drivers/scsi/3w-xxxx.c

   1 /*
   2    3w-xxxx.c -- 3ware Storage Controller device driver for Linux.
   3
   4    Written By: Adam Radford <aradford@gmail.com>
   5    Modifications By: Joel Jacobson <linux@3ware.com>
   6                      Arnaldo Carvalho de Melo <acme@conectiva.com.br>
   7                      Brad Strand <linux@3ware.com>
   8
   9    Copyright (C) 1999-2010 3ware Inc.
  10
  11    Kernel compatibility By:     Andre Hedrick <andre@suse.com>
  12    Non-Copyright (C) 2000       Andre Hedrick <andre@suse.com>
  13
  14    Further tiny build fixes and trivial hoovering    Alan Cox
  15
  16    This program is free software; you can redistribute it and/or modify
  17    it under the terms of the GNU General Public License as published by
  18    the Free Software Foundation; version 2 of the License.
  19
  20    This program is distributed in the hope that it will be useful,
  21    but WITHOUT ANY WARRANTY; without even the implied warranty of
  22    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23    GNU General Public License for more details.
  24
  25    NO WARRANTY
  26    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  27    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  28    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  29    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  30    solely responsible for determining the appropriateness of using and
  31    distributing the Program and assumes all risks associated with its
  32    exercise of rights under this Agreement, including but not limited to
  33    the risks and costs of program errors, damage to or loss of data,
  34    programs or equipment, and unavailability or interruption of operations.
  35
  36    DISCLAIMER OF LIABILITY
  37    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  38    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  39    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  40    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  41    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  42    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  43    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  44
  45    You should have received a copy of the GNU General Public License
  46    along with this program; if not, write to the Free Software
  47    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  48
  49    Bugs/Comments/Suggestions should be mailed to:
  50
  51    aradford@gmail.com
  52
  53
  54    History
  55    -------
  56    0.1.000 -     Initial release.
  57    0.4.000 -     Added support for Asynchronous Event Notification through
  58                  ioctls for 3DM.
  59    1.0.000 -     Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb
  60                  to disable drive write-cache before writes.
  61    1.1.000 -     Fixed performance bug with DPO & FUA not existing for WRITE_6.
  62    1.2.000 -     Added support for clean shutdown notification/feature table.
  63    1.02.00.001 - Added support for full command packet posts through ioctls
  64                  for 3DM.
  65                  Bug fix so hot spare drives don't show up.
  66    1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some
  67                  systems.
  68    08/21/00    - release previously allocated resources on failure at
  69                  tw_allocate_memory (acme)
  70    1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when
  71                  controller status is non-zero.
  72                  Added handling of request_sense opcode.
  73                  Fix possible null pointer dereference in
  74                  tw_reset_device_extension()
  75    1.02.00.004 - Add support for device id of 3ware 7000 series controllers.
  76                  Make tw_setfeature() call with interrupts disabled.
  77                  Register interrupt handler before enabling interrupts.
  78                  Clear attention interrupt before draining aen queue.
  79    1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for
  80                  6000 and 5000 series controllers.
  81                  Reduce polling mdelays causing problems on some systems.
  82                  Fix use_sg = 1 calculation bug.
  83                  Check for scsi_register returning NULL.
  84                  Add aen count to /proc/scsi/3w-xxxx.
  85                  Remove aen code unit masking in tw_aen_complete().
  86    1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing
  87                  possible oops.
  88                  Fix possible null pointer dereference in tw_scsi_queue()
  89                  if done function pointer was invalid.
  90    1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl().
  91                  Remove check for invalid done function pointer from
  92                  tw_scsi_queue().
  93    1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards().
  94                  Add tw_decode_error() for printing readable error messages.
  95                  Print some useful information on certain aen codes.
  96                  Add tw_decode_bits() for interpreting status register output.
  97                  Make scsi_set_pci_device() for kernels >= 2.4.4
  98                  Fix bug where aen's could be lost before a reset.
  99                  Re-add spinlocks in tw_scsi_detect().
 100                  Fix possible null pointer dereference in tw_aen_drain_queue()
 101                  during initialization.
 102                  Clear pci parity errors during initialization and during io.
 103    1.02.00.009 - Remove redundant increment in tw_state_request_start().
 104                  Add ioctl support for direct ATA command passthru.
 105                  Add entire aen code string list.
 106    1.02.00.010 - Cleanup queueing code, fix jbod thoughput.
 107                  Fix get_param for specific units.
 108    1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost.
 109                  Fix tw_aen_drain_queue() to display useful info at init.
 110                  Set tw_host->max_id for 12 port cards.
 111                  Add ioctl support for raw command packet post from userspace
 112                  with sglist fragments (parameter and io).
 113    1.02.00.012 - Fix read capacity to under report by 1 sector to fix get
 114                  last sector ioctl.
 115    1.02.00.013 - Fix bug where more AEN codes weren't coming out during
 116                  driver initialization.
 117                  Improved handling of PCI aborts.
 118    1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost.
 119                  Increase timeout in tw_aen_drain_queue() to 30 seconds.
 120    1.02.00.015 - Re-write raw command post with data ioctl method.
 121                  Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5
 122                  Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5
 123                  Replace io_request_lock with host_lock for kernel 2.5
 124                  Set max_cmd_len to 16 for 3dm for kernel 2.5
 125    1.02.00.016 - Set host->max_sectors back up to 256.
 126    1.02.00.017 - Modified pci parity error handling/clearing from config space
 127                  during initialization.
 128    1.02.00.018 - Better handling of request sense opcode and sense information
 129                  for failed commands.  Add tw_decode_sense().
 130                  Replace all mdelay()'s with scsi_sleep().
 131    1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on
 132                  some SMP systems.
 133    1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to
 134                  pci_alloc/free_consistent().
 135                  Better alignment checking in tw_allocate_memory().
 136                  Cleanup tw_initialize_device_extension().
 137    1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance.
 138                  Improve handling of errors in tw_interrupt().
 139                  Add handling/clearing of controller queue error.
 140                  Empty stale responses before draining aen queue.
 141                  Fix tw_scsi_eh_abort() to not reset on every io abort.
 142                  Set can_queue in SHT to 255 to prevent hang from AEN.
 143    1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release().
 144    1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero.
 145    1.02.00.024 - Add severity levels to AEN strings.
 146    1.02.00.025 - Fix command interrupt spurious error messages.
 147                  Fix bug in raw command post with data ioctl method.
 148                  Fix bug where rollcall sometimes failed with cable errors.
 149                  Print unit # on all command timeouts.
 150    1.02.00.026 - Fix possible infinite retry bug with power glitch induced
 151                  drive timeouts.
 152                  Cleanup some AEN severity levels.
 153    1.02.00.027 - Add drive not supported AEN code for SATA controllers.
 154                  Remove spurious unknown ioctl error message.
 155    1.02.00.028 - Fix bug where multiple controllers with no units were the
 156                  same card number.
 157                  Fix bug where cards were being shut down more than once.
 158    1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory().
 159                  Replace pci_map_single() with pci_map_page() for highmem.
 160                  Check for tw_setfeature() failure.
 161    1.02.00.030 - Make driver 64-bit clean.
 162    1.02.00.031 - Cleanup polling timeouts/routines in several places.
 163                  Add support for mode sense opcode.
 164                  Add support for cache mode page.
 165                  Add support for synchronize cache opcode.
 166    1.02.00.032 - Fix small multicard rollcall bug.
 167                  Make driver stay loaded with no units for hot add/swap.
 168                  Add support for "twe" character device for ioctls.
 169                  Clean up request_id queueing code.
 170                  Fix tw_scsi_queue() spinlocks.
 171    1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's.
 172                  Initialize queues correctly when loading with no valid units.
 173    1.02.00.034 - Fix tw_decode_bits() to handle multiple errors.
 174                  Add support for user configurable cmd_per_lun.
 175                  Add support for sht->slave_configure().
 176    1.02.00.035 - Improve tw_allocate_memory() memory allocation.
 177                  Fix tw_chrdev_ioctl() to sleep correctly.
 178    1.02.00.036 - Increase character ioctl timeout to 60 seconds.
 179    1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds
 180                  for 'smartmontools' support.
 181    1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6.
 182                  Add support for cmds_per_lun module parameter.
 183    1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code.
 184                  Fix data_buffer_length usage in tw_chrdev_ioctl().
 185                  Update contact information.
 186    1.26.02.000 - Convert driver to pci_driver format.
 187    1.26.02.001 - Increase max ioctl buffer size to 512 sectors.
 188                  Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'.
 189                  Fix tw_remove() to free irq handler/unregister_chrdev()
 190                  before shutting down card.
 191                  Change to new 'change_queue_depth' api.
 192                  Fix 'handled=1' ISR usage, remove bogus IRQ check.
 193    1.26.02.002 - Free irq handler in __tw_shutdown().
 194                  Turn on RCD bit for caching mode page.
 195                  Serialize reset code.
 196    1.26.02.003 - Force 60 second timeout default.
 197 */
 198
 199 #include <linux/module.h>
 200 #include <linux/reboot.h>
 201 #include <linux/spinlock.h>
 202 #include <linux/interrupt.h>
 203 #include <linux/moduleparam.h>
 204 #include <linux/errno.h>
 205 #include <linux/types.h>
 206 #include <linux/delay.h>
 207 #include <linux/gfp.h>
 208 #include <linux/pci.h>
 209 #include <linux/time.h>
 210 #include <linux/mutex.h>
 211 #include <asm/io.h>
 212 #include <asm/irq.h>
 213 #include <linux/uaccess.h>
 214 #include <scsi/scsi.h>
 215 #include <scsi/scsi_host.h>
 216 #include <scsi/scsi_tcq.h>
 217 #include <scsi/scsi_cmnd.h>
 218 #include <scsi/scsi_eh.h>
 219 #include "3w-xxxx.h"
 220
 221 /* Globals */
 222 #define TW_DRIVER_VERSION "1.26.02.003"
 223 static DEFINE_MUTEX(tw_mutex);
 224 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
 225 static int tw_device_extension_count = 0;
 226 static int twe_major = -1;
 227
 228 /* Module parameters */
 229 MODULE_AUTHOR("LSI");
 230 MODULE_DESCRIPTION("3ware Storage Controller Linux Driver");
 231 MODULE_LICENSE("GPL");
 232 MODULE_VERSION(TW_DRIVER_VERSION);
 233
 234 /* Function prototypes */
 235 static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
 236
 237 /* Functions */
 238
 239 /* This function will check the status register for unexpected bits */
 240 static int tw_check_bits(u32 status_reg_value)
 241 {
 242         if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) {
 243                 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value);
 244                 return 1;
 245         }
 246         if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) {
 247                 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value);
 248                 return 1;
 249         }
 250
 251         return 0;
 252 } /* End tw_check_bits() */
 253
 254 /* This function will print readable messages from status register errors */
 255 static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host)
 256 {
 257         char host[16];
 258
 259         dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n");
 260
 261         if (print_host)
 262                 sprintf(host, " scsi%d:", tw_dev->host->host_no);
 263         else
 264                 host[0] = '\0';
 265
 266         if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) {
 267                 printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host);
 268                 outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 269         }
 270
 271         if (status_reg_value & TW_STATUS_PCI_ABORT) {
 272                 printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host);
 273                 outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev));
 274                 pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT);
 275         }
 276
 277         if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
 278                 printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host);
 279                 outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 280         }
 281
 282         if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) {
 283                 printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host);
 284                 outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 285         }
 286
 287         if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
 288                 if (tw_dev->reset_print == 0) {
 289                         printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host);
 290                         tw_dev->reset_print = 1;
 291                 }
 292                 return 1;
 293         }
 294
 295         return 0;
 296 } /* End tw_decode_bits() */
 297
 298 /* This function will poll the status register for a flag */
 299 static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 300 {
 301         u32 status_reg_value;
 302         unsigned long before;
 303         int retval = 1;
 304
 305         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 306         before = jiffies;
 307
 308         if (tw_check_bits(status_reg_value))
 309                 tw_decode_bits(tw_dev, status_reg_value, 0);
 310
 311         while ((status_reg_value & flag) != flag) {
 312                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 313
 314                 if (tw_check_bits(status_reg_value))
 315                         tw_decode_bits(tw_dev, status_reg_value, 0);
 316
 317                 if (time_after(jiffies, before + HZ * seconds))
 318                         goto out;
 319
 320                 msleep(50);
 321         }
 322         retval = 0;
 323 out:
 324         return retval;
 325 } /* End tw_poll_status() */
 326
 327 /* This function will poll the status register for disappearance of a flag */
 328 static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 329 {
 330         u32 status_reg_value;
 331         unsigned long before;
 332         int retval = 1;
 333
 334         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 335         before = jiffies;
 336
 337         if (tw_check_bits(status_reg_value))
 338                 tw_decode_bits(tw_dev, status_reg_value, 0);
 339
 340         while ((status_reg_value & flag) != 0) {
 341                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 342
 343                 if (tw_check_bits(status_reg_value))
 344                         tw_decode_bits(tw_dev, status_reg_value, 0);
 345
 346                 if (time_after(jiffies, before + HZ * seconds))
 347                         goto out;
 348
 349                 msleep(50);
 350         }
 351         retval = 0;
 352 out:
 353         return retval;
 354 } /* End tw_poll_status_gone() */
 355
 356 /* This function will attempt to post a command packet to the board */
 357 static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
 358 {
 359         u32 status_reg_value;
 360         unsigned long command_que_value;
 361
 362         dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");
 363         command_que_value = tw_dev->command_packet_physical_address[request_id];
 364         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 365
 366         if (tw_check_bits(status_reg_value)) {
 367                 dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n");
 368                 tw_decode_bits(tw_dev, status_reg_value, 1);
 369         }
 370
 371         if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 372                 /* We successfully posted the command packet */
 373                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 374                 tw_dev->state[request_id] = TW_S_POSTED;
 375                 tw_dev->posted_request_count++;
 376                 if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
 377                         tw_dev->max_posted_request_count = tw_dev->posted_request_count;
 378                 }
 379         } else {
 380                 /* Couldn't post the command packet, so we do it in the isr */
 381                 if (tw_dev->state[request_id] != TW_S_PENDING) {
 382                         tw_dev->state[request_id] = TW_S_PENDING;
 383                         tw_dev->pending_request_count++;
 384                         if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
 385                                 tw_dev->max_pending_request_count = tw_dev->pending_request_count;
 386                         }
 387                         tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
 388                         if (tw_dev->pending_tail == TW_Q_LENGTH-1) {
 389                                 tw_dev->pending_tail = TW_Q_START;
 390                         } else {
 391                                 tw_dev->pending_tail = tw_dev->pending_tail + 1;
 392                         }
 393                 }
 394                 TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
 395                 return 1;
 396         }
 397         return 0;
 398 } /* End tw_post_command_packet() */
 399
 400 /* This function will return valid sense buffer information for failed cmds */
 401 static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense)
 402 {
 403         int i;
 404         TW_Command *command;
 405
 406         dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n");
 407         command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 408
 409         printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid));
 410
 411         /* Attempt to return intelligent sense information */
 412         if (fill_sense) {
 413                 if ((command->status == 0xc7) || (command->status == 0xcb)) {
 414                         for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) {
 415                                 if (command->flags == tw_sense_table[i][0]) {
 416
 417                                         /* Valid bit and 'current errors' */
 418                                         tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70);
 419
 420                                         /* Sense key */
 421                                         tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1];
 422
 423                                         /* Additional sense length */
 424                                         tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */
 425
 426                                         /* Additional sense code */
 427                                         tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2];
 428
 429                                         /* Additional sense code qualifier */
 430                                         tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3];
 431
 432                                         tw_dev->srb[request_id]->result = (DID_OK << 16) | SAM_STAT_CHECK_CONDITION;
 433                                         return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */
 434                                 }
 435                         }
 436                 }
 437
 438                 /* If no table match, error so we get a reset */
 439                 return 1;
 440         }
 441
 442         return 0;
 443 } /* End tw_decode_sense() */
 444
 445 /* This function will report controller error status */
 446 static int tw_check_errors(TW_Device_Extension *tw_dev)
 447 {
 448         u32 status_reg_value;
 449
 450         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 451
 452         if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) {
 453                 tw_decode_bits(tw_dev, status_reg_value, 0);
 454                 return 1;
 455         }
 456
 457         return 0;
 458 } /* End tw_check_errors() */
 459
 460 /* This function will empty the response que */
 461 static void tw_empty_response_que(TW_Device_Extension *tw_dev)
 462 {
 463         u32 status_reg_value;
 464
 465         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 466
 467         while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
 468                 inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 469                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 470         }
 471 } /* End tw_empty_response_que() */
 472
 473 /* This function will free a request_id */
 474 static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id)
 475 {
 476         tw_dev->free_queue[tw_dev->free_tail] = request_id;
 477         tw_dev->state[request_id] = TW_S_FINISHED;
 478         tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
 479 } /* End tw_state_request_finish() */
 480
 481 /* This function will assign an available request_id */
 482 static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id)
 483 {
 484         *request_id = tw_dev->free_queue[tw_dev->free_head];
 485         tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
 486         tw_dev->state[*request_id] = TW_S_STARTED;
 487 } /* End tw_state_request_start() */
 488
 489 /* Show some statistics about the card */
 490 static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr,
 491                              char *buf)
 492 {
 493         struct Scsi_Host *host = class_to_shost(dev);
 494         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 495         unsigned long flags = 0;
 496         ssize_t len;
 497
 498         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 499         len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n"
 500                        "Current commands posted:   %4d\n"
 501                        "Max commands posted:       %4d\n"
 502                        "Current pending commands:  %4d\n"
 503                        "Max pending commands:      %4d\n"
 504                        "Last sgl length:           %4d\n"
 505                        "Max sgl length:            %4d\n"
 506                        "Last sector count:         %4d\n"
 507                        "Max sector count:          %4d\n"
 508                        "SCSI Host Resets:          %4d\n"
 509                        "AEN's:                     %4d\n",
 510                        TW_DRIVER_VERSION,
 511                        tw_dev->posted_request_count,
 512                        tw_dev->max_posted_request_count,
 513                        tw_dev->pending_request_count,
 514                        tw_dev->max_pending_request_count,
 515                        tw_dev->sgl_entries,
 516                        tw_dev->max_sgl_entries,
 517                        tw_dev->sector_count,
 518                        tw_dev->max_sector_count,
 519                        tw_dev->num_resets,
 520                        tw_dev->aen_count);
 521         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 522         return len;
 523 } /* End tw_show_stats() */
 524
 525 /* Create sysfs 'stats' entry */
 526 static struct device_attribute tw_host_stats_attr = {
 527         .attr = {
 528                 .name =         "stats",
 529                 .mode =         S_IRUGO,
 530         },
 531         .show = tw_show_stats
 532 };
 533
 534 /* Host attributes initializer */
 535 static struct device_attribute *tw_host_attrs[] = {
 536         &tw_host_stats_attr,
 537         NULL,
 538 };
 539
 540 /* This function will read the aen queue from the isr */
 541 static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
 542 {
 543         TW_Command *command_packet;
 544         TW_Param *param;
 545         unsigned long command_que_value;
 546         u32 status_reg_value;
 547         unsigned long param_value = 0;
 548
 549         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");
 550
 551         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 552         if (tw_check_bits(status_reg_value)) {
 553                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n");
 554                 tw_decode_bits(tw_dev, status_reg_value, 1);
 555                 return 1;
 556         }
 557         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 558                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
 559                 return 1;
 560         }
 561         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 562         memset(command_packet, 0, sizeof(TW_Sector));
 563         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 564         command_packet->size = 4;
 565         command_packet->request_id = request_id;
 566         command_packet->status = 0;
 567         command_packet->flags = 0;
 568         command_packet->byte6.parameter_count = 1;
 569         command_que_value = tw_dev->command_packet_physical_address[request_id];
 570         if (command_que_value == 0) {
 571                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
 572                 return 1;
 573         }
 574         /* Now setup the param */
 575         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 576                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
 577                 return 1;
 578         }
 579         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 580         memset(param, 0, sizeof(TW_Sector));
 581         param->table_id = 0x401; /* AEN table */
 582         param->parameter_id = 2; /* Unit code */
 583         param->parameter_size_bytes = 2;
 584         param_value = tw_dev->alignment_physical_address[request_id];
 585         if (param_value == 0) {
 586                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
 587                 return 1;
 588         }
 589         command_packet->byte8.param.sgl[0].address = param_value;
 590         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 591
 592         /* Now post the command packet */
 593         if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 594                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n");
 595                 tw_dev->srb[request_id] = NULL; /* Flag internal command */
 596                 tw_dev->state[request_id] = TW_S_POSTED;
 597                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 598         } else {
 599                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
 600                 return 1;
 601         }
 602
 603         return 0;
 604 } /* End tw_aen_read_queue() */
 605
 606 /* This function will complete an aen request from the isr */
 607 static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id)
 608 {
 609         TW_Param *param;
 610         unsigned short aen;
 611         int error = 0, table_max = 0;
 612
 613         dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n");
 614         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 615                 printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
 616                 return 1;
 617         }
 618         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 619         aen = *(unsigned short *)(param->data);
 620         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen);
 621
 622         /* Print some useful info when certain aen codes come out */
 623         if (aen == 0x0ff) {
 624                 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no);
 625         } else {
 626                 table_max = ARRAY_SIZE(tw_aen_string);
 627                 if ((aen & 0x0ff) < table_max) {
 628                         if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 629                                 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8);
 630                         } else {
 631                                 if (aen != 0x0)
 632                                         printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]);
 633                         }
 634                 } else {
 635                         printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen);
 636                 }
 637         }
 638         if (aen != TW_AEN_QUEUE_EMPTY) {
 639                 tw_dev->aen_count++;
 640
 641                 /* Now queue the code */
 642                 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 643                 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 644                         tw_dev->aen_tail = TW_Q_START;
 645                 } else {
 646                         tw_dev->aen_tail = tw_dev->aen_tail + 1;
 647                 }
 648                 if (tw_dev->aen_head == tw_dev->aen_tail) {
 649                         if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 650                                 tw_dev->aen_head = TW_Q_START;
 651                         } else {
 652                                 tw_dev->aen_head = tw_dev->aen_head + 1;
 653                         }
 654                 }
 655
 656                 error = tw_aen_read_queue(tw_dev, request_id);
 657                 if (error) {
 658                         printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no);
 659                         tw_dev->state[request_id] = TW_S_COMPLETED;
 660                         tw_state_request_finish(tw_dev, request_id);
 661                 }
 662         } else {
 663                 tw_dev->state[request_id] = TW_S_COMPLETED;
 664                 tw_state_request_finish(tw_dev, request_id);
 665         }
 666
 667         return 0;
 668 } /* End tw_aen_complete() */
 669
 670 /* This function will drain the aen queue after a soft reset */
 671 static int tw_aen_drain_queue(TW_Device_Extension *tw_dev)
 672 {
 673         TW_Command *command_packet;
 674         TW_Param *param;
 675         int request_id = 0;
 676         unsigned long command_que_value;
 677         unsigned long param_value;
 678         TW_Response_Queue response_queue;
 679         unsigned short aen;
 680         unsigned short aen_code;
 681         int finished = 0;
 682         int first_reset = 0;
 683         int queue = 0;
 684         int found = 0, table_max = 0;
 685
 686         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");
 687
 688         if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) {
 689                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count);
 690                 return 1;
 691         }
 692         TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
 693
 694         /* Empty response queue */
 695         tw_empty_response_que(tw_dev);
 696
 697         /* Initialize command packet */
 698         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 699                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
 700                 return 1;
 701         }
 702         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 703         memset(command_packet, 0, sizeof(TW_Sector));
 704         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 705         command_packet->size = 4;
 706         command_packet->request_id = request_id;
 707         command_packet->status = 0;
 708         command_packet->flags = 0;
 709         command_packet->byte6.parameter_count = 1;
 710         command_que_value = tw_dev->command_packet_physical_address[request_id];
 711         if (command_que_value == 0) {
 712                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
 713                 return 1;
 714         }
 715
 716         /* Now setup the param */
 717         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 718                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
 719                 return 1;
 720         }
 721         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 722         memset(param, 0, sizeof(TW_Sector));
 723         param->table_id = 0x401; /* AEN table */
 724         param->parameter_id = 2; /* Unit code */
 725         param->parameter_size_bytes = 2;
 726         param_value = tw_dev->alignment_physical_address[request_id];
 727         if (param_value == 0) {
 728                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
 729                 return 1;
 730         }
 731         command_packet->byte8.param.sgl[0].address = param_value;
 732         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 733
 734         /* Now drain the controller's aen queue */
 735         do {
 736                 /* Post command packet */
 737                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 738
 739                 /* Now poll for completion */
 740                 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
 741                         response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 742                         request_id = TW_RESID_OUT(response_queue.response_id);
 743
 744                         if (request_id != 0) {
 745                                 /* Unexpected request id */
 746                                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
 747                                 return 1;
 748                         }
 749
 750                         if (command_packet->status != 0) {
 751                                 if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) {
 752                                         /* Bad response */
 753                                         tw_decode_sense(tw_dev, request_id, 0);
 754                                         return 1;
 755                                 } else {
 756                                         /* We know this is a 3w-1x00, and doesn't support aen's */
 757                                         return 0;
 758                                 }
 759                         }
 760
 761                         /* Now check the aen */
 762                         aen = *(unsigned short *)(param->data);
 763                         aen_code = (aen & 0x0ff);
 764                         queue = 0;
 765                         switch (aen_code) {
 766                                 case TW_AEN_QUEUE_EMPTY:
 767                                         dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 768                                         if (first_reset != 1) {
 769                                                 return 1;
 770                                         } else {
 771                                                 finished = 1;
 772                                         }
 773                                         break;
 774                                 case TW_AEN_SOFT_RESET:
 775                                         if (first_reset == 0) {
 776                                                 first_reset = 1;
 777                                         } else {
 778                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 779                                                 tw_dev->aen_count++;
 780                                                 queue = 1;
 781                                         }
 782                                         break;
 783                                 default:
 784                                         if (aen == 0x0ff) {
 785                                                 printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n");
 786                                         } else {
 787                                                 table_max = ARRAY_SIZE(tw_aen_string);
 788                                                 if ((aen & 0x0ff) < table_max) {
 789                                                         if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 790                                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8);
 791                                                         } else {
 792                                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 793                                                         }
 794                                                 } else
 795                                                         printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen);
 796                                         }
 797                                         tw_dev->aen_count++;
 798                                         queue = 1;
 799                         }
 800
 801                         /* Now put the aen on the aen_queue */
 802                         if (queue == 1) {
 803                                 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 804                                 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 805                                         tw_dev->aen_tail = TW_Q_START;
 806                                 } else {
 807                                         tw_dev->aen_tail = tw_dev->aen_tail + 1;
 808                                 }
 809                                 if (tw_dev->aen_head == tw_dev->aen_tail) {
 810                                         if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 811                                                 tw_dev->aen_head = TW_Q_START;
 812                                         } else {
 813                                                 tw_dev->aen_head = tw_dev->aen_head + 1;
 814                                         }
 815                                 }
 816                         }
 817                         found = 1;
 818                 }
 819                 if (found == 0) {
 820                         printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
 821                         return 1;
 822                 }
 823         } while (finished == 0);
 824
 825         return 0;
 826 } /* End tw_aen_drain_queue() */
 827
 828 /* This function will allocate memory */
 829 static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
 830 {
 831         int i;
 832         dma_addr_t dma_handle;
 833         unsigned long *cpu_addr = NULL;
 834
 835         dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");
 836
 837         cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev,
 838                         size * TW_Q_LENGTH, &dma_handle, GFP_KERNEL);
 839         if (cpu_addr == NULL) {
 840                 printk(KERN_WARNING "3w-xxxx: dma_alloc_coherent() failed.\n");
 841                 return 1;
 842         }
 843
 844         if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) {
 845                 printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n");
 846                 dma_free_coherent(&tw_dev->tw_pci_dev->dev, size * TW_Q_LENGTH,
 847                                 cpu_addr, dma_handle);
 848                 return 1;
 849         }
 850
 851         memset(cpu_addr, 0, size*TW_Q_LENGTH);
 852
 853         for (i=0;i<TW_Q_LENGTH;i++) {
 854                 switch(which) {
 855                 case 0:
 856                         tw_dev->command_packet_physical_address[i] = dma_handle+(i*size);
 857                         tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 858                         break;
 859                 case 1:
 860                         tw_dev->alignment_physical_address[i] = dma_handle+(i*size);
 861                         tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 862                         break;
 863                 default:
 864                         printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n");
 865                         return 1;
 866                 }
 867         }
 868
 869         return 0;
 870 } /* End tw_allocate_memory() */
 871
 872 /* This function handles ioctl for the character device */
 873 static long tw_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 874 {
 875         int request_id;
 876         dma_addr_t dma_handle;
 877         unsigned short tw_aen_code;
 878         unsigned long flags;
 879         unsigned int data_buffer_length = 0;
 880         unsigned long data_buffer_length_adjusted = 0;
 881         struct inode *inode = file_inode(file);
 882         unsigned long *cpu_addr;
 883         long timeout;
 884         TW_New_Ioctl *tw_ioctl;
 885         TW_Passthru *passthru;
 886         TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)];
 887         int retval = -EFAULT;
 888         void __user *argp = (void __user *)arg;
 889
 890         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n");
 891
 892         mutex_lock(&tw_mutex);
 893         /* Only let one of these through at a time */
 894         if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
 895                 mutex_unlock(&tw_mutex);
 896                 return -EINTR;
 897         }
 898
 899         /* First copy down the buffer length */
 900         if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int)))
 901                 goto out;
 902
 903         /* Check size */
 904         if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) {
 905                 retval = -EINVAL;
 906                 goto out;
 907         }
 908
 909         /* Hardware can only do multiple of 512 byte transfers */
 910         data_buffer_length_adjusted = (data_buffer_length + 511) & ~511;
 911
 912         /* Now allocate ioctl buf memory */
 913         cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL);
 914         if (cpu_addr == NULL) {
 915                 retval = -ENOMEM;
 916                 goto out;
 917         }
 918
 919         tw_ioctl = (TW_New_Ioctl *)cpu_addr;
 920
 921         /* Now copy down the entire ioctl */
 922         if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1))
 923                 goto out2;
 924
 925         passthru = (TW_Passthru *)&tw_ioctl->firmware_command;
 926
 927         /* See which ioctl we are doing */
 928         switch (cmd) {
 929                 case TW_OP_NOP:
 930                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n");
 931                         break;
 932                 case TW_OP_AEN_LISTEN:
 933                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n");
 934                         memset(tw_ioctl->data_buffer, 0, data_buffer_length);
 935
 936                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 937                         if (tw_dev->aen_head == tw_dev->aen_tail) {
 938                                 tw_aen_code = TW_AEN_QUEUE_EMPTY;
 939                         } else {
 940                                 tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head];
 941                                 if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 942                                         tw_dev->aen_head = TW_Q_START;
 943                                 } else {
 944                                         tw_dev->aen_head = tw_dev->aen_head + 1;
 945                                 }
 946                         }
 947                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 948                         memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code));
 949                         break;
 950                 case TW_CMD_PACKET_WITH_DATA:
 951                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n");
 952                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 953
 954                         tw_state_request_start(tw_dev, &request_id);
 955
 956                         /* Flag internal command */
 957                         tw_dev->srb[request_id] = NULL;
 958
 959                         /* Flag chrdev ioctl */
 960                         tw_dev->chrdev_request_id = request_id;
 961
 962                         tw_ioctl->firmware_command.request_id = request_id;
 963
 964                         /* Load the sg list */
 965                         switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) {
 966                         case 2:
 967                                 tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 968                                 tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted;
 969                                 break;
 970                         case 3:
 971                                 tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 972                                 tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted;
 973                                 break;
 974                         case 5:
 975                                 passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 976                                 passthru->sg_list[0].length = data_buffer_length_adjusted;
 977                                 break;
 978                         }
 979
 980                         memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command));
 981
 982                         /* Now post the command packet to the controller */
 983                         tw_post_command_packet(tw_dev, request_id);
 984                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 985
 986                         timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
 987
 988                         /* Now wait for the command to complete */
 989                         timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
 990
 991                         /* We timed out, and didn't get an interrupt */
 992                         if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
 993                                 /* Now we need to reset the board */
 994                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
 995                                 retval = -EIO;
 996                                 if (tw_reset_device_extension(tw_dev)) {
 997                                         printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
 998                                 }
 999                                 goto out2;
1000                         }
1001
1002                         /* Now copy in the command packet response */
1003                         memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command));
1004
1005                         /* Now complete the io */
1006                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
1007                         tw_dev->posted_request_count--;
1008                         tw_dev->state[request_id] = TW_S_COMPLETED;
1009                         tw_state_request_finish(tw_dev, request_id);
1010                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1011                         break;
1012                 default:
1013                         retval = -ENOTTY;
1014                         goto out2;
1015         }
1016
1017         /* Now copy the response to userspace */
1018         if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1))
1019                 goto out2;
1020         retval = 0;
1021 out2:
1022         /* Now free ioctl buf memory */
1023         dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle);
1024 out:
1025         mutex_unlock(&tw_dev->ioctl_lock);
1026         mutex_unlock(&tw_mutex);
1027         return retval;
1028 } /* End tw_chrdev_ioctl() */
1029
1030 /* This function handles open for the character device */
1031 /* NOTE that this function races with remove. */
1032 static int tw_chrdev_open(struct inode *inode, struct file *file)
1033 {
1034         unsigned int minor_number;
1035
1036         dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n");
1037
1038         if (!capable(CAP_SYS_ADMIN))
1039                 return -EACCES;
1040
1041         minor_number = iminor(inode);
1042         if (minor_number >= tw_device_extension_count)
1043                 return -ENODEV;
1044
1045         return 0;
1046 } /* End tw_chrdev_open() */
1047
1048 /* File operations struct for character device */
1049 static const struct file_operations tw_fops = {
1050         .owner          = THIS_MODULE,
1051         .unlocked_ioctl = tw_chrdev_ioctl,
1052         .compat_ioctl   = compat_ptr_ioctl,
1053         .open           = tw_chrdev_open,
1054         .release        = NULL,
1055         .llseek         = noop_llseek,
1056 };
1057
1058 /* This function will free up device extension resources */
1059 static void tw_free_device_extension(TW_Device_Extension *tw_dev)
1060 {
1061         dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");
1062
1063         /* Free command packet and generic buffer memory */
1064         if (tw_dev->command_packet_virtual_address[0])
1065                 dma_free_coherent(&tw_dev->tw_pci_dev->dev,
1066                                 sizeof(TW_Command) * TW_Q_LENGTH,
1067                                 tw_dev->command_packet_virtual_address[0],
1068                                 tw_dev->command_packet_physical_address[0]);
1069
1070         if (tw_dev->alignment_virtual_address[0])
1071                 dma_free_coherent(&tw_dev->tw_pci_dev->dev,
1072                                 sizeof(TW_Sector) * TW_Q_LENGTH,
1073                                 tw_dev->alignment_virtual_address[0],
1074                                 tw_dev->alignment_physical_address[0]);
1075 } /* End tw_free_device_extension() */
1076
1077 /* This function will send an initconnection command to controller */
1078 static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits)
1079 {
1080         unsigned long command_que_value;
1081         TW_Command  *command_packet;
1082         TW_Response_Queue response_queue;
1083         int request_id = 0;
1084
1085         dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");
1086
1087         /* Initialize InitConnection command packet */
1088         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1089                 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
1090                 return 1;
1091         }
1092
1093         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1094         memset(command_packet, 0, sizeof(TW_Sector));
1095         command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION);
1096         command_packet->size = TW_INIT_COMMAND_PACKET_SIZE;
1097         command_packet->request_id = request_id;
1098         command_packet->status = 0x0;
1099         command_packet->flags = 0x0;
1100         command_packet->byte6.message_credits = message_credits;
1101         command_packet->byte8.init_connection.response_queue_pointer = 0x0;
1102         command_que_value = tw_dev->command_packet_physical_address[request_id];
1103
1104         if (command_que_value == 0) {
1105                 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
1106                 return 1;
1107         }
1108
1109         /* Send command packet to the board */
1110         outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1111
1112         /* Poll for completion */
1113         if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1114                 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1115                 request_id = TW_RESID_OUT(response_queue.response_id);
1116
1117                 if (request_id != 0) {
1118                         /* unexpected request id */
1119                         printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
1120                         return 1;
1121                 }
1122                 if (command_packet->status != 0) {
1123                         /* bad response */
1124                         tw_decode_sense(tw_dev, request_id, 0);
1125                         return 1;
1126                 }
1127         }
1128         return 0;
1129 } /* End tw_initconnection() */
1130
1131 /* Set a value in the features table */
1132 static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size,
1133                          unsigned char *val)
1134 {
1135         TW_Param *param;
1136         TW_Command  *command_packet;
1137         TW_Response_Queue response_queue;
1138         int request_id = 0;
1139         unsigned long command_que_value;
1140         unsigned long param_value;
1141
1142         /* Initialize SetParam command packet */
1143         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1144                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n");
1145                 return 1;
1146         }
1147         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1148         memset(command_packet, 0, sizeof(TW_Sector));
1149         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1150
1151         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
1152         param->table_id = 0x404;  /* Features table */
1153         param->parameter_id = parm;
1154         param->parameter_size_bytes = param_size;
1155         memcpy(param->data, val, param_size);
1156
1157         param_value = tw_dev->alignment_physical_address[request_id];
1158         if (param_value == 0) {
1159                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n");
1160                 tw_dev->state[request_id] = TW_S_COMPLETED;
1161                 tw_state_request_finish(tw_dev, request_id);
1162                 tw_dev->srb[request_id]->result = (DID_OK << 16);
1163                 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1164         }
1165         command_packet->byte8.param.sgl[0].address = param_value;
1166         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1167
1168         command_packet->size = 4;
1169         command_packet->request_id = request_id;
1170         command_packet->byte6.parameter_count = 1;
1171
1172         command_que_value = tw_dev->command_packet_physical_address[request_id];
1173         if (command_que_value == 0) {
1174                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n");
1175                 return 1;
1176         }
1177
1178         /* Send command packet to the board */
1179         outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1180
1181         /* Poll for completion */
1182         if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1183                 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1184                 request_id = TW_RESID_OUT(response_queue.response_id);
1185
1186                 if (request_id != 0) {
1187                         /* unexpected request id */
1188                         printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n");
1189                         return 1;
1190                 }
1191                 if (command_packet->status != 0) {
1192                         /* bad response */
1193                         tw_decode_sense(tw_dev, request_id, 0);
1194                         return 1;
1195                 }
1196         }
1197
1198         return 0;
1199 } /* End tw_setfeature() */
1200
1201 /* This function will reset a controller */
1202 static int tw_reset_sequence(TW_Device_Extension *tw_dev)
1203 {
1204         int error = 0;
1205         int tries = 0;
1206         unsigned char c = 1;
1207
1208         /* Reset the board */
1209         while (tries < TW_MAX_RESET_TRIES) {
1210                 TW_SOFT_RESET(tw_dev);
1211
1212                 error = tw_aen_drain_queue(tw_dev);
1213                 if (error) {
1214                         printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no);
1215                         tries++;
1216                         continue;
1217                 }
1218
1219                 /* Check for controller errors */
1220                 if (tw_check_errors(tw_dev)) {
1221                         printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no);
1222                         tries++;
1223                         continue;
1224                 }
1225
1226                 /* Now the controller is in a good state */
1227                 break;
1228         }
1229
1230         if (tries >= TW_MAX_RESET_TRIES) {
1231                 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no);
1232                 return 1;
1233         }
1234
1235         error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS);
1236         if (error) {
1237                 printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no);
1238                 return 1;
1239         }
1240
1241         error = tw_setfeature(tw_dev, 2, 1, &c);
1242         if (error) {
1243                 printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n");
1244         }
1245
1246         return 0;
1247 } /* End tw_reset_sequence() */
1248
1249 /* This function will initialize the fields of a device extension */
1250 static int tw_initialize_device_extension(TW_Device_Extension *tw_dev)
1251 {
1252         int i, error=0;
1253
1254         dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");
1255
1256         /* Initialize command packet buffers */
1257         error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0);
1258         if (error) {
1259                 printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n");
1260                 return 1;
1261         }
1262
1263         /* Initialize generic buffer */
1264         error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1);
1265         if (error) {
1266                 printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n");
1267                 return 1;
1268         }
1269
1270         for (i=0;i<TW_Q_LENGTH;i++) {
1271                 tw_dev->free_queue[i] = i;
1272                 tw_dev->state[i] = TW_S_INITIAL;
1273         }
1274
1275         tw_dev->pending_head = TW_Q_START;
1276         tw_dev->pending_tail = TW_Q_START;
1277         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1278
1279         mutex_init(&tw_dev->ioctl_lock);
1280         init_waitqueue_head(&tw_dev->ioctl_wqueue);
1281
1282         return 0;
1283 } /* End tw_initialize_device_extension() */
1284
1285 /* This function will reset a device extension */
1286 static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
1287 {
1288         int i = 0;
1289         struct scsi_cmnd *srb;
1290         unsigned long flags = 0;
1291
1292         dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");
1293
1294         set_bit(TW_IN_RESET, &tw_dev->flags);
1295         TW_DISABLE_INTERRUPTS(tw_dev);
1296         TW_MASK_COMMAND_INTERRUPT(tw_dev);
1297         spin_lock_irqsave(tw_dev->host->host_lock, flags);
1298
1299         /* Abort all requests that are in progress */
1300         for (i=0;i<TW_Q_LENGTH;i++) {
1301                 if ((tw_dev->state[i] != TW_S_FINISHED) &&
1302                     (tw_dev->state[i] != TW_S_INITIAL) &&
1303                     (tw_dev->state[i] != TW_S_COMPLETED)) {
1304                         srb = tw_dev->srb[i];
1305                         if (srb != NULL) {
1306                                 srb->result = (DID_RESET << 16);
1307                                 scsi_dma_unmap(srb);
1308                                 srb->scsi_done(srb);
1309                         }
1310                 }
1311         }
1312
1313         /* Reset queues and counts */
1314         for (i=0;i<TW_Q_LENGTH;i++) {
1315                 tw_dev->free_queue[i] = i;
1316                 tw_dev->state[i] = TW_S_INITIAL;
1317         }
1318         tw_dev->free_head = TW_Q_START;
1319         tw_dev->free_tail = TW_Q_START;
1320         tw_dev->posted_request_count = 0;
1321         tw_dev->pending_request_count = 0;
1322         tw_dev->pending_head = TW_Q_START;
1323         tw_dev->pending_tail = TW_Q_START;
1324         tw_dev->reset_print = 0;
1325
1326         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1327
1328         if (tw_reset_sequence(tw_dev)) {
1329                 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
1330                 return 1;
1331         }
1332
1333         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
1334         clear_bit(TW_IN_RESET, &tw_dev->flags);
1335         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1336
1337         return 0;
1338 } /* End tw_reset_device_extension() */
1339
1340 /* This funciton returns unit geometry in cylinders/heads/sectors */
1341 static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1342                              sector_t capacity, int geom[])
1343 {
1344         int heads, sectors, cylinders;
1345
1346         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");
1347
1348         heads = 64;
1349         sectors = 32;
1350         cylinders = sector_div(capacity, heads * sectors);
1351
1352         if (capacity >= 0x200000) {
1353                 heads = 255;
1354                 sectors = 63;
1355                 cylinders = sector_div(capacity, heads * sectors);
1356         }
1357
1358         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);
1359         geom[0] = heads;
1360         geom[1] = sectors;
1361         geom[2] = cylinders;
1362
1363         return 0;
1364 } /* End tw_scsi_biosparam() */
1365
1366 /* This is the new scsi eh reset function */
1367 static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)
1368 {
1369         TW_Device_Extension *tw_dev=NULL;
1370         int retval = FAILED;
1371
1372         tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1373
1374         tw_dev->num_resets++;
1375
1376         sdev_printk(KERN_WARNING, SCpnt->device,
1377                 "WARNING: Command (0x%x) timed out, resetting card.\n",
1378                 SCpnt->cmnd[0]);
1379
1380         /* Make sure we are not issuing an ioctl or resetting from ioctl */
1381         mutex_lock(&tw_dev->ioctl_lock);
1382
1383         /* Now reset the card and some of the device extension data */
1384         if (tw_reset_device_extension(tw_dev)) {
1385                 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
1386                 goto out;
1387         }
1388
1389         retval = SUCCESS;
1390 out:
1391         mutex_unlock(&tw_dev->ioctl_lock);
1392         return retval;
1393 } /* End tw_scsi_eh_reset() */
1394
1395 /* This function handles scsi inquiry commands */
1396 static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id)
1397 {
1398         TW_Param *param;
1399         TW_Command *command_packet;
1400         unsigned long command_que_value;
1401         unsigned long param_value;
1402
1403         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");
1404
1405         /* Initialize command packet */
1406         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1407         if (command_packet == NULL) {
1408                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
1409                 return 1;
1410         }
1411         memset(command_packet, 0, sizeof(TW_Sector));
1412         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1413         command_packet->size = 4;
1414         command_packet->request_id = request_id;
1415         command_packet->status = 0;
1416         command_packet->flags = 0;
1417         command_packet->byte6.parameter_count = 1;
1418
1419         /* Now setup the param */
1420         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1421                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
1422                 return 1;
1423         }
1424         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1425         memset(param, 0, sizeof(TW_Sector));
1426         param->table_id = 3;     /* unit summary table */
1427         param->parameter_id = 3; /* unitsstatus parameter */
1428         param->parameter_size_bytes = TW_MAX_UNITS;
1429         param_value = tw_dev->alignment_physical_address[request_id];
1430         if (param_value == 0) {
1431                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
1432                 return 1;
1433         }
1434
1435         command_packet->byte8.param.sgl[0].address = param_value;
1436         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1437         command_que_value = tw_dev->command_packet_physical_address[request_id];
1438         if (command_que_value == 0) {
1439                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
1440                 return 1;
1441         }
1442
1443         /* Now try to post the command packet */
1444         tw_post_command_packet(tw_dev, request_id);
1445
1446         return 0;
1447 } /* End tw_scsiop_inquiry() */
1448
1449 static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
1450                                  void *data, unsigned int len)
1451 {
1452         scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len);
1453 }
1454
1455 /* This function is called by the isr to complete an inquiry command */
1456 static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id)
1457 {
1458         unsigned char *is_unit_present;
1459         unsigned char request_buffer[36];
1460         TW_Param *param;
1461
1462         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");
1463
1464         memset(request_buffer, 0, sizeof(request_buffer));
1465         request_buffer[0] = TYPE_DISK; /* Peripheral device type */
1466         request_buffer[1] = 0;         /* Device type modifier */
1467         request_buffer[2] = 0;         /* No ansi/iso compliance */
1468         request_buffer[4] = 31;        /* Additional length */
1469         memcpy(&request_buffer[8], "3ware   ", 8);       /* Vendor ID */
1470         sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id);
1471         memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3);
1472         tw_transfer_internal(tw_dev, request_id, request_buffer,
1473                              sizeof(request_buffer));
1474
1475         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1476         if (param == NULL) {
1477                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
1478                 return 1;
1479         }
1480         is_unit_present = &(param->data[0]);
1481
1482         if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1483                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1484         } else {
1485                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1486                 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1487                 return TW_ISR_DONT_RESULT;
1488         }
1489
1490         return 0;
1491 } /* End tw_scsiop_inquiry_complete() */
1492
1493 /* This function handles scsi mode_sense commands */
1494 static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id)
1495 {
1496         TW_Param *param;
1497         TW_Command *command_packet;
1498         unsigned long command_que_value;
1499         unsigned long param_value;
1500
1501         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n");
1502
1503         /* Only page control = 0, page code = 0x8 (cache page) supported */
1504         if (tw_dev->srb[request_id]->cmnd[2] != 0x8) {
1505                 tw_dev->state[request_id] = TW_S_COMPLETED;
1506                 tw_state_request_finish(tw_dev, request_id);
1507                 tw_dev->srb[request_id]->result = (DID_OK << 16);
1508                 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1509                 return 0;
1510         }
1511
1512         /* Now read firmware cache setting for this unit */
1513         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1514         if (command_packet == NULL) {
1515                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n");
1516                 return 1;
1517         }
1518
1519         /* Setup the command packet */
1520         memset(command_packet, 0, sizeof(TW_Sector));
1521         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1522         command_packet->size = 4;
1523         command_packet->request_id = request_id;
1524         command_packet->status = 0;
1525         command_packet->flags = 0;
1526         command_packet->byte6.parameter_count = 1;
1527
1528         /* Setup the param */
1529         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1530                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n");
1531                 return 1;
1532         }
1533
1534         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1535         memset(param, 0, sizeof(TW_Sector));
1536         param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id;
1537         param->parameter_id = 7; /* unit flags */
1538         param->parameter_size_bytes = 1;
1539         param_value = tw_dev->alignment_physical_address[request_id];
1540         if (param_value == 0) {
1541                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n");
1542                 return 1;
1543         }
1544
1545         command_packet->byte8.param.sgl[0].address = param_value;
1546         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1547         command_que_value = tw_dev->command_packet_physical_address[request_id];
1548         if (command_que_value == 0) {
1549                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n");
1550                 return 1;
1551         }
1552
1553         /* Now try to post the command packet */
1554         tw_post_command_packet(tw_dev, request_id);
1555
1556         return 0;
1557 } /* End tw_scsiop_mode_sense() */
1558
1559 /* This function is called by the isr to complete a mode sense command */
1560 static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id)
1561 {
1562         TW_Param *param;
1563         unsigned char *flags;
1564         unsigned char request_buffer[8];
1565
1566         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n");
1567
1568         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1569         if (param == NULL) {
1570                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n");
1571                 return 1;
1572         }
1573         flags = (char *)&(param->data[0]);
1574         memset(request_buffer, 0, sizeof(request_buffer));
1575
1576         request_buffer[0] = 0xf;        /* mode data length */
1577         request_buffer[1] = 0;          /* default medium type */
1578         request_buffer[2] = 0x10;       /* dpo/fua support on */
1579         request_buffer[3] = 0;          /* no block descriptors */
1580         request_buffer[4] = 0x8;        /* caching page */
1581         request_buffer[5] = 0xa;        /* page length */
1582         if (*flags & 0x1)
1583                 request_buffer[6] = 0x5;        /* WCE on, RCD on */
1584         else
1585                 request_buffer[6] = 0x1;        /* WCE off, RCD on */
1586         tw_transfer_internal(tw_dev, request_id, request_buffer,
1587                              sizeof(request_buffer));
1588
1589         return 0;
1590 } /* End tw_scsiop_mode_sense_complete() */
1591
1592 /* This function handles scsi read_capacity commands */
1593 static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id)
1594 {
1595         TW_Param *param;
1596         TW_Command *command_packet;
1597         unsigned long command_que_value;
1598         unsigned long param_value;
1599
1600         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");
1601
1602         /* Initialize command packet */
1603         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1604
1605         if (command_packet == NULL) {
1606                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");
1607                 return 1;
1608         }
1609         memset(command_packet, 0, sizeof(TW_Sector));
1610         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1611         command_packet->size = 4;
1612         command_packet->request_id = request_id;
1613         command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1614         command_packet->status = 0;
1615         command_packet->flags = 0;
1616         command_packet->byte6.block_count = 1;
1617
1618         /* Now setup the param */
1619         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1620                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");
1621                 return 1;
1622         }
1623         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1624         memset(param, 0, sizeof(TW_Sector));
1625         param->table_id = TW_UNIT_INFORMATION_TABLE_BASE +
1626                 tw_dev->srb[request_id]->device->id;
1627         param->parameter_id = 4;        /* unitcapacity parameter */
1628         param->parameter_size_bytes = 4;
1629         param_value = tw_dev->alignment_physical_address[request_id];
1630         if (param_value == 0) {
1631                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");
1632                 return 1;
1633         }
1634
1635         command_packet->byte8.param.sgl[0].address = param_value;
1636         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1637         command_que_value = tw_dev->command_packet_physical_address[request_id];
1638         if (command_que_value == 0) {
1639                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");
1640                 return 1;
1641         }
1642
1643         /* Now try to post the command to the board */
1644         tw_post_command_packet(tw_dev, request_id);
1645
1646         return 0;
1647 } /* End tw_scsiop_read_capacity() */
1648
1649 /* This function is called by the isr to complete a readcapacity command */
1650 static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id)
1651 {
1652         unsigned char *param_data;
1653         u32 capacity;
1654         char buff[8];
1655         TW_Param *param;
1656
1657         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");
1658
1659         memset(buff, 0, sizeof(buff));
1660         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1661         if (param == NULL) {
1662                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
1663                 return 1;
1664         }
1665         param_data = &(param->data[0]);
1666
1667         capacity = (param_data[3] << 24) | (param_data[2] << 16) |
1668                    (param_data[1] << 8) | param_data[0];
1669
1670         /* Subtract one sector to fix get last sector ioctl */
1671         capacity -= 1;
1672
1673         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);
1674
1675         /* Number of LBA's */
1676         buff[0] = (capacity >> 24);
1677         buff[1] = (capacity >> 16) & 0xff;
1678         buff[2] = (capacity >> 8) & 0xff;
1679         buff[3] = capacity & 0xff;
1680
1681         /* Block size in bytes (512) */
1682         buff[4] = (TW_BLOCK_SIZE >> 24);
1683         buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff;
1684         buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff;
1685         buff[7] = TW_BLOCK_SIZE & 0xff;
1686
1687         tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff));
1688
1689         return 0;
1690 } /* End tw_scsiop_read_capacity_complete() */
1691
1692 /* This function handles scsi read or write commands */
1693 static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
1694 {
1695         TW_Command *command_packet;
1696         unsigned long command_que_value;
1697         u32 lba = 0x0, num_sectors = 0x0;
1698         int i, use_sg;
1699         struct scsi_cmnd *srb;
1700         struct scatterlist *sglist, *sg;
1701
1702         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
1703
1704         srb = tw_dev->srb[request_id];
1705
1706         sglist = scsi_sglist(srb);
1707         if (!sglist) {
1708                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
1709                 return 1;
1710         }
1711
1712         /* Initialize command packet */
1713         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1714         if (command_packet == NULL) {
1715                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");
1716                 return 1;
1717         }
1718
1719         if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) {
1720                 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ);
1721         } else {
1722                 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE);
1723         }
1724
1725         command_packet->size = 3;
1726         command_packet->request_id = request_id;
1727         command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id);
1728         command_packet->status = 0;
1729         command_packet->flags = 0;
1730
1731         if (srb->cmnd[0] == WRITE_10) {
1732                 if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10))
1733                         command_packet->flags = 1;
1734         }
1735
1736         if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) {
1737                 lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3];
1738                 num_sectors = (u32)srb->cmnd[4];
1739         } else {
1740                 lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5];
1741                 num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
1742         }
1743
1744         /* Update sector statistic */
1745         tw_dev->sector_count = num_sectors;
1746         if (tw_dev->sector_count > tw_dev->max_sector_count)
1747                 tw_dev->max_sector_count = tw_dev->sector_count;
1748
1749         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);
1750         command_packet->byte8.io.lba = lba;
1751         command_packet->byte6.block_count = num_sectors;
1752
1753         use_sg = scsi_dma_map(srb);
1754         if (use_sg <= 0)
1755                 return 1;
1756
1757         scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
1758                 command_packet->byte8.io.sgl[i].address = sg_dma_address(sg);
1759                 command_packet->byte8.io.sgl[i].length = sg_dma_len(sg);
1760                 command_packet->size+=2;
1761         }
1762
1763         /* Update SG statistics */
1764         tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
1765         if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
1766                 tw_dev->max_sgl_entries = tw_dev->sgl_entries;
1767
1768         command_que_value = tw_dev->command_packet_physical_address[request_id];
1769         if (command_que_value == 0) {
1770                 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n");
1771                 return 1;
1772         }
1773
1774         /* Now try to post the command to the board */
1775         tw_post_command_packet(tw_dev, request_id);
1776
1777         return 0;
1778 } /* End tw_scsiop_read_write() */
1779
1780 /* This function will handle the request sense scsi command */
1781 static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id)
1782 {
1783         char request_buffer[18];
1784
1785         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");
1786
1787         memset(request_buffer, 0, sizeof(request_buffer));
1788         request_buffer[0] = 0x70; /* Immediate fixed format */
1789         request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */
1790         /* leave all other fields zero, giving effectively NO_SENSE return */
1791         tw_transfer_internal(tw_dev, request_id, request_buffer,
1792                              sizeof(request_buffer));
1793
1794         tw_dev->state[request_id] = TW_S_COMPLETED;
1795         tw_state_request_finish(tw_dev, request_id);
1796
1797         /* If we got a request_sense, we probably want a reset, return error */
1798         tw_dev->srb[request_id]->result = (DID_ERROR << 16);
1799         tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1800
1801         return 0;
1802 } /* End tw_scsiop_request_sense() */
1803
1804 /* This function will handle synchronize cache scsi command */
1805 static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id)
1806 {
1807         TW_Command *command_packet;
1808         unsigned long command_que_value;
1809
1810         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n");
1811
1812         /* Send firmware flush command for this unit */
1813         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1814         if (command_packet == NULL) {
1815                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n");
1816                 return 1;
1817         }
1818
1819         /* Setup the command packet */
1820         memset(command_packet, 0, sizeof(TW_Sector));
1821         command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE);
1822         command_packet->size = 2;
1823         command_packet->request_id = request_id;
1824         command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1825         command_packet->status = 0;
1826         command_packet->flags = 0;
1827         command_packet->byte6.parameter_count = 1;
1828         command_que_value = tw_dev->command_packet_physical_address[request_id];
1829         if (command_que_value == 0) {
1830                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n");
1831                 return 1;
1832         }
1833
1834         /* Now try to post the command packet */
1835         tw_post_command_packet(tw_dev, request_id);
1836
1837         return 0;
1838 } /* End tw_scsiop_synchronize_cache() */
1839
1840 /* This function will handle test unit ready scsi command */
1841 static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id)
1842 {
1843         TW_Param *param;
1844         TW_Command *command_packet;
1845         unsigned long command_que_value;
1846         unsigned long param_value;
1847
1848         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");
1849
1850         /* Initialize command packet */
1851         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1852         if (command_packet == NULL) {
1853                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n");
1854                 return 1;
1855         }
1856         memset(command_packet, 0, sizeof(TW_Sector));
1857         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1858         command_packet->size = 4;
1859         command_packet->request_id = request_id;
1860         command_packet->status = 0;
1861         command_packet->flags = 0;
1862         command_packet->byte6.parameter_count = 1;
1863
1864         /* Now setup the param */
1865         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1866                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n");
1867                 return 1;
1868         }
1869         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1870         memset(param, 0, sizeof(TW_Sector));
1871         param->table_id = 3;     /* unit summary table */
1872         param->parameter_id = 3; /* unitsstatus parameter */
1873         param->parameter_size_bytes = TW_MAX_UNITS;
1874         param_value = tw_dev->alignment_physical_address[request_id];
1875         if (param_value == 0) {
1876                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n");
1877                 return 1;
1878         }
1879
1880         command_packet->byte8.param.sgl[0].address = param_value;
1881         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1882         command_que_value = tw_dev->command_packet_physical_address[request_id];
1883         if (command_que_value == 0) {
1884                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n");
1885                 return 1;
1886         }
1887
1888         /* Now try to post the command packet */
1889         tw_post_command_packet(tw_dev, request_id);
1890
1891         return 0;
1892 } /* End tw_scsiop_test_unit_ready() */
1893
1894 /* This function is called by the isr to complete a testunitready command */
1895 static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id)
1896 {
1897         unsigned char *is_unit_present;
1898         TW_Param *param;
1899
1900         dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n");
1901
1902         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1903         if (param == NULL) {
1904                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n");
1905                 return 1;
1906         }
1907         is_unit_present = &(param->data[0]);
1908
1909         if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1910                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1911         } else {
1912                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1913                 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1914                 return TW_ISR_DONT_RESULT;
1915         }
1916
1917         return 0;
1918 } /* End tw_scsiop_test_unit_ready_complete() */
1919
1920 /* This is the main scsi queue function to handle scsi opcodes */
1921 static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
1922 {
1923         unsigned char *command = SCpnt->cmnd;
1924         int request_id = 0;
1925         int retval = 1;
1926         TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1927
1928         /* If we are resetting due to timed out ioctl, report as busy */
1929         if (test_bit(TW_IN_RESET, &tw_dev->flags))
1930                 return SCSI_MLQUEUE_HOST_BUSY;
1931
1932         /* Save done function into struct scsi_cmnd */
1933         SCpnt->scsi_done = done;
1934
1935         /* Queue the command and get a request id */
1936         tw_state_request_start(tw_dev, &request_id);
1937
1938         /* Save the scsi command for use by the ISR */
1939         tw_dev->srb[request_id] = SCpnt;
1940
1941         switch (*command) {
1942         case READ_10:
1943         case READ_6:
1944         case WRITE_10:
1945         case WRITE_6:
1946                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n");
1947                 retval = tw_scsiop_read_write(tw_dev, request_id);
1948                 break;
1949         case TEST_UNIT_READY:
1950                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");
1951                 retval = tw_scsiop_test_unit_ready(tw_dev, request_id);
1952                 break;
1953         case INQUIRY:
1954                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");
1955                 retval = tw_scsiop_inquiry(tw_dev, request_id);
1956                 break;
1957         case READ_CAPACITY:
1958                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");
1959                 retval = tw_scsiop_read_capacity(tw_dev, request_id);
1960                 break;
1961         case REQUEST_SENSE:
1962                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n");
1963                 retval = tw_scsiop_request_sense(tw_dev, request_id);
1964                 break;
1965         case MODE_SENSE:
1966                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n");
1967                 retval = tw_scsiop_mode_sense(tw_dev, request_id);
1968                 break;
1969         case SYNCHRONIZE_CACHE:
1970                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n");
1971                 retval = tw_scsiop_synchronize_cache(tw_dev, request_id);
1972                 break;
1973         case TW_IOCTL:
1974                 printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n");
1975                 break;
1976         default:
1977                 printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);
1978                 tw_dev->state[request_id] = TW_S_COMPLETED;
1979                 tw_state_request_finish(tw_dev, request_id);
1980                 scsi_build_sense(SCpnt, 1, ILLEGAL_REQUEST, 0x20, 0);
1981                 done(SCpnt);
1982                 retval = 0;
1983         }
1984         if (retval) {
1985                 tw_dev->state[request_id] = TW_S_COMPLETED;
1986                 tw_state_request_finish(tw_dev, request_id);
1987                 SCpnt->result = (DID_ERROR << 16);
1988                 done(SCpnt);
1989                 retval = 0;
1990         }
1991         return retval;
1992 } /* End tw_scsi_queue() */
1993
1994 static DEF_SCSI_QCMD(tw_scsi_queue)
1995
1996 /* This function is the interrupt service routine */
1997 static irqreturn_t tw_interrupt(int irq, void *dev_instance)
1998 {
1999         int request_id;
2000         u32 status_reg_value;
2001         TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
2002         TW_Response_Queue response_que;
2003         int error = 0, retval = 0;
2004         TW_Command *command_packet;
2005         int handled = 0;
2006
2007         /* Get the host lock for io completions */
2008         spin_lock(tw_dev->host->host_lock);
2009
2010         /* Read the registers */
2011         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2012
2013         /* Check if this is our interrupt, otherwise bail */
2014         if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT))
2015                 goto tw_interrupt_bail;
2016
2017         handled = 1;
2018
2019         /* If we are resetting, bail */
2020         if (test_bit(TW_IN_RESET, &tw_dev->flags))
2021                 goto tw_interrupt_bail;
2022
2023         /* Check controller for errors */
2024         if (tw_check_bits(status_reg_value)) {
2025                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2026                 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2027                         TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2028                         goto tw_interrupt_bail;
2029                 }
2030         }
2031
2032         /* Handle host interrupt */
2033         if (status_reg_value & TW_STATUS_HOST_INTERRUPT) {
2034                 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");
2035                 TW_CLEAR_HOST_INTERRUPT(tw_dev);
2036         }
2037
2038         /* Handle attention interrupt */
2039         if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) {
2040                 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");
2041                 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
2042                 tw_state_request_start(tw_dev, &request_id);
2043                 error = tw_aen_read_queue(tw_dev, request_id);
2044                 if (error) {
2045                         printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no);
2046                         tw_dev->state[request_id] = TW_S_COMPLETED;
2047                         tw_state_request_finish(tw_dev, request_id);
2048                 }
2049         }
2050
2051         /* Handle command interrupt */
2052         if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) {
2053                 /* Drain as many pending commands as we can */
2054                 while (tw_dev->pending_request_count > 0) {
2055                         request_id = tw_dev->pending_queue[tw_dev->pending_head];
2056                         if (tw_dev->state[request_id] != TW_S_PENDING) {
2057                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no);
2058                                 break;
2059                         }
2060                         if (tw_post_command_packet(tw_dev, request_id)==0) {
2061                                 if (tw_dev->pending_head == TW_Q_LENGTH-1) {
2062                                         tw_dev->pending_head = TW_Q_START;
2063                                 } else {
2064                                         tw_dev->pending_head = tw_dev->pending_head + 1;
2065                                 }
2066                                 tw_dev->pending_request_count--;
2067                         } else {
2068                                 /* If we get here, we will continue re-posting on the next command interrupt */
2069                                 break;
2070                         }
2071                 }
2072                 /* If there are no more pending requests, we mask command interrupt */
2073                 if (tw_dev->pending_request_count == 0)
2074                         TW_MASK_COMMAND_INTERRUPT(tw_dev);
2075         }
2076
2077         /* Handle response interrupt */
2078         if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) {
2079                 /* Drain the response queue from the board */
2080                 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
2081                         /* Read response queue register */
2082                         response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
2083                         request_id = TW_RESID_OUT(response_que.response_id);
2084                         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
2085                         error = 0;
2086
2087                         /* Check for bad response */
2088                         if (command_packet->status != 0) {
2089                                 /* If internal command, don't error, don't fill sense */
2090                                 if (tw_dev->srb[request_id] == NULL) {
2091                                         tw_decode_sense(tw_dev, request_id, 0);
2092                                 } else {
2093                                         error = tw_decode_sense(tw_dev, request_id, 1);
2094                                 }
2095                         }
2096
2097                         /* Check for correct state */
2098                         if (tw_dev->state[request_id] != TW_S_POSTED) {
2099                                 if (tw_dev->srb[request_id] != NULL) {
2100                                         printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no);
2101                                         error = 1;
2102                                 }
2103                         }
2104
2105                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);
2106
2107                         /* Check for internal command completion */
2108                         if (tw_dev->srb[request_id] == NULL) {
2109                                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n");
2110                                 /* Check for chrdev ioctl completion */
2111                                 if (request_id != tw_dev->chrdev_request_id) {
2112                                         retval = tw_aen_complete(tw_dev, request_id);
2113                                         if (retval) {
2114                                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no);
2115                                         }
2116                                 } else {
2117                                         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
2118                                         wake_up(&tw_dev->ioctl_wqueue);
2119                                 }
2120                         } else {
2121                                 switch (tw_dev->srb[request_id]->cmnd[0]) {
2122                                 case READ_10:
2123                                 case READ_6:
2124                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n");
2125                                         break;
2126                                 case WRITE_10:
2127                                 case WRITE_6:
2128                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n");
2129                                         break;
2130                                 case TEST_UNIT_READY:
2131                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n");
2132                                         error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id);
2133                                         break;
2134                                 case INQUIRY:
2135                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");
2136                                         error = tw_scsiop_inquiry_complete(tw_dev, request_id);
2137                                         break;
2138                                 case READ_CAPACITY:
2139                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");
2140                                         error = tw_scsiop_read_capacity_complete(tw_dev, request_id);
2141                                         break;
2142                                 case MODE_SENSE:
2143                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n");
2144                                         error = tw_scsiop_mode_sense_complete(tw_dev, request_id);
2145                                         break;
2146                                 case SYNCHRONIZE_CACHE:
2147                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n");
2148                                         break;
2149                                 default:
2150                                         printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n");
2151                                         error = 1;
2152                                 }
2153
2154                                 /* If no error command was a success */
2155                                 if (error == 0) {
2156                                         tw_dev->srb[request_id]->result = (DID_OK << 16);
2157                                 }
2158
2159                                 /* If error, command failed */
2160                                 if (error == 1) {
2161                                         /* Ask for a host reset */
2162                                         tw_dev->srb[request_id]->result = (DID_OK << 16) | SAM_STAT_CHECK_CONDITION;
2163                                 }
2164
2165                                 /* Now complete the io */
2166                                 if ((error != TW_ISR_DONT_COMPLETE)) {
2167                                         scsi_dma_unmap(tw_dev->srb[request_id]);
2168                                         tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
2169                                         tw_dev->state[request_id] = TW_S_COMPLETED;
2170                                         tw_state_request_finish(tw_dev, request_id);
2171                                         tw_dev->posted_request_count--;
2172                                 }
2173                         }
2174
2175                         /* Check for valid status after each drain */
2176                         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2177                         if (tw_check_bits(status_reg_value)) {
2178                                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2179                                 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2180                                         TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2181                                         goto tw_interrupt_bail;
2182                                 }
2183                         }
2184                 }
2185         }
2186
2187 tw_interrupt_bail:
2188         spin_unlock(tw_dev->host->host_lock);
2189         return IRQ_RETVAL(handled);
2190 } /* End tw_interrupt() */
2191
2192 /* This function tells the controller to shut down */
2193 static void __tw_shutdown(TW_Device_Extension *tw_dev)
2194 {
2195         /* Disable interrupts */
2196         TW_DISABLE_INTERRUPTS(tw_dev);
2197
2198         /* Free up the IRQ */
2199         free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
2200
2201         printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
2202
2203         /* Tell the card we are shutting down */
2204         if (tw_initconnection(tw_dev, 1)) {
2205                 printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n");
2206         } else {
2207                 printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n");
2208         }
2209
2210         /* Clear all interrupts just before exit */
2211         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2212 } /* End __tw_shutdown() */
2213
2214 /* Wrapper for __tw_shutdown */
2215 static void tw_shutdown(struct pci_dev *pdev)
2216 {
2217         struct Scsi_Host *host = pci_get_drvdata(pdev);
2218         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2219
2220         __tw_shutdown(tw_dev);
2221 } /* End tw_shutdown() */
2222
2223 /* This function gets called when a disk is coming online */
2224 static int tw_slave_configure(struct scsi_device *sdev)
2225 {
2226         /* Force 60 second timeout */
2227         blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
2228
2229         return 0;
2230 } /* End tw_slave_configure() */
2231
2232 static struct scsi_host_template driver_template = {
2233         .module                 = THIS_MODULE,
2234         .name                   = "3ware Storage Controller",
2235         .queuecommand           = tw_scsi_queue,
2236         .eh_host_reset_handler  = tw_scsi_eh_reset,
2237         .bios_param             = tw_scsi_biosparam,
2238         .change_queue_depth     = scsi_change_queue_depth,
2239         .can_queue              = TW_Q_LENGTH-2,
2240         .slave_configure        = tw_slave_configure,
2241         .this_id                = -1,
2242         .sg_tablesize           = TW_MAX_SGL_LENGTH,
2243         .max_sectors            = TW_MAX_SECTORS,
2244         .cmd_per_lun            = TW_MAX_CMDS_PER_LUN,
2245         .shost_attrs            = tw_host_attrs,
2246         .emulated               = 1,
2247         .no_write_same          = 1,
2248 };
2249
2250 /* This function will probe and initialize a card */
2251 static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
2252 {
2253         struct Scsi_Host *host = NULL;
2254         TW_Device_Extension *tw_dev;
2255         int retval = -ENODEV;
2256
2257         retval = pci_enable_device(pdev);
2258         if (retval) {
2259                 printk(KERN_WARNING "3w-xxxx: Failed to enable pci device.");
2260                 goto out_disable_device;
2261         }
2262
2263         pci_set_master(pdev);
2264
2265         retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
2266         if (retval) {
2267                 printk(KERN_WARNING "3w-xxxx: Failed to set dma mask.");
2268                 goto out_disable_device;
2269         }
2270
2271         host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
2272         if (!host) {
2273                 printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension.");
2274                 retval = -ENOMEM;
2275                 goto out_disable_device;
2276         }
2277         tw_dev = (TW_Device_Extension *)host->hostdata;
2278
2279         /* Save values to device extension */
2280         tw_dev->host = host;
2281         tw_dev->tw_pci_dev = pdev;
2282
2283         if (tw_initialize_device_extension(tw_dev)) {
2284                 printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
2285                 retval = -ENOMEM;
2286                 goto out_free_device_extension;
2287         }
2288
2289         /* Request IO regions */
2290         retval = pci_request_regions(pdev, "3w-xxxx");
2291         if (retval) {
2292                 printk(KERN_WARNING "3w-xxxx: Failed to get mem region.");
2293                 goto out_free_device_extension;
2294         }
2295
2296         /* Save base address */
2297         tw_dev->base_addr = pci_resource_start(pdev, 0);
2298         if (!tw_dev->base_addr) {
2299                 printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
2300                 retval = -ENOMEM;
2301                 goto out_release_mem_region;
2302         }
2303
2304         /* Disable interrupts on the card */
2305         TW_DISABLE_INTERRUPTS(tw_dev);
2306
2307         /* Initialize the card */
2308         if (tw_reset_sequence(tw_dev))
2309                 goto out_release_mem_region;
2310
2311         /* Set host specific parameters */
2312         host->max_id = TW_MAX_UNITS;
2313         host->max_cmd_len = TW_MAX_CDB_LEN;
2314
2315         /* Luns and channels aren't supported by adapter */
2316         host->max_lun = 0;
2317         host->max_channel = 0;
2318
2319         /* Register the card with the kernel SCSI layer */
2320         retval = scsi_add_host(host, &pdev->dev);
2321         if (retval) {
2322                 printk(KERN_WARNING "3w-xxxx: scsi add host failed");
2323                 goto out_release_mem_region;
2324         }
2325
2326         pci_set_drvdata(pdev, host);
2327
2328         printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
2329
2330         /* Now setup the interrupt handler */
2331         retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
2332         if (retval) {
2333                 printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
2334                 goto out_remove_host;
2335         }
2336
2337         tw_device_extension_list[tw_device_extension_count] = tw_dev;
2338         tw_device_extension_count++;
2339
2340         /* Re-enable interrupts on the card */
2341         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2342
2343         /* Finally, scan the host */
2344         scsi_scan_host(host);
2345
2346         if (twe_major == -1) {
2347                 if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0)
2348                         printk(KERN_WARNING "3w-xxxx: Failed to register character device.");
2349         }
2350         return 0;
2351
2352 out_remove_host:
2353         scsi_remove_host(host);
2354 out_release_mem_region:
2355         pci_release_regions(pdev);
2356 out_free_device_extension:
2357         tw_free_device_extension(tw_dev);
2358         scsi_host_put(host);
2359 out_disable_device:
2360         pci_disable_device(pdev);
2361
2362         return retval;
2363 } /* End tw_probe() */
2364
2365 /* This function is called to remove a device */
2366 static void tw_remove(struct pci_dev *pdev)
2367 {
2368         struct Scsi_Host *host = pci_get_drvdata(pdev);
2369         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2370
2371         scsi_remove_host(tw_dev->host);
2372
2373         /* Unregister character device */
2374         if (twe_major >= 0) {
2375                 unregister_chrdev(twe_major, "twe");
2376                 twe_major = -1;
2377         }
2378
2379         /* Shutdown the card */
2380         __tw_shutdown(tw_dev);
2381
2382         /* Free up the mem region */
2383         pci_release_regions(pdev);
2384
2385         /* Free up device extension resources */
2386         tw_free_device_extension(tw_dev);
2387
2388         scsi_host_put(tw_dev->host);
2389         pci_disable_device(pdev);
2390         tw_device_extension_count--;
2391 } /* End tw_remove() */
2392
2393 /* PCI Devices supported by this driver */
2394 static struct pci_device_id tw_pci_tbl[] = {
2395         { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000,
2396           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2397         { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000,
2398           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2399         { }
2400 };
2401 MODULE_DEVICE_TABLE(pci, tw_pci_tbl);
2402
2403 /* pci_driver initializer */
2404 static struct pci_driver tw_driver = {
2405         .name           = "3w-xxxx",
2406         .id_table       = tw_pci_tbl,
2407         .probe          = tw_probe,
2408         .remove         = tw_remove,
2409         .shutdown       = tw_shutdown,
2410 };
2411
2412 /* This function is called on driver initialization */
2413 static int __init tw_init(void)
2414 {
2415         printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
2416
2417         return pci_register_driver(&tw_driver);
2418 } /* End tw_init() */
2419
2420 /* This function is called on driver exit */
2421 static void __exit tw_exit(void)
2422 {
2423         pci_unregister_driver(&tw_driver);
2424 } /* End tw_exit() */
2425
2426 module_init(tw_init);
2427 module_exit(tw_exit);
2428