1 # SPDX-License-Identifier: GPL-2.0-only
3 # X86 Platform Specific Drivers
6 menuconfig X86_PLATFORM_DEVICES
7 bool "X86 Platform Specific Device Drivers"
11 Say Y here to get to see options for device drivers for various
12 x86 platforms, including vendor-specific laptop extension drivers.
13 This option alone does not add any kernel code.
15 If you say N, all options in this submenu will be skipped and disabled.
17 if X86_PLATFORM_DEVICES
23 This driver adds support for the ACPI-WMI (Windows Management
24 Instrumentation) mapper device (PNP0C14) found on some systems.
26 ACPI-WMI is a proprietary extension to ACPI to expose parts of the
27 ACPI firmware to userspace - this is done through various vendor
28 defined methods and data blocks in a PNP0C14 device, which are then
29 made available for userspace to call.
31 The implementation of this in Linux currently only exposes this to
32 other kernel space drivers.
34 This driver is a required dependency to build the firmware specific
35 drivers needed on many machines, including Acer and HP laptops.
37 It is safe to enable this driver even if your DSDT doesn't define
41 tristate "WMI embedded Binary MOF driver"
45 Say Y here if you want to be able to read a firmware-embedded
46 WMI Binary MOF data. Using this requires userspace tools and may be
49 To compile this driver as a module, choose M here: the module will
53 tristate "Alienware Special feature control"
59 This is a driver for controlling Alienware BIOS driven
60 features. It exposes an interface for controlling the AlienFX
61 zones on Alienware machines that don't contain a dedicated AlienFX
62 USB MCU such as the X51 and X51-R2.
65 tristate "Huawei WMI laptop extras driver"
66 depends on ACPI_BATTERY
69 select INPUT_SPARSEKMAP
72 select LEDS_TRIGGER_AUDIO
75 This driver provides support for Huawei WMI hotkeys, battery charge
76 control, fn-lock, mic-mute LED, and other extra features.
78 To compile this driver as a module, choose M here: the module
79 will be called huawei-wmi.
81 config INTEL_WMI_SBL_FW_UPDATE
82 tristate "Intel WMI Slim Bootloader firmware update signaling driver"
85 Say Y here if you want to be able to use the WMI interface to signal
86 Slim Bootloader to trigger update on next reboot.
88 To compile this driver as a module, choose M here: the module will
89 be called intel-wmi-sbl-fw-update.
91 config INTEL_WMI_THUNDERBOLT
92 tristate "Intel WMI thunderbolt force power driver"
95 Say Y here if you want to be able to use the WMI interface on select
96 systems to force the power control of Intel Thunderbolt controllers.
97 This is useful for updating the firmware when devices are not plugged
100 To compile this driver as a module, choose M here: the module will
101 be called intel-wmi-thunderbolt.
104 tristate "WMI support for MXM Laptop Graphics"
107 MXM is a standard for laptop graphics cards, the WMI interface
108 is required for switchable nvidia graphics machines
111 tristate "PEAQ 2-in-1 WMI hotkey driver"
115 Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
118 tristate "Xiaomi WMI key driver"
122 Say Y here if you want to support WMI-based keys on Xiaomi notebooks.
124 To compile this driver as a module, choose M here: the module will
125 be called xiaomi-wmi.
128 tristate "Acer Aspire One temperature and fan driver"
129 depends on ACPI && THERMAL
130 select THERMAL_GOV_BANG_BANG
132 This is a driver for Acer Aspire One netbooks. It allows to access
133 the temperature sensor and to control the fan.
135 After loading this driver the BIOS is still in control of the fan.
136 To let the kernel handle the fan, do:
137 echo -n enabled > /sys/class/thermal/thermal_zoneN/mode
138 where N=0,1,2... depending on the number of thermal nodes and the
139 detection order of your particular system. The "type" parameter
140 in the same node directory will tell you if it is "acerhdf".
142 For more information about this driver see
143 <https://piie.net/files/acerhdf_README.txt>
145 If you have an Acer Aspire One netbook, say Y or M
149 tristate "Acer Wireless Radio Control Driver"
153 The Acer Wireless Radio Control handles the airplane mode hotkey
154 present on new Acer laptops.
156 Say Y or M here if you have an Acer notebook with an airplane mode
159 If you choose to compile this driver as a module the module will be
160 called acer-wireless.
163 tristate "Acer WMI Laptop Extras"
167 depends on BACKLIGHT_CLASS_DEVICE
168 depends on SERIO_I8042
170 depends on RFKILL || RFKILL = n
172 select INPUT_SPARSEKMAP
173 # Acer WMI depends on ACPI_VIDEO when ACPI is enabled
174 select ACPI_VIDEO if ACPI
176 This is a driver for newer Acer (and Wistron) laptops. It adds
177 wireless radio and bluetooth control, and on some laptops,
178 exposes the mail LED and LCD backlight.
180 If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
184 tristate "Apple Gmux Driver"
185 depends on ACPI && PCI
187 depends on BACKLIGHT_CLASS_DEVICE
188 depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE
189 depends on ACPI_VIDEO=n || ACPI_VIDEO
191 This driver provides support for the gmux device found on many
192 Apple laptops, which controls the display mux for the hybrid
193 graphics as well as the backlight. Currently only backlight
194 control is supported by the driver.
197 tristate "Asus Laptop Extras"
201 depends on BACKLIGHT_CLASS_DEVICE
203 depends on RFKILL || RFKILL = n
204 depends on ACPI_VIDEO || ACPI_VIDEO = n
205 select INPUT_SPARSEKMAP
207 This is a driver for Asus laptops, Lenovo SL and the Pegatron
208 Lucid tablet. It may also support some MEDION, JVC or VICTOR
209 laptops. It makes all the extra buttons generate standard
210 ACPI events and input events, and on the Lucid the built-in
211 accelerometer appears as an input device. It also adds
212 support for video output switching, LCD backlight control,
213 Bluetooth and Wlan control, and most importantly, allows you
214 to blink those fancy LEDs.
216 For more information see <http://acpi4asus.sf.net>.
218 If you have an ACPI-compatible ASUS laptop, say Y or M here.
221 tristate "Asus Wireless Radio Control Driver"
227 The Asus Wireless Radio Control handles the airplane mode hotkey
228 present on some Asus laptops.
230 Say Y or M here if you have an ASUS notebook with an airplane mode
233 If you choose to compile this driver as a module the module will be
234 called asus-wireless.
237 tristate "ASUS WMI Driver"
239 depends on ACPI_BATTERY
242 depends on BACKLIGHT_CLASS_DEVICE
243 depends on RFKILL || RFKILL = n
244 depends on HOTPLUG_PCI
245 depends on ACPI_VIDEO || ACPI_VIDEO = n
246 select INPUT_SPARSEKMAP
250 Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
253 To compile this driver as a module, choose M here: the module will
257 tristate "Asus Notebook WMI Driver"
259 depends on SERIO_I8042 || SERIO_I8042 = n
261 This is a driver for newer Asus notebooks. It adds extra features
262 like wireless radio and bluetooth control, leds, hotkeys, backlight...
264 For more information, see
265 <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
267 If you have an ACPI-WMI compatible Asus Notebook, say Y or M
271 tristate "Eee PC Hotkey Driver"
274 depends on RFKILL || RFKILL = n
275 depends on ACPI_VIDEO || ACPI_VIDEO = n
276 depends on HOTPLUG_PCI
277 depends on BACKLIGHT_CLASS_DEVICE
281 select INPUT_SPARSEKMAP
283 This driver supports the Fn-Fx keys on Eee PC laptops.
285 It also gives access to some extra laptop functionalities like
286 Bluetooth, backlight and allows powering on/off some other
289 If you have an Eee PC laptop, say Y or M here. If this driver
290 doesn't work on your Eee PC, try eeepc-wmi instead.
293 tristate "Eee PC WMI Driver"
296 This is a driver for newer Eee PC laptops. It adds extra features
297 like wireless radio and bluetooth control, leds, hotkeys, backlight...
299 For more information, see
300 <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
302 If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
306 tristate "Dell Systems Management Base Driver"
309 The Dell Systems Management Base Driver provides a sysfs interface
310 for systems management software to perform System Management
311 Interrupts (SMIs) and Host Control Actions (system power cycle or
312 power off after OS shutdown) on certain Dell systems.
314 See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
315 and the Dell systems on which Dell systems management software makes
318 Say Y or M here to enable the driver for use by Dell systems
319 management software such as Dell OpenManage.
322 # The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
323 # backends are selected. The "depends" line prevents a configuration
324 # where DELL_SMBIOS=y while either of those dependencies =m.
327 tristate "Dell SMBIOS driver"
328 depends on DCDBAS || DCDBAS=n
329 depends on ACPI_WMI || ACPI_WMI=n
331 This provides support for the Dell SMBIOS calling interface.
332 If you have a Dell computer you should enable this option.
334 Be sure to select at least one backend for it to work properly.
336 config DELL_SMBIOS_WMI
337 bool "Dell SMBIOS driver WMI backend"
340 select DELL_WMI_DESCRIPTOR
341 depends on DELL_SMBIOS
343 This provides an implementation for the Dell SMBIOS calling interface
344 communicated over ACPI-WMI.
346 If you have a Dell computer from >2007 you should say Y here.
347 If you aren't sure and this module doesn't work for your computer
350 config DELL_SMBIOS_SMM
351 bool "Dell SMBIOS driver SMM backend"
354 depends on DELL_SMBIOS
356 This provides an implementation for the Dell SMBIOS calling interface
357 communicated over SMI/SMM.
359 If you have a Dell computer from <=2017 you should say Y here.
360 If you aren't sure and this module doesn't work for your computer
364 tristate "Dell Laptop Extras"
366 depends on BACKLIGHT_CLASS_DEVICE
367 depends on ACPI_VIDEO || ACPI_VIDEO = n
368 depends on RFKILL || RFKILL = n
369 depends on SERIO_I8042
370 depends on DELL_SMBIOS
375 select LEDS_TRIGGER_AUDIO
377 This driver adds support for rfkill and backlight control to Dell
378 laptops (except for some models covered by the Compal driver).
381 tristate "Dell Airplane Mode Switch driver"
386 Say Y here if you want to support Dell Airplane Mode Switch ACPI
387 device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
388 This driver register rfkill device or input hotkey device depending
389 on hardware type (hw switch slider or keyboard toggle button). For
390 rfkill devices it receive HW switch events and set correct hard
393 To compile this driver as a module, choose M here: the module will
397 tristate "BIOS update support for DELL systems via sysfs"
400 select FW_LOADER_USER_HELPER
402 Say m if you want to have the option of updating the BIOS for your
403 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
404 supporting application to communicate with the BIOS regarding the new
405 image for the image update to take effect.
406 See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver.
409 tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
412 Say Y here if you want to support SMO88XX freefall devices
413 on Dell Latitude laptops.
415 To compile this driver as a module, choose M here: the module will
416 be called dell-smo8800.
419 tristate "Dell WMI notifications"
423 depends on ACPI_VIDEO || ACPI_VIDEO = n
424 depends on DELL_SMBIOS
425 select DELL_WMI_DESCRIPTOR
426 select INPUT_SPARSEKMAP
428 Say Y here if you want to support WMI-based hotkeys on Dell laptops.
430 To compile this driver as a module, choose M here: the module will
433 config DELL_WMI_DESCRIPTOR
438 tristate "WMI Hotkeys for Dell All-In-One series"
441 select INPUT_SPARSEKMAP
443 Say Y here if you want to support WMI-based hotkeys on Dell
446 To compile this driver as a module, choose M here: the module will
447 be called dell-wmi-aio.
450 tristate "External LED on Dell Business Netbooks"
451 depends on LEDS_CLASS
454 This adds support for the Latitude 2100 and similar
455 notebooks that have an external LED.
458 tristate "Fujitsu-Siemens Amilo rfkill support"
460 depends on SERIO_I8042
462 This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
465 config FUJITSU_LAPTOP
466 tristate "Fujitsu Laptop Extras"
469 depends on BACKLIGHT_CLASS_DEVICE
470 depends on ACPI_VIDEO || ACPI_VIDEO = n
471 select INPUT_SPARSEKMAP
475 This is a driver for laptops built by Fujitsu:
477 * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
478 * Possibly other Fujitsu laptop models
479 * Tested with S6410 and S7020
481 It adds support for LCD brightness control and some hotkeys.
483 If you have a Fujitsu laptop, say Y or M here.
485 config FUJITSU_TABLET
486 tristate "Fujitsu Tablet Extras"
490 This is a driver for tablets built by Fujitsu:
492 * Lifebook P1510/P1610/P1620/Txxxx
494 * Possibly other Fujitsu tablet models
496 It adds support for the panel buttons, docking station detection,
497 tablet/notebook mode detection for convertible and
498 orientation detection for docked slates.
500 If you have a Fujitsu convertible or slate, say Y or M here.
502 config GPD_POCKET_FAN
503 tristate "GPD Pocket Fan Controller support"
507 Driver for the GPD Pocket vendor specific FAN02501 ACPI device
508 which controls the fan speed on the GPD Pocket.
510 Without this driver the fan on the Pocket will stay off independent
511 of the CPU temperature. Say Y or M if the kernel may be used on a
515 tristate "HP laptop accelerometer"
516 depends on INPUT && ACPI
517 depends on SERIO_I8042
518 select SENSORS_LIS3LV02D
522 This driver provides support for the "Mobile Data Protection System 3D"
523 or "3D DriveGuard" feature of HP laptops. On such systems the driver
524 should load automatically (via ACPI alias).
526 Support for a led indicating disk protection will be provided as
527 hp::hddprotect. For more information on the feature, refer to
528 Documentation/misc-devices/lis3lv02d.rst.
530 To compile this driver as a module, choose M here: the module will
534 tristate "HP wireless button"
538 This driver provides supports for new HP wireless button for Windows 8.
539 On such systems the driver should load automatically (via ACPI alias).
541 To compile this driver as a module, choose M here: the module will
542 be called hp-wireless.
545 tristate "HP WMI extras"
548 depends on RFKILL || RFKILL = n
549 select INPUT_SPARSEKMAP
551 Say Y here if you want to support WMI-based hotkeys on HP laptops and
552 to read data from WMI such as docking or ambient light sensor state.
554 To compile this driver as a module, choose M here: the module will
558 tristate "HP Compaq TC1100 Tablet WMI Extras"
563 This is a driver for the WMI extensions (wireless and bluetooth power
564 control) of the HP Compaq TC1100 tablet.
567 tristate "Device driver to enable PRTL support"
570 Enable support for IBM Premium Real Time Mode (PRTM).
571 This module will allow you the enter and exit PRTM in the BIOS via
572 sysfs on platforms that support this feature. System in PRTM will
573 not receive CPU-generated SMIs for recoverable errors. Use of this
574 feature without proper support may void your hardware warranty.
576 If the proper BIOS support is found the driver will load and create
577 /sys/devices/system/ibm_rtl/. The "state" variable will indicate
578 whether or not the BIOS is in PRTM.
579 state = 0 (BIOS SMIs on)
580 state = 1 (BIOS SMIs off)
582 config IDEAPAD_LAPTOP
583 tristate "Lenovo IdeaPad Laptop Extras"
585 depends on RFKILL && INPUT
586 depends on SERIO_I8042
587 depends on BACKLIGHT_CLASS_DEVICE
588 depends on ACPI_VIDEO || ACPI_VIDEO = n
589 depends on ACPI_WMI || ACPI_WMI = n
590 select INPUT_SPARSEKMAP
592 This is a driver for Lenovo IdeaPad netbooks contains drivers for
593 rfkill switch, hotkey, fan control and backlight control.
596 tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
599 This driver provides support for the IBM Hard Drive Active Protection
600 System (hdaps), which provides an accelerometer and other misc. data.
601 ThinkPads starting with the R50, T41, and X40 are supported. The
602 accelerometer data is readable via sysfs.
604 This driver also provides an absolute input class device, allowing
605 the laptop to act as a pinball machine-esque joystick.
607 If your ThinkPad is not recognized by the driver, please update to latest
608 BIOS. This is especially the case for some R52 ThinkPads.
610 Say Y here if you have an applicable laptop and want to experience
611 the awesome power of hdaps.
614 tristate "ThinkPad ACPI Laptop Extras"
616 depends on ACPI_BATTERY
618 depends on RFKILL || RFKILL = n
619 depends on ACPI_VIDEO || ACPI_VIDEO = n
620 depends on BACKLIGHT_CLASS_DEVICE
626 select LEDS_TRIGGER_AUDIO
628 This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
629 support for Fn-Fx key combinations, Bluetooth control, video
630 output switching, ThinkLight control, UltraBay eject and more.
631 For more information about this driver see
632 <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
633 <http://ibm-acpi.sf.net/> .
635 This driver was formerly known as ibm-acpi.
637 Extra functionality will be available if the rfkill (CONFIG_RFKILL)
638 and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
639 Note that if you want ThinkPad-ACPI to be built-in instead of
640 modular, ALSA and rfkill will also have to be built-in.
642 If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
644 config THINKPAD_ACPI_ALSA_SUPPORT
645 bool "Console audio control ALSA interface"
646 depends on THINKPAD_ACPI
648 depends on SND = y || THINKPAD_ACPI = SND
651 Enables monitoring of the built-in console audio output control
652 (headphone and speakers), which is operated by the mute and (in
653 some ThinkPad models) volume hotkeys.
655 If this option is enabled, ThinkPad-ACPI will export an ALSA card
656 with a single read-only mixer control, which should be used for
657 on-screen-display feedback purposes by the Desktop Environment.
659 Optionally, the driver will also allow software control (the
660 ALSA mixer will be made read-write). Please refer to the driver
661 documentation for details.
663 All IBM models have both volume and mute control. Newer Lenovo
664 models only have mute control (the volume hotkeys are just normal
665 keys and volume control is done through the main HDA mixer).
667 config THINKPAD_ACPI_DEBUGFACILITIES
668 bool "Maintainer debug facilities"
669 depends on THINKPAD_ACPI
671 Enables extra stuff in the thinkpad-acpi which is completely useless
672 for normal use. Read the driver source to find out what it does.
674 Say N here, unless you were told by a kernel maintainer to do
677 config THINKPAD_ACPI_DEBUG
678 bool "Verbose debug mode"
679 depends on THINKPAD_ACPI
681 Enables extra debugging information, at the expense of a slightly
682 increase in driver size.
684 If you are not sure, say N here.
686 config THINKPAD_ACPI_UNSAFE_LEDS
687 bool "Allow control of important LEDs (unsafe)"
688 depends on THINKPAD_ACPI
690 Overriding LED state on ThinkPads can mask important
691 firmware alerts (like critical battery condition), or misled
692 the user into damaging the hardware (undocking or ejecting
693 the bay while buses are still active), etc.
695 LED control on the ThinkPad is write-only (with very few
696 exceptions on very ancient models), which makes it
697 impossible to know beforehand if important information will
698 be lost when one changes LED state.
700 Users that know what they are doing can enable this option
701 and the driver will allow control of every LED, including
702 the ones on the dock stations.
704 Never enable this option on a distribution kernel.
706 Say N here, unless you are building a kernel for your own
707 use, and need to control the important firmware LEDs.
709 config THINKPAD_ACPI_VIDEO
710 bool "Video output control support"
711 depends on THINKPAD_ACPI
714 Allows the thinkpad_acpi driver to provide an interface to control
715 the various video output ports.
717 This feature often won't work well, depending on ThinkPad model,
718 display state, video output devices in use, whether there is a X
719 server running, phase of the moon, and the current mood of
720 Schroedinger's cat. If you can use X.org's RandR to control
721 your ThinkPad's video output ports instead of this feature,
722 don't think twice: do it and say N here to save memory and avoid
723 bad interactions with X.org.
725 NOTE: access to this feature is limited to processes with the
726 CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
727 where it interacts badly with X.org.
729 If you are not sure, say Y here but do try to check if you could
730 be using X.org RandR instead.
732 config THINKPAD_ACPI_HOTKEY_POLL
733 bool "Support NVRAM polling for hot keys"
734 depends on THINKPAD_ACPI
737 Some thinkpad models benefit from NVRAM polling to detect a few of
738 the hot key press events. If you know your ThinkPad model does not
739 need to do NVRAM polling to support any of the hot keys you use,
740 unselecting this option will save about 1kB of memory.
742 ThinkPads T40 and newer, R52 and newer, and X31 and newer are
743 unlikely to need NVRAM polling in their latest BIOS versions.
745 NVRAM polling can detect at most the following keys: ThinkPad/Access
746 IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
747 Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
749 If you are not sure, say Y here. The driver enables polling only if
750 it is strictly necessary to do so.
752 config INTEL_ATOMISP2_LED
753 tristate "Intel AtomISP2 camera LED driver"
754 depends on GPIOLIB && LEDS_GPIO
756 Many Bay Trail and Cherry Trail devices come with a camera attached
757 to Intel's Image Signal Processor. Linux currently does not have a
758 driver for these, so they do not work as a camera. Some of these
759 camera's have a LED which is controlled through a GPIO.
761 Some of these devices have a firmware issue where the LED gets turned
762 on at boot. This driver will turn the LED off at boot and also allows
763 controlling the LED (repurposing it) through the sysfs LED interface.
765 Which GPIO is attached to the LED is usually not described in the
766 ACPI tables, so this driver contains per-system info about the GPIO
767 inside the driver, this means that this driver only works on systems
768 the driver knows about.
770 To compile this driver as a module, choose M here: the module
771 will be called intel_atomisp2_led.
773 config INTEL_ATOMISP2_PM
774 tristate "Intel AtomISP2 dummy / power-management driver"
775 depends on PCI && IOSF_MBI && PM
776 depends on !INTEL_ATOMISP
778 Power-management driver for Intel's Image Signal Processor found on
779 Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
780 is to turn the ISP off (put it in D3) to save power and to allow
781 entering of S0ix modes.
783 To compile this driver as a module, choose M here: the module
784 will be called intel_atomisp2_pm.
786 config INTEL_CHT_INT33FE
787 tristate "Intel Cherry Trail ACPI INT33FE Driver"
788 depends on X86 && ACPI && I2C && REGULATOR
789 depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
790 depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
791 depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
793 This driver add support for the INT33FE ACPI device found on
794 some Intel Cherry Trail devices.
796 There are two kinds of INT33FE ACPI device possible: for hardware
797 with USB Type-C and Micro-B connectors. This driver supports both.
799 The INT33FE ACPI device has a CRS table with I2cSerialBusV2
800 resources for Fuel Gauge Controller and (in the Type-C variant)
801 FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
802 This driver instantiates i2c-clients for these, so that standard
803 i2c drivers for these chips can bind to the them.
805 If you enable this driver it is advised to also select
806 CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
807 device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
810 config INTEL_HID_EVENT
811 tristate "INTEL HID Event"
814 select INPUT_SPARSEKMAP
816 This driver provides support for the Intel HID Event hotkey interface.
817 Some laptops require this driver for hotkey support.
819 To compile this driver as a module, choose M here: the module will
822 config INTEL_INT0002_VGPIO
823 tristate "Intel ACPI INT0002 Virtual GPIO driver"
824 depends on GPIOLIB && ACPI
825 select GPIOLIB_IRQCHIP
827 Some peripherals on Bay Trail and Cherry Trail platforms signal a
828 Power Management Event (PME) to the Power Management Controller (PMC)
829 to wakeup the system. When this happens software needs to explicitly
830 clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
833 This is modelled in ACPI through the INT0002 ACPI device, which is
834 called a "Virtual GPIO controller" in ACPI because it defines the
835 event handler to call when the PME triggers through _AEI and _L02
836 methods as would be done for a real GPIO interrupt in ACPI.
838 To compile this driver as a module, choose M here: the module will
839 be called intel_int0002_vgpio.
842 tristate "Thermal Management driver for Intel menlow platform"
843 depends on ACPI_THERMAL
846 ACPI thermal management enhancement driver on
847 Intel Menlow platform.
851 config INTEL_OAKTRAIL
852 tristate "Intel Oaktrail Platform Extras"
854 depends on ACPI_VIDEO || ACPI_VIDEO = n
855 depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
857 Intel Oaktrail platform need this driver to provide interfaces to
858 enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
859 here; it will only load on supported platforms.
862 tristate "INTEL VIRTUAL BUTTON"
865 select INPUT_SPARSEKMAP
867 This driver provides support for the Intel Virtual Button interface.
868 Some laptops require this driver for power button support.
870 To compile this driver as a module, choose M here: the module will
871 be called intel_vbtn.
874 tristate "Surface 3 WMI Driver"
880 Say Y here if you have a Surface 3.
882 To compile this driver as a module, choose M here: the module will
883 be called surface3-wmi.
885 config SURFACE_3_BUTTON
886 tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet"
887 depends on ACPI && KEYBOARD_GPIO && I2C
889 This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.
891 config SURFACE_3_POWER_OPREGION
892 tristate "Surface 3 battery platform operation region support"
893 depends on ACPI && I2C
895 This driver provides support for ACPI operation
896 region of the Surface 3 battery platform driver.
898 config SURFACE_PRO3_BUTTON
899 tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
900 depends on ACPI && INPUT
902 This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet.
905 tristate "MSI Laptop Extras"
907 depends on BACKLIGHT_CLASS_DEVICE
908 depends on ACPI_VIDEO || ACPI_VIDEO = n
910 depends on INPUT && SERIO_I8042
911 select INPUT_SPARSEKMAP
913 This is a driver for laptops built by MSI (MICRO-STAR
916 MSI MegaBook S270 (MS-1013)
917 Cytron/TCM/Medion/Tchibo MD96100/SAM2000
919 It adds support for Bluetooth, WLAN and LCD brightness control.
921 More information about this driver is available at
922 <http://0pointer.de/lennart/tchibo.html>.
924 If you have an MSI S270 laptop, say Y or M here.
927 tristate "MSI WMI extras"
930 depends on BACKLIGHT_CLASS_DEVICE
931 depends on ACPI_VIDEO || ACPI_VIDEO = n
932 select INPUT_SPARSEKMAP
934 Say Y here if you want to support WMI-based hotkeys on MSI laptops.
936 To compile this driver as a module, choose M here: the module will
940 tristate "OLPC XO-1.5 ebook switch"
941 depends on OLPC || COMPILE_TEST
942 depends on ACPI && INPUT
944 Support for the ebook switch on the OLPC XO-1.5 laptop.
946 This switch is triggered as the screen is rotated and folded down to
947 convert the device into ebook form.
950 tristate "OLPC XO-1 software RF kill switch"
951 depends on OLPC || COMPILE_TEST
954 Support for enabling/disabling the WLAN interface on the OLPC XO-1
957 config PCENGINES_APU2
958 tristate "PC Engines APUv2/3 front button and LEDs driver"
959 depends on INPUT && INPUT_KEYBOARD && GPIOLIB
960 depends on LEDS_CLASS
962 select KEYBOARD_GPIO_POLLED
965 This driver provides support for the front button and LEDs on
966 PC Engines APUv2/APUv3 board.
968 To compile this driver as a module, choose M here: the module
969 will be called pcengines-apuv2.
971 config SAMSUNG_LAPTOP
972 tristate "Samsung Laptop driver"
973 depends on RFKILL || RFKILL = n
974 depends on ACPI_VIDEO || ACPI_VIDEO = n
975 depends on BACKLIGHT_CLASS_DEVICE
979 This module implements a driver for a wide range of different
980 Samsung laptops. It offers control over the different
981 function keys, wireless LED, LCD backlight level.
983 It may also provide some sysfs files described in
984 <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
986 To compile this driver as a module, choose M here: the module
987 will be called samsung-laptop.
990 tristate "Samsung Q10 Extras"
992 select BACKLIGHT_CLASS_DEVICE
994 This driver provides support for backlight control on Samsung Q10
995 and related laptops, including Dell Latitude X200.
998 tristate "Toshiba Laptop Extras"
1003 depends on BACKLIGHT_CLASS_DEVICE
1005 depends on SERIO_I8042 || SERIO_I8042 = n
1006 depends on ACPI_VIDEO || ACPI_VIDEO = n
1007 depends on RFKILL || RFKILL = n
1009 select INPUT_SPARSEKMAP
1011 This driver adds support for access to certain system settings
1012 on "legacy free" Toshiba laptops. These laptops can be recognized by
1013 their lack of a BIOS setup menu and APM support.
1015 On these machines, all system configuration is handled through the
1016 ACPI. This driver is required for access to controls not covered
1017 by the general ACPI drivers, such as LCD brightness, video output,
1020 This driver differs from the non-ACPI Toshiba laptop driver (located
1021 under "Processor type and features") in several aspects.
1022 Configuration is accessed by reading and writing text files in the
1023 /proc tree instead of by program interface to /dev. Furthermore, no
1024 power management functions are exposed, as those are handled by the
1025 general ACPI drivers.
1027 More information about this driver is available at
1028 <http://memebeam.org/toys/ToshibaAcpiDriver>.
1030 If you have a legacy free Toshiba laptop (such as the Libretto L1
1033 config TOSHIBA_BT_RFKILL
1034 tristate "Toshiba Bluetooth RFKill switch support"
1036 depends on RFKILL || RFKILL = n
1038 This driver adds support for Bluetooth events for the RFKill
1039 switch on modern Toshiba laptops with full ACPI support and
1042 This driver handles RFKill events for the TOS6205 Bluetooth,
1043 and re-enables it when the switch is set back to the 'on'
1046 If you have a modern Toshiba laptop with a Bluetooth and an
1047 RFKill switch (such as the Portege R500), say Y.
1050 tristate "Toshiba HDD Active Protection Sensor"
1053 This driver adds support for the built-in accelerometer
1054 found on recent Toshiba laptops equipped with HID TOS620A
1057 This driver receives ACPI notify events 0x80 when the sensor
1058 detects a sudden move or a harsh vibration, as well as an
1059 ACPI notify event 0x81 whenever the movement or vibration has
1062 Also provides sysfs entries to get/set the desired protection
1063 level and resetting the HDD protection interface.
1065 If you have a recent Toshiba laptop with a built-in accelerometer
1069 tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
1072 select INPUT_SPARSEKMAP
1074 This driver adds hotkey monitoring support to some Toshiba models
1075 that manage the hotkeys via WMI events.
1077 WARNING: This driver is incomplete as it lacks a proper keymap and the
1078 *notify function only prints the ACPI event type value. Be warned that
1079 you will need to provide some information if you have a Toshiba model
1080 with WMI event hotkeys and want to help with the development of this
1083 If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
1086 tristate "CMPC Laptop Extras"
1087 depends on ACPI && INPUT
1088 depends on RFKILL || RFKILL=n
1089 select BACKLIGHT_CLASS_DEVICE
1091 Support for Intel Classmate PC ACPI devices, including some
1092 keys as input device, backlight device, tablet and accelerometer
1095 config COMPAL_LAPTOP
1096 tristate "Compal (and others) Laptop Extras"
1098 depends on BACKLIGHT_CLASS_DEVICE
1099 depends on ACPI_VIDEO || ACPI_VIDEO = n
1102 depends on POWER_SUPPLY
1104 This is a driver for laptops built by Compal, and some models by
1105 other brands (e.g. Dell, Toshiba).
1107 It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
1108 and battery charging level control.
1111 tristate "LG Laptop Extras"
1115 select INPUT_SPARSEKMAP
1119 This driver adds support for hotkeys as well as control of keyboard
1120 backlight, battery maximum charge level and various other ACPI
1123 If you have an LG Gram laptop, say Y or M here.
1125 config PANASONIC_LAPTOP
1126 tristate "Panasonic Laptop Extras"
1127 depends on INPUT && ACPI
1128 depends on BACKLIGHT_CLASS_DEVICE
1129 select INPUT_SPARSEKMAP
1131 This driver adds support for access to backlight control and hotkeys
1132 on Panasonic Let's Note laptops.
1134 If you have a Panasonic Let's note laptop (such as the R1(N variant),
1135 R2, R3, R5, T2, W2 and Y2 series), say Y.
1138 tristate "Sony Laptop Extras"
1140 depends on ACPI_VIDEO || ACPI_VIDEO = n
1141 depends on BACKLIGHT_CLASS_DEVICE
1145 This mini-driver drives the SNC and SPIC devices present in the ACPI
1146 BIOS of the Sony Vaio laptops.
1148 It gives access to some extra laptop functionalities like Bluetooth,
1149 screen brightness control, Fn keys and allows powering on/off some
1152 Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information.
1154 config SONYPI_COMPAT
1155 bool "Sonypi compatibility"
1156 depends on SONY_LAPTOP
1158 Build the sonypi driver compatibility code into the sony-laptop driver.
1160 config SYSTEM76_ACPI
1161 tristate "System76 ACPI Driver"
1165 select LEDS_TRIGGERS
1167 This is a driver for System76 laptops running open firmware. It adds
1168 support for Fn-Fx key combinations, keyboard backlight, and airplane mode
1171 If you have a System76 laptop running open firmware, say Y or M here.
1173 config TOPSTAR_LAPTOP
1174 tristate "Topstar Laptop Extras"
1177 select INPUT_SPARSEKMAP
1181 This driver adds support for hotkeys found on Topstar laptops.
1183 If you have a Topstar laptop, say Y or M here.
1185 config I2C_MULTI_INSTANTIATE
1186 tristate "I2C multi instantiate pseudo device driver"
1187 depends on I2C && ACPI
1189 Some ACPI-based systems list multiple i2c-devices in a single ACPI
1190 firmware-node. This driver will instantiate separate i2c-clients
1191 for each device in the firmware-node.
1193 To compile this driver as a module, choose M here: the module
1194 will be called i2c-multi-instantiate.
1197 tristate "Mellanox Technologies platform support"
1198 depends on I2C && REGMAP
1200 This option enables system support for the Mellanox Technologies
1201 platform. The Mellanox systems provide data center networking
1202 solutions based on Virtual Protocol Interconnect (VPI) technology
1203 enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
1206 If you have a Mellanox system, say Y or M here.
1208 config TOUCHSCREEN_DMI
1209 bool "DMI based touchscreen configuration info"
1210 depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
1211 select EFI_EMBEDDED_FIRMWARE if EFI
1213 Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
1214 do not have enough data in ACPI tables for the touchscreen driver to
1215 handle the touchscreen properly, as OEMs expect the data to be baked
1216 into the tablet model specific version of the driver shipped with the
1217 the OS-image for the device. This option supplies the missing info.
1218 Enable this for x86 tablets with Silead or Chipone touchscreens.
1221 bool "Intel Isolated Memory Region support"
1222 depends on X86_INTEL_QUARK && IOSF_MBI
1224 This option provides a means to manipulate Isolated Memory Regions.
1225 IMRs are a set of registers that define read and write access masks
1226 to prohibit certain system agents from accessing memory with 1 KiB
1229 IMRs make it possible to control read/write access to an address
1230 by hardware agents inside the SoC. Read and write masks can be
1233 - Dirty CPU snoop (write only)
1235 - PCI Virtual Channel 0/Virtual Channel 1
1239 Quark contains a set of eight IMR registers and makes use of those
1240 registers during its bootup process.
1242 If you are running on a Galileo/Quark say Y here.
1245 tristate "Intel Intelligent Power Sharing"
1246 depends on ACPI && PCI
1248 Intel Calpella platforms support dynamic power sharing between the
1249 CPU and GPU, maximizing performance in a given TDP. This driver,
1250 along with the CPU frequency and i915 drivers, provides that
1251 functionality. If in doubt, say Y here; it will only load on
1252 supported platforms.
1255 tristate "Intel Rapid Start Technology Driver"
1258 This driver provides support for modifying parameters on systems
1259 equipped with Intel's Rapid Start Technology. When put in an ACPI
1260 sleep state, these devices will wake after either a configured
1261 timeout or when the system battery reaches a critical state,
1262 automatically copying memory contents to disk. On resume, the
1263 firmware will copy the memory contents back to RAM and resume the OS
1266 config INTEL_SMARTCONNECT
1267 tristate "Intel Smart Connect disabling driver"
1270 Intel Smart Connect is a technology intended to permit devices to
1271 update state by resuming for a short period of time at regular
1272 intervals. If a user enables this functionality under Windows and
1273 then reboots into Linux, the system may remain configured to resume
1274 on suspend. In the absence of any userspace to support it, the system
1275 will then remain awake until something triggers another suspend.
1277 This driver checks to determine whether the device has Intel Smart
1278 Connect enabled, and if so disables it.
1280 source "drivers/platform/x86/intel_speed_select_if/Kconfig"
1282 config INTEL_TURBO_MAX_3
1283 bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
1284 depends on X86_64 && SCHED_MC_PRIO
1286 This driver reads maximum performance ratio of each CPU and set up
1287 the scheduler priority metrics. In this way scheduler can prefer
1288 CPU with higher performance to schedule tasks.
1289 This driver is only required when the system is not using Hardware
1290 P-States (HWP). In HWP mode, priority can be read from ACPI tables.
1292 config INTEL_UNCORE_FREQ_CONTROL
1293 tristate "Intel Uncore frequency control driver"
1296 This driver allows control of uncore frequency limits on
1297 supported server platforms.
1298 Uncore frequency controls RING/LLC (last-level cache) clocks.
1300 To compile this driver as a module, choose M here: the module
1301 will be called intel-uncore-frequency.
1303 config INTEL_BXTWC_PMIC_TMU
1304 tristate "Intel BXT Whiskey Cove TMU Driver"
1306 depends on MFD_INTEL_PMC_BXT
1307 depends on INTEL_SOC_PMIC_BXTWC
1309 Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
1310 This driver enables the alarm wakeup functionality in the TMU unit
1311 of Whiskey Cove PMIC.
1313 config INTEL_CHTDC_TI_PWRBTN
1314 tristate "Intel Cherry Trail Dollar Cove TI power button driver"
1315 depends on INTEL_SOC_PMIC_CHTDC_TI
1318 This option adds a power button driver driver for Dollar Cove TI
1319 PMIC on Intel Cherry Trail devices.
1321 To compile this driver as a module, choose M here: the module
1322 will be called intel_chtdc_ti_pwrbtn.
1324 config INTEL_MFLD_THERMAL
1325 tristate "Thermal driver for Intel Medfield platform"
1326 depends on MFD_INTEL_MSIC && THERMAL
1328 Say Y here to enable thermal driver support for the Intel Medfield
1331 config INTEL_MID_POWER_BUTTON
1332 tristate "power button driver for Intel MID platforms"
1333 depends on INTEL_SCU && INPUT
1335 This driver handles the power button on the Intel MID platforms.
1339 config INTEL_MRFLD_PWRBTN
1340 tristate "Intel Merrifield Basin Cove power button driver"
1341 depends on INTEL_SOC_PMIC_MRFLD
1344 This option adds a power button driver for Basin Cove PMIC
1345 on Intel Merrifield devices.
1347 To compile this driver as a module, choose M here: the module
1348 will be called intel_mrfld_pwrbtn.
1350 config INTEL_PMC_CORE
1351 tristate "Intel PMC Core driver"
1354 The Intel Platform Controller Hub for Intel Core SoCs provides access
1355 to Power Management Controller registers via a PCI interface. This
1356 driver can utilize debugging capabilities and supported features as
1357 exposed by the Power Management Controller.
1360 - SLP_S0_RESIDENCY counter
1361 - PCH IP Power Gating status
1363 - MPHY/PLL gating status (Sunrisepoint PCH only)
1365 config INTEL_PUNIT_IPC
1366 tristate "Intel P-Unit IPC Driver"
1368 This driver provides support for Intel P-Unit Mailbox IPC mechanism,
1369 which is used to bridge the communications between kernel and P-Unit.
1371 config INTEL_SCU_IPC
1376 select INTEL_SCU_IPC
1378 config INTEL_SCU_PCI
1379 bool "Intel SCU PCI driver"
1383 This driver is used to bridge the communications between kernel
1384 and SCU on some embedded Intel x86 platforms. It also creates
1385 devices that are connected to the SoC through the SCU.
1386 Platforms supported:
1393 config INTEL_SCU_PLATFORM
1394 tristate "Intel SCU platform driver"
1398 This driver is used to bridge the communications between kernel
1399 and SCU (sometimes called PMC as well). The driver currently
1400 supports Intel Elkhart Lake and compatible platforms.
1402 config INTEL_SCU_IPC_UTIL
1403 tristate "Intel SCU IPC utility driver"
1404 depends on INTEL_SCU
1406 The IPC Util driver provides an interface with the SCU enabling
1407 low level access for debug work and updating the firmware. Say
1408 N unless you will be doing this on an Intel MID platform.
1410 config INTEL_TELEMETRY
1411 tristate "Intel SoC Telemetry Driver"
1413 depends on MFD_INTEL_PMC_BXT
1414 depends on INTEL_PUNIT_IPC
1416 This driver provides interfaces to configure and use
1417 telemetry for INTEL SoC from APL onwards. It is also
1418 used to get various SoC events and parameters
1419 directly via debugfs files. Various tools may use
1420 this interface for SoC state monitoring.
1422 endif # X86_PLATFORM_DEVICES