2 * Initio A100 device driver for Linux.
4 * Copyright (c) 1994-1998 Initio Corporation
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; see the file COPYING. If not, write to
19 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
25 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * 06/18/98 HL, Initial production Version 1.02
35 * 12/19/98 bv, Use spinlocks for 2.1.95 and up
36 * 06/25/02 Doug Ledford <dledford@redhat.com>
37 * - This and the i60uscsi.h file are almost identical,
38 * merged them into a single header used by both .c files.
39 * 14/06/07 Alan Cox <alan@redhat.com>
40 * - Grand cleanup and Linuxisation
43 #define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
46 #define ORC_MAXQUEUE 245
47 #define ORC_MAXTAGS 64
49 #define ORC_MAXQUEUE 25
53 #define TOTAL_SG_ENTRY 32
54 #define MAX_TARGETS 16
58 /************************************************************************/
59 /* Scatter-Gather Element Structure */
60 /************************************************************************/
62 u32 base; /* Data Pointer */
63 u32 length; /* Data Length */
66 /* SCSI related definition */
67 #define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */
68 #define DISC_ALLOW 0xC0 /* Disconnect is allowed */
71 #define ORC_OFFSET_SCB 16
72 #define ORC_MAX_SCBS 250
73 #define MAX_CHANNELS 2
74 #define MAX_ESCB_ELE 64
75 #define TCF_DRV_255_63 0x0400
77 /********************************************************/
78 /* Orchid Host Command Set */
79 /********************************************************/
80 #define ORC_CMD_NOP 0x00 /* Host command - NOP */
81 #define ORC_CMD_VERSION 0x01 /* Host command - Get F/W version */
82 #define ORC_CMD_ECHO 0x02 /* Host command - ECHO */
83 #define ORC_CMD_SET_NVM 0x03 /* Host command - Set NVRAM */
84 #define ORC_CMD_GET_NVM 0x04 /* Host command - Get NVRAM */
85 #define ORC_CMD_GET_BUS_STATUS 0x05 /* Host command - Get SCSI bus status */
86 #define ORC_CMD_ABORT_SCB 0x06 /* Host command - Abort SCB */
87 #define ORC_CMD_ISSUE_SCB 0x07 /* Host command - Issue SCB */
89 /********************************************************/
90 /* Orchid Register Set */
91 /********************************************************/
92 #define ORC_GINTS 0xA0 /* Global Interrupt Status */
93 #define QINT 0x04 /* Reply Queue Interrupt */
94 #define ORC_GIMSK 0xA1 /* Global Interrupt MASK */
95 #define MQINT 0x04 /* Mask Reply Queue Interrupt */
96 #define ORC_GCFG 0xA2 /* Global Configure */
97 #define EEPRG 0x01 /* Enable EEPROM programming */
98 #define ORC_GSTAT 0xA3 /* Global status */
99 #define WIDEBUS 0x10 /* Wide SCSI Devices connected */
100 #define ORC_HDATA 0xA4 /* Host Data */
101 #define ORC_HCTRL 0xA5 /* Host Control */
102 #define SCSIRST 0x80 /* SCSI bus reset */
103 #define HDO 0x40 /* Host data out */
104 #define HOSTSTOP 0x02 /* Host stop RISC engine */
105 #define DEVRST 0x01 /* Device reset */
106 #define ORC_HSTUS 0xA6 /* Host Status */
107 #define HDI 0x02 /* Host data in */
108 #define RREADY 0x01 /* RISC engine is ready to receive */
109 #define ORC_NVRAM 0xA7 /* Nvram port address */
114 #define ORC_PQUEUE 0xA8 /* Posting queue FIFO */
115 #define ORC_PQCNT 0xA9 /* Posting queue FIFO Cnt */
116 #define ORC_RQUEUE 0xAA /* Reply queue FIFO */
117 #define ORC_RQUEUECNT 0xAB /* Reply queue FIFO Cnt */
118 #define ORC_FWBASEADR 0xAC /* Firmware base address */
120 #define ORC_EBIOSADR0 0xB0 /* External Bios address */
121 #define ORC_EBIOSADR1 0xB1 /* External Bios address */
122 #define ORC_EBIOSADR2 0xB2 /* External Bios address */
123 #define ORC_EBIOSDATA 0xB3 /* External Bios address */
125 #define ORC_SCBSIZE 0xB7 /* SCB size register */
126 #define ORC_SCBBASE0 0xB8 /* SCB base address 0 */
127 #define ORC_SCBBASE1 0xBC /* SCB base address 1 */
129 #define ORC_RISCCTL 0xE0 /* RISC Control */
130 #define PRGMRST 0x002
131 #define DOWNLOAD 0x001
132 #define ORC_PRGMCTR0 0xE2 /* RISC program counter */
133 #define ORC_PRGMCTR1 0xE3 /* RISC program counter */
134 #define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */
136 struct orc_extended_scb { /* Extended SCB */
137 struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */
138 struct scsi_cmnd *srb; /*50 SRB Pointer */
141 /***********************************************************************
144 0x40 bytes long, the last 8 are user bytes
145 ************************************************************************/
146 struct orc_scb { /* Scsi_Ctrl_Blk */
147 u8 opcode; /*00 SCB command code&residual */
148 u8 flags; /*01 SCB Flags */
149 u8 target; /*02 Target Id */
151 u32 reserved0; /*04 Reserved for ORCHID must 0 */
152 u32 xferlen; /*08 Data Transfer Length */
153 u32 reserved1; /*0C Reserved for ORCHID must 0 */
154 u32 sg_len; /*10 SG list # * 8 */
155 u32 sg_addr; /*14 SG List Buf physical Addr */
156 u32 sg_addrhigh; /*18 SG Buffer high physical Addr */
157 u8 hastat; /*1C Host Status */
158 u8 tastat; /*1D Target Status */
159 u8 status; /*1E SCB status */
160 u8 link; /*1F Link pointer, default 0xFF */
161 u8 sense_len; /*20 Sense Allocation Length */
162 u8 cdb_len; /*21 CDB Length */
163 u8 ident; /*22 Identify */
164 u8 tag_msg; /*23 Tag Message */
165 u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */
166 u8 scbidx; /*3C Index for this ORCSCB */
167 u32 sense_addr; /*34 Sense Buffer physical Addr */
169 struct orc_extended_scb *escb; /*38 Extended SCB Pointer */
170 /* 64bit pointer or 32bit pointer + reserved ? */
172 u8 reserved2[4]; /*3E Reserved for Driver use */
176 /* Opcodes of ORCSCB_Opcode */
177 #define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */
178 #define ORC_BUSDEVRST 0x01 /* SCSI Bus Device Reset */
180 /* Status of ORCSCB_Status */
181 #define ORCSCB_COMPLETE 0x00 /* SCB request completed */
182 #define ORCSCB_POST 0x01 /* SCB is posted by the HOST */
184 /* Bit Definition for ORCSCB_Flags */
185 #define SCF_DISINT 0x01 /* Disable HOST interrupt */
186 #define SCF_DIR 0x18 /* Direction bits */
187 #define SCF_NO_DCHK 0x00 /* Direction determined by SCSI */
188 #define SCF_DIN 0x08 /* From Target to Initiator */
189 #define SCF_DOUT 0x10 /* From Initiator to Target */
190 #define SCF_NO_XF 0x18 /* No data transfer */
191 #define SCF_POLL 0x40
193 /* Error Codes for ORCSCB_HaStat */
194 #define HOST_SEL_TOUT 0x11
195 #define HOST_DO_DU 0x12
196 #define HOST_BUS_FREE 0x13
197 #define HOST_BAD_PHAS 0x14
198 #define HOST_INV_CMD 0x16
199 #define HOST_SCSI_RST 0x1B
200 #define HOST_DEV_RST 0x1C
203 /* Error Codes for ORCSCB_TaStat */
204 #define TARGET_CHK_COND 0x02
205 #define TARGET_BUSY 0x08
206 #define TARGET_TAG_FULL 0x28
209 /***********************************************************************
210 Target Device Control Structure
211 **********************************************************************/
214 u8 TCS_DrvDASD; /* 6 */
215 u8 TCS_DrvSCSI; /* 7 */
216 u8 TCS_DrvHead; /* 8 */
217 u16 TCS_DrvFlags; /* 4 */
218 u8 TCS_DrvSector; /* 7 */
221 /* Bit Definition for TCF_DrvFlags */
222 #define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */
223 #define TCS_DF_NOSCSI_SUPT 0x40 /* Suppress OS/2 SCSI Mgr support */
226 /***********************************************************************
227 Host Adapter Control Structure
228 ************************************************************************/
230 unsigned long base; /* Base address */
231 u8 index; /* Index (Channel)*/
232 u8 scsi_id; /* H/A SCSI ID */
233 u8 BIOScfg; /*BIOS configuration */
235 u8 max_targets; /* SCSI0MAXTags */
236 struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */
237 dma_addr_t scb_phys; /* Scb Physical address */
238 struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */
239 dma_addr_t escb_phys; /* scatter list Physical address */
240 u8 target_flag[16]; /* target configuration, TCF_EN_TAG */
241 u8 max_tags[16]; /* ORC_MAX_SCBS */
242 u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */
243 spinlock_t allocation_lock;
244 struct pci_dev *pdev;
247 /* Bit Definition for HCS_Flags */
249 #define HCF_SCSI_RESET 0x01 /* SCSI BUS RESET */
250 #define HCF_PARITY 0x02 /* parity card */
251 #define HCF_LVDS 0x10 /* parity card */
253 /* Bit Definition for TargetFlag */
255 #define TCF_EN_255 0x08
256 #define TCF_EN_TAG 0x10
257 #define TCF_BUSY 0x20
258 #define TCF_DISCONNECT 0x40
259 #define TCF_SPIN_UP 0x80
261 /* Bit Definition for HCS_AFlags */
262 #define HCS_AF_IGNORE 0x01 /* Adapter ignore */
263 #define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */
264 #define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */
267 /*----------header ---------------*/
268 u8 SubVendorID0; /* 00 - Sub Vendor ID */
269 u8 SubVendorID1; /* 00 - Sub Vendor ID */
270 u8 SubSysID0; /* 02 - Sub System ID */
271 u8 SubSysID1; /* 02 - Sub System ID */
272 u8 SubClass; /* 04 - Sub Class */
273 u8 VendorID0; /* 05 - Vendor ID */
274 u8 VendorID1; /* 05 - Vendor ID */
275 u8 DeviceID0; /* 07 - Device ID */
276 u8 DeviceID1; /* 07 - Device ID */
277 u8 Reserved0[2]; /* 09 - Reserved */
278 u8 revision; /* 0B - revision of data structure */
279 /* ----Host Adapter Structure ---- */
280 u8 NumOfCh; /* 0C - Number of SCSI channel */
281 u8 BIOSConfig1; /* 0D - BIOS configuration 1 */
282 u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */
283 u8 BIOSConfig3; /* 0F - BIOS configuration 3 */
284 /* ----SCSI channel Structure ---- */
285 /* from "CTRL-I SCSI Host Adapter SetUp menu " */
286 u8 scsi_id; /* 10 - Channel 0 SCSI ID */
287 u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */
288 u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */
289 u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */
290 u8 ReservedforChannel0[2]; /* 14 - Reserved */
292 /* ----SCSI target Structure ---- */
293 /* from "CTRL-I SCSI device SetUp menu " */
294 u8 Target00Config; /* 16 - Channel 0 Target 0 config */
295 u8 Target01Config; /* 17 - Channel 0 Target 1 config */
296 u8 Target02Config; /* 18 - Channel 0 Target 2 config */
297 u8 Target03Config; /* 19 - Channel 0 Target 3 config */
298 u8 Target04Config; /* 1A - Channel 0 Target 4 config */
299 u8 Target05Config; /* 1B - Channel 0 Target 5 config */
300 u8 Target06Config; /* 1C - Channel 0 Target 6 config */
301 u8 Target07Config; /* 1D - Channel 0 Target 7 config */
302 u8 Target08Config; /* 1E - Channel 0 Target 8 config */
303 u8 Target09Config; /* 1F - Channel 0 Target 9 config */
304 u8 Target0AConfig; /* 20 - Channel 0 Target A config */
305 u8 Target0BConfig; /* 21 - Channel 0 Target B config */
306 u8 Target0CConfig; /* 22 - Channel 0 Target C config */
307 u8 Target0DConfig; /* 23 - Channel 0 Target D config */
308 u8 Target0EConfig; /* 24 - Channel 0 Target E config */
309 u8 Target0FConfig; /* 25 - Channel 0 Target F config */
311 u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */
312 u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */
313 u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */
314 u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */
315 u8 ReservedforChannel1[2]; /* 2A - Reserved */
317 /* ----SCSI target Structure ---- */
318 /* from "CTRL-I SCSI device SetUp menu " */
319 u8 Target10Config; /* 2C - Channel 1 Target 0 config */
320 u8 Target11Config; /* 2D - Channel 1 Target 1 config */
321 u8 Target12Config; /* 2E - Channel 1 Target 2 config */
322 u8 Target13Config; /* 2F - Channel 1 Target 3 config */
323 u8 Target14Config; /* 30 - Channel 1 Target 4 config */
324 u8 Target15Config; /* 31 - Channel 1 Target 5 config */
325 u8 Target16Config; /* 32 - Channel 1 Target 6 config */
326 u8 Target17Config; /* 33 - Channel 1 Target 7 config */
327 u8 Target18Config; /* 34 - Channel 1 Target 8 config */
328 u8 Target19Config; /* 35 - Channel 1 Target 9 config */
329 u8 Target1AConfig; /* 36 - Channel 1 Target A config */
330 u8 Target1BConfig; /* 37 - Channel 1 Target B config */
331 u8 Target1CConfig; /* 38 - Channel 1 Target C config */
332 u8 Target1DConfig; /* 39 - Channel 1 Target D config */
333 u8 Target1EConfig; /* 3A - Channel 1 Target E config */
334 u8 Target1FConfig; /* 3B - Channel 1 Target F config */
335 u8 reserved[3]; /* 3C - Reserved */
336 /* ---------- CheckSum ---------- */
337 u8 CheckSum; /* 3F - Checksum of NVRam */
340 /* Bios Configuration for nvram->BIOSConfig1 */
341 #define NBC_BIOSENABLE 0x01 /* BIOS enable */
342 #define NBC_CDROM 0x02 /* Support bootable CDROM */
343 #define NBC_REMOVABLE 0x04 /* Support removable drive */
345 /* Bios Configuration for nvram->BIOSConfig2 */
346 #define NBB_TARGET_MASK 0x0F /* Boot SCSI target ID number */
347 #define NBB_CHANL_MASK 0xF0 /* Boot SCSI channel number */
349 /* Bit definition for nvram->SCSIConfig */
350 #define NCC_BUSRESET 0x01 /* Reset SCSI bus at power up */
351 #define NCC_PARITYCHK 0x02 /* SCSI parity enable */
352 #define NCC_LVDS 0x10 /* Enable LVDS */
353 #define NCC_ACTTERM1 0x20 /* Enable active terminator 1 */
354 #define NCC_ACTTERM2 0x40 /* Enable active terminator 2 */
355 #define NCC_AUTOTERM 0x80 /* Enable auto termination */
357 /* Bit definition for nvram->TargetxConfig */
358 #define NTC_PERIOD 0x07 /* Maximum Sync. Speed */
359 #define NTC_1GIGA 0x08 /* 255 head / 63 sectors (64/32) */
360 #define NTC_NO_SYNC 0x10 /* NO SYNC. NEGO */
361 #define NTC_NO_WIDESYNC 0x20 /* NO WIDE SYNC. NEGO */
362 #define NTC_DISC_ENABLE 0x40 /* Enable SCSI disconnect */
363 #define NTC_SPINUP 0x80 /* Start disk drive */
365 /* Default NVRam values */
366 #define NBC_DEFAULT (NBC_ENABLE)
367 #define NCC_DEFAULT (NCC_BUSRESET | NCC_AUTOTERM | NCC_PARITYCHK)
368 #define NCC_MAX_TAGS 0x20 /* Maximum tags per target */
369 #define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */
370 #define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE)