1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
5 * Copyright (c) 1995-2000 Advanced System Products, Inc.
6 * Copyright (c) 2000-2001 ConnectCom Solutions, Inc.
7 * Copyright (c) 2007 Matthew Wilcox <matthew@wil.cx>
8 * Copyright (c) 2014 Hannes Reinecke <hare@suse.de>
13 * As of March 8, 2000 Advanced System Products, Inc. (AdvanSys)
14 * changed its name to ConnectCom Solutions, Inc.
15 * On June 18, 2001 Initio Corp. acquired ConnectCom's SCSI assets
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/kernel.h>
21 #include <linux/types.h>
22 #include <linux/ioport.h>
23 #include <linux/interrupt.h>
24 #include <linux/delay.h>
25 #include <linux/slab.h>
27 #include <linux/proc_fs.h>
28 #include <linux/init.h>
29 #include <linux/blkdev.h>
30 #include <linux/isa.h>
31 #include <linux/eisa.h>
32 #include <linux/pci.h>
33 #include <linux/spinlock.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/firmware.h>
36 #include <linux/dmapool.h>
41 #include <scsi/scsi_cmnd.h>
42 #include <scsi/scsi_device.h>
43 #include <scsi/scsi_tcq.h>
44 #include <scsi/scsi.h>
45 #include <scsi/scsi_host.h>
47 #define DRV_NAME "advansys"
48 #define ASC_VERSION "3.5" /* AdvanSys Driver Version */
52 * 1. Use scsi_transport_spi
53 * 2. advansys_info is not safe against multiple simultaneous callers
54 * 3. Add module_param to override ISA/VLB ioport array
57 /* Enable driver /proc statistics. */
58 #define ADVANSYS_STATS
60 /* Enable driver tracing. */
63 typedef unsigned char uchar;
65 #define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
67 #define PCI_VENDOR_ID_ASP 0x10cd
68 #define PCI_DEVICE_ID_ASP_1200A 0x1100
69 #define PCI_DEVICE_ID_ASP_ABP940 0x1200
70 #define PCI_DEVICE_ID_ASP_ABP940U 0x1300
71 #define PCI_DEVICE_ID_ASP_ABP940UW 0x2300
72 #define PCI_DEVICE_ID_38C0800_REV1 0x2500
73 #define PCI_DEVICE_ID_38C1600_REV1 0x2700
75 #define PortAddr unsigned int /* port address size */
76 #define inp(port) inb(port)
77 #define outp(port, byte) outb((byte), (port))
79 #define inpw(port) inw(port)
80 #define outpw(port, word) outw((word), (port))
82 #define ASC_MAX_SG_QUEUE 7
83 #define ASC_MAX_SG_LIST 255
85 #define ASC_CS_TYPE unsigned short
87 #define ASC_IS_EISA (0x0002)
88 #define ASC_IS_PCI (0x0004)
89 #define ASC_IS_PCI_ULTRA (0x0104)
90 #define ASC_IS_PCMCIA (0x0008)
91 #define ASC_IS_MCA (0x0020)
92 #define ASC_IS_VL (0x0040)
93 #define ASC_IS_WIDESCSI_16 (0x0100)
94 #define ASC_IS_WIDESCSI_32 (0x0200)
95 #define ASC_IS_BIG_ENDIAN (0x8000)
97 #define ASC_CHIP_MIN_VER_VL (0x01)
98 #define ASC_CHIP_MAX_VER_VL (0x07)
99 #define ASC_CHIP_MIN_VER_PCI (0x09)
100 #define ASC_CHIP_MAX_VER_PCI (0x0F)
101 #define ASC_CHIP_VER_PCI_BIT (0x08)
102 #define ASC_CHIP_VER_ASYN_BUG (0x21)
103 #define ASC_CHIP_VER_PCI 0x08
104 #define ASC_CHIP_VER_PCI_ULTRA_3150 (ASC_CHIP_VER_PCI | 0x02)
105 #define ASC_CHIP_VER_PCI_ULTRA_3050 (ASC_CHIP_VER_PCI | 0x03)
106 #define ASC_CHIP_MIN_VER_EISA (0x41)
107 #define ASC_CHIP_MAX_VER_EISA (0x47)
108 #define ASC_CHIP_VER_EISA_BIT (0x40)
109 #define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3)
110 #define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL)
111 #define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL)
113 #define ASC_SCSI_ID_BITS 3
114 #define ASC_SCSI_TIX_TYPE uchar
115 #define ASC_ALL_DEVICE_BIT_SET 0xFF
116 #define ASC_SCSI_BIT_ID_TYPE uchar
117 #define ASC_MAX_TID 7
118 #define ASC_MAX_LUN 7
119 #define ASC_SCSI_WIDTH_BIT_SET 0xFF
120 #define ASC_MAX_SENSE_LEN 32
121 #define ASC_MIN_SENSE_LEN 14
122 #define ASC_SCSI_RESET_HOLD_TIME_US 60
125 * Narrow boards only support 12-byte commands, while wide boards
126 * extend to 16-byte commands.
128 #define ASC_MAX_CDB_LEN 12
129 #define ADV_MAX_CDB_LEN 16
131 #define MS_SDTR_LEN 0x03
132 #define MS_WDTR_LEN 0x02
134 #define ASC_SG_LIST_PER_Q 7
136 #define QS_READY 0x01
137 #define QS_DISC1 0x02
138 #define QS_DISC2 0x04
140 #define QS_ABORTED 0x40
142 #define QC_NO_CALLBACK 0x01
143 #define QC_SG_SWAP_QUEUE 0x02
144 #define QC_SG_HEAD 0x04
145 #define QC_DATA_IN 0x08
146 #define QC_DATA_OUT 0x10
147 #define QC_URGENT 0x20
148 #define QC_MSG_OUT 0x40
149 #define QC_REQ_SENSE 0x80
150 #define QCSG_SG_XFER_LIST 0x02
151 #define QCSG_SG_XFER_MORE 0x04
152 #define QCSG_SG_XFER_END 0x08
153 #define QD_IN_PROGRESS 0x00
154 #define QD_NO_ERROR 0x01
155 #define QD_ABORTED_BY_HOST 0x02
156 #define QD_WITH_ERROR 0x04
157 #define QD_INVALID_REQUEST 0x80
158 #define QD_INVALID_HOST_NUM 0x81
159 #define QD_INVALID_DEVICE 0x82
160 #define QD_ERR_INTERNAL 0xFF
161 #define QHSTA_NO_ERROR 0x00
162 #define QHSTA_M_SEL_TIMEOUT 0x11
163 #define QHSTA_M_DATA_OVER_RUN 0x12
164 #define QHSTA_M_DATA_UNDER_RUN 0x12
165 #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13
166 #define QHSTA_M_BAD_BUS_PHASE_SEQ 0x14
167 #define QHSTA_D_QDONE_SG_LIST_CORRUPTED 0x21
168 #define QHSTA_D_ASC_DVC_ERROR_CODE_SET 0x22
169 #define QHSTA_D_HOST_ABORT_FAILED 0x23
170 #define QHSTA_D_EXE_SCSI_Q_FAILED 0x24
171 #define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT 0x25
172 #define QHSTA_D_ASPI_NO_BUF_POOL 0x26
173 #define QHSTA_M_WTM_TIMEOUT 0x41
174 #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42
175 #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43
176 #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44
177 #define QHSTA_M_TARGET_STATUS_BUSY 0x45
178 #define QHSTA_M_BAD_TAG_CODE 0x46
179 #define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY 0x47
180 #define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET 0x48
181 #define QHSTA_D_LRAM_CMP_ERROR 0x81
182 #define QHSTA_M_MICRO_CODE_ERROR_HALT 0xA1
183 #define ASC_FLAG_SCSIQ_REQ 0x01
184 #define ASC_FLAG_BIOS_SCSIQ_REQ 0x02
185 #define ASC_FLAG_BIOS_ASYNC_IO 0x04
186 #define ASC_FLAG_SRB_LINEAR_ADDR 0x08
187 #define ASC_FLAG_WIN16 0x10
188 #define ASC_FLAG_WIN32 0x20
189 #define ASC_FLAG_DOS_VM_CALLBACK 0x80
190 #define ASC_TAG_FLAG_EXTRA_BYTES 0x10
191 #define ASC_TAG_FLAG_DISABLE_DISCONNECT 0x04
192 #define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX 0x08
193 #define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST 0x40
194 #define ASC_SCSIQ_CPY_BEG 4
195 #define ASC_SCSIQ_SGHD_CPY_BEG 2
196 #define ASC_SCSIQ_B_FWD 0
197 #define ASC_SCSIQ_B_BWD 1
198 #define ASC_SCSIQ_B_STATUS 2
199 #define ASC_SCSIQ_B_QNO 3
200 #define ASC_SCSIQ_B_CNTL 4
201 #define ASC_SCSIQ_B_SG_QUEUE_CNT 5
202 #define ASC_SCSIQ_D_DATA_ADDR 8
203 #define ASC_SCSIQ_D_DATA_CNT 12
204 #define ASC_SCSIQ_B_SENSE_LEN 20
205 #define ASC_SCSIQ_DONE_INFO_BEG 22
206 #define ASC_SCSIQ_D_SRBPTR 22
207 #define ASC_SCSIQ_B_TARGET_IX 26
208 #define ASC_SCSIQ_B_CDB_LEN 28
209 #define ASC_SCSIQ_B_TAG_CODE 29
210 #define ASC_SCSIQ_W_VM_ID 30
211 #define ASC_SCSIQ_DONE_STATUS 32
212 #define ASC_SCSIQ_HOST_STATUS 33
213 #define ASC_SCSIQ_SCSI_STATUS 34
214 #define ASC_SCSIQ_CDB_BEG 36
215 #define ASC_SCSIQ_DW_REMAIN_XFER_ADDR 56
216 #define ASC_SCSIQ_DW_REMAIN_XFER_CNT 60
217 #define ASC_SCSIQ_B_FIRST_SG_WK_QP 48
218 #define ASC_SCSIQ_B_SG_WK_QP 49
219 #define ASC_SCSIQ_B_SG_WK_IX 50
220 #define ASC_SCSIQ_W_ALT_DC1 52
221 #define ASC_SCSIQ_B_LIST_CNT 6
222 #define ASC_SCSIQ_B_CUR_LIST_CNT 7
223 #define ASC_SGQ_B_SG_CNTL 4
224 #define ASC_SGQ_B_SG_HEAD_QP 5
225 #define ASC_SGQ_B_SG_LIST_CNT 6
226 #define ASC_SGQ_B_SG_CUR_LIST_CNT 7
227 #define ASC_SGQ_LIST_BEG 8
228 #define ASC_DEF_SCSI1_QNG 4
229 #define ASC_MAX_SCSI1_QNG 4
230 #define ASC_DEF_SCSI2_QNG 16
231 #define ASC_MAX_SCSI2_QNG 32
232 #define ASC_TAG_CODE_MASK 0x23
233 #define ASC_STOP_REQ_RISC_STOP 0x01
234 #define ASC_STOP_ACK_RISC_STOP 0x03
235 #define ASC_STOP_CLEAN_UP_BUSY_Q 0x10
236 #define ASC_STOP_CLEAN_UP_DISC_Q 0x20
237 #define ASC_STOP_HOST_REQ_RISC_HALT 0x40
238 #define ASC_TIDLUN_TO_IX(tid, lun) (ASC_SCSI_TIX_TYPE)((tid) + ((lun)<<ASC_SCSI_ID_BITS))
239 #define ASC_TID_TO_TARGET_ID(tid) (ASC_SCSI_BIT_ID_TYPE)(0x01 << (tid))
240 #define ASC_TIX_TO_TARGET_ID(tix) (0x01 << ((tix) & ASC_MAX_TID))
241 #define ASC_TIX_TO_TID(tix) ((tix) & ASC_MAX_TID)
242 #define ASC_TID_TO_TIX(tid) ((tid) & ASC_MAX_TID)
243 #define ASC_TIX_TO_LUN(tix) (((tix) >> ASC_SCSI_ID_BITS) & ASC_MAX_LUN)
244 #define ASC_QNO_TO_QADDR(q_no) ((ASC_QADR_BEG)+((int)(q_no) << 6))
246 typedef struct asc_scsiq_1 {
260 typedef struct asc_scsiq_2 {
269 typedef struct asc_scsiq_3 {
276 typedef struct asc_scsiq_4 {
277 uchar cdb[ASC_MAX_CDB_LEN];
278 uchar y_first_sg_list_qp;
279 uchar y_working_sg_qp;
280 uchar y_working_sg_ix;
283 ushort x_reconnect_rtn;
284 __le32 x_saved_data_addr;
285 __le32 x_saved_data_cnt;
288 typedef struct asc_q_done_info {
300 typedef struct asc_sg_list {
305 typedef struct asc_sg_head {
308 ushort entry_to_copy;
310 ASC_SG_LIST sg_list[];
313 typedef struct asc_scsi_q {
317 ASC_SG_HEAD *sg_head;
318 ushort remain_sg_entry_cnt;
319 ushort next_sg_index;
322 typedef struct asc_scsi_bios_req_q {
326 ASC_SG_HEAD *sg_head;
329 uchar cdb[ASC_MAX_CDB_LEN];
330 uchar sense[ASC_MIN_SENSE_LEN];
331 } ASC_SCSI_BIOS_REQ_Q;
333 typedef struct asc_risc_q {
342 typedef struct asc_sg_list_q {
348 uchar sg_cur_list_cnt;
351 typedef struct asc_risc_sg_list_q {
355 ASC_SG_LIST sg_list[7];
356 } ASC_RISC_SG_LIST_Q;
358 #define ASCQ_ERR_Q_STATUS 0x0D
359 #define ASCQ_ERR_CUR_QNG 0x17
360 #define ASCQ_ERR_SG_Q_LINKS 0x18
361 #define ASCQ_ERR_ISR_RE_ENTRY 0x1A
362 #define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B
363 #define ASCQ_ERR_ISR_ON_CRITICAL 0x1C
366 * Warning code values are set in ASC_DVC_VAR 'warn_code'.
368 #define ASC_WARN_NO_ERROR 0x0000
369 #define ASC_WARN_IO_PORT_ROTATE 0x0001
370 #define ASC_WARN_EEPROM_CHKSUM 0x0002
371 #define ASC_WARN_IRQ_MODIFIED 0x0004
372 #define ASC_WARN_AUTO_CONFIG 0x0008
373 #define ASC_WARN_CMD_QNG_CONFLICT 0x0010
374 #define ASC_WARN_EEPROM_RECOVER 0x0020
375 #define ASC_WARN_CFG_MSW_RECOVER 0x0040
378 * Error code values are set in {ASC/ADV}_DVC_VAR 'err_code'.
380 #define ASC_IERR_NO_CARRIER 0x0001 /* No more carrier memory */
381 #define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */
382 #define ASC_IERR_SET_PC_ADDR 0x0004
383 #define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */
384 #define ASC_IERR_ILLEGAL_CONNECTION 0x0010 /* Illegal cable connection */
385 #define ASC_IERR_SINGLE_END_DEVICE 0x0020 /* SE device on DIFF bus */
386 #define ASC_IERR_REVERSED_CABLE 0x0040 /* Narrow flat cable reversed */
387 #define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */
388 #define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */
389 #define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */
390 #define ASC_IERR_NO_BUS_TYPE 0x0400
391 #define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */
392 #define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */
393 #define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */
395 #define ASC_DEF_MAX_TOTAL_QNG (0xF0)
396 #define ASC_MIN_TAG_Q_PER_DVC (0x04)
397 #define ASC_MIN_FREE_Q (0x02)
398 #define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q))
399 #define ASC_MAX_TOTAL_QNG 240
400 #define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16
401 #define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8
402 #define ASC_MAX_PCI_INRAM_TOTAL_QNG 20
403 #define ASC_MAX_INRAM_TAG_QNG 16
404 #define ASC_IOADR_GAP 0x10
405 #define ASC_SYN_MAX_OFFSET 0x0F
406 #define ASC_DEF_SDTR_OFFSET 0x0F
407 #define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02
408 #define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41
410 /* The narrow chip only supports a limited selection of transfer rates.
411 * These are encoded in the range 0..7 or 0..15 depending whether the chip
412 * is Ultra-capable or not. These tables let us convert from one to the other.
414 static const unsigned char asc_syn_xfer_period[8] = {
415 25, 30, 35, 40, 50, 60, 70, 85
418 static const unsigned char asc_syn_ultra_xfer_period[16] = {
419 12, 19, 25, 32, 38, 44, 50, 57, 63, 69, 75, 82, 88, 94, 100, 107
422 typedef struct ext_msg {
428 uchar sdtr_xfer_period;
429 uchar sdtr_req_ack_offset;
444 #define xfer_period u_ext_msg.sdtr.sdtr_xfer_period
445 #define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset
446 #define wdtr_width u_ext_msg.wdtr.wdtr_width
447 #define mdp_b3 u_ext_msg.mdp_b3
448 #define mdp_b2 u_ext_msg.mdp_b2
449 #define mdp_b1 u_ext_msg.mdp_b1
450 #define mdp_b0 u_ext_msg.mdp_b0
452 typedef struct asc_dvc_cfg {
453 ASC_SCSI_BIT_ID_TYPE can_tagged_qng;
454 ASC_SCSI_BIT_ID_TYPE cmd_qng_enabled;
455 ASC_SCSI_BIT_ID_TYPE disc_enable;
456 ASC_SCSI_BIT_ID_TYPE sdtr_enable;
460 ushort mcode_version;
461 uchar max_tag_qng[ASC_MAX_TID + 1];
462 uchar sdtr_period_offset[ASC_MAX_TID + 1];
463 uchar adapter_info[6];
466 #define ASC_DEF_DVC_CNTL 0xFFFF
467 #define ASC_DEF_CHIP_SCSI_ID 7
468 #define ASC_DEF_ISA_DMA_SPEED 4
469 #define ASC_INIT_STATE_BEG_GET_CFG 0x0001
470 #define ASC_INIT_STATE_END_GET_CFG 0x0002
471 #define ASC_INIT_STATE_BEG_SET_CFG 0x0004
472 #define ASC_INIT_STATE_END_SET_CFG 0x0008
473 #define ASC_INIT_STATE_BEG_LOAD_MC 0x0010
474 #define ASC_INIT_STATE_END_LOAD_MC 0x0020
475 #define ASC_INIT_STATE_BEG_INQUIRY 0x0040
476 #define ASC_INIT_STATE_END_INQUIRY 0x0080
477 #define ASC_INIT_RESET_SCSI_DONE 0x0100
478 #define ASC_INIT_STATE_WITHOUT_EEP 0x8000
479 #define ASC_BUG_FIX_IF_NOT_DWB 0x0001
480 #define ASC_BUG_FIX_ASYN_USE_SYN 0x0002
481 #define ASC_MIN_TAGGED_CMD 7
482 #define ASC_MAX_SCSI_RESET_WAIT 30
483 #define ASC_OVERRUN_BSIZE 64
485 struct asc_dvc_var; /* Forward Declaration. */
487 typedef struct asc_dvc_var {
493 ASC_SCSI_BIT_ID_TYPE init_sdtr;
494 ASC_SCSI_BIT_ID_TYPE sdtr_done;
495 ASC_SCSI_BIT_ID_TYPE use_tagged_qng;
496 ASC_SCSI_BIT_ID_TYPE unit_not_ready;
497 ASC_SCSI_BIT_ID_TYPE queue_full_or_busy;
498 ASC_SCSI_BIT_ID_TYPE start_motor;
500 dma_addr_t overrun_dma;
501 uchar scsi_reset_wait;
506 uchar in_critical_cnt;
507 uchar last_q_shortage;
509 uchar cur_dvc_qng[ASC_MAX_TID + 1];
510 uchar max_dvc_qng[ASC_MAX_TID + 1];
511 ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID + 1];
512 ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID + 1];
513 const uchar *sdtr_period_tbl;
515 ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer_always;
518 uchar dos_int13_table[ASC_MAX_TID + 1];
519 unsigned int max_dma_count;
520 ASC_SCSI_BIT_ID_TYPE no_scam;
521 ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer;
522 uchar min_sdtr_index;
523 uchar max_sdtr_index;
524 struct asc_board *drv_ptr;
525 unsigned int uc_break;
528 typedef struct asc_dvc_inq_info {
529 uchar type[ASC_MAX_TID + 1][ASC_MAX_LUN + 1];
532 typedef struct asc_cap_info {
537 typedef struct asc_cap_info_array {
538 ASC_CAP_INFO cap_info[ASC_MAX_TID + 1][ASC_MAX_LUN + 1];
539 } ASC_CAP_INFO_ARRAY;
541 #define ASC_MCNTL_NO_SEL_TIMEOUT (ushort)0x0001
542 #define ASC_MCNTL_NULL_TARGET (ushort)0x0002
543 #define ASC_CNTL_INITIATOR (ushort)0x0001
544 #define ASC_CNTL_BIOS_GT_1GB (ushort)0x0002
545 #define ASC_CNTL_BIOS_GT_2_DISK (ushort)0x0004
546 #define ASC_CNTL_BIOS_REMOVABLE (ushort)0x0008
547 #define ASC_CNTL_NO_SCAM (ushort)0x0010
548 #define ASC_CNTL_INT_MULTI_Q (ushort)0x0080
549 #define ASC_CNTL_NO_LUN_SUPPORT (ushort)0x0040
550 #define ASC_CNTL_NO_VERIFY_COPY (ushort)0x0100
551 #define ASC_CNTL_RESET_SCSI (ushort)0x0200
552 #define ASC_CNTL_INIT_INQUIRY (ushort)0x0400
553 #define ASC_CNTL_INIT_VERBOSE (ushort)0x0800
554 #define ASC_CNTL_SCSI_PARITY (ushort)0x1000
555 #define ASC_CNTL_BURST_MODE (ushort)0x2000
556 #define ASC_CNTL_SDTR_ENABLE_ULTRA (ushort)0x4000
557 #define ASC_EEP_DVC_CFG_BEG_VL 2
558 #define ASC_EEP_MAX_DVC_ADDR_VL 15
559 #define ASC_EEP_DVC_CFG_BEG 32
560 #define ASC_EEP_MAX_DVC_ADDR 45
561 #define ASC_EEP_MAX_RETRY 20
564 * These macros keep the chip SCSI id bitfields in board order. C bitfields
565 * aren't portable between big and little-endian platforms so they are not used.
568 #define ASC_EEP_GET_CHIP_ID(cfg) ((cfg)->id_speed & 0x0f)
569 #define ASC_EEP_GET_DMA_SPD(cfg) (((cfg)->id_speed & 0xf0) >> 4)
570 #define ASC_EEP_SET_CHIP_ID(cfg, sid) \
571 ((cfg)->id_speed = ((cfg)->id_speed & 0xf0) | ((sid) & ASC_MAX_TID))
572 #define ASC_EEP_SET_DMA_SPD(cfg, spd) \
573 ((cfg)->id_speed = ((cfg)->id_speed & 0x0f) | ((spd) & 0x0f) << 4)
575 typedef struct asceep_config {
587 uchar id_speed; /* low order 4 bits is chip scsi id */
588 /* high order 4 bits is isa dma speed */
589 uchar dos_int13_table[ASC_MAX_TID + 1];
590 uchar adapter_info[6];
595 #define ASC_EEP_CMD_READ 0x80
596 #define ASC_EEP_CMD_WRITE 0x40
597 #define ASC_EEP_CMD_WRITE_ABLE 0x30
598 #define ASC_EEP_CMD_WRITE_DISABLE 0x00
599 #define ASCV_MSGOUT_BEG 0x0000
600 #define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3)
601 #define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4)
602 #define ASCV_BREAK_SAVED_CODE (ushort)0x0006
603 #define ASCV_MSGIN_BEG (ASCV_MSGOUT_BEG+8)
604 #define ASCV_MSGIN_SDTR_PERIOD (ASCV_MSGIN_BEG+3)
605 #define ASCV_MSGIN_SDTR_OFFSET (ASCV_MSGIN_BEG+4)
606 #define ASCV_SDTR_DATA_BEG (ASCV_MSGIN_BEG+8)
607 #define ASCV_SDTR_DONE_BEG (ASCV_SDTR_DATA_BEG+8)
608 #define ASCV_MAX_DVC_QNG_BEG (ushort)0x0020
609 #define ASCV_BREAK_ADDR (ushort)0x0028
610 #define ASCV_BREAK_NOTIFY_COUNT (ushort)0x002A
611 #define ASCV_BREAK_CONTROL (ushort)0x002C
612 #define ASCV_BREAK_HIT_COUNT (ushort)0x002E
614 #define ASCV_ASCDVC_ERR_CODE_W (ushort)0x0030
615 #define ASCV_MCODE_CHKSUM_W (ushort)0x0032
616 #define ASCV_MCODE_SIZE_W (ushort)0x0034
617 #define ASCV_STOP_CODE_B (ushort)0x0036
618 #define ASCV_DVC_ERR_CODE_B (ushort)0x0037
619 #define ASCV_OVERRUN_PADDR_D (ushort)0x0038
620 #define ASCV_OVERRUN_BSIZE_D (ushort)0x003C
621 #define ASCV_HALTCODE_W (ushort)0x0040
622 #define ASCV_CHKSUM_W (ushort)0x0042
623 #define ASCV_MC_DATE_W (ushort)0x0044
624 #define ASCV_MC_VER_W (ushort)0x0046
625 #define ASCV_NEXTRDY_B (ushort)0x0048
626 #define ASCV_DONENEXT_B (ushort)0x0049
627 #define ASCV_USE_TAGGED_QNG_B (ushort)0x004A
628 #define ASCV_SCSIBUSY_B (ushort)0x004B
629 #define ASCV_Q_DONE_IN_PROGRESS_B (ushort)0x004C
630 #define ASCV_CURCDB_B (ushort)0x004D
631 #define ASCV_RCLUN_B (ushort)0x004E
632 #define ASCV_BUSY_QHEAD_B (ushort)0x004F
633 #define ASCV_DISC1_QHEAD_B (ushort)0x0050
634 #define ASCV_DISC_ENABLE_B (ushort)0x0052
635 #define ASCV_CAN_TAGGED_QNG_B (ushort)0x0053
636 #define ASCV_HOSTSCSI_ID_B (ushort)0x0055
637 #define ASCV_MCODE_CNTL_B (ushort)0x0056
638 #define ASCV_NULL_TARGET_B (ushort)0x0057
639 #define ASCV_FREE_Q_HEAD_W (ushort)0x0058
640 #define ASCV_DONE_Q_TAIL_W (ushort)0x005A
641 #define ASCV_FREE_Q_HEAD_B (ushort)(ASCV_FREE_Q_HEAD_W+1)
642 #define ASCV_DONE_Q_TAIL_B (ushort)(ASCV_DONE_Q_TAIL_W+1)
643 #define ASCV_HOST_FLAG_B (ushort)0x005D
644 #define ASCV_TOTAL_READY_Q_B (ushort)0x0064
645 #define ASCV_VER_SERIAL_B (ushort)0x0065
646 #define ASCV_HALTCODE_SAVED_W (ushort)0x0066
647 #define ASCV_WTM_FLAG_B (ushort)0x0068
648 #define ASCV_RISC_FLAG_B (ushort)0x006A
649 #define ASCV_REQ_SG_LIST_QP (ushort)0x006B
650 #define ASC_HOST_FLAG_IN_ISR 0x01
651 #define ASC_HOST_FLAG_ACK_INT 0x02
652 #define ASC_RISC_FLAG_GEN_INT 0x01
653 #define ASC_RISC_FLAG_REQ_SG_LIST 0x02
654 #define IOP_CTRL (0x0F)
655 #define IOP_STATUS (0x0E)
656 #define IOP_INT_ACK IOP_STATUS
657 #define IOP_REG_IFC (0x0D)
658 #define IOP_SYN_OFFSET (0x0B)
659 #define IOP_EXTRA_CONTROL (0x0D)
660 #define IOP_REG_PC (0x0C)
661 #define IOP_RAM_ADDR (0x0A)
662 #define IOP_RAM_DATA (0x08)
663 #define IOP_EEP_DATA (0x06)
664 #define IOP_EEP_CMD (0x07)
665 #define IOP_VERSION (0x03)
666 #define IOP_CONFIG_HIGH (0x04)
667 #define IOP_CONFIG_LOW (0x02)
668 #define IOP_SIG_BYTE (0x01)
669 #define IOP_SIG_WORD (0x00)
670 #define IOP_REG_DC1 (0x0E)
671 #define IOP_REG_DC0 (0x0C)
672 #define IOP_REG_SB (0x0B)
673 #define IOP_REG_DA1 (0x0A)
674 #define IOP_REG_DA0 (0x08)
675 #define IOP_REG_SC (0x09)
676 #define IOP_DMA_SPEED (0x07)
677 #define IOP_REG_FLAG (0x07)
678 #define IOP_FIFO_H (0x06)
679 #define IOP_FIFO_L (0x04)
680 #define IOP_REG_ID (0x05)
681 #define IOP_REG_QP (0x03)
682 #define IOP_REG_IH (0x02)
683 #define IOP_REG_IX (0x01)
684 #define IOP_REG_AX (0x00)
685 #define IFC_REG_LOCK (0x00)
686 #define IFC_REG_UNLOCK (0x09)
687 #define IFC_WR_EN_FILTER (0x10)
688 #define IFC_RD_NO_EEPROM (0x10)
689 #define IFC_SLEW_RATE (0x20)
690 #define IFC_ACT_NEG (0x40)
691 #define IFC_INP_FILTER (0x80)
692 #define IFC_INIT_DEFAULT (IFC_ACT_NEG | IFC_REG_UNLOCK)
693 #define SC_SEL (uchar)(0x80)
694 #define SC_BSY (uchar)(0x40)
695 #define SC_ACK (uchar)(0x20)
696 #define SC_REQ (uchar)(0x10)
697 #define SC_ATN (uchar)(0x08)
698 #define SC_IO (uchar)(0x04)
699 #define SC_CD (uchar)(0x02)
700 #define SC_MSG (uchar)(0x01)
701 #define SEC_SCSI_CTL (uchar)(0x80)
702 #define SEC_ACTIVE_NEGATE (uchar)(0x40)
703 #define SEC_SLEW_RATE (uchar)(0x20)
704 #define SEC_ENABLE_FILTER (uchar)(0x10)
705 #define ASC_HALT_EXTMSG_IN (ushort)0x8000
706 #define ASC_HALT_CHK_CONDITION (ushort)0x8100
707 #define ASC_HALT_SS_QUEUE_FULL (ushort)0x8200
708 #define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX (ushort)0x8300
709 #define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX (ushort)0x8400
710 #define ASC_HALT_SDTR_REJECTED (ushort)0x4000
711 #define ASC_HALT_HOST_COPY_SG_LIST_TO_RISC ( ushort )0x2000
712 #define ASC_MAX_QNO 0xF8
713 #define ASC_DATA_SEC_BEG (ushort)0x0080
714 #define ASC_DATA_SEC_END (ushort)0x0080
715 #define ASC_CODE_SEC_BEG (ushort)0x0080
716 #define ASC_CODE_SEC_END (ushort)0x0080
717 #define ASC_QADR_BEG (0x4000)
718 #define ASC_QADR_USED (ushort)(ASC_MAX_QNO * 64)
719 #define ASC_QADR_END (ushort)0x7FFF
720 #define ASC_QLAST_ADR (ushort)0x7FC0
721 #define ASC_QBLK_SIZE 0x40
722 #define ASC_BIOS_DATA_QBEG 0xF8
723 #define ASC_MIN_ACTIVE_QNO 0x01
724 #define ASC_QLINK_END 0xFF
725 #define ASC_EEPROM_WORDS 0x10
726 #define ASC_MAX_MGS_LEN 0x10
727 #define ASC_BIOS_ADDR_DEF 0xDC00
728 #define ASC_BIOS_SIZE 0x3800
729 #define ASC_BIOS_RAM_OFF 0x3800
730 #define ASC_BIOS_RAM_SIZE 0x800
731 #define ASC_BIOS_MIN_ADDR 0xC000
732 #define ASC_BIOS_MAX_ADDR 0xEC00
733 #define ASC_BIOS_BANK_SIZE 0x0400
734 #define ASC_MCODE_START_ADDR 0x0080
735 #define ASC_CFG0_HOST_INT_ON 0x0020
736 #define ASC_CFG0_BIOS_ON 0x0040
737 #define ASC_CFG0_VERA_BURST_ON 0x0080
738 #define ASC_CFG0_SCSI_PARITY_ON 0x0800
739 #define ASC_CFG1_SCSI_TARGET_ON 0x0080
740 #define ASC_CFG1_LRAM_8BITS_ON 0x0800
741 #define ASC_CFG_MSW_CLR_MASK 0x3080
742 #define CSW_TEST1 (ASC_CS_TYPE)0x8000
743 #define CSW_AUTO_CONFIG (ASC_CS_TYPE)0x4000
744 #define CSW_RESERVED1 (ASC_CS_TYPE)0x2000
745 #define CSW_IRQ_WRITTEN (ASC_CS_TYPE)0x1000
746 #define CSW_33MHZ_SELECTED (ASC_CS_TYPE)0x0800
747 #define CSW_TEST2 (ASC_CS_TYPE)0x0400
748 #define CSW_TEST3 (ASC_CS_TYPE)0x0200
749 #define CSW_RESERVED2 (ASC_CS_TYPE)0x0100
750 #define CSW_DMA_DONE (ASC_CS_TYPE)0x0080
751 #define CSW_FIFO_RDY (ASC_CS_TYPE)0x0040
752 #define CSW_EEP_READ_DONE (ASC_CS_TYPE)0x0020
753 #define CSW_HALTED (ASC_CS_TYPE)0x0010
754 #define CSW_SCSI_RESET_ACTIVE (ASC_CS_TYPE)0x0008
755 #define CSW_PARITY_ERR (ASC_CS_TYPE)0x0004
756 #define CSW_SCSI_RESET_LATCH (ASC_CS_TYPE)0x0002
757 #define CSW_INT_PENDING (ASC_CS_TYPE)0x0001
758 #define CIW_CLR_SCSI_RESET_INT (ASC_CS_TYPE)0x1000
759 #define CIW_INT_ACK (ASC_CS_TYPE)0x0100
760 #define CIW_TEST1 (ASC_CS_TYPE)0x0200
761 #define CIW_TEST2 (ASC_CS_TYPE)0x0400
762 #define CIW_SEL_33MHZ (ASC_CS_TYPE)0x0800
763 #define CIW_IRQ_ACT (ASC_CS_TYPE)0x1000
764 #define CC_CHIP_RESET (uchar)0x80
765 #define CC_SCSI_RESET (uchar)0x40
766 #define CC_HALT (uchar)0x20
767 #define CC_SINGLE_STEP (uchar)0x10
768 #define CC_DMA_ABLE (uchar)0x08
769 #define CC_TEST (uchar)0x04
770 #define CC_BANK_ONE (uchar)0x02
771 #define CC_DIAG (uchar)0x01
772 #define ASC_1000_ID0W 0x04C1
773 #define ASC_1000_ID0W_FIX 0x00C1
774 #define ASC_1000_ID1B 0x25
775 #define ASC_EISA_REV_IOP_MASK (0x0C83)
776 #define ASC_EISA_CFG_IOP_MASK (0x0C86)
777 #define ASC_GET_EISA_SLOT(iop) (PortAddr)((iop) & 0xF000)
778 #define INS_HALTINT (ushort)0x6281
779 #define INS_HALT (ushort)0x6280
780 #define INS_SINT (ushort)0x6200
781 #define INS_RFLAG_WTM (ushort)0x7380
782 #define ASC_MC_SAVE_CODE_WSIZE 0x500
783 #define ASC_MC_SAVE_DATA_WSIZE 0x40
785 typedef struct asc_mc_saved {
786 ushort data[ASC_MC_SAVE_DATA_WSIZE];
787 ushort code[ASC_MC_SAVE_CODE_WSIZE];
790 #define AscGetQDoneInProgress(port) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B)
791 #define AscPutQDoneInProgress(port, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B, val)
792 #define AscGetVarFreeQHead(port) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W)
793 #define AscGetVarDoneQTail(port) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W)
794 #define AscPutVarFreeQHead(port, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W, val)
795 #define AscPutVarDoneQTail(port, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W, val)
796 #define AscGetRiscVarFreeQHead(port) AscReadLramByte((port), ASCV_NEXTRDY_B)
797 #define AscGetRiscVarDoneQTail(port) AscReadLramByte((port), ASCV_DONENEXT_B)
798 #define AscPutRiscVarFreeQHead(port, val) AscWriteLramByte((port), ASCV_NEXTRDY_B, val)
799 #define AscPutRiscVarDoneQTail(port, val) AscWriteLramByte((port), ASCV_DONENEXT_B, val)
800 #define AscPutMCodeSDTRDoneAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id), (data))
801 #define AscGetMCodeSDTRDoneAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id))
802 #define AscPutMCodeInitSDTRAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id), data)
803 #define AscGetMCodeInitSDTRAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id))
804 #define AscGetChipSignatureByte(port) (uchar)inp((port)+IOP_SIG_BYTE)
805 #define AscGetChipSignatureWord(port) (ushort)inpw((port)+IOP_SIG_WORD)
806 #define AscGetChipVerNo(port) (uchar)inp((port)+IOP_VERSION)
807 #define AscGetChipCfgLsw(port) (ushort)inpw((port)+IOP_CONFIG_LOW)
808 #define AscGetChipCfgMsw(port) (ushort)inpw((port)+IOP_CONFIG_HIGH)
809 #define AscSetChipCfgLsw(port, data) outpw((port)+IOP_CONFIG_LOW, data)
810 #define AscSetChipCfgMsw(port, data) outpw((port)+IOP_CONFIG_HIGH, data)
811 #define AscGetChipEEPCmd(port) (uchar)inp((port)+IOP_EEP_CMD)
812 #define AscSetChipEEPCmd(port, data) outp((port)+IOP_EEP_CMD, data)
813 #define AscGetChipEEPData(port) (ushort)inpw((port)+IOP_EEP_DATA)
814 #define AscSetChipEEPData(port, data) outpw((port)+IOP_EEP_DATA, data)
815 #define AscGetChipLramAddr(port) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR))
816 #define AscSetChipLramAddr(port, addr) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr)
817 #define AscGetChipLramData(port) (ushort)inpw((port)+IOP_RAM_DATA)
818 #define AscSetChipLramData(port, data) outpw((port)+IOP_RAM_DATA, data)
819 #define AscGetChipIFC(port) (uchar)inp((port)+IOP_REG_IFC)
820 #define AscSetChipIFC(port, data) outp((port)+IOP_REG_IFC, data)
821 #define AscGetChipStatus(port) (ASC_CS_TYPE)inpw((port)+IOP_STATUS)
822 #define AscSetChipStatus(port, cs_val) outpw((port)+IOP_STATUS, cs_val)
823 #define AscGetChipControl(port) (uchar)inp((port)+IOP_CTRL)
824 #define AscSetChipControl(port, cc_val) outp((port)+IOP_CTRL, cc_val)
825 #define AscGetChipSyn(port) (uchar)inp((port)+IOP_SYN_OFFSET)
826 #define AscSetChipSyn(port, data) outp((port)+IOP_SYN_OFFSET, data)
827 #define AscSetPCAddr(port, data) outpw((port)+IOP_REG_PC, data)
828 #define AscGetPCAddr(port) (ushort)inpw((port)+IOP_REG_PC)
829 #define AscIsIntPending(port) (AscGetChipStatus(port) & (CSW_INT_PENDING | CSW_SCSI_RESET_LATCH))
830 #define AscGetChipScsiID(port) ((AscGetChipCfgLsw(port) >> 8) & ASC_MAX_TID)
831 #define AscGetExtraControl(port) (uchar)inp((port)+IOP_EXTRA_CONTROL)
832 #define AscSetExtraControl(port, data) outp((port)+IOP_EXTRA_CONTROL, data)
833 #define AscReadChipAX(port) (ushort)inpw((port)+IOP_REG_AX)
834 #define AscWriteChipAX(port, data) outpw((port)+IOP_REG_AX, data)
835 #define AscReadChipIX(port) (uchar)inp((port)+IOP_REG_IX)
836 #define AscWriteChipIX(port, data) outp((port)+IOP_REG_IX, data)
837 #define AscReadChipIH(port) (ushort)inpw((port)+IOP_REG_IH)
838 #define AscWriteChipIH(port, data) outpw((port)+IOP_REG_IH, data)
839 #define AscReadChipQP(port) (uchar)inp((port)+IOP_REG_QP)
840 #define AscWriteChipQP(port, data) outp((port)+IOP_REG_QP, data)
841 #define AscReadChipFIFO_L(port) (ushort)inpw((port)+IOP_REG_FIFO_L)
842 #define AscWriteChipFIFO_L(port, data) outpw((port)+IOP_REG_FIFO_L, data)
843 #define AscReadChipFIFO_H(port) (ushort)inpw((port)+IOP_REG_FIFO_H)
844 #define AscWriteChipFIFO_H(port, data) outpw((port)+IOP_REG_FIFO_H, data)
845 #define AscReadChipDmaSpeed(port) (uchar)inp((port)+IOP_DMA_SPEED)
846 #define AscWriteChipDmaSpeed(port, data) outp((port)+IOP_DMA_SPEED, data)
847 #define AscReadChipDA0(port) (ushort)inpw((port)+IOP_REG_DA0)
848 #define AscWriteChipDA0(port) outpw((port)+IOP_REG_DA0, data)
849 #define AscReadChipDA1(port) (ushort)inpw((port)+IOP_REG_DA1)
850 #define AscWriteChipDA1(port) outpw((port)+IOP_REG_DA1, data)
851 #define AscReadChipDC0(port) (ushort)inpw((port)+IOP_REG_DC0)
852 #define AscWriteChipDC0(port) outpw((port)+IOP_REG_DC0, data)
853 #define AscReadChipDC1(port) (ushort)inpw((port)+IOP_REG_DC1)
854 #define AscWriteChipDC1(port) outpw((port)+IOP_REG_DC1, data)
855 #define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID)
856 #define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data)
858 #define AdvPortAddr void __iomem * /* Virtual memory address size */
861 * Define Adv Library required memory access macros.
863 #define ADV_MEM_READB(addr) readb(addr)
864 #define ADV_MEM_READW(addr) readw(addr)
865 #define ADV_MEM_WRITEB(addr, byte) writeb(byte, addr)
866 #define ADV_MEM_WRITEW(addr, word) writew(word, addr)
867 #define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr)
870 * Define total number of simultaneous maximum element scatter-gather
871 * request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the
872 * maximum number of outstanding commands per wide host adapter. Each
873 * command uses one or more ADV_SG_BLOCK each with 15 scatter-gather
874 * elements. Allow each command to have at least one ADV_SG_BLOCK structure.
875 * This allows about 15 commands to have the maximum 17 ADV_SG_BLOCK
876 * structures or 255 scatter-gather elements.
878 #define ADV_TOT_SG_BLOCK ASC_DEF_MAX_HOST_QNG
881 * Define maximum number of scatter-gather elements per request.
883 #define ADV_MAX_SG_LIST 255
884 #define NO_OF_SG_PER_BLOCK 15
886 #define ADV_EEP_DVC_CFG_BEGIN (0x00)
887 #define ADV_EEP_DVC_CFG_END (0x15)
888 #define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */
889 #define ADV_EEP_MAX_WORD_ADDR (0x1E)
891 #define ADV_EEP_DELAY_MS 100
893 #define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */
894 #define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */
896 * For the ASC3550 Bit 13 is Termination Polarity control bit.
897 * For later ICs Bit 13 controls whether the CIS (Card Information
898 * Service Section) is loaded from EEPROM.
900 #define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */
901 #define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */
905 * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify
906 * INT A in the PCI Configuration Space Int Pin field. If it is 1, then
907 * Function 0 will specify INT B.
909 * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify
910 * INT B in the PCI Configuration Space Int Pin field. If it is 1, then
911 * Function 1 will specify INT A.
913 #define ADV_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */
915 typedef struct adveep_3550_config {
916 /* Word Offset, Description */
918 ushort cfg_lsw; /* 00 power up initialization */
919 /* bit 13 set - Term Polarity Control */
920 /* bit 14 set - BIOS Enable */
921 /* bit 15 set - Big Endian Mode */
922 ushort cfg_msw; /* 01 unused */
923 ushort disc_enable; /* 02 disconnect enable */
924 ushort wdtr_able; /* 03 Wide DTR able */
925 ushort sdtr_able; /* 04 Synchronous DTR able */
926 ushort start_motor; /* 05 send start up motor */
927 ushort tagqng_able; /* 06 tag queuing able */
928 ushort bios_scan; /* 07 BIOS device control */
929 ushort scam_tolerant; /* 08 no scam */
931 uchar adapter_scsi_id; /* 09 Host Adapter ID */
932 uchar bios_boot_delay; /* power up wait */
934 uchar scsi_reset_delay; /* 10 reset delay */
935 uchar bios_id_lun; /* first boot device scsi id & lun */
936 /* high nibble is lun */
937 /* low nibble is scsi id */
939 uchar termination; /* 11 0 - automatic */
940 /* 1 - low off / high off */
941 /* 2 - low off / high on */
942 /* 3 - low on / high on */
943 /* There is no low on / high off */
945 uchar reserved1; /* reserved byte (not used) */
947 ushort bios_ctrl; /* 12 BIOS control bits */
948 /* bit 0 BIOS don't act as initiator. */
949 /* bit 1 BIOS > 1 GB support */
950 /* bit 2 BIOS > 2 Disk Support */
951 /* bit 3 BIOS don't support removables */
952 /* bit 4 BIOS support bootable CD */
953 /* bit 5 BIOS scan enabled */
954 /* bit 6 BIOS support multiple LUNs */
955 /* bit 7 BIOS display of message */
956 /* bit 8 SCAM disabled */
957 /* bit 9 Reset SCSI bus during init. */
959 /* bit 11 No verbose initialization. */
960 /* bit 12 SCSI parity enabled */
964 ushort ultra_able; /* 13 ULTRA speed able */
965 ushort reserved2; /* 14 reserved */
966 uchar max_host_qng; /* 15 maximum host queuing */
967 uchar max_dvc_qng; /* maximum per device queuing */
968 ushort dvc_cntl; /* 16 control bit for driver */
969 ushort bug_fix; /* 17 control bit for bug fix */
970 ushort serial_number_word1; /* 18 Board serial number word 1 */
971 ushort serial_number_word2; /* 19 Board serial number word 2 */
972 ushort serial_number_word3; /* 20 Board serial number word 3 */
973 ushort check_sum; /* 21 EEP check sum */
974 uchar oem_name[16]; /* 22 OEM name */
975 ushort dvc_err_code; /* 30 last device driver error code */
976 ushort adv_err_code; /* 31 last uc and Adv Lib error code */
977 ushort adv_err_addr; /* 32 last uc error address */
978 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
979 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
980 ushort saved_adv_err_addr; /* 35 saved last uc error address */
981 ushort num_of_err; /* 36 number of error */
982 } ADVEEP_3550_CONFIG;
984 typedef struct adveep_38C0800_config {
985 /* Word Offset, Description */
987 ushort cfg_lsw; /* 00 power up initialization */
988 /* bit 13 set - Load CIS */
989 /* bit 14 set - BIOS Enable */
990 /* bit 15 set - Big Endian Mode */
991 ushort cfg_msw; /* 01 unused */
992 ushort disc_enable; /* 02 disconnect enable */
993 ushort wdtr_able; /* 03 Wide DTR able */
994 ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */
995 ushort start_motor; /* 05 send start up motor */
996 ushort tagqng_able; /* 06 tag queuing able */
997 ushort bios_scan; /* 07 BIOS device control */
998 ushort scam_tolerant; /* 08 no scam */
1000 uchar adapter_scsi_id; /* 09 Host Adapter ID */
1001 uchar bios_boot_delay; /* power up wait */
1003 uchar scsi_reset_delay; /* 10 reset delay */
1004 uchar bios_id_lun; /* first boot device scsi id & lun */
1005 /* high nibble is lun */
1006 /* low nibble is scsi id */
1008 uchar termination_se; /* 11 0 - automatic */
1009 /* 1 - low off / high off */
1010 /* 2 - low off / high on */
1011 /* 3 - low on / high on */
1012 /* There is no low on / high off */
1014 uchar termination_lvd; /* 11 0 - automatic */
1015 /* 1 - low off / high off */
1016 /* 2 - low off / high on */
1017 /* 3 - low on / high on */
1018 /* There is no low on / high off */
1020 ushort bios_ctrl; /* 12 BIOS control bits */
1021 /* bit 0 BIOS don't act as initiator. */
1022 /* bit 1 BIOS > 1 GB support */
1023 /* bit 2 BIOS > 2 Disk Support */
1024 /* bit 3 BIOS don't support removables */
1025 /* bit 4 BIOS support bootable CD */
1026 /* bit 5 BIOS scan enabled */
1027 /* bit 6 BIOS support multiple LUNs */
1028 /* bit 7 BIOS display of message */
1029 /* bit 8 SCAM disabled */
1030 /* bit 9 Reset SCSI bus during init. */
1032 /* bit 11 No verbose initialization. */
1033 /* bit 12 SCSI parity enabled */
1037 ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */
1038 ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */
1039 uchar max_host_qng; /* 15 maximum host queueing */
1040 uchar max_dvc_qng; /* maximum per device queuing */
1041 ushort dvc_cntl; /* 16 control bit for driver */
1042 ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */
1043 ushort serial_number_word1; /* 18 Board serial number word 1 */
1044 ushort serial_number_word2; /* 19 Board serial number word 2 */
1045 ushort serial_number_word3; /* 20 Board serial number word 3 */
1046 ushort check_sum; /* 21 EEP check sum */
1047 uchar oem_name[16]; /* 22 OEM name */
1048 ushort dvc_err_code; /* 30 last device driver error code */
1049 ushort adv_err_code; /* 31 last uc and Adv Lib error code */
1050 ushort adv_err_addr; /* 32 last uc error address */
1051 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
1052 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
1053 ushort saved_adv_err_addr; /* 35 saved last uc error address */
1054 ushort reserved36; /* 36 reserved */
1055 ushort reserved37; /* 37 reserved */
1056 ushort reserved38; /* 38 reserved */
1057 ushort reserved39; /* 39 reserved */
1058 ushort reserved40; /* 40 reserved */
1059 ushort reserved41; /* 41 reserved */
1060 ushort reserved42; /* 42 reserved */
1061 ushort reserved43; /* 43 reserved */
1062 ushort reserved44; /* 44 reserved */
1063 ushort reserved45; /* 45 reserved */
1064 ushort reserved46; /* 46 reserved */
1065 ushort reserved47; /* 47 reserved */
1066 ushort reserved48; /* 48 reserved */
1067 ushort reserved49; /* 49 reserved */
1068 ushort reserved50; /* 50 reserved */
1069 ushort reserved51; /* 51 reserved */
1070 ushort reserved52; /* 52 reserved */
1071 ushort reserved53; /* 53 reserved */
1072 ushort reserved54; /* 54 reserved */
1073 ushort reserved55; /* 55 reserved */
1074 ushort cisptr_lsw; /* 56 CIS PTR LSW */
1075 ushort cisprt_msw; /* 57 CIS PTR MSW */
1076 ushort subsysvid; /* 58 SubSystem Vendor ID */
1077 ushort subsysid; /* 59 SubSystem ID */
1078 ushort reserved60; /* 60 reserved */
1079 ushort reserved61; /* 61 reserved */
1080 ushort reserved62; /* 62 reserved */
1081 ushort reserved63; /* 63 reserved */
1082 } ADVEEP_38C0800_CONFIG;
1084 typedef struct adveep_38C1600_config {
1085 /* Word Offset, Description */
1087 ushort cfg_lsw; /* 00 power up initialization */
1088 /* bit 11 set - Func. 0 INTB, Func. 1 INTA */
1089 /* clear - Func. 0 INTA, Func. 1 INTB */
1090 /* bit 13 set - Load CIS */
1091 /* bit 14 set - BIOS Enable */
1092 /* bit 15 set - Big Endian Mode */
1093 ushort cfg_msw; /* 01 unused */
1094 ushort disc_enable; /* 02 disconnect enable */
1095 ushort wdtr_able; /* 03 Wide DTR able */
1096 ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */
1097 ushort start_motor; /* 05 send start up motor */
1098 ushort tagqng_able; /* 06 tag queuing able */
1099 ushort bios_scan; /* 07 BIOS device control */
1100 ushort scam_tolerant; /* 08 no scam */
1102 uchar adapter_scsi_id; /* 09 Host Adapter ID */
1103 uchar bios_boot_delay; /* power up wait */
1105 uchar scsi_reset_delay; /* 10 reset delay */
1106 uchar bios_id_lun; /* first boot device scsi id & lun */
1107 /* high nibble is lun */
1108 /* low nibble is scsi id */
1110 uchar termination_se; /* 11 0 - automatic */
1111 /* 1 - low off / high off */
1112 /* 2 - low off / high on */
1113 /* 3 - low on / high on */
1114 /* There is no low on / high off */
1116 uchar termination_lvd; /* 11 0 - automatic */
1117 /* 1 - low off / high off */
1118 /* 2 - low off / high on */
1119 /* 3 - low on / high on */
1120 /* There is no low on / high off */
1122 ushort bios_ctrl; /* 12 BIOS control bits */
1123 /* bit 0 BIOS don't act as initiator. */
1124 /* bit 1 BIOS > 1 GB support */
1125 /* bit 2 BIOS > 2 Disk Support */
1126 /* bit 3 BIOS don't support removables */
1127 /* bit 4 BIOS support bootable CD */
1128 /* bit 5 BIOS scan enabled */
1129 /* bit 6 BIOS support multiple LUNs */
1130 /* bit 7 BIOS display of message */
1131 /* bit 8 SCAM disabled */
1132 /* bit 9 Reset SCSI bus during init. */
1133 /* bit 10 Basic Integrity Checking disabled */
1134 /* bit 11 No verbose initialization. */
1135 /* bit 12 SCSI parity enabled */
1136 /* bit 13 AIPP (Asyn. Info. Ph. Prot.) dis. */
1139 ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */
1140 ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */
1141 uchar max_host_qng; /* 15 maximum host queueing */
1142 uchar max_dvc_qng; /* maximum per device queuing */
1143 ushort dvc_cntl; /* 16 control bit for driver */
1144 ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */
1145 ushort serial_number_word1; /* 18 Board serial number word 1 */
1146 ushort serial_number_word2; /* 19 Board serial number word 2 */
1147 ushort serial_number_word3; /* 20 Board serial number word 3 */
1148 ushort check_sum; /* 21 EEP check sum */
1149 uchar oem_name[16]; /* 22 OEM name */
1150 ushort dvc_err_code; /* 30 last device driver error code */
1151 ushort adv_err_code; /* 31 last uc and Adv Lib error code */
1152 ushort adv_err_addr; /* 32 last uc error address */
1153 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
1154 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
1155 ushort saved_adv_err_addr; /* 35 saved last uc error address */
1156 ushort reserved36; /* 36 reserved */
1157 ushort reserved37; /* 37 reserved */
1158 ushort reserved38; /* 38 reserved */
1159 ushort reserved39; /* 39 reserved */
1160 ushort reserved40; /* 40 reserved */
1161 ushort reserved41; /* 41 reserved */
1162 ushort reserved42; /* 42 reserved */
1163 ushort reserved43; /* 43 reserved */
1164 ushort reserved44; /* 44 reserved */
1165 ushort reserved45; /* 45 reserved */
1166 ushort reserved46; /* 46 reserved */
1167 ushort reserved47; /* 47 reserved */
1168 ushort reserved48; /* 48 reserved */
1169 ushort reserved49; /* 49 reserved */
1170 ushort reserved50; /* 50 reserved */
1171 ushort reserved51; /* 51 reserved */
1172 ushort reserved52; /* 52 reserved */
1173 ushort reserved53; /* 53 reserved */
1174 ushort reserved54; /* 54 reserved */
1175 ushort reserved55; /* 55 reserved */
1176 ushort cisptr_lsw; /* 56 CIS PTR LSW */
1177 ushort cisprt_msw; /* 57 CIS PTR MSW */
1178 ushort subsysvid; /* 58 SubSystem Vendor ID */
1179 ushort subsysid; /* 59 SubSystem ID */
1180 ushort reserved60; /* 60 reserved */
1181 ushort reserved61; /* 61 reserved */
1182 ushort reserved62; /* 62 reserved */
1183 ushort reserved63; /* 63 reserved */
1184 } ADVEEP_38C1600_CONFIG;
1189 #define ASC_EEP_CMD_DONE 0x0200
1192 #define BIOS_CTRL_BIOS 0x0001
1193 #define BIOS_CTRL_EXTENDED_XLAT 0x0002
1194 #define BIOS_CTRL_GT_2_DISK 0x0004
1195 #define BIOS_CTRL_BIOS_REMOVABLE 0x0008
1196 #define BIOS_CTRL_BOOTABLE_CD 0x0010
1197 #define BIOS_CTRL_MULTIPLE_LUN 0x0040
1198 #define BIOS_CTRL_DISPLAY_MSG 0x0080
1199 #define BIOS_CTRL_NO_SCAM 0x0100
1200 #define BIOS_CTRL_RESET_SCSI_BUS 0x0200
1201 #define BIOS_CTRL_INIT_VERBOSE 0x0800
1202 #define BIOS_CTRL_SCSI_PARITY 0x1000
1203 #define BIOS_CTRL_AIPP_DIS 0x2000
1205 #define ADV_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */
1207 #define ADV_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */
1210 * XXX - Since ASC38C1600 Rev.3 has a local RAM failure issue, there is
1211 * a special 16K Adv Library and Microcode version. After the issue is
1212 * resolved, should restore 32K support.
1214 * #define ADV_38C1600_MEMSIZE 0x8000L * 32 KB Internal Memory *
1216 #define ADV_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */
1219 * Byte I/O register address from base of 'iop_base'.
1221 #define IOPB_INTR_STATUS_REG 0x00
1222 #define IOPB_CHIP_ID_1 0x01
1223 #define IOPB_INTR_ENABLES 0x02
1224 #define IOPB_CHIP_TYPE_REV 0x03
1225 #define IOPB_RES_ADDR_4 0x04
1226 #define IOPB_RES_ADDR_5 0x05
1227 #define IOPB_RAM_DATA 0x06
1228 #define IOPB_RES_ADDR_7 0x07
1229 #define IOPB_FLAG_REG 0x08
1230 #define IOPB_RES_ADDR_9 0x09
1231 #define IOPB_RISC_CSR 0x0A
1232 #define IOPB_RES_ADDR_B 0x0B
1233 #define IOPB_RES_ADDR_C 0x0C
1234 #define IOPB_RES_ADDR_D 0x0D
1235 #define IOPB_SOFT_OVER_WR 0x0E
1236 #define IOPB_RES_ADDR_F 0x0F
1237 #define IOPB_MEM_CFG 0x10
1238 #define IOPB_RES_ADDR_11 0x11
1239 #define IOPB_GPIO_DATA 0x12
1240 #define IOPB_RES_ADDR_13 0x13
1241 #define IOPB_FLASH_PAGE 0x14
1242 #define IOPB_RES_ADDR_15 0x15
1243 #define IOPB_GPIO_CNTL 0x16
1244 #define IOPB_RES_ADDR_17 0x17
1245 #define IOPB_FLASH_DATA 0x18
1246 #define IOPB_RES_ADDR_19 0x19
1247 #define IOPB_RES_ADDR_1A 0x1A
1248 #define IOPB_RES_ADDR_1B 0x1B
1249 #define IOPB_RES_ADDR_1C 0x1C
1250 #define IOPB_RES_ADDR_1D 0x1D
1251 #define IOPB_RES_ADDR_1E 0x1E
1252 #define IOPB_RES_ADDR_1F 0x1F
1253 #define IOPB_DMA_CFG0 0x20
1254 #define IOPB_DMA_CFG1 0x21
1255 #define IOPB_TICKLE 0x22
1256 #define IOPB_DMA_REG_WR 0x23
1257 #define IOPB_SDMA_STATUS 0x24
1258 #define IOPB_SCSI_BYTE_CNT 0x25
1259 #define IOPB_HOST_BYTE_CNT 0x26
1260 #define IOPB_BYTE_LEFT_TO_XFER 0x27
1261 #define IOPB_BYTE_TO_XFER_0 0x28
1262 #define IOPB_BYTE_TO_XFER_1 0x29
1263 #define IOPB_BYTE_TO_XFER_2 0x2A
1264 #define IOPB_BYTE_TO_XFER_3 0x2B
1265 #define IOPB_ACC_GRP 0x2C
1266 #define IOPB_RES_ADDR_2D 0x2D
1267 #define IOPB_DEV_ID 0x2E
1268 #define IOPB_RES_ADDR_2F 0x2F
1269 #define IOPB_SCSI_DATA 0x30
1270 #define IOPB_RES_ADDR_31 0x31
1271 #define IOPB_RES_ADDR_32 0x32
1272 #define IOPB_SCSI_DATA_HSHK 0x33
1273 #define IOPB_SCSI_CTRL 0x34
1274 #define IOPB_RES_ADDR_35 0x35
1275 #define IOPB_RES_ADDR_36 0x36
1276 #define IOPB_RES_ADDR_37 0x37
1277 #define IOPB_RAM_BIST 0x38
1278 #define IOPB_PLL_TEST 0x39
1279 #define IOPB_PCI_INT_CFG 0x3A
1280 #define IOPB_RES_ADDR_3B 0x3B
1281 #define IOPB_RFIFO_CNT 0x3C
1282 #define IOPB_RES_ADDR_3D 0x3D
1283 #define IOPB_RES_ADDR_3E 0x3E
1284 #define IOPB_RES_ADDR_3F 0x3F
1287 * Word I/O register address from base of 'iop_base'.
1289 #define IOPW_CHIP_ID_0 0x00 /* CID0 */
1290 #define IOPW_CTRL_REG 0x02 /* CC */
1291 #define IOPW_RAM_ADDR 0x04 /* LA */
1292 #define IOPW_RAM_DATA 0x06 /* LD */
1293 #define IOPW_RES_ADDR_08 0x08
1294 #define IOPW_RISC_CSR 0x0A /* CSR */
1295 #define IOPW_SCSI_CFG0 0x0C /* CFG0 */
1296 #define IOPW_SCSI_CFG1 0x0E /* CFG1 */
1297 #define IOPW_RES_ADDR_10 0x10
1298 #define IOPW_SEL_MASK 0x12 /* SM */
1299 #define IOPW_RES_ADDR_14 0x14
1300 #define IOPW_FLASH_ADDR 0x16 /* FA */
1301 #define IOPW_RES_ADDR_18 0x18
1302 #define IOPW_EE_CMD 0x1A /* EC */
1303 #define IOPW_EE_DATA 0x1C /* ED */
1304 #define IOPW_SFIFO_CNT 0x1E /* SFC */
1305 #define IOPW_RES_ADDR_20 0x20
1306 #define IOPW_Q_BASE 0x22 /* QB */
1307 #define IOPW_QP 0x24 /* QP */
1308 #define IOPW_IX 0x26 /* IX */
1309 #define IOPW_SP 0x28 /* SP */
1310 #define IOPW_PC 0x2A /* PC */
1311 #define IOPW_RES_ADDR_2C 0x2C
1312 #define IOPW_RES_ADDR_2E 0x2E
1313 #define IOPW_SCSI_DATA 0x30 /* SD */
1314 #define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */
1315 #define IOPW_SCSI_CTRL 0x34 /* SC */
1316 #define IOPW_HSHK_CFG 0x36 /* HCFG */
1317 #define IOPW_SXFR_STATUS 0x36 /* SXS */
1318 #define IOPW_SXFR_CNTL 0x38 /* SXL */
1319 #define IOPW_SXFR_CNTH 0x3A /* SXH */
1320 #define IOPW_RES_ADDR_3C 0x3C
1321 #define IOPW_RFIFO_DATA 0x3E /* RFD */
1324 * Doubleword I/O register address from base of 'iop_base'.
1326 #define IOPDW_RES_ADDR_0 0x00
1327 #define IOPDW_RAM_DATA 0x04
1328 #define IOPDW_RES_ADDR_8 0x08
1329 #define IOPDW_RES_ADDR_C 0x0C
1330 #define IOPDW_RES_ADDR_10 0x10
1331 #define IOPDW_COMMA 0x14
1332 #define IOPDW_COMMB 0x18
1333 #define IOPDW_RES_ADDR_1C 0x1C
1334 #define IOPDW_SDMA_ADDR0 0x20
1335 #define IOPDW_SDMA_ADDR1 0x24
1336 #define IOPDW_SDMA_COUNT 0x28
1337 #define IOPDW_SDMA_ERROR 0x2C
1338 #define IOPDW_RDMA_ADDR0 0x30
1339 #define IOPDW_RDMA_ADDR1 0x34
1340 #define IOPDW_RDMA_COUNT 0x38
1341 #define IOPDW_RDMA_ERROR 0x3C
1343 #define ADV_CHIP_ID_BYTE 0x25
1344 #define ADV_CHIP_ID_WORD 0x04C1
1346 #define ADV_INTR_ENABLE_HOST_INTR 0x01
1347 #define ADV_INTR_ENABLE_SEL_INTR 0x02
1348 #define ADV_INTR_ENABLE_DPR_INTR 0x04
1349 #define ADV_INTR_ENABLE_RTA_INTR 0x08
1350 #define ADV_INTR_ENABLE_RMA_INTR 0x10
1351 #define ADV_INTR_ENABLE_RST_INTR 0x20
1352 #define ADV_INTR_ENABLE_DPE_INTR 0x40
1353 #define ADV_INTR_ENABLE_GLOBAL_INTR 0x80
1355 #define ADV_INTR_STATUS_INTRA 0x01
1356 #define ADV_INTR_STATUS_INTRB 0x02
1357 #define ADV_INTR_STATUS_INTRC 0x04
1359 #define ADV_RISC_CSR_STOP (0x0000)
1360 #define ADV_RISC_TEST_COND (0x2000)
1361 #define ADV_RISC_CSR_RUN (0x4000)
1362 #define ADV_RISC_CSR_SINGLE_STEP (0x8000)
1364 #define ADV_CTRL_REG_HOST_INTR 0x0100
1365 #define ADV_CTRL_REG_SEL_INTR 0x0200
1366 #define ADV_CTRL_REG_DPR_INTR 0x0400
1367 #define ADV_CTRL_REG_RTA_INTR 0x0800
1368 #define ADV_CTRL_REG_RMA_INTR 0x1000
1369 #define ADV_CTRL_REG_RES_BIT14 0x2000
1370 #define ADV_CTRL_REG_DPE_INTR 0x4000
1371 #define ADV_CTRL_REG_POWER_DONE 0x8000
1372 #define ADV_CTRL_REG_ANY_INTR 0xFF00
1374 #define ADV_CTRL_REG_CMD_RESET 0x00C6
1375 #define ADV_CTRL_REG_CMD_WR_IO_REG 0x00C5
1376 #define ADV_CTRL_REG_CMD_RD_IO_REG 0x00C4
1377 #define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3
1378 #define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2
1380 #define ADV_TICKLE_NOP 0x00
1381 #define ADV_TICKLE_A 0x01
1382 #define ADV_TICKLE_B 0x02
1383 #define ADV_TICKLE_C 0x03
1385 #define AdvIsIntPending(port) \
1386 (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR)
1389 * SCSI_CFG0 Register bit definitions
1391 #define TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */
1392 #define PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */
1393 #define EVEN_PARITY 0x1000 /* Select Even Parity */
1394 #define WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */
1395 #define QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */
1396 #define PRIM_MODE 0x0100 /* Primitive SCSI mode */
1397 #define SCAM_EN 0x0080 /* Enable SCAM selection */
1398 #define SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */
1399 #define CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */
1400 #define OUR_ID_EN 0x0010 /* Enable OUR_ID bits */
1401 #define OUR_ID 0x000F /* SCSI ID */
1404 * SCSI_CFG1 Register bit definitions
1406 #define BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */
1407 #define TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */
1408 #define SLEW_RATE 0x1000 /* SCSI output buffer slew rate */
1409 #define FILTER_SEL 0x0C00 /* Filter Period Selection */
1410 #define FLTR_DISABLE 0x0000 /* Input Filtering Disabled */
1411 #define FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */
1412 #define FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */
1413 #define ACTIVE_DBL 0x0200 /* Disable Active Negation */
1414 #define DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */
1415 #define DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */
1416 #define TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */
1417 #define TERM_CTL 0x0030 /* External SCSI Termination Bits */
1418 #define TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */
1419 #define TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */
1420 #define CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */
1423 * Addendum for ASC-38C0800 Chip
1425 * The ASC-38C1600 Chip uses the same definitions except that the
1426 * bus mode override bits [12:10] have been moved to byte register
1427 * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in
1428 * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV)
1429 * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only.
1430 * Also each ASC-38C1600 function or channel uses only cable bits [5:4]
1431 * and [1:0]. Bits [14], [7:6], [3:2] are unused.
1433 #define DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */
1434 #define HVD_LVD_SE 0x1C00 /* Device Detect Bits */
1435 #define HVD 0x1000 /* HVD Device Detect */
1436 #define LVD 0x0800 /* LVD Device Detect */
1437 #define SE 0x0400 /* SE Device Detect */
1438 #define TERM_LVD 0x00C0 /* LVD Termination Bits */
1439 #define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */
1440 #define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */
1441 #define TERM_SE 0x0030 /* SE Termination Bits */
1442 #define TERM_SE_HI 0x0020 /* Enable SE Upper Termination */
1443 #define TERM_SE_LO 0x0010 /* Enable SE Lower Termination */
1444 #define C_DET_LVD 0x000C /* LVD Cable Detect Bits */
1445 #define C_DET3 0x0008 /* Cable Detect for LVD External Wide */
1446 #define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */
1447 #define C_DET_SE 0x0003 /* SE Cable Detect Bits */
1448 #define C_DET1 0x0002 /* Cable Detect for SE Internal Wide */
1449 #define C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */
1451 #define CABLE_ILLEGAL_A 0x7
1452 /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */
1454 #define CABLE_ILLEGAL_B 0xB
1455 /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */
1458 * MEM_CFG Register bit definitions
1460 #define BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */
1461 #define FAST_EE_CLK 0x20 /* Diagnostic Bit */
1462 #define RAM_SZ 0x1C /* Specify size of RAM to RISC */
1463 #define RAM_SZ_2KB 0x00 /* 2 KB */
1464 #define RAM_SZ_4KB 0x04 /* 4 KB */
1465 #define RAM_SZ_8KB 0x08 /* 8 KB */
1466 #define RAM_SZ_16KB 0x0C /* 16 KB */
1467 #define RAM_SZ_32KB 0x10 /* 32 KB */
1468 #define RAM_SZ_64KB 0x14 /* 64 KB */
1471 * DMA_CFG0 Register bit definitions
1473 * This register is only accessible to the host.
1475 #define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */
1476 #define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */
1477 #define FIFO_THRESH_16B 0x00 /* 16 bytes */
1478 #define FIFO_THRESH_32B 0x20 /* 32 bytes */
1479 #define FIFO_THRESH_48B 0x30 /* 48 bytes */
1480 #define FIFO_THRESH_64B 0x40 /* 64 bytes */
1481 #define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */
1482 #define FIFO_THRESH_96B 0x60 /* 96 bytes */
1483 #define FIFO_THRESH_112B 0x70 /* 112 bytes */
1484 #define START_CTL 0x0C /* DMA start conditions */
1485 #define START_CTL_TH 0x00 /* Wait threshold level (default) */
1486 #define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */
1487 #define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */
1488 #define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */
1489 #define READ_CMD 0x03 /* Memory Read Method */
1490 #define READ_CMD_MR 0x00 /* Memory Read */
1491 #define READ_CMD_MRL 0x02 /* Memory Read Long */
1492 #define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */
1495 * ASC-38C0800 RAM BIST Register bit definitions
1497 #define RAM_TEST_MODE 0x80
1498 #define PRE_TEST_MODE 0x40
1499 #define NORMAL_MODE 0x00
1500 #define RAM_TEST_DONE 0x10
1501 #define RAM_TEST_STATUS 0x0F
1502 #define RAM_TEST_HOST_ERROR 0x08
1503 #define RAM_TEST_INTRAM_ERROR 0x04
1504 #define RAM_TEST_RISC_ERROR 0x02
1505 #define RAM_TEST_SCSI_ERROR 0x01
1506 #define RAM_TEST_SUCCESS 0x00
1507 #define PRE_TEST_VALUE 0x05
1508 #define NORMAL_VALUE 0x00
1511 * ASC38C1600 Definitions
1513 * IOPB_PCI_INT_CFG Bit Field Definitions
1516 #define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */
1519 * Bit 1 can be set to change the interrupt for the Function to operate in
1520 * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in
1521 * Open Drain mode. Both functions of the ASC38C1600 must be set to the same
1522 * mode, otherwise the operating mode is undefined.
1524 #define TOTEMPOLE 0x02
1527 * Bit 0 can be used to change the Int Pin for the Function. The value is
1528 * 0 by default for both Functions with Function 0 using INT A and Function
1529 * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set,
1532 * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin
1533 * value specified in the PCI Configuration Space.
1538 * Adv Library Status Definitions
1542 #define ADV_SUCCESS 1
1544 #define ADV_ERROR (-1)
1547 * ADV_DVC_VAR 'warn_code' values
1549 #define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */
1550 #define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */
1551 #define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */
1552 #define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */
1554 #define ADV_MAX_TID 15 /* max. target identifier */
1555 #define ADV_MAX_LUN 7 /* max. logical unit number */
1558 * Fixed locations of microcode operating variables.
1560 #define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */
1561 #define ASC_MC_CODE_END_ADDR 0x002A /* microcode end address */
1562 #define ASC_MC_CODE_CHK_SUM 0x002C /* microcode code checksum */
1563 #define ASC_MC_VERSION_DATE 0x0038 /* microcode version */
1564 #define ASC_MC_VERSION_NUM 0x003A /* microcode number */
1565 #define ASC_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */
1566 #define ASC_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */
1567 #define ASC_MC_BIOS_SIGNATURE 0x0058 /* BIOS Signature 0x55AA */
1568 #define ASC_MC_BIOS_VERSION 0x005A /* BIOS Version (2 bytes) */
1569 #define ASC_MC_SDTR_SPEED1 0x0090 /* SDTR Speed for TID 0-3 */
1570 #define ASC_MC_SDTR_SPEED2 0x0092 /* SDTR Speed for TID 4-7 */
1571 #define ASC_MC_SDTR_SPEED3 0x0094 /* SDTR Speed for TID 8-11 */
1572 #define ASC_MC_SDTR_SPEED4 0x0096 /* SDTR Speed for TID 12-15 */
1573 #define ASC_MC_CHIP_TYPE 0x009A
1574 #define ASC_MC_INTRB_CODE 0x009B
1575 #define ASC_MC_WDTR_ABLE 0x009C
1576 #define ASC_MC_SDTR_ABLE 0x009E
1577 #define ASC_MC_TAGQNG_ABLE 0x00A0
1578 #define ASC_MC_DISC_ENABLE 0x00A2
1579 #define ASC_MC_IDLE_CMD_STATUS 0x00A4
1580 #define ASC_MC_IDLE_CMD 0x00A6
1581 #define ASC_MC_IDLE_CMD_PARAMETER 0x00A8
1582 #define ASC_MC_DEFAULT_SCSI_CFG0 0x00AC
1583 #define ASC_MC_DEFAULT_SCSI_CFG1 0x00AE
1584 #define ASC_MC_DEFAULT_MEM_CFG 0x00B0
1585 #define ASC_MC_DEFAULT_SEL_MASK 0x00B2
1586 #define ASC_MC_SDTR_DONE 0x00B6
1587 #define ASC_MC_NUMBER_OF_QUEUED_CMD 0x00C0
1588 #define ASC_MC_NUMBER_OF_MAX_CMD 0x00D0
1589 #define ASC_MC_DEVICE_HSHK_CFG_TABLE 0x0100
1590 #define ASC_MC_CONTROL_FLAG 0x0122 /* Microcode control flag. */
1591 #define ASC_MC_WDTR_DONE 0x0124
1592 #define ASC_MC_CAM_MODE_MASK 0x015E /* CAM mode TID bitmask. */
1593 #define ASC_MC_ICQ 0x0160
1594 #define ASC_MC_IRQ 0x0164
1595 #define ASC_MC_PPR_ABLE 0x017A
1598 * BIOS LRAM variable absolute offsets.
1600 #define BIOS_CODESEG 0x54
1601 #define BIOS_CODELEN 0x56
1602 #define BIOS_SIGNATURE 0x58
1603 #define BIOS_VERSION 0x5A
1606 * Microcode Control Flags
1608 * Flags set by the Adv Library in RISC variable 'control_flag' (0x122)
1609 * and handled by the microcode.
1611 #define CONTROL_FLAG_IGNORE_PERR 0x0001 /* Ignore DMA Parity Errors */
1612 #define CONTROL_FLAG_ENABLE_AIPP 0x0002 /* Enabled AIPP checking. */
1615 * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format
1617 #define HSHK_CFG_WIDE_XFR 0x8000
1618 #define HSHK_CFG_RATE 0x0F00
1619 #define HSHK_CFG_OFFSET 0x001F
1621 #define ASC_DEF_MAX_HOST_QNG 0xFD /* Max. number of host commands (253) */
1622 #define ASC_DEF_MIN_HOST_QNG 0x10 /* Min. number of host commands (16) */
1623 #define ASC_DEF_MAX_DVC_QNG 0x3F /* Max. number commands per device (63) */
1624 #define ASC_DEF_MIN_DVC_QNG 0x04 /* Min. number commands per device (4) */
1626 #define ASC_QC_DATA_CHECK 0x01 /* Require ASC_QC_DATA_OUT set or clear. */
1627 #define ASC_QC_DATA_OUT 0x02 /* Data out DMA transfer. */
1628 #define ASC_QC_START_MOTOR 0x04 /* Send auto-start motor before request. */
1629 #define ASC_QC_NO_OVERRUN 0x08 /* Don't report overrun. */
1630 #define ASC_QC_FREEZE_TIDQ 0x10 /* Freeze TID queue after request. XXX TBD */
1632 #define ASC_QSC_NO_DISC 0x01 /* Don't allow disconnect for request. */
1633 #define ASC_QSC_NO_TAGMSG 0x02 /* Don't allow tag queuing for request. */
1634 #define ASC_QSC_NO_SYNC 0x04 /* Don't use Synch. transfer on request. */
1635 #define ASC_QSC_NO_WIDE 0x08 /* Don't use Wide transfer on request. */
1636 #define ASC_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR before request. */
1638 * Note: If a Tag Message is to be sent and neither ASC_QSC_HEAD_TAG or
1639 * ASC_QSC_ORDERED_TAG is set, then a Simple Tag Message (0x20) is used.
1641 #define ASC_QSC_HEAD_TAG 0x40 /* Use Head Tag Message (0x21). */
1642 #define ASC_QSC_ORDERED_TAG 0x80 /* Use Ordered Tag Message (0x22). */
1645 * All fields here are accessed by the board microcode and need to be
1648 typedef struct adv_carr_t {
1649 __le32 carr_va; /* Carrier Virtual Address */
1650 __le32 carr_pa; /* Carrier Physical Address */
1651 __le32 areq_vpa; /* ADV_SCSI_REQ_Q Virtual or Physical Address */
1653 * next_vpa [31:4] Carrier Virtual or Physical Next Pointer
1655 * next_vpa [3:1] Reserved Bits
1656 * next_vpa [0] Done Flag set in Response Queue.
1662 * Mask used to eliminate low 4 bits of carrier 'next_vpa' field.
1664 #define ADV_NEXT_VPA_MASK 0xFFFFFFF0
1666 #define ADV_RQ_DONE 0x00000001
1667 #define ADV_RQ_GOOD 0x00000002
1668 #define ADV_CQ_STOPPER 0x00000000
1670 #define ADV_GET_CARRP(carrp) ((carrp) & ADV_NEXT_VPA_MASK)
1673 * Each carrier is 64 bytes, and we need three additional
1674 * carrier for icq, irq, and the termination carrier.
1676 #define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 3)
1678 #define ADV_CARRIER_BUFSIZE \
1679 (ADV_CARRIER_COUNT * sizeof(ADV_CARR_T))
1681 #define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */
1682 #define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */
1683 #define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */
1686 * Adapter temporary configuration structure
1688 * This structure can be discarded after initialization. Don't add
1689 * fields here needed after initialization.
1691 * Field naming convention:
1693 * *_enable indicates the field enables or disables a feature. The
1694 * value of the field is never reset.
1696 typedef struct adv_dvc_cfg {
1697 ushort disc_enable; /* enable disconnection */
1698 uchar chip_version; /* chip version */
1699 uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */
1700 ushort control_flag; /* Microcode Control Flag */
1701 ushort mcode_date; /* Microcode date */
1702 ushort mcode_version; /* Microcode version */
1703 ushort serial1; /* EEPROM serial number word 1 */
1704 ushort serial2; /* EEPROM serial number word 2 */
1705 ushort serial3; /* EEPROM serial number word 3 */
1709 struct adv_scsi_req_q;
1711 typedef struct adv_sg_block {
1715 uchar sg_cnt; /* Valid entries in block. */
1716 __le32 sg_ptr; /* Pointer to next sg block. */
1718 __le32 sg_addr; /* SG element address. */
1719 __le32 sg_count; /* SG element count. */
1720 } sg_list[NO_OF_SG_PER_BLOCK];
1724 * ADV_SCSI_REQ_Q - microcode request structure
1726 * All fields in this structure up to byte 60 are used by the microcode.
1727 * The microcode makes assumptions about the size and ordering of fields
1728 * in this structure. Do not change the structure definition here without
1729 * coordinating the change with the microcode.
1731 * All fields accessed by microcode must be maintained in little_endian
1734 typedef struct adv_scsi_req_q {
1735 uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */
1737 uchar target_id; /* Device target identifier. */
1738 uchar target_lun; /* Device target logical unit number. */
1739 __le32 data_addr; /* Data buffer physical address. */
1740 __le32 data_cnt; /* Data count. Ucode sets to residual. */
1745 uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */
1747 uchar done_status; /* Completion status. */
1748 uchar scsi_status; /* SCSI status byte. */
1749 uchar host_status; /* Ucode host status. */
1750 uchar sg_working_ix;
1751 uchar cdb[12]; /* SCSI CDB bytes 0-11. */
1752 __le32 sg_real_addr; /* SG list physical address. */
1754 uchar cdb16[4]; /* SCSI CDB bytes 12-15. */
1758 * End of microcode structure - 60 bytes. The rest of the structure
1759 * is used by the Adv Library and ignored by the microcode.
1762 ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
1766 * The following two structures are used to process Wide Board requests.
1768 * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library
1769 * and microcode with the ADV_SCSI_REQ_Q field 'srb_tag' set to the
1770 * SCSI request tag. The adv_req_t structure 'cmndp' field in turn points
1771 * to the Mid-Level SCSI request structure.
1773 * Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each
1774 * ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux
1775 * up to 255 scatter-gather elements may be used per request or
1778 * Both structures must be 32 byte aligned.
1780 typedef struct adv_sgblk {
1781 ADV_SG_BLOCK sg_block; /* Sgblock structure. */
1782 dma_addr_t sg_addr; /* Physical address */
1783 struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */
1786 typedef struct adv_req {
1787 ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */
1788 uchar align[24]; /* Request structure padding. */
1789 struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */
1790 dma_addr_t req_addr;
1791 adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */
1792 } adv_req_t __aligned(32);
1795 * Adapter operation variable structure.
1797 * One structure is required per host adapter.
1799 * Field naming convention:
1801 * *_able indicates both whether a feature should be enabled or disabled
1802 * and whether a device is capable of the feature. At initialization
1803 * this field may be set, but later if a device is found to be incapable
1804 * of the feature, the field is cleared.
1806 typedef struct adv_dvc_var {
1807 AdvPortAddr iop_base; /* I/O port address */
1808 ushort err_code; /* fatal error code */
1809 ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */
1810 ushort wdtr_able; /* try WDTR for a device */
1811 ushort sdtr_able; /* try SDTR for a device */
1812 ushort ultra_able; /* try SDTR Ultra speed for a device */
1813 ushort sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */
1814 ushort sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */
1815 ushort sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */
1816 ushort sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */
1817 ushort tagqng_able; /* try tagged queuing with a device */
1818 ushort ppr_able; /* PPR message capable per TID bitmask. */
1819 uchar max_dvc_qng; /* maximum number of tagged commands per device */
1820 ushort start_motor; /* start motor command allowed */
1821 uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */
1822 uchar chip_no; /* should be assigned by caller */
1823 uchar max_host_qng; /* maximum number of Q'ed command allowed */
1824 ushort no_scam; /* scam_tolerant of EEPROM */
1825 struct asc_board *drv_ptr; /* driver pointer to private structure */
1826 uchar chip_scsi_id; /* chip SCSI target ID */
1828 uchar bist_err_code;
1829 ADV_CARR_T *carrier;
1830 ADV_CARR_T *carr_freelist; /* Carrier free list. */
1831 dma_addr_t carrier_addr;
1832 ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */
1833 ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */
1834 ushort carr_pending_cnt; /* Count of pending carriers. */
1836 * Note: The following fields will not be used after initialization. The
1837 * driver may discard the buffer after initialization is done.
1839 ADV_DVC_CFG *cfg; /* temporary configuration structure */
1843 * Microcode idle loop commands
1845 #define IDLE_CMD_COMPLETED 0
1846 #define IDLE_CMD_STOP_CHIP 0x0001
1847 #define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002
1848 #define IDLE_CMD_SEND_INT 0x0004
1849 #define IDLE_CMD_ABORT 0x0008
1850 #define IDLE_CMD_DEVICE_RESET 0x0010
1851 #define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */
1852 #define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */
1853 #define IDLE_CMD_SCSIREQ 0x0080
1855 #define IDLE_CMD_STATUS_SUCCESS 0x0001
1856 #define IDLE_CMD_STATUS_FAILURE 0x0002
1859 * AdvSendIdleCmd() flag definitions.
1861 #define ADV_NOWAIT 0x01
1864 * Wait loop time out values.
1866 #define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */
1867 #define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */
1868 #define SCSI_MAX_RETRY 10 /* retry count */
1870 #define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */
1871 #define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */
1872 #define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */
1873 #define ADV_RDMA_IN_CARR_AND_Q_INVALID 0x04 /* RDMAed-in data invalid. */
1875 #define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */
1877 /* Read byte from a register. */
1878 #define AdvReadByteRegister(iop_base, reg_off) \
1879 (ADV_MEM_READB((iop_base) + (reg_off)))
1881 /* Write byte to a register. */
1882 #define AdvWriteByteRegister(iop_base, reg_off, byte) \
1883 (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte)))
1885 /* Read word (2 bytes) from a register. */
1886 #define AdvReadWordRegister(iop_base, reg_off) \
1887 (ADV_MEM_READW((iop_base) + (reg_off)))
1889 /* Write word (2 bytes) to a register. */
1890 #define AdvWriteWordRegister(iop_base, reg_off, word) \
1891 (ADV_MEM_WRITEW((iop_base) + (reg_off), (word)))
1893 /* Write dword (4 bytes) to a register. */
1894 #define AdvWriteDWordRegister(iop_base, reg_off, dword) \
1895 (ADV_MEM_WRITEDW((iop_base) + (reg_off), (dword)))
1897 /* Read byte from LRAM. */
1898 #define AdvReadByteLram(iop_base, addr, byte) \
1900 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \
1901 (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA); \
1904 /* Write byte to LRAM. */
1905 #define AdvWriteByteLram(iop_base, addr, byte) \
1906 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
1907 ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte)))
1909 /* Read word (2 bytes) from LRAM. */
1910 #define AdvReadWordLram(iop_base, addr, word) \
1912 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \
1913 (word) = (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)); \
1916 /* Write word (2 bytes) to LRAM. */
1917 #define AdvWriteWordLram(iop_base, addr, word) \
1918 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
1919 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word)))
1921 /* Write little-endian double word (4 bytes) to LRAM */
1922 /* Because of unspecified C language ordering don't use auto-increment. */
1923 #define AdvWriteDWordLramNoSwap(iop_base, addr, dword) \
1924 ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
1925 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \
1926 cpu_to_le16((ushort) ((dword) & 0xFFFF)))), \
1927 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2), \
1928 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \
1929 cpu_to_le16((ushort) ((dword >> 16) & 0xFFFF)))))
1931 /* Read word (2 bytes) from LRAM assuming that the address is already set. */
1932 #define AdvReadWordAutoIncLram(iop_base) \
1933 (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA))
1935 /* Write word (2 bytes) to LRAM assuming that the address is already set. */
1936 #define AdvWriteWordAutoIncLram(iop_base, word) \
1937 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word)))
1940 * Define macro to check for Condor signature.
1942 * Evaluate to ADV_TRUE if a Condor chip is found the specified port
1943 * address 'iop_base'. Otherwise evalue to ADV_FALSE.
1945 #define AdvFindSignature(iop_base) \
1946 (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1) == \
1947 ADV_CHIP_ID_BYTE) && \
1948 (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0) == \
1949 ADV_CHIP_ID_WORD)) ? ADV_TRUE : ADV_FALSE)
1952 * Define macro to Return the version number of the chip at 'iop_base'.
1954 * The second parameter 'bus_type' is currently unused.
1956 #define AdvGetChipVersion(iop_base, bus_type) \
1957 AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV)
1960 * Abort an SRB in the chip's RISC Memory. The 'srb_tag' argument must
1961 * match the ADV_SCSI_REQ_Q 'srb_tag' field.
1963 * If the request has not yet been sent to the device it will simply be
1964 * aborted from RISC memory. If the request is disconnected it will be
1965 * aborted on reselection by sending an Abort Message to the target ID.
1968 * ADV_TRUE(1) - Queue was successfully aborted.
1969 * ADV_FALSE(0) - Queue was not found on the active queue list.
1971 #define AdvAbortQueue(asc_dvc, srb_tag) \
1972 AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \
1973 (ADV_DCNT) (srb_tag))
1976 * Send a Bus Device Reset Message to the specified target ID.
1978 * All outstanding commands will be purged if sending the
1979 * Bus Device Reset Message is successful.
1982 * ADV_TRUE(1) - All requests on the target are purged.
1983 * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests
1986 #define AdvResetDevice(asc_dvc, target_id) \
1987 AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \
1988 (ADV_DCNT) (target_id))
1991 * SCSI Wide Type definition.
1993 #define ADV_SCSI_BIT_ID_TYPE ushort
1996 * AdvInitScsiTarget() 'cntl_flag' options.
1998 #define ADV_SCAN_LUN 0x01
1999 #define ADV_CAPINFO_NOLUN 0x02
2002 * Convert target id to target id bit mask.
2004 #define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID))
2007 * ADV_SCSI_REQ_Q 'done_status' and 'host_status' return values.
2010 #define QD_NO_STATUS 0x00 /* Request not completed yet. */
2011 #define QD_NO_ERROR 0x01
2012 #define QD_ABORTED_BY_HOST 0x02
2013 #define QD_WITH_ERROR 0x04
2015 #define QHSTA_NO_ERROR 0x00
2016 #define QHSTA_M_SEL_TIMEOUT 0x11
2017 #define QHSTA_M_DATA_OVER_RUN 0x12
2018 #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13
2019 #define QHSTA_M_QUEUE_ABORTED 0x15
2020 #define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */
2021 #define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */
2022 #define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */
2023 #define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */
2024 #define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */
2025 #define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */
2026 #define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */
2027 /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */
2028 #define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */
2029 #define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */
2030 #define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */
2031 #define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */
2032 #define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */
2033 #define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */
2034 #define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */
2035 #define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */
2036 #define QHSTA_M_WTM_TIMEOUT 0x41
2037 #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42
2038 #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43
2039 #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44
2040 #define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */
2041 #define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */
2042 #define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */
2044 /* Return the address that is aligned at the next doubleword >= to 'addr'. */
2045 #define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F)
2048 * Total contiguous memory needed for driver SG blocks.
2050 * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum
2051 * number of scatter-gather elements the driver supports in a
2055 #define ADV_SG_LIST_MAX_BYTE_SIZE \
2056 (sizeof(ADV_SG_BLOCK) * \
2057 ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK))
2059 /* struct asc_board flags */
2060 #define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */
2062 #define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0)
2064 #define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */
2066 #define ASC_INFO_SIZE 128 /* advansys_info() line size */
2068 /* Asc Library return codes */
2071 #define ASC_NOERROR 1
2073 #define ASC_ERROR (-1)
2075 #define ASC_STATS(shost, counter) ASC_STATS_ADD(shost, counter, 1)
2076 #ifndef ADVANSYS_STATS
2077 #define ASC_STATS_ADD(shost, counter, count)
2078 #else /* ADVANSYS_STATS */
2079 #define ASC_STATS_ADD(shost, counter, count) \
2080 (((struct asc_board *) shost_priv(shost))->asc_stats.counter += (count))
2081 #endif /* ADVANSYS_STATS */
2083 /* If the result wraps when calculating tenths, return 0. */
2084 #define ASC_TENTHS(num, den) \
2085 (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \
2086 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den)))))
2089 * Display a message to the console.
2091 #define ASC_PRINT(s) \
2093 printk("advansys: "); \
2097 #define ASC_PRINT1(s, a1) \
2099 printk("advansys: "); \
2100 printk((s), (a1)); \
2103 #define ASC_PRINT2(s, a1, a2) \
2105 printk("advansys: "); \
2106 printk((s), (a1), (a2)); \
2109 #define ASC_PRINT3(s, a1, a2, a3) \
2111 printk("advansys: "); \
2112 printk((s), (a1), (a2), (a3)); \
2115 #define ASC_PRINT4(s, a1, a2, a3, a4) \
2117 printk("advansys: "); \
2118 printk((s), (a1), (a2), (a3), (a4)); \
2121 #ifndef ADVANSYS_DEBUG
2123 #define ASC_DBG(lvl, s...)
2124 #define ASC_DBG_PRT_SCSI_HOST(lvl, s)
2125 #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp)
2126 #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp)
2127 #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone)
2128 #define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp)
2129 #define ASC_DBG_PRT_HEX(lvl, name, start, length)
2130 #define ASC_DBG_PRT_CDB(lvl, cdb, len)
2131 #define ASC_DBG_PRT_SENSE(lvl, sense, len)
2132 #define ASC_DBG_PRT_INQUIRY(lvl, inq, len)
2134 #else /* ADVANSYS_DEBUG */
2137 * Debugging Message Levels:
2139 * 1: High-Level Tracing
2140 * 2-N: Verbose Tracing
2143 #define ASC_DBG(lvl, format, arg...) { \
2144 if (asc_dbglvl >= (lvl)) \
2145 printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \
2146 __func__ , ## arg); \
2149 #define ASC_DBG_PRT_SCSI_HOST(lvl, s) \
2151 if (asc_dbglvl >= (lvl)) { \
2152 asc_prt_scsi_host(s); \
2156 #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \
2158 if (asc_dbglvl >= (lvl)) { \
2159 asc_prt_asc_scsi_q(scsiqp); \
2163 #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \
2165 if (asc_dbglvl >= (lvl)) { \
2166 asc_prt_asc_qdone_info(qdone); \
2170 #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \
2172 if (asc_dbglvl >= (lvl)) { \
2173 asc_prt_adv_scsi_req_q(scsiqp); \
2177 #define ASC_DBG_PRT_HEX(lvl, name, start, length) \
2179 if (asc_dbglvl >= (lvl)) { \
2180 asc_prt_hex((name), (start), (length)); \
2184 #define ASC_DBG_PRT_CDB(lvl, cdb, len) \
2185 ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len));
2187 #define ASC_DBG_PRT_SENSE(lvl, sense, len) \
2188 ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len));
2190 #define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \
2191 ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len));
2192 #endif /* ADVANSYS_DEBUG */
2194 #ifdef ADVANSYS_STATS
2196 /* Per board statistics structure */
2198 /* Driver Entrypoint Statistics */
2199 unsigned int queuecommand; /* # calls to advansys_queuecommand() */
2200 unsigned int reset; /* # calls to advansys_eh_bus_reset() */
2201 unsigned int biosparam; /* # calls to advansys_biosparam() */
2202 unsigned int interrupt; /* # advansys_interrupt() calls */
2203 unsigned int callback; /* # calls to asc/adv_isr_callback() */
2204 unsigned int done; /* # calls to request's scsi_done function */
2205 unsigned int build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
2206 unsigned int adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
2207 unsigned int adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
2208 /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */
2209 unsigned int exe_noerror; /* # ASC_NOERROR returns. */
2210 unsigned int exe_busy; /* # ASC_BUSY returns. */
2211 unsigned int exe_error; /* # ASC_ERROR returns. */
2212 unsigned int exe_unknown; /* # unknown returns. */
2213 /* Data Transfer Statistics */
2214 unsigned int xfer_cnt; /* # I/O requests received */
2215 unsigned int xfer_elem; /* # scatter-gather elements */
2216 unsigned int xfer_sect; /* # 512-byte blocks */
2218 #endif /* ADVANSYS_STATS */
2221 * Structure allocated for each board.
2223 * This structure is allocated by scsi_host_alloc() at the end
2224 * of the 'Scsi_Host' structure starting at the 'hostdata'
2225 * field. It is guaranteed to be allocated from DMA-able memory.
2229 struct Scsi_Host *shost;
2230 uint flags; /* Board flags */
2233 ASC_DVC_VAR asc_dvc_var; /* Narrow board */
2234 ADV_DVC_VAR adv_dvc_var; /* Wide board */
2237 ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */
2238 ADV_DVC_CFG adv_dvc_cfg; /* Wide board */
2240 ushort asc_n_io_port; /* Number I/O ports. */
2241 ADV_SCSI_BIT_ID_TYPE init_tidmask; /* Target init./valid mask */
2242 ushort reqcnt[ADV_MAX_TID + 1]; /* Starvation request count */
2243 ADV_SCSI_BIT_ID_TYPE queue_full; /* Queue full mask */
2244 ushort queue_full_cnt[ADV_MAX_TID + 1]; /* Queue full count */
2246 ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */
2247 ADVEEP_3550_CONFIG adv_3550_eep; /* 3550 EEPROM config. */
2248 ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */
2249 ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */
2251 /* /proc/scsi/advansys/[0...] */
2252 #ifdef ADVANSYS_STATS
2253 struct asc_stats asc_stats; /* Board statistics */
2254 #endif /* ADVANSYS_STATS */
2256 * The following fields are used only for Narrow Boards.
2258 uchar sdtr_data[ASC_MAX_TID + 1]; /* SDTR information */
2260 * The following fields are used only for Wide Boards.
2262 void __iomem *ioremap_addr; /* I/O Memory remap address. */
2263 ushort ioport; /* I/O Port address. */
2264 adv_req_t *adv_reqp; /* Request structures. */
2265 dma_addr_t adv_reqp_addr;
2266 size_t adv_reqp_size;
2267 struct dma_pool *adv_sgblk_pool; /* Scatter-gather structures. */
2268 ushort bios_signature; /* BIOS Signature. */
2269 ushort bios_version; /* BIOS Version. */
2270 ushort bios_codeseg; /* BIOS Code Segment. */
2271 ushort bios_codelen; /* BIOS Code Segment Length. */
2274 #define asc_dvc_to_board(asc_dvc) container_of(asc_dvc, struct asc_board, \
2275 dvc_var.asc_dvc_var)
2276 #define adv_dvc_to_board(adv_dvc) container_of(adv_dvc, struct asc_board, \
2277 dvc_var.adv_dvc_var)
2278 #define adv_dvc_to_pdev(adv_dvc) to_pci_dev(adv_dvc_to_board(adv_dvc)->dev)
2280 #ifdef ADVANSYS_DEBUG
2281 static int asc_dbglvl = 3;
2284 * asc_prt_asc_dvc_var()
2286 static void asc_prt_asc_dvc_var(ASC_DVC_VAR *h)
2288 printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h);
2290 printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl "
2291 "%d,\n", h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl);
2293 printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type,
2294 (unsigned)h->init_sdtr);
2296 printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, "
2297 "chip_no 0x%x,\n", (unsigned)h->sdtr_done,
2298 (unsigned)h->use_tagged_qng, (unsigned)h->unit_not_ready,
2299 (unsigned)h->chip_no);
2301 printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait "
2302 "%u,\n", (unsigned)h->queue_full_or_busy,
2303 (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait);
2305 printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, "
2306 "in_critical_cnt %u,\n", (unsigned)h->is_in_int,
2307 (unsigned)h->max_total_qng, (unsigned)h->cur_total_qng,
2308 (unsigned)h->in_critical_cnt);
2310 printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, "
2311 "pci_fix_asyn_xfer 0x%x,\n", (unsigned)h->last_q_shortage,
2312 (unsigned)h->init_state, (unsigned)h->no_scam,
2313 (unsigned)h->pci_fix_asyn_xfer);
2315 printk(" cfg 0x%lx\n", (ulong)h->cfg);
2319 * asc_prt_asc_dvc_cfg()
2321 static void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h)
2323 printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h);
2325 printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n",
2326 h->can_tagged_qng, h->cmd_qng_enabled);
2327 printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n",
2328 h->disc_enable, h->sdtr_enable);
2330 printk(" chip_scsi_id %d, chip_version %d,\n",
2331 h->chip_scsi_id, h->chip_version);
2333 printk(" mcode_date 0x%x, mcode_version %d\n",
2334 h->mcode_date, h->mcode_version);
2338 * asc_prt_adv_dvc_var()
2340 * Display an ADV_DVC_VAR structure.
2342 static void asc_prt_adv_dvc_var(ADV_DVC_VAR *h)
2344 printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h);
2346 printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n",
2347 (ulong)h->iop_base, h->err_code, (unsigned)h->ultra_able);
2349 printk(" sdtr_able 0x%x, wdtr_able 0x%x\n",
2350 (unsigned)h->sdtr_able, (unsigned)h->wdtr_able);
2352 printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n",
2353 (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait);
2355 printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%p\n",
2356 (unsigned)h->max_host_qng, (unsigned)h->max_dvc_qng,
2359 printk(" icq_sp 0x%p, irq_sp 0x%p\n", h->icq_sp, h->irq_sp);
2361 printk(" no_scam 0x%x, tagqng_able 0x%x\n",
2362 (unsigned)h->no_scam, (unsigned)h->tagqng_able);
2364 printk(" chip_scsi_id 0x%x, cfg 0x%lx\n",
2365 (unsigned)h->chip_scsi_id, (ulong)h->cfg);
2369 * asc_prt_adv_dvc_cfg()
2371 * Display an ADV_DVC_CFG structure.
2373 static void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h)
2375 printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h);
2377 printk(" disc_enable 0x%x, termination 0x%x\n",
2378 h->disc_enable, h->termination);
2380 printk(" chip_version 0x%x, mcode_date 0x%x\n",
2381 h->chip_version, h->mcode_date);
2383 printk(" mcode_version 0x%x, control_flag 0x%x\n",
2384 h->mcode_version, h->control_flag);
2388 * asc_prt_scsi_host()
2390 static void asc_prt_scsi_host(struct Scsi_Host *s)
2392 struct asc_board *boardp = shost_priv(s);
2394 printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev));
2395 printk(" host_busy %d, host_no %d,\n",
2396 scsi_host_busy(s), s->host_no);
2398 printk(" base 0x%lx, io_port 0x%lx, irq %d,\n",
2399 (ulong)s->base, (ulong)s->io_port, boardp->irq);
2401 printk(" dma_channel %d, this_id %d, can_queue %d,\n",
2402 s->dma_channel, s->this_id, s->can_queue);
2404 printk(" cmd_per_lun %d, sg_tablesize %d\n",
2405 s->cmd_per_lun, s->sg_tablesize);
2407 if (ASC_NARROW_BOARD(boardp)) {
2408 asc_prt_asc_dvc_var(&boardp->dvc_var.asc_dvc_var);
2409 asc_prt_asc_dvc_cfg(&boardp->dvc_cfg.asc_dvc_cfg);
2411 asc_prt_adv_dvc_var(&boardp->dvc_var.adv_dvc_var);
2412 asc_prt_adv_dvc_cfg(&boardp->dvc_cfg.adv_dvc_cfg);
2419 * Print hexadecimal output in 4 byte groupings 32 bytes
2420 * or 8 double-words per line.
2422 static void asc_prt_hex(char *f, uchar *s, int l)
2429 printk("%s: (%d bytes)\n", f, l);
2431 for (i = 0; i < l; i += 32) {
2433 /* Display a maximum of 8 double-words per line. */
2434 if ((k = (l - i) / 4) >= 8) {
2441 for (j = 0; j < k; j++) {
2442 printk(" %2.2X%2.2X%2.2X%2.2X",
2443 (unsigned)s[i + (j * 4)],
2444 (unsigned)s[i + (j * 4) + 1],
2445 (unsigned)s[i + (j * 4) + 2],
2446 (unsigned)s[i + (j * 4) + 3]);
2454 printk(" %2.2X", (unsigned)s[i + (j * 4)]);
2457 printk(" %2.2X%2.2X",
2458 (unsigned)s[i + (j * 4)],
2459 (unsigned)s[i + (j * 4) + 1]);
2462 printk(" %2.2X%2.2X%2.2X",
2463 (unsigned)s[i + (j * 4) + 1],
2464 (unsigned)s[i + (j * 4) + 2],
2465 (unsigned)s[i + (j * 4) + 3]);
2474 * asc_prt_asc_scsi_q()
2476 static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q)
2481 printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q);
2484 (" target_ix 0x%x, target_lun %u, srb_tag 0x%x, tag_code 0x%x,\n",
2485 q->q2.target_ix, q->q1.target_lun, q->q2.srb_tag,
2489 (" data_addr 0x%lx, data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
2490 (ulong)le32_to_cpu(q->q1.data_addr),
2491 (ulong)le32_to_cpu(q->q1.data_cnt),
2492 (ulong)le32_to_cpu(q->q1.sense_addr), q->q1.sense_len);
2494 printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n",
2495 (ulong)q->cdbptr, q->q2.cdb_len,
2496 (ulong)q->sg_head, q->q1.sg_queue_cnt);
2500 printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp);
2501 printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt,
2503 for (i = 0; i < sgp->entry_cnt; i++) {
2504 printk(" [%u]: addr 0x%lx, bytes %lu\n",
2505 i, (ulong)le32_to_cpu(sgp->sg_list[i].addr),
2506 (ulong)le32_to_cpu(sgp->sg_list[i].bytes));
2513 * asc_prt_asc_qdone_info()
2515 static void asc_prt_asc_qdone_info(ASC_QDONE_INFO *q)
2517 printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q);
2518 printk(" srb_tag 0x%x, target_ix %u, cdb_len %u, tag_code %u,\n",
2519 q->d2.srb_tag, q->d2.target_ix, q->d2.cdb_len,
2522 (" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n",
2523 q->d3.done_stat, q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg);
2527 * asc_prt_adv_sgblock()
2529 * Display an ADV_SG_BLOCK structure.
2531 static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b)
2535 printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
2536 (ulong)b, sgblockno);
2537 printk(" sg_cnt %u, sg_ptr 0x%x\n",
2538 b->sg_cnt, (u32)le32_to_cpu(b->sg_ptr));
2539 BUG_ON(b->sg_cnt > NO_OF_SG_PER_BLOCK);
2541 BUG_ON(b->sg_cnt != NO_OF_SG_PER_BLOCK);
2542 for (i = 0; i < b->sg_cnt; i++) {
2543 printk(" [%u]: sg_addr 0x%x, sg_count 0x%x\n",
2544 i, (u32)le32_to_cpu(b->sg_list[i].sg_addr),
2545 (u32)le32_to_cpu(b->sg_list[i].sg_count));
2550 * asc_prt_adv_scsi_req_q()
2552 * Display an ADV_SCSI_REQ_Q structure.
2554 static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
2557 struct adv_sg_block *sg_ptr;
2558 adv_sgblk_t *sgblkp;
2560 printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
2562 printk(" target_id %u, target_lun %u, srb_tag 0x%x\n",
2563 q->target_id, q->target_lun, q->srb_tag);
2565 printk(" cntl 0x%x, data_addr 0x%lx\n",
2566 q->cntl, (ulong)le32_to_cpu(q->data_addr));
2568 printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
2569 (ulong)le32_to_cpu(q->data_cnt),
2570 (ulong)le32_to_cpu(q->sense_addr), q->sense_len);
2573 (" cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n",
2574 q->cdb_len, q->done_status, q->host_status, q->scsi_status);
2576 printk(" sg_working_ix 0x%x, target_cmd %u\n",
2577 q->sg_working_ix, q->target_cmd);
2579 printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n",
2580 (ulong)le32_to_cpu(q->scsiq_rptr),
2581 (ulong)le32_to_cpu(q->sg_real_addr), (ulong)q->sg_list_ptr);
2583 /* Display the request's ADV_SG_BLOCK structures. */
2584 if (q->sg_list_ptr != NULL) {
2585 sgblkp = container_of(q->sg_list_ptr, adv_sgblk_t, sg_block);
2588 sg_ptr = &sgblkp->sg_block;
2589 asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr);
2590 if (sg_ptr->sg_ptr == 0) {
2593 sgblkp = sgblkp->next_sgblkp;
2598 #endif /* ADVANSYS_DEBUG */
2603 * Return suitable for printing on the console with the argument
2604 * adapter's configuration information.
2606 * Note: The information line should not exceed ASC_INFO_SIZE bytes,
2607 * otherwise the static 'info' array will be overrun.
2609 static const char *advansys_info(struct Scsi_Host *shost)
2611 static char info[ASC_INFO_SIZE];
2612 struct asc_board *boardp = shost_priv(shost);
2613 ASC_DVC_VAR *asc_dvc_varp;
2614 ADV_DVC_VAR *adv_dvc_varp;
2616 char *widename = NULL;
2618 if (ASC_NARROW_BOARD(boardp)) {
2619 asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
2620 ASC_DBG(1, "begin\n");
2622 if (asc_dvc_varp->bus_type & ASC_IS_VL) {
2624 } else if (asc_dvc_varp->bus_type & ASC_IS_EISA) {
2626 } else if (asc_dvc_varp->bus_type & ASC_IS_PCI) {
2627 if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA)
2628 == ASC_IS_PCI_ULTRA) {
2629 busname = "PCI Ultra";
2635 shost_printk(KERN_ERR, shost, "unknown bus "
2636 "type %d\n", asc_dvc_varp->bus_type);
2639 "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X",
2640 ASC_VERSION, busname, (ulong)shost->io_port,
2641 (ulong)shost->io_port + ASC_IOADR_GAP - 1,
2645 * Wide Adapter Information
2647 * Memory-mapped I/O is used instead of I/O space to access
2648 * the adapter, but display the I/O Port range. The Memory
2649 * I/O address is displayed through the driver /proc file.
2651 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
2652 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
2653 widename = "Ultra-Wide";
2654 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
2655 widename = "Ultra2-Wide";
2657 widename = "Ultra3-Wide";
2660 "AdvanSys SCSI %s: PCI %s: PCIMEM 0x%lX-0x%lX, IRQ 0x%X",
2661 ASC_VERSION, widename, (ulong)adv_dvc_varp->iop_base,
2662 (ulong)adv_dvc_varp->iop_base + boardp->asc_n_io_port - 1, boardp->irq);
2664 BUG_ON(strlen(info) >= ASC_INFO_SIZE);
2665 ASC_DBG(1, "end\n");
2669 #ifdef CONFIG_PROC_FS
2672 * asc_prt_board_devices()
2674 * Print driver information for devices attached to the board.
2676 static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost)
2678 struct asc_board *boardp = shost_priv(shost);
2683 "\nDevice Information for AdvanSys SCSI Host %d:\n",
2686 if (ASC_NARROW_BOARD(boardp)) {
2687 chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
2689 chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
2692 seq_puts(m, "Target IDs Detected:");
2693 for (i = 0; i <= ADV_MAX_TID; i++) {
2694 if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i))
2695 seq_printf(m, " %X,", i);
2697 seq_printf(m, " (%X=Host Adapter)\n", chip_scsi_id);
2701 * Display Wide Board BIOS Information.
2703 static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
2705 struct asc_board *boardp = shost_priv(shost);
2706 ushort major, minor, letter;
2708 seq_puts(m, "\nROM BIOS Version: ");
2711 * If the BIOS saved a valid signature, then fill in
2712 * the BIOS code segment base address.
2714 if (boardp->bios_signature != 0x55AA) {
2715 seq_puts(m, "Disabled or Pre-3.1\n"
2716 "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n"
2717 "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
2719 major = (boardp->bios_version >> 12) & 0xF;
2720 minor = (boardp->bios_version >> 8) & 0xF;
2721 letter = (boardp->bios_version & 0xFF);
2723 seq_printf(m, "%d.%d%c\n",
2725 letter >= 26 ? '?' : letter + 'A');
2727 * Current available ROM BIOS release is 3.1I for UW
2728 * and 3.2I for U2W. This code doesn't differentiate
2729 * UW and U2W boards.
2731 if (major < 3 || (major <= 3 && minor < 1) ||
2732 (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) {
2733 seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n"
2734 "ftp://ftp.connectcom.net/pub\n");
2740 * Add serial number to information bar if signature AAh
2741 * is found in at bit 15-9 (7 bits) of word 1.
2743 * Serial Number consists fo 12 alpha-numeric digits.
2745 * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits)
2746 * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits)
2747 * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits)
2748 * 5 - Product revision (A-J) Word0: " "
2750 * Signature Word1: 15-9 (7 bits)
2751 * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit)
2752 * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits)
2754 * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits)
2756 * Note 1: Only production cards will have a serial number.
2758 * Note 2: Signature is most significant 7 bits (0xFE).
2760 * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE.
2762 static int asc_get_eeprom_string(ushort *serialnum, uchar *cp)
2766 if ((serialnum[1] & 0xFE00) != ((ushort)0xAA << 8)) {
2770 * First word - 6 digits.
2774 /* Product type - 1st digit. */
2775 if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') {
2776 /* Product type is P=Prototype */
2781 /* Manufacturing location - 2nd digit. */
2782 *cp++ = 'A' + ((w & 0x1C00) >> 10);
2784 /* Product ID - 3rd, 4th digits. */
2786 *cp++ = '0' + (num / 100);
2788 *cp++ = '0' + (num / 10);
2790 /* Product revision - 5th digit. */
2791 *cp++ = 'A' + (num % 10);
2801 * If bit 15 of third word is set, then the
2802 * last digit of the year is greater than 7.
2804 if (serialnum[2] & 0x8000) {
2805 *cp++ = '8' + ((w & 0x1C0) >> 6);
2807 *cp++ = '0' + ((w & 0x1C0) >> 6);
2810 /* Week of year - 7th, 8th digits. */
2812 *cp++ = '0' + num / 10;
2819 w = serialnum[2] & 0x7FFF;
2821 /* Serial number - 9th digit. */
2822 *cp++ = 'A' + (w / 1000);
2824 /* 10th, 11th, 12th digits. */
2826 *cp++ = '0' + num / 100;
2828 *cp++ = '0' + num / 10;
2832 *cp = '\0'; /* Null Terminate the string. */
2838 * asc_prt_asc_board_eeprom()
2840 * Print board EEPROM configuration.
2842 static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost)
2844 struct asc_board *boardp = shost_priv(shost);
2847 uchar serialstr[13];
2849 ep = &boardp->eep_config.asc_eep;
2852 "\nEEPROM Settings for AdvanSys SCSI Host %d:\n",
2855 if (asc_get_eeprom_string((ushort *)&ep->adapter_info[0], serialstr)
2857 seq_printf(m, " Serial Number: %s\n", serialstr);
2858 else if (ep->adapter_info[5] == 0xBB)
2860 " Default Settings Used for EEPROM-less Adapter.\n");
2862 seq_puts(m, " Serial Number Signature Not Present.\n");
2865 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
2866 ASC_EEP_GET_CHIP_ID(ep), ep->max_total_qng,
2870 " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam);
2872 seq_puts(m, " Target ID: ");
2873 for (i = 0; i <= ASC_MAX_TID; i++)
2874 seq_printf(m, " %d", i);
2876 seq_puts(m, "\n Disconnects: ");
2877 for (i = 0; i <= ASC_MAX_TID; i++)
2878 seq_printf(m, " %c",
2879 (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
2881 seq_puts(m, "\n Command Queuing: ");
2882 for (i = 0; i <= ASC_MAX_TID; i++)
2883 seq_printf(m, " %c",
2884 (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
2886 seq_puts(m, "\n Start Motor: ");
2887 for (i = 0; i <= ASC_MAX_TID; i++)
2888 seq_printf(m, " %c",
2889 (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
2891 seq_puts(m, "\n Synchronous Transfer:");
2892 for (i = 0; i <= ASC_MAX_TID; i++)
2893 seq_printf(m, " %c",
2894 (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
2899 * asc_prt_adv_board_eeprom()
2901 * Print board EEPROM configuration.
2903 static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost)
2905 struct asc_board *boardp = shost_priv(shost);
2906 ADV_DVC_VAR *adv_dvc_varp;
2909 uchar serialstr[13];
2910 ADVEEP_3550_CONFIG *ep_3550 = NULL;
2911 ADVEEP_38C0800_CONFIG *ep_38C0800 = NULL;
2912 ADVEEP_38C1600_CONFIG *ep_38C1600 = NULL;
2915 ushort sdtr_speed = 0;
2917 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
2918 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
2919 ep_3550 = &boardp->eep_config.adv_3550_eep;
2920 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
2921 ep_38C0800 = &boardp->eep_config.adv_38C0800_eep;
2923 ep_38C1600 = &boardp->eep_config.adv_38C1600_eep;
2927 "\nEEPROM Settings for AdvanSys SCSI Host %d:\n",
2930 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
2931 wordp = &ep_3550->serial_number_word1;
2932 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
2933 wordp = &ep_38C0800->serial_number_word1;
2935 wordp = &ep_38C1600->serial_number_word1;
2938 if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE)
2939 seq_printf(m, " Serial Number: %s\n", serialstr);
2941 seq_puts(m, " Serial Number Signature Not Present.\n");
2943 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
2945 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
2946 ep_3550->adapter_scsi_id,
2947 ep_3550->max_host_qng, ep_3550->max_dvc_qng);
2948 else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
2950 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
2951 ep_38C0800->adapter_scsi_id,
2952 ep_38C0800->max_host_qng,
2953 ep_38C0800->max_dvc_qng);
2956 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
2957 ep_38C1600->adapter_scsi_id,
2958 ep_38C1600->max_host_qng,
2959 ep_38C1600->max_dvc_qng);
2960 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
2961 word = ep_3550->termination;
2962 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
2963 word = ep_38C0800->termination_lvd;
2965 word = ep_38C1600->termination_lvd;
2969 termstr = "Low Off/High Off";
2972 termstr = "Low Off/High On";
2975 termstr = "Low On/High On";
2979 termstr = "Automatic";
2983 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
2985 " termination: %u (%s), bios_ctrl: 0x%x\n",
2986 ep_3550->termination, termstr,
2987 ep_3550->bios_ctrl);
2988 else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
2990 " termination: %u (%s), bios_ctrl: 0x%x\n",
2991 ep_38C0800->termination_lvd, termstr,
2992 ep_38C0800->bios_ctrl);
2995 " termination: %u (%s), bios_ctrl: 0x%x\n",
2996 ep_38C1600->termination_lvd, termstr,
2997 ep_38C1600->bios_ctrl);
2999 seq_puts(m, " Target ID: ");
3000 for (i = 0; i <= ADV_MAX_TID; i++)
3001 seq_printf(m, " %X", i);
3004 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3005 word = ep_3550->disc_enable;
3006 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
3007 word = ep_38C0800->disc_enable;
3009 word = ep_38C1600->disc_enable;
3011 seq_puts(m, " Disconnects: ");
3012 for (i = 0; i <= ADV_MAX_TID; i++)
3013 seq_printf(m, " %c",
3014 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3017 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3018 word = ep_3550->tagqng_able;
3019 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
3020 word = ep_38C0800->tagqng_able;
3022 word = ep_38C1600->tagqng_able;
3024 seq_puts(m, " Command Queuing: ");
3025 for (i = 0; i <= ADV_MAX_TID; i++)
3026 seq_printf(m, " %c",
3027 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3030 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3031 word = ep_3550->start_motor;
3032 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
3033 word = ep_38C0800->start_motor;
3035 word = ep_38C1600->start_motor;
3037 seq_puts(m, " Start Motor: ");
3038 for (i = 0; i <= ADV_MAX_TID; i++)
3039 seq_printf(m, " %c",
3040 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3043 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3044 seq_puts(m, " Synchronous Transfer:");
3045 for (i = 0; i <= ADV_MAX_TID; i++)
3046 seq_printf(m, " %c",
3047 (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ?
3052 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3053 seq_puts(m, " Ultra Transfer: ");
3054 for (i = 0; i <= ADV_MAX_TID; i++)
3055 seq_printf(m, " %c",
3056 (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i))
3061 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
3062 word = ep_3550->wdtr_able;
3063 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
3064 word = ep_38C0800->wdtr_able;
3066 word = ep_38C1600->wdtr_able;
3068 seq_puts(m, " Wide Transfer: ");
3069 for (i = 0; i <= ADV_MAX_TID; i++)
3070 seq_printf(m, " %c",
3071 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3074 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 ||
3075 adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) {
3076 seq_puts(m, " Synchronous Transfer Speed (Mhz):\n ");
3077 for (i = 0; i <= ADV_MAX_TID; i++) {
3081 sdtr_speed = adv_dvc_varp->sdtr_speed1;
3082 } else if (i == 4) {
3083 sdtr_speed = adv_dvc_varp->sdtr_speed2;
3084 } else if (i == 8) {
3085 sdtr_speed = adv_dvc_varp->sdtr_speed3;
3086 } else if (i == 12) {
3087 sdtr_speed = adv_dvc_varp->sdtr_speed4;
3089 switch (sdtr_speed & ADV_MAX_TID) {
3112 seq_printf(m, "%X:%s ", i, speed_str);
3122 * asc_prt_driver_conf()
3124 static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
3126 struct asc_board *boardp = shost_priv(shost);
3129 "\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n",
3133 " host_busy %d, max_id %u, max_lun %llu, max_channel %u\n",
3134 scsi_host_busy(shost), shost->max_id,
3135 shost->max_lun, shost->max_channel);
3138 " unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n",
3139 shost->unique_id, shost->can_queue, shost->this_id,
3140 shost->sg_tablesize, shost->cmd_per_lun);
3143 " flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n",
3144 boardp->flags, shost->last_reset, jiffies,
3145 boardp->asc_n_io_port);
3147 seq_printf(m, " io_port 0x%lx\n", shost->io_port);
3151 * asc_prt_asc_board_info()
3153 * Print dynamic board configuration information.
3155 static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
3157 struct asc_board *boardp = shost_priv(shost);
3162 int renegotiate = 0;
3164 v = &boardp->dvc_var.asc_dvc_var;
3165 c = &boardp->dvc_cfg.asc_dvc_cfg;
3166 chip_scsi_id = c->chip_scsi_id;
3169 "\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n",
3172 seq_printf(m, " chip_version %u, mcode_date 0x%x, "
3173 "mcode_version 0x%x, err_code %u\n",
3174 c->chip_version, c->mcode_date, c->mcode_version,
3177 /* Current number of commands waiting for the host. */
3179 " Total Command Pending: %d\n", v->cur_total_qng);
3181 seq_puts(m, " Command Queuing:");
3182 for (i = 0; i <= ASC_MAX_TID; i++) {
3183 if ((chip_scsi_id == i) ||
3184 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3187 seq_printf(m, " %X:%c",
3189 (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3192 /* Current number of commands waiting for a device. */
3193 seq_puts(m, "\n Command Queue Pending:");
3194 for (i = 0; i <= ASC_MAX_TID; i++) {
3195 if ((chip_scsi_id == i) ||
3196 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3199 seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]);
3202 /* Current limit on number of commands that can be sent to a device. */
3203 seq_puts(m, "\n Command Queue Limit:");
3204 for (i = 0; i <= ASC_MAX_TID; i++) {
3205 if ((chip_scsi_id == i) ||
3206 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3209 seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]);
3212 /* Indicate whether the device has returned queue full status. */
3213 seq_puts(m, "\n Command Queue Full:");
3214 for (i = 0; i <= ASC_MAX_TID; i++) {
3215 if ((chip_scsi_id == i) ||
3216 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3219 if (boardp->queue_full & ADV_TID_TO_TIDMASK(i))
3220 seq_printf(m, " %X:Y-%d",
3221 i, boardp->queue_full_cnt[i]);
3223 seq_printf(m, " %X:N", i);
3226 seq_puts(m, "\n Synchronous Transfer:");
3227 for (i = 0; i <= ASC_MAX_TID; i++) {
3228 if ((chip_scsi_id == i) ||
3229 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3232 seq_printf(m, " %X:%c",
3234 (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3238 for (i = 0; i <= ASC_MAX_TID; i++) {
3239 uchar syn_period_ix;
3241 if ((chip_scsi_id == i) ||
3242 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) ||
3243 ((v->init_sdtr & ADV_TID_TO_TIDMASK(i)) == 0)) {
3247 seq_printf(m, " %X:", i);
3249 if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) {
3250 seq_puts(m, " Asynchronous");
3253 (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index -
3257 " Transfer Period Factor: %d (%d.%d Mhz),",
3258 v->sdtr_period_tbl[syn_period_ix],
3259 250 / v->sdtr_period_tbl[syn_period_ix],
3261 v->sdtr_period_tbl[syn_period_ix]));
3263 seq_printf(m, " REQ/ACK Offset: %d",
3264 boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET);
3267 if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
3276 seq_puts(m, " * = Re-negotiation pending before next command.\n");
3281 * asc_prt_adv_board_info()
3283 * Print dynamic board configuration information.
3285 static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
3287 struct asc_board *boardp = shost_priv(shost);
3291 AdvPortAddr iop_base;
3292 ushort chip_scsi_id;
3296 ushort sdtr_able, wdtr_able;
3297 ushort wdtr_done, sdtr_done;
3299 int renegotiate = 0;
3301 v = &boardp->dvc_var.adv_dvc_var;
3302 c = &boardp->dvc_cfg.adv_dvc_cfg;
3303 iop_base = v->iop_base;
3304 chip_scsi_id = v->chip_scsi_id;
3307 "\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n",
3311 " iop_base 0x%lx, cable_detect: %X, err_code %u\n",
3312 (unsigned long)v->iop_base,
3313 AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT,
3316 seq_printf(m, " chip_version %u, mcode_date 0x%x, "
3317 "mcode_version 0x%x\n", c->chip_version,
3318 c->mcode_date, c->mcode_version);
3320 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
3321 seq_puts(m, " Queuing Enabled:");
3322 for (i = 0; i <= ADV_MAX_TID; i++) {
3323 if ((chip_scsi_id == i) ||
3324 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3328 seq_printf(m, " %X:%c",
3330 (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3333 seq_puts(m, "\n Queue Limit:");
3334 for (i = 0; i <= ADV_MAX_TID; i++) {
3335 if ((chip_scsi_id == i) ||
3336 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3340 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i,
3343 seq_printf(m, " %X:%d", i, lrambyte);
3346 seq_puts(m, "\n Command Pending:");
3347 for (i = 0; i <= ADV_MAX_TID; i++) {
3348 if ((chip_scsi_id == i) ||
3349 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3353 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i,
3356 seq_printf(m, " %X:%d", i, lrambyte);
3360 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
3361 seq_puts(m, " Wide Enabled:");
3362 for (i = 0; i <= ADV_MAX_TID; i++) {
3363 if ((chip_scsi_id == i) ||
3364 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3368 seq_printf(m, " %X:%c",
3370 (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3374 AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done);
3375 seq_puts(m, " Transfer Bit Width:");
3376 for (i = 0; i <= ADV_MAX_TID; i++) {
3377 if ((chip_scsi_id == i) ||
3378 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3382 AdvReadWordLram(iop_base,
3383 ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),
3386 seq_printf(m, " %X:%d",
3387 i, (lramword & 0x8000) ? 16 : 8);
3389 if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) &&
3390 (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
3397 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
3398 seq_puts(m, " Synchronous Enabled:");
3399 for (i = 0; i <= ADV_MAX_TID; i++) {
3400 if ((chip_scsi_id == i) ||
3401 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
3405 seq_printf(m, " %X:%c",
3407 (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
3411 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done);
3412 for (i = 0; i <= ADV_MAX_TID; i++) {
3414 AdvReadWordLram(iop_base,
3415 ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),
3417 lramword &= ~0x8000;
3419 if ((chip_scsi_id == i) ||
3420 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) ||
3421 ((sdtr_able & ADV_TID_TO_TIDMASK(i)) == 0)) {
3425 seq_printf(m, " %X:", i);
3427 if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */
3428 seq_puts(m, " Asynchronous");
3430 seq_puts(m, " Transfer Period Factor: ");
3432 if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */
3433 seq_puts(m, "9 (80.0 Mhz),");
3434 } else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */
3435 seq_puts(m, "10 (40.0 Mhz),");
3436 } else { /* 20 Mhz or below. */
3438 period = (((lramword >> 8) * 25) + 50) / 4;
3440 if (period == 0) { /* Should never happen. */
3441 seq_printf(m, "%d (? Mhz), ", period);
3445 period, 250 / period,
3446 ASC_TENTHS(250, period));
3450 seq_printf(m, " REQ/ACK Offset: %d",
3454 if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
3463 seq_puts(m, " * = Re-negotiation pending before next command.\n");
3467 #ifdef ADVANSYS_STATS
3469 * asc_prt_board_stats()
3471 static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost)
3473 struct asc_board *boardp = shost_priv(shost);
3474 struct asc_stats *s = &boardp->asc_stats;
3477 "\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n",
3481 " queuecommand %u, reset %u, biosparam %u, interrupt %u\n",
3482 s->queuecommand, s->reset, s->biosparam,
3486 " callback %u, done %u, build_error %u, build_noreq %u, build_nosg %u\n",
3487 s->callback, s->done, s->build_error,
3488 s->adv_build_noreq, s->adv_build_nosg);
3491 " exe_noerror %u, exe_busy %u, exe_error %u, exe_unknown %u\n",
3492 s->exe_noerror, s->exe_busy, s->exe_error,
3496 * Display data transfer statistics.
3498 if (s->xfer_cnt > 0) {
3499 seq_printf(m, " xfer_cnt %u, xfer_elem %u, ",
3500 s->xfer_cnt, s->xfer_elem);
3502 seq_printf(m, "xfer_bytes %u.%01u kb\n",
3503 s->xfer_sect / 2, ASC_TENTHS(s->xfer_sect, 2));
3505 /* Scatter gather transfer statistics */
3506 seq_printf(m, " avg_num_elem %u.%01u, ",
3507 s->xfer_elem / s->xfer_cnt,
3508 ASC_TENTHS(s->xfer_elem, s->xfer_cnt));
3510 seq_printf(m, "avg_elem_size %u.%01u kb, ",
3511 (s->xfer_sect / 2) / s->xfer_elem,
3512 ASC_TENTHS((s->xfer_sect / 2), s->xfer_elem));
3514 seq_printf(m, "avg_xfer_size %u.%01u kb\n",
3515 (s->xfer_sect / 2) / s->xfer_cnt,
3516 ASC_TENTHS((s->xfer_sect / 2), s->xfer_cnt));
3519 #endif /* ADVANSYS_STATS */
3522 * advansys_show_info() - /proc/scsi/advansys/{0,1,2,3,...}
3524 * m: seq_file to print into
3527 * Return the number of bytes read from or written to a
3528 * /proc/scsi/advansys/[0...] file.
3531 advansys_show_info(struct seq_file *m, struct Scsi_Host *shost)
3533 struct asc_board *boardp = shost_priv(shost);
3535 ASC_DBG(1, "begin\n");
3538 * User read of /proc/scsi/advansys/[0...] file.
3542 * Get board configuration information.
3544 * advansys_info() returns the board string from its own static buffer.
3546 /* Copy board information. */
3547 seq_printf(m, "%s\n", (char *)advansys_info(shost));
3549 * Display Wide Board BIOS Information.
3551 if (!ASC_NARROW_BOARD(boardp))
3552 asc_prt_adv_bios(m, shost);
3555 * Display driver information for each device attached to the board.
3557 asc_prt_board_devices(m, shost);
3560 * Display EEPROM configuration for the board.
3562 if (ASC_NARROW_BOARD(boardp))
3563 asc_prt_asc_board_eeprom(m, shost);
3565 asc_prt_adv_board_eeprom(m, shost);
3568 * Display driver configuration and information for the board.
3570 asc_prt_driver_conf(m, shost);
3572 #ifdef ADVANSYS_STATS
3574 * Display driver statistics for the board.
3576 asc_prt_board_stats(m, shost);
3577 #endif /* ADVANSYS_STATS */
3580 * Display Asc Library dynamic configuration information
3583 if (ASC_NARROW_BOARD(boardp))
3584 asc_prt_asc_board_info(m, shost);
3586 asc_prt_adv_board_info(m, shost);
3589 #endif /* CONFIG_PROC_FS */
3591 static void asc_scsi_done(struct scsi_cmnd *scp)
3593 scsi_dma_unmap(scp);
3594 ASC_STATS(scp->device->host, done);
3595 scp->scsi_done(scp);
3598 static void AscSetBank(PortAddr iop_base, uchar bank)
3602 val = AscGetChipControl(iop_base) &
3604 (CC_SINGLE_STEP | CC_TEST | CC_DIAG | CC_SCSI_RESET |
3608 } else if (bank == 2) {
3609 val |= CC_DIAG | CC_BANK_ONE;
3611 val &= ~CC_BANK_ONE;
3613 AscSetChipControl(iop_base, val);
3616 static void AscSetChipIH(PortAddr iop_base, ushort ins_code)
3618 AscSetBank(iop_base, 1);
3619 AscWriteChipIH(iop_base, ins_code);
3620 AscSetBank(iop_base, 0);
3623 static int AscStartChip(PortAddr iop_base)
3625 AscSetChipControl(iop_base, 0);
3626 if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) {
3632 static bool AscStopChip(PortAddr iop_base)
3637 AscGetChipControl(iop_base) &
3638 (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG));
3639 AscSetChipControl(iop_base, (uchar)(cc_val | CC_HALT));
3640 AscSetChipIH(iop_base, INS_HALT);
3641 AscSetChipIH(iop_base, INS_RFLAG_WTM);
3642 if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) {
3648 static bool AscIsChipHalted(PortAddr iop_base)
3650 if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) {
3651 if ((AscGetChipControl(iop_base) & CC_HALT) != 0) {
3658 static bool AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc)
3663 iop_base = asc_dvc->iop_base;
3664 while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE)
3668 AscStopChip(iop_base);
3669 AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT);
3671 AscSetChipIH(iop_base, INS_RFLAG_WTM);
3672 AscSetChipIH(iop_base, INS_HALT);
3673 AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT);
3674 AscSetChipControl(iop_base, CC_HALT);
3676 AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT);
3677 AscSetChipStatus(iop_base, 0);
3678 return (AscIsChipHalted(iop_base));
3681 static int AscFindSignature(PortAddr iop_base)
3685 ASC_DBG(1, "AscGetChipSignatureByte(0x%x) 0x%x\n",
3686 iop_base, AscGetChipSignatureByte(iop_base));
3687 if (AscGetChipSignatureByte(iop_base) == (uchar)ASC_1000_ID1B) {
3688 ASC_DBG(1, "AscGetChipSignatureWord(0x%x) 0x%x\n",
3689 iop_base, AscGetChipSignatureWord(iop_base));
3690 sig_word = AscGetChipSignatureWord(iop_base);
3691 if ((sig_word == (ushort)ASC_1000_ID0W) ||
3692 (sig_word == (ushort)ASC_1000_ID0W_FIX)) {
3699 static void AscEnableInterrupt(PortAddr iop_base)
3703 cfg = AscGetChipCfgLsw(iop_base);
3704 AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON);
3707 static void AscDisableInterrupt(PortAddr iop_base)
3711 cfg = AscGetChipCfgLsw(iop_base);
3712 AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON));
3715 static uchar AscReadLramByte(PortAddr iop_base, ushort addr)
3717 unsigned char byte_data;
3718 unsigned short word_data;
3720 if (isodd_word(addr)) {
3721 AscSetChipLramAddr(iop_base, addr - 1);
3722 word_data = AscGetChipLramData(iop_base);
3723 byte_data = (word_data >> 8) & 0xFF;
3725 AscSetChipLramAddr(iop_base, addr);
3726 word_data = AscGetChipLramData(iop_base);
3727 byte_data = word_data & 0xFF;
3732 static ushort AscReadLramWord(PortAddr iop_base, ushort addr)
3736 AscSetChipLramAddr(iop_base, addr);
3737 word_data = AscGetChipLramData(iop_base);
3742 AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words)
3746 AscSetChipLramAddr(iop_base, s_addr);
3747 for (i = 0; i < words; i++) {
3748 AscSetChipLramData(iop_base, set_wval);
3752 static void AscWriteLramWord(PortAddr iop_base, ushort addr, ushort word_val)
3754 AscSetChipLramAddr(iop_base, addr);
3755 AscSetChipLramData(iop_base, word_val);
3758 static void AscWriteLramByte(PortAddr iop_base, ushort addr, uchar byte_val)
3762 if (isodd_word(addr)) {
3764 word_data = AscReadLramWord(iop_base, addr);
3765 word_data &= 0x00FF;
3766 word_data |= (((ushort)byte_val << 8) & 0xFF00);
3768 word_data = AscReadLramWord(iop_base, addr);
3769 word_data &= 0xFF00;
3770 word_data |= ((ushort)byte_val & 0x00FF);
3772 AscWriteLramWord(iop_base, addr, word_data);
3776 * Copy 2 bytes to LRAM.
3778 * The source data is assumed to be in little-endian order in memory
3779 * and is maintained in little-endian order when written to LRAM.
3782 AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr,
3783 const uchar *s_buffer, int words)
3787 AscSetChipLramAddr(iop_base, s_addr);
3788 for (i = 0; i < 2 * words; i += 2) {
3790 * On a little-endian system the second argument below
3791 * produces a little-endian ushort which is written to
3792 * LRAM in little-endian order. On a big-endian system
3793 * the second argument produces a big-endian ushort which
3794 * is "transparently" byte-swapped by outpw() and written
3795 * in little-endian order to LRAM.
3797 outpw(iop_base + IOP_RAM_DATA,
3798 ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]);
3803 * Copy 4 bytes to LRAM.
3805 * The source data is assumed to be in little-endian order in memory
3806 * and is maintained in little-endian order when written to LRAM.
3809 AscMemDWordCopyPtrToLram(PortAddr iop_base,
3810 ushort s_addr, uchar *s_buffer, int dwords)
3814 AscSetChipLramAddr(iop_base, s_addr);
3815 for (i = 0; i < 4 * dwords; i += 4) {
3816 outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); /* LSW */
3817 outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 3] << 8) | s_buffer[i + 2]); /* MSW */
3822 * Copy 2 bytes from LRAM.
3824 * The source data is assumed to be in little-endian order in LRAM
3825 * and is maintained in little-endian order when written to memory.
3828 AscMemWordCopyPtrFromLram(PortAddr iop_base,
3829 ushort s_addr, uchar *d_buffer, int words)
3834 AscSetChipLramAddr(iop_base, s_addr);
3835 for (i = 0; i < 2 * words; i += 2) {
3836 word = inpw(iop_base + IOP_RAM_DATA);
3837 d_buffer[i] = word & 0xff;
3838 d_buffer[i + 1] = (word >> 8) & 0xff;
3842 static u32 AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
3847 for (i = 0; i < words; i++, s_addr += 2) {
3848 sum += AscReadLramWord(iop_base, s_addr);
3853 static void AscInitLram(ASC_DVC_VAR *asc_dvc)
3859 iop_base = asc_dvc->iop_base;
3860 AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0,
3861 (ushort)(((int)(asc_dvc->max_total_qng + 2 + 1) *
3863 i = ASC_MIN_ACTIVE_QNO;
3864 s_addr = ASC_QADR_BEG + ASC_QBLK_SIZE;
3865 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD),
3867 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD),
3868 (uchar)(asc_dvc->max_total_qng));
3869 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO),
3872 s_addr += ASC_QBLK_SIZE;
3873 for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE) {
3874 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD),
3876 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD),
3878 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO),
3881 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD),
3882 (uchar)ASC_QLINK_END);
3883 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD),
3884 (uchar)(asc_dvc->max_total_qng - 1));
3885 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO),
3886 (uchar)asc_dvc->max_total_qng);
3888 s_addr += ASC_QBLK_SIZE;
3889 for (; i <= (uchar)(asc_dvc->max_total_qng + 3);
3890 i++, s_addr += ASC_QBLK_SIZE) {
3891 AscWriteLramByte(iop_base,
3892 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_FWD), i);
3893 AscWriteLramByte(iop_base,
3894 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_BWD), i);
3895 AscWriteLramByte(iop_base,
3896 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_QNO), i);
3901 AscLoadMicroCode(PortAddr iop_base, ushort s_addr,
3902 const uchar *mcode_buf, ushort mcode_size)
3905 ushort mcode_word_size;
3906 ushort mcode_chksum;
3908 /* Write the microcode buffer starting at LRAM address 0. */
3909 mcode_word_size = (ushort)(mcode_size >> 1);
3910 AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size);
3911 AscMemWordCopyPtrToLram(iop_base, s_addr, mcode_buf, mcode_word_size);
3913 chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size);
3914 ASC_DBG(1, "chksum 0x%lx\n", (ulong)chksum);
3915 mcode_chksum = (ushort)AscMemSumLramWord(iop_base,
3916 (ushort)ASC_CODE_SEC_BEG,
3917 (ushort)((mcode_size -
3921 ASC_DBG(1, "mcode_chksum 0x%lx\n", (ulong)mcode_chksum);
3922 AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W, mcode_chksum);
3923 AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W, mcode_size);
3927 static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc)
3933 iop_base = asc_dvc->iop_base;
3934 AscPutRiscVarFreeQHead(iop_base, 1);
3935 AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng);
3936 AscPutVarFreeQHead(iop_base, 1);
3937 AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng);
3938 AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B,
3939 (uchar)((int)asc_dvc->max_total_qng + 1));
3940 AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B,
3941 (uchar)((int)asc_dvc->max_total_qng + 2));
3942 AscWriteLramByte(iop_base, (ushort)ASCV_TOTAL_READY_Q_B,
3943 asc_dvc->max_total_qng);
3944 AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W, 0);
3945 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
3946 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 0);
3947 AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B, 0);
3948 AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B, 0);
3949 AscPutQDoneInProgress(iop_base, 0);
3950 lram_addr = ASC_QADR_BEG;
3951 for (i = 0; i < 32; i++, lram_addr += 2) {
3952 AscWriteLramWord(iop_base, lram_addr, 0);
3956 static int AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
3963 struct asc_board *board = asc_dvc_to_board(asc_dvc);
3965 iop_base = asc_dvc->iop_base;
3967 for (i = 0; i <= ASC_MAX_TID; i++) {
3968 AscPutMCodeInitSDTRAtID(iop_base, i,
3969 asc_dvc->cfg->sdtr_period_offset[i]);
3972 AscInitQLinkVar(asc_dvc);
3973 AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B,
3974 asc_dvc->cfg->disc_enable);
3975 AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B,
3976 ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id));
3978 /* Ensure overrun buffer is aligned on an 8 byte boundary. */
3979 BUG_ON((unsigned long)asc_dvc->overrun_buf & 7);
3980 asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf,
3981 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
3982 if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) {
3983 warn_code = -ENOMEM;
3986 phy_addr = cpu_to_le32(asc_dvc->overrun_dma);
3987 AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D,
3988 (uchar *)&phy_addr, 1);
3989 phy_size = cpu_to_le32(ASC_OVERRUN_BSIZE);
3990 AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_BSIZE_D,
3991 (uchar *)&phy_size, 1);
3993 asc_dvc->cfg->mcode_date =
3994 AscReadLramWord(iop_base, (ushort)ASCV_MC_DATE_W);
3995 asc_dvc->cfg->mcode_version =
3996 AscReadLramWord(iop_base, (ushort)ASCV_MC_VER_W);
3998 AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
3999 if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
4000 asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
4001 warn_code = -EINVAL;
4002 goto err_mcode_start;
4004 if (AscStartChip(iop_base) != 1) {
4005 asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
4007 goto err_mcode_start;
4013 dma_unmap_single(board->dev, asc_dvc->overrun_dma,
4014 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
4016 asc_dvc->overrun_dma = 0;
4020 static int AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
4022 const struct firmware *fw;
4023 const char fwname[] = "advansys/mcode.bin";
4025 unsigned long chksum;
4029 iop_base = asc_dvc->iop_base;
4031 if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI) &&
4032 !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE)) {
4033 AscResetChipAndScsiBus(asc_dvc);
4034 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */
4036 asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC;
4037 if (asc_dvc->err_code != 0)
4039 if (!AscFindSignature(asc_dvc->iop_base)) {
4040 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
4043 AscDisableInterrupt(iop_base);
4044 AscInitLram(asc_dvc);
4046 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev);
4048 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
4050 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
4054 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
4056 release_firmware(fw);
4057 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
4060 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
4061 (fw->data[1] << 8) | fw->data[0];
4062 ASC_DBG(1, "_asc_mcode_chksum 0x%lx\n", (ulong)chksum);
4063 if (AscLoadMicroCode(iop_base, 0, &fw->data[4],
4064 fw->size - 4) != chksum) {
4065 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
4066 release_firmware(fw);
4069 release_firmware(fw);
4070 warn_code |= AscInitMicroCodeVar(asc_dvc);
4071 if (!asc_dvc->overrun_dma)
4073 asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC;
4074 AscEnableInterrupt(iop_base);
4079 * Load the Microcode
4081 * Write the microcode image to RISC memory starting at address 0.
4083 * The microcode is stored compressed in the following format:
4085 * 254 word (508 byte) table indexed by byte code followed
4086 * by the following byte codes:
4089 * 00: Emit word 0 in table.
4090 * 01: Emit word 1 in table.
4092 * FD: Emit word 253 in table.
4095 * FE WW WW: (3 byte code) Word to emit is the next word WW WW.
4096 * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW.
4098 * Returns 0 or an error if the checksum doesn't match
4100 static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf,
4101 int size, int memsize, int chksum)
4103 int i, j, end, len = 0;
4106 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
4108 for (i = 253 * 2; i < size; i++) {
4109 if (buf[i] == 0xff) {
4110 unsigned short word = (buf[i + 3] << 8) | buf[i + 2];
4111 for (j = 0; j < buf[i + 1]; j++) {
4112 AdvWriteWordAutoIncLram(iop_base, word);
4116 } else if (buf[i] == 0xfe) {
4117 unsigned short word = (buf[i + 2] << 8) | buf[i + 1];
4118 AdvWriteWordAutoIncLram(iop_base, word);
4122 unsigned int off = buf[i] * 2;
4123 unsigned short word = (buf[off + 1] << 8) | buf[off];
4124 AdvWriteWordAutoIncLram(iop_base, word);
4131 while (len < memsize) {
4132 AdvWriteWordAutoIncLram(iop_base, 0);
4136 /* Verify the microcode checksum. */
4138 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
4140 for (len = 0; len < end; len += 2) {
4141 sum += AdvReadWordAutoIncLram(iop_base);
4145 return ASC_IERR_MCODE_CHKSUM;
4150 static void AdvBuildCarrierFreelist(struct adv_dvc_var *adv_dvc)
4152 off_t carr_offset = 0, next_offset;
4153 dma_addr_t carr_paddr;
4154 int carr_num = ADV_CARRIER_BUFSIZE / sizeof(ADV_CARR_T), i;
4156 for (i = 0; i < carr_num; i++) {
4157 carr_offset = i * sizeof(ADV_CARR_T);
4158 /* Get physical address of the carrier 'carrp'. */
4159 carr_paddr = adv_dvc->carrier_addr + carr_offset;
4161 adv_dvc->carrier[i].carr_pa = cpu_to_le32(carr_paddr);
4162 adv_dvc->carrier[i].carr_va = cpu_to_le32(carr_offset);
4163 adv_dvc->carrier[i].areq_vpa = 0;
4164 next_offset = carr_offset + sizeof(ADV_CARR_T);
4167 adv_dvc->carrier[i].next_vpa = cpu_to_le32(next_offset);
4170 * We cannot have a carrier with 'carr_va' of '0', as
4171 * a reference to this carrier would be interpreted as
4173 * So start at carrier 1 with the freelist.
4175 adv_dvc->carr_freelist = &adv_dvc->carrier[1];
4178 static ADV_CARR_T *adv_get_carrier(struct adv_dvc_var *adv_dvc, u32 offset)
4182 BUG_ON(offset > ADV_CARRIER_BUFSIZE);
4184 index = offset / sizeof(ADV_CARR_T);
4185 return &adv_dvc->carrier[index];
4188 static ADV_CARR_T *adv_get_next_carrier(struct adv_dvc_var *adv_dvc)
4190 ADV_CARR_T *carrp = adv_dvc->carr_freelist;
4191 u32 next_vpa = le32_to_cpu(carrp->next_vpa);
4193 if (next_vpa == 0 || next_vpa == ~0) {
4194 ASC_DBG(1, "invalid vpa offset 0x%x\n", next_vpa);
4198 adv_dvc->carr_freelist = adv_get_carrier(adv_dvc, next_vpa);
4200 * insert stopper carrier to terminate list
4202 carrp->next_vpa = cpu_to_le32(ADV_CQ_STOPPER);
4208 * 'offset' is the index in the request pointer array
4210 static adv_req_t * adv_get_reqp(struct adv_dvc_var *adv_dvc, u32 offset)
4212 struct asc_board *boardp = adv_dvc->drv_ptr;
4214 BUG_ON(offset > adv_dvc->max_host_qng);
4215 return &boardp->adv_reqp[offset];
4219 * Send an idle command to the chip and wait for completion.
4221 * Command completion is polled for once per microsecond.
4223 * The function can be called from anywhere including an interrupt handler.
4224 * But the function is not re-entrant, so it uses the DvcEnter/LeaveCritical()
4225 * functions to prevent reentrancy.
4228 * ADV_TRUE - command completed successfully
4229 * ADV_FALSE - command failed
4230 * ADV_ERROR - command timed out
4233 AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc,
4234 ushort idle_cmd, u32 idle_cmd_parameter)
4237 AdvPortAddr iop_base;
4239 iop_base = asc_dvc->iop_base;
4242 * Clear the idle command status which is set by the microcode
4243 * to a non-zero value to indicate when the command is completed.
4244 * The non-zero result is one of the IDLE_CMD_STATUS_* values
4246 AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0);
4249 * Write the idle command value after the idle command parameter
4250 * has been written to avoid a race condition. If the order is not
4251 * followed, the microcode may process the idle command before the
4252 * parameters have been written to LRAM.
4254 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IDLE_CMD_PARAMETER,
4255 cpu_to_le32(idle_cmd_parameter));
4256 AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd);
4259 * Tickle the RISC to tell it to process the idle command.
4261 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_B);
4262 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) {
4264 * Clear the tickle value. In the ASC-3550 the RISC flag
4265 * command 'clr_tickle_b' does not work unless the host
4268 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP);
4271 /* Wait for up to 100 millisecond for the idle command to timeout. */
4272 for (i = 0; i < SCSI_WAIT_100_MSEC; i++) {
4273 /* Poll once each microsecond for command completion. */
4274 for (j = 0; j < SCSI_US_PER_MSEC; j++) {
4275 AdvReadWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS,
4283 BUG(); /* The idle command should never timeout. */
4288 * Reset SCSI Bus and purge all outstanding requests.
4291 * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset.
4292 * ADV_FALSE(0) - Microcode command failed.
4293 * ADV_ERROR(-1) - Microcode command timed-out. Microcode or IC
4294 * may be hung which requires driver recovery.
4296 static int AdvResetSB(ADV_DVC_VAR *asc_dvc)
4301 * Send the SCSI Bus Reset idle start idle command which asserts
4302 * the SCSI Bus Reset signal.
4304 status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_START, 0L);
4305 if (status != ADV_TRUE) {
4310 * Delay for the specified SCSI Bus Reset hold time.
4312 * The hold time delay is done on the host because the RISC has no
4313 * microsecond accurate timer.
4315 udelay(ASC_SCSI_RESET_HOLD_TIME_US);
4318 * Send the SCSI Bus Reset end idle command which de-asserts
4319 * the SCSI Bus Reset signal and purges any pending requests.
4321 status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_END, 0L);
4322 if (status != ADV_TRUE) {
4326 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */
4332 * Initialize the ASC-3550.
4334 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
4336 * For a non-fatal error return a warning code. If there are no warnings
4337 * then 0 is returned.
4339 * Needed after initialization for error recovery.
4341 static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
4343 const struct firmware *fw;
4344 const char fwname[] = "advansys/3550.bin";
4345 AdvPortAddr iop_base;
4353 unsigned long chksum;
4356 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */
4357 ushort wdtr_able = 0, sdtr_able, tagqng_able;
4358 uchar max_cmd[ADV_MAX_TID + 1];
4360 /* If there is already an error, don't continue. */
4361 if (asc_dvc->err_code != 0)
4365 * The caller must set 'chip_type' to ADV_CHIP_ASC3550.
4367 if (asc_dvc->chip_type != ADV_CHIP_ASC3550) {
4368 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE;
4373 iop_base = asc_dvc->iop_base;
4376 * Save the RISC memory BIOS region before writing the microcode.
4377 * The BIOS may already be loaded and using its RISC LRAM region
4378 * so its region must be saved and restored.
4380 * Note: This code makes the assumption, which is currently true,
4381 * that a chip reset does not clear RISC LRAM.
4383 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
4384 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
4389 * Save current per TID negotiated values.
4391 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 0x55AA) {
4392 ushort bios_version, major, minor;
4395 bios_mem[(ASC_MC_BIOS_VERSION - ASC_MC_BIOSMEM) / 2];
4396 major = (bios_version >> 12) & 0xF;
4397 minor = (bios_version >> 8) & 0xF;
4398 if (major < 3 || (major == 3 && minor == 1)) {
4399 /* BIOS 3.1 and earlier location of 'wdtr_able' variable. */
4400 AdvReadWordLram(iop_base, 0x120, wdtr_able);
4402 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
4405 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
4406 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
4407 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
4408 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
4412 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev);
4414 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
4416 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
4420 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
4422 release_firmware(fw);
4423 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
4426 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
4427 (fw->data[1] << 8) | fw->data[0];
4428 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4],
4429 fw->size - 4, ADV_3550_MEMSIZE,
4431 release_firmware(fw);
4432 if (asc_dvc->err_code)
4436 * Restore the RISC memory BIOS region.
4438 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
4439 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
4444 * Calculate and write the microcode code checksum to the microcode
4445 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
4447 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
4448 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
4450 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
4451 for (word = begin_addr; word < end_addr; word += 2) {
4452 code_sum += AdvReadWordAutoIncLram(iop_base);
4454 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
4457 * Read and save microcode version and date.
4459 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE,
4460 asc_dvc->cfg->mcode_date);
4461 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM,
4462 asc_dvc->cfg->mcode_version);
4465 * Set the chip type to indicate the ASC3550.
4467 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC3550);
4470 * If the PCI Configuration Command Register "Parity Error Response
4471 * Control" Bit was clear (0), then set the microcode variable
4472 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
4473 * to ignore DMA parity errors.
4475 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) {
4476 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
4477 word |= CONTROL_FLAG_IGNORE_PERR;
4478 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
4482 * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a FIFO
4483 * threshold of 128 bytes. This register is only accessible to the host.
4485 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
4486 START_CTL_EMFU | READ_CMD_MRM);
4489 * Microcode operating variables for WDTR, SDTR, and command tag
4490 * queuing will be set in slave_configure() based on what a
4491 * device reports it is capable of in Inquiry byte 7.
4493 * If SCSI Bus Resets have been disabled, then directly set
4494 * SDTR and WDTR from the EEPROM configuration. This will allow
4495 * the BIOS and warm boot to work without a SCSI bus hang on
4496 * the Inquiry caused by host and target mismatched DTR values.
4497 * Without the SCSI Bus Reset, before an Inquiry a device can't
4498 * be assumed to be in Asynchronous, Narrow mode.
4500 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) {
4501 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE,
4502 asc_dvc->wdtr_able);
4503 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE,
4504 asc_dvc->sdtr_able);
4508 * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2,
4509 * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID
4510 * bitmask. These values determine the maximum SDTR speed negotiated
4513 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
4514 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
4515 * without determining here whether the device supports SDTR.
4517 * 4-bit speed SDTR speed name
4518 * =========== ===============
4519 * 0000b (0x0) SDTR disabled
4521 * 0010b (0x2) 10 Mhz
4522 * 0011b (0x3) 20 Mhz (Ultra)
4523 * 0100b (0x4) 40 Mhz (LVD/Ultra2)
4524 * 0101b (0x5) 80 Mhz (LVD2/Ultra3)
4525 * 0110b (0x6) Undefined
4527 * 1111b (0xF) Undefined
4530 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
4531 if (ADV_TID_TO_TIDMASK(tid) & asc_dvc->ultra_able) {
4532 /* Set Ultra speed for TID 'tid'. */
4533 word |= (0x3 << (4 * (tid % 4)));
4535 /* Set Fast speed for TID 'tid'. */
4536 word |= (0x2 << (4 * (tid % 4)));
4538 if (tid == 3) { /* Check if done with sdtr_speed1. */
4539 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, word);
4541 } else if (tid == 7) { /* Check if done with sdtr_speed2. */
4542 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, word);
4544 } else if (tid == 11) { /* Check if done with sdtr_speed3. */
4545 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, word);
4547 } else if (tid == 15) { /* Check if done with sdtr_speed4. */
4548 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, word);
4554 * Set microcode operating variable for the disconnect per TID bitmask.
4556 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE,
4557 asc_dvc->cfg->disc_enable);
4560 * Set SCSI_CFG0 Microcode Default Value.
4562 * The microcode will set the SCSI_CFG0 register using this value
4563 * after it is started below.
4565 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
4566 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
4567 asc_dvc->chip_scsi_id);
4570 * Determine SCSI_CFG1 Microcode Default Value.
4572 * The microcode will set the SCSI_CFG1 register using this value
4573 * after it is started below.
4576 /* Read current SCSI_CFG1 Register value. */
4577 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
4580 * If all three connectors are in use, return an error.
4582 if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 ||
4583 (scsi_cfg1 & CABLE_ILLEGAL_B) == 0) {
4584 asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION;
4589 * If the internal narrow cable is reversed all of the SCSI_CTRL
4590 * register signals will be set. Check for and return an error if
4591 * this condition is found.
4593 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) {
4594 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
4599 * If this is a differential board and a single-ended device
4600 * is attached to one of the connectors, return an error.
4602 if ((scsi_cfg1 & DIFF_MODE) && (scsi_cfg1 & DIFF_SENSE) == 0) {
4603 asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE;
4608 * If automatic termination control is enabled, then set the
4609 * termination value based on a table listed in a_condor.h.
4611 * If manual termination was specified with an EEPROM setting
4612 * then 'termination' was set-up in AdvInitFrom3550EEPROM() and
4613 * is ready to be 'ored' into SCSI_CFG1.
4615 if (asc_dvc->cfg->termination == 0) {
4617 * The software always controls termination by setting TERM_CTL_SEL.
4618 * If TERM_CTL_SEL were set to 0, the hardware would set termination.
4620 asc_dvc->cfg->termination |= TERM_CTL_SEL;
4622 switch (scsi_cfg1 & CABLE_DETECT) {
4623 /* TERM_CTL_H: on, TERM_CTL_L: on */
4630 asc_dvc->cfg->termination |= (TERM_CTL_H | TERM_CTL_L);
4633 /* TERM_CTL_H: on, TERM_CTL_L: off */
4639 asc_dvc->cfg->termination |= TERM_CTL_H;
4642 /* TERM_CTL_H: off, TERM_CTL_L: off */
4650 * Clear any set TERM_CTL_H and TERM_CTL_L bits.
4652 scsi_cfg1 &= ~TERM_CTL;
4655 * Invert the TERM_CTL_H and TERM_CTL_L bits and then
4656 * set 'scsi_cfg1'. The TERM_POL bit does not need to be
4657 * referenced, because the hardware internally inverts
4658 * the Termination High and Low bits if TERM_POL is set.
4660 scsi_cfg1 |= (TERM_CTL_SEL | (~asc_dvc->cfg->termination & TERM_CTL));
4663 * Set SCSI_CFG1 Microcode Default Value
4665 * Set filter value and possibly modified termination control
4666 * bits in the Microcode SCSI_CFG1 Register Value.
4668 * The microcode will set the SCSI_CFG1 register using this value
4669 * after it is started below.
4671 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1,
4672 FLTR_DISABLE | scsi_cfg1);
4675 * Set MEM_CFG Microcode Default Value
4677 * The microcode will set the MEM_CFG register using this value
4678 * after it is started below.
4680 * MEM_CFG may be accessed as a word or byte, but only bits 0-7
4683 * ASC-3550 has 8KB internal memory.
4685 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
4686 BIOS_EN | RAM_SZ_8KB);
4689 * Set SEL_MASK Microcode Default Value
4691 * The microcode will set the SEL_MASK register using this value
4692 * after it is started below.
4694 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
4695 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
4697 AdvBuildCarrierFreelist(asc_dvc);
4700 * Set-up the Host->RISC Initiator Command Queue (ICQ).
4703 asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
4704 if (!asc_dvc->icq_sp) {
4705 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
4710 * Set RISC ICQ physical address start value.
4712 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
4715 * Set-up the RISC->Host Initiator Response Queue (IRQ).
4717 asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
4718 if (!asc_dvc->irq_sp) {
4719 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
4724 * Set RISC IRQ physical address start value.
4726 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
4727 asc_dvc->carr_pending_cnt = 0;
4729 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
4730 (ADV_INTR_ENABLE_HOST_INTR |
4731 ADV_INTR_ENABLE_GLOBAL_INTR));
4733 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
4734 AdvWriteWordRegister(iop_base, IOPW_PC, word);
4736 /* finally, finally, gentlemen, start your engine */
4737 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
4740 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
4741 * Resets should be performed. The RISC has to be running
4742 * to issue a SCSI Bus Reset.
4744 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) {
4746 * If the BIOS Signature is present in memory, restore the
4747 * BIOS Handshake Configuration Table and do not perform
4750 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] ==
4753 * Restore per TID negotiated values.
4755 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
4756 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
4757 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE,
4759 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
4760 AdvWriteByteLram(iop_base,
4761 ASC_MC_NUMBER_OF_MAX_CMD + tid,
4765 if (AdvResetSB(asc_dvc) != ADV_TRUE) {
4766 warn_code = ASC_WARN_BUSRESET_ERROR;
4775 * Initialize the ASC-38C0800.
4777 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
4779 * For a non-fatal error return a warning code. If there are no warnings
4780 * then 0 is returned.
4782 * Needed after initialization for error recovery.
4784 static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
4786 const struct firmware *fw;
4787 const char fwname[] = "advansys/38C0800.bin";
4788 AdvPortAddr iop_base;
4796 unsigned long chksum;
4800 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */
4801 ushort wdtr_able, sdtr_able, tagqng_able;
4802 uchar max_cmd[ADV_MAX_TID + 1];
4804 /* If there is already an error, don't continue. */
4805 if (asc_dvc->err_code != 0)
4809 * The caller must set 'chip_type' to ADV_CHIP_ASC38C0800.
4811 if (asc_dvc->chip_type != ADV_CHIP_ASC38C0800) {
4812 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE;
4817 iop_base = asc_dvc->iop_base;
4820 * Save the RISC memory BIOS region before writing the microcode.
4821 * The BIOS may already be loaded and using its RISC LRAM region
4822 * so its region must be saved and restored.
4824 * Note: This code makes the assumption, which is currently true,
4825 * that a chip reset does not clear RISC LRAM.
4827 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
4828 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
4833 * Save current per TID negotiated values.
4835 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
4836 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
4837 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
4838 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
4839 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
4844 * RAM BIST (RAM Built-In Self Test)
4846 * Address : I/O base + offset 0x38h register (byte).
4847 * Function: Bit 7-6(RW) : RAM mode
4848 * Normal Mode : 0x00
4849 * Pre-test Mode : 0x40
4850 * RAM Test Mode : 0x80
4852 * Bit 4(RO) : Done bit
4853 * Bit 3-0(RO) : Status
4855 * Int_RAM Error : 0x04
4860 * Note: RAM BIST code should be put right here, before loading the
4861 * microcode and after saving the RISC memory BIOS region.
4867 * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds.
4868 * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return
4869 * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset
4870 * to NORMAL_MODE, return an error too.
4872 for (i = 0; i < 2; i++) {
4873 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE);
4874 mdelay(10); /* Wait for 10ms before reading back. */
4875 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
4876 if ((byte & RAM_TEST_DONE) == 0
4877 || (byte & 0x0F) != PRE_TEST_VALUE) {
4878 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST;
4882 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
4883 mdelay(10); /* Wait for 10ms before reading back. */
4884 if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST)
4886 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST;
4892 * LRAM Test - It takes about 1.5 ms to run through the test.
4894 * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds.
4895 * If Done bit not set or Status not 0, save register byte, set the
4896 * err_code, and return an error.
4898 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE);
4899 mdelay(10); /* Wait for 10ms before checking status. */
4901 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
4902 if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) {
4903 /* Get here if Done bit not set or Status not 0. */
4904 asc_dvc->bist_err_code = byte; /* for BIOS display message */
4905 asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST;
4909 /* We need to reset back to normal mode after LRAM test passes. */
4910 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
4912 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev);
4914 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
4916 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
4920 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
4922 release_firmware(fw);
4923 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
4926 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
4927 (fw->data[1] << 8) | fw->data[0];
4928 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4],
4929 fw->size - 4, ADV_38C0800_MEMSIZE,
4931 release_firmware(fw);
4932 if (asc_dvc->err_code)
4936 * Restore the RISC memory BIOS region.
4938 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
4939 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
4944 * Calculate and write the microcode code checksum to the microcode
4945 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
4947 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
4948 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
4950 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
4951 for (word = begin_addr; word < end_addr; word += 2) {
4952 code_sum += AdvReadWordAutoIncLram(iop_base);
4954 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
4957 * Read microcode version and date.
4959 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE,
4960 asc_dvc->cfg->mcode_date);
4961 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM,
4962 asc_dvc->cfg->mcode_version);
4965 * Set the chip type to indicate the ASC38C0800.
4967 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C0800);
4970 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
4971 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
4972 * cable detection and then we are able to read C_DET[3:0].
4974 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
4975 * Microcode Default Value' section below.
4977 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
4978 AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1,
4979 scsi_cfg1 | DIS_TERM_DRV);
4982 * If the PCI Configuration Command Register "Parity Error Response
4983 * Control" Bit was clear (0), then set the microcode variable
4984 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
4985 * to ignore DMA parity errors.
4987 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) {
4988 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
4989 word |= CONTROL_FLAG_IGNORE_PERR;
4990 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
4994 * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and START_CTL_TH [3:2]
4995 * bits for the default FIFO threshold.
4997 * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes.
4999 * For DMA Errata #4 set the BC_THRESH_ENB bit.
5001 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
5002 BC_THRESH_ENB | FIFO_THRESH_80B | START_CTL_TH |
5006 * Microcode operating variables for WDTR, SDTR, and command tag
5007 * queuing will be set in slave_configure() based on what a
5008 * device reports it is capable of in Inquiry byte 7.
5010 * If SCSI Bus Resets have been disabled, then directly set
5011 * SDTR and WDTR from the EEPROM configuration. This will allow
5012 * the BIOS and warm boot to work without a SCSI bus hang on
5013 * the Inquiry caused by host and target mismatched DTR values.
5014 * Without the SCSI Bus Reset, before an Inquiry a device can't
5015 * be assumed to be in Asynchronous, Narrow mode.
5017 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) {
5018 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE,
5019 asc_dvc->wdtr_able);
5020 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE,
5021 asc_dvc->sdtr_able);
5025 * Set microcode operating variables for DISC and SDTR_SPEED1,
5026 * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM
5027 * configuration values.
5029 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
5030 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
5031 * without determining here whether the device supports SDTR.
5033 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE,
5034 asc_dvc->cfg->disc_enable);
5035 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1);
5036 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2);
5037 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3);
5038 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4);
5041 * Set SCSI_CFG0 Microcode Default Value.
5043 * The microcode will set the SCSI_CFG0 register using this value
5044 * after it is started below.
5046 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
5047 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
5048 asc_dvc->chip_scsi_id);
5051 * Determine SCSI_CFG1 Microcode Default Value.
5053 * The microcode will set the SCSI_CFG1 register using this value
5054 * after it is started below.
5057 /* Read current SCSI_CFG1 Register value. */
5058 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
5061 * If the internal narrow cable is reversed all of the SCSI_CTRL
5062 * register signals will be set. Check for and return an error if
5063 * this condition is found.
5065 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) {
5066 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
5071 * All kind of combinations of devices attached to one of four
5072 * connectors are acceptable except HVD device attached. For example,
5073 * LVD device can be attached to SE connector while SE device attached
5074 * to LVD connector. If LVD device attached to SE connector, it only
5075 * runs up to Ultra speed.
5077 * If an HVD device is attached to one of LVD connectors, return an
5078 * error. However, there is no way to detect HVD device attached to
5081 if (scsi_cfg1 & HVD) {
5082 asc_dvc->err_code = ASC_IERR_HVD_DEVICE;
5087 * If either SE or LVD automatic termination control is enabled, then
5088 * set the termination value based on a table listed in a_condor.h.
5090 * If manual termination was specified with an EEPROM setting then
5091 * 'termination' was set-up in AdvInitFrom38C0800EEPROM() and is ready
5092 * to be 'ored' into SCSI_CFG1.
5094 if ((asc_dvc->cfg->termination & TERM_SE) == 0) {
5095 /* SE automatic termination control is enabled. */
5096 switch (scsi_cfg1 & C_DET_SE) {
5097 /* TERM_SE_HI: on, TERM_SE_LO: on */
5101 asc_dvc->cfg->termination |= TERM_SE;
5104 /* TERM_SE_HI: on, TERM_SE_LO: off */
5106 asc_dvc->cfg->termination |= TERM_SE_HI;
5111 if ((asc_dvc->cfg->termination & TERM_LVD) == 0) {
5112 /* LVD automatic termination control is enabled. */
5113 switch (scsi_cfg1 & C_DET_LVD) {
5114 /* TERM_LVD_HI: on, TERM_LVD_LO: on */
5118 asc_dvc->cfg->termination |= TERM_LVD;
5121 /* TERM_LVD_HI: off, TERM_LVD_LO: off */
5128 * Clear any set TERM_SE and TERM_LVD bits.
5130 scsi_cfg1 &= (~TERM_SE & ~TERM_LVD);
5133 * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'.
5135 scsi_cfg1 |= (~asc_dvc->cfg->termination & 0xF0);
5138 * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE
5139 * bits and set possibly modified termination control bits in the
5140 * Microcode SCSI_CFG1 Register Value.
5142 scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL & ~HVD_LVD_SE);
5145 * Set SCSI_CFG1 Microcode Default Value
5147 * Set possibly modified termination control and reset DIS_TERM_DRV
5148 * bits in the Microcode SCSI_CFG1 Register Value.
5150 * The microcode will set the SCSI_CFG1 register using this value
5151 * after it is started below.
5153 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);
5156 * Set MEM_CFG Microcode Default Value
5158 * The microcode will set the MEM_CFG register using this value
5159 * after it is started below.
5161 * MEM_CFG may be accessed as a word or byte, but only bits 0-7
5164 * ASC-38C0800 has 16KB internal memory.
5166 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
5167 BIOS_EN | RAM_SZ_16KB);
5170 * Set SEL_MASK Microcode Default Value
5172 * The microcode will set the SEL_MASK register using this value
5173 * after it is started below.
5175 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
5176 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
5178 AdvBuildCarrierFreelist(asc_dvc);
5181 * Set-up the Host->RISC Initiator Command Queue (ICQ).
5184 asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
5185 if (!asc_dvc->icq_sp) {
5186 ASC_DBG(0, "Failed to get ICQ carrier\n");
5187 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
5192 * Set RISC ICQ physical address start value.
5193 * carr_pa is LE, must be native before write
5195 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
5198 * Set-up the RISC->Host Initiator Response Queue (IRQ).
5200 asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
5201 if (!asc_dvc->irq_sp) {
5202 ASC_DBG(0, "Failed to get IRQ carrier\n");
5203 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
5208 * Set RISC IRQ physical address start value.
5210 * carr_pa is LE, must be native before write *
5212 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
5213 asc_dvc->carr_pending_cnt = 0;
5215 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
5216 (ADV_INTR_ENABLE_HOST_INTR |
5217 ADV_INTR_ENABLE_GLOBAL_INTR));
5219 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
5220 AdvWriteWordRegister(iop_base, IOPW_PC, word);
5222 /* finally, finally, gentlemen, start your engine */
5223 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
5226 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
5227 * Resets should be performed. The RISC has to be running
5228 * to issue a SCSI Bus Reset.
5230 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) {
5232 * If the BIOS Signature is present in memory, restore the
5233 * BIOS Handshake Configuration Table and do not perform
5236 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] ==
5239 * Restore per TID negotiated values.
5241 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
5242 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
5243 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE,
5245 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
5246 AdvWriteByteLram(iop_base,
5247 ASC_MC_NUMBER_OF_MAX_CMD + tid,
5251 if (AdvResetSB(asc_dvc) != ADV_TRUE) {
5252 warn_code = ASC_WARN_BUSRESET_ERROR;
5261 * Initialize the ASC-38C1600.
5263 * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR.
5265 * For a non-fatal error return a warning code. If there are no warnings
5266 * then 0 is returned.
5268 * Needed after initialization for error recovery.
5270 static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
5272 const struct firmware *fw;
5273 const char fwname[] = "advansys/38C1600.bin";
5274 AdvPortAddr iop_base;
5282 unsigned long chksum;
5286 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */
5287 ushort wdtr_able, sdtr_able, ppr_able, tagqng_able;
5288 uchar max_cmd[ASC_MAX_TID + 1];
5290 /* If there is already an error, don't continue. */
5291 if (asc_dvc->err_code != 0) {
5296 * The caller must set 'chip_type' to ADV_CHIP_ASC38C1600.
5298 if (asc_dvc->chip_type != ADV_CHIP_ASC38C1600) {
5299 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE;
5304 iop_base = asc_dvc->iop_base;
5307 * Save the RISC memory BIOS region before writing the microcode.
5308 * The BIOS may already be loaded and using its RISC LRAM region
5309 * so its region must be saved and restored.
5311 * Note: This code makes the assumption, which is currently true,
5312 * that a chip reset does not clear RISC LRAM.
5314 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
5315 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
5320 * Save current per TID negotiated values.
5322 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
5323 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
5324 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
5325 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
5326 for (tid = 0; tid <= ASC_MAX_TID; tid++) {
5327 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
5332 * RAM BIST (Built-In Self Test)
5334 * Address : I/O base + offset 0x38h register (byte).
5335 * Function: Bit 7-6(RW) : RAM mode
5336 * Normal Mode : 0x00
5337 * Pre-test Mode : 0x40
5338 * RAM Test Mode : 0x80
5340 * Bit 4(RO) : Done bit
5341 * Bit 3-0(RO) : Status
5343 * Int_RAM Error : 0x04
5348 * Note: RAM BIST code should be put right here, before loading the
5349 * microcode and after saving the RISC memory BIOS region.
5355 * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds.
5356 * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return
5357 * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset
5358 * to NORMAL_MODE, return an error too.
5360 for (i = 0; i < 2; i++) {
5361 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE);
5362 mdelay(10); /* Wait for 10ms before reading back. */
5363 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
5364 if ((byte & RAM_TEST_DONE) == 0
5365 || (byte & 0x0F) != PRE_TEST_VALUE) {
5366 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST;
5370 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
5371 mdelay(10); /* Wait for 10ms before reading back. */
5372 if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST)
5374 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST;
5380 * LRAM Test - It takes about 1.5 ms to run through the test.
5382 * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds.
5383 * If Done bit not set or Status not 0, save register byte, set the
5384 * err_code, and return an error.
5386 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE);
5387 mdelay(10); /* Wait for 10ms before checking status. */
5389 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
5390 if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) {
5391 /* Get here if Done bit not set or Status not 0. */
5392 asc_dvc->bist_err_code = byte; /* for BIOS display message */
5393 asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST;
5397 /* We need to reset back to normal mode after LRAM test passes. */
5398 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
5400 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev);
5402 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
5404 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
5408 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
5410 release_firmware(fw);
5411 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
5414 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
5415 (fw->data[1] << 8) | fw->data[0];
5416 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4],
5417 fw->size - 4, ADV_38C1600_MEMSIZE,
5419 release_firmware(fw);
5420 if (asc_dvc->err_code)
5424 * Restore the RISC memory BIOS region.
5426 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) {
5427 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i),
5432 * Calculate and write the microcode code checksum to the microcode
5433 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
5435 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
5436 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
5438 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
5439 for (word = begin_addr; word < end_addr; word += 2) {
5440 code_sum += AdvReadWordAutoIncLram(iop_base);
5442 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
5445 * Read microcode version and date.
5447 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE,
5448 asc_dvc->cfg->mcode_date);
5449 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM,
5450 asc_dvc->cfg->mcode_version);
5453 * Set the chip type to indicate the ASC38C1600.
5455 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C1600);
5458 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
5459 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
5460 * cable detection and then we are able to read C_DET[3:0].
5462 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
5463 * Microcode Default Value' section below.
5465 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
5466 AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1,
5467 scsi_cfg1 | DIS_TERM_DRV);
5470 * If the PCI Configuration Command Register "Parity Error Response
5471 * Control" Bit was clear (0), then set the microcode variable
5472 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
5473 * to ignore DMA parity errors.
5475 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) {
5476 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
5477 word |= CONTROL_FLAG_IGNORE_PERR;
5478 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
5482 * If the BIOS control flag AIPP (Asynchronous Information
5483 * Phase Protection) disable bit is not set, then set the firmware
5484 * 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to enable
5485 * AIPP checking and encoding.
5487 if ((asc_dvc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0) {
5488 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
5489 word |= CONTROL_FLAG_ENABLE_AIPP;
5490 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
5494 * For ASC-38C1600 use DMA_CFG0 default values: FIFO_THRESH_80B [6:4],
5495 * and START_CTL_TH [3:2].
5497 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
5498 FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM);
5501 * Microcode operating variables for WDTR, SDTR, and command tag
5502 * queuing will be set in slave_configure() based on what a
5503 * device reports it is capable of in Inquiry byte 7.
5505 * If SCSI Bus Resets have been disabled, then directly set
5506 * SDTR and WDTR from the EEPROM configuration. This will allow
5507 * the BIOS and warm boot to work without a SCSI bus hang on
5508 * the Inquiry caused by host and target mismatched DTR values.
5509 * Without the SCSI Bus Reset, before an Inquiry a device can't
5510 * be assumed to be in Asynchronous, Narrow mode.
5512 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) {
5513 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE,
5514 asc_dvc->wdtr_able);
5515 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE,
5516 asc_dvc->sdtr_able);
5520 * Set microcode operating variables for DISC and SDTR_SPEED1,
5521 * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM
5522 * configuration values.
5524 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
5525 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
5526 * without determining here whether the device supports SDTR.
5528 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE,
5529 asc_dvc->cfg->disc_enable);
5530 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1);
5531 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2);
5532 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3);
5533 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4);
5536 * Set SCSI_CFG0 Microcode Default Value.
5538 * The microcode will set the SCSI_CFG0 register using this value
5539 * after it is started below.
5541 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
5542 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
5543 asc_dvc->chip_scsi_id);
5546 * Calculate SCSI_CFG1 Microcode Default Value.
5548 * The microcode will set the SCSI_CFG1 register using this value
5549 * after it is started below.
5551 * Each ASC-38C1600 function has only two cable detect bits.
5552 * The bus mode override bits are in IOPB_SOFT_OVER_WR.
5554 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
5557 * If the cable is reversed all of the SCSI_CTRL register signals
5558 * will be set. Check for and return an error if this condition is
5561 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) {
5562 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
5567 * Each ASC-38C1600 function has two connectors. Only an HVD device
5568 * can not be connected to either connector. An LVD device or SE device
5569 * may be connected to either connecor. If an SE device is connected,
5570 * then at most Ultra speed (20 Mhz) can be used on both connectors.
5572 * If an HVD device is attached, return an error.
5574 if (scsi_cfg1 & HVD) {
5575 asc_dvc->err_code |= ASC_IERR_HVD_DEVICE;
5580 * Each function in the ASC-38C1600 uses only the SE cable detect and
5581 * termination because there are two connectors for each function. Each
5582 * function may use either LVD or SE mode. Corresponding the SE automatic
5583 * termination control EEPROM bits are used for each function. Each
5584 * function has its own EEPROM. If SE automatic control is enabled for
5585 * the function, then set the termination value based on a table listed
5588 * If manual termination is specified in the EEPROM for the function,
5589 * then 'termination' was set-up in AscInitFrom38C1600EEPROM() and is
5590 * ready to be 'ored' into SCSI_CFG1.
5592 if ((asc_dvc->cfg->termination & TERM_SE) == 0) {
5593 struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc);
5594 /* SE automatic termination control is enabled. */
5595 switch (scsi_cfg1 & C_DET_SE) {
5596 /* TERM_SE_HI: on, TERM_SE_LO: on */
5600 asc_dvc->cfg->termination |= TERM_SE;
5604 if (PCI_FUNC(pdev->devfn) == 0) {
5605 /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */
5607 /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */
5608 asc_dvc->cfg->termination |= TERM_SE_HI;
5615 * Clear any set TERM_SE bits.
5617 scsi_cfg1 &= ~TERM_SE;
5620 * Invert the TERM_SE bits and then set 'scsi_cfg1'.
5622 scsi_cfg1 |= (~asc_dvc->cfg->termination & TERM_SE);
5625 * Clear Big Endian and Terminator Polarity bits and set possibly
5626 * modified termination control bits in the Microcode SCSI_CFG1
5629 * Big Endian bit is not used even on big endian machines.
5631 scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL);
5634 * Set SCSI_CFG1 Microcode Default Value
5636 * Set possibly modified termination control bits in the Microcode
5637 * SCSI_CFG1 Register Value.
5639 * The microcode will set the SCSI_CFG1 register using this value
5640 * after it is started below.
5642 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);
5645 * Set MEM_CFG Microcode Default Value
5647 * The microcode will set the MEM_CFG register using this value
5648 * after it is started below.
5650 * MEM_CFG may be accessed as a word or byte, but only bits 0-7
5653 * ASC-38C1600 has 32KB internal memory.
5655 * XXX - Since ASC38C1600 Rev.3 has a Local RAM failure issue, we come
5656 * out a special 16K Adv Library and Microcode version. After the issue
5657 * resolved, we should turn back to the 32K support. Both a_condor.h and
5658 * mcode.sas files also need to be updated.
5660 * AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
5661 * BIOS_EN | RAM_SZ_32KB);
5663 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
5664 BIOS_EN | RAM_SZ_16KB);
5667 * Set SEL_MASK Microcode Default Value
5669 * The microcode will set the SEL_MASK register using this value
5670 * after it is started below.
5672 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
5673 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
5675 AdvBuildCarrierFreelist(asc_dvc);
5678 * Set-up the Host->RISC Initiator Command Queue (ICQ).
5680 asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
5681 if (!asc_dvc->icq_sp) {
5682 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
5687 * Set RISC ICQ physical address start value. Initialize the
5688 * COMMA register to the same value otherwise the RISC will
5689 * prematurely detect a command is available.
5691 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
5692 AdvWriteDWordRegister(iop_base, IOPDW_COMMA,
5693 le32_to_cpu(asc_dvc->icq_sp->carr_pa));
5696 * Set-up the RISC->Host Initiator Response Queue (IRQ).
5698 asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
5699 if (!asc_dvc->irq_sp) {
5700 asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
5705 * Set RISC IRQ physical address start value.
5707 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
5708 asc_dvc->carr_pending_cnt = 0;
5710 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
5711 (ADV_INTR_ENABLE_HOST_INTR |
5712 ADV_INTR_ENABLE_GLOBAL_INTR));
5713 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
5714 AdvWriteWordRegister(iop_base, IOPW_PC, word);
5716 /* finally, finally, gentlemen, start your engine */
5717 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
5720 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
5721 * Resets should be performed. The RISC has to be running
5722 * to issue a SCSI Bus Reset.
5724 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) {
5726 * If the BIOS Signature is present in memory, restore the
5727 * per TID microcode operating variables.
5729 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] ==
5732 * Restore per TID negotiated values.
5734 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
5735 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
5736 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
5737 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE,
5739 for (tid = 0; tid <= ASC_MAX_TID; tid++) {
5740 AdvWriteByteLram(iop_base,
5741 ASC_MC_NUMBER_OF_MAX_CMD + tid,
5745 if (AdvResetSB(asc_dvc) != ADV_TRUE) {
5746 warn_code = ASC_WARN_BUSRESET_ERROR;
5755 * Reset chip and SCSI Bus.
5758 * ADV_TRUE(1) - Chip re-initialization and SCSI Bus Reset successful.
5759 * ADV_FALSE(0) - Chip re-initialization and SCSI Bus Reset failure.
5761 static int AdvResetChipAndSB(ADV_DVC_VAR *asc_dvc)
5764 ushort wdtr_able, sdtr_able, tagqng_able;
5765 ushort ppr_able = 0;
5766 uchar tid, max_cmd[ADV_MAX_TID + 1];
5767 AdvPortAddr iop_base;
5770 iop_base = asc_dvc->iop_base;
5773 * Save current per TID negotiated values.
5775 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
5776 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
5777 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) {
5778 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
5780 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
5781 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
5782 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
5787 * Force the AdvInitAsc3550/38C0800Driver() function to
5788 * perform a SCSI Bus Reset by clearing the BIOS signature word.
5789 * The initialization functions assumes a SCSI Bus Reset is not
5790 * needed if the BIOS signature word is present.
5792 AdvReadWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig);
5793 AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, 0);
5796 * Stop chip and reset it.
5798 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_STOP);
5799 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET);
5801 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG,
5802 ADV_CTRL_REG_CMD_WR_IO_REG);
5805 * Reset Adv Library error code, if any, and try
5806 * re-initializing the chip.
5808 asc_dvc->err_code = 0;
5809 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) {
5810 status = AdvInitAsc38C1600Driver(asc_dvc);
5811 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) {
5812 status = AdvInitAsc38C0800Driver(asc_dvc);
5814 status = AdvInitAsc3550Driver(asc_dvc);
5817 /* Translate initialization return value to status value. */
5825 * Restore the BIOS signature word.
5827 AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig);
5830 * Restore per TID negotiated values.
5832 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
5833 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
5834 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) {
5835 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
5837 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
5838 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
5839 AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
5847 * adv_async_callback() - Adv Library asynchronous event callback function.
5849 static void adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code)
5852 case ADV_ASYNC_SCSI_BUS_RESET_DET:
5854 * The firmware detected a SCSI Bus reset.
5856 ASC_DBG(0, "ADV_ASYNC_SCSI_BUS_RESET_DET\n");
5859 case ADV_ASYNC_RDMA_FAILURE:
5861 * Handle RDMA failure by resetting the SCSI Bus and
5862 * possibly the chip if it is unresponsive. Log the error
5863 * with a unique code.
5865 ASC_DBG(0, "ADV_ASYNC_RDMA_FAILURE\n");
5866 AdvResetChipAndSB(adv_dvc_varp);
5869 case ADV_HOST_SCSI_BUS_RESET:
5871 * Host generated SCSI bus reset occurred.
5873 ASC_DBG(0, "ADV_HOST_SCSI_BUS_RESET\n");
5877 ASC_DBG(0, "unknown code 0x%x\n", code);
5883 * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR().
5885 * Callback function for the Wide SCSI Adv Library.
5887 static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
5889 struct asc_board *boardp = adv_dvc_varp->drv_ptr;
5891 adv_sgblk_t *sgblkp;
5892 struct scsi_cmnd *scp;
5894 dma_addr_t sense_addr;
5896 ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n",
5897 adv_dvc_varp, scsiqp);
5898 ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
5901 * Get the adv_req_t structure for the command that has been
5902 * completed. The adv_req_t structure actually contains the
5903 * completed ADV_SCSI_REQ_Q structure.
5905 scp = scsi_host_find_tag(boardp->shost, scsiqp->srb_tag);
5907 ASC_DBG(1, "scp 0x%p\n", scp);
5910 ("adv_isr_callback: scp is NULL; adv_req_t dropped.\n");
5913 ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
5915 reqp = (adv_req_t *)scp->host_scribble;
5916 ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp);
5918 ASC_PRINT("adv_isr_callback: reqp is NULL\n");
5922 * Remove backreferences to avoid duplicate
5923 * command completions.
5925 scp->host_scribble = NULL;
5928 ASC_STATS(boardp->shost, callback);
5929 ASC_DBG(1, "shost 0x%p\n", boardp->shost);
5931 sense_addr = le32_to_cpu(scsiqp->sense_addr);
5932 dma_unmap_single(boardp->dev, sense_addr,
5933 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
5936 * 'done_status' contains the command's ending status.
5939 switch (scsiqp->done_status) {
5941 ASC_DBG(2, "QD_NO_ERROR\n");
5944 * Check for an underrun condition.
5946 * If there was no error and an underrun condition, then
5947 * then return the number of underrun bytes.
5949 resid_cnt = le32_to_cpu(scsiqp->data_cnt);
5950 if (scsi_bufflen(scp) != 0 && resid_cnt != 0 &&
5951 resid_cnt <= scsi_bufflen(scp)) {
5952 ASC_DBG(1, "underrun condition %lu bytes\n",
5954 scsi_set_resid(scp, resid_cnt);
5959 ASC_DBG(2, "QD_WITH_ERROR\n");
5960 switch (scsiqp->host_status) {
5961 case QHSTA_NO_ERROR:
5962 set_status_byte(scp, scsiqp->scsi_status);
5963 if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) {
5964 ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n");
5965 ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
5966 SCSI_SENSE_BUFFERSIZE);
5967 set_driver_byte(scp, DRIVER_SENSE);
5972 /* Some other QHSTA error occurred. */
5973 ASC_DBG(1, "host_status 0x%x\n", scsiqp->host_status);
5974 set_host_byte(scp, DID_BAD_TARGET);
5979 case QD_ABORTED_BY_HOST:
5980 ASC_DBG(1, "QD_ABORTED_BY_HOST\n");
5981 set_status_byte(scp, scsiqp->scsi_status);
5982 set_host_byte(scp, DID_ABORT);
5986 ASC_DBG(1, "done_status 0x%x\n", scsiqp->done_status);
5987 set_status_byte(scp, scsiqp->scsi_status);
5988 set_host_byte(scp, DID_ERROR);
5993 * If the 'init_tidmask' bit isn't already set for the target and the
5994 * current request finished normally, then set the bit for the target
5995 * to indicate that a device is present.
5997 if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 &&
5998 scsiqp->done_status == QD_NO_ERROR &&
5999 scsiqp->host_status == QHSTA_NO_ERROR) {
6000 boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id);
6006 * Free all 'adv_sgblk_t' structures allocated for the request.
6008 while ((sgblkp = reqp->sgblkp) != NULL) {
6009 /* Remove 'sgblkp' from the request list. */
6010 reqp->sgblkp = sgblkp->next_sgblkp;
6012 dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
6016 ASC_DBG(1, "done\n");
6020 * Adv Library Interrupt Service Routine
6022 * This function is called by a driver's interrupt service routine.
6023 * The function disables and re-enables interrupts.
6025 * When a microcode idle command is completed, the ADV_DVC_VAR
6026 * 'idle_cmd_done' field is set to ADV_TRUE.
6028 * Note: AdvISR() can be called when interrupts are disabled or even
6029 * when there is no hardware interrupt condition present. It will
6030 * always check for completed idle commands and microcode requests.
6031 * This is an important feature that shouldn't be changed because it
6032 * allows commands to be completed from polling mode loops.
6035 * ADV_TRUE(1) - interrupt was pending
6036 * ADV_FALSE(0) - no interrupt was pending
6038 static int AdvISR(ADV_DVC_VAR *asc_dvc)
6040 AdvPortAddr iop_base;
6042 ADV_CARR_T *free_carrp;
6043 __le32 irq_next_vpa;
6044 ADV_SCSI_REQ_Q *scsiq;
6047 iop_base = asc_dvc->iop_base;
6049 /* Reading the register clears the interrupt. */
6050 int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG);
6052 if ((int_stat & (ADV_INTR_STATUS_INTRA | ADV_INTR_STATUS_INTRB |
6053 ADV_INTR_STATUS_INTRC)) == 0) {
6058 * Notify the driver of an asynchronous microcode condition by
6059 * calling the adv_async_callback function. The function
6060 * is passed the microcode ASC_MC_INTRB_CODE byte value.
6062 if (int_stat & ADV_INTR_STATUS_INTRB) {
6065 AdvReadByteLram(iop_base, ASC_MC_INTRB_CODE, intrb_code);
6067 if (asc_dvc->chip_type == ADV_CHIP_ASC3550 ||
6068 asc_dvc->chip_type == ADV_CHIP_ASC38C0800) {
6069 if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE &&
6070 asc_dvc->carr_pending_cnt != 0) {
6071 AdvWriteByteRegister(iop_base, IOPB_TICKLE,
6073 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) {
6074 AdvWriteByteRegister(iop_base,
6081 adv_async_callback(asc_dvc, intrb_code);
6085 * Check if the IRQ stopper carrier contains a completed request.
6087 while (((irq_next_vpa =
6088 le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ADV_RQ_DONE) != 0) {
6090 * Get a pointer to the newly completed ADV_SCSI_REQ_Q structure.
6091 * The RISC will have set 'areq_vpa' to a virtual address.
6093 * The firmware will have copied the ADV_SCSI_REQ_Q.scsiq_ptr
6094 * field to the carrier ADV_CARR_T.areq_vpa field. The conversion
6095 * below complements the conversion of ADV_SCSI_REQ_Q.scsiq_ptr'
6096 * in AdvExeScsiQueue().
6098 u32 pa_offset = le32_to_cpu(asc_dvc->irq_sp->areq_vpa);
6099 ASC_DBG(1, "irq_sp %p areq_vpa %u\n",
6100 asc_dvc->irq_sp, pa_offset);
6101 reqp = adv_get_reqp(asc_dvc, pa_offset);
6102 scsiq = &reqp->scsi_req_q;
6105 * Request finished with good status and the queue was not
6106 * DMAed to host memory by the firmware. Set all status fields
6107 * to indicate good status.
6109 if ((irq_next_vpa & ADV_RQ_GOOD) != 0) {
6110 scsiq->done_status = QD_NO_ERROR;
6111 scsiq->host_status = scsiq->scsi_status = 0;
6112 scsiq->data_cnt = 0L;
6116 * Advance the stopper pointer to the next carrier
6117 * ignoring the lower four bits. Free the previous
6120 free_carrp = asc_dvc->irq_sp;
6121 asc_dvc->irq_sp = adv_get_carrier(asc_dvc,
6122 ADV_GET_CARRP(irq_next_vpa));
6124 free_carrp->next_vpa = asc_dvc->carr_freelist->carr_va;
6125 asc_dvc->carr_freelist = free_carrp;
6126 asc_dvc->carr_pending_cnt--;
6129 * Clear request microcode control flag.
6134 * Notify the driver of the completed request by passing
6135 * the ADV_SCSI_REQ_Q pointer to its callback function.
6137 adv_isr_callback(asc_dvc, scsiq);
6139 * Note: After the driver callback function is called, 'scsiq'
6140 * can no longer be referenced.
6142 * Fall through and continue processing other completed
6149 static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code)
6151 if (asc_dvc->err_code == 0) {
6152 asc_dvc->err_code = err_code;
6153 AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W,
6159 static void AscAckInterrupt(PortAddr iop_base)
6167 risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B);
6168 if (loop++ > 0x7FFF) {
6171 } while ((risc_flag & ASC_RISC_FLAG_GEN_INT) != 0);
6173 AscReadLramByte(iop_base,
6174 ASCV_HOST_FLAG_B) & (~ASC_HOST_FLAG_ACK_INT);
6175 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B,
6176 (uchar)(host_flag | ASC_HOST_FLAG_ACK_INT));
6177 AscSetChipStatus(iop_base, CIW_INT_ACK);
6179 while (AscGetChipStatus(iop_base) & CSW_INT_PENDING) {
6180 AscSetChipStatus(iop_base, CIW_INT_ACK);
6185 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
6188 static uchar AscGetSynPeriodIndex(ASC_DVC_VAR *asc_dvc, uchar syn_time)
6190 const uchar *period_table;
6195 period_table = asc_dvc->sdtr_period_tbl;
6196 max_index = (int)asc_dvc->max_sdtr_index;
6197 min_index = (int)asc_dvc->min_sdtr_index;
6198 if ((syn_time <= period_table[max_index])) {
6199 for (i = min_index; i < (max_index - 1); i++) {
6200 if (syn_time <= period_table[i]) {
6204 return (uchar)max_index;
6206 return (uchar)(max_index + 1);
6211 AscMsgOutSDTR(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar sdtr_offset)
6213 PortAddr iop_base = asc_dvc->iop_base;
6214 uchar sdtr_period_index = AscGetSynPeriodIndex(asc_dvc, sdtr_period);
6215 EXT_MSG sdtr_buf = {
6216 .msg_type = EXTENDED_MESSAGE,
6217 .msg_len = MS_SDTR_LEN,
6218 .msg_req = EXTENDED_SDTR,
6219 .xfer_period = sdtr_period,
6220 .req_ack_offset = sdtr_offset,
6222 sdtr_offset &= ASC_SYN_MAX_OFFSET;
6224 if (sdtr_period_index <= asc_dvc->max_sdtr_index) {
6225 AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG,
6227 sizeof(EXT_MSG) >> 1);
6228 return ((sdtr_period_index << 4) | sdtr_offset);
6230 sdtr_buf.req_ack_offset = 0;
6231 AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG,
6233 sizeof(EXT_MSG) >> 1);
6239 AscCalSDTRData(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar syn_offset)
6242 uchar sdtr_period_ix;
6244 sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period);
6245 if (sdtr_period_ix > asc_dvc->max_sdtr_index)
6247 byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET);
6251 static bool AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data)
6253 ASC_SCSI_BIT_ID_TYPE org_id;
6257 AscSetBank(iop_base, 1);
6258 org_id = AscReadChipDvcID(iop_base);
6259 for (i = 0; i <= ASC_MAX_TID; i++) {
6260 if (org_id == (0x01 << i))
6263 org_id = (ASC_SCSI_BIT_ID_TYPE) i;
6264 AscWriteChipDvcID(iop_base, id);
6265 if (AscReadChipDvcID(iop_base) == (0x01 << id)) {
6266 AscSetBank(iop_base, 0);
6267 AscSetChipSyn(iop_base, sdtr_data);
6268 if (AscGetChipSyn(iop_base) != sdtr_data) {
6274 AscSetBank(iop_base, 1);
6275 AscWriteChipDvcID(iop_base, org_id);
6276 AscSetBank(iop_base, 0);
6280 static void AscSetChipSDTR(PortAddr iop_base, uchar sdtr_data, uchar tid_no)
6282 AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data);
6283 AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data);
6286 static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
6292 ushort int_halt_code;
6293 ASC_SCSI_BIT_ID_TYPE scsi_busy;
6294 ASC_SCSI_BIT_ID_TYPE target_id;
6301 uchar q_cntl, tid_no;
6305 struct asc_board *boardp;
6307 BUG_ON(!asc_dvc->drv_ptr);
6308 boardp = asc_dvc->drv_ptr;
6310 iop_base = asc_dvc->iop_base;
6311 int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W);
6313 halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B);
6314 halt_q_addr = ASC_QNO_TO_QADDR(halt_qp);
6315 target_ix = AscReadLramByte(iop_base,
6316 (ushort)(halt_q_addr +
6317 (ushort)ASC_SCSIQ_B_TARGET_IX));
6318 q_cntl = AscReadLramByte(iop_base,
6319 (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL));
6320 tid_no = ASC_TIX_TO_TID(target_ix);
6321 target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no);
6322 if (asc_dvc->pci_fix_asyn_xfer & target_id) {
6323 asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB;
6327 if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX) {
6328 if (asc_dvc->pci_fix_asyn_xfer & target_id) {
6329 AscSetChipSDTR(iop_base, 0, tid_no);
6330 boardp->sdtr_data[tid_no] = 0;
6332 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6334 } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) {
6335 if (asc_dvc->pci_fix_asyn_xfer & target_id) {
6336 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
6337 boardp->sdtr_data[tid_no] = asyn_sdtr;
6339 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6341 } else if (int_halt_code == ASC_HALT_EXTMSG_IN) {
6342 AscMemWordCopyPtrFromLram(iop_base,
6345 sizeof(EXT_MSG) >> 1);
6347 if (ext_msg.msg_type == EXTENDED_MESSAGE &&
6348 ext_msg.msg_req == EXTENDED_SDTR &&
6349 ext_msg.msg_len == MS_SDTR_LEN) {
6351 if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) {
6353 sdtr_accept = false;
6354 ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET;
6356 if ((ext_msg.xfer_period <
6357 asc_dvc->sdtr_period_tbl[asc_dvc->min_sdtr_index])
6358 || (ext_msg.xfer_period >
6359 asc_dvc->sdtr_period_tbl[asc_dvc->
6361 sdtr_accept = false;
6362 ext_msg.xfer_period =
6363 asc_dvc->sdtr_period_tbl[asc_dvc->
6368 AscCalSDTRData(asc_dvc, ext_msg.xfer_period,
6369 ext_msg.req_ack_offset);
6370 if (sdtr_data == 0xFF) {
6372 q_cntl |= QC_MSG_OUT;
6373 asc_dvc->init_sdtr &= ~target_id;
6374 asc_dvc->sdtr_done &= ~target_id;
6375 AscSetChipSDTR(iop_base, asyn_sdtr,
6377 boardp->sdtr_data[tid_no] = asyn_sdtr;
6380 if (ext_msg.req_ack_offset == 0) {
6382 q_cntl &= ~QC_MSG_OUT;
6383 asc_dvc->init_sdtr &= ~target_id;
6384 asc_dvc->sdtr_done &= ~target_id;
6385 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
6387 if (sdtr_accept && (q_cntl & QC_MSG_OUT)) {
6388 q_cntl &= ~QC_MSG_OUT;
6389 asc_dvc->sdtr_done |= target_id;
6390 asc_dvc->init_sdtr |= target_id;
6391 asc_dvc->pci_fix_asyn_xfer &=
6394 AscCalSDTRData(asc_dvc,
6395 ext_msg.xfer_period,
6398 AscSetChipSDTR(iop_base, sdtr_data,
6400 boardp->sdtr_data[tid_no] = sdtr_data;
6402 q_cntl |= QC_MSG_OUT;
6403 AscMsgOutSDTR(asc_dvc,
6404 ext_msg.xfer_period,
6405 ext_msg.req_ack_offset);
6406 asc_dvc->pci_fix_asyn_xfer &=
6409 AscCalSDTRData(asc_dvc,
6410 ext_msg.xfer_period,
6413 AscSetChipSDTR(iop_base, sdtr_data,
6415 boardp->sdtr_data[tid_no] = sdtr_data;
6416 asc_dvc->sdtr_done |= target_id;
6417 asc_dvc->init_sdtr |= target_id;
6421 AscWriteLramByte(iop_base,
6422 (ushort)(halt_q_addr +
6423 (ushort)ASC_SCSIQ_B_CNTL),
6425 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6427 } else if (ext_msg.msg_type == EXTENDED_MESSAGE &&
6428 ext_msg.msg_req == EXTENDED_WDTR &&
6429 ext_msg.msg_len == MS_WDTR_LEN) {
6431 ext_msg.wdtr_width = 0;
6432 AscMemWordCopyPtrToLram(iop_base,
6435 sizeof(EXT_MSG) >> 1);
6436 q_cntl |= QC_MSG_OUT;
6437 AscWriteLramByte(iop_base,
6438 (ushort)(halt_q_addr +
6439 (ushort)ASC_SCSIQ_B_CNTL),
6441 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6445 ext_msg.msg_type = MESSAGE_REJECT;
6446 AscMemWordCopyPtrToLram(iop_base,
6449 sizeof(EXT_MSG) >> 1);
6450 q_cntl |= QC_MSG_OUT;
6451 AscWriteLramByte(iop_base,
6452 (ushort)(halt_q_addr +
6453 (ushort)ASC_SCSIQ_B_CNTL),
6455 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6458 } else if (int_halt_code == ASC_HALT_CHK_CONDITION) {
6460 q_cntl |= QC_REQ_SENSE;
6462 if ((asc_dvc->init_sdtr & target_id) != 0) {
6464 asc_dvc->sdtr_done &= ~target_id;
6466 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
6467 q_cntl |= QC_MSG_OUT;
6468 AscMsgOutSDTR(asc_dvc,
6470 sdtr_period_tbl[(sdtr_data >> 4) &
6474 (uchar)(sdtr_data & (uchar)
6475 ASC_SYN_MAX_OFFSET));
6478 AscWriteLramByte(iop_base,
6479 (ushort)(halt_q_addr +
6480 (ushort)ASC_SCSIQ_B_CNTL), q_cntl);
6482 tag_code = AscReadLramByte(iop_base,
6483 (ushort)(halt_q_addr + (ushort)
6484 ASC_SCSIQ_B_TAG_CODE));
6486 if ((asc_dvc->pci_fix_asyn_xfer & target_id)
6487 && !(asc_dvc->pci_fix_asyn_xfer_always & target_id)
6490 tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT
6491 | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX);
6494 AscWriteLramByte(iop_base,
6495 (ushort)(halt_q_addr +
6496 (ushort)ASC_SCSIQ_B_TAG_CODE),
6499 q_status = AscReadLramByte(iop_base,
6500 (ushort)(halt_q_addr + (ushort)
6501 ASC_SCSIQ_B_STATUS));
6502 q_status |= (QS_READY | QS_BUSY);
6503 AscWriteLramByte(iop_base,
6504 (ushort)(halt_q_addr +
6505 (ushort)ASC_SCSIQ_B_STATUS),
6508 scsi_busy = AscReadLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B);
6509 scsi_busy &= ~target_id;
6510 AscWriteLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B, scsi_busy);
6512 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6514 } else if (int_halt_code == ASC_HALT_SDTR_REJECTED) {
6516 AscMemWordCopyPtrFromLram(iop_base,
6519 sizeof(EXT_MSG) >> 1);
6521 if ((out_msg.msg_type == EXTENDED_MESSAGE) &&
6522 (out_msg.msg_len == MS_SDTR_LEN) &&
6523 (out_msg.msg_req == EXTENDED_SDTR)) {
6525 asc_dvc->init_sdtr &= ~target_id;
6526 asc_dvc->sdtr_done &= ~target_id;
6527 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
6528 boardp->sdtr_data[tid_no] = asyn_sdtr;
6530 q_cntl &= ~QC_MSG_OUT;
6531 AscWriteLramByte(iop_base,
6532 (ushort)(halt_q_addr +
6533 (ushort)ASC_SCSIQ_B_CNTL), q_cntl);
6534 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6536 } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) {
6538 scsi_status = AscReadLramByte(iop_base,
6539 (ushort)((ushort)halt_q_addr +
6541 ASC_SCSIQ_SCSI_STATUS));
6543 AscReadLramByte(iop_base,
6544 (ushort)((ushort)ASC_QADR_BEG +
6545 (ushort)target_ix));
6546 if ((cur_dvc_qng > 0) && (asc_dvc->cur_dvc_qng[tid_no] > 0)) {
6548 scsi_busy = AscReadLramByte(iop_base,
6549 (ushort)ASCV_SCSIBUSY_B);
6550 scsi_busy |= target_id;
6551 AscWriteLramByte(iop_base,
6552 (ushort)ASCV_SCSIBUSY_B, scsi_busy);
6553 asc_dvc->queue_full_or_busy |= target_id;
6555 if (scsi_status == SAM_STAT_TASK_SET_FULL) {
6556 if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) {
6558 asc_dvc->max_dvc_qng[tid_no] =
6561 AscWriteLramByte(iop_base,
6563 ASCV_MAX_DVC_QNG_BEG
6569 * Set the device queue depth to the
6570 * number of active requests when the
6571 * QUEUE FULL condition was encountered.
6573 boardp->queue_full |= target_id;
6574 boardp->queue_full_cnt[tid_no] =
6579 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
6587 * DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
6589 * Calling/Exit State:
6593 * Input an ASC_QDONE_INFO structure from the chip
6596 DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
6601 AscSetChipLramAddr(iop_base, s_addr);
6602 for (i = 0; i < 2 * words; i += 2) {
6606 word = inpw(iop_base + IOP_RAM_DATA);
6607 inbuf[i] = word & 0xff;
6608 inbuf[i + 1] = (word >> 8) & 0xff;
6610 ASC_DBG_PRT_HEX(2, "DvcGetQinfo", inbuf, 2 * words);
6614 _AscCopyLramScsiDoneQ(PortAddr iop_base,
6616 ASC_QDONE_INFO *scsiq, unsigned int max_dma_count)
6621 DvcGetQinfo(iop_base,
6622 q_addr + ASC_SCSIQ_DONE_INFO_BEG,
6624 (sizeof(ASC_SCSIQ_2) + sizeof(ASC_SCSIQ_3)) / 2);
6626 _val = AscReadLramWord(iop_base,
6627 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS));
6628 scsiq->q_status = (uchar)_val;
6629 scsiq->q_no = (uchar)(_val >> 8);
6630 _val = AscReadLramWord(iop_base,
6631 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_CNTL));
6632 scsiq->cntl = (uchar)_val;
6633 sg_queue_cnt = (uchar)(_val >> 8);
6634 _val = AscReadLramWord(iop_base,
6636 (ushort)ASC_SCSIQ_B_SENSE_LEN));
6637 scsiq->sense_len = (uchar)_val;
6638 scsiq->extra_bytes = (uchar)(_val >> 8);
6641 * Read high word of remain bytes from alternate location.
6643 scsiq->remain_bytes = (((u32)AscReadLramWord(iop_base,
6646 ASC_SCSIQ_W_ALT_DC1)))
6649 * Read low word of remain bytes from original location.
6651 scsiq->remain_bytes += AscReadLramWord(iop_base,
6652 (ushort)(q_addr + (ushort)
6653 ASC_SCSIQ_DW_REMAIN_XFER_CNT));
6655 scsiq->remain_bytes &= max_dma_count;
6656 return sg_queue_cnt;
6660 * asc_isr_callback() - Second Level Interrupt Handler called by AscISR().
6662 * Interrupt callback function for the Narrow SCSI Asc Library.
6664 static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)
6666 struct asc_board *boardp = asc_dvc_varp->drv_ptr;
6668 struct scsi_cmnd *scp;
6670 ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep);
6671 ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep);
6674 * Decrease the srb_tag by 1 to find the SCSI command
6676 srb_tag = qdonep->d2.srb_tag - 1;
6677 scp = scsi_host_find_tag(boardp->shost, srb_tag);
6681 ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
6683 ASC_STATS(boardp->shost, callback);
6685 dma_unmap_single(boardp->dev, scp->SCp.dma_handle,
6686 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
6688 * 'qdonep' contains the command's ending status.
6691 switch (qdonep->d3.done_stat) {
6693 ASC_DBG(2, "QD_NO_ERROR\n");
6696 * Check for an underrun condition.
6698 * If there was no error and an underrun condition, then
6699 * return the number of underrun bytes.
6701 if (scsi_bufflen(scp) != 0 && qdonep->remain_bytes != 0 &&
6702 qdonep->remain_bytes <= scsi_bufflen(scp)) {
6703 ASC_DBG(1, "underrun condition %u bytes\n",
6704 (unsigned)qdonep->remain_bytes);
6705 scsi_set_resid(scp, qdonep->remain_bytes);
6710 ASC_DBG(2, "QD_WITH_ERROR\n");
6711 switch (qdonep->d3.host_stat) {
6712 case QHSTA_NO_ERROR:
6713 set_status_byte(scp, qdonep->d3.scsi_stat);
6714 if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) {
6715 ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n");
6716 ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
6717 SCSI_SENSE_BUFFERSIZE);
6718 set_driver_byte(scp, DRIVER_SENSE);
6723 /* QHSTA error occurred */
6724 ASC_DBG(1, "host_stat 0x%x\n", qdonep->d3.host_stat);
6725 set_host_byte(scp, DID_BAD_TARGET);
6730 case QD_ABORTED_BY_HOST:
6731 ASC_DBG(1, "QD_ABORTED_BY_HOST\n");
6732 set_status_byte(scp, qdonep->d3.scsi_stat);
6733 set_msg_byte(scp, qdonep->d3.scsi_msg);
6734 set_host_byte(scp, DID_ABORT);
6738 ASC_DBG(1, "done_stat 0x%x\n", qdonep->d3.done_stat);
6739 set_status_byte(scp, qdonep->d3.scsi_stat);
6740 set_msg_byte(scp, qdonep->d3.scsi_msg);
6741 set_host_byte(scp, DID_ERROR);
6746 * If the 'init_tidmask' bit isn't already set for the target and the
6747 * current request finished normally, then set the bit for the target
6748 * to indicate that a device is present.
6750 if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 &&
6751 qdonep->d3.done_stat == QD_NO_ERROR &&
6752 qdonep->d3.host_stat == QHSTA_NO_ERROR) {
6753 boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id);
6759 static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
6768 ASC_SCSI_BIT_ID_TYPE scsi_busy;
6769 ASC_SCSI_BIT_ID_TYPE target_id;
6773 uchar cur_target_qng;
6774 ASC_QDONE_INFO scsiq_buf;
6775 ASC_QDONE_INFO *scsiq;
6778 iop_base = asc_dvc->iop_base;
6780 scsiq = (ASC_QDONE_INFO *)&scsiq_buf;
6781 done_q_tail = (uchar)AscGetVarDoneQTail(iop_base);
6782 q_addr = ASC_QNO_TO_QADDR(done_q_tail);
6783 next_qp = AscReadLramByte(iop_base,
6784 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_FWD));
6785 if (next_qp != ASC_QLINK_END) {
6786 AscPutVarDoneQTail(iop_base, next_qp);
6787 q_addr = ASC_QNO_TO_QADDR(next_qp);
6788 sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq,
6789 asc_dvc->max_dma_count);
6790 AscWriteLramByte(iop_base,
6792 (ushort)ASC_SCSIQ_B_STATUS),
6794 q_status & (uchar)~(QS_READY |
6796 tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix);
6797 target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix);
6798 if ((scsiq->cntl & QC_SG_HEAD) != 0) {
6800 sg_list_qp = next_qp;
6801 for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) {
6802 sg_list_qp = AscReadLramByte(iop_base,
6806 sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp);
6807 if (sg_list_qp == ASC_QLINK_END) {
6808 AscSetLibErrorCode(asc_dvc,
6809 ASCQ_ERR_SG_Q_LINKS);
6810 scsiq->d3.done_stat = QD_WITH_ERROR;
6811 scsiq->d3.host_stat =
6812 QHSTA_D_QDONE_SG_LIST_CORRUPTED;
6813 goto FATAL_ERR_QDONE;
6815 AscWriteLramByte(iop_base,
6816 (ushort)(sg_q_addr + (ushort)
6817 ASC_SCSIQ_B_STATUS),
6820 n_q_used = sg_queue_cnt + 1;
6821 AscPutVarDoneQTail(iop_base, sg_list_qp);
6823 if (asc_dvc->queue_full_or_busy & target_id) {
6824 cur_target_qng = AscReadLramByte(iop_base,
6830 if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) {
6831 scsi_busy = AscReadLramByte(iop_base, (ushort)
6833 scsi_busy &= ~target_id;
6834 AscWriteLramByte(iop_base,
6835 (ushort)ASCV_SCSIBUSY_B,
6837 asc_dvc->queue_full_or_busy &= ~target_id;
6840 if (asc_dvc->cur_total_qng >= n_q_used) {
6841 asc_dvc->cur_total_qng -= n_q_used;
6842 if (asc_dvc->cur_dvc_qng[tid_no] != 0) {
6843 asc_dvc->cur_dvc_qng[tid_no]--;
6846 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG);
6847 scsiq->d3.done_stat = QD_WITH_ERROR;
6848 goto FATAL_ERR_QDONE;
6850 if ((scsiq->d2.srb_tag == 0UL) ||
6851 ((scsiq->q_status & QS_ABORTED) != 0)) {
6853 } else if (scsiq->q_status == QS_DONE) {
6855 * This is also curious.
6856 * false_overrun will _always_ be set to 'false'
6858 false_overrun = false;
6859 if (scsiq->extra_bytes != 0) {
6860 scsiq->remain_bytes += scsiq->extra_bytes;
6862 if (scsiq->d3.done_stat == QD_WITH_ERROR) {
6863 if (scsiq->d3.host_stat ==
6864 QHSTA_M_DATA_OVER_RUN) {
6866 cntl & (QC_DATA_IN | QC_DATA_OUT))
6868 scsiq->d3.done_stat =
6870 scsiq->d3.host_stat =
6872 } else if (false_overrun) {
6873 scsiq->d3.done_stat =
6875 scsiq->d3.host_stat =
6878 } else if (scsiq->d3.host_stat ==
6879 QHSTA_M_HUNG_REQ_SCSI_BUS_RESET) {
6880 AscStopChip(iop_base);
6881 AscSetChipControl(iop_base,
6882 (uchar)(CC_SCSI_RESET
6885 AscSetChipControl(iop_base, CC_HALT);
6886 AscSetChipStatus(iop_base,
6887 CIW_CLR_SCSI_RESET_INT);
6888 AscSetChipStatus(iop_base, 0);
6889 AscSetChipControl(iop_base, 0);
6892 if ((scsiq->cntl & QC_NO_CALLBACK) == 0) {
6893 asc_isr_callback(asc_dvc, scsiq);
6895 if ((AscReadLramByte(iop_base,
6896 (ushort)(q_addr + (ushort)
6899 asc_dvc->unit_not_ready &= ~target_id;
6900 if (scsiq->d3.done_stat != QD_NO_ERROR) {
6901 asc_dvc->start_motor &=
6908 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS);
6910 if ((scsiq->cntl & QC_NO_CALLBACK) == 0) {
6911 asc_isr_callback(asc_dvc, scsiq);
6919 static int AscISR(ASC_DVC_VAR *asc_dvc)
6921 ASC_CS_TYPE chipstat;
6923 ushort saved_ram_addr;
6925 uchar saved_ctrl_reg;
6930 iop_base = asc_dvc->iop_base;
6931 int_pending = ASC_FALSE;
6933 if (AscIsIntPending(iop_base) == 0)
6936 if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) {
6939 if (asc_dvc->in_critical_cnt != 0) {
6940 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL);
6943 if (asc_dvc->is_in_int) {
6944 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY);
6947 asc_dvc->is_in_int = true;
6948 ctrl_reg = AscGetChipControl(iop_base);
6949 saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET |
6950 CC_SINGLE_STEP | CC_DIAG | CC_TEST));
6951 chipstat = AscGetChipStatus(iop_base);
6952 if (chipstat & CSW_SCSI_RESET_LATCH) {
6953 if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) {
6955 int_pending = ASC_TRUE;
6956 asc_dvc->sdtr_done = 0;
6957 saved_ctrl_reg &= (uchar)(~CC_HALT);
6958 while ((AscGetChipStatus(iop_base) &
6959 CSW_SCSI_RESET_ACTIVE) && (i-- > 0)) {
6962 AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT));
6963 AscSetChipControl(iop_base, CC_HALT);
6964 AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT);
6965 AscSetChipStatus(iop_base, 0);
6966 chipstat = AscGetChipStatus(iop_base);
6969 saved_ram_addr = AscGetChipLramAddr(iop_base);
6970 host_flag = AscReadLramByte(iop_base,
6972 (uchar)(~ASC_HOST_FLAG_IN_ISR);
6973 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B,
6974 (uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR));
6975 if ((chipstat & CSW_INT_PENDING) || (int_pending)) {
6976 AscAckInterrupt(iop_base);
6977 int_pending = ASC_TRUE;
6978 if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
6979 AscIsrChipHalted(asc_dvc);
6980 saved_ctrl_reg &= (uchar)(~CC_HALT);
6982 if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) {
6984 AscIsrQDone(asc_dvc)) & 0x01) != 0) {
6989 AscIsrQDone(asc_dvc)) == 1) {
6992 } while (status == 0x11);
6994 if ((status & 0x80) != 0)
6995 int_pending = ASC_ERROR;
6998 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
6999 AscSetChipLramAddr(iop_base, saved_ram_addr);
7000 AscSetChipControl(iop_base, saved_ctrl_reg);
7001 asc_dvc->is_in_int = false;
7008 * Reset the host associated with the command 'scp'.
7010 * This function runs its own thread. Interrupts must be blocked but
7011 * sleeping is allowed and no locking other than for host structures is
7012 * required. Returns SUCCESS or FAILED.
7014 static int advansys_reset(struct scsi_cmnd *scp)
7016 struct Scsi_Host *shost = scp->device->host;
7017 struct asc_board *boardp = shost_priv(shost);
7018 unsigned long flags;
7022 ASC_DBG(1, "0x%p\n", scp);
7024 ASC_STATS(shost, reset);
7026 scmd_printk(KERN_INFO, scp, "SCSI host reset started...\n");
7028 if (ASC_NARROW_BOARD(boardp)) {
7029 ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var;
7031 /* Reset the chip and SCSI bus. */
7032 ASC_DBG(1, "before AscInitAsc1000Driver()\n");
7033 status = AscInitAsc1000Driver(asc_dvc);
7035 /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
7036 if (asc_dvc->err_code || !asc_dvc->overrun_dma) {
7037 scmd_printk(KERN_INFO, scp, "SCSI host reset error: "
7038 "0x%x, status: 0x%x\n", asc_dvc->err_code,
7041 } else if (status) {
7042 scmd_printk(KERN_INFO, scp, "SCSI host reset warning: "
7045 scmd_printk(KERN_INFO, scp, "SCSI host reset "
7049 ASC_DBG(1, "after AscInitAsc1000Driver()\n");
7052 * If the suggest reset bus flags are set, then reset the bus.
7053 * Otherwise only reset the device.
7055 ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var;
7058 * Reset the chip and SCSI bus.
7060 ASC_DBG(1, "before AdvResetChipAndSB()\n");
7061 switch (AdvResetChipAndSB(adv_dvc)) {
7063 scmd_printk(KERN_INFO, scp, "SCSI host reset "
7068 scmd_printk(KERN_INFO, scp, "SCSI host reset error\n");
7072 spin_lock_irqsave(shost->host_lock, flags);
7074 spin_unlock_irqrestore(shost->host_lock, flags);
7077 ASC_DBG(1, "ret %d\n", ret);
7083 * advansys_biosparam()
7085 * Translate disk drive geometry if the "BIOS greater than 1 GB"
7086 * support is enabled for a drive.
7088 * ip (information pointer) is an int array with the following definition:
7094 advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev,
7095 sector_t capacity, int ip[])
7097 struct asc_board *boardp = shost_priv(sdev->host);
7099 ASC_DBG(1, "begin\n");
7100 ASC_STATS(sdev->host, biosparam);
7101 if (ASC_NARROW_BOARD(boardp)) {
7102 if ((boardp->dvc_var.asc_dvc_var.dvc_cntl &
7103 ASC_CNTL_BIOS_GT_1GB) && capacity > 0x200000) {
7111 if ((boardp->dvc_var.adv_dvc_var.bios_ctrl &
7112 BIOS_CTRL_EXTENDED_XLAT) && capacity > 0x200000) {
7120 ip[2] = (unsigned long)capacity / (ip[0] * ip[1]);
7121 ASC_DBG(1, "end\n");
7126 * First-level interrupt handler.
7128 * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host.
7130 static irqreturn_t advansys_interrupt(int irq, void *dev_id)
7132 struct Scsi_Host *shost = dev_id;
7133 struct asc_board *boardp = shost_priv(shost);
7134 irqreturn_t result = IRQ_NONE;
7135 unsigned long flags;
7137 ASC_DBG(2, "boardp 0x%p\n", boardp);
7138 spin_lock_irqsave(shost->host_lock, flags);
7139 if (ASC_NARROW_BOARD(boardp)) {
7140 if (AscIsIntPending(shost->io_port)) {
7141 result = IRQ_HANDLED;
7142 ASC_STATS(shost, interrupt);
7143 ASC_DBG(1, "before AscISR()\n");
7144 AscISR(&boardp->dvc_var.asc_dvc_var);
7147 ASC_DBG(1, "before AdvISR()\n");
7148 if (AdvISR(&boardp->dvc_var.adv_dvc_var)) {
7149 result = IRQ_HANDLED;
7150 ASC_STATS(shost, interrupt);
7153 spin_unlock_irqrestore(shost->host_lock, flags);
7155 ASC_DBG(1, "end\n");
7159 static bool AscHostReqRiscHalt(PortAddr iop_base)
7163 uchar saved_stop_code;
7165 if (AscIsChipHalted(iop_base))
7167 saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B);
7168 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B,
7169 ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP);
7171 if (AscIsChipHalted(iop_base)) {
7176 } while (count++ < 20);
7177 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code);
7182 AscSetRunChipSynRegAtID(PortAddr iop_base, uchar tid_no, uchar sdtr_data)
7186 if (AscHostReqRiscHalt(iop_base)) {
7187 sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data);
7188 AscStartChip(iop_base);
7193 static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev)
7195 char type = sdev->type;
7196 ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id;
7198 if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN))
7200 if (asc_dvc->init_sdtr & tid_bits)
7203 if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0))
7204 asc_dvc->pci_fix_asyn_xfer_always |= tid_bits;
7206 asc_dvc->pci_fix_asyn_xfer |= tid_bits;
7207 if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) ||
7208 (type == TYPE_ROM) || (type == TYPE_TAPE))
7209 asc_dvc->pci_fix_asyn_xfer &= ~tid_bits;
7211 if (asc_dvc->pci_fix_asyn_xfer & tid_bits)
7212 AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id,
7213 ASYN_SDTR_DATA_FIX_PCI_REV_AB);
7217 advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc)
7219 ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id;
7220 ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng;
7222 if (sdev->lun == 0) {
7223 ASC_SCSI_BIT_ID_TYPE orig_init_sdtr = asc_dvc->init_sdtr;
7224 if ((asc_dvc->cfg->sdtr_enable & tid_bit) && sdev->sdtr) {
7225 asc_dvc->init_sdtr |= tid_bit;
7227 asc_dvc->init_sdtr &= ~tid_bit;
7230 if (orig_init_sdtr != asc_dvc->init_sdtr)
7231 AscAsyncFix(asc_dvc, sdev);
7234 if (sdev->tagged_supported) {
7235 if (asc_dvc->cfg->cmd_qng_enabled & tid_bit) {
7236 if (sdev->lun == 0) {
7237 asc_dvc->cfg->can_tagged_qng |= tid_bit;
7238 asc_dvc->use_tagged_qng |= tid_bit;
7240 scsi_change_queue_depth(sdev,
7241 asc_dvc->max_dvc_qng[sdev->id]);
7244 if (sdev->lun == 0) {
7245 asc_dvc->cfg->can_tagged_qng &= ~tid_bit;
7246 asc_dvc->use_tagged_qng &= ~tid_bit;
7250 if ((sdev->lun == 0) &&
7251 (orig_use_tagged_qng != asc_dvc->use_tagged_qng)) {
7252 AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B,
7253 asc_dvc->cfg->disc_enable);
7254 AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B,
7255 asc_dvc->use_tagged_qng);
7256 AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B,
7257 asc_dvc->cfg->can_tagged_qng);
7259 asc_dvc->max_dvc_qng[sdev->id] =
7260 asc_dvc->cfg->max_tag_qng[sdev->id];
7261 AscWriteLramByte(asc_dvc->iop_base,
7262 (ushort)(ASCV_MAX_DVC_QNG_BEG + sdev->id),
7263 asc_dvc->max_dvc_qng[sdev->id]);
7270 * If the EEPROM enabled WDTR for the device and the device supports wide
7271 * bus (16 bit) transfers, then turn on the device's 'wdtr_able' bit and
7272 * write the new value to the microcode.
7275 advansys_wide_enable_wdtr(AdvPortAddr iop_base, unsigned short tidmask)
7277 unsigned short cfg_word;
7278 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word);
7279 if ((cfg_word & tidmask) != 0)
7282 cfg_word |= tidmask;
7283 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word);
7286 * Clear the microcode SDTR and WDTR negotiation done indicators for
7287 * the target to cause it to negotiate with the new setting set above.
7288 * WDTR when accepted causes the target to enter asynchronous mode, so
7289 * SDTR must be negotiated.
7291 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
7292 cfg_word &= ~tidmask;
7293 AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
7294 AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word);
7295 cfg_word &= ~tidmask;
7296 AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word);
7300 * Synchronous Transfers
7302 * If the EEPROM enabled SDTR for the device and the device
7303 * supports synchronous transfers, then turn on the device's
7304 * 'sdtr_able' bit. Write the new value to the microcode.
7307 advansys_wide_enable_sdtr(AdvPortAddr iop_base, unsigned short tidmask)
7309 unsigned short cfg_word;
7310 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word);
7311 if ((cfg_word & tidmask) != 0)
7314 cfg_word |= tidmask;
7315 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word);
7318 * Clear the microcode "SDTR negotiation" done indicator for the
7319 * target to cause it to negotiate with the new setting set above.
7321 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
7322 cfg_word &= ~tidmask;
7323 AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
7327 * PPR (Parallel Protocol Request) Capable
7329 * If the device supports DT mode, then it must be PPR capable.
7330 * The PPR message will be used in place of the SDTR and WDTR
7331 * messages to negotiate synchronous speed and offset, transfer
7332 * width, and protocol options.
7334 static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc,
7335 AdvPortAddr iop_base, unsigned short tidmask)
7337 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able);
7338 adv_dvc->ppr_able |= tidmask;
7339 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able);
7343 advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc)
7345 AdvPortAddr iop_base = adv_dvc->iop_base;
7346 unsigned short tidmask = 1 << sdev->id;
7348 if (sdev->lun == 0) {
7350 * Handle WDTR, SDTR, and Tag Queuing. If the feature
7351 * is enabled in the EEPROM and the device supports the
7352 * feature, then enable it in the microcode.
7355 if ((adv_dvc->wdtr_able & tidmask) && sdev->wdtr)
7356 advansys_wide_enable_wdtr(iop_base, tidmask);
7357 if ((adv_dvc->sdtr_able & tidmask) && sdev->sdtr)
7358 advansys_wide_enable_sdtr(iop_base, tidmask);
7359 if (adv_dvc->chip_type == ADV_CHIP_ASC38C1600 && sdev->ppr)
7360 advansys_wide_enable_ppr(adv_dvc, iop_base, tidmask);
7363 * Tag Queuing is disabled for the BIOS which runs in polled
7364 * mode and would see no benefit from Tag Queuing. Also by
7365 * disabling Tag Queuing in the BIOS devices with Tag Queuing
7366 * bugs will at least work with the BIOS.
7368 if ((adv_dvc->tagqng_able & tidmask) &&
7369 sdev->tagged_supported) {
7370 unsigned short cfg_word;
7371 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word);
7372 cfg_word |= tidmask;
7373 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE,
7375 AdvWriteByteLram(iop_base,
7376 ASC_MC_NUMBER_OF_MAX_CMD + sdev->id,
7377 adv_dvc->max_dvc_qng);
7381 if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported)
7382 scsi_change_queue_depth(sdev, adv_dvc->max_dvc_qng);
7386 * Set the number of commands to queue per device for the
7387 * specified host adapter.
7389 static int advansys_slave_configure(struct scsi_device *sdev)
7391 struct asc_board *boardp = shost_priv(sdev->host);
7393 if (ASC_NARROW_BOARD(boardp))
7394 advansys_narrow_slave_configure(sdev,
7395 &boardp->dvc_var.asc_dvc_var);
7397 advansys_wide_slave_configure(sdev,
7398 &boardp->dvc_var.adv_dvc_var);
7403 static __le32 asc_get_sense_buffer_dma(struct scsi_cmnd *scp)
7405 struct asc_board *board = shost_priv(scp->device->host);
7407 scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer,
7408 SCSI_SENSE_BUFFERSIZE,
7410 if (dma_mapping_error(board->dev, scp->SCp.dma_handle)) {
7411 ASC_DBG(1, "failed to map sense buffer\n");
7414 return cpu_to_le32(scp->SCp.dma_handle);
7417 static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
7418 struct asc_scsi_q *asc_scsi_q)
7420 struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var;
7424 memset(asc_scsi_q, 0, sizeof(*asc_scsi_q));
7427 * Set the srb_tag to the command tag + 1, as
7428 * srb_tag '0' is used internally by the chip.
7430 srb_tag = scp->request->tag + 1;
7431 asc_scsi_q->q2.srb_tag = srb_tag;
7434 * Build the ASC_SCSI_Q request.
7436 asc_scsi_q->cdbptr = &scp->cmnd[0];
7437 asc_scsi_q->q2.cdb_len = scp->cmd_len;
7438 asc_scsi_q->q1.target_id = ASC_TID_TO_TARGET_ID(scp->device->id);
7439 asc_scsi_q->q1.target_lun = scp->device->lun;
7440 asc_scsi_q->q2.target_ix =
7441 ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun);
7442 asc_scsi_q->q1.sense_addr = asc_get_sense_buffer_dma(scp);
7443 asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE;
7444 if (!asc_scsi_q->q1.sense_addr)
7448 * If there are any outstanding requests for the current target,
7449 * then every 255th request send an ORDERED request. This heuristic
7450 * tries to retain the benefit of request sorting while preventing
7451 * request starvation. 255 is the max number of tags or pending commands
7452 * a device may have outstanding.
7454 * The request count is incremented below for every successfully
7458 if ((asc_dvc->cur_dvc_qng[scp->device->id] > 0) &&
7459 (boardp->reqcnt[scp->device->id] % 255) == 0) {
7460 asc_scsi_q->q2.tag_code = ORDERED_QUEUE_TAG;
7462 asc_scsi_q->q2.tag_code = SIMPLE_QUEUE_TAG;
7465 /* Build ASC_SCSI_Q */
7466 use_sg = scsi_dma_map(scp);
7468 ASC_DBG(1, "failed to map sglist\n");
7470 } else if (use_sg > 0) {
7472 struct scatterlist *slp;
7473 struct asc_sg_head *asc_sg_head;
7475 if (use_sg > scp->device->host->sg_tablesize) {
7476 scmd_printk(KERN_ERR, scp, "use_sg %d > "
7477 "sg_tablesize %d\n", use_sg,
7478 scp->device->host->sg_tablesize);
7479 scsi_dma_unmap(scp);
7480 set_host_byte(scp, DID_ERROR);
7484 asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) +
7485 use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC);
7487 scsi_dma_unmap(scp);
7488 set_host_byte(scp, DID_SOFT_ERROR);
7492 asc_scsi_q->q1.cntl |= QC_SG_HEAD;
7493 asc_scsi_q->sg_head = asc_sg_head;
7494 asc_scsi_q->q1.data_cnt = 0;
7495 asc_scsi_q->q1.data_addr = 0;
7496 /* This is a byte value, otherwise it would need to be swapped. */
7497 asc_sg_head->entry_cnt = asc_scsi_q->q1.sg_queue_cnt = use_sg;
7498 ASC_STATS_ADD(scp->device->host, xfer_elem,
7499 asc_sg_head->entry_cnt);
7502 * Convert scatter-gather list into ASC_SG_HEAD list.
7504 scsi_for_each_sg(scp, slp, use_sg, sgcnt) {
7505 asc_sg_head->sg_list[sgcnt].addr =
7506 cpu_to_le32(sg_dma_address(slp));
7507 asc_sg_head->sg_list[sgcnt].bytes =
7508 cpu_to_le32(sg_dma_len(slp));
7509 ASC_STATS_ADD(scp->device->host, xfer_sect,
7510 DIV_ROUND_UP(sg_dma_len(slp), 512));
7514 ASC_STATS(scp->device->host, xfer_cnt);
7516 ASC_DBG_PRT_ASC_SCSI_Q(2, asc_scsi_q);
7517 ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len);
7523 * Build scatter-gather list for Adv Library (Wide Board).
7525 * Additional ADV_SG_BLOCK structures will need to be allocated
7526 * if the total number of scatter-gather elements exceeds
7527 * NO_OF_SG_PER_BLOCK (15). The ADV_SG_BLOCK structures are
7528 * assumed to be physically contiguous.
7531 * ADV_SUCCESS(1) - SG List successfully created
7532 * ADV_ERROR(-1) - SG List creation failed
7535 adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
7536 ADV_SCSI_REQ_Q *scsiqp, struct scsi_cmnd *scp, int use_sg)
7538 adv_sgblk_t *sgblkp, *prev_sgblkp;
7539 struct scatterlist *slp;
7541 ADV_SG_BLOCK *sg_block, *prev_sg_block;
7542 dma_addr_t sgblk_paddr;
7545 slp = scsi_sglist(scp);
7546 sg_elem_cnt = use_sg;
7548 prev_sg_block = NULL;
7549 reqp->sgblkp = NULL;
7553 * Allocate a 'adv_sgblk_t' structure from the board free
7554 * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK
7555 * (15) scatter-gather elements.
7557 sgblkp = dma_pool_alloc(boardp->adv_sgblk_pool, GFP_ATOMIC,
7560 ASC_DBG(1, "no free adv_sgblk_t\n");
7561 ASC_STATS(scp->device->host, adv_build_nosg);
7564 * Allocation failed. Free 'adv_sgblk_t' structures
7565 * already allocated for the request.
7567 while ((sgblkp = reqp->sgblkp) != NULL) {
7568 /* Remove 'sgblkp' from the request list. */
7569 reqp->sgblkp = sgblkp->next_sgblkp;
7570 sgblkp->next_sgblkp = NULL;
7571 dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
7576 /* Complete 'adv_sgblk_t' board allocation. */
7577 sgblkp->sg_addr = sgblk_paddr;
7578 sgblkp->next_sgblkp = NULL;
7579 sg_block = &sgblkp->sg_block;
7582 * Check if this is the first 'adv_sgblk_t' for the
7585 if (reqp->sgblkp == NULL) {
7586 /* Request's first scatter-gather block. */
7587 reqp->sgblkp = sgblkp;
7590 * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical
7593 scsiqp->sg_list_ptr = sg_block;
7594 scsiqp->sg_real_addr = cpu_to_le32(sgblk_paddr);
7596 /* Request's second or later scatter-gather block. */
7597 prev_sgblkp->next_sgblkp = sgblkp;
7600 * Point the previous ADV_SG_BLOCK structure to
7601 * the newly allocated ADV_SG_BLOCK structure.
7603 prev_sg_block->sg_ptr = cpu_to_le32(sgblk_paddr);
7606 for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) {
7607 sg_block->sg_list[i].sg_addr =
7608 cpu_to_le32(sg_dma_address(slp));
7609 sg_block->sg_list[i].sg_count =
7610 cpu_to_le32(sg_dma_len(slp));
7611 ASC_STATS_ADD(scp->device->host, xfer_sect,
7612 DIV_ROUND_UP(sg_dma_len(slp), 512));
7614 if (--sg_elem_cnt == 0) {
7616 * Last ADV_SG_BLOCK and scatter-gather entry.
7618 sg_block->sg_cnt = i + 1;
7619 sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
7624 sg_block->sg_cnt = NO_OF_SG_PER_BLOCK;
7625 prev_sg_block = sg_block;
7626 prev_sgblkp = sgblkp;
7631 * Build a request structure for the Adv Library (Wide Board).
7633 * If an adv_req_t can not be allocated to issue the request,
7634 * then return ASC_BUSY. If an error occurs, then return ASC_ERROR.
7636 * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the
7637 * microcode for DMA addresses or math operations are byte swapped
7638 * to little-endian order.
7641 adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
7642 adv_req_t **adv_reqpp)
7644 u32 srb_tag = scp->request->tag;
7646 ADV_SCSI_REQ_Q *scsiqp;
7649 dma_addr_t sense_addr;
7652 * Allocate an adv_req_t structure from the board to execute
7655 reqp = &boardp->adv_reqp[srb_tag];
7656 if (reqp->cmndp && reqp->cmndp != scp ) {
7657 ASC_DBG(1, "no free adv_req_t\n");
7658 ASC_STATS(scp->device->host, adv_build_noreq);
7662 reqp->req_addr = boardp->adv_reqp_addr + (srb_tag * sizeof(adv_req_t));
7664 scsiqp = &reqp->scsi_req_q;
7667 * Initialize the structure.
7669 scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0;
7672 * Set the srb_tag to the command tag.
7674 scsiqp->srb_tag = srb_tag;
7677 * Set 'host_scribble' to point to the adv_req_t structure.
7680 scp->host_scribble = (void *)reqp;
7683 * Build the ADV_SCSI_REQ_Q request.
7686 /* Set CDB length and copy it to the request structure. */
7687 scsiqp->cdb_len = scp->cmd_len;
7688 /* Copy first 12 CDB bytes to cdb[]. */
7689 memcpy(scsiqp->cdb, scp->cmnd, scp->cmd_len < 12 ? scp->cmd_len : 12);
7690 /* Copy last 4 CDB bytes, if present, to cdb16[]. */
7691 if (scp->cmd_len > 12) {
7692 int cdb16_len = scp->cmd_len - 12;
7694 memcpy(scsiqp->cdb16, &scp->cmnd[12], cdb16_len);
7697 scsiqp->target_id = scp->device->id;
7698 scsiqp->target_lun = scp->device->lun;
7700 sense_addr = dma_map_single(boardp->dev, scp->sense_buffer,
7701 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
7702 if (dma_mapping_error(boardp->dev, sense_addr)) {
7703 ASC_DBG(1, "failed to map sense buffer\n");
7704 ASC_STATS(scp->device->host, adv_build_noreq);
7707 scsiqp->sense_addr = cpu_to_le32(sense_addr);
7708 scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE;
7710 /* Build ADV_SCSI_REQ_Q */
7712 use_sg = scsi_dma_map(scp);
7714 ASC_DBG(1, "failed to map SG list\n");
7715 ASC_STATS(scp->device->host, adv_build_noreq);
7717 } else if (use_sg == 0) {
7718 /* Zero-length transfer */
7719 reqp->sgblkp = NULL;
7720 scsiqp->data_cnt = 0;
7722 scsiqp->data_addr = 0;
7723 scsiqp->sg_list_ptr = NULL;
7724 scsiqp->sg_real_addr = 0;
7726 if (use_sg > ADV_MAX_SG_LIST) {
7727 scmd_printk(KERN_ERR, scp, "use_sg %d > "
7728 "ADV_MAX_SG_LIST %d\n", use_sg,
7729 scp->device->host->sg_tablesize);
7730 scsi_dma_unmap(scp);
7731 set_host_byte(scp, DID_ERROR);
7733 scp->host_scribble = NULL;
7738 scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp));
7740 ret = adv_get_sglist(boardp, reqp, scsiqp, scp, use_sg);
7741 if (ret != ADV_SUCCESS) {
7742 scsi_dma_unmap(scp);
7743 set_host_byte(scp, DID_ERROR);
7745 scp->host_scribble = NULL;
7750 ASC_STATS_ADD(scp->device->host, xfer_elem, use_sg);
7753 ASC_STATS(scp->device->host, xfer_cnt);
7755 ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
7756 ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len);
7763 static int AscSgListToQueue(int sg_list)
7767 n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q);
7768 if (((sg_list - 1) % ASC_SG_LIST_PER_Q) != 0)
7770 return n_sg_list_qs + 1;
7774 AscGetNumOfFreeQueue(ASC_DVC_VAR *asc_dvc, uchar target_ix, uchar n_qs)
7778 ASC_SCSI_BIT_ID_TYPE target_id;
7781 target_id = ASC_TIX_TO_TARGET_ID(target_ix);
7782 tid_no = ASC_TIX_TO_TID(target_ix);
7783 if ((asc_dvc->unit_not_ready & target_id) ||
7784 (asc_dvc->queue_full_or_busy & target_id)) {
7788 cur_used_qs = (uint) asc_dvc->cur_total_qng +
7789 (uint) asc_dvc->last_q_shortage + (uint) ASC_MIN_FREE_Q;
7791 cur_used_qs = (uint) asc_dvc->cur_total_qng +
7792 (uint) ASC_MIN_FREE_Q;
7794 if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) {
7795 cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs;
7796 if (asc_dvc->cur_dvc_qng[tid_no] >=
7797 asc_dvc->max_dvc_qng[tid_no]) {
7803 if ((n_qs > asc_dvc->last_q_shortage)
7804 && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q))) {
7805 asc_dvc->last_q_shortage = n_qs;
7811 static uchar AscAllocFreeQueue(PortAddr iop_base, uchar free_q_head)
7817 q_addr = ASC_QNO_TO_QADDR(free_q_head);
7818 q_status = (uchar)AscReadLramByte(iop_base,
7820 ASC_SCSIQ_B_STATUS));
7821 next_qp = AscReadLramByte(iop_base, (ushort)(q_addr + ASC_SCSIQ_B_FWD));
7822 if (((q_status & QS_READY) == 0) && (next_qp != ASC_QLINK_END))
7824 return ASC_QLINK_END;
7828 AscAllocMultipleFreeQueue(PortAddr iop_base, uchar free_q_head, uchar n_free_q)
7832 for (i = 0; i < n_free_q; i++) {
7833 free_q_head = AscAllocFreeQueue(iop_base, free_q_head);
7834 if (free_q_head == ASC_QLINK_END)
7842 * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words)
7844 * Calling/Exit State:
7848 * Output an ASC_SCSI_Q structure to the chip
7851 DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words)
7855 ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", outbuf, 2 * words);
7856 AscSetChipLramAddr(iop_base, s_addr);
7857 for (i = 0; i < 2 * words; i += 2) {
7858 if (i == 4 || i == 20) {
7861 outpw(iop_base + IOP_RAM_DATA,
7862 ((ushort)outbuf[i + 1] << 8) | outbuf[i]);
7866 static int AscPutReadyQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
7871 uchar syn_period_ix;
7875 iop_base = asc_dvc->iop_base;
7876 if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) &&
7877 ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) {
7878 tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix);
7879 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
7881 (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1);
7882 syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET;
7883 AscMsgOutSDTR(asc_dvc,
7884 asc_dvc->sdtr_period_tbl[syn_period_ix],
7886 scsiq->q1.cntl |= QC_MSG_OUT;
7888 q_addr = ASC_QNO_TO_QADDR(q_no);
7889 if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) {
7890 scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG;
7892 scsiq->q1.status = QS_FREE;
7893 AscMemWordCopyPtrToLram(iop_base,
7894 q_addr + ASC_SCSIQ_CDB_BEG,
7895 (uchar *)scsiq->cdbptr, scsiq->q2.cdb_len >> 1);
7897 DvcPutScsiQ(iop_base,
7898 q_addr + ASC_SCSIQ_CPY_BEG,
7899 (uchar *)&scsiq->q1.cntl,
7900 ((sizeof(ASC_SCSIQ_1) + sizeof(ASC_SCSIQ_2)) / 2) - 1);
7901 AscWriteLramWord(iop_base,
7902 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS),
7903 (ushort)(((ushort)scsiq->q1.
7904 q_no << 8) | (ushort)QS_READY));
7909 AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
7913 ASC_SG_HEAD *sg_head;
7914 ASC_SG_LIST_Q scsi_sg_q;
7915 __le32 saved_data_addr;
7916 __le32 saved_data_cnt;
7918 ushort sg_list_dwords;
7920 ushort sg_entry_cnt;
7924 iop_base = asc_dvc->iop_base;
7925 sg_head = scsiq->sg_head;
7926 saved_data_addr = scsiq->q1.data_addr;
7927 saved_data_cnt = scsiq->q1.data_cnt;
7928 scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
7929 scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
7931 * Set sg_entry_cnt to be the number of SG elements that
7932 * will fit in the allocated SG queues. It is minus 1, because
7933 * the first SG element is handled above.
7935 sg_entry_cnt = sg_head->entry_cnt - 1;
7937 if (sg_entry_cnt != 0) {
7938 scsiq->q1.cntl |= QC_SG_HEAD;
7939 q_addr = ASC_QNO_TO_QADDR(q_no);
7941 scsiq->q1.sg_queue_cnt = sg_head->queue_cnt;
7942 scsi_sg_q.sg_head_qp = q_no;
7943 scsi_sg_q.cntl = QCSG_SG_XFER_LIST;
7944 for (i = 0; i < sg_head->queue_cnt; i++) {
7945 scsi_sg_q.seq_no = i + 1;
7946 if (sg_entry_cnt > ASC_SG_LIST_PER_Q) {
7947 sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2);
7948 sg_entry_cnt -= ASC_SG_LIST_PER_Q;
7950 scsi_sg_q.sg_list_cnt =
7952 scsi_sg_q.sg_cur_list_cnt =
7955 scsi_sg_q.sg_list_cnt =
7956 ASC_SG_LIST_PER_Q - 1;
7957 scsi_sg_q.sg_cur_list_cnt =
7958 ASC_SG_LIST_PER_Q - 1;
7961 scsi_sg_q.cntl |= QCSG_SG_XFER_END;
7962 sg_list_dwords = sg_entry_cnt << 1;
7964 scsi_sg_q.sg_list_cnt = sg_entry_cnt;
7965 scsi_sg_q.sg_cur_list_cnt =
7968 scsi_sg_q.sg_list_cnt =
7970 scsi_sg_q.sg_cur_list_cnt =
7975 next_qp = AscReadLramByte(iop_base,
7978 scsi_sg_q.q_no = next_qp;
7979 q_addr = ASC_QNO_TO_QADDR(next_qp);
7980 AscMemWordCopyPtrToLram(iop_base,
7981 q_addr + ASC_SCSIQ_SGHD_CPY_BEG,
7982 (uchar *)&scsi_sg_q,
7983 sizeof(ASC_SG_LIST_Q) >> 1);
7984 AscMemDWordCopyPtrToLram(iop_base,
7985 q_addr + ASC_SGQ_LIST_BEG,
7989 sg_index += ASC_SG_LIST_PER_Q;
7990 scsiq->next_sg_index = sg_index;
7993 scsiq->q1.cntl &= ~QC_SG_HEAD;
7995 sta = AscPutReadyQueue(asc_dvc, scsiq, q_no);
7996 scsiq->q1.data_addr = saved_data_addr;
7997 scsiq->q1.data_cnt = saved_data_cnt;
8002 AscSendScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar n_q_required)
8011 iop_base = asc_dvc->iop_base;
8012 target_ix = scsiq->q2.target_ix;
8013 tid_no = ASC_TIX_TO_TID(target_ix);
8015 free_q_head = (uchar)AscGetVarFreeQHead(iop_base);
8016 if (n_q_required > 1) {
8017 next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head,
8018 (uchar)n_q_required);
8019 if (next_qp != ASC_QLINK_END) {
8020 asc_dvc->last_q_shortage = 0;
8021 scsiq->sg_head->queue_cnt = n_q_required - 1;
8022 scsiq->q1.q_no = free_q_head;
8023 sta = AscPutReadySgListQueue(asc_dvc, scsiq,
8026 } else if (n_q_required == 1) {
8027 next_qp = AscAllocFreeQueue(iop_base, free_q_head);
8028 if (next_qp != ASC_QLINK_END) {
8029 scsiq->q1.q_no = free_q_head;
8030 sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head);
8034 AscPutVarFreeQHead(iop_base, next_qp);
8035 asc_dvc->cur_total_qng += n_q_required;
8036 asc_dvc->cur_dvc_qng[tid_no]++;
8041 #define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16
8042 static uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] = {
8061 static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
8066 bool disable_syn_offset_one_fix;
8069 ushort sg_entry_cnt = 0;
8070 ushort sg_entry_cnt_minus_one = 0;
8077 ASC_SG_HEAD *sg_head;
8078 unsigned long data_cnt;
8080 iop_base = asc_dvc->iop_base;
8081 sg_head = scsiq->sg_head;
8082 if (asc_dvc->err_code != 0)
8085 if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) {
8086 scsiq->q1.extra_bytes = 0;
8089 target_ix = scsiq->q2.target_ix;
8090 tid_no = ASC_TIX_TO_TID(target_ix);
8092 if (scsiq->cdbptr[0] == REQUEST_SENSE) {
8093 if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) {
8094 asc_dvc->sdtr_done &= ~scsiq->q1.target_id;
8095 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
8096 AscMsgOutSDTR(asc_dvc,
8098 sdtr_period_tbl[(sdtr_data >> 4) &
8102 (uchar)(sdtr_data & (uchar)
8103 ASC_SYN_MAX_OFFSET));
8104 scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT);
8107 if (asc_dvc->in_critical_cnt != 0) {
8108 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY);
8111 asc_dvc->in_critical_cnt++;
8112 if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
8113 if ((sg_entry_cnt = sg_head->entry_cnt) == 0) {
8114 asc_dvc->in_critical_cnt--;
8117 if (sg_entry_cnt > ASC_MAX_SG_LIST) {
8118 asc_dvc->in_critical_cnt--;
8121 if (sg_entry_cnt == 1) {
8122 scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
8123 scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
8124 scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE);
8126 sg_entry_cnt_minus_one = sg_entry_cnt - 1;
8128 scsi_cmd = scsiq->cdbptr[0];
8129 disable_syn_offset_one_fix = false;
8130 if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) &&
8131 !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) {
8132 if (scsiq->q1.cntl & QC_SG_HEAD) {
8134 for (i = 0; i < sg_entry_cnt; i++) {
8135 data_cnt += le32_to_cpu(sg_head->sg_list[i].
8139 data_cnt = le32_to_cpu(scsiq->q1.data_cnt);
8141 if (data_cnt != 0UL) {
8142 if (data_cnt < 512UL) {
8143 disable_syn_offset_one_fix = true;
8145 for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST;
8148 _syn_offset_one_disable_cmd[i];
8149 if (disable_cmd == 0xFF) {
8152 if (scsi_cmd == disable_cmd) {
8153 disable_syn_offset_one_fix =
8161 if (disable_syn_offset_one_fix) {
8162 scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG;
8163 scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX |
8164 ASC_TAG_FLAG_DISABLE_DISCONNECT);
8166 scsiq->q2.tag_code &= 0x27;
8168 if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
8169 if (asc_dvc->bug_fix_cntl) {
8170 if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
8171 if ((scsi_cmd == READ_6) ||
8172 (scsi_cmd == READ_10)) {
8173 addr = le32_to_cpu(sg_head->
8175 [sg_entry_cnt_minus_one].
8177 le32_to_cpu(sg_head->
8179 [sg_entry_cnt_minus_one].
8182 (uchar)((ushort)addr & 0x0003);
8183 if ((extra_bytes != 0)
8187 ASC_TAG_FLAG_EXTRA_BYTES)
8189 scsiq->q2.tag_code |=
8190 ASC_TAG_FLAG_EXTRA_BYTES;
8191 scsiq->q1.extra_bytes =
8194 le32_to_cpu(sg_head->
8196 [sg_entry_cnt_minus_one].
8198 data_cnt -= extra_bytes;
8201 [sg_entry_cnt_minus_one].
8203 cpu_to_le32(data_cnt);
8208 sg_head->entry_to_copy = sg_head->entry_cnt;
8209 n_q_required = AscSgListToQueue(sg_entry_cnt);
8210 if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >=
8211 (uint) n_q_required)
8212 || ((scsiq->q1.cntl & QC_URGENT) != 0)) {
8214 AscSendScsiQueue(asc_dvc, scsiq,
8215 n_q_required)) == 1) {
8216 asc_dvc->in_critical_cnt--;
8221 if (asc_dvc->bug_fix_cntl) {
8222 if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
8223 if ((scsi_cmd == READ_6) ||
8224 (scsi_cmd == READ_10)) {
8226 le32_to_cpu(scsiq->q1.data_addr) +
8227 le32_to_cpu(scsiq->q1.data_cnt);
8229 (uchar)((ushort)addr & 0x0003);
8230 if ((extra_bytes != 0)
8234 ASC_TAG_FLAG_EXTRA_BYTES)
8237 le32_to_cpu(scsiq->q1.
8239 if (((ushort)data_cnt & 0x01FF)
8241 scsiq->q2.tag_code |=
8242 ASC_TAG_FLAG_EXTRA_BYTES;
8243 data_cnt -= extra_bytes;
8244 scsiq->q1.data_cnt =
8247 scsiq->q1.extra_bytes =
8255 if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) ||
8256 ((scsiq->q1.cntl & QC_URGENT) != 0)) {
8257 if ((sta = AscSendScsiQueue(asc_dvc, scsiq,
8258 n_q_required)) == 1) {
8259 asc_dvc->in_critical_cnt--;
8264 asc_dvc->in_critical_cnt--;
8269 * AdvExeScsiQueue() - Send a request to the RISC microcode program.
8271 * Allocate a carrier structure, point the carrier to the ADV_SCSI_REQ_Q,
8272 * add the carrier to the ICQ (Initiator Command Queue), and tickle the
8273 * RISC to notify it a new command is ready to be executed.
8275 * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be
8276 * set to SCSI_MAX_RETRY.
8278 * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the microcode
8279 * for DMA addresses or math operations are byte swapped to little-endian
8283 * ADV_SUCCESS(1) - The request was successfully queued.
8284 * ADV_BUSY(0) - Resource unavailable; Retry again after pending
8285 * request completes.
8286 * ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure
8289 static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, adv_req_t *reqp)
8291 AdvPortAddr iop_base;
8292 ADV_CARR_T *new_carrp;
8293 ADV_SCSI_REQ_Q *scsiq = &reqp->scsi_req_q;
8296 * The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID.
8298 if (scsiq->target_id > ADV_MAX_TID) {
8299 scsiq->host_status = QHSTA_M_INVALID_DEVICE;
8300 scsiq->done_status = QD_WITH_ERROR;
8304 iop_base = asc_dvc->iop_base;
8307 * Allocate a carrier ensuring at least one carrier always
8308 * remains on the freelist and initialize fields.
8310 new_carrp = adv_get_next_carrier(asc_dvc);
8312 ASC_DBG(1, "No free carriers\n");
8316 asc_dvc->carr_pending_cnt++;
8318 /* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */
8319 scsiq->scsiq_ptr = cpu_to_le32(scsiq->srb_tag);
8320 scsiq->scsiq_rptr = cpu_to_le32(reqp->req_addr);
8322 scsiq->carr_va = asc_dvc->icq_sp->carr_va;
8323 scsiq->carr_pa = asc_dvc->icq_sp->carr_pa;
8326 * Use the current stopper to send the ADV_SCSI_REQ_Q command to
8327 * the microcode. The newly allocated stopper will become the new
8330 asc_dvc->icq_sp->areq_vpa = scsiq->scsiq_rptr;
8333 * Set the 'next_vpa' pointer for the old stopper to be the
8334 * physical address of the new stopper. The RISC can only
8335 * follow physical addresses.
8337 asc_dvc->icq_sp->next_vpa = new_carrp->carr_pa;
8340 * Set the host adapter stopper pointer to point to the new carrier.
8342 asc_dvc->icq_sp = new_carrp;
8344 if (asc_dvc->chip_type == ADV_CHIP_ASC3550 ||
8345 asc_dvc->chip_type == ADV_CHIP_ASC38C0800) {
8347 * Tickle the RISC to tell it to read its Command Queue Head pointer.
8349 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A);
8350 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) {
8352 * Clear the tickle value. In the ASC-3550 the RISC flag
8353 * command 'clr_tickle_a' does not work unless the host
8356 AdvWriteByteRegister(iop_base, IOPB_TICKLE,
8359 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) {
8361 * Notify the RISC a carrier is ready by writing the physical
8362 * address of the new carrier stopper to the COMMA register.
8364 AdvWriteDWordRegister(iop_base, IOPDW_COMMA,
8365 le32_to_cpu(new_carrp->carr_pa));
8372 * Execute a single 'struct scsi_cmnd'.
8374 static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
8377 struct asc_board *boardp = shost_priv(scp->device->host);
8379 ASC_DBG(1, "scp 0x%p\n", scp);
8381 if (ASC_NARROW_BOARD(boardp)) {
8382 ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var;
8383 struct asc_scsi_q asc_scsi_q;
8385 ret = asc_build_req(boardp, scp, &asc_scsi_q);
8386 if (ret != ASC_NOERROR) {
8387 ASC_STATS(scp->device->host, build_error);
8391 ret = AscExeScsiQueue(asc_dvc, &asc_scsi_q);
8392 kfree(asc_scsi_q.sg_head);
8393 err_code = asc_dvc->err_code;
8395 ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var;
8396 adv_req_t *adv_reqp;
8398 switch (adv_build_req(boardp, scp, &adv_reqp)) {
8400 ASC_DBG(3, "adv_build_req ASC_NOERROR\n");
8403 ASC_DBG(1, "adv_build_req ASC_BUSY\n");
8405 * The asc_stats fields 'adv_build_noreq' and
8406 * 'adv_build_nosg' count wide board busy conditions.
8407 * They are updated in adv_build_req and
8408 * adv_get_sglist, respectively.
8413 ASC_DBG(1, "adv_build_req ASC_ERROR\n");
8414 ASC_STATS(scp->device->host, build_error);
8418 ret = AdvExeScsiQueue(adv_dvc, adv_reqp);
8419 err_code = adv_dvc->err_code;
8424 ASC_STATS(scp->device->host, exe_noerror);
8426 * Increment monotonically increasing per device
8427 * successful request counter. Wrapping doesn't matter.
8429 boardp->reqcnt[scp->device->id]++;
8430 ASC_DBG(1, "ExeScsiQueue() ASC_NOERROR\n");
8433 ASC_DBG(1, "ExeScsiQueue() ASC_BUSY\n");
8434 ASC_STATS(scp->device->host, exe_busy);
8437 scmd_printk(KERN_ERR, scp, "ExeScsiQueue() ASC_ERROR, "
8438 "err_code 0x%x\n", err_code);
8439 ASC_STATS(scp->device->host, exe_error);
8440 set_host_byte(scp, DID_ERROR);
8443 scmd_printk(KERN_ERR, scp, "ExeScsiQueue() unknown, "
8444 "err_code 0x%x\n", err_code);
8445 ASC_STATS(scp->device->host, exe_unknown);
8446 set_host_byte(scp, DID_ERROR);
8450 ASC_DBG(1, "end\n");
8455 * advansys_queuecommand() - interrupt-driven I/O entrypoint.
8457 * This function always returns 0. Command return status is saved
8458 * in the 'scp' result field.
8461 advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
8463 struct Scsi_Host *shost = scp->device->host;
8464 int asc_res, result = 0;
8466 ASC_STATS(shost, queuecommand);
8467 scp->scsi_done = done;
8469 asc_res = asc_execute_scsi_cmnd(scp);
8475 result = SCSI_MLQUEUE_HOST_BUSY;
8486 static DEF_SCSI_QCMD(advansys_queuecommand)
8488 static ushort AscGetEisaChipCfg(PortAddr iop_base)
8490 PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
8491 (PortAddr) (ASC_EISA_CFG_IOP_MASK);
8492 return inpw(eisa_cfg_iop);
8496 * Return the BIOS address of the adapter at the specified
8497 * I/O port and with the specified bus type.
8499 static unsigned short AscGetChipBiosAddress(PortAddr iop_base,
8500 unsigned short bus_type)
8502 unsigned short cfg_lsw;
8503 unsigned short bios_addr;
8506 * The PCI BIOS is re-located by the motherboard BIOS. Because
8507 * of this the driver can not determine where a PCI BIOS is
8508 * loaded and executes.
8510 if (bus_type & ASC_IS_PCI)
8513 if ((bus_type & ASC_IS_EISA) != 0) {
8514 cfg_lsw = AscGetEisaChipCfg(iop_base);
8516 bios_addr = ASC_BIOS_MIN_ADDR + cfg_lsw * ASC_BIOS_BANK_SIZE;
8520 cfg_lsw = AscGetChipCfgLsw(iop_base);
8521 bios_addr = ASC_BIOS_MIN_ADDR + (cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE;
8525 static uchar AscSetChipScsiID(PortAddr iop_base, uchar new_host_id)
8529 if (AscGetChipScsiID(iop_base) == new_host_id) {
8530 return (new_host_id);
8532 cfg_lsw = AscGetChipCfgLsw(iop_base);
8534 cfg_lsw |= (ushort)((new_host_id & ASC_MAX_TID) << 8);
8535 AscSetChipCfgLsw(iop_base, cfg_lsw);
8536 return (AscGetChipScsiID(iop_base));
8539 static unsigned char AscGetChipScsiCtrl(PortAddr iop_base)
8543 AscSetBank(iop_base, 1);
8544 sc = inp(iop_base + IOP_REG_SC);
8545 AscSetBank(iop_base, 0);
8549 static unsigned char AscGetChipVersion(PortAddr iop_base,
8550 unsigned short bus_type)
8552 if (bus_type & ASC_IS_EISA) {
8554 unsigned char revision;
8555 eisa_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
8556 (PortAddr) ASC_EISA_REV_IOP_MASK;
8557 revision = inp(eisa_iop);
8558 return ASC_CHIP_MIN_VER_EISA - 1 + revision;
8560 return AscGetChipVerNo(iop_base);
8563 static int AscStopQueueExe(PortAddr iop_base)
8567 if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) == 0) {
8568 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B,
8569 ASC_STOP_REQ_RISC_STOP);
8571 if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) &
8572 ASC_STOP_ACK_RISC_STOP) {
8576 } while (count++ < 20);
8581 static unsigned int AscGetMaxDmaCount(ushort bus_type)
8583 if (bus_type & (ASC_IS_EISA | ASC_IS_VL))
8584 return ASC_MAX_VL_DMA_COUNT;
8585 return ASC_MAX_PCI_DMA_COUNT;
8588 static void AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
8594 iop_base = asc_dvc->iop_base;
8595 asc_dvc->err_code = 0;
8596 if ((asc_dvc->bus_type &
8597 (ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) {
8598 asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE;
8600 AscSetChipControl(iop_base, CC_HALT);
8601 AscSetChipStatus(iop_base, 0);
8602 asc_dvc->bug_fix_cntl = 0;
8603 asc_dvc->pci_fix_asyn_xfer = 0;
8604 asc_dvc->pci_fix_asyn_xfer_always = 0;
8605 /* asc_dvc->init_state initialized in AscInitGetConfig(). */
8606 asc_dvc->sdtr_done = 0;
8607 asc_dvc->cur_total_qng = 0;
8608 asc_dvc->is_in_int = false;
8609 asc_dvc->in_critical_cnt = 0;
8610 asc_dvc->last_q_shortage = 0;
8611 asc_dvc->use_tagged_qng = 0;
8612 asc_dvc->no_scam = 0;
8613 asc_dvc->unit_not_ready = 0;
8614 asc_dvc->queue_full_or_busy = 0;
8615 asc_dvc->redo_scam = 0;
8617 asc_dvc->min_sdtr_index = 0;
8618 asc_dvc->cfg->can_tagged_qng = 0;
8619 asc_dvc->cfg->cmd_qng_enabled = 0;
8620 asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL;
8621 asc_dvc->init_sdtr = 0;
8622 asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG;
8623 asc_dvc->scsi_reset_wait = 3;
8624 asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET;
8625 asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type);
8626 asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET;
8627 asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET;
8628 asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID;
8629 chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type);
8630 asc_dvc->cfg->chip_version = chip_version;
8631 asc_dvc->sdtr_period_tbl = asc_syn_xfer_period;
8632 asc_dvc->max_sdtr_index = 7;
8633 if ((asc_dvc->bus_type & ASC_IS_PCI) &&
8634 (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150)) {
8635 asc_dvc->bus_type = ASC_IS_PCI_ULTRA;
8636 asc_dvc->sdtr_period_tbl = asc_syn_ultra_xfer_period;
8637 asc_dvc->max_sdtr_index = 15;
8638 if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150) {
8639 AscSetExtraControl(iop_base,
8640 (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE));
8641 } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050) {
8642 AscSetExtraControl(iop_base,
8643 (SEC_ACTIVE_NEGATE |
8644 SEC_ENABLE_FILTER));
8647 if (asc_dvc->bus_type == ASC_IS_PCI) {
8648 AscSetExtraControl(iop_base,
8649 (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE));
8652 for (i = 0; i <= ASC_MAX_TID; i++) {
8653 asc_dvc->cur_dvc_qng[i] = 0;
8654 asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG;
8655 asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *)0L;
8656 asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *)0L;
8657 asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG;
8661 static int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg)
8665 for (retry = 0; retry < ASC_EEP_MAX_RETRY; retry++) {
8666 unsigned char read_back;
8667 AscSetChipEEPCmd(iop_base, cmd_reg);
8669 read_back = AscGetChipEEPCmd(iop_base);
8670 if (read_back == cmd_reg)
8676 static void AscWaitEEPRead(void)
8681 static ushort AscReadEEPWord(PortAddr iop_base, uchar addr)
8686 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE);
8688 cmd_reg = addr | ASC_EEP_CMD_READ;
8689 AscWriteEEPCmdReg(iop_base, cmd_reg);
8691 read_wval = AscGetChipEEPData(iop_base);
8696 static ushort AscGetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
8704 int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2;
8707 wbuf = (ushort *)cfg_buf;
8709 /* Read two config words; Byte-swapping done by AscReadEEPWord(). */
8710 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
8711 *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr);
8714 if (bus_type & ASC_IS_VL) {
8715 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
8716 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
8718 cfg_beg = ASC_EEP_DVC_CFG_BEG;
8719 cfg_end = ASC_EEP_MAX_DVC_ADDR;
8721 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
8722 wval = AscReadEEPWord(iop_base, (uchar)s_addr);
8723 if (s_addr <= uchar_end_in_config) {
8725 * Swap all char fields - must unswap bytes already swapped
8726 * by AscReadEEPWord().
8728 *wbuf = le16_to_cpu(wval);
8730 /* Don't swap word field at the end - cntl field. */
8733 sum += wval; /* Checksum treats all EEPROM data as words. */
8736 * Read the checksum word which will be compared against 'sum'
8737 * by the caller. Word field already swapped.
8739 *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr);
8743 static int AscTestExternalLram(ASC_DVC_VAR *asc_dvc)
8750 iop_base = asc_dvc->iop_base;
8752 q_addr = ASC_QNO_TO_QADDR(241);
8753 saved_word = AscReadLramWord(iop_base, q_addr);
8754 AscSetChipLramAddr(iop_base, q_addr);
8755 AscSetChipLramData(iop_base, 0x55AA);
8757 AscSetChipLramAddr(iop_base, q_addr);
8758 if (AscGetChipLramData(iop_base) == 0x55AA) {
8760 AscWriteLramWord(iop_base, q_addr, saved_word);
8765 static void AscWaitEEPWrite(void)
8770 static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg)
8777 AscSetChipEEPData(iop_base, data_reg);
8779 read_back = AscGetChipEEPData(iop_base);
8780 if (read_back == data_reg) {
8783 if (retry++ > ASC_EEP_MAX_RETRY) {
8789 static ushort AscWriteEEPWord(PortAddr iop_base, uchar addr, ushort word_val)
8793 read_wval = AscReadEEPWord(iop_base, addr);
8794 if (read_wval != word_val) {
8795 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE);
8797 AscWriteEEPDataReg(iop_base, word_val);
8799 AscWriteEEPCmdReg(iop_base,
8800 (uchar)((uchar)ASC_EEP_CMD_WRITE | addr));
8802 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE);
8804 return (AscReadEEPWord(iop_base, addr));
8809 static int AscSetEEPConfigOnce(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
8819 int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2;
8821 wbuf = (ushort *)cfg_buf;
8824 /* Write two config words; AscWriteEEPWord() will swap bytes. */
8825 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
8827 if (*wbuf != AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) {
8831 if (bus_type & ASC_IS_VL) {
8832 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
8833 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
8835 cfg_beg = ASC_EEP_DVC_CFG_BEG;
8836 cfg_end = ASC_EEP_MAX_DVC_ADDR;
8838 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
8839 if (s_addr <= uchar_end_in_config) {
8841 * This is a char field. Swap char fields before they are
8842 * swapped again by AscWriteEEPWord().
8844 word = cpu_to_le16(*wbuf);
8846 AscWriteEEPWord(iop_base, (uchar)s_addr, word)) {
8850 /* Don't swap word field at the end - cntl field. */
8852 AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) {
8856 sum += *wbuf; /* Checksum calculated from word values. */
8858 /* Write checksum word. It will be swapped by AscWriteEEPWord(). */
8860 if (sum != AscWriteEEPWord(iop_base, (uchar)s_addr, sum)) {
8864 /* Read EEPROM back again. */
8865 wbuf = (ushort *)cfg_buf;
8867 * Read two config words; Byte-swapping done by AscReadEEPWord().
8869 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
8870 if (*wbuf != AscReadEEPWord(iop_base, (uchar)s_addr)) {
8874 if (bus_type & ASC_IS_VL) {
8875 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
8876 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
8878 cfg_beg = ASC_EEP_DVC_CFG_BEG;
8879 cfg_end = ASC_EEP_MAX_DVC_ADDR;
8881 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
8882 if (s_addr <= uchar_end_in_config) {
8884 * Swap all char fields. Must unswap bytes already swapped
8885 * by AscReadEEPWord().
8888 le16_to_cpu(AscReadEEPWord
8889 (iop_base, (uchar)s_addr));
8891 /* Don't swap word field at the end - cntl field. */
8892 word = AscReadEEPWord(iop_base, (uchar)s_addr);
8894 if (*wbuf != word) {
8898 /* Read checksum; Byte swapping not needed. */
8899 if (AscReadEEPWord(iop_base, (uchar)s_addr) != sum) {
8905 static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
8913 if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf,
8917 if (++retry > ASC_EEP_MAX_RETRY) {
8924 static int AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
8926 ASCEEP_CONFIG eep_config_buf;
8927 ASCEEP_CONFIG *eep_config;
8931 ushort cfg_msw, cfg_lsw;
8935 iop_base = asc_dvc->iop_base;
8937 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE);
8938 AscStopQueueExe(iop_base);
8939 if ((AscStopChip(iop_base)) ||
8940 (AscGetChipScsiCtrl(iop_base) != 0)) {
8941 asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE;
8942 AscResetChipAndScsiBus(asc_dvc);
8943 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */
8945 if (!AscIsChipHalted(iop_base)) {
8946 asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
8949 AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
8950 if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
8951 asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
8954 eep_config = (ASCEEP_CONFIG *)&eep_config_buf;
8955 cfg_msw = AscGetChipCfgMsw(iop_base);
8956 cfg_lsw = AscGetChipCfgLsw(iop_base);
8957 if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) {
8958 cfg_msw &= ~ASC_CFG_MSW_CLR_MASK;
8959 warn_code |= ASC_WARN_CFG_MSW_RECOVER;
8960 AscSetChipCfgMsw(iop_base, cfg_msw);
8962 chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type);
8963 ASC_DBG(1, "chksum 0x%x\n", chksum);
8967 if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) {
8968 warn_code |= ASC_WARN_AUTO_CONFIG;
8969 if (asc_dvc->cfg->chip_version == 3) {
8970 if (eep_config->cfg_lsw != cfg_lsw) {
8971 warn_code |= ASC_WARN_EEPROM_RECOVER;
8972 eep_config->cfg_lsw =
8973 AscGetChipCfgLsw(iop_base);
8975 if (eep_config->cfg_msw != cfg_msw) {
8976 warn_code |= ASC_WARN_EEPROM_RECOVER;
8977 eep_config->cfg_msw =
8978 AscGetChipCfgMsw(iop_base);
8982 eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK;
8983 eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON;
8984 ASC_DBG(1, "eep_config->chksum 0x%x\n", eep_config->chksum);
8985 if (chksum != eep_config->chksum) {
8986 if (AscGetChipVersion(iop_base, asc_dvc->bus_type) ==
8987 ASC_CHIP_VER_PCI_ULTRA_3050) {
8988 ASC_DBG(1, "chksum error ignored; EEPROM-less board\n");
8989 eep_config->init_sdtr = 0xFF;
8990 eep_config->disc_enable = 0xFF;
8991 eep_config->start_motor = 0xFF;
8992 eep_config->use_cmd_qng = 0;
8993 eep_config->max_total_qng = 0xF0;
8994 eep_config->max_tag_qng = 0x20;
8995 eep_config->cntl = 0xBFFF;
8996 ASC_EEP_SET_CHIP_ID(eep_config, 7);
8997 eep_config->no_scam = 0;
8998 eep_config->adapter_info[0] = 0;
8999 eep_config->adapter_info[1] = 0;
9000 eep_config->adapter_info[2] = 0;
9001 eep_config->adapter_info[3] = 0;
9002 eep_config->adapter_info[4] = 0;
9003 /* Indicate EEPROM-less board. */
9004 eep_config->adapter_info[5] = 0xBB;
9007 ("AscInitFromEEP: EEPROM checksum error; Will try to re-write EEPROM.\n");
9009 warn_code |= ASC_WARN_EEPROM_CHKSUM;
9012 asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr;
9013 asc_dvc->cfg->disc_enable = eep_config->disc_enable;
9014 asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng;
9015 asc_dvc->start_motor = eep_config->start_motor;
9016 asc_dvc->dvc_cntl = eep_config->cntl;
9017 asc_dvc->no_scam = eep_config->no_scam;
9018 asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0];
9019 asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1];
9020 asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2];
9021 asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3];
9022 asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4];
9023 asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5];
9024 if (!AscTestExternalLram(asc_dvc)) {
9025 if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) ==
9026 ASC_IS_PCI_ULTRA)) {
9027 eep_config->max_total_qng =
9028 ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG;
9029 eep_config->max_tag_qng =
9030 ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG;
9032 eep_config->cfg_msw |= 0x0800;
9034 AscSetChipCfgMsw(iop_base, cfg_msw);
9035 eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG;
9036 eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG;
9040 if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG) {
9041 eep_config->max_total_qng = ASC_MIN_TOTAL_QNG;
9043 if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG) {
9044 eep_config->max_total_qng = ASC_MAX_TOTAL_QNG;
9046 if (eep_config->max_tag_qng > eep_config->max_total_qng) {
9047 eep_config->max_tag_qng = eep_config->max_total_qng;
9049 if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC) {
9050 eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC;
9052 asc_dvc->max_total_qng = eep_config->max_total_qng;
9053 if ((eep_config->use_cmd_qng & eep_config->disc_enable) !=
9054 eep_config->use_cmd_qng) {
9055 eep_config->disc_enable = eep_config->use_cmd_qng;
9056 warn_code |= ASC_WARN_CMD_QNG_CONFLICT;
9058 ASC_EEP_SET_CHIP_ID(eep_config,
9059 ASC_EEP_GET_CHIP_ID(eep_config) & ASC_MAX_TID);
9060 asc_dvc->cfg->chip_scsi_id = ASC_EEP_GET_CHIP_ID(eep_config);
9061 if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) &&
9062 !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA)) {
9063 asc_dvc->min_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX;
9066 for (i = 0; i <= ASC_MAX_TID; i++) {
9067 asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i];
9068 asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng;
9069 asc_dvc->cfg->sdtr_period_offset[i] =
9070 (uchar)(ASC_DEF_SDTR_OFFSET |
9071 (asc_dvc->min_sdtr_index << 4));
9073 eep_config->cfg_msw = AscGetChipCfgMsw(iop_base);
9075 if ((i = AscSetEEPConfig(iop_base, eep_config,
9076 asc_dvc->bus_type)) != 0) {
9078 ("AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n",
9082 ("AscInitFromEEP: Successfully re-wrote EEPROM.\n");
9088 static int AscInitGetConfig(struct Scsi_Host *shost)
9090 struct asc_board *board = shost_priv(shost);
9091 ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var;
9092 unsigned short warn_code = 0;
9094 asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG;
9095 if (asc_dvc->err_code != 0)
9096 return asc_dvc->err_code;
9098 if (AscFindSignature(asc_dvc->iop_base)) {
9099 AscInitAscDvcVar(asc_dvc);
9100 warn_code = AscInitFromEEP(asc_dvc);
9101 asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG;
9102 if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT)
9103 asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT;
9105 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
9108 switch (warn_code) {
9109 case 0: /* No error */
9111 case ASC_WARN_IO_PORT_ROTATE:
9112 shost_printk(KERN_WARNING, shost, "I/O port address "
9115 case ASC_WARN_AUTO_CONFIG:
9116 shost_printk(KERN_WARNING, shost, "I/O port increment switch "
9119 case ASC_WARN_EEPROM_CHKSUM:
9120 shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n");
9122 case ASC_WARN_IRQ_MODIFIED:
9123 shost_printk(KERN_WARNING, shost, "IRQ modified\n");
9125 case ASC_WARN_CMD_QNG_CONFLICT:
9126 shost_printk(KERN_WARNING, shost, "tag queuing enabled w/o "
9130 shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n",
9135 if (asc_dvc->err_code != 0)
9136 shost_printk(KERN_ERR, shost, "error 0x%x at init_state "
9137 "0x%x\n", asc_dvc->err_code, asc_dvc->init_state);
9139 return asc_dvc->err_code;
9142 static int AscInitSetConfig(struct pci_dev *pdev, struct Scsi_Host *shost)
9144 struct asc_board *board = shost_priv(shost);
9145 ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var;
9146 PortAddr iop_base = asc_dvc->iop_base;
9147 unsigned short cfg_msw;
9148 unsigned short warn_code = 0;
9150 asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG;
9151 if (asc_dvc->err_code != 0)
9152 return asc_dvc->err_code;
9153 if (!AscFindSignature(asc_dvc->iop_base)) {
9154 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
9155 return asc_dvc->err_code;
9158 cfg_msw = AscGetChipCfgMsw(iop_base);
9159 if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) {
9160 cfg_msw &= ~ASC_CFG_MSW_CLR_MASK;
9161 warn_code |= ASC_WARN_CFG_MSW_RECOVER;
9162 AscSetChipCfgMsw(iop_base, cfg_msw);
9164 if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) !=
9165 asc_dvc->cfg->cmd_qng_enabled) {
9166 asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled;
9167 warn_code |= ASC_WARN_CMD_QNG_CONFLICT;
9169 if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) {
9170 warn_code |= ASC_WARN_AUTO_CONFIG;
9173 if (asc_dvc->bus_type & ASC_IS_PCI) {
9175 AscSetChipCfgMsw(iop_base, cfg_msw);
9176 if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) {
9178 if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) ||
9179 (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) {
9180 asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB;
9181 asc_dvc->bug_fix_cntl |=
9182 ASC_BUG_FIX_ASYN_USE_SYN;
9186 #endif /* CONFIG_PCI */
9187 if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) !=
9188 asc_dvc->cfg->chip_scsi_id) {
9189 asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID;
9192 asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG;
9194 switch (warn_code) {
9195 case 0: /* No error. */
9197 case ASC_WARN_IO_PORT_ROTATE:
9198 shost_printk(KERN_WARNING, shost, "I/O port address "
9201 case ASC_WARN_AUTO_CONFIG:
9202 shost_printk(KERN_WARNING, shost, "I/O port increment switch "
9205 case ASC_WARN_EEPROM_CHKSUM:
9206 shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n");
9208 case ASC_WARN_IRQ_MODIFIED:
9209 shost_printk(KERN_WARNING, shost, "IRQ modified\n");
9211 case ASC_WARN_CMD_QNG_CONFLICT:
9212 shost_printk(KERN_WARNING, shost, "tag queuing w/o "
9216 shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n",
9221 if (asc_dvc->err_code != 0)
9222 shost_printk(KERN_ERR, shost, "error 0x%x at init_state "
9223 "0x%x\n", asc_dvc->err_code, asc_dvc->init_state);
9225 return asc_dvc->err_code;
9229 * EEPROM Configuration.
9231 * All drivers should use this structure to set the default EEPROM
9232 * configuration. The BIOS now uses this structure when it is built.
9233 * Additional structure information can be found in a_condor.h where
9234 * the structure is defined.
9236 * The *_Field_IsChar structs are needed to correct for endianness.
9237 * These values are read from the board 16 bits at a time directly
9238 * into the structs. Because some fields are char, the values will be
9239 * in the wrong order. The *_Field_IsChar tells when to flip the
9240 * bytes. Data read and written to PCI memory is automatically swapped
9241 * on big-endian platforms so char fields read as words are actually being
9242 * unswapped on big-endian platforms.
9245 static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config = {
9246 ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */
9247 0x0000, /* cfg_msw */
9248 0xFFFF, /* disc_enable */
9249 0xFFFF, /* wdtr_able */
9250 0xFFFF, /* sdtr_able */
9251 0xFFFF, /* start_motor */
9252 0xFFFF, /* tagqng_able */
9253 0xFFFF, /* bios_scan */
9254 0, /* scam_tolerant */
9255 7, /* adapter_scsi_id */
9256 0, /* bios_boot_delay */
9257 3, /* scsi_reset_delay */
9258 0, /* bios_id_lun */
9259 0, /* termination */
9261 0xFFE7, /* bios_ctrl */
9262 0xFFFF, /* ultra_able */
9264 ASC_DEF_MAX_HOST_QNG, /* max_host_qng */
9265 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
9268 0, /* serial_number_word1 */
9269 0, /* serial_number_word2 */
9270 0, /* serial_number_word3 */
9272 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
9273 , /* oem_name[16] */
9274 0, /* dvc_err_code */
9275 0, /* adv_err_code */
9276 0, /* adv_err_addr */
9277 0, /* saved_dvc_err_code */
9278 0, /* saved_adv_err_code */
9279 0, /* saved_adv_err_addr */
9283 static ADVEEP_3550_CONFIG ADVEEP_3550_Config_Field_IsChar = {
9286 0, /* -disc_enable */
9289 0, /* start_motor */
9290 0, /* tagqng_able */
9292 0, /* scam_tolerant */
9293 1, /* adapter_scsi_id */
9294 1, /* bios_boot_delay */
9295 1, /* scsi_reset_delay */
9296 1, /* bios_id_lun */
9297 1, /* termination */
9302 1, /* max_host_qng */
9303 1, /* max_dvc_qng */
9306 0, /* serial_number_word1 */
9307 0, /* serial_number_word2 */
9308 0, /* serial_number_word3 */
9310 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}
9311 , /* oem_name[16] */
9312 0, /* dvc_err_code */
9313 0, /* adv_err_code */
9314 0, /* adv_err_addr */
9315 0, /* saved_dvc_err_code */
9316 0, /* saved_adv_err_code */
9317 0, /* saved_adv_err_addr */
9321 static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config = {
9322 ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
9323 0x0000, /* 01 cfg_msw */
9324 0xFFFF, /* 02 disc_enable */
9325 0xFFFF, /* 03 wdtr_able */
9326 0x4444, /* 04 sdtr_speed1 */
9327 0xFFFF, /* 05 start_motor */
9328 0xFFFF, /* 06 tagqng_able */
9329 0xFFFF, /* 07 bios_scan */
9330 0, /* 08 scam_tolerant */
9331 7, /* 09 adapter_scsi_id */
9332 0, /* bios_boot_delay */
9333 3, /* 10 scsi_reset_delay */
9334 0, /* bios_id_lun */
9335 0, /* 11 termination_se */
9336 0, /* termination_lvd */
9337 0xFFE7, /* 12 bios_ctrl */
9338 0x4444, /* 13 sdtr_speed2 */
9339 0x4444, /* 14 sdtr_speed3 */
9340 ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */
9341 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
9342 0, /* 16 dvc_cntl */
9343 0x4444, /* 17 sdtr_speed4 */
9344 0, /* 18 serial_number_word1 */
9345 0, /* 19 serial_number_word2 */
9346 0, /* 20 serial_number_word3 */
9347 0, /* 21 check_sum */
9348 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
9349 , /* 22-29 oem_name[16] */
9350 0, /* 30 dvc_err_code */
9351 0, /* 31 adv_err_code */
9352 0, /* 32 adv_err_addr */
9353 0, /* 33 saved_dvc_err_code */
9354 0, /* 34 saved_adv_err_code */
9355 0, /* 35 saved_adv_err_addr */
9356 0, /* 36 reserved */
9357 0, /* 37 reserved */
9358 0, /* 38 reserved */
9359 0, /* 39 reserved */
9360 0, /* 40 reserved */
9361 0, /* 41 reserved */
9362 0, /* 42 reserved */
9363 0, /* 43 reserved */
9364 0, /* 44 reserved */
9365 0, /* 45 reserved */
9366 0, /* 46 reserved */
9367 0, /* 47 reserved */
9368 0, /* 48 reserved */
9369 0, /* 49 reserved */
9370 0, /* 50 reserved */
9371 0, /* 51 reserved */
9372 0, /* 52 reserved */
9373 0, /* 53 reserved */
9374 0, /* 54 reserved */
9375 0, /* 55 reserved */
9376 0, /* 56 cisptr_lsw */
9377 0, /* 57 cisprt_msw */
9378 PCI_VENDOR_ID_ASP, /* 58 subsysvid */
9379 PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */
9380 0, /* 60 reserved */
9381 0, /* 61 reserved */
9382 0, /* 62 reserved */
9386 static ADVEEP_38C0800_CONFIG ADVEEP_38C0800_Config_Field_IsChar = {
9389 0, /* 02 disc_enable */
9390 0, /* 03 wdtr_able */
9391 0, /* 04 sdtr_speed1 */
9392 0, /* 05 start_motor */
9393 0, /* 06 tagqng_able */
9394 0, /* 07 bios_scan */
9395 0, /* 08 scam_tolerant */
9396 1, /* 09 adapter_scsi_id */
9397 1, /* bios_boot_delay */
9398 1, /* 10 scsi_reset_delay */
9399 1, /* bios_id_lun */
9400 1, /* 11 termination_se */
9401 1, /* termination_lvd */
9402 0, /* 12 bios_ctrl */
9403 0, /* 13 sdtr_speed2 */
9404 0, /* 14 sdtr_speed3 */
9405 1, /* 15 max_host_qng */
9406 1, /* max_dvc_qng */
9407 0, /* 16 dvc_cntl */
9408 0, /* 17 sdtr_speed4 */
9409 0, /* 18 serial_number_word1 */
9410 0, /* 19 serial_number_word2 */
9411 0, /* 20 serial_number_word3 */
9412 0, /* 21 check_sum */
9413 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}
9414 , /* 22-29 oem_name[16] */
9415 0, /* 30 dvc_err_code */
9416 0, /* 31 adv_err_code */
9417 0, /* 32 adv_err_addr */
9418 0, /* 33 saved_dvc_err_code */
9419 0, /* 34 saved_adv_err_code */
9420 0, /* 35 saved_adv_err_addr */
9421 0, /* 36 reserved */
9422 0, /* 37 reserved */
9423 0, /* 38 reserved */
9424 0, /* 39 reserved */
9425 0, /* 40 reserved */
9426 0, /* 41 reserved */
9427 0, /* 42 reserved */
9428 0, /* 43 reserved */
9429 0, /* 44 reserved */
9430 0, /* 45 reserved */
9431 0, /* 46 reserved */
9432 0, /* 47 reserved */
9433 0, /* 48 reserved */
9434 0, /* 49 reserved */
9435 0, /* 50 reserved */
9436 0, /* 51 reserved */
9437 0, /* 52 reserved */
9438 0, /* 53 reserved */
9439 0, /* 54 reserved */
9440 0, /* 55 reserved */
9441 0, /* 56 cisptr_lsw */
9442 0, /* 57 cisprt_msw */
9443 0, /* 58 subsysvid */
9444 0, /* 59 subsysid */
9445 0, /* 60 reserved */
9446 0, /* 61 reserved */
9447 0, /* 62 reserved */
9451 static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config = {
9452 ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
9453 0x0000, /* 01 cfg_msw */
9454 0xFFFF, /* 02 disc_enable */
9455 0xFFFF, /* 03 wdtr_able */
9456 0x5555, /* 04 sdtr_speed1 */
9457 0xFFFF, /* 05 start_motor */
9458 0xFFFF, /* 06 tagqng_able */
9459 0xFFFF, /* 07 bios_scan */
9460 0, /* 08 scam_tolerant */
9461 7, /* 09 adapter_scsi_id */
9462 0, /* bios_boot_delay */
9463 3, /* 10 scsi_reset_delay */
9464 0, /* bios_id_lun */
9465 0, /* 11 termination_se */
9466 0, /* termination_lvd */
9467 0xFFE7, /* 12 bios_ctrl */
9468 0x5555, /* 13 sdtr_speed2 */
9469 0x5555, /* 14 sdtr_speed3 */
9470 ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */
9471 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
9472 0, /* 16 dvc_cntl */
9473 0x5555, /* 17 sdtr_speed4 */
9474 0, /* 18 serial_number_word1 */
9475 0, /* 19 serial_number_word2 */
9476 0, /* 20 serial_number_word3 */
9477 0, /* 21 check_sum */
9478 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
9479 , /* 22-29 oem_name[16] */
9480 0, /* 30 dvc_err_code */
9481 0, /* 31 adv_err_code */
9482 0, /* 32 adv_err_addr */
9483 0, /* 33 saved_dvc_err_code */
9484 0, /* 34 saved_adv_err_code */
9485 0, /* 35 saved_adv_err_addr */
9486 0, /* 36 reserved */
9487 0, /* 37 reserved */
9488 0, /* 38 reserved */
9489 0, /* 39 reserved */
9490 0, /* 40 reserved */
9491 0, /* 41 reserved */
9492 0, /* 42 reserved */
9493 0, /* 43 reserved */
9494 0, /* 44 reserved */
9495 0, /* 45 reserved */
9496 0, /* 46 reserved */
9497 0, /* 47 reserved */
9498 0, /* 48 reserved */
9499 0, /* 49 reserved */
9500 0, /* 50 reserved */
9501 0, /* 51 reserved */
9502 0, /* 52 reserved */
9503 0, /* 53 reserved */
9504 0, /* 54 reserved */
9505 0, /* 55 reserved */
9506 0, /* 56 cisptr_lsw */
9507 0, /* 57 cisprt_msw */
9508 PCI_VENDOR_ID_ASP, /* 58 subsysvid */
9509 PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */
9510 0, /* 60 reserved */
9511 0, /* 61 reserved */
9512 0, /* 62 reserved */
9516 static ADVEEP_38C1600_CONFIG ADVEEP_38C1600_Config_Field_IsChar = {
9519 0, /* 02 disc_enable */
9520 0, /* 03 wdtr_able */
9521 0, /* 04 sdtr_speed1 */
9522 0, /* 05 start_motor */
9523 0, /* 06 tagqng_able */
9524 0, /* 07 bios_scan */
9525 0, /* 08 scam_tolerant */
9526 1, /* 09 adapter_scsi_id */
9527 1, /* bios_boot_delay */
9528 1, /* 10 scsi_reset_delay */
9529 1, /* bios_id_lun */
9530 1, /* 11 termination_se */
9531 1, /* termination_lvd */
9532 0, /* 12 bios_ctrl */
9533 0, /* 13 sdtr_speed2 */
9534 0, /* 14 sdtr_speed3 */
9535 1, /* 15 max_host_qng */
9536 1, /* max_dvc_qng */
9537 0, /* 16 dvc_cntl */
9538 0, /* 17 sdtr_speed4 */
9539 0, /* 18 serial_number_word1 */
9540 0, /* 19 serial_number_word2 */
9541 0, /* 20 serial_number_word3 */
9542 0, /* 21 check_sum */
9543 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}
9544 , /* 22-29 oem_name[16] */
9545 0, /* 30 dvc_err_code */
9546 0, /* 31 adv_err_code */
9547 0, /* 32 adv_err_addr */
9548 0, /* 33 saved_dvc_err_code */
9549 0, /* 34 saved_adv_err_code */
9550 0, /* 35 saved_adv_err_addr */
9551 0, /* 36 reserved */
9552 0, /* 37 reserved */
9553 0, /* 38 reserved */
9554 0, /* 39 reserved */
9555 0, /* 40 reserved */
9556 0, /* 41 reserved */
9557 0, /* 42 reserved */
9558 0, /* 43 reserved */
9559 0, /* 44 reserved */
9560 0, /* 45 reserved */
9561 0, /* 46 reserved */
9562 0, /* 47 reserved */
9563 0, /* 48 reserved */
9564 0, /* 49 reserved */
9565 0, /* 50 reserved */
9566 0, /* 51 reserved */
9567 0, /* 52 reserved */
9568 0, /* 53 reserved */
9569 0, /* 54 reserved */
9570 0, /* 55 reserved */
9571 0, /* 56 cisptr_lsw */
9572 0, /* 57 cisprt_msw */
9573 0, /* 58 subsysvid */
9574 0, /* 59 subsysid */
9575 0, /* 60 reserved */
9576 0, /* 61 reserved */
9577 0, /* 62 reserved */
9582 * Wait for EEPROM command to complete
9584 static void AdvWaitEEPCmd(AdvPortAddr iop_base)
9588 for (eep_delay_ms = 0; eep_delay_ms < ADV_EEP_DELAY_MS; eep_delay_ms++) {
9589 if (AdvReadWordRegister(iop_base, IOPW_EE_CMD) &
9595 if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE) ==
9601 * Read the EEPROM from specified location
9603 static ushort AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr)
9605 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9606 ASC_EEP_CMD_READ | eep_word_addr);
9607 AdvWaitEEPCmd(iop_base);
9608 return AdvReadWordRegister(iop_base, IOPW_EE_DATA);
9612 * Write the EEPROM from 'cfg_buf'.
9614 static void AdvSet3550EEPConfig(AdvPortAddr iop_base,
9615 ADVEEP_3550_CONFIG *cfg_buf)
9618 ushort addr, chksum;
9621 wbuf = (ushort *)cfg_buf;
9622 charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar;
9625 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
9626 AdvWaitEEPCmd(iop_base);
9629 * Write EEPROM from word 0 to word 20.
9631 for (addr = ADV_EEP_DVC_CFG_BEGIN;
9632 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) {
9635 if (*charfields++) {
9636 word = cpu_to_le16(*wbuf);
9640 chksum += *wbuf; /* Checksum is calculated from word values. */
9641 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9642 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9643 ASC_EEP_CMD_WRITE | addr);
9644 AdvWaitEEPCmd(iop_base);
9645 mdelay(ADV_EEP_DELAY_MS);
9649 * Write EEPROM checksum at word 21.
9651 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
9652 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
9653 AdvWaitEEPCmd(iop_base);
9658 * Write EEPROM OEM name at words 22 to 29.
9660 for (addr = ADV_EEP_DVC_CTL_BEGIN;
9661 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) {
9664 if (*charfields++) {
9665 word = cpu_to_le16(*wbuf);
9669 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9670 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9671 ASC_EEP_CMD_WRITE | addr);
9672 AdvWaitEEPCmd(iop_base);
9674 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
9675 AdvWaitEEPCmd(iop_base);
9679 * Write the EEPROM from 'cfg_buf'.
9681 static void AdvSet38C0800EEPConfig(AdvPortAddr iop_base,
9682 ADVEEP_38C0800_CONFIG *cfg_buf)
9686 ushort addr, chksum;
9688 wbuf = (ushort *)cfg_buf;
9689 charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar;
9692 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
9693 AdvWaitEEPCmd(iop_base);
9696 * Write EEPROM from word 0 to word 20.
9698 for (addr = ADV_EEP_DVC_CFG_BEGIN;
9699 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) {
9702 if (*charfields++) {
9703 word = cpu_to_le16(*wbuf);
9707 chksum += *wbuf; /* Checksum is calculated from word values. */
9708 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9709 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9710 ASC_EEP_CMD_WRITE | addr);
9711 AdvWaitEEPCmd(iop_base);
9712 mdelay(ADV_EEP_DELAY_MS);
9716 * Write EEPROM checksum at word 21.
9718 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
9719 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
9720 AdvWaitEEPCmd(iop_base);
9725 * Write EEPROM OEM name at words 22 to 29.
9727 for (addr = ADV_EEP_DVC_CTL_BEGIN;
9728 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) {
9731 if (*charfields++) {
9732 word = cpu_to_le16(*wbuf);
9736 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9737 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9738 ASC_EEP_CMD_WRITE | addr);
9739 AdvWaitEEPCmd(iop_base);
9741 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
9742 AdvWaitEEPCmd(iop_base);
9746 * Write the EEPROM from 'cfg_buf'.
9748 static void AdvSet38C1600EEPConfig(AdvPortAddr iop_base,
9749 ADVEEP_38C1600_CONFIG *cfg_buf)
9753 ushort addr, chksum;
9755 wbuf = (ushort *)cfg_buf;
9756 charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar;
9759 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
9760 AdvWaitEEPCmd(iop_base);
9763 * Write EEPROM from word 0 to word 20.
9765 for (addr = ADV_EEP_DVC_CFG_BEGIN;
9766 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) {
9769 if (*charfields++) {
9770 word = cpu_to_le16(*wbuf);
9774 chksum += *wbuf; /* Checksum is calculated from word values. */
9775 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9776 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9777 ASC_EEP_CMD_WRITE | addr);
9778 AdvWaitEEPCmd(iop_base);
9779 mdelay(ADV_EEP_DELAY_MS);
9783 * Write EEPROM checksum at word 21.
9785 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
9786 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
9787 AdvWaitEEPCmd(iop_base);
9792 * Write EEPROM OEM name at words 22 to 29.
9794 for (addr = ADV_EEP_DVC_CTL_BEGIN;
9795 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) {
9798 if (*charfields++) {
9799 word = cpu_to_le16(*wbuf);
9803 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
9804 AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
9805 ASC_EEP_CMD_WRITE | addr);
9806 AdvWaitEEPCmd(iop_base);
9808 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
9809 AdvWaitEEPCmd(iop_base);
9813 * Read EEPROM configuration into the specified buffer.
9815 * Return a checksum based on the EEPROM configuration read.
9817 static ushort AdvGet3550EEPConfig(AdvPortAddr iop_base,
9818 ADVEEP_3550_CONFIG *cfg_buf)
9820 ushort wval, chksum;
9825 charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar;
9826 wbuf = (ushort *)cfg_buf;
9829 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
9830 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) {
9831 wval = AdvReadEEPWord(iop_base, eep_addr);
9832 chksum += wval; /* Checksum is calculated from word values. */
9833 if (*charfields++) {
9834 *wbuf = le16_to_cpu(wval);
9839 /* Read checksum word. */
9840 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9844 /* Read rest of EEPROM not covered by the checksum. */
9845 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
9846 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) {
9847 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9848 if (*charfields++) {
9849 *wbuf = le16_to_cpu(*wbuf);
9856 * Read EEPROM configuration into the specified buffer.
9858 * Return a checksum based on the EEPROM configuration read.
9860 static ushort AdvGet38C0800EEPConfig(AdvPortAddr iop_base,
9861 ADVEEP_38C0800_CONFIG *cfg_buf)
9863 ushort wval, chksum;
9868 charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar;
9869 wbuf = (ushort *)cfg_buf;
9872 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
9873 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) {
9874 wval = AdvReadEEPWord(iop_base, eep_addr);
9875 chksum += wval; /* Checksum is calculated from word values. */
9876 if (*charfields++) {
9877 *wbuf = le16_to_cpu(wval);
9882 /* Read checksum word. */
9883 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9887 /* Read rest of EEPROM not covered by the checksum. */
9888 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
9889 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) {
9890 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9891 if (*charfields++) {
9892 *wbuf = le16_to_cpu(*wbuf);
9899 * Read EEPROM configuration into the specified buffer.
9901 * Return a checksum based on the EEPROM configuration read.
9903 static ushort AdvGet38C1600EEPConfig(AdvPortAddr iop_base,
9904 ADVEEP_38C1600_CONFIG *cfg_buf)
9906 ushort wval, chksum;
9911 charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar;
9912 wbuf = (ushort *)cfg_buf;
9915 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
9916 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) {
9917 wval = AdvReadEEPWord(iop_base, eep_addr);
9918 chksum += wval; /* Checksum is calculated from word values. */
9919 if (*charfields++) {
9920 *wbuf = le16_to_cpu(wval);
9925 /* Read checksum word. */
9926 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9930 /* Read rest of EEPROM not covered by the checksum. */
9931 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
9932 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) {
9933 *wbuf = AdvReadEEPWord(iop_base, eep_addr);
9934 if (*charfields++) {
9935 *wbuf = le16_to_cpu(*wbuf);
9942 * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and
9943 * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while
9944 * all of this is done.
9946 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
9948 * For a non-fatal error return a warning code. If there are no warnings
9949 * then 0 is returned.
9951 * Note: Chip is stopped on entry.
9953 static int AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc)
9955 AdvPortAddr iop_base;
9957 ADVEEP_3550_CONFIG eep_config;
9959 iop_base = asc_dvc->iop_base;
9964 * Read the board's EEPROM configuration.
9966 * Set default values if a bad checksum is found.
9968 if (AdvGet3550EEPConfig(iop_base, &eep_config) != eep_config.check_sum) {
9969 warn_code |= ASC_WARN_EEPROM_CHKSUM;
9972 * Set EEPROM default values.
9974 memcpy(&eep_config, &Default_3550_EEPROM_Config,
9975 sizeof(ADVEEP_3550_CONFIG));
9978 * Assume the 6 byte board serial number that was read from
9979 * EEPROM is correct even if the EEPROM checksum failed.
9981 eep_config.serial_number_word3 =
9982 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
9984 eep_config.serial_number_word2 =
9985 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
9987 eep_config.serial_number_word1 =
9988 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
9990 AdvSet3550EEPConfig(iop_base, &eep_config);
9993 * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the
9994 * EEPROM configuration that was read.
9996 * This is the mapping of EEPROM fields to Adv Library fields.
9998 asc_dvc->wdtr_able = eep_config.wdtr_able;
9999 asc_dvc->sdtr_able = eep_config.sdtr_able;
10000 asc_dvc->ultra_able = eep_config.ultra_able;
10001 asc_dvc->tagqng_able = eep_config.tagqng_able;
10002 asc_dvc->cfg->disc_enable = eep_config.disc_enable;
10003 asc_dvc->max_host_qng = eep_config.max_host_qng;
10004 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10005 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID);
10006 asc_dvc->start_motor = eep_config.start_motor;
10007 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
10008 asc_dvc->bios_ctrl = eep_config.bios_ctrl;
10009 asc_dvc->no_scam = eep_config.scam_tolerant;
10010 asc_dvc->cfg->serial1 = eep_config.serial_number_word1;
10011 asc_dvc->cfg->serial2 = eep_config.serial_number_word2;
10012 asc_dvc->cfg->serial3 = eep_config.serial_number_word3;
10015 * Set the host maximum queuing (max. 253, min. 16) and the per device
10016 * maximum queuing (max. 63, min. 4).
10018 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) {
10019 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10020 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) {
10021 /* If the value is zero, assume it is uninitialized. */
10022 if (eep_config.max_host_qng == 0) {
10023 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10025 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
10029 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) {
10030 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10031 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) {
10032 /* If the value is zero, assume it is uninitialized. */
10033 if (eep_config.max_dvc_qng == 0) {
10034 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10036 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
10041 * If 'max_dvc_qng' is greater than 'max_host_qng', then
10042 * set 'max_dvc_qng' to 'max_host_qng'.
10044 if (eep_config.max_dvc_qng > eep_config.max_host_qng) {
10045 eep_config.max_dvc_qng = eep_config.max_host_qng;
10049 * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng'
10050 * values based on possibly adjusted EEPROM values.
10052 asc_dvc->max_host_qng = eep_config.max_host_qng;
10053 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10056 * If the EEPROM 'termination' field is set to automatic (0), then set
10057 * the ADV_DVC_CFG 'termination' field to automatic also.
10059 * If the termination is specified with a non-zero 'termination'
10060 * value check that a legal value is set and set the ADV_DVC_CFG
10061 * 'termination' field appropriately.
10063 if (eep_config.termination == 0) {
10064 asc_dvc->cfg->termination = 0; /* auto termination */
10066 /* Enable manual control with low off / high off. */
10067 if (eep_config.termination == 1) {
10068 asc_dvc->cfg->termination = TERM_CTL_SEL;
10070 /* Enable manual control with low off / high on. */
10071 } else if (eep_config.termination == 2) {
10072 asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H;
10074 /* Enable manual control with low on / high on. */
10075 } else if (eep_config.termination == 3) {
10076 asc_dvc->cfg->termination =
10077 TERM_CTL_SEL | TERM_CTL_H | TERM_CTL_L;
10080 * The EEPROM 'termination' field contains a bad value. Use
10081 * automatic termination instead.
10083 asc_dvc->cfg->termination = 0;
10084 warn_code |= ASC_WARN_EEPROM_TERMINATION;
10092 * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and
10093 * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while
10094 * all of this is done.
10096 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
10098 * For a non-fatal error return a warning code. If there are no warnings
10099 * then 0 is returned.
10101 * Note: Chip is stopped on entry.
10103 static int AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc)
10105 AdvPortAddr iop_base;
10107 ADVEEP_38C0800_CONFIG eep_config;
10108 uchar tid, termination;
10109 ushort sdtr_speed = 0;
10111 iop_base = asc_dvc->iop_base;
10116 * Read the board's EEPROM configuration.
10118 * Set default values if a bad checksum is found.
10120 if (AdvGet38C0800EEPConfig(iop_base, &eep_config) !=
10121 eep_config.check_sum) {
10122 warn_code |= ASC_WARN_EEPROM_CHKSUM;
10125 * Set EEPROM default values.
10127 memcpy(&eep_config, &Default_38C0800_EEPROM_Config,
10128 sizeof(ADVEEP_38C0800_CONFIG));
10131 * Assume the 6 byte board serial number that was read from
10132 * EEPROM is correct even if the EEPROM checksum failed.
10134 eep_config.serial_number_word3 =
10135 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
10137 eep_config.serial_number_word2 =
10138 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
10140 eep_config.serial_number_word1 =
10141 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
10143 AdvSet38C0800EEPConfig(iop_base, &eep_config);
10146 * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the
10147 * EEPROM configuration that was read.
10149 * This is the mapping of EEPROM fields to Adv Library fields.
10151 asc_dvc->wdtr_able = eep_config.wdtr_able;
10152 asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1;
10153 asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2;
10154 asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3;
10155 asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4;
10156 asc_dvc->tagqng_able = eep_config.tagqng_able;
10157 asc_dvc->cfg->disc_enable = eep_config.disc_enable;
10158 asc_dvc->max_host_qng = eep_config.max_host_qng;
10159 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10160 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID);
10161 asc_dvc->start_motor = eep_config.start_motor;
10162 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
10163 asc_dvc->bios_ctrl = eep_config.bios_ctrl;
10164 asc_dvc->no_scam = eep_config.scam_tolerant;
10165 asc_dvc->cfg->serial1 = eep_config.serial_number_word1;
10166 asc_dvc->cfg->serial2 = eep_config.serial_number_word2;
10167 asc_dvc->cfg->serial3 = eep_config.serial_number_word3;
10170 * For every Target ID if any of its 'sdtr_speed[1234]' bits
10171 * are set, then set an 'sdtr_able' bit for it.
10173 asc_dvc->sdtr_able = 0;
10174 for (tid = 0; tid <= ADV_MAX_TID; tid++) {
10176 sdtr_speed = asc_dvc->sdtr_speed1;
10177 } else if (tid == 4) {
10178 sdtr_speed = asc_dvc->sdtr_speed2;
10179 } else if (tid == 8) {
10180 sdtr_speed = asc_dvc->sdtr_speed3;
10181 } else if (tid == 12) {
10182 sdtr_speed = asc_dvc->sdtr_speed4;
10184 if (sdtr_speed & ADV_MAX_TID) {
10185 asc_dvc->sdtr_able |= (1 << tid);
10191 * Set the host maximum queuing (max. 253, min. 16) and the per device
10192 * maximum queuing (max. 63, min. 4).
10194 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) {
10195 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10196 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) {
10197 /* If the value is zero, assume it is uninitialized. */
10198 if (eep_config.max_host_qng == 0) {
10199 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10201 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
10205 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) {
10206 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10207 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) {
10208 /* If the value is zero, assume it is uninitialized. */
10209 if (eep_config.max_dvc_qng == 0) {
10210 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10212 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
10217 * If 'max_dvc_qng' is greater than 'max_host_qng', then
10218 * set 'max_dvc_qng' to 'max_host_qng'.
10220 if (eep_config.max_dvc_qng > eep_config.max_host_qng) {
10221 eep_config.max_dvc_qng = eep_config.max_host_qng;
10225 * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng'
10226 * values based on possibly adjusted EEPROM values.
10228 asc_dvc->max_host_qng = eep_config.max_host_qng;
10229 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10232 * If the EEPROM 'termination' field is set to automatic (0), then set
10233 * the ADV_DVC_CFG 'termination' field to automatic also.
10235 * If the termination is specified with a non-zero 'termination'
10236 * value check that a legal value is set and set the ADV_DVC_CFG
10237 * 'termination' field appropriately.
10239 if (eep_config.termination_se == 0) {
10240 termination = 0; /* auto termination for SE */
10242 /* Enable manual control with low off / high off. */
10243 if (eep_config.termination_se == 1) {
10246 /* Enable manual control with low off / high on. */
10247 } else if (eep_config.termination_se == 2) {
10248 termination = TERM_SE_HI;
10250 /* Enable manual control with low on / high on. */
10251 } else if (eep_config.termination_se == 3) {
10252 termination = TERM_SE;
10255 * The EEPROM 'termination_se' field contains a bad value.
10256 * Use automatic termination instead.
10259 warn_code |= ASC_WARN_EEPROM_TERMINATION;
10263 if (eep_config.termination_lvd == 0) {
10264 asc_dvc->cfg->termination = termination; /* auto termination for LVD */
10266 /* Enable manual control with low off / high off. */
10267 if (eep_config.termination_lvd == 1) {
10268 asc_dvc->cfg->termination = termination;
10270 /* Enable manual control with low off / high on. */
10271 } else if (eep_config.termination_lvd == 2) {
10272 asc_dvc->cfg->termination = termination | TERM_LVD_HI;
10274 /* Enable manual control with low on / high on. */
10275 } else if (eep_config.termination_lvd == 3) {
10276 asc_dvc->cfg->termination = termination | TERM_LVD;
10279 * The EEPROM 'termination_lvd' field contains a bad value.
10280 * Use automatic termination instead.
10282 asc_dvc->cfg->termination = termination;
10283 warn_code |= ASC_WARN_EEPROM_TERMINATION;
10291 * Read the board's EEPROM configuration. Set fields in ASC_DVC_VAR and
10292 * ASC_DVC_CFG based on the EEPROM settings. The chip is stopped while
10293 * all of this is done.
10295 * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR.
10297 * For a non-fatal error return a warning code. If there are no warnings
10298 * then 0 is returned.
10300 * Note: Chip is stopped on entry.
10302 static int AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc)
10304 AdvPortAddr iop_base;
10306 ADVEEP_38C1600_CONFIG eep_config;
10307 uchar tid, termination;
10308 ushort sdtr_speed = 0;
10310 iop_base = asc_dvc->iop_base;
10315 * Read the board's EEPROM configuration.
10317 * Set default values if a bad checksum is found.
10319 if (AdvGet38C1600EEPConfig(iop_base, &eep_config) !=
10320 eep_config.check_sum) {
10321 struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc);
10322 warn_code |= ASC_WARN_EEPROM_CHKSUM;
10325 * Set EEPROM default values.
10327 memcpy(&eep_config, &Default_38C1600_EEPROM_Config,
10328 sizeof(ADVEEP_38C1600_CONFIG));
10330 if (PCI_FUNC(pdev->devfn) != 0) {
10333 * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60
10334 * and old Mac system booting problem. The Expansion
10335 * ROM must be disabled in Function 1 for these systems
10337 eep_config.cfg_lsw &= ~ADV_EEPROM_BIOS_ENABLE;
10339 * Clear the INTAB (bit 11) if the GPIO 0 input
10340 * indicates the Function 1 interrupt line is wired
10343 * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input:
10344 * 1 - Function 1 interrupt line wired to INT A.
10345 * 0 - Function 1 interrupt line wired to INT B.
10347 * Note: Function 0 is always wired to INTA.
10348 * Put all 5 GPIO bits in input mode and then read
10349 * their input values.
10351 AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0);
10352 ints = AdvReadByteRegister(iop_base, IOPB_GPIO_DATA);
10353 if ((ints & 0x01) == 0)
10354 eep_config.cfg_lsw &= ~ADV_EEPROM_INTAB;
10358 * Assume the 6 byte board serial number that was read from
10359 * EEPROM is correct even if the EEPROM checksum failed.
10361 eep_config.serial_number_word3 =
10362 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
10363 eep_config.serial_number_word2 =
10364 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
10365 eep_config.serial_number_word1 =
10366 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
10368 AdvSet38C1600EEPConfig(iop_base, &eep_config);
10372 * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the
10373 * EEPROM configuration that was read.
10375 * This is the mapping of EEPROM fields to Adv Library fields.
10377 asc_dvc->wdtr_able = eep_config.wdtr_able;
10378 asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1;
10379 asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2;
10380 asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3;
10381 asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4;
10382 asc_dvc->ppr_able = 0;
10383 asc_dvc->tagqng_able = eep_config.tagqng_able;
10384 asc_dvc->cfg->disc_enable = eep_config.disc_enable;
10385 asc_dvc->max_host_qng = eep_config.max_host_qng;
10386 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10387 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ASC_MAX_TID);
10388 asc_dvc->start_motor = eep_config.start_motor;
10389 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
10390 asc_dvc->bios_ctrl = eep_config.bios_ctrl;
10391 asc_dvc->no_scam = eep_config.scam_tolerant;
10394 * For every Target ID if any of its 'sdtr_speed[1234]' bits
10395 * are set, then set an 'sdtr_able' bit for it.
10397 asc_dvc->sdtr_able = 0;
10398 for (tid = 0; tid <= ASC_MAX_TID; tid++) {
10400 sdtr_speed = asc_dvc->sdtr_speed1;
10401 } else if (tid == 4) {
10402 sdtr_speed = asc_dvc->sdtr_speed2;
10403 } else if (tid == 8) {
10404 sdtr_speed = asc_dvc->sdtr_speed3;
10405 } else if (tid == 12) {
10406 sdtr_speed = asc_dvc->sdtr_speed4;
10408 if (sdtr_speed & ASC_MAX_TID) {
10409 asc_dvc->sdtr_able |= (1 << tid);
10415 * Set the host maximum queuing (max. 253, min. 16) and the per device
10416 * maximum queuing (max. 63, min. 4).
10418 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) {
10419 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10420 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) {
10421 /* If the value is zero, assume it is uninitialized. */
10422 if (eep_config.max_host_qng == 0) {
10423 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
10425 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
10429 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) {
10430 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10431 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) {
10432 /* If the value is zero, assume it is uninitialized. */
10433 if (eep_config.max_dvc_qng == 0) {
10434 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
10436 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
10441 * If 'max_dvc_qng' is greater than 'max_host_qng', then
10442 * set 'max_dvc_qng' to 'max_host_qng'.
10444 if (eep_config.max_dvc_qng > eep_config.max_host_qng) {
10445 eep_config.max_dvc_qng = eep_config.max_host_qng;
10449 * Set ASC_DVC_VAR 'max_host_qng' and ASC_DVC_VAR 'max_dvc_qng'
10450 * values based on possibly adjusted EEPROM values.
10452 asc_dvc->max_host_qng = eep_config.max_host_qng;
10453 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
10456 * If the EEPROM 'termination' field is set to automatic (0), then set
10457 * the ASC_DVC_CFG 'termination' field to automatic also.
10459 * If the termination is specified with a non-zero 'termination'
10460 * value check that a legal value is set and set the ASC_DVC_CFG
10461 * 'termination' field appropriately.
10463 if (eep_config.termination_se == 0) {
10464 termination = 0; /* auto termination for SE */
10466 /* Enable manual control with low off / high off. */
10467 if (eep_config.termination_se == 1) {
10470 /* Enable manual control with low off / high on. */
10471 } else if (eep_config.termination_se == 2) {
10472 termination = TERM_SE_HI;
10474 /* Enable manual control with low on / high on. */
10475 } else if (eep_config.termination_se == 3) {
10476 termination = TERM_SE;
10479 * The EEPROM 'termination_se' field contains a bad value.
10480 * Use automatic termination instead.
10483 warn_code |= ASC_WARN_EEPROM_TERMINATION;
10487 if (eep_config.termination_lvd == 0) {
10488 asc_dvc->cfg->termination = termination; /* auto termination for LVD */
10490 /* Enable manual control with low off / high off. */
10491 if (eep_config.termination_lvd == 1) {
10492 asc_dvc->cfg->termination = termination;
10494 /* Enable manual control with low off / high on. */
10495 } else if (eep_config.termination_lvd == 2) {
10496 asc_dvc->cfg->termination = termination | TERM_LVD_HI;
10498 /* Enable manual control with low on / high on. */
10499 } else if (eep_config.termination_lvd == 3) {
10500 asc_dvc->cfg->termination = termination | TERM_LVD;
10503 * The EEPROM 'termination_lvd' field contains a bad value.
10504 * Use automatic termination instead.
10506 asc_dvc->cfg->termination = termination;
10507 warn_code |= ASC_WARN_EEPROM_TERMINATION;
10515 * Initialize the ADV_DVC_VAR structure.
10517 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
10519 * For a non-fatal error return a warning code. If there are no warnings
10520 * then 0 is returned.
10522 static int AdvInitGetConfig(struct pci_dev *pdev, struct Scsi_Host *shost)
10524 struct asc_board *board = shost_priv(shost);
10525 ADV_DVC_VAR *asc_dvc = &board->dvc_var.adv_dvc_var;
10526 unsigned short warn_code = 0;
10527 AdvPortAddr iop_base = asc_dvc->iop_base;
10531 asc_dvc->err_code = 0;
10534 * Save the state of the PCI Configuration Command Register
10535 * "Parity Error Response Control" Bit. If the bit is clear (0),
10536 * in AdvInitAsc3550/38C0800Driver() tell the microcode to ignore
10537 * DMA parity errors.
10539 asc_dvc->cfg->control_flag = 0;
10540 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
10541 if ((cmd & PCI_COMMAND_PARITY) == 0)
10542 asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR;
10544 asc_dvc->cfg->chip_version =
10545 AdvGetChipVersion(iop_base, asc_dvc->bus_type);
10547 ASC_DBG(1, "iopb_chip_id_1: 0x%x 0x%x\n",
10548 (ushort)AdvReadByteRegister(iop_base, IOPB_CHIP_ID_1),
10549 (ushort)ADV_CHIP_ID_BYTE);
10551 ASC_DBG(1, "iopw_chip_id_0: 0x%x 0x%x\n",
10552 (ushort)AdvReadWordRegister(iop_base, IOPW_CHIP_ID_0),
10553 (ushort)ADV_CHIP_ID_WORD);
10556 * Reset the chip to start and allow register writes.
10558 if (AdvFindSignature(iop_base) == 0) {
10559 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
10563 * The caller must set 'chip_type' to a valid setting.
10565 if (asc_dvc->chip_type != ADV_CHIP_ASC3550 &&
10566 asc_dvc->chip_type != ADV_CHIP_ASC38C0800 &&
10567 asc_dvc->chip_type != ADV_CHIP_ASC38C1600) {
10568 asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE;
10575 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG,
10576 ADV_CTRL_REG_CMD_RESET);
10578 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG,
10579 ADV_CTRL_REG_CMD_WR_IO_REG);
10581 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) {
10582 status = AdvInitFrom38C1600EEP(asc_dvc);
10583 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) {
10584 status = AdvInitFrom38C0800EEP(asc_dvc);
10586 status = AdvInitFrom3550EEP(asc_dvc);
10588 warn_code |= status;
10591 if (warn_code != 0)
10592 shost_printk(KERN_WARNING, shost, "warning: 0x%x\n", warn_code);
10594 if (asc_dvc->err_code)
10595 shost_printk(KERN_ERR, shost, "error code 0x%x\n",
10596 asc_dvc->err_code);
10598 return asc_dvc->err_code;
10602 static struct scsi_host_template advansys_template = {
10603 .proc_name = DRV_NAME,
10604 #ifdef CONFIG_PROC_FS
10605 .show_info = advansys_show_info,
10608 .info = advansys_info,
10609 .queuecommand = advansys_queuecommand,
10610 .eh_host_reset_handler = advansys_reset,
10611 .bios_param = advansys_biosparam,
10612 .slave_configure = advansys_slave_configure,
10615 static int advansys_wide_init_chip(struct Scsi_Host *shost)
10617 struct asc_board *board = shost_priv(shost);
10618 struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
10619 size_t sgblk_pool_size;
10620 int warn_code, err_code;
10623 * Allocate buffer carrier structures. The total size
10624 * is about 8 KB, so allocate all at once.
10626 adv_dvc->carrier = dma_alloc_coherent(board->dev,
10627 ADV_CARRIER_BUFSIZE, &adv_dvc->carrier_addr, GFP_KERNEL);
10628 ASC_DBG(1, "carrier 0x%p\n", adv_dvc->carrier);
10630 if (!adv_dvc->carrier)
10631 goto kmalloc_failed;
10634 * Allocate up to 'max_host_qng' request structures for the Wide
10635 * board. The total size is about 16 KB, so allocate all at once.
10636 * If the allocation fails decrement and try again.
10638 board->adv_reqp_size = adv_dvc->max_host_qng * sizeof(adv_req_t);
10639 if (board->adv_reqp_size & 0x1f) {
10640 ASC_DBG(1, "unaligned reqp %lu bytes\n", sizeof(adv_req_t));
10641 board->adv_reqp_size = ADV_32BALIGN(board->adv_reqp_size);
10643 board->adv_reqp = dma_alloc_coherent(board->dev, board->adv_reqp_size,
10644 &board->adv_reqp_addr, GFP_KERNEL);
10646 if (!board->adv_reqp)
10647 goto kmalloc_failed;
10649 ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", board->adv_reqp,
10650 adv_dvc->max_host_qng, board->adv_reqp_size);
10653 * Allocate up to ADV_TOT_SG_BLOCK request structures for
10654 * the Wide board. Each structure is about 136 bytes.
10656 sgblk_pool_size = sizeof(adv_sgblk_t) * ADV_TOT_SG_BLOCK;
10657 board->adv_sgblk_pool = dma_pool_create("adv_sgblk", board->dev,
10658 sgblk_pool_size, 32, 0);
10660 ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", ADV_TOT_SG_BLOCK,
10661 sizeof(adv_sgblk_t), sgblk_pool_size);
10663 if (!board->adv_sgblk_pool)
10664 goto kmalloc_failed;
10666 if (adv_dvc->chip_type == ADV_CHIP_ASC3550) {
10667 ASC_DBG(2, "AdvInitAsc3550Driver()\n");
10668 warn_code = AdvInitAsc3550Driver(adv_dvc);
10669 } else if (adv_dvc->chip_type == ADV_CHIP_ASC38C0800) {
10670 ASC_DBG(2, "AdvInitAsc38C0800Driver()\n");
10671 warn_code = AdvInitAsc38C0800Driver(adv_dvc);
10673 ASC_DBG(2, "AdvInitAsc38C1600Driver()\n");
10674 warn_code = AdvInitAsc38C1600Driver(adv_dvc);
10676 err_code = adv_dvc->err_code;
10678 if (warn_code || err_code) {
10679 shost_printk(KERN_WARNING, shost, "error: warn 0x%x, error "
10680 "0x%x\n", warn_code, err_code);
10686 shost_printk(KERN_ERR, shost, "error: kmalloc() failed\n");
10687 err_code = ADV_ERROR;
10692 static void advansys_wide_free_mem(struct asc_board *board)
10694 struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
10696 if (adv_dvc->carrier) {
10697 dma_free_coherent(board->dev, ADV_CARRIER_BUFSIZE,
10698 adv_dvc->carrier, adv_dvc->carrier_addr);
10699 adv_dvc->carrier = NULL;
10701 if (board->adv_reqp) {
10702 dma_free_coherent(board->dev, board->adv_reqp_size,
10703 board->adv_reqp, board->adv_reqp_addr);
10704 board->adv_reqp = NULL;
10706 if (board->adv_sgblk_pool) {
10707 dma_pool_destroy(board->adv_sgblk_pool);
10708 board->adv_sgblk_pool = NULL;
10712 static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
10715 struct pci_dev *pdev;
10716 struct asc_board *boardp = shost_priv(shost);
10717 ASC_DVC_VAR *asc_dvc_varp = NULL;
10718 ADV_DVC_VAR *adv_dvc_varp = NULL;
10719 int share_irq, warn_code, ret;
10721 pdev = (bus_type == ASC_IS_PCI) ? to_pci_dev(boardp->dev) : NULL;
10723 if (ASC_NARROW_BOARD(boardp)) {
10724 ASC_DBG(1, "narrow board\n");
10725 asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
10726 asc_dvc_varp->bus_type = bus_type;
10727 asc_dvc_varp->drv_ptr = boardp;
10728 asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg;
10729 asc_dvc_varp->iop_base = iop;
10732 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
10733 adv_dvc_varp->drv_ptr = boardp;
10734 adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg;
10735 if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW) {
10736 ASC_DBG(1, "wide board ASC-3550\n");
10737 adv_dvc_varp->chip_type = ADV_CHIP_ASC3550;
10738 } else if (pdev->device == PCI_DEVICE_ID_38C0800_REV1) {
10739 ASC_DBG(1, "wide board ASC-38C0800\n");
10740 adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800;
10742 ASC_DBG(1, "wide board ASC-38C1600\n");
10743 adv_dvc_varp->chip_type = ADV_CHIP_ASC38C1600;
10746 boardp->asc_n_io_port = pci_resource_len(pdev, 1);
10747 boardp->ioremap_addr = pci_ioremap_bar(pdev, 1);
10748 if (!boardp->ioremap_addr) {
10749 shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) "
10751 (long)pci_resource_start(pdev, 1),
10752 boardp->asc_n_io_port);
10756 adv_dvc_varp->iop_base = (AdvPortAddr)boardp->ioremap_addr;
10757 ASC_DBG(1, "iop_base: 0x%p\n", adv_dvc_varp->iop_base);
10760 * Even though it isn't used to access wide boards, other
10761 * than for the debug line below, save I/O Port address so
10762 * that it can be reported.
10764 boardp->ioport = iop;
10766 ASC_DBG(1, "iopb_chip_id_1 0x%x, iopw_chip_id_0 0x%x\n",
10767 (ushort)inp(iop + 1), (ushort)inpw(iop));
10768 #endif /* CONFIG_PCI */
10771 if (ASC_NARROW_BOARD(boardp)) {
10773 * Set the board bus type and PCI IRQ before
10774 * calling AscInitGetConfig().
10776 switch (asc_dvc_varp->bus_type) {
10782 share_irq = IRQF_SHARED;
10784 #endif /* CONFIG_ISA */
10787 share_irq = IRQF_SHARED;
10789 #endif /* CONFIG_PCI */
10791 shost_printk(KERN_ERR, shost, "unknown adapter type: "
10792 "%d\n", asc_dvc_varp->bus_type);
10798 * NOTE: AscInitGetConfig() may change the board's
10799 * bus_type value. The bus_type value should no
10800 * longer be used. If the bus_type field must be
10801 * referenced only use the bit-wise AND operator "&".
10803 ASC_DBG(2, "AscInitGetConfig()\n");
10804 ret = AscInitGetConfig(shost) ? -ENODEV : 0;
10808 * For Wide boards set PCI information before calling
10809 * AdvInitGetConfig().
10811 share_irq = IRQF_SHARED;
10812 ASC_DBG(2, "AdvInitGetConfig()\n");
10814 ret = AdvInitGetConfig(pdev, shost) ? -ENODEV : 0;
10818 #endif /* CONFIG_PCI */
10825 * Save the EEPROM configuration so that it can be displayed
10826 * from /proc/scsi/advansys/[0...].
10828 if (ASC_NARROW_BOARD(boardp)) {
10833 * Set the adapter's target id bit in the 'init_tidmask' field.
10835 boardp->init_tidmask |=
10836 ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id);
10839 * Save EEPROM settings for the board.
10841 ep = &boardp->eep_config.asc_eep;
10843 ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable;
10844 ep->disc_enable = asc_dvc_varp->cfg->disc_enable;
10845 ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled;
10846 ASC_EEP_SET_DMA_SPD(ep, ASC_DEF_ISA_DMA_SPEED);
10847 ep->start_motor = asc_dvc_varp->start_motor;
10848 ep->cntl = asc_dvc_varp->dvc_cntl;
10849 ep->no_scam = asc_dvc_varp->no_scam;
10850 ep->max_total_qng = asc_dvc_varp->max_total_qng;
10851 ASC_EEP_SET_CHIP_ID(ep, asc_dvc_varp->cfg->chip_scsi_id);
10852 /* 'max_tag_qng' is set to the same value for every device. */
10853 ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0];
10854 ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0];
10855 ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1];
10856 ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2];
10857 ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3];
10858 ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4];
10859 ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5];
10862 * Modify board configuration.
10864 ASC_DBG(2, "AscInitSetConfig()\n");
10865 ret = AscInitSetConfig(pdev, shost) ? -ENODEV : 0;
10869 ADVEEP_3550_CONFIG *ep_3550;
10870 ADVEEP_38C0800_CONFIG *ep_38C0800;
10871 ADVEEP_38C1600_CONFIG *ep_38C1600;
10874 * Save Wide EEP Configuration Information.
10876 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
10877 ep_3550 = &boardp->eep_config.adv_3550_eep;
10879 ep_3550->adapter_scsi_id = adv_dvc_varp->chip_scsi_id;
10880 ep_3550->max_host_qng = adv_dvc_varp->max_host_qng;
10881 ep_3550->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
10882 ep_3550->termination = adv_dvc_varp->cfg->termination;
10883 ep_3550->disc_enable = adv_dvc_varp->cfg->disc_enable;
10884 ep_3550->bios_ctrl = adv_dvc_varp->bios_ctrl;
10885 ep_3550->wdtr_able = adv_dvc_varp->wdtr_able;
10886 ep_3550->sdtr_able = adv_dvc_varp->sdtr_able;
10887 ep_3550->ultra_able = adv_dvc_varp->ultra_able;
10888 ep_3550->tagqng_able = adv_dvc_varp->tagqng_able;
10889 ep_3550->start_motor = adv_dvc_varp->start_motor;
10890 ep_3550->scsi_reset_delay =
10891 adv_dvc_varp->scsi_reset_wait;
10892 ep_3550->serial_number_word1 =
10893 adv_dvc_varp->cfg->serial1;
10894 ep_3550->serial_number_word2 =
10895 adv_dvc_varp->cfg->serial2;
10896 ep_3550->serial_number_word3 =
10897 adv_dvc_varp->cfg->serial3;
10898 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
10899 ep_38C0800 = &boardp->eep_config.adv_38C0800_eep;
10901 ep_38C0800->adapter_scsi_id =
10902 adv_dvc_varp->chip_scsi_id;
10903 ep_38C0800->max_host_qng = adv_dvc_varp->max_host_qng;
10904 ep_38C0800->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
10905 ep_38C0800->termination_lvd =
10906 adv_dvc_varp->cfg->termination;
10907 ep_38C0800->disc_enable =
10908 adv_dvc_varp->cfg->disc_enable;
10909 ep_38C0800->bios_ctrl = adv_dvc_varp->bios_ctrl;
10910 ep_38C0800->wdtr_able = adv_dvc_varp->wdtr_able;
10911 ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able;
10912 ep_38C0800->sdtr_speed1 = adv_dvc_varp->sdtr_speed1;
10913 ep_38C0800->sdtr_speed2 = adv_dvc_varp->sdtr_speed2;
10914 ep_38C0800->sdtr_speed3 = adv_dvc_varp->sdtr_speed3;
10915 ep_38C0800->sdtr_speed4 = adv_dvc_varp->sdtr_speed4;
10916 ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able;
10917 ep_38C0800->start_motor = adv_dvc_varp->start_motor;
10918 ep_38C0800->scsi_reset_delay =
10919 adv_dvc_varp->scsi_reset_wait;
10920 ep_38C0800->serial_number_word1 =
10921 adv_dvc_varp->cfg->serial1;
10922 ep_38C0800->serial_number_word2 =
10923 adv_dvc_varp->cfg->serial2;
10924 ep_38C0800->serial_number_word3 =
10925 adv_dvc_varp->cfg->serial3;
10927 ep_38C1600 = &boardp->eep_config.adv_38C1600_eep;
10929 ep_38C1600->adapter_scsi_id =
10930 adv_dvc_varp->chip_scsi_id;
10931 ep_38C1600->max_host_qng = adv_dvc_varp->max_host_qng;
10932 ep_38C1600->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
10933 ep_38C1600->termination_lvd =
10934 adv_dvc_varp->cfg->termination;
10935 ep_38C1600->disc_enable =
10936 adv_dvc_varp->cfg->disc_enable;
10937 ep_38C1600->bios_ctrl = adv_dvc_varp->bios_ctrl;
10938 ep_38C1600->wdtr_able = adv_dvc_varp->wdtr_able;
10939 ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able;
10940 ep_38C1600->sdtr_speed1 = adv_dvc_varp->sdtr_speed1;
10941 ep_38C1600->sdtr_speed2 = adv_dvc_varp->sdtr_speed2;
10942 ep_38C1600->sdtr_speed3 = adv_dvc_varp->sdtr_speed3;
10943 ep_38C1600->sdtr_speed4 = adv_dvc_varp->sdtr_speed4;
10944 ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able;
10945 ep_38C1600->start_motor = adv_dvc_varp->start_motor;
10946 ep_38C1600->scsi_reset_delay =
10947 adv_dvc_varp->scsi_reset_wait;
10948 ep_38C1600->serial_number_word1 =
10949 adv_dvc_varp->cfg->serial1;
10950 ep_38C1600->serial_number_word2 =
10951 adv_dvc_varp->cfg->serial2;
10952 ep_38C1600->serial_number_word3 =
10953 adv_dvc_varp->cfg->serial3;
10957 * Set the adapter's target id bit in the 'init_tidmask' field.
10959 boardp->init_tidmask |=
10960 ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id);
10964 * Channels are numbered beginning with 0. For AdvanSys one host
10965 * structure supports one channel. Multi-channel boards have a
10966 * separate host structure for each channel.
10968 shost->max_channel = 0;
10969 if (ASC_NARROW_BOARD(boardp)) {
10970 shost->max_id = ASC_MAX_TID + 1;
10971 shost->max_lun = ASC_MAX_LUN + 1;
10972 shost->max_cmd_len = ASC_MAX_CDB_LEN;
10974 shost->io_port = asc_dvc_varp->iop_base;
10975 boardp->asc_n_io_port = ASC_IOADR_GAP;
10976 shost->this_id = asc_dvc_varp->cfg->chip_scsi_id;
10978 /* Set maximum number of queues the adapter can handle. */
10979 shost->can_queue = asc_dvc_varp->max_total_qng;
10981 shost->max_id = ADV_MAX_TID + 1;
10982 shost->max_lun = ADV_MAX_LUN + 1;
10983 shost->max_cmd_len = ADV_MAX_CDB_LEN;
10986 * Save the I/O Port address and length even though
10987 * I/O ports are not used to access Wide boards.
10988 * Instead the Wide boards are accessed with
10989 * PCI Memory Mapped I/O.
10991 shost->io_port = iop;
10993 shost->this_id = adv_dvc_varp->chip_scsi_id;
10995 /* Set maximum number of queues the adapter can handle. */
10996 shost->can_queue = adv_dvc_varp->max_host_qng;
11000 * Set the maximum number of scatter-gather elements the
11001 * adapter can handle.
11003 if (ASC_NARROW_BOARD(boardp)) {
11005 * Allow two commands with 'sg_tablesize' scatter-gather
11006 * elements to be executed simultaneously. This value is
11007 * the theoretical hardware limit. It may be decreased
11010 shost->sg_tablesize =
11011 (((asc_dvc_varp->max_total_qng - 2) / 2) *
11012 ASC_SG_LIST_PER_Q) + 1;
11014 shost->sg_tablesize = ADV_MAX_SG_LIST;
11018 * The value of 'sg_tablesize' can not exceed the SCSI
11019 * mid-level driver definition of SG_ALL. SG_ALL also
11020 * must not be exceeded, because it is used to define the
11021 * size of the scatter-gather table in 'struct asc_sg_head'.
11023 if (shost->sg_tablesize > SG_ALL) {
11024 shost->sg_tablesize = SG_ALL;
11027 ASC_DBG(1, "sg_tablesize: %d\n", shost->sg_tablesize);
11029 /* BIOS start address. */
11030 if (ASC_NARROW_BOARD(boardp)) {
11031 shost->base = AscGetChipBiosAddress(asc_dvc_varp->iop_base,
11032 asc_dvc_varp->bus_type);
11035 * Fill-in BIOS board variables. The Wide BIOS saves
11036 * information in LRAM that is used by the driver.
11038 AdvReadWordLram(adv_dvc_varp->iop_base,
11039 BIOS_SIGNATURE, boardp->bios_signature);
11040 AdvReadWordLram(adv_dvc_varp->iop_base,
11041 BIOS_VERSION, boardp->bios_version);
11042 AdvReadWordLram(adv_dvc_varp->iop_base,
11043 BIOS_CODESEG, boardp->bios_codeseg);
11044 AdvReadWordLram(adv_dvc_varp->iop_base,
11045 BIOS_CODELEN, boardp->bios_codelen);
11047 ASC_DBG(1, "bios_signature 0x%x, bios_version 0x%x\n",
11048 boardp->bios_signature, boardp->bios_version);
11050 ASC_DBG(1, "bios_codeseg 0x%x, bios_codelen 0x%x\n",
11051 boardp->bios_codeseg, boardp->bios_codelen);
11054 * If the BIOS saved a valid signature, then fill in
11055 * the BIOS code segment base address.
11057 if (boardp->bios_signature == 0x55AA) {
11059 * Convert x86 realmode code segment to a linear
11060 * address by shifting left 4.
11062 shost->base = ((ulong)boardp->bios_codeseg << 4);
11069 * Register Board Resources - I/O Port, DMA, IRQ
11072 /* Register DMA Channel for Narrow boards. */
11073 shost->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */
11075 /* Register IRQ Number. */
11076 ASC_DBG(2, "request_irq(%d, %p)\n", boardp->irq, shost);
11078 ret = request_irq(boardp->irq, advansys_interrupt, share_irq,
11082 if (ret == -EBUSY) {
11083 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x "
11084 "already in use\n", boardp->irq);
11085 } else if (ret == -EINVAL) {
11086 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x "
11087 "not valid\n", boardp->irq);
11089 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x "
11090 "failed with %d\n", boardp->irq, ret);
11096 * Initialize board RISC chip and enable interrupts.
11098 if (ASC_NARROW_BOARD(boardp)) {
11099 ASC_DBG(2, "AscInitAsc1000Driver()\n");
11101 asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL);
11102 if (!asc_dvc_varp->overrun_buf) {
11106 warn_code = AscInitAsc1000Driver(asc_dvc_varp);
11108 if (warn_code || asc_dvc_varp->err_code) {
11109 shost_printk(KERN_ERR, shost, "error: init_state 0x%x, "
11110 "warn 0x%x, error 0x%x\n",
11111 asc_dvc_varp->init_state, warn_code,
11112 asc_dvc_varp->err_code);
11113 if (!asc_dvc_varp->overrun_dma) {
11119 if (advansys_wide_init_chip(shost)) {
11125 ASC_DBG_PRT_SCSI_HOST(2, shost);
11127 ret = scsi_add_host(shost, boardp->dev);
11131 scsi_scan_host(shost);
11135 if (ASC_NARROW_BOARD(boardp)) {
11136 if (asc_dvc_varp->overrun_dma)
11137 dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma,
11138 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
11139 kfree(asc_dvc_varp->overrun_buf);
11141 advansys_wide_free_mem(boardp);
11143 free_irq(boardp->irq, shost);
11145 if (boardp->ioremap_addr)
11146 iounmap(boardp->ioremap_addr);
11154 * advansys_release()
11156 * Release resources allocated for a single AdvanSys adapter.
11158 static int advansys_release(struct Scsi_Host *shost)
11160 struct asc_board *board = shost_priv(shost);
11161 ASC_DBG(1, "begin\n");
11162 scsi_remove_host(shost);
11163 free_irq(board->irq, shost);
11165 if (ASC_NARROW_BOARD(board)) {
11166 dma_unmap_single(board->dev,
11167 board->dvc_var.asc_dvc_var.overrun_dma,
11168 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
11169 kfree(board->dvc_var.asc_dvc_var.overrun_buf);
11171 iounmap(board->ioremap_addr);
11172 advansys_wide_free_mem(board);
11174 scsi_host_put(shost);
11175 ASC_DBG(1, "end\n");
11179 #define ASC_IOADR_TABLE_MAX_IX 11
11181 static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] = {
11182 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190,
11183 0x0210, 0x0230, 0x0250, 0x0330
11186 static void advansys_vlb_remove(struct device *dev, unsigned int id)
11188 int ioport = _asc_def_iop_base[id];
11189 advansys_release(dev_get_drvdata(dev));
11190 release_region(ioport, ASC_IOADR_GAP);
11194 * The VLB IRQ number is found in bits 2 to 4 of the CfgLsw. It decodes as:
11204 static unsigned int advansys_vlb_irq_no(PortAddr iop_base)
11206 unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base);
11207 unsigned int chip_irq = ((cfg_lsw >> 2) & 0x07) + 9;
11208 if ((chip_irq < 10) || (chip_irq == 13) || (chip_irq > 15))
11213 static int advansys_vlb_probe(struct device *dev, unsigned int id)
11216 PortAddr iop_base = _asc_def_iop_base[id];
11217 struct Scsi_Host *shost;
11218 struct asc_board *board;
11220 if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) {
11221 ASC_DBG(1, "I/O port 0x%x busy\n", iop_base);
11224 ASC_DBG(1, "probing I/O port 0x%x\n", iop_base);
11225 if (!AscFindSignature(iop_base))
11226 goto release_region;
11228 * I don't think this condition can actually happen, but the old
11229 * driver did it, and the chances of finding a VLB setup in 2007
11230 * to do testing with is slight to none.
11232 if (AscGetChipVersion(iop_base, ASC_IS_VL) > ASC_CHIP_MAX_VER_VL)
11233 goto release_region;
11236 shost = scsi_host_alloc(&advansys_template, sizeof(*board));
11238 goto release_region;
11240 board = shost_priv(shost);
11241 board->irq = advansys_vlb_irq_no(iop_base);
11243 board->shost = shost;
11245 err = advansys_board_found(shost, iop_base, ASC_IS_VL);
11249 dev_set_drvdata(dev, shost);
11253 scsi_host_put(shost);
11255 release_region(iop_base, ASC_IOADR_GAP);
11259 static struct isa_driver advansys_vlb_driver = {
11260 .probe = advansys_vlb_probe,
11261 .remove = advansys_vlb_remove,
11263 .owner = THIS_MODULE,
11264 .name = "advansys_vlb",
11268 static struct eisa_device_id advansys_eisa_table[] = {
11274 MODULE_DEVICE_TABLE(eisa, advansys_eisa_table);
11277 * EISA is a little more tricky than PCI; each EISA device may have two
11278 * channels, and this driver is written to make each channel its own Scsi_Host
11280 struct eisa_scsi_data {
11281 struct Scsi_Host *host[2];
11285 * The EISA IRQ number is found in bits 8 to 10 of the CfgLsw. It decodes as:
11295 static unsigned int advansys_eisa_irq_no(struct eisa_device *edev)
11297 unsigned short cfg_lsw = inw(edev->base_addr + 0xc86);
11298 unsigned int chip_irq = ((cfg_lsw >> 8) & 0x07) + 10;
11299 if ((chip_irq == 13) || (chip_irq > 15))
11304 static int advansys_eisa_probe(struct device *dev)
11306 int i, ioport, irq = 0;
11308 struct eisa_device *edev = to_eisa_device(dev);
11309 struct eisa_scsi_data *data;
11312 data = kzalloc(sizeof(*data), GFP_KERNEL);
11315 ioport = edev->base_addr + 0xc30;
11318 for (i = 0; i < 2; i++, ioport += 0x20) {
11319 struct asc_board *board;
11320 struct Scsi_Host *shost;
11321 if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) {
11322 printk(KERN_WARNING "Region %x-%x busy\n", ioport,
11323 ioport + ASC_IOADR_GAP - 1);
11326 if (!AscFindSignature(ioport)) {
11327 release_region(ioport, ASC_IOADR_GAP);
11332 * I don't know why we need to do this for EISA chips, but
11333 * not for any others. It looks to be equivalent to
11334 * AscGetChipCfgMsw, but I may have overlooked something,
11335 * so I'm not converting it until I get an EISA board to
11341 irq = advansys_eisa_irq_no(edev);
11344 shost = scsi_host_alloc(&advansys_template, sizeof(*board));
11346 goto release_region;
11348 board = shost_priv(shost);
11351 board->shost = shost;
11353 err = advansys_board_found(shost, ioport, ASC_IS_EISA);
11355 data->host[i] = shost;
11359 scsi_host_put(shost);
11361 release_region(ioport, ASC_IOADR_GAP);
11367 dev_set_drvdata(dev, data);
11371 kfree(data->host[0]);
11372 kfree(data->host[1]);
11378 static int advansys_eisa_remove(struct device *dev)
11381 struct eisa_scsi_data *data = dev_get_drvdata(dev);
11383 for (i = 0; i < 2; i++) {
11385 struct Scsi_Host *shost = data->host[i];
11388 ioport = shost->io_port;
11389 advansys_release(shost);
11390 release_region(ioport, ASC_IOADR_GAP);
11397 static struct eisa_driver advansys_eisa_driver = {
11398 .id_table = advansys_eisa_table,
11401 .probe = advansys_eisa_probe,
11402 .remove = advansys_eisa_remove,
11406 /* PCI Devices supported by this driver */
11407 static struct pci_device_id advansys_pci_tbl[] = {
11408 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A,
11409 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11410 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940,
11411 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11412 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U,
11413 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11414 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW,
11415 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11416 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1,
11417 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11418 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1,
11419 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
11423 MODULE_DEVICE_TABLE(pci, advansys_pci_tbl);
11425 static void advansys_set_latency(struct pci_dev *pdev)
11427 if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) ||
11428 (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) {
11429 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0);
11432 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
11433 if (latency < 0x20)
11434 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20);
11438 static int advansys_pci_probe(struct pci_dev *pdev,
11439 const struct pci_device_id *ent)
11442 struct Scsi_Host *shost;
11443 struct asc_board *board;
11445 err = pci_enable_device(pdev);
11448 err = pci_request_regions(pdev, DRV_NAME);
11450 goto disable_device;
11451 pci_set_master(pdev);
11452 advansys_set_latency(pdev);
11455 if (pci_resource_len(pdev, 0) == 0)
11456 goto release_region;
11458 ioport = pci_resource_start(pdev, 0);
11461 shost = scsi_host_alloc(&advansys_template, sizeof(*board));
11463 goto release_region;
11465 board = shost_priv(shost);
11466 board->irq = pdev->irq;
11467 board->dev = &pdev->dev;
11468 board->shost = shost;
11470 if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW ||
11471 pdev->device == PCI_DEVICE_ID_38C0800_REV1 ||
11472 pdev->device == PCI_DEVICE_ID_38C1600_REV1) {
11473 board->flags |= ASC_IS_WIDE_BOARD;
11476 err = advansys_board_found(shost, ioport, ASC_IS_PCI);
11480 pci_set_drvdata(pdev, shost);
11484 scsi_host_put(shost);
11486 pci_release_regions(pdev);
11488 pci_disable_device(pdev);
11493 static void advansys_pci_remove(struct pci_dev *pdev)
11495 advansys_release(pci_get_drvdata(pdev));
11496 pci_release_regions(pdev);
11497 pci_disable_device(pdev);
11500 static struct pci_driver advansys_pci_driver = {
11502 .id_table = advansys_pci_tbl,
11503 .probe = advansys_pci_probe,
11504 .remove = advansys_pci_remove,
11507 static int __init advansys_init(void)
11511 error = isa_register_driver(&advansys_vlb_driver,
11512 ASC_IOADR_TABLE_MAX_IX);
11516 error = eisa_driver_register(&advansys_eisa_driver);
11518 goto unregister_vlb;
11520 error = pci_register_driver(&advansys_pci_driver);
11522 goto unregister_eisa;
11527 eisa_driver_unregister(&advansys_eisa_driver);
11529 isa_unregister_driver(&advansys_vlb_driver);
11534 static void __exit advansys_exit(void)
11536 pci_unregister_driver(&advansys_pci_driver);
11537 eisa_driver_unregister(&advansys_eisa_driver);
11538 isa_unregister_driver(&advansys_vlb_driver);
11541 module_init(advansys_init);
11542 module_exit(advansys_exit);
11544 MODULE_LICENSE("GPL");
11545 MODULE_FIRMWARE("advansys/mcode.bin");
11546 MODULE_FIRMWARE("advansys/3550.bin");
11547 MODULE_FIRMWARE("advansys/38C0800.bin");
11548 MODULE_FIRMWARE("advansys/38C1600.bin");