drivers/power/supply/bq2515x_charger.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 // BQ2515X Battery Charger Driver
   3 // Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
   4
   5 #include <linux/err.h>
   6 #include <linux/i2c.h>
   7 #include <linux/init.h>
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <linux/gpio/consumer.h>
  11 #include <linux/power_supply.h>
  12 #include <linux/regmap.h>
  13 #include <linux/types.h>
  14
  15 #define BQ2515X_MANUFACTURER "Texas Instruments"
  16
  17 #define BQ2515X_STAT0           0x00
  18 #define BQ2515X_STAT1           0x01
  19 #define BQ2515X_STAT2           0x02
  20 #define BQ2515X_FLAG0           0x03
  21 #define BQ2515X_FLAG1           0x04
  22 #define BQ2515X_FLAG2           0x05
  23 #define BQ2515X_FLAG3           0x06
  24 #define BQ2515X_MASK0           0x07
  25 #define BQ2515X_MASK1           0x08
  26 #define BQ2515X_MASK2           0x09
  27 #define BQ2515X_MASK3           0x0a
  28 #define BQ2515X_VBAT_CTRL       0x12
  29 #define BQ2515X_ICHG_CTRL       0x13
  30 #define BQ2515X_PCHRGCTRL       0x14
  31 #define BQ2515X_TERMCTRL        0x15
  32 #define BQ2515X_BUVLO           0x16
  33 #define BQ2515X_CHARGERCTRL0    0x17
  34 #define BQ2515X_CHARGERCTRL1    0x18
  35 #define BQ2515X_ILIMCTRL        0x19
  36 #define BQ2515X_LDOCTRL         0x1d
  37 #define BQ2515X_MRCTRL          0x30
  38 #define BQ2515X_ICCTRL0         0x35
  39 #define BQ2515X_ICCTRL1         0x36
  40 #define BQ2515X_ICCTRL2         0x37
  41 #define BQ2515X_ADCCTRL0        0x40
  42 #define BQ2515X_ADCCTRL1        0x41
  43 #define BQ2515X_ADC_VBAT_M      0x42
  44 #define BQ2515X_ADC_VBAT_L      0x43
  45 #define BQ2515X_ADC_TS_M        0x44
  46 #define BQ2515X_ADC_TS_L        0x45
  47 #define BQ2515X_ADC_ICHG_M      0x46
  48 #define BQ2515X_ADC_ICHG_L      0x47
  49 #define BQ2515X_ADC_ADCIN_M     0x48
  50 #define BQ2515X_ADC_ADCIN_L     0x49
  51 #define BQ2515X_ADC_VIN_M       0x4a
  52 #define BQ2515X_ADC_VIN_L       0x4b
  53 #define BQ2515X_ADC_PMID_M      0x4c
  54 #define BQ2515X_ADC_PMID_L      0x4d
  55 #define BQ2515X_ADC_IIN_M       0x4e
  56 #define BQ2515X_ADC_IIN_L       0x4f
  57 #define BQ2515X_ADC_COMP1_M     0x52
  58 #define BQ2515X_ADC_COMP1_L     0X53
  59 #define BQ2515X_ADC_COMP2_M     0X54
  60 #define BQ2515X_ADC_COMP2_L     0x55
  61 #define BQ2515X_ADC_COMP3_M     0x56
  62 #define BQ2515X_ADC_COMP3_L     0x57
  63 #define BQ2515X_ADC_READ_EN     0x58
  64 #define BQ2515X_TS_FASTCHGCTRL  0x61
  65 #define BQ2515X_TS_COLD         0x62
  66 #define BQ2515X_TS_COOL         0x63
  67 #define BQ2515X_TS_WARM         0x64
  68 #define BQ2515X_TS_HOT          0x65
  69 #define BQ2515X_DEVICE_ID       0x6f
  70
  71 #define BQ2515X_DEFAULT_ICHG_UA         10000
  72 #define BQ25150_DEFAULT_ILIM_UA         100000
  73 #define BQ25155_DEFAULT_ILIM_UA         500000
  74 #define BQ2515X_DEFAULT_VBAT_REG_UV     4200000
  75 #define BQ2515X_DEFAULT_IPRECHARGE_UA   2500
  76
  77 #define BQ2515X_DIVISOR                         65536
  78 #define BQ2515X_VBAT_BASE_VOLT                  3600000
  79 #define BQ2515X_VBAT_REG_MAX                    4600000
  80 #define BQ2515X_VBAT_REG_MIN                    3600000
  81 #define BQ2515X_VBAT_STEP_UV                    10000
  82 #define BQ2515X_UV_FACTOR                       1000000
  83 #define BQ2515X_VBAT_MULTIPLIER                 6
  84 #define BQ2515X_ICHG_DIVISOR                    52429
  85 #define BQ2515X_ICHG_CURR_STEP_THRESH_UA        318750
  86 #define BQ2515X_ICHG_MIN_UA                     0
  87 #define BQ2515X_ICHG_MAX_UA                     500000
  88 #define BQ2515X_ICHG_RNG_1B0_UA                 1250
  89 #define BQ2515X_ICHG_RNG_1B1_UA                 2500
  90 #define BQ2515X_VLOWV_SEL_1B0_UV                3000000
  91 #define BQ2515X_VLOWV_SEL_1B1_UV                2800000
  92 #define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA      18750
  93 #define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA      37500
  94 #define BQ2515X_TWAKE2_MIN_US                   1700000
  95 #define BQ2515X_TWAKE2_MAX_US                   2300000
  96
  97 #define BQ2515X_ILIM_150MA      0x2
  98 #define BQ2515X_ILIM_MASK       0x7
  99 #define BQ2515X_ILIM_MIN        50000
 100 #define BQ2515X_ILIM_MAX        600000
 101 #define BQ2515X_HEALTH_MASK     0xf
 102 #define BQ2515X_ICHGRNG_MASK    0x80
 103 #define BQ2515X_STAT0_MASK      0x0f
 104 #define BQ2515X_STAT1_MASK      0x1f
 105 #define BQ2515X_PRECHARGE_MASK  0x1f
 106
 107 #define BQ2515X_TS_HOT_STAT             BIT(0)
 108 #define BQ2515X_TS_WARM_STAT            BIT(1)
 109 #define BQ2515X_TS_COOL_STAT            BIT(2)
 110 #define BQ2515X_TS_COLD_STAT            BIT(3)
 111 #define BQ2515X_SAFETY_TIMER_EXP        BIT(5)
 112
 113 #define BQ2515X_EN_VBAT_READ            BIT(3)
 114 #define BQ2515X_EN_ICHG_READ            BIT(5)
 115
 116 #define BQ2515X_VIN_GOOD                BIT(0)
 117 #define BQ2515X_CHRG_DONE               BIT(5)
 118 #define BQ2515X_CV_CHRG_MODE            BIT(6)
 119
 120 #define BQ2515X_VIN_OVP_FAULT_STAT      BIT(7)
 121
 122 #define BQ2515X_WATCHDOG_DISABLE        BIT(4)
 123
 124 #define BQ2515X_ICHARGE_RANGE           BIT(7)
 125
 126 #define BQ2515X_VLOWV_SEL               BIT(5)
 127
 128 #define BQ2515X_CHARGER_DISABLE         BIT(0)
 129
 130 #define BQ2515X_HWRESET_14S_WD          BIT(1)
 131
 132 static const int bq2515x_ilim_lvl_values[] = {
 133         50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
 134 };
 135
 136 /**
 137  * struct bq2515x_init_data -
 138  * @ilim: input current limit
 139  * @ichg: fast charge current
 140  * @vbatreg: battery regulation voltage
 141  * @iprechg: precharge current
 142  */
 143 struct bq2515x_init_data {
 144         int ilim;
 145         int ichg;
 146         int vbatreg;
 147         int iprechg;
 148 };
 149
 150 enum bq2515x_id {
 151         BQ25150,
 152         BQ25155,
 153 };
 154
 155 /**
 156  * struct bq2515x_device -
 157  * @mains: mains properties
 158  * @battery: battery properties
 159  * @regmap: register map structure
 160  * @dev: device structure
 161  *
 162  * @reset_gpio: manual reset (MR) pin
 163  * @powerdown_gpio: low power mode pin
 164  * @ac_detect_gpio: power good (PG) pin
 165  * @ce_gpio: charge enable (CE) pin
 166  *
 167  * @model_name: string value describing device model
 168  * @device_id: value of device_id
 169  * @mains_online: boolean value indicating power supply online
 170  *
 171  * @init_data: charger initialization data structure
 172  */
 173 struct bq2515x_device {
 174         struct power_supply *mains;
 175         struct power_supply *battery;
 176         struct regmap *regmap;
 177         struct device *dev;
 178
 179         struct gpio_desc *reset_gpio;
 180         struct gpio_desc *powerdown_gpio;
 181         struct gpio_desc *ac_detect_gpio;
 182         struct gpio_desc *ce_gpio;
 183
 184         char model_name[I2C_NAME_SIZE];
 185         int device_id;
 186         bool mains_online;
 187
 188         struct bq2515x_init_data init_data;
 189 };
 190
 191 static const struct reg_default bq25150_reg_defaults[] = {
 192         {BQ2515X_FLAG0, 0x0},
 193         {BQ2515X_FLAG1, 0x0},
 194         {BQ2515X_FLAG2, 0x0},
 195         {BQ2515X_FLAG3, 0x0},
 196         {BQ2515X_MASK0, 0x0},
 197         {BQ2515X_MASK1, 0x0},
 198         {BQ2515X_MASK2, 0x71},
 199         {BQ2515X_MASK3, 0x0},
 200         {BQ2515X_VBAT_CTRL, 0x3C},
 201         {BQ2515X_ICHG_CTRL, 0x8},
 202         {BQ2515X_PCHRGCTRL, 0x2},
 203         {BQ2515X_TERMCTRL, 0x14},
 204         {BQ2515X_BUVLO, 0x0},
 205         {BQ2515X_CHARGERCTRL0, 0x82},
 206         {BQ2515X_CHARGERCTRL1, 0x42},
 207         {BQ2515X_ILIMCTRL, 0x1},
 208         {BQ2515X_LDOCTRL, 0xB0},
 209         {BQ2515X_MRCTRL, 0x2A},
 210         {BQ2515X_ICCTRL0, 0x10},
 211         {BQ2515X_ICCTRL1, 0x0},
 212         {BQ2515X_ICCTRL2, 0x0},
 213         {BQ2515X_ADCCTRL0, 0x2},
 214         {BQ2515X_ADCCTRL1, 0x40},
 215         {BQ2515X_ADC_COMP1_M, 0x23},
 216         {BQ2515X_ADC_COMP1_L, 0x20},
 217         {BQ2515X_ADC_COMP2_M, 0x38},
 218         {BQ2515X_ADC_COMP2_L, 0x90},
 219         {BQ2515X_ADC_COMP3_M, 0x0},
 220         {BQ2515X_ADC_COMP3_L, 0x0},
 221         {BQ2515X_ADC_READ_EN, 0x0},
 222         {BQ2515X_TS_FASTCHGCTRL, 0x34},
 223         {BQ2515X_TS_COLD, 0x7C},
 224         {BQ2515X_TS_COOL, 0x6D},
 225         {BQ2515X_TS_WARM, 0x38},
 226         {BQ2515X_TS_HOT, 0x27},
 227         {BQ2515X_DEVICE_ID, 0x20},
 228 };
 229
 230 static const struct reg_default bq25155_reg_defaults[] = {
 231         {BQ2515X_FLAG0, 0x0},
 232         {BQ2515X_FLAG1, 0x0},
 233         {BQ2515X_FLAG2, 0x0},
 234         {BQ2515X_FLAG3, 0x0},
 235         {BQ2515X_MASK0, 0x0},
 236         {BQ2515X_MASK1, 0x0},
 237         {BQ2515X_MASK2, 0x71},
 238         {BQ2515X_MASK3, 0x0},
 239         {BQ2515X_VBAT_CTRL, 0x3C},
 240         {BQ2515X_ICHG_CTRL, 0x8},
 241         {BQ2515X_PCHRGCTRL, 0x2},
 242         {BQ2515X_TERMCTRL, 0x14},
 243         {BQ2515X_BUVLO, 0x0},
 244         {BQ2515X_CHARGERCTRL0, 0x82},
 245         {BQ2515X_CHARGERCTRL1, 0xC2},
 246         {BQ2515X_ILIMCTRL, 0x6},
 247         {BQ2515X_LDOCTRL, 0xB0},
 248         {BQ2515X_MRCTRL, 0x2A},
 249         {BQ2515X_ICCTRL0, 0x10},
 250         {BQ2515X_ICCTRL1, 0x0},
 251         {BQ2515X_ICCTRL2, 0x40},
 252         {BQ2515X_ADCCTRL0, 0x2},
 253         {BQ2515X_ADCCTRL1, 0x40},
 254         {BQ2515X_ADC_COMP1_M, 0x23},
 255         {BQ2515X_ADC_COMP1_L, 0x20},
 256         {BQ2515X_ADC_COMP2_M, 0x38},
 257         {BQ2515X_ADC_COMP2_L, 0x90},
 258         {BQ2515X_ADC_COMP3_M, 0x0},
 259         {BQ2515X_ADC_COMP3_L, 0x0},
 260         {BQ2515X_ADC_READ_EN, 0x0},
 261         {BQ2515X_TS_FASTCHGCTRL, 0x34},
 262         {BQ2515X_TS_COLD, 0x7C},
 263         {BQ2515X_TS_COOL, 0x6D},
 264         {BQ2515X_TS_WARM, 0x38},
 265         {BQ2515X_TS_HOT, 0x27},
 266         {BQ2515X_DEVICE_ID, 0x35},
 267 };
 268
 269 static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
 270 {
 271         int ret;
 272         int val;
 273
 274         /* Read the STAT register if we can read it then the device is out
 275          * of ship mode.  If the register cannot be read then attempt to wake
 276          * it up and enable the ADC.
 277          */
 278         ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
 279         if (ret)
 280                 return ret;
 281
 282         /* Need to toggle LP and bring device out of ship mode. The device
 283          * will exit the ship mode when the MR pin is held low for at least
 284          * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
 285          */
 286         gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
 287
 288         gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
 289         usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
 290         gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
 291
 292         return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
 293                                 (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
 294 }
 295
 296 static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
 297 {
 298         bool dc = false;
 299         unsigned int val;
 300         int ret;
 301
 302         if (bq2515x->ac_detect_gpio)
 303                 val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
 304         else {
 305                 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
 306                 if (ret)
 307                         return ret;
 308         }
 309
 310         dc = val & BQ2515X_VIN_GOOD;
 311
 312         ret = bq2515x->mains_online != dc;
 313
 314         bq2515x->mains_online = dc;
 315
 316         return ret;
 317 }
 318
 319 static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
 320 {
 321         int ret;
 322
 323         ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
 324                         BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
 325         if (ret)
 326                 return ret;
 327
 328         return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
 329                                                 BQ2515X_HWRESET_14S_WD, 0);
 330 }
 331
 332 static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
 333 {
 334         int ret;
 335         int vbat_msb;
 336         int vbat_lsb;
 337         uint32_t vbat_measurement;
 338
 339         if (!bq2515x->mains_online)
 340                 bq2515x_wake_up(bq2515x);
 341
 342         ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
 343         if (ret)
 344                 return ret;
 345
 346         ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
 347         if (ret)
 348                 return ret;
 349
 350         vbat_measurement = (vbat_msb << 8) | vbat_lsb;
 351
 352         return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
 353                                                 BQ2515X_VBAT_MULTIPLIER;
 354 }
 355
 356 static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
 357 {
 358         int ret;
 359         int ichg_msb;
 360         int ichg_lsb;
 361         uint32_t ichg_measurement;
 362         u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 363         unsigned int ichg_reg_code, reg_code;
 364         unsigned int icharge_range = 0, pchrgctrl;
 365         unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
 366
 367         if (!bq2515x->mains_online)
 368                 return -ENODATA;
 369
 370         ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
 371         if (ret)
 372                 return ret;
 373
 374         ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
 375         if (ret)
 376                 return ret;
 377
 378         ichg_measurement = (ichg_msb << 8) | ichg_lsb;
 379
 380         ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
 381         if (ret)
 382                 return ret;
 383
 384         vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
 385
 386         if (vlowv_sel)
 387                 vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
 388
 389         if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
 390                 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
 391                                                                 &pchrgctrl);
 392                 if (ret)
 393                         return ret;
 394
 395                 reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
 396         } else {
 397                 ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
 398                                                         &ichg_reg_code);
 399                 if (ret)
 400                         return ret;
 401
 402                 reg_code = ichg_reg_code;
 403         }
 404
 405         ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
 406         if (ret)
 407                 return ret;
 408
 409         icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
 410
 411         if (icharge_range)
 412                 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
 413
 414         return reg_code * (ichg_multiplier * ichg_measurement /
 415                                                         BQ2515X_ICHG_DIVISOR);
 416 }
 417
 418 static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
 419 {
 420         int ret;
 421         int ce_pin;
 422         int icctrl2;
 423         int charger_disable;
 424
 425         ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
 426
 427         ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
 428         if (ret)
 429                 return ret;
 430
 431         charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
 432
 433         if (charger_disable || ce_pin)
 434                 return true;
 435
 436         return false;
 437 }
 438
 439 static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
 440 {
 441         gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
 442
 443         return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
 444                                         BQ2515X_CHARGER_DISABLE, val);
 445 }
 446
 447 static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
 448 {
 449         int ret;
 450         u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 451         unsigned int ichg_reg_code;
 452         unsigned int pchrgctrl;
 453         unsigned int icharge_range;
 454
 455         ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
 456         if (ret)
 457                 return ret;
 458
 459         ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
 460         if (ret)
 461                 return ret;
 462
 463         icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
 464
 465         if (icharge_range)
 466                 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
 467
 468         return ichg_reg_code * ichg_multiplier;
 469 }
 470
 471 static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
 472                                                                 int val)
 473 {
 474         int ret;
 475         unsigned int ichg_reg_code;
 476         u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 477         unsigned int icharge_range = 0;
 478
 479         if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
 480                 return -EINVAL;
 481
 482         if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
 483                 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
 484                 icharge_range = BQ2515X_ICHARGE_RANGE;
 485         }
 486
 487         bq2515x_set_charge_disable(bq2515x, 1);
 488
 489         ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
 490                                         BQ2515X_ICHARGE_RANGE, icharge_range);
 491         if (ret)
 492                 return ret;
 493
 494         ichg_reg_code = val / ichg_multiplier;
 495
 496         ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
 497         if (ret)
 498                 return ret;
 499
 500         return bq2515x_set_charge_disable(bq2515x, 0);
 501 }
 502
 503 static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
 504 {
 505         int ret;
 506         unsigned int pchrgctrl;
 507         unsigned int icharge_range;
 508         u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 509         unsigned int precharge_reg_code;
 510
 511         ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
 512         if (ret)
 513                 return ret;
 514
 515         icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
 516
 517         if (icharge_range)
 518                 precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
 519
 520         precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
 521
 522         return precharge_reg_code * precharge_multiplier;
 523 }
 524
 525 static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
 526                                         int val)
 527 {
 528         int ret;
 529         unsigned int pchrgctrl;
 530         unsigned int icharge_range;
 531         unsigned int precharge_reg_code;
 532         unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 533         unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
 534
 535         ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
 536         if (ret)
 537                 return ret;
 538
 539         icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
 540
 541         if (icharge_range) {
 542                 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
 543                 precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
 544         } else {
 545                 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
 546                 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
 547         }
 548         if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
 549                 return -EINVAL;
 550
 551         precharge_reg_code = val / precharge_multiplier;
 552
 553         ret = bq2515x_set_charge_disable(bq2515x, 1);
 554         if (ret)
 555                 return ret;
 556
 557         ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
 558                                 BQ2515X_PRECHARGE_MASK, precharge_reg_code);
 559         if (ret)
 560                 return ret;
 561
 562         return bq2515x_set_charge_disable(bq2515x, 0);
 563 }
 564
 565 static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
 566                                    union power_supply_propval *val)
 567 {
 568         bool status0_no_fault;
 569         bool status1_no_fault;
 570         bool ce_status;
 571         bool charge_done;
 572         unsigned int status;
 573         int ret;
 574
 575         if (!bq2515x->mains_online) {
 576                 val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 577                 return 0;
 578         }
 579
 580         ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
 581         if (ret)
 582                 return ret;
 583
 584         /*
 585          * The code block below is used to determine if any faults from the
 586          * STAT0 register are disbaling charging or if the charge has completed
 587          * according to the CHARGE_DONE_STAT bit.
 588          */
 589         if (((status & BQ2515X_STAT0_MASK) == true) &
 590                         ((status & BQ2515X_CHRG_DONE) == false)) {
 591                 status0_no_fault = true;
 592                 charge_done = false;
 593         } else if (status & BQ2515X_CHRG_DONE) {
 594                 charge_done = true;
 595                 status0_no_fault = false;
 596         } else {
 597                 status0_no_fault = false;
 598                 charge_done = false;
 599         }
 600
 601         ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
 602         if (ret)
 603                 return ret;
 604         /*
 605          * The code block below is used to determine if any faults from the
 606          * STAT1 register are disbaling charging
 607          */
 608         if ((status & BQ2515X_STAT1_MASK) == false)
 609                 status1_no_fault = true;
 610         else
 611                 status1_no_fault = false;
 612
 613         ce_status = (!bq2515x_get_charge_disable(bq2515x));
 614
 615         /*
 616          * If there are no faults and charging is enabled, then status is
 617          * charging. Otherwise, if charging is complete, then status is full.
 618          * Otherwise, if a fault exists or charging is disabled, then status is
 619          * not charging
 620          */
 621         if (status0_no_fault & status1_no_fault & ce_status)
 622                 val->intval = POWER_SUPPLY_STATUS_CHARGING;
 623         else if (charge_done)
 624                 val->intval = POWER_SUPPLY_STATUS_FULL;
 625         else if (!(status0_no_fault & status1_no_fault & ce_status))
 626                 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 627
 628         return 0;
 629 }
 630
 631 static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
 632 {
 633         int vbat_reg_code;
 634         int ret;
 635
 636         ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
 637         if (ret)
 638                 return ret;
 639
 640         return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
 641 }
 642
 643 static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
 644 {
 645         int vbat_reg_code;
 646
 647         if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
 648                 return -EINVAL;
 649
 650         vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
 651
 652         return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
 653 }
 654
 655 static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
 656 {
 657         int ret;
 658         int ilimctrl;
 659
 660         ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
 661         if (ret)
 662                 return ret;
 663
 664         return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
 665 }
 666
 667 static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
 668 {
 669         int i = 0;
 670         unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
 671
 672         for (i = array_size - 1; i > 0; i--) {
 673                 if (val >= bq2515x_ilim_lvl_values[i])
 674                         break;
 675         }
 676         return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
 677 }
 678
 679 static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
 680                                         enum power_supply_property prop)
 681 {
 682         switch (prop) {
 683         case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 684         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 685         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 686         case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
 687                 return true;
 688         default:
 689                 return false;
 690         }
 691 }
 692
 693 static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
 694                                       union power_supply_propval *val)
 695 {
 696         int health = POWER_SUPPLY_HEALTH_GOOD;
 697         int ret;
 698         unsigned int stat1;
 699         unsigned int flag3;
 700
 701         if (!bq2515x->mains_online)
 702                 bq2515x_wake_up(bq2515x);
 703
 704         ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
 705         if (ret)
 706                 return ret;
 707
 708         ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
 709         if (ret)
 710                 return ret;
 711
 712         if (stat1 & BQ2515X_HEALTH_MASK) {
 713                 switch (stat1 & BQ2515X_HEALTH_MASK) {
 714                 case BQ2515X_TS_HOT_STAT:
 715                         health = POWER_SUPPLY_HEALTH_HOT;
 716                         break;
 717                 case BQ2515X_TS_WARM_STAT:
 718                         health = POWER_SUPPLY_HEALTH_WARM;
 719                         break;
 720                 case BQ2515X_TS_COOL_STAT:
 721                         health = POWER_SUPPLY_HEALTH_COOL;
 722                         break;
 723                 case BQ2515X_TS_COLD_STAT:
 724                         health = POWER_SUPPLY_HEALTH_COLD;
 725                         break;
 726                 default:
 727                         health = POWER_SUPPLY_HEALTH_UNKNOWN;
 728                         break;
 729                 }
 730         }
 731
 732         if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
 733                 health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 734
 735         if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
 736                 health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
 737
 738         val->intval = health;
 739         return 0;
 740 }
 741
 742 static int bq2515x_mains_set_property(struct power_supply *psy,
 743                 enum power_supply_property prop,
 744                 const union power_supply_propval *val)
 745 {
 746         struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
 747         int ret;
 748
 749         switch (prop) {
 750         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 751                 ret = bq2515x_set_batt_reg(bq2515x, val->intval);
 752                 break;
 753
 754         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 755                 ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
 756                 break;
 757
 758         case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 759                 ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
 760                 break;
 761
 762         case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
 763                 ret = bq2515x_set_precharge_current(bq2515x, val->intval);
 764                 break;
 765
 766         default:
 767                 return -EINVAL;
 768         }
 769
 770         return ret;
 771 }
 772
 773 static int bq2515x_mains_get_property(struct power_supply *psy,
 774                                      enum power_supply_property prop,
 775                                      union power_supply_propval *val)
 776 {
 777         struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
 778         int ret = 0;
 779
 780         switch (prop) {
 781
 782         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 783                 ret = bq2515x_get_const_charge_current(bq2515x);
 784                 if (ret < 0)
 785                         return ret;
 786
 787                 val->intval = ret;
 788                 break;
 789
 790         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 791                 ret = bq2515x_get_batt_reg(bq2515x);
 792                 if (ret < 0)
 793                         return ret;
 794                 val->intval = ret;
 795                 break;
 796
 797         case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
 798                 ret = bq2515x_get_precharge_current(bq2515x);
 799                 if (ret < 0)
 800                         return ret;
 801                 val->intval = ret;
 802                 break;
 803
 804         case POWER_SUPPLY_PROP_ONLINE:
 805                 val->intval = bq2515x->mains_online;
 806                 break;
 807
 808         case POWER_SUPPLY_PROP_HEALTH:
 809                 ret = bq2515x_charger_get_health(bq2515x, val);
 810                 if (ret)
 811                         val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
 812                 break;
 813
 814         case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 815                 ret = bq2515x_get_ilim_lvl(bq2515x);
 816                 if (ret < 0)
 817                         return ret;
 818                 val->intval = ret;
 819                 break;
 820
 821         case POWER_SUPPLY_PROP_MODEL_NAME:
 822                 val->strval = bq2515x->model_name;
 823                 break;
 824
 825         case POWER_SUPPLY_PROP_MANUFACTURER:
 826                 val->strval = BQ2515X_MANUFACTURER;
 827                 break;
 828
 829         case POWER_SUPPLY_PROP_STATUS:
 830                 ret = bq2515x_charging_status(bq2515x, val);
 831                 if (ret)
 832                         return ret;
 833                 break;
 834
 835         default:
 836                 return -EINVAL;
 837         }
 838
 839         return ret;
 840 }
 841
 842 static int bq2515x_battery_get_property(struct power_supply *psy,
 843                                        enum power_supply_property prop,
 844                                        union power_supply_propval *val)
 845 {
 846         struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
 847         int ret;
 848
 849         ret = bq2515x_update_ps_status(bq2515x);
 850         if (ret)
 851                 return ret;
 852
 853         switch (prop) {
 854
 855         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 856                 ret = bq2515x->init_data.vbatreg;
 857                 if (ret < 0)
 858                         return ret;
 859                 val->intval = ret;
 860                 break;
 861
 862         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 863                 ret = bq2515x->init_data.ichg;
 864                 if (ret < 0)
 865                         return ret;
 866                 val->intval = ret;
 867                 break;
 868
 869         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 870                 ret = bq2515x_get_battery_voltage_now(bq2515x);
 871                 if (ret < 0)
 872                         return ret;
 873                 val->intval = ret;
 874                 break;
 875
 876         case POWER_SUPPLY_PROP_CURRENT_NOW:
 877                 ret = bq2515x_get_battery_current_now(bq2515x);
 878                 if (ret < 0)
 879                         return ret;
 880                 val->intval = ret;
 881                 break;
 882
 883         default:
 884                 return -EINVAL;
 885         }
 886         return 0;
 887 }
 888
 889 static const enum power_supply_property bq2515x_battery_properties[] = {
 890         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 891         POWER_SUPPLY_PROP_CURRENT_NOW,
 892         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 893         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 894 };
 895
 896 static const enum power_supply_property bq2515x_mains_properties[] = {
 897         POWER_SUPPLY_PROP_ONLINE,
 898         POWER_SUPPLY_PROP_STATUS,
 899         POWER_SUPPLY_PROP_HEALTH,
 900         POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 901         POWER_SUPPLY_PROP_MODEL_NAME,
 902         POWER_SUPPLY_PROP_MANUFACTURER,
 903         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 904         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 905         POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
 906 };
 907
 908 static const struct power_supply_desc bq2515x_mains_desc = {
 909         .name                   = "bq2515x-mains",
 910         .type                   = POWER_SUPPLY_TYPE_MAINS,
 911         .get_property           = bq2515x_mains_get_property,
 912         .set_property           = bq2515x_mains_set_property,
 913         .properties             = bq2515x_mains_properties,
 914         .num_properties         = ARRAY_SIZE(bq2515x_mains_properties),
 915         .property_is_writeable  = bq2515x_power_supply_property_is_writeable,
 916 };
 917
 918 static const struct power_supply_desc bq2515x_battery_desc = {
 919         .name                   = "bq2515x-battery",
 920         .type                   = POWER_SUPPLY_TYPE_BATTERY,
 921         .get_property           = bq2515x_battery_get_property,
 922         .properties             = bq2515x_battery_properties,
 923         .num_properties         = ARRAY_SIZE(bq2515x_battery_properties),
 924         .property_is_writeable  = bq2515x_power_supply_property_is_writeable,
 925 };
 926
 927 static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
 928                 struct device *dev, struct power_supply_config psy_cfg)
 929 {
 930         bq2515x->mains = devm_power_supply_register(bq2515x->dev,
 931                                                     &bq2515x_mains_desc,
 932                                                     &psy_cfg);
 933         if (IS_ERR(bq2515x->mains))
 934                 return -EINVAL;
 935
 936         bq2515x->battery = devm_power_supply_register(bq2515x->dev,
 937                                                       &bq2515x_battery_desc,
 938                                                       &psy_cfg);
 939         if (IS_ERR(bq2515x->battery))
 940                 return -EINVAL;
 941
 942         return 0;
 943 }
 944
 945 static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
 946 {
 947         int ret;
 948         struct power_supply_battery_info bat_info = { };
 949
 950         ret = bq2515x_disable_watchdog_timers(bq2515x);
 951         if (ret)
 952                 return ret;
 953
 954         if (bq2515x->init_data.ilim) {
 955                 ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
 956                 if (ret)
 957                         return ret;
 958         }
 959
 960         ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
 961         if (ret) {
 962                 dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
 963
 964                 bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA;
 965
 966                 bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV;
 967
 968                 bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA;
 969
 970         } else {
 971                 bq2515x->init_data.ichg =
 972                                 bat_info.constant_charge_current_max_ua;
 973
 974                 bq2515x->init_data.vbatreg =
 975                                 bat_info.constant_charge_voltage_max_uv;
 976
 977                 bq2515x->init_data.iprechg =
 978                                 bat_info.precharge_current_ua;
 979         }
 980
 981         ret = bq2515x_set_const_charge_current(bq2515x,
 982                                                 bq2515x->init_data.ichg);
 983         if (ret)
 984                 return ret;
 985
 986         ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg);
 987         if (ret)
 988                 return ret;
 989
 990         return bq2515x_set_precharge_current(bq2515x,
 991                                                 bq2515x->init_data.iprechg);
 992 }
 993
 994 static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
 995 {
 996         int ret;
 997
 998         ret = device_property_read_u32(bq2515x->dev,
 999                                       "input-current-limit-microamp",
1000                                       &bq2515x->init_data.ilim);
1001         if (ret) {
1002                 switch (bq2515x->device_id) {
1003                 case BQ25150:
1004                         bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
1005                         break;
1006                 case BQ25155:
1007                         bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
1008                         break;
1009                 }
1010         }
1011
1012         bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
1013                                                    "ac-detect", GPIOD_IN);
1014         if (IS_ERR(bq2515x->ac_detect_gpio)) {
1015                 ret = PTR_ERR(bq2515x->ac_detect_gpio);
1016                 dev_err(bq2515x->dev, "Failed to get ac detect");
1017                 return ret;
1018         }
1019
1020         bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
1021                                                    "reset", GPIOD_OUT_LOW);
1022         if (IS_ERR(bq2515x->reset_gpio)) {
1023                 ret = PTR_ERR(bq2515x->reset_gpio);
1024                 dev_err(bq2515x->dev, "Failed to get reset");
1025                 return ret;
1026         }
1027
1028         bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
1029                                                 "powerdown", GPIOD_OUT_LOW);
1030         if (IS_ERR(bq2515x->powerdown_gpio)) {
1031                 ret = PTR_ERR(bq2515x->powerdown_gpio);
1032                 dev_err(bq2515x->dev, "Failed to get powerdown");
1033                 return ret;
1034         }
1035
1036         bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
1037                                                    "charge-enable",
1038                                                    GPIOD_OUT_LOW);
1039         if (IS_ERR(bq2515x->ce_gpio)) {
1040                 ret = PTR_ERR(bq2515x->ce_gpio);
1041                 dev_err(bq2515x->dev, "Failed to get ce");
1042                 return ret;
1043         }
1044
1045         return 0;
1046 }
1047
1048 static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
1049 {
1050         switch (reg) {
1051         case BQ2515X_STAT0 ... BQ2515X_FLAG3:
1052         case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
1053                 return true;
1054         default:
1055                 return false;
1056         }
1057 }
1058
1059 static const struct regmap_config bq25150_regmap_config = {
1060         .reg_bits = 8,
1061         .val_bits = 8,
1062
1063         .max_register           = BQ2515X_DEVICE_ID,
1064         .reg_defaults           = bq25150_reg_defaults,
1065         .num_reg_defaults       = ARRAY_SIZE(bq25150_reg_defaults),
1066         .cache_type             = REGCACHE_RBTREE,
1067         .volatile_reg           = bq2515x_volatile_register,
1068 };
1069
1070 static const struct regmap_config bq25155_regmap_config = {
1071         .reg_bits = 8,
1072         .val_bits = 8,
1073
1074         .max_register           = BQ2515X_DEVICE_ID,
1075         .reg_defaults           = bq25155_reg_defaults,
1076         .num_reg_defaults       = ARRAY_SIZE(bq25155_reg_defaults),
1077         .cache_type             = REGCACHE_RBTREE,
1078         .volatile_reg           = bq2515x_volatile_register,
1079 };
1080
1081 static int bq2515x_probe(struct i2c_client *client,
1082                          const struct i2c_device_id *id)
1083 {
1084         struct device *dev = &client->dev;
1085         struct bq2515x_device *bq2515x;
1086         struct power_supply_config charger_cfg = {};
1087         int ret;
1088
1089         bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
1090         if (!bq2515x)
1091                 return -ENOMEM;
1092
1093         bq2515x->dev = dev;
1094
1095         strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
1096
1097         bq2515x->device_id = id->driver_data;
1098
1099         switch (bq2515x->device_id) {
1100         case BQ25150:
1101                 bq2515x->regmap = devm_regmap_init_i2c(client,
1102                                                 &bq25150_regmap_config);
1103                 break;
1104         case BQ25155:
1105                 bq2515x->regmap = devm_regmap_init_i2c(client,
1106                                                 &bq25155_regmap_config);
1107                 break;
1108         }
1109
1110         if (IS_ERR(bq2515x->regmap)) {
1111                 dev_err(dev, "failed to allocate register map\n");
1112                 return PTR_ERR(bq2515x->regmap);
1113         }
1114
1115         i2c_set_clientdata(client, bq2515x);
1116
1117         charger_cfg.drv_data = bq2515x;
1118         charger_cfg.of_node = dev->of_node;
1119
1120         ret = bq2515x_read_properties(bq2515x);
1121         if (ret) {
1122                 dev_err(dev, "Failed to read device tree properties %d\n",
1123                                                                         ret);
1124                 return ret;
1125         }
1126
1127         ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
1128         if (ret) {
1129                 dev_err(dev, "failed to register power supply\n");
1130                 return ret;
1131         }
1132
1133         ret = bq2515x_hw_init(bq2515x);
1134         if (ret) {
1135                 dev_err(dev, "Cannot initialize the chip\n");
1136                 return ret;
1137         }
1138
1139         return 0;
1140 }
1141
1142 static const struct i2c_device_id bq2515x_i2c_ids[] = {
1143         { "bq25150", BQ25150, },
1144         { "bq25155", BQ25155, },
1145         {},
1146 };
1147 MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
1148
1149 static const struct of_device_id bq2515x_of_match[] = {
1150         { .compatible = "ti,bq25150", },
1151         { .compatible = "ti,bq25155", },
1152         { },
1153 };
1154 MODULE_DEVICE_TABLE(of, bq2515x_of_match);
1155
1156 static struct i2c_driver bq2515x_driver = {
1157         .driver = {
1158                 .name = "bq2515x-charger",
1159                 .of_match_table = bq2515x_of_match,
1160         },
1161         .probe = bq2515x_probe,
1162         .id_table = bq2515x_i2c_ids,
1163 };
1164 module_i2c_driver(bq2515x_driver);
1165
1166 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
1167 MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
1168 MODULE_DESCRIPTION("BQ2515X charger driver");
1169 MODULE_LICENSE("GPL v2");