drivers/power/supply/cpcap-battery.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Battery driver for CPCAP PMIC
   4  *
   5  * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
   6  *
   7  * Some parts of the code based on earlier Motorola mapphone Linux kernel
   8  * drivers:
   9  *
  10  * Copyright (C) 2009-2010 Motorola, Inc.
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/err.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/of.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/power_supply.h>
  21 #include <linux/reboot.h>
  22 #include <linux/regmap.h>
  23 #include <linux/nvmem-consumer.h>
  24 #include <linux/moduleparam.h>
  25
  26 #include <linux/iio/consumer.h>
  27 #include <linux/iio/types.h>
  28 #include <linux/mfd/motorola-cpcap.h>
  29
  30 /*
  31  * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to
  32  * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0"
  33  * to enable BATTDETEN, LOBAT and EOL features. We currently use
  34  * LOBAT interrupts instead of EOL.
  35  */
  36 #define CPCAP_REG_BPEOL_BIT_EOL9        BIT(9)  /* Set for EOL irq */
  37 #define CPCAP_REG_BPEOL_BIT_EOL8        BIT(8)  /* Set for EOL irq */
  38 #define CPCAP_REG_BPEOL_BIT_UNKNOWN7    BIT(7)
  39 #define CPCAP_REG_BPEOL_BIT_UNKNOWN6    BIT(6)
  40 #define CPCAP_REG_BPEOL_BIT_UNKNOWN5    BIT(5)
  41 #define CPCAP_REG_BPEOL_BIT_EOL_MULTI   BIT(4)  /* Set for multiple EOL irqs */
  42 #define CPCAP_REG_BPEOL_BIT_UNKNOWN3    BIT(3)
  43 #define CPCAP_REG_BPEOL_BIT_UNKNOWN2    BIT(2)
  44 #define CPCAP_REG_BPEOL_BIT_BATTDETEN   BIT(1)  /* Enable battery detect */
  45 #define CPCAP_REG_BPEOL_BIT_EOLSEL      BIT(0)  /* BPDET = 0, EOL = 1 */
  46
  47 /*
  48  * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030
  49  * coulomb counter registers rather than the mc13892 registers. Both twl6030
  50  * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892
  51  * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop
  52  * the coulomb counter like cpcap does. So for now, we use the twl6030 style
  53  * naming for the registers.
  54  */
  55 #define CPCAP_REG_CCC1_ACTIVE_MODE1     BIT(4)  /* Update rate */
  56 #define CPCAP_REG_CCC1_ACTIVE_MODE0     BIT(3)  /* Update rate */
  57 #define CPCAP_REG_CCC1_AUTOCLEAR        BIT(2)  /* Resets sample registers */
  58 #define CPCAP_REG_CCC1_CAL_EN           BIT(1)  /* Clears after write in 1s */
  59 #define CPCAP_REG_CCC1_PAUSE            BIT(0)  /* Stop counters, allow write */
  60 #define CPCAP_REG_CCC1_RESET_MASK       (CPCAP_REG_CCC1_AUTOCLEAR | \
  61                                          CPCAP_REG_CCC1_CAL_EN)
  62
  63 #define CPCAP_REG_CCCC2_RATE1           BIT(5)
  64 #define CPCAP_REG_CCCC2_RATE0           BIT(4)
  65 #define CPCAP_REG_CCCC2_ENABLE          BIT(3)
  66
  67 #define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS       250
  68
  69 #define CPCAP_BATTERY_EB41_HW4X_ID 0x9E
  70 #define CPCAP_BATTERY_BW8X_ID 0x98
  71
  72 enum {
  73         CPCAP_BATTERY_IIO_BATTDET,
  74         CPCAP_BATTERY_IIO_VOLTAGE,
  75         CPCAP_BATTERY_IIO_CHRG_CURRENT,
  76         CPCAP_BATTERY_IIO_BATT_CURRENT,
  77         CPCAP_BATTERY_IIO_NR,
  78 };
  79
  80 enum cpcap_battery_irq_action {
  81         CPCAP_BATTERY_IRQ_ACTION_NONE,
  82         CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE,
  83         CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW,
  84         CPCAP_BATTERY_IRQ_ACTION_POWEROFF,
  85 };
  86
  87 struct cpcap_interrupt_desc {
  88         const char *name;
  89         struct list_head node;
  90         int irq;
  91         enum cpcap_battery_irq_action action;
  92 };
  93
  94 struct cpcap_battery_config {
  95         int cd_factor;
  96         struct power_supply_info info;
  97         struct power_supply_battery_info bat;
  98 };
  99
 100 struct cpcap_coulomb_counter_data {
 101         s32 sample;             /* 24 or 32 bits */
 102         s32 accumulator;
 103         s16 offset;             /* 9 bits */
 104         s16 integrator;         /* 13 or 16 bits */
 105 };
 106
 107 enum cpcap_battery_state {
 108         CPCAP_BATTERY_STATE_PREVIOUS,
 109         CPCAP_BATTERY_STATE_LATEST,
 110         CPCAP_BATTERY_STATE_EMPTY,
 111         CPCAP_BATTERY_STATE_FULL,
 112         CPCAP_BATTERY_STATE_NR,
 113 };
 114
 115 struct cpcap_battery_state_data {
 116         int voltage;
 117         int current_ua;
 118         int counter_uah;
 119         int temperature;
 120         ktime_t time;
 121         struct cpcap_coulomb_counter_data cc;
 122 };
 123
 124 struct cpcap_battery_ddata {
 125         struct device *dev;
 126         struct regmap *reg;
 127         struct list_head irq_list;
 128         struct iio_channel *channels[CPCAP_BATTERY_IIO_NR];
 129         struct power_supply *psy;
 130         struct cpcap_battery_config config;
 131         struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR];
 132         u32 cc_lsb;             /* μAms per LSB */
 133         atomic_t active;
 134         int charge_full;
 135         int status;
 136         u16 vendor;
 137         bool check_nvmem;
 138         unsigned int is_full:1;
 139 };
 140
 141 #define CPCAP_NO_BATTERY        -400
 142
 143 static bool ignore_temperature_probe;
 144 module_param(ignore_temperature_probe, bool, 0660);
 145
 146 static struct cpcap_battery_state_data *
 147 cpcap_battery_get_state(struct cpcap_battery_ddata *ddata,
 148                         enum cpcap_battery_state state)
 149 {
 150         if (state >= CPCAP_BATTERY_STATE_NR)
 151                 return NULL;
 152
 153         return &ddata->state[state];
 154 }
 155
 156 static struct cpcap_battery_state_data *
 157 cpcap_battery_latest(struct cpcap_battery_ddata *ddata)
 158 {
 159         return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_LATEST);
 160 }
 161
 162 static struct cpcap_battery_state_data *
 163 cpcap_battery_previous(struct cpcap_battery_ddata *ddata)
 164 {
 165         return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_PREVIOUS);
 166 }
 167
 168 static struct cpcap_battery_state_data *
 169 cpcap_battery_get_empty(struct cpcap_battery_ddata *ddata)
 170 {
 171         return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_EMPTY);
 172 }
 173
 174 static struct cpcap_battery_state_data *
 175 cpcap_battery_get_full(struct cpcap_battery_ddata *ddata)
 176 {
 177         return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_FULL);
 178 }
 179
 180 static int cpcap_charger_battery_temperature(struct cpcap_battery_ddata *ddata,
 181                                              int *value)
 182 {
 183         struct iio_channel *channel;
 184         int error;
 185
 186         channel = ddata->channels[CPCAP_BATTERY_IIO_BATTDET];
 187         error = iio_read_channel_processed(channel, value);
 188         if (error < 0) {
 189                 if (!ignore_temperature_probe)
 190                         dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
 191                 *value = CPCAP_NO_BATTERY;
 192
 193                 return error;
 194         }
 195
 196         *value /= 100;
 197
 198         return 0;
 199 }
 200
 201 static int cpcap_battery_get_voltage(struct cpcap_battery_ddata *ddata)
 202 {
 203         struct iio_channel *channel;
 204         int error, value = 0;
 205
 206         channel = ddata->channels[CPCAP_BATTERY_IIO_VOLTAGE];
 207         error = iio_read_channel_processed(channel, &value);
 208         if (error < 0) {
 209                 dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
 210
 211                 return 0;
 212         }
 213
 214         return value * 1000;
 215 }
 216
 217 static int cpcap_battery_get_current(struct cpcap_battery_ddata *ddata)
 218 {
 219         struct iio_channel *channel;
 220         int error, value = 0;
 221
 222         channel = ddata->channels[CPCAP_BATTERY_IIO_BATT_CURRENT];
 223         error = iio_read_channel_processed(channel, &value);
 224         if (error < 0) {
 225                 dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
 226
 227                 return 0;
 228         }
 229
 230         return value * 1000;
 231 }
 232
 233 /**
 234  * cpcap_battery_cc_raw_div - calculate and divide coulomb counter μAms values
 235  * @ddata: device driver data
 236  * @sample: coulomb counter sample value
 237  * @accumulator: coulomb counter integrator value
 238  * @offset: coulomb counter offset value
 239  * @divider: conversion divider
 240  *
 241  * Note that cc_lsb and cc_dur values are from Motorola Linux kernel
 242  * function data_get_avg_curr_ua() and seem to be based on measured test
 243  * results. It also has the following comment:
 244  *
 245  * Adjustment factors are applied here as a temp solution per the test
 246  * results. Need to work out a formal solution for this adjustment.
 247  *
 248  * A coulomb counter for similar hardware seems to be documented in
 249  * "TWL6030 Gas Gauging Basics (Rev. A)" swca095a.pdf in chapter
 250  * "10 Calculating Accumulated Current". We however follow what the
 251  * Motorola mapphone Linux kernel is doing as there may be either a
 252  * TI or ST coulomb counter in the PMIC.
 253  */
 254 static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
 255                                     s32 sample, s32 accumulator,
 256                                     s16 offset, u32 divider)
 257 {
 258         s64 acc;
 259
 260         if (!divider)
 261                 return 0;
 262
 263         acc = accumulator;
 264         acc -= (s64)sample * offset;
 265         acc *= ddata->cc_lsb;
 266         acc *= -1;
 267         acc = div_s64(acc, divider);
 268
 269         return acc;
 270 }
 271
 272 /* 3600000μAms = 1μAh */
 273 static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata,
 274                                    s32 sample, s32 accumulator,
 275                                    s16 offset)
 276 {
 277         return cpcap_battery_cc_raw_div(ddata, sample,
 278                                         accumulator, offset,
 279                                         3600000);
 280 }
 281
 282 static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata,
 283                                   s32 sample, s32 accumulator,
 284                                   s16 offset)
 285 {
 286         return cpcap_battery_cc_raw_div(ddata, sample,
 287                                         accumulator, offset,
 288                                         sample *
 289                                         CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS);
 290 }
 291
 292 /**
 293  * cpcap_battery_read_accumulated - reads cpcap coulomb counter
 294  * @ddata: device driver data
 295  * @ccd: coulomb counter values
 296  *
 297  * Based on Motorola mapphone kernel function data_read_regs().
 298  * Looking at the registers, the coulomb counter seems similar to
 299  * the coulomb counter in TWL6030. See "TWL6030 Gas Gauging Basics
 300  * (Rev. A) swca095a.pdf for "10 Calculating Accumulated Current".
 301  *
 302  * Note that swca095a.pdf instructs to stop the coulomb counter
 303  * before reading to avoid values changing. Motorola mapphone
 304  * Linux kernel does not do it, so let's assume they've verified
 305  * the data produced is correct.
 306  */
 307 static int
 308 cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 309                                struct cpcap_coulomb_counter_data *ccd)
 310 {
 311         u16 buf[7];     /* CPCAP_REG_CCS1 to CCI */
 312         int error;
 313
 314         ccd->sample = 0;
 315         ccd->accumulator = 0;
 316         ccd->offset = 0;
 317         ccd->integrator = 0;
 318
 319         /* Read coulomb counter register range */
 320         error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1,
 321                                  buf, ARRAY_SIZE(buf));
 322         if (error)
 323                 return 0;
 324
 325         /* Sample value CPCAP_REG_CCS1 & 2 */
 326         ccd->sample = (buf[1] & 0x0fff) << 16;
 327         ccd->sample |= buf[0];
 328         if (ddata->vendor == CPCAP_VENDOR_TI)
 329                 ccd->sample = sign_extend32(24, ccd->sample);
 330
 331         /* Accumulator value CPCAP_REG_CCA1 & 2 */
 332         ccd->accumulator = ((s16)buf[3]) << 16;
 333         ccd->accumulator |= buf[2];
 334
 335         /*
 336          * Coulomb counter calibration offset is CPCAP_REG_CCM,
 337          * REG_CCO seems unused
 338          */
 339         ccd->offset = buf[4];
 340         ccd->offset = sign_extend32(ccd->offset, 9);
 341
 342         /* Integrator register CPCAP_REG_CCI */
 343         if (ddata->vendor == CPCAP_VENDOR_TI)
 344                 ccd->integrator = sign_extend32(buf[6], 13);
 345         else
 346                 ccd->integrator = (s16)buf[6];
 347
 348         return cpcap_battery_cc_to_uah(ddata,
 349                                        ccd->sample,
 350                                        ccd->accumulator,
 351                                        ccd->offset);
 352 }
 353
 354
 355 /*
 356  * Based on the values from Motorola mapphone Linux kernel for the
 357  * stock Droid 4 battery eb41. In the Motorola mapphone Linux
 358  * kernel tree the value for pm_cd_factor is passed to the kernel
 359  * via device tree. If it turns out to be something device specific
 360  * we can consider that too later. These values are also fine for
 361  * Bionic's hw4x.
 362  *
 363  * And looking at the battery full and shutdown values for the stock
 364  * kernel on droid 4, full is 4351000 and software initiates shutdown
 365  * at 3078000. The device will die around 2743000.
 366  */
 367 static const struct cpcap_battery_config cpcap_battery_eb41_data = {
 368         .cd_factor = 0x3cc,
 369         .info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
 370         .info.voltage_max_design = 4351000,
 371         .info.voltage_min_design = 3100000,
 372         .info.charge_full_design = 1740000,
 373         .bat.constant_charge_voltage_max_uv = 4200000,
 374 };
 375
 376 /* Values for the extended Droid Bionic battery bw8x. */
 377 static const struct cpcap_battery_config cpcap_battery_bw8x_data = {
 378         .cd_factor = 0x3cc,
 379         .info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
 380         .info.voltage_max_design = 4200000,
 381         .info.voltage_min_design = 3200000,
 382         .info.charge_full_design = 2760000,
 383         .bat.constant_charge_voltage_max_uv = 4200000,
 384 };
 385
 386 /*
 387  * Safe values for any lipo battery likely to fit into a mapphone
 388  * battery bay.
 389  */
 390 static const struct cpcap_battery_config cpcap_battery_unkown_data = {
 391         .cd_factor = 0x3cc,
 392         .info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
 393         .info.voltage_max_design = 4200000,
 394         .info.voltage_min_design = 3200000,
 395         .info.charge_full_design = 3000000,
 396         .bat.constant_charge_voltage_max_uv = 4200000,
 397 };
 398
 399 static int cpcap_battery_match_nvmem(struct device *dev, const void *data)
 400 {
 401         if (strcmp(dev_name(dev), "89-500029ba0f73") == 0)
 402                 return 1;
 403         else
 404                 return 0;
 405 }
 406
 407 static void cpcap_battery_detect_battery_type(struct cpcap_battery_ddata *ddata)
 408 {
 409         struct nvmem_device *nvmem;
 410         u8 battery_id = 0;
 411
 412         ddata->check_nvmem = false;
 413
 414         nvmem = nvmem_device_find(NULL, &cpcap_battery_match_nvmem);
 415         if (IS_ERR_OR_NULL(nvmem)) {
 416                 ddata->check_nvmem = true;
 417                 dev_info_once(ddata->dev, "Can not find battery nvmem device. Assuming generic lipo battery\n");
 418         } else if (nvmem_device_read(nvmem, 2, 1, &battery_id) < 0) {
 419                 battery_id = 0;
 420                 ddata->check_nvmem = true;
 421                 dev_warn(ddata->dev, "Can not read battery nvmem device. Assuming generic lipo battery\n");
 422         }
 423
 424         switch (battery_id) {
 425         case CPCAP_BATTERY_EB41_HW4X_ID:
 426                 ddata->config = cpcap_battery_eb41_data;
 427                 break;
 428         case CPCAP_BATTERY_BW8X_ID:
 429                 ddata->config = cpcap_battery_bw8x_data;
 430                 break;
 431         default:
 432                 ddata->config = cpcap_battery_unkown_data;
 433         }
 434 }
 435
 436 /**
 437  * cpcap_battery_cc_get_avg_current - read cpcap coulumb counter
 438  * @ddata: cpcap battery driver device data
 439  */
 440 static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata)
 441 {
 442         int value, acc, error;
 443         s32 sample;
 444         s16 offset;
 445
 446         /* Coulomb counter integrator */
 447         error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value);
 448         if (error)
 449                 return error;
 450
 451         if (ddata->vendor == CPCAP_VENDOR_TI) {
 452                 acc = sign_extend32(value, 13);
 453                 sample = 1;
 454         } else {
 455                 acc = (s16)value;
 456                 sample = 4;
 457         }
 458
 459         /* Coulomb counter calibration offset  */
 460         error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
 461         if (error)
 462                 return error;
 463
 464         offset = sign_extend32(value, 9);
 465
 466         return cpcap_battery_cc_to_ua(ddata, sample, acc, offset);
 467 }
 468
 469 static int cpcap_battery_get_charger_status(struct cpcap_battery_ddata *ddata,
 470                                             int *val)
 471 {
 472         union power_supply_propval prop;
 473         struct power_supply *charger;
 474         int error;
 475
 476         charger = power_supply_get_by_name("usb");
 477         if (!charger)
 478                 return -ENODEV;
 479
 480         error = power_supply_get_property(charger, POWER_SUPPLY_PROP_STATUS,
 481                                           &prop);
 482         if (error)
 483                 *val = POWER_SUPPLY_STATUS_UNKNOWN;
 484         else
 485                 *val = prop.intval;
 486
 487         power_supply_put(charger);
 488
 489         return error;
 490 }
 491
 492 static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata)
 493 {
 494         struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
 495         unsigned int vfull;
 496         int error, val;
 497
 498         error = cpcap_battery_get_charger_status(ddata, &val);
 499         if (!error) {
 500                 switch (val) {
 501                 case POWER_SUPPLY_STATUS_DISCHARGING:
 502                         dev_dbg(ddata->dev, "charger disconnected\n");
 503                         ddata->is_full = 0;
 504                         break;
 505                 case POWER_SUPPLY_STATUS_FULL:
 506                         dev_dbg(ddata->dev, "charger full status\n");
 507                         ddata->is_full = 1;
 508                         break;
 509                 default:
 510                         break;
 511                 }
 512         }
 513
 514         /*
 515          * The full battery voltage here can be inaccurate, it's used just to
 516          * filter out any trickle charging events. We clear the is_full status
 517          * on charger disconnect above anyways.
 518          */
 519         vfull = ddata->config.bat.constant_charge_voltage_max_uv - 120000;
 520
 521         if (ddata->is_full && state->voltage < vfull)
 522                 ddata->is_full = 0;
 523
 524         return ddata->is_full;
 525 }
 526
 527 static bool cpcap_battery_low(struct cpcap_battery_ddata *ddata)
 528 {
 529         struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
 530         static bool is_low;
 531
 532         if (state->current_ua > 0 && (state->voltage <= 3350000 || is_low))
 533                 is_low = true;
 534         else
 535                 is_low = false;
 536
 537         return is_low;
 538 }
 539
 540 static int cpcap_battery_update_status(struct cpcap_battery_ddata *ddata)
 541 {
 542         struct cpcap_battery_state_data state, *latest, *previous,
 543                                         *empty, *full;
 544         ktime_t now;
 545         int error;
 546
 547         memset(&state, 0, sizeof(state));
 548         now = ktime_get();
 549
 550         latest = cpcap_battery_latest(ddata);
 551         if (latest) {
 552                 s64 delta_ms = ktime_to_ms(ktime_sub(now, latest->time));
 553
 554                 if (delta_ms < CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS)
 555                         return delta_ms;
 556         }
 557
 558         state.time = now;
 559         state.voltage = cpcap_battery_get_voltage(ddata);
 560         state.current_ua = cpcap_battery_get_current(ddata);
 561         state.counter_uah = cpcap_battery_read_accumulated(ddata, &state.cc);
 562
 563         error = cpcap_charger_battery_temperature(ddata,
 564                                                   &state.temperature);
 565         if (error)
 566                 return error;
 567
 568         previous = cpcap_battery_previous(ddata);
 569         memcpy(previous, latest, sizeof(*previous));
 570         memcpy(latest, &state, sizeof(*latest));
 571
 572         if (cpcap_battery_full(ddata)) {
 573                 full = cpcap_battery_get_full(ddata);
 574                 memcpy(full, latest, sizeof(*full));
 575
 576                 empty = cpcap_battery_get_empty(ddata);
 577                 if (empty->voltage && empty->voltage != -1) {
 578                         empty->voltage = -1;
 579                         ddata->charge_full =
 580                                 empty->counter_uah - full->counter_uah;
 581                 } else if (ddata->charge_full) {
 582                         empty->voltage = -1;
 583                         empty->counter_uah =
 584                                 full->counter_uah + ddata->charge_full;
 585                 }
 586         } else if (cpcap_battery_low(ddata)) {
 587                 empty = cpcap_battery_get_empty(ddata);
 588                 memcpy(empty, latest, sizeof(*empty));
 589
 590                 full = cpcap_battery_get_full(ddata);
 591                 if (full->voltage) {
 592                         full->voltage = 0;
 593                         ddata->charge_full =
 594                                 empty->counter_uah - full->counter_uah;
 595                 }
 596         }
 597
 598         return 0;
 599 }
 600
 601 /*
 602  * Update battery status when cpcap-charger calls power_supply_changed().
 603  * This allows us to detect battery full condition before the charger
 604  * disconnects.
 605  */
 606 static void cpcap_battery_external_power_changed(struct power_supply *psy)
 607 {
 608         union power_supply_propval prop;
 609
 610         power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, &prop);
 611 }
 612
 613 static enum power_supply_property cpcap_battery_props[] = {
 614         POWER_SUPPLY_PROP_STATUS,
 615         POWER_SUPPLY_PROP_PRESENT,
 616         POWER_SUPPLY_PROP_TECHNOLOGY,
 617         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 618         POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 619         POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 620         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 621         POWER_SUPPLY_PROP_CURRENT_AVG,
 622         POWER_SUPPLY_PROP_CURRENT_NOW,
 623         POWER_SUPPLY_PROP_CHARGE_FULL,
 624         POWER_SUPPLY_PROP_CHARGE_NOW,
 625         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 626         POWER_SUPPLY_PROP_CHARGE_COUNTER,
 627         POWER_SUPPLY_PROP_POWER_NOW,
 628         POWER_SUPPLY_PROP_POWER_AVG,
 629         POWER_SUPPLY_PROP_CAPACITY,
 630         POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 631         POWER_SUPPLY_PROP_SCOPE,
 632         POWER_SUPPLY_PROP_TEMP,
 633 };
 634
 635 static int cpcap_battery_get_property(struct power_supply *psy,
 636                                       enum power_supply_property psp,
 637                                       union power_supply_propval *val)
 638 {
 639         struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
 640         struct cpcap_battery_state_data *latest, *previous, *empty;
 641         u32 sample;
 642         s32 accumulator;
 643         int cached;
 644         s64 tmp;
 645
 646         cached = cpcap_battery_update_status(ddata);
 647         if (cached < 0)
 648                 return cached;
 649
 650         latest = cpcap_battery_latest(ddata);
 651         previous = cpcap_battery_previous(ddata);
 652
 653         if (ddata->check_nvmem)
 654                 cpcap_battery_detect_battery_type(ddata);
 655
 656         switch (psp) {
 657         case POWER_SUPPLY_PROP_PRESENT:
 658                 if (latest->temperature > CPCAP_NO_BATTERY || ignore_temperature_probe)
 659                         val->intval = 1;
 660                 else
 661                         val->intval = 0;
 662                 break;
 663         case POWER_SUPPLY_PROP_STATUS:
 664                 if (cpcap_battery_full(ddata)) {
 665                         val->intval = POWER_SUPPLY_STATUS_FULL;
 666                         break;
 667                 }
 668                 if (cpcap_battery_cc_get_avg_current(ddata) < 0)
 669                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
 670                 else
 671                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 672                 break;
 673         case POWER_SUPPLY_PROP_TECHNOLOGY:
 674                 val->intval = ddata->config.info.technology;
 675                 break;
 676         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 677                 val->intval = cpcap_battery_get_voltage(ddata);
 678                 break;
 679         case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 680                 val->intval = ddata->config.info.voltage_max_design;
 681                 break;
 682         case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 683                 val->intval = ddata->config.info.voltage_min_design;
 684                 break;
 685         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 686                 val->intval = ddata->config.bat.constant_charge_voltage_max_uv;
 687                 break;
 688         case POWER_SUPPLY_PROP_CURRENT_AVG:
 689                 sample = latest->cc.sample - previous->cc.sample;
 690                 if (!sample) {
 691                         val->intval = cpcap_battery_cc_get_avg_current(ddata);
 692                         break;
 693                 }
 694                 accumulator = latest->cc.accumulator - previous->cc.accumulator;
 695                 val->intval = cpcap_battery_cc_to_ua(ddata, sample,
 696                                                      accumulator,
 697                                                      latest->cc.offset);
 698                 break;
 699         case POWER_SUPPLY_PROP_CURRENT_NOW:
 700                 val->intval = latest->current_ua;
 701                 break;
 702         case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 703                 val->intval = latest->counter_uah;
 704                 break;
 705         case POWER_SUPPLY_PROP_POWER_NOW:
 706                 tmp = (latest->voltage / 10000) * latest->current_ua;
 707                 val->intval = div64_s64(tmp, 100);
 708                 break;
 709         case POWER_SUPPLY_PROP_POWER_AVG:
 710                 sample = latest->cc.sample - previous->cc.sample;
 711                 if (!sample) {
 712                         tmp = cpcap_battery_cc_get_avg_current(ddata);
 713                         tmp *= (latest->voltage / 10000);
 714                         val->intval = div64_s64(tmp, 100);
 715                         break;
 716                 }
 717                 accumulator = latest->cc.accumulator - previous->cc.accumulator;
 718                 tmp = cpcap_battery_cc_to_ua(ddata, sample, accumulator,
 719                                              latest->cc.offset);
 720                 tmp *= ((latest->voltage + previous->voltage) / 20000);
 721                 val->intval = div64_s64(tmp, 100);
 722                 break;
 723         case POWER_SUPPLY_PROP_CAPACITY:
 724                 empty = cpcap_battery_get_empty(ddata);
 725                 if (!empty->voltage || !ddata->charge_full)
 726                         return -ENODATA;
 727                 /* (ddata->charge_full / 200) is needed for rounding */
 728                 val->intval = empty->counter_uah - latest->counter_uah +
 729                         ddata->charge_full / 200;
 730                 val->intval = clamp(val->intval, 0, ddata->charge_full);
 731                 val->intval = val->intval * 100 / ddata->charge_full;
 732                 break;
 733         case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 734                 if (cpcap_battery_full(ddata))
 735                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 736                 else if (latest->voltage >= 3750000)
 737                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
 738                 else if (latest->voltage >= 3300000)
 739                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 740                 else if (latest->voltage > 3100000)
 741                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 742                 else if (latest->voltage <= 3100000)
 743                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 744                 else
 745                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
 746                 break;
 747         case POWER_SUPPLY_PROP_CHARGE_NOW:
 748                 empty = cpcap_battery_get_empty(ddata);
 749                 if (!empty->voltage)
 750                         return -ENODATA;
 751                 val->intval = empty->counter_uah - latest->counter_uah;
 752                 if (val->intval < 0) {
 753                         /* Assume invalid config if CHARGE_NOW is -20% */
 754                         if (ddata->charge_full && abs(val->intval) > ddata->charge_full/5) {
 755                                 empty->voltage = 0;
 756                                 ddata->charge_full = 0;
 757                                 return -ENODATA;
 758                         }
 759                         val->intval = 0;
 760                 } else if (ddata->charge_full && ddata->charge_full < val->intval) {
 761                         /* Assume invalid config if CHARGE_NOW exceeds CHARGE_FULL by 20% */
 762                         if (val->intval > (6*ddata->charge_full)/5) {
 763                                 empty->voltage = 0;
 764                                 ddata->charge_full = 0;
 765                                 return -ENODATA;
 766                         }
 767                         val->intval = ddata->charge_full;
 768                 }
 769                 break;
 770         case POWER_SUPPLY_PROP_CHARGE_FULL:
 771                 if (!ddata->charge_full)
 772                         return -ENODATA;
 773                 val->intval = ddata->charge_full;
 774                 break;
 775         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 776                 val->intval = ddata->config.info.charge_full_design;
 777                 break;
 778         case POWER_SUPPLY_PROP_SCOPE:
 779                 val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
 780                 break;
 781         case POWER_SUPPLY_PROP_TEMP:
 782                 if (ignore_temperature_probe)
 783                         return -ENODATA;
 784                 val->intval = latest->temperature;
 785                 break;
 786         default:
 787                 return -EINVAL;
 788         }
 789
 790         return 0;
 791 }
 792
 793 static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata,
 794                                         int const_charge_voltage)
 795 {
 796         union power_supply_propval prop;
 797         union power_supply_propval val;
 798         struct power_supply *charger;
 799         int error;
 800
 801         charger = power_supply_get_by_name("usb");
 802         if (!charger)
 803                 return -ENODEV;
 804
 805         error = power_supply_get_property(charger,
 806                                 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 807                                 &prop);
 808         if (error)
 809                 goto out_put;
 810
 811         /* Allow charger const voltage lower than battery const voltage */
 812         if (const_charge_voltage > prop.intval)
 813                 goto out_put;
 814
 815         val.intval = const_charge_voltage;
 816
 817         error = power_supply_set_property(charger,
 818                         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 819                         &val);
 820 out_put:
 821         power_supply_put(charger);
 822
 823         return error;
 824 }
 825
 826 static int cpcap_battery_set_property(struct power_supply *psy,
 827                                       enum power_supply_property psp,
 828                                       const union power_supply_propval *val)
 829 {
 830         struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
 831
 832         switch (psp) {
 833         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 834                 if (val->intval < ddata->config.info.voltage_min_design)
 835                         return -EINVAL;
 836                 if (val->intval > ddata->config.info.voltage_max_design)
 837                         return -EINVAL;
 838
 839                 ddata->config.bat.constant_charge_voltage_max_uv = val->intval;
 840
 841                 return cpcap_battery_update_charger(ddata, val->intval);
 842         case POWER_SUPPLY_PROP_CHARGE_FULL:
 843                 if (val->intval < 0)
 844                         return -EINVAL;
 845                 if (val->intval > (6*ddata->config.info.charge_full_design)/5)
 846                         return -EINVAL;
 847
 848                 ddata->charge_full = val->intval;
 849
 850                 return 0;
 851         default:
 852                 return -EINVAL;
 853         }
 854
 855         return 0;
 856 }
 857
 858 static int cpcap_battery_property_is_writeable(struct power_supply *psy,
 859                                                enum power_supply_property psp)
 860 {
 861         switch (psp) {
 862         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 863         case POWER_SUPPLY_PROP_CHARGE_FULL:
 864                 return 1;
 865         default:
 866                 return 0;
 867         }
 868 }
 869
 870 static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 871 {
 872         struct cpcap_battery_ddata *ddata = data;
 873         struct cpcap_battery_state_data *latest;
 874         struct cpcap_interrupt_desc *d;
 875
 876         if (!atomic_read(&ddata->active))
 877                 return IRQ_NONE;
 878
 879         list_for_each_entry(d, &ddata->irq_list, node) {
 880                 if (irq == d->irq)
 881                         break;
 882         }
 883
 884         if (list_entry_is_head(d, &ddata->irq_list, node))
 885                 return IRQ_NONE;
 886
 887         latest = cpcap_battery_latest(ddata);
 888
 889         switch (d->action) {
 890         case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE:
 891                 dev_info(ddata->dev, "Coulomb counter calibration done\n");
 892                 break;
 893         case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
 894                 if (latest->current_ua >= 0)
 895                         dev_warn(ddata->dev, "Battery low at %imV!\n",
 896                                 latest->voltage / 1000);
 897                 break;
 898         case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
 899                 if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
 900                         dev_emerg(ddata->dev,
 901                                   "Battery empty at %imV, powering off\n",
 902                                   latest->voltage / 1000);
 903                         orderly_poweroff(true);
 904                 }
 905                 break;
 906         default:
 907                 break;
 908         }
 909
 910         power_supply_changed(ddata->psy);
 911
 912         return IRQ_HANDLED;
 913 }
 914
 915 static int cpcap_battery_init_irq(struct platform_device *pdev,
 916                                   struct cpcap_battery_ddata *ddata,
 917                                   const char *name)
 918 {
 919         struct cpcap_interrupt_desc *d;
 920         int irq, error;
 921
 922         irq = platform_get_irq_byname(pdev, name);
 923         if (irq < 0)
 924                 return irq;
 925
 926         error = devm_request_threaded_irq(ddata->dev, irq, NULL,
 927                                           cpcap_battery_irq_thread,
 928                                           IRQF_SHARED | IRQF_ONESHOT,
 929                                           name, ddata);
 930         if (error) {
 931                 dev_err(ddata->dev, "could not get irq %s: %i\n",
 932                         name, error);
 933
 934                 return error;
 935         }
 936
 937         d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
 938         if (!d)
 939                 return -ENOMEM;
 940
 941         d->name = name;
 942         d->irq = irq;
 943
 944         if (!strncmp(name, "cccal", 5))
 945                 d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE;
 946         else if (!strncmp(name, "lowbph", 6))
 947                 d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW;
 948         else if (!strncmp(name, "lowbpl", 6))
 949                 d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF;
 950
 951         list_add(&d->node, &ddata->irq_list);
 952
 953         return 0;
 954 }
 955
 956 static int cpcap_battery_init_interrupts(struct platform_device *pdev,
 957                                          struct cpcap_battery_ddata *ddata)
 958 {
 959         static const char * const cpcap_battery_irqs[] = {
 960                 "eol", "lowbph", "lowbpl",
 961                 "chrgcurr1", "battdetb"
 962         };
 963         int i, error;
 964
 965         for (i = 0; i < ARRAY_SIZE(cpcap_battery_irqs); i++) {
 966                 error = cpcap_battery_init_irq(pdev, ddata,
 967                                                cpcap_battery_irqs[i]);
 968                 if (error)
 969                         return error;
 970         }
 971
 972         /* Enable calibration interrupt if already available in dts */
 973         cpcap_battery_init_irq(pdev, ddata, "cccal");
 974
 975         /* Enable low battery interrupts for 3.3V high and 3.1V low */
 976         error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
 977                                    0xffff,
 978                                    CPCAP_REG_BPEOL_BIT_BATTDETEN);
 979         if (error)
 980                 return error;
 981
 982         return 0;
 983 }
 984
 985 static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata)
 986 {
 987         const char * const names[CPCAP_BATTERY_IIO_NR] = {
 988                 "battdetb", "battp", "chg_isense", "batti",
 989         };
 990         int error, i;
 991
 992         for (i = 0; i < CPCAP_BATTERY_IIO_NR; i++) {
 993                 ddata->channels[i] = devm_iio_channel_get(ddata->dev,
 994                                                           names[i]);
 995                 if (IS_ERR(ddata->channels[i])) {
 996                         error = PTR_ERR(ddata->channels[i]);
 997                         goto out_err;
 998                 }
 999
1000                 if (!ddata->channels[i]->indio_dev) {
1001                         error = -ENXIO;
1002                         goto out_err;
1003                 }
1004         }
1005
1006         return 0;
1007
1008 out_err:
1009         return dev_err_probe(ddata->dev, error,
1010                              "could not initialize VBUS or ID IIO\n");
1011 }
1012
1013 /* Calibrate coulomb counter */
1014 static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata)
1015 {
1016         int error, ccc1, value;
1017         unsigned long timeout;
1018
1019         error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1);
1020         if (error)
1021                 return error;
1022
1023         timeout = jiffies + msecs_to_jiffies(6000);
1024
1025         /* Start calibration */
1026         error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
1027                                    0xffff,
1028                                    CPCAP_REG_CCC1_CAL_EN);
1029         if (error)
1030                 goto restore;
1031
1032         while (time_before(jiffies, timeout)) {
1033                 error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value);
1034                 if (error)
1035                         goto restore;
1036
1037                 if (!(value & CPCAP_REG_CCC1_CAL_EN))
1038                         break;
1039
1040                 error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
1041                 if (error)
1042                         goto restore;
1043
1044                 msleep(300);
1045         }
1046
1047         /* Read calibration offset from CCM */
1048         error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
1049         if (error)
1050                 goto restore;
1051
1052         dev_info(ddata->dev, "calibration done: 0x%04x\n", value);
1053
1054 restore:
1055         if (error)
1056                 dev_err(ddata->dev, "%s: error %i\n", __func__, error);
1057
1058         error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
1059                                    0xffff, ccc1);
1060         if (error)
1061                 dev_err(ddata->dev, "%s: restore error %i\n",
1062                         __func__, error);
1063
1064         return error;
1065 }
1066
1067 #ifdef CONFIG_OF
1068 static const struct of_device_id cpcap_battery_id_table[] = {
1069         {
1070                 .compatible = "motorola,cpcap-battery",
1071         },
1072         {},
1073 };
1074 MODULE_DEVICE_TABLE(of, cpcap_battery_id_table);
1075 #endif
1076
1077 static const struct power_supply_desc cpcap_charger_battery_desc = {
1078         .name           = "battery",
1079         .type           = POWER_SUPPLY_TYPE_BATTERY,
1080         .properties     = cpcap_battery_props,
1081         .num_properties = ARRAY_SIZE(cpcap_battery_props),
1082         .get_property   = cpcap_battery_get_property,
1083         .set_property   = cpcap_battery_set_property,
1084         .property_is_writeable = cpcap_battery_property_is_writeable,
1085         .external_power_changed = cpcap_battery_external_power_changed,
1086 };
1087
1088 static int cpcap_battery_probe(struct platform_device *pdev)
1089 {
1090         struct cpcap_battery_ddata *ddata;
1091         struct power_supply_config psy_cfg = {};
1092         int error;
1093
1094         ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
1095         if (!ddata)
1096                 return -ENOMEM;
1097
1098         cpcap_battery_detect_battery_type(ddata);
1099
1100         INIT_LIST_HEAD(&ddata->irq_list);
1101         ddata->dev = &pdev->dev;
1102
1103         ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
1104         if (!ddata->reg)
1105                 return -ENODEV;
1106
1107         error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor);
1108         if (error)
1109                 return error;
1110
1111         switch (ddata->vendor) {
1112         case CPCAP_VENDOR_ST:
1113                 ddata->cc_lsb = 95374;  /* μAms per LSB */
1114                 break;
1115         case CPCAP_VENDOR_TI:
1116                 ddata->cc_lsb = 91501;  /* μAms per LSB */
1117                 break;
1118         default:
1119                 return -EINVAL;
1120         }
1121         ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000;
1122
1123         platform_set_drvdata(pdev, ddata);
1124
1125         error = cpcap_battery_init_interrupts(pdev, ddata);
1126         if (error)
1127                 return error;
1128
1129         error = cpcap_battery_init_iio(ddata);
1130         if (error)
1131                 return error;
1132
1133         psy_cfg.of_node = pdev->dev.of_node;
1134         psy_cfg.drv_data = ddata;
1135
1136         ddata->psy = devm_power_supply_register(ddata->dev,
1137                                                 &cpcap_charger_battery_desc,
1138                                                 &psy_cfg);
1139         error = PTR_ERR_OR_ZERO(ddata->psy);
1140         if (error) {
1141                 dev_err(ddata->dev, "failed to register power supply\n");
1142                 return error;
1143         }
1144
1145         atomic_set(&ddata->active, 1);
1146
1147         error = cpcap_battery_calibrate(ddata);
1148         if (error)
1149                 return error;
1150
1151         return 0;
1152 }
1153
1154 static void cpcap_battery_remove(struct platform_device *pdev)
1155 {
1156         struct cpcap_battery_ddata *ddata = platform_get_drvdata(pdev);
1157         int error;
1158
1159         atomic_set(&ddata->active, 0);
1160         error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
1161                                    0xffff, 0);
1162         if (error)
1163                 dev_err(&pdev->dev, "could not disable: %i\n", error);
1164 }
1165
1166 static struct platform_driver cpcap_battery_driver = {
1167         .driver = {
1168                 .name           = "cpcap_battery",
1169                 .of_match_table = of_match_ptr(cpcap_battery_id_table),
1170         },
1171         .probe  = cpcap_battery_probe,
1172         .remove_new = cpcap_battery_remove,
1173 };
1174 module_platform_driver(cpcap_battery_driver);
1175
1176 MODULE_LICENSE("GPL v2");
1177 MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
1178 MODULE_DESCRIPTION("CPCAP PMIC Battery Driver");