_luns > 0) {
                        scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
                        scsiseq1 |= ENSELI;
                        ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
                        scsiseq1 = ahd_inb(ahd, SCSISEQ1);
                        scsiseq1 |= ENSELI;
                        ahd_outb(ahd, SCSISEQ1, scsiseq1);
                }
                ahd_unpause(ahd);
                ahd_unlock(ahd, &s);
                ccb->ccb_h.status = CAM_REQ_CMP;
                xpt_print_path(ccb->ccb_h.path);
                printk("Lun now enabled for target mode\n");
        } else {
                struct scb *scb;
                int i, empty;

                if (lstate == NULL) {
                        ccb->ccb_h.status = CAM_LUN_INVALID;
                        return;
                }

                ahd_lock(ahd, &s);

                ccb->ccb_h.status = CAM_REQ_CMP;
                LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
                        struct ccb_hdr *ccbh;

                        ccbh = &scb->io_ctx->ccb_h;
                        if (ccbh->func_code == XPT_CONT_TARGET_IO
                         && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
                                printk("CTIO pending\n");
                                ccb->ccb_h.status = CAM_REQ_INVALID;
                                ahd_unlock(ahd, &s);
                                return;
                        }
                }

                if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
                        printk("ATIOs pending\n");
                        ccb->ccb_h.status = CAM_REQ_INVALID;
                }

                if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
                        printk("INOTs pending\n");
                        ccb->ccb_h.status = CAM_REQ_INVALID;
                }

                if (ccb->ccb_h.status != CAM_REQ_CMP) {
                        ahd_unlock(ahd, &s);
                        return;
                }

                xpt_print_path(ccb->ccb_h.path);
                printk("Target mode disabled\n");
                xpt_free_path(lstate->path);
                kfree(lstate);

                ahd_pause(ahd);
                /* Can we clean up the target too? */
                if (target != CAM_TARGET_WILDCARD) {
                        tstate->enabled_luns[lun] = NULL;
                        ahd->enabled_luns--;
                        for (empty = 1, i = 0; i < 8; i++)
                                if (tstate->enabled_luns[i] != NULL) {
                                        empty = 0;
                                        break;
                                }

                        if (empty) {
                                ahd_free_tstate(ahd, target, channel,
                                                /*force*/FALSE);
                                if (ahd->features & AHD_MULTI_TID) {
                                        u_int targid_mask;

                                        targid_mask = ahd_inw(ahd, TARGID);
                                        targid_mask &= ~target_mask;
                                        ahd_outw(ahd, TARGID, targid_mask);
                                        ahd_update_scsiid(ahd, targid_mask);
                                }
                        }
                } else {

                        ahd->black_hole = NULL;

                        /*
                         * We can't allow selections without
                         * our black hole device.
                         */
                        empty = TRUE;
                }
                if (ahd->enabled_luns == 0) {
                        /* Disallow select-in */
                        u_int scsiseq1;

                        scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
                        scsiseq1 &= ~ENSELI;
                        ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
                        scsiseq1 = ahd_inb(ahd, SCSISEQ1);
                        scsiseq1 &= ~ENSELI;
                        ahd_outb(ahd, SCSISEQ1, scsiseq1);

                        if ((ahd->features & AHD_MULTIROLE) == 0) {
                                printk("Configuring Initiator Mode\n");
                                ahd->flags &= ~AHD_TARGETROLE;
                                ahd->flags |= AHD_INITIATORROLE;
                                ahd_pause(ahd);
                                ahd_loadseq(ahd);
                                ahd_restart(ahd);
                                /*
                                 * Unpaused.  The extra unpause
                                 * that follows is harmless.
                                 */
                        }
                }
                ahd_unpause(ahd);
                ahd_unlock(ahd, &s);
        }
#endif
}

static void
ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask)
{
#if NOT_YET
        u_int scsiid_mask;
        u_int scsiid;

        if ((ahd->features & AHD_MULTI_TID) == 0)
                panic("ahd_update_scsiid called on non-multitid unit\n");

        /*
         * Since we will rely on the TARGID mask
         * for selection enables, ensure that OID
         * in SCSIID is not set to some other ID
         * that we don't want to allow selections on.
         */
        if ((ahd->features & AHD_ULTRA2) != 0)
                scsiid = ahd_inb(ahd, SCSIID_ULTRA2);
        else
                scsiid = ahd_inb(ahd, SCSIID);
        scsiid_mask = 0x1 << (scsiid & OID);
        if ((targid_mask & scsiid_mask) == 0) {
                u_int our_id;

                /* ffs counts from 1 */
                our_id = ffs(targid_mask);
                if (our_id == 0)
                        our_id = ahd->our_id;
                else
                        our_id--;
                scsiid &= TID;
                scsiid |= our_id;
        }
        if ((ahd->features & AHD_ULTRA2) != 0)
                ahd_outb(ahd, SCSIID_ULTRA2, scsiid);
        else
                ahd_outb(ahd, SCSIID, scsiid);
#endif
}

static void
ahd_run_tqinfifo(struct ahd_softc *ahd, int paused)
{
        struct target_cmd *cmd;

        ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD);
        while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) {

                /*
                 * Only advance through the queue if we
                 * have the resources to process the command.
                 */
                if (ahd_handle_target_cmd(ahd, cmd) != 0)
                        break;

                cmd->cmd_valid = 0;
                ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
                                ahd->shared_data_map.dmamap,
                                ahd_targetcmd_offset(ahd, ahd->tqinfifonext),
                                sizeof(struct target_cmd),
                                BUS_DMASYNC_PREREAD);
                ahd->tqinfifonext++;

                /*
                 * Lazily update our position in the target mode incoming
                 * command queue as seen by the sequencer.
                 */
                if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
                        u_int hs_mailbox;

                        hs_mailbox = ahd_inb(ahd, HS_MAILBOX);
                        hs_mailbox &= ~HOST_TQINPOS;
                        hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS;
                        ahd_outb(ahd, HS_MAILBOX, hs_mailbox);
                }
        }
}

static int
ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd)
{
        struct    ahd_tmode_tstate *tstate;
        struct    ahd_tmode_lstate *lstate;
        struct    ccb_accept_tio *atio;
        uint8_t *byte;
        int       initiator;
        int       target;
        int       lun;

        initiator = SCSIID_TARGET(ahd, cmd->scsiid);
        target = SCSIID_OUR_ID(cmd->scsiid);
        lun    = (cmd->identify & MSG_IDENTIFY_LUNMASK);

        byte = cmd->bytes;
        tstate = ahd->enabled_targets[target];
        lstate = NULL;
        if (tstate != NULL)
                lstate = tstate->enabled_luns[lun];

        /*
         * Commands for disabled luns go to the black hole driver.
         */
        if (lstate == NULL)
                lstate = ahd->black_hole;

        atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
        if (atio == NULL) {
                ahd->flags |= AHD_TQINFIFO_BLOCKED;
                /*
                 * Wait for more ATIOs from the peripheral driver for this lun.
                 */
                return (1);
        } else
                ahd->flags &= ~AHD_TQINFIFO_BLOCKED;
#ifdef AHD_DEBUG
        if ((ahd_debug & AHD_SHOW_TQIN) != 0)
                printk("Incoming command from %d for %d:%d%s\n",
                       initiator, target, lun,
                       lstate == ahd->black_hole ? "(Black Holed)" : "");
#endif
        SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);

        if (lstate == ahd->black_hole) {
                /* Fill in the wildcards */
                atio->ccb_h.target_id = target;
                atio->ccb_h.target_lun = lun;
        }

        /*
         * Package it up and send it off to
         * whomever has this lun enabled.
         */
        atio->sense_len = 0;
        atio->init_id = initiator;
        if (byte[0] != 0xFF) {
                /* Tag was included */
                atio->tag_action = *byte++;
                atio->tag_id = *byte++;
                atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
        } else {
                atio->ccb_h.flags = 0;
        }
        byte++;

        /* Okay.  Now determine the cdb size based on the command code */
        switch (*byte >> CMD_GROUP_CODE_SHIFT) {
        case 0:
                atio->cdb_len = 6;
                break;
        case 1:
        case 2:
                atio->cdb_len = 10;
                break;
        case 4:
                atio->cdb_len = 16;
                break;
        case 5:
                atio->cdb_len = 12;
                break;
        case 3:
        default:
                /* Only copy the opcode. */
                atio->cdb_len = 1;
                printk("Reserved or VU command code type encountered\n");
                break;
        }

        memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);

        atio->ccb_h.status |= CAM_CDB_RECVD;

        if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
                /*
                 * We weren't allowed to disconnect.
                 * We're hanging on the bus until a
                 * continue target I/O comes in response
                 * to this accept tio.
                 */
#ifdef AHD_DEBUG
                if ((ahd_debug & AHD_SHOW_TQIN) != 0)
                        printk("Received Immediate Command %d:%d:%d - %p\n",
                               initiator, target, lun, ahd->pending_device);
#endif
                ahd->pending_device = lstate;
                ahd_freeze_ccb((union ccb *)atio);
                atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
        }
        xpt_done((union ccb*)atio);
        return (0);
}

#endif