2 * Adaptec AAC series RAID controller driver
3 * (c) Copyright 2001 Red Hat Inc.
5 * based on the old aacraid driver that is..
6 * Adaptec aacraid device driver for Linux.
8 * Copyright (c) 2000-2010 Adaptec, Inc.
9 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
10 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
29 * Abstract: Contains Interfaces to manage IOs.
33 #include <linux/kernel.h>
34 #include <linux/init.h>
35 #include <linux/types.h>
36 #include <linux/pci.h>
37 #include <linux/spinlock.h>
38 #include <linux/slab.h>
39 #include <linux/completion.h>
40 #include <linux/blkdev.h>
41 #include <linux/uaccess.h>
42 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
43 #include <linux/module.h>
45 #include <scsi/scsi.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <scsi/scsi_device.h>
48 #include <scsi/scsi_host.h>
52 /* values for inqd_pdt: Peripheral device type in plain English */
53 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
54 #define INQD_PDT_PROC 0x03 /* Processor device */
55 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
56 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
57 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
58 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
60 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
61 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
67 #define SENCODE_NO_SENSE 0x00
68 #define SENCODE_END_OF_DATA 0x00
69 #define SENCODE_BECOMING_READY 0x04
70 #define SENCODE_INIT_CMD_REQUIRED 0x04
71 #define SENCODE_UNRECOVERED_READ_ERROR 0x11
72 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
73 #define SENCODE_INVALID_COMMAND 0x20
74 #define SENCODE_LBA_OUT_OF_RANGE 0x21
75 #define SENCODE_INVALID_CDB_FIELD 0x24
76 #define SENCODE_LUN_NOT_SUPPORTED 0x25
77 #define SENCODE_INVALID_PARAM_FIELD 0x26
78 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
79 #define SENCODE_PARAM_VALUE_INVALID 0x26
80 #define SENCODE_RESET_OCCURRED 0x29
81 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
82 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
83 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
84 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
85 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
86 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
87 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
88 #define SENCODE_OVERLAPPED_COMMAND 0x4E
91 * Additional sense codes
94 #define ASENCODE_NO_SENSE 0x00
95 #define ASENCODE_END_OF_DATA 0x05
96 #define ASENCODE_BECOMING_READY 0x01
97 #define ASENCODE_INIT_CMD_REQUIRED 0x02
98 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
99 #define ASENCODE_INVALID_COMMAND 0x00
100 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
101 #define ASENCODE_INVALID_CDB_FIELD 0x00
102 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
103 #define ASENCODE_INVALID_PARAM_FIELD 0x00
104 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
105 #define ASENCODE_PARAM_VALUE_INVALID 0x02
106 #define ASENCODE_RESET_OCCURRED 0x00
107 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
108 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
109 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
110 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
111 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
112 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
113 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
114 #define ASENCODE_OVERLAPPED_COMMAND 0x00
116 #define AAC_STAT_GOOD (DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD)
118 #define BYTE0(x) (unsigned char)(x)
119 #define BYTE1(x) (unsigned char)((x) >> 8)
120 #define BYTE2(x) (unsigned char)((x) >> 16)
121 #define BYTE3(x) (unsigned char)((x) >> 24)
123 /* MODE_SENSE data format */
130 } __attribute__((packed)) hd;
136 } __attribute__((packed)) bd;
138 } __attribute__((packed)) aac_modep_data;
140 /* MODE_SENSE_10 data format */
148 } __attribute__((packed)) hd;
154 } __attribute__((packed)) bd;
156 } __attribute__((packed)) aac_modep10_data;
158 /*------------------------------------------------------------------------------
159 * S T R U C T S / T Y P E D E F S
160 *----------------------------------------------------------------------------*/
161 /* SCSI inquiry data */
162 struct inquiry_data {
163 u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */
164 u8 inqd_dtq; /* RMB | Device Type Qualifier */
165 u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */
166 u8 inqd_rdf; /* AENC | TrmIOP | Response data format */
167 u8 inqd_len; /* Additional length (n-4) */
168 u8 inqd_pad1[2];/* Reserved - must be zero */
169 u8 inqd_pad2; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
170 u8 inqd_vid[8]; /* Vendor ID */
171 u8 inqd_pid[16];/* Product ID */
172 u8 inqd_prl[4]; /* Product Revision Level */
175 /* Added for VPD 0x83 */
176 struct tvpd_id_descriptor_type_1 {
177 u8 codeset:4; /* VPD_CODE_SET */
179 u8 identifiertype:4; /* VPD_IDENTIFIER_TYPE */
185 u8 serialnumber[8]; /* SN in ASCII */
189 struct tvpd_id_descriptor_type_2 {
190 u8 codeset:4; /* VPD_CODE_SET */
192 u8 identifiertype:4; /* VPD_IDENTIFIER_TYPE */
198 /* The serial number supposed to be 40 bits,
199 * bit we only support 32, so make the last byte zero. */
206 struct tvpd_id_descriptor_type_3 {
207 u8 codeset : 4; /* VPD_CODE_SET */
209 u8 identifiertype : 4; /* VPD_IDENTIFIER_TYPE */
218 u8 DeviceTypeQualifier:3;
222 struct tvpd_id_descriptor_type_1 type1;
223 struct tvpd_id_descriptor_type_2 type2;
224 struct tvpd_id_descriptor_type_3 type3;
228 * M O D U L E G L O B A L S
231 static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *sgmap);
232 static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg);
233 static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg);
234 static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
235 struct aac_raw_io2 *rio2, int sg_max);
236 static long aac_build_sghba(struct scsi_cmnd *scsicmd,
237 struct aac_hba_cmd_req *hbacmd,
238 int sg_max, u64 sg_address);
239 static int aac_convert_sgraw2(struct aac_raw_io2 *rio2,
240 int pages, int nseg, int nseg_new);
241 static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
242 static int aac_send_hba_fib(struct scsi_cmnd *scsicmd);
243 #ifdef AAC_DETAILED_STATUS_INFO
244 static char *aac_get_status_string(u32 status);
248 * Non dasd selection is handled entirely in aachba now
251 static int nondasd = -1;
252 static int aac_cache = 2; /* WCE=0 to avoid performance problems */
253 static int dacmode = -1;
256 int startup_timeout = 180;
257 int aif_timeout = 120;
258 int aac_sync_mode; /* Only Sync. transfer - disabled */
259 int aac_convert_sgl = 1; /* convert non-conformable s/g list - enabled */
261 module_param(aac_sync_mode, int, S_IRUGO|S_IWUSR);
262 MODULE_PARM_DESC(aac_sync_mode, "Force sync. transfer mode"
264 module_param(aac_convert_sgl, int, S_IRUGO|S_IWUSR);
265 MODULE_PARM_DESC(aac_convert_sgl, "Convert non-conformable s/g list"
267 module_param(nondasd, int, S_IRUGO|S_IWUSR);
268 MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
270 module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
271 MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
272 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
273 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
274 "\tbit 2 - Disable only if Battery is protecting Cache");
275 module_param(dacmode, int, S_IRUGO|S_IWUSR);
276 MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
278 module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
279 MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
280 " adapter for foreign arrays.\n"
281 "This is typically needed in systems that do not have a BIOS."
283 module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
284 MODULE_PARM_DESC(msi, "IRQ handling."
285 " 0=PIC(default), 1=MSI, 2=MSI-X)");
286 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
287 MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
288 " adapter to have it's kernel up and\n"
289 "running. This is typically adjusted for large systems that do not"
291 module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
292 MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
293 " applications to pick up AIFs before\n"
294 "deregistering them. This is typically adjusted for heavily burdened"
298 module_param(aac_fib_dump, int, 0644);
299 MODULE_PARM_DESC(aac_fib_dump, "Dump controller fibs prior to IOP_RESET 0=off, 1=on");
302 module_param(numacb, int, S_IRUGO|S_IWUSR);
303 MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
304 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
305 " to use suggestion from Firmware.");
308 module_param(acbsize, int, S_IRUGO|S_IWUSR);
309 MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
310 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
311 " suggestion from Firmware.");
313 int update_interval = 30 * 60;
314 module_param(update_interval, int, S_IRUGO|S_IWUSR);
315 MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
316 " updates issued to adapter.");
318 int check_interval = 60;
319 module_param(check_interval, int, S_IRUGO|S_IWUSR);
320 MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
323 int aac_check_reset = 1;
324 module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
325 MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the"
326 " adapter. a value of -1 forces the reset to adapters programmed to"
329 int expose_physicals = -1;
330 module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
331 MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
332 " -1=protect 0=off, 1=on");
334 int aac_reset_devices;
335 module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
336 MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
339 module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR);
340 MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n"
342 "\t1 - Array Meta Data Signature (default)\n"
343 "\t2 - Adapter Serial Number");
346 static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
347 struct fib *fibptr) {
348 struct scsi_device *device;
350 if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
351 dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
352 aac_fib_complete(fibptr);
355 scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
356 device = scsicmd->device;
357 if (unlikely(!device)) {
358 dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
359 aac_fib_complete(fibptr);
366 * aac_get_config_status - check the adapter configuration
367 * @common: adapter to query
369 * Query config status, and commit the configuration if needed.
371 int aac_get_config_status(struct aac_dev *dev, int commit_flag)
376 if (!(fibptr = aac_fib_alloc(dev)))
379 aac_fib_init(fibptr);
381 struct aac_get_config_status *dinfo;
382 dinfo = (struct aac_get_config_status *) fib_data(fibptr);
384 dinfo->command = cpu_to_le32(VM_ContainerConfig);
385 dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
386 dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
389 status = aac_fib_send(ContainerCommand,
391 sizeof (struct aac_get_config_status),
396 printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
398 struct aac_get_config_status_resp *reply
399 = (struct aac_get_config_status_resp *) fib_data(fibptr);
400 dprintk((KERN_WARNING
401 "aac_get_config_status: response=%d status=%d action=%d\n",
402 le32_to_cpu(reply->response),
403 le32_to_cpu(reply->status),
404 le32_to_cpu(reply->data.action)));
405 if ((le32_to_cpu(reply->response) != ST_OK) ||
406 (le32_to_cpu(reply->status) != CT_OK) ||
407 (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
408 printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
412 /* Do not set XferState to zero unless receives a response from F/W */
414 aac_fib_complete(fibptr);
416 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
418 if ((aac_commit == 1) || commit_flag) {
419 struct aac_commit_config * dinfo;
420 aac_fib_init(fibptr);
421 dinfo = (struct aac_commit_config *) fib_data(fibptr);
423 dinfo->command = cpu_to_le32(VM_ContainerConfig);
424 dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
426 status = aac_fib_send(ContainerCommand,
428 sizeof (struct aac_commit_config),
432 /* Do not set XferState to zero unless
433 * receives a response from F/W */
435 aac_fib_complete(fibptr);
436 } else if (aac_commit == 0) {
438 "aac_get_config_status: Foreign device configurations are being ignored\n");
441 /* FIB should be freed only after getting the response from the F/W */
442 if (status != -ERESTARTSYS)
443 aac_fib_free(fibptr);
447 static void aac_expose_phy_device(struct scsi_cmnd *scsicmd)
450 scsi_sg_copy_to_buffer(scsicmd, &inq_data, sizeof(inq_data));
451 if ((inq_data & 0x20) && (inq_data & 0x1f) == TYPE_DISK) {
453 scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
458 * aac_get_containers - list containers
459 * @common: adapter to probe
461 * Make a list of all containers on this controller
463 int aac_get_containers(struct aac_dev *dev)
465 struct fsa_dev_info *fsa_dev_ptr;
469 struct aac_get_container_count *dinfo;
470 struct aac_get_container_count_resp *dresp;
471 int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
473 if (!(fibptr = aac_fib_alloc(dev)))
476 aac_fib_init(fibptr);
477 dinfo = (struct aac_get_container_count *) fib_data(fibptr);
478 dinfo->command = cpu_to_le32(VM_ContainerConfig);
479 dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
481 status = aac_fib_send(ContainerCommand,
483 sizeof (struct aac_get_container_count),
488 dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
489 maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
490 if (fibptr->dev->supplement_adapter_info.supported_options2 &
491 AAC_OPTION_SUPPORTED_240_VOLUMES) {
492 maximum_num_containers =
493 le32_to_cpu(dresp->MaxSimpleVolumes);
495 aac_fib_complete(fibptr);
497 /* FIB should be freed only after getting the response from the F/W */
498 if (status != -ERESTARTSYS)
499 aac_fib_free(fibptr);
501 if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
502 maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
503 if (dev->fsa_dev == NULL ||
504 dev->maximum_num_containers != maximum_num_containers) {
506 fsa_dev_ptr = dev->fsa_dev;
508 dev->fsa_dev = kcalloc(maximum_num_containers,
509 sizeof(*fsa_dev_ptr), GFP_KERNEL);
518 dev->maximum_num_containers = maximum_num_containers;
520 for (index = 0; index < dev->maximum_num_containers; index++) {
521 dev->fsa_dev[index].devname[0] = '\0';
522 dev->fsa_dev[index].valid = 0;
524 status = aac_probe_container(dev, index);
527 printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
534 static void get_container_name_callback(void *context, struct fib * fibptr)
536 struct aac_get_name_resp * get_name_reply;
537 struct scsi_cmnd * scsicmd;
539 scsicmd = (struct scsi_cmnd *) context;
541 if (!aac_valid_context(scsicmd, fibptr))
544 dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
545 BUG_ON(fibptr == NULL);
547 get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
548 /* Failure is irrelevant, using default value instead */
549 if ((le32_to_cpu(get_name_reply->status) == CT_OK)
550 && (get_name_reply->data[0] != '\0')) {
551 char *sp = get_name_reply->data;
552 sp[sizeof(((struct aac_get_name_resp *)NULL)->data)] = '\0';
556 struct inquiry_data inq;
557 char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
558 int count = sizeof(d);
561 *dp++ = (*sp) ? *sp++ : ' ';
562 } while (--count > 0);
564 scsi_sg_copy_to_buffer(scsicmd, &inq, sizeof(inq));
565 memcpy(inq.inqd_pid, d, sizeof(d));
566 scsi_sg_copy_from_buffer(scsicmd, &inq, sizeof(inq));
570 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
572 aac_fib_complete(fibptr);
573 scsicmd->scsi_done(scsicmd);
577 * aac_get_container_name - get container name, none blocking.
579 static int aac_get_container_name(struct scsi_cmnd * scsicmd)
582 struct aac_get_name *dinfo;
583 struct fib * cmd_fibcontext;
584 struct aac_dev * dev;
586 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
588 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
590 aac_fib_init(cmd_fibcontext);
591 dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
593 dinfo->command = cpu_to_le32(VM_ContainerConfig);
594 dinfo->type = cpu_to_le32(CT_READ_NAME);
595 dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
596 dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
598 status = aac_fib_send(ContainerCommand,
600 sizeof(struct aac_get_name_resp),
603 (fib_callback)get_container_name_callback,
607 * Check that the command queued to the controller
609 if (status == -EINPROGRESS) {
610 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
614 printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
615 aac_fib_complete(cmd_fibcontext);
619 static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
621 struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
623 if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1))
624 return aac_scsi_cmd(scsicmd);
626 scsicmd->result = DID_NO_CONNECT << 16;
627 scsicmd->scsi_done(scsicmd);
631 static void _aac_probe_container2(void * context, struct fib * fibptr)
633 struct fsa_dev_info *fsa_dev_ptr;
634 int (*callback)(struct scsi_cmnd *);
635 struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
639 if (!aac_valid_context(scsicmd, fibptr))
642 scsicmd->SCp.Status = 0;
643 fsa_dev_ptr = fibptr->dev->fsa_dev;
645 struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
648 fsa_dev_ptr += scmd_id(scsicmd);
650 fibptr->dev->supplement_adapter_info.supported_options2;
652 if ((le32_to_cpu(dresp->status) == ST_OK) &&
653 (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
654 (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
655 if (!(sup_options2 & AAC_OPTION_VARIABLE_BLOCK_SIZE)) {
656 dresp->mnt[0].fileinfo.bdevinfo.block_size = 0x200;
657 fsa_dev_ptr->block_size = 0x200;
659 fsa_dev_ptr->block_size =
660 le32_to_cpu(dresp->mnt[0].fileinfo.bdevinfo.block_size);
662 for (i = 0; i < 16; i++)
663 fsa_dev_ptr->identifier[i] =
664 dresp->mnt[0].fileinfo.bdevinfo
666 fsa_dev_ptr->valid = 1;
667 /* sense_key holds the current state of the spin-up */
668 if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
669 fsa_dev_ptr->sense_data.sense_key = NOT_READY;
670 else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
671 fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
672 fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
674 = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
675 (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
676 fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
678 if ((fsa_dev_ptr->valid & 1) == 0)
679 fsa_dev_ptr->valid = 0;
680 scsicmd->SCp.Status = le32_to_cpu(dresp->count);
682 aac_fib_complete(fibptr);
683 aac_fib_free(fibptr);
684 callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
685 scsicmd->SCp.ptr = NULL;
686 (*callback)(scsicmd);
690 static void _aac_probe_container1(void * context, struct fib * fibptr)
692 struct scsi_cmnd * scsicmd;
693 struct aac_mount * dresp;
694 struct aac_query_mount *dinfo;
697 dresp = (struct aac_mount *) fib_data(fibptr);
698 if (!(fibptr->dev->supplement_adapter_info.supported_options2 &
699 AAC_OPTION_VARIABLE_BLOCK_SIZE))
700 dresp->mnt[0].capacityhigh = 0;
701 if ((le32_to_cpu(dresp->status) != ST_OK) ||
702 (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) {
703 _aac_probe_container2(context, fibptr);
706 scsicmd = (struct scsi_cmnd *) context;
708 if (!aac_valid_context(scsicmd, fibptr))
711 aac_fib_init(fibptr);
713 dinfo = (struct aac_query_mount *)fib_data(fibptr);
715 if (fibptr->dev->supplement_adapter_info.supported_options2 &
716 AAC_OPTION_VARIABLE_BLOCK_SIZE)
717 dinfo->command = cpu_to_le32(VM_NameServeAllBlk);
719 dinfo->command = cpu_to_le32(VM_NameServe64);
721 dinfo->count = cpu_to_le32(scmd_id(scsicmd));
722 dinfo->type = cpu_to_le32(FT_FILESYS);
724 status = aac_fib_send(ContainerCommand,
726 sizeof(struct aac_query_mount),
729 _aac_probe_container2,
732 * Check that the command queued to the controller
734 if (status == -EINPROGRESS)
735 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
736 else if (status < 0) {
737 /* Inherit results from VM_NameServe, if any */
738 dresp->status = cpu_to_le32(ST_OK);
739 _aac_probe_container2(context, fibptr);
743 static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
746 int status = -ENOMEM;
748 if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
749 struct aac_query_mount *dinfo;
751 aac_fib_init(fibptr);
753 dinfo = (struct aac_query_mount *)fib_data(fibptr);
755 if (fibptr->dev->supplement_adapter_info.supported_options2 &
756 AAC_OPTION_VARIABLE_BLOCK_SIZE)
757 dinfo->command = cpu_to_le32(VM_NameServeAllBlk);
759 dinfo->command = cpu_to_le32(VM_NameServe);
761 dinfo->count = cpu_to_le32(scmd_id(scsicmd));
762 dinfo->type = cpu_to_le32(FT_FILESYS);
763 scsicmd->SCp.ptr = (char *)callback;
765 status = aac_fib_send(ContainerCommand,
767 sizeof(struct aac_query_mount),
770 _aac_probe_container1,
773 * Check that the command queued to the controller
775 if (status == -EINPROGRESS) {
776 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
780 scsicmd->SCp.ptr = NULL;
781 aac_fib_complete(fibptr);
782 aac_fib_free(fibptr);
786 struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
788 fsa_dev_ptr += scmd_id(scsicmd);
789 if ((fsa_dev_ptr->valid & 1) == 0) {
790 fsa_dev_ptr->valid = 0;
791 return (*callback)(scsicmd);
799 * aac_probe_container - query a logical volume
800 * @dev: device to query
801 * @cid: container identifier
803 * Queries the controller about the given volume. The volume information
804 * is updated in the struct fsa_dev_info structure rather than returned.
806 static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
808 scsicmd->device = NULL;
812 int aac_probe_container(struct aac_dev *dev, int cid)
814 struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
815 struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
818 if (!scsicmd || !scsidev) {
823 scsicmd->list.next = NULL;
824 scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
826 scsicmd->device = scsidev;
827 scsidev->sdev_state = 0;
829 scsidev->host = dev->scsi_host_ptr;
831 if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
832 while (scsicmd->device == scsidev)
835 status = scsicmd->SCp.Status;
840 /* Local Structure to set SCSI inquiry data strings */
842 char vid[8]; /* Vendor ID */
843 char pid[16]; /* Product ID */
844 char prl[4]; /* Product Revision Level */
848 * InqStrCopy - string merge
849 * @a: string to copy from
850 * @b: string to copy to
852 * Copy a String from one location to another
856 static void inqstrcpy(char *a, char *b)
859 while (*a != (char)0)
863 static char *container_types[] = {
887 char * get_container_type(unsigned tindex)
889 if (tindex >= ARRAY_SIZE(container_types))
890 tindex = ARRAY_SIZE(container_types) - 1;
891 return container_types[tindex];
894 /* Function: setinqstr
896 * Arguments: [1] pointer to void [1] int
898 * Purpose: Sets SCSI inquiry data strings for vendor, product
899 * and revision level. Allows strings to be set in platform dependent
900 * files instead of in OS dependent driver source.
903 static void setinqstr(struct aac_dev *dev, void *data, int tindex)
905 struct scsi_inq *str;
906 struct aac_supplement_adapter_info *sup_adap_info;
908 sup_adap_info = &dev->supplement_adapter_info;
909 str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
910 memset(str, ' ', sizeof(*str));
912 if (sup_adap_info->adapter_type_text[0]) {
913 char *cp = sup_adap_info->adapter_type_text;
915 if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
916 inqstrcpy("SMC", str->vid);
918 c = sizeof(str->vid);
919 while (*cp && *cp != ' ' && --c)
923 inqstrcpy(sup_adap_info->adapter_type_text, str->vid);
925 while (*cp && *cp != ' ')
930 /* last six chars reserved for vol type */
932 if (strlen(cp) > sizeof(str->pid)) {
933 c = cp[sizeof(str->pid)];
934 cp[sizeof(str->pid)] = '\0';
936 inqstrcpy (cp, str->pid);
938 cp[sizeof(str->pid)] = c;
940 struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
942 inqstrcpy (mp->vname, str->vid);
943 /* last six chars reserved for vol type */
944 inqstrcpy (mp->model, str->pid);
947 if (tindex < ARRAY_SIZE(container_types)){
948 char *findit = str->pid;
950 for ( ; *findit != ' '; findit++); /* walk till we find a space */
951 /* RAID is superfluous in the context of a RAID device */
952 if (memcmp(findit-4, "RAID", 4) == 0)
953 *(findit -= 4) = ' ';
954 if (((findit - str->pid) + strlen(container_types[tindex]))
955 < (sizeof(str->pid) + sizeof(str->prl)))
956 inqstrcpy (container_types[tindex], findit + 1);
958 inqstrcpy ("V1.0", str->prl);
961 static void build_vpd83_type3(struct tvpd_page83 *vpdpage83data,
962 struct aac_dev *dev, struct scsi_cmnd *scsicmd)
966 vpdpage83data->type3.codeset = 1;
967 vpdpage83data->type3.identifiertype = 3;
968 vpdpage83data->type3.identifierlength = sizeof(vpdpage83data->type3)
971 for (container = 0; container < dev->maximum_num_containers;
974 if (scmd_id(scsicmd) == container) {
975 memcpy(vpdpage83data->type3.Identifier,
976 dev->fsa_dev[container].identifier,
983 static void get_container_serial_callback(void *context, struct fib * fibptr)
985 struct aac_get_serial_resp * get_serial_reply;
986 struct scsi_cmnd * scsicmd;
988 BUG_ON(fibptr == NULL);
990 scsicmd = (struct scsi_cmnd *) context;
991 if (!aac_valid_context(scsicmd, fibptr))
994 get_serial_reply = (struct aac_get_serial_resp *) fib_data(fibptr);
995 /* Failure is irrelevant, using default value instead */
996 if (le32_to_cpu(get_serial_reply->status) == CT_OK) {
997 /*Check to see if it's for VPD 0x83 or 0x80 */
998 if (scsicmd->cmnd[2] == 0x83) {
999 /* vpd page 0x83 - Device Identification Page */
1000 struct aac_dev *dev;
1002 struct tvpd_page83 vpdpage83data;
1004 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1006 memset(((u8 *)&vpdpage83data), 0,
1007 sizeof(vpdpage83data));
1009 /* DIRECT_ACCESS_DEVIC */
1010 vpdpage83data.DeviceType = 0;
1011 /* DEVICE_CONNECTED */
1012 vpdpage83data.DeviceTypeQualifier = 0;
1013 /* VPD_DEVICE_IDENTIFIERS */
1014 vpdpage83data.PageCode = 0x83;
1015 vpdpage83data.reserved = 0;
1016 vpdpage83data.PageLength =
1017 sizeof(vpdpage83data.type1) +
1018 sizeof(vpdpage83data.type2);
1020 /* VPD 83 Type 3 is not supported for ARC */
1021 if (dev->sa_firmware)
1022 vpdpage83data.PageLength +=
1023 sizeof(vpdpage83data.type3);
1025 /* T10 Vendor Identifier Field Format */
1026 /* VpdcodesetAscii */
1027 vpdpage83data.type1.codeset = 2;
1028 /* VpdIdentifierTypeVendorId */
1029 vpdpage83data.type1.identifiertype = 1;
1030 vpdpage83data.type1.identifierlength =
1031 sizeof(vpdpage83data.type1) - 4;
1033 /* "ADAPTEC " for adaptec */
1034 memcpy(vpdpage83data.type1.venid,
1036 sizeof(vpdpage83data.type1.venid));
1037 memcpy(vpdpage83data.type1.productid,
1040 vpdpage83data.type1.productid));
1042 /* Convert to ascii based serial number.
1043 * The LSB is the the end.
1045 for (i = 0; i < 8; i++) {
1047 (u8)((get_serial_reply->uid >> ((7 - i) * 4)) & 0xF);
1049 vpdpage83data.type1.serialnumber[i] =
1052 vpdpage83data.type1.serialnumber[i] =
1057 /* VpdCodeSetBinary */
1058 vpdpage83data.type2.codeset = 1;
1059 /* VpdidentifiertypeEUI64 */
1060 vpdpage83data.type2.identifiertype = 2;
1061 vpdpage83data.type2.identifierlength =
1062 sizeof(vpdpage83data.type2) - 4;
1064 vpdpage83data.type2.eu64id.venid[0] = 0xD0;
1065 vpdpage83data.type2.eu64id.venid[1] = 0;
1066 vpdpage83data.type2.eu64id.venid[2] = 0;
1068 vpdpage83data.type2.eu64id.Serial =
1069 get_serial_reply->uid;
1070 vpdpage83data.type2.eu64id.reserved = 0;
1073 * VpdIdentifierTypeFCPHName
1074 * VPD 0x83 Type 3 not supported for ARC
1076 if (dev->sa_firmware) {
1077 build_vpd83_type3(&vpdpage83data,
1081 /* Move the inquiry data to the response buffer. */
1082 scsi_sg_copy_from_buffer(scsicmd, &vpdpage83data,
1083 sizeof(vpdpage83data));
1085 /* It must be for VPD 0x80 */
1088 sp[0] = INQD_PDT_DA;
1089 sp[1] = scsicmd->cmnd[2];
1091 sp[3] = snprintf(sp+4, sizeof(sp)-4, "%08X",
1092 le32_to_cpu(get_serial_reply->uid));
1093 scsi_sg_copy_from_buffer(scsicmd, sp,
1098 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1100 aac_fib_complete(fibptr);
1101 scsicmd->scsi_done(scsicmd);
1105 * aac_get_container_serial - get container serial, none blocking.
1107 static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
1110 struct aac_get_serial *dinfo;
1111 struct fib * cmd_fibcontext;
1112 struct aac_dev * dev;
1114 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1116 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
1118 aac_fib_init(cmd_fibcontext);
1119 dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
1121 dinfo->command = cpu_to_le32(VM_ContainerConfig);
1122 dinfo->type = cpu_to_le32(CT_CID_TO_32BITS_UID);
1123 dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
1125 status = aac_fib_send(ContainerCommand,
1127 sizeof(struct aac_get_serial_resp),
1130 (fib_callback) get_container_serial_callback,
1134 * Check that the command queued to the controller
1136 if (status == -EINPROGRESS) {
1137 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1141 printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
1142 aac_fib_complete(cmd_fibcontext);
1146 /* Function: setinqserial
1148 * Arguments: [1] pointer to void [1] int
1150 * Purpose: Sets SCSI Unit Serial number.
1151 * This is a fake. We should read a proper
1152 * serial number from the container. <SuSE>But
1153 * without docs it's quite hard to do it :-)
1154 * So this will have to do in the meantime.</SuSE>
1157 static int setinqserial(struct aac_dev *dev, void *data, int cid)
1160 * This breaks array migration.
1162 return snprintf((char *)(data), sizeof(struct scsi_inq) - 4, "%08X%02X",
1163 le32_to_cpu(dev->adapter_info.serial[0]), cid);
1166 static inline void set_sense(struct sense_data *sense_data, u8 sense_key,
1167 u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer)
1169 u8 *sense_buf = (u8 *)sense_data;
1170 /* Sense data valid, err code 70h */
1171 sense_buf[0] = 0x70; /* No info field */
1172 sense_buf[1] = 0; /* Segment number, always zero */
1174 sense_buf[2] = sense_key; /* Sense key */
1176 sense_buf[12] = sense_code; /* Additional sense code */
1177 sense_buf[13] = a_sense_code; /* Additional sense code qualifier */
1179 if (sense_key == ILLEGAL_REQUEST) {
1180 sense_buf[7] = 10; /* Additional sense length */
1182 sense_buf[15] = bit_pointer;
1183 /* Illegal parameter is in the parameter block */
1184 if (sense_code == SENCODE_INVALID_CDB_FIELD)
1185 sense_buf[15] |= 0xc0;/* Std sense key specific field */
1186 /* Illegal parameter is in the CDB block */
1187 sense_buf[16] = field_pointer >> 8; /* MSB */
1188 sense_buf[17] = field_pointer; /* LSB */
1190 sense_buf[7] = 6; /* Additional sense length */
1193 static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
1195 if (lba & 0xffffffff00000000LL) {
1196 int cid = scmd_id(cmd);
1197 dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
1198 cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1199 SAM_STAT_CHECK_CONDITION;
1200 set_sense(&dev->fsa_dev[cid].sense_data,
1201 HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1202 ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1203 memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1204 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1205 SCSI_SENSE_BUFFERSIZE));
1206 cmd->scsi_done(cmd);
1212 static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
1217 static void io_callback(void *context, struct fib * fibptr);
1219 static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1221 struct aac_dev *dev = fib->dev;
1222 u16 fibsize, command;
1226 if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
1227 dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) &&
1229 struct aac_raw_io2 *readcmd2;
1230 readcmd2 = (struct aac_raw_io2 *) fib_data(fib);
1231 memset(readcmd2, 0, sizeof(struct aac_raw_io2));
1232 readcmd2->blockLow = cpu_to_le32((u32)(lba&0xffffffff));
1233 readcmd2->blockHigh = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1234 readcmd2->byteCount = cpu_to_le32(count *
1235 dev->fsa_dev[scmd_id(cmd)].block_size);
1236 readcmd2->cid = cpu_to_le16(scmd_id(cmd));
1237 readcmd2->flags = cpu_to_le16(RIO2_IO_TYPE_READ);
1238 ret = aac_build_sgraw2(cmd, readcmd2,
1239 dev->scsi_host_ptr->sg_tablesize);
1242 command = ContainerRawIo2;
1243 fibsize = sizeof(struct aac_raw_io2) +
1244 ((le32_to_cpu(readcmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
1246 struct aac_raw_io *readcmd;
1247 readcmd = (struct aac_raw_io *) fib_data(fib);
1248 readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
1249 readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1250 readcmd->count = cpu_to_le32(count *
1251 dev->fsa_dev[scmd_id(cmd)].block_size);
1252 readcmd->cid = cpu_to_le16(scmd_id(cmd));
1253 readcmd->flags = cpu_to_le16(RIO_TYPE_READ);
1254 readcmd->bpTotal = 0;
1255 readcmd->bpComplete = 0;
1256 ret = aac_build_sgraw(cmd, &readcmd->sg);
1259 command = ContainerRawIo;
1260 fibsize = sizeof(struct aac_raw_io) +
1261 ((le32_to_cpu(readcmd->sg.count)-1) * sizeof(struct sgentryraw));
1264 BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
1266 * Now send the Fib to the adapter
1268 return aac_fib_send(command,
1273 (fib_callback) io_callback,
1277 static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1280 struct aac_read64 *readcmd;
1284 readcmd = (struct aac_read64 *) fib_data(fib);
1285 readcmd->command = cpu_to_le32(VM_CtHostRead64);
1286 readcmd->cid = cpu_to_le16(scmd_id(cmd));
1287 readcmd->sector_count = cpu_to_le16(count);
1288 readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1292 ret = aac_build_sg64(cmd, &readcmd->sg);
1295 fibsize = sizeof(struct aac_read64) +
1296 ((le32_to_cpu(readcmd->sg.count) - 1) *
1297 sizeof (struct sgentry64));
1298 BUG_ON (fibsize > (fib->dev->max_fib_size -
1299 sizeof(struct aac_fibhdr)));
1301 * Now send the Fib to the adapter
1303 return aac_fib_send(ContainerCommand64,
1308 (fib_callback) io_callback,
1312 static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1315 struct aac_read *readcmd;
1316 struct aac_dev *dev = fib->dev;
1320 readcmd = (struct aac_read *) fib_data(fib);
1321 readcmd->command = cpu_to_le32(VM_CtBlockRead);
1322 readcmd->cid = cpu_to_le32(scmd_id(cmd));
1323 readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1324 readcmd->count = cpu_to_le32(count *
1325 dev->fsa_dev[scmd_id(cmd)].block_size);
1327 ret = aac_build_sg(cmd, &readcmd->sg);
1330 fibsize = sizeof(struct aac_read) +
1331 ((le32_to_cpu(readcmd->sg.count) - 1) *
1332 sizeof (struct sgentry));
1333 BUG_ON (fibsize > (fib->dev->max_fib_size -
1334 sizeof(struct aac_fibhdr)));
1336 * Now send the Fib to the adapter
1338 return aac_fib_send(ContainerCommand,
1343 (fib_callback) io_callback,
1347 static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1349 struct aac_dev *dev = fib->dev;
1350 u16 fibsize, command;
1354 if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
1355 dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) &&
1357 struct aac_raw_io2 *writecmd2;
1358 writecmd2 = (struct aac_raw_io2 *) fib_data(fib);
1359 memset(writecmd2, 0, sizeof(struct aac_raw_io2));
1360 writecmd2->blockLow = cpu_to_le32((u32)(lba&0xffffffff));
1361 writecmd2->blockHigh = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1362 writecmd2->byteCount = cpu_to_le32(count *
1363 dev->fsa_dev[scmd_id(cmd)].block_size);
1364 writecmd2->cid = cpu_to_le16(scmd_id(cmd));
1365 writecmd2->flags = (fua && ((aac_cache & 5) != 1) &&
1366 (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
1367 cpu_to_le16(RIO2_IO_TYPE_WRITE|RIO2_IO_SUREWRITE) :
1368 cpu_to_le16(RIO2_IO_TYPE_WRITE);
1369 ret = aac_build_sgraw2(cmd, writecmd2,
1370 dev->scsi_host_ptr->sg_tablesize);
1373 command = ContainerRawIo2;
1374 fibsize = sizeof(struct aac_raw_io2) +
1375 ((le32_to_cpu(writecmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
1377 struct aac_raw_io *writecmd;
1378 writecmd = (struct aac_raw_io *) fib_data(fib);
1379 writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
1380 writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1381 writecmd->count = cpu_to_le32(count *
1382 dev->fsa_dev[scmd_id(cmd)].block_size);
1383 writecmd->cid = cpu_to_le16(scmd_id(cmd));
1384 writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
1385 (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
1386 cpu_to_le16(RIO_TYPE_WRITE|RIO_SUREWRITE) :
1387 cpu_to_le16(RIO_TYPE_WRITE);
1388 writecmd->bpTotal = 0;
1389 writecmd->bpComplete = 0;
1390 ret = aac_build_sgraw(cmd, &writecmd->sg);
1393 command = ContainerRawIo;
1394 fibsize = sizeof(struct aac_raw_io) +
1395 ((le32_to_cpu(writecmd->sg.count)-1) * sizeof (struct sgentryraw));
1398 BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
1400 * Now send the Fib to the adapter
1402 return aac_fib_send(command,
1407 (fib_callback) io_callback,
1411 static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1414 struct aac_write64 *writecmd;
1418 writecmd = (struct aac_write64 *) fib_data(fib);
1419 writecmd->command = cpu_to_le32(VM_CtHostWrite64);
1420 writecmd->cid = cpu_to_le16(scmd_id(cmd));
1421 writecmd->sector_count = cpu_to_le16(count);
1422 writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1424 writecmd->flags = 0;
1426 ret = aac_build_sg64(cmd, &writecmd->sg);
1429 fibsize = sizeof(struct aac_write64) +
1430 ((le32_to_cpu(writecmd->sg.count) - 1) *
1431 sizeof (struct sgentry64));
1432 BUG_ON (fibsize > (fib->dev->max_fib_size -
1433 sizeof(struct aac_fibhdr)));
1435 * Now send the Fib to the adapter
1437 return aac_fib_send(ContainerCommand64,
1442 (fib_callback) io_callback,
1446 static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1449 struct aac_write *writecmd;
1450 struct aac_dev *dev = fib->dev;
1454 writecmd = (struct aac_write *) fib_data(fib);
1455 writecmd->command = cpu_to_le32(VM_CtBlockWrite);
1456 writecmd->cid = cpu_to_le32(scmd_id(cmd));
1457 writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1458 writecmd->count = cpu_to_le32(count *
1459 dev->fsa_dev[scmd_id(cmd)].block_size);
1460 writecmd->sg.count = cpu_to_le32(1);
1461 /* ->stable is not used - it did mean which type of write */
1463 ret = aac_build_sg(cmd, &writecmd->sg);
1466 fibsize = sizeof(struct aac_write) +
1467 ((le32_to_cpu(writecmd->sg.count) - 1) *
1468 sizeof (struct sgentry));
1469 BUG_ON (fibsize > (fib->dev->max_fib_size -
1470 sizeof(struct aac_fibhdr)));
1472 * Now send the Fib to the adapter
1474 return aac_fib_send(ContainerCommand,
1479 (fib_callback) io_callback,
1483 static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
1485 struct aac_srb * srbcmd;
1490 switch(cmd->sc_data_direction){
1494 case DMA_BIDIRECTIONAL:
1495 flag = SRB_DataIn | SRB_DataOut;
1497 case DMA_FROM_DEVICE:
1501 default: /* shuts up some versions of gcc */
1502 flag = SRB_NoDataXfer;
1506 srbcmd = (struct aac_srb*) fib_data(fib);
1507 srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1508 srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
1509 srbcmd->id = cpu_to_le32(scmd_id(cmd));
1510 srbcmd->lun = cpu_to_le32(cmd->device->lun);
1511 srbcmd->flags = cpu_to_le32(flag);
1512 timeout = cmd->request->timeout/HZ;
1515 srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
1516 srbcmd->retry_limit = 0; /* Obsolete parameter */
1517 srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
1521 static struct aac_hba_cmd_req *aac_construct_hbacmd(struct fib *fib,
1522 struct scsi_cmnd *cmd)
1524 struct aac_hba_cmd_req *hbacmd;
1525 struct aac_dev *dev;
1529 dev = (struct aac_dev *)cmd->device->host->hostdata;
1531 hbacmd = (struct aac_hba_cmd_req *)fib->hw_fib_va;
1532 memset(hbacmd, 0, 96); /* sizeof(*hbacmd) is not necessary */
1533 /* iu_type is a parameter of aac_hba_send */
1534 switch (cmd->sc_data_direction) {
1538 case DMA_FROM_DEVICE:
1539 case DMA_BIDIRECTIONAL:
1546 hbacmd->lun[1] = cpu_to_le32(cmd->device->lun);
1548 bus = aac_logical_to_phys(scmd_channel(cmd));
1549 target = scmd_id(cmd);
1550 hbacmd->it_nexus = dev->hba_map[bus][target].rmw_nexus;
1552 /* we fill in reply_qid later in aac_src_deliver_message */
1553 /* we fill in iu_type, request_id later in aac_hba_send */
1554 /* we fill in emb_data_desc_count later in aac_build_sghba */
1556 memcpy(hbacmd->cdb, cmd->cmnd, cmd->cmd_len);
1557 hbacmd->data_length = cpu_to_le32(scsi_bufflen(cmd));
1559 address = (u64)fib->hw_error_pa;
1560 hbacmd->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
1561 hbacmd->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
1562 hbacmd->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
1567 static void aac_srb_callback(void *context, struct fib * fibptr);
1569 static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
1572 struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1575 ret = aac_build_sg64(cmd, (struct sgmap64 *) &srbcmd->sg);
1578 srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1580 memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1581 memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1583 * Build Scatter/Gather list
1585 fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
1586 ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
1587 sizeof (struct sgentry64));
1588 BUG_ON (fibsize > (fib->dev->max_fib_size -
1589 sizeof(struct aac_fibhdr)));
1592 * Now send the Fib to the adapter
1594 return aac_fib_send(ScsiPortCommand64, fib,
1595 fibsize, FsaNormal, 0, 1,
1596 (fib_callback) aac_srb_callback,
1600 static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
1603 struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1606 ret = aac_build_sg(cmd, (struct sgmap *)&srbcmd->sg);
1609 srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1611 memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1612 memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1614 * Build Scatter/Gather list
1616 fibsize = sizeof (struct aac_srb) +
1617 (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
1618 sizeof (struct sgentry));
1619 BUG_ON (fibsize > (fib->dev->max_fib_size -
1620 sizeof(struct aac_fibhdr)));
1623 * Now send the Fib to the adapter
1625 return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
1626 (fib_callback) aac_srb_callback, (void *) cmd);
1629 static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
1631 if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac &&
1632 (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
1634 return aac_scsi_32(fib, cmd);
1637 static int aac_adapter_hba(struct fib *fib, struct scsi_cmnd *cmd)
1639 struct aac_hba_cmd_req *hbacmd = aac_construct_hbacmd(fib, cmd);
1640 struct aac_dev *dev;
1643 dev = (struct aac_dev *)cmd->device->host->hostdata;
1645 ret = aac_build_sghba(cmd, hbacmd,
1646 dev->scsi_host_ptr->sg_tablesize, (u64)fib->hw_sgl_pa);
1651 * Now send the HBA command to the adapter
1653 fib->hbacmd_size = 64 + le32_to_cpu(hbacmd->emb_data_desc_count) *
1654 sizeof(struct aac_hba_sgl);
1656 return aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ, fib,
1657 (fib_callback) aac_hba_callback,
1661 int aac_issue_bmic_identify(struct aac_dev *dev, u32 bus, u32 target)
1664 struct aac_srb *srbcmd;
1665 struct sgmap64 *sg64;
1666 struct aac_ciss_identify_pd *identify_resp;
1669 u16 fibsize, datasize;
1670 int rcode = -ENOMEM;
1673 fibptr = aac_fib_alloc(dev);
1677 fibsize = sizeof(struct aac_srb) -
1678 sizeof(struct sgentry) + sizeof(struct sgentry64);
1679 datasize = sizeof(struct aac_ciss_identify_pd);
1681 identify_resp = dma_alloc_coherent(&dev->pdev->dev, datasize, &addr,
1686 vbus = (u32)le16_to_cpu(dev->supplement_adapter_info.virt_device_bus);
1687 vid = (u32)le16_to_cpu(dev->supplement_adapter_info.virt_device_target);
1689 aac_fib_init(fibptr);
1691 srbcmd = (struct aac_srb *) fib_data(fibptr);
1692 srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1693 srbcmd->channel = cpu_to_le32(vbus);
1694 srbcmd->id = cpu_to_le32(vid);
1696 srbcmd->flags = cpu_to_le32(SRB_DataIn);
1697 srbcmd->timeout = cpu_to_le32(10);
1698 srbcmd->retry_limit = 0;
1699 srbcmd->cdb_size = cpu_to_le32(12);
1700 srbcmd->count = cpu_to_le32(datasize);
1702 memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1703 srbcmd->cdb[0] = 0x26;
1704 srbcmd->cdb[2] = (u8)((AAC_MAX_LUN + target) & 0x00FF);
1705 srbcmd->cdb[6] = CISS_IDENTIFY_PHYSICAL_DEVICE;
1707 sg64 = (struct sgmap64 *)&srbcmd->sg;
1708 sg64->count = cpu_to_le32(1);
1709 sg64->sg[0].addr[1] = cpu_to_le32((u32)(((addr) >> 16) >> 16));
1710 sg64->sg[0].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
1711 sg64->sg[0].count = cpu_to_le32(datasize);
1713 rcode = aac_fib_send(ScsiPortCommand64,
1714 fibptr, fibsize, FsaNormal, 1, 1, NULL, NULL);
1716 if (identify_resp->current_queue_depth_limit <= 0 ||
1717 identify_resp->current_queue_depth_limit > 32)
1718 dev->hba_map[bus][target].qd_limit = 32;
1720 dev->hba_map[bus][target].qd_limit =
1721 identify_resp->current_queue_depth_limit;
1723 dma_free_coherent(&dev->pdev->dev, datasize, identify_resp, addr);
1725 aac_fib_complete(fibptr);
1728 aac_fib_free(fibptr);
1734 * aac_update hba_map()- update current hba map with data from FW
1735 * @dev: aac_dev structure
1736 * @phys_luns: FW information from report phys luns
1738 * Update our hba map with the information gathered from the FW
1740 void aac_update_hba_map(struct aac_dev *dev,
1741 struct aac_ciss_phys_luns_resp *phys_luns, int rescan)
1743 /* ok and extended reporting */
1744 u32 lun_count, nexus;
1746 u8 expose_flag, attribs;
1749 lun_count = ((phys_luns->list_length[0] << 24)
1750 + (phys_luns->list_length[1] << 16)
1751 + (phys_luns->list_length[2] << 8)
1752 + (phys_luns->list_length[3])) / 24;
1754 for (i = 0; i < lun_count; ++i) {
1756 bus = phys_luns->lun[i].level2[1] & 0x3f;
1757 target = phys_luns->lun[i].level2[0];
1758 expose_flag = phys_luns->lun[i].bus >> 6;
1759 attribs = phys_luns->lun[i].node_ident[9];
1760 nexus = *((u32 *) &phys_luns->lun[i].node_ident[12]);
1762 if (bus >= AAC_MAX_BUSES || target >= AAC_MAX_TARGETS)
1765 dev->hba_map[bus][target].expose = expose_flag;
1767 if (expose_flag != 0) {
1768 devtype = AAC_DEVTYPE_RAID_MEMBER;
1769 goto update_devtype;
1772 if (nexus != 0 && (attribs & 8)) {
1773 devtype = AAC_DEVTYPE_NATIVE_RAW;
1774 dev->hba_map[bus][target].rmw_nexus =
1777 devtype = AAC_DEVTYPE_ARC_RAW;
1779 if (devtype != AAC_DEVTYPE_NATIVE_RAW)
1780 goto update_devtype;
1782 if (aac_issue_bmic_identify(dev, bus, target) < 0)
1783 dev->hba_map[bus][target].qd_limit = 32;
1786 if (rescan == AAC_INIT)
1787 dev->hba_map[bus][target].devtype = devtype;
1789 dev->hba_map[bus][target].new_devtype = devtype;
1794 * aac_report_phys_luns() Process topology change
1795 * @dev: aac_dev structure
1796 * @fibptr: fib pointer
1798 * Execute a CISS REPORT PHYS LUNS and process the results into
1799 * the current hba_map.
1801 int aac_report_phys_luns(struct aac_dev *dev, struct fib *fibptr, int rescan)
1803 int fibsize, datasize;
1804 struct aac_ciss_phys_luns_resp *phys_luns;
1805 struct aac_srb *srbcmd;
1806 struct sgmap64 *sg64;
1811 /* Thor SA Firmware -> CISS_REPORT_PHYSICAL_LUNS */
1812 fibsize = sizeof(struct aac_srb) - sizeof(struct sgentry)
1813 + sizeof(struct sgentry64);
1814 datasize = sizeof(struct aac_ciss_phys_luns_resp)
1815 + (AAC_MAX_TARGETS - 1) * sizeof(struct _ciss_lun);
1817 phys_luns = dma_alloc_coherent(&dev->pdev->dev, datasize, &addr,
1819 if (phys_luns == NULL) {
1824 vbus = (u32) le16_to_cpu(
1825 dev->supplement_adapter_info.virt_device_bus);
1826 vid = (u32) le16_to_cpu(
1827 dev->supplement_adapter_info.virt_device_target);
1829 aac_fib_init(fibptr);
1831 srbcmd = (struct aac_srb *) fib_data(fibptr);
1832 srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1833 srbcmd->channel = cpu_to_le32(vbus);
1834 srbcmd->id = cpu_to_le32(vid);
1836 srbcmd->flags = cpu_to_le32(SRB_DataIn);
1837 srbcmd->timeout = cpu_to_le32(10);
1838 srbcmd->retry_limit = 0;
1839 srbcmd->cdb_size = cpu_to_le32(12);
1840 srbcmd->count = cpu_to_le32(datasize);
1842 memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1843 srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS;
1844 srbcmd->cdb[1] = 2; /* extended reporting */
1845 srbcmd->cdb[8] = (u8)(datasize >> 8);
1846 srbcmd->cdb[9] = (u8)(datasize);
1848 sg64 = (struct sgmap64 *) &srbcmd->sg;
1849 sg64->count = cpu_to_le32(1);
1850 sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr));
1851 sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr));
1852 sg64->sg[0].count = cpu_to_le32(datasize);
1854 rcode = aac_fib_send(ScsiPortCommand64, fibptr, fibsize,
1855 FsaNormal, 1, 1, NULL, NULL);
1858 if (rcode >= 0 && phys_luns->resp_flag == 2) {
1859 /* ok and extended reporting */
1860 aac_update_hba_map(dev, phys_luns, rescan);
1863 dma_free_coherent(&dev->pdev->dev, datasize, phys_luns, addr);
1868 int aac_get_adapter_info(struct aac_dev* dev)
1872 u32 tmp, bus, target;
1873 struct aac_adapter_info *info;
1874 struct aac_bus_info *command;
1875 struct aac_bus_info_response *bus_info;
1877 if (!(fibptr = aac_fib_alloc(dev)))
1880 aac_fib_init(fibptr);
1881 info = (struct aac_adapter_info *) fib_data(fibptr);
1882 memset(info,0,sizeof(*info));
1884 rcode = aac_fib_send(RequestAdapterInfo,
1888 -1, 1, /* First `interrupt' command uses special wait */
1893 /* FIB should be freed only after
1894 * getting the response from the F/W */
1895 if (rcode != -ERESTARTSYS) {
1896 aac_fib_complete(fibptr);
1897 aac_fib_free(fibptr);
1901 memcpy(&dev->adapter_info, info, sizeof(*info));
1903 dev->supplement_adapter_info.virt_device_bus = 0xffff;
1904 if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
1905 struct aac_supplement_adapter_info * sinfo;
1907 aac_fib_init(fibptr);
1909 sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr);
1911 memset(sinfo,0,sizeof(*sinfo));
1913 rcode = aac_fib_send(RequestSupplementAdapterInfo,
1922 memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
1923 if (rcode == -ERESTARTSYS) {
1924 fibptr = aac_fib_alloc(dev);
1931 /* reset all previous mapped devices (i.e. for init. after IOP_RESET) */
1932 for (bus = 0; bus < AAC_MAX_BUSES; bus++) {
1933 for (target = 0; target < AAC_MAX_TARGETS; target++) {
1934 dev->hba_map[bus][target].devtype = 0;
1935 dev->hba_map[bus][target].qd_limit = 0;
1943 aac_fib_init(fibptr);
1945 bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
1947 memset(bus_info, 0, sizeof(*bus_info));
1949 command = (struct aac_bus_info *)bus_info;
1951 command->Command = cpu_to_le32(VM_Ioctl);
1952 command->ObjType = cpu_to_le32(FT_DRIVE);
1953 command->MethodId = cpu_to_le32(1);
1954 command->CtlCmd = cpu_to_le32(GetBusInfo);
1956 rcode = aac_fib_send(ContainerCommand,
1963 /* reasoned default */
1964 dev->maximum_num_physicals = 16;
1965 if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
1966 dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
1967 dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
1970 if (!dev->sync_mode && dev->sa_firmware &&
1971 dev->supplement_adapter_info.virt_device_bus != 0xffff) {
1972 /* Thor SA Firmware -> CISS_REPORT_PHYSICAL_LUNS */
1973 rcode = aac_report_phys_luns(dev, fibptr, AAC_INIT);
1976 if (!dev->in_reset) {
1978 tmp = le32_to_cpu(dev->adapter_info.kernelrev);
1979 printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
1985 le32_to_cpu(dev->adapter_info.kernelbuild),
1986 (int)sizeof(dev->supplement_adapter_info.build_date),
1987 dev->supplement_adapter_info.build_date);
1988 tmp = le32_to_cpu(dev->adapter_info.monitorrev);
1989 printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
1991 tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1992 le32_to_cpu(dev->adapter_info.monitorbuild));
1993 tmp = le32_to_cpu(dev->adapter_info.biosrev);
1994 printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
1996 tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1997 le32_to_cpu(dev->adapter_info.biosbuild));
1999 if (aac_get_serial_number(
2000 shost_to_class(dev->scsi_host_ptr), buffer))
2001 printk(KERN_INFO "%s%d: serial %s",
2002 dev->name, dev->id, buffer);
2003 if (dev->supplement_adapter_info.vpd_info.tsid[0]) {
2004 printk(KERN_INFO "%s%d: TSID %.*s\n",
2006 (int)sizeof(dev->supplement_adapter_info
2008 dev->supplement_adapter_info.vpd_info.tsid);
2010 if (!aac_check_reset || ((aac_check_reset == 1) &&
2011 (dev->supplement_adapter_info.supported_options2 &
2012 AAC_OPTION_IGNORE_RESET))) {
2013 printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
2014 dev->name, dev->id);
2018 dev->cache_protected = 0;
2019 dev->jbod = ((dev->supplement_adapter_info.feature_bits &
2020 AAC_FEATURE_JBOD) != 0);
2021 dev->nondasd_support = 0;
2022 dev->raid_scsi_mode = 0;
2023 if(dev->adapter_info.options & AAC_OPT_NONDASD)
2024 dev->nondasd_support = 1;
2027 * If the firmware supports ROMB RAID/SCSI mode and we are currently
2028 * in RAID/SCSI mode, set the flag. For now if in this mode we will
2029 * force nondasd support on. If we decide to allow the non-dasd flag
2030 * additional changes changes will have to be made to support
2031 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
2032 * changed to support the new dev->raid_scsi_mode flag instead of
2033 * leaching off of the dev->nondasd_support flag. Also in linit.c the
2034 * function aac_detect will have to be modified where it sets up the
2035 * max number of channels based on the aac->nondasd_support flag only.
2037 if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
2038 (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
2039 dev->nondasd_support = 1;
2040 dev->raid_scsi_mode = 1;
2042 if (dev->raid_scsi_mode != 0)
2043 printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
2044 dev->name, dev->id);
2047 dev->nondasd_support = (nondasd!=0);
2048 if (dev->nondasd_support && !dev->in_reset)
2049 printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
2051 if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
2053 dev->dac_support = 0;
2054 if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
2055 (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) {
2057 printk(KERN_INFO "%s%d: 64bit support enabled.\n",
2058 dev->name, dev->id);
2059 dev->dac_support = 1;
2063 dev->dac_support = (dacmode!=0);
2066 /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
2067 if (dev->dac_support && (aac_get_driver_ident(dev->cardtype)->quirks
2068 & AAC_QUIRK_SCSI_32)) {
2069 dev->nondasd_support = 0;
2071 expose_physicals = 0;
2074 if (dev->dac_support) {
2075 if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
2077 dev_info(&dev->pdev->dev, "64 Bit DAC enabled\n");
2078 } else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
2079 dev_info(&dev->pdev->dev, "DMA mask set failed, 64 Bit DAC disabled\n");
2080 dev->dac_support = 0;
2082 dev_info(&dev->pdev->dev, "No suitable DMA available\n");
2087 * Deal with configuring for the individualized limits of each packet
2090 dev->a_ops.adapter_scsi = (dev->dac_support)
2091 ? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32)
2095 if (dev->raw_io_interface) {
2096 dev->a_ops.adapter_bounds = (dev->raw_io_64)
2099 dev->a_ops.adapter_read = aac_read_raw_io;
2100 dev->a_ops.adapter_write = aac_write_raw_io;
2102 dev->a_ops.adapter_bounds = aac_bounds_32;
2103 dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
2104 sizeof(struct aac_fibhdr) -
2105 sizeof(struct aac_write) + sizeof(struct sgentry)) /
2106 sizeof(struct sgentry);
2107 if (dev->dac_support) {
2108 dev->a_ops.adapter_read = aac_read_block64;
2109 dev->a_ops.adapter_write = aac_write_block64;
2111 * 38 scatter gather elements
2113 dev->scsi_host_ptr->sg_tablesize =
2114 (dev->max_fib_size -
2115 sizeof(struct aac_fibhdr) -
2116 sizeof(struct aac_write64) +
2117 sizeof(struct sgentry64)) /
2118 sizeof(struct sgentry64);
2120 dev->a_ops.adapter_read = aac_read_block;
2121 dev->a_ops.adapter_write = aac_write_block;
2123 dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
2124 if (!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
2126 * Worst case size that could cause sg overflow when
2127 * we break up SG elements that are larger than 64KB.
2128 * Would be nice if we could tell the SCSI layer what
2129 * the maximum SG element size can be. Worst case is
2130 * (sg_tablesize-1) 4KB elements with one 64KB
2132 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
2134 dev->scsi_host_ptr->max_sectors =
2135 (dev->scsi_host_ptr->sg_tablesize * 8) + 112;
2138 if (!dev->sync_mode && dev->sa_firmware &&
2139 dev->scsi_host_ptr->sg_tablesize > HBA_MAX_SG_SEPARATE)
2140 dev->scsi_host_ptr->sg_tablesize = dev->sg_tablesize =
2141 HBA_MAX_SG_SEPARATE;
2143 /* FIB should be freed only after getting the response from the F/W */
2144 if (rcode != -ERESTARTSYS) {
2145 aac_fib_complete(fibptr);
2146 aac_fib_free(fibptr);
2153 static void io_callback(void *context, struct fib * fibptr)
2155 struct aac_dev *dev;
2156 struct aac_read_reply *readreply;
2157 struct scsi_cmnd *scsicmd;
2160 scsicmd = (struct scsi_cmnd *) context;
2162 if (!aac_valid_context(scsicmd, fibptr))
2166 cid = scmd_id(scsicmd);
2168 if (nblank(dprintk(x))) {
2170 switch (scsicmd->cmnd[0]) {
2173 lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
2174 (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
2178 lba = ((u64)scsicmd->cmnd[2] << 56) |
2179 ((u64)scsicmd->cmnd[3] << 48) |
2180 ((u64)scsicmd->cmnd[4] << 40) |
2181 ((u64)scsicmd->cmnd[5] << 32) |
2182 ((u64)scsicmd->cmnd[6] << 24) |
2183 (scsicmd->cmnd[7] << 16) |
2184 (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2188 lba = ((u64)scsicmd->cmnd[2] << 24) |
2189 (scsicmd->cmnd[3] << 16) |
2190 (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2193 lba = ((u64)scsicmd->cmnd[2] << 24) |
2194 (scsicmd->cmnd[3] << 16) |
2195 (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2199 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
2200 smp_processor_id(), (unsigned long long)lba, jiffies);
2203 BUG_ON(fibptr == NULL);
2205 scsi_dma_unmap(scsicmd);
2207 readreply = (struct aac_read_reply *)fib_data(fibptr);
2208 switch (le32_to_cpu(readreply->status)) {
2210 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2212 dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
2215 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2216 SAM_STAT_CHECK_CONDITION;
2217 set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
2218 SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
2219 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2220 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2221 SCSI_SENSE_BUFFERSIZE));
2224 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2225 SAM_STAT_CHECK_CONDITION;
2226 set_sense(&dev->fsa_dev[cid].sense_data, MEDIUM_ERROR,
2227 SENCODE_UNRECOVERED_READ_ERROR, ASENCODE_NO_SENSE, 0, 0);
2228 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2229 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2230 SCSI_SENSE_BUFFERSIZE));
2233 #ifdef AAC_DETAILED_STATUS_INFO
2234 printk(KERN_WARNING "io_callback: io failed, status = %d\n",
2235 le32_to_cpu(readreply->status));
2237 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2238 SAM_STAT_CHECK_CONDITION;
2239 set_sense(&dev->fsa_dev[cid].sense_data,
2240 HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2241 ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2242 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2243 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2244 SCSI_SENSE_BUFFERSIZE));
2247 aac_fib_complete(fibptr);
2249 scsicmd->scsi_done(scsicmd);
2252 static int aac_read(struct scsi_cmnd * scsicmd)
2257 struct aac_dev *dev;
2258 struct fib * cmd_fibcontext;
2261 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2263 * Get block address and transfer length
2265 switch (scsicmd->cmnd[0]) {
2267 dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
2269 lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
2270 (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
2271 count = scsicmd->cmnd[4];
2277 dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
2279 lba = ((u64)scsicmd->cmnd[2] << 56) |
2280 ((u64)scsicmd->cmnd[3] << 48) |
2281 ((u64)scsicmd->cmnd[4] << 40) |
2282 ((u64)scsicmd->cmnd[5] << 32) |
2283 ((u64)scsicmd->cmnd[6] << 24) |
2284 (scsicmd->cmnd[7] << 16) |
2285 (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2286 count = (scsicmd->cmnd[10] << 24) |
2287 (scsicmd->cmnd[11] << 16) |
2288 (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
2291 dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
2293 lba = ((u64)scsicmd->cmnd[2] << 24) |
2294 (scsicmd->cmnd[3] << 16) |
2295 (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2296 count = (scsicmd->cmnd[6] << 24) |
2297 (scsicmd->cmnd[7] << 16) |
2298 (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2301 dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
2303 lba = ((u64)scsicmd->cmnd[2] << 24) |
2304 (scsicmd->cmnd[3] << 16) |
2305 (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2306 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
2310 if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
2311 cid = scmd_id(scsicmd);
2312 dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
2313 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2314 SAM_STAT_CHECK_CONDITION;
2315 set_sense(&dev->fsa_dev[cid].sense_data,
2316 HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2317 ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2318 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2319 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2320 SCSI_SENSE_BUFFERSIZE));
2321 scsicmd->scsi_done(scsicmd);
2325 dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
2326 smp_processor_id(), (unsigned long long)lba, jiffies));
2327 if (aac_adapter_bounds(dev,scsicmd,lba))
2330 * Alocate and initialize a Fib
2332 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
2334 status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
2337 * Check that the command queued to the controller
2339 if (status == -EINPROGRESS) {
2340 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2344 printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
2346 * For some reason, the Fib didn't queue, return QUEUE_FULL
2348 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
2349 scsicmd->scsi_done(scsicmd);
2350 aac_fib_complete(cmd_fibcontext);
2351 aac_fib_free(cmd_fibcontext);
2355 static int aac_write(struct scsi_cmnd * scsicmd)
2361 struct aac_dev *dev;
2362 struct fib * cmd_fibcontext;
2365 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2367 * Get block address and transfer length
2369 if (scsicmd->cmnd[0] == WRITE_6) /* 6 byte command */
2371 lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
2372 count = scsicmd->cmnd[4];
2376 } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
2377 dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
2379 lba = ((u64)scsicmd->cmnd[2] << 56) |
2380 ((u64)scsicmd->cmnd[3] << 48) |
2381 ((u64)scsicmd->cmnd[4] << 40) |
2382 ((u64)scsicmd->cmnd[5] << 32) |
2383 ((u64)scsicmd->cmnd[6] << 24) |
2384 (scsicmd->cmnd[7] << 16) |
2385 (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2386 count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
2387 (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
2388 fua = scsicmd->cmnd[1] & 0x8;
2389 } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
2390 dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
2392 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
2393 | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2394 count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
2395 | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2396 fua = scsicmd->cmnd[1] & 0x8;
2398 dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
2399 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2400 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
2401 fua = scsicmd->cmnd[1] & 0x8;
2404 if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
2405 cid = scmd_id(scsicmd);
2406 dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
2407 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2408 SAM_STAT_CHECK_CONDITION;
2409 set_sense(&dev->fsa_dev[cid].sense_data,
2410 HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2411 ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2412 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2413 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2414 SCSI_SENSE_BUFFERSIZE));
2415 scsicmd->scsi_done(scsicmd);
2419 dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
2420 smp_processor_id(), (unsigned long long)lba, jiffies));
2421 if (aac_adapter_bounds(dev,scsicmd,lba))
2424 * Allocate and initialize a Fib then setup a BlockWrite command
2426 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
2428 status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
2431 * Check that the command queued to the controller
2433 if (status == -EINPROGRESS) {
2434 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2438 printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
2440 * For some reason, the Fib didn't queue, return QUEUE_FULL
2442 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
2443 scsicmd->scsi_done(scsicmd);
2445 aac_fib_complete(cmd_fibcontext);
2446 aac_fib_free(cmd_fibcontext);
2450 static void synchronize_callback(void *context, struct fib *fibptr)
2452 struct aac_synchronize_reply *synchronizereply;
2453 struct scsi_cmnd *cmd;
2457 if (!aac_valid_context(cmd, fibptr))
2460 dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
2461 smp_processor_id(), jiffies));
2462 BUG_ON(fibptr == NULL);
2465 synchronizereply = fib_data(fibptr);
2466 if (le32_to_cpu(synchronizereply->status) == CT_OK)
2467 cmd->result = DID_OK << 16 |
2468 COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2470 struct scsi_device *sdev = cmd->device;
2471 struct aac_dev *dev = fibptr->dev;
2472 u32 cid = sdev_id(sdev);
2474 "synchronize_callback: synchronize failed, status = %d\n",
2475 le32_to_cpu(synchronizereply->status));
2476 cmd->result = DID_OK << 16 |
2477 COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2478 set_sense(&dev->fsa_dev[cid].sense_data,
2479 HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2480 ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2481 memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2482 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2483 SCSI_SENSE_BUFFERSIZE));
2486 aac_fib_complete(fibptr);
2487 aac_fib_free(fibptr);
2488 cmd->scsi_done(cmd);
2491 static int aac_synchronize(struct scsi_cmnd *scsicmd)
2494 struct fib *cmd_fibcontext;
2495 struct aac_synchronize *synchronizecmd;
2496 struct scsi_cmnd *cmd;
2497 struct scsi_device *sdev = scsicmd->device;
2499 struct aac_dev *aac;
2500 u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
2501 (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2502 u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
2503 unsigned long flags;
2506 * Wait for all outstanding queued commands to complete to this
2507 * specific target (block).
2509 spin_lock_irqsave(&sdev->list_lock, flags);
2510 list_for_each_entry(cmd, &sdev->cmd_list, list)
2511 if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
2515 if (cmd->cmnd[0] == WRITE_6) {
2516 cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
2517 (cmd->cmnd[2] << 8) |
2519 cmnd_count = cmd->cmnd[4];
2520 if (cmnd_count == 0)
2522 } else if (cmd->cmnd[0] == WRITE_16) {
2523 cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
2524 ((u64)cmd->cmnd[3] << 48) |
2525 ((u64)cmd->cmnd[4] << 40) |
2526 ((u64)cmd->cmnd[5] << 32) |
2527 ((u64)cmd->cmnd[6] << 24) |
2528 (cmd->cmnd[7] << 16) |
2529 (cmd->cmnd[8] << 8) |
2531 cmnd_count = (cmd->cmnd[10] << 24) |
2532 (cmd->cmnd[11] << 16) |
2533 (cmd->cmnd[12] << 8) |
2535 } else if (cmd->cmnd[0] == WRITE_12) {
2536 cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
2537 (cmd->cmnd[3] << 16) |
2538 (cmd->cmnd[4] << 8) |
2540 cmnd_count = (cmd->cmnd[6] << 24) |
2541 (cmd->cmnd[7] << 16) |
2542 (cmd->cmnd[8] << 8) |
2544 } else if (cmd->cmnd[0] == WRITE_10) {
2545 cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
2546 (cmd->cmnd[3] << 16) |
2547 (cmd->cmnd[4] << 8) |
2549 cmnd_count = (cmd->cmnd[7] << 8) |
2553 if (((cmnd_lba + cmnd_count) < lba) ||
2554 (count && ((lba + count) < cmnd_lba)))
2560 spin_unlock_irqrestore(&sdev->list_lock, flags);
2563 * Yield the processor (requeue for later)
2566 return SCSI_MLQUEUE_DEVICE_BUSY;
2568 aac = (struct aac_dev *)sdev->host->hostdata;
2570 return SCSI_MLQUEUE_HOST_BUSY;
2573 * Allocate and initialize a Fib
2575 if (!(cmd_fibcontext = aac_fib_alloc(aac)))
2576 return SCSI_MLQUEUE_HOST_BUSY;
2578 aac_fib_init(cmd_fibcontext);
2580 synchronizecmd = fib_data(cmd_fibcontext);
2581 synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
2582 synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
2583 synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
2584 synchronizecmd->count =
2585 cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
2588 * Now send the Fib to the adapter
2590 status = aac_fib_send(ContainerCommand,
2592 sizeof(struct aac_synchronize),
2595 (fib_callback)synchronize_callback,
2599 * Check that the command queued to the controller
2601 if (status == -EINPROGRESS) {
2602 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2607 "aac_synchronize: aac_fib_send failed with status: %d.\n", status);
2608 aac_fib_complete(cmd_fibcontext);
2609 aac_fib_free(cmd_fibcontext);
2610 return SCSI_MLQUEUE_HOST_BUSY;
2613 static void aac_start_stop_callback(void *context, struct fib *fibptr)
2615 struct scsi_cmnd *scsicmd = context;
2617 if (!aac_valid_context(scsicmd, fibptr))
2620 BUG_ON(fibptr == NULL);
2622 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2624 aac_fib_complete(fibptr);
2625 aac_fib_free(fibptr);
2626 scsicmd->scsi_done(scsicmd);
2629 static int aac_start_stop(struct scsi_cmnd *scsicmd)
2632 struct fib *cmd_fibcontext;
2633 struct aac_power_management *pmcmd;
2634 struct scsi_device *sdev = scsicmd->device;
2635 struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
2637 if (!(aac->supplement_adapter_info.supported_options2 &
2638 AAC_OPTION_POWER_MANAGEMENT)) {
2639 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2641 scsicmd->scsi_done(scsicmd);
2646 return SCSI_MLQUEUE_HOST_BUSY;
2649 * Allocate and initialize a Fib
2651 cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
2653 aac_fib_init(cmd_fibcontext);
2655 pmcmd = fib_data(cmd_fibcontext);
2656 pmcmd->command = cpu_to_le32(VM_ContainerConfig);
2657 pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
2658 /* Eject bit ignored, not relevant */
2659 pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
2660 cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
2661 pmcmd->cid = cpu_to_le32(sdev_id(sdev));
2662 pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
2663 cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
2666 * Now send the Fib to the adapter
2668 status = aac_fib_send(ContainerCommand,
2670 sizeof(struct aac_power_management),
2673 (fib_callback)aac_start_stop_callback,
2677 * Check that the command queued to the controller
2679 if (status == -EINPROGRESS) {
2680 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2684 aac_fib_complete(cmd_fibcontext);
2685 aac_fib_free(cmd_fibcontext);
2686 return SCSI_MLQUEUE_HOST_BUSY;
2690 * aac_scsi_cmd() - Process SCSI command
2691 * @scsicmd: SCSI command block
2693 * Emulate a SCSI command and queue the required request for the
2697 int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
2700 struct Scsi_Host *host = scsicmd->device->host;
2701 struct aac_dev *dev = (struct aac_dev *)host->hostdata;
2702 struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
2704 if (fsa_dev_ptr == NULL)
2707 * If the bus, id or lun is out of range, return fail
2708 * Test does not apply to ID 16, the pseudo id for the controller
2711 cid = scmd_id(scsicmd);
2712 if (cid != host->this_id) {
2713 if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) {
2714 if((cid >= dev->maximum_num_containers) ||
2715 (scsicmd->device->lun != 0)) {
2716 scsicmd->result = DID_NO_CONNECT << 16;
2721 * If the target container doesn't exist, it may have
2722 * been newly created
2724 if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
2725 (fsa_dev_ptr[cid].sense_data.sense_key ==
2727 switch (scsicmd->cmnd[0]) {
2728 case SERVICE_ACTION_IN_16:
2729 if (!(dev->raw_io_interface) ||
2730 !(dev->raw_io_64) ||
2731 ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2735 case TEST_UNIT_READY:
2738 return _aac_probe_container(scsicmd,
2739 aac_probe_container_callback2);
2744 } else { /* check for physical non-dasd devices */
2745 bus = aac_logical_to_phys(scmd_channel(scsicmd));
2746 if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
2747 (dev->hba_map[bus][cid].expose
2749 if (scsicmd->cmnd[0] == INQUIRY) {
2750 scsicmd->result = DID_NO_CONNECT << 16;
2755 if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
2756 dev->hba_map[bus][cid].devtype
2757 == AAC_DEVTYPE_NATIVE_RAW) {
2760 return aac_send_hba_fib(scsicmd);
2761 } else if (dev->nondasd_support || expose_physicals ||
2765 return aac_send_srb_fib(scsicmd);
2767 scsicmd->result = DID_NO_CONNECT << 16;
2773 * else Command for the controller itself
2775 else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */
2776 (scsicmd->cmnd[0] != TEST_UNIT_READY))
2778 dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
2779 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2780 set_sense(&dev->fsa_dev[cid].sense_data,
2781 ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2782 ASENCODE_INVALID_COMMAND, 0, 0);
2783 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2784 min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2785 SCSI_SENSE_BUFFERSIZE));
2789 switch (scsicmd->cmnd[0]) {
2796 return aac_read(scsicmd);
2804 return aac_write(scsicmd);
2806 case SYNCHRONIZE_CACHE:
2807 if (((aac_cache & 6) == 6) && dev->cache_protected) {
2808 scsicmd->result = AAC_STAT_GOOD;
2811 /* Issue FIB to tell Firmware to flush it's cache */
2812 if ((aac_cache & 6) != 2)
2813 return aac_synchronize(scsicmd);
2816 struct inquiry_data inq_data;
2818 dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
2819 memset(&inq_data, 0, sizeof (struct inquiry_data));
2821 if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) {
2822 char *arr = (char *)&inq_data;
2825 arr[0] = (scmd_id(scsicmd) == host->this_id) ?
2826 INQD_PDT_PROC : INQD_PDT_DA;
2827 if (scsicmd->cmnd[2] == 0) {
2828 /* supported vital product data pages */
2833 arr[1] = scsicmd->cmnd[2];
2834 scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2836 scsicmd->result = AAC_STAT_GOOD;
2837 } else if (scsicmd->cmnd[2] == 0x80) {
2838 /* unit serial number page */
2839 arr[3] = setinqserial(dev, &arr[4],
2841 arr[1] = scsicmd->cmnd[2];
2842 scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2845 return aac_get_container_serial(
2847 scsicmd->result = AAC_STAT_GOOD;
2848 } else if (scsicmd->cmnd[2] == 0x83) {
2849 /* vpd page 0x83 - Device Identification Page */
2850 char *sno = (char *)&inq_data;
2851 sno[3] = setinqserial(dev, &sno[4],
2854 return aac_get_container_serial(
2856 scsicmd->result = AAC_STAT_GOOD;
2858 /* vpd page not implemented */
2859 scsicmd->result = DID_OK << 16 |
2860 COMMAND_COMPLETE << 8 |
2861 SAM_STAT_CHECK_CONDITION;
2862 set_sense(&dev->fsa_dev[cid].sense_data,
2863 ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD,
2864 ASENCODE_NO_SENSE, 7, 2);
2865 memcpy(scsicmd->sense_buffer,
2866 &dev->fsa_dev[cid].sense_data,
2868 sizeof(dev->fsa_dev[cid].sense_data),
2869 SCSI_SENSE_BUFFERSIZE));
2873 inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */
2874 inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2875 inq_data.inqd_len = 31;
2876 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2877 inq_data.inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
2879 * Set the Vendor, Product, and Revision Level
2880 * see: <vendor>.c i.e. aac.c
2882 if (cid == host->this_id) {
2883 setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types));
2884 inq_data.inqd_pdt = INQD_PDT_PROC; /* Processor device */
2885 scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2887 scsicmd->result = AAC_STAT_GOOD;
2892 setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
2893 inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
2894 scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
2895 return aac_get_container_name(scsicmd);
2897 case SERVICE_ACTION_IN_16:
2898 if (!(dev->raw_io_interface) ||
2899 !(dev->raw_io_64) ||
2900 ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2905 unsigned int alloc_len;
2907 dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
2908 capacity = fsa_dev_ptr[cid].size - 1;
2909 cp[0] = (capacity >> 56) & 0xff;
2910 cp[1] = (capacity >> 48) & 0xff;
2911 cp[2] = (capacity >> 40) & 0xff;
2912 cp[3] = (capacity >> 32) & 0xff;
2913 cp[4] = (capacity >> 24) & 0xff;
2914 cp[5] = (capacity >> 16) & 0xff;
2915 cp[6] = (capacity >> 8) & 0xff;
2916 cp[7] = (capacity >> 0) & 0xff;
2917 cp[8] = (fsa_dev_ptr[cid].block_size >> 24) & 0xff;
2918 cp[9] = (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2919 cp[10] = (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
2920 cp[11] = (fsa_dev_ptr[cid].block_size) & 0xff;
2923 alloc_len = ((scsicmd->cmnd[10] << 24)
2924 + (scsicmd->cmnd[11] << 16)
2925 + (scsicmd->cmnd[12] << 8) + scsicmd->cmnd[13]);
2927 alloc_len = min_t(size_t, alloc_len, sizeof(cp));
2928 scsi_sg_copy_from_buffer(scsicmd, cp, alloc_len);
2929 if (alloc_len < scsi_bufflen(scsicmd))
2930 scsi_set_resid(scsicmd,
2931 scsi_bufflen(scsicmd) - alloc_len);
2933 /* Do not cache partition table for arrays */
2934 scsicmd->device->removable = 1;
2936 scsicmd->result = AAC_STAT_GOOD;
2945 dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
2946 if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2947 capacity = fsa_dev_ptr[cid].size - 1;
2951 cp[0] = (capacity >> 24) & 0xff;
2952 cp[1] = (capacity >> 16) & 0xff;
2953 cp[2] = (capacity >> 8) & 0xff;
2954 cp[3] = (capacity >> 0) & 0xff;
2955 cp[4] = (fsa_dev_ptr[cid].block_size >> 24) & 0xff;
2956 cp[5] = (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2957 cp[6] = (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
2958 cp[7] = (fsa_dev_ptr[cid].block_size) & 0xff;
2959 scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
2960 /* Do not cache partition table for arrays */
2961 scsicmd->device->removable = 1;
2962 scsicmd->result = AAC_STAT_GOOD;
2968 int mode_buf_length = 4;
2972 if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2973 capacity = fsa_dev_ptr[cid].size - 1;
2977 dprintk((KERN_DEBUG "MODE SENSE command.\n"));
2978 memset((char *)&mpd, 0, sizeof(aac_modep_data));
2980 /* Mode data length */
2981 mpd.hd.data_length = sizeof(mpd.hd) - 1;
2982 /* Medium type - default */
2983 mpd.hd.med_type = 0;
2984 /* Device-specific param,
2985 bit 8: 0/1 = write enabled/protected
2986 bit 4: 0/1 = FUA enabled */
2989 if (dev->raw_io_interface && ((aac_cache & 5) != 1))
2990 mpd.hd.dev_par = 0x10;
2991 if (scsicmd->cmnd[1] & 0x8)
2992 mpd.hd.bd_length = 0; /* Block descriptor length */
2994 mpd.hd.bd_length = sizeof(mpd.bd);
2995 mpd.hd.data_length += mpd.hd.bd_length;
2996 mpd.bd.block_length[0] =
2997 (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2998 mpd.bd.block_length[1] =
2999 (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
3000 mpd.bd.block_length[2] =
3001 fsa_dev_ptr[cid].block_size & 0xff;
3003 mpd.mpc_buf[0] = scsicmd->cmnd[2];
3004 if (scsicmd->cmnd[2] == 0x1C) {
3006 mpd.mpc_buf[1] = 0xa;
3007 /* Mode data length */
3008 mpd.hd.data_length = 23;
3010 /* Mode data length */
3011 mpd.hd.data_length = 15;
3014 if (capacity > 0xffffff) {
3015 mpd.bd.block_count[0] = 0xff;
3016 mpd.bd.block_count[1] = 0xff;
3017 mpd.bd.block_count[2] = 0xff;
3019 mpd.bd.block_count[0] = (capacity >> 16) & 0xff;
3020 mpd.bd.block_count[1] = (capacity >> 8) & 0xff;
3021 mpd.bd.block_count[2] = capacity & 0xff;
3024 if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
3025 ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
3026 mpd.hd.data_length += 3;
3029 mpd.mpc_buf[2] = ((aac_cache & 6) == 2)
3030 ? 0 : 0x04; /* WCE */
3031 mode_buf_length = sizeof(mpd);
3034 if (mode_buf_length > scsicmd->cmnd[4])
3035 mode_buf_length = scsicmd->cmnd[4];
3037 mode_buf_length = sizeof(mpd);
3038 scsi_sg_copy_from_buffer(scsicmd,
3041 scsicmd->result = AAC_STAT_GOOD;
3047 int mode_buf_length = 8;
3048 aac_modep10_data mpd10;
3050 if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
3051 capacity = fsa_dev_ptr[cid].size - 1;
3055 dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
3056 memset((char *)&mpd10, 0, sizeof(aac_modep10_data));
3057 /* Mode data length (MSB) */
3058 mpd10.hd.data_length[0] = 0;
3059 /* Mode data length (LSB) */
3060 mpd10.hd.data_length[1] = sizeof(mpd10.hd) - 1;
3061 /* Medium type - default */
3062 mpd10.hd.med_type = 0;
3063 /* Device-specific param,
3064 bit 8: 0/1 = write enabled/protected
3065 bit 4: 0/1 = FUA enabled */
3066 mpd10.hd.dev_par = 0;
3068 if (dev->raw_io_interface && ((aac_cache & 5) != 1))
3069 mpd10.hd.dev_par = 0x10;
3070 mpd10.hd.rsrvd[0] = 0; /* reserved */
3071 mpd10.hd.rsrvd[1] = 0; /* reserved */
3072 if (scsicmd->cmnd[1] & 0x8) {
3073 /* Block descriptor length (MSB) */
3074 mpd10.hd.bd_length[0] = 0;
3075 /* Block descriptor length (LSB) */
3076 mpd10.hd.bd_length[1] = 0;
3078 mpd10.hd.bd_length[0] = 0;
3079 mpd10.hd.bd_length[1] = sizeof(mpd10.bd);
3081 mpd10.hd.data_length[1] += mpd10.hd.bd_length[1];
3083 mpd10.bd.block_length[0] =
3084 (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
3085 mpd10.bd.block_length[1] =
3086 (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
3087 mpd10.bd.block_length[2] =
3088 fsa_dev_ptr[cid].block_size & 0xff;
3090 if (capacity > 0xffffff) {
3091 mpd10.bd.block_count[0] = 0xff;
3092 mpd10.bd.block_count[1] = 0xff;
3093 mpd10.bd.block_count[2] = 0xff;
3095 mpd10.bd.block_count[0] =
3096 (capacity >> 16) & 0xff;
3097 mpd10.bd.block_count[1] =
3098 (capacity >> 8) & 0xff;
3099 mpd10.bd.block_count[2] =
3103 if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
3104 ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
3105 mpd10.hd.data_length[1] += 3;
3106 mpd10.mpc_buf[0] = 8;
3107 mpd10.mpc_buf[1] = 1;
3108 mpd10.mpc_buf[2] = ((aac_cache & 6) == 2)
3109 ? 0 : 0x04; /* WCE */
3110 mode_buf_length = sizeof(mpd10);
3111 if (mode_buf_length > scsicmd->cmnd[8])
3112 mode_buf_length = scsicmd->cmnd[8];
3114 scsi_sg_copy_from_buffer(scsicmd,
3118 scsicmd->result = AAC_STAT_GOOD;
3122 dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
3123 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
3124 sizeof(struct sense_data));
3125 memset(&dev->fsa_dev[cid].sense_data, 0,
3126 sizeof(struct sense_data));
3127 scsicmd->result = AAC_STAT_GOOD;
3130 case ALLOW_MEDIUM_REMOVAL:
3131 dprintk((KERN_DEBUG "LOCK command.\n"));
3132 if (scsicmd->cmnd[4])
3133 fsa_dev_ptr[cid].locked = 1;
3135 fsa_dev_ptr[cid].locked = 0;
3137 scsicmd->result = AAC_STAT_GOOD;
3140 * These commands are all No-Ops
3142 case TEST_UNIT_READY:
3143 if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
3144 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
3145 SAM_STAT_CHECK_CONDITION;
3146 set_sense(&dev->fsa_dev[cid].sense_data,
3147 NOT_READY, SENCODE_BECOMING_READY,
3148 ASENCODE_BECOMING_READY, 0, 0);
3149 memcpy(scsicmd->sense_buffer,
3150 &dev->fsa_dev[cid].sense_data,
3152 sizeof(dev->fsa_dev[cid].sense_data),
3153 SCSI_SENSE_BUFFERSIZE));
3159 case REASSIGN_BLOCKS:
3161 scsicmd->result = AAC_STAT_GOOD;
3165 return aac_start_stop(scsicmd);
3170 * Unhandled commands
3172 dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n",
3174 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
3175 SAM_STAT_CHECK_CONDITION;
3176 set_sense(&dev->fsa_dev[cid].sense_data,
3177 ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
3178 ASENCODE_INVALID_COMMAND, 0, 0);
3179 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
3181 sizeof(dev->fsa_dev[cid].sense_data),
3182 SCSI_SENSE_BUFFERSIZE));
3187 scsicmd->scsi_done(scsicmd);
3191 static int query_disk(struct aac_dev *dev, void __user *arg)
3193 struct aac_query_disk qd;
3194 struct fsa_dev_info *fsa_dev_ptr;
3196 fsa_dev_ptr = dev->fsa_dev;
3199 if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
3201 if (qd.cnum == -1) {
3202 if (qd.id < 0 || qd.id >= dev->maximum_num_containers)
3205 } else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) {
3206 if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
3208 qd.instance = dev->scsi_host_ptr->host_no;
3210 qd.id = CONTAINER_TO_ID(qd.cnum);
3211 qd.lun = CONTAINER_TO_LUN(qd.cnum);
3213 else return -EINVAL;
3215 qd.valid = fsa_dev_ptr[qd.cnum].valid != 0;
3216 qd.locked = fsa_dev_ptr[qd.cnum].locked;
3217 qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
3219 if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
3224 strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
3225 min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
3227 if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
3232 static int force_delete_disk(struct aac_dev *dev, void __user *arg)
3234 struct aac_delete_disk dd;
3235 struct fsa_dev_info *fsa_dev_ptr;
3237 fsa_dev_ptr = dev->fsa_dev;
3241 if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
3244 if (dd.cnum >= dev->maximum_num_containers)
3247 * Mark this container as being deleted.
3249 fsa_dev_ptr[dd.cnum].deleted = 1;
3251 * Mark the container as no longer valid
3253 fsa_dev_ptr[dd.cnum].valid = 0;
3257 static int delete_disk(struct aac_dev *dev, void __user *arg)
3259 struct aac_delete_disk dd;
3260 struct fsa_dev_info *fsa_dev_ptr;
3262 fsa_dev_ptr = dev->fsa_dev;
3266 if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
3269 if (dd.cnum >= dev->maximum_num_containers)
3272 * If the container is locked, it can not be deleted by the API.
3274 if (fsa_dev_ptr[dd.cnum].locked)
3278 * Mark the container as no longer being valid.
3280 fsa_dev_ptr[dd.cnum].valid = 0;
3281 fsa_dev_ptr[dd.cnum].devname[0] = '\0';
3286 int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
3289 case FSACTL_QUERY_DISK:
3290 return query_disk(dev, arg);
3291 case FSACTL_DELETE_DISK:
3292 return delete_disk(dev, arg);
3293 case FSACTL_FORCE_DELETE_DISK:
3294 return force_delete_disk(dev, arg);
3295 case FSACTL_GET_CONTAINERS:
3296 return aac_get_containers(dev);
3305 * @context: the context set in the fib - here it is scsi cmd
3306 * @fibptr: pointer to the fib
3308 * Handles the completion of a scsi command to a non dasd device
3312 static void aac_srb_callback(void *context, struct fib * fibptr)
3314 struct aac_dev *dev;
3315 struct aac_srb_reply *srbreply;
3316 struct scsi_cmnd *scsicmd;
3318 scsicmd = (struct scsi_cmnd *) context;
3320 if (!aac_valid_context(scsicmd, fibptr))
3323 BUG_ON(fibptr == NULL);
3327 srbreply = (struct aac_srb_reply *) fib_data(fibptr);
3329 scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
3331 if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
3333 srbreply->srb_status = cpu_to_le32(SRB_STATUS_SUCCESS);
3334 srbreply->scsi_status = cpu_to_le32(SAM_STAT_GOOD);
3337 * Calculate resid for sg
3339 scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
3340 - le32_to_cpu(srbreply->data_xfer_length));
3344 scsi_dma_unmap(scsicmd);
3346 /* expose physical device if expose_physicald flag is on */
3347 if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
3348 && expose_physicals > 0)
3349 aac_expose_phy_device(scsicmd);
3352 * First check the fib status
3355 if (le32_to_cpu(srbreply->status) != ST_OK) {
3358 pr_warn("aac_srb_callback: srb failed, status = %d\n",
3359 le32_to_cpu(srbreply->status));
3360 len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
3361 SCSI_SENSE_BUFFERSIZE);
3362 scsicmd->result = DID_ERROR << 16
3363 | COMMAND_COMPLETE << 8
3364 | SAM_STAT_CHECK_CONDITION;
3365 memcpy(scsicmd->sense_buffer,
3366 srbreply->sense_data, len);
3370 * Next check the srb status
3372 switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
3373 case SRB_STATUS_ERROR_RECOVERY:
3374 case SRB_STATUS_PENDING:
3375 case SRB_STATUS_SUCCESS:
3376 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3378 case SRB_STATUS_DATA_OVERRUN:
3379 switch (scsicmd->cmnd[0]) {
3388 if (le32_to_cpu(srbreply->data_xfer_length)
3389 < scsicmd->underflow)
3390 pr_warn("aacraid: SCSI CMD underflow\n");
3392 pr_warn("aacraid: SCSI CMD Data Overrun\n");
3393 scsicmd->result = DID_ERROR << 16
3394 | COMMAND_COMPLETE << 8;
3397 scsicmd->result = DID_OK << 16
3398 | COMMAND_COMPLETE << 8;
3401 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3405 case SRB_STATUS_ABORTED:
3406 scsicmd->result = DID_ABORT << 16 | ABORT << 8;
3408 case SRB_STATUS_ABORT_FAILED:
3410 * Not sure about this one - but assuming the
3411 * hba was trying to abort for some reason
3413 scsicmd->result = DID_ERROR << 16 | ABORT << 8;
3415 case SRB_STATUS_PARITY_ERROR:
3416 scsicmd->result = DID_PARITY << 16
3417 | MSG_PARITY_ERROR << 8;
3419 case SRB_STATUS_NO_DEVICE:
3420 case SRB_STATUS_INVALID_PATH_ID:
3421 case SRB_STATUS_INVALID_TARGET_ID:
3422 case SRB_STATUS_INVALID_LUN:
3423 case SRB_STATUS_SELECTION_TIMEOUT:
3424 scsicmd->result = DID_NO_CONNECT << 16
3425 | COMMAND_COMPLETE << 8;
3428 case SRB_STATUS_COMMAND_TIMEOUT:
3429 case SRB_STATUS_TIMEOUT:
3430 scsicmd->result = DID_TIME_OUT << 16
3431 | COMMAND_COMPLETE << 8;
3434 case SRB_STATUS_BUSY:
3435 scsicmd->result = DID_BUS_BUSY << 16
3436 | COMMAND_COMPLETE << 8;
3439 case SRB_STATUS_BUS_RESET:
3440 scsicmd->result = DID_RESET << 16
3441 | COMMAND_COMPLETE << 8;
3444 case SRB_STATUS_MESSAGE_REJECTED:
3445 scsicmd->result = DID_ERROR << 16
3446 | MESSAGE_REJECT << 8;
3448 case SRB_STATUS_REQUEST_FLUSHED:
3449 case SRB_STATUS_ERROR:
3450 case SRB_STATUS_INVALID_REQUEST:
3451 case SRB_STATUS_REQUEST_SENSE_FAILED:
3452 case SRB_STATUS_NO_HBA:
3453 case SRB_STATUS_UNEXPECTED_BUS_FREE:
3454 case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
3455 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
3456 case SRB_STATUS_DELAYED_RETRY:
3457 case SRB_STATUS_BAD_FUNCTION:
3458 case SRB_STATUS_NOT_STARTED:
3459 case SRB_STATUS_NOT_IN_USE:
3460 case SRB_STATUS_FORCE_ABORT:
3461 case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
3463 #ifdef AAC_DETAILED_STATUS_INFO
3464 pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n",
3465 le32_to_cpu(srbreply->srb_status) & 0x3F,
3466 aac_get_status_string(
3467 le32_to_cpu(srbreply->srb_status) & 0x3F),
3469 le32_to_cpu(srbreply->scsi_status));
3472 * When the CC bit is SET by the host in ATA pass thru CDB,
3473 * driver is supposed to return DID_OK
3475 * When the CC bit is RESET by the host, driver should
3478 if ((scsicmd->cmnd[0] == ATA_12)
3479 || (scsicmd->cmnd[0] == ATA_16)) {
3481 if (scsicmd->cmnd[2] & (0x01 << 5)) {
3482 scsicmd->result = DID_OK << 16
3483 | COMMAND_COMPLETE << 8;
3486 scsicmd->result = DID_ERROR << 16
3487 | COMMAND_COMPLETE << 8;
3491 scsicmd->result = DID_ERROR << 16
3492 | COMMAND_COMPLETE << 8;
3496 if (le32_to_cpu(srbreply->scsi_status)
3497 == SAM_STAT_CHECK_CONDITION) {
3500 scsicmd->result |= SAM_STAT_CHECK_CONDITION;
3501 len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
3502 SCSI_SENSE_BUFFERSIZE);
3503 #ifdef AAC_DETAILED_STATUS_INFO
3504 pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
3505 le32_to_cpu(srbreply->status), len);
3507 memcpy(scsicmd->sense_buffer,
3508 srbreply->sense_data, len);
3512 * OR in the scsi status (already shifted up a bit)
3514 scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
3516 aac_fib_complete(fibptr);
3517 scsicmd->scsi_done(scsicmd);
3520 static void hba_resp_task_complete(struct aac_dev *dev,
3521 struct scsi_cmnd *scsicmd,
3522 struct aac_hba_resp *err) {
3524 scsicmd->result = err->status;
3525 /* set residual count */
3526 scsi_set_resid(scsicmd, le32_to_cpu(err->residual_count));
3528 switch (err->status) {
3530 scsicmd->result |= DID_OK << 16 | COMMAND_COMPLETE << 8;
3532 case SAM_STAT_CHECK_CONDITION:
3536 len = min_t(u8, err->sense_response_data_len,
3537 SCSI_SENSE_BUFFERSIZE);
3539 memcpy(scsicmd->sense_buffer,
3540 err->sense_response_buf, len);
3541 scsicmd->result |= DID_OK << 16 | COMMAND_COMPLETE << 8;
3545 scsicmd->result |= DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
3547 case SAM_STAT_TASK_ABORTED:
3548 scsicmd->result |= DID_ABORT << 16 | ABORT << 8;
3550 case SAM_STAT_RESERVATION_CONFLICT:
3551 case SAM_STAT_TASK_SET_FULL:
3553 scsicmd->result |= DID_ERROR << 16 | COMMAND_COMPLETE << 8;
3558 static void hba_resp_task_failure(struct aac_dev *dev,
3559 struct scsi_cmnd *scsicmd,
3560 struct aac_hba_resp *err)
3562 switch (err->status) {
3563 case HBA_RESP_STAT_HBAMODE_DISABLED:
3567 bus = aac_logical_to_phys(scmd_channel(scsicmd));
3568 cid = scmd_id(scsicmd);
3569 if (dev->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) {
3570 dev->hba_map[bus][cid].devtype = AAC_DEVTYPE_ARC_RAW;
3571 dev->hba_map[bus][cid].rmw_nexus = 0xffffffff;
3573 scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
3576 case HBA_RESP_STAT_IO_ERROR:
3577 case HBA_RESP_STAT_NO_PATH_TO_DEVICE:
3578 scsicmd->result = DID_OK << 16 |
3579 COMMAND_COMPLETE << 8 | SAM_STAT_BUSY;
3581 case HBA_RESP_STAT_IO_ABORTED:
3582 scsicmd->result = DID_ABORT << 16 | ABORT << 8;
3584 case HBA_RESP_STAT_INVALID_DEVICE:
3585 scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
3587 case HBA_RESP_STAT_UNDERRUN:
3588 /* UNDERRUN is OK */
3589 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3591 case HBA_RESP_STAT_OVERRUN:
3593 scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
3601 * @context: the context set in the fib - here it is scsi cmd
3602 * @fibptr: pointer to the fib
3604 * Handles the completion of a native HBA scsi command
3607 void aac_hba_callback(void *context, struct fib *fibptr)
3609 struct aac_dev *dev;
3610 struct scsi_cmnd *scsicmd;
3612 struct aac_hba_resp *err =
3613 &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err;
3615 scsicmd = (struct scsi_cmnd *) context;
3617 if (!aac_valid_context(scsicmd, fibptr))
3620 WARN_ON(fibptr == NULL);
3623 if (!(fibptr->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF))
3624 scsi_dma_unmap(scsicmd);
3626 if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
3628 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3632 switch (err->service_response) {
3633 case HBA_RESP_SVCRES_TASK_COMPLETE:
3634 hba_resp_task_complete(dev, scsicmd, err);
3636 case HBA_RESP_SVCRES_FAILURE:
3637 hba_resp_task_failure(dev, scsicmd, err);
3639 case HBA_RESP_SVCRES_TMF_REJECTED:
3640 scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
3642 case HBA_RESP_SVCRES_TMF_LUN_INVALID:
3643 scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
3645 case HBA_RESP_SVCRES_TMF_COMPLETE:
3646 case HBA_RESP_SVCRES_TMF_SUCCEEDED:
3647 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3650 scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
3655 aac_fib_complete(fibptr);
3657 if (fibptr->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF)
3658 scsicmd->SCp.sent_command = 1;
3660 scsicmd->scsi_done(scsicmd);
3666 * @scsicmd: the scsi command block
3668 * This routine will form a FIB and fill in the aac_srb from the
3669 * scsicmd passed in.
3672 static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
3674 struct fib* cmd_fibcontext;
3675 struct aac_dev* dev;
3678 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3679 if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
3680 scsicmd->device->lun > 7) {
3681 scsicmd->result = DID_NO_CONNECT << 16;
3682 scsicmd->scsi_done(scsicmd);
3687 * Allocate and initialize a Fib then setup a BlockWrite command
3689 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
3691 status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
3694 * Check that the command queued to the controller
3696 if (status == -EINPROGRESS) {
3697 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
3701 printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
3702 aac_fib_complete(cmd_fibcontext);
3703 aac_fib_free(cmd_fibcontext);
3711 * @scsicmd: the scsi command block
3713 * This routine will form a FIB and fill in the aac_hba_cmd_req from the
3714 * scsicmd passed in.
3716 static int aac_send_hba_fib(struct scsi_cmnd *scsicmd)
3718 struct fib *cmd_fibcontext;
3719 struct aac_dev *dev;
3722 dev = shost_priv(scsicmd->device->host);
3723 if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
3724 scsicmd->device->lun > AAC_MAX_LUN - 1) {
3725 scsicmd->result = DID_NO_CONNECT << 16;
3726 scsicmd->scsi_done(scsicmd);
3731 * Allocate and initialize a Fib then setup a BlockWrite command
3733 cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
3734 if (!cmd_fibcontext)
3737 status = aac_adapter_hba(cmd_fibcontext, scsicmd);
3740 * Check that the command queued to the controller
3742 if (status == -EINPROGRESS) {
3743 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
3747 pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",
3749 aac_fib_complete(cmd_fibcontext);
3750 aac_fib_free(cmd_fibcontext);
3756 static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg)
3758 struct aac_dev *dev;
3759 unsigned long byte_count = 0;
3762 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3763 // Get rid of old data
3765 psg->sg[0].addr = 0;
3766 psg->sg[0].count = 0;
3768 nseg = scsi_dma_map(scsicmd);
3772 struct scatterlist *sg;
3775 psg->count = cpu_to_le32(nseg);
3777 scsi_for_each_sg(scsicmd, sg, nseg, i) {
3778 psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
3779 psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
3780 byte_count += sg_dma_len(sg);
3782 /* hba wants the size to be exact */
3783 if (byte_count > scsi_bufflen(scsicmd)) {
3784 u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3785 (byte_count - scsi_bufflen(scsicmd));
3786 psg->sg[i-1].count = cpu_to_le32(temp);
3787 byte_count = scsi_bufflen(scsicmd);
3789 /* Check for command underflow */
3790 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3791 printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3792 byte_count, scsicmd->underflow);
3799 static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg)
3801 struct aac_dev *dev;
3802 unsigned long byte_count = 0;
3806 dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3807 // Get rid of old data
3809 psg->sg[0].addr[0] = 0;
3810 psg->sg[0].addr[1] = 0;
3811 psg->sg[0].count = 0;
3813 nseg = scsi_dma_map(scsicmd);
3817 struct scatterlist *sg;
3820 scsi_for_each_sg(scsicmd, sg, nseg, i) {
3821 int count = sg_dma_len(sg);
3822 addr = sg_dma_address(sg);
3823 psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
3824 psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
3825 psg->sg[i].count = cpu_to_le32(count);
3826 byte_count += count;
3828 psg->count = cpu_to_le32(nseg);
3829 /* hba wants the size to be exact */
3830 if (byte_count > scsi_bufflen(scsicmd)) {
3831 u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3832 (byte_count - scsi_bufflen(scsicmd));
3833 psg->sg[i-1].count = cpu_to_le32(temp);
3834 byte_count = scsi_bufflen(scsicmd);
3836 /* Check for command underflow */
3837 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3838 printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3839 byte_count, scsicmd->underflow);
3845 static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg)
3847 unsigned long byte_count = 0;
3850 // Get rid of old data
3852 psg->sg[0].next = 0;
3853 psg->sg[0].prev = 0;
3854 psg->sg[0].addr[0] = 0;
3855 psg->sg[0].addr[1] = 0;
3856 psg->sg[0].count = 0;
3857 psg->sg[0].flags = 0;
3859 nseg = scsi_dma_map(scsicmd);
3863 struct scatterlist *sg;
3866 scsi_for_each_sg(scsicmd, sg, nseg, i) {
3867 int count = sg_dma_len(sg);
3868 u64 addr = sg_dma_address(sg);
3869 psg->sg[i].next = 0;
3870 psg->sg[i].prev = 0;
3871 psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
3872 psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
3873 psg->sg[i].count = cpu_to_le32(count);
3874 psg->sg[i].flags = 0;
3875 byte_count += count;
3877 psg->count = cpu_to_le32(nseg);
3878 /* hba wants the size to be exact */
3879 if (byte_count > scsi_bufflen(scsicmd)) {
3880 u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3881 (byte_count - scsi_bufflen(scsicmd));
3882 psg->sg[i-1].count = cpu_to_le32(temp);
3883 byte_count = scsi_bufflen(scsicmd);
3885 /* Check for command underflow */
3886 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3887 printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3888 byte_count, scsicmd->underflow);
3894 static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
3895 struct aac_raw_io2 *rio2, int sg_max)
3897 unsigned long byte_count = 0;
3900 nseg = scsi_dma_map(scsicmd);
3904 struct scatterlist *sg;
3905 int i, conformable = 0;
3906 u32 min_size = PAGE_SIZE, cur_size;
3908 scsi_for_each_sg(scsicmd, sg, nseg, i) {
3909 int count = sg_dma_len(sg);
3910 u64 addr = sg_dma_address(sg);
3912 BUG_ON(i >= sg_max);
3913 rio2->sge[i].addrHigh = cpu_to_le32((u32)(addr>>32));
3914 rio2->sge[i].addrLow = cpu_to_le32((u32)(addr & 0xffffffff));
3915 cur_size = cpu_to_le32(count);
3916 rio2->sge[i].length = cur_size;
3917 rio2->sge[i].flags = 0;
3920 rio2->sgeFirstSize = cur_size;
3921 } else if (i == 1) {
3922 rio2->sgeNominalSize = cur_size;
3923 min_size = cur_size;
3924 } else if ((i+1) < nseg && cur_size != rio2->sgeNominalSize) {
3926 if (cur_size < min_size)
3927 min_size = cur_size;
3929 byte_count += count;
3932 /* hba wants the size to be exact */
3933 if (byte_count > scsi_bufflen(scsicmd)) {
3934 u32 temp = le32_to_cpu(rio2->sge[i-1].length) -
3935 (byte_count - scsi_bufflen(scsicmd));
3936 rio2->sge[i-1].length = cpu_to_le32(temp);
3937 byte_count = scsi_bufflen(scsicmd);
3940 rio2->sgeCnt = cpu_to_le32(nseg);
3941 rio2->flags |= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212);
3942 /* not conformable: evaluate required sg elements */
3944 int j, nseg_new = nseg, err_found;
3945 for (i = min_size / PAGE_SIZE; i >= 1; --i) {
3948 for (j = 1; j < nseg - 1; ++j) {
3949 if (rio2->sge[j].length % (i*PAGE_SIZE)) {
3953 nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
3958 if (i > 0 && nseg_new <= sg_max)
3959 aac_convert_sgraw2(rio2, i, nseg, nseg_new);
3961 rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
3963 /* Check for command underflow */
3964 if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
3965 printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3966 byte_count, scsicmd->underflow);
3973 static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, int pages, int nseg, int nseg_new)
3975 struct sge_ieee1212 *sge;
3979 if (aac_convert_sgl == 0)
3982 sge = kmalloc(nseg_new * sizeof(struct sge_ieee1212), GFP_ATOMIC);
3986 for (i = 1, pos = 1; i < nseg-1; ++i) {
3987 for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) {
3988 addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE;
3989 sge[pos].addrLow = addr_low;
3990 sge[pos].addrHigh = rio2->sge[i].addrHigh;
3991 if (addr_low < rio2->sge[i].addrLow)
3992 sge[pos].addrHigh++;
3993 sge[pos].length = pages * PAGE_SIZE;
3998 sge[pos] = rio2->sge[nseg-1];
3999 memcpy(&rio2->sge[1], &sge[1], (nseg_new-1)*sizeof(struct sge_ieee1212));
4002 rio2->sgeCnt = cpu_to_le32(nseg_new);
4003 rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
4004 rio2->sgeNominalSize = pages * PAGE_SIZE;
4008 static long aac_build_sghba(struct scsi_cmnd *scsicmd,
4009 struct aac_hba_cmd_req *hbacmd,
4013 unsigned long byte_count = 0;
4015 struct scatterlist *sg;
4018 struct aac_hba_sgl *sge;
4020 nseg = scsi_dma_map(scsicmd);
4026 if (nseg > HBA_MAX_SG_EMBEDDED)
4027 sge = &hbacmd->sge[2];
4029 sge = &hbacmd->sge[0];
4031 scsi_for_each_sg(scsicmd, sg, nseg, i) {
4032 int count = sg_dma_len(sg);
4033 u64 addr = sg_dma_address(sg);
4035 WARN_ON(i >= sg_max);
4036 sge->addr_hi = cpu_to_le32((u32)(addr>>32));
4037 sge->addr_lo = cpu_to_le32((u32)(addr & 0xffffffff));
4038 cur_size = cpu_to_le32(count);
4039 sge->len = cur_size;
4041 byte_count += count;
4046 /* hba wants the size to be exact */
4047 if (byte_count > scsi_bufflen(scsicmd)) {
4050 temp = le32_to_cpu(sge->len) - byte_count
4051 - scsi_bufflen(scsicmd);
4052 sge->len = cpu_to_le32(temp);
4053 byte_count = scsi_bufflen(scsicmd);
4056 if (nseg <= HBA_MAX_SG_EMBEDDED) {
4057 hbacmd->emb_data_desc_count = cpu_to_le32(nseg);
4058 sge->flags = cpu_to_le32(0x40000000);
4061 hbacmd->sge[0].flags = cpu_to_le32(0x80000000);
4062 hbacmd->emb_data_desc_count = (u8)cpu_to_le32(1);
4063 hbacmd->sge[0].addr_hi = (u32)cpu_to_le32(sg_address >> 32);
4064 hbacmd->sge[0].addr_lo =
4065 cpu_to_le32((u32)(sg_address & 0xffffffff));
4068 /* Check for command underflow */
4069 if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
4070 pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",
4071 byte_count, scsicmd->underflow);
4077 #ifdef AAC_DETAILED_STATUS_INFO
4079 struct aac_srb_status_info {
4085 static struct aac_srb_status_info srb_status_info[] = {
4086 { SRB_STATUS_PENDING, "Pending Status"},
4087 { SRB_STATUS_SUCCESS, "Success"},
4088 { SRB_STATUS_ABORTED, "Aborted Command"},
4089 { SRB_STATUS_ABORT_FAILED, "Abort Failed"},
4090 { SRB_STATUS_ERROR, "Error Event"},
4091 { SRB_STATUS_BUSY, "Device Busy"},
4092 { SRB_STATUS_INVALID_REQUEST, "Invalid Request"},
4093 { SRB_STATUS_INVALID_PATH_ID, "Invalid Path ID"},
4094 { SRB_STATUS_NO_DEVICE, "No Device"},
4095 { SRB_STATUS_TIMEOUT, "Timeout"},
4096 { SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
4097 { SRB_STATUS_COMMAND_TIMEOUT, "Command Timeout"},
4098 { SRB_STATUS_MESSAGE_REJECTED, "Message Rejected"},
4099 { SRB_STATUS_BUS_RESET, "Bus Reset"},
4100 { SRB_STATUS_PARITY_ERROR, "Parity Error"},
4101 { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
4102 { SRB_STATUS_NO_HBA, "No HBA"},
4103 { SRB_STATUS_DATA_OVERRUN, "Data Overrun/Data Underrun"},
4104 { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
4105 { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
4106 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
4107 { SRB_STATUS_REQUEST_FLUSHED, "Request Flushed"},
4108 { SRB_STATUS_DELAYED_RETRY, "Delayed Retry"},
4109 { SRB_STATUS_INVALID_LUN, "Invalid LUN"},
4110 { SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
4111 { SRB_STATUS_BAD_FUNCTION, "Bad Function"},
4112 { SRB_STATUS_ERROR_RECOVERY, "Error Recovery"},
4113 { SRB_STATUS_NOT_STARTED, "Not Started"},
4114 { SRB_STATUS_NOT_IN_USE, "Not In Use"},
4115 { SRB_STATUS_FORCE_ABORT, "Force Abort"},
4116 { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
4117 { 0xff, "Unknown Error"}
4120 char *aac_get_status_string(u32 status)
4124 for (i = 0; i < ARRAY_SIZE(srb_status_info); i++)
4125 if (srb_status_info[i].status == status)
4126 return srb_status_info[i].str;
4128 return "Bad Status Code";