drivers/power/supply/cw2015_battery.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Fuel gauge driver for CellWise 2013 / 2015
   4  *
   5  * Copyright (C) 2012, RockChip
   6  * Copyright (C) 2020, Tobias Schramm
   7  *
   8  * Authors: xuhuicong <xhc@rock-chips.com>
   9  * Authors: Tobias Schramm <t.schramm@manjaro.org>
  10  */
  11
  12 #include <linux/bits.h>
  13 #include <linux/delay.h>
  14 #include <linux/i2c.h>
  15 #include <linux/gfp.h>
  16 #include <linux/gpio/consumer.h>
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/power_supply.h>
  20 #include <linux/property.h>
  21 #include <linux/regmap.h>
  22 #include <linux/time.h>
  23 #include <linux/workqueue.h>
  24 #include <linux/devm-helpers.h>
  25
  26 #define CW2015_SIZE_BATINFO             64
  27
  28 #define CW2015_RESET_TRIES              5
  29
  30 #define CW2015_REG_VERSION              0x00
  31 #define CW2015_REG_VCELL                0x02
  32 #define CW2015_REG_SOC                  0x04
  33 #define CW2015_REG_RRT_ALERT            0x06
  34 #define CW2015_REG_CONFIG               0x08
  35 #define CW2015_REG_MODE                 0x0A
  36 #define CW2015_REG_BATINFO              0x10
  37
  38 #define CW2015_MODE_SLEEP_MASK          GENMASK(7, 6)
  39 #define CW2015_MODE_SLEEP               (0x03 << 6)
  40 #define CW2015_MODE_NORMAL              (0x00 << 6)
  41 #define CW2015_MODE_QUICK_START         (0x03 << 4)
  42 #define CW2015_MODE_RESTART             (0x0f << 0)
  43
  44 #define CW2015_CONFIG_UPDATE_FLG        (0x01 << 1)
  45 #define CW2015_ATHD(x)                  ((x) << 3)
  46 #define CW2015_MASK_ATHD                GENMASK(7, 3)
  47 #define CW2015_MASK_SOC                 GENMASK(12, 0)
  48
  49 /* reset gauge of no valid state of charge could be polled for 40s */
  50 #define CW2015_BAT_SOC_ERROR_MS         (40 * MSEC_PER_SEC)
  51 /* reset gauge if state of charge stuck for half an hour during charging */
  52 #define CW2015_BAT_CHARGING_STUCK_MS    (1800 * MSEC_PER_SEC)
  53
  54 /* poll interval from CellWise GPL Android driver example */
  55 #define CW2015_DEFAULT_POLL_INTERVAL_MS         8000
  56
  57 #define CW2015_AVERAGING_SAMPLES                3
  58
  59 struct cw_battery {
  60         struct device *dev;
  61         struct workqueue_struct *battery_workqueue;
  62         struct delayed_work battery_delay_work;
  63         struct regmap *regmap;
  64         struct power_supply *rk_bat;
  65         struct power_supply_battery_info *battery;
  66         u8 *bat_profile;
  67
  68         bool charger_attached;
  69         bool battery_changed;
  70
  71         int soc;
  72         int voltage_mv;
  73         int status;
  74         int time_to_empty;
  75         int charge_count;
  76
  77         u32 poll_interval_ms;
  78         u8 alert_level;
  79
  80         unsigned int read_errors;
  81         unsigned int charge_stuck_cnt;
  82 };
  83
  84 static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
  85 {
  86         __be16 value;
  87         int ret;
  88
  89         ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
  90         if (ret)
  91                 return ret;
  92
  93         *val = be16_to_cpu(value);
  94         return 0;
  95 }
  96
  97 static int cw_update_profile(struct cw_battery *cw_bat)
  98 {
  99         int ret;
 100         unsigned int reg_val;
 101         u8 reset_val;
 102
 103         /* make sure gauge is not in sleep mode */
 104         ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
 105         if (ret)
 106                 return ret;
 107
 108         reset_val = reg_val;
 109         if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
 110                 dev_err(cw_bat->dev,
 111                         "Gauge is in sleep mode, can't update battery info\n");
 112                 return -EINVAL;
 113         }
 114
 115         /* write new battery info */
 116         ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
 117                                cw_bat->bat_profile,
 118                                CW2015_SIZE_BATINFO);
 119         if (ret)
 120                 return ret;
 121
 122         /* set config update flag  */
 123         reg_val |= CW2015_CONFIG_UPDATE_FLG;
 124         reg_val &= ~CW2015_MASK_ATHD;
 125         reg_val |= CW2015_ATHD(cw_bat->alert_level);
 126         ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
 127         if (ret)
 128                 return ret;
 129
 130         /* reset gauge to apply new battery profile */
 131         reset_val &= ~CW2015_MODE_RESTART;
 132         reg_val = reset_val | CW2015_MODE_RESTART;
 133         ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
 134         if (ret)
 135                 return ret;
 136
 137         /* wait for gauge to reset */
 138         msleep(20);
 139
 140         /* clear reset flag */
 141         ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
 142         if (ret)
 143                 return ret;
 144
 145         /* wait for gauge to become ready */
 146         ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
 147                                        reg_val, reg_val <= 100,
 148                                        10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
 149         if (ret)
 150                 dev_err(cw_bat->dev,
 151                         "Gauge did not become ready after profile upload\n");
 152         else
 153                 dev_dbg(cw_bat->dev, "Battery profile updated\n");
 154
 155         return ret;
 156 }
 157
 158 static int cw_init(struct cw_battery *cw_bat)
 159 {
 160         int ret;
 161         unsigned int reg_val = CW2015_MODE_SLEEP;
 162
 163         if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
 164                 reg_val = CW2015_MODE_NORMAL;
 165                 ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
 166                 if (ret)
 167                         return ret;
 168         }
 169
 170         ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
 171         if (ret)
 172                 return ret;
 173
 174         if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
 175                 dev_dbg(cw_bat->dev, "Setting new alert level\n");
 176                 reg_val &= ~CW2015_MASK_ATHD;
 177                 reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
 178                 ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
 179                 if (ret)
 180                         return ret;
 181         }
 182
 183         ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
 184         if (ret)
 185                 return ret;
 186
 187         if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
 188                 dev_dbg(cw_bat->dev,
 189                         "Battery profile not present, uploading battery profile\n");
 190                 if (cw_bat->bat_profile) {
 191                         ret = cw_update_profile(cw_bat);
 192                         if (ret) {
 193                                 dev_err(cw_bat->dev,
 194                                         "Failed to upload battery profile\n");
 195                                 return ret;
 196                         }
 197                 } else {
 198                         dev_warn(cw_bat->dev,
 199                                  "No profile specified, continuing without profile\n");
 200                 }
 201         } else if (cw_bat->bat_profile) {
 202                 u8 bat_info[CW2015_SIZE_BATINFO];
 203
 204                 ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
 205                                       bat_info, CW2015_SIZE_BATINFO);
 206                 if (ret) {
 207                         dev_err(cw_bat->dev,
 208                                 "Failed to read stored battery profile\n");
 209                         return ret;
 210                 }
 211
 212                 if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
 213                         dev_warn(cw_bat->dev, "Replacing stored battery profile\n");
 214                         ret = cw_update_profile(cw_bat);
 215                         if (ret)
 216                                 return ret;
 217                 }
 218         } else {
 219                 dev_warn(cw_bat->dev,
 220                          "Can't check current battery profile, no profile provided\n");
 221         }
 222
 223         dev_dbg(cw_bat->dev, "Battery profile configured\n");
 224         return 0;
 225 }
 226
 227 static int cw_power_on_reset(struct cw_battery *cw_bat)
 228 {
 229         int ret;
 230         unsigned char reset_val;
 231
 232         reset_val = CW2015_MODE_SLEEP;
 233         ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
 234         if (ret)
 235                 return ret;
 236
 237         /* wait for gauge to enter sleep */
 238         msleep(20);
 239
 240         reset_val = CW2015_MODE_NORMAL;
 241         ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
 242         if (ret)
 243                 return ret;
 244
 245         ret = cw_init(cw_bat);
 246         if (ret)
 247                 return ret;
 248         return 0;
 249 }
 250
 251 #define HYSTERESIS(current, previous, up, down) \
 252         (((current) < (previous) + (up)) && ((current) > (previous) - (down)))
 253
 254 static int cw_get_soc(struct cw_battery *cw_bat)
 255 {
 256         unsigned int soc;
 257         int ret;
 258
 259         ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
 260         if (ret)
 261                 return ret;
 262
 263         if (soc > 100) {
 264                 int max_error_cycles =
 265                         CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
 266
 267                 dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc);
 268                 cw_bat->read_errors++;
 269                 if (cw_bat->read_errors > max_error_cycles) {
 270                         dev_warn(cw_bat->dev,
 271                                  "Too many invalid SoC reports, resetting gauge\n");
 272                         cw_power_on_reset(cw_bat);
 273                         cw_bat->read_errors = 0;
 274                 }
 275                 return cw_bat->soc;
 276         }
 277         cw_bat->read_errors = 0;
 278
 279         /* Reset gauge if stuck while charging */
 280         if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
 281                 int max_stuck_cycles =
 282                         CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
 283
 284                 cw_bat->charge_stuck_cnt++;
 285                 if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
 286                         dev_warn(cw_bat->dev,
 287                                  "SoC stuck @%u%%, resetting gauge\n", soc);
 288                         cw_power_on_reset(cw_bat);
 289                         cw_bat->charge_stuck_cnt = 0;
 290                 }
 291         } else {
 292                 cw_bat->charge_stuck_cnt = 0;
 293         }
 294
 295         /* Ignore voltage dips during charge */
 296         if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
 297                 soc = cw_bat->soc;
 298
 299         /* Ignore voltage spikes during discharge */
 300         if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
 301                 soc = cw_bat->soc;
 302
 303         return soc;
 304 }
 305
 306 static int cw_get_voltage(struct cw_battery *cw_bat)
 307 {
 308         int ret, i, voltage_mv;
 309         u16 reg_val;
 310         u32 avg = 0;
 311
 312         for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
 313                 ret = cw_read_word(cw_bat, CW2015_REG_VCELL, &reg_val);
 314                 if (ret)
 315                         return ret;
 316
 317                 avg += reg_val;
 318         }
 319         avg /= CW2015_AVERAGING_SAMPLES;
 320
 321         /*
 322          * 305 uV per ADC step
 323          * Use 312 / 1024  as efficient approximation of 305 / 1000
 324          * Negligible error of 0.1%
 325          */
 326         voltage_mv = avg * 312 / 1024;
 327
 328         dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
 329                 voltage_mv, reg_val);
 330         return voltage_mv;
 331 }
 332
 333 static int cw_get_time_to_empty(struct cw_battery *cw_bat)
 334 {
 335         int ret;
 336         u16 value16;
 337
 338         ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
 339         if (ret)
 340                 return ret;
 341
 342         return value16 & CW2015_MASK_SOC;
 343 }
 344
 345 static void cw_update_charge_status(struct cw_battery *cw_bat)
 346 {
 347         int ret;
 348
 349         ret = power_supply_am_i_supplied(cw_bat->rk_bat);
 350         if (ret < 0) {
 351                 dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret);
 352         } else {
 353                 bool charger_attached;
 354
 355                 charger_attached = !!ret;
 356                 if (cw_bat->charger_attached != charger_attached) {
 357                         cw_bat->battery_changed = true;
 358                         if (charger_attached)
 359                                 cw_bat->charge_count++;
 360                 }
 361                 cw_bat->charger_attached = charger_attached;
 362         }
 363 }
 364
 365 static void cw_update_soc(struct cw_battery *cw_bat)
 366 {
 367         int soc;
 368
 369         soc = cw_get_soc(cw_bat);
 370         if (soc < 0)
 371                 dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc);
 372         else if (cw_bat->soc != soc) {
 373                 cw_bat->soc = soc;
 374                 cw_bat->battery_changed = true;
 375         }
 376 }
 377
 378 static void cw_update_voltage(struct cw_battery *cw_bat)
 379 {
 380         int voltage_mv;
 381
 382         voltage_mv = cw_get_voltage(cw_bat);
 383         if (voltage_mv < 0)
 384                 dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n",
 385                         voltage_mv);
 386         else
 387                 cw_bat->voltage_mv = voltage_mv;
 388 }
 389
 390 static void cw_update_status(struct cw_battery *cw_bat)
 391 {
 392         int status = POWER_SUPPLY_STATUS_DISCHARGING;
 393
 394         if (cw_bat->charger_attached) {
 395                 if (cw_bat->soc >= 100)
 396                         status = POWER_SUPPLY_STATUS_FULL;
 397                 else
 398                         status = POWER_SUPPLY_STATUS_CHARGING;
 399         }
 400
 401         if (cw_bat->status != status)
 402                 cw_bat->battery_changed = true;
 403         cw_bat->status = status;
 404 }
 405
 406 static void cw_update_time_to_empty(struct cw_battery *cw_bat)
 407 {
 408         int time_to_empty;
 409
 410         time_to_empty = cw_get_time_to_empty(cw_bat);
 411         if (time_to_empty < 0)
 412                 dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n",
 413                         time_to_empty);
 414         else if (cw_bat->time_to_empty != time_to_empty) {
 415                 cw_bat->time_to_empty = time_to_empty;
 416                 cw_bat->battery_changed = true;
 417         }
 418 }
 419
 420 static void cw_bat_work(struct work_struct *work)
 421 {
 422         struct delayed_work *delay_work;
 423         struct cw_battery *cw_bat;
 424         int ret;
 425         unsigned int reg_val;
 426
 427         delay_work = to_delayed_work(work);
 428         cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
 429         ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
 430         if (ret) {
 431                 dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret);
 432         } else {
 433                 if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
 434                         int i;
 435
 436                         for (i = 0; i < CW2015_RESET_TRIES; i++) {
 437                                 if (!cw_power_on_reset(cw_bat))
 438                                         break;
 439                         }
 440                 }
 441                 cw_update_soc(cw_bat);
 442                 cw_update_voltage(cw_bat);
 443                 cw_update_charge_status(cw_bat);
 444                 cw_update_status(cw_bat);
 445                 cw_update_time_to_empty(cw_bat);
 446         }
 447         dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached);
 448         dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status);
 449         dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc);
 450         dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv);
 451
 452         if (cw_bat->battery_changed)
 453                 power_supply_changed(cw_bat->rk_bat);
 454         cw_bat->battery_changed = false;
 455
 456         queue_delayed_work(cw_bat->battery_workqueue,
 457                            &cw_bat->battery_delay_work,
 458                            msecs_to_jiffies(cw_bat->poll_interval_ms));
 459 }
 460
 461 static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
 462 {
 463         return  cw_bat->time_to_empty > 0 &&
 464                 cw_bat->time_to_empty < CW2015_MASK_SOC &&
 465                 cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
 466 }
 467
 468 static int cw_battery_get_property(struct power_supply *psy,
 469                                    enum power_supply_property psp,
 470                                    union power_supply_propval *val)
 471 {
 472         struct cw_battery *cw_bat;
 473
 474         cw_bat = power_supply_get_drvdata(psy);
 475         switch (psp) {
 476         case POWER_SUPPLY_PROP_CAPACITY:
 477                 val->intval = cw_bat->soc;
 478                 break;
 479
 480         case POWER_SUPPLY_PROP_STATUS:
 481                 val->intval = cw_bat->status;
 482                 break;
 483
 484         case POWER_SUPPLY_PROP_PRESENT:
 485                 val->intval = !!cw_bat->voltage_mv;
 486                 break;
 487
 488         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 489                 val->intval = cw_bat->voltage_mv * 1000;
 490                 break;
 491
 492         case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
 493                 if (cw_battery_valid_time_to_empty(cw_bat))
 494                         val->intval = cw_bat->time_to_empty * 60;
 495                 else
 496                         val->intval = 0;
 497                 break;
 498
 499         case POWER_SUPPLY_PROP_TECHNOLOGY:
 500                 val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 501                 break;
 502
 503         case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 504                 val->intval = cw_bat->charge_count;
 505                 break;
 506
 507         case POWER_SUPPLY_PROP_CHARGE_FULL:
 508         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 509                 if (cw_bat->battery->charge_full_design_uah > 0)
 510                         val->intval = cw_bat->battery->charge_full_design_uah;
 511                 else
 512                         val->intval = 0;
 513                 break;
 514
 515         case POWER_SUPPLY_PROP_CHARGE_NOW:
 516                 val->intval = cw_bat->battery->charge_full_design_uah;
 517                 val->intval = val->intval * cw_bat->soc / 100;
 518                 break;
 519
 520         case POWER_SUPPLY_PROP_CURRENT_NOW:
 521                 if (cw_battery_valid_time_to_empty(cw_bat) &&
 522                     cw_bat->battery->charge_full_design_uah > 0) {
 523                         /* calculate remaining capacity */
 524                         val->intval = cw_bat->battery->charge_full_design_uah;
 525                         val->intval = val->intval * cw_bat->soc / 100;
 526
 527                         /* estimate current based on time to empty */
 528                         val->intval = 60 * val->intval / cw_bat->time_to_empty;
 529                 } else {
 530                         val->intval = 0;
 531                 }
 532
 533                 break;
 534
 535         default:
 536                 break;
 537         }
 538         return 0;
 539 }
 540
 541 static enum power_supply_property cw_battery_properties[] = {
 542         POWER_SUPPLY_PROP_CAPACITY,
 543         POWER_SUPPLY_PROP_STATUS,
 544         POWER_SUPPLY_PROP_PRESENT,
 545         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 546         POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
 547         POWER_SUPPLY_PROP_TECHNOLOGY,
 548         POWER_SUPPLY_PROP_CHARGE_COUNTER,
 549         POWER_SUPPLY_PROP_CHARGE_FULL,
 550         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 551         POWER_SUPPLY_PROP_CHARGE_NOW,
 552         POWER_SUPPLY_PROP_CURRENT_NOW,
 553 };
 554
 555 static const struct power_supply_desc cw2015_bat_desc = {
 556         .name           = "cw2015-battery",
 557         .type           = POWER_SUPPLY_TYPE_BATTERY,
 558         .properties     = cw_battery_properties,
 559         .num_properties = ARRAY_SIZE(cw_battery_properties),
 560         .get_property   = cw_battery_get_property,
 561 };
 562
 563 static int cw2015_parse_properties(struct cw_battery *cw_bat)
 564 {
 565         struct device *dev = cw_bat->dev;
 566         int length;
 567         int ret;
 568
 569         length = device_property_count_u8(dev, "cellwise,battery-profile");
 570         if (length < 0) {
 571                 dev_warn(cw_bat->dev,
 572                          "No battery-profile found, using current flash contents\n");
 573         } else if (length != CW2015_SIZE_BATINFO) {
 574                 dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
 575                         CW2015_SIZE_BATINFO);
 576                 return -EINVAL;
 577         } else {
 578                 cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
 579                 if (!cw_bat->bat_profile)
 580                         return -ENOMEM;
 581
 582                 ret = device_property_read_u8_array(dev,
 583                                                 "cellwise,battery-profile",
 584                                                 cw_bat->bat_profile,
 585                                                 length);
 586                 if (ret)
 587                         return ret;
 588         }
 589
 590         ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms",
 591                                        &cw_bat->poll_interval_ms);
 592         if (ret) {
 593                 dev_dbg(cw_bat->dev, "Using default poll interval\n");
 594                 cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
 595         }
 596
 597         return 0;
 598 }
 599
 600 static const struct regmap_range regmap_ranges_rd_yes[] = {
 601         regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
 602         regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
 603         regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
 604         regmap_reg_range(CW2015_REG_BATINFO,
 605                         CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
 606 };
 607
 608 static const struct regmap_access_table regmap_rd_table = {
 609         .yes_ranges = regmap_ranges_rd_yes,
 610         .n_yes_ranges = 4,
 611 };
 612
 613 static const struct regmap_range regmap_ranges_wr_yes[] = {
 614         regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
 615         regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
 616         regmap_reg_range(CW2015_REG_BATINFO,
 617                         CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
 618 };
 619
 620 static const struct regmap_access_table regmap_wr_table = {
 621         .yes_ranges = regmap_ranges_wr_yes,
 622         .n_yes_ranges = 3,
 623 };
 624
 625 static const struct regmap_range regmap_ranges_vol_yes[] = {
 626         regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
 627 };
 628
 629 static const struct regmap_access_table regmap_vol_table = {
 630         .yes_ranges = regmap_ranges_vol_yes,
 631         .n_yes_ranges = 1,
 632 };
 633
 634 static const struct regmap_config cw2015_regmap_config = {
 635         .reg_bits = 8,
 636         .val_bits = 8,
 637         .rd_table = &regmap_rd_table,
 638         .wr_table = &regmap_wr_table,
 639         .volatile_table = &regmap_vol_table,
 640         .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
 641 };
 642
 643 static int cw_bat_probe(struct i2c_client *client)
 644 {
 645         int ret;
 646         struct cw_battery *cw_bat;
 647         struct power_supply_config psy_cfg = { 0 };
 648
 649         cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
 650         if (!cw_bat)
 651                 return -ENOMEM;
 652
 653         i2c_set_clientdata(client, cw_bat);
 654         cw_bat->dev = &client->dev;
 655         cw_bat->soc = 1;
 656
 657         ret = cw2015_parse_properties(cw_bat);
 658         if (ret) {
 659                 dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n");
 660                 return ret;
 661         }
 662
 663         cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
 664         if (IS_ERR(cw_bat->regmap)) {
 665                 dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n",
 666                         PTR_ERR(cw_bat->regmap));
 667                 return PTR_ERR(cw_bat->regmap);
 668         }
 669
 670         ret = cw_init(cw_bat);
 671         if (ret) {
 672                 dev_err(cw_bat->dev, "Init failed: %d\n", ret);
 673                 return ret;
 674         }
 675
 676         psy_cfg.drv_data = cw_bat;
 677         psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
 678
 679         cw_bat->rk_bat = devm_power_supply_register(&client->dev,
 680                                                     &cw2015_bat_desc,
 681                                                     &psy_cfg);
 682         if (IS_ERR(cw_bat->rk_bat)) {
 683                 /* try again if this happens */
 684                 dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat),
 685                         "Failed to register power supply\n");
 686                 return PTR_ERR(cw_bat->rk_bat);
 687         }
 688
 689         ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
 690         if (ret) {
 691                 /* Allocate an empty battery */
 692                 cw_bat->battery = devm_kzalloc(&client->dev,
 693                                                sizeof(*cw_bat->battery),
 694                                                GFP_KERNEL);
 695                 if (!cw_bat->battery)
 696                         return -ENOMEM;
 697                 dev_warn(cw_bat->dev,
 698                          "No monitored battery, some properties will be missing\n");
 699         }
 700
 701         cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
 702         if (!cw_bat->battery_workqueue)
 703                 return -ENOMEM;
 704
 705         devm_delayed_work_autocancel(&client->dev,
 706                                                           &cw_bat->battery_delay_work, cw_bat_work);
 707         queue_delayed_work(cw_bat->battery_workqueue,
 708                            &cw_bat->battery_delay_work, msecs_to_jiffies(10));
 709         return 0;
 710 }
 711
 712 static int __maybe_unused cw_bat_suspend(struct device *dev)
 713 {
 714         struct i2c_client *client = to_i2c_client(dev);
 715         struct cw_battery *cw_bat = i2c_get_clientdata(client);
 716
 717         cancel_delayed_work_sync(&cw_bat->battery_delay_work);
 718         return 0;
 719 }
 720
 721 static int __maybe_unused cw_bat_resume(struct device *dev)
 722 {
 723         struct i2c_client *client = to_i2c_client(dev);
 724         struct cw_battery *cw_bat = i2c_get_clientdata(client);
 725
 726         queue_delayed_work(cw_bat->battery_workqueue,
 727                            &cw_bat->battery_delay_work, 0);
 728         return 0;
 729 }
 730
 731 static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
 732
 733 static const struct i2c_device_id cw_bat_id_table[] = {
 734         { "cw2015", 0 },
 735         { }
 736 };
 737
 738 static const struct of_device_id cw2015_of_match[] = {
 739         { .compatible = "cellwise,cw2015" },
 740         { }
 741 };
 742 MODULE_DEVICE_TABLE(of, cw2015_of_match);
 743
 744 static struct i2c_driver cw_bat_driver = {
 745         .driver = {
 746                 .name = "cw2015",
 747                 .of_match_table = cw2015_of_match,
 748                 .pm = &cw_bat_pm_ops,
 749         },
 750         .probe = cw_bat_probe,
 751         .id_table = cw_bat_id_table,
 752 };
 753
 754 module_i2c_driver(cw_bat_driver);
 755
 756 MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
 757 MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
 758 MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
 759 MODULE_LICENSE("GPL");