drivers/power/pm2301_charger.c

   1 /*
   2  * Copyright 2012 ST Ericsson.
   3  *
   4  * Power supply driver for ST Ericsson pm2xxx_charger charger
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/module.h>
  13 #include <linux/device.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/delay.h>
  16 #include <linux/slab.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/power_supply.h>
  19 #include <linux/completion.h>
  20 #include <linux/regulator/consumer.h>
  21 #include <linux/err.h>
  22 #include <linux/i2c.h>
  23 #include <linux/workqueue.h>
  24 #include <linux/kobject.h>
  25 #include <linux/mfd/abx500.h>
  26 #include <linux/mfd/abx500/ab8500.h>
  27 #include <linux/mfd/abx500/ab8500-bm.h>
  28 #include <linux/mfd/abx500/ab8500-gpadc.h>
  29 #include <linux/mfd/abx500/ux500_chargalg.h>
  30 #include <linux/pm2301_charger.h>
  31 #include <linux/gpio.h>
  32
  33 #include "pm2301_charger.h"
  34
  35 #define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
  36                 struct pm2xxx_charger, ac_chg)
  37
  38 static int pm2xxx_interrupt_registers[] = {
  39         PM2XXX_REG_INT1,
  40         PM2XXX_REG_INT2,
  41         PM2XXX_REG_INT3,
  42         PM2XXX_REG_INT4,
  43         PM2XXX_REG_INT5,
  44         PM2XXX_REG_INT6,
  45 };
  46
  47 static enum power_supply_property pm2xxx_charger_ac_props[] = {
  48         POWER_SUPPLY_PROP_HEALTH,
  49         POWER_SUPPLY_PROP_PRESENT,
  50         POWER_SUPPLY_PROP_ONLINE,
  51         POWER_SUPPLY_PROP_VOLTAGE_AVG,
  52 };
  53
  54 static int pm2xxx_charger_voltage_map[] = {
  55         3500,
  56         3525,
  57         3550,
  58         3575,
  59         3600,
  60         3625,
  61         3650,
  62         3675,
  63         3700,
  64         3725,
  65         3750,
  66         3775,
  67         3800,
  68         3825,
  69         3850,
  70         3875,
  71         3900,
  72         3925,
  73         3950,
  74         3975,
  75         4000,
  76         4025,
  77         4050,
  78         4075,
  79         4100,
  80         4125,
  81         4150,
  82         4175,
  83         4200,
  84         4225,
  85         4250,
  86         4275,
  87         4300,
  88 };
  89
  90 static int pm2xxx_charger_current_map[] = {
  91         200,
  92         200,
  93         400,
  94         600,
  95         800,
  96         1000,
  97         1200,
  98         1400,
  99         1600,
 100         1800,
 101         2000,
 102         2200,
 103         2400,
 104         2600,
 105         2800,
 106         3000,
 107 };
 108
 109 static const struct i2c_device_id pm2xxx_ident[] = {
 110         { "pm2301", 0 },
 111         { }
 112 };
 113
 114 static void set_lpn_pin(struct pm2xxx_charger *pm2)
 115 {
 116         if (pm2->ac.charger_connected)
 117                 return;
 118         gpio_set_value(pm2->lpn_pin, 1);
 119
 120         return;
 121 }
 122
 123 static void clear_lpn_pin(struct pm2xxx_charger *pm2)
 124 {
 125         if (pm2->ac.charger_connected)
 126                 return;
 127         gpio_set_value(pm2->lpn_pin, 0);
 128
 129         return;
 130 }
 131
 132 static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 133 {
 134         int ret;
 135         /*
 136          * When AC adaptor is unplugged, the host
 137          * must put LPN high to be able to
 138          * communicate by I2C with PM2301
 139          * and receive I2C "acknowledge" from PM2301.
 140          */
 141         mutex_lock(&pm2->lock);
 142         set_lpn_pin(pm2);
 143
 144         ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 145                                 1, val);
 146         if (ret < 0)
 147                 dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
 148         else
 149                 ret = 0;
 150         clear_lpn_pin(pm2);
 151         mutex_unlock(&pm2->lock);
 152
 153         return ret;
 154 }
 155
 156 static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
 157 {
 158         int ret;
 159         /*
 160          * When AC adaptor is unplugged, the host
 161          * must put LPN high to be able to
 162          * communicate by I2C with PM2301
 163          * and receive I2C "acknowledge" from PM2301.
 164          */
 165         mutex_lock(&pm2->lock);
 166         set_lpn_pin(pm2);
 167
 168         ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 169                                 1, &val);
 170         if (ret < 0)
 171                 dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
 172         else
 173                 ret = 0;
 174         clear_lpn_pin(pm2);
 175         mutex_unlock(&pm2->lock);
 176
 177         return ret;
 178 }
 179
 180 static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2)
 181 {
 182         int ret;
 183
 184         /* Enable charging */
 185         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
 186                         (PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA));
 187
 188         return ret;
 189 }
 190
 191 static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
 192 {
 193         int ret;
 194
 195         /* Disable charging */
 196         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
 197                         (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
 198
 199         return ret;
 200 }
 201
 202 static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
 203 {
 204         queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
 205
 206         return 0;
 207 }
 208
 209
 210 int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
 211 {
 212         queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
 213
 214         return 0;
 215 }
 216
 217 static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
 218 {
 219         int ret = 0;
 220
 221         pm2->failure_input_ovv++;
 222         if (pm2->failure_input_ovv < 4) {
 223                 ret = pm2xxx_charging_enable_mngt(pm2);
 224                 goto out;
 225         } else {
 226                 pm2->failure_input_ovv = 0;
 227                 dev_err(pm2->dev, "Overvoltage detected\n");
 228                 pm2->flags.ovv = true;
 229                 power_supply_changed(&pm2->ac_chg.psy);
 230         }
 231
 232 out:
 233         return ret;
 234 }
 235
 236 static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
 237 {
 238         dev_dbg(pm2->dev , "20 minutes watchdog occured\n");
 239
 240         pm2->ac.wd_expired = true;
 241         power_supply_changed(&pm2->ac_chg.psy);
 242
 243         return 0;
 244 }
 245
 246 static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
 247 {
 248         switch (val) {
 249         case PM2XXX_INT1_ITVBATLOWR:
 250                 dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
 251                 break;
 252
 253         case PM2XXX_INT1_ITVBATLOWF:
 254                 dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
 255                 break;
 256
 257         default:
 258                 dev_err(pm2->dev, "Unknown VBAT level\n");
 259         }
 260
 261         return 0;
 262 }
 263
 264 static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
 265 {
 266         dev_dbg(pm2->dev, "battery disconnected\n");
 267
 268         return 0;
 269 }
 270
 271 static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
 272 {
 273         int ret;
 274
 275         ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
 276
 277         if (ret < 0) {
 278                 dev_err(pm2->dev, "Charger detection failed\n");
 279                 goto out;
 280         }
 281
 282         *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
 283
 284 out:
 285         return ret;
 286 }
 287
 288 static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val)
 289 {
 290
 291         int ret;
 292         u8 read_val;
 293
 294         /*
 295          * Since we can't be sure that the events are received
 296          * synchronously, we have the check if the main charger is
 297          * connected by reading the interrupt source register.
 298          */
 299         ret = pm2xxx_charger_detection(pm2, &read_val);
 300
 301         if ((ret == 0) && read_val) {
 302                 pm2->ac.charger_connected = 1;
 303                 pm2->ac_conn = true;
 304                 queue_work(pm2->charger_wq, &pm2->ac_work);
 305         }
 306
 307
 308         return ret;
 309 }
 310
 311 static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
 312                                                                 int val)
 313 {
 314         pm2->ac.charger_connected = 0;
 315         queue_work(pm2->charger_wq, &pm2->ac_work);
 316
 317         return 0;
 318 }
 319
 320 static int pm2_int_reg0(void *pm2_data, int val)
 321 {
 322         struct pm2xxx_charger *pm2 = pm2_data;
 323         int ret = 0;
 324
 325         if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
 326                 ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
 327                         (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
 328         }
 329
 330         if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
 331                 ret = pm2xxx_charger_bat_disc_mngt(pm2,
 332                                 PM2XXX_INT1_ITVBATDISCONNECT);
 333         }
 334
 335         return ret;
 336 }
 337
 338 static int pm2_int_reg1(void *pm2_data, int val)
 339 {
 340         struct pm2xxx_charger *pm2 = pm2_data;
 341         int ret = 0;
 342
 343         if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
 344                 dev_dbg(pm2->dev , "Main charger plugged\n");
 345                 ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
 346                         (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
 347         }
 348
 349         if (val &
 350                 (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
 351                 dev_dbg(pm2->dev , "Main charger unplugged\n");
 352                 ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
 353                                                 (PM2XXX_INT2_ITVPWR1UNPLUG |
 354                                                 PM2XXX_INT2_ITVPWR2UNPLUG));
 355         }
 356
 357         return ret;
 358 }
 359
 360 static int pm2_int_reg2(void *pm2_data, int val)
 361 {
 362         struct pm2xxx_charger *pm2 = pm2_data;
 363         int ret = 0;
 364
 365         if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
 366                 ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
 367
 368         if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
 369                                 PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
 370                 dev_dbg(pm2->dev,
 371                         "Watchdog occured for precharge, CC and CV charge\n");
 372         }
 373
 374         return ret;
 375 }
 376
 377 static int pm2_int_reg3(void *pm2_data, int val)
 378 {
 379         struct pm2xxx_charger *pm2 = pm2_data;
 380         int ret = 0;
 381
 382         if (val & (PM2XXX_INT4_ITCHARGINGON)) {
 383                 dev_dbg(pm2->dev ,
 384                         "chargind operation has started\n");
 385         }
 386
 387         if (val & (PM2XXX_INT4_ITVRESUME)) {
 388                 dev_dbg(pm2->dev,
 389                         "battery discharged down to VResume threshold\n");
 390         }
 391
 392         if (val & (PM2XXX_INT4_ITBATTFULL)) {
 393                 dev_dbg(pm2->dev , "battery fully detected\n");
 394         }
 395
 396         if (val & (PM2XXX_INT4_ITCVPHASE)) {
 397                 dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
 398         }
 399
 400         if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
 401                 pm2->failure_case = VPWR_OVV;
 402                 ret = pm2xxx_charger_ovv_mngt(pm2, val &
 403                         (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
 404                 dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
 405         }
 406
 407         if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
 408                                 PM2XXX_INT4_S_ITBATTEMPHOT)) {
 409                 ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
 410                         (PM2XXX_INT4_S_ITBATTEMPCOLD |
 411                         PM2XXX_INT4_S_ITBATTEMPHOT));
 412                 dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
 413         }
 414
 415         return ret;
 416 }
 417
 418 static int pm2_int_reg4(void *pm2_data, int val)
 419 {
 420         struct pm2xxx_charger *pm2 = pm2_data;
 421         int ret = 0;
 422
 423         if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
 424                 pm2->failure_case = VSYSTEM_OVV;
 425                 ret = pm2xxx_charger_ovv_mngt(pm2, val &
 426                                                 PM2XXX_INT5_ITVSYSTEMOVV);
 427                 dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
 428         }
 429
 430         if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
 431                                 PM2XXX_INT5_ITTHERMALWARNINGRISE |
 432                                 PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
 433                                 PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
 434                 dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
 435                 ret = pm2xxx_charger_die_therm_mngt(pm2, val &
 436                         (PM2XXX_INT5_ITTHERMALWARNINGFALL |
 437                         PM2XXX_INT5_ITTHERMALWARNINGRISE |
 438                         PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
 439                         PM2XXX_INT5_ITTHERMALSHUTDOWNRISE));
 440         }
 441
 442         return ret;
 443 }
 444
 445 static int pm2_int_reg5(void *pm2_data, int val)
 446 {
 447         struct pm2xxx_charger *pm2 = pm2_data;
 448         int ret = 0;
 449
 450
 451         if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
 452                 dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
 453         }
 454
 455         if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
 456                         PM2XXX_INT6_ITVPWR1VALIDRISE |
 457                         PM2XXX_INT6_ITVPWR2VALIDFALL |
 458                         PM2XXX_INT6_ITVPWR1VALIDFALL)) {
 459                 dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
 460         }
 461
 462         return ret;
 463 }
 464
 465 static irqreturn_t  pm2xxx_irq_int(int irq, void *data)
 466 {
 467         struct pm2xxx_charger *pm2 = data;
 468         struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
 469         int i;
 470
 471         for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
 472                  pm2xxx_reg_read(pm2,
 473                                 pm2xxx_interrupt_registers[i],
 474                                 &(interrupt->reg[i]));
 475
 476                 if (interrupt->reg[i] > 0)
 477                         interrupt->handler[i](pm2, interrupt->reg[i]);
 478         }
 479
 480         return IRQ_HANDLED;
 481 }
 482
 483 static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2)
 484 {
 485         int ret = 0;
 486         u8 val;
 487
 488         if (pm2->ac.charger_connected && pm2->ac.charger_online) {
 489
 490                 ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val);
 491                 if (ret < 0) {
 492                         dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
 493                         goto out;
 494                 }
 495
 496                 if (val & PM2XXX_INT4_S_ITCVPHASE)
 497                         ret = PM2XXX_CONST_VOLT;
 498                 else
 499                         ret = PM2XXX_CONST_CURR;
 500         }
 501 out:
 502         return ret;
 503 }
 504
 505 static int pm2xxx_current_to_regval(int curr)
 506 {
 507         int i;
 508
 509         if (curr < pm2xxx_charger_current_map[0])
 510                 return 0;
 511
 512         for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) {
 513                 if (curr < pm2xxx_charger_current_map[i])
 514                         return (i - 1);
 515         }
 516
 517         i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1;
 518         if (curr == pm2xxx_charger_current_map[i])
 519                 return i;
 520         else
 521                 return -EINVAL;
 522 }
 523
 524 static int pm2xxx_voltage_to_regval(int curr)
 525 {
 526         int i;
 527
 528         if (curr < pm2xxx_charger_voltage_map[0])
 529                 return 0;
 530
 531         for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) {
 532                 if (curr < pm2xxx_charger_voltage_map[i])
 533                         return i - 1;
 534         }
 535
 536         i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1;
 537         if (curr == pm2xxx_charger_voltage_map[i])
 538                 return i;
 539         else
 540                 return -EINVAL;
 541 }
 542
 543 static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
 544                 int ich_out)
 545 {
 546         int ret;
 547         int curr_index;
 548         struct pm2xxx_charger *pm2;
 549         u8 val;
 550
 551         if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
 552                 pm2 = to_pm2xxx_charger_ac_device_info(charger);
 553         else
 554                 return -ENXIO;
 555
 556         curr_index = pm2xxx_current_to_regval(ich_out);
 557         if (curr_index < 0) {
 558                 dev_err(pm2->dev,
 559                         "Charger current too high, charging not started\n");
 560                 return -ENXIO;
 561         }
 562
 563         ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
 564         if (ret >= 0) {
 565                 val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
 566                 val |= curr_index;
 567                 ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
 568                 if (ret < 0) {
 569                         dev_err(pm2->dev,
 570                                 "%s write failed\n", __func__);
 571                 }
 572         }
 573         else
 574                 dev_err(pm2->dev, "%s read failed\n", __func__);
 575
 576         return ret;
 577 }
 578
 579 static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
 580         enum power_supply_property psp,
 581         union power_supply_propval *val)
 582 {
 583         struct pm2xxx_charger *pm2;
 584
 585         pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy));
 586
 587         switch (psp) {
 588         case POWER_SUPPLY_PROP_HEALTH:
 589                 if (pm2->flags.mainextchnotok)
 590                         val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 591                 else if (pm2->ac.wd_expired)
 592                         val->intval = POWER_SUPPLY_HEALTH_DEAD;
 593                 else if (pm2->flags.main_thermal_prot)
 594                         val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
 595                 else
 596                         val->intval = POWER_SUPPLY_HEALTH_GOOD;
 597                 break;
 598         case POWER_SUPPLY_PROP_ONLINE:
 599                 val->intval = pm2->ac.charger_online;
 600                 break;
 601         case POWER_SUPPLY_PROP_PRESENT:
 602                 val->intval = pm2->ac.charger_connected;
 603                 break;
 604         case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 605                 pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2);
 606                 val->intval = pm2->ac.cv_active;
 607                 break;
 608         default:
 609                 return -EINVAL;
 610         }
 611         return 0;
 612 }
 613
 614 static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
 615 {
 616         int ret = 0;
 617
 618         /* enable CC and CV watchdog */
 619         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3,
 620                 (PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN));
 621         if( ret < 0)
 622                 return ret;
 623
 624         /* enable precharge watchdog */
 625         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
 626                                         PM2XXX_CH_WD_PRECH_PHASE_60MIN);
 627
 628         /* Disable auto timeout */
 629         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
 630                                         PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
 631
 632         /*
 633      * EOC current level = 100mA
 634          * Precharge current level = 100mA
 635          * CC current level = 1000mA
 636          */
 637         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
 638                 (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
 639                 PM2XXX_CH_PRECH_CURRENT_100MA |
 640                 PM2XXX_CH_EOC_CURRENT_100MA));
 641
 642         /*
 643      * recharge threshold = 3.8V
 644          * Precharge to CC threshold = 2.9V
 645          */
 646         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
 647                 (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
 648
 649         /* float voltage charger level = 4.2V */
 650         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
 651                 PM2XXX_CH_VOLT_4_2);
 652
 653         /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
 654         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
 655                 (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
 656                 PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
 657                 PM2XXX_CH_CC_MODEDROP_DIS));
 658
 659         /* Input charger level of over voltage = 10V */
 660         ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
 661                                         PM2XXX_VPWR2_OVV_10);
 662         ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
 663                                         PM2XXX_VPWR1_OVV_10);
 664
 665         /* Input charger drop */
 666         ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
 667                 (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
 668                 PM2XXX_VPWR2_DROP_DIS));
 669         ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
 670                 (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
 671                 PM2XXX_VPWR1_DROP_DIS));
 672
 673         /* Disable battery low monitoring */
 674         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
 675                 PM2XXX_VBAT_LOW_MONITORING_ENA);
 676
 677         /* Disable LED */
 678         ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
 679                 PM2XXX_LED_SELECT_DIS);
 680
 681         return ret;
 682 }
 683
 684 static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
 685         int enable, int vset, int iset)
 686 {
 687         int ret;
 688         int volt_index;
 689         int curr_index;
 690         u8 val;
 691
 692         struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger);
 693
 694         if (enable) {
 695                 if (!pm2->ac.charger_connected) {
 696                         dev_dbg(pm2->dev, "AC charger not connected\n");
 697                         return -ENXIO;
 698                 }
 699
 700                 dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
 701                 if (!pm2->vddadc_en_ac) {
 702                         regulator_enable(pm2->regu);
 703                         pm2->vddadc_en_ac = true;
 704                 }
 705
 706                 ret = pm2xxx_charging_init(pm2);
 707                 if (ret < 0) {
 708                         dev_err(pm2->dev, "%s charging init failed\n",
 709                                         __func__);
 710                         goto error_occured;
 711                 }
 712
 713                 volt_index = pm2xxx_voltage_to_regval(vset);
 714                 curr_index = pm2xxx_current_to_regval(iset);
 715
 716                 if (volt_index < 0 || curr_index < 0) {
 717                         dev_err(pm2->dev,
 718                                 "Charger voltage or current too high, "
 719                                 "charging not started\n");
 720                         return -ENXIO;
 721                 }
 722
 723                 ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
 724                 if (ret < 0) {
 725                         dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
 726                         goto error_occured;
 727                 }
 728                 val &= ~PM2XXX_CH_VOLT_MASK;
 729                 val |= volt_index;
 730                 ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
 731                 if (ret < 0) {
 732                         dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
 733                         goto error_occured;
 734                 }
 735
 736                 ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
 737                 if (ret < 0) {
 738                         dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
 739                         goto error_occured;
 740                 }
 741                 val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
 742                 val |= curr_index;
 743                 ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
 744                 if (ret < 0) {
 745                         dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
 746                         goto error_occured;
 747                 }
 748
 749                 if (!pm2->bat->enable_overshoot) {
 750                         ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
 751                         if (ret < 0) {
 752                                 dev_err(pm2->dev, "%s pm2xxx read failed\n",
 753                                                                 __func__);
 754                                 goto error_occured;
 755                         }
 756                         val |= PM2XXX_ANTI_OVERSHOOT_EN;
 757                         ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
 758                         if (ret < 0) {
 759                                 dev_err(pm2->dev, "%s pm2xxx write failed\n",
 760                                                                 __func__);
 761                                 goto error_occured;
 762                         }
 763                 }
 764
 765                 ret = pm2xxx_charging_enable_mngt(pm2);
 766                 if (ret < 0) {
 767                         dev_err(pm2->dev, "Failed to enable"
 768                                                 "pm2xxx ac charger\n");
 769                         goto error_occured;
 770                 }
 771
 772                 pm2->ac.charger_online = 1;
 773         } else {
 774                 pm2->ac.charger_online = 0;
 775                 pm2->ac.wd_expired = false;
 776
 777                 /* Disable regulator if enabled */
 778                 if (pm2->vddadc_en_ac) {
 779                         regulator_disable(pm2->regu);
 780                         pm2->vddadc_en_ac = false;
 781                 }
 782
 783                 ret = pm2xxx_charging_disable_mngt(pm2);
 784                 if (ret < 0) {
 785                         dev_err(pm2->dev, "failed to disable"
 786                                                 "pm2xxx ac charger\n");
 787                         goto error_occured;
 788                 }
 789
 790                 dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");
 791         }
 792         power_supply_changed(&pm2->ac_chg.psy);
 793
 794 error_occured:
 795         return ret;
 796 }
 797
 798 static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger)
 799 {
 800         int ret;
 801         struct pm2xxx_charger *pm2;
 802
 803         if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
 804                 pm2 = to_pm2xxx_charger_ac_device_info(charger);
 805         else
 806                 return -ENXIO;
 807
 808         ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER);
 809         if (ret)
 810                 dev_err(pm2->dev, "Failed to kick WD!\n");
 811
 812         return ret;
 813 }
 814
 815 static void pm2xxx_charger_ac_work(struct work_struct *work)
 816 {
 817         struct pm2xxx_charger *pm2 = container_of(work,
 818                 struct pm2xxx_charger, ac_work);
 819
 820
 821         power_supply_changed(&pm2->ac_chg.psy);
 822         sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
 823 };
 824
 825 static void pm2xxx_charger_check_main_thermal_prot_work(
 826         struct work_struct *work)
 827 {
 828 };
 829
 830 static struct pm2xxx_interrupts pm2xxx_int = {
 831         .handler[0] = pm2_int_reg0,
 832         .handler[1] = pm2_int_reg1,
 833         .handler[2] = pm2_int_reg2,
 834         .handler[3] = pm2_int_reg3,
 835         .handler[4] = pm2_int_reg4,
 836         .handler[5] = pm2_int_reg5,
 837 };
 838
 839 static struct pm2xxx_irq pm2xxx_charger_irq[] = {
 840         {"PM2XXX_IRQ_INT", pm2xxx_irq_int},
 841 };
 842
 843 static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client)
 844 {
 845         return 0;
 846 }
 847
 848 static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client,
 849         pm_message_t state)
 850 {
 851         return 0;
 852 }
 853
 854 static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 855                 const struct i2c_device_id *id)
 856 {
 857         struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
 858         struct pm2xxx_charger *pm2;
 859         int ret = 0;
 860         u8 val;
 861
 862         pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
 863         if (!pm2) {
 864                 dev_err(pm2->dev, "pm2xxx_charger allocation failed\n");
 865                 return -ENOMEM;
 866         }
 867
 868         /* get parent data */
 869         pm2->dev = &i2c_client->dev;
 870         pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
 871
 872         pm2->pm2_int = &pm2xxx_int;
 873
 874         /* get charger spcific platform data */
 875         if (!pl_data->wall_charger) {
 876                 dev_err(pm2->dev, "no charger platform data supplied\n");
 877                 ret = -EINVAL;
 878                 goto free_device_info;
 879         }
 880
 881         pm2->pdata = pl_data->wall_charger;
 882
 883         /* get battery specific platform data */
 884         if (!pl_data->battery) {
 885                 dev_err(pm2->dev, "no battery platform data supplied\n");
 886                 ret = -EINVAL;
 887                 goto free_device_info;
 888         }
 889
 890         pm2->bat = pl_data->battery;
 891
 892         /*get lpn GPIO from platform data*/
 893         if (!pm2->pdata->lpn_gpio) {
 894                 dev_err(pm2->dev, "no lpn gpio data supplied\n");
 895                 ret = -EINVAL;
 896                 goto free_device_info;
 897         }
 898         pm2->lpn_pin = pm2->pdata->lpn_gpio;
 899
 900         if (!i2c_check_functionality(i2c_client->adapter,
 901                         I2C_FUNC_SMBUS_BYTE_DATA |
 902                         I2C_FUNC_SMBUS_READ_WORD_DATA)) {
 903                 ret = -ENODEV;
 904                 dev_info(pm2->dev, "pm2301 i2c_check_functionality failed\n");
 905                 goto free_device_info;
 906         }
 907
 908         pm2->config.pm2xxx_i2c = i2c_client;
 909         pm2->config.pm2xxx_id = (struct i2c_device_id *) id;
 910         i2c_set_clientdata(i2c_client, pm2);
 911
 912         /* AC supply */
 913         /* power_supply base class */
 914         pm2->ac_chg.psy.name = pm2->pdata->label;
 915         pm2->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS;
 916         pm2->ac_chg.psy.properties = pm2xxx_charger_ac_props;
 917         pm2->ac_chg.psy.num_properties = ARRAY_SIZE(pm2xxx_charger_ac_props);
 918         pm2->ac_chg.psy.get_property = pm2xxx_charger_ac_get_property;
 919         pm2->ac_chg.psy.supplied_to = pm2->pdata->supplied_to;
 920         pm2->ac_chg.psy.num_supplicants = pm2->pdata->num_supplicants;
 921         /* pm2xxx_charger sub-class */
 922         pm2->ac_chg.ops.enable = &pm2xxx_charger_ac_en;
 923         pm2->ac_chg.ops.kick_wd = &pm2xxx_charger_watchdog_kick;
 924         pm2->ac_chg.ops.update_curr = &pm2xxx_charger_update_charger_current;
 925         pm2->ac_chg.max_out_volt = pm2xxx_charger_voltage_map[
 926                 ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
 927         pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
 928                 ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
 929         pm2->ac_chg.wdt_refresh = WD_KICK_INTERVAL;
 930         pm2->ac_chg.enabled = true;
 931         pm2->ac_chg.external = true;
 932
 933         /* Create a work queue for the charger */
 934         pm2->charger_wq =
 935                 create_singlethread_workqueue("pm2xxx_charger_wq");
 936         if (pm2->charger_wq == NULL) {
 937                 dev_err(pm2->dev, "failed to create work queue\n");
 938                 goto free_device_info;
 939         }
 940
 941         /* Init work for charger detection */
 942         INIT_WORK(&pm2->ac_work, pm2xxx_charger_ac_work);
 943
 944         /* Init work for checking HW status */
 945         INIT_WORK(&pm2->check_main_thermal_prot_work,
 946                 pm2xxx_charger_check_main_thermal_prot_work);
 947
 948         /*
 949          * VDD ADC supply needs to be enabled from this driver when there
 950          * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
 951          * interrupts during charging
 952          */
 953         pm2->regu = regulator_get(pm2->dev, "vddadc");
 954         if (IS_ERR(pm2->regu)) {
 955                 ret = PTR_ERR(pm2->regu);
 956                 dev_err(pm2->dev, "failed to get vddadc regulator\n");
 957                 goto free_charger_wq;
 958         }
 959
 960         /* Register AC charger class */
 961         ret = power_supply_register(pm2->dev, &pm2->ac_chg.psy);
 962         if (ret) {
 963                 dev_err(pm2->dev, "failed to register AC charger\n");
 964                 goto free_regulator;
 965         }
 966
 967         /* Register interrupts */
 968         ret = request_threaded_irq(pm2->pdata->irq_number, NULL,
 969                                 pm2xxx_charger_irq[0].isr,
 970                                 pm2->pdata->irq_type,
 971                                 pm2xxx_charger_irq[0].name, pm2);
 972
 973         if (ret != 0) {
 974                 dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
 975                 pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret);
 976                 goto unregister_pm2xxx_charger;
 977         }
 978
 979         /*Initialize lock*/
 980         mutex_init(&pm2->lock);
 981
 982         /*
 983          * Charger detection mechanism requires pulling up the LPN pin
 984          * while i2c communication if Charger is not connected
 985          * LPN pin of PM2301 is GPIO60 of AB9540
 986          */
 987         ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
 988         if (ret < 0) {
 989                 dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
 990                 goto unregister_pm2xxx_charger;
 991         }
 992         ret = gpio_direction_output(pm2->lpn_pin, 0);
 993         if (ret < 0) {
 994                 dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
 995                 goto free_gpio;
 996         }
 997
 998         ret = pm2xxx_charger_detection(pm2, &val);
 999
1000         if ((ret == 0) && val) {
1001                 pm2->ac.charger_connected = 1;
1002                 pm2->ac_conn = true;
1003                 power_supply_changed(&pm2->ac_chg.psy);
1004                 sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
1005         }
1006
1007         return 0;
1008
1009 free_gpio:
1010         gpio_free(pm2->lpn_pin);
1011 unregister_pm2xxx_charger:
1012         /* unregister power supply */
1013         power_supply_unregister(&pm2->ac_chg.psy);
1014 free_regulator:
1015         /* disable the regulator */
1016         regulator_put(pm2->regu);
1017 free_charger_wq:
1018         destroy_workqueue(pm2->charger_wq);
1019 free_device_info:
1020         kfree(pm2);
1021         return ret;
1022 }
1023
1024 static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
1025 {
1026         struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
1027
1028         /* Disable AC charging */
1029         pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
1030
1031         /* Disable interrupts */
1032         free_irq(pm2->pdata->irq_number, pm2);
1033
1034         /* Delete the work queue */
1035         destroy_workqueue(pm2->charger_wq);
1036
1037         flush_scheduled_work();
1038
1039         /* disable the regulator */
1040         regulator_put(pm2->regu);
1041
1042         power_supply_unregister(&pm2->ac_chg.psy);
1043
1044         /*Free GPIO60*/
1045         gpio_free(pm2->lpn_pin);
1046
1047         kfree(pm2);
1048
1049         return 0;
1050 }
1051
1052 static const struct i2c_device_id pm2xxx_id[] = {
1053         { "pm2301", 0 },
1054         { }
1055 };
1056
1057 MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
1058
1059 static struct i2c_driver pm2xxx_charger_driver = {
1060         .probe = pm2xxx_wall_charger_probe,
1061         .remove = __devexit_p(pm2xxx_wall_charger_remove),
1062         .suspend = pm2xxx_wall_charger_suspend,
1063         .resume = pm2xxx_wall_charger_resume,
1064         .driver = {
1065                 .name = "pm2xxx-wall_charger",
1066                 .owner = THIS_MODULE,
1067         },
1068         .id_table = pm2xxx_id,
1069 };
1070
1071 static int __init pm2xxx_charger_init(void)
1072 {
1073         return i2c_add_driver(&pm2xxx_charger_driver);
1074 }
1075
1076 static void __exit pm2xxx_charger_exit(void)
1077 {
1078         i2c_del_driver(&pm2xxx_charger_driver);
1079 }
1080
1081 subsys_initcall_sync(pm2xxx_charger_init);
1082 module_exit(pm2xxx_charger_exit);
1083
1084 MODULE_LICENSE("GPL v2");
1085 MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
1086 MODULE_ALIAS("platform:pm2xxx-charger");
1087 MODULE_DESCRIPTION("PM2xxx charger management driver");
1088