drivers/pwm/pwm-stm32.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) STMicroelectronics 2016
   4  *
   5  * Author: Gerald Baeza <gerald.baeza@st.com>
   6  *
   7  * Inspired by timer-stm32.c from Maxime Coquelin
   8  *             pwm-atmel.c from Bo Shen
   9  */
  10
  11 #include <linux/bitfield.h>
  12 #include <linux/mfd/stm32-timers.h>
  13 #include <linux/module.h>
  14 #include <linux/of.h>
  15 #include <linux/pinctrl/consumer.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/pwm.h>
  18
  19 #define CCMR_CHANNEL_SHIFT 8
  20 #define CCMR_CHANNEL_MASK  0xFF
  21 #define MAX_BREAKINPUT 2
  22
  23 struct stm32_breakinput {
  24         u32 index;
  25         u32 level;
  26         u32 filter;
  27 };
  28
  29 struct stm32_pwm {
  30         struct mutex lock; /* protect pwm config/enable */
  31         struct clk *clk;
  32         struct regmap *regmap;
  33         u32 max_arr;
  34         bool have_complementary_output;
  35         struct stm32_breakinput breakinputs[MAX_BREAKINPUT];
  36         unsigned int num_breakinputs;
  37         u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
  38 };
  39
  40 static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
  41 {
  42         return pwmchip_get_drvdata(chip);
  43 }
  44
  45 static u32 active_channels(struct stm32_pwm *dev)
  46 {
  47         u32 ccer;
  48
  49         regmap_read(dev->regmap, TIM_CCER, &ccer);
  50
  51         return ccer & TIM_CCER_CCXE;
  52 }
  53
  54 #define TIM_CCER_CC12P (TIM_CCER_CC1P | TIM_CCER_CC2P)
  55 #define TIM_CCER_CC12E (TIM_CCER_CC1E | TIM_CCER_CC2E)
  56 #define TIM_CCER_CC34P (TIM_CCER_CC3P | TIM_CCER_CC4P)
  57 #define TIM_CCER_CC34E (TIM_CCER_CC3E | TIM_CCER_CC4E)
  58
  59 /*
  60  * Capture using PWM input mode:
  61  *                              ___          ___
  62  * TI[1, 2, 3 or 4]: ........._|   |________|
  63  *                             ^0  ^1       ^2
  64  *                              .   .        .
  65  *                              .   .        XXXXX
  66  *                              .   .   XXXXX     |
  67  *                              .  XXXXX     .    |
  68  *                            XXXXX .        .    |
  69  * COUNTER:        ______XXXXX  .   .        .    |_XXX
  70  *                 start^       .   .        .        ^stop
  71  *                      .       .   .        .
  72  *                      v       v   .        v
  73  *                                  v
  74  * CCR1/CCR3:       tx..........t0...........t2
  75  * CCR2/CCR4:       tx..............t1.........
  76  *
  77  * DMA burst transfer:          |            |
  78  *                              v            v
  79  * DMA buffer:                  { t0, tx }   { t2, t1 }
  80  * DMA done:                                 ^
  81  *
  82  * 0: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
  83  *    + DMA transfer CCR[1/3] & CCR[2/4] values (t0, tx: doesn't care)
  84  * 1: IC2/4 snapchot on falling edge: counter value -> CCR2/CCR4
  85  * 2: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
  86  *    + DMA transfer CCR[1/3] & CCR[2/4] values (t2, t1)
  87  *
  88  * DMA done, compute:
  89  * - Period     = t2 - t0
  90  * - Duty cycle = t1 - t0
  91  */
  92 static int stm32_pwm_raw_capture(struct pwm_chip *chip, struct pwm_device *pwm,
  93                                  unsigned long tmo_ms, u32 *raw_prd,
  94                                  u32 *raw_dty)
  95 {
  96         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
  97         struct device *parent = pwmchip_parent(chip)->parent;
  98         enum stm32_timers_dmas dma_id;
  99         u32 ccen, ccr;
 100         int ret;
 101
 102         /* Ensure registers have been updated, enable counter and capture */
 103         regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
 104         regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
 105
 106         /* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */
 107         dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3;
 108         ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E;
 109         ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3;
 110         regmap_set_bits(priv->regmap, TIM_CCER, ccen);
 111
 112         /*
 113          * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both
 114          * CCR1 & CCR2 (or CCR3 & CCR4) on each capture event.
 115          * We'll get two capture snapchots: { CCR1, CCR2 }, { CCR1, CCR2 }
 116          * or { CCR3, CCR4 }, { CCR3, CCR4 }
 117          */
 118         ret = stm32_timers_dma_burst_read(parent, priv->capture, dma_id, ccr, 2,
 119                                           2, tmo_ms);
 120         if (ret)
 121                 goto stop;
 122
 123         /* Period: t2 - t0 (take care of counter overflow) */
 124         if (priv->capture[0] <= priv->capture[2])
 125                 *raw_prd = priv->capture[2] - priv->capture[0];
 126         else
 127                 *raw_prd = priv->max_arr - priv->capture[0] + priv->capture[2];
 128
 129         /* Duty cycle capture requires at least two capture units */
 130         if (pwm->chip->npwm < 2)
 131                 *raw_dty = 0;
 132         else if (priv->capture[0] <= priv->capture[3])
 133                 *raw_dty = priv->capture[3] - priv->capture[0];
 134         else
 135                 *raw_dty = priv->max_arr - priv->capture[0] + priv->capture[3];
 136
 137         if (*raw_dty > *raw_prd) {
 138                 /*
 139                  * Race beetween PWM input and DMA: it may happen
 140                  * falling edge triggers new capture on TI2/4 before DMA
 141                  * had a chance to read CCR2/4. It means capture[1]
 142                  * contains period + duty_cycle. So, subtract period.
 143                  */
 144                 *raw_dty -= *raw_prd;
 145         }
 146
 147 stop:
 148         regmap_clear_bits(priv->regmap, TIM_CCER, ccen);
 149         regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
 150
 151         return ret;
 152 }
 153
 154 static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
 155                              struct pwm_capture *result, unsigned long tmo_ms)
 156 {
 157         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 158         unsigned long long prd, div, dty;
 159         unsigned long rate;
 160         unsigned int psc = 0, icpsc, scale;
 161         u32 raw_prd = 0, raw_dty = 0;
 162         int ret = 0;
 163
 164         mutex_lock(&priv->lock);
 165
 166         if (active_channels(priv)) {
 167                 ret = -EBUSY;
 168                 goto unlock;
 169         }
 170
 171         ret = clk_enable(priv->clk);
 172         if (ret) {
 173                 dev_err(pwmchip_parent(chip), "failed to enable counter clock\n");
 174                 goto unlock;
 175         }
 176
 177         rate = clk_get_rate(priv->clk);
 178         if (!rate) {
 179                 ret = -EINVAL;
 180                 goto clk_dis;
 181         }
 182
 183         /* prescaler: fit timeout window provided by upper layer */
 184         div = (unsigned long long)rate * (unsigned long long)tmo_ms;
 185         do_div(div, MSEC_PER_SEC);
 186         prd = div;
 187         while ((div > priv->max_arr) && (psc < MAX_TIM_PSC)) {
 188                 psc++;
 189                 div = prd;
 190                 do_div(div, psc + 1);
 191         }
 192         regmap_write(priv->regmap, TIM_ARR, priv->max_arr);
 193         regmap_write(priv->regmap, TIM_PSC, psc);
 194
 195         /* Reset input selector to its default input and disable slave mode */
 196         regmap_write(priv->regmap, TIM_TISEL, 0x0);
 197         regmap_write(priv->regmap, TIM_SMCR, 0x0);
 198
 199         /* Map TI1 or TI2 PWM input to IC1 & IC2 (or TI3/4 to IC3 & IC4) */
 200         regmap_update_bits(priv->regmap,
 201                            pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
 202                            TIM_CCMR_CC1S | TIM_CCMR_CC2S, pwm->hwpwm & 0x1 ?
 203                            TIM_CCMR_CC1S_TI2 | TIM_CCMR_CC2S_TI2 :
 204                            TIM_CCMR_CC1S_TI1 | TIM_CCMR_CC2S_TI1);
 205
 206         /* Capture period on IC1/3 rising edge, duty cycle on IC2/4 falling. */
 207         regmap_update_bits(priv->regmap, TIM_CCER, pwm->hwpwm < 2 ?
 208                            TIM_CCER_CC12P : TIM_CCER_CC34P, pwm->hwpwm < 2 ?
 209                            TIM_CCER_CC2P : TIM_CCER_CC4P);
 210
 211         ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty);
 212         if (ret)
 213                 goto stop;
 214
 215         /*
 216          * Got a capture. Try to improve accuracy at high rates:
 217          * - decrease counter clock prescaler, scale up to max rate.
 218          * - use input prescaler, capture once every /2 /4 or /8 edges.
 219          */
 220         if (raw_prd) {
 221                 u32 max_arr = priv->max_arr - 0x1000; /* arbitrary margin */
 222
 223                 scale = max_arr / min(max_arr, raw_prd);
 224         } else {
 225                 scale = priv->max_arr; /* bellow resolution, use max scale */
 226         }
 227
 228         if (psc && scale > 1) {
 229                 /* 2nd measure with new scale */
 230                 psc /= scale;
 231                 regmap_write(priv->regmap, TIM_PSC, psc);
 232                 ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd,
 233                                             &raw_dty);
 234                 if (ret)
 235                         goto stop;
 236         }
 237
 238         /* Compute intermediate period not to exceed timeout at low rates */
 239         prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
 240         do_div(prd, rate);
 241
 242         for (icpsc = 0; icpsc < MAX_TIM_ICPSC ; icpsc++) {
 243                 /* input prescaler: also keep arbitrary margin */
 244                 if (raw_prd >= (priv->max_arr - 0x1000) >> (icpsc + 1))
 245                         break;
 246                 if (prd >= (tmo_ms * NSEC_PER_MSEC) >> (icpsc + 2))
 247                         break;
 248         }
 249
 250         if (!icpsc)
 251                 goto done;
 252
 253         /* Last chance to improve period accuracy, using input prescaler */
 254         regmap_update_bits(priv->regmap,
 255                            pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
 256                            TIM_CCMR_IC1PSC | TIM_CCMR_IC2PSC,
 257                            FIELD_PREP(TIM_CCMR_IC1PSC, icpsc) |
 258                            FIELD_PREP(TIM_CCMR_IC2PSC, icpsc));
 259
 260         ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty);
 261         if (ret)
 262                 goto stop;
 263
 264         if (raw_dty >= (raw_prd >> icpsc)) {
 265                 /*
 266                  * We may fall here using input prescaler, when input
 267                  * capture starts on high side (before falling edge).
 268                  * Example with icpsc to capture on each 4 events:
 269                  *
 270                  *       start   1st capture                     2nd capture
 271                  *         v     v                               v
 272                  *         ___   _____   _____   _____   _____   ____
 273                  * TI1..4     |__|    |__|    |__|    |__|    |__|
 274                  *            v  v    .  .    .  .    .       v  v
 275                  * icpsc1/3:  .  0    .  1    .  2    .  3    .  0
 276                  * icpsc2/4:  0       1       2       3       0
 277                  *            v  v                            v  v
 278                  * CCR1/3  ......t0..............................t2
 279                  * CCR2/4  ..t1..............................t1'...
 280                  *               .                            .  .
 281                  * Capture0:     .<----------------------------->.
 282                  * Capture1:     .<-------------------------->.  .
 283                  *               .                            .  .
 284                  * Period:       .<------>                    .  .
 285                  * Low side:                                  .<>.
 286                  *
 287                  * Result:
 288                  * - Period = Capture0 / icpsc
 289                  * - Duty = Period - Low side = Period - (Capture0 - Capture1)
 290                  */
 291                 raw_dty = (raw_prd >> icpsc) - (raw_prd - raw_dty);
 292         }
 293
 294 done:
 295         prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
 296         result->period = DIV_ROUND_UP_ULL(prd, rate << icpsc);
 297         dty = (unsigned long long)raw_dty * (psc + 1) * NSEC_PER_SEC;
 298         result->duty_cycle = DIV_ROUND_UP_ULL(dty, rate);
 299 stop:
 300         regmap_write(priv->regmap, TIM_CCER, 0);
 301         regmap_write(priv->regmap, pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 0);
 302         regmap_write(priv->regmap, TIM_PSC, 0);
 303 clk_dis:
 304         clk_disable(priv->clk);
 305 unlock:
 306         mutex_unlock(&priv->lock);
 307
 308         return ret;
 309 }
 310
 311 static int stm32_pwm_config(struct stm32_pwm *priv, unsigned int ch,
 312                             int duty_ns, int period_ns)
 313 {
 314         unsigned long long prd, div, dty;
 315         unsigned int prescaler = 0;
 316         u32 ccmr, mask, shift;
 317
 318         /* Period and prescaler values depends on clock rate */
 319         div = (unsigned long long)clk_get_rate(priv->clk) * period_ns;
 320
 321         do_div(div, NSEC_PER_SEC);
 322         prd = div;
 323
 324         while (div > priv->max_arr) {
 325                 prescaler++;
 326                 div = prd;
 327                 do_div(div, prescaler + 1);
 328         }
 329
 330         prd = div;
 331
 332         if (prescaler > MAX_TIM_PSC)
 333                 return -EINVAL;
 334
 335         /*
 336          * All channels share the same prescaler and counter so when two
 337          * channels are active at the same time we can't change them
 338          */
 339         if (active_channels(priv) & ~(1 << ch * 4)) {
 340                 u32 psc, arr;
 341
 342                 regmap_read(priv->regmap, TIM_PSC, &psc);
 343                 regmap_read(priv->regmap, TIM_ARR, &arr);
 344
 345                 if ((psc != prescaler) || (arr != prd - 1))
 346                         return -EBUSY;
 347         }
 348
 349         regmap_write(priv->regmap, TIM_PSC, prescaler);
 350         regmap_write(priv->regmap, TIM_ARR, prd - 1);
 351         regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE);
 352
 353         /* Calculate the duty cycles */
 354         dty = prd * duty_ns;
 355         do_div(dty, period_ns);
 356
 357         regmap_write(priv->regmap, TIM_CCR1 + 4 * ch, dty);
 358
 359         /* Configure output mode */
 360         shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT;
 361         ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift;
 362         mask = CCMR_CHANNEL_MASK << shift;
 363
 364         if (ch < 2)
 365                 regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr);
 366         else
 367                 regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr);
 368
 369         regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE);
 370
 371         return 0;
 372 }
 373
 374 static int stm32_pwm_set_polarity(struct stm32_pwm *priv, unsigned int ch,
 375                                   enum pwm_polarity polarity)
 376 {
 377         u32 mask;
 378
 379         mask = TIM_CCER_CC1P << (ch * 4);
 380         if (priv->have_complementary_output)
 381                 mask |= TIM_CCER_CC1NP << (ch * 4);
 382
 383         regmap_update_bits(priv->regmap, TIM_CCER, mask,
 384                            polarity == PWM_POLARITY_NORMAL ? 0 : mask);
 385
 386         return 0;
 387 }
 388
 389 static int stm32_pwm_enable(struct stm32_pwm *priv, unsigned int ch)
 390 {
 391         u32 mask;
 392         int ret;
 393
 394         ret = clk_enable(priv->clk);
 395         if (ret)
 396                 return ret;
 397
 398         /* Enable channel */
 399         mask = TIM_CCER_CC1E << (ch * 4);
 400         if (priv->have_complementary_output)
 401                 mask |= TIM_CCER_CC1NE << (ch * 4);
 402
 403         regmap_set_bits(priv->regmap, TIM_CCER, mask);
 404
 405         /* Make sure that registers are updated */
 406         regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
 407
 408         /* Enable controller */
 409         regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
 410
 411         return 0;
 412 }
 413
 414 static void stm32_pwm_disable(struct stm32_pwm *priv, unsigned int ch)
 415 {
 416         u32 mask;
 417
 418         /* Disable channel */
 419         mask = TIM_CCER_CC1E << (ch * 4);
 420         if (priv->have_complementary_output)
 421                 mask |= TIM_CCER_CC1NE << (ch * 4);
 422
 423         regmap_clear_bits(priv->regmap, TIM_CCER, mask);
 424
 425         /* When all channels are disabled, we can disable the controller */
 426         if (!active_channels(priv))
 427                 regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
 428
 429         clk_disable(priv->clk);
 430 }
 431
 432 static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 433                            const struct pwm_state *state)
 434 {
 435         bool enabled;
 436         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 437         int ret;
 438
 439         enabled = pwm->state.enabled;
 440
 441         if (enabled && !state->enabled) {
 442                 stm32_pwm_disable(priv, pwm->hwpwm);
 443                 return 0;
 444         }
 445
 446         if (state->polarity != pwm->state.polarity)
 447                 stm32_pwm_set_polarity(priv, pwm->hwpwm, state->polarity);
 448
 449         ret = stm32_pwm_config(priv, pwm->hwpwm,
 450                                state->duty_cycle, state->period);
 451         if (ret)
 452                 return ret;
 453
 454         if (!enabled && state->enabled)
 455                 ret = stm32_pwm_enable(priv, pwm->hwpwm);
 456
 457         return ret;
 458 }
 459
 460 static int stm32_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm,
 461                                   const struct pwm_state *state)
 462 {
 463         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 464         int ret;
 465
 466         /* protect common prescaler for all active channels */
 467         mutex_lock(&priv->lock);
 468         ret = stm32_pwm_apply(chip, pwm, state);
 469         mutex_unlock(&priv->lock);
 470
 471         return ret;
 472 }
 473
 474 static int stm32_pwm_get_state(struct pwm_chip *chip,
 475                                struct pwm_device *pwm, struct pwm_state *state)
 476 {
 477         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 478         int ch = pwm->hwpwm;
 479         unsigned long rate;
 480         u32 ccer, psc, arr, ccr;
 481         u64 dty, prd;
 482         int ret;
 483
 484         mutex_lock(&priv->lock);
 485
 486         ret = regmap_read(priv->regmap, TIM_CCER, &ccer);
 487         if (ret)
 488                 goto out;
 489
 490         state->enabled = ccer & (TIM_CCER_CC1E << (ch * 4));
 491         state->polarity = (ccer & (TIM_CCER_CC1P << (ch * 4))) ?
 492                           PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
 493         ret = regmap_read(priv->regmap, TIM_PSC, &psc);
 494         if (ret)
 495                 goto out;
 496         ret = regmap_read(priv->regmap, TIM_ARR, &arr);
 497         if (ret)
 498                 goto out;
 499         ret = regmap_read(priv->regmap, TIM_CCR1 + 4 * ch, &ccr);
 500         if (ret)
 501                 goto out;
 502
 503         rate = clk_get_rate(priv->clk);
 504
 505         prd = (u64)NSEC_PER_SEC * (psc + 1) * (arr + 1);
 506         state->period = DIV_ROUND_UP_ULL(prd, rate);
 507         dty = (u64)NSEC_PER_SEC * (psc + 1) * ccr;
 508         state->duty_cycle = DIV_ROUND_UP_ULL(dty, rate);
 509
 510 out:
 511         mutex_unlock(&priv->lock);
 512         return ret;
 513 }
 514
 515 static const struct pwm_ops stm32pwm_ops = {
 516         .apply = stm32_pwm_apply_locked,
 517         .get_state = stm32_pwm_get_state,
 518         .capture = IS_ENABLED(CONFIG_DMA_ENGINE) ? stm32_pwm_capture : NULL,
 519 };
 520
 521 static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
 522                                     const struct stm32_breakinput *bi)
 523 {
 524         u32 shift = TIM_BDTR_BKF_SHIFT(bi->index);
 525         u32 bke = TIM_BDTR_BKE(bi->index);
 526         u32 bkp = TIM_BDTR_BKP(bi->index);
 527         u32 bkf = TIM_BDTR_BKF(bi->index);
 528         u32 mask = bkf | bkp | bke;
 529         u32 bdtr;
 530
 531         bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke;
 532
 533         if (bi->level)
 534                 bdtr |= bkp;
 535
 536         regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
 537
 538         regmap_read(priv->regmap, TIM_BDTR, &bdtr);
 539
 540         return (bdtr & bke) ? 0 : -EINVAL;
 541 }
 542
 543 static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv)
 544 {
 545         unsigned int i;
 546         int ret;
 547
 548         for (i = 0; i < priv->num_breakinputs; i++) {
 549                 ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]);
 550                 if (ret < 0)
 551                         return ret;
 552         }
 553
 554         return 0;
 555 }
 556
 557 static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv,
 558                                        struct device_node *np)
 559 {
 560         int nb, ret, array_size;
 561         unsigned int i;
 562
 563         nb = of_property_count_elems_of_size(np, "st,breakinput",
 564                                              sizeof(struct stm32_breakinput));
 565
 566         /*
 567          * Because "st,breakinput" parameter is optional do not make probe
 568          * failed if it doesn't exist.
 569          */
 570         if (nb <= 0)
 571                 return 0;
 572
 573         if (nb > MAX_BREAKINPUT)
 574                 return -EINVAL;
 575
 576         priv->num_breakinputs = nb;
 577         array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
 578         ret = of_property_read_u32_array(np, "st,breakinput",
 579                                          (u32 *)priv->breakinputs, array_size);
 580         if (ret)
 581                 return ret;
 582
 583         for (i = 0; i < priv->num_breakinputs; i++) {
 584                 if (priv->breakinputs[i].index > 1 ||
 585                     priv->breakinputs[i].level > 1 ||
 586                     priv->breakinputs[i].filter > 15)
 587                         return -EINVAL;
 588         }
 589
 590         return stm32_pwm_apply_breakinputs(priv);
 591 }
 592
 593 static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
 594 {
 595         u32 ccer;
 596
 597         /*
 598          * If complementary bit doesn't exist writing 1 will have no
 599          * effect so we can detect it.
 600          */
 601         regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
 602         regmap_read(priv->regmap, TIM_CCER, &ccer);
 603         regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
 604
 605         priv->have_complementary_output = (ccer != 0);
 606 }
 607
 608 static unsigned int stm32_pwm_detect_channels(struct regmap *regmap,
 609                                               unsigned int *num_enabled)
 610 {
 611         u32 ccer, ccer_backup;
 612
 613         /*
 614          * If channels enable bits don't exist writing 1 will have no
 615          * effect so we can detect and count them.
 616          */
 617         regmap_read(regmap, TIM_CCER, &ccer_backup);
 618         regmap_set_bits(regmap, TIM_CCER, TIM_CCER_CCXE);
 619         regmap_read(regmap, TIM_CCER, &ccer);
 620         regmap_write(regmap, TIM_CCER, ccer_backup);
 621
 622         *num_enabled = hweight32(ccer_backup & TIM_CCER_CCXE);
 623
 624         return hweight32(ccer & TIM_CCER_CCXE);
 625 }
 626
 627 static int stm32_pwm_probe(struct platform_device *pdev)
 628 {
 629         struct device *dev = &pdev->dev;
 630         struct device_node *np = dev->of_node;
 631         struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
 632         struct pwm_chip *chip;
 633         struct stm32_pwm *priv;
 634         unsigned int npwm, num_enabled;
 635         unsigned int i;
 636         int ret;
 637
 638         npwm = stm32_pwm_detect_channels(ddata->regmap, &num_enabled);
 639
 640         chip = devm_pwmchip_alloc(dev, npwm, sizeof(*priv));
 641         if (IS_ERR(chip))
 642                 return PTR_ERR(chip);
 643         priv = to_stm32_pwm_dev(chip);
 644
 645         mutex_init(&priv->lock);
 646         priv->regmap = ddata->regmap;
 647         priv->clk = ddata->clk;
 648         priv->max_arr = ddata->max_arr;
 649
 650         if (!priv->regmap || !priv->clk)
 651                 return -EINVAL;
 652
 653         ret = stm32_pwm_probe_breakinputs(priv, np);
 654         if (ret)
 655                 return ret;
 656
 657         stm32_pwm_detect_complementary(priv);
 658
 659         chip->ops = &stm32pwm_ops;
 660
 661         /* Initialize clock refcount to number of enabled PWM channels. */
 662         for (i = 0; i < num_enabled; i++)
 663                 clk_enable(priv->clk);
 664
 665         ret = devm_pwmchip_add(dev, chip);
 666         if (ret < 0)
 667                 return ret;
 668
 669         platform_set_drvdata(pdev, chip);
 670
 671         return 0;
 672 }
 673
 674 static int stm32_pwm_suspend(struct device *dev)
 675 {
 676         struct pwm_chip *chip = dev_get_drvdata(dev);
 677         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 678         unsigned int i;
 679         u32 ccer, mask;
 680
 681         /* Look for active channels */
 682         ccer = active_channels(priv);
 683
 684         for (i = 0; i < chip->npwm; i++) {
 685                 mask = TIM_CCER_CC1E << (i * 4);
 686                 if (ccer & mask) {
 687                         dev_err(dev, "PWM %u still in use by consumer %s\n",
 688                                 i, chip->pwms[i].label);
 689                         return -EBUSY;
 690                 }
 691         }
 692
 693         return pinctrl_pm_select_sleep_state(dev);
 694 }
 695
 696 static int stm32_pwm_resume(struct device *dev)
 697 {
 698         struct pwm_chip *chip = dev_get_drvdata(dev);
 699         struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
 700         int ret;
 701
 702         ret = pinctrl_pm_select_default_state(dev);
 703         if (ret)
 704                 return ret;
 705
 706         /* restore breakinput registers that may have been lost in low power */
 707         return stm32_pwm_apply_breakinputs(priv);
 708 }
 709
 710 static DEFINE_SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume);
 711
 712 static const struct of_device_id stm32_pwm_of_match[] = {
 713         { .compatible = "st,stm32-pwm", },
 714         { /* end node */ },
 715 };
 716 MODULE_DEVICE_TABLE(of, stm32_pwm_of_match);
 717
 718 static struct platform_driver stm32_pwm_driver = {
 719         .probe  = stm32_pwm_probe,
 720         .driver = {
 721                 .name = "stm32-pwm",
 722                 .of_match_table = stm32_pwm_of_match,
 723                 .pm = pm_ptr(&stm32_pwm_pm_ops),
 724         },
 725 };
 726 module_platform_driver(stm32_pwm_driver);
 727
 728 MODULE_ALIAS("platform:stm32-pwm");
 729 MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver");
 730 MODULE_LICENSE("GPL v2");