1 menu "SCSI device support"
5 default y if SCSI=n || SCSI=y
9 tristate "RAID Transport Class"
17 tristate "SCSI device support"
19 select SCSI_DMA if HAS_DMA
21 select BLK_SCSI_REQUEST
23 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
24 any other SCSI device under Linux, say Y and make sure that you know
25 the name of your SCSI host adapter (the card inside your computer
26 that "speaks" the SCSI protocol, also called SCSI controller),
27 because you will be asked for it.
29 You also need to say Y here if you have a device which speaks
30 the SCSI protocol. Examples of this include the parallel port
31 version of the IOMEGA ZIP drive, USB storage devices, Fibre
32 Channel, and FireWire storage.
34 To compile this driver as a module, choose M here and read
35 <file:Documentation/scsi/scsi.txt>.
36 The module will be called scsi_mod.
38 However, do not compile this as a module if your root file system
39 (the one containing the directory /) is located on a SCSI device.
54 bool "legacy /proc/scsi/ support"
55 depends on SCSI && PROC_FS
58 This option enables support for the various files in
59 /proc/scsi. In Linux 2.6 this has been superseded by
60 files in sysfs but many legacy applications rely on this.
64 comment "SCSI support type (disk, tape, CD-ROM)"
68 tristate "SCSI disk support"
71 If you want to use SCSI hard disks, Fibre Channel disks,
72 Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
73 USB storage or the SCSI or parallel port version of
74 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
75 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
76 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
79 To compile this driver as a module, choose M here and read
80 <file:Documentation/scsi/scsi.txt>.
81 The module will be called sd_mod.
83 Do not compile this driver as a module if your root file system
84 (the one containing the directory /) is located on a SCSI disk.
85 In this case, do not compile the driver for your SCSI host adapter
86 (below) as a module either.
89 tristate "SCSI tape support"
92 If you want to use a SCSI tape drive under Linux, say Y and read the
93 SCSI-HOWTO, available from
94 <http://www.tldp.org/docs.html#howto>, and
95 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
98 To compile this driver as a module, choose M here and read
99 <file:Documentation/scsi/scsi.txt>. The module will be called st.
102 tristate "SCSI OnStream SC-x0 tape support"
105 The OnStream SC-x0 SCSI tape drives cannot be driven by the
106 standard st driver, but instead need this special osst driver and
107 use the /dev/osstX char device nodes (major 206). Via usb-storage,
108 you may be able to drive the USB-x0 and DI-x0 drives as well.
109 Note that there is also a second generation of OnStream
110 tape drives (ADR-x0) that supports the standard SCSI-2 commands for
111 tapes (QIC-157) and can be driven by the standard driver st.
112 For more information, you may have a look at the SCSI-HOWTO
113 <http://www.tldp.org/docs.html#howto> and
114 <file:Documentation/scsi/osst.txt> in the kernel source.
115 More info on the OnStream driver may be found on
116 <http://sourceforge.net/projects/osst/>
117 Please also have a look at the standard st docu, as most of it
118 applies to osst as well.
120 To compile this driver as a module, choose M here and read
121 <file:Documentation/scsi/scsi.txt>. The module will be called osst.
124 tristate "SCSI CDROM support"
125 depends on SCSI && BLK_DEV
128 If you want to use a CD or DVD drive attached to your computer
129 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
130 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
132 Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
134 To compile this driver as a module, choose M here and read
135 <file:Documentation/scsi/scsi.txt>.
136 The module will be called sr_mod.
138 config BLK_DEV_SR_VENDOR
139 bool "Enable vendor-specific extensions (for SCSI CDROM)"
140 depends on BLK_DEV_SR
142 This enables the usage of vendor specific SCSI commands. This is
143 required to support multisession CDs with old NEC/TOSHIBA cdrom
144 drives (and HP Writers). If you have such a drive and get the first
145 session only, try saying Y here; everybody else says N.
148 tristate "SCSI generic support"
151 If you want to use SCSI scanners, synthesizers or CD-writers or just
152 about anything having "SCSI" in its name other than hard disks,
153 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
154 directly, so you need some additional software which knows how to
155 talk to these devices using the SCSI protocol:
157 For scanners, look at SANE (<http://www.sane-project.org/>). For CD
158 writer software look at Cdrtools
159 (<http://cdrecord.berlios.de/private/cdrecord.html>)
160 and for burning a "disk at once": CDRDAO
161 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
162 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
163 For other devices, it's possible that you'll have to write the
164 driver software yourself. Please read the file
165 <file:Documentation/scsi/scsi-generic.txt> for more information.
167 To compile this driver as a module, choose M here and read
168 <file:Documentation/scsi/scsi.txt>. The module will be called sg.
173 tristate "SCSI media changer support"
176 This is a driver for SCSI media changers. Most common devices are
177 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
178 don't need this for those tiny 6-slot cdrom changers. Media
179 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
180 If you have such hardware and want to use it with linux, say Y
181 here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
183 If you want to compile this as a module ( = code which can be
184 inserted in and removed from the running kernel whenever you want),
185 say M here and read <file:Documentation/kbuild/modules.txt> and
186 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
189 config SCSI_ENCLOSURE
190 tristate "SCSI Enclosure Support"
191 depends on SCSI && ENCLOSURE_SERVICES
192 depends on m || SCSI_SAS_ATTRS != m
194 Enclosures are devices sitting on or in SCSI backplanes that
195 manage devices. If you have a disk cage, the chances are that
196 it has an enclosure device. Selecting this option will just allow
197 certain enclosure conditions to be reported and is not required.
199 config SCSI_CONSTANTS
200 bool "Verbose SCSI error reporting (kernel size += 36K)"
203 The error messages regarding your SCSI hardware will be easier to
204 understand if you say Y here; it will enlarge your kernel by about
205 36 KB. If in doubt, say Y.
208 bool "SCSI logging facility"
211 This turns on a logging facility that can be used to debug a number
212 of SCSI related problems.
214 If you say Y here, no logging output will appear by default, but you
215 can enable logging by saying Y to "/proc file system support" and
216 "Sysctl support" below and executing the command
218 echo <bitmask> > /proc/sys/dev/scsi/logging_level
220 where <bitmask> is a four byte value representing the logging type
221 and logging level for each type of logging selected.
223 There are a number of logging types and you can find them in the
224 source at <file:drivers/scsi/scsi_logging.h>. The logging levels
225 are also described in that file and they determine the verbosity of
226 the logging for each logging type.
228 If you say N here, it may be harder to track down some types of SCSI
229 problems. If you say Y here your kernel will be somewhat larger, but
230 there should be no noticeable performance impact as long as you have
233 config SCSI_SCAN_ASYNC
234 bool "Asynchronous SCSI scanning"
237 The SCSI subsystem can probe for devices while the rest of the
238 system continues booting, and even probe devices on different
239 busses in parallel, leading to a significant speed-up.
241 You can override this choice by specifying "scsi_mod.scan=sync"
242 or async on the kernel's command line.
244 Note that this setting also affects whether resuming from
245 system suspend will be performed asynchronously.
247 menu "SCSI Transports"
250 config SCSI_SPI_ATTRS
251 tristate "Parallel SCSI (SPI) Transport Attributes"
254 If you wish to export transport-specific information about
255 each attached SCSI device to sysfs, say Y. Otherwise, say N.
258 tristate "FiberChannel Transport Attributes"
259 depends on SCSI && NET
260 select BLK_DEV_BSGLIB
263 If you wish to export transport-specific information about
264 each attached FiberChannel device to sysfs, say Y.
267 config SCSI_ISCSI_ATTRS
268 tristate "iSCSI Transport Attributes"
269 depends on SCSI && NET
270 select BLK_DEV_BSGLIB
272 If you wish to export transport-specific information about
273 each attached iSCSI device to sysfs, say Y.
276 config SCSI_SAS_ATTRS
277 tristate "SAS Transport Attributes"
279 select BLK_DEV_BSGLIB
281 If you wish to export transport-specific information about
282 each attached SAS device to sysfs, say Y.
284 source "drivers/scsi/libsas/Kconfig"
286 config SCSI_SRP_ATTRS
287 tristate "SRP Transport Attributes"
290 If you wish to export transport-specific information about
291 each attached SRP device to sysfs, say Y.
295 menuconfig SCSI_LOWLEVEL
296 bool "SCSI low-level drivers"
300 if SCSI_LOWLEVEL && SCSI
303 tristate "iSCSI Initiator over TCP/IP"
304 depends on SCSI && INET
308 select SCSI_ISCSI_ATTRS
310 The iSCSI Driver provides a host with the ability to access storage
311 through an IP network. The driver uses the iSCSI protocol to transport
312 SCSI requests and responses over a TCP/IP network between the host
313 (the "initiator") and "targets". Architecturally, the iSCSI driver
314 combines with the host's TCP/IP stack, network drivers, and Network
315 Interface Card (NIC) to provide the same functions as a SCSI or a
316 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
318 To compile this driver as a module, choose M here: the
319 module will be called iscsi_tcp.
321 The userspace component needed to initialize the driver, documentation,
322 and sample configuration files can be found here:
324 http://open-iscsi.org
326 config ISCSI_BOOT_SYSFS
327 tristate "iSCSI Boot Sysfs Interface"
330 This option enables support for exposing iSCSI boot information
331 via sysfs to userspace. If you wish to export this information,
332 say Y. Otherwise, say N.
334 source "drivers/scsi/cxgbi/Kconfig"
335 source "drivers/scsi/bnx2i/Kconfig"
336 source "drivers/scsi/bnx2fc/Kconfig"
337 source "drivers/scsi/be2iscsi/Kconfig"
338 source "drivers/scsi/cxlflash/Kconfig"
341 tristate "SGI WD93C93 SCSI Driver"
342 depends on SGI_HAS_WD93 && SCSI
344 If you have a Western Digital WD93 SCSI controller on
345 an SGI MIPS system, say Y. Otherwise, say N.
347 config BLK_DEV_3W_XXXX_RAID
348 tristate "3ware 5/6/7/8xxx ATA-RAID support"
349 depends on PCI && SCSI
351 3ware is the only hardware ATA-Raid product in Linux to date.
352 This card is 2,4, or 8 channel master mode support only.
353 SCSI support required!!!
355 <http://www.3ware.com/>
357 Please read the comments at the top of
358 <file:drivers/scsi/3w-xxxx.c>.
361 tristate "HP Smart Array SCSI driver"
362 depends on PCI && SCSI
363 select CHECK_SIGNATURE
364 select SCSI_SAS_ATTRS
366 This driver supports HP Smart Array Controllers (circa 2009).
367 It is a SCSI alternative to the cciss driver, which is a block
368 driver. Anyone wishing to use HP Smart Array controllers who
369 would prefer the devices be presented to linux as SCSI devices,
370 rather than as generic block devices should say Y here.
373 tristate "3ware 9xxx SATA-RAID support"
374 depends on PCI && SCSI
376 This driver supports the 9000 series 3ware SATA-RAID cards.
378 <http://www.amcc.com>
380 Please read the comments at the top of
381 <file:drivers/scsi/3w-9xxx.c>.
384 tristate "3ware 97xx SAS/SATA-RAID support"
385 depends on PCI && SCSI
387 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
391 Please read the comments at the top of
392 <file:drivers/scsi/3w-sas.c>.
395 tristate "ACARD SCSI support"
396 depends on PCI && SCSI
398 This driver supports the ACARD SCSI host adapter.
399 Support Chip <ATP870 ATP876 ATP880 ATP885>
400 To compile this driver as a module, choose M here: the
401 module will be called atp870u.
404 tristate "Adaptec AHA152X/2825 support"
405 depends on ISA && SCSI
406 select SCSI_SPI_ATTRS
407 select CHECK_SIGNATURE
409 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
410 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
411 must be manually specified in this case.
413 It is explained in section 3.3 of the SCSI-HOWTO, available from
414 <http://www.tldp.org/docs.html#howto>. You might also want to
415 read the file <file:Documentation/scsi/aha152x.txt>.
417 To compile this driver as a module, choose M here: the
418 module will be called aha152x.
421 tristate "Adaptec AHA1542 support"
422 depends on ISA && SCSI && ISA_DMA_API
424 This is support for a SCSI host adapter. It is explained in section
425 3.4 of the SCSI-HOWTO, available from
426 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
427 purchased by Adaptec, and some former Trantor products are being
428 sold under the Adaptec name. If it doesn't work out of the box, you
429 may have to change some settings in <file:drivers/scsi/aha1542.h>.
431 To compile this driver as a module, choose M here: the
432 module will be called aha1542.
435 tristate "Adaptec AHA1740 support"
436 depends on EISA && SCSI
438 This is support for a SCSI host adapter. It is explained in section
439 3.5 of the SCSI-HOWTO, available from
440 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
441 of the box, you may have to change some settings in
442 <file:drivers/scsi/aha1740.h>.
444 To compile this driver as a module, choose M here: the
445 module will be called aha1740.
448 tristate "Adaptec AACRAID support"
449 depends on SCSI && PCI
451 This driver supports a variety of Dell, HP, Adaptec, IBM and
452 ICP storage products. For a list of supported products, refer
453 to <file:Documentation/scsi/aacraid.txt>.
455 To compile this driver as a module, choose M here: the module
456 will be called aacraid.
459 source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
460 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
461 source "drivers/scsi/aic94xx/Kconfig"
462 source "drivers/scsi/hisi_sas/Kconfig"
463 source "drivers/scsi/mvsas/Kconfig"
466 tristate "Marvell UMI driver"
467 depends on SCSI && PCI
469 Module for Marvell Universal Message Interface(UMI) driver
471 To compile this driver as a module, choose M here: the
472 module will be called mvumi.
475 tristate "Adaptec I2O RAID support "
476 depends on SCSI && PCI && VIRT_TO_BUS
478 This driver supports all of Adaptec's I2O based RAID controllers as
479 well as the DPT SmartRaid V cards. This is an Adaptec maintained
480 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
482 To compile this driver as a module, choose M here: the
483 module will be called dpt_i2o.
486 tristate "AdvanSys SCSI support"
488 depends on ISA || EISA || PCI
489 depends on ISA_DMA_API || !ISA
491 This is a driver for all SCSI host adapters manufactured by
492 AdvanSys. It is documented in the kernel source in
493 <file:drivers/scsi/advansys.c>.
495 To compile this driver as a module, choose M here: the
496 module will be called advansys.
499 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
500 depends on PCI && SCSI
502 This driver supports all of ARECA's SATA/SAS RAID controller cards.
503 This is an ARECA-maintained driver by Erich Chen.
504 If you have any problems, please mail to: <erich@areca.com.tw>.
505 Areca supports Linux RAID config tools.
506 Please link <http://www.areca.com.tw>
508 To compile this driver as a module, choose M here: the
509 module will be called arcmsr (modprobe arcmsr).
511 source "drivers/scsi/esas2r/Kconfig"
512 source "drivers/scsi/megaraid/Kconfig.megaraid"
513 source "drivers/scsi/mpt3sas/Kconfig"
514 source "drivers/scsi/smartpqi/Kconfig"
515 source "drivers/scsi/ufs/Kconfig"
518 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
519 depends on SCSI && PCI
521 This option enables support for HighPoint RocketRAID 3xxx/4xxx
524 To compile this driver as a module, choose M here; the module
525 will be called hptiop. If unsure, say N.
528 tristate "BusLogic SCSI support"
529 depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
531 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
532 Adapters. Consult the SCSI-HOWTO, available from
533 <http://www.tldp.org/docs.html#howto>, and the files
534 <file:Documentation/scsi/BusLogic.txt> and
535 <file:Documentation/scsi/FlashPoint.txt> for more information.
536 Note that support for FlashPoint is only available for 32-bit
539 To compile this driver as a module, choose M here: the
540 module will be called BusLogic.
542 config SCSI_FLASHPOINT
543 bool "FlashPoint support"
544 depends on SCSI_BUSLOGIC && PCI
546 This option allows you to add FlashPoint support to the
547 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
548 substantial, so users of MultiMaster Host Adapters may not
552 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)"
556 This driver adds support for the Mylex DAC960, AcceleRAID, and
557 eXtremeRAID PCI RAID controllers. This driver supports the
558 older, block based interface.
559 This driver is a reimplementation of the original DAC960
560 driver. If you have used the DAC960 driver you should enable
563 To compile this driver as a module, choose M here: the
564 module will be called myrb.
567 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
569 depends on !CPU_BIG_ENDIAN || COMPILE_TEST
572 This driver adds support for the Mylex DAC960, AcceleRAID, and
573 eXtremeRAID PCI RAID controllers. This driver supports the
574 newer, SCSI-based interface only.
575 This driver is a reimplementation of the original DAC960
576 driver. If you have used the DAC960 driver you should enable
579 To compile this driver as a module, choose M here: the
580 module will be called myrs.
583 tristate "VMware PVSCSI driver support"
584 depends on PCI && SCSI && X86
586 This driver supports VMware's para virtualized SCSI HBA.
587 To compile this driver as a module, choose M here: the
588 module will be called vmw_pvscsi.
590 config XEN_SCSI_FRONTEND
591 tristate "XEN SCSI frontend driver"
592 depends on SCSI && XEN
593 select XEN_XENBUS_FRONTEND
595 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
596 within another guest OS (usually Dom0).
597 Only needed if the kernel is running in a XEN guest and generic
598 SCSI access to a device is needed.
600 config HYPERV_STORAGE
601 tristate "Microsoft Hyper-V virtual storage driver"
602 depends on SCSI && HYPERV
603 depends on m || SCSI_FC_ATTRS != m
606 Select this option to enable the Hyper-V virtual storage driver.
609 tristate "LibFC module"
610 depends on SCSI_FC_ATTRS
613 Fibre Channel library module
616 tristate "LibFCoE module"
619 Library for Fibre Channel over Ethernet module
622 tristate "FCoE module"
626 Fibre Channel over Ethernet module
629 tristate "Cisco FNIC Driver"
630 depends on PCI && X86
633 This is support for the Cisco PCI-Express FCoE HBA.
635 To compile this driver as a module, choose M here and read
636 <file:Documentation/scsi/scsi.txt>.
637 The module will be called fnic.
640 tristate "Cisco SNIC Driver"
641 depends on PCI && SCSI
643 This is support for the Cisco PCI-Express SCSI HBA.
645 To compile this driver as a module, choose M here and read
646 <file:Documentation/scsi/scsi.txt>.
647 The module will be called snic.
649 config SCSI_SNIC_DEBUG_FS
650 bool "Cisco SNIC Driver Debugfs Support"
651 depends on SCSI_SNIC && DEBUG_FS
653 This enables to list debugging information from SNIC Driver
654 available via debugfs file system
657 tristate "DMX3191D SCSI support"
658 depends on PCI && SCSI
659 select SCSI_SPI_ATTRS
661 This is support for Domex DMX3191D SCSI Host Adapters.
663 To compile this driver as a module, choose M here: the
664 module will be called dmx3191d.
667 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
668 depends on PCI && SCSI
670 Formerly called GDT SCSI Disk Array Controller Support.
672 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
673 manufactured by Intel Corporation/ICP vortex GmbH. It is documented
674 in the kernel source in <file:drivers/scsi/gdth.c> and
675 <file:drivers/scsi/gdth.h>.
677 To compile this driver as a module, choose M here: the
678 module will be called gdth.
681 tristate "Intel(R) C600 Series Chipset SAS Controller"
682 depends on PCI && SCSI
684 select SCSI_SAS_LIBSAS
686 This driver supports the 6Gb/s SAS capabilities of the storage
687 control unit found in the Intel(R) C600 series chipset.
689 config SCSI_GENERIC_NCR5380
690 tristate "Generic NCR5380/53c400 SCSI ISA card support"
691 depends on ISA && SCSI && HAS_IOPORT_MAP
692 select SCSI_SPI_ATTRS
694 This is a driver for old ISA card SCSI controllers based on a
695 NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
696 Most boards such as the Trantor T130 fit this category, as do
697 various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
699 To compile this driver as a module, choose M here: the
700 module will be called g_NCR5380.
703 tristate "IBM ServeRAID support"
704 depends on PCI && SCSI
706 This is support for the IBM ServeRAID hardware RAID controllers.
707 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
708 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
709 for more information. If this driver does not work correctly
710 without modification please contact the author by email at
711 <ipslinux@adaptec.com>.
713 To compile this driver as a module, choose M here: the
714 module will be called ips.
717 tristate "IBM Virtual SCSI support"
718 depends on PPC_PSERIES
719 select SCSI_SRP_ATTRS
721 This is the IBM POWER Virtual SCSI Client
723 To compile this driver as a module, choose M here: the
724 module will be called ibmvscsi.
726 config SCSI_IBMVSCSIS
727 tristate "IBM Virtual SCSI Server support"
728 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
730 This is the IBM POWER Virtual SCSI Target Server
731 This driver uses the SRP protocol for communication between servers
732 guest and/or the host that run on the same server.
733 More information on VSCSI protocol can be found at www.power.org
735 The userspace configuration needed to initialize the driver can be
738 https://github.com/powervm/ibmvscsis/wiki/Configuration
740 To compile this driver as a module, choose M here: the
741 module will be called ibmvscsis.
744 tristate "IBM Virtual FC support"
745 depends on PPC_PSERIES && SCSI
746 depends on SCSI_FC_ATTRS
748 This is the IBM POWER Virtual FC Client
750 To compile this driver as a module, choose M here: the
751 module will be called ibmvfc.
753 config SCSI_IBMVFC_TRACE
754 bool "enable driver internal trace"
755 depends on SCSI_IBMVFC
758 If you say Y here, the driver will trace all commands issued
759 to the adapter. Performance impact is minimal. Trace can be
760 dumped using /sys/class/scsi_host/hostXX/trace.
763 tristate "Initio 9100U(W) support"
764 depends on PCI && SCSI
766 This is support for the Initio 91XXU(W) SCSI host adapter. Please
767 read the SCSI-HOWTO, available from
768 <http://www.tldp.org/docs.html#howto>.
770 To compile this driver as a module, choose M here: the
771 module will be called initio.
774 tristate "Initio INI-A100U2W support"
775 depends on PCI && SCSI
777 This is support for the Initio INI-A100U2W SCSI host adapter.
778 Please read the SCSI-HOWTO, available from
779 <http://www.tldp.org/docs.html#howto>.
781 To compile this driver as a module, choose M here: the
782 module will be called a100u2w.
785 tristate "IOMEGA parallel port (ppa - older drives)"
786 depends on SCSI && PARPORT_PC
788 This driver supports older versions of IOMEGA's parallel port ZIP
789 drive (a 100 MB removable media device).
791 Note that you can say N here if you have the SCSI version of the ZIP
792 drive: it will be supported automatically if you said Y to the
793 generic "SCSI disk support", above.
795 If you have the ZIP Plus drive or a more recent parallel port ZIP
796 drive (if the supplied cable with the drive is labeled "AutoDetect")
797 then you should say N here and Y to "IOMEGA parallel port (imm -
798 newer drives)", below.
800 For more information about this driver and how to use it you should
801 read the file <file:Documentation/scsi/ppa.txt>. You should also read
802 the SCSI-HOWTO, which is available from
803 <http://www.tldp.org/docs.html#howto>. If you use this driver,
804 you will still be able to use the parallel port for other tasks,
805 such as a printer; it is safe to compile both drivers into the
808 To compile this driver as a module, choose M here: the
809 module will be called ppa.
812 tristate "IOMEGA parallel port (imm - newer drives)"
813 depends on SCSI && PARPORT_PC
815 This driver supports newer versions of IOMEGA's parallel port ZIP
816 drive (a 100 MB removable media device).
818 Note that you can say N here if you have the SCSI version of the ZIP
819 drive: it will be supported automatically if you said Y to the
820 generic "SCSI disk support", above.
822 If you have the ZIP Plus drive or a more recent parallel port ZIP
823 drive (if the supplied cable with the drive is labeled "AutoDetect")
824 then you should say Y here; if you have an older ZIP drive, say N
825 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
827 For more information about this driver and how to use it you should
828 read the file <file:Documentation/scsi/ppa.txt>. You should also read
829 the SCSI-HOWTO, which is available from
830 <http://www.tldp.org/docs.html#howto>. If you use this driver,
831 you will still be able to use the parallel port for other tasks,
832 such as a printer; it is safe to compile both drivers into the
835 To compile this driver as a module, choose M here: the
836 module will be called imm.
838 config SCSI_IZIP_EPP16
839 bool "ppa/imm option - Use slow (but safe) EPP-16"
840 depends on SCSI_PPA || SCSI_IMM
842 EPP (Enhanced Parallel Port) is a standard for parallel ports which
843 allows them to act as expansion buses that can handle up to 64
846 Some parallel port chipsets are slower than their motherboard, and
847 so we have to control the state of the chipset's FIFO queue every
848 now and then to avoid data loss. This will be done if you say Y
851 Generally, saying Y is the safe option and slows things down a bit.
853 config SCSI_IZIP_SLOW_CTR
854 bool "ppa/imm option - Assume slow parport control register"
855 depends on SCSI_PPA || SCSI_IMM
857 Some parallel ports are known to have excessive delays between
858 changing the parallel port control register and good data being
859 available on the parallel port data/status register. This option
860 forces a small delay (1.0 usec to be exact) after changing the
861 control register to let things settle out. Enabling this option may
862 result in a big drop in performance but some very old parallel ports
863 (found in 386 vintage machines) will not work properly.
865 Generally, saying N is fine.
868 tristate "HP Lasi SCSI support for 53c700/710"
869 depends on GSC && SCSI
870 select SCSI_SPI_ATTRS
872 This is a driver for the SCSI controller in the Lasi chip found in
873 many PA-RISC workstations & servers. If you do not know whether you
874 have a Lasi chip, it is safe to say "Y" here.
876 config SCSI_SNI_53C710
877 tristate "SNI RM SCSI support for 53c710"
878 depends on SNI_RM && SCSI
879 select SCSI_SPI_ATTRS
880 select 53C700_LE_ON_BE
882 This is a driver for the onboard SCSI controller found in older
883 SNI RM workstations & servers.
885 config 53C700_LE_ON_BE
887 depends on SCSI_LASI700
891 tristate "Promise SuperTrak EX Series support"
892 depends on PCI && SCSI
894 This driver supports Promise SuperTrak EX series storage controllers.
896 Promise provides Linux RAID configuration utility for these
897 controllers. Please visit <http://www.promise.com> to download.
899 To compile this driver as a module, choose M here: the
900 module will be called stex.
904 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
907 config SCSI_SYM53C8XX_2
908 tristate "SYM53C8XX Version 2 SCSI support"
909 depends on PCI && SCSI
910 select SCSI_SPI_ATTRS
912 This driver supports the whole NCR53C8XX/SYM53C8XX family of
913 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
914 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
915 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
916 controllers; you need to use the Fusion MPT driver for that.
918 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
921 config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
922 int "DMA addressing mode"
923 depends on SCSI_SYM53C8XX_2
926 This option only applies to PCI-SCSI chips that are PCI DAC
927 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
929 When set to 0, the driver will program the chip to only perform
930 32-bit DMA. When set to 1, the chip will be able to perform DMA
931 to addresses up to 1TB. When set to 2, the driver supports the
932 full 64-bit DMA address range, but can only address 16 segments
933 of 4 GB each. This limits the total addressable range to 64 GB.
935 Most machines with less than 4GB of memory should use a setting
936 of 0 for best performance. If your machine has 4GB of memory
937 or more, you should set this option to 1 (the default).
939 The still experimental value 2 (64 bit DMA addressing with 16
940 x 4GB segments limitation) can be used on systems that require
941 PCI address bits past bit 39 to be set for the addressing of
942 memory using PCI DAC cycles.
944 config SCSI_SYM53C8XX_DEFAULT_TAGS
945 int "Default tagged command queue depth"
946 depends on SCSI_SYM53C8XX_2
949 This is the default value of the command queue depth the
950 driver will announce to the generic SCSI layer for devices
951 that support tagged command queueing. This value can be changed
952 from the boot command line. This is a soft limit that cannot
953 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
955 config SCSI_SYM53C8XX_MAX_TAGS
956 int "Maximum number of queued commands"
957 depends on SCSI_SYM53C8XX_2
960 This option allows you to specify the maximum number of commands
961 that can be queued to any device, when tagged command queuing is
962 possible. The driver supports up to 256 queued commands per device.
963 This value is used as a compiled-in hard limit.
965 config SCSI_SYM53C8XX_MMIO
966 bool "Use memory mapped IO"
967 depends on SCSI_SYM53C8XX_2
970 Memory mapped IO is faster than Port IO. Most people should
971 answer Y here, but some machines may have problems. If you have
972 to answer N here, please report the problem to the maintainer.
975 tristate "IBM Power Linux RAID adapter support"
976 depends on PCI && SCSI && ATA
981 This driver supports the IBM Power Linux family RAID adapters.
982 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
983 as IBM iSeries 5702, 5703, 5709, and 570A.
985 config SCSI_IPR_TRACE
986 bool "enable driver internal trace"
990 If you say Y here, the driver will trace all commands issued
991 to the adapter. Performance impact is minimal. Trace can be
992 dumped using /sys/bus/class/scsi_host/hostXX/trace.
995 bool "enable adapter dump support"
999 If you say Y here, the driver will support adapter crash dump.
1000 If you enable this support, the iprdump daemon can be used
1001 to capture adapter failure analysis information.
1004 tristate "Zalon SCSI support"
1005 depends on GSC && SCSI
1006 select SCSI_SPI_ATTRS
1008 The Zalon is a GSC/HSC bus interface chip that sits between the
1009 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1010 C110, J200, J210 and some D, K & R-class machines. It's also
1011 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1012 Say Y here if you have one of these machines or cards.
1014 config SCSI_NCR53C8XX_DEFAULT_TAGS
1015 int "default tagged command queue depth"
1016 depends on SCSI_ZALON
1019 "Tagged command queuing" is a feature of SCSI-2 which improves
1020 performance: the host adapter can send several SCSI commands to a
1021 device's queue even if previous commands haven't finished yet.
1022 Because the device is intelligent, it can optimize its operations
1023 (like head positioning) based on its own request queue. Some SCSI
1024 devices don't implement this properly; if you want to disable this
1025 feature, enter 0 or 1 here (it doesn't matter which).
1027 The default value is 8 and should be supported by most hard disks.
1028 This value can be overridden from the boot command line using the
1029 'tags' option as follows (example):
1030 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1031 4, set queue depth to 16 for target 2 and target 3 on controller 0
1032 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1034 The normal answer therefore is to go with the default 8 and to use
1035 a boot command line option for devices that need to use a different
1036 command queue depth.
1038 There is no safe option other than using good SCSI devices.
1040 config SCSI_NCR53C8XX_MAX_TAGS
1041 int "maximum number of queued commands"
1042 depends on SCSI_ZALON
1045 This option allows you to specify the maximum number of commands
1046 that can be queued to any device, when tagged command queuing is
1047 possible. The default value is 32. Minimum is 2, maximum is 64.
1048 Modern hard disks are able to support 64 tags and even more, but
1049 do not seem to be faster when more than 32 tags are being used.
1051 So, the normal answer here is to go with the default value 32 unless
1052 you are using very large hard disks with large cache (>= 1 MB) that
1053 are able to take advantage of more than 32 tagged commands.
1055 There is no safe option and the default answer is recommended.
1057 config SCSI_NCR53C8XX_SYNC
1058 int "synchronous transfers frequency in MHz"
1059 depends on SCSI_ZALON
1062 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1063 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1064 are respectively the maximum data transfer rates in mega-transfers
1065 per second for each class. For example, a FAST-20 Wide 16 device is
1066 able to transfer data at 20 million 16 bit packets per second for a
1067 total rate of 40 MB/s.
1069 You may specify 0 if you want to only use asynchronous data
1070 transfers. This is the safest and slowest option. Otherwise, specify
1071 a value between 5 and 80, depending on the capability of your SCSI
1072 controller. The higher the number, the faster the data transfer.
1073 Note that 80 should normally be ok since the driver decreases the
1074 value automatically according to the controller's capabilities.
1076 Your answer to this question is ignored for controllers with NVRAM,
1077 since the driver will get this information from the user set-up. It
1078 also can be overridden using a boot setup option, as follows
1079 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1080 for FAST-20 synchronous data transfer (20 mega-transfers per
1083 The normal answer therefore is not to go with the default but to
1084 select the maximum value 80 allowing the driver to use the maximum
1085 value supported by each controller. If this causes problems with
1086 your SCSI devices, you should come back and decrease the value.
1088 There is no safe option other than using good cabling, right
1089 terminations and SCSI conformant devices.
1091 config SCSI_NCR53C8XX_NO_DISCONNECT
1092 bool "not allow targets to disconnect"
1093 depends on SCSI_ZALON && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1095 This option is only provided for safety if you suspect some SCSI
1096 device of yours to not support properly the target-disconnect
1097 feature. In that case, you would say Y here. In general however, to
1098 not allow targets to disconnect is not reasonable if there is more
1099 than 1 device on a SCSI bus. The normal answer therefore is N.
1101 config SCSI_QLOGIC_FAS
1102 tristate "Qlogic FAS SCSI support"
1103 depends on ISA && SCSI
1105 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1106 FastSCSI! cards as well as any other card based on the FASXX chip
1107 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1109 This driver does NOT support the PCI versions of these cards. The
1110 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1111 SCSI support"), below.
1113 Information about this driver is contained in
1114 <file:Documentation/scsi/qlogicfas.txt>. You should also read the
1115 SCSI-HOWTO, available from
1116 <http://www.tldp.org/docs.html#howto>.
1118 To compile this driver as a module, choose M here: the
1119 module will be called qlogicfas.
1121 config SCSI_QLOGIC_1280
1122 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1123 depends on PCI && SCSI
1125 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1127 To compile this driver as a module, choose M here: the
1128 module will be called qla1280.
1130 config SCSI_QLOGICPTI
1131 tristate "PTI Qlogic, ISP Driver"
1132 depends on SBUS && SCSI
1134 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1135 controllers are known under Solaris as qpti and in the openprom as
1136 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1137 driven by a different driver.
1139 To compile this driver as a module, choose M here: the
1140 module will be called qlogicpti.
1142 source "drivers/scsi/qla2xxx/Kconfig"
1143 source "drivers/scsi/qla4xxx/Kconfig"
1144 source "drivers/scsi/qedi/Kconfig"
1145 source "drivers/scsi/qedf/Kconfig"
1148 tristate "Emulex LightPulse Fibre Channel Support"
1149 depends on PCI && SCSI
1150 depends on SCSI_FC_ATTRS
1151 depends on NVME_TARGET_FC || NVME_TARGET_FC=n
1152 depends on NVME_FC || NVME_FC=n
1155 This lpfc driver supports the Emulex LightPulse
1156 Family of Fibre Channel PCI host adapters.
1158 config SCSI_LPFC_DEBUG_FS
1159 bool "Emulex LightPulse Fibre Channel debugfs Support"
1160 depends on SCSI_LPFC && DEBUG_FS
1162 This makes debugging information from the lpfc driver
1163 available via the debugfs filesystem.
1166 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1167 depends on EISA && SCSI
1168 select SCSI_SPI_ATTRS
1170 This driver is for NCR53c710 based SCSI host adapters.
1172 It currently supports Compaq EISA cards.
1175 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1176 depends on PCI && SCSI
1178 This driver supports PCI SCSI host adapters based on the ASIC
1179 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1181 This driver works, but is still in experimental status. So better
1182 have a bootable disk and a backup in case of emergency.
1184 Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
1186 To compile this driver as a module, choose M here: the
1187 module will be called dc395x.
1189 config SCSI_AM53C974
1190 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1191 depends on PCI && SCSI
1192 select SCSI_SPI_ATTRS
1194 This driver supports PCI SCSI host adapters based on the Am53C974A
1195 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1196 PCscsi/PCnet (Am53/79C974) solutions.
1197 This is a new implementation base on the generic esp_scsi driver.
1199 Note that this driver does NOT support Tekram DC390W/U/F, which are
1200 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1202 To compile this driver as a module, choose M here: the
1203 module will be called am53c974.
1206 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1207 depends on PCI && SCSI && !64BIT
1209 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1210 SCSI host adapter. Please read the SCSI-HOWTO, available from
1211 <http://www.tldp.org/docs.html#howto>.
1213 To compile this driver as a module, choose M here: the
1214 module will be called nsp32.
1217 tristate "Western Digital WD7193/7197/7296 support"
1218 depends on PCI && SCSI
1221 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
1222 SCSI controllers (based on WD33C296A chip).
1225 tristate "SCSI debugging host and device simulator"
1229 This pseudo driver simulates one or more hosts (SCSI initiators),
1230 each with one or more targets, each with one or more logical units.
1231 Defaults to one of each, creating a small RAM disk device. Many
1232 parameters found in the /sys/bus/pseudo/drivers/scsi_debug
1233 directory can be tweaked at run time.
1234 See <http://sg.danny.cz/sg/sdebug26.html> for more information.
1235 Mainly used for testing and best as a module. If unsure, say N.
1238 tristate "MESH (Power Mac internal SCSI) support"
1239 depends on PPC32 && PPC_PMAC && SCSI
1241 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1242 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1243 other Power Macintoshes do). Say Y to include support for this SCSI
1246 To compile this driver as a module, choose M here: the
1247 module will be called mesh.
1249 config SCSI_MESH_SYNC_RATE
1250 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1251 depends on SCSI_MESH
1254 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1255 drives a bus which is entirely internal to the machine (such as the
1256 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1257 operation at up to 10 MB/s. On machines where the SCSI bus
1258 controlled by the MESH can have external devices connected, it is
1259 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1260 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1261 to disable synchronous operation.
1263 config SCSI_MESH_RESET_DELAY_MS
1264 int "initial bus reset delay (ms) (0 = no reset)"
1265 depends on SCSI_MESH
1268 config SCSI_MAC53C94
1269 tristate "53C94 (Power Mac external SCSI) support"
1270 depends on PPC32 && PPC_PMAC && SCSI
1272 On Power Macintoshes (and clones) with two SCSI buses, the external
1273 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1274 machines which only have one SCSI bus, such as the 7200, also use
1275 the 53C94. Say Y to include support for the 53C94.
1277 To compile this driver as a module, choose M here: the
1278 module will be called mac53c94.
1280 source "drivers/scsi/arm/Kconfig"
1283 bool "MIPS JAZZ FAS216 SCSI support"
1284 depends on MACH_JAZZ && SCSI
1285 select SCSI_SPI_ATTRS
1287 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1288 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1292 tristate "A3000 WD33C93A support"
1293 depends on AMIGA && SCSI
1295 If you have an Amiga 3000 and have SCSI devices connected to the
1296 built-in SCSI controller, say Y. Otherwise, say N.
1298 To compile this driver as a module, choose M here: the
1299 module will be called a3000.
1302 tristate "A2091/A590 WD33C93A support"
1303 depends on ZORRO && SCSI
1305 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1308 To compile this driver as a module, choose M here: the
1309 module will be called a2091.
1312 tristate "GVP Series II WD33C93A support"
1313 depends on ZORRO && SCSI
1315 If you have a Great Valley Products Series II SCSI controller,
1316 answer Y. Also say Y if you have a later model of GVP SCSI
1317 controller (such as the GVP A4008 or a Combo board). Otherwise,
1318 answer N. This driver does NOT work for the T-Rex series of
1319 accelerators from TekMagic and GVP-M.
1321 To compile this driver as a module, choose M here: the
1322 module will be called gvp11.
1325 tristate "A4000T NCR53c710 SCSI support"
1326 depends on AMIGA && SCSI
1327 select SCSI_SPI_ATTRS
1329 If you have an Amiga 4000T and have SCSI devices connected to the
1330 built-in SCSI controller, say Y. Otherwise, say N.
1332 To compile this driver as a module, choose M here: the
1333 module will be called a4000t.
1335 config SCSI_ZORRO7XX
1336 tristate "Zorro NCR53c710 SCSI support"
1337 depends on ZORRO && SCSI
1338 select SCSI_SPI_ATTRS
1340 Support for various NCR53c710-based SCSI controllers on Zorro
1341 expansion boards for the Amiga.
1343 - the Amiga 4091 Zorro III SCSI-2 controller,
1344 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1346 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1347 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1348 accelerator card for the Amiga 1200,
1349 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1351 config SCSI_ZORRO_ESP
1352 tristate "Zorro ESP SCSI support"
1353 depends on ZORRO && SCSI
1354 select SCSI_SPI_ATTRS
1357 Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
1358 expansion boards for the Amiga.
1360 - the Phase5 Blizzard 1230 II and IV SCSI controllers,
1361 - the Phase5 Blizzard 2060 SCSI controller,
1362 - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
1364 - the Fastlane Zorro III SCSI controller.
1367 tristate "Atari native SCSI support"
1368 depends on ATARI && SCSI
1369 select SCSI_SPI_ATTRS
1371 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1372 Falcon, ...) say Y to get it supported. Of course also, if you have
1373 a compatible SCSI controller (e.g. for Medusa).
1375 To compile this driver as a module, choose M here: the module will
1376 be called atari_scsi. If you also enable NVRAM support, the SCSI
1377 host's ID is taken from the setting in TT RTC NVRAM.
1379 This driver supports both styles of NCR integration into the
1380 system: the TT style (separate DMA), and the Falcon style (via
1381 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1382 in the Hades (without DMA).
1385 tristate "Macintosh NCR5380 SCSI"
1386 depends on MAC && SCSI
1387 select SCSI_SPI_ATTRS
1389 This is the NCR 5380 SCSI controller included on most of the 68030
1390 based Macintoshes. If you have one of these say Y and read the
1391 SCSI-HOWTO, available from
1392 <http://www.tldp.org/docs.html#howto>.
1395 tristate "Macintosh NCR53c9[46] SCSI"
1396 depends on MAC && SCSI
1397 select SCSI_SPI_ATTRS
1400 This is the NCR 53c9x SCSI controller found on most of the 68040
1403 To compile this driver as a module, choose M here: the module
1404 will be called mac_esp.
1407 bool "WD33C93 SCSI driver for MVME147"
1408 depends on MVME147 && SCSI=y
1409 select SCSI_SPI_ATTRS
1411 Support for the on-board SCSI controller on the Motorola MVME147
1412 single-board computer.
1415 tristate "NCR53C710 SCSI driver for MVME16x"
1416 depends on MVME16x && SCSI
1417 select SCSI_SPI_ATTRS
1419 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1420 SCSI controller chip. Almost everyone using one of these boards
1421 will want to say Y to this question.
1423 config BVME6000_SCSI
1424 tristate "NCR53C710 SCSI driver for BVME6000"
1425 depends on BVME6000 && SCSI
1426 select SCSI_SPI_ATTRS
1428 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1429 SCSI controller chip. Almost everyone using one of these boards
1430 will want to say Y to this question.
1433 tristate "Sun3 NCR5380 SCSI"
1434 depends on SUN3 && SCSI
1435 select SCSI_SPI_ATTRS
1437 This option will enable support for the OBIO (onboard io) NCR5380
1438 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1439 "Sun3" type VME scsi controllers also based on the NCR5380.
1440 General Linux information on the Sun 3 series (now discontinued)
1441 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1444 bool "Sun3x ESP SCSI"
1445 depends on SUN3X && SCSI=y
1446 select SCSI_SPI_ATTRS
1448 The ESP was an on-board SCSI controller used on Sun 3/80
1449 machines. Say Y here to compile in support for it.
1452 tristate "Sparc ESP Scsi Driver"
1453 depends on SBUS && SCSI
1454 select SCSI_SPI_ATTRS
1456 This is the driver for the Sun ESP SCSI host adapter. The ESP
1457 chipset is present in most SPARC SBUS-based computers and
1458 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1459 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
1461 To compile this driver as a module, choose M here: the
1462 module will be called sun_esp.
1465 tristate "FCP host bus adapter driver for IBM eServer zSeries"
1466 depends on S390 && QDIO && SCSI
1467 depends on SCSI_FC_ATTRS
1469 If you want to access SCSI devices attached to your IBM eServer
1470 zSeries by means of Fibre Channel interfaces say Y.
1471 For details please refer to the documentation provided by IBM at
1472 <http://oss.software.ibm.com/developerworks/opensource/linux390>
1474 This driver is also available as a module. This module will be
1475 called zfcp. If you want to compile it as a module, say M here
1476 and read <file:Documentation/kbuild/modules.txt>.
1479 tristate "PMC SIERRA Linux MaxRAID adapter support"
1480 depends on PCI && SCSI && NET
1483 This driver supports the PMC SIERRA MaxRAID adapters.
1486 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1487 depends on PCI && SCSI
1488 select SCSI_SAS_LIBSAS
1490 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1491 based host adapters.
1494 tristate "Brocade BFA Fibre Channel Support"
1495 depends on PCI && SCSI
1496 depends on SCSI_FC_ATTRS
1498 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1500 To compile this driver as a module, choose M here. The module will
1504 tristate "virtio-scsi support"
1507 This is the virtual HBA driver for virtio. If the kernel will
1508 be used in a virtual machine, say Y or M.
1510 source "drivers/scsi/csiostor/Kconfig"
1512 endif # SCSI_LOWLEVEL
1514 source "drivers/scsi/pcmcia/Kconfig"
1516 source "drivers/scsi/device_handler/Kconfig"