Merge tag 'amd-drm-fixes-5.11-2020-12-23' of git://people.freedesktop.org/~agd5f...
[linux-2.6-microblaze.git] / drivers / regulator / bd70528-regulator.c
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2018 ROHM Semiconductors
3 // bd70528-regulator.c ROHM BD70528MWV regulator driver
4
5 #include <linux/delay.h>
6 #include <linux/err.h>
7 #include <linux/interrupt.h>
8 #include <linux/kernel.h>
9 #include <linux/mfd/rohm-bd70528.h>
10 #include <linux/module.h>
11 #include <linux/of.h>
12 #include <linux/platform_device.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/driver.h>
15 #include <linux/regulator/machine.h>
16 #include <linux/regulator/of_regulator.h>
17 #include <linux/slab.h>
18
19 #define BUCK_RAMPRATE_250MV 0
20 #define BUCK_RAMPRATE_125MV 1
21 #define BUCK_RAMP_MAX 250
22
23 static const struct linear_range bd70528_buck1_volts[] = {
24         REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
25         REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
26 };
27 static const struct linear_range bd70528_buck2_volts[] = {
28         REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
29         REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
30         REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
31 };
32 static const struct linear_range bd70528_buck3_volts[] = {
33         REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
34         REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
35 };
36
37 /* All LDOs have same voltage ranges */
38 static const struct linear_range bd70528_ldo_volts[] = {
39         REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
40         REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
41         REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
42         REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0),
43 };
44
45 /* Also both LEDs support same voltages */
46 static const unsigned int led_volts[] = {
47         20000, 30000
48 };
49
50 static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
51 {
52         if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
53                 unsigned int ramp_value = BUCK_RAMPRATE_250MV;
54
55                 if (ramp_delay <= 125)
56                         ramp_value = BUCK_RAMPRATE_125MV;
57
58                 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
59                                   BD70528_MASK_BUCK_RAMP,
60                                   ramp_value << BD70528_SIFT_BUCK_RAMP);
61         }
62         dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
63                 rdev->desc->name, ramp_delay);
64         return -EINVAL;
65 }
66
67 static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
68                                        unsigned int sel)
69 {
70         int ret;
71
72         ret = regulator_is_enabled_regmap(rdev);
73         if (ret < 0)
74                 return ret;
75
76         if (ret == 0)
77                 return regulator_set_voltage_sel_regmap(rdev, sel);
78
79         dev_err(&rdev->dev,
80                 "LED voltage change not allowed when led is enabled\n");
81
82         return -EBUSY;
83 }
84
85 static const struct regulator_ops bd70528_buck_ops = {
86         .enable = regulator_enable_regmap,
87         .disable = regulator_disable_regmap,
88         .is_enabled = regulator_is_enabled_regmap,
89         .list_voltage = regulator_list_voltage_linear_range,
90         .set_voltage_sel = regulator_set_voltage_sel_regmap,
91         .get_voltage_sel = regulator_get_voltage_sel_regmap,
92         .set_voltage_time_sel = regulator_set_voltage_time_sel,
93         .set_ramp_delay = bd70528_set_ramp_delay,
94 };
95
96 static const struct regulator_ops bd70528_ldo_ops = {
97         .enable = regulator_enable_regmap,
98         .disable = regulator_disable_regmap,
99         .is_enabled = regulator_is_enabled_regmap,
100         .list_voltage = regulator_list_voltage_linear_range,
101         .set_voltage_sel = regulator_set_voltage_sel_regmap,
102         .get_voltage_sel = regulator_get_voltage_sel_regmap,
103         .set_voltage_time_sel = regulator_set_voltage_time_sel,
104 };
105
106 static const struct regulator_ops bd70528_led_ops = {
107         .enable = regulator_enable_regmap,
108         .disable = regulator_disable_regmap,
109         .is_enabled = regulator_is_enabled_regmap,
110         .list_voltage = regulator_list_voltage_table,
111         .set_voltage_sel = bd70528_led_set_voltage_sel,
112         .get_voltage_sel = regulator_get_voltage_sel_regmap,
113 };
114
115 static const struct regulator_desc bd70528_desc[] = {
116         {
117                 .name = "buck1",
118                 .of_match = of_match_ptr("BUCK1"),
119                 .regulators_node = of_match_ptr("regulators"),
120                 .id = BD70528_BUCK1,
121                 .ops = &bd70528_buck_ops,
122                 .type = REGULATOR_VOLTAGE,
123                 .linear_ranges = bd70528_buck1_volts,
124                 .n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts),
125                 .n_voltages = BD70528_BUCK_VOLTS,
126                 .enable_reg = BD70528_REG_BUCK1_EN,
127                 .enable_mask = BD70528_MASK_RUN_EN,
128                 .vsel_reg = BD70528_REG_BUCK1_VOLT,
129                 .vsel_mask = BD70528_MASK_BUCK_VOLT,
130                 .owner = THIS_MODULE,
131         },
132         {
133                 .name = "buck2",
134                 .of_match = of_match_ptr("BUCK2"),
135                 .regulators_node = of_match_ptr("regulators"),
136                 .id = BD70528_BUCK2,
137                 .ops = &bd70528_buck_ops,
138                 .type = REGULATOR_VOLTAGE,
139                 .linear_ranges = bd70528_buck2_volts,
140                 .n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts),
141                 .n_voltages = BD70528_BUCK_VOLTS,
142                 .enable_reg = BD70528_REG_BUCK2_EN,
143                 .enable_mask = BD70528_MASK_RUN_EN,
144                 .vsel_reg = BD70528_REG_BUCK2_VOLT,
145                 .vsel_mask = BD70528_MASK_BUCK_VOLT,
146                 .owner = THIS_MODULE,
147         },
148         {
149                 .name = "buck3",
150                 .of_match = of_match_ptr("BUCK3"),
151                 .regulators_node = of_match_ptr("regulators"),
152                 .id = BD70528_BUCK3,
153                 .ops = &bd70528_buck_ops,
154                 .type = REGULATOR_VOLTAGE,
155                 .linear_ranges = bd70528_buck3_volts,
156                 .n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts),
157                 .n_voltages = BD70528_BUCK_VOLTS,
158                 .enable_reg = BD70528_REG_BUCK3_EN,
159                 .enable_mask = BD70528_MASK_RUN_EN,
160                 .vsel_reg = BD70528_REG_BUCK3_VOLT,
161                 .vsel_mask = BD70528_MASK_BUCK_VOLT,
162                 .owner = THIS_MODULE,
163         },
164         {
165                 .name = "ldo1",
166                 .of_match = of_match_ptr("LDO1"),
167                 .regulators_node = of_match_ptr("regulators"),
168                 .id = BD70528_LDO1,
169                 .ops = &bd70528_ldo_ops,
170                 .type = REGULATOR_VOLTAGE,
171                 .linear_ranges = bd70528_ldo_volts,
172                 .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
173                 .n_voltages = BD70528_LDO_VOLTS,
174                 .enable_reg = BD70528_REG_LDO1_EN,
175                 .enable_mask = BD70528_MASK_RUN_EN,
176                 .vsel_reg = BD70528_REG_LDO1_VOLT,
177                 .vsel_mask = BD70528_MASK_LDO_VOLT,
178                 .owner = THIS_MODULE,
179         },
180         {
181                 .name = "ldo2",
182                 .of_match = of_match_ptr("LDO2"),
183                 .regulators_node = of_match_ptr("regulators"),
184                 .id = BD70528_LDO2,
185                 .ops = &bd70528_ldo_ops,
186                 .type = REGULATOR_VOLTAGE,
187                 .linear_ranges = bd70528_ldo_volts,
188                 .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
189                 .n_voltages = BD70528_LDO_VOLTS,
190                 .enable_reg = BD70528_REG_LDO2_EN,
191                 .enable_mask = BD70528_MASK_RUN_EN,
192                 .vsel_reg = BD70528_REG_LDO2_VOLT,
193                 .vsel_mask = BD70528_MASK_LDO_VOLT,
194                 .owner = THIS_MODULE,
195         },
196         {
197                 .name = "ldo3",
198                 .of_match = of_match_ptr("LDO3"),
199                 .regulators_node = of_match_ptr("regulators"),
200                 .id = BD70528_LDO3,
201                 .ops = &bd70528_ldo_ops,
202                 .type = REGULATOR_VOLTAGE,
203                 .linear_ranges = bd70528_ldo_volts,
204                 .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
205                 .n_voltages = BD70528_LDO_VOLTS,
206                 .enable_reg = BD70528_REG_LDO3_EN,
207                 .enable_mask = BD70528_MASK_RUN_EN,
208                 .vsel_reg = BD70528_REG_LDO3_VOLT,
209                 .vsel_mask = BD70528_MASK_LDO_VOLT,
210                 .owner = THIS_MODULE,
211         },
212         {
213                 .name = "ldo_led1",
214                 .of_match = of_match_ptr("LDO_LED1"),
215                 .regulators_node = of_match_ptr("regulators"),
216                 .id = BD70528_LED1,
217                 .ops = &bd70528_led_ops,
218                 .type = REGULATOR_VOLTAGE,
219                 .volt_table = &led_volts[0],
220                 .n_voltages = ARRAY_SIZE(led_volts),
221                 .enable_reg = BD70528_REG_LED_EN,
222                 .enable_mask = BD70528_MASK_LED1_EN,
223                 .vsel_reg = BD70528_REG_LED_VOLT,
224                 .vsel_mask = BD70528_MASK_LED1_VOLT,
225                 .owner = THIS_MODULE,
226         },
227         {
228                 .name = "ldo_led2",
229                 .of_match = of_match_ptr("LDO_LED2"),
230                 .regulators_node = of_match_ptr("regulators"),
231                 .id = BD70528_LED2,
232                 .ops = &bd70528_led_ops,
233                 .type = REGULATOR_VOLTAGE,
234                 .volt_table = &led_volts[0],
235                 .n_voltages = ARRAY_SIZE(led_volts),
236                 .enable_reg = BD70528_REG_LED_EN,
237                 .enable_mask = BD70528_MASK_LED2_EN,
238                 .vsel_reg = BD70528_REG_LED_VOLT,
239                 .vsel_mask = BD70528_MASK_LED2_VOLT,
240                 .owner = THIS_MODULE,
241         },
242
243 };
244
245 static int bd70528_probe(struct platform_device *pdev)
246 {
247         struct rohm_regmap_dev *bd70528;
248         int i;
249         struct regulator_config config = {
250                 .dev = pdev->dev.parent,
251         };
252
253         bd70528 = dev_get_drvdata(pdev->dev.parent);
254         if (!bd70528) {
255                 dev_err(&pdev->dev, "No MFD driver data\n");
256                 return -EINVAL;
257         }
258
259         config.regmap = bd70528->regmap;
260
261         for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
262                 struct regulator_dev *rdev;
263
264                 rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i],
265                                                &config);
266                 if (IS_ERR(rdev)) {
267                         dev_err(&pdev->dev,
268                                 "failed to register %s regulator\n",
269                                 bd70528_desc[i].name);
270                         return PTR_ERR(rdev);
271                 }
272         }
273         return 0;
274 }
275
276 static struct platform_driver bd70528_regulator = {
277         .driver = {
278                 .name = "bd70528-pmic"
279         },
280         .probe = bd70528_probe,
281 };
282
283 module_platform_driver(bd70528_regulator);
284
285 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
286 MODULE_DESCRIPTION("BD70528 voltage regulator driver");
287 MODULE_LICENSE("GPL");
288 MODULE_ALIAS("platform:bd70528-pmic");